Commit Graph

523 Commits

Author SHA1 Message Date
wdenk
f8883cb101 Fix byteorder problem in usbboot and scsiboot commands. 2005-02-04 15:38:08 +00:00
wdenk
20a80418f9 * Patch by Cajus Hahn, 04 Feb 2005:
- don't insist on leading '/' for filename in ext2load
  - set default partition to useful value (1) in ext2load

* Patch by Andrew Dyer, 08 Jan 2005:
  fix wrong return codes in ext2 code
2005-02-04 15:02:06 +00:00
wdenk
1a344f298d * Removed '--no-warn-mismatch' option from Makefile. This option
makes 'ld' to overlook binary objects compatibility.

* Moved $(PLATFORM_LIBS) from the library group (--start-group ...
  --end-group) outside of the group. This will make 'ld' to do
  _multiple_ search in the library group when resolving symbol
  references and do only a _single_ seach in libgcc.a after the group
  search.

* Fix stability problems on CPC45 board again.

* Make image detection for diskboot / usbboot / scsiboot more robust
  (also check header checksum)
2005-02-03 23:00:49 +00:00
wdenk
436be29cad * Update CPC45 board configuration.
* Add USB and PCI support for INKA4x0 board
2005-01-31 22:09:11 +00:00
wdenk
cd172b7108 Fix IDE stability problems on CPC45 board. 2005-01-22 18:26:04 +00:00
wdenk
c3d2b4b48a Code cleanup. 2005-01-22 18:13:04 +00:00
wdenk
5a95f6fbd2 * Patch by Robin Getz, 13 Oct 2004:
Add standalone application to change SMC91C111 MAC addresses,
  see examples/README.smc91111_eeprom

* Patch by Xiaogeng (Shawn) Jin, 12 Oct 2004:
  Fix Flash support for ARM Integrator CP.
2005-01-12 00:38:03 +00:00
wdenk
289f932c5f * Some Cleanup.
* Patch by Richard Woodruff, 10 Jan 2005:
  Update support for OMAP2420 (ARM11) and H4 board:
  o clean up and add new types to H4 memory probe code.
  o fix to work with internal boot.
  o added PRCM config III operation.
  o fix marginal flash timings.
  o add revison ATAG usage.
  o enable voltage scaling at power chip.
  o fix compile error for i2c.

* Fix network problem (error when receiving multiple ARP packets)
2005-01-12 00:15:14 +00:00
wdenk
652a10c096 * Patch by Daniel Poirot, 10 Oct 2004:
Add support for Wind River sbc405 board

* Patch by Rainer Brestan, 12 Oct 2004:
  Make examples/Makefile more robust
2005-01-09 23:48:14 +00:00
wdenk
6225c5db6c * Patch by Sam Song, 11 October 2004:
- Add RESET/PREBOOT/AUTOBOOT support for RPXlite_DW board
  - Adjust CPU:BUS frequency ratio 1:1 when core frequency
    less than 50MHz

* Patch by Sam Song, 10 Oct 2004:
  Fix a parameter error in run_command() in main.c
2005-01-09 23:33:49 +00:00
wdenk
8ed9604613 * Patches by Richard Woodruff, 01 Oct 2004:
add support for the TI OMAP2420 processor and its H4 reference
  board

* Patch by Christian Pellegrin, 24 Sep 2004:
  Added support for NE2000 compatible (DP8390, DP83902) NICs.
2005-01-09 23:16:25 +00:00
wdenk
ff36fd8591 * Patch by Leif Lindholm, 23 Sep 2004:
add support for the AMD db1550 board

* Patch by Travis Sawyer, 15 Sep 2004:
  Add CONFIG_SERIAL_MULTI support for ppc4xx,
  update README.serial_multi
2005-01-09 22:28:56 +00:00
wdenk
6310eb9da7 Patches by David Snowdon, 07 Sep 2004:
- add u-boot.hex target in the top level Makefile
- add support for the UNSW/NICTA PLEB 2 board (pleb2)
- use -mtune=xscale and -march=armv5 options for PXA
2005-01-09 21:28:15 +00:00
wdenk
a562e1bd9d Patch by Florian Schlote, 08 Sep 2004:
Add support for SenTec-COBRA5272-board (Coldfire).
2005-01-09 18:21:42 +00:00
wdenk
30ce5ab043 * Patch by Gleb Natapov, 07 Sep 2004:
mpc824x: set PCI latency timer to a sane value
  (is 0 after reset).

* Patch by Kurt Stremerch, 03 Sep 2004:
  Add bitstream configuration option for fpga command (Xilinx only).
2005-01-09 18:12:51 +00:00
wdenk
9dd611b8c1 * Patch by Kurt Stremerch, 03 Sep 2004:
Add Xilinx Spartan2E family FPGA support

* Patch by Jeff Angielski, 02 Sep 2004:
  Add Added support for H2 revision of the EP8260 board.
  Fixed formatting for some of the EP8260 related source files.
2005-01-09 17:19:34 +00:00
wdenk
a1191902ca * Patch by Jon Loeliger, 02 Sep 2004:
Reset monitor size back to 256 so environment can be written
  to flash on MPC85xx ADS and CDS releases.

* Patch by Paolo Broggini, 02 Sep 2004:
  Make BSS clearing on ARM systems more robust

* Patch by Yue Hu and Joe, 01 Sep 2004:
  - add PCI support for ixp425;
  - add EEPRO100 suppor tfor ixdp425 board.

