leandrof/u-boot
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
37bb6d89de
u-boot/MAINTAINERS

1201 lines
23 KiB
Plaintext
Raw Normal View History

Initial revision
2002-11-02 22:58:18 +00:00
#########################################################################
# #
# Regular Maintainers for U-Boot board support: #
# #
# For any board without permanent maintainer, please contact #
# Wolfgang Denk <wd@denx.de> #
Update mailing list email and archive addresses Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
2008-09-10 14:18:34 +00:00
# and Cc: the <u-boot@lists.denx.de> mailing list. #
Initial revision
2002-11-02 22:58:18 +00:00
# #
# Note: lists sorted by Maintainer Name #
#########################################################################
#########################################################################
* Patch by Rune Torgersen, 13 Feb 2003: Add support for Motorola MPC8266ADS board * Patch by Kyle Harris, 19 Feb 2003: patches for the Intel lubbock board: memsetup.S - general cleanup (based on Robert's csb226 code) flash.c - overhaul, actually works now lubbock.c - fix init funcs to return proper value * Patch by Kenneth Johansson, 26 Feb 2003: - Fixed off by one in RFTA calculation. - No need to abort when LDF is lower than we can program it's only minimum timing so clamp it to what we can do. - Takes function pointer to function for reading the spd_nvram. Usefull for faking data or hardcode a module without the nvram. - fix other user for above change - fix some comments. * Patches by Brian Waite, 26 Feb 2003: - fix port for evb64260 board - fix PCI for evb64260 board - fix PCI scan * Patch by Reinhard Meyer, 1 Mar 2003: Add support for EMK TOP860 Module * Patch by Yuli Barcohen, 02 Mar 2003: Add SPD EEPROM support for MPC8260ADS board
2003-03-06 00:58:30 +00:00
# PowerPC Systems: #
Initial revision
2002-11-02 22:58:18 +00:00
# #
# Maintainer Name, Email Address #
Add last known maintainer for orphaned boards; reformat. Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-07-13 12:58:16 +00:00
# Board CPU #
Initial revision
2002-11-02 22:58:18 +00:00
#########################################################################
85xx: Add support for P2020RDB board The code base adds P1 & P2 RDB platforms support. The folder and file names can cater to future SOCs of P1/P2 family. P1 & P2 processors are 85xx platforms, part of Freescale QorIQ series. Tested following on P2020RDB: 1. eTSECs 2. DDR, NAND, NOR, I2C. Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-08-05 07:59:24 +00:00
Poonam Aggrwal <poonam.aggrwal@freescale.com>
P2020RDB P2020
Initial revision
2002-11-02 22:58:18 +00:00
Greg Allen <gallen@arlut.utexas.edu>
Add last known maintainer for orphaned boards; reformat. Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-07-13 12:58:16 +00:00
UTX8245 MPC8245
Initial revision
2002-11-02 22:58:18 +00:00
Pantelis Antoniou <panto@intracom.gr>
Add last known maintainer for orphaned boards; reformat. Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-07-13 12:58:16 +00:00
NETVIA MPC8xx
Initial revision
2002-11-02 22:58:18 +00:00
some new esd boards added
2004-12-16 18:44:40 +00:00
Reinhard Arlt <reinhard.arlt@esd-electronics.com>
Add last known maintainer for orphaned boards; reformat. Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-07-13 12:58:16 +00:00
cpci5200 MPC5200
mpc512x: Add esd gmbh mecp5123 board support MECP5123 is a MPC5121E based module by esd gmbh. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Reinhard Arlt <reinhard.arlt@esd-electronics.com>
2009-06-09 09:50:40 +00:00
mecp5123 MPC5121
Add last known maintainer for orphaned boards; reformat. Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-07-13 12:58:16 +00:00
mecp5200 MPC5200
pf5200 MPC5200
Add esd cpci5200 and pf5200 boards Patch by Reinhard Arlt, 22 Aug 2005
2005-08-22 15:51:53 +00:00
mpc83xx: Add support for MPC8349 esd caddy2 The caddy2 is a variant of the already supported vme8349. So we just add the differences to this board port. To better support those two boards we switched from fixed SDRAM configuration to usage of spd_sdram(). This is done by providing a board specific SPD EEPROM routine with different values for both boards. Signed-off-by: Reinhard Arlt <reinhard.arlt@esd.eu> Signed-off-by: Stefan Roese <sr@denx.de> changed to use mkconfig -t option instead, plus misc codingstyle fixes. Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2009-12-08 08:13:08 +00:00
caddy2 MPC8349
mpc83xx: Add esd VME8349 board support This patch adds support for the esd VME8349 board equipped with the MPC8349. It's a VME PMC carrier board equipped with the Tundra TSI148 VME-bridge. Signed-off-by: Reinhard Arlt <reinhard.arlt@esd-electronics.com> Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2009-07-25 04:19:12 +00:00
vme8349 MPC8349
Add last known maintainer for orphaned boards; reformat. Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-07-13 12:58:16 +00:00
CPCI750 PPC750FX/GX
some new esd boards added
2004-12-16 18:44:40 +00:00
ARMV7: Add support For Logic OMAP35x/DM37x modules This patch adds basic support for OMAP35x/DM37x SOM LV/Torpedo reference boards. It assumes U-boot is loaded to SDRAM with the help of another small bootloader (x-load) running from SRAM. Signed-off-by: Peter Barada <peter.barada@logicpd.com> Cc: Tom Rini <tom.rini@gmail.com> Cc: Igor Grinberg <grinberg@compulab.co.il> Cc: Wolfgang Denk <wd@denx.de> Acked-by: Igor Grinberg <grinberg@compulab.co.il>
2011-12-19 19:54:51 +00:00
Peter Barada <peter.barada@logicpd.com>
omap3_logic ARM ARMV7 (Logic OMAP35xx/DM37xx)
* Patch by Scott McNutt, 04 Oct 2003: - add support for Altera Nios-32 CPU - add support for Nios Cyclone Development Kit (DK-1C20) * Patch by Steven Scholz, 29 Sep 2003: - A second parameter for bootm overwrites the load address for "Standalone Application" images. - bootm sets environment variable "filesize" to the resulting (uncompressed) data length for "Standalone Application" images when autostart is set to "no". Now you can do something like if bootm $fpgadata $some_free_ram ; then fpga load 0 $some_free_ram $filesize fi * Patch by Denis Peter, 25 Sept 2003: add support for the MIP405 Rev. C board
2003-10-08 23:26:14 +00:00
Yuli Barcohen <yuli@arabellasw.com>
Add last known maintainer for orphaned boards; reformat. Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-07-13 12:58:16 +00:00
Adder MPC87x/MPC852T
ep8248 MPC8248
ISPAN MPC8260
MPC8260ADS MPC826x/MPC827x/MPC8280
Rattler MPC8248
ZPC1900 MPC8265
* Patch by Scott McNutt, 04 Oct 2003: - add support for Altera Nios-32 CPU - add support for Nios Cyclone Development Kit (DK-1C20) * Patch by Steven Scholz, 29 Sep 2003: - A second parameter for bootm overwrites the load address for "Standalone Application" images. - bootm sets environment variable "filesize" to the resulting (uncompressed) data length for "Standalone Application" images when autostart is set to "no". Now you can do something like if bootm $fpgadata $some_free_ram ; then fpga load 0 $some_free_ram $filesize fi * Patch by Denis Peter, 25 Sept 2003: add support for the MIP405 Rev. C board
2003-10-08 23:26:14 +00:00
mpc83xx: add MAINTAINER and MAKEALL entries for the mpc8323erdb and reorder the existing 83xx maintainers alpha. Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2007-08-16 03:30:05 +00:00
Michael Barkowski <michael.barkowski@freescale.com>
Add last known maintainer for orphaned boards; reformat. Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-07-13 12:58:16 +00:00
MPC8323ERDB MPC8323
mpc83xx: add MAINTAINER and MAKEALL entries for the mpc8323erdb and reorder the existing 83xx maintainers alpha. Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2007-08-16 03:30:05 +00:00
* Add support for Promess ATC board * Patch by Keith Outwater, 28 Apr 2003: - Miscellaneous corrections and additions to GEN860T board specific code. - Added GEN860_SC variant to GEN860T. - Miscellaneous corrections to GEN860T documentation. - Correct duplicate entry in U-Boot CREDITS file. - Add GEN860T_SC entry in MAINTAINERS file. - Update CREDITS file with GEN860T_SC info. * Update Smiths Aerospace addresses in MAINTAINERS file * Fix error handling in hush's version of "run" command
2003-05-03 15:50:43 +00:00
Jerry Van Baren <gerald.vanbaren@smiths-aerospace.com>
Initial revision
2002-11-02 22:58:18 +00:00
Add last known maintainer for orphaned boards; reformat. Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-07-13 12:58:16 +00:00
sacsng MPC8260
Initial revision
2002-11-02 22:58:18 +00:00
Oliver Brown <obrown@adventnetworks.com>
Add last known maintainer for orphaned boards; reformat. Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-07-13 12:58:16 +00:00
gw8260 MPC8260
Initial revision
2002-11-02 22:58:18 +00:00
TI: TNETV107X EVM initial support TNETV107X is a Texas Instruments SoC based on an ARM1176 core, and with a bunch on on-chip integrated peripherals. This patch adds support for the TNETV107X EVM board. Signed-off-by: Cyril Chemparathy <cyril@ti.com> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
2010-06-07 18:13:36 +00:00
Cyril Chemparathy <cyril@ti.com>
tnetv107x_evm tnetv107x
Initial revision
2002-11-02 22:58:18 +00:00
Conn Clark <clark@esteem.com>
Add last known maintainer for orphaned boards; reformat. Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-07-13 12:58:16 +00:00
ESTEEM192E MPC8xx
Initial revision
2002-11-02 22:58:18 +00:00
dreamplug: initial board support. Copied wholeheartedly from board/Marvell/guruplug and modified to add support for SPI NOR flash. CONFIG_MACH_DREAMPLUG defined in include/configs/dreamplug.h until Linus's kernel.org tree adds it to mach-types.h. Once it trickles down, the definition can be removed from include/configs/dreamplug.h. Signed-off-by: Jason Cooper <u-boot@lakedaemon.net>
2011-10-03 08:19:53 +00:00
Jason Cooper <u-boot@lakedaemon.net>
dreamplug ARM926EJS (Kirkwood SoC)
Add support for the MPC837xERDB MPC837xERDB board support includes: * DDR2 330MHz hardcoded (soldered on the board) * Local Bus NOR Flash * I2C, UART and RTC * eTSEC RGMII (TSEC0 - RTL8211B with MII; * TSEC1 - VSC7385 local bus, hardcoded, requires seperate firmware * load) Signed-off-by: Kevin Lam <kevin.lam@freescale.com> Signed-off-by: Joe D'Abbraccio <joe.d'abbraccio@freescale.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2008-01-16 06:38:05 +00:00
Joe D'Abbraccio <ljd015@freescale.com>
Add last known maintainer for orphaned boards; reformat. Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-07-13 12:58:16 +00:00
MPC837xERDB MPC837x
Add support for the MPC837xERDB MPC837xERDB board support includes: * DDR2 330MHz hardcoded (soldered on the board) * Local Bus NOR Flash * I2C, UART and RTC * eTSEC RGMII (TSEC0 - RTL8211B with MII; * TSEC1 - VSC7385 local bus, hardcoded, requires seperate firmware * load) Signed-off-by: Kevin Lam <kevin.lam@freescale.com> Signed-off-by: Joe D'Abbraccio <joe.d'abbraccio@freescale.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2008-01-16 06:38:05 +00:00
Convert ISO-8859 files to UTF-8 There was a mix of UTF-8 and ISO-8859 files in the U-Boot source tree, which could cause issues with the patchwork review system. This commit converts all ISO-8859 files to UTF-8. Signed-off-by: Albert ARIBAUD <albert.u.boot@aribaud.net>
2011-08-04 16:45:45 +00:00
Kári Davíðsson <kd@flaga.is>
Initial revision
2002-11-02 22:58:18 +00:00
Add last known maintainer for orphaned boards; reformat. Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-07-13 12:58:16 +00:00
FLAGADM MPC823
Initial revision
2002-11-02 22:58:18 +00:00
* Patch by Markus Pietrek, 24 Feb 2004: NS9750 DevBoard added * Patch by Pierre AUBERT, 24 Feb 2004 add USB support for MPC5200 * Patch by Steven Scholz, 24 Feb 2004: - fix MII commands to use values from last command * Patch by Torsten Demke, 24 Feb 2004: Add support for the eXalion platform (SPSW-8240, F-30, F-300)
2004-02-26 23:46:20 +00:00
Torsten Demke <torsten.demke@fci.com>
Add last known maintainer for orphaned boards; reformat. Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-07-13 12:58:16 +00:00
eXalion MPC824x
* Patch by Markus Pietrek, 24 Feb 2004: NS9750 DevBoard added * Patch by Pierre AUBERT, 24 Feb 2004 add USB support for MPC5200 * Patch by Steven Scholz, 24 Feb 2004: - fix MII commands to use values from last command * Patch by Torsten Demke, 24 Feb 2004: Add support for the eXalion platform (SPSW-8240, F-30, F-300)
2004-02-26 23:46:20 +00:00
Initial revision
2002-11-02 22:58:18 +00:00
Wolfgang Denk <wd@denx.de>
Add last known maintainer for orphaned boards; reformat. Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-07-13 12:58:16 +00:00
IceCube_5200 MPC5200
MPC512x: add support for ARIA board ARIA is a MPC5121E based COM Express module by Dave/DENX. Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: John Rigby <jcrigby@gmail.com>
2009-05-16 08:47:46 +00:00
ARIA MPC5121e
Add last known maintainer for orphaned boards; reformat. Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-07-13 12:58:16 +00:00
AMX860 MPC860
ETX094 MPC850
FPS850L MPC850
FPS860L MPC860
ICU862 MPC862
IP860 MPC860
IVML24 MPC860
IVML24_128 MPC860
IVML24_256 MPC860
IVMS8 MPC860
IVMS8_128 MPC860
IVMS8_256 MPC860
LANTEC MPC850
LWMON MPC823
R360MPI MPC823
RRvision MPC823
SM850 MPC850
SPD823TS MPC823
TQM823L MPC823
TQM823L_LCD MPC823
TQM850L MPC850
TQM855L MPC855
TQM860L MPC860
TQM860L_FEC MPC860
c2mon MPC855
hermes MPC860
lwmon MPC823
CU824 MPC8240
Sandpoint8240 MPC8240
ATC MPC8250
PM825 MPC8250
TQM8255 MPC8255
CPU86 MPC8260
PM826 MPC8260
TQM8260 MPC8260
P3G4 MPC7410
PCIPPC2 MPC750
PCIPPC6 MPC750
sh: Add Renesas rsk7264 board The rsk7264 (also know as rsk2+sh7264) is an SH2A based board with 64MB NAND flash and 64MB SDRAM. It is very similar to the rsk7203 board. Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2011-06-01 06:35:13 +00:00
Phil Edworthy <phil.edworthy@renesas.com>
rsk7264 SH7264
Ethernut 5 board support Add support for the Ethernut 5 open hardware design, based on Atmel's AT91SAM9XE512 SoC. V4 - Fix several coding style issues. - Move machine type to config file. - Remove use of CONFIG_ATMEL_LEGACY. Signed-off-by: Tim Schendekehl <tim.schendekehl@egnite.de>
2011-11-01 23:55:01 +00:00
egnite GmbH <info@egnite.de>
ethernut5 ARM926EJS (AT91SAM9XE SoC)
ppc4xx: Add GDSys neo 405EP board support Signed-off-by: Dirk Eibach <eibach@gdsys.de> Signed-off-by: Stefan Roese <sr@denx.de>
2008-10-08 13:37:50 +00:00
Dirk Eibach <eibach@gdsys.de>
ppc4xx: Add GDsys CompactCenter board support. Board support for the Guntermann & Drunck CompactCenter and DevCon-Center. Based on the AMCC Canyonlands board support by Stefan Roese. Signed-off-by: Dirk Eibach <eibach@gdsys.de> Signed-off-by: Stefan Roese <sr@denx.de>
2009-07-27 06:49:48 +00:00
devconcenter PPC460EX
ppc4xx: Add DL-Vision 405EP board support Board support for the Guntermann & Drunck DL-Vision. Signed-off-by: Dirk Eibach <eibach@gdsys.de> Signed-off-by: Stefan Roese <sr@denx.de>
2009-07-17 12:16:40 +00:00
dlvision PPC405EP
ppc4xx: Add DLVision-10G board support Board support for the Guntermann & Drunck DLVision-10G. Adds support for multiple FPGAs per board for gdsys 405ep architecture. Adds support for dual link osd hardware for gdsys 405ep. Signed-off-by: Dirk Eibach <eibach@gdsys.de> Signed-off-by: Stefan Roese <sr@denx.de>
2011-01-21 08:31:21 +00:00
dlvision-10g PPC405EP
ppc4xx: Add GDsys PowerPC 440 ETX board support. Board support for the Guntermann & Drunck PowerPC 440 ETX module. Based on the AMCC Yosemite board support by Stefan Roese. Signed-off-by: Dirk Eibach <eibach@gdsys.de> Signed-off-by: Stefan Roese <sr@denx.de>
2008-12-09 12:12:40 +00:00
gdppc440etx PPC440EP/GR
ppc4xx: Rename compactcenter to intip Signed-off-by: Dirk Eibach <eibach@gdsys.de> Signed-off-by: Stefan Roese <sr@denx.de>
2009-09-09 10:36:07 +00:00
intip PPC460EX
ppc4xx: Add Io and IoCon 405EP board support Board support for the Guntermann & Drunck CATCenter Io. Board support for the Guntermann & Drunck IoCon. Signed-off-by: Dirk Eibach <eibach@gdsys.de> Signed-off-by: Stefan Roese <sr@denx.de>
2010-10-21 08:50:05 +00:00
io PPC405EP
ppc4xx: Add Io64 board support Board support for the Guntermann & Drunck Io64. Signed-off-by: Dirk Eibach <eibach@gdsys.de> Signed-off-by: Stefan Roese <sr@denx.de>
2011-10-20 09:12:55 +00:00
io64 PPC405EX
ppc4xx: Add Io and IoCon 405EP board support Board support for the Guntermann & Drunck CATCenter Io. Board support for the Guntermann & Drunck IoCon. Signed-off-by: Dirk Eibach <eibach@gdsys.de> Signed-off-by: Stefan Roese <sr@denx.de>
2010-10-21 08:50:05 +00:00
iocon PPC405EP
ppc4xx: Add GDSys neo 405EP board support Signed-off-by: Dirk Eibach <eibach@gdsys.de> Signed-off-by: Stefan Roese <sr@denx.de>
2008-10-08 13:37:50 +00:00
neo PPC405EP
Initial revision
2002-11-02 22:58:18 +00:00
Dave Ellis <DGE@sixnetio.com>
Add last known maintainer for orphaned boards; reformat. Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-07-13 12:58:16 +00:00
SXNI855T MPC8xx
Initial revision
2002-11-02 22:58:18 +00:00
* Patch by Thomas Frieden, 13 Nov 2002: Add code for AmigaOne board (preliminary merge to U-Boot, still WIP) * Patch by Jon Diekema, 12 Nov 2002: - Adding URL for IEEE OUI lookup - Making the autoboot #defines dependent on CONFIG_AUTOBOOT_KEYED being defined. - In the CONFIG_EXTRA_ENV_SETTINGS #define, the root-on-initrd and root-on-nfs macros are designed to switch how the default boot method gets defined.
2002-11-19 11:04:11 +00:00
Thomas Frieden <ThomasF@hyperion-entertainment.com>
Add last known maintainer for orphaned boards; reformat. Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-07-13 12:58:16 +00:00
AmigaOneG3SE MPC7xx
* Patch by Thomas Frieden, 13 Nov 2002: Add code for AmigaOne board (preliminary merge to U-Boot, still WIP) * Patch by Jon Diekema, 12 Nov 2002: - Adding URL for IEEE OUI lookup - Making the autoboot #defines dependent on CONFIG_AUTOBOOT_KEYED being defined. - In the CONFIG_EXTRA_ENV_SETTINGS #define, the root-on-initrd and root-on-nfs macros are designed to switch how the default boot method gets defined.
