Add support for the second Ethernet interface for the 'PPChameleon' board.

This commit is contained in:
wdenk 2004-06-06 23:53:59 +00:00
parent a56bd92289
commit cea655a224
6 changed files with 566 additions and 361 deletions

View File

@ -2,6 +2,9 @@
Changes since U-Boot 1.1.1:
======================================================================
* Add support for the second Ethernet interface for the 'PPChameleon'
board.
* Patch by Dave Peverley, 30 Apr 2004:
Add support for OMAP730 Perseus2 Development board

File diff suppressed because it is too large Load Diff

View File

@ -48,8 +48,8 @@
#include <405_mal.h>
#include <miiphy.h>
#if (defined(CONFIG_405GP) || defined(CONFIG_405EP) || defined(CONFIG_440)) \
&& !defined (CONFIG_NET_MULTI)
#if defined(CONFIG_405GP) || defined(CONFIG_405EP) || \
(defined(CONFIG_440) && !defined(CONFIG_NET_MULTI))
/***********************************************************/
/* Dump out to the screen PHY regs */
@ -78,6 +78,12 @@ void miiphy_dump (unsigned char addr)
/***********************************************************/
/* read a phy reg and return the value with a rc */
/* Note: We are referencing to EMAC_STACR register */
/* @(EMAC_BASE + 92) because of: */
/* - 405EP has only STACR for EMAC0 pinned out */
/* - 405GP has onle one EMAC0 */
/* - For 440 this module gets compiled only for */
/* !CONFIG_NET_MULTI, i.e. only EMAC0 is supported. */
/***********************************************************/
int miiphy_read (unsigned char addr, unsigned char reg,

View File

@ -35,7 +35,8 @@
+----------------------------------------------------------------------------*/
#ifndef _enetemac_h_
#define _enetemac_h_
#include <net.h>
#include <405_mal.h>
/*-----------------------------------------------------------------------------+
| General enternet defines. 802 frames are not supported.
@ -235,6 +236,60 @@ struct arp_entry {
/* all the errors we care about */
#define EMAC_RX_ERRORS 0x03FF
#define NUM_RX_BUFF PKTBUFSRX
#define NUM_TX_BUFF 1
#define MAX_ERR_LOG 10
typedef struct emac_stats_st{ /* Statistic Block */
int data_len_err;
int rx_frames;
int rx;
int rx_prot_err;
int int_err;
int pkts_tx;
int pkts_rx;
int pkts_handled;
short tx_err_log[MAX_ERR_LOG];
short rx_err_log[MAX_ERR_LOG];
} EMAC_STATS_ST, *EMAC_STATS_PST;
/* Structure containing variables used by the shared code (440gx_enet.c) */
typedef struct emac_440gx_hw_st {
uint32_t hw_addr; /* EMAC offset */
uint32_t tah_addr; /* TAH offset */
uint32_t phy_id;
uint32_t phy_addr;
uint32_t original_fc;
uint32_t txcw;
uint32_t autoneg_failed;
uint32_t emac_ier;
volatile mal_desc_t *tx;
volatile mal_desc_t *rx;
bd_t *bis; /* for eth_init upon mal error */
mal_desc_t *alloc_tx_buf;
mal_desc_t *alloc_rx_buf;
char *txbuf_ptr;
uint16_t devnum;
int get_link_status;
int tbi_compatibility_en;
int tbi_compatibility_on;
int fc_send_xon;
int report_tx_early;
int first_init;
int tx_err_index;
int rx_err_index;
int rx_slot; /* MAL Receive Slot */
int rx_i_index; /* Receive Interrupt Queue Index */
int rx_u_index; /* Receive User Queue Index */
int tx_slot; /* MAL Transmit Slot */
int tx_i_index; /* Transmit Interrupt Queue Index */
int tx_u_index; /* Transmit User Queue Index */
int rx_ready[NUM_RX_BUFF]; /* Receive Ready Queue */
int tx_run[NUM_TX_BUFF]; /* Transmit Running Queue */
int is_receiving; /* sync with eth interrupt */
int print_speed; /* print speed message upon start */
EMAC_STATS_ST stats;
} EMAC_405_HW_ST, *EMAC_405_HW_PST;
/*-----------------------------------------------------------------------------+
| Function prototypes for device table.

View File

@ -77,10 +77,12 @@
#undef CONFIG_EXT_PHY
#define CONFIG_NET_MULTI 1
#define CONFIG_MII 1 /* MII PHY management */
#ifndef CONFIG_EXT_PHY
#define CONFIG_PHY_ADDR 1 /* PHY address */
#define CONFIG_PHY_ADDR 0 /* EMAC0 PHY address */
#define CONFIG_PHY1_ADDR 1 /* EMAC1 PHY address */
#else
#define CONFIG_PHY_ADDR 2 /* PHY address */
#endif

View File

@ -132,9 +132,10 @@
#define UIC_MAL_RXEOB 0x00080000 /* MAL RXEOB */
#define UIC_MAL_TXDE 0x00040000 /* MAL TXDE */
#define UIC_MAL_RXDE 0x00020000 /* MAL RXDE */
#define UIC_ENET 0x00010000 /* Ethernet */
#define UIC_ENET 0x00010000 /* Ethernet0 */
#define UIC_ENET1 0x00004000 /* Ethernet1 on 405EP */
#define UIC_ECC_CE 0x00004000 /* ECC Correctable Error on 405GP */
#define UIC_EXT_PCI_SERR 0x00008000 /* External PCI SERR# */
#define UIC_ECC_CE 0x00004000 /* ECC Correctable Error */
#define UIC_PCI_PM 0x00002000 /* PCI Power Management */
#define UIC_EXT0 0x00000040 /* External interrupt 0 */
#define UIC_EXT1 0x00000020 /* External interrupt 1 */
@ -582,8 +583,11 @@
#define malrxdeir (MAL_DCR_BASE+0x13) /* RX Descr. Error Int reg */
#define maltxctp0r (MAL_DCR_BASE+0x20) /* TX 0 Channel table pointer reg */
#define maltxctp1r (MAL_DCR_BASE+0x21) /* TX 1 Channel table pointer reg */
#define maltxctp2r (MAL_DCR_BASE+0x22) /* TX 2 Channel table pointer reg */
#define malrxctp0r (MAL_DCR_BASE+0x40) /* RX 0 Channel table pointer reg */
#define malrxctp1r (MAL_DCR_BASE+0x41) /* RX 1 Channel table pointer reg */
#define malrcbs0 (MAL_DCR_BASE+0x60) /* RX 0 Channel buffer size reg */
#define malrcbs1 (MAL_DCR_BASE+0x61) /* RX 1 Channel buffer size reg */
/*-----------------------------------------------------------------------------
| IIC Register Offsets