Mirrors the logic for dcn30. Cue lots of WARNs and some
kernel panics without this fix.
Signed-off-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It calls populate_dml_pipes which uses doubles to initialize the
scale_ratio_depth params. Mirrors the dcn20 logic.
Signed-off-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In calculate_bandwidth(), the tag free_sclk and free_yclk are reversed,
which could lead to a memory leak of yclk.
Fix this bug by changing the location of free_sclk and free_yclk.
This bug was found by a static analyzer.
Builds with 'make allyesconfig' show no new warnings,
and our static analyzer no longer warns about this code.
Fixes: 2be8989d0f ("drm/amd/display/dc/calcs/dce_calcs: Move some large variables from the stack to the heap")
Signed-off-by: Zhou Qingyang <zhou1615@umn.edu>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
A porting error resulted in the stream assignment for the link
being retained without being released - a memory leak.
[How]
Fix the porting error by adding back the dc_stream_release() intended
as part of the original patch.
Fixes: 0bb2455585 ("drm/amd/display: retain/release at proper places in link_enc assignment")
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
To help triage issues and coordinate driver/bios release dependency
[How]
Only enable the new Z9 interface when debug option is set, otherwise
treat Z10 only support case as Zstate disallowed.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Eric Yang <Eric.Yang2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
psr_feature_enabled flag is dynamically updated, and sometimes when
zstate allow status is determined the flag has not been set to true yet
even on PSR enabled config, lid off/on is such a case, which will result
in zstate disabled even though PSR is supported.
[How]
Check the supported PSR version and the PSR disable status instead.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Eric Yang <Eric.Yang2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[How & Why]
Disable physym clock when it's not in use.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Eric Yang <Eric.Yang2@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: David Galiffi <David.Galiffi@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[How & Why]
Updated procedure to match hardware programming guide.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Eric Yang <Eric.Yang2@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: David Galiffi <David.Galiffi@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
There is a change previously to disallow DM to set dp drive setings when
stream is not present. The logic might not work well with DP PHY
complaince scenario with a PHY test fixture attachment. We need to make
the method allow DP link drive settings changes even without stream
attached to it.
[how]
revert back to previous code in set drive setting function then add an
empty link_resource structure, then assign link resource based on
current link resource if link resource is allocated to the current pipe.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Wayne Lin <Wayne.Lin@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This version brings along the following fixes:
- Z9 improvements
- Clocks management adjustments
- Code cleanup
- Improve DSC and MST code
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Due to bad hardware, the PHY repeater count in LTTPR cap is read as 0xFF
in some monitors while the LTTPR is actually present.
[how]
Remove PHY repeater counter check when configuring LTTPR mode.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Sung Joon Kim <sungkim@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
indirect register index/data pair may be used by multi-threads. when it
happens, it would cause register access issue that is hard to trace.
[How]
Using cgs service, which provide a sync indirect reg access api.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Roy Chan <roy.chan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why/How]
We need to handle cable capabilities for cables that support cable ID.
The cable attributes are intersected with the verified link caps to
determine appropriate max link rate. After determining cable attributes
we update the DP receiver.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: George Shen <George.Shen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Prepare for future dm can have different implementation depends on the
return value.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Ian Chen <ian.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
DMCUB will hang if we send a PSR unsupported set version command.
This can occur if we fall-through into the default case in the switch
statement for PSR version.
[How]
Add an unsupported check after the switch statement.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY?]
SKUs that contain an unused eDP connector will throw an error when no
display is connected.
[HOW?]
Change error to a warning.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Martin Leung <Martin.Leung@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Dillon Varone <divarone@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Implement handling for escape call to query the MCLK switch support for
the current display config.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Increase width of some variables to avoid comparing integers of
different widths
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Josip Pavic <Josip.Pavic@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Link encoders are created based on its engine ID. The position of a link
encoder in an array could be null since it didn't be allocated. Current
matching logic didn't consider this situation and could get null
encoder.
[How]
To add null encoder check to make the matching logic can go to next to
get a valid one.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Martin Tsai <martin.tsai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
There is a recent refactor that contains a typo to cause set throttled
vcp size skipped for dpia link. The change is to fix this typo so it won't cause
black screen
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
This is internal to dc so we don't have to add a prefix to indicate it
is dc link_hwss instead someone else link_hwss.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
as we add more link_hwss we are making a generic way to determine which type
of link_hwss we should use.
Later on we may think of introduce a link policy layer. it could be a thin layer
that decide the type of link_hwss we use. So instead of passing in link and link_res
we can just pass in link_policy and swtich based on link_policy->get_link_hwss_type.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Current we have hundreds of if/else or switch statement to check
encoder type in dc_link level. The reason is because depending
on the type of encoder dc_link needs to perform similar programming
task but with different encoder interfaces. The story is to abstract
these interfaces so dc_link can just perform the programming task
without knowing the detail of which encoder it's dealing with.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
DCN guard is not necessary for DP2.x relevant logic.
Drop them.
v2: squash in fix for misplaced #endif (Alex)
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Reviewed-by: Jerry Zuo <Jerry.Zuo@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
According to the USB4 specification, FEC and DSC should be disabled
when a USB4 DPIA operates in TBT3 compatibility mode.
[How]
Upon detecting that a USB4 DPIA is connected to a device that is known
to operate in TBT3 mode, disable FEC and DSC support if they have been
reported by the TBT3 device.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Meenakshikumar Somasundaram <Meenakshikumar.Somasundaram@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Jimmy Kizito <Jimmy.Kizito@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
dc_link_detect_helper has multiple purpose:
1. Detect link and local sink.
2. Verify link capability by performing detection link training.
3. Start mst topology discovery and if succeeded fails the current interface.
This is difficult to maintain as item 2 has become more destructive to current
dc state. The change is to decouple these sequences to its own functions.
Eventually only item 2 is a destructive method and we will redesign this
sequence with a more unified policy across different encoder types.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Chris Park <Chris.Park@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Some architectures (e.g., ARM) throw an compilation error if the
udelay is too long. In general udelays of longer than 2000us are
not recommended on any architecture. Switch to msleep in these
cases.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Some architectures (e.g., ARM) have relatively low udelay limits.
On most architectures, anything longer than 2000us is not recommended.
Change the check to align with other similar checks in DC.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
During resume path, dpcd_set_source_specific_data is taking
extra time when core_link_write_dpcd fails on DP_SOURCE_OUI+0x03
and DP_SOURCE_MINIMUM_HBLANK_SUPPORTED. Here,aux->transfer fails
with multiple retries and consume significant amount time during
S0i3 resume.
[How]
Not to call dpcd_set_source_specific_data during resume path
when there is no oled panel connected and achieve faster resume
during S0i3.
Reviewed-by: Hersen Wu <hersenxs.wu@amd.com>
Signed-off-by: Rajib Mahapatra <rajib.mahapatra@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Unused. Convert the divisions into asserts on the divisor, to
debug why it is zero. The divide by zero is suspected of causing
kernel panics.
While I have no idea where the zero is coming from I think this
patch is a positive either way.
Cc: stable@vger.kernel.org
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Mirrors the logic for dcn30. Cue lots of WARNs and some
kernel panics without this fix.
Cc: stable@vger.kernel.org
Signed-off-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It calls populate_dml_pipes which uses doubles to initialize the
scale_ratio_depth params. Mirrors the dcn20 logic.
