Add four functions to register clk_hw based on the fw_name field in
clk_parent_data, ie the value in the DT property `clock-names`.
There are variants for devm or not and passing an accuracy or not
passing one:
- clk_hw_register_fixed_factor_fwname
- clk_hw_register_fixed_factor_with_accuracy_fwname
- devm_clk_hw_register_fixed_factor_fwname
- devm_clk_hw_register_fixed_factor_with_accuracy_fwname
The `struct clk_parent_data` init is extracted from
__clk_hw_register_fixed_factor to each calling function. It is required
to allow each function to pass whatever field they want, not only index.
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Link: https://lore.kernel.org/r/20240221-mbly-clk-v7-2-31d4ce3630c3@bootlin.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Fixed factor clock reports the parent clock accuracy. Add flags and acc
fields to `struct clk_fixed_factor` to support setting a fixed
accuracy. The default if no flag is set is not changed: use the parent
clock accuracy.
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Link: https://lore.kernel.org/r/20240221-mbly-clk-v7-1-31d4ce3630c3@bootlin.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Most of clocks and their parents are defined in contiguous range,
But in few cases, there is gap in clock numbers[0].
Driver assumes clocks to be in contiguous range, and add their clock
ids incrementally.
New firmware started returning error while calling get_freq and is_on
API for non-available clock ids.
In this fix, driver checks and adds only valid clock ids.
[0] https://software-dl.ti.com/tisci/esd/latest/5_soc_doc/j7200/clocks.html
Section Clocks for NAVSS0_CPTS_0 Device, clock id 12-15 not present.
Fixes: 3c13933c60 ("clk: keystone: sci-clk: add support for dynamically probing clocks")
Signed-off-by: Udit Kumar <u-kumar1@ti.com>
Link: https://lore.kernel.org/r/20240213082640.457316-1-u-kumar1@ti.com
Reviewed-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Correct the function name in the kernel-doc comment to match the
actual function name to avoid a kernel-doc warning:
drivers/clk/keystone/sci-clk.c:287: warning: expecting prototype for _sci_clk_get(). Prototype was for _sci_clk_build() instead
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Nishanth Menon <nm@ti.com>
Cc: Tero Kristo <kristo@kernel.org>
Cc: Santosh Shilimkar <ssantosh@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: linux-clk@vger.kernel.org
Link: https://lore.kernel.org/r/20240115001255.4124-1-rdunlap@infradead.org
Reviewed-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
In order to calculate correct FSI bus clocks, the FSI clock must
correctly calculate the rate from the parent (APLL / 4).
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Link: https://lore.kernel.org/r/20240215220759.976998-3-eajames@linux.ibm.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The variable 'rate' being assigned a value that is never read, the
assignment is redundant and can be removed.
Cleans up clang scan build warning:
drivers/clk/clk-cdce925.c:104:3: warning: Value stored to 'rate' is
never read [deadcode.DeadStores]
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20240216140132.2108665-1-colin.i.king@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Provide a managed devm_clk_bulk* wrapper to get and enable all
bulk clocks in order to simplify drivers that keeps all clocks
enabled for the time of driver operation.
Suggested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Shradha Todi <shradha.t@samsung.com>
Link: https://lore.kernel.org/r/20240220084046.23786-2-shradha.t@samsung.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Infracfg can also operate as reset controller, add support for it.
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240201182409.39878-3-linux@fw-web.de
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Without the SGM_REG_SEL clock enabled the cpu freezes if trying to
access registers used by MT7981 clock drivers itself.
Mark SGM_REG_SEL as critical to make sure it is always enabled to
prevent freezes on boot even if the Ethernet driver which prepares
and enables the clock is not loaded or probed at a later point.
Fixes: 813c3b53b5 ("clk: mediatek: add MT7981 clock support")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://lore.kernel.org/r/fc157139e6b7f8dfb6430ac7191ba754027705e8.1708221995.git.daniel@makrotopia.org
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
CLK_INFRA_SSPM_32K_SELF has the "f_f26m_ck" clock assigned as its parent.
This is inconsistent as the clock is part of a group that are all gates
without dividers, and this makes the kernel think it runs at 26 MHz.
After clarification from MediaTek engineers, the correct parent is
actually the system 32 KHz clock.
Fixes: 1eb8d61ac5 ("clk: mediatek: mt8183: Add back SSPM related clocks")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20240219105125.956278-1-wenst@chromium.org
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
'clk_data' is allocated with mtk_devm_alloc_clk_data(). So calling
mtk_free_clk_data() explicitly in the remove function would lead to a
double-free.
Remove the redundant call.
