kirkwood: add support for D-Link DNS-325
This patch adds support for D-Link DNS-325 ShareCenter NAS. Signed-off-by: Stefan Herbrechtsmeier <stefan@code.herbrechtsmeier.net> Cc: prafulla@marvell.com Cc: albert.u.boot@aribaud.net
This commit is contained in:
Stefan
Albert ARIBAUD
parent
679530278d
commit
bfacf4667a
@ -677,6 +677,10 @@ Kshitij Gupta <kshitij@ti.com>
|
||||
omap1510inn ARM925T
|
||||
omap1610inn ARM926EJS
|
||||
|
||||
Stefan Herbrechtsmeier <stefan@code.herbrechtsmeier.net>
|
||||
|
||||
dns325 ARM926EJS (Kirkwood SoC)
|
||||
|
||||
Vaibhav Hiremath <hvaibhav@ti.com>
|
||||
|
||||
am3517_evm ARM ARMV7 (AM35x SoC)
|
||||
|
||||
49
board/d-link/dns325/Makefile
Normal file
49
board/d-link/dns325/Makefile
Normal file
@ -0,0 +1,49 @@
|
||||
#
|
||||
# Copyright (C) 2011
|
||||
# Stefan Herbrechtsmeier <stefan@code.herbrechtsmeier.net>
|
||||
#
|
||||
# Based on Kirkwood support:
|
||||
# (C) Copyright 2009
|
||||
# Marvell Semiconductor <www.marvell.com>
|
||||
# Written-by: Prafulla Wadaskar <prafulla@marvell.com>
|
||||
#
|
||||
# See file CREDITS for list of people who contributed to this
|
||||
# project.
|
||||
#
|
||||
# This program is free software; you can redistribute it and/or
|
||||
# modify it under the terms of the GNU General Public License as
|
||||
# published by the Free Software Foundation; either version 2 of
|
||||
# the License, or (at your option) any later version.
|
||||
#
|
||||
# This program is distributed in the hope that it will be useful,
|
||||
# but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
# GNU General Public License for more details.
|
||||
#
|
||||
# You should have received a copy of the GNU General Public License
|
||||
# along with this program; if not, write to the Free Software
|
||||
# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
|
||||
# MA 02110-1301 USA
|
||||
#
|
||||
|
||||
include $(TOPDIR)/config.mk
|
||||
|
||||
LIB = $(obj)lib$(BOARD).o
|
||||
|
||||
COBJS := dns325.o
|
||||
|
||||
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
|
||||
OBJS := $(addprefix $(obj),$(COBJS))
|
||||
SOBJS := $(addprefix $(obj),$(SOBJS))
|
||||
|
||||
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
|
||||
$(call cmd_link_o_target, $(OBJS) $(SOBJS))
|
||||
|
||||
#########################################################################
|
||||
|
||||
# defines $(obj).depend target
|
||||
include $(SRCTREE)/rules.mk
|
||||
|
||||
sinclude $(obj).depend
|
||||
|
||||
#########################################################################
|
||||
148
board/d-link/dns325/dns325.c
Normal file
148
board/d-link/dns325/dns325.c
Normal file
@ -0,0 +1,148 @@
|
||||
/*
|
||||
* Copyright (C) 2011
|
