If a fence allocation fails in a blocking context, we will sleep on the
fence as a last resort. We can therefore allow ourselves to fail and
sleep on the fence instead of triggering a system-wide oom. This allows
us to throttle malicious clients that are consuming lots of system
resources by capping the amount of memory used by fences.
Testcase: igt/gem_shrink/execbufX
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171212180652.22061-2-chris@chris-wilson.co.uk
As kmalloc is allowed to block (if given the right flags), mark up the
two i915_sw_fence routines that may call kmalloc as potential sleeping
routines.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171212180652.22061-1-chris@chris-wilson.co.uk
It is illegal to perform an immediate free of the struct irq_work from
inside the irq_work callback (as irq_work_run_list modifies work->flags
after execution of the work->func()). As we use the irq_work to
coordinate the freeing of the callback from two different softirq paths,
we need to defer the kfree from inside our irq_work callback, for which
we can use kfree_rcu.
Fixes: 81c0ed21aa ("drm/i915/fence: Avoid del_timer_sync() from inside a timer")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171213094802.28243-1-chris@chris-wilson.co.uk
If wait_for_engines() fails and we resort to declaring the HW wedged,
dump the engine state for debugging.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171211194135.27095-2-chris@chris-wilson.co.uk
Extract the timeout we use in i915_gem_idle_work_handler() and reuse it
for wait_for_engines() in i915_gem_wait_for_idle(). It too has the same
problem in sometimes having to wait for an extended period before the HW
settles, so make use of the same timeout.
References: 5427f20785 ("drm/i915: Bump wait-times for the final CS interrupt before parking")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171211194135.27095-1-chris@chris-wilson.co.uk
It never meant what it said, as it was always the total size of the
Global GTT and not a limit upon memory usage. Originally it served as a
quick guide to the largest batch that could be submitted by userspace,
an approximation to its maximum RSS, but was phrased badly. Today with
the 48b ppgtt, it is even more meaningless. Replace with a more specific
debug message; those wanting to know how much "video ram" they have
should consult the userspace libraries for the relevant approximation.
v2: Rebase
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171212113532.22574-1-chris@chris-wilson.co.uk
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Since on gen2, we do not universally have a GPU reset implementation, we
fail i915_reset() at intel_has_gpu_reset(). However, this is also
intentionally disabled for CI testing and so it only has a debug
message. Promote that debug message to a user-facing error message that
should explain why their machine became unusable following the GPU hang.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171211204040.22858-1-chris@chris-wilson.co.uk
this fix the VCE world switch hang issue
Signed-off-by: Frank Min <Frank.Min@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Should be 0.
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We are polling so no need for INT.
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
this VRAM evict is not needed and also cost 2seconds
to finish because the IRQ is software side disabled
before it.
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
fix calculation.
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
shrink_pages is in unit of Order after ttm_page_pool_free,
but it is used by nr_free in next round so need change
it into native page unit
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Roger He <Hongbo.He@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
And also provide the level for which we need a PDE.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Now instead of one submission for each PDE batch them together over all
PDs who need an update.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
No more double house keeping.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Not needed any more.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We can do this with a simple mask as well.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On Tonga VF, there're 2 sources updating wptr registers for
sdma3: 1) polling mem and 2) doorbell. When doorbell and polling
mem are both enabled on sdma3, there will be collision hit in
occasion between those two sources when ucode and h/w are doing
the updating on wptr register in parallel. Issue doesn't happen
on CP GFX/Compute since CP drops all doorbell writes when VF is
inactive. So enable polling mem and don't use doorbell for SDMA3.
Signed-off-by: Pixel Ding <Pixel.Ding@amd.com>
Reviewed-by: Monk Liu <monk.liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Horrible inefficient, but avoids problems when the root PD size becomes
to big.
v2: remove incr as well.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <davdi1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
That doesn't hit any more most of the time anyway.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Torture test for MM and VM support, can be used to evict all VRAM while
the system is under load.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove the superflous .debugfs_init callback and register all files in
amdgpu_device.c in just one function.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Keeps things consistent now that we make use of struct resource. This
should keep us covered in case we ever get huge amounts of stolen
memory.
v2: bunch of missing conversions (Chris)
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171211151822.20953-10-matthew.auld@intel.com
Kick it out of i915_ggtt and keep it grouped with dsm and dsm_reserved,
where it makes the most sense.
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171211151822.20953-9-matthew.auld@intel.com
Now that we are using struct resource to track the stolen region, it is
more convenient if we track the mappable region in a resource as well.
v2: prefer iomap and gmadr naming scheme
prefer DEFINE_RES_MEM
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171211151822.20953-8-matthew.auld@intel.com
Now that we are using struct resource to track the stolen region, it is
more convenient if we track the reserved portion of that region in a
resource as well.
v2: s/<= end + 1/< end/ (Chris)
v3: prefer DEFINE_RES_MEM
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171211151822.20953-7-matthew.auld@intel.com
Now that we are using struct resource to track the stolen region, it is
more convenient if we track dsm in a resource as well.
v2: check range_overflow when writing to 32b registers (Chris)
pepper in some comments (Chris)
v3: refit i915_stolen_to_dma()
v4: kill ggtt->stolen_size
v5: some more polish
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171211151822.20953-6-matthew.auld@intel.com
We duplicate the stolen discovery code in early-quirks and in i915,
however now that the stolen region is exported as a resource from
early-quirks we can nuke the duplication.
v2: check overflows_type
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171211151822.20953-5-matthew.auld@intel.com
If we attempt to wake up a waiter, who is currently checking the seqno
it will be in the TASK_INTERRUPTIBLE state and ttwu will report success.
However, it is actually awake and functioning -- so delay reporting the
actual wake up until it sleeps. This fixes some spurious claims of
missed_breadcrumbs when running under heavy load; i.e. sufficient load to
preempt away the newly woken waiter before they complete their checks.
However, it does so at the cost of a rare false negative; where the
waiter changes between the check and ttwu -- the only way to fix that
would be to extend the reporting from ttwu where the check could be done
atomically.
v2: Defend against !CONFIG_SMP
v3: Don't filter out calls to wake_up_process
v4: Drop risky microoptimisation to skip wakeups
Testcase: igt/drv_missed_irq # sanity check we do detect missed_breadcrumb()
Testcase: igt/gem_concurrent_blit # for generating false positives
References: https://bugs.freedesktop.org/show_bug.cgi?id=100007
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171209124710.1606-1-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
The intent here was that we would be listening to
i915_gem_request_unsubmit in order to cancel the signaler quickly and
release the reference on the request. Cancelling the signaler is done
directly via intel_engine_cancel_signaling (called from unsubmit), but
that does not directly wake up the signaling thread, and neither does
setting the request->global_seqno back to zero wake up listeners to the
request->execute waitqueue. So the only time that listening to the
request->execute waitqueue would wake up the signaling kthread would be
on the request resubmission, during which time we would already receive
wake ups from rejoining the global breadcrumbs wait rbtree.
Trying to wake up to release the request remains an issue. If the
signaling was cancelled and no other request required signaling, then it
is possible for us to shutdown with the reference on the request still
held. To ensure that we do not try to shutdown, leaking that request, we
kick the signaling threads whenever we disarm the breadcrumbs, i.e. on
parking the engine when idle.
v2: We do need to be sure to release the last reference on stopping the
kthread; asserting that it has been dropped already is insufficient.
Fixes: d6a2289d9d ("drm/i915: Remove the preempted request from the execution queue")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171208121033.5236-1-chris@chris-wilson.co.uk
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Even for the mock i915 device, we need to initialise the
drm.mode_config, as we may ultimately query whether there are any KMS
users deep in the bowels of some paths (e.g. eviction). As we initialise
drm.mode_config we must cleanup after ourselves!
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171209210835.32609-1-chris@chris-wilson.co.uk
In case function skl_format_to_drm returns -EINVAL, fmt turns into a huge
number as fmt is of type u32, hence there is an out-of-bounds read when
using fmt as an index for array skl_pixel_formats at line 225:
plane->bpp = skl_pixel_formats[fmt].bpp;
Fix this by comparing the value returned by function skl_format_to_drm
against the size of array skl_pixel_formats, so in case it is greater than
or equal to the number of items contained in skl_pixel_formats, print an
error message and return -EINVAL.
Addresses-Coverity-ID: 1462495
Addresses-Coverity-ID: 1462502 ("Out-of-bounds read")
Fixes: 9f31d1063b ("drm/i915/gvt: Add framebuffer decoder support")
Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
These 2 functions are coded by multiple person in multiple patches. The
'return' and 'goto err' are mix-used in same place, which cause the
function looks disorder. Unify to use only 'goto' so that the gvt lock
is acquired in one place and released in one place.
Signed-off-by: Pei Zhang <pei.zhang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Use drm_fb_cma_fbdev_init_with_funcs() and drm_fb_cma_fbdev_fini() which
relies on the fact that drm_device holds a pointer to the drm_fb_helper
structure. This means that the driver doesn't have to keep track of that.
Also use the drm_fb_helper functions directly.
Remove todo entry.
Cc: David Lechner <david@lechnology.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: David Lechner <david@lechnology.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Tested-by: David Lechner <david@lechnolgy.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171208193743.34450-11-noralf@tronnes.org
Add functions to report the vram_usage from the amdgpu_device
Signed-off-by: Kent Russell <kent.russell@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Some AMD motherboards without an APU have a broken CRAT table which
causes KFD initialization failures or incorrect information about
NUMA nodes, CPU cores or system memory. Ignore CRAT tables without
GPUs and rely on KFD's code to create a CRAT table for the CPU.