Fixes: c50e2ea650 ("clk: mediatek: mt7622-apmixedsys: Add .remove() callback for module build")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/2c553c2a5077757e4f7af0bb895acc43881cf62c.1704616152.git.christophe.jaillet@wanadoo.fr
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
If an error occurs after mtk_alloc_clk_data(), mtk_free_clk_data() should
be called, as already done in the remove function.
Fixes: 54b7026f01 ("clk: mediatek: mt8135-apmixedsys: Convert to platform_driver and module")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/6cd6af61e5a91598068227f1f68cfcfde1507453.1704615011.git.christophe.jaillet@wanadoo.fr
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
As noted in the "Deprecated Interfaces, Language Features, Attributes,
and Conventions" documentation [1], size calculations (especially
multiplication) should not be performed in memory allocator (or similar)
function arguments due to the risk of them overflowing. This could lead
to values wrapping around and a smaller allocation being made than the
caller was expecting. Using those allocations could lead to linear
overflows of heap memory and other misbehaviors.
So, use the purpose specific devm_kcalloc() function instead of the
argument size * count in the devm_kzalloc() function.
Link: https://www.kernel.org/doc/html/next/process/deprecated.html#open-coded-arithmetic-in-allocator-arguments [1]
Link: https://github.com/KSPP/linux/issues/162
Signed-off-by: Erick Archer <erick.archer@gmx.com>
Link: https://lore.kernel.org/r/20240121142946.2796-1-erick.archer@gmx.com
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
'p_clk' is an array allocated just before the for loop for all clk that
need to be registered.
It is incremented at each loop iteration.
If a clk_register() call fails, 'p_clk' may point to something different
from what should be freed.
The best we can do, is to avoid this wrong release of memory.
Fixes: 6c81966107 ("clk: hisilicon: Add clock driver for hi3559A SoC")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/773fc8425c3b8f5b0ca7c1d89f15b65831a85ca9.1705850155.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
This driver has never been used in the DT files merged to the kernel.
According to Sibi, it only worked on the pre-production devices. For the
production devices this functionality has been moved to the firmware.
Drop the driver to remove possible confusion.
Cc: Sibi Sankar <quic_sibis@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240216-drop-sc7180-mss-v1-1-0a8dc8d71c0c@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Instead of magically poking at the bit0 of branch clocks' CBCR, use
the newly introduced helper.
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240212-topic-clk_branch_en-v7-2-5b79eb7278b2@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
We hardcode some clocks to be always-on, as they're essential to the
functioning of the SoC / some peripherals. Add a helper to do so
to make the writes less magic.
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240212-topic-clk_branch_en-v7-1-5b79eb7278b2@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
According to the R-Car V4H Series Hardware User’s Manual Rev.1.00, the
parent clock of the Pin Function (PFC/GPIO) module clocks is the CP
clock.
Fix this by adding the missing CP clock, and correcting the PFC parents.
Fixes: f2afa78d5a ("dt-bindings: clock: Add r8a779g0 CPG Core Clock Definitions")
Fixes: 36ff366033 ("clk: renesas: r8a779g0: Add PFC/GPIO clocks")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/5401fccd204dc90b44f0013e7f53b9eff8df8214.1706197297.git.geert+renesas@glider.be
Add new entries in the gcc driver for some more resets found on MSM8953.
Signed-off-by: Vladimir Lypak <vladimir.lypak@gmail.com>
[luca: expand commit message, move entry, add more entries]
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240125-msm8953-mdss-reset-v2-2-fd7824559426@z3ntu.xyz
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
There is no need to register video clock controllers during subsys init
calls. Use module_platform_driver() instead.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240206-clk-module-platform-driver-v1-4-db799bd2feeb@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
There is no need to register GPU clock controllers during subsys init
calls. Use module_platform_driver() instead.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240206-clk-module-platform-driver-v1-3-db799bd2feeb@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
There is no need to register display clock controllers during subsys init
calls. Use module_platform_driver() instead.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240206-clk-module-platform-driver-v1-2-db799bd2feeb@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
There is no need to register camera clock controllers during subsys init
calls. Use module_platform_driver() instead.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240206-clk-module-platform-driver-v1-1-db799bd2feeb@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Some Venus resets may require more time when toggling. Describe that.
The value for SM8550 is known and extracted from the msm-5.15 driver.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240105-topic-venus_reset-v2-18-c37eba13b5ce@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Some Venus resets may require more time when toggling. Describe that.
The Venus hw on 8650 is similar to the one on 8550, follow its
requirements.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240105-topic-venus_reset-v2-13-c37eba13b5ce@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Some Venus resets may require more time when toggling. Describe that.