||||
* Stefan Herbrechtsmeier <stefan@code.herbrechtsmeier.net>
|
||||
*
|
||||
* Based on Kirkwood support:
|
||||
* (C) Copyright 2009
|
||||
* Marvell Semiconductor <www.marvell.com>
|
||||
* Written-by: Prafulla Wadaskar <prafulla@marvell.com>
|
||||
*
|
||||
* See file CREDITS for list of people who contributed to this
|
||||
* project.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License as
|
||||
* published by the Free Software Foundation; either version 2 of
|
||||
* the License, or (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
|
||||
* MA 02110-1301 USA
|
||||
*/
|
||||
|
||||
#include <common.h>
|
||||
#include <miiphy.h>
|
||||
#include <netdev.h>
|
||||
#include <asm/arch/cpu.h>
|
||||
#include <asm/arch/kirkwood.h>
|
||||
#include <asm/arch/mpp.h>
|
||||
#include <asm/arch/gpio.h>
|
||||
#include "dns325.h"
|
||||
|
||||
DECLARE_GLOBAL_DATA_PTR;
|
||||
|
||||
int board_early_init_f(void)
|
||||
{
|
||||
/* Gpio configuration */
|
||||
kw_config_gpio(DNS325_OE_VAL_LOW, DNS325_OE_VAL_HIGH,
|
||||
DNS325_OE_LOW, DNS325_OE_HIGH);
|
||||
|
||||
/* Multi-Purpose Pins Functionality configuration */
|
||||
u32 kwmpp_config[] = {
|
||||
MPP0_NF_IO2,
|
||||
MPP1_NF_IO3,
|
||||
MPP2_NF_IO4,
|
||||
MPP3_NF_IO5,
|
||||
MPP4_NF_IO6,
|
||||
MPP5_NF_IO7,
|
||||
MPP6_SYSRST_OUTn,
|
||||
MPP7_GPO,
|
||||
MPP8_TW_SDA,
|
||||
MPP9_TW_SCK,
|
||||
MPP10_UART0_TXD,
|
||||
MPP11_UART0_RXD,
|
||||
MPP12_SD_CLK,
|
||||
MPP13_SD_CMD,
|
||||
MPP14_SD_D0,
|
||||
MPP15_SD_D1,
|
||||
MPP16_SD_D2,
|
||||
MPP17_SD_D3,
|
||||
MPP18_NF_IO0,
|
||||
MPP19_NF_IO1,
|
||||
MPP20_SATA1_ACTn, /* sata1(left) status led */
|
||||
MPP21_SATA0_ACTn, /* sata0(right) status led */
|
||||
MPP22_GPIO,
|
||||
MPP23_GPIO,
|
||||
MPP24_GPIO, /* power off out */
|
||||
MPP25_GPIO,
|
||||
MPP26_GPIO, /* power led */
|
||||
MPP27_GPIO, /* sata0(right) error led */
|
||||
MPP28_GPIO, /* sata1(left) error led */
|
||||
MPP29_GPIO, /* usb error led */
|
||||
MPP30_GPIO,
|
||||
MPP31_GPIO,
|
||||
MPP32_GPIO,
|
||||
MPP33_GPIO,
|
||||
MPP34_GPIO, /* power key */
|
||||
MPP35_GPIO,
|
||||
MPP36_GPIO,
|
||||
MPP37_GPIO,
|
||||
MPP38_GPIO,
|
||||
MPP39_GPIO, /* enable sata 0 */
|
||||
MPP40_GPIO, /* enable sata 1 */
|
||||
MPP41_GPIO, /* hdd0 present */
|
||||
MPP42_GPIO, /* hdd1 present */
|
||||
MPP43_GPIO, /* usb status led */
|
||||
MPP44_GPIO, /* fan status */
|
||||
MPP45_GPIO, /* fan high speed */
|
||||
MPP46_GPIO, /* fan low speed */
|
||||
MPP47_GPIO, /* usb umount */
|
||||
MPP48_GPIO, /* factory reset */
|
||||
MPP49_GPIO, /* thermal sensor */
|
||||
0
|
||||
};
|
||||
kirkwood_mpp_conf(kwmpp_config);
|
||||
|
||||
kw_gpio_set_blink(DNS325_GPIO_LED_POWER , 1);
|
||||
|
||||