2002-11-19 11:04:11 +00:00
Cleanup build problems (on Fedora Core x86_64 build host)
2005-08-03 20:32:02 +00:00
Matthias Fuchs <matthias.fuchs@esd-electronics.com>
Add last known maintainer for orphaned boards; reformat. Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-07-13 12:58:16 +00:00
ADCIOP IOP480 (PPC401)
APC405 PPC405GP
AR405 PPC405GP
ASH405 PPC405EP
CANBT PPC405CR
CPCI2DP PPC405GP
CPCI405 PPC405GP
CPCI4052 PPC405GP
CPCI405AB PPC405GP
CPCI405DT PPC405GP
CPCIISER4 PPC405GP
DASA_SIM IOP480 (PPC401)
DP405 PPC405EP
DU405 PPC405GP
DU440 PPC440EPx
G2000 PPC405EP
HH405 PPC405EP
HUB405 PPC405EP
OCRTC PPC405GP
ORSG PPC405GP
PCI405 PPC405GP
PLU405 PPC405EP
PMC405 PPC405GP
ppc4xx: Add 405EP based PMC405DE board Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu> Signed-off-by: Stefan Roese <sr@denx.de>
2009-07-22 11:56:21 +00:00
PMC405DE PPC405EP
Add last known maintainer for orphaned boards; reformat. Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-07-13 12:58:16 +00:00
PMC440 PPC440EPx
VOH405 PPC405EP
VOM405 PPC405EP
WUH405 PPC405EP
CMS700 PPC405EP
Cleanup build problems (on Fedora Core x86_64 build host)
2005-08-03 20:32:02 +00:00
Marvell GuruPlug Board Support GuruPlug Standard: 1 Gb Ethernet, 2 USB 2.0 GuruPlug Plus: 2 Gb Ethernet, 2 USB 2.0, 1 eSATA, 1 uSD slot References: http://www.globalscaletechnologies.com/t-guruplugdetails.aspx http://plugcomputer.org This patch is for GuruPlug Plus, but it supports Standard version as well. Signed-off-by: Siddarth Gore <gores@marvell.com>
2010-03-18 14:55:40 +00:00
Siddarth Gore <gores@marvell.com>
guruplug ARM926EJS (Kirkwood SoC)
MPC8xxx: Update maintainer entry for Wind River sbc8xxx boards I've probably got the best chance of getting access to these boards in order to test things, and since Joe's e-mail is bouncing, update the MAINTAINERS entry to reflect this. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-12-13 19:46:43 +00:00
Paul Gortmaker <paul.gortmaker@windriver.com>
sbc8349 MPC8349
sbc8540 MPC8540
sbc8548 MPC8548
sbc8560 MPC8560
sbc8641d MPC8641D
Initial revision
2002-11-02 22:58:18 +00:00
Frank Gottschling <fgottschling@eltec.de>
Add last known maintainer for orphaned boards; reformat. Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-07-13 12:58:16 +00:00
MHPC MPC8xx
Initial revision
2002-11-02 22:58:18 +00:00
Wolfgang Grandegger <wg@denx.de>
mpc52xx: add support for the IPEK01 board This patch adds support for the board IPEK01 based on the MPC5200. The Futjitsu Lime graphics controller is configured in 16 bpp mode. Signed-off-by: Wolfgang Grandegger <wg@denx.de>
2009-10-23 10:03:16 +00:00
ipek01 MPC5200
Add last known maintainer for orphaned boards; reformat. Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-07-13 12:58:16 +00:00
PN62 MPC8240
IPHASE4539 MPC8260
SCM MPC8260
Initial revision
2002-11-02 22:58:18 +00:00
ARM: Add Calxeda Highbank platform Add basic support for Calxeda Highbank platform. Only minimal support with serial and SATA are included. Signed-off-by: Jason Hobbs <jason.hobbs@calxeda.com> Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>
2011-10-24 08:50:20 +00:00
Rob Herring <rob.herring@calxeda.com>
highbank highbank
* Add support for log buffer which can be passed to Linux kernel's syslog mechanism; used especially for POST results. * Patch by Klaus Heydeck, 31 Oct 2002: Add initial support for kup4k board
2002-11-05 16:35:14 +00:00
Klaus Heydeck <heydeck@kieback-peter.de>
Add last known maintainer for orphaned boards; reformat. Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-07-13 12:58:16 +00:00
KUP4K MPC855
KUP4X MPC859
* Add support for log buffer which can be passed to Linux kernel's syslog mechanism; used especially for POST results. * Patch by Klaus Heydeck, 31 Oct 2002: Add initial support for kup4k board
2002-11-05 16:35:14 +00:00
at91: add support for the PM9263 board of Ronetix GmbH The PM9263 board is based on the AT91SAM9263-EK board. Here is the page on Ronetix website: http://www.ronetix.at/starter_kit_9263.html Signed-off-by: Ilko Iliev <iliev@ronetix.at> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2009-04-16 19:30:48 +00:00
Ilko Iliev <iliev@ronetix.at>
at91: add support for the PM9261 board of Ronetix GmbH The PM9261 board is based on the AT91SAM9261-EK board. Here is the page on Ronetix website: http://www.ronetix.at/starter_kit_9261.html Signed-off-by: Ilko Iliev <iliev@ronetix.at> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2009-06-12 19:20:39 +00:00
PM9261 AT91SAM9261
at91: add support for the PM9263 board of Ronetix GmbH The PM9263 board is based on the AT91SAM9263-EK board. Here is the page on Ronetix website: http://www.ronetix.at/starter_kit_9263.html Signed-off-by: Ilko Iliev <iliev@ronetix.at> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2009-04-16 19:30:48 +00:00
PM9263 AT91SAM9263
add new board pm9g45 Add the new board PM9G45 from Ronetix GmbH. * AT91SAM9G45 MCU at 400Mhz. * 128MB DDR2 SDRAM * 256MB NAND * 10/100 MBits Ethernet DP83848 * Serial number chip DS2401 The board is made as SODIMM200 module. For more info www.ronatix.at or info@ronetix.at. Signed-off-by: Asen Dimov <dimov@ronetix.at>
2010-04-20 19:49:04 +00:00
PM9G45 ARM926EJS (AT91SAM9G45 SoC)
at91: add support for the PM9263 board of Ronetix GmbH The PM9263 board is based on the AT91SAM9263-EK board. Here is the page on Ronetix website: http://www.ronetix.at/starter_kit_9263.html Signed-off-by: Ilko Iliev <iliev@ronetix.at> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2009-04-16 19:30:48 +00:00
ppc4xx: Add the Harris QUAD100HD AMCC 405EP-based board Signed-off-by: Gary Jennejohn <garyj@denx.de> Signed-off-by: Stefan Roese <sr@denx.de>
2008-04-28 12:04:32 +00:00
Gary Jennejohn <garyj@denx.de>
Add last known maintainer for orphaned boards; reformat. Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-07-13 12:58:16 +00:00
quad100hd PPC405EP
ppc4xx: Add the Harris QUAD100HD AMCC 405EP-based board Signed-off-by: Gary Jennejohn <garyj@denx.de> Signed-off-by: Stefan Roese <sr@denx.de>
2008-04-28 12:04:32 +00:00
Fix Murray Jensen's mail address. Patch by Murray Jensen, 30 Jun 2005
2005-08-12 21:20:59 +00:00
Murray Jensen <Murray.Jensen@csiro.au>
Initial revision
2002-11-02 22:58:18 +00:00
Add last known maintainer for orphaned boards; reformat. Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-07-13 12:58:16 +00:00
cogent_mpc8xx MPC8xx
Initial revision
2002-11-02 22:58:18 +00:00
Add last known maintainer for orphaned boards; reformat. Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-07-13 12:58:16 +00:00
cogent_mpc8260 MPC8260
hymod MPC8260
Initial revision
2002-11-02 22:58:18 +00:00
Add support for Korat PPC440EPx board These patches add support for the PPC440EPx-based "Korat" board to U-Boot. They are based primarily on support for the Sequoia board. Signed-off-by: Larry Johnson <lrj@acm.org>
2007-12-27 16:28:51 +00:00
Larry Johnson <lrj@acm.org>
Add last known maintainer for orphaned boards; reformat. Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-07-13 12:58:16 +00:00
korat PPC440EPx
Add support for Korat PPC440EPx board These patches add support for the PPC440EPx-based "Korat" board to U-Boot. They are based primarily on support for the Sequoia board. Signed-off-by: Larry Johnson <lrj@acm.org>
2007-12-27 16:28:51 +00:00
MAINTAINERS: Keep list sorted. Signed-off-by: Detlev Zundel <dzu@denx.de>
2009-03-27 14:03:54 +00:00
Feng Kan <fkan@amcc.com>
redwood PPC4xx
Initial revision
2002-11-02 22:58:18 +00:00
Brad Kemp <Brad.Kemp@seranoa.com>
Add last known maintainer for orphaned boards; reformat. Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-07-13 12:58:16 +00:00
ppmc8260 MPC8260
Initial revision
2002-11-02 22:58:18 +00:00
* Patches by Thomas Lange, 09 Oct 2003: - fix cmd_ide.c for non ppc boards (read/write functions did not add ATA base address) - fix for shannon board - #ifdef CONFIG_IDE_8xx_DIRECT some otherwise unused code * Patch by Sangmoon Kim, 07 Oct 2003: add support for debris board
2003-10-09 19:00:25 +00:00
Sangmoon Kim <dogoil@etinsys.com>
Add last known maintainer for orphaned boards; reformat. Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-07-13 12:58:16 +00:00
debris MPC8245
KVME080 MPC8245
* Patches by Thomas Lange, 09 Oct 2003: - fix cmd_ide.c for non ppc boards (read/write functions did not add ATA base address) - fix for shannon board - #ifdef CONFIG_IDE_8xx_DIRECT some otherwise unused code * Patch by Sangmoon Kim, 07 Oct 2003: add support for debris board
2003-10-09 19:00:25 +00:00
* Patch by Josef Wagner, 12 Mar 2003: - 16/32 MB and 50/80 MHz support with auto-detection for IP860 - ETH05 and BEDBUG support for CU824 - added support for MicroSys CPC45 - new BOOTROM/FLASH0 and DOC base for PM826 * Patch by Robert Schwebel, 12 Mar 2003: Fix the chpart command on innokom board * Name cleanup: mv include/asm-i386/ppcboot-i386.h include/asm-i386/u-boot-i386.h s/PPCBoot/U-Boot/ in some files s/pImage/uImage/ in some files * Patch by Detlev Zundel, 15 Jan 2003: Fix '' command line quoting * Patch by The LEOX team, 19 Jan 2003: - add support for the ELPT860 board - add support for Dallas ds164x RTC
2003-03-12 10:41:04 +00:00
The LEOX team <team@leox.org>
Add last known maintainer for orphaned boards; reformat. Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-07-13 12:58:16 +00:00
ELPT860 MPC860T
* Patch by Josef Wagner, 12 Mar 2003: - 16/32 MB and 50/80 MHz support with auto-detection for IP860 - ETH05 and BEDBUG support for CU824 - added support for MicroSys CPC45 - new BOOTROM/FLASH0 and DOC base for PM826 * Patch by Robert Schwebel, 12 Mar 2003: Fix the chpart command on innokom board * Name cleanup: mv include/asm-i386/ppcboot-i386.h include/asm-i386/u-boot-i386.h s/PPCBoot/U-Boot/ in some files s/pImage/uImage/ in some files * Patch by Detlev Zundel, 15 Jan 2003: Fix '' command line quoting * Patch by The LEOX team, 19 Jan 2003: - add support for the ELPT860 board - add support for Dallas ds164x RTC
2003-03-12 10:41:04 +00:00
MAINTAINERS: sort entries Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-08-10 22:17:52 +00:00
Guennadi Liakhovetski <g.liakhovetski@gmx.de>
linkstation MPC8241
mpc83xx: add MAINTAINER and MAKEALL entries for the mpc8323erdb and reorder the existing 83xx maintainers alpha. Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2007-08-16 03:30:05 +00:00
Dave Liu <daveliu@freescale.com>
Add last known maintainer for orphaned boards; reformat. Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-07-13 12:58:16 +00:00
MPC8315ERDB MPC8315
MPC832XEMDS MPC832x
MPC8360EMDS MPC8360
MPC837XEMDS MPC837x
mpc83xx: add MAINTAINER and MAKEALL entries for the mpc8323erdb and reorder the existing 83xx maintainers alpha. Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2007-08-16 03:30:05 +00:00
Cleanup build problems (on Fedora Core x86_64 build host)
2005-08-03 20:32:02 +00:00
Nye Liu <nyet@zumanetworks.com>
Add last known maintainer for orphaned boards; reformat. Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-07-13 12:58:16 +00:00
ZUMA MPC7xx_74xx
Cleanup build problems (on Fedora Core x86_64 build host)
2005-08-03 20:32:02 +00:00
MAINTAINERS: update responsible for MPC85xx/86xx Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: Kumar Gala <galak@kernel.crashing.org> Cc: Becky Bruce <beckyb@kernel.crashing.org>
2009-12-02 21:26:30 +00:00
Kumar Gala <kumar.gala@freescale.com>
Cleanup build problems (on Fedora Core x86_64 build host)
2005-08-03 20:32:02 +00:00
Add last known maintainer for orphaned boards; reformat. Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-07-13 12:58:16 +00:00
MPC8540ADS MPC8540
MPC8560ADS MPC8560
MPC8541CDS MPC8541
MPC8555CDS MPC8555
Cleanup build problems (on Fedora Core x86_64 build host)
2005-08-03 20:32:02 +00:00
Add last known maintainer for orphaned boards; reformat. Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-07-13 12:58:16 +00:00
MPC8641HPCN MPC8641D
Add myself as maintainer for MPC8641HPCN.
2006-08-29 13:17:14 +00:00
mpc83xx: New board support for SIMPC8313 This patch will create a new board, SIMPC8313, from Sheldon Instruments. This board boots from NAND devices and is configureable for either large or small page devices. The board supports non-soldered DDR2, one ethernet port, a Marvell 88E1118 PHY, and PCI host support. The board also has a FPGA connected to the eLBC providing glue logic to a TMS320C67xx DSP. Signed-off-by: Ron Madrid <ron_madrid@sbcglobal.net> Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2009-01-22 23:05:24 +00:00
Ron Madrid <info@sheldoninst.com>
SIMPC8313 MPC8313
Add support for STX GP3SSA (stxssa) Board Signed-off-by Dan Malek, <dan@embeddedalley.com>
2007-01-05 08:15:34 +00:00
Dan Malek <dan@embeddedalley.com>
Cleanup build problems (on Fedora Core x86_64 build host)
2005-08-03 20:32:02 +00:00
Add last known maintainer for orphaned boards; reformat. Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-07-13 12:58:16 +00:00
stxgp3 MPC85xx
stxssa MPC85xx
stxxtc MPC8xx
Cleanup build problems (on Fedora Core x86_64 build host)
2005-08-03 20:32:02 +00:00
Add support for Bluewater Systems Snapper 9260/9G20 modules Add support for Bluewater Systems AT91 based Snapper 9260 and 9G20 single board computer modules. Includes NAND flash and Ethernet support. Signed-off-by: Ryan Mallon <ryan@bluewatersys.com>
2011-06-05 07:21:22 +00:00
Ryan Mallon <ryan@bluewatersys.com>
snapper9260 ARM926EJS (AT91SAM9260 SoC)
snapper9g20 ARM926EJS (AT91SAM9G20 SoC)
Patch by Andrea Marson, 11 Jun 2004: Update for PPChameleon board: - support for SysClk @ 25MHz - support for Silicon Motion SM712 VGA controller - some clean ups
2004-07-01 21:40:08 +00:00
Andrea "llandre" Marson <andrea.marson@dave-tech.it>
PPChameleonEVB PPC405EP
Patch by Jon Loeliger, 17 June 2004: Completion of the 8540ADS/8560ADS updates: Fix some PCI and Rapid I/O memory maps, Initialize both TSEC 1 and 2, Initialize SDRAM Update MAINTAINER for 85xx boards and README.mpc85xxads
2004-07-09 23:27:13 +00:00
A4M072: Added support for the board. This patch provides support for the A4M072 board with the following features: UART NOR flash FEC Ethernet External SRAM I2C EEPROM CompactFlash cards on IDE/ATA port USB Host PCI initialization The 7-segment LED indicator is not yet supported. Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
2010-09-09 21:03:31 +00:00
Tirumala Marri <tmarri@apm.com>
bluestone APM821XX
AT91: add TOP9000 support Adds support for the EMK TOP9000 CPU Module which is based on ATMELs ARM926EJS AT91SAM9XE SoC. Signed-off-by: Reinhard Meyer <u-boot@emk-elektronik.de>
2010-10-30 23:09:58 +00:00
Reinhard Meyer <reinhard.meyer@emk-elektronik.de>
* Patch by Rune Torgersen, 13 Feb 2003: Add support for Motorola MPC8266ADS board * Patch by Kyle Harris, 19 Feb 2003: patches for the Intel lubbock board: memsetup.S - general cleanup (based on Robert's csb226 code) flash.c - overhaul, actually works now lubbock.c - fix init funcs to return proper value * Patch by Kenneth Johansson, 26 Feb 2003: - Fixed off by one in RFTA calculation. - No need to abort when LDF is lower than we can program it's only minimum timing so clamp it to what we can do. - Takes function pointer to function for reading the spd_nvram. Usefull for faking data or hardcode a module without the nvram. - fix other user for above change - fix some comments. * Patches by Brian Waite, 26 Feb 2003: - fix port for evb64260 board - fix PCI for evb64260 board - fix PCI scan * Patch by Reinhard Meyer, 1 Mar 2003: Add support for EMK TOP860 Module * Patch by Yuli Barcohen, 02 Mar 2003: Add SPD EEPROM support for MPC8260ADS board
2003-03-06 00:58:30 +00:00
Add last known maintainer for orphaned boards; reformat. Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-07-13 12:58:16 +00:00
TOP860 MPC860T
TOP5200 MPC5200
AT91: add TOP9000 support Adds support for the EMK TOP9000 CPU Module which is based on ATMELs ARM926EJS AT91SAM9XE SoC. Signed-off-by: Reinhard Meyer <u-boot@emk-elektronik.de>
2010-10-30 23:09:58 +00:00
TOP9000 ARM926EJS (AT91SAM9xxx SoC)
* Patch by Rune Torgersen, 13 Feb 2003: Add support for Motorola MPC8266ADS board * Patch by Kyle Harris, 19 Feb 2003: patches for the Intel lubbock board: memsetup.S - general cleanup (based on Robert's csb226 code) flash.c - overhaul, actually works now lubbock.c - fix init funcs to return proper value * Patch by Kenneth Johansson, 26 Feb 2003: - Fixed off by one in RFTA calculation. - No need to abort when LDF is lower than we can program it's only minimum timing so clamp it to what we can do. - Takes function pointer to function for reading the spd_nvram. Usefull for faking data or hardcode a module without the nvram. - fix other user for above change - fix some comments. * Patches by Brian Waite, 26 Feb 2003: - fix port for evb64260 board - fix PCI for evb64260 board - fix PCI scan * Patch by Reinhard Meyer, 1 Mar 2003: Add support for EMK TOP860 Module * Patch by Yuli Barcohen, 02 Mar 2003: Add SPD EEPROM support for MPC8260ADS board
2003-03-06 00:58:30 +00:00
mpc85xx: Add board support for the eXMeritus HWW-1U-1A devices The eXMeritus HWW-1U-1A unit is a DO-160-certified 13lb 1U chassis with 3 independent TEMPEST zones. Two independent P2020 computers may be found inside each zone. Complete hardware support is included. High-level hardware overview: * DO-160 certified for passenger aircraft (noncritical) * TEMPEST ceritified for RED/BLACK separation * 3 zones per chassis, 2 computers per zone (total of 6) * Dual-core 1.066GHz P2020 per computer * One 2GB DDR2 SO-RDIMM module per computer (upgradable to 4GB) * Removable 80GB or 160GB Intel X18-M SSD per computer * Front-accessible dual-port E1000E per computer * Front-accessible serial console per computer * Front-accessible USB port per computer * Internal Gigabit crossover within each TEMPEST zone * Internal unidirectional fiber links across TEMPEST zones * Battery-backed DS1339 I2C RTC on each CPU. Combined, each 13lb 1U chassis contains 12GB RAM, 12 cores @ 1.066GHz, 12 front-accessible Gigabit Ethernet ports and 960GB of solid-state storage with a total power consumption of ~200W. Additional notes: * SPD detection is only known to work with the DO-160-certified DIMMs * CPU reset is a little quirky due to hardware misfeature. Proper support for the hardware reset mechanism has been left for a later patch series to address. Signed-off-by: Kyle Moffett <Kyle.D.Moffett@boeing.com> Cc: Andy Fleming <afleming@gmail.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-12-07 21:39:16 +00:00
Kyle Moffett <Kyle.D.Moffett@boeing.com>
HWW1U1A P2020
* Patches by Reinhard Meyer, 14 Feb 2004: - update board/emk tree; use common flash driver - Corrected tested bits in machine check exception in cpu/mpc5xxx/traps.c [adapted for other PPC CPUs -- wd] - Added support for the M48T08 on the EVAL5200 board in rtc/mk48t59.c * Patch by Jon Diekema, 13 Feb 2004: Call show_boot_progress() whenever POST "FAILED" is printed. * Patch by Nishant Kamat, 13 Feb 2004: Add support for TI OMAP1610 H2 Board Fixes for cpu/arm926ejs/interrupt.c (based on Richard Woodruff's patch for arm925, 16 Oct 03) Fix for a timer bug in OMAP1610 Innovator Add support for CS0 (ROM)/CS3 (Flash) boot in OMAP1610 Innovator and H2 * Patches by Stephan Linz, 12 Feb 2004: - add support for NIOS timer with variable period preload counter value - prepare POST framework support for NIOS targets * Patch by Denis Peter, 11 Feb 2004: add POST support for the MIP405 board
2004-02-23 22:22:28 +00:00
Tolunay Orkun <torkun@nextio.com>
Cleanup build problems (on Fedora Core x86_64 build host)
2005-08-03 20:32:02 +00:00
Add last known maintainer for orphaned boards; reformat. Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-07-13 12:58:16 +00:00
csb272 PPC405GP
csb472 PPC405GP
* Patches by Reinhard Meyer, 14 Feb 2004: - update board/emk tree; use common flash driver - Corrected tested bits in machine check exception in cpu/mpc5xxx/traps.c [adapted for other PPC CPUs -- wd] - Added support for the M48T08 on the EVAL5200 board in rtc/mk48t59.c * Patch by Jon Diekema, 13 Feb 2004: Call show_boot_progress() whenever POST "FAILED" is printed. * Patch by Nishant Kamat, 13 Feb 2004: Add support for TI OMAP1610 H2 Board Fixes for cpu/arm926ejs/interrupt.c (based on Richard Woodruff's patch for arm925, 16 Oct 03) Fix for a timer bug in OMAP1610 Innovator Add support for CS0 (ROM)/CS3 (Flash) boot in OMAP1610 Innovator and H2 * Patches by Stephan Linz, 12 Feb 2004: - add support for NIOS timer with variable period preload counter value - prepare POST framework support for NIOS targets * Patch by Denis Peter, 11 Feb 2004: add POST support for the MIP405 board
2004-02-23 22:22:28 +00:00
Add support for AMCC 440SP, add support for AMCC Luan 440SP eval board. Patch by John Otken, 23 Nov 2005
2005-11-29 17:18:21 +00:00
John Otken <jotken@softadvances.com>
Add last known maintainer for orphaned boards; reformat. Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-07-13 12:58:16 +00:00
luan PPC440SP
taihu PPC405EP
Add support for AMCC 440SP, add support for AMCC Luan 440SP eval board. Patch by John Otken, 23 Nov 2005
2005-11-29 17:18:21 +00:00
Initial revision
2002-11-02 22:58:18 +00:00
Keith Outwater <Keith_Outwater@mvis.com>
Add last known maintainer for orphaned boards; reformat. Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-07-13 12:58:16 +00:00
GEN860T MPC860T
GEN860T_SC MPC860T
Initial revision
2002-11-02 22:58:18 +00:00
Frank Panno <fpanno@delphintech.com>
Add last known maintainer for orphaned boards; reformat. Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-07-13 12:58:16 +00:00
ep8260 MPC8260
Initial revision
2002-11-02 22:58:18 +00:00
Denis Peter <d.peter@mpl.ch>
Add last known maintainer for orphaned boards; reformat. Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-07-13 12:58:16 +00:00
MIP405 PPC4xx
PIP405 PPC4xx
Initial revision
2002-11-02 22:58:18 +00:00
mpc5200, digsy_mtc: add support for rev5 board version difference to previous board version: - M29W128GH flash from Numonyx - SDRAM ISSI IS45S16800 (Option A2 105°C) - rev5 uses RTC RV-3029-C2 - update cs0 and cs1 baseaddr and length depending on the detected flash size. - added Werner Pfister <Pfister_Werner@intercontrol.de> as maintainer for the digsy board variants - As the M29W128GH needs a special flash_cmd_reset() document that in the new file doc/README.cfi. - move "#endif /* CONFIG_CMD_IDE */" to the right place - remove LOWBOOT config option for digsy_mtc and digsy_mtc_rev5 boards - change doc/README.cfi as Stefan Roese suggested Signed-off-by: Heiko Schocher <hs@denx.de> Signed-off-by: Stefan Roese <sr@denx.de> Acked-by: Detlev Zundel <dzu@denx.de> cc: Wolfgang Denk <hs@denx.de> cc: Stefan Roese <sr@denx.de> cc: Werner Pfister <Pfister_Werner@intercontrol.de> cc: Detlev Zundel <dzu@denx.de>
2011-01-13 07:25:00 +00:00
Werner Pfister <Pfister_Werner@intercontrol.de>
digsy_mtc mpc5200
digsy_mtc_rev5 mpc5200
mpc83xx: add MAINTAINER and MAKEALL entries for the mpc8323erdb and reorder the existing 83xx maintainers alpha. Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2007-08-16 03:30:05 +00:00
Kim Phillips <kim.phillips@freescale.com>
Add last known maintainer for orphaned boards; reformat. Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-07-13 12:58:16 +00:00
MPC8349EMDS MPC8349
mpc83xx: add MAINTAINER and MAKEALL entries for the mpc8323erdb and reorder the existing 83xx maintainers alpha. Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2007-08-16 03:30:05 +00:00
A4M072: Added support for the board. This patch provides support for the A4M072 board with the following features: UART NOR flash FEC Ethernet External SRAM I2C EEPROM CompactFlash cards on IDE/ATA port USB Host PCI initialization The 7-segment LED indicator is not yet supported. Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
2010-09-09 21:03:31 +00:00
Sergei Poselenov <sposelenov@emcraft.com>
a4m072 MPC5200