The value for SM8550 is known and extracted from the msm-5.15 driver.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240105-topic-venus_reset-v2-12-c37eba13b5ce@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Some Venus resets may require more time when toggling. Describe that.
The value was obtained on a best-guess basis: msm-5.4 being the base
kernel for this SoC and 4450 being somewhat close to 8350 which is known
to require a higher delay [1].
[1] dfe241edf2
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240105-topic-venus_reset-v2-7-c37eba13b5ce@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Some Venus resets may require more time when toggling. Describe that.
The value was obtained on a best-guess basis: msm-5.4 being the base
kernel for this SoC and 8280 being generally close to 8350 which is known
to require a higher delay [1].
[1] dfe241edf2
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240105-topic-venus_reset-v2-6-c37eba13b5ce@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Some Venus resets may require more time when toggling. Describe that.
The value was obtained on a best-guess basis: msm-5.4 being the base
kernel for this SoC and 8775 being generally close to 8350 which is known
to require a higher delay [1].
[1] dfe241edf2
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240105-topic-venus_reset-v2-4-c37eba13b5ce@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Trying to toggle the resets in a rapid fashion can lead to the changes
not actually arriving at the clock controller block when we expect them
to. This was observed at least on SM8250.
Read back the value after regmap_update_bits to ensure write completion.
Fixes: b36ba30c8a ("clk: qcom: Add reset controller support")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240105-topic-venus_reset-v2-3-c37eba13b5ce@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
CMU_PERIC1 is the clock management unit used for the peric1 block which
is used for additional USI, I3C and PWM interfaces/busses. Add support
for muxes, dividers and gates of cmu_peric1, except for
CLK_GOUT_PERIC1_IP which isn't well described in the datasheet and
which downstream also ignores (similar to cmu_peric0).
Two clocks have been marked as CLK_IS_CRITICAL for the following
reason:
* disabling them makes it impossible to access any peric1
registers, (including those two registers).
* disabling gout_peric1_lhm_axi_p_peric1_i_clk sometimes has the
additional effect of making the whole system unresponsive.
One clock marked as CLK_IGNORE_UNUSED needs to be kept on until we have
updated the respective driver for the following reason:
* gout_peric1_gpio_peric1_pclk is required by the pinctrl
configuration. With this clock disabled, reconfiguring the pins
(for USI/I2C, USI/UART) will hang during register access.
Since pinctrl-samsung doesn't support a clock at the moment, we
just keep the kernel from disabling it at boot, until we have an
update for pinctrl-samsung, at which point we'll drop the flag.
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Peter Griffin <peter.griffin@linaro.org>
Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Link: https://lore.kernel.org/r/20240201161258.1013664-4-andre.draszik@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
There is an extra empty line here which doesn't exist in any of the
other cmu code blocks in this file.
Drop it to align cmu_top with the rest of the file.
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Peter Griffin <peter.griffin@linaro.org>
Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Link: https://lore.kernel.org/r/20240201161258.1013664-2-andre.draszik@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
They do the same thing, except the last argument of the last function
call differs. Commonize them.
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240105-topic-venus_reset-v2-2-c37eba13b5ce@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The TCSR clock controller found on X1E80100 provides refclks
for PCIE, USB and UFS. Add clock driver for it.
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240202-x1e80100-clock-controllers-v4-9-7fb08c861c7c@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
After splitting the MSSPLL in two, the PLL outputs have become
open-coded versions of clk_divider. Drop the custom clk ops structs, and
instead use the generic clk_divider_ops.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
The MSSPLL has 4 outputs, of which only the cpu/axi/ahb clock parent is
currently implemented.
Add the CAN clock too, as that'll be needed by the driver for the CAN
controller and uses output 3.
While we are here, the other two missing clocks, used by the eMMC/SD
controller and by the "user crypto".
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Now that the MSSPLL is split, and the "postdiv" divider of the
cpu/AHB/AXI bus clock is represented by its own "hw" struct, make the
shifts, register offset and width a parameter of the initialisation
macro, rather than using defines that only work for one of the four
outputs.
Configuring this at initialisaion paves the way for using the other
three output clocks, where the register offset, and the bit shift
within that register, will differ.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
The MSSPLL is really two stages - there's the PLL itself and 4 outputs,
each with their own divider. The current driver models this as a single
entity, outputting a single clock, used for both the CPU and AHB/AXI
buses. The other 3 outputs are used for the eMMC, "user crypto" and CAN
controller. Split the MSSPLL in two, as a precursor to adding support
for the other 3 outputs, with the PLL itself as one "hw" clock and the
output divider stage as another.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Add the module clocks used by the Pin Function Controller (PFC) and
General Purpose Input/Output (GPIO) blocks on the Renesas R-Car V4M
(R8A779H0) SoC.
