Several definitions and variables are unused.
Some variables are set but further unused.
Remove them.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Tested-by: Michael Schmitz <schmitzmic@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
The pixclock values in the vga and vga70 modes are wrong, as they should
use the 25.175 MHz clock instead of the 32 MHz clock.
Swap the left and right margins to match f25.{right,left} (struct
pixel_clock declares them in a different order), and update the hsync
lengths to match what the driver programs by default.
Correct the (wrong) floating-point vrefresh value for the vga mode.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Tested-by: Michael Schmitz <schmitzmic@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
The vertical refresh rate for the TT High video mode (1280x960) is
wrong. Fortunately this field is not really used.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Tested-by: Michael Schmitz <schmitzmic@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Arbitrary pointers can be passed to functions accepting "void *" without
casting.
Remove the casts, as they make it impossible to validate types.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Tested-by: Michael Schmitz <schmitzmic@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
There is no need to cast fb_info.par to "struct atafb_par *", as the
former has type "void *".
Remove the casts, as they make it impossible to validate types.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Tested-by: Michael Schmitz <schmitzmic@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
The red, green, and blue color values are 16-bit, while the external
graphics hardware registers are 8-bit.
Add the missing conversion from 16-bit to 8-bit.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Tested-by: Michael Schmitz <schmitzmic@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Currently, the "inverse" option does not do anything, as it just sets a
flag, which is further unused.
Fix this by calling fb_invert_cmaps() instead, like other drivers do.
As this only affects the console colormap, this does not affect X.
Update the documentation to match the actual behavior.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Tested-by: Michael Schmitz <schmitzmic@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Vertical wrap is not supported (fb_fix_screeninfo.ywrapstep = 0), hence
there is no point in setting the FB_VMODE_YWRAP flag in video modes.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Tested-by: Michael Schmitz <schmitzmic@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
The fb_pan_display() function in the core already takes care of
validating the panning parameters before calling the driver's
.fb_pan_display() callback, and of updating the panning state
afterwards, so there is no need to repeat that in the driver.
Remove the duplicate code.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Tested-by: Michael Schmitz <schmitzmic@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
The various *fb_setup() and *fb_init() functions are only used locally,
so they should be static. Most of them do not need forward
declarations, so remove these where appropriate.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Helge Deller <deller@gmx.de>
cirrusfb_zorro_unregister() is only used locally, hence make it static.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Helge Deller <deller@gmx.de>
sa1100fb_setup() has been unused since the beginning of Linux git
history.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Helge Deller <deller@gmx.de>
The fb_pan_display() function in the core already takes care of
validating most panning parameters before calling the driver's
.fb_pan_display() callback, and of updating the panning state
afterwards, so there is no need to repeat that in the driver.
Remove the duplicate code.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Helge Deller <deller@gmx.de>
Pull intel drm build fix from Rodrigo Vivi:
"Our 'dim' flow has a problem with fixes of fixes getting missed. We
need to take a look on that later.
Meanwhile, please allow me to quickly propagate this fix for the
32-bit build issue here upstream"
* tag 'drm-intel-fixes-2022-07-17' of git://anongit.freedesktop.org/drm/drm-intel:
drm/i915/ttm: fix 32b build
Pull perf tools fixes from Arnaldo Carvalho de Melo:
- Fix SIGSEGV when processing syscall args in perf.data files in 'perf
trace'
- Sync kvm, msr-index and cpufeatures headers with the kernel sources
- Fix 'convert perf time to TSC' 'perf test':
- No need to open events twice
- Fix finding correct event on hybrid systems
* tag 'perf-tools-fixes-for-v5.19-2022-07-17' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
perf trace: Fix SIGSEGV when processing syscall args
perf tests: Fix Convert perf time to TSC test for hybrid
perf tests: Stop Convert perf time to TSC test opening events twice
tools arch x86: Sync the msr-index.h copy with the kernel sources
tools headers cpufeatures: Sync with the kernel sources
tools headers UAPI: Sync linux/kvm.h with the kernel sources
Pull perf fix from Borislav Petkov:
- A single data race fix on the perf event cleanup path to avoid
endless loops due to insufficient locking
* tag 'perf_urgent_for_v5.19_rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/core: Fix data race between perf_event_set_output() and perf_mmap_close()
Pull x86 fixes from Borislav Petkov:
- Improve the check whether the kernel supports WP mappings so that it
can accomodate a XenPV guest due to how the latter is setting up the
PAT machinery
- Now that the retbleed nightmare is public, here's the first round of
fallout fixes:
* Fix a build failure on 32-bit due to missing include
* Remove an untraining point in espfix64 return path
* other small cleanups
* tag 'x86_urgent_for_v5.19_rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/bugs: Remove apostrophe typo
um: Add missing apply_returns()
x86/entry: Remove UNTRAIN_RET from native_irq_return_ldt
x86/bugs: Mark retbleed_strings static
x86/pat: Fix x86_has_pat_wp()
x86/asm/32: Fix ANNOTATE_UNRET_SAFE use on 32-bit
Pull gpio fix from Bartosz Golaszewski:
- fix a configfs attribute of the gpio-sim module
* tag 'gpio-fixes-for-v5.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: sim: fix the chip_name configfs item
Pull input fixes from Dmitry Torokhov:
- fix Goodix driver to properly behave on the Aya Neo Next
- some more sanity checks in usbtouchscreen driver
- a tweak in wm97xx driver in preparation for remove() to return void
- a clarification in input core regarding units of measurement for
resolution on touch events.
