[Why]
Cursor boosting is done via CNVC_CUR register which is DPP, not HUBP
Previous commit was implementing it in HUBP functions,
and also breaking diags tests.
[How]
1. Undo original commit as well as Eric's diags test fix, almost completely
2. Move programming to DPP and call via new dc_stream function
3. Also removing cur_rom_en from dpp_cursor_attributes and programming
as part of normal cursor attributes as it depends on cursor color format
Signed-off-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Hard-coded luts are needed since complex algorithms are used for
color and tone mapping. Add the headers for future use.
Signed-off-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To check rq pointer before adding entity into it.
That avoids NULL pointer access in some case.
v2: move the check to caller
Suggested-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Junwei Zhang <Jerry.Zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This change is to support MESA performace optimization.
Modify CS IOCTL to allow its input as command buffer and an array of
buffer handles to create a temporay bo list and then destroy it
when IOCTL completes.
This saves on calling for BO_LIST create and destry IOCTLs in MESA
and by this improves performance.
v2: Avoid inserting the temp list into idr struct.
v3:
Remove idr alloation from amdgpu_bo_list_create.
Remove useless argument from amdgpu_cs_parser_fini
Minor cosmetic stuff.
v4: Revert amdgpu_bo_list_destroy back to static
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit b87079ec7b.
SMU FW team ask to remove this version specific code.
Signed-off-by: Eric Huang <JinHuiEric.Huang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
return a uint32_t rather than an int to properly reflect
what the function does.
Reviewed-by: Rex Zhu <rezhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Split out the shared smumgr code for vega10 and 12
so we don't have duplicate code for both.
Reviewed-by: Rex Zhu <rezhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Commented out.
Reviewed-by: Rex Zhu <rezhu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rather than calculating it everytime we rebuild the toc
buffer, calculate it once initially and then just copy
the cached results to the vram buffer.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
use kaddr directly rather than secondary variable.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rather than using the index variable stored in vram. If
the device fails to come back online after a resume cycle,
reads from vram will return all 1s which will cause a
segfault. Based on a patch from Thomas Martitz <kugel@rockbox.org>.
This avoids the segfault, but we still need to sort out
why the GPU does not come back online after a resume.
Bug: https://bugs.freedesktop.org/show_bug.cgi?id=105760
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use the PP_STATE_SUPPORT_* rather than AMD_CG_SUPPORT_*
when communicating with the SMU.
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Currently we do not turn off autocal when scaling is in bypass.
In case vbios enalbes auto scale and our first mode set is a non-scaled
mode we have autocal on causing screen corruption.
[how]
moves turning autocal off to be first thing done during scaler setup
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why] Prevent unexpected color shows if DalMpVisualConfirm enable.
[How] Zero out color configuration data for DalMpVisualConfirm when initiating.
Signed-off-by: Hugo Hu <hugo.hu@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Tony Cheng <tony.cheng@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
DV updated their dml with an option to use max vstartup,
this updates dc dml with the same option
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The previous code could allow through attempts to enable more streams
than there are timing generators, in designs where the number of pipes
is greater than the number of timing generators.
[How]
Compare the new stream count to the resource pool's timing generator
count, instead of its pipe count. Also correct a typo in the error
message.
Signed-off-by: Ken Chalmers <ken.chalmers@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
when hw team does phy parameters tuning, there is need to force dp
link rate or lane count grater than the values from dp receiver to
check dp tx. current debufs limit link rate, lane count no more
than rx caps.
[How] remove force settings less than rx caps check
v2: Fix typo in title
Signed-off-by: Hersen Wu <hersenxs.wu@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: David Francis <David.Francis@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Regamma/CTM tests require CRC support
[How]
The CRC registers that were used in DCE exist under different
names in DCN. The code was copied from DCE (in
dc/dce110/dce110_timing_generator.c) into DCN, and changed to
use the DCN register access helper functions.