TI: DaVinci: Add board specific code for da850 EVM Provides initial support for TI OMAP-L138/DA850 SoC devices on a Logic PD EVM board. Provides: Initial boot and configuration. Support for i2c. UART support (console). Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Acked-by: Ben Gardiner <bengardiner@nanometrics.ca> Reviewed-by: Wolfgang Denk <wd@denx.de> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
2010-06-10 09:48:15 +00:00
Sudhakar Rajashekhara <sudhakar.raj@ti.com>
da850evm ARM926EJS (DA850/OMAP-L138)
ppc4xx: ML507 Board Support The Xilinx ML507 Board is a Virtex 5 prototyping board that includes, among others: -Virtex 5 FX FPGA (With a ppc440x5 in it) -256MB of SDRAM2 -32MB of Flash -I2C Eeprom -System ACE chip -Serial ATA connectors -RS232 Level Conversors -Ethernet Transceiver This patch gives support to a standard design produced by EDK for this board: ppc440, uartlite, xilinx_int and flash - Includes Changes propossed by Stefan Roese and Michal Simek Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es> Acked-by: Stefan Roese <sr@denx.de>
2008-07-17 10:47:09 +00:00
Ricardo Ribalda <ricardo.ribalda@uam.es>
ml507 PPC440x5
ppc44x: Unification of virtex5 pp440 boards This patch provides an unificated way of handling xilinx v5 ppc440 boards. It unificates 3 different things: 1) Source code A new board called ppc440-generic has been created. This board includes a generic tlb initialization (Maps the whole memory into virtual) and defines board_pre_init, checkboard, initdram and get_sys_info weakly, so, they can be replaced by specific functions. If a new board needs to redefine any of the previous functions (specific initialization) it can create a new directory with the specific initializations needed. (see the example ml507 board). 2) Configuration file Common configurations are located under configs/xilinx-ppc440.h, this header file interpretes the xparameters file generated by EDK and configurates u-boot in correspondence. Example: if there is a Temac, allows CMD_CONFIG_NET Specific configuration are located under specific configuration file. (see the example ml507 board) 3) Makefile Some work has been done in order to not duplicate work in the Main Makefile. Please see the attached code. In order to support new boards they can be implemented in the next way: a) Simple Generic Board (90% of the time) Using EDK generates a new xparameters.h file, replace ppc440-generic/xparameters.h and run make xilinx-ppc440-generic_config && make b) Simple Boards with special u-boot parameters (9 % of the time) Create a new file under configs for it (use ml507.h as example) and change your paramaters. Create a new Makefile paragraph and compile c) Complex boards (1% of the time) Create a new folder for the board, like the ml507 Finally, it adds support for the Avnet FX30T Evaluation board, following the new generic structure: Cheap board by Avnet for evaluating the Virtex5 FX technology. This patch adds support for: - UartLite - 16MB Flash - 64MB RAM Prior using U-boot in this board, read carefully the ERRATA by Avnet to solve some memory initialization issues. Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es> Signed-off-by: Stefan Roese <sr@denx.de>
2008-09-01 17:09:39 +00:00
v5fx30teval PPC440x5
ppc4xx: Fix spelling error in MAINTAINERS file Signed-off-by: Stefan Roese <sr@denx.de>
2008-10-31 09:48:08 +00:00
xilinx-ppc405-generic PPC405
xilinx-ppc440-generic PPC440x5
ppc4xx: ML507 Board Support The Xilinx ML507 Board is a Virtex 5 prototyping board that includes, among others: -Virtex 5 FX FPGA (With a ppc440x5 in it) -256MB of SDRAM2 -32MB of Flash -I2C Eeprom -System ACE chip -Serial ATA connectors -RS232 Level Conversors -Ethernet Transceiver This patch gives support to a standard design produced by EDK for this board: ppc440, uartlite, xilinx_int and flash - Includes Changes propossed by Stefan Roese and Michal Simek Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es> Acked-by: Stefan Roese <sr@denx.de>
2008-07-17 10:47:09 +00:00
Cleanup build problems (on Fedora Core x86_64 build host)
2005-08-03 20:32:02 +00:00
Stefan Roese <sr@denx.de>
Initial revision
2002-11-02 22:58:18 +00:00
Add last known maintainer for orphaned boards; reformat. Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-07-13 12:58:16 +00:00
P3M7448 MPC7448
uc100 MPC857
TQM85xx MPC8540/8541/8555/8560
acadia PPC405EZ
alpr PPC440GX
bamboo PPC440EP
bunbinga PPC405EP
canyonlands PPC460EX
ebony PPC440GP
glacier PPC460GT
haleakala PPC405EXr
ppc4xx: Add support for ICON board (PPC440SPe) This patch adds support for the Mosaix Technologies, Inc. ICON board, based on the AppliedMicro (AMCC) PPC440SPe. It's equipped with an SODIMM (512MB standard) and 64MByte of NOR FLASH. Support for the onboard SM502 will be added later. Signed-off-by: Stefan Roese <sr@denx.de>
2010-04-27 09:37:28 +00:00
icon PPC440SPe
Add last known maintainer for orphaned boards; reformat. Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-07-13 12:58:16 +00:00
katmai PPC440SPe
kilauea PPC405EX
lwmon5 PPC440EPx
makalu PPC405EX
ocotea PPC440GX
p3p440 PPC440GP
pcs440ep PPC440EP
rainier PPC440GRx
sequoia PPC440EPx
sycamore PPC405GPr
ppc4xx: Add T3COPR board support (PPC460GT based) This patch adds support for the T3CORP board, based on the AppliedMicro (APM) PPC460GT. Signed-off-by: Stefan Roese <sr@denx.de>
2010-05-19 09:11:15 +00:00
t3corp PPC460GT
Add last known maintainer for orphaned boards; reformat. Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-07-13 12:58:16 +00:00
taishan PPC440GX
walnut PPC405GP
yellowstone PPC440GR
yosemite PPC440EP
zeus PPC405EP
P3M750 PPC750FX/GX/GL
[PATCH] Add support for Prodrive P3M750 & P3M7448 (P3Mx) boards This patch adds support for the Prodrive P3M750 (PPC750 & MV64460) and the P3M7448 (MPC7448 & MV64460) PMC modules. Both modules are quite similar and share the same board directory "prodrive/p3mx" and the same config file "p3mx.h". Signed-off-by: Stefan Roese <sr@denx.de>
2006-11-29 14:42:37 +00:00
Cleanup build problems (on Fedora Core x86_64 build host)
2005-08-03 20:32:02 +00:00
Yusdi Santoso <yusdi_santoso@adaptec.com>
HIDDEN_DRAGON MPC8241/MPC8245
* Patch by Phillippe Robin, 16 Mar 2004: avoid dereferencing NULL pointer in lib_arm/armlinux.c * Patch by Stephen Williams, 15 Mar 2004: Fix CONFIG_SERIAL_SOFTWARE_FIFO documentation * Patch by Tolunay Orkun, 15 Mar 2004: Initialize bi_opbfreq to real OPB frequency via get_OPB_freq() * Patch by Travis Sawyer, 15 Mar 2004: Update CREDITS & MAINTAINERS files for PPC440GX & Ocotea port
2004-03-23 21:43:07 +00:00
Travis Sawyer (travis.sawyer@sandburst.com>
Add last known maintainer for orphaned boards; reformat. Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-07-13 12:58:16 +00:00
KAREF PPC440GX
METROBOX PPC440GX
Initial revision
2002-11-02 22:58:18 +00:00
ppc4xx: New board avnet fx12 minimodul This patch adds support for the avnet fx12 minimodul. It needs the "ppc4xx: Generic architecture for xilinx ppc405" patch from Ricardo. Signed-off-by: Georg Schardt <schardt@team-ctech.de> Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es> Signed-off-by: Stefan Roese <sr@denx.de>
2008-10-24 11:51:52 +00:00
Georg Schardt <schardt@team-ctech.de>
fx12mm PPC405
Update CHANGELOG and MAINTAINERS files. Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-01-11 23:39:37 +00:00
Heiko Schocher <hs@denx.de>
arm, davinci: add cam_enc_4xx support - DM368 SOC - booting with spl not with UBL from TI - before loading u-boot from NAND into RAM, test the RAM with the post memory test. If error is found, switch all LEDs on and halt system. - SPI Flash Dataflash Typ: M25PE80 - Ethernet DM9161BI - MMC - USB Signed-off-by: Heiko Schocher <hs@denx.de> Cc: Sandeep Paulraj <s-paulraj@ti.com> Cc: Albert ARIBAUD <albert.u.boot@aribaud.net> Cc: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
2011-11-01 20:00:35 +00:00
cam_enc_4xx davinci/ARM926EJS
mpc52xx: add support for tqm52xx based board charon - serial console in PSC1 - 128MiB DRAM - 32MiB Flash - FEC Ethernet - 2 I2C busses - FPGA on CS3 - IDE - VGA SMI501 Signed-off-by: Heiko Schocher <hs@denx.de> Signed-off-by: Wolfgang Denk <wd@denx.de>
2010-12-04 07:34:04 +00:00
charon MPC5200
Add last known maintainer for orphaned boards; reformat. Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-07-13 12:58:16 +00:00
ids8247 MPC8247
jupiter MPC5200
powerpc: 83xx: add support for the kmeter1 board This patch adds support for the kmeter1 board from Keymile, based on a Freescale MPC8360 CPU. - serial console on UART 1 - 256 MB DDR2 RAM - 64 MB NOR Flash - Ethernet RMII Mode over UCC4 - PHY SMSC LAN8700 Signed-off-by: Heiko Schocher <hs@denx.de> Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2008-11-20 08:57:47 +00:00
kmeter1 MPC8360
powerpc, 83xx: add kmsupx5 board support The Keymile SUPx5 board series is based on a PBEC8321 but contains an additional PBUS FPGA (LPXF) on local bus CS2. Signed-off-by: Thomas Reufer <thomas.reufer@keymile.com> Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Kim Phillips <kim.phillips@freescale.com> cc: Wolfgang Denk <wd@denx.de> cc: Kim Phillips <kim.phillips@freescale.com> cc: Valentin Longchamp <valentin.longchamp@keymile.com> cc: Holger Brunck <holger.brunck@keymile.com>
2011-02-22 08:08:28 +00:00
kmsupx5 MPC8321
Add last known maintainer for orphaned boards; reformat. Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-07-13 12:58:16 +00:00
mgcoge MPC8247
powerpc/km82xx: add mgcoge3ne and remove mgcoge2ne support This patch adds support for the MPC8247 based board mgcoge3ne. Additionaly mgcoge2ne board supprot was removed, because due to the mgcoge3ne, this board is obsolete and not longer maintained. The board is similar to mgcoge. The difference is that a NUMONYX flash is used and a different SDRAM (256MB). Also introduce CONFIG_KM_82XX to collect ppc82xx common settings and remove staticness from the common set_pin function. Signed-off-by: Holger Brunck <holger.brunck@keymile.com> Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com> Acked-by: Heiko Schocher <hs@denx.de> cc: Wolfgang Denk <wd@denx.de> cc: Detlev Zundel <dzu@denx.de>
2011-05-02 22:56:55 +00:00
mgcoge3ne MPC8247
mpc52xx: added support for the MPC5200 based MUC.MC52 board from MAN. Signed-off-by: Heiko Schocher <hs@denx.de>
2008-08-21 18:44:49 +00:00
mucmc52 MPC5200
Add support for muas3001 board (MPC8270) Signed-off-by: Heiko Schocher <hs@denx.de>
2008-08-19 08:08:49 +00:00
muas3001 MPC8270
Add last known maintainer for orphaned boards; reformat. Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-07-13 12:58:16 +00:00
municse MPC5200
sc3 PPC405GP
mpc832x: add support for the mpc8321 based suvd3 board - serial console on UART1 - Ethernet RMII over UCC4 - PHY SMSC LAN8700 - 64MB Flash - 128 MB DDR2 RAM - I2C - bootcount This board is similiar to the kmeter1 (8360) board, so common config options are extracted into the include/configs/km83xx-common.h file. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Kim Phillips <kim.phillips@freescale.com> cc: Kim Phillips <kim.phillips@freescale.com> cc: Holger Brunck <holger.brunck@keymile.com> cc: Valentin Longchamp <valentin.longchamp@keymile.com>
2010-02-18 07:08:25 +00:00
suvd3 MPC8321
Add last known maintainer for orphaned boards; reformat. Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-07-13 12:58:16 +00:00
uc101 MPC5200
83xx: add support for ve8313 board This patch add support for the ve8313 board based on Freescale MPC8313 CPU. - serial console on UART 1 - 128 MB DDR RAM - 32 MB NOR Flash - 16 MB NAND Flash - Ethernet MII Mode over on TSEC0 - micrel ksz804 phy - Hardware WDT MAX824 changes since v1 - Environment size = sector size - use red. environment - add comments from Kim Phillips - add MAKEALL, MAINTAINERS entry - Codingstyle issues fixed - inserted original Copyrights - PCI subsys vendor ID changed from 0x1057 (Motorola) to 0x1957 (Freescale) changes since v2 - add comments from Wolfgang Denk - fix Codingstyle and some comments - reworked WDT reset (just toggling the WD_TRIG pin) - Environment size now 16KiB - fixed RAMBOOT version - fixed CONFIG_SYS_LOAD_ADDR - renamed CONFIG_TSEC1_NAME to TSEC1 Signed-off-by: Heiko Schocher <hs@denx.de> Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2010-07-07 10:26:34 +00:00
ve8313 MPC8313
Add MAINTAINERS entries for ids8247, jupiter, municse, sc3 and uc101 boards. Signed-off-by: Heiko Schocher <hs@denx.de> Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-01-12 14:51:34 +00:00
powerpc/83xx/km: merge tuxa and tuda1 boards to tuxx1 These boards are from a u-boot point of view identical. So collect the two headerfiles to one, to decrease maintenance. Signed-off-by: Holger Brunck <holger.brunck@keymile.com> cc: Valentin Longchamp <valentin.longchamp@keymile.com> cc: Heiko Schocher <hs@denx.de> Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2011-12-14 15:21:44 +00:00
Holger Brunck <holger.brunck@keymile.com>
powerpc/83xx/km: add support for 8321 based tuge1 board This board is similar to our tuxx1 target. But on this board there is only one application specific chip select configured. Signed-off-by: Holger Brunck <holger.brunck@keymile.com> cc: Valentin Longchamp <valentin.longchamp@keymile.com> Acked-by: Heiko Schocher <hs@denx.de> Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2011-12-14 15:21:45 +00:00
tuge1 MPC8321
powerpc/83xx/km: merge tuxa and tuda1 boards to tuxx1 These boards are from a u-boot point of view identical. So collect the two headerfiles to one, to decrease maintenance. Signed-off-by: Holger Brunck <holger.brunck@keymile.com> cc: Valentin Longchamp <valentin.longchamp@keymile.com> cc: Heiko Schocher <hs@denx.de> Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2011-12-14 15:21:44 +00:00
tuxx1 MPC8321
Initial revision
2002-11-02 22:58:18 +00:00
Peter De Schrijver <p2@mind.be>
Add last known maintainer for orphaned boards; reformat. Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-07-13 12:58:16 +00:00
ML2 PPC4xx
Initial revision
2002-11-02 22:58:18 +00:00
add MPC8343 based board mvBlueLYNX-M7 (doc+config) Add MPC8343 based board mvBlueLYNX-M7. It's a single board stereo camera system. Please read doc/README.mvblm7 for details. Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de> Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2008-06-10 07:13:16 +00:00
Andre Schwarz <andre.schwarz@matrix-vision.de>
mpc83xx: Add support for MergerBox board Includes board config file, documentation, maintainer and boards.cfg entries, and board specific files in vendor dir. Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de> Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2011-04-14 13:11:44 +00:00
mergerbox MPC8377
mpc5xxx: Add MVBC_P board support The MVBC_P is a MPC5200B based camera system with Intel Gigabit ethernet controller (using e1000) and custom Altera Cyclone-II FPGA on PCI. Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2008-07-09 16:30:44 +00:00
mvbc_p MPC5200
Add last known maintainer for orphaned boards; reformat. Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-07-13 12:58:16 +00:00
mvblm7 MPC8343
Add initial support for Matrix Vision mvSMR board based on MPC5200B. Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
2010-04-01 19:26:55 +00:00
mvsmr MPC5200
add MPC8343 based board mvBlueLYNX-M7 (doc+config) Add MPC8343 based board mvBlueLYNX-M7. It's a single board stereo camera system. Please read doc/README.mvblm7 for details. Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de> Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2008-06-10 07:13:16 +00:00
board support patch for phyCORE-MPC5200B-tiny Add support for the Phytec phyCORE-MPC5200B-tiny. Code originally from Pengutronix.de. Created CONFIG_SYS_ATA_CS_ON_TIMER01 define for when IDE CS is on Timer 0/1 Signed-off-by: Jon Smirl <jonsmirl@gmail.com> Acked-by: Grant Likely <grant.likely@secretlab.ca>
2009-06-14 22:21:28 +00:00
Jon Smirl <jonsmirl@gmail.com>
pcm030 MPC5200
mpc85xx: support for Freescale COM Express P2020 This adds support for the Freescale COM Express P2020 board. This board is similar to the P1_P2_RDB, but has some extra (as well as missing) peripherals. Unlike all other mpc85xx boards, it uses a watchdog timeout to reset. Using the HRESET_REQ register does not work. This board has no NOR flash, and can only be booted via SD or SPI. This procedure is documented in Freescale Document Number AN3659 "Booting from On-Chip ROM (eSDHC or eSPI)." Some alternative documentation is provided in Freescale Document Number P2020RM "P2020 QorIQ Integrated Processor Reference Manual" (section 4.5). Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-11-23 16:25:58 +00:00
Ira W. Snyder <iws@ovro.caltech.edu>
P2020COME P2020
mpc83xx: add MAINTAINER and MAKEALL entries for the mpc8323erdb and reorder the existing 83xx maintainers alpha. Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2007-08-16 03:30:05 +00:00
Timur Tabi <timur@freescale.com>
Add last known maintainer for orphaned boards; reformat. Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-07-13 12:58:16 +00:00
MPC8349E-mITX MPC8349
MPC8349E-mITX-GP MPC8349
powerpc: add support for the Freescale P1022DS reference board Specifics: 1) 36-bit only 2) Booting from NOR flash only 3) Environment stored in NOR flash only 4) No SPI support 5) No DIU support Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-06-14 20:28:24 +00:00
P1022DS P1022
mpc83xx: add MAINTAINER and MAKEALL entries for the mpc8323erdb and reorder the existing 83xx maintainers alpha. Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2007-08-16 03:30:05 +00:00
Initial revision
2002-11-02 22:58:18 +00:00
Erik Theisen <etheisen@mindspring.com>
Add last known maintainer for orphaned boards; reformat. Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-07-13 12:58:16 +00:00
W7OLMC PPC4xx
W7OLMG PPC4xx
Initial revision
2002-11-02 22:58:18 +00:00
Jim Thompson <jim@musenki.com>
Add last known maintainer for orphaned boards; reformat. Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-07-13 12:58:16 +00:00
MUSENKI MPC8245/8241
Sandpoint8245 MPC8245
Initial revision
2002-11-02 22:58:18 +00:00
* Patch by Rune Torgersen, 13 Feb 2003: Add support for Motorola MPC8266ADS board * Patch by Kyle Harris, 19 Feb 2003: patches for the Intel lubbock board: memsetup.S - general cleanup (based on Robert's csb226 code) flash.c - overhaul, actually works now lubbock.c - fix init funcs to return proper value * Patch by Kenneth Johansson, 26 Feb 2003: - Fixed off by one in RFTA calculation. - No need to abort when LDF is lower than we can program it's only minimum timing so clamp it to what we can do. - Takes function pointer to function for reading the spd_nvram. Usefull for faking data or hardcode a module without the nvram. - fix other user for above change - fix some comments. * Patches by Brian Waite, 26 Feb 2003: - fix port for evb64260 board - fix PCI for evb64260 board - fix PCI scan * Patch by Reinhard Meyer, 1 Mar 2003: Add support for EMK TOP860 Module * Patch by Yuli Barcohen, 02 Mar 2003: Add SPD EEPROM support for MPC8260ADS board
2003-03-06 00:58:30 +00:00
Rune Torgersen <runet@innovsys.com>
Add last known maintainer for orphaned boards; reformat. Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-07-13 12:58:16 +00:00
MPC8266ADS MPC8266
* Patch by Rune Torgersen, 13 Feb 2003: Add support for Motorola MPC8266ADS board * Patch by Kyle Harris, 19 Feb 2003: patches for the Intel lubbock board: memsetup.S - general cleanup (based on Robert's csb226 code) flash.c - overhaul, actually works now lubbock.c - fix init funcs to return proper value * Patch by Kenneth Johansson, 26 Feb 2003: - Fixed off by one in RFTA calculation. - No need to abort when LDF is lower than we can program it's only minimum timing so clamp it to what we can do. - Takes function pointer to function for reading the spd_nvram. Usefull for faking data or hardcode a module without the nvram. - fix other user for above change - fix some comments. * Patches by Brian Waite, 26 Feb 2003: - fix port for evb64260 board - fix PCI for evb64260 board - fix PCI scan * Patch by Reinhard Meyer, 1 Mar 2003: Add support for EMK TOP860 Module * Patch by Yuli Barcohen, 02 Mar 2003: Add SPD EEPROM support for MPC8260ADS board
2003-03-06 00:58:30 +00:00
XPedite5370 board support Initial support for Extreme Engineering Solutions XPedite5370 - a MPC8572-based 3U VPX single board computer with a PMC/XMC site. Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
2008-12-17 22:36:23 +00:00
Peter Tyser <ptyser@xes-inc.com>
xes: Make X-ES board names more generic Some U-Boot images for X-ES boards support multiple products in the same family. For example, the XPedite5370, XPedite5371, and XPedite5372 are similar enough that one U-Boot image can work on all 3 cards. To make it clear that a U-Boot image can work on boards of the same family, rename the boards with the least significant digit of 'x'. While we're at it, change the board config file and make targets to be lowercase. Also change the default uImage and fdt filenames to "board.uImage" and "board.dtb" to be more generic. Signed-off-by: Peter Tyser <ptyser@xes-inc.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-10-22 05:20:26 +00:00
xpedite1000 PPC440GX
xpedite5170 MPC8640
xpedite5200 MPC8548
xpedite5370 MPC8572
XPedite5500 board support Initial support for Extreme Engineering Solutions XPedite5500 - a P2020-based PMC/XMC single board computer. Signed-off-by: John Schmoller <jschmoller@xes-inc.com> Signed-off-by: Peter Tyser <ptyser@xes-inc.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-10-22 05:20:34 +00:00
xpedite5500 P2020
Added David Updegraff as maintainer of CRAYL1
2006-09-01 15:33:44 +00:00
David Updegraff <dave@cray.com>
Add last known maintainer for orphaned boards; reformat. Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-07-13 12:58:16 +00:00
CRAYL1 PPC4xx
Added David Updegraff as maintainer of CRAYL1
2006-09-01 15:33:44 +00:00
mpc83xx: add support for the MPC8360E-RDK This is MPC8360E based board with: - 256MB fixed SDRAM; - 8MB Intel Strata NOR flash; - StMICRO 64MiB NAND flash; - two 10/100/1000 ethernet ports connected via Broadcom BCM5481 PHYs; - two 10/100 ethernet ports connected via National DP83848 PHYs; - one PCI and one miniPCI slots; - four serial ports (two NS16550-compatible, two UCCs); - four USB ports working through MPC8360E "FHCI" USB controller; - Fujitsu MB86277 graphics controller; - Analog to Digital Converter/Touchscreen controller, AD7843 connected to SPI. Features not supported in this patch are: - StMICRO 64MiB NAND flash (patch sent); - MINT framebuffer initialization (patch is pending); - Fetching production information from the EEPROM via I2C; - FHCI USB; - Two slow UCCs used as RS-485 UARTs. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2008-01-09 17:57:47 +00:00
Anton Vorontsov <avorontsov@ru.mvista.com>
Add last known maintainer for orphaned boards; reformat. Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-07-13 12:58:16 +00:00
MPC8360ERDK MPC8360
mpc83xx: add support for the MPC8360E-RDK This is MPC8360E based board with: - 256MB fixed SDRAM; - 8MB Intel Strata NOR flash; - StMICRO 64MiB NAND flash; - two 10/100/1000 ethernet ports connected via Broadcom BCM5481 PHYs; - two 10/100 ethernet ports connected via National DP83848 PHYs; - one PCI and one miniPCI slots; - four serial ports (two NS16550-compatible, two UCCs); - four USB ports working through MPC8360E "FHCI" USB controller; - Fujitsu MB86277 graphics controller; - Analog to Digital Converter/Touchscreen controller, AD7843 connected to SPI. Features not supported in this patch are: - StMICRO 64MiB NAND flash (patch sent); - MINT framebuffer initialization (patch is pending); - Fetching production information from the EEPROM via I2C; - FHCI USB; - Two slow UCCs used as RS-485 UARTs. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2008-01-09 17:57:47 +00:00
Add MicroSys maintainer.