Signed-off-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Some systems have broken CRAT tables. Add a module option to ignore
a CRAT table.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
This is needed for enabling a user-mode workaround for an AQL queue
wrapping HW bug on Tonga.
Signed-off-by: Ben Goz <ben.goz@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
* Wrong value for max_waves_per_simd
* Missing ATC capability bit
Signed-off-by: Philip Cox <Philip.Cox@amd.com>
Signed-off-by: Kent Russell <kent.russell@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
For hardware blocks whose performance counters are accessed via MMIO
registers, KFD provides the support for those privileged blocks.
IOMMU is one of those privileged blocks. Most performance counter properties
required by Thunk are available at /sys/bus/event_source/devices/amd_iommu.
This patch adds properties to topology in KFD sysfs for information not
available in /sys/bus/event_source/devices/amd_iommu. They are shown at
/sys/devices/virtual/kfd/kfd/topology/nodes/0/perf/iommu/ formatted as
/sys/devices/virtual/kfd/kfd/topology/nodes/0/perf/<block>/<property>, i.e.
/sys/devices/virtual/kfd/kfd/topology/nodes/0/perf/iommu/max_concurrent.
For dGPUs, who don't have IOMMU, nothing appears under
/sys/devices/virtual/kfd/kfd/topology/nodes/0/perf.
Signed-off-by: Amber Lin <Amber.Lin@amd.com>
Signed-off-by: Kent Russell <kent.russell@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Generate and parse VCRAT tables for dGPUs in kfd_topology_add_device.
Some information that isn't available in the CRAT table is patched
into the topology after parsing.
HSA_CAP_DOORBELL_TYPE_1_0 is dependent on the ASIC feature
CP_HQD_PQ_CONTROL.SLOT_BASED_WPTR, which was not introduced in VI
until Carrizo. Report HSA_CAP_DOORBELL_TYPE_PRE_1_0 on Tonga ASICs.
v2: Added #include <linux/pci.h> to kfd_crat.c to make it compile
Signed-off-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Ben Goz <ben.goz@amd.com>
Signed-off-by: Amber Lin <Amber.Lin@amd.com>
Signed-off-by: Jay Cornwall <Jay.Cornwall@amd.com>
Signed-off-by: Kent Russell <kent.russell@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Currently, the KFD topology information is generated by parsing the CRAT
(ACPI) table. However, at present CRAT table is available only for AMD
APUs. To support CPUs on systems without a CRAT table, the KFD driver will
create a Virtual CRAT (VCRAT) table and then the existing code will parse
that table to generate topology.
Signed-off-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Change kfd_cache_properties.sibling_map[256] to
kfd_cache_properties.sibling_map[32]. Since, CRAT uses bitmap for
sibling_map, it is more efficient to use bitmap in the kfd structure
also.
Signed-off-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Only count memory banks in one place. Ignore redundant num_banks
entry in crat_subtype_computeunit.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Modify kfd_topology_enum_kfd_devices(..) function to support non-GPU
nodes. The function returned NULL when it encountered non-GPU (say CPU)
nodes. This caused kfd_ioctl_create_event and kfd_init_apertures to fail
for Intel + Tonga.
kfd_topology_enum_kfd_devices will now parse all the nodes and return
valid kfd_dev for nodes with GPU.
Signed-off-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Currently, CRAT parsing is intertwined with topology_device_list and
hence repeated calls to kfd_parse_crat_table() will fail. Decouple
kfd_parse_crat_table() and topology_device_list.
kfd_parse_crat_table() will parse CRAT and add topology devices to a
temporary list temp_topology_device_list and then
kfd_topology_update_device_list will move contents from temporary list to
master list.
Signed-off-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Kent Russell <kent.russell@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Reorganize and rename kfd_topology_get_crat_acpi function. In this way
acpi_get_table(..) needs to be called only once. This will also aid in
dGPU topology implementation.
Signed-off-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Kent Russell <kent.russell@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Take CRAT related functions out of kfd_topology.c and place them in
kfd_crat.c. This is the initial step of supporting more CRAT features,
i.e. creating virtual CRAT table for KFD devices without CRAT.
v2: Minor cleanup that was missed previously because code moved around
Signed-off-by: Amber Lin <Amber.Lin@amd.com>
Signed-off-by: Kent Russell <kent.russell@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Kobject created using kobject_create_and_add() can be freed using
kobject_put() when there is no referenece any more. However,
kobject memory allocated with kzalloc() has to set up a release
callback in order to free it when the counter decreases to 0.
Otherwise it causes memory leak.
Signed-off-by: Yong Zhao <yong.zhao@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Overwrite the active simd_count from KGD at driver loading time. This is
based on assumption that register GC_USER_SHADER_ARRAY_CONFIG won’t get
changed.
V2: remove the incorrect simd_count reported at loading module.
Signed-off-by: Flora Cui <flora.cui@amd.com>
Reviewed by: Yair Shachar< yair.shachar@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Add get_local_mem_info which provides more information about local
memory than get_vmem_size:
- public and private framebuffer size
- memory clock
Signed-off-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Ben Goz <ben.goz@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Comparing the state tested by intel_engine_is_idle() and printed by
intel_engine_dump(), the only bit not shown is whether or not the device
is wedged. Add that little bit of information to the pretty printer so
that if the engine fails to idle we can see why.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171208012303.25504-5-chris@chris-wilson.co.uk
Since a global reset affects the engine, include that along side the
per-engine reset counter when pretty printing the engine state in
intel_engine_dump().
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171208012303.25504-4-chris@chris-wilson.co.uk
Now that we have a common engine state pretty printer, we can use that
instead of the adhoc information printed when we miss a breadcrumb.
v2: Rearrange intel_engine_disarm_breadcrumbs() to avoid calling
intel_engine_dump() under the rb spinlock (Mika) and to pretty-print the
error state early so that we include the full list of waiters.
v3: Pass missed breadcrumb msg to pretty-printer as the header
v4: Preserve DRM_DEBUG_DRIVER filtering.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171208012303.25504-3-chris@chris-wilson.co.uk
Pass in a format string (and args) to specify the header to be emitted
along with the engine state when pretty-printing. This allows the header
to be emitted inside the drm_printer stream, so sharing the same prefix
and output characteristics (e.g. debug level and filtering).
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171208012303.25504-2-chris@chris-wilson.co.uk
When printing the execlist ports, we first print the ELSP header then
follow it with the pretty-printed request. Since switching to
drm_printer and show the output via printk, it automatically appends a
newline to each call (unlike the old seq_printf output). To avoid the
unwanted line break, construct the ELSP request header in a temporary
buffer.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171208012303.25504-1-chris@chris-wilson.co.uk
Chris requested this backmerge for a reconciliation on
drm_print.h between drm-misc-next and drm-intel-next-queued
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Remove the header where it's not used.
Acked-by: Christian Konig <christian.koenig@amd.com>
Signed-off-by: Shaoyun Liu <Shaoyun.Liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian Konig <christian.koenig@amd.com>
Signed-off-by: Shaoyun Liu <Shaoyun.Liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Handle dynamic offsets correctly in static arrays.
Acked-by: Christian Konig <christian.koenig@amd.com>
Signed-off-by: Shaoyun Liu <Shaoyun.Liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update the register access macros and functions to take into
account the new dynamic IP base offsets.
Acked-by: Christian Konig <christian.koenig@amd.com>
Signed-off-by: Shaoyun Liu <Shaoyun.Liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The base offsets of the IP blocks may change across
asics even though the relative register offsets
are the same for an IP. Handle this dynamically.
Acked-by: Christian Konig <christian.koenig@amd.com>
Signed-off-by: Shaoyun Liu <Shaoyun.Liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use drm_fb_cma_fbdev_init() and drm_fb_cma_fbdev_fini() which relies on
the fact that drm_device holds a pointer to the drm_fb_helper structure.
This means that the driver doesn't have to keep track of that.
Also use the drm_fb_helper functions directly.
Cc: Liviu Dudau <liviu.dudau@arm.com>
Cc: Brian Starkey <brian.starkey@arm.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171115142001.45358-20-noralf@tronnes.org
Use drm_fb_cma_fbdev_init() and drm_fb_cma_fbdev_fini() which relies on
the fact that drm_device holds a pointer to the drm_fb_helper structure.
This means that the driver doesn't have to keep track of that.
Also use the drm_fb_helper functions directly.
Cc: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20171115142001.45358-19-noralf@tronnes.org
Use drm_fb_cma_fbdev_init() and drm_fb_cma_fbdev_fini() which relies on
the fact that drm_device holds a pointer to the drm_fb_helper structure.
This means that the driver doesn't have to keep track of that.
Also use the drm_fb_helper functions directly.
Cc: Eric Anholt <eric@anholt.net>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20171115142001.45358-18-noralf@tronnes.org
Use drm_fb_cma_fbdev_init() and drm_fb_cma_fbdev_fini() which relies on
the fact that drm_device holds a pointer to the drm_fb_helper structure.
This means that the driver doesn't have to keep track of that.
Also use the drm_fb_helper functions directly.
Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20171115142001.45358-17-noralf@tronnes.org
Use drm_fb_cma_fbdev_init() and drm_fb_cma_fbdev_fini() which relies on
the fact that drm_device holds a pointer to the drm_fb_helper structure.
This means that the driver doesn't have to keep track of that.
Also use the drm_fb_helper functions directly.