* Fix problem with protected sector detection in driver/cfi_flash.c
2005-01-09 17:12:27 +00:00
wdenk
15c7a8efd2 Release U-Boot 1.1.2 2005-01-02 17:02:54 +00:00
wdenk
e2ffd59b4d * Code cleanup, mostly for GCC-3.3.x
* Cleanup confusing use of CONFIG_ETH*ADDR - ust his only to
  pre-define a MAC address; use CONFIG_HAS_ETH* to enable support for
  additional ethernet addresses.

* Cleanup drivers/i82365.c - avoid duplication of code

* Fix bogus "cannot span across banks" flash error message

* Add support for CompactFlash for the CPC45 Board.
2004-12-31 09:32:47 +00:00
wdenk
08f272787a * Fix problems with CMC_PU2 flash driver.
* Adjust INKA 4x0 default settings
2004-12-19 21:39:27 +00:00
wdenk
ec0aee7b68 Cleanup: avoid trigraph warning in fs/ext2/ext2fs.c; rename UC100 -> uc100 2004-12-19 09:58:11 +00:00
wdenk
f7d1572bf5 Add support for UC100 board 2004-12-18 22:35:43 +00:00
stroese
8cba1907b8 Patch by Stefan Roese, 16 Dez 2004 2004-12-16 18:47:58 +00:00
wdenk
138ff60c1e Add support for INKA4X0 board 2004-12-16 15:52:40 +00:00
wdenk
689aec1b05 Patch by Steven Scholz, 12 Dec 2004:
Fix typo in AT91 memory setup.
2004-12-13 00:18:44 +00:00
wdenk
7e6bf358d8 Patch by Martin Krause, 27 Oct 2004:
- add support for "STK52xx" board (including PS/2 multiplexer)
- add hardware detection for TQM5200
2004-12-12 22:06:17 +00:00
wdenk
25d6712a81 * Clean up CMC PU2 flash driver
* Update MAINTAINERS file

* Fix bug in MPC823 LCD driver
2004-12-10 11:40:40 +00:00
wdenk
ed54e62125 * Fix udelay() on AT91RM9200 for delays < 1 ms.
* Enable long help on CMC PU2 board;
  fix reset issue;
  increase CPU speed from 179 to 207 MHz.
2004-11-24 23:35:19 +00:00
wdenk
bb310d462b Fix smc91111 ethernet driver for Xaeniax board (need to handle
unaligned tail part specially).
2004-11-22 22:20:07 +00:00
wdenk
9d5028c2f7 * Update for AT91RM9200DK and CMC_PU2 boards:
- Enable booting directly from flash
  - fix CMC_PU2 flash driver

* Fix mkimage usage message
2004-11-21 00:06:33 +00:00
wdenk
cacfab588a Map SRAM on NC650 board 2004-11-17 20:44:20 +00:00
wdenk
1f6d4258c2 Work around for Ethernet problems on Xaeniax board 2004-11-02 13:00:33 +00:00
wdenk
983fda8391 Patch by TsiChung Liew, 23 Sep 2004:
- add support for MPC8220 CPU
- Add support for Alaska and Yukon boards
2004-10-28 00:09:35 +00:00
wdenk
e3c9b9f928 * Fix configuration for ERIC board (needs more room)
* Adjust MIPS compiler options at run-time depending on tools version
  ("-march=4kc -mtune=4kc -Wa,-mips_allow_branch_to_undefined" for new,
  "-mcpu=4kc" for old tools)
2004-10-24 23:54:40 +00:00
wdenk
14699a22cf Add passing of the command line and memory size information to the
kernel on xaeniax board.
2004-10-19 22:17:51 +00:00
wdenk
8b74bf31fe Cleanup 2004-10-11 23:10:30 +00:00
wdenk
4cfaf55e5c * Enable NAND flash support for NC650 board.
* Patch by Thomas Lange 07 Oct 2004:
  Updated README for DBAu1x00 boards to match current status
2004-10-11 23:03:10 +00:00
wdenk
d407bf52b5 * Patch by Philippe Robin, 28 Sept 2004:
Fix Flash support for Versatile.

* Patch by Roger Blofeld, 16 Sep 2004:
  Fix timeout for DHCP command retry
2004-10-11 22:51:13 +00:00
wdenk
2ee665339b * Patch by Pantelis Antoniou, 14 Sep 2004:
Fix early serial hang when CONFIG_SERIAL_MULTI is defined.

* Patch by Pantelis Antoniou, 14 Sep 2004:
  Kick watchdog when bz-decompressing
2004-10-11 22:43:02 +00:00
wdenk
9455b7f39c Fix CFG_HZ problems on AT91RM9200 systems
[Remember: CFG_HZ should be 1000 on ALL systems!]
2004-10-11 22:25:49 +00:00
wdenk
e1599e83d6 * Patch by Gridish Shlomi, 30 Aug 2004:
- Add support to revA version of PQ27 and PQ27E.
  - Reverted MPC8260ADS baudrate back to original 115200

* Patch by Hojin, 17 Sep 2004:
  Fix typo in cfi_flash.c

* Patch by Mark Jonas, 09 September 2004:
  mtest's data line test (with CFG_ALT_MEMTEST set) returned a wrong
  error message

* Patch by Mark Jonas, 31 August 2004:
  Added option CFG_XLB_PIPELINING to enable XLB pipelining. This
  improves FTP performance for MPC5200 systems. Enabled for IceCube
  by default.
2004-10-10 23:27:33 +00:00
wdenk
c15f3120ec * Patch by Michael Bendzick, 30 Aug 2004:
- Improve platform.S code for omap1510inn that detects whether code
    is running from SDRAM or not. Patch allows SDRAM to be configured
    if code is running out of SRAM at 0x20000000.

