As part of the system requirement for powersaving is that we always have
a context loaded. Upon boot and resume, we load the kernel_context to
ensure that some valid state is set before powersaving kicks in, we
should do so after a full GPU reset as well. We only need to do so for
an idle engine, as any active engines will restart by executing the
stuck request, loading its context. For the idle engine, we create a
new request to load the kernel_context instead.
For whatever reason, perfoming a dummy execute on the idle engine after
reset papers over a subsequent GPU hang in rare circumstances, even on
machines not using contexts (e.g. Pineview).
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=104259
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=104261
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Michel Thierry <michel.thierry@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171216000334.8197-1-chris@chris-wilson.co.uk
At the beginning of a reset, we disable the submission method and find
the stuck request. We expect to find a stuck request for we have
declared the engine stalled. However, if we find no active request, the
engine must have recovered from its stall before we could issue a reset,
so let the engine continue on without a reset. If the engine is truly
stuck, we will back soon enough with the next reset attempt.
v2: Remove the stale debug message.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michel Thierry <michel.thierry@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Michel Thierry <michel.thierry@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171216002206.31737-1-chris@chris-wilson.co.uk
The null check on aconnector->base.edid_blob_ptr->data is redundant
since data is an array and can never be null. Remove it.
Detected by CoverityScan, CID#1460369 ("Array compared against 0")
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Same as previous asics. This was not yet set for gfx9.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
With introduction of amdgpu_gpu_recovery we don't need any more
to rely on amdgpu_lockup_timeout == 0 for disabling GPU reset.
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add new parameter to control GPU recovery procedure.
v2:
Add auto logic where reset is disabled for bare metal and enabled
for SR-IOV.
Allow forced reset from debugfs.
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
include ttm_bo_move_memcpy and ttm_bo_move_ttm
Signed-off-by: Roger He <Hongbo.He@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
allow eviction of BOs reserved by the caller when they are
not part of the current working set.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Roger He <Hongbo.He@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
enable eviction of other per VM BOs during allocation and allows
reaping of deleted BOs during CS.
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Roger He <Hongbo.He@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Just printk the string, or at least do not double up on the newlines!
Fixes: eef57324d9 ("drm/i915: setup bridge for HDMI LPE audio driver")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Cc: Jerome Anand <jerome.anand@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171213182858.2159-1-chris@chris-wilson.co.uk
Internal objects consistent of scratch pages not subject to the
persistence guarantees of user facing objects. They are used for
example, in ring buffers where they are only required for temporary
storage of commands that will be rewritten every time. As they are
temporary constructs, quietly report -ENOMEM back along the callchain
rather than subject the system to oomkiller if an allocation fails.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171215101753.1519-1-chris@chris-wilson.co.uk
DK put some nice docs into the commit introducing driver private
state, but in the git history alone it'll be lost.
Also, since Ville remove the void* usage it's a good opportunity to
give the driver private stuff some tlc on the doc front.
Finally try to explain why the "let's just subclass drm_atomic_state"
approach wasn't the greatest, and annotate all those functions as
deprecated in favour of more standardized driver private states. Also
note where we could/should extend driver private states going forward
(atm neither locking nor synchronization is handled in core/helpers,
which isn't really all that great).
v2: Spelling and phrasing improvements (Alex, DK).
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171214203054.20141-5-daniel.vetter@ffwll.ch
Complete a few missing bits, fix up the existing xcross-references and
add a bunch more.
v2: Fix typos (Alex).
Cc: Dave Airlie <airlied@gmail.com> via lists.freedesktop.org
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171214203054.20141-4-daniel.vetter@ffwll.ch
Also some breadcrumbs for how exactly to find this. Probably should
pass drm_connector * or at least drm_display_info * to that function
instead. But drm_hdmi_avi_infoframe_quant_range probably also wants
drm_connector_state (and the hdmi stuff moved into that), so this is a
bit more work.
v2: Fix typo (Alex).
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Fixes: 9271c0ca57 ("drm/edid: Don't send non-zero YQ in AVI infoframe for HDMI 1.x sinks")
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171214203054.20141-2-daniel.vetter@ffwll.ch
Merge misc fixes from Andrew Morton:
"17 fixes"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
arch: define weak abort()
mm, oom_reaper: fix memory corruption
kernel: make groups_sort calling a responsibility group_info allocators
mm/frame_vector.c: release a semaphore in 'get_vaddr_frames()'
tools/slabinfo-gnuplot: force to use bash shell
kcov: fix comparison callback signature
mm/slab.c: do not hash pointers when debugging slab
mm/page_alloc.c: avoid excessive IRQ disabled times in free_unref_page_list()
mm/memory.c: mark wp_huge_pmd() inline to prevent build failure
scripts/faddr2line: fix CROSS_COMPILE unset error
Documentation/vm/zswap.txt: update with same-value filled page feature
exec: avoid gcc-8 warning for get_task_comm
autofs: fix careless error in recent commit
string.h: workaround for increased stack usage
mm/kmemleak.c: make cond_resched() rate-limiting more efficient
lib/rbtree,drm/mm: add rbtree_replace_node_cached()
include/linux/idr.h: add #include <linux/bug.h>
Add a variant of rbtree_replace_node() that maintains the leftmost cache
of struct rbtree_root_cached when replacing nodes within the rbtree.
As drm_mm is the only rb_replace_node() being used on an interval tree,
the mistake looks fairly self-contained. Furthermore the only user of
drm_mm_replace_node() is its testsuite...
Testcase: igt/drm_mm/replace
Link: http://lkml.kernel.org/r/20171122100729.3742-1-chris@chris-wilson.co.uk
Link: https://patchwork.freedesktop.org/patch/msgid/20171109212435.9265-1-chris@chris-wilson.co.uk
Fixes: f808c13fd3 ("lib/interval_tree: fast overlap detection")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Acked-by: Davidlohr Bueso <dbueso@suse.de>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The code has an ifdef and uses two functions to either init the bare
spinlock or init it and set a lock-class. It is possible to do the same
thing without an ifdef.
With this patch (in debug case) we first use the "default" lock class
which is later overwritten to the supplied one. Without lockdep the set
name/class function vanishes.
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171214131009.7479-1-joonas.lahtinen@linux.intel.com
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
v2:
remove SUBPTB member
v3:
remove last_level, use AMDGPU_VM_PTB directly instead.
Signed-off-by: Chunming Zhou <david1.zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Tony Cheng <tony.cheng@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Jordan Lazare <Jordan.Lazare@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Jordan Lazare <Jordan.Lazare@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We already check this a couple lines earlier.
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Jordan Lazare <Jordan.Lazare@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Yue Hin Lau <Yuehin.Lau@amd.com>
Reviewed-by: Eric Bernstein <Eric.Bernstein@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It may take over 200ms for wait hpd ready. To optimize the resume time,
we can power on eDP in init_hw, wait for hpd ready when doing link
training.
also create separate eDP enable function to make sure eDP is powered up
before doing and DPCD access, as HPD low will result in DPDC transaction
failure.
After optimization,
setpowerstate 145ms -> 9.8ms,
DPMS 387ms -> 18.9ms
Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Signed-off-by: Tony Cheng <tony.cheng@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Eric Yang <Eric.Yang2@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Reviewed-by: Andrew Jiang <Andrew.Jiang@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Move OPP initialization of mpc tree parameters to hw_init function.
Signed-off-by: Eric Bernstein <eric.bernstein@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use REG_UPDATE instead of REG_SET for programming MPC out mux.
Signed-off-by: Eric Bernstein <eric.bernstein@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When convert from fixed31_32 to other fixed point
format use math operation round instead of floor.
Signed-off-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Reviewed-by: Roman Li <Roman.Li@amd.com>
Reviewed-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Yue Hin Lau <Yuehin.Lau@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Also handle fixpoint y values for CM curves
Signed-off-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Yue Hin Lau <Yuehin.Lau@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This has proven helpful on other OSes to give a quick state of the
DC driver when a bug is reported.
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
REG_UPDATE_2 return the reg value it write out through MMIO
we need to do a REG_READ to confirm the value is written out
Signed-off-by: Tony Cheng <tony.cheng@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This code can sometimes look troubling but we trust it as it comes from
HW teams with a guarantee of correctness. Add a note to these files to
explain this.
v2: thing -> things
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In code provided by HW teams we do a NaN check on floats
by comparing the number against itself. This confuses most
people including myself. Macro it out to make it self-explanatory.
Don't do a NaN check for int.
v2: parantheses around 'number' expression
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Tony Cheng <tony.cheng@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This prevents an issue where the MPCC will not go to idle due to us not
waiting for it to become idle during disable plane.