Cc: stable@vger.kernel.org
Signed-off-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In calculate_bandwidth(), the tag free_sclk and free_yclk are reversed,
which could lead to a memory leak of yclk.
Fix this bug by changing the location of free_sclk and free_yclk.
This bug was found by a static analyzer.
Builds with 'make allyesconfig' show no new warnings,
and our static analyzer no longer warns about this code.
Fixes: 2be8989d0f ("drm/amd/display/dc/calcs/dce_calcs: Move some large variables from the stack to the heap")
Signed-off-by: Zhou Qingyang <zhou1615@umn.edu>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Some architectures (e.g., ARM) throw an compilation error if the
udelay is too long. In general udelays of longer than 2000us are
not recommended on any architecture. Switch to msleep in these
cases.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Some architectures (e.g., ARM) have relatively low udelay limits.
On most architectures, anything longer than 2000us is not recommended.
Change the check to align with other similar checks in DC.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
FIFO reset is only necessary for fast boot sequence, where otg is disabled
and dig fe is enabled when changing dispclk. Fast boot is only enabled
on embedded displays.
[How]
Change FIFO reset condition to "embedded display only".
Signed-off-by: Zhan Liu <zhan.liu@amd.com>
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
DCN301 has seamless boot enabled. With MPC split enabled
at the same time, system will hang.
[How]
Revert MPC split policy back to "MPC_SPLIT_AVOID". Since we have
ODM combine enabled on DCN301, pipe split is not necessary here.
Signed-off-by: Zhan Liu <zhan.liu@amd.com>
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
During otg sync trigger, plane states are used to decide whether the otg
is already synchronized or not. There are scenarions when otgs are
disabled without plane state getting disabled and in such case the otg is
excluded from synchronization.
[How]
Introduced pipe_idx_syncd in pipe_ctx that tracks each otgs master pipe.
When a otg is disabled/enabled, pipe_idx_syncd is reset to itself.
On sync trigger, pipe_idx_syncd is checked to decide whether a otg is
already synchronized and the otg is further included or excluded from
synchronization.
v2:
Don't drop is_blanked logic
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Reviewed-by: Mustapha Ghaddar <mustapha.ghaddar@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: meenakshikumar somasundaram <meenakshikumar.somasundaram@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Cc: torvalds@linux-foundation.org
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
amdgpu:
- SR-IOV fix
- VCN harvest fix
- Suspend/resume fixes
- Tahiti fix
- Enable GPU recovery on yellow carp
radeon:
- Fix error handling regression in radeon_driver_open_kms
i915:
- Update EHL display voltage swing table
- Fix programming the ADL-P display TC voltage swing
-----BEGIN PGP SIGNATURE-----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=cNda
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2022-01-21' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"Thanks to Daniel for taking care of things while I was out, just a set
of merge window fixes that came in this week, two i915 display fixes
and a bunch of misc amdgpu, along with a radeon regression fix.
amdgpu:
- SR-IOV fix
- VCN harvest fix
- Suspend/resume fixes
- Tahiti fix
- Enable GPU recovery on yellow carp
radeon:
- Fix error handling regression in radeon_driver_open_kms
i915:
- Update EHL display voltage swing table
- Fix programming the ADL-P display TC voltage swing"
* tag 'drm-next-2022-01-21' of git://anongit.freedesktop.org/drm/drm:
drm/radeon: fix error handling in radeon_driver_open_kms
drm/amd/amdgpu: fixing read wrong pf2vf data in SRIOV
drm/amdgpu: apply vcn harvest quirk
drm/i915/display/adlp: Implement new step in the TC voltage swing prog sequence
drm/i915/display/ehl: Update voltage swing table
drm/amd/display: Revert W/A for hard hangs on DCN20/DCN21
drm/amdgpu: drop flags check for CHIP_IP_DISCOVERY
drm/amdgpu: Fix rejecting Tahiti GPUs
drm/amdgpu: don't do resets on APUs which don't support it
drm/amdgpu: invert the logic in amdgpu_device_should_recover_gpu()
drm/amdgpu: Enable recovery on yellow carp
[Why]
FIFO reset is only necessary for fast boot sequence, where otg is disabled
and dig fe is enabled when changing dispclk. Fast boot is only enabled
on embedded displays.
[How]
Change FIFO reset condition to "embedded display only".
Signed-off-by: Zhan Liu <zhan.liu@amd.com>
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
DCN301 has seamless boot enabled. With MPC split enabled
at the same time, system will hang.
[How]
Revert MPC split policy back to "MPC_SPLIT_AVOID". Since we have
ODM combine enabled on DCN301, pipe split is not necessary here.
Signed-off-by: Zhan Liu <zhan.liu@amd.com>
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The calcs folder has FPU code on it, which should be isolated inside the
DML folder as per https://patchwork.freedesktop.org/series/93042/.
This commit aims single-handedly to correct the location of such FPU
code and does not refactor any functions.
Changes since v2:
- Corrected problems to compile when DCN was disabled.
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Isabella Basso <isabbasso@riseup.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This version brings along following fixes:
- Organize FPU associated code to DML
- Modify SMU_TIMEOUT macro
- Organize dcn201 code
- Address DS stays disabled problem under specific scenario
- Fix black screen issue
- Update DML to rev.99
- Address problem of eDP hot-plug feature
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
For allow eDP hot-plug feature, the stream signal may change to VIRTUAL
when plug-out and back to eDP when plug-in. OS will still setPathMode
with same timing for each plugging, but eDP gets no stream update as we
don't check signal type changing back as keeping it VIRTUAL. It's also
unsafe for future cases that stream signal is switched with same timing.
[How]
Check stream signal type change include previous HDMI signal case.
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Dale Zhao <dale.zhao@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
1. update dml to rev.99
2. add smu clk table w/a: smu gives 1 dtm level with mismatch votage
table which causes multiple issues.
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
With some monitors when multi plane overlay is enabled the memory
clock switching mechanism has to change and, due to an error in the
initialization sequence, it may cause a black screen.
[HOW]
Change the firmware assisted memory clock switch initialization and
tear-down sequence utilizing the prepare_bandwidth and
optimize_bandwidth contexts.
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Felipe Clark <feclark@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
On HG APU + dGPU scenario with no display to dGPU,
DS stays disabled due to no display present.
This problem can be worked around by DAL calling
DCEFCLK DS message to SMU on clk init.
[How]
Call DCEFCLK DS message to SMU on clk init.
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Chris Park <Chris.Park@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
If some SMU features are not enabled, SMU will return fail to that
message.
[HOW]
SMU_TIMEOUT macro will treat "return fail" as timeout also.
Correct the macro to only report timeout case.
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Ian Chen <ian.chen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
As part of the FPU isolation work documented in
https://patchwork.freedesktop.org/series/93042/, isolate
code that uses FPU in DCN302 to DML, where all FPU code
should locate.