* Patch by Frederick Klatt, 30 Aug 2004:
  Add support for the Wind River SBC8540/SBC8560 boards
2004-10-10 22:44:24 +00:00
wdenk
656658dd15 * Configure SX1 board to use drivers/cfi_flash.c
* Patches by Michael Bendzick, 30 Aug 2004:
  - Configure omap1510inn board to use drivers/cfi_flash.c
  - Make drivers/cfi_flash.c protect environment and redundant
    environment.

* Patch by Steven Scholz, 23 Jun 2004:
  - Add script (tools/img2brec.sh) to programm U-Boot into
    (Synch)Flash using the Bootstrap Mode of the MC9328MX1/L
2004-10-10 22:16:06 +00:00
wdenk
5c952cf024 Patches by Scott McNutt, 24 Aug 2004:
- Add support for Altera Nios-II processors.
- Add support for Psyent PCI-5441 board.
- Add support for Psyent PK1C20 board.
2004-10-10 21:27:30 +00:00
wdenk
03f5c55021 Patches by Jon Loeliger, 24 Aug 2004:
- Add support for the MPC8541 and MPC8555 CDS boards
- Cleanup eth?addr handling: make dependent on CONFIG_ETH?ADDR
2004-10-10 21:21:55 +00:00
wdenk
cf33678e51 * Patch by Jon Loeliger, 24 Aug 2004:
- Fix PCI window on MPC85xx; remove unneeded PCI initialization
    from board_early_init_f()
  - Provide SW workaround for PCI initialization on 85xx CDS
  - Convert MPC85xxADS to use common CFI flash driver

* Cleanup: avoid compiler warnings

* Add CMC PU2 board to MAKEALL script
2004-10-10 20:23:57 +00:00
wdenk
08b6aa6154 Patches by George G. Davis, 24 Aug 2004:
- Enable ramdisk/initrd tagged param support for omap1610h2_config
- Remove static network setup defaults from mx1ads_config
2004-10-10 18:49:14 +00:00
wdenk
731215ebde Patch by George G. Davis, 24 Aug 2004:
- update ARM boards to use constants from mach-types.h
2004-10-10 18:41:04 +00:00
wdenk
b65085130a Code Cleanup
Patch by Gary Jennejohn, 04 Oct 2004:
- fix I2C on at91rm9200
- add support for Ricoh RS5C372A RTC
2004-10-10 18:03:33 +00:00
wdenk
2cbe571a56 * Patch by Gary Jennejohn, 01 Oct 2004:
- add support for CMC PU2 board
  - add support for I2C on at91rm9200

* Patch by Gary Jennejohn, 28 Sep 2004:
  fix baudrate handling on at91rm9200
2004-10-10 17:05:18 +00:00
wdenk
659883c298 Patch by Yuli Barcohen, 22 Aug 2004:
- remove ZPC.1900 board-specific flash driver;
  switch the port to generic CFI driver;
- port clean-up
2004-10-09 23:33:42 +00:00
wdenk
f325e18beb Patch by Hinko Kocevar, 21 Aug 2004:
Add calc_fbsize() function used with VIDEOLFB_TAG on TRAB
2004-10-09 23:28:40 +00:00
wdenk
8655b6f860 * Clean up tools/bmp_logo.c to not add trailing white space
* Patch by Hinko Kocevar, 21 Aug 2004:
  - Group common framebuffer functions in common/lcd.c
  - Group common framebuffer macros and #defines in include/lcd.h
  - Provide calc_fbsize() for video ATAG
2004-10-09 23:25:58 +00:00
wdenk
30d56fae23 Patch by Sam Song, 21 August 2004:
- Fix a typo in README
- Align "(RO)" output for "flinfo" after "protect on"
- Add RESET support for RPXlite_DW board; adjust CPU:BUS frequency
  ratio 1:1 when core frequency less than 50MHz
2004-10-09 22:44:59 +00:00
wdenk
63cfcbb4e2 Patches by himba, 21 Aug 2004:
- fix some "use of label at end of compound statement" warnings
- Define type of LCD panel on lubbock board if CONFIG_LCD is used
2004-10-09 22:32:26 +00:00
wdenk
1d9f410500 Patch by Steven Scholz, 16 Aug 2004:
- Introducing the concept of SoCs "./cpu/$(CPU)/$(SOC)"
- creating subdirs for SoCs ./cpu/arm920t/imx and ./cpu/arm920t/s3c24x0
- moving SoC specific code out of cpu/arm920t/ into cpu/arm920t/$(SOC)/
- moving drivers/s3c24x0_i2c.c and drivers/serial_imx.c out of drivers/
  into cpu/arm920t/$(SOC)/
2004-10-09 22:21:29 +00:00
wdenk
a5bbcc3c53 * Patches by Sean Chang, 09 Aug 2004:
- Added support for both 8 and 16 bit mode access to System ACE CF
    through MPU.
  - Fixed missing System ACE CF device during get FAT partition info
    in fat_register_device function.
  - Enabled System ACE CF support on ML300.

* Patch by Sean Chang, 09 Aug 2004:
  Synch defines for saveenv and do_saveenv functions so they get
  compiled under the same statement.
2004-09-29 22:55:14 +00:00
wdenk
a06752e36b * Patch by Sean Chang, 9 Aug 2004:
- Added I2C support for ML300.
  - Added support for ML300 to read out its environment information
    stored on the EEPROM.
  - Added support to use board specific parameters as part of
    U-Boot's environment information.
  - Updated MLD files to support configuration for new features
    above.