2004-06-24 15:54:37 +00:00
Josef Wagner <Wagner@Microsys.de>
Add last known maintainer for orphaned boards; reformat. Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-07-13 12:58:16 +00:00
CPC45 MPC8245
PM520 MPC5200
Add MicroSys maintainer.
2004-06-24 15:54:37 +00:00
mpc5121: add support for PDM360NG board PDM360NG is a MPC5121E based board by ifm ecomatic gmbh. Signed-off-by: Michael Weiss <michael.weiss@ifm.com> Signed-off-by: Detlev Zundel <dzu@denx.de> Signed-off-by: Anatolij Gustschin <agust@denx.de>
2010-04-24 17:27:09 +00:00
Michael Weiss <michael.weiss@ifm.com>
PDM360NG MPC5121e
* Patch by John Kerl, 16 Apr 2004: Enable ranges in mii command, e.g. mii read 0-1f 0 or mii read 4-7 18-1a. Also add mii dump subcommand for pretty-printing standard regs 0-5. * Patch by Stephen Williams, 16 April 2004: fix typo in JSE.h; update MAINTAINERS
2004-04-18 22:57:51 +00:00
Stephen Williams <steve@icarus.com>
Add last known maintainer for orphaned boards; reformat. Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-07-13 12:58:16 +00:00
JSE PPC405GPr
* Patch by John Kerl, 16 Apr 2004: Enable ranges in mii command, e.g. mii read 0-1f 0 or mii read 4-7 18-1a. Also add mii dump subcommand for pretty-printing standard regs 0-5. * Patch by Stephen Williams, 16 April 2004: fix typo in JSE.h; update MAINTAINERS
2004-04-18 22:57:51 +00:00
MPC8308RDB: minimal support for devboard from Freescale This patch provides support for MPC8308RDB development board from Freescale with a minimal set of features: Dual UART is supported NOR flash is supported Both TSEC Ethernet controllers are supported PCI Express initialization is supported The following features are enabled in configuration but not fully tested: I2C (used to get the board revision) I2C-connected RTC VSC7385 switch There is one (hopefully) minor issue: on soft reset the board sometimes resets twice. I've not managed to find the fix for this problem yet. As a workaround instruction cache can be disabled. Signed-off-by: Ilya Yanok <yanok@emcraft.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2010-07-07 16:16:13 +00:00
Ilya Yanok <yanok@emcraft.com>
mpc8308_p1m: support for MPC8308 P1M board This patch provides support for MPC8308 P1M board with the following set of features: Dual UART is supported NOR flash is supported Both TSEC Ethernet controllers are supported PCI Express initialization is supported Both I2C controllers are supported Signed-off-by: Ilya Yanok <yanok@emcraft.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2010-09-17 21:41:50 +00:00
mpc8308_p1m MPC8308
MPC8308RDB: minimal support for devboard from Freescale This patch provides support for MPC8308RDB development board from Freescale with a minimal set of features: Dual UART is supported NOR flash is supported Both TSEC Ethernet controllers are supported PCI Express initialization is supported The following features are enabled in configuration but not fully tested: I2C (used to get the board revision) I2C-connected RTC VSC7385 switch There is one (hopefully) minor issue: on soft reset the board sometimes resets twice. I've not managed to find the fix for this problem yet. As a workaround instruction cache can be disabled. Signed-off-by: Ilya Yanok <yanok@emcraft.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2010-07-07 16:16:13 +00:00
MPC8308RDB MPC8308
Add mpc7448hpc2 maintainer information Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
2008-08-07 10:19:28 +00:00
Roy Zang <tie-fei.zang@freescale.com>
* Patch by Rick Bronson, 16 Mar 2003: Add support for Atmel AT91RM9200DK w/NAND * Patches by Robert Schwebel, 19 Mar 2003: - use arm-linux-gcc as default compiler for ARM - fix i2c fixup code - fix missing baudrate setting - added $loadaddr / CFG_LOAD_ADDR support to loadb - moved "ignoring trailing characters" _before_ u-boot wants to print out diagnostics messages; removes bogus characters at the end of transmission * Patch by John Zhan, 18 Mar 2003: Add support for SinoVee Microsystems SC8xx boards * Patch by Rolf Offermanns, 21 Mar 2003: ported the dnp1110 related changes from the current armboot cvs to current u-boot cvs. smc91111 does not work. problem marked in smc91111.c, grep for "FIXME". * Patch by Brian Auld, 25 Mar 2003: Add support for STM flash chips on ebony board * Add PCI support for MPC8250 Boards (PM825 module) * Patch by Stefan Roese, 25 Mar 2003:
2003-03-26 06:55:25 +00:00
Add mpc7448hpc2 maintainer information Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
2008-08-07 10:19:28 +00:00
mpc7448hpc2 MPC7448
powerpc/85xx: Add basic support for P1023RDS board The P1023RDS board is the reference board for the P1023 SoC. Add support for booting it from NOR or NAND, with fixed 2G of DDR, PCIe, UART, I2C, etc. Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com> Signed-off-by: Chunhe Lan <Chunhe.Lan@freescale.com> Signed-off-by: Lei Xu <B33228@freescale.com> Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-06-09 03:30:52 +00:00
P1023RDS P1023
* Patch by Rick Bronson, 16 Mar 2003: Add support for Atmel AT91RM9200DK w/NAND * Patches by Robert Schwebel, 19 Mar 2003: - use arm-linux-gcc as default compiler for ARM - fix i2c fixup code - fix missing baudrate setting - added $loadaddr / CFG_LOAD_ADDR support to loadb - moved "ignoring trailing characters" _before_ u-boot wants to print out diagnostics messages; removes bogus characters at the end of transmission * Patch by John Zhan, 18 Mar 2003: Add support for SinoVee Microsystems SC8xx boards * Patch by Rolf Offermanns, 21 Mar 2003: ported the dnp1110 related changes from the current armboot cvs to current u-boot cvs. smc91111 does not work. problem marked in smc91111.c, grep for "FIXME". * Patch by Brian Auld, 25 Mar 2003: Add support for STM flash chips on ebony board * Add PCI support for MPC8250 Boards (PM825 module) * Patch by Stefan Roese, 25 Mar 2003:
2003-03-26 06:55:25 +00:00
MAINTAINERS: sort entries Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-08-10 22:17:52 +00:00
John Zhan <zhanz@sinovee.com>
LinkStation: fix compiler warning, add a maintainer out_8 wants a pointer to an unsigned as the first argument. Add a maintainer for Linkstation boards. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
2008-04-28 12:35:57 +00:00
MAINTAINERS: sort entries Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-08-10 22:17:52 +00:00
svm_sc8xx MPC8xx
LinkStation: fix compiler warning, add a maintainer out_8 wants a pointer to an unsigned as the first argument. Add a maintainer for Linkstation boards. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
2008-04-28 12:35:57 +00:00
MAINTAINERS: Add entry for 'inka4x0' board. Signed-off-by: Detlev Zundel <dzu@denx.de>
2009-03-27 14:03:55 +00:00
Detlev Zundel <dzu@denx.de>
inka4x0 MPC5200
Initial revision
2002-11-02 22:58:18 +00:00
-------------------------------------------------------------------------
Unknown / orphaned boards:
Add last known maintainer for orphaned boards; reformat. Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-07-13 12:58:16 +00:00
ADS860 MPC8xx
FADS823 MPC8xx
FADS850SAR MPC8xx
FADS860T MPC8xx
GENIETV MPC8xx
IAD210 MPC8xx
MBX MPC8xx
MBX860T MPC8xx
NX823 MPC8xx
RPXClassic MPC8xx
RPXlite MPC8xx
Initial revision
2002-11-02 22:58:18 +00:00
Add last known maintainer for orphaned boards; reformat. Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-07-13 12:58:16 +00:00
MOUSSE MPC824x
Initial revision
2002-11-02 22:58:18 +00:00
Add last known maintainer for orphaned boards; reformat. Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-07-13 12:58:16 +00:00
RPXsuper MPC8260
rsdproto MPC8260
Initial revision
2002-11-02 22:58:18 +00:00
Add last known maintainer for orphaned boards; reformat. Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-07-13 12:58:16 +00:00
EVB64260 MPC7xx_74xx
Orphan EVB64260_750CX board The last maintainer (Eran Man) cannot be reached any more. Signed-off-by: Wolfgang Denk <wd@denx.de>
2011-11-16 20:58:21 +00:00
EVB64260_750CX MPC750CX [Eran Man <eran@nbase.co.il>]
Initial revision
2002-11-02 22:58:18 +00:00
MAINTAINERS: integrator+versatile boards - Take maintainership of the unlisted integratorap board - Orphan the boards maintained by Peter Pearse, as he has retired from ARM Cc: Philippe Robin <philippe.robin@arm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-07-15 02:15:41 +00:00
versatile ARM926EJ-S
Initial revision
2002-11-02 22:58:18 +00:00
#########################################################################
# ARM Systems: #
# #
# Maintainer Name, Email Address #
Add last known maintainer for orphaned boards; reformat. Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-07-13 12:58:16 +00:00
# Board CPU #
Initial revision
2002-11-02 22:58:18 +00:00
#########################################################################
Replace obsolete e-mail address Signed-off-by: Albert ARIBAUD <albert.u.boot@aribaud.net>
2011-04-22 17:41:02 +00:00
Albert ARIBAUD <albert.u.boot@aribaud.net>
Add support for the LaCie ED Mini V2 board This patch adds support for the LaCie ED Mini V2 product which is based on the Marvell Orion5x SoC. Signed-off-by: Albert Aribaud <albert.aribaud@free.fr>
2010-06-17 14:08:21 +00:00
edminiv2 ARM926EJS (Orion5x SoC)
xscale: add support for the polaris board The Polaris board is based on the TrizepsIV module of Keith & Koep (http://www.keith-koep.com). Signed-off-by: Stefano Babic <sbabic@denx.de>
2009-07-01 18:40:41 +00:00
Stefano Babic <sbabic@denx.de>
Davinci: add support for the ea20 board This board uses the OMAP-L138 SOM stacked on a custom baseboard. It supports SPI Flash, Ethernet with RMII. Signed-off-by: Stefano Babic <sbabic@denx.de> Signed-off-by: Ben Gardiner <bengardiner@nanometrics.ca> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
2010-11-30 16:46:56 +00:00
ea20 davinci
MX35: add support for flea3 board The flea3 board is a custom board by CarMediaLab used in automotive. Network (FEC), NOR, NAND and SPI are supported. Signed-off-by: Stefano Babic <sbabic@denx.de>
2011-10-23 23:58:20 +00:00
flea3 i.MX35
Add support for Freescale's mx35pdk board. The patch adds suupport for the Freescale's mx35pdk board (known as well as mx35_3stack). The board boots from the NOR flash. Following devices are supported: - two ethernet devices (FEC and SMC911x on debug board) - I2C - PMIC (MC13892) via I2C interface - UART - NOR flash (64MB) - NAND flash (2GB) - basic access to mc9sdz60 registers via I2C interface Signed-off-by: Stefano Babic <sbabic@denx.de>
2011-01-20 08:05:15 +00:00
mx35pdk i.MX35
mx51evk i.MX51
add XScale sub architecture (IXP/PXA) to maintainer list Signed-off-by: Michael Schwingen <michael@schwingen.org>
2011-05-22 21:59:57 +00:00
polaris xscale/pxa
trizepsiv xscale/pxa
ARM: omap3: add support to Technexion twister board The twister board is a development board using the TAM3517 SOM. Support for NAND, 2 Ethernet (EMAC and SMC911), USB (EHCI_OMAP). Signed-off-by: Stefano Babic <sbabic@denx.de> CC: Tapani Utrianen <tapani@technexion.com> CC: Tom Rini <tom.rini@gmail.com> CC: Sandeep Paulraj <s-paulraj@ti.com>
2011-11-30 23:56:53 +00:00
twister omap3
MX51: Support for TTECH vision2 board The patch adds support for TTECH vision2 board. The board has 512MB RAM, SDHC slot and 4MB SPI device from StMicron. Signed-off-by: Stefano Babic <sbabic@denx.de>
2010-07-06 17:32:09 +00:00
vision2 i.MX51
xscale: add support for the polaris board The Polaris board is based on the TrizepsIV module of Keith & Koep (http://www.keith-koep.com). Signed-off-by: Stefano Babic <sbabic@denx.de>
2009-07-01 18:40:41 +00:00
MX5:MX53: add initial support for MX53EVK board Add initial support for MX53EVK board support. FEC, SD/MMC, UART, I2C, have been supported. Signed-off-by: Jason Liu <r64343@freescale.com>
2011-01-03 22:27:42 +00:00
Jason Liu <r64343@freescale.com>
mx53evk i.MX53
MX53: support for freescale MX53LOCO board This patch add initial support for freescale MX53LOCO board. Network(FEC),SD/MMC,UART have been supported by this patch Signed-off-by: Jason Liu <jason.hui@linaro.org>
2011-05-13 01:58:55 +00:00
mx53loco i.MX53
i.mx: i.mx6q: add the initial support for i.mx6q ARM2 board Add the initial support for Freescale i.MX6Q Armadillo2 board Support: MMC boot from slot 0/1, debug UART(UART4), usdhc. There is two MMC slots on the boards: mmc dev 0 -> connect USDHC3 -> the lower slot on the board, mmc dev 1 -> connect USDHC4 -> the upper slot on the board, Signed-off-by: Jason Liu <jason.hui@linaro.org> Cc: Stefano Babic <sbabic@denx.de> Tested-by: Dirk Behme <dirk.behme@de.bosch.com>
2011-11-25 00:18:05 +00:00
mx6qarm2 i.MX6Q
i.mx: i.mx6q: add the initial support for i.mx6q Sabre Lite board Add the initial support for Freescale i.MX6Q Sabre Lite board Signed-off-by: Dirk Behme <dirk.behme@de.bosch.com> Signed-off-by: Jason Liu <jason.hui@linaro.org> CC: Eric Nelson <eric.nelson@boundarydevices.com>
2011-12-29 06:34:19 +00:00
mx6qsabrelite i.MX6Q
MX5:MX53: add initial support for MX53EVK board Add initial support for MX53EVK board support. FEC, SD/MMC, UART, I2C, have been supported. Signed-off-by: Jason Liu <r64343@freescale.com>
2011-01-03 22:27:42 +00:00
MAINTAINERS: Fix alphabetical order in ARM subsection I'm noticed that IGEP maintainer isn't in the correct place within the ARM subsection: it's supposed to be in alphabetical order by maintainer. This patch fix this. Signed-off-by: Enric Balletbo i Serra <eballetbo@iseebcn.com>
2010-10-18 17:38:34 +00:00
Enric Balletbo i Serra <eballetbo@iseebcn.com>
igep0020 ARM ARMV7 (OMAP3xx SoC)
igep0030 ARM ARMV7 (OMAP3xx SoC)
OMAP3: Add common power code, README, and BeagleBoard Add BeagleBoard support, common power code and README. Signed-off-by: Jason Kridner <jkridner@beagleboard.org> Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
2009-01-27 17:19:12 +00:00
Dirk Behme <dirk.behme@gmail.com>
ARM: Rename arch/arm/cpu/arm_cortexa8 to armv7 The purpose of this patch is to prepare for adding the OMAP4 architecture, which is Cortex A9 Cortex A8 and A9 both belong to the armv7 architecture, hence the name change. The two architectures are similar enough that substantial code can be shared. Signed-off-by: Aneesh V <aneesh@ti.com> Signed-off-by: Steve Sakoman <steve@sakoman.com> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
2010-06-18 04:50:01 +00:00
omap3_beagle ARM ARMV7 (OMAP3530 SoC)
OMAP3: Add common power code, README, and BeagleBoard Add BeagleBoard support, common power code and README. Signed-off-by: Jason Kridner <jkridner@beagleboard.org> Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
2009-01-27 17:19:12 +00:00
Add support for Eukrea CPUAT91 SBC CPUAT91 is built around Atmel's AT91RM9200 and has up to 16MB of NOR flash, up to 128MB of SDRAM, and includes a Micrel KS8721 PHY in RMII mode. Signed-off-by: Eric Benard <eric@eukrea.com> Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
2009-09-27 12:47:24 +00:00
Eric Benard <eric@eukrea.com>
cpuat91 ARM920T
Add support for Eukrea CPU9260/CPU9G20 SBC these boards are built around Atmel's AT91SAM9260/9G20 and have up to 64MB of NOR flash, up to 128MB of SDRAM, up to 2GB of NAND and include a 10/100 Ethernet PHY in RMII mode. Signed-off-by: Eric Benard <eric@eukrea.com> Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
2009-09-27 16:10:09 +00:00
cpu9260 ARM926EJS (AT91SAM9260 SoC)
cpu9G20 ARM926EJS (AT91SAM9G20 SoC)
Add support for Eukrea CPUAT91 SBC CPUAT91 is built around Atmel's AT91RM9200 and has up to 16MB of NOR flash, up to 128MB of SDRAM, and includes a Micrel KS8721 PHY in RMII mode. Signed-off-by: Eric Benard <eric@eukrea.com> Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
2009-09-27 12:47:24 +00:00
Armada100: Add Board Support for Marvell GuruPlug-Display This patch adds basic board support with DRAM and UART functionality Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com> Signed-off-by: Ajay Bhargav <ajay.bhargav@einfochips.com> Acked-by: Tanmay Upadhyay <tanmay.upadhyay@einfochips.com>
2011-08-04 15:56:02 +00:00
Ajay Bhargav <ajay.bhargav@einfochips.com>
gplugd ARM926EJS (ARMADA100 88AP168 SoC)
Cleanup build problems (on Fedora Core x86_64 build host)
2005-08-03 20:32:02 +00:00
Rishi Bhattacharya <rishi@ti.com>
Add last known maintainer for orphaned boards; reformat. Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-07-13 12:58:16 +00:00
omap5912osk ARM926EJS
Cleanup build problems (on Fedora Core x86_64 build host)
2005-08-03 20:32:02 +00:00
Convert ISO-8859 files to UTF-8 There was a mix of UTF-8 and ISO-8859 files in the U-Boot source tree, which could cause issues with the patchwork review system. This commit converts all ISO-8859 files to UTF-8. Signed-off-by: Albert ARIBAUD <albert.u.boot@aribaud.net>
2011-08-04 16:45:45 +00:00
Andreas Bießmann <andreas.devel@gmail.com>
at91rm9200ek: convert to at91 This patch removes some functionality from at91rm9200ek board but the remaining functionality does now work with newer at91 code and arm-relocation. Currently missing features are: - dataflash booting (due to missing HW for testing) - MMC/SD-Card - first stage bootloader support is completely removed (not needed for NOR) Cause this board was (some days ago) reference for all at91rm9200 based boards this should be a good starting point to convert all remaining at91rm9200 borads to at91 code. Aside from that this is a good base to get some drivers between at91sam/at91rm/avr32 merged. Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com> Signed-off-by: Reinhard Meyer <u-boot@emk-elektronik.de>
2010-10-18 20:58:29 +00:00
at91rm9200ek at91rm9200
avr32: add grasshopper (ICnova AP7000) board The grasshopper board is a neat avr32 evaluation kit produced by In-Circuit GmbH. See http://www.ic-board.de/product_info.php?info=p75_ICnova-AP7000-Base.html for detailed information about this device. Signed-off-by: Andreas Bießmann <biessmann@corscience.de> Signed-off-by: Reinhard Meyer <u-boot@emk-elektronik.de>
2011-06-30 22:03:20 +00:00
grasshopper avr32
at91rm9200ek: convert to at91 This patch removes some functionality from at91rm9200ek board but the remaining functionality does now work with newer at91 code and arm-relocation. Currently missing features are: - dataflash booting (due to missing HW for testing) - MMC/SD-Card - first stage bootloader support is completely removed (not needed for NOR) Cause this board was (some days ago) reference for all at91rm9200 based boards this should be a good starting point to convert all remaining at91rm9200 borads to at91 code. Aside from that this is a good base to get some drivers between at91sam/at91rm/avr32 merged. Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com> Signed-off-by: Reinhard Meyer <u-boot@emk-elektronik.de>
2010-10-18 20:58:29 +00:00
Add Vibren (was Accelent) PXA255 IDP Support Patch by Cliff Brake, 04 Feb 2005
2005-09-25 13:57:49 +00:00
Cliff Brake <cliff.brake@gmail.com>
add XScale sub architecture (IXP/PXA) to maintainer list Signed-off-by: Michael Schwingen <michael@schwingen.org>
2011-05-22 21:59:57 +00:00
pxa255_idp xscale/pxa
Add Vibren (was Accelent) PXA255 IDP Support Patch by Cliff Brake, 04 Feb 2005
2005-09-25 13:57:49 +00:00
Move the AT91RM9200DK to the ARM Systems list. Patch by Anders Larsen, 26 Apr 2005
2005-08-12 20:38:37 +00:00
Rick Bronson <rick@efn.org>
Add last known maintainer for orphaned boards; reformat. Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-07-13 12:58:16 +00:00
AT91RM9200DK at91rm9200
Move the AT91RM9200DK to the ARM Systems list. Patch by Anders Larsen, 26 Apr 2005
2005-08-12 20:38:37 +00:00
ARMV7: OMAP3: Add support for Comelit DIG297 board Board support for the DIG297 board manufactured by Comelit Group SpA. It is a custom board based on the BeagleBoard <http://beagleboard.org/> by Texas Instruments. The board support is based on the BeagleBoard implementation. Signed-off-by: Luca Ceresoli <luca.ceresoli@comelit.it> Cc: Wolfgang Denk <wd@denx.de> Cc: Albert Aribaud <albert.aribaud@free.fr> Cc: Sandeep Paulraj <s-paulraj@ti.com> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
2011-04-20 15:02:08 +00:00
Luca Ceresoli <luca.ceresoli@comelit.it>
dig297 ARM ARMV7 (OMAP3530 SoC)
arm: A320: Add support for Faraday A320 evaluation board This patch adds support for A320 evaluation board from Faraday. This board uses FA526 processor by default and has 512kB and 32MB NOR flash, 64M RAM. FA526 is an ARMv4 processor and uses the ARM920T source in this patch. Signed-off-by: Po-Yu Chuang <ratbert@faraday-tech.com>
2009-11-11 09:27:30 +00:00
Po-Yu Chuang <ratbert@faraday-tech.com>
a320evb FA526 (ARM920T-like) (a320 SoC)
Seagate FreeAgent DockStar support start with sheevaplug configuration add modifications by Alexander Holler <holler@ahsoftware.de> change RAM definitions to one bank (128 MB) change ident string and prompt define MTD partitions and default environment variables add support for LEDs Signed-off-by: Eric Cooper <ecc@cmu.edu>
2010-11-24 11:41:32 +00:00
Eric Cooper <ecc@cmu.edu>
dockstar ARM926EJS (Kirkwood SoC)
MAINTAINERS: Keep list sorted. Signed-off-by: Detlev Zundel <dzu@denx.de>
2009-03-27 14:03:54 +00:00
Wolfgang Denk <wd@denx.de>
imx27lite: add support for imx27lite board from LogicPD This patch adds support for i.MX27-LITEKIT development board from LogicPD. This board uses i.MX27 SoC and has 2MB NOR flash, 64MB NAND flash, FEC ethernet controller integrated into i.MX27. Signed-off-by: Ilya Yanok <yanok@emcraft.com> Acked-by: Wolfgang Denk <wd@denx.de>
2009-08-10 22:32:09 +00:00
imx27lite i.MX27
MAINTAINERS: Keep list sorted. Signed-off-by: Detlev Zundel <dzu@denx.de>
2009-03-27 14:03:54 +00:00
qong i.MX31