kw_gpio_set_value(DNS325_GPIO_SATA0_EN , 1);
|
||||
return 0;
|
||||
}
|
||||
|
||||
int board_init(void)
|
||||
{
|
||||
/* Boot parameters address */
|
||||
gd->bd->bi_boot_params = kw_sdram_bar(0) + 0x100;
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
#ifdef CONFIG_RESET_PHY_R
|
||||
/* Configure and initialize PHY */
|
||||
void reset_phy(void)
|
||||
{
|
||||
u16 reg;
|
||||
u16 devadr;
|
||||
char *name = "egiga0";
|
||||
|
||||
if (miiphy_set_current_dev(name))
|
||||
return;
|
||||
|
||||
/* command to read PHY dev address */
|
||||
if (miiphy_read(name, 0xEE, 0xEE, (u16 *) &devadr)) {
|
||||
printf("Err..(%s) could not read PHY dev address\n", __func__);
|
||||
return;
|
||||
}
|
||||
|
||||
/*
|
||||
* Enable RGMII delay on Tx and Rx for CPU port
|
||||
* Ref: sec 4.7.2 of chip datasheet
|
||||
*/
|
||||
miiphy_write(name, devadr, MV88E1116_PGADR_REG, 2);
|
||||
miiphy_read(name, devadr, MV88E1116_MAC_CTRL_REG, ®);
|
||||
reg |= (MV88E1116_RGMII_RXTM_CTRL | MV88E1116_RGMII_TXTM_CTRL);
|
||||
miiphy_write(name, devadr, MV88E1116_MAC_CTRL_REG, reg);
|
||||
miiphy_write(name, devadr, MV88E1116_PGADR_REG, 0);
|
||||
|
||||
/* reset the phy */
|
||||
miiphy_reset(name, devadr);
|
||||
|
||||
debug("88E1116 Initialized on %s\n", name);
|
||||
}
|
||||
#endif /* CONFIG_RESET_PHY_R */
|
||||
48
board/d-link/dns325/dns325.h
Normal file
48
board/d-link/dns325/dns325.h
Normal file
@ -0,0 +1,48 @@
|
||||
/*
|
||||
* Copyright (C) 2011
|
||||
* Stefan Herbrechtsmeier <stefan@code.herbrechtsmeier.net>
|
||||
*
|
||||
* Based on Kirkwood support:
|
||||
* (C) Copyright 2009
|
||||
* Marvell Semiconductor <www.marvell.com>
|
||||
* Written-by: Prafulla Wadaskar <prafulla@marvell.com>
|
||||
*
|
||||
* See file CREDITS for list of people who contributed to this
|
||||
* project.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License as
|
||||
* published by the Free Software Foundation; either version 2 of
|
||||
* the License, or (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
|
||||
* MA 02110-1301 USA
|
||||
*/
|
||||
|
||||
#ifndef __DNS325_H
|
||||
#define __DNS325_H
|
||||
|
||||
/* GPIO configuration */
|
||||
#define DNS325_OE_LOW 0x00000000
|
||||
#define DNS325_OE_HIGH 0x00039604
|
||||
#define DNS325_OE_VAL_LOW 0x38000000 /* disable leds */
|
||||
#define DNS325_OE_VAL_HIGH 0x00000800 /* disable leds */
|
||||
|
||||
#define DNS325_GPIO_LED_POWER 26
|
||||
#define DNS325_GPIO_SATA0_EN 39
|
||||
#define DNS325_GPIO_SATA1_EN 40
|
||||
|
||||
/* PHY related */
|
||||
#define MV88E1116_MAC_CTRL_REG 21
|
||||
#define MV88E1116_PGADR_REG 22
|
||||
#define MV88E1116_RGMII_TXTM_CTRL (1 << 4)
|
||||
#define MV88E1116_RGMII_RXTM_CTRL (1 << 5)