* Patches by Travis Sawyer, 5 Aug 2004:
  - Remove incorrect bridge settings for eth group 6
  - Add call to setup bridge in ppc_440x_eth_initialize
  - Fix ppc_440x_eth_init to reset the phy only if its the
    first time through, otherwise, just check the phy for the
    autonegotiated speed/duplex.  This allows the use of netconsole
  - only print the speed/duplex the first time the phy is reset.
2004-09-29 22:43:59 +00:00
wdenk
da93ed8147 * Patch by Shlomo Kut, 29 Mar 2004:
Add support for MKS Instruments "Quantum" board

* Fix build problem with Cogent boards;
  avoid using <asm/byteorder.h> when using the host compiler
2004-09-29 11:02:56 +00:00
wdenk
a5725fabc0 * Patch by Ganapathi C, 04 Aug 2004:
Fix NFS timeout issue
2004-09-28 21:51:42 +00:00
wdenk
e1a3f6b39b * Patch by Yuli Barcohen, 19 Jul 2004:
- Fix host tools building in Cygwin environment
  - Fix header files search order for host tools

* Patch by Tom Armistead, 19 Jul 2004:
  Fix kgdb.S support for 74xx_75x cpu
2004-09-28 21:39:45 +00:00
wdenk
c65fdc74aa * Patch by Jon Loeliger, 15 Jul 2004:
Fix MPC85xx I2C driver
2004-09-28 21:26:26 +00:00
wdenk
64f70bede3 Fix problems with CDROM drive as slave device on Lite5200 IDE bus. 2004-09-28 20:34:50 +00:00
wdenk
cce625e557 * Patch by Stephen Williams, 15 July 2004
Set the PCI class code for JSE board as part of PCI interface setup

* Patch by Michael Bendzick, 15 Jul 2004:
  Fix problem with writes with odd sizes in drivers/cfi_flash.c when
  CFG_FLASH_USE_BUFFER_WRITE is set
2004-09-28 19:00:19 +00:00
wdenk
66ca92a5ba * Patch by Yuli Barcohen, 13 Jul 2004:
Allow clock setting on MPC866/MPC885 series chips according to
  environment variable `cpuclk'

* Patch by Yuli Barcohen, 20 Apr 2004:
  Remove unnecessary redefine of CPM_DATAONLY_SIZE for MPC826x
2004-09-28 17:59:53 +00:00
wdenk
4ec3a7f0fd Patch by Vincent Dubey, 24 Sep 2004:
Add support for xaeniax board
2004-09-28 16:44:41 +00:00
wdenk
79536a6eb0 * Add comment about non-GPL character of standalone applications to
COPYING file

* Fix FEC ethernet problem on NSCU board.
2004-09-27 20:20:11 +00:00
wdenk
4734cb78d8 Patch by Gary Jennejohn, 09 Sep 2004:
allow to use USART1 as console port on at91rm9200dk boards
2004-09-21 23:33:32 +00:00
stroese
c354839349 Patch by Stefan Roese, 16 Sep 2004 2004-09-16 12:37:13 +00:00
wdenk
1d6f97209e Fix SysClk handling for PPChameleon and CATcenter boards 2004-09-09 17:44:35 +00:00
wdenk
eedcd078fe * Patch by Detlev Zundel, 08 Sep 2004:
Update etags build target

* Improve NetConsole support: add support for broadcast destination
  address and buffered input.

* Cleanup compiler warnings for GCC 3.3.x and later

* Fix problem in cmd_jffs2.c introduced by CFG_JFFS_SINGLE_PART patch
2004-09-08 22:03:11 +00:00
wdenk
7ca202f566 Add support for IDS "NC650" board 2004-08-28 22:45:57 +00:00
wdenk
31a649234e * Add automatic update support for LWMON board
* Enable MSDOS/VFAT filesystem support for LWMON board

* Clear Block Lock-Bits when erasing flash on LWMON board.

* Fix return code of "fatload" command

* Disable debugging for TQM5200 board
2004-08-28 21:09:14 +00:00
wdenk
89394047ba * Patch by Martin Krause, 03 Aug 2004:
change timing for SM501 graphics controller on TQM5200 module

* Patch by Mark Jonas, 13 July 2004:
  - Total5200 LCD now run in little endian mode. Endianess conversion
    is done in hardware.
  - Removed last reference to "console" environment variable.
2004-08-04 21:56:49 +00:00
wdenk
429168ea88 Patches by Lars Munch, 12 Jul 2004:
- move at45.c to board/at91rm9200dk/ since this is at91rm9200dk
  board specific
- split out the LXT971A PHY from ns_9750_eth.h
- split the dm9161 phy part out of at91rm9200_ether.c
2004-08-02 23:39:03 +00:00
wdenk
6705d81e90 * Patch by Andreas Engel, 12 Jul 2004:
Replaced hardcoded PL011 clock frequency with config variable.
  Fixed wrong CONFIG_CMD_DFL doc.

* Patch by Thomas Viehweger, 09 Jun 2004:
  make it possible to remove chpart when there is only one partition
2004-08-02 23:22:59 +00:00
wdenk
68ceb29e71 Add support for console over UDP (compatible to Ingo Molnar's
netconsole patch under Linux)
2004-08-02 21:11:11 +00:00
wdenk
9aea95307f Patch by Jon Loeliger, 16 Jul 2004:
- support larger DDR memories up to 2G on the PC8540/8560ADS and
  STXGP3 boards
- Made MPC8540/8560ADS be 33Mhz PCI by default.
- Removed moldy CONFIG_RAM_AS_FLASH, CFG_FLASH_PORT_WIDTH_16
  and CONFIG_L2_INIT_RAM options.
- Refactor Local Bus initialization out of SDRAM setup.
- Re-implement new version of LBC11/DDR11 errata workarounds.
- Moved board specific PCI init parts out of CPU directory.
- Added TLB entry for PCI-1 IO Memory
- Updated README.mpc85xxads
2004-08-01 23:02:45 +00:00
wdenk
281e00a3be * Code cleanup
* Patch by Sascha Hauer, 28 Jun:
  - add generic support for Motorola i.MX architecture
  - add support for mx1ads, mx1fs2 and scb9328 boards