Signed-off-by: David Francis <David.Francis@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
PNP cause bsod regression fix
[HOW]
Add NULL check
Signed-off-by: Yue Hin Lau <Yuehin.Lau@amd.com>
Reviewed-by: Hugo Hu <Hugo.Hu@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Add a switch statement to translate pp's powerlevel enum
to dc powerlevel statement enum
[how]
Add a translator function
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Reviewed-by: Sun peng Li <Sunpeng.Li@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
"DalEnableHDMI20" set to 0, disallow HDMI YCbCr420 and pixel clock > 340Mhz
Default is enabled.
Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
get_channel_status() can return 0 in returned_bytes, and report a
successful operation result. This is because it prunes the first status
byte out. This was preventing read_channel_reply() from being called
(due to the faulty condition), and consequently preventing the AUX
reply status from being set.
[How]
Fix the conditional so that it accounts for when get_channel_status()
returns 0 bytes read.
[Fixes]
Fixes possible edid read failures during S3 resume, where we are now
relying on DRM's DP AUX handling. This was an regression introduced by:
Author: Harry Wentland <harry.wentland@amd.com>
drm/amd/display: Return aux replies directly to DRM
Signed-off-by: Leo (Sunpeng) Li <sunpeng.li@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
There is no point in keeping the AUX reply value in the raw format as
returned from reading the AUX_SW_DATA register.
[How]
Shift it within read_channel_reply(), where the register is read, before
returning it.
Signed-off-by: Leo (Sunpeng) Li <sunpeng.li@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Some monitors mark 4K@60 capable HDMI port only have 300MHz TMDS
maximum, but the edid includes 4K@60 mode in cea extension block.
[How]
To enable 4K@60, need to limit BW by allowing YCbCr420 ONLY mode.
Add YCbCr420 only support for monitors that do not fully support
HDMI2.0, e.g., ASUS PA328. The YCbCr420 only support applies to
DCN, DCE112 or higher.
Signed-off-by: Jerry (Fangzhi) Zuo <Jerry.Zuo@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
bug fix: phy test PLTAT is special 80bit test pattern. The 80bit
data should be hard coded within driver so that user does not
need input the deata. previous driver does not have hard coded
80 bits pattern data for PLTPAT. Other than this PLTPAT, user
has to input 80 bits pattern data. In case user input less than
10 bytes data, un-input data byte will be filled by 0x00.
Signed-off-by: Hersen Wu <hersenxs.wu@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Reviewed-by: Wesley Chalmers <Wesley.Chalmers@amd.com>
Reviewed-by: Duke Du <Duke.Du@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
GCC 4.9 reports a 'missing braces around initializer' error. This is a
bug, documented here:
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=53119
Fix it by adding another brace.
Signed-off-by: Leo (Sunpeng) Li <sunpeng.li@amd.com>
Reviewed-by: Mikita Lipski <Mikita.Lipski@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
function: get current DP PHY settings: voltage swing, pre-emphasis,
post-cursor2 (defined by VESA DP specification)
valid values: voltage swing: 0,1,2,3 pre-emphasis : 0,1,2,3
post cursor2 : 0,1,2,3
debugfs file phy_setings is located at /sys/kernel/debug/dri/0/DP-x
there will be directories, like DP-1, DP-2,DP-3, etc. for DP display
--- to figure out which DP-x is the display for DP to be check,
cd DP-x
ls -ll
There should be debugfs file, like link_settings, phy_settings.
cat link_settings
from lane_count, link_rate to figure which DP-x is for display to be
worked on
--- to get current DP PHY settings,
cat phy_settings
--- to change DP PHY settings,
echo <voltage_swing> <pre-emphasis> <post_cursor2> > phy_settings
for examle, to change voltage swing to 2, pre-emphasis to 3,
post_cursor2 to 0,
echo 2 3 0 > phy_settings
--- to check if change be applied, get current phy settings by
cat phy_settings
--- in case invalid values are set by user, like
echo 1 4 0 > phy_settings
HW will NOT be programmed by these settings.
cat phy_settings will show the previous valid settings.