|
||||
|
||||
#endif /* __DNS325_H */
|
||||
208
board/d-link/dns325/kwbimage.cfg
Normal file
208
board/d-link/dns325/kwbimage.cfg
Normal file
@ -0,0 +1,208 @@
|
||||
#
|
||||
# Copyright (C) 2011
|
||||
# Stefan Herbrechtsmeier <stefan@code.herbrechtsmeier.net>
|
||||
#
|
||||
# Based on Kirkwood support:
|
||||
# (C) Copyright 2009
|
||||
# Marvell Semiconductor <www.marvell.com>
|
||||
# Written-by: Prafulla Wadaskar <prafulla@marvell.com>
|
||||
#
|
||||
# See file CREDITS for list of people who contributed to this
|
||||
# project.
|
||||
#
|
||||
# This program is free software; you can redistribute it and/or
|
||||
# modify it under the terms of the GNU General Public License as
|
||||
# published by the Free Software Foundation; either version 2 of
|
||||
# the License, or (at your option) any later version.
|
||||
#
|
||||
# This program is distributed in the hope that it will be useful,
|
||||
# but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
# GNU General Public License for more details.
|
||||
#
|
||||
# You should have received a copy of the GNU General Public License
|
||||
# along with this program; if not, write to the Free Software
|
||||
# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
|
||||
# MA 02110-1301 USA
|
||||
#
|
||||
# Refer docs/README.kwimage for more details about how-to configure
|
||||
# and create kirkwood boot image
|
||||
#
|
||||
|
||||
# Boot Media configurations
|
||||
BOOT_FROM nand
|
||||
NAND_ECC_MODE default
|
||||
NAND_PAGE_SIZE 0x0800
|
||||
|
||||
# SOC registers configuration using bootrom header extension
|
||||
# Maximum KWBIMAGE_MAX_CONFIG configurations allowed
|
||||
|
||||
# Configure RGMII-0 interface pad voltage to 1.8V
|
||||
DATA 0xFFD100e0 0x1b1b1b9b
|
||||
|
||||
#Dram initalization for SINGLE x16 CL=5 @ 400MHz
|
||||
DATA 0xFFD01400 0x43000c30 # DDR Configuration register
|
||||
# bit13-0: 0xc30, 3120 DDR2 clks refresh rate
|
||||
# bit23-14: 0 required
|
||||
# bit24: 1, enable exit self refresh mode on DDR access
|
||||
# bit25: 1 required
|
||||
# bit29-26: 0 required
|
||||
# bit31-30: 0b01 required
|
||||
|
||||
DATA 0xFFD01404 0x39543000 # DDR Controller Control Low
|
||||
# bit3-0: 0 required
|
||||
# bit4: 0, addr/cmd in smame cycle
|
||||
# bit5: 0, clk is driven during self refresh, we don't care for APX
|
||||
# bit6: 0, use recommended falling edge of clk for addr/cmd
|
||||
# bit11-7: 0 required
|
||||
# bit12: 1 required
|
||||
# bit13: 1 required
|
||||
# bit14: 0, input buffer always powered up
|
||||
# bit17-15: 0 required
|
||||
# bit18: 1, cpu lock transaction enabled
|
||||
# bit19: 0 required
|
||||
# bit23-20: 5, recommended value for CL=5 and STARTBURST_DEL disabled bit31=0
|
||||
# bit27-24: 9, CL+4, STARTBURST sample stages, for freqs 400MHz, unbuffered DIMM
|
||||
# bit30-28: 3 required
|
||||
# bit31: 0, no additional STARTBURST delay
|
||||
|
||||
DATA 0xFFD01408 0x22125451 # DDR Timing (Low)
|
||||
# bit3-0: 1, 18 cycle tRAS (tRAS[3-0])
|
||||
# bit7-4: 5, 6 cycle tRCD
|