Signed-off-by: Cong Dang <cong.dang.xn@renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://lore.kernel.org/r/a7d8f4111b87decb825db5ed310de8294f90b9f9.1706266196.git.geert+renesas@glider.be
When SPI transfer is being prepared, the spi-s3c64xx driver will call
clk_set_rate() to change the rate of SPI source clock (IPCLK). But IPCLK
is a gate (leaf) clock, so it must propagate the rate change up the
clock tree, so that corresponding DIV clocks can actually change their
divider values. Add CLK_SET_RATE_PARENT flag to corresponding clocks for
all SPI instances in Exynos850 (spi_0, spi_1 and spi_2) to make it
possible. This change involves next clocks:
usi_spi_0:
Clock Block Div range
--------------------------------------------
gout_spi0_ipclk CMU_PERI -
dout_peri_spi0 CMU_PERI /1..32
mout_peri_spi_user CMU_PERI -
dout_peri_ip CMU_TOP /1..16
usi_cmgp0:
Clock Block Div range
--------------------------------------------
gout_cmgp_usi0_ipclk CMU_CMGP -
dout_cmgp_usi0 CMU_CMGP /1..32
mout_cmgp_usi0 CMU_CMGP -
gout_clkcmu_cmgp_bus CMU_APM -
dout_apm_bus CMU_APM /1..8
usi_cmgp1:
Clock Block Div range
--------------------------------------------
gout_cmgp_usi1_ipclk CMU_CMGP -
dout_cmgp_usi1 CMU_CMGP /1..32
mout_cmgp_usi1 CMU_CMGP -
gout_clkcmu_cmgp_bus CMU_APM -
dout_apm_bus CMU_APM /1..8
With input clock of 400 MHz, this scheme provides next IPCLK rate range,
for each SPI block:
SPI0: 781 kHz ... 400 MHz
SPI1/2: 1.6 MHz ... 400 MHz
Accounting for internal /4 divider in SPI blocks, and because the max
SPI frequency is limited at 50 MHz, it gives us next SPI SCK rates:
SPI0: 200 kHz ... 49.9 MHz
SPI1/2: 400 kHz ... 49.9 MHz
Which should cover all possible applications of SPI bus. Of course,
setting SPI frequency to values as low as 500 kHz will also affect the
common bus dividers (dout_apm_bus or dout_peri_ip), which in turn
effectively lowers the rates for all leaf bus clocks derived from those
dividers, like HSI2C and I3C clocks. But at least it gives the board
designer a choice, whether to keep all clocks (SPI/HSI2C/I3C) at high
frequencies, or make all those clocks have lower frequencies. Not
propagating the rate change to those common dividers would limit this
choice to "only high frequencies are allowed for SPI/HSI2C/I3C" option,
making the common dividers useless. This decision follows the "Worse is
better" approach, relying on the users/engineers to know the system
internals when working with such low-level features, instead of trying
to account for all possible use-cases.
Fixes: 7dd0557819 ("clk: samsung: Introduce Exynos850 clock driver")
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Link: https://lore.kernel.org/r/20240125013858.3986-2-semen.protsenko@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
This pclk clock is required any time we access the pinctrl registers of
this block.
Since pinctrl-samsung doesn't support a clock at the moment, we just
keep the kernel from disabling it at boot, until we have an update for
pinctrl-samsung to handle this required clock, at which point we'll be
able to drop the flag again.
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Reviewed-by: Peter Griffin <peter.griffin@linaro.org>
Link: https://lore.kernel.org/r/20240130093812.1746512-2-andre.draszik@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
R-Car V4H and V4M have a second Frequency Control Register C.
Add support for this by treating bit field offsets beyond 31 as
referring to the second register.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/f64d5573a92a18505619ff0ff808d50cfc2bde55.1706194617.git.geert+renesas@glider.be
Add CRU clock and reset entries to CPG driver.
CRU_SYSCLK and CRU_VCLK clocks need to be turned ON/OFF in particular
sequence for the CRU block hence add these clocks to
r9a07g043_no_pm_mod_clks[] array and pass it as part of CPG data for
RZ/G2UL SoCs.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20240123114415.290918-1-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
RZ/G3S has a watchdog module accessible by the Cortex-A core. Add clock
and reset support for it.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20240122111115.2861835-2-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
On SA8295P and SA8540P the GFX rail is powered by a dedicated external
regulator, instead of the rpmh-controlled "gfx.lvl".