* Patches by Marc Leeman, 23 Jul 2004:
  - Add define for the PCI/Memory Buffer Configuration Register
  - corrected comments in cpu/mpc824x/cpu_init.c

* Add support for multiple serial interfaces
  (for example to allow modem dial-in / dial-out)
2004-08-01 22:48:16 +00:00
wdenk
cfca5e604d * Fix NSCU config; add ethernet wakeup code.
* Add link for preloader for Motorola Coldfire to RAEDME.m68k
2004-08-01 13:09:47 +00:00
stroese
45eeb8983c Patch by Stefan Roese, 15 Jul 2004 2004-07-15 14:41:43 +00:00
wdenk
75b1fa7864 Patch by Michael Bendzick, 12 Jul 2004:
fix output formatting in drivers/cfi_flash.c
2004-07-12 22:34:51 +00:00
wdenk
07cba3514b Patch by Mark Jonas, 02 Jul 2004:
Fix lowboot (again) on MPC5xxx
2004-07-12 14:37:59 +00:00
wdenk
cdc7fea173 Patch by Curt Brune, 07 Jul 2004:
relocate exception vectors on arm720t if needed
2004-07-11 22:27:55 +00:00
wdenk
a1f4a3dd05 * Patch by George G. Davis, 06 Jul 2004:
- update mach-types.h to latest arm.linux.org.uk master list
  - Set correct OMAP1610 bi_arch_number for build target

* Patch by Curt Brune, 06 Jul 2004:
  evb4510: add support for timer interrupt; cleanup
2004-07-11 22:19:26 +00:00
wdenk
b9283e2dbe * Patch by Dan Poirot, 06 Jul 2004:
Fix sbc8260 environment variables

* Cleanup redundand "console" environment variable
2004-07-11 21:49:42 +00:00
wdenk
810509266f * Cleanup
* Patch by Mark Jonas, 05 Jul 2004:
  add support for the Total5100's and Total5200's LCD screen

* Patches by Dan Eisenhut, 01 Jul 2004:
  - README fixes.
  - Move doc2000.h include to prevent compiler warning on some boards
2004-07-11 20:04:51 +00:00
wdenk
6c7a14084a Patch by Mark Jonas, 01 Jul 2004:
Added support for Total5100 and Total5200 (Rev.1 and Rev.2)
MGT5100 and MPC5200 based Freescale platforms.
2004-07-11 19:17:20 +00:00
wdenk
bc54f309a1 * Patch by Philippe Robin, 01 Jul 2004:
Add initialization for Integrator and versatile board files.

* Patch by Hinko Kocevar, 01 Jun 2004:
  Fix VFD FB allocation, add LCD FB allocation on ARM
2004-07-11 18:10:30 +00:00
wdenk
56523f1283 * Patch by Martin Krause, 30 Jun 2004:
Add support for TQM5200 board

* Patch by Martin Krause, 29 Jun 2004:
  Add loopw command: infinite write loop on address range
2004-07-11 17:40:54 +00:00
wdenk
857cad37a4 Patches by Yasushi Shoji, 29 Jun 2004:
- add empty include/asm-microblaze/processor.h
- add to CREDITS and MAINTAINERS
- add gd initialization
- add MicroBlaze and SUZAKU board to MAKEALL script
- add reset support for SUZAKU
- add flush_cache() for MicroBlaze
- add CFG_FLASH_SIZE to include/configs/suzaku.h since we have fixed
  size flash memory on SUZAKU
2004-07-10 23:48:41 +00:00
wdenk
fabd46acff * Patch by Prakash Kumar, 27 Jun 2004:
Add support for the PXA250 based Intrinsyc Cerf board.

* Patch by Yasushi Shoji, 27 Jun 2004:
  fix comment in include/common.h
2004-07-10 23:11:10 +00:00
wdenk
466b74108f * Rename SBC8560 into sbc8560 for consistency
* Patch by Daniel Poirot, 24 Jun 2004:
  Add support for Wind River's sbc8240 board

* Patches by Yasushi Shoji, 26 Jun 2004:
  - drivers/serial_xuartlite.c: fix "return 0" in void function
  - add microblaze support to mkimage tool
2004-07-10 22:35:59 +00:00
wdenk
8b07a1103d * Patch by Fred Klatt, 25 Jun 2004:
Add support for WindRiver's SBC8560 board

* Patch by Nicolas Lacressonniere, 24 Jun 2004
  Small Bugs fixes for "at91rm9200dk" board:
  - Timing modifications for SPI DataFlash access
  - Fix NAND flash detection bug

* Patch by Nicolas Lacressonniere, 24 Jun 2004:
  Add Support for Flash AT49BV6416 for AT91RM9200DK board
2004-07-10 21:45:47 +00:00
wdenk
0ac6f8b749 Patch by Jon Loeliger, 17 June 2004:
Completion of the 8540ADS/8560ADS updates:
Fix some PCI and Rapid I/O memory maps,
Initialize both TSEC 1 and 2,
Initialize SDRAM
Update MAINTAINER for 85xx boards and README.mpc85xxads
2004-07-09 23:27:13 +00:00
wdenk
262381329b * Patch by Yuli Barcohen, 16 Jun 2004:
Remove obsolete AdderII port which was superseded by unified
  AdderII/Adder87x port

