[Why]
Due to a small pre-fetch window, the active vline timing is a couple
of lines off when compared to what it should be.
[How]
Changed the calculation for the start vline to account for this window.
Signed-off-by: Murton Liu <murton.liu@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description] interlace mode shows wrong vertical timing.
Interface timing in Edid is half vertical timing as progressive timing.
driver doubled the vertical timing in edid_paser,
no need to double in optc again.
Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Reviewed-by: Chris Park <Chris.Park@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
ddc engines were recently changed to be independently tracked
from pipe count. the change was reflected in resource constructor
but not in destructor. this manifests as a memory leak when
pipe harvesting is enabled, since not all constructed ddc engines
are freed
[how]
make destructor symmetric with constructor for all dcX_resource
Signed-off-by: Jun Lei <Jun.Lei@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Tony Cheng <tony.cheng@amd.com>
Reviewed-by: Steven Chiu <Steven.Chiu@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
DF keeps awake after S0i3 resume due to DRAM_STATE_CNTL
is set by bios command table during dcn init_hw.
[How]
As a work around, check STATE_CNTL status before init_hw,
if it is 0 before init_hw and set to 1 after init_hw,
change it to 0.
Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
All ASICS we support has YCbCr support, so
the check is unnecessary, the currently logic
in validate output also returns true all
the time, so the unneccessary logic is removed
Signed-off-by: Eric Yang <Eric.Yang2@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Currently not supported, will black screen when set.
[How]
Fail validate timing helper for those modes.
Signed-off-by: Eric Yang <Eric.Yang2@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Also add dram clock to clocks struct, for systems that uses them.
Signed-off-by: Eryk Brol <eryk.brol@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Previously bandwidth validation was failing because swizzle mode was not
initialized during plane_state allocation. The swizzle mode was
calculated using pixed format which is how swizzle mode is initially
calculated in addrlib.
[How]
* Set default swizzle mode for validation to DC_SW_UNKNOWN
* Created new function in dcn10_assign_swizzle_mode which sets the
plane swizzle mode based on selected pixed format
* Added the call of assign_swizzle_mode into dc_validate_global_state
* Set failsafe swizzle mode back to DC_SW_LINEAR
Signed-off-by: Su Sung Chung <Su.Chung@amd.com>
Reviewed-by: Eric Yang <eric.yang2@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
HDMI_scramber is not enabled for pixel rate >340Mhz.
[How]
Calculate the phy clock to include the Hw frame packing factor.
Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Reviewed-by: Chris Park <Chris.Park@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Sometimes there are indications that the incorrect driver is being
loaded in automated tests. This change adds the ability for builds to
be tagged with a string, and picked up by the test infrastructure.
[how]
dc.c will allocate const for build id, which is init-ed with default
value, indicating production build. For test builds, build server will
find/replace this value. The test machine will then verify this value.
Signed-off-by: Jun Lei <Jun.Lei@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-----BEGIN PGP SIGNATURE-----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=dMl4
-----END PGP SIGNATURE-----
BackMerge v4.19-rc6 into drm-next
I have some pulls based on rc6, and I prefer to have an explicit backmerge.
Signed-off-by: Dave Airlie <airlied@redhat.com>
[Why]
EDID emulation didn't work properly for linux, as we stop programming
if nothing is connected physically.
[How]
We get a flag from DRM when we want to do edid emulation. We check if
this flag is true and nothing is connected physically, if so we only
program the front end using VIRTUAL_SIGNAL.
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
There have been a few reports of Vega10 display remaining blank
after S3 resume. The regression is caused by workaround for mode
change on Vega10 - skip set_bandwidth if stream count is 0.
As a result we skipped dispclk reset on suspend, thus on resume
we may skip the clock update assuming it hasn't been changed.
On some systems it causes display blank or 'out of range'.
[How]
Revert "drm/amd/display: Fix Vega10 black screen after mode change"
Verified that it hadn't cause mode change regression.
Signed-off-by: Roman Li <Roman.Li@amd.com>
Reviewed-by: Sun peng Li <Sunpeng.Li@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The DISPCLK value was previously requested to be 15% higher for all
ASICs that went through the dce110 bandwidth code path. As part of a
refactoring of dce_clocks and the dce110 set bandwidth codepath this
was removed for power saving considerations.
That change caused display corruption under certain hardware
configurations with Vega10.
[How]
The 15% DISPCLK increase is brought back but only on dce110 for now.
This is should be a temporary workaround until the root cause is sorted
out for why this occurs on Vega (or other ASICs, if reported).
Tested-by: Nick Sarnie <sarnex@gentoo.org>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Previously night light forced a full update by
applying a transfer function update regardless of if it was changed.
This logic was removed,
Now gamma surface updates are only applied when there is also a plane
info update, this does not work in cases such as using the night light
slider.
[HOW]
When moving the night light slider we will perform a full update if
the gamma has changed and there is a surface, even when the surface
has not changed. Also get stream updates in setgamma prior to
update planes and stream.
Signed-off-by: SivapiriyanKumarasamy <sivapiriyan.kumarasamy@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
There are two different variables used to calculate v_update and v_ready,
one for validation and the other for performance parameter calculation.
Before the variable for validation was used which caused underflow on
1080edp with vsr enabled
[HOW]
program v_update and v_ready with the variables for performance parameter
calculation
Signed-off-by: Su Sung Chung <su.chung@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use link->link_index as index to pipe_ctx[] to get proper link
information instead of using index 0 to avoid potential miss matches.
Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
FPGA doesn't program backend, so we don't need certain link settings
(audio stream for example).
Signed-off-by: Nikola Cornij <nikola.cornij@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
current dc_link_detect function is not only detection but also update some link data.
[How]
added a pure get HPD state function.
Signed-off-by: Chiawen Huang <chiawen.huang@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Tony Cheng <tony.cheng@amd.com>
Reviewed-by: Steven Chiu <Steven.Chiu@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
support i2c transition event log
[How]
refined aux REQ and REP events in aux flow.
commented REQ and REP events in i2c flow.
note: i2c event log is currently commented out. more work is required
to find an portocol parser to and generate event for the parser
Signed-off-by: Chiawen Huang <chiawen.huang@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Clock sources currently have support for asic specific
function pointers. But actual separation into functions
was never performed, leaving us with giant functions that
rely on switch.
This change creates separate functions, removing switch use.
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We were not providing the correct pixel clocks to DML for marks
calculation.
Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add Raven2 definitions in the dc code
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Existing debug dump are all invariant, new “low 32-bit of address”
dump is not invariant
Signed-off-by: Jun Lei <Jun.Lei@amd.com>
Reviewed-by: Eric Yang <eric.yang2@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
There are same purpose transition events.
[How]
remove the redundant event log.
Signed-off-by: Chiawen Huang <chiawen.huang@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Virtual sink is used when set mode happens on a disconnected display
to allow the mode set to proceed. This did not work with MST because
the logic for acquiring stream encoder uses stream signal to determine
the special handling is required, and stream signal is virtual instead
of DP in this case.
[How]
Use link type to decide instead.
Signed-off-by: Eric Yang <Eric.Yang2@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The i2c and aux engines are similar, and should be placed
next to eachother for readability
[How]
Reorder the elements of the resource_pool struct
Signed-off-by: David Francis <David.Francis@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
AMD Stoney reference board, there are only 2 pipes (not include
underlay), and 3 connectors. resource creation, only
2 I2C/AUX engines are created. Within dc_link_aux_transfer, when
pin_data_en =2, refer to enengines[ddc_pin->pin_data->en] = NULL.
NULL point is referred later causing system crash.
[how]
each asic design has fixed number of ddc engines at hw side.
for each ddc engine, create its i2x/aux engine at sw side.
Signed-off-by: Hersen Wu <hersenxs.wu@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Some display need disconnect delay. Adding this parameter for future use
Signed-off-by: Derek Lai <Derek.Lai@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Although 4 unique register values exist for gamma modes, two are
actually the same (the two RAMs) It’s not possible for caller to
understand this HW specific behavior, so some parsing is necessary
in driver
Signed-off-by: Jun Lei <Jun.Lei@amd.com>
Reviewed-by: Wesley Chalmers <Wesley.Chalmers@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]Update Code to get DTN golden log check to pass for tests run after
DAL217 tests.
[How]Change how dcn10_log_hw_state function prints HW state info
(CM_GAMUT_REMAP_Cx_Cx registers) when GAMUT REMAP is in bypass mode.