Signed-off-by: Andrew Jiang <Andrew.Jiang@amd.com>
Signed-off-by: Tony Cheng <tony.cheng@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
- Only update DPP clock if it's a full update.
- Program viewport on position change. This caused SLS regressions.
Signed-off-by: Andrew Jiang <Andrew.Jiang@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When programming cursor position after front end programmed,
if position is already set previously, it doesn't make sense
to program position with all 0.
Cache position and use the parameter after front end programming.
Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cursor is abnormal after pipe_ctx is changed in context.
Cause: cursor attributes is programmed right after front end
programming, but it use old pipe_ctx to program which is not
updated yet.
Solution:
Program cursor regs after context swapped.
Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixed fliped landscape and fliped portrait hard hang.
Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Create opp_set_test_pattern function with similar interface
and implementation as timing generator test pattern.
Signed-off-by: Eric Bernstein <eric.bernstein@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add color module to diagnostic compilation
Signed-off-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
During HW initialization, instead of assuming or
detecting the existing MPCC mux configuration and
then removing existing planes, reset all the MPCC
muxes.
Signed-off-by: Eric Bernstein <eric.bernstein@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Yue Hin Lau <Yuehin.Lau@amd.com>
Reviewed-by: Eric Bernstein <Eric.Bernstein@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
HDR display playing video underflow is observed when switching
to full screen due to program a lower watermark right after unlock otg.
Instead of disable plane in next flip coming, if there is a
plane disconnected, after otg unlock wait for mpcc idle and disable
the plane, then program watermark. So there is enough warter mark to make
sure current frame data pass through.
Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Tony Cheng <tony.cheng@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Tony Cheng <tony.cheng@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Program the DCC registers when dcc_change is true.
Signed-off-by: Andrew Jiang <Andrew.Jiang@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Work around for a hw bug causing optc underflow if blank data
double buffer disable and remove mpcc.
Checking optc status after otg unlock, after wait mpcc idle
check status again, if optc underflow just happens after wait
mpcc idle, clear underflow status and enable blank data double
buffer.
Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rather than setting it every time there's a full update with surface
count > 0, set it when we need to do plane_atomic_disconnect. Also make
sure that we unset the flag in plane_atomic_disable, so that in the
event we run through a sequence where we do disconnect followed by an
immediate disable, we do not do unnecessarily request a passive flip to
do the optimization.
Signed-off-by: Andrew Jiang <Andrew.Jiang@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Leo (Sunpeng) Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There is already wait mpcc idle function. It is better
to use the same function for all wait mpcc idle.
Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix update_mpcc logic to only call assert_mpcc_idle_before_connect
if mpcc is not already being used (and required removal).
Update set_out_rate_control to include optional flow control parameter.
In init_mpcc_from_hw check for case where bot_sel is same as mpcc_id.
Signed-off-by: Eric Bernstein <eric.bernstein@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Found by smatch:
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc.c:506 construct() warn:
possible memory leak of 'dc_ctx'
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc.c:506 construct() warn:
possible memory leak of 'dc_vbios'
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc.c:506 construct() warn:
possible memory leak of 'dcn_ip'
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc.c:506 construct() warn:
possible memory leak of 'dcn_soc'
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
pipe_ctx->stream and pipe_ctx->plane_state are never NULL
Found by smatch:
drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_hw_sequencer.c:2111
set_default_colors() error: we previously assumed 'pipe_ctx->stream'
could be null (see line 2101)
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
plane_res.mi (memory interface) can never be NULL for DCE110
Found by smatch:
drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_hw_sequencer.c:2881
dce110_apply_ctx_for_surface() error: we previously assumed
'pipe_ctx->plane_res.mi' could be null (see line 2873)
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
NULL check issue found by smatch:
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_link.c:1976
dc_link_setup_psr() warn: variable dereferenced before check 'link' (see
line 1970)
We don't use these functions so might as well remove them.
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Integrating MPC pseudocode to support new blending cases
with secondary MPCC list.
This includes a design change to MPC data structures and
interfaces.
Signed-off-by: Eric Bernstein <eric.bernstein@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Tony Cheng <tony.cheng@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
in eDP+ HDMI/DP clone or extended configuration, audio inst changed from inst 1 to inst0.
No failure related this though, just playback device endpoint inst changed.
Also remove one addition register read.
Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Before power gate plane, mpcc idle wait is processed,
no need to wait another time.
Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Roger He <Hongbo.He@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Knowing the state of the engine when hangcheck thinks it is stalling is
useful for both debugging hangcheck itself and the potential cause of an
unwanted stall.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171214122613.26134-1-chris@chris-wilson.co.uk
kerneldoc for drm_plane_create_zpos_property() says that the DRM core
will automatically calculate the normalized zpos values, but it doesn't
actually do that anymore since commit 38d868e41c ("drm: Don't force
all planes to be added to the state due to zpos"). Instead, drivers are
supposed to explicitly call the drm_atomic_normalize_zpos() function.
Change the kerneldoc comment to reflect that.
v2: reference the commit that introduced the kerneldoc unclarity
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171120150959.26913-1-thierry.reding@gmail.com
We have the selftest that's checking doorbell create/destroy, so there's
no need to check all doorbells delaying the reset every time.
We do want to have that extra sanity check at module load/unload though.
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Michel Thierry <michel.thierry@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171213221352.7173-7-michal.winiarski@intel.com
We can now move the clients allocation to submission_init path, rather
than keeping the condition inside submission_enable called on every
reset.
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Michel Thierry <michel.thierry@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171213221352.7173-6-michal.winiarski@intel.com
Full GPU reset causes GuC to be reset. This means that every time we're
doing a reset, we need to talk to GuC and tell it about doorbells.
Let's separate the communication part (create_doorbell) from our
internal bookkeeping (reserve_doorbell) so that we can cleanly separate
the initialization done at module load from reinitialization done at
reset in the following patch.
While I'm here, let's also add a proper (although slightly asymetric)
cleanup that doesn't try to communicate with GuC after it's already
gone, getting rid of "expected" warnings caused by GuC action failures
on module unload.
Note that I've also removed one of the tests (bitmap out of sync), since
it doesn't make much sense anymore - bitmaps are now not expected to
change during the lifetime of a client.
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Michel Thierry <michel.thierry@intel.com>
Reviewed-by: Michel Thierry <michel.thierry@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171213221352.7173-5-michal.winiarski@intel.com
To make this operation a bit cleaner, we should make sure that the HW
can catch up by calling the new implementation right away.
Note that currently we're only touching the vfunc at module load time
(before GuC is even loaded), so this shouldn't cause any functional
changes.
Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171213221352.7173-4-michal.winiarski@intel.com
After GPU reset, GuC HW needs to be reinitialized (with FW reload).
Unfortunately, we're doing some extra work there (mostly allocating stuff),
work that can be moved to guc_init and called once at driver load time.
As a side effect we're no longer hitting an assert in
i915_ggtt_enable_guc on suspend/resume.
v2: Do not duplicate disable_communication / reset_guc_interrupts
v3: Add proper teardown after rebase
References: 04f7b24ecc ("drm/i915/guc: Assert that we switch between known ggtt->invalidate functions")
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171213221352.7173-3-michal.winiarski@intel.com
This case can been seen when creating the lease with the same objects passed.
[ 605.515097] 2 locks held by testapp/3337:
[ 605.519027] #0: (&dev->mode_config.idr_mutex){......}, at: [<ffff0000085f1664>] drm_mode_create_lease_ioctl+0x384/0x858
[ 605.530045] #1: (&dev->mode_config.idr_mutex){......}, at: [<ffff0000085f11bc>] drm_lease_destroy+0x2c/0x110
Which was causing the process to hang:
[ 605.398827] [<ffff0000080856cc>] __switch_to+0x94/0xa8
[ 605.404030] [<ffff000008c05d00>] __schedule+0x1b0/0x698
[ 605.409322] [<ffff000008c06224>] schedule+0x3c/0xa8
[ 605.414260] [<ffff000008c06628>] schedule_preempt_disabled+0x20/0x38
[ 605.420677] [<ffff000008c07370>] mutex_lock_nested+0x158/0x340
[ 605.426572] [<ffff0000085f11bc>] drm_lease_destroy+0x2c/0x110
[ 605.432389] [<ffff0000085cecf0>] drm_master_put+0xc0/0xc8
[ 605.437845] [<ffff0000085f175c>] drm_mode_create_lease_ioctl+0x47c/0x858
[ 605.444612] [<ffff0000085d4460>] drm_ioctl+0x198/0x448
[ 605.449811] [<ffff000008201134>] do_vfs_ioctl+0xa4/0x748
[ 605.455192] [<ffff000008201864>] SyS_ioctl+0x8c/0xa0
[ 605.460216] [<ffff000008082f4c>] __sys_trace_return+0x0/0x4
drm_mode_create_lease_ioctl() calls drm_lease_create() which acquires a lock
on dev->mode_config.idr_mutex. In case of failure, drm_lease_create() calls
drm_master_put() which in turn tries to acquire the same lock when calling
drm_lease_destroy().
v2: - Reverse the order at exit in case of fail, so that unlocking takes place
before dropping the reference.