* Patch by Ladislav Michl, 16 Jun 2004:
  Fix gcc-3.3.3 warnings for smc91111.c
2004-07-09 22:51:01 +00:00
stroese
ede130229c Patch by Stefan Roese, 02 Jul 2004 2004-07-02 14:38:26 +00:00
wdenk
78953f2f93 Patch by Paul Ruhland, 11 Jun 2004:
Remove debug code from 'board/lpd7a40x/flash.c'
2004-07-01 22:02:29 +00:00
wdenk
e55ca7e262 Patch by Andrea Marson, 11 Jun 2004:
Update for PPChameleon board:
- support for SysClk @ 25MHz
- support for Silicon Motion SM712 VGA controller
- some clean ups
2004-07-01 21:40:08 +00:00
wdenk
93f6a6771b * Patches by Richard Woodruff, 10 Jun 2004:
- fix problems with examples/stubs.c for GCC >= 3.4
  - fix problems with gd initialization

* Enable FAT filesystem support for HMI10 board
2004-07-01 20:28:03 +00:00
wdenk
39539887ea * Code cleanup (ARM mostly)
* Patch by Curt Brune, 17 May 2004:
  - Add support for Samsung S3C4510B CPU (ARM7tdmi based SoC)
  - Add support for ESPD-Inc. EVB4510 Board
2004-07-01 16:30:44 +00:00
wdenk
e94d2cd9d1 * Fix "cls" command when used with splash screen
* Increase NFS download timeout (now 1 min - 10 sec is to short for a
  slow download of a big image)
2004-06-30 22:59:18 +00:00
wdenk
c3f4d17e05 Add "cls" function to MPC823 LCD driver so we can reinitialize the
display even after showing a bitmap
2004-06-25 23:35:58 +00:00
wdenk
49822e23a0 Patch by Josef Wagner, 04 Jun 2004:
- DDR Ram support for PM520 (MPC5200)
- support for different flash types (PM520)
- USB / IDE / CF-Card / DiskOnChip support for PM520
- 8 bit boot rom support for PM520/CE520
- Add auto SDRAM module detection for MicroSys CPC45 board (MPC8245)
- I2C and RTC support for CPC45
- support of new flash type (28F160C3T) for CPC45
2004-06-19 21:19:10 +00:00
wdenk
46a414dc12 * Fix flash parameters passed to Linux for PPChameleon board
* Remove eth_init() from lib_arm/board.c; it's done in net.net.c.
2004-06-17 18:50:45 +00:00
wdenk
f832d8a143 * Patch by Paul Ruhland, 10 Jun 2004:
fix support for Logic SDK-LH7A404 board and clean up the
  LH7A404 register macros.

* Patch by Matthew McClintock, 10 Jun 2004:
  Modify code to select correct serial clock on Sandpoint8245
2004-06-10 21:55:33 +00:00
wdenk
b54d32b40d * Patch by Robert Schwebel, 10 Jun 2004:
Add support for Intel K3 strata flash.

* Some cleanup

* Patch by Thomas Brand, 10 Jun 2004:
  Fix "loads" command on DK1S10 board
2004-06-10 21:34:36 +00:00
wdenk
99edcfb29e Patch by Yuli Barcohen, 09 Jun 2004:
Add support for 8MB flash SIMM and JFFS2 file system on
Motorola FADS board and its derivatives (MPC86xADS, MPC885ADS).
2004-06-09 21:54:22 +00:00
wdenk
2d24a3a787 * Patch by Yuli Barcohen, 09 Jun 2004:
Add support for Analogue&Micro Adder87x and the older AdderII board.

* Patch by Ming-Len Wu, 09 Jun 2004:
  Add suppport for MC9328 (Dargonball) CPU and Motorola MX1ADS board
2004-06-09 21:50:45 +00:00
wdenk
e63c8ee3dc Patch by Sam Song, 09 Jun 2004:
- Add support for RPXlite_DW board
- Update FLASH driver for 4*AM29DL323DB90VI
- Add option configuration of CFG_ENV_IS_IN_NVRAM on RPXlite_DW board
2004-06-09 21:04:48 +00:00
wdenk
36c728774e * Patch by Mark Jonas, 08 June 2004:
- Make MPC5200 boards evaluate the SVR to print processor name and
    version in checkcpu() (cpu/mpc5xxx/cpu.c).

* Patch by Kai-Uwe Bloem, 06 May 2004:
  Fix endianess problem in cramfs code
2004-06-09 17:45:32 +00:00
wdenk
4c0d4c3b78 * Patch by Tom Armistead, 04 Jun 2004:
Add support for MAX6900 RTC

* Patches by Ladislav Michl, 03 Jun 2004:
  - fix cfi_flash.c on LE systems
  - let 'make mrproper' delete u-boot.img as well
  - turn printf into debug in cfi_flash.c
2004-06-09 17:34:58 +00:00
wdenk
ca0e774894 Patch by Kurt Stremerch, 28 May 2004:
Add support for Exys XSEngine board

Some code cleanup.
2004-06-09 15:37:23 +00:00
wdenk
697037fe9b * Patch by Martin Krause, 27 May 2004:
Fix a MPC5xxx I2C timing issue in i2c_probe().

* Patch by Leif Lindholm, 27 May 2004:
  Fix board_init_f() for dbau1x00 board.
2004-06-09 15:29:49 +00:00
wdenk
3ff02c27d5 * Patch by Imre Deak, 26 May 2004:
On OMAP1610 platforms check if booting from RAM(CS0) or flash(CS3).
  Set flash base accordingly, and decide whether to do or skip board
  specific setup steps.