Co-authored-by: Jasdeep Dhillon <jdhillon@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Jasdeep Dhillon <jdhillon@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This version brings improvements in the following:
- Drop unnecessary DCN guards
- Improve Z9 interface
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Need to disable Z9 on configurations that only support Z10
[How]
Support new PMFW interface to disable Z9
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Eric Yang <Eric.Yang2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
- We only ever want seamless boots on eDPs
- The naming and logic did not match the context
[HOW]
- Removed unnecessary if statements
- Renamed power_down_display_on_boot to seamless_boot_edp_requested and
swapped the logic
Reviewed-by: Martin Leung <Martin.Leung@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Jarif Aftab <jaraftab@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drivers fixes:
- i915 fixes for ttm backend + one pm wakelock fix
- amdgpu fixes, fairly big pile of small things all over. Note this
doesn't yet containe the fixed version of the otg sync patch that
blew up
- small driver fixes: meson, sun4i, vga16fb probe fix
drm core fixes:
- cma-buf heap locking
- ttm compilation
- self refresh helper state check
- wrong error message in atomic helpers
- mipi-dbi buffer mapping
-----BEGIN PGP SIGNATURE-----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=h74X
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2022-01-14' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Daniel Vetter:
"drivers fixes:
- i915 fixes for ttm backend + one pm wakelock fix
- amdgpu fixes, fairly big pile of small things all over. Note this
doesn't yet containe the fixed version of the otg sync patch that
blew up
- small driver fixes: meson, sun4i, vga16fb probe fix
drm core fixes:
- cma-buf heap locking
- ttm compilation
- self refresh helper state check
- wrong error message in atomic helpers
- mipi-dbi buffer mapping"
* tag 'drm-next-2022-01-14' of git://anongit.freedesktop.org/drm/drm: (49 commits)
drm/mipi-dbi: Fix source-buffer address in mipi_dbi_buf_copy
drm: fix error found in some cases after the patch d1af5cd86997
drm/ttm: fix compilation on ARCH=um
dma-buf: cma_heap: Fix mutex locking section
video: vga16fb: Only probe for EGA and VGA 16 color graphic cards
drm/amdkfd: Fix ASIC name typos
drm/amdkfd: Fix DQM asserts on Hawaii
drm/amdgpu: Use correct VIEWPORT_DIMENSION for DCN2
drm/amd/pm: only send GmiPwrDnControl msg on master die (v3)
drm/amdgpu: use spin_lock_irqsave to avoid deadlock by local interrupt
drm/amdgpu: not return error on the init_apu_flags
drm/amdkfd: Use prange->update_list head for remove_list
drm/amdkfd: Use prange->list head for insert_list
drm/amdkfd: make SPDX License expression more sound
drm/amdkfd: Check for null pointer after calling kmemdup
drm/amd/display: invalid parameter check in dmub_hpd_callback
Revert "drm/amdgpu: Don't inherit GEM object VMAs in child process"
drm/amd/display: reset dcn31 SMU mailbox on failures
drm/amdkfd: use default_groups in kobj_type
drm/amdgpu: use default_groups in kobj_type
...
The WA from commit 2a50edbf10 ("drm/amd/display: Apply w/a for hard hang
on HPD") and commit 1bd3bc745e ("drm/amd/display: Extend w/a for hard
hang on HPD to dcn20") causes a regression in s0ix where the system will
fail to resume properly on many laptops. Pull the workarounds out to
avoid that s0ix regression in the common case. This HPD hang happens with
an external device in special circumstances and a new W/A will need to be
developed for this in the future.
Cc: Qingqing Zhuo <qingqing.zhuo@amd.com>
Reported-by: Scott Bruce <smbruce@gmail.com>
Reported-by: Chris Hixon <linux-kernel-bugs@hixontech.com>
Reported-by: spasswolf@web.de
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215436
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/1821
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/1852
Fixes: 2a50edbf10 ("drm/amd/display: Apply w/a for hard hang on HPD")
Fixes: 1bd3bc745e ("drm/amd/display: Extend w/a for hard hang on HPD to dcn20")
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The WA from commit 2a50edbf10 ("drm/amd/display: Apply w/a for hard hang
on HPD") and commit 1bd3bc745e ("drm/amd/display: Extend w/a for hard
hang on HPD to dcn20") causes a regression in s0ix where the system will
fail to resume properly on many laptops. Pull the workarounds out to
avoid that s0ix regression in the common case. This HPD hang happens with
an external device in special circumstances and a new W/A will need to be
developed for this in the future.
Cc: stable@vger.kernel.org
Cc: Qingqing Zhuo <qingqing.zhuo@amd.com>
Reported-by: Scott Bruce <smbruce@gmail.com>
Reported-by: Chris Hixon <linux-kernel-bugs@hixontech.com>
Reported-by: spasswolf@web.de
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215436
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/1821
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/1852
Fixes: 2a50edbf10 ("drm/amd/display: Apply w/a for hard hang on HPD")
Fixes: 1bd3bc745e ("drm/amd/display: Extend w/a for hard hang on HPD to dcn20")
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
dpg_width is being initialized to width but this is never read
as dpg_width is overwritten later on. Remove the redundant
initialization.
Cleans up the following clang-analyzer warning:
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_link_dp.c:6020:8:
warning: Value stored to 'dpg_width' during its initialization is never
read [clang-analyzer-deadcode.DeadStores].
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Otherwise future commands may fail as well leading to downstream
problems that look like they stemmed from a timeout the first time
but really didn't.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit a896f870f8.
It causes odd flickering on my Radeon RX580 (PCI ID 1002:67df rev e7,
subsystem ID 1da2:e353).
Bisected right to this commit, and reverting it fixes things.
Link: https://lore.kernel.org/all/CAHk-=wg9hDde_L3bK9tAfdJ4N=TJJ+SjO3ZDONqH5=bVoy_Mzg@mail.gmail.com/
Cc: Alex Deucher <alexdeucher@gmail.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Dave Airlie <airlied@gmail.com>
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Jun Lei <Jun.Lei@amd.com>
Cc: Mustapha Ghaddar <mustapha.ghaddar@amd.com>
Cc: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Cc: meenakshikumar somasundaram <meenakshikumar.somasundaram@amd.com>
Cc: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
[Why]
To maintain compatibility with firmware older than 4.0.11.
Those firmware may have interrmittent hangs with RDCSPIPE or the PHY,
but we shouldn't regress their previous behavior.
[How]
Use the new path if firmware is development or 4.0.11 or newer. Use the
legacy path otherwise.
Fixes: 41f91315b5 ("drm/amd/display: Query DMCUB for dp alt status")
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Hansen Dsouza <hansen.dsouza@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
driver missed the check.
[how]
add the check.
add min display clock = 100mhz check based on dccg doc.
[note]
add SetPhyclkVoltageByFreq as confirmed with smu, but not enabled in
this change.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
1. Current code hard codes link to PHY mapping in dc link level per asic
per revision.
This is not scalable. In long term the mapping will be obatined from
DMUB and store in dc resource.
2. Depending on DCN revision and endpoint type, the definition of
dio_output_idx dio_output_type and phy_idx are not consistent. We need
to unify the meaning of these hardware indices across different system
configuration.
[how]
1. Temporarly move the hardcoded mapping to dc_resource level, which
should have full awareness of asic specific configuration and add a TODO
comment to move the mapping to DMUB.
2. populate dio_output_idx/phy_idx for all configuration, define
usb4_enabled bit instead of dio_output_type as an external enum.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Eric Yang <Eric.Yang2@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Depend on res_pool->res_cap->num_timing_generator to query timing
gernerator information, it would case underflow at the fused display
pipes case.
Due to the res_pool->res_cap->num_timing_generator records default
timing generator resource built in driver, not the current chip.
[How]
Some ASICs would be fused display pipes less than the default setting.
In dcnxx_resource_construct function, driver would obatin real timing
generator count and store it into res_pool->timing_generator_count.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Yi-Ling Chen <Yi-Ling.Chen2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The "plane_state" pointer was access before checking if it was NULL.
Avoid a possible NULL pointer dereference by accessing the plane
address after the check.