* tag 'input-for-v5.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: document the units for resolution of size axes
Input: goodix - call acpi_device_fix_up_power() in some cases
Input: wm97xx - make .remove() obviously always return 0
Input: usbtouchscreen - add driver_info sanity check
Pull power supply fixes from Sebastian Reichel:
- power-supply core temperature interpolation regression fix for
incorrect boundaries
- ab8500 needs to destroy its work queues in error paths
- Fix old DT refcount leak in arm-versatile
* tag 'for-v5.19-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply:
power: supply: core: Fix boundary conditions in interpolation
power/reset: arm-versatile: Fix refcount leak in versatile_reboot_probe
power: supply: ab8500_fg: add missing destroy_workqueue in ab8500_fg_probe
On powerpc, 'perf trace' is crashing with a SIGSEGV when trying to
process a perf.data file created with 'perf trace record -p':
#0 0x00000001225b8988 in syscall_arg__scnprintf_augmented_string <snip> at builtin-trace.c:1492
#1 syscall_arg__scnprintf_filename <snip> at builtin-trace.c:1492
#2 syscall_arg__scnprintf_filename <snip> at builtin-trace.c:1486
#3 0x00000001225bdd9c in syscall_arg_fmt__scnprintf_val <snip> at builtin-trace.c:1973
#4 syscall__scnprintf_args <snip> at builtin-trace.c:2041
#5 0x00000001225bff04 in trace__sys_enter <snip> at builtin-trace.c:2319
That points to the below code in tools/perf/builtin-trace.c:
/*
* If this is raw_syscalls.sys_enter, then it always comes with the 6 possible
* arguments, even if the syscall being handled, say "openat", uses only 4 arguments
* this breaks syscall__augmented_args() check for augmented args, as we calculate
* syscall->args_size using each syscalls:sys_enter_NAME tracefs format file,
* so when handling, say the openat syscall, we end up getting 6 args for the
* raw_syscalls:sys_enter event, when we expected just 4, we end up mistakenly
* thinking that the extra 2 u64 args are the augmented filename, so just check
* here and avoid using augmented syscalls when the evsel is the raw_syscalls one.
*/
if (evsel != trace->syscalls.events.sys_enter)
augmented_args = syscall__augmented_args(sc, sample, &augmented_args_size, trace->raw_augmented_syscalls_args_size);
As the comment points out, we should not be trying to augment the args
for raw_syscalls. However, when processing a perf.data file, we are not
initializing those properly. Fix the same.