Add support for HP Jornada flashrom boards This patch adds support for the HP Jornada flashboards that were made in 2008. Older flashroms should work if memory registers are adjusted. Signed-off-by: Kristoffer Ericson <kristoffer.ericson@gmail.com> Adpted for TEXT_BASE -> CONFIG_SYS_TEXT_BASE rename. Removed now redundant board/jornada/config.mk file. Removed unused empty jornada_init() function to silence "jornada.c:35: warning: 'jornada_init' defined but not used" Signed-off-by: Wolfgang Denk <wd@denx.de>
2010-10-15 21:31:43 +00:00
Kristoffer Ericson <kristoffer.ericson@gmail.com>
jornada SA1110
MAINTAINERS: fix email address case Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2011-02-21 18:02:07 +00:00
Fabio Estevam <fabio.estevam@freescale.com>
MX31: Add basic support for Freescale i.MX31 PDK board. Add support for Freescale's i.MX31 PDK board (a.k.a. 3 stack board). This patch assumes that some other program performs the actual NAND boot. Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com> Acked-by: Fabio Estevam <fabioestevam@yahoo.com> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2009-06-30 23:07:55 +00:00
MX25: Add initial support for MX25PDK Add the initial support for MX25PDK booting from SD card via internal boot. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2011-09-06 09:05:43 +00:00
mx25pdk i.MX25
mx28evk: Add initial support for MX28EVK board Add initial support for Freescale MX28EVK board. Tested boot via SD card and by loading a kernel via TFTP through the FEC interface. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Marek Vasut <marek.vasut@gmail.com> Acked-by: Stefano Babic <sbabic@denx.de>
2011-12-20 05:46:34 +00:00
mx28evk i.MX28
MX31: Add basic support for Freescale i.MX31 PDK board. Add support for Freescale's i.MX31 PDK board (a.k.a. 3 stack board). This patch assumes that some other program performs the actual NAND boot. Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com> Acked-by: Fabio Estevam <fabioestevam@yahoo.com> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2009-06-30 23:07:55 +00:00
mx31pdk i.MX31
MX53: Add initial support for MX53ARD Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2011-06-07 07:02:53 +00:00
mx53ard i.MX53
MX53: Add initial support for MX53SMD board. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2011-05-13 03:15:11 +00:00
mx53smd i.MX53
MX31: Add basic support for Freescale i.MX31 PDK board. Add support for Freescale's i.MX31 PDK board (a.k.a. 3 stack board). This patch assumes that some other program performs the actual NAND boot. Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com> Acked-by: Fabio Estevam <fabioestevam@yahoo.com> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2009-06-30 23:07:55 +00:00
at91: Add esd gmbh MEESC board support This patch adds support for esd gmbh MEESC board. The MEESC is based on an Atmel AT91SAM9263 SoC. Signed-off-by: Daniel Gorsulowski <Daniel.Gorsulowski@esd.eu>
2009-06-30 19:03:37 +00:00
Daniel Gorsulowski <daniel.gorsulowski@esd.eu>
meesc ARM926EJS (AT91SAM9263 SoC)
at91: Add esd gmbh OTC570 board support This patch adds support for esd gmbh OTC570 board. The OTC570 is based on an Atmel AT91SAM9263 SoC. Signed-off-by: Daniel Gorsulowski <Daniel.Gorsulowski@esd.eu>
2010-01-25 09:50:41 +00:00
otc570 ARM926EJS (AT91SAM9263 SoC)
at91: Add esd gmbh MEESC board support This patch adds support for esd gmbh MEESC board. The MEESC is based on an Atmel AT91SAM9263 SoC. Signed-off-by: Daniel Gorsulowski <Daniel.Gorsulowski@esd.eu>
2009-06-30 19:03:37 +00:00
at91: Introduction of at91sam9g45 SOC. AT91sam9g45 series is an ARM 926ej-s SOC family clocked at 400/133MHz. It embeds USB high speed host and device, LCD, DDR2 RAM, and a full set of peripherals. The first board that embeds at91sam9g45 chip is the AT91SAM9G45-EKES. On the board you can find 2 USART, USB high speed, a 480*272 LG lcd, ethernet, gpio/joystick/buttons. Signed-off-by: Sedji Gaouaou <sedji.gaouaou@atmel.com>
2009-07-09 08:16:29 +00:00
Sedji Gaouaou<sedji.gaouaou@atmel.com>
Coding Style cleanup; update CHANGELOG. Signed-off-by: Wolfgang Denk <wd@denx.de>
2009-07-23 20:23:23 +00:00
at91sam9g10ek ARM926EJS (AT91SAM9G10 SoC)
at91: Introduction of at91sam9g45 SOC. AT91sam9g45 series is an ARM 926ej-s SOC family clocked at 400/133MHz. It embeds USB high speed host and device, LCD, DDR2 RAM, and a full set of peripherals. The first board that embeds at91sam9g45 chip is the AT91SAM9G45-EKES. On the board you can find 2 USART, USB high speed, a 480*272 LG lcd, ethernet, gpio/joystick/buttons. Signed-off-by: Sedji Gaouaou <sedji.gaouaou@atmel.com>
2009-07-09 08:16:29 +00:00
at91sam9m10g45ek ARM926EJS (AT91SAM9G45 SoC)
Add support for Network Space v2 and parents This patch add support for the Network Space v2 board and parents, based on the Marvell Kirkwood 6281 SoC. This include Network Space (Max) v2 and Internet Space v2. Additional information is available at: http://lacie-nas.org/doku.php?id=network_space_v2 Signed-off-by: Simon Guinot <sguinot@lacie.com>
2011-06-17 14:11:33 +00:00
Simon Guinot <simon.guinot@sequanux.org>
inetspace_v2 ARM926EJS (Kirkwood SoC)
netspace_v2 ARM926EJS (Kirkwood SoC)
netspace_max_v2 ARM926EJS (Kirkwood SoC)
ARM: add support for LaCie 2Big Network v2 This patch adds support for the LaCie 2Big Network v2 board, based on the Marvell Kirkwood 6281 SoC. Additional information is available at: http://lacie-nas.org/doku.php?id=2big_network_v2 Signed-off-by: Simon Guinot <simon.guinot@sequanux.org>
2011-11-21 13:55:46 +00:00
net2big_v2 ARM926EJS (Kirkwood SoC)
Add support for Network Space v2 and parents This patch add support for the Network Space v2 board and parents, based on the Marvell Kirkwood 6281 SoC. This include Network Space (Max) v2 and Internet Space v2. Additional information is available at: http://lacie-nas.org/doku.php?id=network_space_v2 Signed-off-by: Simon Guinot <sguinot@lacie.com>
2011-06-17 14:11:33 +00:00
OMAP3: CM-T35: update MAINTAINERS file Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Acked-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
2011-04-18 21:49:26 +00:00
Igor Grinberg <grinberg@compulab.co.il>
cm-t35 ARM ARMV7 (OMAP3xx Soc)
Cleanup build problems (on Fedora Core x86_64 build host)
2005-08-03 20:32:02 +00:00
Kshitij Gupta <kshitij@ti.com>
Add last known maintainer for orphaned boards; reformat. Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-07-13 12:58:16 +00:00
omap1510inn ARM925T
omap1610inn ARM926EJS
Initial revision
2002-11-02 22:58:18 +00:00
kirkwood: add support for D-Link DNS-325 This patch adds support for D-Link DNS-325 ShareCenter NAS. Signed-off-by: Stefan Herbrechtsmeier <stefan@code.herbrechtsmeier.net> Cc: prafulla@marvell.com Cc: albert.u.boot@aribaud.net
2011-12-23 06:35:04 +00:00
Stefan Herbrechtsmeier <stefan@code.herbrechtsmeier.net>
dns325 ARM926EJS (Kirkwood SoC)
AM35x: Add support for AM3517EVM This patch adds basic support for the AM3517EVM. It includes: - Board files (.c and .h) - Default configuration file - Updates for Makefile Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com> Signed-off-by: Sanjeev Premi <premi@ti.com> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
2010-06-07 19:20:43 +00:00
Vaibhav Hiremath <hvaibhav@ti.com>
ARM: Rename arch/arm/cpu/arm_cortexa8 to armv7 The purpose of this patch is to prepare for adding the OMAP4 architecture, which is Cortex A9 Cortex A8 and A9 both belong to the armv7 architecture, hence the name change. The two architectures are similar enough that substantial code can be shared. Signed-off-by: Aneesh V <aneesh@ti.com> Signed-off-by: Steve Sakoman <steve@sakoman.com> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
2010-06-18 04:50:01 +00:00
am3517_evm ARM ARMV7 (AM35x SoC)
AM35x: Add support for AM3517EVM This patch adds basic support for the AM3517EVM. It includes: - Board files (.c and .h) - Default configuration file - Updates for Makefile Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com> Signed-off-by: Sanjeev Premi <premi@ti.com> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
2010-06-07 19:20:43 +00:00
OMAP3: Add Pandora support Add Pandora support. Signed-off-by: Grazvydas Ignotas <notasas@gmail.com> Signed-off-by: Dirk Behme <dirk.behme@googlemail.com> Signed-off-by: Jason Kridner <jkridner@beagleboard.org>
2009-01-28 20:39:58 +00:00
Grazvydas Ignotas <notasas@gmail.com>
ARM: Rename arch/arm/cpu/arm_cortexa8 to armv7 The purpose of this patch is to prepare for adding the OMAP4 architecture, which is Cortex A9 Cortex A8 and A9 both belong to the armv7 architecture, hence the name change. The two architectures are similar enough that substantial code can be shared. Signed-off-by: Aneesh V <aneesh@ti.com> Signed-off-by: Steve Sakoman <steve@sakoman.com> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
2010-06-18 04:50:01 +00:00
omap3_pandora ARM ARMV7 (OMAP3xx SoC)
OMAP3: Add Pandora support Add Pandora support. Signed-off-by: Grazvydas Ignotas <notasas@gmail.com> Signed-off-by: Dirk Behme <dirk.behme@googlemail.com> Signed-off-by: Jason Kridner <jkridner@beagleboard.org>
2009-01-28 20:39:58 +00:00
OMAP3: mvblx: Initial support for mvBlueLYNX-X Add support for the MATRIX VISION mvBlueLYNX-X, an OMAP3-based intelligent camera. Signed-off-by: Michael Jones <michael.jones@matrix-vision.de> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
2011-11-04 17:53:44 +00:00
Michael Jones <michael.jones@matrix-vision.de>
omap3_mvblx ARM ARMV7 (OMAP3xx SoC)
Add support for EDB93xx boards Added support for the following EDB93xx boards: EDB9301 EDB9302 EDB9302A EDB9307 EDB9307A EDB93012 EDB9315 EDB9315A Signed-off-by: Matthias Kaehlcke <matthias@kaehlcke.net>
2010-02-01 20:29:48 +00:00
Matthias Kaehlcke <matthias@kaehlcke.net>
edb9301 ARM920T (EP9301)
edb9302 ARM920T (EP9302)
edb9302a ARM920T (EP9302)
edb9307 ARM920T (EP9307)
edb9307a ARM920T (EP9307)
edb9312 ARM920T (EP9312)
edb9315 ARM920T (EP9315)
edb9315a ARM920T (EP9315)
* Patches by Reinhard Meyer, 14 Feb 2004: - update board/emk tree; use common flash driver - Corrected tested bits in machine check exception in cpu/mpc5xxx/traps.c [adapted for other PPC CPUs -- wd] - Added support for the M48T08 on the EVAL5200 board in rtc/mk48t59.c * Patch by Jon Diekema, 13 Feb 2004: Call show_boot_progress() whenever POST "FAILED" is printed. * Patch by Nishant Kamat, 13 Feb 2004: Add support for TI OMAP1610 H2 Board Fixes for cpu/arm926ejs/interrupt.c (based on Richard Woodruff's patch for arm925, 16 Oct 03) Fix for a timer bug in OMAP1610 Innovator Add support for CS0 (ROM)/CS3 (Flash) boot in OMAP1610 Innovator and H2 * Patches by Stephan Linz, 12 Feb 2004: - add support for NIOS timer with variable period preload counter value - prepare POST framework support for NIOS targets * Patch by Denis Peter, 11 Feb 2004: add POST support for the MIP405 board
2004-02-23 22:22:28 +00:00
Nishant Kamat <nskamat@ti.com>
Add last known maintainer for orphaned boards; reformat. Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-07-13 12:58:16 +00:00
omap1610h2 ARM926EJS
* Patches by Reinhard Meyer, 14 Feb 2004: - update board/emk tree; use common flash driver - Corrected tested bits in machine check exception in cpu/mpc5xxx/traps.c [adapted for other PPC CPUs -- wd] - Added support for the M48T08 on the EVAL5200 board in rtc/mk48t59.c * Patch by Jon Diekema, 13 Feb 2004: Call show_boot_progress() whenever POST "FAILED" is printed. * Patch by Nishant Kamat, 13 Feb 2004: Add support for TI OMAP1610 H2 Board Fixes for cpu/arm926ejs/interrupt.c (based on Richard Woodruff's patch for arm925, 16 Oct 03) Fix for a timer bug in OMAP1610 Innovator Add support for CS0 (ROM)/CS3 (Flash) boot in OMAP1610 Innovator and H2 * Patches by Stephan Linz, 12 Feb 2004: - add support for NIOS timer with variable period preload counter value - prepare POST framework support for NIOS targets * Patch by Denis Peter, 11 Feb 2004: add POST support for the MIP405 board
2004-02-23 22:22:28 +00:00
s5pc1xx: Add support for Samsung Goni board This patch adds support for the Samsung Goni board (S5PC110 SoC) Signed-off-by: Minkyu Kang <mk7.kang@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2010-05-31 13:02:42 +00:00
Minkyu Kang <mk7.kang@samsung.com>
armv7: add support for s5pc210 universal board This patch adds support for Samsung s5pc210 universal board Signed-off-by: Minkyu Kang <mk7.kang@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2011-01-24 06:33:50 +00:00
SMDKC100 ARM ARMV7 (S5PC100 SoC)
s5p_goni ARM ARMV7 (S5PC110 SoC)
S5PC2XX: Rename S5pc2XX to exynos As per new naming convention for Samsung SoC's, all Cortex-A9 and Cortex-A15 based SoC's will be classified under the name Exynos. Cortex-A9 and Cortex-A15 based SoC's will be sub-classified as Exynos4 and Exynos5 respectively. In order to better adapt and reuse code across various upcoming Samsung Exynos based boards, all uses of s5pc210 prefix/suffix/directory-names are renamed in this patch. s5pc210 is renamed as exynos4210 and S5PC210/s5pc210 suffix/prefix are renamed as exynos4/EXYNOS4. Signed-off-by: Chander Kashyap <chander.kashyap@linaro.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2011-12-06 23:34:12 +00:00
s5pc210_universal ARM ARMV7 (EXYNOS4210 SoC)
s5pc1xx: Add support for Samsung Goni board This patch adds support for the Samsung Goni board (S5PC110 SoC) Signed-off-by: Minkyu Kang <mk7.kang@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2010-05-31 13:02:42 +00:00
ARMV7: Add support for Samsung SMDKV310 Board SMDKV310 board is based on Samsung S5PV310 SOC. This SOC is very much similar to S5PC210. Signed-off-by: Chander Kashyap <chander.kashyap@linaro.org> Signed-off-by: Tushar Behera <tushar.behera@linaro.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2011-05-24 20:02:56 +00:00
Chander Kashyap <k.chander@samsung.com>
S5PC2XX: Rename S5pc2XX to exynos As per new naming convention for Samsung SoC's, all Cortex-A9 and Cortex-A15 based SoC's will be classified under the name Exynos. Cortex-A9 and Cortex-A15 based SoC's will be sub-classified as Exynos4 and Exynos5 respectively. In order to better adapt and reuse code across various upcoming Samsung Exynos based boards, all uses of s5pc210 prefix/suffix/directory-names are renamed in this patch. s5pc210 is renamed as exynos4210 and S5PC210/s5pc210 suffix/prefix are renamed as exynos4/EXYNOS4. Signed-off-by: Chander Kashyap <chander.kashyap@linaro.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2011-12-06 23:34:12 +00:00
origen ARM ARMV7 (EXYNOS4210 SoC)
SMDKV310 ARM ARMV7 (EXYNOS4210 SoC)
ARMV7: Add support for Samsung SMDKV310 Board SMDKV310 board is based on Samsung S5PV310 SOC. This SOC is very much similar to S5PC210. Signed-off-by: Chander Kashyap <chander.kashyap@linaro.org> Signed-off-by: Tushar Behera <tushar.behera@linaro.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2011-05-24 20:02:56 +00:00
ARMV7: Exynos4: Add support for TRATS board This patch adds support for Samsung TRATS board Signed-off-by: HeungJun, Kim <riverful.kim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2012-01-16 21:13:05 +00:00
Heungjun Kim <riverful.kim@samsung.com>
trats ARM ARMV7 (EXYNOS4210 SoC)
ARM: Update maintainer of board scb9328 Signed-off-by: Torsten Koschorrek <koschorrek@synertronixx.de>
2011-07-06 05:41:02 +00:00
Torsten Koschorrek <koschorrek@synertronixx.de>
scb9328 ARM920T (i.MXL)
[ARM] TI DaVinci support, hopefully final Add support for the following DaVinci boards: - DV_EVM - SCHMOOGIE - SONATA Changes: - Split into separate board directories - Removed changes to MTD_DEBUG (or whatever it's called) - New CONFIG_CMD party line followed - Some cosmetic fixes, cleanup etc. - Patches against the latest U-Boot tree as of now. - Fixed CONFIG_CMD_NET in net files. - Fixed CONFIG_CMD_EEPROM for schmoogie. - Made sure it compiles and works (forceenv() link problem) on SCHMOOGIE and DV_EVM. Can't check if it works on SONATA, don't have a board any more, but it at least compiles. Here is an excerpt from session log on SCHMOOGIE... U-Boot 1.2.0-g6c33c785-dirty (Aug 7 2007 - 13:07:17) DRAM: 128 MB NAND: 128 MiB In: serial Out: serial Err: serial ARM Clock : 297MHz DDR Clock : 162MHz ETH PHY : DP83848 @ 0x01 U-Boot > iprobe Valid chip addresses: 1B 38 3A 3D 3F 50 5D 6F U-Boot > ping 192.168.253.10 host 192.168.253.10 is alive U-Boot > Signed-off-by: Sergey Kubushyn <ksi@koi8.net> Acked-by: Dirk Behme <dirk.behme@gmail.com> Acked-by: Zach Sadecki <Zach.Sadecki@ripcode.com> Acked-by: Stefan Roese <sr@denx.de>
2007-08-10 18:26:18 +00:00
Sergey Kubushyn <ksi@koi8.net>
Add last known maintainer for orphaned boards; reformat. Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-07-13 12:58:16 +00:00
DV-EVM ARM926EJS
SONATA ARM926EJS
SCHMOOGIE ARM926EJS
[ARM] TI DaVinci support, hopefully final Add support for the following DaVinci boards: - DV_EVM - SCHMOOGIE - SONATA Changes: - Split into separate board directories - Removed changes to MTD_DEBUG (or whatever it's called) - New CONFIG_CMD party line followed - Some cosmetic fixes, cleanup etc. - Patches against the latest U-Boot tree as of now. - Fixed CONFIG_CMD_NET in net files. - Fixed CONFIG_CMD_EEPROM for schmoogie. - Made sure it compiles and works (forceenv() link problem) on SCHMOOGIE and DV_EVM. Can't check if it works on SONATA, don't have a board any more, but it at least compiles. Here is an excerpt from session log on SCHMOOGIE... U-Boot 1.2.0-g6c33c785-dirty (Aug 7 2007 - 13:07:17) DRAM: 128 MB NAND: 128 MiB In: serial Out: serial Err: serial ARM Clock : 297MHz DDR Clock : 162MHz ETH PHY : DP83848 @ 0x01 U-Boot > iprobe Valid chip addresses: 1B 38 3A 3D 3F 50 5D 6F U-Boot > ping 192.168.253.10 host 192.168.253.10 is alive U-Boot > Signed-off-by: Sergey Kubushyn <ksi@koi8.net> Acked-by: Dirk Behme <dirk.behme@gmail.com> Acked-by: Zach Sadecki <Zach.Sadecki@ripcode.com> Acked-by: Stefan Roese <sr@denx.de>
2007-08-10 18:26:18 +00:00
SPEAr : Adding maintainer name for spear SoCs Signed-off-by: Vipin Kumar <vipin.kumar@st.com>
2010-03-08 05:16:07 +00:00
Vipin Kumar <vipin.kumar@st.com>
spear300 ARM926EJS (spear300 Soc)
spear310 ARM926EJS (spear310 Soc)
spear320 ARM926EJS (spear320 Soc)
spear600 ARM926EJS (spear600 Soc)
MAINTAINERS: fix sorting, remove duplicates. Signed-off-by: Wolfgang Denk <wd@denx.de>
2009-07-09 07:56:16 +00:00
Sergey Lapin <slapin@ossfans.org>
afeb9260 ARM926EJS (AT91SAM9260 SoC)
arm/km: replace suenx targets with km_kirkwood suen3 and suen8 were in first HW version quite different, but now they are from a u-boot point of view similar. So these two boards can use the same header file. Other keymile boards differ only in the usage of the PCI interface. Therefore a target km_kirkwood_pci was introduced. All targets use the same header file. Signed-off-by: Holger Brunck <holger.brunck@keymile.com> Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com> cc: Prafulla Wadaskar <prafulla@marvell.com> cc: Heiko Schocher <hs@denx.de>
2011-06-16 12:41:15 +00:00
Valentin Longchamp <valentin.longchamp@keymile.com>
km_kirkwood ARM926EJS (Kirkwood SoC)
arm/km: add support for portl2 board This adds support for the keymile Kirkwood BEC portl2 board. This board relies on the km_arm (km_kirkwood) BEC. The egiga driver is configured for a 100M full-duplex, A/N off connnection to the backplane. This board has always ethernet present, because it is connected to the marvell switch similar to mgcoge3un. The reset_phy functionality is also the same to mgcoge3un. Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com> Signed-off-by: Holger Brunck <holger.brunck@keymile.com> cc: Prafulla Wadaskar <prafulla@marvell.com> cc: Heiko Schocher <hs@denx.de>
2011-06-16 12:41:15 +00:00
portl2 ARM926EJS (Kirkwood SoC)
arm/km: replace suenx targets with km_kirkwood suen3 and suen8 were in first HW version quite different, but now they are from a u-boot point of view similar. So these two boards can use the same header file. Other keymile boards differ only in the usage of the PCI interface. Therefore a target km_kirkwood_pci was introduced. All targets use the same header file. Signed-off-by: Holger Brunck <holger.brunck@keymile.com> Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com> cc: Prafulla Wadaskar <prafulla@marvell.com> cc: Heiko Schocher <hs@denx.de>
2011-06-16 12:41:15 +00:00
OMAP3: Add Zoom1 board support Support for Zoom MDK with OMAP3430. Details of Zoom MDK available here: http://www.logicpd.com/products/devkit/ti/zoom_mobile_development_kit Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Jason Kridner <jkridner@beagleboard.org>
2009-01-28 20:40:16 +00:00
Nishanth Menon <nm@ti.com>
ARM: Rename arch/arm/cpu/arm_cortexa8 to armv7 The purpose of this patch is to prepare for adding the OMAP4 architecture, which is Cortex A9 Cortex A8 and A9 both belong to the armv7 architecture, hence the name change. The two architectures are similar enough that substantial code can be shared. Signed-off-by: Aneesh V <aneesh@ti.com> Signed-off-by: Steve Sakoman <steve@sakoman.com> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
2010-06-18 04:50:01 +00:00
omap3_sdp3430 ARM ARMV7 (OMAP3xx SoC)
omap3_zoom1 ARM ARMV7 (OMAP3xx SoC)
OMAP3: Add Zoom1 board support Support for Zoom MDK with OMAP3430. Details of Zoom MDK available here: http://www.logicpd.com/products/devkit/ti/zoom_mobile_development_kit Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Jason Kridner <jkridner@beagleboard.org>
2009-01-28 20:40:16 +00:00
Convert ISO-8859 files to UTF-8 There was a mix of UTF-8 and ISO-8859 files in the U-Boot source tree, which could cause issues with the patchwork review system. This commit converts all ISO-8859 files to UTF-8. Signed-off-by: Albert ARIBAUD <albert.u.boot@aribaud.net>
2011-08-04 16:45:45 +00:00
David Müller <d.mueller@elsoft.ch>