Cc: Jyri Sarha <jsarha@ti.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Jyri Sarha <jsarha@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171115142001.45358-16-noralf@tronnes.org
Use drm_fb_cma_fbdev_init() and drm_fb_cma_fbdev_fini() which relies on
the fact that drm_device holds a pointer to the drm_fb_helper structure.
This means that the driver doesn't have to keep track of that.
Also use the drm_fb_helper functions directly.
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171115142001.45358-15-noralf@tronnes.org
Use drm_fb_cma_fbdev_init() and drm_fb_cma_fbdev_fini() which relies on
the fact that drm_device holds a pointer to the drm_fb_helper structure.
This means that the driver doesn't have to keep track of that.
Also use the drm_fb_helper functions directly.
Remove duplicate ldev assignment.
Cc: Yannick Fertre <yannick.fertre@st.com>
Cc: Philippe Cornu <philippe.cornu@st.com>
Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Cc: Vincent Abriou <vincent.abriou@st.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Philippe Cornu <philippe.cornu@st.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171115142001.45358-14-noralf@tronnes.org
Use drm_fb_cma_fbdev_init() and drm_fb_cma_fbdev_fini() which relies on
the fact that drm_device holds a pointer to the drm_fb_helper structure.
This means that the driver doesn't have to keep track of that.
Also use the drm_fb_helper functions directly.
Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Cc: Vincent Abriou <vincent.abriou@st.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20171115142001.45358-13-noralf@tronnes.org
Use drm_fb_cma_fbdev_init() and drm_fb_cma_fbdev_fini() which relies on
the fact that drm_device holds a pointer to the drm_fb_helper structure.
This means that the driver doesn't have to keep track of that.
Also use the drm_fb_helper functions directly.
Cc: Eric Anholt <eric@anholt.net>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20171115142001.45358-11-noralf@tronnes.org
Use drm_fb_cma_fbdev_init() and drm_fb_cma_fbdev_fini() which relies on
the fact that drm_device holds a pointer to the drm_fb_helper structure.
This means that the driver doesn't have to keep track of that.
Also use the drm_fb_helper functions directly.
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20171115142001.45358-8-noralf@tronnes.org
Use drm_fb_cma_fbdev_init() and drm_fb_cma_fbdev_fini() which relies on
the fact that drm_device holds a pointer to the drm_fb_helper structure.
This means that the driver doesn't have to keep track of that.
Also use the drm_fb_helper functions directly.
Cc: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171115142001.45358-6-noralf@tronnes.org
Add functions drm_fb_cma_fbdev_init(), drm_fb_cma_fbdev_fini() and
drm_fb_cma_fbdev_init_with_funcs(). These functions relies on the fact
that the drm_fb_helper struct is stored in dev->drm_fb_helper_private
so drivers don't need to store it.
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20171115142001.45358-3-noralf@tronnes.org
Implement primary plane update without having to go through a modeset
to achieve that; the hardware does not require such complexity. This
means we treat the primary plane as any other, allowing the format,
size, position and scaling to be updated via the normal plane ioctls.
This also allows us to seemlessly disable and re-enable the primary
plane when (eg) displaying full-frame video without any graphic
clipping the overlaid video - which saves wasting memory bandwidth
needlessly verifying that the colorkey is indeed filling the entire
primary plane.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
We must wait for the previous plane work to complete before moving
the overlay window, as it could overwrite our positioning update.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Move the overlay plane register update generation to a separate function
as this is independent of the legacy or atomic update.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Re-organise overlay register generation so that we do not have to wait
for the previous update to complete while creating the new state. This
allows the update to be fully prepared before queueing it for the next
interrupt.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Disable planes at the next blanking period rather than immediately.
In order to achieve this, we need to delay the clearing of dcrtc->plane
until after the next blanking period, so move that into a separate
work function. To avoid races, we also need to move its assignment in
the overlay code.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Avoid printing an error message when armada_drm_plane_work_queue() is
unable to get the vblank (eg, because we're doing a modeset.) Continue
to report the failure to the caller, so the caller can handle this.
Move the error message into armada_ovl_plane_update().
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Use drm_plane_helper_check_state() to check the overlay plane state
rather than drm_plane_helper_check_update(), as:
(1) using drm_plane_helper_check_state() provides a better migration
path to atomic modeset
(2) it avoids needless copies of drm rectangle structures, and so is
more efficient.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Only enable the HSMOOTH control bit if we are scaling horizontally,
otherwise it makes no sense to enable the horizontal scaler.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Move writes of LCD_SPU_SRAM_PARA1 under the irq lock, so that we can
add this to the frame updates at interrupt time when disabling a
plane.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Move the register update structure out of the overlay private structure
into armada_plane_work, as this is common to both the primary and
overlay planes.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Move the sending of events into the armada_plane_work structure, and
combine the processing in armada_drm_plane_work_call().
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Both the primary and overlay planes retire framebuffers in a similar
manner; this can be consolidated by moving the retirement up to the
armada_plane_work layer.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Move the overlay plane work out from under the spinlock so that both the
primary and overlay planes run their work in the same context. This is
necessary so that we can use frame works with the overlay plane.
However, we must update the CRTC registers under the spinlock, so fix up
the overlay code for that.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Clear the plane enable bit in the software state within
armada_drm_plane_disable() when disabling either the primary or
overlay planes.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Merge armada_drm_primary_disable() into armada_drm_crtc_plane_disable()
and rename to armada_drm_plane_disable(). Use this to simplify
armada_ovl_plane_disable().
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Wait for a second, and if we time out, cancel any pending work when
disabling the primary plane. This ensures that any pending work is
completed or cleaned up prior to the disable taking effect.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Add a work cancel callback, so that work items can add functionality to
clean themselves up when they are cancelled.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Store the plane in the armada_plane_work structure rather than passing
it around; it doesn't get used very much in the work structures, so
passing it around is a needless expense.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
armada_drm_plane_work_cancel()'s returned work structure is never used
or referenced, so it's pointless returning it. It's also pointless
because the caller doesn't have a clue what kind of work structure it
is.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
We weren't correctly calculating the YUV planar offsets for subsampled
chroma planes correctly - fix up the coordinates for planes 1 and 2.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Lookup the drm_format_info structure once when computing all the
framebuffer plane addresses by using drm_format_info(), rather than
repetitive lookups via drm_format_plane_cpp().
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
The UV swap code was not always programming things correctly when
the source origin box has been offset. Fix this.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Avoid powering down the overlay SRAM banks when disabling the primary
plane, thereby masking any overlay video. This feature is supposed to
allow us to cut the bandwidth required while displaying full-frame
overlay video.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
This driver can use drm_fb_helper_lastclose() as its .lastclose callback.
It can also use drm_fb_helper_output_poll_changed() as its
.output_poll_changed callback.
Cc: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20171205182504.41923-12-noralf@tronnes.org
This driver can use drm_fb_helper_lastclose() as its .lastclose callback.
It can also use drm_fb_helper_output_poll_changed() as its
.output_poll_changed callback.
Cc: Mark Yao <mark.yao@rock-chips.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20171205182504.41923-11-noralf@tronnes.org
This driver can use drm_fb_helper_lastclose() as its .lastclose callback.
It can also use drm_fb_helper_output_poll_changed() as its
.output_poll_changed callback.
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20171205182504.41923-9-noralf@tronnes.org
This driver can use drm_fb_helper_lastclose() as its .lastclose callback.
It can also use drm_fb_helper_output_poll_changed() as its
.output_poll_changed callback.
Cc: Rob Clark <robdclark@gmail.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20171205182504.41923-7-noralf@tronnes.org
This driver can use drm_fb_helper_lastclose() as its .lastclose callback.
It can also use drm_fb_helper_output_poll_changed() as its
.output_poll_changed callback.
Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20171205182504.41923-6-noralf@tronnes.org
This driver can use drm_fb_helper_lastclose() as its .lastclose callback.
It can also use drm_fb_helper_output_poll_changed() as its
.output_poll_changed callback.
Cc: Inki Dae <inki.dae@samsung.com>
Cc: Joonyoung Shim <jy0922.shim@samsung.com>
Cc: Seung-Woo Kim <sw0312.kim@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Inki Dae <inki.dae@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171205182504.41923-5-noralf@tronnes.org
This driver can use drm_fb_helper_lastclose() as its .lastclose callback.
It can also use drm_fb_helper_output_poll_changed() as its
.output_poll_changed callback.
Cc: Russell King <linux@armlinux.org.uk>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Russell King <rmk+kernel@armlinux.org.uk>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20171205182504.41923-4-noralf@tronnes.org
When intel_modeset_setup_plane_state() fails drop the local framebuffer
reference before jumping to the error, otherwise we leak the framebuffer.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Fixes: edde361711 ("drm/i915: Use atomic state to obtain load detection crtc, v3.")
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171207220025.22698-1-chris@chris-wilson.co.uk
Even fbc isn't using this stuff anymore, so time to remove it.
Cleaning up one small piece of the atomic conversion cruft at the time
...
Quick explanation on why the plane->fb assignment is ok to delete: The
core code takes care of the refcounting and legacy ->fb pointer
updating, but drivers are allowed to update it ahead of time. Most
legacy modeset drivers did that as part of their set_config callback
(since that's how the legacy/crtc helpers worked). In i915 we only
need that to make the fbc code happy.
v2: don't nuke the assignement of intel_crtc->config, I accidentally
set CI ablaze :-) Spotted by Maarten. And better explain why nuking
the ->fb assignement shouldn't set off alarm bells.
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171207143202.6021-1-daniel.vetter@ffwll.ch
It seems that the DMC likes to transition between the DC states a lot when
there are no connected displays (no active power domains) during command
submission.