- Include detail information about deadlock (Daniel Vetter)
Signed-off-by: Marius Vlad <marius-cristian.vlad@nxp.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20171213181048.32719-1-marius-cristian.vlad@nxp.com
RV implementation was missing these callbacks. Used
to fetch the clock values for other components.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Chunming Zhou <david1.zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
No longer used.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The expectation is that the base driver doesn't mess with these.
Some components interact with these directly so let the components
handle these directly.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The expectation is that the base driver doesn't mess with these.
Some components interact with these directly so let the components
handle these directly.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The golden register arrays were empty so the function was
effectively useless.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
They are not used any longer. We get the scratch register
locations from the vbios directly now.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cleans up and consolidates all of the per-asic logic.
v2: squash in "drm/amdgpu: fix NULL err for sriov detect" (Chunming)
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
PROBE_DEFER also uses system_wq to reprobe drivers, which means when
that again fails, and we try to flush the overall system_wq (to get
all the delayed connectore cleanup work_struct completed), we
deadlock.
Fix this by using just a single cleanup work, so that we can only
flush that one and don't block on anything else. That means a free
list plus locking, a standard pattern.
v2:
- Correctly free connectors only on last ref. Oops (Chris).
- use llist_head/node (Chris).
v3
- Add init_llist_head (Chris).
Fixes: a703c55004 ("drm: safely free connectors from connector_iter")
Fixes: 613051dac4 ("drm: locking&new iterators for connector_list")
Cc: Ben Widawsky <ben@bwidawsk.net>
Cc: Dave Airlie <airlied@gmail.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: <stable@vger.kernel.org> # v4.11+: 613051dac4 ("drm: locking&new iterators for connector_list"
Cc: <stable@vger.kernel.org> # v4.11+
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Gustavo Padovan <gustavo@padovan.org>
Cc: David Airlie <airlied@linux.ie>
Cc: Javier Martinez Canillas <javier@dowhile0.org>
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Guillaume Tucker <guillaume.tucker@collabora.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Kevin Hilman <khilman@baylibre.com>
Cc: Matt Hart <matthew.hart@linaro.org>
Cc: Thierry Escande <thierry.escande@collabora.co.uk>
Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Cc: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171213124936.17914-1-daniel.vetter@ffwll.ch
Since Michal introduced new user controllable errors other than -EIO
during i915_gem_init(), we need to actually unwind on the error path as
we have to abort the module load (and we expect to do so cleanly!).
As we now teardown key state and then mark the driver as wedged (on
EIO), we have to be careful to not allow ourselves to resume and
unwedge, thus attempting to use the uninitialised driver.
v2: Try not to free driver state for the suppressed EIO
v3: Use load-fault-injection to test both error/recovery paths.
References: 8620eb1dbb ("drm/i915/uc: Don't use -EIO to report missing firmware")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171213134347.4608-1-chris@chris-wilson.co.uk
There are a set of values in the drm_display_info structure for each
connector which hold information derived from EDID. These are computed
in drm_add_display_info. Before this patch, that was only called in
drm_add_edid_modes. This meant that they were only set when EDID was
present and never reset when EDID was not, as happened when the
display was disconnected.
One of these fields, non_desktop, is used from
drm_mode_connector_update_edid_property, the function responsible for
assigning the new edid value to the application-visible property.
Various drivers call these two functions (drm_add_edid_modes and
drm_mode_connector_update_edid_property) in different orders. This
means that even when EDID is present, the drm_display_info fields may
not have been computed at the time that
drm_mode_connector_update_edid_property used the non_desktop value to
set the non_desktop property.
I've added a public function (drm_reset_display_info) that resets the
drm_display_info field values to default values and then made the
drm_add_display_info function public. These two functions are now
called directly from drm_mode_connector_update_edid_property so that
the drm_display_info fields are always computed from the current EDID
information before being used in that function.
This means that the drm_display_info values are often computed twice,
once when the EDID property it set and a second time when EDID is used
to compute modes for the device. The alternative would be to uniformly
ensure that the values were computed once before being used, which
would require that all drivers reliably invoke the two paths in the
same order. The computation is inexpensive enough that it seems more
maintainable in the long term to simply compute them in both paths.
The API to drm_add_display_info has been changed so that it no longer
takes the set of edid-based quirks as a parameter. Rather, it now
computes those quirks itself and returns them for further use by
drm_add_edid_modes.
This patch also includes a number of 'const' additions caused by
drm_mode_connector_update_edid_property taking a 'const struct edid *'
parameter and wanting to pass that along to drm_add_display_info.
v2: after review by Daniel Vetter <daniel.vetter@ffwll.ch>
Removed EXPORT_SYMBOL_GPL for drm_reset_display_info and
drm_add_display_info.
Added FIXME in drm_mode_connector_update_edid_property about
potentially merging that with drm_add_edid_modes to avoid
the need for two driver calls.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20171213084427.31199-1-keithp@keithp.com
(danvet: cherry picked from commit 12a889bf4bca ("drm: rework delayed
connector cleanup in connector_iter") from drm-misc-next since
functional conflict with changes in -next and we need to make sure
both have the right version and nothing gets lost.)
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
There are a set of values in the drm_display_info structure for each
connector which hold information derived from EDID. These are computed
in drm_add_display_info. Before this patch, that was only called in
drm_add_edid_modes. This meant that they were only set when EDID was
present and never reset when EDID was not, as happened when the
display was disconnected.
One of these fields, non_desktop, is used from
drm_mode_connector_update_edid_property, the function responsible for
assigning the new edid value to the application-visible property.
Various drivers call these two functions (drm_add_edid_modes and
drm_mode_connector_update_edid_property) in different orders. This
means that even when EDID is present, the drm_display_info fields may
not have been computed at the time that
drm_mode_connector_update_edid_property used the non_desktop value to
set the non_desktop property.
I've added a public function (drm_reset_display_info) that resets the
drm_display_info field values to default values and then made the
drm_add_display_info function public. These two functions are now
called directly from drm_mode_connector_update_edid_property so that
the drm_display_info fields are always computed from the current EDID
information before being used in that function.
This means that the drm_display_info values are often computed twice,
once when the EDID property it set and a second time when EDID is used
to compute modes for the device. The alternative would be to uniformly
ensure that the values were computed once before being used, which
would require that all drivers reliably invoke the two paths in the
same order. The computation is inexpensive enough that it seems more
maintainable in the long term to simply compute them in both paths.
The API to drm_add_display_info has been changed so that it no longer
takes the set of edid-based quirks as a parameter. Rather, it now
computes those quirks itself and returns them for further use by
drm_add_edid_modes.
This patch also includes a number of 'const' additions caused by
drm_mode_connector_update_edid_property taking a 'const struct edid *'
parameter and wanting to pass that along to drm_add_display_info.
v2: after review by Daniel Vetter <daniel.vetter@ffwll.ch>
Removed EXPORT_SYMBOL_GPL for drm_reset_display_info and
drm_add_display_info.
Added FIXME in drm_mode_connector_update_edid_property about
potentially merging that with drm_add_edid_modes to avoid
the need for two driver calls.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20171213084427.31199-1-keithp@keithp.com
If we fail to allocate a request, we can reap the outstanding requests
and push them to the request's slab's freelist before trying again. This
forces us to ratelimit malicious clients that tie up all of the system
resources in requests, instead of causing a system-wide oom.
Testcase: igt/gem_shrink/execbuf1
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171212180652.22061-3-chris@chris-wilson.co.uk
If a fence allocation fails in a blocking context, we will sleep on the
fence as a last resort. We can therefore allow ourselves to fail and
sleep on the fence instead of triggering a system-wide oom. This allows
us to throttle malicious clients that are consuming lots of system
resources by capping the amount of memory used by fences.
Testcase: igt/gem_shrink/execbufX
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171212180652.22061-2-chris@chris-wilson.co.uk
As kmalloc is allowed to block (if given the right flags), mark up the
two i915_sw_fence routines that may call kmalloc as potential sleeping
routines.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171212180652.22061-1-chris@chris-wilson.co.uk
It is illegal to perform an immediate free of the struct irq_work from
inside the irq_work callback (as irq_work_run_list modifies work->flags
after execution of the work->func()). As we use the irq_work to
coordinate the freeing of the callback from two different softirq paths,
we need to defer the kfree from inside our irq_work callback, for which
we can use kfree_rcu.