||||
# bit11-8: 4, 5 cyle tRP
|
||||
# bit15-12: 5, 6 cyle tWR
|
||||
# bit19-16: 2, 3 cyle tWTR
|
||||
# bit20: 1, 18 cycle tRAS (tRAS[4])
|
||||
# bit23-21: 0 required
|
||||
# bit27-24: 2, 3 cycle tRRD
|
||||
# bit31-28: 2, 3 cyle tRTP
|
||||
|
||||
DATA 0xFFD0140C 0x00000833 # DDR Timing (High)
|
||||
# bit6-0: 0x33, 33 cycle tRFC
|
||||
# bit8-7: 0, 1 cycle tR2R
|
||||
# bit10-9: 0, 1 cyle tR2W
|
||||
# bit12-11: 1, 2 cylce tW2W
|
||||
# bit31-13: 0 required
|
||||
|
||||
DATA 0xFFD01410 0x0000000c # DDR Address Control
|
||||
# bit1-0: 0, Cs0width=x8
|
||||
# bit3-2: 3, Cs0size=1Gb
|
||||
# bit5-4: 0, Cs1width=nonexistent
|
||||
# bit7-6: 0, Cs1size=nonexistent
|
||||
# bit9-8: 0, Cs2width=nonexistent
|
||||
# bit11-10: 0, Cs2size=nonexistent
|
||||
# bit13-12: 0, Cs3width=nonexistent
|
||||
# bit15-14: 0, Cs3size=nonexistent
|
||||
# bit16: 0, Cs0AddrSel
|
||||
# bit17: 0, Cs1AddrSel
|
||||
# bit18: 0, Cs2AddrSel
|
||||
# bit19: 0, Cs3AddrSel
|
||||
# bit31-20: 0 required
|
||||
|
||||
DATA 0xFFD01414 0x00000000 # DDR Open Pages Control
|
||||
# bit0: 0, OPEn=OpenPage enabled
|
||||
# bit31-1: 0 required
|
||||
|
||||
DATA 0xFFD01418 0x00000000 # DDR Operation
|
||||
# bit3-0: 0, Cmd=Normal SDRAM Mode
|
||||
# bit31-4: 0 required
|
||||
|
||||
DATA 0xFFD0141C 0x00000C52 # DDR Mode
|
||||
# bit2-0: 2, Burst Length (2 required)
|
||||
# bit3: 0, Burst Type (0 required)
|
||||
# bit6-4: 5, CAS Latency (CL) 5
|
||||
# bit7: 0, (Test Mode) Normal operation
|
||||
# bit8: 0, (Reset DLL) Normal operation
|
||||
# bit11-9: 0, Write recovery for auto-precharge (3 required ??)
|
||||
# bit12: 0, Fast Active power down exit time (0 required)
|
||||
# bit31-13: 0 required
|
||||
|
||||
DATA 0xFFD01420 0x00000040 # DDR Extended Mode
|
||||
# bit0: 0, DRAM DLL enabled
|
||||
# bit1: 0, DRAM drive strength normal
|
||||
# bit2: 0, ODT control Rtt[0] (Rtt=2, 150 ohm termination)
|
||||
# bit5-3: 0 required
|
||||
# bit6: 1, ODT control Rtt[1] (Rtt=2, 150 ohm termination)
|
||||
# bit9-7: 0 required
|
||||
# bit10: 0, differential DQS enabled
|
||||
# bit11: 0 required
|
||||
# bit12: 0, DRAM output buffer enabled
|
||||
# bit31-13: 0 required
|
||||
|
||||
DATA 0xFFD01424 0x0000F17F # DDR Controller Control High
|
||||
# bit2-0: 0x7 required
|
||||
# bit3: 1, MBUS Burst Chop disabled
|
||||
# bit6-4: 0x7 required
|
||||
# bit7: 0 required
|
||||
# bit8: 1, add writepath sample stage, must be 1 for DDR freq >= 300MHz
|
||||
# bit9: 0, no half clock cycle addition to dataout
|
||||
# bit10: 0, 1/4 clock cycle skew enabled for addr/ctl signals
|
||||
# bit11: 0, 1/4 clock cycle skew disabled for write mesh
|
||||
# bit15-12: 0xf required
|
||||
# bit31-16: 0 required
|
||||
|
||||
DATA 0xFFD01428 0x00085520 # DDR2 ODT Read Timing
|
||||
# bit3-0: 0 required
|
||||
# bit7-4: 2, 2 cycles from read command to assertion of M_ODT signal
|
||||
# bit11-8: 5, 5 cycles from read command to de-assertion of M_ODT signal
|
||||
# bit15-12: 5, 5 cycles from read command to assertion of internal ODT signal
|