This activity on DC states has a negative impact on the performance of the
chip with huge latencies observed in the interrupt handlers and elsewhere.
Simple tests like igt/gem_latency -n 0 are slowed down by a factor of
eight.
Work around it by introducing a new power domain named,
POWER_DOMAIN_GT_IRQ, associtated with the "DC off" power well, which is
held for the duration of command submission activity.
CNL has the same problem which will be addressed as a follow-up. Doing
that requires a fix for a DC6 context corruption problem in the CNL DMC
firmware which is yet to be released.
v2:
* Add commit text as comment in i915_gem_mark_busy. (Chris Wilson)
* Protect macro body with braces. (Jani Nikula)
v3:
* Add dedicated power domain for clarity. (Chris, Imre)
* Commit message and comment text updates.
* Apply to all big-core GEN9 parts apart for Skylake which is pending DMC
firmware release.
v4:
* Power domain should be inner to device runtime pm. (Chris)
* Simplify NEEDS_CSR_GT_PERF_WA macro. (Chris)
* Handle async DMC loading by moving the GT_IRQ power domain logic into
intel_runtime_pm. (Daniel, Chris)
* Include small core GEN9 as well. (Imre)
v5
* Special handling for async DMC load is not needed since on failure the
power domain reference is kept permanently taken. (Imre)
v6:
* Drop the NEEDS_CSR_GT_PERF_WA macro since all firmwares have now been
deployed. (Imre, Chris)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=100572
Testcase: igt/gem_exec_nop/headless
Cc: Imre Deak <imre.deak@intel.com>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk> (v2)
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Dmitry Rogozhkin <dmitry.v.rogozhkin@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> (v5)
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
[Imre: Add note about applying the WA on CNL as a follow-up]
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171205132854.26380-1-tvrtko.ursulin@linux.intel.com
On reference boards and derivatives, the HDMI Logic is powered by an external
5V regulator.
This regulator was set by the Vendor U-Boot, add optional support for it.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Tested-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1512561268-29806-4-git-send-email-narmstrong@baylibre.com
In the process of dmabuf_obj cleanup, the dmabuf_obj might be freed during
dmabuf_obj_put leaking intel_gvt_hypervisor_put_vfio_device.
Move intel_gvt_hypervisor_put_vfio_device and all the other dmabuf_obj ops
in front of dmabuf_obj_put and let every dmabuf_obj have a chance to call
intel_gvt_hypervisor_put_vfio_device to fix this leaking issue.
Fixes: e3a0d7976c53 ("drm/i915/gvt: Handle orphan dmabuf_objs")
Signed-off-by: Tina Zhang <tina.zhang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Both ROM/VGA region are not supported for vGPU in GVT. But if the device
model want to get those region, we should return the correct information
but not leave the structure with random data. Change to same operation
of BAR3-BAR5 which are also not supported by vGPU.
Refer to function @intel_vgpu_rw.
Signed-off-by: Pei Zhang <pei.zhang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Rename the files to reflect their real role - to switch the mmio context of
each vGPU engine.
v2: update Makefile.
Signed-off-by: Changbin Du <changbin.du@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
After engine mmio switched, software still need write workload
submission registers. So we can remove the MMIO barriar in MMIO
switch.
Signed-off-by: Changbin Du <changbin.du@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Select appropriate mmio list at initialization time, so we don't need to
do duplicated work at where requires the mmio list.
V2:
- Add a termination mark of mmio list.
Signed-off-by: Changbin Du <changbin.du@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
To improve the readability, let's remove the hard code for each mmio
definition. The raw offset remained as a comment, which give us an
offset based view.
This refine is to make it convenient for new platform enabling.
Signed-off-by: Changbin Du <changbin.du@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
QXL associates mouse state with its primary plane.
Destroying a primary plane and putting a new one in place has the side
effect of destroying the cursor as well.
This commit changes the driver to reapply the cursor any time a new
primary is created. It achieves this by keeping a reference to the
cursor bo on the qxl_crtc struct.
This fix is very similar to
commit 4532b241a4 ("drm/qxl: reapply cursor after SetCrtc calls")
which got implicitly reverted as part of implementing the atomic
modeset feature.
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Dave Airlie <airlied@redhat.com>
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1512097
Fixes: 1277eed5fe ("drm: qxl: Atomic phase 1: convert cursor to universal plane")
Cc: stable@vger.kernel.org
Signed-off-by: Ray Strode <rstrode@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
qxl_cursor_atomic_update allocs a bo for the cursor that
it never frees up at the end of the function.
This commit fixes that.
Signed-off-by: Ray Strode <rstrode@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
Currently on every submission, we recalculate the ELSP register offset
for the engine, after chasing the pointers to find the iomem base. Since
this is fixed for the lifetime of the driver, record the offset in the
execlists struct.
In practice the difference is negligible, it just happens to remove 27
bytes of eyesore pointer dancing from next to the hottest instruction
(which is itself due to stalling for a cache miss) in perf profiles of
the execlists_submission_tasklet().
v2: Trim off one more elsp local.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Michel Thierry <michel.thierry@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171207222434.17686-1-chris@chris-wilson.co.uk
In quite a few places, we have a list iteration over the vma on an
object that only want to inspect GGTT vma. By construction, these are
placed at the start of the list, so we have copied that knowledge into
many callsites. Pull that knowledge back to i915_vma.h and provide a
for_each_ggtt_vma() to tidy up the code.
v2: Add a backreference from vma_create() to remind ourselves why we put
ggtt vma at the head of the obj->vma_list (and ppgtt vma at the tail).
v3: Fixup s/vma/V/
Suggested-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20171207211407.31549-1-chris@chris-wilson.co.uk
- Init clock gate fix (Ville)
- Execlists event handling corrections (Chris, Michel)
- Improvements on GPU Cache invalidation and context switch (Chris)
- More perf OA changes (Lionel)
- More selftests improvements and fixes (Chris, Matthew)
- Clean-up on modules parameters (Chris)
- Clean-up around old ringbuffer submission and hw semaphore on old platforms (Chris)
- More Cannonlake stabilization effort (David, James)
- Display planes clean-up and improvements (Ville)
- New PMU interface for perf queries... (Tvrtko)
- ... and other subsequent PMU changes and fixes (Tvrtko, Chris)
- Remove success dmesg noise from rotation (Chris)
- New DMC for Kabylake (Anusha)
- Fixes around atomic commits (Daniel)
- GuC updates and fixes (Sagar, Michal, Chris)
- Couple gmbus/i2c fixes (Ville)
- Use exponential backoff for all our wait_for() (Chris)
- Fixes for i915/fbdev (Chris)
- Backlight fixes (Arnd)
- Updates on shrinker (Chris)
- Make Hotplug enable more robuts (Chris)
- Disable huge pages (TPH) on lack of a needed workaround (Joonas)
- New GuC images for SKL, KBL, BXT (Sagar)
- Add HW Workaround for Geminilake performance (Valtteri)
- Fixes for PPS timings (Imre)
- More IPS fixes (Maarten)
- Many fixes for Display Port on gen2-gen4 (Ville)
- Retry GPU reset making the recover from hang more robust (Chris)
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJaIf0wAAoJEPpiX2QO6xPK/wAH/0JrYX+oml+ZJ7xV4wxm0S5S
K8jcSWQPlF78xkuiVaA0200qOPJP4Yp32Gmv7dVBFKq7IaLn3c8B2DjqE3D0QPue
ZPSMMFz7NTMVjfKpmkCp9V3ln87Cc/Cj0L66CKRuFnvefDCGLN4hULj3NAxQfkwm
9CsUH+p5d7usXgIB7tIovNEKw4hLiTQiTUd5bwok6iJ3EB79DHxxlY8nG6n5ukEr
9XryS1ADGmTUy7YifIdJKPyDLjEeP+xRMApUva67y7zaTk7iW6mETkBJ7WpQbCCL
fQaLlmU/SrBD8ViJBx19U6ofKIVJ+vVMoU9JNg4Ak5WZOfjw7aIPiZaaHU3Aj+w=
=IutN
-----END PGP SIGNATURE-----
Merge tag 'drm-intel-next-2017-12-01' of git://anongit.freedesktop.org/drm/drm-intel into drm-next
[airlied: fix conflict in intel_dsi.c]
drm-intel-next-2017-12-01:
- Init clock gate fix (Ville)
- Execlists event handling corrections (Chris, Michel)
- Improvements on GPU Cache invalidation and context switch (Chris)
- More perf OA changes (Lionel)
- More selftests improvements and fixes (Chris, Matthew)
- Clean-up on modules parameters (Chris)
- Clean-up around old ringbuffer submission and hw semaphore on old platforms (Chris)
- More Cannonlake stabilization effort (David, James)
- Display planes clean-up and improvements (Ville)
- New PMU interface for perf queries... (Tvrtko)
- ... and other subsequent PMU changes and fixes (Tvrtko, Chris)
- Remove success dmesg noise from rotation (Chris)
- New DMC for Kabylake (Anusha)
- Fixes around atomic commits (Daniel)
- GuC updates and fixes (Sagar, Michal, Chris)
- Couple gmbus/i2c fixes (Ville)
- Use exponential backoff for all our wait_for() (Chris)
- Fixes for i915/fbdev (Chris)
- Backlight fixes (Arnd)
- Updates on shrinker (Chris)
- Make Hotplug enable more robuts (Chris)
- Disable huge pages (TPH) on lack of a needed workaround (Joonas)
- New GuC images for SKL, KBL, BXT (Sagar)
- Add HW Workaround for Geminilake performance (Valtteri)
- Fixes for PPS timings (Imre)
- More IPS fixes (Maarten)
- Many fixes for Display Port on gen2-gen4 (Ville)
- Retry GPU reset making the recover from hang more robust (Chris)
* tag 'drm-intel-next-2017-12-01' of git://anongit.freedesktop.org/drm/drm-intel: (101 commits)
drm/i915: Update DRIVER_DATE to 20171201
drm/i915/cnl: Mask previous DDI - PLL mapping
drm/i915: Remove unsafe i915.enable_rc6
drm/i915: Sleep and retry a GPU reset if at first we don't succeed
drm/i915: Interlaced DP output doesn't work on VLV/CHV
drm/i915: Pass crtc state to intel_pipe_{enable,disable}()
drm/i915: Wait for pipe to start on i830 as well
drm/i915: Fix vblank timestamp/frame counter jumps on gen2
drm/i915: Fix deadlock in i830_disable_pipe()
drm/i915: Fix has_audio readout for DDI A
drm/i915: Don't add the "force audio" property to DP connectors that don't support audio
drm/i915: Disable DP audio for g4x
drm/i915/selftests: Wake the device before executing requests on the GPU
drm/i915: Set fake_vma.size as well as fake_vma.node.size for capture
drm/i915: Tidy up signed/unsigned comparison
drm/i915: Enable IPS with only sprite plane visible too, v4.