Reported-by: Claudio Carvalho <cclaudio@linux.ibm.com>
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lore.kernel.org/lkml/20220707090900.572584-1-naveen.n.rao@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To pick up the changes from these csets:
4ad3278df6 ("x86/speculation: Disable RRSBA behavior")
d7caac991f ("x86/cpu/amd: Add Spectral Chicken")
That cause no changes to tooling:
$ tools/perf/trace/beauty/tracepoints/x86_msr.sh > before
$ cp arch/x86/include/asm/msr-index.h tools/arch/x86/include/asm/msr-index.h
$ tools/perf/trace/beauty/tracepoints/x86_msr.sh > after
$ diff -u before after
$
Just silences this perf build warning:
Warning: Kernel ABI header at 'tools/arch/x86/include/asm/msr-index.h' differs from latest version at 'arch/x86/include/asm/msr-index.h'
diff -u tools/arch/x86/include/asm/msr-index.h arch/x86/include/asm/msr-index.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/lkml/YtQTm9wsB3hxQWvy@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To pick the changes from:
f43b9876e8 ("x86/retbleed: Add fine grained Kconfig knobs")
a149180fbc ("x86: Add magic AMD return-thunk")
15e67227c4 ("x86: Undo return-thunk damage")
369ae6ffc4 ("x86/retpoline: Cleanup some #ifdefery")
4ad3278df6 x86/speculation: Disable RRSBA behavior
26aae8ccbc x86/cpu/amd: Enumerate BTC_NO
9756bba284 x86/speculation: Fill RSB on vmexit for IBRS
3ebc170068 x86/bugs: Add retbleed=ibpb
2dbb887e87 x86/entry: Add kernel IBRS implementation
6b80b59b35 x86/bugs: Report AMD retbleed vulnerability
a149180fbc x86: Add magic AMD return-thunk
15e67227c4 x86: Undo return-thunk damage
a883d624ae x86/cpufeatures: Move RETPOLINE flags to word 11
5180218615 x86/speculation/mmio: Enumerate Processor MMIO Stale Data bug
This only causes these perf files to be rebuilt:
CC /tmp/build/perf/bench/mem-memcpy-x86-64-asm.o
CC /tmp/build/perf/bench/mem-memset-x86-64-asm.o
And addresses this perf build warning:
Warning: Kernel ABI header at 'tools/arch/x86/include/asm/cpufeatures.h' differs from latest version at 'arch/x86/include/asm/cpufeatures.h'
diff -u tools/arch/x86/include/asm/cpufeatures.h arch/x86/include/asm/cpufeatures.h
Warning: Kernel ABI header at 'tools/arch/x86/include/asm/disabled-features.h' differs from latest version at 'arch/x86/include/asm/disabled-features.h'
diff -u tools/arch/x86/include/asm/disabled-features.h arch/x86/include/asm/disabled-features.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org
Link: https://lore.kernel.org/lkml/YtQM40VmiLTkPND2@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To pick the changes in:
1b870fa557 ("kvm: stats: tell userspace which values are boolean")
That just rebuilds perf, as these patches don't add any new KVM ioctl to
be harvested for the the 'perf trace' ioctl syscall argument
beautifiers.
This is also by now used by tools/testing/selftests/kvm/, a simple test
build succeeded.
This silences this perf build warning:
Warning: Kernel ABI header at 'tools/include/uapi/linux/kvm.h' differs from latest version at 'include/uapi/linux/kvm.h'
diff -u tools/include/uapi/linux/kvm.h include/uapi/linux/kvm.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Link: http://lore.kernel.org/lkml/YtQLDvQrBhJNl3n5@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Pull btrfs reverts from David Sterba:
"Due to a recent report [1] we need to revert the radix tree to xarray
conversion patches.
There's a problem with sleeping under spinlock, when xa_insert could
allocate memory under pressure. We use GFP_NOFS so this is a real
problem that we unfortunately did not discover during review.
I'm sorry to do such change at rc6 time but the revert is IMO the
safer option, there are patches to use mutex instead of the spin locks
but that would need more testing. The revert branch has been tested on
a few setups, all seem ok.
The conversion to xarray will be revisited in the future"
Link: https://lore.kernel.org/linux-btrfs/cover.1657097693.git.fdmanana@suse.com/ [1]
* tag 'for-5.19-rc7-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
Revert "btrfs: turn delayed_nodes_tree into an XArray"
Revert "btrfs: turn name_cache radix tree into XArray in send_ctx"
Revert "btrfs: turn fs_info member buffer_radix into XArray"
Revert "btrfs: turn fs_roots_radix in btrfs_fs_info into an XArray"
Pull SCSI fixes from James Bottomley:
"Six small and reasonably obvious fixes, all in drivers"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: pm80xx: Set stopped phy's linkrate to Disabled
scsi: pm80xx: Fix 'Unknown' max/min linkrate
scsi: ufs: core: Fix missing clk change notification on host reset
scsi: ufs: core: Drop loglevel of WriteBoost message
scsi: megaraid: Clear READ queue map's nr_queues
scsi: target: Fix WRITE_SAME No Data Buffer crash
Pull block fixes from Jens Axboe:
"Two NVMe fixes, and a regression fix for the core block layer from
this merge window"
* tag 'block-5.19-2022-07-15' of git://git.kernel.dk/linux-block:
block: fix missing blkcg_bio_issue_init
nvme: fix block device naming collision
nvme-pci: fix freeze accounting for error handling
Pull USB driver fixes from Greg KH:
"Here are some small USB driver fixes and new device ids for 5.19-rc7.