Fixes: 81c0ed21aa ("drm/i915/fence: Avoid del_timer_sync() from inside a timer")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171213094802.28243-1-chris@chris-wilson.co.uk
If wait_for_engines() fails and we resort to declaring the HW wedged,
dump the engine state for debugging.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171211194135.27095-2-chris@chris-wilson.co.uk
Extract the timeout we use in i915_gem_idle_work_handler() and reuse it
for wait_for_engines() in i915_gem_wait_for_idle(). It too has the same
problem in sometimes having to wait for an extended period before the HW
settles, so make use of the same timeout.
References: 5427f20785 ("drm/i915: Bump wait-times for the final CS interrupt before parking")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171211194135.27095-1-chris@chris-wilson.co.uk
It never meant what it said, as it was always the total size of the
Global GTT and not a limit upon memory usage. Originally it served as a
quick guide to the largest batch that could be submitted by userspace,
an approximation to its maximum RSS, but was phrased badly. Today with
the 48b ppgtt, it is even more meaningless. Replace with a more specific
debug message; those wanting to know how much "video ram" they have
should consult the userspace libraries for the relevant approximation.
v2: Rebase
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171212113532.22574-1-chris@chris-wilson.co.uk
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Since on gen2, we do not universally have a GPU reset implementation, we
fail i915_reset() at intel_has_gpu_reset(). However, this is also
intentionally disabled for CI testing and so it only has a debug
message. Promote that debug message to a user-facing error message that
should explain why their machine became unusable following the GPU hang.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171211204040.22858-1-chris@chris-wilson.co.uk
this fix the VCE world switch hang issue
Signed-off-by: Frank Min <Frank.Min@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Should be 0.
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We are polling so no need for INT.
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
this VRAM evict is not needed and also cost 2seconds
to finish because the IRQ is software side disabled
before it.
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
fix calculation.
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
shrink_pages is in unit of Order after ttm_page_pool_free,
but it is used by nr_free in next round so need change
it into native page unit
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Roger He <Hongbo.He@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
And also provide the level for which we need a PDE.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Now instead of one submission for each PDE batch them together over all
PDs who need an update.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
No more double house keeping.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Not needed any more.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We can do this with a simple mask as well.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On Tonga VF, there're 2 sources updating wptr registers for
sdma3: 1) polling mem and 2) doorbell. When doorbell and polling
mem are both enabled on sdma3, there will be collision hit in
occasion between those two sources when ucode and h/w are doing
the updating on wptr register in parallel. Issue doesn't happen
on CP GFX/Compute since CP drops all doorbell writes when VF is
inactive. So enable polling mem and don't use doorbell for SDMA3.
Signed-off-by: Pixel Ding <Pixel.Ding@amd.com>
Reviewed-by: Monk Liu <monk.liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Horrible inefficient, but avoids problems when the root PD size becomes
to big.
v2: remove incr as well.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <davdi1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
That doesn't hit any more most of the time anyway.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Torture test for MM and VM support, can be used to evict all VRAM while
the system is under load.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove the superflous .debugfs_init callback and register all files in
amdgpu_device.c in just one function.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Keeps things consistent now that we make use of struct resource. This
should keep us covered in case we ever get huge amounts of stolen
memory.
v2: bunch of missing conversions (Chris)
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171211151822.20953-10-matthew.auld@intel.com
Kick it out of i915_ggtt and keep it grouped with dsm and dsm_reserved,
where it makes the most sense.
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171211151822.20953-9-matthew.auld@intel.com
Now that we are using struct resource to track the stolen region, it is
more convenient if we track the mappable region in a resource as well.
v2: prefer iomap and gmadr naming scheme
prefer DEFINE_RES_MEM
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171211151822.20953-8-matthew.auld@intel.com
Now that we are using struct resource to track the stolen region, it is
more convenient if we track the reserved portion of that region in a
resource as well.
v2: s/<= end + 1/< end/ (Chris)
v3: prefer DEFINE_RES_MEM
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171211151822.20953-7-matthew.auld@intel.com
Now that we are using struct resource to track the stolen region, it is
more convenient if we track dsm in a resource as well.
v2: check range_overflow when writing to 32b registers (Chris)
pepper in some comments (Chris)
v3: refit i915_stolen_to_dma()
v4: kill ggtt->stolen_size
v5: some more polish
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171211151822.20953-6-matthew.auld@intel.com
We duplicate the stolen discovery code in early-quirks and in i915,
however now that the stolen region is exported as a resource from
early-quirks we can nuke the duplication.
v2: check overflows_type
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171211151822.20953-5-matthew.auld@intel.com
If we attempt to wake up a waiter, who is currently checking the seqno
it will be in the TASK_INTERRUPTIBLE state and ttwu will report success.
However, it is actually awake and functioning -- so delay reporting the
actual wake up until it sleeps. This fixes some spurious claims of
missed_breadcrumbs when running under heavy load; i.e. sufficient load to
preempt away the newly woken waiter before they complete their checks.
However, it does so at the cost of a rare false negative; where the
waiter changes between the check and ttwu -- the only way to fix that
would be to extend the reporting from ttwu where the check could be done
atomically.
v2: Defend against !CONFIG_SMP
v3: Don't filter out calls to wake_up_process
v4: Drop risky microoptimisation to skip wakeups
Testcase: igt/drv_missed_irq # sanity check we do detect missed_breadcrumb()
Testcase: igt/gem_concurrent_blit # for generating false positives
References: https://bugs.freedesktop.org/show_bug.cgi?id=100007
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171209124710.1606-1-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
The intent here was that we would be listening to
i915_gem_request_unsubmit in order to cancel the signaler quickly and
release the reference on the request. Cancelling the signaler is done
directly via intel_engine_cancel_signaling (called from unsubmit), but
that does not directly wake up the signaling thread, and neither does
setting the request->global_seqno back to zero wake up listeners to the
request->execute waitqueue. So the only time that listening to the
request->execute waitqueue would wake up the signaling kthread would be
on the request resubmission, during which time we would already receive
wake ups from rejoining the global breadcrumbs wait rbtree.
Trying to wake up to release the request remains an issue. If the
signaling was cancelled and no other request required signaling, then it
is possible for us to shutdown with the reference on the request still
held. To ensure that we do not try to shutdown, leaking that request, we
kick the signaling threads whenever we disarm the breadcrumbs, i.e. on
parking the engine when idle.
v2: We do need to be sure to release the last reference on stopping the
kthread; asserting that it has been dropped already is insufficient.
Fixes: d6a2289d9d ("drm/i915: Remove the preempted request from the execution queue")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171208121033.5236-1-chris@chris-wilson.co.uk
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Even for the mock i915 device, we need to initialise the
drm.mode_config, as we may ultimately query whether there are any KMS
users deep in the bowels of some paths (e.g. eviction). As we initialise
drm.mode_config we must cleanup after ourselves!
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171209210835.32609-1-chris@chris-wilson.co.uk
In case function skl_format_to_drm returns -EINVAL, fmt turns into a huge
number as fmt is of type u32, hence there is an out-of-bounds read when
using fmt as an index for array skl_pixel_formats at line 225:
plane->bpp = skl_pixel_formats[fmt].bpp;
Fix this by comparing the value returned by function skl_format_to_drm
against the size of array skl_pixel_formats, so in case it is greater than
or equal to the number of items contained in skl_pixel_formats, print an
error message and return -EINVAL.
Addresses-Coverity-ID: 1462495
Addresses-Coverity-ID: 1462502 ("Out-of-bounds read")
Fixes: 9f31d1063b ("drm/i915/gvt: Add framebuffer decoder support")
Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
These 2 functions are coded by multiple person in multiple patches. The
'return' and 'goto err' are mix-used in same place, which cause the
function looks disorder. Unify to use only 'goto' so that the gvt lock
is acquired in one place and released in one place.
Signed-off-by: Pei Zhang <pei.zhang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Use drm_fb_cma_fbdev_init_with_funcs() and drm_fb_cma_fbdev_fini() which
relies on the fact that drm_device holds a pointer to the drm_fb_helper
structure. This means that the driver doesn't have to keep track of that.
Also use the drm_fb_helper functions directly.
Remove todo entry.
Cc: David Lechner <david@lechnology.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: David Lechner <david@lechnology.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Tested-by: David Lechner <david@lechnolgy.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171208193743.34450-11-noralf@tronnes.org
Add functions to report the vram_usage from the amdgpu_device
Signed-off-by: Kent Russell <kent.russell@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Some AMD motherboards without an APU have a broken CRAT table which
causes KFD initialization failures or incorrect information about
NUMA nodes, CPU cores or system memory. Ignore CRAT tables without
GPUs and rely on KFD's code to create a CRAT table for the CPU.