Signed-off-by: Gary Kattan <gary.kattan@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The dce_i2c_hw code contained four funtcions that were only
called in one place and did not have a clearly delineated
purpose.
[How]
Inline these functions, keeping the same functionality.
This is not a functional change.
The functions disable_i2c_hw_engine and release_engine_dce_hw were
pulled into their respective callers.
The most interesting part of this change is the acquire functions.
dce_i2c_hw_engine_acquire_engine was pulled into
dce_i2c_engine_acquire_hw, and dce_i2c_engine_acquire_hw was pulled
into acquire_i2c_hw_engine.
Some notes to show that this change is not functional:
-Failure conditions in any function resulted in a cascade of calls that
ended in a 'return NULL'.
Those are replaced with a direct 'return NULL'.
-The variable result is the one from dce_i2c_hw_engine_acquire_engine.
The boolean result used as part of return logic was removed.
-As the second half of dce_i2c_hw_engine_acquire_engine is only executed
if that function is returning true and therefore exiting the do-while
loop in dce_i2c_engine_acquire_hw, those lines were moved outside
of the loop.
Signed-off-by: David Francis <David.Francis@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
On PCO and up, whenever SMU receive message to indicate active
display count = 0. SMU will turn off 48MHZ TMDP reference clock
by writing to 1 TMDP_48M_Refclk_Driver_PWDN. Once this clock is
off, no PHY register will respond to register access. This means
our current sequence of notifying display count along with requesting
clock will cause driver to hang when accessing PHY registers after
displays count goes to 0.
[How]
Separate the PPSMC_MSG_SetDisplayCount message from the SMU messages
that request clocks, have display own sequencing of this message so
that we can send it at the appropriate time.
Do not redundantly power off HW when entering S3, S4, since display
should already be called to disable all streams. And ASIC soon be
powered down.
Signed-off-by: Eric Yang <Eric.Yang2@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The i2c code contains two structs that contain the same
information as i2c_payload
[How]
Replace references to those structs with references to
i2c_payload
dce_i2c_transaction_request->status was written to but never read,
so all references to it are removed
Signed-off-by: David Francis <David.Francis@amd.com>
Reviewed-by: Jordan Lazare <Jordan.Lazare@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Logging hardware state can be done by triggering a write to the
debugfs file. It would also be useful to be able to read the hardware
state from the debugfs file to be able to generate a clean log without
timestamps.
[How]
Usage: cat /sys/kernel/debug/dri/0/amdgpu_dm_dtn_log
Threading is an obvious concern when dealing with multiple debugfs
operations and blocking on global state in dm or dc seems unfavorable.
Adding an extra parameter for the debugfs log context state is the
implementation done here. Existing code that made use of DTN_INFO
and its associated macros needed to be refactored to support this.
We don't know the size of the log in advance so it reallocates the
log string dynamically. Once the log has been generated it's copied
into the user supplied buffer for the debugfs. This allows for seeking
support but it's worth nothing that unlike triggering output via
dmesg the hardware state might change in-between reads if your buffer
size is too small.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Jordan Lazare <Jordan.Lazare@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
There is currently an intermittent hang from a memory leak in
DTN stress testing. It is caused by unfreed memory during driver
disable.
[How]
Do a dc_sink_release in the case that skips it incorrectly.
Signed-off-by: SivapiriyanKumarasamy <sivapiriyan.kumarasamy@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Now that we "scale" time delays correctly on Maximus (as of diags svn
r170115), the forced "35 ms" wait time now becomes 35 ms * 500 = 17.5
seconds, which is far too long. Even having to repeat polling a
register once causes excessive delays on Maximus.
[How]
Just use the regular wait time passed to the generic_reg_wait()
function. This is sufficient for Maximus now, and it also means that
there's one less "Maximus-only" code path in DAL.
Also disable the "REG_WAIT taking a while:" message on Maximus, since
things do take a while longer there and 1-2ms delays are not uncommon
(and nothing to worry about).
Signed-off-by: Ken Chalmers <ken.chalmers@amd.com>
Reviewed-by: Eric Bernstein <Eric.Bernstein@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Tony Cheng <tony.cheng@amd.com>
Reviewed-by: Steven Chiu <Steven.Chiu@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The function pointers of the dce_i2c_hw struct were never
accessed from outside dce_i2c_hw.c and had only one version.
As function pointers take up space and make debugging difficult,
and they are not needed in this case, they should be removed.
[How]
Remove the dce_i2c_hw_funcs struct and make static all
functions that were previously a part of it. Reorder
the functions in dce_i2c_hw.c.
Signed-off-by: David Francis <David.Francis@amd.com>
Reviewed-by: Sun peng Li <Sunpeng.Li@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
There is currently an intermittent hang from a memory leak in
DTN stress testing. It is caused by unfreed memory during driver
disable.
[How]
Do a dc_sink_release in the case that skips it incorrectly.
Signed-off-by: SivapiriyanKumarasamy <sivapiriyan.kumarasamy@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This adds support for LVDS displays.
v2: add support for spread spectrum, sink detect
v3: clean up enable_lvds_output
v4: fix up link_detect
v5: remove assert on 888 format
Bug: https://bugs.freedesktop.org/show_bug.cgi?id=105880
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The if statement isn't indented and it makes static checkers complain.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix comile warning like,
CC [M] drivers/gpu/drm/i915/gvt/execlist.o
CC [M] drivers/gpu/drm/nouveau/nvkm/subdev/instmem/nv50.o
CC [M] drivers/gpu/drm/radeon/btc_dpm.o
CC [M] drivers/isdn/hisax/avm_a1p.o
CC [M] drivers/gpu/drm/amd/amdgpu/../display/dc/dcn10/dcn10_dpp.o
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn10/dcn10_hw_sequencer.c: In function ‘dcn10_update_mpcc’:
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn10/dcn10_hw_sequencer.c:1903:9: warning: missing braces around initializer [-Wmissing-braces]
struct mpcc_blnd_cfg blnd_cfg = {0};
^
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn10/dcn10_hw_sequencer.c:1903:9: warning: (near initialization for ‘blnd_cfg.black_color’) [-Wmissing-braces]
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Wen Yang <wen.yang99@zte.com.cn>
Reviewed-by: Jiang Biao <jiang.biao2@zte.com.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Existing DTN infrastructure in driver is hacky. It uses implicit log
names, and also incorrect escape ID.
[how]
- Implement using generic DTN escape ID.
- Move file logging functionality from driver to to script; driver now outputs to string/buffer
- Move HWSS debug functionality to separate c file
- Add debug functionalty for per-block logging as CSV
- Add pretty print in python
Signed-off-by: Jun Lei <Jun.Lei@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
During S4/S3 stress test it is possible to resume from S4 without
calling mode set on eDP, meaning high level optimization flag is not
reset. If this is followed by an S3 resume call, driver will see
optimization flag is set and consume it and think backend is powered
on when in fact it is not.
This results in PHY being off in sequence where
S4->Resume->S3->Resume->ApplyOpt->black screen.
[How]
Move optimization flag to stream instead of a DC flag.
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
There are two versions of the hw function pointers: one for dce80
and one for all other versions. These paired functions are
nearly identical. dce80 and dce100 should not require
different i2c access functions.
[How]
Combine each pair of functions into a single function. Mostly
the new functions are based on the dce100 versions as those
versions are newer, support more features, and
were more maintained.
Signed-off-by: David Francis <David.Francis@amd.com>
Reviewed-by: Sun peng Li <Sunpeng.Li@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Define register for dcn10 for future changes
Signed-off-by: Nikola Cornij <nikola.cornij@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add csc_transform struct to dc_stream_update, and program if set when
updating streams
Signed-off-by: SivapiriyanKumarasamy <sivapiriyan.kumarasamy@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
I2C code did not match dc resource model and was generally
unpleasant
[How]
Move code into new svelte dce_i2c files, replacing various i2c
objects with two structs: dce_i2c_sw and dce_i2c_hw. Fully split
sw and hw code paths. Remove all redundant declarations. Use
address lists to distinguish between versions. Change dce80 code
to newer register access macros.
Signed-off-by: David Francis <David.Francis@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add gamut remap to dc_stream_update struct, and program if set when updating
streams.
Signed-off-by: SivapiriyanKumarasamy <sivapiriyan.kumarasamy@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Recently we fixed HDR static meta using AFMT registers to be treated as
fast stream update.