They include:
- new usb-serial driver ids
- typec uevent fix
- uvc gadget driver fix
- dwc3 driver fixes
- ehci-fsl driver fix
All of these have been in linux-next for a while with no reported
issues"
* tag 'usb-5.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
USB: serial: ftdi_sio: add Belimo device ids
drivers/usb/host/ehci-fsl: Fix interrupt setup in host mode.
usb: gadget: uvc: fix changing interface name via configfs
usb: typec: add missing uevent when partner support PD
usb: dwc3-am62: remove unnecesary clk_put()
usb: dwc3: gadget: Fix event pending check
Pull tty and serial driver fixes from Greg KH:
"Here are some TTY and Serial driver fixes for 5.19-rc7. They resolve a
number of reported problems including:
- longtime bug in pty_write() that has been reported in the past.
- 8250 driver fixes
- new serial device ids
- vt overlapping data copy bugfix
- other tiny serial driver bugfixes
All of these have been in linux-next for a while with no reported
problems"
* tag 'tty-5.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
tty: use new tty_insert_flip_string_and_push_buffer() in pty_write()
tty: extract tty_flip_buffer_commit() from tty_flip_buffer_push()
serial: 8250: dw: Fix the macro RZN1_UART_xDMACR_8_WORD_BURST
vt: fix memory overlapping when deleting chars in the buffer
serial: mvebu-uart: correctly report configured baudrate value
serial: 8250: Fix PM usage_count for console handover
serial: 8250: fix return error code in serial8250_request_std_resource()
serial: stm32: Clear prev values before setting RTS delays
tty: Add N_CAN327 line discipline ID for ELM327 based CAN driver
serial: 8250: Fix __stop_tx() & DMA Tx restart races
serial: pl011: UPSTAT_AUTORTS requires .throttle/unthrottle
tty: serial: samsung_tty: set dma burst_size to 1
serial: 8250: dw: enable using pdata with ACPI
Pull s390 fixes from Alexander Gordeev:
- Fix building of out-of-tree kernel modules without a pre-built kernel
in case CONFIG_EXPOLINE_EXTERN=y.
- Fix a reference counting error that could prevent unloading of zcrypt
modules.
* tag 's390-5.19-6' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/ap: fix error handling in __verify_queue_reservations()
s390/nospec: remove unneeded header includes
s390/nospec: build expoline.o for modules_prepare target
Pull power management fix from Rafael Wysocki
"Fix recent regression in the cpufreq mediatek driver related to
incorrect handling of regulator_get_optional() return value
(AngeloGioacchino Del Regno)"
* tag 'pm-5.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: mediatek: Handle sram regulator probe deferral
Pull ACPI fix from Rafael Wysocki:
"Fix more fallout from recent changes of the ACPI CPPC handling on AMD
platforms (Mario Limonciello)"
* tag 'acpi-5.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: CPPC: Fix enabling CPPC on AMD systems with shared memory
Pull printk fix from Petr Mladek:
- Make pr_flush() fast when consoles are suspended.
* tag 'printk-for-5.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
printk: do not wait for consoles when suspended
Currently the jitter mechanism will require two timer ticks per
iteration, and it requires N iterations per bit. This N is determined
with a small measurement, and if it's too big, it won't waste time with
jitter entropy because it'd take too long or not have sufficient entropy
anyway.
With the current max N of 32, there are large timeouts on systems with a
small CONFIG_HZ. Rather than set that maximum to 32, instead choose a
factor of CONFIG_HZ. In this case, 1/30 seems to yield sane values for
different configurations of CONFIG_HZ.