Signed-off-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Some systems have broken CRAT tables. Add a module option to ignore
a CRAT table.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
This is needed for enabling a user-mode workaround for an AQL queue
wrapping HW bug on Tonga.
Signed-off-by: Ben Goz <ben.goz@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
* Wrong value for max_waves_per_simd
* Missing ATC capability bit
Signed-off-by: Philip Cox <Philip.Cox@amd.com>
Signed-off-by: Kent Russell <kent.russell@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
For hardware blocks whose performance counters are accessed via MMIO
registers, KFD provides the support for those privileged blocks.
IOMMU is one of those privileged blocks. Most performance counter properties
required by Thunk are available at /sys/bus/event_source/devices/amd_iommu.
This patch adds properties to topology in KFD sysfs for information not
available in /sys/bus/event_source/devices/amd_iommu. They are shown at
/sys/devices/virtual/kfd/kfd/topology/nodes/0/perf/iommu/ formatted as
/sys/devices/virtual/kfd/kfd/topology/nodes/0/perf/<block>/<property>, i.e.
/sys/devices/virtual/kfd/kfd/topology/nodes/0/perf/iommu/max_concurrent.
For dGPUs, who don't have IOMMU, nothing appears under
/sys/devices/virtual/kfd/kfd/topology/nodes/0/perf.
Signed-off-by: Amber Lin <Amber.Lin@amd.com>
Signed-off-by: Kent Russell <kent.russell@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Generate and parse VCRAT tables for dGPUs in kfd_topology_add_device.
Some information that isn't available in the CRAT table is patched
into the topology after parsing.
HSA_CAP_DOORBELL_TYPE_1_0 is dependent on the ASIC feature
CP_HQD_PQ_CONTROL.SLOT_BASED_WPTR, which was not introduced in VI
until Carrizo. Report HSA_CAP_DOORBELL_TYPE_PRE_1_0 on Tonga ASICs.
v2: Added #include <linux/pci.h> to kfd_crat.c to make it compile
Signed-off-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Ben Goz <ben.goz@amd.com>
Signed-off-by: Amber Lin <Amber.Lin@amd.com>
Signed-off-by: Jay Cornwall <Jay.Cornwall@amd.com>
Signed-off-by: Kent Russell <kent.russell@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Currently, the KFD topology information is generated by parsing the CRAT
(ACPI) table. However, at present CRAT table is available only for AMD
APUs. To support CPUs on systems without a CRAT table, the KFD driver will
create a Virtual CRAT (VCRAT) table and then the existing code will parse
that table to generate topology.
Signed-off-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Change kfd_cache_properties.sibling_map[256] to
kfd_cache_properties.sibling_map[32]. Since, CRAT uses bitmap for
sibling_map, it is more efficient to use bitmap in the kfd structure
also.
Signed-off-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Only count memory banks in one place. Ignore redundant num_banks
entry in crat_subtype_computeunit.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Modify kfd_topology_enum_kfd_devices(..) function to support non-GPU
nodes. The function returned NULL when it encountered non-GPU (say CPU)
nodes. This caused kfd_ioctl_create_event and kfd_init_apertures to fail
for Intel + Tonga.
kfd_topology_enum_kfd_devices will now parse all the nodes and return
valid kfd_dev for nodes with GPU.
Signed-off-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Currently, CRAT parsing is intertwined with topology_device_list and
hence repeated calls to kfd_parse_crat_table() will fail. Decouple
kfd_parse_crat_table() and topology_device_list.
kfd_parse_crat_table() will parse CRAT and add topology devices to a
temporary list temp_topology_device_list and then
kfd_topology_update_device_list will move contents from temporary list to
master list.
Signed-off-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Kent Russell <kent.russell@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Reorganize and rename kfd_topology_get_crat_acpi function. In this way
acpi_get_table(..) needs to be called only once. This will also aid in
dGPU topology implementation.
Signed-off-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Kent Russell <kent.russell@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Take CRAT related functions out of kfd_topology.c and place them in
kfd_crat.c. This is the initial step of supporting more CRAT features,
i.e. creating virtual CRAT table for KFD devices without CRAT.
v2: Minor cleanup that was missed previously because code moved around
Signed-off-by: Amber Lin <Amber.Lin@amd.com>
Signed-off-by: Kent Russell <kent.russell@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Kobject created using kobject_create_and_add() can be freed using
kobject_put() when there is no referenece any more. However,
kobject memory allocated with kzalloc() has to set up a release
callback in order to free it when the counter decreases to 0.
Otherwise it causes memory leak.
Signed-off-by: Yong Zhao <yong.zhao@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Overwrite the active simd_count from KGD at driver loading time. This is
based on assumption that register GC_USER_SHADER_ARRAY_CONFIG won’t get
changed.
V2: remove the incorrect simd_count reported at loading module.
Signed-off-by: Flora Cui <flora.cui@amd.com>
Reviewed by: Yair Shachar< yair.shachar@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Add get_local_mem_info which provides more information about local
memory than get_vmem_size:
- public and private framebuffer size
- memory clock
Signed-off-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Ben Goz <ben.goz@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Comparing the state tested by intel_engine_is_idle() and printed by
intel_engine_dump(), the only bit not shown is whether or not the device
is wedged. Add that little bit of information to the pretty printer so
that if the engine fails to idle we can see why.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171208012303.25504-5-chris@chris-wilson.co.uk
Since a global reset affects the engine, include that along side the
per-engine reset counter when pretty printing the engine state in
intel_engine_dump().
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171208012303.25504-4-chris@chris-wilson.co.uk
Now that we have a common engine state pretty printer, we can use that
instead of the adhoc information printed when we miss a breadcrumb.
v2: Rearrange intel_engine_disarm_breadcrumbs() to avoid calling
intel_engine_dump() under the rb spinlock (Mika) and to pretty-print the
error state early so that we include the full list of waiters.
v3: Pass missed breadcrumb msg to pretty-printer as the header
v4: Preserve DRM_DEBUG_DRIVER filtering.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171208012303.25504-3-chris@chris-wilson.co.uk
Pass in a format string (and args) to specify the header to be emitted
along with the engine state when pretty-printing. This allows the header
to be emitted inside the drm_printer stream, so sharing the same prefix
and output characteristics (e.g. debug level and filtering).
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171208012303.25504-2-chris@chris-wilson.co.uk
When printing the execlist ports, we first print the ELSP header then
follow it with the pretty-printed request. Since switching to
drm_printer and show the output via printk, it automatically appends a
newline to each call (unlike the old seq_printf output). To avoid the
unwanted line break, construct the ELSP request header in a temporary
buffer.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171208012303.25504-1-chris@chris-wilson.co.uk
Chris requested this backmerge for a reconciliation on
drm_print.h between drm-misc-next and drm-intel-next-queued
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Remove the header where it's not used.
Acked-by: Christian Konig <christian.koenig@amd.com>
Signed-off-by: Shaoyun Liu <Shaoyun.Liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian Konig <christian.koenig@amd.com>
Signed-off-by: Shaoyun Liu <Shaoyun.Liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Handle dynamic offsets correctly in static arrays.
Acked-by: Christian Konig <christian.koenig@amd.com>
Signed-off-by: Shaoyun Liu <Shaoyun.Liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update the register access macros and functions to take into
account the new dynamic IP base offsets.
Acked-by: Christian Konig <christian.koenig@amd.com>
Signed-off-by: Shaoyun Liu <Shaoyun.Liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The base offsets of the IP blocks may change across
asics even though the relative register offsets
are the same for an IP. Handle this dynamically.
Acked-by: Christian Konig <christian.koenig@amd.com>
Signed-off-by: Shaoyun Liu <Shaoyun.Liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use drm_fb_cma_fbdev_init() and drm_fb_cma_fbdev_fini() which relies on
the fact that drm_device holds a pointer to the drm_fb_helper structure.
This means that the driver doesn't have to keep track of that.
Also use the drm_fb_helper functions directly.
Cc: Liviu Dudau <liviu.dudau@arm.com>
Cc: Brian Starkey <brian.starkey@arm.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171115142001.45358-20-noralf@tronnes.org
Use drm_fb_cma_fbdev_init() and drm_fb_cma_fbdev_fini() which relies on
the fact that drm_device holds a pointer to the drm_fb_helper structure.
This means that the driver doesn't have to keep track of that.
Also use the drm_fb_helper functions directly.
Cc: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20171115142001.45358-19-noralf@tronnes.org
Use drm_fb_cma_fbdev_init() and drm_fb_cma_fbdev_fini() which relies on
the fact that drm_device holds a pointer to the drm_fb_helper structure.
This means that the driver doesn't have to keep track of that.