Dynamic meta is still being treated as (full) surface update because it
touches HUBP and it travels with pipe data.
Here we change it to be (fast) stream update.
Note, originally we also wanted to redesign here a bit, but without OS
level support for true dynamic meta, it's left the same. We are simply
using HW that can do dynamic meta to send HDR static meta, I still prefer
keeping it in one static meta type then defining dynamic meta types to
hold the same info. Once we know how OS interfaces look like, we can
do proper design.
[How]
Move dyn meta update from update_hubp_dpp to commit_planes_do_stream_update
Signed-off-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Vesa DPMS tool sends different HDR meta in OS flips without changing output
parameters. We don't properly update HDR info frame:
- we label HDR meta update as fast update
- when updating HW info frame, we only do it if full update
[How]
It should still be fast update, so when doing HW infoframe update,
do it always no matter the update type.
Also, don't request passive flip for HDR meta update only without output
transfer function or color space changed.
Signed-off-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alvin lee <alvin.lee3@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
- program infoframe for Stereo
- program stereo flip control registers properly
v2: Add missing license headers
Signed-off-by: Alvin lee <alvin.lee3@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: SivapiriyanKumarasamy <sivapiriyan.kumarasamy@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This was missed when pushing public patch for 3e3a40b03847 (drm/amd/display:
Updated HDR Static Metadata to directly take info packet raw)
This is currently no problem yet since we're not doing HDR on Linux yet.
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove dependency on internal sink map and instead
use existing stream and plane state
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Tony Cheng <tony.cheng@amd.com>
Reviewed-by: Steven Chiu <Steven.Chiu@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Unsigned int is guaranteed to be >= 0, and read_channel_reply checks for
overflows. read_channel_reply also returns -1 on error, which is what
dc_link_aux_transfer is expected to return on error.
[How]
Remove the if-statement. Return result of read_channel_reply directly.
Signed-off-by: Leo (Sunpeng) Li <sunpeng.li@amd.com>
Reviewed-by: Mikita Lipski <Mikita.Lipski@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
mono formats are treated exactly the same as equivallent bpp
444 formats. Dml validation however lacks 444 8 bit format
while dml perf param calculation lacks mono format support
This change makes them equivallent as far as the enum is concerned
to avoid having to update dml
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This allows us to avoid any vbios bugs when initializing clocks
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
There are outstanding bugs for PIP in Dal3:
-Crash when toggling PIP visibility
-Global Alpha is not working, Adjusting global alpha
doesn’t have an effect
-Cursor is not working with pip plane and pipe splits
-One flash occurs when cursor enters PIP plane from
top/bottom
-Crash when moving PIP plane off the screen
[How]
Resolve divide by 0 error
Implement global alpha
Program cursor on all pipes
Add dst rects' x and y offests into cursor position
Disable cursor when it is beyond bottom/top edge
Signed-off-by: Gloria Li <geling.li@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Tony Cheng <tony.cheng@amd.com>
Reviewed-by: Steven Chiu <Steven.Chiu@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
There is currently a dependency on the order in which tests are executed.
This is because the non-relevant state info is being printed, which results
in the output based on the state from the previous test.
[how]
Print DPP DTN log only if the pipe is enabled.
In addition to the affected per-submission DTN golden logs, included in this
change is also DTN golden log update for pre-submission tests.
The other DTN golden logs affected by this change will be updated upon
nightly test run (which will generate the updated DTN logs).
Signed-off-by: Nikola Cornij <nikola.cornij@amd.com>
Reviewed-by: Nikola Cornij <Nikola.Cornij@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
We didn't transfer the camera/video viewport coordinate
when doing rotation and mirror.
[how]
To correct the viewport coordinate in calculate_viewport().
Signed-off-by: Martin Tsai <Martin.Tsai@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
If the hardware supports DFS bypass it will always be enabled after
creation of the DCCG. DFS bypass should only be enabled when
the current stream consists of a single embedded panel and the
minimum display clock is below the DFS bypass threshold.
[How]
Add a function to the DCCG table that updates the DFS bypass state
when setting the bandwidth. If the DFS bypass state is changed, the
clock needs to be reprogrammed to reflect this before the DPREFCLK
is updated for audio endpoints. The existing display clock value
is used as the target display clock value when reprogramming since the
resulting change will be equal or larger to the current value.
These changes only specifically target dce110 but do offer a framework
for support on other applicable targets.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: David Francis <David.Francis@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
We explicitly disable DFS bypass support when creating DC. Support
for this feature should now be in place so it can be left implicitly
enabled.
[How]
Remove the line that disables DFS bypass support.
Note: This option was actually reset to false anyway for most of
the hardware I've tested on making this particular line misleading
in the first place. This patch also fixes this issue.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
While there is support for using and quering DFS bypass clocks the
hardware is never notified to enter DFS bypass mode for dce110.
[How]
Add a flag that can be set when programming the display engine PLL
to enable DFS bypass mode. If this flag is set then the hardware is
notified to enter DFS bypass mode and the correct display engine clock
frequency can be acquired.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Legacy IRI style is not linux friendly.
[how]
New function pointer call
semantics will be used for all future PPLIB/DAL interfaces, and also
some existing will be refactored. This change defines how the
new function pointer structures will look, as well as implements
Signed-off-by: Jun Lei <Jun.Lei@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 8624c3c4dbfe24fc6740687236a2e196f5f4bfb0.
We need CONFIG_DRM_AMD_DC_DCN1_0 to guard code that is using fp math.
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Leo (Sunpeng) Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Dentist did ranges were incomplete as max setting has an unusual
divider step up of 66.
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
dp_ss_off flag doesn't need to be set, so we create a link_init
function if it is needed by an asic
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Eric Bernstein <Eric.Bernstein@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
dp_ss_control = 0 means ss is off, we had a typo where
we would double not dp_ss_control while setting dp_ss_off
flag
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Eric Bernstein <Eric.Bernstein@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Do not retrain link settings if lane count and link rate are both
unknown. Causes driver to be stuck reading VBIOS register after
removing emulated connection.
Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Older ASICs require both phys_id and connector_id
to execute bios command table. If we are not passing the
right connector_id - it can lead to a black screen.
[how]
Set connector_obj_id when executing vbios command table
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Reviewed-by: Hersen Wu <hersenxs.wu@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
[why]
We are disabling clock source while other pipes are still using
it, because we don't verify the number of pipes that share it.
[how]
- Adding a function in resources to return the number of pipes
sharing the clock source.
- Checking that no one is sharing the clock source before disabling
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
[why]
HDMI and DVI share the same PHY clock and single link
DVI and HDMI both use 4 lanes, so they should be allowed
to be sharing the same clock source if all other parameters
are satisfied.
[how]
Change a check for general DVI to Dual DVI.
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
DOUBLE_BUFFER_EN bit is getting cleared before enable blanking.
That leads to CRTC_BLANK_DATA_EN is getting updated immediately.
[How]
Get DOUBLE_BUFFER_EN bit set, the same as DCE110.
Signed-off-by: Jerry (Fangzhi) Zuo <Jerry.Zuo@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
for vega, dp set_panel_mode is
handled by psp firmware. dal should not program the
register again.
[how]
dal does not program panel mode.
Signed-off-by: Hersen Wu <hersenxs.wu@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
When programming tonga's connector's backend we didn't take
in account that HDMI's colour depth might be more than 8bpc
therefore we need to add a switch statement that would adjust
the pixel clock accordingly.
[how]
Add a switch statement updating clock by its appropriate
coefficient.
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
[Why]
We seem to have an issue where high enough display clock
will not get set properly during S3 resume if we only
call vbios once
[How]
Expand condition of display clock programming to happen
even when cached display clock matches requested display
clock
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The pointer for integrated_info can be NULL which causes the system to
do a null pointer deference and hang on boot.
[How]
Add a check to ensure that integrated_info is not null before enabling
DP ss.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Sun peng Li <Sunpeng.Li@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Prevent clock source sharing between HDMI and DP connectors.
DP shouldn't be sharing its ref clock with phy clock,
which caused an issue of older ASICS booting up with multiple
diplays plugged in.
[how]
Add an extra check that would prevent HDMI and DP sharing clk.
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Reviewed-by: Hersen Wu <hersenxs.wu@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
[why] dp hbr2 eye diagram pattern for raven asic is not stabled.
workaround is to use tp4 pattern. But this should not be
applied to asic before raven.