Initial revision
2002-11-02 22:58:18 +00:00
Add last known maintainer for orphaned boards; reformat. Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-07-13 12:58:16 +00:00
smdk2410 ARM920T
VCMA9 ARM920T
Initial revision
2002-11-02 22:58:18 +00:00
Add support for the galaxy5200 Add support for the DEKA Research and Development galaxy5200 board The galaxy5200 is an Freescale mpc5200 based embedded industrial control board. Signed-off-by: Eric Millbrandt <emillbrandt@dekaresearch.com>
2009-08-13 15:14:21 +00:00
Eric Millbrandt <emillbrandt@dekaresearch.com>
galaxy5200 mpc5200
ARMV7: AM3517/05: Add support for CraneBoard. It is a low cost reference design based on Sitara AM3517 SoC from Texas Instruments Please refer to <www.craneboard.org> for more details. Signed-off-by: Srinath <srinath@mistralsolutions.com> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
2011-04-18 21:40:35 +00:00
Nagendra T S <nagendra@mistralsolutions.com>
am3517_crane ARM ARMV7 (AM35x SoC)
ARM:AM33XX: Add support for TI AM335X EVM This patch adds basic support for booting the board. This patch adds support for the UART necessary to get to the u-boot prompt. Signed-off-by: Chandan Nath <chandan.nath@ti.com> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
2011-10-14 02:58:26 +00:00
Chandan Nath <chandan.nath@ti.com>
am335x_evm ARM ARMV7 (AM33xx Soc)
MAINTAINERS: sort entries Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-08-10 22:17:52 +00:00
Kyungmin Park <kyungmin.park@samsung.com>
apollon ARM1136EJS
MAINTAINERS: sort the list of ARM Maintainers by last name Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2010-03-08 07:22:33 +00:00
Sandeep Paulraj <s-paulraj@ti.com>
davinci_dm355evm ARM926EJS
davinci_dm355leopard ARM926EJS
davinci_dm365evm ARM926EJS
davinci_dm6467evm ARM926EJS
mx31: Add board support for HALE TT-01 This adds basic board support for TT-01 based on the Bluetechnix i.MX31 SOM. Currently only NOR-Flash boot is implemented. Signed-off-by: Helmut Raiger <helmut.raiger@hale.at> Acked-by: Stefano Babic <sbabic@denx.de>
2011-10-27 01:31:15 +00:00
Helmut Raiger <helmut.raiger@hale.at>
tt01 i.MX31
MAINTAINERS: integrator+versatile boards - Take maintainership of the unlisted integratorap board - Orphan the boards maintained by Peter Pearse, as he has retired from ARM Cc: Philippe Robin <philippe.robin@arm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-07-15 02:15:41 +00:00
Linus Walleij <linus.walleij@linaro.org>
MAINTAINERS: fix integrator and versatile - Take maintainership of the integratorcp board - Remove the double entry for the versatile board it has two variants but only one board folder Cc: Philippe Robin <philippe.robin@arm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-07-28 12:54:14 +00:00
integratorap various
integratorcp various
Move ppearse to ARM board list Add Konstantin Kletschke for scb9328. Signed-off-by: Peter Pearse <peter.pearse@arm.com>
2007-04-17 12:30:33 +00:00
Cleanup build problems (on Fedora Core x86_64 build host)
2005-08-03 20:32:02 +00:00
Dave Peverley <dpeverley@mpc-data.co.uk>
Add last known maintainer for orphaned boards; reformat. Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-07-13 12:58:16 +00:00
omap730p2 ARM926EJS
Cleanup build problems (on Fedora Core x86_64 build host)
2005-08-03 20:32:02 +00:00
Fix Stelian's email address Change my old email address which is no longer valid. Signed-off-by: Stelian Pop <stelian@popies.net> Signed-off-by: Anatolij Gustschin <agust@denx.de>
2011-10-31 23:00:39 +00:00
Stelian Pop <stelian@popies.net>
Add maintainership information for AT91CAP9ADK and AT91SAM9260EK boards Signed-off-by: Stelian Pop <stelian@popies.net>
2008-03-26 17:52:34 +00:00
Add last known maintainer for orphaned boards; reformat. Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-07-13 12:58:16 +00:00
at91sam9260ek ARM926EJS (AT91SAM9260 SoC)
at91sam9261ek ARM926EJS (AT91SAM9261 SoC)
at91sam9263ek ARM926EJS (AT91SAM9263 SoC)
at91sam9rlek ARM926EJS (AT91SAM9RL SoC)
Add maintainership information for AT91CAP9ADK and AT91SAM9260EK boards Signed-off-by: Stelian Pop <stelian@popies.net>
2008-03-26 17:52:34 +00:00
tegra2: Add Avionic Design Plutux support. The Plutux is a set-top box device based on the Tamonten processor module. It can be connected to a display via an HDMI output. Changes in v3: * Remove unused implementation of gpio_config_uart(). * Implement MMC/SD card detection. * Drop board_mmc_getcd() which is now implemented by common Tegra2 code. * Add MAINTAINERS entry. Changes in v2: * No longer override the default CONFIG_SYS_TEXT_BASE setting. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Acked-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
2011-11-17 00:10:25 +00:00
Thierry Reding <thierry.reding@avionic-design.de>
plutux Tegra2 (ARM7 & A9 Dual Core)
tegra2: Add Avionic Design Medcom support. The Medcom is a 16:9 15" terminal that is used for patient infotainment in hospitals. Changes in v3: * Remove unused implementation of gpio_config_uart(). * Implement MMC/SD card detection. * Drop board_mmc_getcd() which is now implemented by common Tegra2 code. * Add MAINTAINERS entry. Changes in v2: * No longer override the default CONFIG_SYS_TEXT_BASE setting. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Acked-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
2011-11-17 00:10:26 +00:00
medcom Tegra2 (ARM7 & A9 Dual Core)
tegra2: Add Avionic Design Plutux support. The Plutux is a set-top box device based on the Tamonten processor module. It can be connected to a display via an HDMI output. Changes in v3: * Remove unused implementation of gpio_config_uart(). * Implement MMC/SD card detection. * Drop board_mmc_getcd() which is now implemented by common Tegra2 code. * Add MAINTAINERS entry. Changes in v2: * No longer override the default CONFIG_SYS_TEXT_BASE setting. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Acked-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
2011-11-17 00:10:25 +00:00
OMAP3: Change omap3_evm maintainer Cc: Albert ARIBAUD <albert.u.boot@aribaud.net> Cc: Sandeep Paulraj <s-paulraj@ti.com> Signed-off-by: Tom Rini <trini@ti.com> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
2011-11-09 21:40:08 +00:00
Tom Rini <trini@ti.com>
omap3_evm ARM ARMV7 (OMAP3xx SoC)
ZOOM2 Add initial support for Zoom2 Zoom2 is a new board from Texas Instruments and LogicPD The logicpd web site is a good source for general information on this board. Please start looking here if the below links are broken. http://www.logicpd.com This is a pdf of the product http://www.logicpd.com/sites/default/files/1012659A_Zoom_OMAP34x-II_MDP_Brief.pdf This is the product description web page http://www.logicpd.com/products/development-kits/texas-instruments-zoom%E2%84%A2-omap34x-ii-mdp This patch provides a zoom2 base target by copying zoom1 and by making some obvious changes. To configure, run make omap3_zoom2_config Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
2009-05-15 21:48:36 +00:00
Tom Rix <Tom.Rix@windriver.com>
ARM: Rename arch/arm/cpu/arm_cortexa8 to armv7 The purpose of this patch is to prepare for adding the OMAP4 architecture, which is Cortex A9 Cortex A8 and A9 both belong to the armv7 architecture, hence the name change. The two architectures are similar enough that substantial code can be shared. Signed-off-by: Aneesh V <aneesh@ti.com> Signed-off-by: Steve Sakoman <steve@sakoman.com> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
2010-06-18 04:50:01 +00:00
omap3_zoom2 ARM ARMV7 (OMAP3xx SoC)
ZOOM2 Add initial support for Zoom2 Zoom2 is a new board from Texas Instruments and LogicPD The logicpd web site is a good source for general information on this board. Please start looking here if the below links are broken. http://www.logicpd.com This is a pdf of the product http://www.logicpd.com/sites/default/files/1012659A_Zoom_OMAP34x-II_MDP_Brief.pdf This is the product description web page http://www.logicpd.com/products/development-kits/texas-instruments-zoom%E2%84%A2-omap34x-ii-mdp This patch provides a zoom2 base target by copying zoom1 and by making some obvious changes. To configure, run make omap3_zoom2_config Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
2009-05-15 21:48:36 +00:00
Add support for KARO TX25 board This is an i.MX25 base board with only NAND so it uses nand_spl to boot. Signed-off-by: John Rigby <jcrigby@gmail.com> Tune configuration, add support for (redundant) environment in NAND. Signed-off-by: Wolfgang Denk <wd@denx.de> Acked-by: Wolfgang Denk <wd@denx.de> CC: Fred Fan <fanyefeng@gmail.com> CC: Tom <Tom.Rix@windriver.com>
2010-01-26 06:12:58 +00:00
John Rigby <jcrigby@gmail.com>
tx25 i.MX25
* Update Intel IXP4xx support - Add IXP4xx NPE ethernet MAC support - Add support for Intel IXDPG425 board - Add support for Prodrive PDNB3 board - Add IRQ support Patch by Stefan Roese, 23 May 2006 [This patch does not include cpu/ixp/npe/IxNpeMicrocode.c which still sufferes from licensing issues. Blame Intel.]
2006-05-30 13:56:48 +00:00
Stefan Roese <sr@denx.de>
add XScale sub architecture (IXP/PXA) to maintainer list Signed-off-by: Michael Schwingen <michael@schwingen.org>
2011-05-22 21:59:57 +00:00
pdnb3 xscale/ixp
scpu xscale/ixp
* Update Intel IXP4xx support - Add IXP4xx NPE ethernet MAC support - Add support for Intel IXDPG425 board - Add support for Prodrive PDNB3 board - Add IRQ support Patch by Stefan Roese, 23 May 2006 [This patch does not include cpu/ixp/npe/IxNpeMicrocode.c which still sufferes from licensing issues. Blame Intel.]
2006-05-30 13:56:48 +00:00
Initial support for Nomadik 8815 development board The NMDK8815 board is distributed by ST Microelectornics. Other (proprietary) code must be run to unlock the CPU before U-Boot runs. doc/README.nmdk8815 outlines the boot sequence. This is the initial port, with basic infrastructure and a working serial port. Signed-off-by: Alessandro Rubini <rubini@unipv.it> Acked-by: Andrea Gallo <andrea.gallo@stnwireless.com> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2009-01-24 17:10:37 +00:00
Alessandro Rubini <rubini@unipv.it>
Nomadik Linux Team <STN_WMM_nomadik_linux@list.st.com>
MAINTAINERS: fix nhk8815 board name Signed-off-by: Alessandro Rubini <rubini@unipv.it>
2010-01-18 21:38:38 +00:00
nhk8815 ARM926EJS (Nomadik 8815 Soc)
Initial support for Nomadik 8815 development board The NMDK8815 board is distributed by ST Microelectornics. Other (proprietary) code must be run to unlock the CPU before U-Boot runs. doc/README.nmdk8815 outlines the boot sequence. This is the initial port, with basic infrastructure and a working serial port. Signed-off-by: Alessandro Rubini <rubini@unipv.it> Acked-by: Andrea Gallo <andrea.gallo@stnwireless.com> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2009-01-24 17:10:37 +00:00
OMAP3: Add Overo board Add Overo board support. Signed-off-by: Steve Sakoman <sakoman@gmail.com> Signed-off-by: Dirk Behme <dirk.behme@googlemail.com> Signed-off-by: Jason Kridner <jkridner@beagleboard.org>
2009-01-28 20:39:57 +00:00
Steve Sakoman <sakoman@gmail.com>
ARM: Rename arch/arm/cpu/arm_cortexa8 to armv7 The purpose of this patch is to prepare for adding the OMAP4 architecture, which is Cortex A9 Cortex A8 and A9 both belong to the armv7 architecture, hence the name change. The two architectures are similar enough that substantial code can be shared. Signed-off-by: Aneesh V <aneesh@ti.com> Signed-off-by: Steve Sakoman <steve@sakoman.com> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
2010-06-18 04:50:01 +00:00
omap3_overo ARM ARMV7 (OMAP3xx SoC)
OMAP3: Add Overo board Add Overo board support. Signed-off-by: Steve Sakoman <sakoman@gmail.com> Signed-off-by: Dirk Behme <dirk.behme@googlemail.com> Signed-off-by: Jason Kridner <jkridner@beagleboard.org>
2009-01-28 20:39:57 +00:00
new board (eb_cpux9k2) * new board (eb_cpux9k2) * support for EB+CPUx9K2 board by BuS Elektronik GmbH & Co. KG * select via make eb_cpux9k2_config * this also demonstrates, how to use boards with AT91RM9200 cpu in at91 arch tree Signed-off-by: Jens Scharsig <js_at_ng@scharsoft.de>
2010-02-03 21:48:09 +00:00
Jens Scharsig <esw@bus-elektronik.de>
eb_cpux9k2 ARM920T (AT91RM9200 SoC)
arm, i.mx27: add support for magnesium board from projectiondesign This patch adds support for the magnesium board from projectiondesign. This board uses i.MX27 SoC and has 8MB NOR flash, 128MB NAND flash, FEC ethernet controller integrated into i.MX27. As this port is based on the imx27lite port, common config options are collected in include/configs/imx27lite-common.h Signed-off-by: Heiko Schocher <hs@denx.de>
2010-03-05 06:36:33 +00:00
Heiko Schocher <hs@denx.de>
arm, davinci: add support for am1808 based enbw_cmc board - booting from NOR Flash with direct boot method - POST support - LOGBUF support Signed-off-by: Heiko Schocher <hs@denx.de> Cc: Paulraj Sandeep <s-paulraj@ti.com> Cc: Albert ARIBAUD <albert.u.boot@aribaud.net> Cc: Igor Grinberg <grinberg@compulab.co.il> Cc: Christian Riesch <christian.riesch@omicron.at>
2011-11-29 02:33:47 +00:00
enbw_cmc ARM926EJS (AM1808 SoC)
arm, i.mx27: add support for magnesium board from projectiondesign This patch adds support for the magnesium board from projectiondesign. This board uses i.MX27 SoC and has 8MB NOR flash, 128MB NAND flash, FEC ethernet controller integrated into i.MX27. As this port is based on the imx27lite port, common config options are collected in include/configs/imx27lite-common.h Signed-off-by: Heiko Schocher <hs@denx.de>
2010-03-05 06:36:33 +00:00
magnesium i.MX27
arm/km: rename mgcoge2un to mgcoge3un The mgcoge2un target was only an intermediate step to mgcoge3un. For this reason the mgcoge2un support was moved to mgcoge3un, because it isn't needed to support both targets. We add the BootROM init file for the mgcoge3un memphis RAM. We also move the suen3 and suen8 boards into the correct category in the MAINTAINERS file. Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com> Signed-off-by: Holger Brunck <holger.brunck@keymile.com> Acked-by: Heiko Schocher <hs@denx.de> cc: Wolfgang Denk <wd@denx.de> cc: Detlev Zundel <dzu@denx.de> cc: Prafulla Wadaskar <prafulla@marvell.com>
2011-05-31 02:12:50 +00:00
mgcoge3un ARM926EJS (Kirkwood SoC)
arm, i.mx27: add support for magnesium board from projectiondesign This patch adds support for the magnesium board from projectiondesign. This board uses i.MX27 SoC and has 8MB NOR flash, 128MB NAND flash, FEC ethernet controller integrated into i.MX27. As this port is based on the imx27lite port, common config options are collected in include/configs/imx27lite-common.h Signed-off-by: Heiko Schocher <hs@denx.de>
2010-03-05 06:36:33 +00:00
MAINTAINERS: sort entries Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-08-10 22:17:52 +00:00
Michael Schwingen <michael@schwingen.org>
add XScale sub architecture (IXP/PXA) to maintainer list Signed-off-by: Michael Schwingen <michael@schwingen.org>
2011-05-22 21:59:57 +00:00
actux1 xscale/ixp
actux2 xscale/ixp
actux3 xscale/ixp
actux4 xscale/ixp
add dvlhost (dLAN 200 AV Wireless G) board Signed-off-by: Michael Schwingen <michael@schwingen.org>
2011-05-22 22:00:09 +00:00
dvlhost xscale/ixp
MAINTAINERS: sort entries Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-08-10 22:17:52 +00:00
TI DA8xx: Integrate DA830 EVM support into U-Boot Integrate DA830 EVM support into U-Boot. Provides initial support for TI OMAP-L137/DA830 SoC devices on a Spectrum Digital EVM board. See http://www.spectrumdigital.com/ Signed-off-by: Nick Thompson <nick.thompson@gefanuc.com>
2009-11-12 16:09:25 +00:00
Nick Thompson <nick.thompson@gefanuc.com>
da830evm ARM926EJS (DA830/OMAP-L137)
Add support for the Calao SBC35-A9G20 board The Calao SBC35-A9G20 board is manufactured and sold by Calao Systems <http://www.calao-systems.com>. It is built around an AT91SAM9G20 ARM SoC running at 400MHz. It features an Ethernet port, an SPI RTC backed by an onboard battery , an SD/MMC slot, a CompactFlash slot, 64Mo of SDRAM, 256Mo of NAND flash, two USB host ports, and an USB device port. More informations can be found at <http://www.calao-systems.com/articles.php?lng=en&pg=5936> Signed-off-by: Albin Tonnerre <albin.tonnerre@free-electrons.com>
2009-08-24 16:03:26 +00:00
Albin Tonnerre <albin.tonnerre@free-electrons.com>
sbc35_a9g20 ARM926EJS (AT91SAM9G20 SoC)
Support for the Calao TNY-A9260/TNY-A9G20 boards The Calao TNY-A9260 and TNY-9G20 are boards manufactured and sold by Calao Systems <http://www.calao-systems.com>. Their components are very similar to the AT91SAM9260EK board, so their configuration is based on the configuration of this board. There are however some differences: different clocks, no LCD, no ethernet. They also can use SPI EEPROM to store the environment. Signed-off-by: Albin Tonnerre <albin.tonnerre@free-electrons.com> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2009-08-20 14:04:49 +00:00
tny_a9260 ARM926EJS (AT91SAM9260 SoC)
tny_a9g20 ARM926EJS (AT91SAM9G20 SoC)
Add support for the Calao SBC35-A9G20 board The Calao SBC35-A9G20 board is manufactured and sold by Calao Systems <http://www.calao-systems.com>. It is built around an AT91SAM9G20 ARM SoC running at 400MHz. It features an Ethernet port, an SPI RTC backed by an onboard battery , an SD/MMC slot, a CompactFlash slot, 64Mo of SDRAM, 256Mo of NAND flash, two USB host ports, and an USB device port. More informations can be found at <http://www.calao-systems.com/articles.php?lng=en&pg=5936> Signed-off-by: Albin Tonnerre <albin.tonnerre@free-electrons.com>
2009-08-24 16:03:26 +00:00
* Patch by Greg Ungerer, 19 May 2005: add support for the KS8695P (ARM 922 based) CPU * Patch by Steven Scholz, 19 May 2005: Add support for CONFIG_SERIAL_TAG on ARM boards
2005-05-19 22:39:42 +00:00
Greg Ungerer <greg.ungerer@opengear.com>
Add last known maintainer for orphaned boards; reformat. Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-07-13 12:58:16 +00:00
cm4008 ks8695p
cm4116 ks8695p
cm4148 ks8695p
* Patch by Greg Ungerer, 19 May 2005: add support for the KS8695P (ARM 922 based) CPU * Patch by Steven Scholz, 19 May 2005: Add support for CONFIG_SERIAL_TAG on ARM boards
2005-05-19 22:39:42 +00:00
omap4: update maintainer for omap4 boards Steve wants to transfer maintainership of OMAP4 boards to me as he is not working on these boards lately. CC: Steve Sakoman <steve@sakoman.com> CC: Sandeep Paulraj <s-paulraj@ti.com> CC: Albert Aribaud <albert.u.boot@aribaud.net> CC: Wolfgang Denk <wd@denx.de> Signed-off-by: Aneesh V <aneesh@ti.com> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
2011-09-23 01:06:17 +00:00
Aneesh V <aneesh@ti.com>
omap4_panda ARM ARMV7 (OMAP4xx SoC)
omap4_sdp4430 ARM ARMV7 (OMAP4xx SoC)
omap5: Add minimal support for omap5430. This patch adds the minimal support for OMAP5. The platform and machine specific headers and sources updated for OMAP5430. OMAP5430 is Texas Instrument's SOC based on ARM Cortex-A15 SMP architecture. It's a dual core SOC with GIC used for interrupt handling and SCU for cache coherency. Also moved some part of code from the basic platform support that can be made common for OMAP4/5. Rest is kept out seperately. The same approach is followed for clocks and emif support in the subsequent patches. Signed-off-by: sricharan <r.sricharan@ti.com> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
2011-11-15 14:49:55 +00:00
omap5_evm ARM ARMV7 (OMAP5xx Soc)
omap4: update maintainer for omap4 boards Steve wants to transfer maintainership of OMAP4 boards to me as he is not working on these boards lately. CC: Steve Sakoman <steve@sakoman.com> CC: Sandeep Paulraj <s-paulraj@ti.com> CC: Albert Aribaud <albert.u.boot@aribaud.net> CC: Wolfgang Denk <wd@denx.de> Signed-off-by: Aneesh V <aneesh@ti.com> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
2011-09-23 01:06:17 +00:00
PXA: Palm Tungsten|C Support This patch adds support for the Palm Tungsten|C PXA255 board. The support includes: - LCD - MMC - UART - NOR Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
2010-07-18 03:23:19 +00:00
Marek Vasut <marek.vasut@gmail.com>
add XScale sub architecture (IXP/PXA) to maintainer list Signed-off-by: Michael Schwingen <michael@schwingen.org>
2011-05-22 21:59:57 +00:00
balloon3 xscale/pxa
colibri_pxa270 xscale/pxa
palmld xscale/pxa
palmtc xscale/pxa
vpac270 xscale/pxa
zipitz2 xscale/pxa
iMX28: Add support for DENX M28EVK board This contains support for the following components: - DUART - MMC - Both FEC interfaces - NAND - I2C (RTC, EEPROM) - SPI (FLASH) Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Wolfgang Denk <wd@denx.de> Cc: Detlev Zundel <dzu@denx.de>
2011-11-08 23:18:20 +00:00
m28evk i.MX28
iMX5: EfikaMX: Preliminary board support Supported: MMC IDE PMIC SPI flash LEDs I can boot the kernel supplied by freescale/genesi with this from MMC card and/or PATA disk. Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
2011-01-19 04:40:37 +00:00
efikamx i.MX51
EfikaMX: Add imximage config for Efika SB Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Cc: Stefano Babic <sbabic@denx.de>
2011-09-25 09:52:04 +00:00
efikasb i.MX51
PXA: Palm Tungsten|C Support This patch adds support for the Palm Tungsten|C PXA255 board. The support includes: - LCD - MMC - UART - NOR Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
2010-07-18 03:23:19 +00:00
ARM DaVinci: Add maintainer information for SFFSDR board. Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
2008-10-06 14:53:59 +00:00
Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
SFFSDR ARM926EJS