Addresses-Coverity-ID: 1493892 ("Dereference before null check")
Fixes: 3f68c01be9 ("drm/amd/display: add cyan_skillfish display support")
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In function enable_stream_features(), the variable "old_downspread.raw"
could be uninitialized if core_link_read_dpcd() fails, however, it is
used in the later if statement, and further, core_link_write_dpcd()
may write random value, which is potentially unsafe.
Fixes: 6016cd9dba ("drm/amd/display: add helper for enabling mst stream features")
Cc: stable@vger.kernel.org
Signed-off-by: Yizhuo Zhai <yzhai003@ucr.edu>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
When reboot the link res map should be persisted. So during boot up,
driver will look at the map to determine which link should take priority
to use certain link res. This is to ensure that link res remains
unshuffled after a reboot.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
When there are more DP2.0 RXs connected than the number HPO DP link
encoders we have, we need to dynamically allocate HPO DP link encoder to
the port that needs it.
[how]
Only allocate HPO DP link encoder when it is needed.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Update all accesses to use hpo dp link encoder through link resource
only.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
This commit is to populate link res in preparation of the next commit.
The next commit will replace all existing code to use link res instead
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
There will be a series of re-arch changes in Link Resource Management.
They are more and more muxable link resource objects and the resource is
insufficient for a one to one allocation to all links created.
Therefore a link resource sharing logic is required to determine which
link should use certain link resource.
This commit is the first one in this series that starts by defining a
link resource struct, this struct will be available to all interfaces
that need to perform link programming sequence.
In later commits, we will granduately decouple link resource objects out
of dc link. So instead of access a link resource from dc link. Current
link's resource can be accessible through pipe_ctx->link_res during
commit, or by calling dc_link_get_cur_link_res function with current
link passed in after commit.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This version brings along the following:
- Fixes and improvements in the LTTPR code
- Improve z-state
- Fix null pointer check
- Improve communication with s0i2
- Update multiple-display split policy
- Add missing registers
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
These registers are currently missing from the DCN303 header files
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: George Shen <George.Shen@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
We'll exit optimized power state to do link detection but we won't enter
back into the optimized power state.
This could potentially block s2idle entry depending on the sequencing,
but it also means we're losing some power during the transition period.
[How]
Hook up the handler like DCN21. It was also missed like the
exit_optimized_pwr_state callback.
Fixes: 64b1d0e8d5 ("drm/amd/display: Add DCN3.1 HWSEQ")
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Eric Yang <Eric.Yang2@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
DP spec specifies that DPRX shall use the read interval in the
TRAINING_AUX_RD_INTERVAL_PHY_REPEATER LTTPR DPCD register. This
register's bit definition is the same as the AUX read interval register
for DPRX.
[How}
Remove logic which forces AUX read interval to 100us for repeaters when
in LTTPR non-transparent mode.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Wesley Chalmers <wesley.chalmers@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: George Shen <George.Shen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Otherwise SMU won't mark Display as idle when trying to perform s2idle.
[How]
Mark the bit in the dcn31 codepath, doesn't apply to older ASIC.
It needed to be split from phy refclk off to prevent entering s2idle
when PSR was engaged but driver was not ready.
Fixes: 118a331516 ("drm/amd/display: Add DCN3.1 clock manager support")
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Eric Yang <Eric.Yang2@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The change of setting a timer callback on boot for 10 seconds is still
working, just lacked power down for DCN10.
[How]
Added power down for DCN10.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Derek Lai <Derek.Lai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Stutter period won't be less than 5000.0, but if PSR is enabled then we
can potentially enter Z9 when MPO is enabled.
SMU will try to enter Z9 too early in these cases (before PSR is
enabled) and we'll see underflow.
[How]
Block z-states (z9, z10) until we can add a new interface to SMU to
signal when we can support z10 but not z9.
We can revert this once the interface change is in.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Eric Yang <Eric.Yang2@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Current implementation is not scalable and retrofits the existing
standard link training code for purposes outside of its original design.
[How]
Refactor vendor specific link training sequence into its own separate
function to be called instead of the standard link training function.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: George Shen <George.Shen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Max link rate should be limited to the maximum link rate support by any
LTTPR that are connected, including when operating in transparent mode.
[How]
Include transparent mode when factoring in LTTPR max supported link
rate.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Wesley Chalmers <wesley.chalmers@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: George Shen <George.Shen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
B0 PHY C map to F, D map to G driver use logic instance, dmub does the
remap. Driver still need use the right PHY instance to access right HW.
[how]
use phyical instance when program PHY register.
[note]
could move resync_control programming to dmub next.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
A porting error on a previous patch left the block of code that
causes the crash from a NULL pointer dereference.
More specifically, we try to access link_enc before it's assigned in
the USB4 case in the following assignment:
config.dio_output_idx = link_enc->transmitter - TRANSMITTER_UNIPHY_A;
[How]
That assignment occurs later depending on the ASIC version. It's only
needed on DCN31 and only after link_enc is already assigned.
Fixes: 986430446c ("drm/amd/display: fix a crash on USB4 over C20 PHY")
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
why:
Need interface to lower clocks when in dc (power save)
mode. Must be able to work with p_state unsupported cases
Can cause flicker when OS notifies us of dc state change
how:
added dal3 interface for KMD
added pathway to query smu for this softmax
added blank before clock change to override underflow
added logic to change clk based on pstatesupport and softmax
added logic in prepare/optimize_bw to conform while changing
clocks
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Pavle Kotarac <Pavle.Kotarac@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Martin Leung <Martin.Leung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
For ODM + MPO window on one half of ODM, only 3 pipes should
be allocated and scaling parameters adjusted to handle this case
[How]
Fix pipe allocation when MPO viewport is only on one side of ODM
split, and modify scaling paramters.
Added diags test cases for ODM + windows MPO, where MPO window is
on right half, left half, and both halves or ODM.
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Pavle Kotarac <Pavle.Kotarac@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Eric Bernstein <eric.bernstein@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
This workaround resolves underflow caused by incorrect DST_Y_PREFETCH.
Overriding to 192KB DET buf size until the DST_Y_PREFETCH calc is fixed.
Reviewed-by: Eric Yang <Eric.Yang2@amd.com>
Acked-by: Pavle Kotarac <Pavle.Kotarac@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Michael Strauss <michael.strauss@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Adding a function to read PSR capabilities
and ALPM capabilities.
Also adding a helper function to validate if
the sink and the driver support PSR SU.
[how]
- isolated all PSR and ALPM reading calls to a separate funciton
- set all required PSR caps
- added a helper function to check if PSR SU is supported by sink
and the driver
Reviewed-by: Roman Li <Roman.Li@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Pavle Kotarac <Pavle.Kotarac@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Current error log of dummy irq service doesn't have
src/ext ID info in the log.
[How]
Add src/ext ID in ack/set of dummy irq service.
Reviewed-by: Wayne Lin <Wayne.Lin@amd.com>
Acked-by: Pavle Kotarac <Pavle.Kotarac@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Solomon Chiu <solomon.chiu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
SMU now respects the PHY refclk disable request from driver.
This causes a hang during hotplug when PHY refclk was disabled
because it's not being re-enabled and the transmitter control
starts on dc_link_detect.
[How]
We normally would re-enable the clk with exit_optimized_pwr_state
but this is only set on DCN21 and DCN301. Set it for dcn31 as well.
This fixes DMCUB timeouts in the PHY.