Define the "vdd-gfx" as the supply regulator for the GDSC, to cause the
gdsc logic to look for, and control, this external power supply.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Link: https://lore.kernel.org/r/20240125-sa8295p-gpu-v4-3-7011c2a63037@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The GX GDSC is modelled to aid the GMU in powering down the GPU in the
event that the GPU crashes, so that it can be restarted again. But in
the event that the power-domain is supplied through a dedicated
regulator (in contrast to being a subdomin of another power-domain),
something needs to turn that regulator on, both to make sure things are
powered and to match the operation in gdsc_disable().
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Link: https://lore.kernel.org/r/20240125-sa8295p-gpu-v4-2-7011c2a63037@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add gcc video axic, axi0 and axi1 resets for the global clock
controller on sm8150.
Signed-off-by: Satya Priya Kakitapalli <quic_skakitap@quicinc.com>
Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240111-sm8150-dfs-support-v2-3-6edb44c83d3b@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Move the function description comment to immediately above the
function implementation, the add function parameter descriptions to
prevent kernel-doc warnings:
clk-usb.c:80: warning: expecting prototype for sunxi_usb_clk_setup(). Prototype was for SUNXI_USB_MAX_SIZE() instead
clk-usb.c:91: warning: Function parameter or struct member 'node' not described in 'sunxi_usb_clk_setup'
clk-usb.c:91: warning: Function parameter or struct member 'data' not described in 'sunxi_usb_clk_setup'
clk-usb.c:91: warning: Function parameter or struct member 'lock' not described in 'sunxi_usb_clk_setup'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Emilio López <emilio@elopez.com.ar>
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: <linux-clk@vger.kernel.org>
Cc: Chen-Yu Tsai <wens@csie.org>
Cc: Jernej Skrabec <jernej.skrabec@gmail.com>
Cc: Samuel Holland <samuel@sholland.org>
Cc: <linux-arm-kernel@lists.infradead.org>
Cc: <linux-sunxi@lists.linux.dev>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20240121051858.17647-1-rdunlap@infradead.org
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Move the function description kernel-doc comment to immediately above
the function implementation, correct the function name in the comment,
then add a function parameter description to prevent these kernel-doc
warnings:
drivers/clk/sunxi/clk-sun9i-cpus.c:25: warning: expecting prototype for sun9i_a80_cpus_clk_setup(). Prototype was for SUN9I_CPUS_MAX_PARENTS() instead
clk-sun9i-cpus.c:184: warning: Function parameter or struct member 'node' not described in 'sun9i_a80_cpus_setup'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Emilio López <emilio@elopez.com.ar>
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: <linux-clk@vger.kernel.org>
Cc: Chen-Yu Tsai <wens@csie.org>
Cc: Jernej Skrabec <jernej.skrabec@gmail.com>
Cc: Samuel Holland <samuel@sholland.org>
Cc: <linux-arm-kernel@lists.infradead.org>
Cc: <linux-sunxi@lists.linux.dev>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20240121051845.17603-1-rdunlap@infradead.org
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Move the function kernel-doc comment to be immediately before the
function implementation, then add a function parameter description
to prevent kernel-doc warnings:
clk-a20-gmac.c:43: warning: expecting prototype for sun7i_a20_gmac_clk_setup(). Prototype was for SUN7I_A20_GMAC_GPIT() instead
clk-a20-gmac.c:53: warning: Function parameter or struct member 'node' not described in 'sun7i_a20_gmac_clk_setup'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Emilio López <emilio@elopez.com.ar>
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: <linux-clk@vger.kernel.org>
Cc: Chen-Yu Tsai <wens@csie.org>
Cc: Jernej Skrabec <jernej.skrabec@gmail.com>
Cc: Samuel Holland <samuel@sholland.org>
Cc: <linux-arm-kernel@lists.infradead.org>
Cc: <linux-sunxi@lists.linux.dev>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20240121051837.17564-1-rdunlap@infradead.org
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
After the DT conversion of SH-Mobile and Armadillo-800-EVA display
support, all devices are registered from DT, so we can remove the
registration of clkdevs.
Add the missing #include <linux/slab.h>, which was included implicitly
through <linux/clkdev.h> before.
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/e98a6e47ebecc44fa41de6d88b4ed20c6efbd177.1705931322.git.geert+renesas@glider.be
Some boards might use Linux and another OS at the same time. In such
case, currently, during booting, Linux will stop necessary module clocks
which are not used on the Linux side, but are used by another OS.
To avoid such situation, renesas-cpg-mssr tries to find
status = "reserved" devices (A), and adds CLK_IGNORE_UNUSED flag to its
<&cgp CPG_MOD xxx> clock (B).
Table 2.4: Values for status property
https://github.com/devicetree-org/devicetree-specification/releases/download/v0.4/devicetree-specification-v0.4.pdf
"reserved"
Indicates that the device is operational, but should not be
used. Typically this is used for devices that are controlled
by another software component, such as platform firmware.
ex)
scif5: serial@e6f30000 {
...