* Patch by Josef Baumgartner, 26 May 2004:
  Add missing define in include/asm-m68k/global_data.h
2004-06-09 15:25:53 +00:00
wdenk
70f05ac34e * Patch by Josef Baumgartner, 25 May 2004:
Add missing functions get_ticks() and get_tbclk() in lib_m68k/time.c

* Patch by Paul Ruhland, 24 May 2004:
  fix SDRAM initialization for LPD7A400 board.
2004-06-09 15:24:18 +00:00
wdenk
13a5695b7c Patch by Jian Zhang, 20 May 2004:
add support for environment in NAND flash
2004-06-09 14:58:14 +00:00
wdenk
c3c7f861ae Patch by Yuli Barcohen, 20 May 2004:
Add support for Interphase iSPAN boards.
2004-06-09 14:47:54 +00:00
wdenk
f39748ae8e * Patch by Paul Ruhland, 17 May 2004:
- Add support for the Logic Zoom LH7A40x based SDK board(s),
    specifically the LPD7A400.

* Patches by Robert Schwebel, 15 May 2004:
  - call MAC address reading code also for SMSC91C111;
  - make SMSC91C111 timeout configurable, remove duplicate code
  - fix get_timer() for PXA
  - update doc/README.JFFS2
  - use "bootfile" env variable also for jffs2
2004-06-09 13:37:52 +00:00
wdenk
aa24509041 Patch by Tolunay Orkun, 14 May 2004:
Add support for Cogent CSB472 board (8MB Flash Rev)
2004-06-09 12:47:02 +00:00
wdenk
aa5590b66f Patch by Thomas Viehweger, 14 May 2004:
- flash.h: more flash types added
- immap_8260.h: some bits added (useful for RMII)
- cmd_coninfo.c: typo corrected, printf -> puts
- reduced size by replacing spaces with tab
2004-06-09 12:42:26 +00:00
wdenk
48abe7bfab Patch by Robert Schwebel, 13 May 2004:
Add 'imgextract' command: extract one part of a multi file image.
2004-06-09 10:15:00 +00:00
wdenk
547b4cb25e Patches by Jon Loeliger, 11 May 2004:
(partially, as they contained a lot of crap)
2004-06-09 00:51:50 +00:00
wdenk
97d80fc391 Patches Part 1 by Jon Loeliger, 11 May 2004:
Dynamically handle REV1 and REV2 MPC85xx parts.
  (Jon Loeliger, 10-May-2004).
New consistent memory map and Local Access Window across MPC85xx line.
New CCSRBAR at 0xE000_0000 now.
Add RAPID I/O memory map.
New memory map in README.MPC85xxads
  (Kumar Gala, 10-May-2004)
Better board and CPU identification on MPC85xx boards at boot.
  (Jon Loeliger, 10-May-2004)
SDRAM clock control fixes on MPC8540ADS & MPC8560 boards.
Some configuration options for MPC8540ADS & MPC8560ADS cleaned up.
  (Jim Robertson, 10-May-2004)
Rewrite of the MPC85xx Three Speed Ethernet Controller (TSEC) driver.
Supports multiple PHYs.
  (Andy Fleming, 10-May-2004)
Some README.MPC85xxads updates.
  (Kumar Gala, 10-May-2004)
Copyright updates for "Freescale"
  (Andy Fleming, 10-May-2004)
2004-06-09 00:34:46 +00:00
wdenk
6bdd1377af Patch by Stephen Williams, 11 May 2004:
Add flash support for ST M29W040B
Reduce JSE specific flash.c to remove dead code.
2004-06-09 00:15:33 +00:00
wdenk
356a0d9f31 Patch by Markus Pietrek, 04 May 2004:
Fix clear_bss code for ARM systems (all except s3c44b0 which
doesn't clear BSS at all?)
2004-06-09 00:10:59 +00:00
wdenk
1eaeb58e3c * Patch by Rishi Bhattacharya, 08 May 2004:
Add support for TI OMAP5912 OSK Board

* Patch by Sam Song May, 07 May 2004:
  Fix typo of UPM table for rmu board
2004-06-08 00:22:43 +00:00
wdenk
79fa88f3ed Patch by Pantelis Antoniou, 5 May 2004:
- Intracom board update.
- Add Codec POST.
2004-06-07 23:46:25 +00:00
wdenk
cea655a224 Add support for the second Ethernet interface for the 'PPChameleon' board. 2004-06-06 23:53:59 +00:00
wdenk
a56bd92289 * Patch by Dave Peverley, 30 Apr 2004:
Add support for OMAP730 Perseus2 Development board

* Patch by Alan J. Luse, 29 Apr 2004:
  Fix flash chip-select (OR0) option register setting on FADS boards.

* Patch by Alan J. Luse, 29 Apr 2004:
  Report MII network speed and duplex setting properly when
  auto-negotiate is not enabled.