||||
# bit19-16: 8, 8 cycles from read command to de-assertion of internal ODT signal
|
||||
# bit31-20: 0 required
|
||||
|
||||
DATA 0xFFD0147C 0x00008552 # DDR2 ODT Write Timing
|
||||
# bit3-0: 2, 2 cycles from write comand to assertion of M_ODT signal
|
||||
# bit7-4: 5, 5 cycles from write command to de-assertion of M_ODT signal
|
||||
# bit15-12: 5, 5 cycles from write command to assertion of internal ODT signal
|
||||
# bit19-16: 8, 8 cycles from write command to de-assertion of internal ODT signal
|
||||
# bit31-16: 0 required
|
||||
|
||||
DATA 0xFFD01500 0x00000000 # CS[0]n Base address to 0x0
|
||||
DATA 0xFFD01504 0x0FFFFFF1 # CS[0]n Size
|
||||
# bit0: 1, Window enabled
|
||||
# bit1: 0, Write Protect disabled
|
||||
# bit3-2: 0x0, CS0 hit selected
|
||||
# bit23-4: 0xfffff required
|
||||
# bit31-24: 0x0f, Size (i.e. 256MB)
|
||||
|
||||
DATA 0xFFD01508 0x10000000 # CS[1]n Base address to 256Mb
|
||||
DATA 0xFFD0150C 0x0FFFFFF5 # CS[1]n Size 256Mb Window enabled for CS1
|
||||
# bit0: 1, Window enabled
|
||||
# bit1: 0, Write Protect disabled
|
||||
# bit3-2: 1, CS1 hit selected
|
||||
# bit23-4: 0xfffff required
|
||||
# bit31-24: 0x0f, Size (i.e. 256MB)
|
||||
|
||||
DATA 0xFFD01514 0x00000000 # CS[2]n Size, window disabled
|
||||
DATA 0xFFD0151C 0x00000000 # CS[3]n Size, window disabled
|
||||
|
||||
DATA 0xFFD01494 0x00030000 # DDR ODT Control (Low)
|
||||
# bit3-0: 0b0000, (read) M_ODT[0] is not asserted during read from DRAM
|
||||
# bit7-4: 0b0000, (read) M_ODT[1] is not asserted during read from DRAM
|
||||
# bit15-8: 0 required
|
||||
# bit19-16: 0b0011, (write) M_ODT[0] is asserted during write to DRAM CS0 and CS1
|
||||
# bit23-20: 0b0000, (write) M_ODT[1] is not asserted during write to DRAM
|
||||
# bit31-24: 0 required
|
||||
|
||||
DATA 0xFFD01498 0x00000000 # DDR ODT Control (High)
|
||||
# bit1-0: 0, M_ODT[0] assertion is controlled by ODT Control Low register
|
||||
# bit3-2: 0, M_ODT[1] assertion is controlled by ODT Control Low register
|
||||
# bit31-4 0 required
|
||||
|
||||
DATA 0xFFD0149C 0x0000E803 # CPU ODT Control
|
||||
# bit3-0: 0b0011, internal ODT is asserted during read from DRAM bank 0-1
|
||||
# bit7-4: 0b0000, internal ODT is not asserted during write to DRAM bank 0-4
|
||||
# bit9-8: 0, Internal ODT assertion is controlled by fiels
|
||||
# bit11-10: 2, M_DQ, M_DM, and M_DQS I/O buffer ODT 75 ohm
|
||||
# bit13-12: 2, M_STARTBURST_IN I/O buffer ODT 75 ohm
|
||||
# bit14: 1, M_STARTBURST_IN ODT enabled
|
||||
# bit15: 1, DDR IO ODT Unit: Drive ODT calibration values
|
||||
# bit20-16: 0, Pad N channel driving strength for ODT
|
||||
# bit25-21: 0, Pad P channel driving strength for ODT
|
||||
# bit31-26: 0 required
|
||||
|
||||
DATA 0xFFD01480 0x00000001 # DDR Initialization Control
|
||||
# bit0: 1, enable DDR init upon this register write
|
||||
# bit31-1: 0, required
|
||||
|
||||
# End of Header extension
|
||||
DATA 0x0 0x0
|
||||
@ -136,6 +136,7 @@ hawkboard arm arm926ejs da8xxevm davinci
|
||||