(B) clocks = <&cpg CPG_MOD 202>,
<&cpg CPG_CORE R8A7795_CLK_S3D1>,
<&scif_clk>;
...
(A) status = "reserved";
};
Cc: Aymeric Aillet <aymeric.aillet@iot.bzh>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Yusuke Goda <yusuke.goda.sx@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/878r4ygfap.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
With the addition of RPMh power domain to the GCC node in
device tree, we noticed a significant delay in getting the
UFS driver probed on AOSP which futher led to mount failures
because Android do not support rootwait. So adding a soft
dependency on RPMh power domain which informs modprobe to
load rpmhpd module before gcc-sdm845.
Cc: stable@vger.kernel.org # v5.4+
Fixes: 4b6ea15c0a ("arm64: dts: qcom: sdm845: Add missing RPMh power domain to GCC")
Suggested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20240123062814.2555649-1-amit.pundir@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Without it system hangs upon wifi firmware load. It should be enabled by
remoteproc/wifi driver. Bindings already exist for it, so add it based
on vendor code.
Signed-off-by: Mantas Pucka <mantas@8devices.com>
Link: https://lore.kernel.org/r/1706001970-26032-1-git-send-email-mantas@8devices.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
CMU_PERIC0 is the clock management unit used for the peric0 block which
is used for USI and I3C. Add support for all cmu_peric0 clocks but
CLK_GOUT_PERIC0_IP (not enough info in the datasheet).
Few clocks are marked as critical because when either of them is
disabled, the system hangs even if their clock parents are enabled.
Reviewed-by: Peter Griffin <peter.griffin@linaro.org>
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Link: https://lore.kernel.org/r/20240122114113.2582612-1-tudor.ambarus@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Update cmu_misc so it is registered early, as it contains
the gate which clocks the Multi Core Timer (MCT). This clock
is required early in boot, otherwise exynos_mct will fail
obtaining the clock.
Note this wasn't previously an issue as exynos_mct wasn't
enabled.
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Link: https://lore.kernel.org/r/20231222165355.1462740-3-peter.griffin@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
The cmu_misc clock-names were renamed to just "bus" and "sss" because
naming is local to the module, so cmu_misc is implied. As the bindings
and the device tree have not made a release yet, comply with the
renamed clocks.
Suggested-by: Rob Herring <robh@kernel.org>
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Link: https://lore.kernel.org/r/20240109114908.3623645-4-tudor.ambarus@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it as merged into the regular platform bus.
As part of that merge prepping Arm DT support 13 years ago, they
"temporarily" include each other. They also include platform_device.h
and of.h.
of_device.h isn't needed, but mod_devicetable.h and platform_device.h
were implicitly included.
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reviewed-by: Sibi Sankar <quic_sibis@quicinc.com>
Link: https://lore.kernel.org/r/20231211160510.0aef871b@canb.auug.org.au
[robh: Redo commit msg]
Signed-off-by: Rob Herring <robh@kernel.org>
SM8650 based on the diffstat. Otherwise this is a collection of non-critical
fixes and cleanups to various clk drivers and their DT bindings. Nothing is
changed in the core clk framework this time, although there's a patch to fix a
basic clk type initialization function. In general, this pile looks to be on
the smaller side.