drm/i915: Make ips_enabled a property depending on whether IPS is enabled, v3.
drm/i915: Avoid PPS HW/SW state mismatch due to rounding
drm/i915: Skip switch-to-kernel-context on suspend when wedged
drm/i915/glk: Apply WaProgramL3SqcReg1DefaultForPerf for GLK too
...
regression fix for vc4 + rpm stable fix for analogix bridge
* tag 'drm-misc-fixes-2017-12-07' of git://anongit.freedesktop.org/drm/drm-misc:
drm/bridge: analogix dp: Fix runtime PM state in get_modes() callback
drm/vc4: Fix false positive WARN() backtrace on refcount_inc() usage
- Fix for fd.o bug #103997 CNL eDP + HDMI causing a machine hard hang (James)
- Fix to allow suspending with a wedged GPU to hopefully unwedge it (Chris)
- Fix for Gen2 vblank timestap/frame counter jumps (Ville)
- Revert of a W/A for enabling FBC on CNL/GLK for certain images
and sizes (Rodrigo)
- Lockdep fix for i915 userptr code (Chris)
gvt-fixes-2017-12-06
- Fix invalid hw reg read value for vGPU (Xiong)
- Fix qemu warning on PCI ROM bar missing (Changbin)
- Workaround preemption regression (Zhenyu)
* tag 'drm-intel-fixes-2017-12-07' of git://anongit.freedesktop.org/drm/drm-intel:
Revert "drm/i915: Display WA #1133 WaFbcSkipSegments:cnl, glk"
drm/i915: Call i915_gem_init_userptr() before taking struct_mutex
drm/i915/gvt: set max priority for gvt context
drm/i915/gvt: Don't mark vgpu context as inactive when preempted
drm/i915/gvt: Limit read hw reg to active vgpu
drm/i915/gvt: Export intel_gvt_render_mmio_to_ring_id()
drm/i915/gvt: Emulate PCI expansion ROM base address register
drm/i915/cnl: Mask previous DDI - PLL mapping
drm/i915: Fix vblank timestamp/frame counter jumps on gen2
drm/i915: Skip switch-to-kernel-context on suspend when wedged
- Add "panel orientation" property to DRM to indicate orientation of the
panel vs the device's casing (Hans de Goede)
Core Changes:
- misc doc and bug fixes
Driver Changes:
- sun4i: Many improvements to the DE driver like multi-plane support and
YUV formats (Jernej Skrabec)
-----BEGIN PGP SIGNATURE-----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=/Aku
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2017-12-07' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
UAPI Changes:
- Add "panel orientation" property to DRM to indicate orientation of the
panel vs the device's casing (Hans de Goede)
Core Changes:
- misc doc and bug fixes
Driver Changes:
- sun4i: Many improvements to the DE driver like multi-plane support and
YUV formats (Jernej Skrabec)
* tag 'drm-misc-next-2017-12-07' of git://anongit.freedesktop.org/drm/drm-misc: (50 commits)
drm/sun4i: Fix uninitialized variables in vi layer
drm/fb-helper: Fix potential NULL pointer dereference
gpu: drm: stm: Adopt SPDX identifiers
gpu: drm: sti: Adopt SPDX identifiers
drm/fsl-dcu: Use drm_mode_config_helper_suspend/resume()
drm/sun4i: Wire in DE2 YUV support
drm/sun4i: Expand DE2 scaler lib with YUV support
drm/sun4i: Add DE2 definitions for YUV formats
drm/sun4i: Add DE2 CSC library
drm/sun4i: Add CCSC property to DE2 configuration
drm/sun4i: Add support for HW scaling to DE2
drm/sun4i: Add scaler configuration to DE2 mixers
drm/sun4i: Add support for DE2 VI planes
drm/sun4i: Reorganize UI layer code in DE2
drm/sun4i: Add support for all HW supported DE2 RGB formats
drm/sun4i: Add multi plane support to DE2 driver
drm/sun4i: Move interlace related code in DE2
drm/sun4i: Move channel size related code in DE2
drm/sun4i: Move line width setting in DE2
drm/sun4i: Use values calculated by atomic check
...
Was missing before.
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This is the only part of the scheduler which must not be called from
different drivers. Move it to module init/exit so it is done a single
time when loading the scheduler.
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Tested-by: Dieter Nützel <Dieter@nuetzel-hh.de>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This moves and renames the AMDGPU scheduler to a common location in DRM
in order to facilitate re-use by other drivers. This is mostly a straight
forward rename with no code changes.
One notable exception is the function to_drm_sched_fence(), which is no
longer a inline header function to avoid the need to export the
drm_sched_fence_ops_scheduled and drm_sched_fence_ops_finished structures.
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Tested-by: Dieter Nützel <Dieter@nuetzel-hh.de>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
These files were missing it before.
Acked-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Was missing license text.
Acked-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
get_modes() callback might be called asynchronously from the DRM core and
it is not synchronized with bridge_enable(), which sets proper runtime PM
state of the main DP device. Fix this by calling pm_runtime_get_sync()
before calling drm_get_edid(), which in turn calls drm_dp_i2c_xfer() and
analogix_dp_transfer() to ensure that main DP device is runtime active
when doing any access to its registers.
This fixes the following kernel issue on Samsung Exynos5250 Snow board:
Unhandled fault: imprecise external abort (0x406) at 0x00000000
pgd = c0004000
[00000000] *pgd=00000000
Internal error: : 406 [#1] PREEMPT SMP ARM
Modules linked in:
CPU: 0 PID: 62 Comm: kworker/0:2 Not tainted 4.13.0-rc2-00364-g4a97a3da420b #3357
Hardware name: SAMSUNG EXYNOS (Flattened Device Tree)
Workqueue: events output_poll_execute
task: edc14800 task.stack: edcb2000
PC is at analogix_dp_transfer+0x15c/0x2fc
LR is at analogix_dp_transfer+0x134/0x2fc
pc : [<c0468538>] lr : [<c0468510>] psr: 60000013
sp : edcb3be8 ip : 0000002a fp : 00000001
r10: 00000000 r9 : edcb3cd8 r8 : edcb3c40
r7 : 00000000 r6 : edd3b380 r5 : edd3b010 r4 : 00000064
r3 : 00000000 r2 : f0ad3000 r1 : edcb3c40 r0 : edd3b010
Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none
Control: 10c5387d Table: 4000406a DAC: 00000051
Process kworker/0:2 (pid: 62, stack limit = 0xedcb2210)
Stack: (0xedcb3be8 to 0xedcb4000)
[<c0468538>] (analogix_dp_transfer) from [<c0424ba4>] (drm_dp_i2c_do_msg+0x8c/0x2b4)
[<c0424ba4>] (drm_dp_i2c_do_msg) from [<c0424e64>] (drm_dp_i2c_xfer+0x98/0x214)
[<c0424e64>] (drm_dp_i2c_xfer) from [<c057b2d8>] (__i2c_transfer+0x140/0x29c)
[<c057b2d8>] (__i2c_transfer) from [<c057b4a4>] (i2c_transfer+0x70/0xe4)
[<c057b4a4>] (i2c_transfer) from [<c0441de4>] (drm_do_probe_ddc_edid+0xb4/0x114)
[<c0441de4>] (drm_do_probe_ddc_edid) from [<c0441e5c>] (drm_probe_ddc+0x18/0x28)
[<c0441e5c>] (drm_probe_ddc) from [<c0445728>] (drm_get_edid+0x124/0x2d4)
[<c0445728>] (drm_get_edid) from [<c0465ea0>] (analogix_dp_get_modes+0x90/0x114)
[<c0465ea0>] (analogix_dp_get_modes) from [<c0425e8c>] (drm_helper_probe_single_connector_modes+0x198/0x68c)
[<c0425e8c>] (drm_helper_probe_single_connector_modes) from [<c04325d4>] (drm_setup_crtcs+0x1b4/0xd18)
[<c04325d4>] (drm_setup_crtcs) from [<c04344a8>] (drm_fb_helper_hotplug_event+0x94/0xd0)
[<c04344a8>] (drm_fb_helper_hotplug_event) from [<c0425a50>] (drm_kms_helper_hotplug_event+0x24/0x28)
[<c0425a50>] (drm_kms_helper_hotplug_event) from [<c04263ec>] (output_poll_execute+0x6c/0x174)
[<c04263ec>] (output_poll_execute) from [<c0136f18>] (process_one_work+0x188/0x3fc)
[<c0136f18>] (process_one_work) from [<c01371f4>] (worker_thread+0x30/0x4b8)
[<c01371f4>] (worker_thread) from [<c013daf8>] (kthread+0x128/0x164)
[<c013daf8>] (kthread) from [<c0108510>] (ret_from_fork+0x14/0x24)
Code: 0a000002 ea000009 e2544001 0a00004a (e59537c8)
---[ end trace cddc7919c79f7878 ]---
Reported-by: Misha Komarovskiy <zombah@gmail.com>
CC: stable@vger.kernel.org # v4.10+
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20171121074936.22520-1-m.szyprowski@samsung.com
As writes through the GTT and GGTT PTE updates do not share the same
path, they are not strictly ordered and so we must explicitly flush the
indirect writes prior to modifying the PTE. We do track outstanding GGTT
writes on the object itself, but since the object may have multiple GGTT
vma, that is overly coarse as we can track and flush individual vma as
required.