Fixes: 64b1d0e8d5 ("drm/amd/display: Add DCN3.1 HWSEQ")
Reviewed-by: Eric Yang <Eric.Yang2@amd.com>
Acked-by: Pavle Kotarac <Pavle.Kotarac@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmG2fU0eHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGC7EH/3R7Rt+OD8Wn8Ss3
w8V+dBxVwa2u2oMTyUHPxaeOXZ7bi38XlUdLFPOK/76bGwO0a5TmYZqsWdRbGyT0
HfcYjHsQ0lbJXk/nh2oM47oJxJXVpThIHXJEk0FZ0Y5t+DYjIYlNHzqZymUyhLem
St74zgWcyT+MXuqY34vB827FJDUnOxhhhi85tObeunaSPAomy9aiYidSC1ARREnz
iz2VUntP/QnRnKVvL2nUZNzcz1xL5vfCRSKsRGRSv3qW1Y/1M71ylt6JVmSftWq+
VmMdFxFhdrb1OK/1ct/930Un/UP2NG9EJsWxote2XYlnVSZHzDqH7lUhbqgdCcLz
1m2tVNY=
=7wRd
-----END PGP SIGNATURE-----
Merge v5.16-rc5 into drm-next
Thomas Zimmermann requested a fixes backmerge, specifically also for
96c5f82ef0 ("drm/vc4: fix error code in vc4_create_object()")
Just a bunch of adjacent changes conflicts, even the big pile of them
in vc4.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This turns previously global functions into static, thus removing
compile-time warnings such as:
warning: no previous prototype for 'get_highest_allowed_voltage_level'
[-Wmissing-prototypes]
742 | unsigned int get_highest_allowed_voltage_level(uint32_t chip_family, uint32_t hw_internal_rev, uint32_t pci_revision_id)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
warning: no previous prototype for 'rv1_vbios_smu_send_msg_with_param'
[-Wmissing-prototypes]
102 | int rv1_vbios_smu_send_msg_with_param(struct clk_mgr_internal *clk_mgr, unsigned int msg_id, unsigned int param)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Changes since v1:
- As suggested by Rodrigo Siqueira:
1. Rewrite function signatures to make them more readable.
2. Get rid of unused functions in order to remove 'defined but not
used' warnings.
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Isabella Basso <isabbasso@riseup.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use the struct display_mode_lib pointer instead of passing lots of large
arrays as parameters by value.
Addresses this warning (resulting in failure to build a RHEL debug kernel
with Werror enabled):
../drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn31/display_mode_vba_31.c: In function ‘UseMinimumDCFCLK’:
../drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn31/display_mode_vba_31.c:7478:1: warning: the frame size of 2128 bytes is larger than 2048 bytes [-Wframe-larger-than=]
NOTE: AFAICT this function previously had no observable effect, since it
only modified parameters passed by value and doesn't return anything.
Now it may modify some values in struct display_mode_lib passed in by
reference.
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Michel Dänzer <mdaenzer@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Move code using the Pipe struct to a new helper function.
Works around[0] this warning (resulting in failure to build a RHEL debug
kernel with Werror enabled):
../drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn31/display_mode_vba_31.c: In function ‘dml31_ModeSupportAndSystemConfigurationFull’:
../drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn31/display_mode_vba_31.c:5740:1: warning: the frame size of 2144 bytes is larger than 2048 bytes [-Wframe-larger-than=]
The culprit seems to be the Pipe struct, so pull the relevant block out
into its own sub-function. (This is porting
commit a62427ef9b ("drm/amd/display: Reduce stack size for dml21_ModeSupportAndSystemConfigurationFull")
from dml31 to dml21)
[0] AFAICT this doesn't actually reduce the total amount of stack which
can be used, just moves some of it from
dml31_ModeSupportAndSystemConfigurationFull to the new helper function,
so the former happens to no longer exceed the limit for a single
function.
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Michel Dänzer <mdaenzer@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This fixes the warnings below, and also drops the display_count
variable, as it's unused.
In function 'svm_range_map_to_gpu':
warning: variable 'bo_va' set but not used [-Wunused-but-set-variable]
1172 | struct amdgpu_bo_va bo_va;
| ^~~~~
...
In function 'dcn201_update_clocks':
warning: variable 'enter_display_off' set but not used [-Wunused-but-set-variable]
132 | bool enter_display_off = false;
| ^~~~~~~~~~~~~~~~~
Changes since v1:
- As suggested by Rodrigo Siqueira:
1. Drop display_count variable.
- As suggested by Felix Kuehling:
1. Remove block surrounding amdgpu_xgmi_same_hive.
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Isabella Basso <isabbasso@riseup.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
`edp_stream` is only used when backend is enabled on eDP, don't
declare the variable outside that scope.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There are a few places that this isn't checked that could potentially
be a NULL pointer access.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why/how]
The function can be called on boot or after suspend when
links are not initialized, to prevent it guard it with
NULL pointer check
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Pavle Kotarac <Pavle.Kotarac@amd.com>
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Once EDID is parsed, the monitor HDMI support information is available
through drm_display_info.is_hdmi. The amdgpu driver still calls
drm_detect_hdmi_monitor() to retrieve the same information, which
is less efficient. Change to drm_display_info.is_hdmi
This is a TODO task in Documentation/gpu/todo.rst
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Claudio Suarez <cssk@net-c.es>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
During dcn31_stream_encoder_create, if PHYC/D get remapped to F/G on B0
then we'll index 5 or 6 into a array of length 5 - leading to an
access violation on some configs during device creation.
[How]
Software won't be touching PHYF/PHYG directly, so just extend the
array to cover all possible engine IDs.
Even if it does by try to access one of these registers by accident
the offset will be 0 and we'll get a warning during the access.
Fixes: 2fe9a0e117 ("drm/amd/display: Fix DCN3 B0 DP Alt Mapping")
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
To avoid hanging RDPCSPIPE when INTERCEPTB isn't set.
DMCUB owns control of that bit so DMCUB should manage returning the
information driver needs for link encoder control.
[How]
Add a new DMCUB command to return dp alt disable and dp4 information.
Reviewed-by: Hansen Dsouza <hansen.dsouza@amd.com>
Acked-by: Pavle Kotarac <Pavle.Kotarac@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
A debug option is needed to temporarily force dp2 new link training
fallback method for debugging purpose.
Reviewed-by: George Shen <George.Shen@amd.com>
Acked-by: Pavle Kotarac <Pavle.Kotarac@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Need to have dpia debug bits for configuring hpd delay.
[How]
Added hpd_delay_in_ms variable in dpia_debug_options.
Reviewed-by: Jimmy Kizito <Jimmy.Kizito@amd.com>
Acked-by: Pavle Kotarac <Pavle.Kotarac@amd.com>
Signed-off-by: meenakshikumar somasundaram <meenakshikumar.somasundaram@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
We shouldn't be accessing res_pool funcs from DM level,
therefore, we should create API and let the flow
be done in DC level.
[How]
We create new interface dp_get_link_enc to access and get the correct link_enc
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Pavle Kotarac <Pavle.Kotarac@amd.com>
Signed-off-by: Jude Shih <shenshih@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why/how]
The function can be called on boot or after suspend when
links are not initialized, to prevent it guard it with
NULL pointer check
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Pavle Kotarac <Pavle.Kotarac@amd.com>
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
-To ensure dc->res_pool has been initialized
[HOW]
-Check if dc->res_pool is true in
the if statement
Reviewed-by: Martin Leung <Martin.Leung@amd.com>
Acked-by: Pavle Kotarac <Pavle.Kotarac@amd.com>
Signed-off-by: Jarif Aftab <jaraftab@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
When HPD IRQ occurs, it triggers a PSR disable and reenable
directly through dc layer.