New Drivers:
- Global, display, gpu, tcsr, and rpmh clocks on Qualcomm SM8650
- Mediatek MT7988 SoC clocks
Updates:
- Update Zynqmp driver for Versal NET platforms
- Add clk driver for Versal clocking wizard IP
- Support for stm32mp25 clks
- Add glitch free PLL setting support to si5351 clk driver
- Add DSI clocks on Amlogic g12/sm1
- Add CSI and ISP clocks on Amlogic g12/sm1
- Document bindings for i.MX93 ANATOP clock driver
- Free clk_node in i.MX SCU driver for resource with different owner
- Update the LVDS clocks to be compatible with i.MX SCU firmware 1.15
- Fix the name of the fvco in i.MX pll14xx by renaming it to fout
- Add EtherNet TSN and PCIe clocks on the Renesas R-Car V4H SoC
- Add interrupt controller and Ethernet clocks and resets on Renesas RZ/G3S
- Check reset monitor registers on Renesas RZ/G2L-alike SoCs
- Reuse reset functionality in the Renesas RZ/G2L clock driver
- Global and RPMh clock support for the Qualcomm X1E80100 SoC
- Support for the Stromer APCS PLL found in Qualcomm IPQ5018
- Add a new type of branch clock, with support for controlling separate
memory control bits, to the Qualcomm clk driver
- Use above new branch type in Qualcomm ECPRI clk driver for QDU1000 and
QRU1000
- Add a number of missing clocks related to CSI2 on Qualcomm MSM8939
- Add support for the camera clock controller on Qualcomm SC8280XP
- Correct PLL configuration in GPU and video clock controllers for
Qualcomm SM8150
- Add runtime PM support and a few missing resets to Qualcomm SM8150
video clock controller
- Fix configuration of various GCC GDSCs on Qualcomm SM8550
- Mark shared RCGs appropriately in the Qualcomm SM8550 GCC driver
- Fix up GPU and display clock controllers PLL configuration settings
on Qualcomm SM8550
- Cleanup variable init in Allwinner nkm module
- Convert various DT bindings to YAML
- A few kernel-doc fixes for Samsung SoC clock controllers
-----BEGIN PGP SIGNATURE-----
iQJFBAABCAAvFiEE9L57QeeUxqYDyoaDrQKIl8bklSUFAmWdydURHHNib3lkQGtl
cm5lbC5vcmcACgkQrQKIl8bklSXvtQ//eoF6kwlLT9knQIE9sYQAPJrHytObVpSl
3htHQBvSMKwJNTmzWbKWIUw9T7JliYU+aho768zKqVMVLd6PWk1eOL0NIKB/jSSz
/OIWxS9hrcTXm/GAKX+0jyAxw97pq0Qb82PNpD+QuLAcVw/5rMVl/+pMNqeVeqjK
2aN4QfaL7B1F1vV/rBtniG1//Hwwr7IMIT3wIBE6W4jlw84N2gayqEl/EaXabF6F
+9Wh8bPS1ny206XGtI8KNcFkv/uFoqWjO7g/hPgXMQcVSd50oV02iJPf6HaWBx4L
9podF3uhNuNk5v02fp1nCygzRn2YDa4eMwMjJtSxU0Inq9s01u8dWNkIgwuCJMjv
jSKMMgxa9rHhJ7+xiYi1pQ23fHG1tx600u1zKWMkO1a0U80KeeynGFpdfhUzsD6E
ZNUkEee2Ehw1nDMfrUqUt9dWLnRutCXa5jTvgKBWFM7hs9W+ErudAKwP0x2hNl3Z
q8Z6RpCoGNnb1e0nw407j3AsXJkbzg9D4KGMlNNEVmuP0iZY3IsVIWrhszx0Zmi4
M3sNNtTskbD4nX42JADhZgVpql2rSikxjfnaBsSXYSJu9SGkCF9clOSb1lKGgKmk
gCWcGpmxdmVbTNYCgsZ/jUBs8QDgOxcyFJYLys7/tkjDec9IuxeB37vkaXv2rqU8
t0VzUVWUqYw=
=t0CI
-----END PGP SIGNATURE-----
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"Only a couple new SoCs have support added this time, primarily for
Qualcomm SM8650 based on the diffstat. Otherwise this is a collection
of non-critical fixes and cleanups to various clk drivers and their DT
bindings.
Nothing is changed in the core clk framework this time, although
there's a patch to fix a basic clk type initialization function. In
general, this pile looks to be on the smaller side.
New Drivers:
- Global, display, gpu, tcsr, and rpmh clocks on Qualcomm SM8650
- Mediatek MT7988 SoC clocks
Updates:
- Update Zynqmp driver for Versal NET platforms
- Add clk driver for Versal clocking wizard IP
- Support for stm32mp25 clks
- Add glitch free PLL setting support to si5351 clk driver
- Add DSI clocks on Amlogic g12/sm1
- Add CSI and ISP clocks on Amlogic g12/sm1
- Document bindings for i.MX93 ANATOP clock driver
- Free clk_node in i.MX SCU driver for resource with different owner
- Update the LVDS clocks to be compatible with i.MX SCU firmware 1.15
- Fix the name of the fvco in i.MX pll14xx by renaming it to fout
- Add EtherNet TSN and PCIe clocks on the Renesas R-Car V4H SoC
- Add interrupt controller and Ethernet clocks and resets on Renesas
RZ/G3S
- Check reset monitor registers on Renesas RZ/G2L-alike SoCs
- Reuse reset functionality in the Renesas RZ/G2L clock driver
- Global and RPMh clock support for the Qualcomm X1E80100 SoC
- Support for the Stromer APCS PLL found in Qualcomm IPQ5018
- Add a new type of branch clock, with support for controlling
separate memory control bits, to the Qualcomm clk driver
- Use above new branch type in Qualcomm ECPRI clk driver for QDU1000
and QRU1000
- Add a number of missing clocks related to CSI2 on Qualcomm MSM8939