Also use the drm_fb_helper functions directly.
Cc: Eric Anholt <eric@anholt.net>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20171115142001.45358-18-noralf@tronnes.org
Use drm_fb_cma_fbdev_init() and drm_fb_cma_fbdev_fini() which relies on
the fact that drm_device holds a pointer to the drm_fb_helper structure.
This means that the driver doesn't have to keep track of that.
Also use the drm_fb_helper functions directly.
Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20171115142001.45358-17-noralf@tronnes.org
Use drm_fb_cma_fbdev_init() and drm_fb_cma_fbdev_fini() which relies on
the fact that drm_device holds a pointer to the drm_fb_helper structure.
This means that the driver doesn't have to keep track of that.
Also use the drm_fb_helper functions directly.
Cc: Jyri Sarha <jsarha@ti.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Jyri Sarha <jsarha@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171115142001.45358-16-noralf@tronnes.org
Use drm_fb_cma_fbdev_init() and drm_fb_cma_fbdev_fini() which relies on
the fact that drm_device holds a pointer to the drm_fb_helper structure.
This means that the driver doesn't have to keep track of that.
Also use the drm_fb_helper functions directly.
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171115142001.45358-15-noralf@tronnes.org
Use drm_fb_cma_fbdev_init() and drm_fb_cma_fbdev_fini() which relies on
the fact that drm_device holds a pointer to the drm_fb_helper structure.
This means that the driver doesn't have to keep track of that.
Also use the drm_fb_helper functions directly.
Remove duplicate ldev assignment.
Cc: Yannick Fertre <yannick.fertre@st.com>
Cc: Philippe Cornu <philippe.cornu@st.com>
Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Cc: Vincent Abriou <vincent.abriou@st.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Philippe Cornu <philippe.cornu@st.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171115142001.45358-14-noralf@tronnes.org
Use drm_fb_cma_fbdev_init() and drm_fb_cma_fbdev_fini() which relies on
the fact that drm_device holds a pointer to the drm_fb_helper structure.
This means that the driver doesn't have to keep track of that.
Also use the drm_fb_helper functions directly.
Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Cc: Vincent Abriou <vincent.abriou@st.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20171115142001.45358-13-noralf@tronnes.org
Use drm_fb_cma_fbdev_init() and drm_fb_cma_fbdev_fini() which relies on
the fact that drm_device holds a pointer to the drm_fb_helper structure.
This means that the driver doesn't have to keep track of that.
Also use the drm_fb_helper functions directly.
Cc: Eric Anholt <eric@anholt.net>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20171115142001.45358-11-noralf@tronnes.org
Use drm_fb_cma_fbdev_init() and drm_fb_cma_fbdev_fini() which relies on
the fact that drm_device holds a pointer to the drm_fb_helper structure.
This means that the driver doesn't have to keep track of that.
Also use the drm_fb_helper functions directly.
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20171115142001.45358-8-noralf@tronnes.org
Use drm_fb_cma_fbdev_init() and drm_fb_cma_fbdev_fini() which relies on
the fact that drm_device holds a pointer to the drm_fb_helper structure.
This means that the driver doesn't have to keep track of that.
Also use the drm_fb_helper functions directly.
Cc: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171115142001.45358-6-noralf@tronnes.org
Add functions drm_fb_cma_fbdev_init(), drm_fb_cma_fbdev_fini() and
drm_fb_cma_fbdev_init_with_funcs(). These functions relies on the fact
that the drm_fb_helper struct is stored in dev->drm_fb_helper_private
so drivers don't need to store it.
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20171115142001.45358-3-noralf@tronnes.org
Implement primary plane update without having to go through a modeset
to achieve that; the hardware does not require such complexity. This
means we treat the primary plane as any other, allowing the format,
size, position and scaling to be updated via the normal plane ioctls.
This also allows us to seemlessly disable and re-enable the primary
plane when (eg) displaying full-frame video without any graphic
clipping the overlaid video - which saves wasting memory bandwidth
needlessly verifying that the colorkey is indeed filling the entire
primary plane.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
We must wait for the previous plane work to complete before moving
the overlay window, as it could overwrite our positioning update.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Move the overlay plane register update generation to a separate function
as this is independent of the legacy or atomic update.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Re-organise overlay register generation so that we do not have to wait
for the previous update to complete while creating the new state. This
allows the update to be fully prepared before queueing it for the next
interrupt.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Disable planes at the next blanking period rather than immediately.
In order to achieve this, we need to delay the clearing of dcrtc->plane
until after the next blanking period, so move that into a separate
work function. To avoid races, we also need to move its assignment in
the overlay code.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Avoid printing an error message when armada_drm_plane_work_queue() is
unable to get the vblank (eg, because we're doing a modeset.) Continue
to report the failure to the caller, so the caller can handle this.
Move the error message into armada_ovl_plane_update().
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Use drm_plane_helper_check_state() to check the overlay plane state
rather than drm_plane_helper_check_update(), as:
(1) using drm_plane_helper_check_state() provides a better migration
path to atomic modeset
(2) it avoids needless copies of drm rectangle structures, and so is
more efficient.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Only enable the HSMOOTH control bit if we are scaling horizontally,
otherwise it makes no sense to enable the horizontal scaler.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Move writes of LCD_SPU_SRAM_PARA1 under the irq lock, so that we can
add this to the frame updates at interrupt time when disabling a
plane.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Move the register update structure out of the overlay private structure
into armada_plane_work, as this is common to both the primary and
overlay planes.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Move the sending of events into the armada_plane_work structure, and
combine the processing in armada_drm_plane_work_call().
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Both the primary and overlay planes retire framebuffers in a similar
manner; this can be consolidated by moving the retirement up to the
armada_plane_work layer.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Move the overlay plane work out from under the spinlock so that both the
primary and overlay planes run their work in the same context. This is
necessary so that we can use frame works with the overlay plane.
However, we must update the CRTC registers under the spinlock, so fix up
the overlay code for that.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Clear the plane enable bit in the software state within
armada_drm_plane_disable() when disabling either the primary or
overlay planes.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Merge armada_drm_primary_disable() into armada_drm_crtc_plane_disable()
and rename to armada_drm_plane_disable(). Use this to simplify
armada_ovl_plane_disable().
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Wait for a second, and if we time out, cancel any pending work when
disabling the primary plane. This ensures that any pending work is
completed or cleaned up prior to the disable taking effect.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Add a work cancel callback, so that work items can add functionality to
clean themselves up when they are cancelled.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Store the plane in the armada_plane_work structure rather than passing
it around; it doesn't get used very much in the work structures, so
passing it around is a needless expense.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
armada_drm_plane_work_cancel()'s returned work structure is never used
or referenced, so it's pointless returning it. It's also pointless
because the caller doesn't have a clue what kind of work structure it
is.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
We weren't correctly calculating the YUV planar offsets for subsampled
chroma planes correctly - fix up the coordinates for planes 1 and 2.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Lookup the drm_format_info structure once when computing all the
framebuffer plane addresses by using drm_format_info(), rather than
repetitive lookups via drm_format_plane_cpp().
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
The UV swap code was not always programming things correctly when
the source origin box has been offset. Fix this.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Avoid powering down the overlay SRAM banks when disabling the primary
plane, thereby masking any overlay video. This feature is supposed to
allow us to cut the bandwidth required while displaying full-frame
overlay video.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
This driver can use drm_fb_helper_lastclose() as its .lastclose callback.
It can also use drm_fb_helper_output_poll_changed() as its
.output_poll_changed callback.
Cc: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20171205182504.41923-12-noralf@tronnes.org
This driver can use drm_fb_helper_lastclose() as its .lastclose callback.
It can also use drm_fb_helper_output_poll_changed() as its
.output_poll_changed callback.
Cc: Mark Yao <mark.yao@rock-chips.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20171205182504.41923-11-noralf@tronnes.org
This driver can use drm_fb_helper_lastclose() as its .lastclose callback.
It can also use drm_fb_helper_output_poll_changed() as its
.output_poll_changed callback.
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20171205182504.41923-9-noralf@tronnes.org
This driver can use drm_fb_helper_lastclose() as its .lastclose callback.
It can also use drm_fb_helper_output_poll_changed() as its
.output_poll_changed callback.
Cc: Rob Clark <robdclark@gmail.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20171205182504.41923-7-noralf@tronnes.org
This driver can use drm_fb_helper_lastclose() as its .lastclose callback.
It can also use drm_fb_helper_output_poll_changed() as its
.output_poll_changed callback.
Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20171205182504.41923-6-noralf@tronnes.org
This driver can use drm_fb_helper_lastclose() as its .lastclose callback.
It can also use drm_fb_helper_output_poll_changed() as its
.output_poll_changed callback.