Since it does not pass through the power layer, the layer
that tracks whether PSR is enabled or disabled and which
masks are set, this layer is now out of sync with the real
PSR state in FW.
Theoretically PSR can be enabled during hw programming
sequences or any other situation where we must disable PSR.
[How]
Check if PSR is enabled before doing PSR disable/reenable.
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Pavle Kotarac <Pavle.Kotarac@amd.com>
Signed-off-by: Wyatt Wood <wyatt.wood@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Certain LTTPR require output VS/PE to be explicitly
set during PHY test automation.
[How]
Add vendor-specific sequence to set LTTPR
output VS/PE.
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Pavle Kotarac <Pavle.Kotarac@amd.com>
Signed-off-by: George Shen <George.Shen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Some of the vendor-specific workarounds added for transparent mode
also need to be applied to non-transparent mode in order to succeed
link training consistently.
[How]
Remove transparent mode check for the required workarounds.
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Pavle Kotarac <Pavle.Kotarac@amd.com>
Signed-off-by: George Shen <George.Shen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Certain USB4 docks do not seem to be able to handle disabling
DSC once it has been enabled on an MST stream. This can result
in blank displays.
[How]
As a work around, always enable DSC on docks exhibiting this issue. The
flag to indicate the use of DSC for MST streams on a USB4 dock is set
during detection of the dock and only cleared when the USB4 dock is
disconnected.
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Jimmy Kizito <Jimmy.Kizito@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
It seems like after a series of plug/unplugs we end up in a situation
where tiled display doesnt support Audio.
[HOW]
The issue seems to be related to when we check streams changed after an
HPD, we should be checking the audio_struct as well to see if any of its
values changed.
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Mustapha Ghaddar <mustapha.ghaddar@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
VS and PE requested by repeater should not persist for the sink.
[How]
Clear DPCD lane settings after repeater link training finishes.
Reviewed-by: Wesley Chalmers <wesley.chalmers@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: George Shen <George.Shen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Certain display configurations require an extra delay before
reading lane status with certain LTTPR.
[How]
Add temporary workaround to force AUX RD interval to
16ms for CR and EQ. Needs to be refactored later.
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: George Shen <George.Shen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Allow changing DET size with debug flag for testing purposes
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Michael Strauss <michael.strauss@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Vendor specific link rate toggle workaround should not be
applied outside of link training scenario, such as when
outputting PHY test pattern.
[How]
Add flag to indicate when link training is occuring.
Make workaround a no-op when flag is not set.
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: George Shen <George.Shen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Certain LTTPR require special workarounds in order to comply
with DP specifications.
[How]
Implement vendor specific sequences via DPCD writes to
vendor-specific LTTPR registers.
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: George Shen <George.Shen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Driver use primary eDP link stream as the condition
to enable fastboot or not.
In dual eDP case, set second screen only,
this would cause slave eDP timing to be used on primary one.
[HOW]
Add a check for unmatched eDP link stream.
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Brandon Syu <Brandon.Syu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Certain USB4 docks do not seem to be able to handle disabling
DSC once it has been enabled on an MST stream. This can result
in blank displays.
[How]
As a work around, always enable DSC on docks exhibiting this issue. The
flag to indicate the use of DSC for MST streams on a USB4 dock is set
during detection of the dock and only cleared when the USB4 dock is
disconnected.
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Jimmy Kizito <Jimmy.Kizito@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[HOW&WHY]
Add function to be used for early eDP power on
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Evgenii Krasnikov <Evgenii.Krasnikov@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
It seems like after a series of plug/unplugs we end up in a situation
where tiled display doesnt support Audio.
[HOW]
The issue seems to be related to when we check streams changed after an
HPD, we should be checking the audio_struct as well to see if any of its
values changed.
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Mustapha Ghaddar <mustapha.ghaddar@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
During otg sync trigger, plane states are used to decide whether the otg
is already synchronized or not. There are scenarions when otgs are
disabled without plane state getting disabled and in such case the otg is
excluded from synchronization.
[How]
Introduced pipe_idx_syncd in pipe_ctx that tracks each otgs master pipe.
When a otg is disabled/enabled, pipe_idx_syncd is reset to itself.
On sync trigger, pipe_idx_syncd is checked to decide whether a otg is
already synchronized and the otg is further included or excluded from
synchronization.
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Reviewed-by: Mustapha Ghaddar <mustapha.ghaddar@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: meenakshikumar somasundaram <meenakshikumar.somasundaram@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
VS and PE requested by repeater should not persist for the sink.
[How]
Clear DPCD lane settings after repeater link training finishes.
Reviewed-by: Wesley Chalmers <wesley.chalmers@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: George Shen <George.Shen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Change since v1: add brief description
1. Add hdmi frl pcon support to existing asic family.
2. Determine pcon frl capability based on pcon dpcd.
3. pcon frl is taken into consideration into mode validation.
v2: squash in warning fix (Alex)
Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Both of split and merge are pointers, not arrays.
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Lv Ruyi <lv.ruyi@zte.com.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Due to pass the wrong parameter down to the enable_stream_gating(),
it would cause the DSC of the removing stream would not be PG.
[HOW]
To pass the correct parameter down th the enable_stream_gating().
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Yi-Ling Chen <Yi-Ling.Chen2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This version brings along the following:
- FW promotion to 0.0.94
- Enable seamless boot for DCN301
- Improvements in bandwidth validation
- Fixes in flags update, link encoder assignments, DSC, ODM combine and more
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
When systme power up and eDP lit up by VBIOS,
in the core_link_enable_stream(),
the function will early return due to apply
apply_edp_fast_boot_optimization,
resulting the DP_PIXEL_COMBINE cannot get set
in enc3_dp_set_odm_combine.
[How]
Check ODM PIPE to avoid early return.
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Danny Wang <danny.wang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Due to pass the wrong parameter down to the enable_stream_gating(),
it would cause the DSC of the removing stream would not be PG.
[HOW]
To pass the correct parameter down th the enable_stream_gating().
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Yi-Ling Chen <Yi-Ling.Chen2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
display_object_info_table_v1_5 with atom_display_object_path_v3
will be used.
[How]
Add bios parser support for display_object_info_table_v1_5 with
atom_display_object_path_v3 for all existing, in use bios records
as well as for new records:
ATOM_CONNECTOR_CAP_RECORD_TYPE,
ATOM_CONNECTOR_SPEED_UPTO and
ATOM_BRACKET_LAYOUT_V2_RECORD_TYPE.
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Nevenko Stupar <Nevenko.Stupar@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Need to keep track of number of
references to stream pointer.
[how]
Call stream retain/release whenever
necessary in link_enc table assignment
sequence.
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Sung Joon Kim <sungkim@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Rename function name so it aligns with other resource
function names being used by dcn10.
[How]
Rename function name for consistency.
Reviewed-by: Ahmad Othman <Ahmad.Othman@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Zhan Liu <Zhan.Liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
OPTC_BYTES_PER_PIXEL calculation for 4:2:2 and 4:2:0 could have error.