[how] add new bool varilable in asic caps. for raven asic,
use the workaround. for carrizo, vega, do not use workaround.
Signed-off-by: Hersen Wu <hersenxs.wu@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The calculated values for actual disp_clk_khz were ignored when
notifying pplib of the new display requirements. In order to honor DFS
bypass clocks from the hardware, the calculated value should be used.
[How]
The return value for set_dispclk is now assigned back into new_clocks
and correctly carried through into dccg->clks.phyclk_khz. When notifying
pplib of new display requirements dccg->clks.phyclk_khz is used
instead of dce.dispclk_khz. The value of dce.dispclk_khz was never
explicitly set to anything before.
A 15% higher display clock value than calculated is no longer requested
for dce110 since it now makes use of the calculated value.
Since dce112 makes use of dce110's set_bandwidth but not its
update_clocks it needs to have the value correctly carried through.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Custom degamma lut functions are a feature we would
like to support on compatible hardware
[How]
In atomic check, convert from array of drm_color_lut to
dc_transfer_func. On hardware commit, allow for possibility
of custom degamma. Both are based on the equivalent
regamma pipeline.
Signed-off-by: David Francis <David.Francis@amd.com>
Reviewed-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
In the dce112 function to destroy the resource pool, engines
(the aux engines) is destroyed twice. This has no ill effects
but is a tad redundant.
[How]
Remove the redundant call
Signed-off-by: David Francis <David.Francis@amd.com>
Reviewed-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
This hook that is supposed to read the actual backlight value
is used in a few places throughout the kernel to setup or force
update on backlight
[How]
Create a dc function that calls the existing abm function, and
call that function from amdgpu
Signed-off-by: David Francis <David.Francis@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
400.1.1 is failing because we are not performing link training when
we get an HPD pulse for the same display. This is breaking DP
compliance
[How]
Always perform link training after HPD pulse if the detection
reason is not DETECT_REASON_HPDRX.
Signed-off-by: abdoulaye berthe <abdoulaye.berthe@amd.com>
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
VGA sometimes has trouble retrieving the EDID on very long cables, KVM
switches, or old displays.
[How]
Only require EDID read for HDMI and DVI and exempt other types (DP,
VGA). We currently don't support VGA but if anyone adds support in the
future this might get overlooked.
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Suggested-by: Michel Dänzer <michel@daenzer.net>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Some boards seem to have a problem where HPD is high on HDMI even though
no display is connected. We don't want to report these as connected. DP
spec still requires us to report DP displays as connected when HPD is
high but we can't read the EDID in order to go to fail-safe mode.
[How]
If connector_signal is not DP abort detection if we can't retrieve the
EDID.
v2: Add Bugzilla and stable
Bugzilla: https://bugs.freedesktop.org/107390
Bugzilla: https://bugs.freedesktop.org/106846
Cc: stable@vger.kernel.org
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add a missing void parameter to function dc_create_transfer_func, fixes
sparse warning:
warning: non-ANSI function declaration of function 'dc_create_transfer_func'
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
PSR_SET command is sent to the microcontroller in order to initialize
parameters needed for PSR feature, such as telling the microcontroller
which pipe is driving the PSR supported panel. When this command is
skipped or fails, the microcontroller may program the wrong thing if
driver tries to enable PSR.
[How]
If PSR_SET fails, do not set psr_enable flag to indicate the feature is
not yet initialized.
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The sequence is slightly changed when bring .set_bandwidth out
from the end of programming backend to the end of programming
surface. Vega10 doesn't like to get clocks updated if
stream_count is zero in the current context (Atomic Reset).
[How]
Do not update clocks if no stream is showing up in the context.
Fixes 1b2b130192 "dc: Remove 300Mhz minimum disp clk limit."
Signed-off-by: Jerry (Fangzhi) Zuo <Jerry.Zuo@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
engine and aux_engine are unnecessary layers we want to remove this
layer.
[How]
flatten engine and aux engine structs into one struct called
aux_engine and remove all references to the engine struct.
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Some receivers seem to fail the first link training but are good on
subsequent tries. We want to retry link training again. This fixes
HTC vive pro not lighting up after being disabled.
[How]
Check if the link training passed without fall back if this is not
the case then we retry link training.
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
confusing as to which part of debug is informational, and which part causes behavioral change
Signed-off-by: Jun Lei <Jun.Lei@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Aux engine is created from i2caux layer. We want to remove this layer
and use the engine directly.
[How]
Decouple aux engine from i2caux. Move aux engine related code to dce folder and use
dc resource pool to manage the engine. And use the engine functions directly
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Diags has POR to run the video workload using AYCRCB8888 through DCN;
capture it through DWB and send it to VCN hardware to encode
[how]
added the code to support this format so that DPP ICSC will be able to
convert it from YUV444 to internal RGB and DWB OCSC will be able to
convert from internal RGB to YUV420
Signed-off-by: vikrant mhaske <vikrant.mhaske@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
When a dce100 asic was suspended, the clocks were not set to 0.
Upon resume, the new clock was compared to the existing clock,
they were found to be the same, and so the clock was not set.
This resulted in a pernicious blackscreen.
[How]
In atomic commit, check to see if there are any active pipes.
If no, set clocks to 0
Signed-off-by: David Francis <David.Francis@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
diag specify what the full config and is only concerned about pass/fail at the end
having inter-op code like verifiying we can actually train at reported link rate
slows down diag test and add complexity we don't need
[how]
add dc_debug option to skip capability link trianing
also remove hbr in function name as verify is not specific to hbr
Signed-off-by: Tony Cheng <tony.cheng@amd.com>
Reviewed-by: Ken Chalmers <ken.chalmers@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
The warning message floods the dmesg log on Tonga even
though it is expected to have a pix_clk set to zero,
when the pipe is not active.
[how]
remove the assert
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Allowing CONFIG_DRM_AMD_DC_DCN1_0 to be disabled on X86 was an
opportunity for display with Raven Ridge accidentally not working.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Any Linux kernel code should pass checkpatch.pl with no errors and
little, if any, warning.
[How]
Fixing some spacing errors and warnings.
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why&How]
Cursor boosting can only be done on DCN+
Check for nullptr since DCE doesn't implement it.
Signed-off-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com>
Reviewed-by: Sivapiriyan Kumarasamy <Sivapiriyan.Kumarasamy@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Steven Chiu <Steven.Chiu@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Some DTN tests still failing @ 2% Need to reduce.
[how]
add instrumentation code to driver so we can get more information from failed runs.
Signed-off-by: Jun Lei <Jun.Lei@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
We sometime require remapping of FB address space to UMA
[How]
Move address tracking up a layer before we apply address translation
Signed-off-by: Tony Cheng <tony.cheng@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This allows DM to do any necessary updates before MST discovery starts.
Signed-off-by: Nikola Cornij <nikola.cornij@amd.com>
Reviewed-by: Nikola Cornij <Nikola.Cornij@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Testing team wants a way to tell if HDR is on or not
[How]
Program the overscan color to visually indicate the HDR state of the top-most plane
Signed-off-by: Gloria Li <geling.li@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Cursor boosting is done via CNVC_CUR register which is DPP, not HUBP
Previous commit was implementing it in HUBP functions,
and also breaking diags tests.
[How]
1. Undo original commit as well as Eric's diags test fix, almost completely
2. Move programming to DPP and call via new dc_stream function
3. Also removing cur_rom_en from dpp_cursor_attributes and programming
as part of normal cursor attributes as it depends on cursor color format
Signed-off-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Currently we do not turn off autocal when scaling is in bypass.
In case vbios enalbes auto scale and our first mode set is a non-scaled
mode we have autocal on causing screen corruption.
[how]
moves turning autocal off to be first thing done during scaler setup
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why] Prevent unexpected color shows if DalMpVisualConfirm enable.
[How] Zero out color configuration data for DalMpVisualConfirm when initiating.
Signed-off-by: Hugo Hu <hugo.hu@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Tony Cheng <tony.cheng@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
DV updated their dml with an option to use max vstartup,
this updates dc dml with the same option
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The previous code could allow through attempts to enable more streams
than there are timing generators, in designs where the number of pipes
is greater than the number of timing generators.
[How]
Compare the new stream count to the resource pool's timing generator
count, instead of its pipe count. Also correct a typo in the error
message.