Reported-by: Vladimir Murzin <vladimir.murzin@arm.com>
Fixes: 78c768e619 ("random: vary jitter iterations based on cycle counter speed")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Tested-by: Vladimir Murzin <vladimir.murzin@arm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Remove a superfluous ' in the mitigation string.
Fixes: e8ec1b6e08 ("x86/bugs: Enable STIBP for JMP2RET")
Signed-off-by: Kim Phillips <kim.phillips@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Pull RISC-V fixes from Palmer Dabbelt:
- A fix to avoid printing a warning when modules do not exercise any
errata-dependent behavior and the SiFive errata are enabled.
- A fix to the Microchip PFSOC to attach the L2 cache to the CPU nodes.
* tag 'riscv-for-linus-5.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: don't warn for sifive erratas in modules
riscv: dts: microchip: hook up the mpfs' l2cache
Pull KVM fixes from Paolo Bonzini:
"RISC-V:
- Fix missing PAGE_PFN_MASK
- Fix SRCU deadlock caused by kvm_riscv_check_vcpu_requests()
x86:
- Fix for nested virtualization when TSC scaling is active
- Estimate the size of fastcc subroutines conservatively, avoiding
disastrous underestimation when return thunks are enabled
- Avoid possible use of uninitialized fields of 'struct
kvm_lapic_irq'
Generic:
- Mark as such the boolean values available from the statistics file
descriptors
- Clarify statistics documentation"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: emulate: do not adjust size of fastop and setcc subroutines
KVM: x86: Fully initialize 'struct kvm_lapic_irq' in kvm_pv_kick_cpu_op()
Documentation: kvm: clarify histogram units
kvm: stats: tell userspace which values are boolean
x86/kvm: fix FASTOP_SIZE when return thunks are enabled
KVM: nVMX: Always enable TSC scaling for L2 when it was enabled for L1
RISC-V: KVM: Fix SRCU deadlock caused by kvm_riscv_check_vcpu_requests()
riscv: Fix missing PAGE_PFN_MASK
Pull ceph fix from Ilya Dryomov:
"A folio locking fixup that Xiubo and David cooperated on, marked for
stable. Most of it is in netfs but I picked it up into ceph tree on
agreement with David"
* tag 'ceph-for-5.19-rc7' of https://github.com/ceph/ceph-client:
netfs: do not unlock and put the folio twice
Pull spi fixes from Mark Brown:
"A few driver specific fixes, none especially remarkable, plus a
MAINTAINERS file update due to the previous maintainer for the NXP
FSPI driver having left the company"
* tag 'spi-fix-v5.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: cadence-quadspi: Remove spi_master_put() in probe failure path
MAINTAINERS: change the NXP FSPI driver maintainer.
spi: amd: Limit max transfer and message size
spi: aspeed: Fix division by zero
spi: aspeed: Add dev_dbg() to dump the spi-mem direct mapping descriptor
Pull ARM SoC fixes from Arnd Bergmann:
"Most of the contents are bugfixes for the devicetree files:
- A Qualcomm MSM8974 pin controller regression, caused by a cleanup
patch that gets partially reverted here.
- Missing properties for Broadcom BCM49xx to fix timer detection and
SMP boot.
- Fix touchscreen pinctrl for imx6ull-colibri board
- Multiple fixes for Rockchip rk3399 based machines including the vdu
clock-rate fix, otg port fix on Quartz64-A and ethernet on
Quartz64-B
- Fixes for misspelled DT contents causing minor problems on
imx6qdl-ts7970m, orangepi-zero, sama5d2, kontron-kswitch-d10, and
ls1028a
And a couple of changes elsewhere:
- Fix binding for Allwinner D1 display pipeline
- Trivial code fixes to the TEE and reset controller driver
subsystems and the rockchip platform code.
- Multiple updates to the MAINTAINERS files, marking the Palm Treo
support as orphaned, and fixing some entries for added or changed
file names"
* tag 'soc-fixes-5.19-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (21 commits)
arm64: dts: broadcom: bcm4908: Fix cpu node for smp boot
arm64: dts: broadcom: bcm4908: Fix timer node for BCM4906 SoC
ARM: dts: sunxi: Fix SPI NOR campatible on Orange Pi Zero
ARM: dts: at91: sama5d2: Fix typo in i2s1 node
tee: tee_get_drvdata(): fix description of return value
optee: Remove duplicate 'of' in two places.