[How]
Change to use following formula:
OPTC_DSC_BYTES_PER_PIXEL = ceiling((chunk size * 2^28) / slice width)
v2: squash in 64 bit divide fix (Alex)
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Bing Guo <Bing.Guo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
DCN301 is capable of running seamless boot
if keep_stolen_vga_memory is not set.
[How]
Add a helper to check whether an ASIC can support
seamless boot and set it based on base driver flags.
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Zhan Liu <Zhan.Liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Dynamic link encoder assignment expects that it can modify DC
current_state and the links associated with the incoming state when
performing full validation.
This does not align with our actual synchronization constraints
in DM's atomic_check.
[How]
Since link encoder assignment only happens as part of full validation
we can just use fast validation as part of atomic_check instead.
This satisfy's DC interface requirements and skips the DML calculations
needed for pipe programming - hopefully speeding up things a little bit
to offset the cost of double validation during stream modification.
We already do this as part of dc_commit_updates_for_stream()
with validate_bandwidth(), so extend this to dc_commit_state() as
well.
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Per hardware requirements, add a flag to control
z10 enable/disable.
Reviewed-by: Sung joon Kim <Sungjoon.Kim@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Clang static analysis reports this error
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc.c:2870:7: warning:
Dereference of null pointer [clang-analyzer-core.NullDereference]
if
(top_pipe_to_program->stream_res.tg->funcs->lock_doublebuffer_enable) {
^
top_pipe_to_program being NULL is caught as an error
But then it is used to report the error.
So add a check before using it.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In function dc_sink_destruct, kfree will check pointer, no need
to check again.
This change is to cleanup the code a bit.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Bernard Zhao <bernard@vivo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This change is to cleanup the code a bit.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Bernard Zhao <bernard@vivo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This was found by coccicheck:
./drivers/gpu/drm/amd/display/dc/core/dc_resource.c, 2516, 7-9, WARNING
possible condition with no effect (if == else)
hdmi_info.bits.YQ0_YQ1 is always YYC_QUANTIZATION_LIMITED_RANGE.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Ye Guojin <ye.guojin@zte.com.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Change causing issue. Need to revert the change.
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Sung Joon Kim <sungkim@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This version brings along following fixes:
- Fix issue that secondary display goes blank on Non DCN31.
- Adjust flushing data in DMCUB
- Revert patches which cause regression in hadnling MPO/Link encoder assignment
- Correct the setting within MSA of DP2.0
- Adjustment for DML isolation
- Fix FIFO erro in fast boot sequence
- Enable DSC over eDP
- Adjust the DSC power off sequence
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
After unloading driver, driver would not disable DSC function.
At next loading driver, driver would power all DSC engines off.
When driver powered the active DSC off, the screen would be gray
until reprograming DSC relatived register correcntly.
[HOW]
1. Remove DSC Power down code into init_pipes()
2. Depend on the OTG mapping information and DSC status to skip
power off for the working DSC.
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Yi-Ling Chen <Yi-Ling.Chen2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[What]
This change allows adjustment to the Visual Confirm
height border.
[Why]
Aids debugging and testing
[How]
Use the existing infrastructure to implement logic to
draw borders
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Harry VanZyllDeJong <hvanzyll@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
With eDP DSC enabled and set 4K 60Hz, there would be screen
corruption when booting to OS or enabling the driver.
[HOW]
Avoid powering down VDD when we cannot apply eDP fast boot.
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Brandon Syu <Brandon.Syu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
- Adding a DM interface to enable DSC over eDP on Linux
- DSC over eDP will allow to power savings by reducing
the bandwidth required to support panel's modes
- Apply link optimization algorithm to reduce link bandwidth
when DSC is enabled
[how]
- Read eDP panel's DSC capabilities
- Apply DSC policy on eDP panel based on its DSC capabilities
- Enable DSC encoder's on the pipe
- Enable DSC on panel's side by setting DSC_ENABLE DPCD register
- Adding link optimization algorithm to reduce link rate or lane
count based
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Previous LTTPR change has caused a regression that led to an
issue where LTTPR is disabled
[HOW]
Extended changes from previous fix to DCN30X
Reviewed-by: Wesley Chalmers <wesley.chalmers@amd.com>
Reviewed-by: Martin Leung <Martin.Leung@amd.com>
Reviewed-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Angus Wang <angus.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
In fast boot sequence, when change dispclk, otg is disabled but digfe
is enabled. This may cause dig fifo error.
[How]
Reset dig fifo after enable otg.
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: JinZe.Xu <JinZe.Xu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
DML itself is SW only, putting the logic as part of resource makes it
hw dependent and thus impossible to compile separately from dc.
Separate compilation is critical for unit testing as well as bbox tool
development
[how]
create new dml wrapper.
Copy logic from the validation functions into dml wrapper as base
implementation. Dml wrapper has internal/static implementations
for all helpers, and does not reference other functions.
It may reference dc structures/types for convenience.
This change now has all the changes for DML isolation squashed into
one.
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Jun Lei <jun.lei@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
There is a bug in MSA programming sequence that mistakenly set
MSA vsp/hsp to 1 for positive polarity. This is incorrect.
Reviewed-by: Ariel Bernstein <Eric.Bernstein@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
The previous changes for fixing MPO underflow with multiple
display connected caused a regression where the machine runs
into a hang when doing multiple driver pnp with multiple displays
connected
[HOW]
Reverted offending change
Reviewed-by: Martin Leung <Martin.Leung@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Angus Wang <angus.wang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Due to integration issues with branch merging,
a regression happened that prevented secondary
displays from lighting up or enabling certain features
[How]
Separated the new logic to be for DCN31 only and retained
pre DCN31 logic for all other ASICs
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Ahmad Othman <Ahmad.Othman@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Dmesg errors are found on dcn3.1 during reset test, but it's not
a really failure. So reduce it to a debug print.
Signed-off-by: Leo (Hanghong) Ma <hanghong.ma@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
In DC we want to wait for the INBOX0 HW Lock command to ACK before
continuing. This is to ensure that the lock has been successfully
acquired before programming HW in DC.
[How]
Add interfaces to send messages on INBOX0, poll for their completation
and clear the ack.
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Link encoder assignment tracking variables need to be (re)initialised
whenever dc_state is (re)initialised. Otherwise variables used for
dynamic encoder assignment (especially the link encoder availability
pool) are out of sync with dc_state and future encoder assignments are
invalid.
[How]
Initialise encoder assignment variables when creating new dc_state
resource.
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Jimmy Kizito <Jimmy.Kizito@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Stream ordering and count can vary from one state to the next. Only
checking a subset of entries in the encoder assignment table can lead to
invalid encoder assignments.
[How]
Check all entries in encoder assignment table when querying it.
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Jimmy Kizito <Jimmy.Kizito@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Some panels require to use TPS3 pattern to wake up link in PSR mode.
[How]
To add TPS3 selection information in PSR settings command and pass to
DMUB FW.
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Robin Chen <po-tchen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This version brings along following fixes:
- Improvements to INBOX0 HW Lock
- Add support for sending TPS3 pattern
- Fix Coverity Issues
- Fixes for DMUB
- Fix RGB MPO underflow with multiple displays
- WS fixes and code restructure
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Sung joon Kim <Sungjoon.Kim@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
For dpia link, link->hpd_status indicates current state, but driver
fails to capture hpd transitions in certain scenarios such as during
link training.
[How]
Added link->hpd_pending flag that captures arrival of new hpd.
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Coverity discovers holes in logic that needs to be addressed for
improved code integrity.