ARMV7: Versatile Express Coretile CortexA9x4 support Adds support for the ARM quad-core Cortex-A9 processor This system includes a motherboard(Versatile Express), daughterboard (Coretile), and SOC(Cortex-A9 quad core). The serial port, ethernet, and flash systems work with these additions. The naming convention is: SOC -> CortexA9 quad core = ca9x4 daughterboard -> Coretile = ct motherboard -> Versatile Express = vxp This gives ca9x4_ct_vxp.c as the board support file. Signed-off-by: Matt Waddel <matt.waddel@linaro.org>
2010-10-07 21:48:45 +00:00
Matt Waddel <matt.waddel@linaro.org>
ca9x4_ct_vxp ARM ARMV7 (Quad Core)
Marvell Sheevaplug Board support Reference: http://plugcomputer.org/ http://openplug.org/plugwiki/index.php/Das_U-boot_plug_support This patch is tested for- 1. Boot from DRAM/NAND flash 2. File transfer using tftp 3. NAND flash read/write/erase 4. Linux kernel and RFS Boot from NAND 5. Enabled USB PHY init for kernel need 6. Boot from USB supported Note: to boot Kirkwood kernel with USB support, you should add "usb start" in the boot sequence Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
2009-07-16 15:28:00 +00:00
Prafulla Wadaskar <prafulla@marvell.com>
Armada100: Add Board Support for Marvell Aspenite-DB Aspenite is a Development Board for ASPEN/ARMADA168(88AP168) with * Processor upto 1.2GHz * Parallel 1Gb x8 DDR2-1066 MHz * 16 Mb x16 NOR, 4Gb x8 SLC NAND, footprint for SPI NOR * Footprints for eMMC/eSD NAND & MMC x8 card * 4-in-1 card reader (xD, MMC/SD/MS Pro), CF True IDE socket * SEAF memory board, subset of PISMO2 With Peripherals: * 4.3” WVGA 24-bit LCD * Audio codecs (AC97 & I2S), TSI * VGA camera * Video in via 3 RCA jacks, and HDMI type C out * Marvell 88W8688 802.11bg/BT module * GPS RF IC * Dual analog mics & speakers, headset jack, LED, ambient light sensor * USB2.0 HS host (A), OTG (micro AB) * FE PHY, PCIE Mini Card slot * GPIO, GPIO expander with DIP switches for easier selection UART serial over USB, CIR This patch adds basic board support with DRAM and UART functionality The patch is tested for boot from DRAM using XDB Signed-off-by: Mahavir Jain <mjain@marvell.com> Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
2010-11-29 11:31:27 +00:00
aspenite ARM926EJS (ARMADA100 88AP168 SoC)
Marvell MV88F6281GTW_GE Board support This is Marvell's 88F6281_A0 based custom board developed for wireless access point product This patch is tested for- 1. Boot from DRAM/SPI flash/NFS 2. File transfer using tftp and loadb 3. SPI flash read/write/erase 4. Booting Linux kernel and RFS from SPI flash 5. Boot from USB supported Reviewed-by: Ronen Shitrit <rshitrit@marvell.com> Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
2009-07-16 15:28:01 +00:00
mv88f6281gtw_ge ARM926EJS (Kirkwood SoC)
MAINTAINERS: Transfer openrd_base maintainership to Prafulla Wadaskar Signed-off-by: Simon Kagstrom <simon.kagstrom@netinsight.net>
2010-12-11 18:08:57 +00:00
openrd_base ARM926EJS (Kirkwood SoC)
Marvell RD6281A Board support This is Marvell's 88F6281_A0 based reference design board This patch is tested for- 1. Boot from DRAM/NAND flash/NFS 2. File transfer using tftp and loadb 3. NAND flash read/write/erase Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2009-07-16 15:32:24 +00:00
rd6281a ARM926EJS (Kirkwood SoC)
Marvell Sheevaplug Board support Reference: http://plugcomputer.org/ http://openplug.org/plugwiki/index.php/Das_U-boot_plug_support This patch is tested for- 1. Boot from DRAM/NAND flash 2. File transfer using tftp 3. NAND flash read/write/erase 4. Linux kernel and RFS Boot from NAND 5. Enabled USB PHY init for kernel need 6. Boot from USB supported Note: to boot Kirkwood kernel with USB support, you should add "usb start" in the boot sequence Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
2009-07-16 15:28:00 +00:00
sheevaplug ARM926EJS (Kirkwood SoC)
arm: Tegra2: Add support for NVIDIA Harmony board Signed-off-by: Tom Warren <twarren@nvidia.com>
2011-01-27 10:58:07 +00:00
Tom Warren <twarren@nvidia.com>
harmony Tegra2 (ARM7 & A9 Dual Core)
arm: Tegra2: Add support for NVIDIA Seaboard board Signed-off-by: Tom Warren <twarren@nvidia.com>
2011-01-27 10:58:08 +00:00
seaboard Tegra2 (ARM7 & A9 Dual Core)
arm: Tegra2: Add support for NVIDIA Harmony board Signed-off-by: Tom Warren <twarren@nvidia.com>
2011-01-27 10:58:07 +00:00
tegra2: Add support for Ventana Ventana is a board which is very similar to Seaboard. Support it by re-using board/nvidia/seaboard/seaboard.c with minor run-time conditionals. v5: Makefile: Use cmd_link_o_target, remove unused clean/distclean targets. v6: Make gpio_config_uart_seaboard() static. v7: Add MAINTAINERS entry for Ventana. Tom Warren doesn't have Ventana, so he asked me to add myself for this board. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
2011-10-31 06:51:37 +00:00
Tom Warren <twarren@nvidia.com>
Stephen Warren <swarren@nvidia.com>
ventana Tegra2 (ARM7 & A9 Dual Core)
tegra2: Add support for Compal Paz00 (Toshiba AC100) The Toshiba AC100 (Compal code-name Paz00, aka Dynabook AZ) is a netbook derived from the NVIDIA Tegra Harmony reference board. It ships with Android, but is often repurposed to run Linux. This patch adds just enough support to get a U-Boot serial console, and the ability access built-in eMMC and the external SD slot. v2: * Rebased on latest HEAD, incorporated changes made to other board files. * Moved board files from board/nvidia to board/compal. * Switched to correct odmdata value. This required add the previous patch to fix U-Boot's interpretation of the odmdata RAM size field. * Removed nvmem= from default Linux kernel command-line; no drivers use the reserved memory yet, so there's no point reserving it. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
2012-01-06 12:14:42 +00:00
paz00 Tegra2 (ARM7 & A9 Dual Core)
tegra2: Add support for Ventana Ventana is a board which is very similar to Seaboard. Support it by re-using board/nvidia/seaboard/seaboard.c with minor run-time conditionals. v5: Makefile: Use cmd_link_o_target, remove unused clean/distclean targets. v6: Make gpio_config_uart_seaboard() static. v7: Add MAINTAINERS entry for Ventana. Tom Warren doesn't have Ventana, so he asked me to add myself for this board. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
2011-10-31 06:51:37 +00:00
OMAP3: Change devkit8000 maintainer Signed-off-by: Thomas Weber <weber@corscience.de>
2011-11-28 04:18:57 +00:00
Thomas Weber <weber@corscience.de>
devkit8000 ARM ARMV7 (OMAP3530 SoC)
OMAP3: Add Corscience Tricorder board Tricorder is a board which is very similar to the Devkit8000. It is designed as a base platform for further medical devices. www.corscience.de/en/medical-engineering/products/multiparameter/mp10-board.html Signed-off-by: Thomas Weber <weber@corscience.de>
2012-01-28 09:25:46 +00:00
tricorder ARM ARMV7 (OMAP3503 SoC)
OMAP3: Change devkit8000 maintainer Signed-off-by: Thomas Weber <weber@corscience.de>
2011-11-28 04:18:57 +00:00
Pantheon: Add Board Support for Marvell dkb board DKB is a Development Board for PANTHEON TD/TTC(pxa920/pxa910) with * Processor upto 806Mhz * LPDDR1/2 * x8/x16 SLC/MLC NAND * Footprints for eMMC & MMC x8 card With Peripherals: * Parallel LCD I/F * Audio codecs (88PM8607) * MIPI CSI-2 camera * Marvell 88W8787 802.11n/BT module * Marvell 2G/3G RF * Dual analog mics & speakers, headset jack, LED, ambient * USB2.0 HS host, OTG (mini AB) * GPIO, GPIO expander with DIP switches for easier selection * UART serial over USB, CIR This patch adds basic board support with DRAM and UART functionality Signed-off-by: Lei Wen <leiwen@marvell.com> Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
2011-02-09 12:47:47 +00:00
Lei Wen <leiwen@marvell.com>
dkb ARM926EJS (PANTHEON 88AP920 SOC)
ARM: Add support for jadecpu board based on MB86R01 SoC This patch adds support for the jadecpu board using the MB86R01 'Jade' SoC from Fujitsu. Signed-off-by: Matthias Weisser <weisserm@arcor.de>
2010-08-09 11:31:51 +00:00
Matthias Weisser <weisserm@arcor.de>
jadecpu ARM926EJS (MB86R01 SoC)
imx: Add support for zmx25 board zmx25 is a board based on imx25 SoC, 64 Megs of LPDDR, 32 Megs of NOR flash, an optional NAND flash. Signed-off-by: Matthias Weisser <weisserm@arcor.de>
2011-07-06 00:28:33 +00:00
zmx25 ARM926EJS (imx25 SoC)
ARM: Add support for jadecpu board based on MB86R01 SoC This patch adds support for the jadecpu board using the MB86R01 'Jade' SoC from Fujitsu. Signed-off-by: Matthias Weisser <weisserm@arcor.de>
2010-08-09 11:31:51 +00:00
Cleanup build problems (on Fedora Core x86_64 build host)
2005-08-03 20:32:02 +00:00
Richard Woodruff <r-woodruff2@ti.com>
Add last known maintainer for orphaned boards; reformat. Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-07-13 12:58:16 +00:00
omap2420h4 ARM1136EJS
Cleanup build problems (on Fedora Core x86_64 build host)
2005-08-03 20:32:02 +00:00
Add board support for hawkboard The patch adds basic board support for TI's OMAP-L138 based Hawkboard. This board is pretty similar to the da850 EVM. Support for nand and network access is added in this version. The following bootup procedure is used. At reset, the Rom Boot Loader(RBL), initialises the ddr and the nand controllers and copies the second stage bootloader(nand_spl) to RAM. The secondary bootloader then copies u-boot from a predefined location in the nand flash to the RAM, and passes control to the u-boot image. Three config options are supported * hawkboard_config - Used to create the u-boot.bin. Tftp the u-boot.bin image to the RAM from u-boot, and flash to the nand flash at address 0xe0000. * hawkboard_nand_config - Used to generate the secondary bootloader(nand_spl) image. This creates an elf file u-boot-spl under nand_spl/. Create an AIS signed image using this file, and flash it to the nand flash at address 0x20000. The ais file should fit in one block. * hawkboard_uart_config - This is same as the first image, but with the TEXT_BASE as expected by the RBL(0xc1080000). Create the AIS Signed-off-by: Sughosh Ganu <urwithsughosh@gmail.com> Signed-off-by: Ben Gardiner <bengardiner@nanometrics.ca> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
2010-11-30 16:25:01 +00:00
Syed Mohammed Khasim <sm.khasim@gmail.com>
Sughosh Ganu <urwithsughosh@gmail.com>
hawkboard ARM926EJS (OMAP-L138)
Remove kharris@nexus-tech.net from MAINTAINERS Mail to kharris@nexus-tech.net bounces because the user doesn't exist anymore. You can't be a maintainer without a valid e-mail address, so move all boards that used to be maintained by Kyle Harris to the "orphaned" list. Currently, only PowerPC has a list of orphaned boards, so this patch creates one for ARM as well. Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-07-10 11:16:04 +00:00
-------------------------------------------------------------------------
Unknown / orphaned boards:
Add last known maintainer for orphaned boards; reformat. Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-07-13 12:58:16 +00:00
Board CPU Last known maintainer / Comment
.........................................................................
add XScale sub architecture (IXP/PXA) to maintainer list Signed-off-by: Michael Schwingen <michael@schwingen.org>
2011-05-22 21:59:57 +00:00
lubbock xscale/pxa Kyle Harris <kharris@nexus-tech.net> / dead address
Add AcTux board support Hi, The patch adds 4 boards, called AcTux-1 .. AcTux-4. This patch contains the files that contain changes for multiple boards, the board-specific files follow as separate patches. Signed-off-by: Michael Schwingen <michael@schwingen.org>
2008-01-17 23:04:28 +00:00
remove myself as a maintainer of several ARM boards Since I haven't been actively maintaining these boards for a long while, keeping myself as their maintainer makes no sense. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
2010-04-14 13:32:06 +00:00
imx31_phycore_eet i.MX31 Guennadi Liakhovetski <g.liakhovetski@gmx.de> / resigned
mx31ads i.MX31 Guennadi Liakhovetski <g.liakhovetski@gmx.de> / resigned
SMDK6400 S3C6400 Guennadi Liakhovetski <g.liakhovetski@gmx.de> / resigned
* Patch by Daniel Engstrm, 13 Nov 2002: Add support for i386 architecture and AMD SC520 board * Patch by Pierre Aubert, 12 Nov 2002: Add support for DOS filesystem and booting from DOS floppy disk
2002-11-18 00:14:45 +00:00
#########################################################################
# x86 Systems: #
# #
# Maintainer Name, Email Address #
Add last known maintainer for orphaned boards; reformat. Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-07-13 12:58:16 +00:00
# Board CPU #
* Patch by Daniel Engstrm, 13 Nov 2002: Add support for i386 architecture and AMD SC520 board * Patch by Pierre Aubert, 12 Nov 2002: Add support for DOS filesystem and booting from DOS floppy disk
2002-11-18 00:14:45 +00:00
#########################################################################
x86: Update MAINTAINERS and delete README files The README files are totally out-of-date to the point where they do more harm than good Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
2011-04-13 09:43:30 +00:00
Graeme Russ <graeme.russ@gmail.com>
* Patch by Daniel Engstrm, 13 Nov 2002: Add support for i386 architecture and AMD SC520 board * Patch by Pierre Aubert, 12 Nov 2002: Add support for DOS filesystem and booting from DOS floppy disk
2002-11-18 00:14:45 +00:00
x86: Update MAINTAINERS and delete README files The README files are totally out-of-date to the point where they do more harm than good Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
2011-04-13 09:43:30 +00:00
eNET AMD SC520
* Patch by Daniel Engstrm, 13 Nov 2002: Add support for i386 architecture and AMD SC520 board * Patch by Pierre Aubert, 12 Nov 2002: Add support for DOS filesystem and booting from DOS floppy disk
2002-11-18 00:14:45 +00:00
* Patch by Robert Schwebel, 21 Jan 2003: - Add support for Innokom board - Don't complain if "install" fails - README cleanup (remove duplicated lines) - Update PXA header files * Add documentation for existing POST code (doc/README.POST) * Patch by Laudney Ren, 15 Jan 2003: Fix handling of redundand environment in "tools/envcrc.c" * Patch by Detlev Zundel, 28 Feb 2003: Add bedbug support for 824x systems * Add support for 16 MB flash configuration of TRAB board * Patch by Erwin Rol, 27 Feb 2003: Add support for RTEMS * Add image information to README * Fix dual PCMCIA slot support (when running with just one slot populated) * Add VFD type detection to trab board * extend drivers/cs8900.c driver to synchronize ethaddr environment variable with value in the EEPROM
2003-03-06 00:02:04 +00:00
#########################################################################
# MIPS Systems: #
# #
# Maintainer Name, Email Address #
Add last known maintainer for orphaned boards; reformat. Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-07-13 12:58:16 +00:00
# Board CPU #
* Patch by Robert Schwebel, 21 Jan 2003: - Add support for Innokom board - Don't complain if "install" fails - README cleanup (remove duplicated lines) - Update PXA header files * Add documentation for existing POST code (doc/README.POST) * Patch by Laudney Ren, 15 Jan 2003: Fix handling of redundand environment in "tools/envcrc.c" * Patch by Detlev Zundel, 28 Feb 2003: Add bedbug support for 824x systems * Add support for 16 MB flash configuration of TRAB board * Patch by Erwin Rol, 27 Feb 2003: Add support for RTEMS * Add image information to README * Fix dual PCMCIA slot support (when running with just one slot populated) * Add VFD type detection to trab board * extend drivers/cs8900.c driver to synchronize ethaddr environment variable with value in the EEPROM
2003-03-06 00:02:04 +00:00
#########################################################################
Wolfgang Denk <wd@denx.de>
Add last known maintainer for orphaned boards; reformat. Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-07-13 12:58:16 +00:00
incaip MIPS32 4Kc
* Patch by Robert Schwebel, 21 Jan 2003: - Add support for Innokom board - Don't complain if "install" fails - README cleanup (remove duplicated lines) - Update PXA header files * Add documentation for existing POST code (doc/README.POST) * Patch by Laudney Ren, 15 Jan 2003: Fix handling of redundand environment in "tools/envcrc.c" * Patch by Detlev Zundel, 28 Feb 2003: Add bedbug support for 824x systems * Add support for 16 MB flash configuration of TRAB board * Patch by Erwin Rol, 27 Feb 2003: Add support for RTEMS * Add image information to README * Fix dual PCMCIA slot support (when running with just one slot populated) * Add VFD type detection to trab board * extend drivers/cs8900.c driver to synchronize ethaddr environment variable with value in the EEPROM
2003-03-06 00:02:04 +00:00
* Patch by Steven Scholz, 10 Oct 2003 - Add support for Altera FPGA ACEX1K * Patches by Thomas Lange, 09 Oct 2003: - Endian swap ATA identity for all big endian CPUs, not just PPC - MIPS only: New option CONFIG_MEMSIZE_IN_BYTES for passing memsize args to linux - add support for dbau1x00 board (MIPS32)
2003-10-09 20:09:04 +00:00
Thomas Lange <thomas@corelatus.se>
Add last known maintainer for orphaned boards; reformat. Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-07-13 12:58:16 +00:00
dbau1x00 MIPS32 Au1000
gth2 MIPS32 Au1000
* Patch by Steven Scholz, 10 Oct 2003 - Add support for Altera FPGA ACEX1K * Patches by Thomas Lange, 09 Oct 2003: - Endian swap ATA identity for all big endian CPUs, not just PPC - MIPS only: New option CONFIG_MEMSIZE_IN_BYTES for passing memsize args to linux - add support for dbau1x00 board (MIPS32)
2003-10-09 20:09:04 +00:00
Mail address change, documentation modified Signed-off-by: Vlad Lungu <vlad.lungu@windrvier.com>
2008-05-05 11:20:03 +00:00
Vlad Lungu <vlad.lungu@windriver.com>
Add last known maintainer for orphaned boards; reformat. Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-07-13 12:58:16 +00:00
qemu_mips MIPS32
MIPS:Target support for qemu -M mips With serial, NE2000, IDE support. Tested in big-endian mode. Memory size hard-coded to 128M for now, so don't play with the -m option. Signed-off-by: Vlad Lungu <vlad@comsys.ro>
2008-01-16 17:27:51 +00:00
MIPS: Add VCT board series support (Part 3/3) Signed-off-by: Stefan Roese <sr@denx.de>
2009-01-21 16:25:01 +00:00
Stefan Roese <sr@denx.de>
vct_xxx MIPS32 4Kc
MIPS: Jz4740: Add qi_lb60 board support Add support for the qi_lb60 (a.k.a QI Ben NanoNote) clamshell device from Qi hardware: http://en.qi-hardware.com/wiki/Ben_NanoNote http://en.qi-hardware.com/wiki/Main_Page http://en.wikipedia.org/wiki/Qi_hardware This Jz4740-based clamshell device does not use NOR flash to boot. The initial bring-up assumes that U-Boot is directly loaded into SDRAM using USB boot tool, and starts from 0x80100000. About USB boot tool ------------------- Jz4740 is one of the XBurst processors with USB boot functionality supported. The CPU can boot from a small ROM in the LSI, initialize CPU and USB module, then wait for USB commands from the USB host. We can send 8 KB binary data to the CPU cache using USB boot tool. USB boot tool is available to the public at Ingenic website. Also there is an alternative Debian package named xburst-tools. Signed-off-by: Xiangfu Liu <xiangfu@openmobilefree.net> Acked-by: Daniel <zpxu@ingenic.cn> Signed-off-by: Shinya Kuribayashi <skuribay@pobox.com>
2011-10-12 04:24:06 +00:00
Xiangfu Liu <xiangfu@openmobilefree.net>
qi_lb60 MIPS32 (XBurst Jz4740 SoC)
* Patch by Scott McNutt, 04 Oct 2003: - add support for Altera Nios-32 CPU - add support for Nios Cyclone Development Kit (DK-1C20) * Patch by Steven Scholz, 29 Sep 2003: - A second parameter for bootm overwrites the load address for "Standalone Application" images. - bootm sets environment variable "filesize" to the resulting (uncompressed) data length for "Standalone Application" images when autostart is set to "no". Now you can do something like if bootm $fpgadata $some_free_ram ; then fpga load 0 $some_free_ram $filesize fi * Patch by Denis Peter, 25 Sept 2003: add support for the MIP405 Rev. C board
2003-10-08 23:26:14 +00:00
#########################################################################
Patches by Scott McNutt, 24 Aug 2004: - Add support for Altera Nios-II processors. - Add support for Psyent PCI-5441 board. - Add support for Psyent PK1C20 board.
2004-10-10 21:27:30 +00:00
# Nios-II Systems: #
# #
# Maintainer Name, Email Address #
Add last known maintainer for orphaned boards; reformat. Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-07-13 12:58:16 +00:00
# Board CPU #
Patches by Scott McNutt, 24 Aug 2004: - Add support for Altera Nios-II processors. - Add support for Psyent PCI-5441 board. - Add support for Psyent PK1C20 board.
2004-10-10 21:27:30 +00:00
#########################################################################
Scott McNutt <smcnutt@psyent.com>
Add last known maintainer for orphaned boards; reformat. Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-07-13 12:58:16 +00:00
PCI5441 Nios-II
PK1C20 Nios-II
nios2: add nios2-generic board This is a generic approach to port u-boot for nios2 boards. You may find the usage of this approach on the nioswiki, http://nioswiki.com/DasUBoot A fpga parameter file, which contains base address information and drivers declaration, is generated from Altera's hardware system description sopc file using tools. The example fpga parameter file is compatible with EP1C20, EP1S10 and EP1S40 boards. So these boards can be removed after this commit. Though epcs controller is removed to cut the dependency of altera_spi driver. Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Signed-off-by: Scott McNutt <smcnutt@psyent.com>
2010-04-21 00:40:59 +00:00
nios2-generic Nios-II
Patches by Scott McNutt, 24 Aug 2004: - Add support for Altera Nios-II processors. - Add support for Psyent PCI-5441 board. - Add support for Psyent PK1C20 board.