hawkboard_nand arm arm926ejs da8xxevm davinci davinci hawkboard:NAND_U_BOOT
|
||||
hawkboard_uart arm arm926ejs da8xxevm davinci davinci hawkboard:UART_U_BOOT
|
||||
enbw_cmc arm arm926ejs enbw_cmc enbw davinci
|
||||
dns325 arm arm926ejs - d-link kirkwood
|
||||
km_kirkwood arm arm926ejs km_arm keymile kirkwood km_kirkwood:KM_DISABLE_PCI
|
||||
km_kirkwood_pci arm arm926ejs km_arm keymile kirkwood km_kirkwood:KM_RECONFIG_XLX
|
||||
mgcoge3un arm arm926ejs km_arm keymile kirkwood
|
||||
|
||||
188
include/configs/dns325.h
Normal file
188
include/configs/dns325.h
Normal file
@ -0,0 +1,188 @@
|
||||
/*
|
||||
* Copyright (C) 2011
|
||||
* Stefan Herbrechtsmeier <stefan@code.herbrechtsmeier.net>
|
||||
*
|
||||
* Based on Kirkwood support:
|
||||
* (C) Copyright 2009
|
||||
* Marvell Semiconductor <www.marvell.com>
|
||||
* Written-by: Prafulla Wadaskar <prafulla@marvell.com>
|
||||
*
|
||||
* See file CREDITS for list of people who contributed to this
|
||||
* project.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License as
|
||||
* published by the Free Software Foundation; either version 2 of
|
||||
* the License, or (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
|
||||
* MA 02110-1301 USA
|
||||
*/
|
||||
|
||||
#ifndef _CONFIG_DNS325_H
|
||||
#define _CONFIG_DNS325_H
|
||||
|
||||
/*
|
||||
* Machine number definition
|
||||
*/
|
||||
#define MACH_TYPE_DNS325 3800
|
||||
#define CONFIG_MACH_TYPE MACH_TYPE_DNS325
|
||||
#define CONFIG_IDENT_STRING "\nD-Link DNS-325"
|
||||
|
||||
/*
|
||||
* High Level Configuration Options (easy to change)
|
||||
*/
|
||||
#define CONFIG_FEROCEON_88FR131 /* CPU Core subversion */
|
||||
#define CONFIG_KIRKWOOD /* SOC Family Name */
|
||||
#define CONFIG_KW88F6281 /* SOC Name */
|
||||
#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */
|
||||
|
||||
/*
|
||||
* Commands configuration
|
||||
*/
|
||||
#define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */
|
||||
#include <config_cmd_default.h>
|
||||
#define CONFIG_CMD_DHCP
|
||||
#define CONFIG_CMD_ENV
|
||||
#define CONFIG_CMD_NAND
|
||||
#define CONFIG_CMD_PING
|
||||
#define CONFIG_CMD_USB
|
||||
#define CONFIG_CMD_IDE
|
||||
#define CONFIG_CMD_DATE
|
||||
#define CONFIG_SYS_MVFS
|
||||
|
||||
#define CONFIG_NR_DRAM_BANKS 1
|
||||
|
||||
/*
|
||||
* mv-common.h should be defined after CMD configs since it used them
|
||||
* to enable certain macros
|
||||
*/
|
||||
#include "mv-common.h"
|
||||
|
||||
/* Remove or override few declarations from mv-common.h */
|
||||
#undef CONFIG_SYS_PROMPT
|
||||
#define CONFIG_SYS_PROMPT "=> "
|
||||
|
||||
/*
|
||||
* Ethernet Driver configuration
|
||||
*/
|
||||
#ifdef CONFIG_CMD_NET
|
||||
#define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */
|
||||
#define CONFIG_NETCONSOLE
|
||||
#endif
|
||||
|
||||
/*
|
||||
* SATA Driver configuration
|
||||
*/
|
||||
#ifdef CONFIG_MVSATA_IDE
|
||||
#define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET
|
||||
#define CONFIG_SYS_ATA_IDE1_OFFSET MV_SATA_PORT1_OFFSET
|
||||
#endif
|