[How]
Address issues found by coverity without changing the actual logic.
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Chris Park <Chris.Park@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
At every reference to stream pointer, we need to increment/decrement the
kref_count. Not doing so will result in invalid stream pointer still
alive after hibernate cycle.
[how]
Call stream retain/release whenever the link encoder assignment is set
to true/false since it indicates if we want to reference the stream
pointer or not.
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Sung Joon Kim <sungkim@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The link encoder assignment leaves the old stream data when it was
unassigned. When the clear encoder assignment is called, it based on the
old stale data to access the de-allocated stream.
[How]
There should be no need to explicitly clean up the link encoder
assignment if the unassign loop does the work properly, the loop should
base on the current state to clean up the assignment.
Also, the unassignment should better clean up the values in the
assignement slots as well.
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Roy Chan <roy.chan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
According to eDP spec, DPCD 1.3 is only for eDP DPCD v1.4
In dpcd_set_link_settings function, the driver is just above v1.3
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: ChiawenHuang <chiawen.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
reduce az indirect register dump. need add az clock_gating control field
used in some project.
[how]
conditional output indrect register in the log. add clock_gating feild
Reviewed-by: Sung joon Kim <Sungjoon.Kim@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The link_enc_cfg API operates in one of two modes depending on the stage
of application of dc_state to hardware. The API is the safest way to
query link encoder assignments.
[How]
Use results of link encoder assignment query using link_enc_cfg API.
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Jimmy Kizito <Jimmy.Kizito@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
With RGB MPO enabled, playing a video with multiple displays connected
results in underflow when closing the video window
[HOW]
Reverted the old change to fix this problem, which prevented pipe splits
for multiple display configurations and caused high MCLK speeds during
idle. Added a two step call to dc_update_planes_and_stream, first time
with pipe split disabled and the second time with pipe split enabled,
which fixed the underflow issue
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Angus Wang <angus.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
matching the dmcub_support with all other dcn version.
Reviewed-by: Sung joon Kim <Sungjoon.Kim@amd.com>
Reviewed-by: Martin Leung <Martin.Leung@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
PSR set power command wasn't setting panel instance
and command version which caused both streams
to overwrite the same PSR state.
[how]
Pass panel instance to the set power command function
and to DMUB and set command version enum
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
1. The code to blank all dp display have been called many times,
so add helpers in dc_link to make it more concise.
2. Add some check to fix the dmesg errors at boot and resume from S3
on dcn3.1 during DQE's promotion test.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Reviewed-by: Wesley Chalmers <Wesley.Chalmers@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Leo (Hanghong) Ma <hanghong.ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Since the variables named is_end_of_payload and hpd_status are already
bool type, the ?: conditional operator is unnecessary any more.
Clean them up here.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Reviewed-by: Simon Ser <contact@emersion.fr>
Signed-off-by: Ye Guojin <ye.guojin@zte.com.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Trivial patch which adds a comment for macro
endif's in amdgpu_dm.c
Reviewed-by: Ariel Bernstein <Eric.Bernstein@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Anson Jacob <Anson.Jacob@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
In order to have dc_enable_dmub_notifications() more precise, add
one more condition to check if dc->debug.dpia_debug.bits.disable_dpia
is false.
Signed-off-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
The MPC memory clocks should be powered down when not in use.
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Jake Wang <haonan.wang2@amd.com>
Reviewed-by: Eric Yang <eric.yang2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
HPO is only used for DP2.0. HPO HW control should be
disable when not being used to save power.
[How]
Shutdown HPO HW control during init hw.
Shutdown HPO HW control during stream disable.
Enable HPO HW control during stream enable if DP2.0.
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Jake Wang <haonan.wang2@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why&how]
write LINK_SQUARE_PATTERN_num + 1 for square pulse pattern.
Specs requirement to write this register prior to write LINK_QUAL_LANEX_SET.
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Reviewed-by: George Shen <george.shen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
State can be cleared without removing individual streams (by
calling dc_remove_stream_from_ctx()). This can leave the
encoder assignment module in an incoherent state and cause
future assignments to be incorrect.
[How]
Clear encoder assignments when committing 0 streams or
re-initializing hardware.
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Jimmy Kizito <Jimmy.Kizito@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
In scenario when 1 display connected with pipe split (2 pipes in use)
and 3 new displays simultaneously hotplugged via MST hub (4 pipes in use),
mpcc may get reprogram to other vtg, remaining busy.
In this case waiting for mpcc idle timeouts with error like this:
[drm] REG_WAIT timeout 1us * 100000 tries - mpc2_assert_idle_mpcc
RIP: 0010:mpc2_assert_mpcc_idle_before_connect
Call Trace:
dcn20_update_mpcc
dcn20_program_front_end_for_ctx
dc_commit_state
amdgpu_dm_atomic_commit_tail
...
[How]
Add pipe split change condition to disable dangling plane.
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Roman Li <Roman.Li@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
MST monitor sends link loss short pulse continuous but sink is
occupy by HDMI input to lead link training fail.
[How]
disable link once retraining fail.
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Yu-ting Shen <yu-tshen@amd.com>
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
It was found that the system would hang on a dummy pstate when playing
4k60 videos on a 1080p 390Hz monitor.
[HOW]
Properly select the dummy_pstate_latency_ms when firmware assisted
memory clock switching is enabled instead of assuming that the highest
latency would work for every monitor timing.
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Felipe Clark <felclark@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix spacing issue for the format string.
Addresses-Coverity-ID: 1446765: ("Invalid printf format string")
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Anson Jacob <Anson.Jacob@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
- DPIA MST slot registers are not programmed during payload
allocation and hence MST does not work with DPIA.
- HPD RX interrupts are not handled for DPIA.
[How]
- Added inbox command to program the MST slots whenever
payload allocation happens for DPIA links.
- Added support for handling HPD RX interrupts
Signed-off-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
On certain configs, SMU clock table voltages don't match which cause parser
to behave incorrectly by leaving dcfclk and socclk table entries unpopulated.
[HOW]
Currently the function that finds the corresponding clock for a given voltage
only checks for exact voltage level matches. In the case that no match gets
found, parser now falls back to searching for the max clock which meets the
requested voltage (i.e. its corresponding voltage is below requested).
Signed-off-by: Michael Strauss <michael.strauss@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
As part of the FPU isolation work documented in
https://patchwork.freedesktop.org/series/93042/, isolate
code that uses FPU in DCN301 to DML, where all FPU code
should locate.
Cc: Christian König <christian.koenig@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Zhan Liu <Zhan.Liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Qingqing Zhuo <Qingqing.Zhuo@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
We have a regression that cause maximize lane settings to use
uninitialized data from unused lanes.
This will cause link training to fail for 1 or 2 lanes because the lane
adjust is populated incorrectly sometimes.
v2: fix build without CONFIG_DRM_AMD_DC_DCN (Alex)
Reviewed-by: Eric Yang <eric.yang2@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
option 1: disallow different lanes to have different lane settings
option 2: dpcd lane settings will always use the same hw lane settings
even if it doesn't match requested lane adjust
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
As DP features expands, we have encountered many situations where we
must configure a different DPCD lane setting from hw lane settings we
output. The change is to decouple hw lane settings from dpcd lane
settings to provide flexibility to configure dpcd and hw individually.
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Decouple lane settings decision logic all to its own function. The
function takes in lane adjust array and link training settings and
decide what hw lane setting and dpcd lane setting should be used.
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