Whilst here, update the GGTT flushing behaviour for Cannonlake.
v2: Hard-code ring offset to allow use during unload (after RCS may have
been freed, or never existed!)
References: https://bugs.freedesktop.org/show_bug.cgi?id=104002
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171206124914.19960-2-chris@chris-wilson.co.uk
Originally we translated from the object to the vma by walking
obj->vma_list to find the matching vm (for user lookups). Now we process
user lookups using the rbtree, and we only use obj->vma_list itself for
maintaining state (e.g. ensuring that all vma are flushed or rebound).
As such maintenance needs to go on beyond the user's awareness of the
vma, defer removal of the vma from the obj->vma_list from i915_vma_close()
to i915_vma_destroy()
Fixes: 5888fc9eac ("drm/i915: Flush pending GTT writes before unbinding")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=104155
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171206124914.19960-1-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
This reverts commit 8f067837c4.
HSD says "WA withdrawn. It was causing corruption with some images.
WA is not strictly necessary since this bug just causes loss of FBC
compression with some sizes and images, but doesn't break anything."
Fixes: 8f067837c4 ("drm/i915: Display WA #1133 WaFbcSkipSegments:cnl, glk")
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171117010825.23118-1-radhakrishna.sripada@intel.com
(cherry picked from commit 0cfecb7c4b)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
With CONFIG_REFCOUNT_FULL enabled, refcount_inc() complains when it's
passed a refcount object that has its counter set to 0. In this driver,
this is a valid use case since we want to increment ->usecnt only when
the BO object starts to be used by real HW components and this is
definitely not the case when the BO is created.
Fix the problem by using refcount_inc_not_zero() instead of
refcount_inc() and fallback to refcount_set(1) when
refcount_inc_not_zero() returns false. Note that this 2-steps operation
is not racy here because the whole section is protected by a mutex
which guarantees that the counter does not change between the
refcount_inc_not_zero() and refcount_set() calls.
Fixes: b9f19259b8 ("drm/vc4: Add the DRM_IOCTL_VC4_GEM_MADVISE ioctl")
Reported-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20171122203928.28135-1-boris.brezillon@free-electrons.com
Removed exynos_drm_get_dma_device funtion declaration on top
of exynos_drm_drv.c file.
We can remove this declaration by moving the implementation
of this function upwards.
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Removed two descriptions to 'da_start' and 'da_space_size'
from exynos_drm_private structure.
These members don't exist anymore.
Signed-off-by: Inki Dae <inki.dae@samsung.com>
When no IOMMU is available, all GEM buffers allocated by Exynos DRM driver
are contiguous, because of the underlying dma_alloc_attrs() function
provides only such buffers. In such case it makes no sense to keep
BO_NONCONTIG flag for the allocated GEM buffers. This allows to avoid
failures for buffer contiguity checks in the subsequent operations on GEM
objects.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
CC: stable@vger.kernel.org # v4.4+
When IOMMU support was enabled, dma-buf import in Exynos DRM was broken
since commit f43c35966a ("drm/exynos: use real device for DMA-mapping
operations") due to using wrong struct device in drm_gem_prime_import()
function. This patch fixes following kernel BUG caused by incorrect buffer
mapping to DMA address space:
exynos-sysmmu 14650000.sysmmu: 14450000.mixer: PAGE FAULT occurred at 0xb2e00000
------------[ cut here ]------------
kernel BUG at drivers/iommu/exynos-iommu.c:449!
Internal error: Oops - BUG: 0 [#1] PREEMPT SMP ARM
Modules linked in:
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.14.0-rc4-next-20171016-00033-g990d723669fd #3165
Hardware name: SAMSUNG EXYNOS (Flattened Device Tree)
task: c0e0b7c0 task.stack: c0e00000
PC is at exynos_sysmmu_irq+0x1d0/0x24c
LR is at exynos_sysmmu_irq+0x154/0x24c
------------[ cut here ]------------
Reported-by: Marian Mihailescu <mihailescu2m@gmail.com>
Fixes: f43c35966a ("drm/exynos: use real device for DMA-mapping operations")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Just the connector_iter corner-case regression fix.
* tag 'drm-misc-fixes-2017-12-06' of git://anongit.freedesktop.org/drm/drm-misc:
drm: safely free connectors from connector_iter
fb_helper is being dereferenced before it is null checked,
hence there is a potential null pointer dereference.
Fix this by moving the pointer dereference after fb_helper
has been null checked.
This issue was detected with the help of Coccinelle.
Fixes: c777990fb4 ("drm/fb-helper: Handle function NULL argument")
Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20171205174628.GA31189@embeddedor.com
First feature request for 4.16. Highlights:
- RV and Vega header cleanups
- TTM operation context support
- 48 bit GPUVM fixes for Vega/RV
- More smatch fixes
- ECC support for vega10
- Resizeable BAR support
- Multi-display sync support in DC
- SR-IOV fixes
- Various scheduler improvements
- GPU reset fixes and vram lost tracking
- Clean up DC/powerplay interfaces
- DCN display fixes
- Various DC fixes
* 'drm-next-4.16' of git://people.freedesktop.org/~agd5f/linux: (291 commits)
drm/radeon: Use drm_fb_helper_lastclose() and _poll_changed()
drm/amdgpu: Use drm_fb_helper_lastclose() and _poll_changed()
drm/amd/display: Use drm_fb_helper_poll_changed()
drm/ttm: swap consecutive allocated pooled pages v4
drm/amdgpu: fix amdgpu_sync_resv v2
drm/ttm: swap consecutive allocated cached pages v3
drm/amd/amdgpu: set gtt size according to system memory size only
drm/amdgpu: Get rid of dep_sync as a seperate object.
drm/amdgpu: allow specifying vm_block_size for multi level PDs v2
drm/amdgpu: move validation of the VM size into the VM code
drm/amdgpu: allow non pot VM size values
drm/amdgpu: choose number of VM levels based on VM size
drm/amdgpu: unify VM size handling of Vega10 with older generation
drm/amdgpu: fix amdgpu_vm_num_entries
drm/amdgpu: fix VM PD addr shift
drm/amdgpu: correct vce4.0 fw config for SRIOV (V2)
drm/amd/display: Don't call dm_log_to_buffer directly in dc_conn_log
drm/amd/display: Add dm_logger_append_va API
drm/ttm: Use a static string instead of an array of char *
drm/amd/display: remove usage of legacy_cursor_update
...
This driver can use drm_fb_helper_lastclose() in its .lastclose function.
It can also use drm_fb_helper_output_poll_changed() as its
.output_poll_changed callback.
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This driver can use drm_fb_helper_lastclose() in its .lastclose function.
It can also use drm_fb_helper_output_poll_changed() as its
.output_poll_changed callback.
Remove the unused driver implementations.
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This driver can use drm_fb_helper_output_poll_changed() as its
.output_poll_changed callback.
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When we detect consecutive allocation of pages swap them to avoid
accidentally freeing them as huge page.
v2: use swap
v3: check if it's really the first allocated page
v4: don't touch the loop variable
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Roger He <Hongbo.He@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Tested-by: Dieter Nützel <Dieter@nuetzel-hh.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes a bug introduced by AMDGPU_GEM_CREATE_EXPLICIT_SYNC. We still need
to wait for pipelined moves in the shared fences list.
v2: fix typo
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Andres Rodriguez <andresx7@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When we detect consecutive allocation of pages swap them to avoid
accidentally freeing them as huge page.
v2: use swap
v3: check if it's really the first allocated page
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Roger He <Hongbo.He@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Roger He <Hongbo.He@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Instead mark fence as explicit in it's amdgpu_sync_entry.
v2:
Fix use after free bug and add new parameter description.
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch allows specifying the vm_block_size even when multi level
page directories are active.
v2: fix signed/unsigned compare warning
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This moves validation of the VM size parameter into amdgpu_vm_adjust_size().
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The VM size actually doesn't need to be a power of two.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This allows us limiting the VM size for testing even of Vega10.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
One function to rule them all.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The block size only affects the leave nodes, everything else is fixed.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The block size only affects the leave nodes, everything else is fixed.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
1. program vce 4.0 fw with 48 bit address
2. correct vce 4.0 fw stack and date offset
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Frank Min <Frank.Min@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
dm_log_to_buffer logs unconditionally, so calling it directly resulted
in the main message being logged even when the event type isn't enabled
in the event mask.