Signed-off-by: Ken Chalmers <ken.chalmers@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: David Francis <David.Francis@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Regamma/CTM tests require CRC support
[How]
The CRC registers that were used in DCE exist under different
names in DCN. The code was copied from DCE (in
dc/dce110/dce110_timing_generator.c) into DCN, and changed to
use the DCN register access helper functions.
Signed-off-by: David Francis <David.Francis@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
PNP cause bsod regression fix
[HOW]
Add NULL check
Signed-off-by: Yue Hin Lau <Yuehin.Lau@amd.com>
Reviewed-by: Hugo Hu <Hugo.Hu@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
"DalEnableHDMI20" set to 0, disallow HDMI YCbCr420 and pixel clock > 340Mhz
Default is enabled.
Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
get_channel_status() can return 0 in returned_bytes, and report a
successful operation result. This is because it prunes the first status
byte out. This was preventing read_channel_reply() from being called
(due to the faulty condition), and consequently preventing the AUX
reply status from being set.
[How]
Fix the conditional so that it accounts for when get_channel_status()
returns 0 bytes read.
[Fixes]
Fixes possible edid read failures during S3 resume, where we are now
relying on DRM's DP AUX handling. This was an regression introduced by:
Author: Harry Wentland <harry.wentland@amd.com>
drm/amd/display: Return aux replies directly to DRM
Signed-off-by: Leo (Sunpeng) Li <sunpeng.li@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
There is no point in keeping the AUX reply value in the raw format as
returned from reading the AUX_SW_DATA register.
[How]
Shift it within read_channel_reply(), where the register is read, before
returning it.
Signed-off-by: Leo (Sunpeng) Li <sunpeng.li@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Reviewed-by: Wesley Chalmers <Wesley.Chalmers@amd.com>
Reviewed-by: Duke Du <Duke.Du@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
In eDP spec, the min duration in LCDVDD on-off-on sequence should be
500ms, some BOE panels need 700ms to pass.
[HOW]
Add patch to wait more time when eDP power on.
Signed-off-by: Hugo Hu <hugo.hu@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
- define new dpcd address in drm
- implement new members in dpcd_caps to store values read from new dpcd address
Signed-off-by: Alvin lee <alvin.lee3@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
- Removed dal/dm/dc loggers from linux, switched to kernel prints
- Modified functions that used these directly to use macros
- dc_logger support is completely dropped from Linux
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Currently we still go through DC code that does error checking, retries,
etc. There's no need for that since DRM already does that for us. This
simplifies the code a bit and makes it easier to debug.
This also ensures we correctly tell DRM how many bytes have actually
been read, as we should. This allows DRM to correctly read the EDID on
the Chamelium DP port.
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
DRM's DP helpers take care of dealing with the error code for us. In
order not to step on each other's toes we'll need to be able to simply
read auch channel replies without further logic based on return values.
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Sun peng Li <Sunpeng.Li@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Access to GPIO needs to be serialized. Aux transactions are already
serialized in DRM but we also need to serialize access to the GPIO pin
for purposes of DP dongle detection.
Call is_dp_sink_present through DM so we can lock correctly. This
follows the same pattern used for DPCD transactions.
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Tony Cheng <tony.cheng@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Eric Bernstein <eric.bernstein@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Hugo Hu <hugo.hu@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
in case we have very few pins in the table, check fails and we can't boot
Signed-off-by: Tony Cheng <tony.cheng@amd.com>
Reviewed-by: Yongqiang Sun <yongqiang.sun@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
add generic indirect register access following our register access pattern
this will make it easier to review code and programming sequence,
with all the complexity hidden in macro
Signed-off-by: Tony Cheng <tony.cheng@amd.com>
Reviewed-by: Yongqiang Sun <yongqiang.sun@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
we were using 6 instances based on i2caux_dce110.c
[HOW]
pass in how many instances to ctor
Signed-off-by: Tony Cheng <tony.cheng@amd.com>
Reviewed-by: Yongqiang Sun <yongqiang.sun@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
expose dc function to be called by linux dm
Signed-off-by: Hersen Wu <hersenxs.wu@amd.com>
Reviewed-by: Sun peng Li <Sunpeng.Li@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Megachip dockings accesses ddc line through display driver when
installing FW. Previously, we would fail every transaction because
link attached to mst branch did not have their ddc transaction type
set.
[How]
Set ddc transaction type when mst branch is connected.
Signed-off-by: Eric Yang <Eric.Yang2@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Tony Cheng <tony.cheng@amd.com>
Reviewed-by: Yongqiang Sun <yongqiang.sun@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Separate HUBP surface size and rotation/mirror programming so that
HUBP revision without mirror/rotation do not access those register
fields.
Signed-off-by: Eric Bernstein <eric.bernstein@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit cc19514113.
This commit was problematic on other OSes. The real solution is to
leave all the error checking to DRM and don't do it in DC, which is
addressed by "Return aux replies directly to DRM" later in this patchset.
v2: Add reason for revert.
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 8a61bc085f.
Need to revert "make dm_dp_aux_transfer return payload bytes instead of
size", which this commit is based on. That commit was problematic on
other OSes. The real solution is to leave all the error checking to DRM
and don't do it in DC, which is addressed by "Return aux replies
directly to DRM" later in this patchset.
v2: Add reason for revert.
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
const to avoid hard-to-find bugs where some function overrides a
function pointer.
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It is good practice to make global function tables const to avoid
accidental override.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Otherwise we try to program hardware with the wrong watermark functions
when multiple DCE generations are installed in one system.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add suffix ULL to constant 5 and cast variables target_pix_clk_khz and
feedback_divider to uint64_t in order to avoid multiple potential integer
overflows and give the compiler complete information about the proper
arithmetic to use.
Notice that such constant and variables are used in contexts that
expect expressions of type uint64_t (64 bits, unsigned). The current
casts to uint64_t effectively apply to each expression as a whole,
but they do not prevent them from being evaluated using 32-bit
arithmetic instead of 64-bit arithmetic.
Also, once the expressions are properly evaluated using 64-bit
arithmentic, there is no need for the parentheses that enclose
them.
Addresses-Coverity-ID: 1460245 ("Unintentional integer overflow")
Addresses-Coverity-ID: 1460286 ("Unintentional integer overflow")
Addresses-Coverity-ID: 1460401 ("Unintentional integer overflow")
Fixes: 4562236b3b ("drm/amd/dc: Add dc display driver (v2)")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
That change was a merge gone bad.
This reverts commit cb1d7eacb5.
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The ->info[] array has DAL_IRQ_SOURCES_NUMBER elements so this condition
should be >= instead of > or we could read one element beyond the end of
the array.
Fixes: 4562236b3b ("drm/amd/dc: Add dc display driver (v2)")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The wrong enum type is used to initialize the result, leading to a
warning when using clang:
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_link_dp.c:1998:26: warning:
implicit conversion from enumeration type 'enum ddc_result' to different
enumeration type 'enum dc_status' [-Wenum-conversion]
enum dc_status result = DDC_RESULT_UNKNOWN;
~~~~~~ ^~~~~~~~~~~~~~~~~~
1 warning generated.
Initialization of result is unnecessary anyway, just drop the
initialization.
Signed-off-by: Stefan Agner <stefan@agner.ch>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
use worse case watermark (consider both DCC and VM)
to keep golden consistent regardless of DCC
Signed-off-by: Tony Cheng <tony.cheng@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Tony Cheng <tony.cheng@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In case of roation, width and height in viewport is difference
between viewport and h_active and v_active, while this is not scaling.
The right way is check ratios in scaling data,
to determine it is a scaling case or not.
Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Currently dcn1 will not switch between watermark sets so we can
save time by not calculating 3 extra sets.
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Set the powerplay debug flag to false for both Windows and Linux
to allow the calls to pplib. So we can retrieve the clock values
from powerplay instead of using default hardcoded values.
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
- Fixing integer overflow bug in wait_for_fbc_state_changed()
- Correct the max value of retries for the corresponding warning
Signed-off-by: Roman Li <Roman.Li@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Tony Cheng <tony.cheng@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Tony Cheng <tony.cheng@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Tony Cheng <tony.cheng@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
DML does not calculate chroma values for RQ when surface is not YUV, but DC
will unconditionally use the uninitialized values for HW programming.
This does not cause visual corruption since HW will ignore garbage chroma
values when surface is not YUV, but causes presubmission tests to fail
golden value comparison.
Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com>
Signed-off-by: Eryk Brol <eryk.brol@amd.com>
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This will prevent watermarks from lowering when unsafe to do so.
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This fixes incorrect clock caching and by extension fixes
the clock reporting.
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Eric Yang <eric.yang2@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Eric Yang <eric.yang2@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Also cleanup command_table2.c. No need for a lot of forward
declarations.
Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Reviewed-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This removes redundant set_bandwidth calls as well
as fixes a bug in post_set_address_update where dcn1
would never get to lower clocks.
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Nikola Cornij <Nikola.Cornij@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
No functional change.
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Nikola Cornij <Nikola.Cornij@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
No functional change.
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
No functional change.
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Nikola Cornij <Nikola.Cornij@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cleans up dcn_bw_output to only contain calculated info,
actual programmed values will now be stored in respective blocks.
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Nikola Cornij <Nikola.Cornij@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In case of tg count not equal to FE pipe count, if use pipe count to iterate
the tgs, it will cause BSOD.
Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
DM powerplay calls for DCN10 allowing to bypass PPLib
and call directly to the SMU functions.
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Tony Cheng <tony.cheng@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This change moves dcn clock programming(with exception of dispclk)
into dccg. This should have no functional effect.
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The goal of this change is to move clock programming and voltage
requests to a single function. As of this change only dce is affected.
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This will avoid structs with duplicate information. Also
removes pixel clock voltage request. This has no effect since
pixel clock does not affect dcn voltage and this function only
matters for dcn.
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
First feature request for 4.19. Highlights:
- Add initial amdgpu documentation
- Add initial GPU scheduler documention
- GPU scheduler fixes for dying processes
- Add support for the JPEG engine on VCN
- Switch CI to use powerplay by default
- EDC support for CZ
- More powerplay cleanups
- Misc DC fixes
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180621161138.3008-1-alexander.deucher@amd.com
getrawmonotonic64() is deprecated because of the nonstandard naming.
The replacement functions ktime_get_raw_ns() also simplifies the callers.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Number of OPPs to be instantiated is based on number
of timing generators, not number of pipes.
Signed-off-by: Eric Bernstein <eric.bernstein@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove setting DP_DB_DISABLE to avoid issues when changing
bit depth after vbios take over.
Refactor code to perform single register update for both
pixel encoding and component depth fields.
Signed-off-by: Eric Bernstein <eric.bernstein@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alvin lee <alvin.lee3@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It is used when curve register settings are generated
by 'matlab', i.e. bypass color module calculation.
Signed-off-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We'd like to use some of them in dc_link_ddc and amdgpu_dm and should
have them available in dc_ddc_types.h.
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update stream encoder based on feedback from HW team.
Signed-off-by: Eric Bernstein <eric.bernstein@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Extract edid's checksum and send it back for verification if EDID_TEST
is requested.
Also added a flag for EDID checksum write in TEST_RESPONSE structure,
and simple spelling fix.
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Just enable it always. This was leftover from feature
bring up.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Tony Cheng <tony.cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update MSA MISC1 bit 6 programming to handle YCbCr 4:2:0
and BT2020 cases.
Signed-off-by: Eric Bernstein <eric.bernstein@amd.com>
Reviewed-by: Hersen Wu <hersenxs.wu@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Yasir Al Shekerchi <YasirAl.Shekerchi@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Basic framework:
- caps for reporting dynamic HDR metadata support
- allocation of frame buffer memory and storage
Signed-off-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
DP_SINK_STATUS_ESI range data is not continual, but rather than
getting it in two AUX reads, it's quicker to read more bytes in a
AUX read and then memcpy the required fields (it's only 8 more
bytes to read).
Signed-off-by: Nikola Cornij <nikola.cornij@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Eric Bernstein <eric.bernstein@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This change shorten wait time when HPD LOW. With HPD LOW, without this
change, AUX routine delay is 450us. With this change, it is 42us.
Signed-off-by: Hersen Wu <hersenxs.wu@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Tony Cheng <tony.cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This change will allow the viewport overlap to apply to rotated/
mirrored surfaces. Viewport overlap results in extra pixels being
added to viewport allowing the first few pixels to be scaled as
if there is no cut-off(mpo or pipe split) and allows us to get matching
crc's between scaled split and unsplit outputs of the same thing.
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Currently, the maximum value that *counter* can reach is 255, and
code at line 150: while (counter < 1000) { implies a bigger value
could be expected.
Fix this by changing the type of variable *counter* from uint8_t
to uint16_t.
Addresses-Coverity-ID: 1470030 ("Operands don't affect result")
Fixes: 2b6199a1d1 ("drm/amd/display: replace msleep with udelay in fbc path")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-----BEGIN PGP SIGNATURE-----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=YBRl
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2018-06-15' of git://anongit.freedesktop.org/drm/drm
Pull amd drm fixes from Dave Airlie:
"Just a single set of AMD fixes for stuff in -next for -rc1"
* tag 'drm-next-2018-06-15' of git://anongit.freedesktop.org/drm/drm: (47 commits)
drm/amd/powerplay: Set higher SCLK&MCLK frequency than dpm7 in OD (v2)
drm/amd/powerplay: remove uncessary extra gfxoff control call
drm/amdgpu: fix parsing indirect register list v2
drm/amd/include: Update df 3.6 mask and shift definition
drm/amd/pp: Fix OD feature enable failed on Vega10 workstation cards
drm/amd/display: Fix stale buffer object (bo) use
drm/amd/pp: initialize result to before or'ing in data
drm/amd/powerplay: fix wrong clock adjust sequence
drm/amdgpu: Grab/put runtime PM references in atomic_commit_tail()
drm/amd/powerplay: fix missed hwmgr check warning before call gfx_off_control handler
drm/amdgpu: fix CG enabling hang with gfxoff enabled
drm/amdgpu: fix clear_all and replace handling in the VM (v2)
drm/amdgpu: add checking for sos version
drm/amdgpu: fix the missed vcn fw version report
Revert "drm/amdgpu: Add an ATPX quirk for hybrid laptop"
drm/amdgpu/df: fix potential array out-of-bounds read
drm/amdgpu: Fix NULL pointer when load kfd driver with PP block is disabled
drm/gfx9: Update gc goldensetting for vega20.
drm/amd/pp: Allow underclocking when od table is empty in vbios
drm/amdgpu/display: check if ppfuncs exists before using it
...
DP 1.4 compliance now requires that registers at DP_SINK_COUNT_ESI range
(0x2002-0x2003, 0x200c-0x200f) are read instead of DP_SINK_COUNT range
(0x200-0x2005.
Signed-off-by: Nikola Cornij <nikola.cornij@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
DP 1.4 compliance requires 16 bytes to be read when reading link caps,
i.e. it requires DP_ADAPTER_CAP to be included. Included it for all DP
versions because reading more than required won't fail.
Signed-off-by: Nikola Cornij <nikola.cornij@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This change will fix wb and display scaling when ratios of
4 or more are involved
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add register programming to support TMZ and DCC on
secondary surfaces.
Signed-off-by: Eric Bernstein <eric.bernstein@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add register programming to support 16bpc component
depth for DP.
Signed-off-by: Eric Bernstein <eric.bernstein@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixing warning on dce10 with HDMI display.
Signed-off-by: Roman Li <Roman.Li@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
FBC enabling and disabling path has msleep which leads to
BUG hit when called in atomic context, hence this patch
replaces msleeps with udelays appropriately.
Signed-off-by: Shirish S <shirish.s@amd.com>
Signed-off-by: Roman Li <Roman.Li@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Create DCN1 link encoder files and update AUX and HPD register access.
Signed-off-by: Eric Bernstein <eric.bernstein@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We want to keep underflow sticky bit on for the longevity tests outside
of test environment. For debug purposes it is, however, useful to clear
underflow status after the test that caused it so that the following
tests are not affected. This change fullfils both requirements by clearing
the underflow only from within Windows or Diags test environment.
Signed-off-by: Nikola Cornij <nikola.cornij@amd.com>
Reviewed-by: Nikola Cornij <Nikola.Cornij@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Jun Lei <Jun.Lei@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Xingyue Tao <xingyue.tao@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Also print HUBP info only if pipe enabled. This fixes having different
DTN logs for different test sequences.