Cc: Inki Dae <inki.dae@samsung.com>
Cc: Joonyoung Shim <jy0922.shim@samsung.com>
Cc: Seung-Woo Kim <sw0312.kim@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Inki Dae <inki.dae@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171205182504.41923-5-noralf@tronnes.org
This driver can use drm_fb_helper_lastclose() as its .lastclose callback.
It can also use drm_fb_helper_output_poll_changed() as its
.output_poll_changed callback.
Cc: Russell King <linux@armlinux.org.uk>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Russell King <rmk+kernel@armlinux.org.uk>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20171205182504.41923-4-noralf@tronnes.org
When intel_modeset_setup_plane_state() fails drop the local framebuffer
reference before jumping to the error, otherwise we leak the framebuffer.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Fixes: edde361711 ("drm/i915: Use atomic state to obtain load detection crtc, v3.")
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171207220025.22698-1-chris@chris-wilson.co.uk
Even fbc isn't using this stuff anymore, so time to remove it.
Cleaning up one small piece of the atomic conversion cruft at the time
...
Quick explanation on why the plane->fb assignment is ok to delete: The
core code takes care of the refcounting and legacy ->fb pointer
updating, but drivers are allowed to update it ahead of time. Most
legacy modeset drivers did that as part of their set_config callback
(since that's how the legacy/crtc helpers worked). In i915 we only
need that to make the fbc code happy.
v2: don't nuke the assignement of intel_crtc->config, I accidentally
set CI ablaze :-) Spotted by Maarten. And better explain why nuking
the ->fb assignement shouldn't set off alarm bells.
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171207143202.6021-1-daniel.vetter@ffwll.ch
It seems that the DMC likes to transition between the DC states a lot when
there are no connected displays (no active power domains) during command
submission.
This activity on DC states has a negative impact on the performance of the
chip with huge latencies observed in the interrupt handlers and elsewhere.
Simple tests like igt/gem_latency -n 0 are slowed down by a factor of
eight.
Work around it by introducing a new power domain named,
POWER_DOMAIN_GT_IRQ, associtated with the "DC off" power well, which is
held for the duration of command submission activity.
CNL has the same problem which will be addressed as a follow-up. Doing
that requires a fix for a DC6 context corruption problem in the CNL DMC
firmware which is yet to be released.
v2:
* Add commit text as comment in i915_gem_mark_busy. (Chris Wilson)
* Protect macro body with braces. (Jani Nikula)
v3:
* Add dedicated power domain for clarity. (Chris, Imre)
* Commit message and comment text updates.
* Apply to all big-core GEN9 parts apart for Skylake which is pending DMC
firmware release.
v4:
* Power domain should be inner to device runtime pm. (Chris)
* Simplify NEEDS_CSR_GT_PERF_WA macro. (Chris)
* Handle async DMC loading by moving the GT_IRQ power domain logic into
intel_runtime_pm. (Daniel, Chris)
* Include small core GEN9 as well. (Imre)
v5
* Special handling for async DMC load is not needed since on failure the
power domain reference is kept permanently taken. (Imre)
v6:
* Drop the NEEDS_CSR_GT_PERF_WA macro since all firmwares have now been
deployed. (Imre, Chris)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=100572
Testcase: igt/gem_exec_nop/headless
Cc: Imre Deak <imre.deak@intel.com>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk> (v2)
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Dmitry Rogozhkin <dmitry.v.rogozhkin@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> (v5)
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
[Imre: Add note about applying the WA on CNL as a follow-up]
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171205132854.26380-1-tvrtko.ursulin@linux.intel.com
On reference boards and derivatives, the HDMI Logic is powered by an external
5V regulator.
This regulator was set by the Vendor U-Boot, add optional support for it.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Tested-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1512561268-29806-4-git-send-email-narmstrong@baylibre.com
In the process of dmabuf_obj cleanup, the dmabuf_obj might be freed during
dmabuf_obj_put leaking intel_gvt_hypervisor_put_vfio_device.
Move intel_gvt_hypervisor_put_vfio_device and all the other dmabuf_obj ops
in front of dmabuf_obj_put and let every dmabuf_obj have a chance to call
intel_gvt_hypervisor_put_vfio_device to fix this leaking issue.
Fixes: e3a0d7976c53 ("drm/i915/gvt: Handle orphan dmabuf_objs")
Signed-off-by: Tina Zhang <tina.zhang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Both ROM/VGA region are not supported for vGPU in GVT. But if the device
model want to get those region, we should return the correct information
but not leave the structure with random data. Change to same operation
of BAR3-BAR5 which are also not supported by vGPU.
Refer to function @intel_vgpu_rw.
Signed-off-by: Pei Zhang <pei.zhang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Rename the files to reflect their real role - to switch the mmio context of
each vGPU engine.
v2: update Makefile.
Signed-off-by: Changbin Du <changbin.du@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
After engine mmio switched, software still need write workload
submission registers. So we can remove the MMIO barriar in MMIO
switch.
Signed-off-by: Changbin Du <changbin.du@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Select appropriate mmio list at initialization time, so we don't need to
do duplicated work at where requires the mmio list.
V2:
- Add a termination mark of mmio list.
Signed-off-by: Changbin Du <changbin.du@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
To improve the readability, let's remove the hard code for each mmio
definition. The raw offset remained as a comment, which give us an
offset based view.
This refine is to make it convenient for new platform enabling.
Signed-off-by: Changbin Du <changbin.du@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
QXL associates mouse state with its primary plane.
Destroying a primary plane and putting a new one in place has the side
effect of destroying the cursor as well.
This commit changes the driver to reapply the cursor any time a new
primary is created. It achieves this by keeping a reference to the
cursor bo on the qxl_crtc struct.
This fix is very similar to
commit 4532b241a4 ("drm/qxl: reapply cursor after SetCrtc calls")
which got implicitly reverted as part of implementing the atomic
modeset feature.
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Dave Airlie <airlied@redhat.com>
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1512097
Fixes: 1277eed5fe ("drm: qxl: Atomic phase 1: convert cursor to universal plane")
Cc: stable@vger.kernel.org
Signed-off-by: Ray Strode <rstrode@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
qxl_cursor_atomic_update allocs a bo for the cursor that
it never frees up at the end of the function.
This commit fixes that.
Signed-off-by: Ray Strode <rstrode@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
Currently on every submission, we recalculate the ELSP register offset
for the engine, after chasing the pointers to find the iomem base. Since
this is fixed for the lifetime of the driver, record the offset in the
execlists struct.
In practice the difference is negligible, it just happens to remove 27
bytes of eyesore pointer dancing from next to the hottest instruction
(which is itself due to stalling for a cache miss) in perf profiles of
the execlists_submission_tasklet().
v2: Trim off one more elsp local.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Michel Thierry <michel.thierry@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171207222434.17686-1-chris@chris-wilson.co.uk
In quite a few places, we have a list iteration over the vma on an
object that only want to inspect GGTT vma. By construction, these are
placed at the start of the list, so we have copied that knowledge into
many callsites. Pull that knowledge back to i915_vma.h and provide a
for_each_ggtt_vma() to tidy up the code.
v2: Add a backreference from vma_create() to remind ourselves why we put
ggtt vma at the head of the obj->vma_list (and ppgtt vma at the tail).