||||
|
||||
/*
|
||||
* RTC driver configuration
|
||||
*/
|
||||
#ifdef CONFIG_CMD_DATE
|
||||
#define CONFIG_RTC_MV
|
||||
#endif
|
||||
|
||||
/*
|
||||
* Enable GPI0 support
|
||||
*/
|
||||
#define CONFIG_KIRKWOOD_GPIO
|
||||
|
||||
/*
|
||||
* Use the HUSH parser
|
||||
*/
|
||||
#define CONFIG_SYS_HUSH_PARSER
|
||||
#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
|
||||
|
||||
/*
|
||||
* Console configuration
|
||||
*/
|
||||
#define CONFIG_CONSOLE_MUX
|
||||
#define CONFIG_SYS_CONSOLE_IS_IN_ENV
|
||||
|
||||
/*
|
||||
* Enable device tree support
|
||||
*/
|
||||
#define CONFIG_OF_LIBFDT
|
||||
|
||||
/*
|
||||
* Display cpu info at boot
|
||||
*/
|
||||
#define CONFIG_DISPLAY_CPUINFO
|
||||
|
||||
/*
|
||||
* Environment variables configurations
|
||||
*/
|
||||
#ifdef CONFIG_CMD_NAND
|
||||
#define CONFIG_ENV_IS_IN_NAND
|
||||
#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128KB */
|
||||
#else
|
||||
#define CONFIG_ENV_IS_NOWHERE
|
||||
#endif
|
||||
|
||||
#define CONFIG_ENV_SIZE 0x20000 /* 128KB */
|
||||
#define CONFIG_ENV_ADDR 0xe0000
|
||||
#define CONFIG_ENV_OFFSET 0xe0000 /* env starts here */
|
||||
|
||||
/*
|
||||
* Default environment variables
|
||||
*/
|
||||
#define MTDIDS_DEFAULT "nand0=orion_nand"
|
||||
|
||||
#define MTDPARTS_DEFAULT "mtdparts=orion_nand:" \
|
||||
"896k(u-boot),128k(u-boot-env),5m(kernel),-(rootfs)\0"
|
||||
|
||||
#define CONFIG_EXTRA_ENV_SETTINGS \
|
||||
"stdin=serial\0" \
|
||||
"stdout=serial\0" \
|
||||
"stderr=serial\0" \
|
||||
"loadaddr=0x800000\0" \
|
||||
"autoload=no\0" \
|
||||
"console=ttyS0,115200\0" \
|
||||
"mtdparts="MTDPARTS_DEFAULT \
|
||||
"optargs=\0" \
|
||||
"bootenv=uEnv.txt\0" \
|
||||
"importbootenv=echo Importing environment ...; " \
|
||||
"env import -t ${loadaddr} ${filesize}\0" \
|
||||
"loadbootenv=fatload usb 0 ${loadaddr} ${bootenv}\0" \
|
||||
"setbootargs=setenv bootargs console=${console} " \
|
||||
"${optargs} " \
|
||||
"${mtdparts} " \
|
||||
"root=${bootenvroot} " \
|
||||
"rootfstype=${bootenvrootfstype}\0" \
|
||||
"subbootcmd=run setbootargs; " \
|
||||
"if run bootenvloadimage; then " \
|
||||
"bootm ${loadaddr};" \
|
||||
"fi;\0" \
|
||||
"nandroot=ubi0:rootfs ubi.mtd=rootfs\0" \
|
||||
"nandrootfstype=ubifs\0" \
|
||||
"nandloadimage=nand read ${loadaddr} kernel\0" \
|
||||
"setnandbootenv=echo Booting from nand ...; " \
|
||||
"setenv bootenvroot ${nandroot}; " \
|
||||
"setenv bootenvrootfstype ${nandrootfstype}; " \
|
||||
"setenv bootenvloadimage ${nandloadimage}\0"
|
||||
|
||||
#define CONFIG_BOOTCOMMAND \
|
||||
"if test -n ${bootenv} && usb start; then " \
|
||||
"if run loadbootenv; then " \
|
||||
"echo Loaded environment ${bootenv} from usb;" \
|
||||
"run importbootenv;" \
|
||||
"fi;" \
|
||||
"if test -n ${bootenvcmd}; then " \
|
||||
"echo Running bootenvcmd ...;" \
|
||||
"run bootenvcmd;" \
|
||||
"fi;" \
|
||||
"fi;" \
|
||||
"run setnandbootenv subbootcmd;"
|
||||
|
||||
#endif /* _CONFIG_DNS325_H */
|
||||
Loading…
Reference in New Issue
Block a user