To fix this, use the new dm_logger_append_va API.
Fixes spurious messages like
[drm] {1920x1200, 2080x1235@154000Khz}
in dmesg when a mode is set.
v2:
* Use new dm_logger_append_va API, fixes incorrect va_list usage in v1
* Just use and decrease entry.buf_offset to get rid of the trailing
newline
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Same as dm_logger_append, except it takes a va_list instead of a
variable number of arguments. dm_logger_append is now a minimal wrapper
around dm_logger_append_va.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Make the object a bit smaller by using a simple string instead
of a format string and array of char *.
$ size drivers/gpu/drm/ttm/ttm_page_alloc_dma.o*
text data bss dec hex filename
8820 216 4136 13172 3374 drivers/gpu/drm/ttm/ttm_page_alloc_dma.o.defconfig.new
8910 216 4136 13262 33ce drivers/gpu/drm/ttm/ttm_page_alloc_dma.o.defconfig.old
25383 5044 4384 34811 87fb drivers/gpu/drm/ttm/ttm_page_alloc_dma.o.allyesconfig.new
25797 5428 4384 35609 8b19 drivers/gpu/drm/ttm/ttm_page_alloc_dma.o.allyesconfig.old
Miscellanea:
o The h array had more entries than were emitted, all are now removed
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Currently the atomic check code uses legacy_cursor_update
to differnetiate if the cursor plane is being requested by
the user, which is not required as we shall be updating
plane only if modeset is requested/required.
Have tested cursor plane and underlay get updated seamlessly,
without any lag or frame drops.
Signed-off-by: Shirish S <shirish.s@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove asic_reg/vega10 folder.
Signed-off-by: Feifei Xu <Feifei.Xu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cleanup asic_reg/vega10/NBIF folder.
Signed-off-by: Feifei Xu <Feifei.Xu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cleanup asic_reg/vega10/NBIO folder.
Signed-off-by: Feifei Xu <Feifei.Xu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cleanup asic_reg/vega10/VCE folder.
Signed-off-by: Feifei Xu <Feifei.Xu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove asic/vega10/UMC folder.
Signed-off-by: Feifei Xu <Feifei.Xu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cleanup asic_reg/vega10/THM folder.
Signed-off-by: Feifei Xu <Feifei.Xu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To remove include/asic_reg/vega10 folder,create IP folders sdma0/1.
This patch cleanup asic_reg/vega10/SDMA folders.
Signed-off-by: Feifei Xu <Feifei.Xu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
found RING0 test fail after S3 resume regression, which is
introduced by 1cfd8e237f0318e330190ac21d63c58ae6a1f66c
Because after suspend VRAM will be cleared, so driver must
unpin the GART table(resident in VRAM) during suspend so it
can be evicted to system ram and must correspondingly pin it
during resume so the GART table could be restored to VRAM.
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
e.g. shrink reqeust is less than 512, the logic will skip huge pool
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Roger He <Hongbo.He@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Roger He <Hongbo.He@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Roger He <Hongbo.He@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Tony Cheng <tony.cheng@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On S3 resume, we do not reconstruct OPP, but we do need to
reinitialize some of its values to the default ones.
Therefore, move those lines out of the OPP constructor and
into init_hw.
Also reset the hubp power gated flag, since nothing is
power gated at init_hw.
Signed-off-by: Andrew Jiang <Andrew.Jiang@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Tony Cheng <tony.cheng@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove some globals that should really be per block state.
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For scaling and position change, it isn't necessary to program
watermark and check P-State as well.
Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Tony Cheng <tony.cheng@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Doing bandwidth validation implies that this is a full update. Set the
flag inside the function in case whatever is calling
dcn_validate_bandwidth doesn't set it.
Signed-off-by: Andrew Jiang <Andrew.Jiang@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The sequence of front-end > back-end > front-end programming will
program the front-end more than once. Add a mode_changed flag, and use
it to determine whether the front-end should be programmed before, or
after back-end.
Signed-off-by: Leo (Sunpeng) Li <sunpeng.li@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
With the optimized DCN10 frontend programming code, things are
programmed only when requested. For now, trigger a full update on all
plane changes.
Signed-off-by: Leo (Sunpeng) Li <sunpeng.li@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There was an error in translation of mode support check.
"N/A" is a failure condition while "" was a special case.
This change will differentiate between the two by using a
define.
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Yue Hin Lau <Yuehin.Lau@amd.com>
Reviewed-by: Eric Bernstein <Eric.Bernstein@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Tony Cheng <tony.cheng@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Yue Hin Lau <Yuehin.Lau@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
dcn10_translate_regamma_to_hw_format costs 750us to run, it cannot be
called within isr, check update flag before calling, only do it for
full update.
Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Tony Cheng <tony.cheng@amd.com>
Reviewed-by: Yongqiang Sun <yongqiang.sun@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
None of this needs to be a function table or dynamic in any way.
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Yue Hin Lau <Yuehin.Lau@amd.com>
Reviewed-by: Eric Bernstein <Eric.Bernstein@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Check update flags and update dchub and dpp as per flags,
reduce reg access from 347 to 200, duration time reduce
to 170us.
Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Move update_plane_addr to apply_ctx_for_surface, address update will
just be called once, not twice for updat type is full and medium.
This will reduce some reg access and duration time.
Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Yue Hin Lau <Yuehin.Lau@amd.com>
Reviewed-by: Eric Bernstein <Eric.Bernstein@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It was incorrectly referencing the dc parameter, resulting in an empty
description of the dc_log parameter.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Prevent buggy userspace from spamming dmesg.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Let userspace know how much area we have above the 48bit VA hole on
Vega10.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Userspace buggy userspace can spam the logs.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Similar to the CPU address space the VA on Vega10 has a hole in it.
v2: use dev_dbg instead of dev_err
v3: add some more comments to explain how the hw works
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
CC: stable@vger.kernel.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Instead of the global statistics use the per context bytes moved counter.
v2: rebased
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Tested-by: Dieter Nützel <Dieter@nuetzel-hh.de>
Tested-by: Michel Dänzer <michel.daenzer@amd.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This way we can finally use some more stats.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Tested-by: Dieter Nützel <Dieter@nuetzel-hh.de>
Tested-by: Michel Dänzer <michel.daenzer@amd.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add some statistics how many bytes we have moved.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Tested-by: Dieter Nützel <Dieter@nuetzel-hh.de>
Tested-by: Michel Dänzer <michel.daenzer@amd.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Instead of passing the parameters manually.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Tested-by: Dieter Nützel <Dieter@nuetzel-hh.de>
Tested-by: Michel Dänzer <michel.daenzer@amd.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Instead of passing down the parameters manually to every function.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Tested-by: Dieter Nützel <Dieter@nuetzel-hh.de>
Tested-by: Michel Dänzer <michel.daenzer@amd.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Instead of specifying interruptible and no_wait_gpu manually.
v2: rebase
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Tested-by: Dieter Nützel <Dieter@nuetzel-hh.de>
Tested-by: Michel Dänzer <michel.daenzer@amd.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Instead of specifying if sleeping should be interruptible.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Tested-by: Dieter Nützel <Dieter@nuetzel-hh.de>
Tested-by: Michel Dänzer <michel.daenzer@amd.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Give moving a BO into place an operation context to work with.
v2: rebased
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Tested-by: Dieter Nützel <Dieter@nuetzel-hh.de>
Tested-by: Michel Dänzer <michel.daenzer@amd.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
to indicate page order for each element in the pool
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Roger He <Hongbo.He@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Roger He <Hongbo.He@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This is a followup to:
drm/amd/powerplay: Fix buffer overflows with mc_reg_address
Rework *_set_mc_special_registers for the other architectures to
use the same logic as the first patch. This allows the last entry
of the array to be filled without an error message for example.
This doesn't fix any known problems, perhaps avoided by luck.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Ernst Sjöstrand <ernstp@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Smatch warned about the following lines:
ci_set_mc_special_registers() error: buffer overflow 'table->mc_reg_address' 16 <= 16
tonga_set_mc_special_registers() error: buffer overflow 'table->mc_reg_address' 16 <= 16
Change the logic to check before access instead of after incrementing.
It's fine if j reaches max after we're done. This allows the last entry
of the array to be filled without an error message for example.
Changed some whitespace to clarify grouping.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Ernst Sjöstrand <ernstp@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reported by smatch:
amdgpu_atombios_i2c_process_i2c_ch() error: we previously assumed 'buf' could be null
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Ernst Sjöstrand <ernstp@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Ernst Sjöstrand <ernstp@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reported by smatch:
init_overdrive_limits() error: uninitialized symbol 'result'.
get_clock_voltage_dependency_table() warn: inconsistent indenting
v2: set result to 0 (Alex)
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Ernst Sjöstrand <ernstp@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Turned out that VCE still has a placement restriction that BOs can't
cross a 4GB boundary.
Fix this by adding a command submission parser prepass to correctly
place the buffers.
v2: add function description
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For VCE to work properly the start of the GTT space must be aligned to a
4GB boundary.
v2: add comment why we do this
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove some outdated comments and all code which tries to reduce the VRAM size
mapped into the MC.
This is superfluous and misleading since we never actually program the size.
v2: handle gmc_v6_0.c as well
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Line continuations with excess spacing causes unexpected output.
Miscellanea:
o Added missing '\n' to a few of the coalesced pr_<level> formats
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Make use of the swap macro instead of _manually_ swapping values
and remove unnecessary variable swap.
This makes the code easier to read and maintain.
This code was detected with the help of Coccinelle.
Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Make use of the swap macro instead of _manually_ swapping values
and remove unnecessary variable temp.
This makes the code easier to read and maintain.
This code was detected with the help of Coccinelle.
Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To avoid spamming the logs on non-ECC boards.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixing warning/compile errors on 32bit kernels.
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use kcalloc instead of kzalloc and the cast on the return from kzalloc is
unnecessary and can be removed.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Not used any more.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There is no guarantee that the next entry on the ddelete list stays on
the list when we drop the locks.
Completely rework this mess by moving processed entries on a temporary
list.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-and-Tested-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The code path isn't hit at the moment, but we need to take the lock to
add the BO back to the LRU.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-and-Tested-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Roger He <Hongbo.He@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Don't even try to resize the BAR when there is no window above 4GB.
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch fixes static checker warning of
"warn: cast after binop" introduced by
56087b31 drm/amd/display: fix high part address in dm_plane_helper_prepare_fb()
Signed-off-by: Shirish S <shirish.s@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
virtual DCE Timer structure is already released
after its sw_fini(), so we need to cancel the
its Timer in hw_fini() otherwise the Timer canceling
is missed.
v2:
use for loop and num_crtc to replace original code
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
this fix the issue that access memory after freed
after driver unloaded.
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
use bo_create/free_kernel instead of manually doing it
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
instead of doing it in each GFX ip's sw_fini
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
NULL pointer is because original logic will step into
set_pde_pte() even after the gart.ptr is freed due to
there are twice gart_unbind() on all gart area.
also, there are other minor fixes:
1,since gart_init only create dummy page, the corresponding
gart_fini shouldn't do more like unbinding all GART, this is
unnecessary because in driver fini stage all GART unbinding
had already been done during each IP's SW_FINI (GMC's
SW_FINI is the last one called), so remove the step
for the GART unbinding in gart_fini().
2,gart_fini() is already invoked during each GMC IP's gart_fini
routine,e.g. gmc_vx_0_gart_fini(), so no need to manually
call it during ttm_fini().
3,amdgpu_gem_force_release() should be put ahead of
amdgpu_vm_manager_fini()
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
for gart_ram_alloc/free, they are never used in driver thus
ripe them out totally.
for gart_vram_pin/unpin, they are not needed becuase we can
use bo_creat_kernel/free to replace the original manual way
in the gart_vram_alloc/free, thus gart_vram_pin/unpin can
also be riped out.
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This can be triggered by userspace, e.g. trying to allocate too large a
BO, so it shouldn't log anything by default.
Callers need to handle failure anyway.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
keep consistency with threshold of swapout
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Roger He <Hongbo.He@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Make initialization code check the ECC related registers, which are initialized
by the VBIOS, to see if ECC is present and initialized and DRM_INFO() the
result.
Signed-off-by: David Panariti <David.Panariti@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add header files with ECC related definitions
(MASKs, SHIFTs, DEFAULTs and OFFSETS).
Signed-off-by: David Panariti <David.Panariti@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Deleted BOs with the same reservation object can be reaped even if they
can't be reserved.
v2: rebase and we still need to remove/add the BO from/to the LRU.
v3: fix remove/add one more time, cleanup the logic a bit
v4: we should still check if the eviction is valuable
v5: add comment suggested by Michel
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-and-Tested-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use the cached values rather than hardcoding it.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use the cached values rather than hardcoding it.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use the cached values rather than hardcoding it.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
on stream_for_cursor. Initialize to NULL.
Signed-off-by: Leo (Sunpeng) Li <sunpeng.li@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We still require the update_plane_addr call in commit_planes_for_stream.
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Tony Cheng <tony.cheng@amd.com>
Reviewed-by: Sun peng Li <Sunpeng.Li@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Needed for the next patch.
v2: actually predicate all unlocks
v3: add some cleanups suggested by Michel.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-and-Tested-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There's no need to have this as a vtable. The vtable was initially
used for stream_adjust_vmin_vmax but the condition checked here
(set_drr) is always true, hence we don't need to assign this
dynamically anymore.
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
for video scaling changes,
Reduce reg access count from 1044 to 447, duration time
from 4.6ms to 3ms.
Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
'struct mpc *mpc' is not used.
Signed-off-by: Leo (Sunpeng) Li <sunpeng.li@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This allows us to properly clear and set the update flags for all cases.
Signed-off-by: Andrew Jiang <Andrew.Jiang@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Also initialize this to 64 for all ASICs.
Signed-off-by: Andrew Jiang <Andrew.Jiang@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
plane update prior to stream enablement is there to recombine pipe
in case we need free pipe for new display. need to pass in new state
or we will just re-applyingwhat we already have
Signed-off-by: Tony Cheng <tony.cheng@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This way, we can know exactly what triggered the update type we're
looking at, and we can simplify the logic for determining what exactly
needs to be updated in the future.
Also allow a dst rect size increase to go through a medium update,
since that does not require us to increase clock or bandwidth.
Signed-off-by: Andrew Jiang <Andrew.Jiang@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We shouldn't be able to get a non-visible plane into DC anymore.
Signed-off-by: Andrew Jiang <Andrew.Jiang@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The fail goto is incorrect. It will incorrectly release the dc_states on
stream programming failure.
Signed-off-by: Leo (Sunpeng) Li <sunpeng.li@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This is a follow-up to the following change:
Yongqiang Sun: Program front end first when set mode.
Due to pipe-splitting features, how we handle stream enabling and
disabling needs to change.
In the case of pipe split disable, two planes need to be combined back
into the same stream. This needs to be done before any stream
programming happens.
The previous patch addresses this, but breaks cross-platform
compatibility. It's not guaranteed that a dc commit will be called
separately to program planes and streams.
Therefore, we handle the combined commit case by doing plane programming
both before and after stream programming, to handle pipe split disable
and plane enable respectively.
Signed-off-by: Leo (Sunpeng) Li <sunpeng.li@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When disabling pipe splitting, we need to make sure we disable both
planes used.
This should be done for Linux as well.
Signed-off-by: Leo (Sunpeng) Li <sunpeng.li@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In case of update type is medium, optimize squence,
reduce programing time.
Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
also simplifying syntax and removing unused variable in
dce110_apply_ctx_for_surface()
Signed-off-by: Roman Li <Roman.Li@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Power on one plane after disable all the planes, for
a hw bug work around to resolve stutter efficiency issue.
Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Make it so that differing dcc and plane size fields don't necessarily
result in a full update, along with upscaling modes. This allows us to
save some unnecessary full updates.
Signed-off-by: Andrew Jiang <Andrew.Jiang@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Andrew Jiang <Andrew.Jiang@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
output signal used to be a public member to be used by DM to override
the stream signal. Now since there is no longer separation between
public and private part of stream, they are combined. The overriding
was not working properly as well, which is addressed by this change
Signed-off-by: Eric Yang <Eric.Yang2@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
arr_points[1] and [2] were duplicated. Remove the extra
one. If we ever need more points we can add them but the
current state of affairs is confusing.
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Tony Cheng <tony.cheng@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Temporary solution to fix gamma adjustment not
working.
Signed-off-by: Eric Yang <Eric.Yang2@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
New scaler parameter assign to dpp is after early return,
cause next flip scaler not program.
Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Tony Cheng <tony.cheng@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Eric Bernstein <eric.bernstein@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The ALLOW_SR registers might not always be available.
Signed-off-by: Ken Chalmers <ken.chalmers@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: SivapiriyanKumarasamy <sivapiriyan.kumarasamy@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
SMU can future lower voltages in long idle case when all display is off.
If all display output is turned off via DPMS, send display_count = 0
after all output are turned off.
otherwise send display_count msg before turning on display to make sure
SMU exit S0i2 state. before is not neccessary as we are out of S0i2
when driver execute code, but send message before anyways for correctness.
Signed-off-by: Hersen Wu <hersenxs.wu@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Optimized front end initial sequence, reset MPC module
properly.
Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When new coefficients match cached we would skip setting regamma mode
Also, when doing a stream update we would program regamma for all pipes,
even thos that are not yet powered on. This resulted in never setting
regamma since we would cache before the pipe is powered.
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Trying to align with kernel coding style and make it a bit more
readable.
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There are different code to disable front end, it is
difficult to debug and adding new process.
This refactor makes all disable front end call the same
functions.
Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Tony Cheng <tony.cheng@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Yue Hin Lau <Yuehin.Lau@amd.com>
Reviewed-by: Yuehin Lau <Yuehin.Lau@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Tony Cheng <tony.cheng@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Yue Hin Lau <Yuehin.Lau@amd.com>
Reviewed-by: Eric Bernstein <Eric.Bernstein@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Added a function to blank data using OPP DPG.
Clean up code to prepare for pseudocode review with HW.
Signed-off-by: Eric Bernstein <eric.bernstein@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Tony Cheng <tony.cheng@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This saves us about 5000 reg writes per full update. This translates to about
40000 writes over the course of single eDP bootup.
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
dc_link is at a higher level than link_encoder, and we only want
higher-level components to be able to access lower-level ones,
not the other way around.
Signed-off-by: Andrew Jiang <Andrew.Jiang@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Previous code threw a warning about misleading indentation
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Mikita Lipski <Mikita.Lipski@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Clear OPTC underflow status when init_hw.
Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Eric Yang <Eric.Yang2@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Yue Hin Lau <Yuehin.Lau@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Also move some register definitions to common DCN regs.
Signed-off-by: Eric Bernstein <eric.bernstein@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Tony Cheng <tony.cheng@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
no logic change
Signed-off-by: Yue Hin Lau <Yuehin.Lau@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