* Patch by Jarrett Redd, 29 Apr 2004:
  Fix hang on reset on Ocotea board due to flash in wrong mode.
2004-06-06 23:13:55 +00:00
wdenk
5ca2679933 Patch by Dave Peverley, 29 Apr 2004:
add MAC address detection to smc91111 driver
2004-06-06 22:11:41 +00:00
wdenk
17ea117743 Patch by Tolunay Orkun, 20 Apr 2004:
- README update: add CONFIG_CSB272 and csb272_config
- add descriptions for some MII/PHY options, CONFIG_I2CFAST, and
  i2cfast environment variable
2004-06-06 21:51:03 +00:00
wdenk
1114257c9d Patch by Yuli Barcohen, 19 Apr 2004:
- Rename DUET_ADS to MPC885ADS
- Rename CONFIG_DUET to CONFIG_MPC885_FAMILY
- Rename CONFIG_866_et_al to CONFIG_MPC866_FAMILY
- Clean up FADS family port to use the new defines
2004-06-06 21:35:06 +00:00
wdenk
979bdbc70e Fix PCI support on CPC45 board 2004-06-01 21:08:17 +00:00
wdenk
e4cc71aa44 Patch by Scott McNutt, 25 Apr 2004:
Add Nios GDB/JTAG Console support:
- Add stubs to support gdb via JTAG.
- Add support for console over JTAG.
- Minor cleanup.
2004-05-19 21:33:14 +00:00
wdenk
10767ccb86 Add support for CATcenter board (based on PPChameleon ME module) 2004-05-13 13:23:58 +00:00
wdenk
02b11f8e09 Patch by Klaus Heydeck, 12 May 2004:
Using external watchdog for KUP4 boards in mpc8xx/cpu.c;
load_sernum_ethaddr() for KUP4 boards in lib_ppc/board.c;
various changes to KUP4 board specific files
2004-05-12 22:54:36 +00:00
wdenk
6c1362cf63 Fix minor network problem on MPC5200 2004-05-12 22:18:31 +00:00
wdenk
9d9e283790 Add some limited support for low-speed devices to SL811 USB controller
(at least "usb reset" now passes successfully and "usb info" displays
correct information)
2004-05-11 21:53:55 +00:00
wdenk
baac607c13 Change init sequence for multiple network interfaces: initialize
on-chip interfaces before external cards.
2004-05-08 20:33:20 +00:00
wdenk
32877d66aa * Fix memory leak in the NAND-specific JFFS2 code
* Fix SL811 USB controller when attached to a USB hub
2004-05-05 19:44:41 +00:00
wdenk
62b4ac98a4 * Fix config option spelling in PM520 config file
* Fix PHY discovery problem in cpu/mpc8xx/fec.c (introduced by
  patches by Pantelis Antoniou, 30 Mar 2004)
2004-05-05 08:31:53 +00:00
wdenk
2729af9d54 * Fix minor NAND JFFS2 related issue
* Fixes for SL811 USB controller:
  - implement workaround for broken memory stick
  - improve error handling

* Increase packet send timeout to 10 ms in cpu/mpc8xx/scc.c to better
  cope with congested networks.
2004-05-03 20:45:30 +00:00
wdenk
fc1cfcdb12 * Back out Patch by Christian Hohnstaedt, 23 Apr 2004:
(JFFS2 speed enhancements) because of using non-public
  data (PHYS_FLASH_SECT_SIZE)

* Patch by Travis Sawyer, 23 Apr 2004:
  Fix VSC/CIS 8201 phy descrambler interoperability timing due to
  errata from Vitesse Semiconductor.
2004-04-25 15:41:35 +00:00
wdenk
0b8fa03b6d * Patch by Christian Hohnstaedt, 23 Apr 2004:
JFFS2 speed enhancements:
  - repair header CRC calculation in jffs2_1pass.c
  - add eraseblock size to the partition information to skip empty
    eraseblocks if we find more then 4k of free space.
  - The JFFS2 scanner is now fast enough to remove the spinning wheel
    so #ifdef-ed out.
  - add watchdog calls in long running loops

* Patch by Philippe Robin, 22 Apr 2004:
  Fix ethernet configuration for "versatile" board

* Patch by Kshitij Gupta, 21 Apr 2004:
  Remove busy loop and use MPU timer fr usleep() on OMAP1510/1610 boards

* Patch by Steven Scholz, 24 Feb 2004:
  Fix a bug in AT91RM9200 ethernet driver:
  The MII interface is now initialized before accessing the PHY.

* Cleanup PCI ID's
2004-04-25 14:37:29 +00:00
wdenk
b9711de102 * Patch by John Kerl, 19 Apr 2004:
Use U-boot's miiphy.h for PHY register names, rather than
  introducing a new header file.

* Update pci_ids.h from linux-2.4.26

* Patch by Masami Komiya, 19 Apr 2004:
  Fix problem cause by VLAN function on little endian architecture
  without VLAN environment
2004-04-25 13:18:40 +00:00
wdenk
e9132ea94c Clean up the TQM8xx_YYMHz configurations; allow to use the same
binary image for all clock frequencies. Implement run-time
optimization of flash access timing based on the actual bus
frequency.
2004-04-24 23:23:30 +00:00
wdenk
5cf91d6bdc * Modify KUP4X board configuration to use SL811 driver for USB memory
sticks (including FAT / VFAT filesystem support)

* Add SL811 Host Controller Interface driver for USB

* Add CFG_I2C_EEPROM_ADDR_OVERFLOW desription to README

* Patch by Pantelis Antoniou, 19 Apr 2004:
  Allow to use shell style syntax (i. e. ${var} ) with standard parser.
  Minor patches for Intracom boards.

* Patch by Christian Pell, 19 Apr 2004:
  cleanup support for CF/IDE on PCMCIA for PXA25X
2004-04-23 20:32:05 +00:00
wdenk
e35745bb64 * Temporarily disabled John Kerl's extended MII command code because
"miivals.h" is missing

* Patches by Mark Jonas, 13 Apr 2004:
  - Remove CS0 chip select timing setting from cpu/mpc5xxx/start.S
  - Add sync instructions to IceCube SDRAM init code
  - Move SDRAM chip constants into seperate include files
  - Unify DDR and SDR initialization code
  - Unify all IceCube (Lite5xxx) target names
2004-04-18 23:32:11 +00:00
wdenk
2471111d35 * Patch by John Kerl, 16 Apr 2004:
Enable ranges in mii command, e.g. mii read 0-1f 0 or
  mii read 4-7 18-1a.  Also add mii dump subcommand for
  pretty-printing standard regs 0-5.

* Patch by  Stephen Williams, 16 April 2004:
  fix typo in JSE.h; update MAINTAINERS
2004-04-18 22:57:51 +00:00