ARM: dts: kswitch-d10: use open drain mode for coma-mode pins
ARM: dts: colibri-imx6ull: fix snvs pinmux group
optee: smc_abi.c: fix wrong pointer passed to IS_ERR/PTR_ERR()
MAINTAINERS: add polarfire rng, pci and clock drivers
MAINTAINERS: mark ARM/PALM TREO SUPPORT orphan
ARM: dts: imx6qdl-ts7970: Fix ngpio typo and count
arm64: dts: ls1028a: Update SFP node to include clock
dt-bindings: display: sun4i: Fix D1 pipeline count
ARM: dts: qcom: msm8974: re-add missing pinctrl
reset: Fix devm bulk optional exclusive control getter
MAINTAINERS: rectify entry for SYNOPSYS AXS10x RESET CONTROLLER DRIVER
ARM: rockchip: Add missing of_node_put() in rockchip_suspend_init()
arm64: dts: rockchip: Assign RK3399 VDU clock rate
arm64: dts: rockchip: Fix Quartz64-A dwc3 otg port behavior
...
This reverts commit 253bf57555.
Revert the xarray conversion, there's a problem with potential
sleep-inside-spinlock [1] when calling xa_insert that triggers GFP_NOFS
allocation. The radix tree used the preloading mechanism to avoid
sleeping but this is not available in xarray.
Conversion from spin lock to mutex is possible but at time of rc6 is
riskier than a clean revert.
[1] https://lore.kernel.org/linux-btrfs/cover.1657097693.git.fdmanana@suse.com/
Reported-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This reverts commit 4076942021.
Revert the xarray conversion, there's a problem with potential
sleep-inside-spinlock [1] when calling xa_insert that triggers GFP_NOFS
allocation. The radix tree used the preloading mechanism to avoid
sleeping but this is not available in xarray.
Conversion from spin lock to mutex is possible but at time of rc6 is
riskier than a clean revert.
[1] https://lore.kernel.org/linux-btrfs/cover.1657097693.git.fdmanana@suse.com/
Reported-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This reverts commit 8ee922689d.
Revert the xarray conversion, there's a problem with potential
sleep-inside-spinlock [1] when calling xa_insert that triggers GFP_NOFS
allocation. The radix tree used the preloading mechanism to avoid
sleeping but this is not available in xarray.
Conversion from spin lock to mutex is possible but at time of rc6 is
riskier than a clean revert.
[1] https://lore.kernel.org/linux-btrfs/cover.1657097693.git.fdmanana@suse.com/
Reported-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This reverts commit 48b36a602a.
Revert the xarray conversion, there's a problem with potential
sleep-inside-spinlock [1] when calling xa_insert that triggers GFP_NOFS
allocation. The radix tree used the preloading mechanism to avoid
sleeping but this is not available in xarray.
Conversion from spin lock to mutex is possible but at time of rc6 is
riskier than a clean revert.
[1] https://lore.kernel.org/linux-btrfs/cover.1657097693.git.fdmanana@suse.com/
Reported-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Pull x86 platform driver fixes from Hans de Goede:
"Highlights:
- Fix brightness key events getting reported twice on some Dells.
Regression caused by recent Panasonic hotkey fixes
- Fix poweroff no longer working on some devices regression caused
by recent poweroff handler rework
- Mark new (in 5.19) Intel IFS driver as broken, because of some
issues surrounding the userspace (sysfs) API which need to be
cleared up
- Some hardware-id / quirk additions"
* tag 'platform-drivers-x86-v5.19-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
ACPI: video: Fix acpi_video_handles_brightness_key_presses()
platform/x86: intel_atomisp2_led: Also turn off the always-on camera LED on the Asus T100TAF
platform/x86/intel/ifs: Mark as BROKEN
platform/x86: asus-wmi: Add key mappings
efi: Fix efi_power_off() not being run before acpi_power_off() when necessary
platform/x86: x86-android-tablets: Fix Lenovo Yoga Tablet 2 830/1050 poweroff again
platform/x86: gigabyte-wmi: add support for B660I AORUS PRO DDR4
platform/x86/amd/pmc: Add new platform support
platform/x86/amd/pmc: Add new acpi id for PMC controller