v3: Fixup s/vma/V/
Suggested-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20171207211407.31549-1-chris@chris-wilson.co.uk
- Init clock gate fix (Ville)
- Execlists event handling corrections (Chris, Michel)
- Improvements on GPU Cache invalidation and context switch (Chris)
- More perf OA changes (Lionel)
- More selftests improvements and fixes (Chris, Matthew)
- Clean-up on modules parameters (Chris)
- Clean-up around old ringbuffer submission and hw semaphore on old platforms (Chris)
- More Cannonlake stabilization effort (David, James)
- Display planes clean-up and improvements (Ville)
- New PMU interface for perf queries... (Tvrtko)
- ... and other subsequent PMU changes and fixes (Tvrtko, Chris)
- Remove success dmesg noise from rotation (Chris)
- New DMC for Kabylake (Anusha)
- Fixes around atomic commits (Daniel)
- GuC updates and fixes (Sagar, Michal, Chris)
- Couple gmbus/i2c fixes (Ville)
- Use exponential backoff for all our wait_for() (Chris)
- Fixes for i915/fbdev (Chris)
- Backlight fixes (Arnd)
- Updates on shrinker (Chris)
- Make Hotplug enable more robuts (Chris)
- Disable huge pages (TPH) on lack of a needed workaround (Joonas)
- New GuC images for SKL, KBL, BXT (Sagar)
- Add HW Workaround for Geminilake performance (Valtteri)
- Fixes for PPS timings (Imre)
- More IPS fixes (Maarten)
- Many fixes for Display Port on gen2-gen4 (Ville)
- Retry GPU reset making the recover from hang more robust (Chris)
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJaIf0wAAoJEPpiX2QO6xPK/wAH/0JrYX+oml+ZJ7xV4wxm0S5S
K8jcSWQPlF78xkuiVaA0200qOPJP4Yp32Gmv7dVBFKq7IaLn3c8B2DjqE3D0QPue
ZPSMMFz7NTMVjfKpmkCp9V3ln87Cc/Cj0L66CKRuFnvefDCGLN4hULj3NAxQfkwm
9CsUH+p5d7usXgIB7tIovNEKw4hLiTQiTUd5bwok6iJ3EB79DHxxlY8nG6n5ukEr
9XryS1ADGmTUy7YifIdJKPyDLjEeP+xRMApUva67y7zaTk7iW6mETkBJ7WpQbCCL
fQaLlmU/SrBD8ViJBx19U6ofKIVJ+vVMoU9JNg4Ak5WZOfjw7aIPiZaaHU3Aj+w=
=IutN
-----END PGP SIGNATURE-----
Merge tag 'drm-intel-next-2017-12-01' of git://anongit.freedesktop.org/drm/drm-intel into drm-next
[airlied: fix conflict in intel_dsi.c]
drm-intel-next-2017-12-01:
- Init clock gate fix (Ville)
- Execlists event handling corrections (Chris, Michel)
- Improvements on GPU Cache invalidation and context switch (Chris)
- More perf OA changes (Lionel)
- More selftests improvements and fixes (Chris, Matthew)
- Clean-up on modules parameters (Chris)
- Clean-up around old ringbuffer submission and hw semaphore on old platforms (Chris)
- More Cannonlake stabilization effort (David, James)
- Display planes clean-up and improvements (Ville)
- New PMU interface for perf queries... (Tvrtko)
- ... and other subsequent PMU changes and fixes (Tvrtko, Chris)
- Remove success dmesg noise from rotation (Chris)
- New DMC for Kabylake (Anusha)
- Fixes around atomic commits (Daniel)
- GuC updates and fixes (Sagar, Michal, Chris)
- Couple gmbus/i2c fixes (Ville)
- Use exponential backoff for all our wait_for() (Chris)
- Fixes for i915/fbdev (Chris)
- Backlight fixes (Arnd)
- Updates on shrinker (Chris)
- Make Hotplug enable more robuts (Chris)
- Disable huge pages (TPH) on lack of a needed workaround (Joonas)
- New GuC images for SKL, KBL, BXT (Sagar)
- Add HW Workaround for Geminilake performance (Valtteri)
- Fixes for PPS timings (Imre)
- More IPS fixes (Maarten)
- Many fixes for Display Port on gen2-gen4 (Ville)
- Retry GPU reset making the recover from hang more robust (Chris)
* tag 'drm-intel-next-2017-12-01' of git://anongit.freedesktop.org/drm/drm-intel: (101 commits)
drm/i915: Update DRIVER_DATE to 20171201
drm/i915/cnl: Mask previous DDI - PLL mapping
drm/i915: Remove unsafe i915.enable_rc6
drm/i915: Sleep and retry a GPU reset if at first we don't succeed
drm/i915: Interlaced DP output doesn't work on VLV/CHV
drm/i915: Pass crtc state to intel_pipe_{enable,disable}()
drm/i915: Wait for pipe to start on i830 as well
drm/i915: Fix vblank timestamp/frame counter jumps on gen2
drm/i915: Fix deadlock in i830_disable_pipe()
drm/i915: Fix has_audio readout for DDI A
drm/i915: Don't add the "force audio" property to DP connectors that don't support audio
drm/i915: Disable DP audio for g4x
drm/i915/selftests: Wake the device before executing requests on the GPU
drm/i915: Set fake_vma.size as well as fake_vma.node.size for capture
drm/i915: Tidy up signed/unsigned comparison
drm/i915: Enable IPS with only sprite plane visible too, v4.
drm/i915: Make ips_enabled a property depending on whether IPS is enabled, v3.
drm/i915: Avoid PPS HW/SW state mismatch due to rounding
drm/i915: Skip switch-to-kernel-context on suspend when wedged
drm/i915/glk: Apply WaProgramL3SqcReg1DefaultForPerf for GLK too
...
regression fix for vc4 + rpm stable fix for analogix bridge
* tag 'drm-misc-fixes-2017-12-07' of git://anongit.freedesktop.org/drm/drm-misc:
drm/bridge: analogix dp: Fix runtime PM state in get_modes() callback
drm/vc4: Fix false positive WARN() backtrace on refcount_inc() usage
- Fix for fd.o bug #103997 CNL eDP + HDMI causing a machine hard hang (James)
- Fix to allow suspending with a wedged GPU to hopefully unwedge it (Chris)
- Fix for Gen2 vblank timestap/frame counter jumps (Ville)
- Revert of a W/A for enabling FBC on CNL/GLK for certain images
and sizes (Rodrigo)
- Lockdep fix for i915 userptr code (Chris)
gvt-fixes-2017-12-06
- Fix invalid hw reg read value for vGPU (Xiong)
- Fix qemu warning on PCI ROM bar missing (Changbin)
- Workaround preemption regression (Zhenyu)
* tag 'drm-intel-fixes-2017-12-07' of git://anongit.freedesktop.org/drm/drm-intel:
Revert "drm/i915: Display WA #1133 WaFbcSkipSegments:cnl, glk"
drm/i915: Call i915_gem_init_userptr() before taking struct_mutex
drm/i915/gvt: set max priority for gvt context
drm/i915/gvt: Don't mark vgpu context as inactive when preempted
drm/i915/gvt: Limit read hw reg to active vgpu
drm/i915/gvt: Export intel_gvt_render_mmio_to_ring_id()
drm/i915/gvt: Emulate PCI expansion ROM base address register
drm/i915/cnl: Mask previous DDI - PLL mapping
drm/i915: Fix vblank timestamp/frame counter jumps on gen2
drm/i915: Skip switch-to-kernel-context on suspend when wedged
- Add "panel orientation" property to DRM to indicate orientation of the
panel vs the device's casing (Hans de Goede)
Core Changes:
- misc doc and bug fixes
Driver Changes:
- sun4i: Many improvements to the DE driver like multi-plane support and
YUV formats (Jernej Skrabec)
-----BEGIN PGP SIGNATURE-----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=/Aku
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2017-12-07' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
UAPI Changes:
- Add "panel orientation" property to DRM to indicate orientation of the
panel vs the device's casing (Hans de Goede)
Core Changes:
- misc doc and bug fixes
Driver Changes:
- sun4i: Many improvements to the DE driver like multi-plane support and
YUV formats (Jernej Skrabec)
* tag 'drm-misc-next-2017-12-07' of git://anongit.freedesktop.org/drm/drm-misc: (50 commits)
drm/sun4i: Fix uninitialized variables in vi layer
drm/fb-helper: Fix potential NULL pointer dereference
gpu: drm: stm: Adopt SPDX identifiers
gpu: drm: sti: Adopt SPDX identifiers
drm/fsl-dcu: Use drm_mode_config_helper_suspend/resume()
drm/sun4i: Wire in DE2 YUV support
drm/sun4i: Expand DE2 scaler lib with YUV support
drm/sun4i: Add DE2 definitions for YUV formats
drm/sun4i: Add DE2 CSC library
drm/sun4i: Add CCSC property to DE2 configuration
drm/sun4i: Add support for HW scaling to DE2
drm/sun4i: Add scaler configuration to DE2 mixers
drm/sun4i: Add support for DE2 VI planes
drm/sun4i: Reorganize UI layer code in DE2
drm/sun4i: Add support for all HW supported DE2 RGB formats
drm/sun4i: Add multi plane support to DE2 driver
drm/sun4i: Move interlace related code in DE2
drm/sun4i: Move channel size related code in DE2
drm/sun4i: Move line width setting in DE2
drm/sun4i: Use values calculated by atomic check
...
Was missing before.
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This is the only part of the scheduler which must not be called from
different drivers. Move it to module init/exit so it is done a single
time when loading the scheduler.
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Tested-by: Dieter Nützel <Dieter@nuetzel-hh.de>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This moves and renames the AMDGPU scheduler to a common location in DRM
in order to facilitate re-use by other drivers. This is mostly a straight
forward rename with no code changes.
One notable exception is the function to_drm_sched_fence(), which is no
longer a inline header function to avoid the need to export the
drm_sched_fence_ops_scheduled and drm_sched_fence_ops_finished structures.
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Tested-by: Dieter Nützel <Dieter@nuetzel-hh.de>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