Signed-off-by: Nikola Cornij <nikola.cornij@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Yue Hin Lau <Yuehin.Lau@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
- Adds int max_downscale_src_width in dc struct
- Checks and does not support if downscale size is more than 4k (width > 3840)
Signed-off-by: Xingyue Tao <xingyue.tao@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Eric Bernstein <eric.bernstein@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
for any reason, if driver detects HUBP underflow,
if a debug option enabled to enable recovery.
it will kick in a sequence of recovery.
Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove dependency on the old FREESYNC_SW_STATS log mask used by DAL2
Also rename from profiling to displaystats
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
32.32 is redundant, 31.32 does everything we use 32.32 for
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Leftover from bringup. No need to keep it around for
upstream.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Leftover from bringup. No need to keep it around for
upstream.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Retrieve fuses to determine the availability of pipes, and
eliminate pipes that cannot be used.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Jerry (Fangzhi) Zuo <Jerry.Zuo@amd.com>
Reviewed-by: Hersen Wu <hersenxs.wu@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Feifei Xu <Feifei.Xu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Jerry (Fangzhi) Zuo <Jerry.Zuo@amd.com>
Reviewed-by: Hersen Wu <hersenxs.wu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Feifei Xu <Feifei.Xu@amd.com>
Main changes for 4.18. I'd like to do a separate pull for vega20 later
this week or next. Highlights:
- Reserve pre-OS scanout buffer during init for seemless transition from
console to driver
- VEGAM support
- Improved GPU scheduler documentation
- Initial gfxoff support for raven
- SR-IOV fixes
- Default to non-AGP on PowerPC for radeon
- Fine grained clock voltage control for vega10
- Power profiles for vega10
- Further clean up of powerplay/driver interface
- Underlay fixes
- Display link bw updates
- Gamma fixes
- Scatter/Gather display support on CZ/ST
- Misc bug fixes and clean ups
[airlied: fixup v3d vs scheduler API change]
Link: https://patchwork.freedesktop.org/patch/msgid/20180515185450.1113-1-alexander.deucher@amd.com
Signed-off-by: Dave Airlie <airlied@redhat.com>
FBC is not applicable for the underlay pipe,
hence disallow enabling and disabling of the same.
This also fixes the BUG hit of calling sleep in
atomic context.
Signed-off-by: Shirish S <shirish.s@amd.com>
Reviewed-by: Roman Li <Roman.Li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Allocating up to 32 physically contiguous pages can easily fail (and has
failed for me), and isn't necessary anyway.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The two ranges overlap.
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Things such as mis-indent, and space at beginning of line.
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We are not sure these calculations will never need negative numbers. Use
signed integers and warn and cap at 0 if this ever happens.
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Tony Cheng <tony.cheng@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Martin Tsai <Martin.Tsai@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To ensure the infoframe gets updated during an SDR/HDR switch
this change adds a new function to to check if the HDR static
metadata has changed and adds it to is_timing_changed and
pipe_need_reprogram checks
Signed-off-by: Julian Parkin <jparkin@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Tony Cheng <tony.cheng@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
remove limit YUV422 color depth to 24bits which is
workaround for old ASIC
Signed-off-by: Hersen Wu <hersenxs.wu@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Also rename otg_blank to blank_pixel_data.
Signed-off-by: Eric Bernstein <eric.bernstein@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Eric Bernstein <eric.bernstein@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Check in code was incorrect, and infopacket is only transmitted after update
function is called multiple times.
Purpose of the function was to check if infopackets are being enabled, and
then enable global control. Fix the code to do this.
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Some eDP displays use the extra link rate table to advertise link rate
support. If they do that they don't need to provide link rate through
the usual registers. Since we don't currently have support for the extra
link rate table default to HBR2 for the display in this.
Note that this is a HACK. Ultimately we need to teach DC to use the
extra link rate table.
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Implement device IDs for VEGAM
Signed-off-by: Jerry (Fangzhi) Zuo <Jerry.Zuo@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Linux doesn't know lid state, better to check dig enable
value from register.
Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Yue Hin Lau <Yuehin.Lau@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use lid state only to determine fast boot optimization is not enough.
For S3/Resume, due to bios isn't involved in boot, eDP wasn't
light up, while lid state is open, if do fast boot optimization,
eDP panel will skip enable link and result in black screen after boot.
And becasue of bios isn't involved, no matter UEFI or Legacy boot,
BIOS_SCRATCH_3 value should be 0, use this to determine the case.
Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For legacy enable boot up with lid closed, eDP information couldn't be
read correctly via SBIOS_SCRATCH_3 results in eDP cannot be light up
properly when open lid.
Check lid state instead can resolve the issue.
Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: Eric Yang <eric.yang2@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Hardware understands the regamma LUT as a piecewise linear function,
with points spaced exponentially along the range. We previously
programmed the LUT for range [2^-10, 2^0). This causes (normalized)
color values of 1 (=2^0) to miss the programmed LUT, and fall onto the
end region.
For DCE, the end region is extrapolated using a single (base, slope)
pair, using the max y-value from the last point in the curve as base.
This presents a problem, since this value affects all three color
channels. Scaling down the intensity of say - the blue regamma curve -
will not affect it's end region. This is especially noticiable when
using RedShift. It scales down the blue and green channels, but leaves
full-intensity colors unshifted.
Therefore, extend the range to cover [2^-10, 2^1) by programming another
hardware segment, containing only one point. That way, we won't be
hitting the end region.
Note that things are a bit different for DCN, since the end region can
be set per-channel.
Signed-off-by: Leo (Sunpeng) Li <sunpeng.li@amd.com>
Reviewed-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Eric Bernstein <eric.bernstein@amd.com>
Reviewed-by: Nikola Cornij <Nikola.Cornij@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Adding missing call to cache current backlight values.
Otherwise the brightness resets to default value on resume.
Signed-off-by: Roman Li <Roman.Li@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Eric Yang <Eric.Yang2@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
is_blanked() hook is a dummy one for underlay pipe, hence
when called, it loops for ~300ms at boot.
This patch removes this dummy call and adds missing checks.
Signed-off-by: Shirish S <shirish.s@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Before programming the input gamma, check that we're not using the
identity correction.
Signed-off-by: Leo (Sunpeng) Li <sunpeng.li@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Creating plane will also allocate gamma and input TF
Creating stream will also allocate outputTF
Fix issue with gamma not applied
OS may call SetGamma before surface committed, so need to store
in target and apply later.
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove some unnecessary TF definitions from update structures
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Updated HDR Static Metadata to directly take info packet raw
Updating Infopacket does not require Passive
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-----BEGIN PGP SIGNATURE-----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=WE2n
-----END PGP SIGNATURE-----
Merge tag 'drm-fixes-for-v4.17-rc1' of git://people.freedesktop.org/~airlied/linux
Pull drm fixes from Dave Airlie:
"One omap, and one alsa pm fix (we merged the breaking patch via drm
tree).
Otherwise it's two bunches of amdgpu fixes, removing an unneeded file,
some DC fixes, HDMI audio regression fix, and some vega12 fixes"
* tag 'drm-fixes-for-v4.17-rc1' of git://people.freedesktop.org/~airlied/linux: (27 commits)
Revert "drm/amd/display: disable CRTCs with NULL FB on their primary plane (V2)"
Revert "drm/amd/display: fix dereferencing possible ERR_PTR()"
drm/amd/display: Fix regamma not affecting full-intensity color values
drm/amd/display: Fix FBC text console corruption
drm/amd/display: Only register backlight device if embedded panel connected
drm/amd/display: fix brightness level after resume from suspend
drm/amd/display: HDMI has no sound after Panel power off/on
drm/amdgpu: add MP1 and THM hw ip base reg offset
drm/amdgpu: fix null pointer panic with direct fw loading on gpu reset
drm/radeon: add PX quirk for Asus K73TK
drm/omap: fix crash if there's no video PLL
drm/amdgpu: Fix memory leaks at amdgpu_init() error path
drm/amdgpu: Fix PCIe lane width calculation
drm/radeon: Fix PCIe lane width calculation
drm/amdgpu/si: implement get/set pcie_lanes asic callback
drm/amdgpu: Add support for SRBM selection v3
Revert "drm/amdgpu: Don't change preferred domian when fallback GTT v5"
drm/amd/powerply: fix power reading on Fiji
drm/amd/powerplay: Enable ACG SS feature
drm/amdgpu/sdma: fix mask in emit_pipeline_sync
...