2004-10-10 21:27:30 +00:00
Patches by Yasushi Shoji, 29 Jun 2004: - add empty include/asm-microblaze/processor.h - add to CREDITS and MAINTAINERS - add gd initialization - add MicroBlaze and SUZAKU board to MAKEALL script - add reset support for SUZAKU - add flush_cache() for MicroBlaze - add CFG_FLASH_SIZE to include/configs/suzaku.h since we have fixed size flash memory on SUZAKU
2004-07-10 23:48:41 +00:00
#########################################################################
# MicroBlaze Systems: #
# #
# Maintainer Name, Email Address #
Add last known maintainer for orphaned boards; reformat. Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-07-13 12:58:16 +00:00
# Board CPU #
Patches by Yasushi Shoji, 29 Jun 2004: - add empty include/asm-microblaze/processor.h - add to CREDITS and MAINTAINERS - add gd initialization - add MicroBlaze and SUZAKU board to MAKEALL script - add reset support for SUZAKU - add flush_cache() for MicroBlaze - add CFG_FLASH_SIZE to include/configs/suzaku.h since we have fixed size flash memory on SUZAKU
2004-07-10 23:48:41 +00:00
#########################################################################
Support for XUPV2P board Reset support BSP autoconfig support
2007-03-25 23:39:07 +00:00
Michal Simek <monstr@monstr.eu>
microblaze: Rename ml401 to microblaze-generic Signed-off-by: Michal Simek <monstr@monstr.eu>
2008-12-19 12:14:05 +00:00
microblaze-generic MicroBlaze
Support for XUPV2P board Reset support BSP autoconfig support
2007-03-25 23:39:07 +00:00
some new esd boards added
2004-12-16 18:44:40 +00:00
#########################################################################
# Coldfire Systems: #
# #
# Maintainer Name, Email Address #
Add last known maintainer for orphaned boards; reformat. Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-07-13 12:58:16 +00:00
# Board CPU #
some new esd boards added
2004-12-16 18:44:40 +00:00
#########################################################################
MAINTAINERS: sort entries Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-08-10 22:17:52 +00:00
Hayden Fraser <Hayden.Fraser@freescale.com>
M5253EVBE mcf52x2
MAINTAINERS: fix sorting, remove duplicates. Signed-off-by: Wolfgang Denk <wd@denx.de>
2009-07-09 07:56:16 +00:00
Matthias Fuchs <matthias.fuchs@esd-electronics.com>
TASREG MCF5249
ColdFire: Add M54455EVB for MCF5445x Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
2007-08-16 20:05:11 +00:00
TsiChung Liew <Tsi-Chung.Liew@freescale.com>
Add last known maintainer for orphaned boards; reformat. Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-07-13 12:58:16 +00:00
M52277EVB mcf5227x
M5235EVB mcf52x2
ColdFire: Add M5253DEMO platform support for MCF5253 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
2008-07-23 22:11:47 +00:00
M5253DEMO mcf52x2
ColdFire: Add MCF5301x CPU and M53017EVB support Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
2008-10-22 11:38:21 +00:00
M53017EVB mcf532x
Add last known maintainer for orphaned boards; reformat. Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-07-13 12:58:16 +00:00
M5329EVB mcf532x
M5373EVB mcf532x
M54455EVB mcf5445x
M5475EVB mcf547x_8x
M5485EVB mcf547x_8x
ColdFire: Add M54455EVB for MCF5445x Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
2007-08-16 20:05:11 +00:00
add ASTRO MCF5373L board This patch adds support for ASTRO board(s) based on MCF5373L. Signed-off-by: Wolfgang Wegner <w.wegner@astro-kom.de>
2010-01-25 10:27:44 +00:00
Wolfgang Wegner <w.wegner@astro-kom.de>
astro_mcf5373l MCF5373L
Add AVR32 architecture support Patch by Haavard Skinnemoen, 6 Sep 2006 16:23:02 +0200 This patch adds common infrastructure code for the Atmel AVR32 architecture. See doc/README.AVR32 for details. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2006-10-24 12:21:16 +00:00
#########################################################################
# AVR32 Systems: #
# #
# Maintainer Name, Email Address #
Add last known maintainer for orphaned boards; reformat. Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-07-13 12:58:16 +00:00
# Board CPU #
Add AVR32 architecture support Patch by Haavard Skinnemoen, 6 Sep 2006 16:23:02 +0200 This patch adds common infrastructure code for the Atmel AVR32 architecture. See doc/README.AVR32 for details. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2006-10-24 12:21:16 +00:00
#########################################################################
MAINTAINERS: Sort avr32 section alphabetically The rest of the MAINTAINERS file appears to be sorted almost-alphabetically, but entries for the newly added AVR32 boards were added somewhat randomly. This patch sorts the list alphabetically again. Also update my e-mail address. The old one still works, but it may not work forever. Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-08-15 10:04:25 +00:00
Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
avr32: Add MIMC200 board The MIMC200 board is based on Atmel's NGW100 dev kit, but with an extra 8MByte FLASH and 128KByte FRAM. Signed-off-by: Mark Jackson <mpfj@mimc.co.uk> Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-07-30 12:07:27 +00:00
MAINTAINERS: Sort avr32 section alphabetically The rest of the MAINTAINERS file appears to be sorted almost-alphabetically, but entries for the newly added AVR32 boards were added somewhat randomly. This patch sorts the list alphabetically again. Also update my e-mail address. The old one still works, but it may not work forever. Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-08-15 10:04:25 +00:00
FAVR-32-EZKIT AT32AP7000
avr32: Add MIMC200 board The MIMC200 board is based on Atmel's NGW100 dev kit, but with an extra 8MByte FLASH and 128KByte FRAM. Signed-off-by: Mark Jackson <mpfj@mimc.co.uk> Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-07-30 12:07:27 +00:00
MAINTAINERS: Sort avr32 section alphabetically The rest of the MAINTAINERS file appears to be sorted almost-alphabetically, but entries for the newly added AVR32 boards were added somewhat randomly. This patch sorts the list alphabetically again. Also update my e-mail address. The old one still works, but it may not work forever. Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-08-15 10:04:25 +00:00
Mark Jackson <mpfj@mimc.co.uk>
Add ATSTK1000 and ATSTK1002 board support Patch by Haavard Skinnemoen, 06 Sep 2006 This patch adds support for the ATSTK1000 with the ATSTK1002 CPU daughterboard. ATSTK1000 is a full-featured development board for AT32AP CPUs. It has two ethernet ports, a high quality QVGA LCD panel, a loudspeaker, and connectors for USART, PS/2, VGA, USB, MMC/SD cards and CompactFlash cards. For more information, please see this page: http://www.atmel.com/dyn/products/tools.asp?family_id=682 The ATSTK1002 is a daughterboard for the ATSTK1000 supporting the AT32AP7000 chip. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2006-10-24 12:42:37 +00:00
MAINTAINERS: Sort avr32 section alphabetically The rest of the MAINTAINERS file appears to be sorted almost-alphabetically, but entries for the newly added AVR32 boards were added somewhat randomly. This patch sorts the list alphabetically again. Also update my e-mail address. The old one still works, but it may not work forever. Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-08-15 10:04:25 +00:00
MIMC200 AT32AP7000
Fix coding style issues; update CHANGELOG. Signed-off-by: Wolfgang Denk <wd@denx.de>
2007-12-27 00:52:50 +00:00
Add support for the hammerhead (AVR32) board The Hammerhead platform is built around a AVR32 32-bit microcontroller from Atmel. It offers versatile peripherals, such as ethernet, usb device, usb host etc. The board also incooperates a power supply and is a Power over Ethernet (PoE) Powered Device (PD). Additonally, a Cyclone III FPGA from Altera is integrated on the board. The FPGA is mapped into the 32-bit AVR memory bus. The FPGA offers two DDR2 SDRAM interfaces, which will cover even the most exceptional need of memory bandwidth. Together with the onboard video decoder the board is ready for video processing. For more information see: http:///www.miromico.com/hammerhead Signed-off-by: Julien May <mailinglist@miromico.ch> [haavard.skinnemoen@atmel.com: various small fixes and adaptions] Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-06-23 11:57:52 +00:00
Alex Raimondi <alex.raimondi@miromico.ch>
Julien May <julien.may@miromico.ch>
HAMMERHEAD AT32AP7000
MAINTAINERS: Sort avr32 section alphabetically The rest of the MAINTAINERS file appears to be sorted almost-alphabetically, but entries for the newly added AVR32 boards were added somewhat randomly. This patch sorts the list alphabetically again. Also update my e-mail address. The old one still works, but it may not work forever. Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-08-15 10:04:25 +00:00
Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Add ATSTK1000 and ATSTK1002 board support Patch by Haavard Skinnemoen, 06 Sep 2006 This patch adds support for the ATSTK1000 with the ATSTK1002 CPU daughterboard. ATSTK1000 is a full-featured development board for AT32AP CPUs. It has two ethernet ports, a high quality QVGA LCD panel, a loudspeaker, and connectors for USART, PS/2, VGA, USB, MMC/SD cards and CompactFlash cards. For more information, please see this page: http://www.atmel.com/dyn/products/tools.asp?family_id=682 The ATSTK1002 is a daughterboard for the ATSTK1000 supporting the AT32AP7000 chip. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2006-10-24 12:42:37 +00:00
Add last known maintainer for orphaned boards; reformat. Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-07-13 12:58:16 +00:00
ATSTK1000 AT32AP7xxx
ATSTK1002 AT32AP7000
ATSTK1003 AT32AP7001
ATSTK1004 AT32AP7002
ATSTK1006 AT32AP7000
ATNGW100 AT32AP7000
Fix coding style issues; update CHANGELOG. Signed-off-by: Wolfgang Denk <wd@denx.de>
2007-12-27 00:52:50 +00:00
sh: Add SuperH boards maintainer to MAINTAINERS file Add MS7750SE and MS7722SE's board maintainer to MAINTAINERS file. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2007-11-28 16:21:54 +00:00
#########################################################################
# SuperH Systems: #
# #
# Maintainer Name, Email Address #
Add last known maintainer for orphaned boards; reformat. Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-07-13 12:58:16 +00:00
# Board CPU #
sh: Add SuperH boards maintainer to MAINTAINERS file Add MS7750SE and MS7722SE's board maintainer to MAINTAINERS file. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2007-11-28 16:21:54 +00:00
#########################################################################
MAINTAINERS: sort entries Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-08-10 22:17:52 +00:00
Yusuke Goda <goda.yusuke@renesas.com>
MIGO-R SH7722
sh: Add maintainer of R7780MP to MAINTAINER file Update MAINTAINER entry for R7780MP. And fix maintainer's name. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2008-03-12 08:55:15 +00:00
Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
sh: Renesas RSK+ 7203 board support This adds initial support for the RTE RSK+ SH7203 board. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2008-08-31 14:02:04 +00:00
<iwamatsu.nobuhiro@renesas.com>
sh: Add SuperH boards maintainer to MAINTAINERS file Add MS7750SE and MS7722SE's board maintainer to MAINTAINERS file. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2007-11-28 16:21:54 +00:00
Add last known maintainer for orphaned boards; reformat. Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-07-13 12:58:16 +00:00
MS7750SE SH7750
MS7722SE SH7722
R7780MP SH7780
R2DPlus SH7751R
SH7763RDP SH7763
sh: Renesas RSK+ 7203 board support This adds initial support for the RTE RSK+ SH7203 board. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2008-08-31 14:02:04 +00:00
RSK7203 SH7203
sh: Renesas Solutions AP325RXA board support AP325RXA is SH7723's reference board. This has SCIF, NOR Flash, Ethernet, USB host, LCDC, SD Host, Camera and other. In this patch, support SCIF, NOR Flash, and Ethernet. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2008-08-22 08:39:09 +00:00
AP325RXA SH7723
sh: Add support shmin board This adds support for the SHMIN SH7706 board(T-SH7706LAN). The CPU of this board is SH7706. There are SDRAM of 32M byte, Flash memory of 512K byte, Serial, 10Base Ether and MMC. http://web.kyoto-inet.or.jp/people/takagaki/T-SH7706/T-SH7706.htm Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2010-10-24 18:12:24 +00:00
SHMIN SH7706
sh: Add support for ecovec board The ecovec board has SH7724, 256MB DDR2-SDRAM, USB, Ethernet, and more. This patch supports the following functions: - 256MB DDR2-SDRAM - USB - I2C - Ethernet Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2011-11-15 03:29:06 +00:00
ECOVEC SH7724
Add ATSTK1000 and ATSTK1002 board support Patch by Haavard Skinnemoen, 06 Sep 2006 This patch adds support for the ATSTK1000 with the ATSTK1002 CPU daughterboard. ATSTK1000 is a full-featured development board for AT32AP CPUs. It has two ethernet ports, a high quality QVGA LCD panel, a loudspeaker, and connectors for USART, PS/2, VGA, USB, MMC/SD cards and CompactFlash cards. For more information, please see this page: http://www.atmel.com/dyn/products/tools.asp?family_id=682 The ATSTK1002 is a daughterboard for the ATSTK1000 supporting the AT32AP7000 chip. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2006-10-24 12:42:37 +00:00
sh: Added support for SH7720 based board MPR2. Signed-off-by: Mark Jonas <mark.jonas@de.bosch.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2008-03-10 10:37:10 +00:00
Mark Jonas <mark.jonas@de.bosch.com>
Add last known maintainer for orphaned boards; reformat. Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-07-13 12:58:16 +00:00
mpr2 SH7720
Add ATSTK1000 and ATSTK1002 board support Patch by Haavard Skinnemoen, 06 Sep 2006 This patch adds support for the ATSTK1000 with the ATSTK1002 CPU daughterboard. ATSTK1000 is a full-featured development board for AT32AP CPUs. It has two ethernet ports, a high quality QVGA LCD panel, a loudspeaker, and connectors for USART, PS/2, VGA, USB, MMC/SD cards and CompactFlash cards. For more information, please see this page: http://www.atmel.com/dyn/products/tools.asp?family_id=682 The ATSTK1002 is a daughterboard for the ATSTK1000 supporting the AT32AP7000 chip. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2006-10-24 12:42:37 +00:00
change email address in MAINTAINERS Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
2011-02-02 01:05:39 +00:00
Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
sh: Add maintainer of MS7720SE to the MAINTAINER file Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2008-01-09 05:42:27 +00:00
Add last known maintainer for orphaned boards; reformat. Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-07-13 12:58:16 +00:00
MS7720SE SH7720
sh: add support for sh7757lcr board The R0P7757LC0030RL board has SH7757, 256MB DDR3-SDRAM, SPI ROM, Ethernet, and more. This patch supports the following functions: - 256MB DDR3-SDRAM - SPI ROM - Ethernet Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2011-02-02 01:05:36 +00:00
R0P77570030RL SH7757
sh: Renesas R0P7785LC0011RL board support This board has SH7785, 512MB DDR2-SDRAM, NOR Flash, Graphic, Ethernet, USB, SD, RTC, and I2C controller. This patch supports the following functions: - 128MB DDR2-SDRAM (29-bit address mode only) - NOR Flash - USB host - Ethernet Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2008-08-31 13:45:08 +00:00
R0P77850011RL SH7785
Blackfin: update MAINTAINERS list Add maintainer information for the Blackfin boards. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2008-02-18 10:37:51 +00:00
#########################################################################
# Blackfin Systems: #
# #
# Maintainer Name, Email Address #
Add last known maintainer for orphaned boards; reformat. Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-07-13 12:58:16 +00:00
# Board CPU #
Blackfin: update MAINTAINERS list Add maintainer information for the Blackfin boards. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2008-02-18 10:37:51 +00:00
#########################################################################
Mike Frysinger <vapier@gentoo.org>
Blackfin Team <u-boot-devel@blackfin.uclinux.org>
Blackfin: bf506f-ezkit: new board port Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-12-17 20:28:43 +00:00
BF506F-EZKIT BF506
Blackfin: bf518f-ezbrd: new board port Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2008-10-13 01:32:52 +00:00
BF518F-EZBRD BF518
Blackfin: bf526-ezbrd: new board port Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2008-10-13 01:30:48 +00:00
BF526-EZBRD BF526
MAINTAINERS: sort Blackfin entries Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-12-19 22:14:14 +00:00
BF527-AD7160-EVAL BF527
Blackfin: bf527-ezkit: new board port Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2008-10-13 00:59:12 +00:00
BF527-EZKIT BF527
Blackfin: add support for BF527-EZKIT v2.1 The new board revision has a different LCD. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-12-10 09:19:21 +00:00
BF527-EZKIT-V2 BF527
Blackfin: bf527-sdp: new board port Support for the Blackfin System Development Platform (SDP) base module. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-09-19 20:28:40 +00:00
BF527-SDP BF527
Add last known maintainer for orphaned boards; reformat. Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-07-13 12:58:16 +00:00
BF533-EZKIT BF533
BF533-STAMP BF533
Blackfin: bf537-pnav: new board port Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2008-10-13 03:08:03 +00:00
BF537-PNAV BF537
Add last known maintainer for orphaned boards; reformat. Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-07-13 12:58:16 +00:00
BF537-STAMP BF537
Blackfin: bf538f-ezkit: new board port Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2008-10-13 01:25:33 +00:00
BF538F-EZKIT BF538
Blackfin: bf548-ezkit: new board port Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2008-10-12 09:05:42 +00:00
BF548-EZKIT BF548
Add last known maintainer for orphaned boards; reformat. Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-07-13 12:58:16 +00:00
BF561-EZKIT BF561
Blackfin: update MAINTAINERS list Add maintainer information for the Blackfin boards. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2008-02-18 10:37:51 +00:00
Blackfin: dnp5370: new board port Info about the hardware can be found here: http://www.dilnetpc.com/dnp0086.htm Signed-off-by: Andreas Schallenberg <Andreas.Schallenberg@3alitydigital.de> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-11-17 18:51:33 +00:00
M.Hasewinkel (MHA) <info@ssv-embedded.de>
dnp5370 BF537
MAINTAINERS: sort Blackfin entries Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-12-19 22:14:14 +00:00
Brent Kandetzki <brentk@teleco.com>
Blackfin: bf527-ad7160-eval: new board support Support the new AD7160 eval board. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-05-31 14:11:53 +00:00
MAINTAINERS: sort Blackfin entries Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-12-19 22:14:14 +00:00
IP04 BF532
Blackfin: cm-bf533: new board port Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2008-10-13 01:36:22 +00:00
MAINTAINERS: sort Blackfin entries Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-12-19 22:14:14 +00:00
Peter Meerwald <devel@bct-electronic.com>
Blackfin: cm-bf533: new board port Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2008-10-13 01:36:22 +00:00
MAINTAINERS: sort Blackfin entries Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-12-19 22:14:14 +00:00
bct-brettl2 BF536
Blackfin: bf537-minotaur: new board port Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2008-10-13 03:16:52 +00:00
MAINTAINERS: sort Blackfin entries Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-12-19 22:14:14 +00:00
I-SYST Micromodule <support@i-syst.com>
IBF-DSP561 BF561
Blackfin: bf537-minotaur: new board port Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2008-10-13 03:16:52 +00:00
Blackfin: blackstamp: new board port Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2008-10-13 03:28:33 +00:00
Wojtek Skulski <skulski@pas.rochester.edu>
Blackfin: blackvme: new board port The board includes: * ADSP-BF561 rev. 0.5 * 32-bit SDRAM (2 * MT48LC16M16A2TG or MT48LC32M16A2TG) * Gigabit Ether AX88180 (ASIX) + 88E1111 rev. B2 (Marvell) * SPI boot flash on PF2 (M25P64 8MB, or M25P128 16 MB) * FPGA boot flash on PF3 (M25P64 8MB, or M25P128 16 MB) * Spartan6-LX150 (memory-mapped; both PPIs also connected) * See http://www.skutek.com/ Signed-off-by: Wojtek Skulski <skulski@pas.rochester.edu> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-09-27 22:21:59 +00:00
Wojtek Skulski <info@skutek.com>
Blackfin: blackstamp: new board port Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2008-10-13 03:28:33 +00:00
Benjamin Matthews <mben12@gmail.com>
Blackfin: blackvme: new board port The board includes: * ADSP-BF561 rev. 0.5 * 32-bit SDRAM (2 * MT48LC16M16A2TG or MT48LC32M16A2TG) * Gigabit Ether AX88180 (ASIX) + 88E1111 rev. B2 (Marvell) * SPI boot flash on PF2 (M25P64 8MB, or M25P128 16 MB) * FPGA boot flash on PF3 (M25P64 8MB, or M25P128 16 MB) * Spartan6-LX150 (memory-mapped; both PPIs also connected) * See http://www.skutek.com/ Signed-off-by: Wojtek Skulski <skulski@pas.rochester.edu> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-09-27 22:21:59 +00:00
BlackStamp BF533
BlackVME BF561
Blackfin: blackstamp: new board port Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2008-10-13 03:28:33 +00:00
MAINTAINERS: sort Blackfin entries Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-12-19 22:14:14 +00:00
Martin Strubel <strubel@section5.ch>
Blackfin: ibf-dsp561: new board port Signed-off-by: Hoan Hoang <hnhoan@i-syst.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-01-19 03:44:17 +00:00
MAINTAINERS: sort Blackfin entries Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-12-19 22:14:14 +00:00
BF537-minotaur BF537
BF537-srv1 BF537
Bluetechnix Tinyboards <bluetechnix@blackfin.uclinux.org>
CM-BF527 BF527
CM-BF533 BF533
CM-BF537E BF537
CM-BF537U BF537
CM-BF548 BF548
CM-BF561 BF561
TCM-BF518 BF518
TCM-BF537 BF537
Blackfin: ibf-dsp561: new board port Signed-off-by: Hoan Hoang <hnhoan@i-syst.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-01-19 03:44:17 +00:00
Blackfin: bf561-acvilon: new board port Signed-off-by: Valentin Yakovenkov <yakovenkov@niistt.ru> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-10-26 22:43:04 +00:00
Valentin Yakovenkov <yakovenkov@niistt.ru>
Anton Shurpin <shurpin.aa@niistt.ru>
BF561-ACVILON BF561
Blackfin: bf525-ucr2: new board port Signed-off-by: Chong Huang <chuang@ucrobotics.com> Signed-off-by: Haitao Zhang <minipanda@linuxrobot.org> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-11-30 08:36:23 +00:00
Haitao Zhang <hzhang@ucrobotics.com>
Chong Huang <chuang@ucrobotics.com>
bf525-ucr2 BF525
adp-ag101: add board adp-ag101 support Add evaluation board "adp-ag101" configuration file adp-ag101.h. Add adp-ag101.c board config and related settings. Add board adp-ag101 into boards.cfg Signed-off-by: Macpaul Lin <macpaul@andestech.com>
2011-10-19 20:41:10 +00:00
#########################################################################
# NDS32 Systems: #
# #
# Maintainer Name, Email Address #
# Board CPU #
#########################################################################
Macpaul Lin <macpaul@andestech.com>
ADP-AG101 N1213 (AG101 SoC)
adp-ag101p: add product into MAINTAINERS list Add ADP-AG101P into MAINTAINERS list. Add ADP-AG101P into boards.cfg. Signed-off-by: Macpaul Lin <macpaul@andestech.com>
2010-10-19 09:10:34 +00:00
ADP-AG101P N1213 (AG101P XC5 FPGA)
adp-ag101: add board adp-ag101 support Add evaluation board "adp-ag101" configuration file adp-ag101.h. Add adp-ag101.c board config and related settings. Add board adp-ag101 into boards.cfg Signed-off-by: Macpaul Lin <macpaul@andestech.com>
2011-10-19 20:41:10 +00:00
openrisc: Add MAINTAINERS entry Signed-off-by: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
2011-11-18 19:21:38 +00:00
#########################################################################
# OpenRISC Systems: #
# #
# Maintainer Name, Email Address #
# Board CPU #
#########################################################################
Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
openrisc-generic OpenRISC
Initial revision
2002-11-02 22:58:18 +00:00
#########################################################################
# End of MAINTAINERS list #
#########################################################################
Reference in New Issue Copy Permalink