Signed-off-by: Hersen Wu <hersenxs.wu@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Reviewed-by: Hersen Wu <hersenxs.wu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
In eDP spec, the min duration in LCDVDD on-off-on sequence should be
500ms, some BOE panels need 700ms to pass.
[HOW]
Add patch to wait more time when eDP power on.
Signed-off-by: Hugo Hu <hugo.hu@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
set PHY layer or Link layer test pattern
PHY test pattern is used for PHY SI check.
Link layer test will not affect PHY SI.
- normal video mode
0 = DP_TEST_PATTERN_VIDEO_MODE
- PHY test pattern supported
1 = DP_TEST_PATTERN_D102
2 = DP_TEST_PATTERN_SYMBOL_ERROR
3 = DP_TEST_PATTERN_PRBS7
4 = DP_TEST_PATTERN_80BIT_CUSTOM
5 = DP_TEST_PATTERN_CP2520_1
6 = DP_TEST_PATTERN_CP2520_2 = DP_TEST_PATTERN_HBR2_COMPLIANCE_EYE
7 = DP_TEST_PATTERN_CP2520_3
- DP PHY Link Training Patterns
8 = DP_TEST_PATTERN_TRAINING_PATTERN1
9 = DP_TEST_PATTERN_TRAINING_PATTERN2
0xa = DP_TEST_PATTERN_TRAINING_PATTERN3
0xb = DP_TEST_PATTERN_TRAINING_PATTERN4
- DP Link Layer Test pattern
0xc = DP_TEST_PATTERN_COLOR_SQUARES
0xd = DP_TEST_PATTERN_COLOR_SQUARES_CEA
0xe = DP_TEST_PATTERN_VERTICAL_BARS
0xf = DP_TEST_PATTERN_HORIZONTAL_BARS
0x10= DP_TEST_PATTERN_COLOR_RAMP
debugfs phy_test_pattern is located at /syskernel/debug/dri/0/DP-x
--- set test pattern
echo <test pattern #> > test_pattern
- custom test pattern
If test pattern # is not supported, NO HW programming will be done
for DP_TEST_PATTERN_80BIT_CUSTOM, it needs extra 10 bytes of data
for the user pattern. input 10 bytes data are separated by space
echo 0x4 0x11 0x22 0x33 0x44 0x55 0x66 0x77 0x88 0x99 0xaa >
test_pattern
--- reset test pattern
echo 0 > test_pattern
--- HPD detection is disabled when set PHY test pattern
when PHY test pattern (pattern # within [1,7]) is set, HPD pin of
HW ASIC is disable. User could unplug DP display from DP connected
and plug scope to check test pattern PHY SI.
If there is need unplug scope and plug DP display back, do steps
below:
echo 0 > phy_test_pattern
unplug scope
plug DP display.
"echo 0 > phy_test_pattern" will re-enable HPD pin again so that
video sw driver could detect "unplug scope" and "plug DP display"
Signed-off-by: Hersen Wu <hersenxs.wu@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
- define new dpcd address in drm
- implement new members in dpcd_caps to store values read from new dpcd address
Signed-off-by: Alvin lee <alvin.lee3@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
- Removed dal/dm/dc loggers from linux, switched to kernel prints
- Modified functions that used these directly to use macros
- dc_logger support is completely dropped from Linux
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Currently we still go through DC code that does error checking, retries,
etc. There's no need for that since DRM already does that for us. This
simplifies the code a bit and makes it easier to debug.
This also ensures we correctly tell DRM how many bytes have actually
been read, as we should. This allows DRM to correctly read the EDID on
the Chamelium DP port.
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
DRM's DP helpers take care of dealing with the error code for us. In
order not to step on each other's toes we'll need to be able to simply
read auch channel replies without further logic based on return values.
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Sun peng Li <Sunpeng.Li@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Access to GPIO needs to be serialized. Aux transactions are already
serialized in DRM but we also need to serialize access to the GPIO pin
for purposes of DP dongle detection.
Call is_dp_sink_present through DM so we can lock correctly. This
follows the same pattern used for DPCD transactions.
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