Hardware understands the regamma LUT as a piecewise linear function,
with points spaced exponentially along the range. We previously
programmed the LUT for range [2^-10, 2^0). This causes (normalized)
color values of 1 (=2^0) to miss the programmed LUT, and fall onto the
end region.
For DCE, the end region is extrapolated using a single (base, slope)
pair, using the max y-value from the last point in the curve as base.
This presents a problem, since this value affects all three color
channels. Scaling down the intensity of say - the blue regamma curve -
will not affect it's end region. This is especially noticiable when
using RedShift. It scales down the blue and green channels, but leaves
full-intensity colors unshifted.
Therefore, extend the range to cover [2^-10, 2^1) by programming another
hardware segment, containing only one point. That way, we won't be
hitting the end region.
Note that things are a bit different for DCN, since the end region can
be set per-channel.
Signed-off-by: Leo (Sunpeng) Li <sunpeng.li@amd.com>
Reviewed-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Adding missing call to cache current backlight values.
Otherwise the brightness resets to default value on resume.
Signed-off-by: Roman Li <Roman.Li@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: Yongqiang Sun <yongqiang.sun@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Eric Bernstein <eric.bernstein@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Instead of user set brightness with range of percentage,
HLK test set brightness level with range of normal, this will result in
HLK test case set brightness from 0 to 255, DC set brightness with ramp is 0,
and disabled ramp change which will fail the HLK test.
Fix:
In case of unblank stream and turn on edp, change brightness level in
stream to 0xFFFFFFFF(actural maximum level is 0xFF), use that value as
a flag to recogonize this the case of resume from S3.
Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: Eric Yang <eric.yang2@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We would otherwise fallback to the timing, which would always give us
identity.
Signed-off-by: Jun Lei <Jun.Lei@amd.com>
Reviewed-by: Wesley Chalmers <Wesley.Chalmers@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Link bw required is reduced when we have chroma subsampling.
Signed-off-by: Eric Yang <Eric.Yang2@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Jun Lei <Jun.Lei@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Move DCN1 implementation of stream encoder to new file (instead
of common dce_stream_encoder.c).
Cleanup code related to different implementation due to register
definition differences.
Signed-off-by: Eric Bernstein <eric.bernstein@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To prevent future optimization related bugs, just set all update
flags when we have a full update, since we know we want to reprogram
everything in that case.
Signed-off-by: Eric Yang <Eric.Yang2@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
As per eDP 1.4 spec, there must be at least 500ms delay
between eDP power off and on.
This change added time stamp when edp power off, which can
be used to calculate duration time when edp power on.
If duration less than 500ms, add a wait.
Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Created Macros for DC_LOG_XXX to pr_debug() & DRM_DEBUG_KMS.
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
CC: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In order to remove the cgs wrapper functions for atombios api.
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
- Added double buffer mechanism to output CSC
so that there's no tearing when adjusting brightness
from Radeon settings
Signed-off-by: Xingyue Tao <xingyue.tao@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: SivapiriyanKumarasamy <sivapiriyan.kumarasamy@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Move this out of the HW includes to dc_types.h
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
- Video playback shows tearing when adjusting
brightness through radeon custom settings.
- Now added double buffer mechanism to switch
input CSC from register buffer ICSC and COMA
- Improved tab alignment
Signed-off-by: Xingyue Tao <xingyue.tao@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Eric Bernstein <eric.bernstein@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Correct the types used for printing in logs. This is needed for adding
dynamic printing (LINUX), otherwise we get warnings.
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The current mpcc insert/remove logic does not support updating
only a single mpcc. So when pixel alpha changed but no full update
we can mistakenly shuffle the mpcc layering order. With this change
we will only insert/remove mpcc if there is full update.
Signed-off-by: Eric Yang <Eric.Yang2@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Override the memory input functions for dce120 not to program
new registers on dce112.
This will fix warnings thrown on Polaris asics.
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Adding assert to prevent possible null deref warning.
Only can happen under abnormal circumstances.
Signed-off-by: Roman Li <Roman.Li@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Tony Cheng <tony.cheng@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Registers are added and defined.
Programmed to default values.
Stutter level watermark register is being set to calculated value.
Urgent level registers are programmed to the same as urgency.
The programming of the registers is not expected to have any
functional difference in performance.
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Adding the stutter_entry_wm object to dce_bw_output struct
and populating it with bw calculations data
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Using the three functions we can print the dceip, vbios and data struct
for bandwidth calculations. This is useful for debugging bandwidth
calculation issues without a debugger
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Nikola Cornij <nikola.cornij@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Also separate register address initialization between ASICs for the
registers that were removed in scaled-down variation of the ASIC.
Signed-off-by: Nikola Cornij <nikola.cornij@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Some DP panel not detected intermittently due to read dpcd
caps failed when doing hot plug.
[root cause] DC_HPD_CONNECT_INT_DELAY is set to 0, not delay
after HPD toggle and read dpcd data, while some panel need 4ms defer
to read.
[solution] Add a retry when read failed.
Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Tony Cheng <tony.cheng@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Martin Tsai <martin.tsai@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Pull trivial tree updates from Jiri Kosina.
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial:
kfifo: fix inaccurate comment
tools/thermal: tmon: fix for segfault
net: Spelling s/stucture/structure/
edd: don't spam log if no EDD information is present
Documentation: Fix early-microcode.txt references after file rename
tracing: Block comments should align the * on each line
treewide: Fix typos in printk
GenWQE: Fix a typo in two comments
treewide: Align function definition open/close braces
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJauCZfAAoJEHm+PkMAQRiGWGUH/2rhdQDkoJpYWnjaQkolECG8
MxpGE7nmIIHxQcbSDdHTGJ8IhVm6Z5wZ7ym/PwCDTT043Y1y341sJrIwL2/nTG6d
HVidk8hFvgN6QzlzVAHT3ZZMII/V9Zt+VV5SUYLGnPAVuJNHo/6uzWlTU5g+NTFo
IquFDdQUaGBlkKqby+NoAFnkV1UAIkW0g22cfvPnlO5GMer0gusGyVNvVp7TNj3C
sqj4Hvt3RMDLMNe9RZ2pFTiOD096n8FWpYftZneUTxFImhRV3Jg5MaaYZm9SI3HW
tXrv/LChT/F1mi5Pkx6tkT5Hr8WvcrwDMJ4It1kom10RqWAgjxIR3CMm448ileY=
=YKUG
-----END PGP SIGNATURE-----
Backmerge tag 'v4.16-rc7' into drm-next
Linux 4.16-rc7
This was requested by Daniel, and things were getting
a bit hard to reconcile, most of the conflicts were
trivial though.
Some functions definitions have either the initial open brace and/or
the closing brace outside of column 1.
Move those braces to column 1.
This allows various function analyzers like gnu complexity to work
properly for these modified functions.
Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Paul Moore <paul@paul-moore.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Acked-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
v2: add Vega12 support
1. remove struct cgs_os_ops
2. delete cgs_linux.h
3. refine the irq code for vega10, can fix set pp table
failed issue.
4. add common smu irq process function
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Junwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
VG12 shows minor revision version of 2 which is not handled in
bios_parser_get_firmware_info() routine.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Jerry (Fangzhi) Zuo <Jerry.Zuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Switch the order of parameters being set for depth
and mode of truncation, as it previously was not correct
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The truncation isn't being programmed if the truncation
depth is set to 2, it causes an issue with dce11.2 asic
using 6bit eDP panel. It required to truncate 12:10 in order to
perform spatial dither 10:6.
This change will allow 12:10 truncation to be enabled.
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
bad case won't follow normal sense, it will not enable vga1 as usual, but vga2,3,4 is on.
Signed-off-by: Clark Zheng <clark.zheng@amd.com>
Reviewed-by: Tony Cheng <tony.cheng@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
bad case won't follow normal sense, it will not enable vga1 as usual, but vga2,3,4 is on.
Signed-off-by: Clark Zheng <clark.zheng@amd.com>
Reviewed-by: Tony Cheng <tony.cheng@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We have unused variables being populated when notifying pplib.
This change amends that.
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
root cause:
DMCU try to perform a smoothness brightness change.Incorrect initial
brightness level causes the 1 sec dim.
Change:
Cache brightness level in stream, and clear it when edp backlight on.
If brightness level in stream is 0, set brightness with ramp value is 0.
DMCU will set the brightness without smoothness transition.
v2: squash in null pointer fix (Harry)
Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Jerry (Fangzhi) Zuo <Jerry.Zuo@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
