Patch by Gary Jennejohn, 09 Sep 2004:

allow to use USART1 as console port on at91rm9200dk boards

CHANGELOG

@@ -2,6 +2,9 @@
 Changes since U-Boot 1.1.1:
 ======================================================================
 
+* Patch by Gary Jennejohn, 09 Sep 2004:
+  allow to use USART1 as console port on at91rm9200dk boards
+
 * Patch by Stefan Roese, 16 Sep 2004:
   Update AR405 board.
 

cpu/at91rm9200/cpu.c

@@ -35,6 +35,10 @@
 #include <asm/io.h>
 #include <asm/arch/hardware.h>
 
+#if !defined(CONFIG_DBGU) && !defined(CONFIG_USART1)
+#error must define one of CONFIG_DBGU or CONFIG_USART1
+#endif
+
 /* read co-processor 15, register #1 (control register) */
 static unsigned long read_p15_c1(void)
 {
@@ -116,7 +120,12 @@ int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
     disable_interrupts();
     reset_cpu(0);
 #else
+#ifdef CONFIG_DBGU
+   AT91PS_USART us = AT91C_BASE_DBGU;
+#endif
+#ifdef CONFIG_USART1
    AT91PS_USART us = AT91C_BASE_US1;
+#endif
    AT91PS_PIO pio = AT91C_BASE_PIOA;
 
    /*shutdown the console to avoid strange chars during reset */

cpu/at91rm9200/serial.c

@@ -33,8 +33,17 @@
 #include <asm/io.h>
 #include <asm/arch/hardware.h>
 
+#if !defined(CONFIG_DBGU) && !defined(CONFIG_USART1)
+#error must define one of CONFIG_DBGU or CONFIG_USART1
+#endif
+
 /* ggi thunder */
+#ifdef CONFIG_DBGU
 AT91PS_USART us = (AT91PS_USART) AT91C_BASE_DBGU;
+#endif
+#ifdef CONFIG_USART1
+AT91PS_USART us = (AT91PS_USART) AT91C_BASE_US1;
+#endif
 
 void serial_setbrg (void)
 {
@@ -49,8 +58,14 @@ void serial_setbrg (void)
 int serial_init (void)
 {
 	/* make any port initializations specific to this port */
+#ifdef CONFIG_DBGU
 	*AT91C_PIOA_PDR = AT91C_PA31_DTXD | AT91C_PA30_DRXD;	/* PA 31 & 30 */
 	*AT91C_PMC_PCER = 1 << AT91C_ID_SYS;	/* enable clock */
+#endif
+#ifdef CONFIG_USART1
+	*AT91C_PIOB_PDR = AT91C_PB21_TXD1 | AT91C_PB20_RXD1;
+	*AT91C_PMC_PCER |= 1 << AT91C_ID_USART1;	/* enable clock */
+#endif
 	serial_setbrg ();
 
 	us->US_CR = AT91C_US_RSTRX | AT91C_US_RSTTX;

include/asm-arm/arch-at91rm9200/AT91RM9200.h

@@ -447,6 +447,7 @@ typedef struct _AT91S_PDC {
 #define AT91C_SPI_CSR   ((AT91_REG *) 	0xFFFE0030) /* (SPI) Chip Select Register */
 #define AT91C_PMC_PCER  ((AT91_REG *) 	0xFFFFFC10) /* (PMC) Peripheral Clock Enable Register */
 #define AT91C_PIOA_PDR  ((AT91_REG *) 	0xFFFFF404) /* (PIOA) PIO Disable Register */
+#define AT91C_PIOB_PDR  ((AT91_REG *) 	0xFFFFF604) /* (PIOB) PIO Disable Register */
 
 #define AT91C_PIO_PA30       ((unsigned int) 1 << 30) /* Pin Controlled by PA30 */
 #define AT91C_PIO_PC0        ((unsigned int) 1 <<  0) /* Pin Controlled by PC0 */
@@ -454,6 +455,10 @@ typedef struct _AT91S_PDC {
 #define AT91C_PA30_DRXD     ((unsigned int) AT91C_PIO_PA30) /*  DBGU Debug Receive Data */
 #define AT91C_PIO_PA31       ((unsigned int) 1 << 31) /* Pin Controlled by PA31 */
 #define AT91C_PA31_DTXD     ((unsigned int) AT91C_PIO_PA31) /*  DBGU Debug Transmit Data */
+#define AT91C_PIO_PB20       ((unsigned int) 1 << 20) /* Pin Controlled by PB20 */
+#define AT91C_PB20_RXD1     ((unsigned int) AT91C_PIO_PB20) /*  USART1 Receive Data */
+#define AT91C_PIO_PB21       ((unsigned int) 1 << 21) /* Pin Controlled by PB21 */
+#define AT91C_PB21_TXD1     ((unsigned int) AT91C_PIO_PB21) /*  USART1 Transmit Data */
 
 #define AT91C_ID_SYS    ((unsigned int)  1) /* System Peripheral */
 #define AT91C_ID_TC0    ((unsigned int) 17) /* Timer Counter 0 */
@@ -461,6 +466,7 @@ typedef struct _AT91S_PDC {
 #define AT91C_ID_SPI    ((unsigned int) 13) /* Serial Peripheral Interface */
 #define AT91C_ID_PIOB	((unsigned int) 3)
 #define AT91C_ID_PIOC	((unsigned int) 4)
+#define AT91C_ID_USART1	((unsigned int) 7)
 
 #define AT91C_PIO_PC1        ((unsigned int) 1 <<  1) /* Pin Controlled by PC1 */
 #define AT91C_PC1_BFRDY_SMOE ((unsigned int) AT91C_PIO_PC1) /*  Burst Flash Ready */

include/configs/at91rm9200dk.h

@@ -58,6 +58,10 @@
  * Hardware drivers
  */
 
+/* define one of these to choose the DBGU or USART1 as console */
+#define CONFIG_DBGU
+#undef CONFIG_USART1
+
 #undef	CONFIG_HWFLOW			/* don't include RTS/CTS flow control support	*/
 
 #undef	CONFIG_MODEM_SUPPORT		/* disable modem initialization stuff */