- Add support for the camera clock controller on Qualcomm SC8280XP
- Correct PLL configuration in GPU and video clock controllers for
Qualcomm SM8150
- Add runtime PM support and a few missing resets to Qualcomm SM8150
video clock controller
- Fix configuration of various GCC GDSCs on Qualcomm SM8550
- Mark shared RCGs appropriately in the Qualcomm SM8550 GCC driver
- Fix up GPU and display clock controllers PLL configuration settings
on Qualcomm SM8550
- Cleanup variable init in Allwinner nkm module
- Convert various DT bindings to YAML
- A few kernel-doc fixes for Samsung SoC clock controllers"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (93 commits)
clk: mediatek: add drivers for MT7988 SoC
clk: mediatek: add pcw_chg_bit control for PLLs of MT7988
dt-bindings: clock: mediatek: add clock controllers of MT7988
dt-bindings: reset: mediatek: add MT7988 ethwarp reset IDs
dt-bindings: clock: mediatek: add MT7988 clock IDs
clk: mediatek: mt8188-topckgen: Refactor parents for top_dp/edp muxes
clk: mediatek: mt8195-topckgen: Refactor parents for top_dp/edp muxes
clk: mediatek: clk-mux: Support custom parent indices for muxes
dt-bindings: clock: sophgo: Add clock controller of CV1800 series SoC
clk: starfive: jh7100: Add CLK_SET_RATE_PARENT to gmac_tx
clk: starfive: Add flags argument to JH71X0__MUX macro
clk: imx: pll14xx: change naming of fvco to fout
clk: imx: clk-imx8qxp: fix LVDS bypass, pixel and phy clocks
clk: imx: scu: Fix memory leak in __imx_clk_gpr_scu()
clk: fixed-rate: fix clk_hw_register_fixed_rate_with_accuracy_parent_hw
clk: qcom: dispcc-sm8650: Add test_ctl parameters to PLL config
clk: qcom: gpucc-sm8650: Add test_ctl parameters to PLL config
clk: qcom: dispcc-sm8550: Use the correct PLL configuration function
clk: qcom: dispcc-sm8550: Update disp PLL settings
clk: qcom: gpucc-sm8550: Update GPU PLL settings
...
A new drivers/cache/ subsystem is added to contain drivers for abstracting
cache flush methods on riscv and potentially others, as this is needed for
handling non-coherent DMA but several SoCs require nonstandard hardware
methods for it.
op-tee gains support for asynchronous notification with FF-A, as well
as support for a system thread for executing in secure world.
The tee, reset, bus, memory and scmi subsystems have a couple of minor
updates.
Platform specific soc driver changes include:
- Samsung Exynos gains driver support for Google GS101 (Tensor G1)
across multiple subsystems
- Qualcomm Snapdragon gains support for SM8650 and X1E along with
added features for some other SoCs
- Mediatek adds support for "Smart Voltage Scaling" on MT8186 and MT8195,
and driver support for MT8188 along with some code refactoring.
- Microchip Polarfire FPGA support for "Auto Update" of the FPGA bitstream
- Apple M1 mailbox driver is rewritten into a SoC driver
- minor updates on amlogic, mvebu, ti, zynq, imx, renesas and hisilicon
-----BEGIN PGP SIGNATURE-----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=4bKY
-----END PGP SIGNATURE-----
Merge tag 'soc-drivers-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"A new drivers/cache/ subsystem is added to contain drivers for
abstracting cache flush methods on riscv and potentially others, as
this is needed for handling non-coherent DMA but several SoCs require
nonstandard hardware methods for it.
op-tee gains support for asynchronous notification with FF-A, as well
as support for a system thread for executing in secure world.
The tee, reset, bus, memory and scmi subsystems have a couple of minor
updates.
Platform specific soc driver changes include:
- Samsung Exynos gains driver support for Google GS101 (Tensor G1)
across multiple subsystems
- Qualcomm Snapdragon gains support for SM8650 and X1E along with
added features for some other SoCs
- Mediatek adds support for "Smart Voltage Scaling" on MT8186 and
MT8195, and driver support for MT8188 along with some code
refactoring.
- Microchip Polarfire FPGA support for "Auto Update" of the FPGA
bitstream
- Apple M1 mailbox driver is rewritten into a SoC driver
- minor updates on amlogic, mvebu, ti, zynq, imx, renesas and
hisilicon"
* tag 'soc-drivers-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (189 commits)
memory: ti-emif-pm: Convert to platform remove callback returning void
memory: ti-aemif: Convert to platform remove callback returning void
memory: tegra210-emc: Convert to platform remove callback returning void
memory: tegra186-emc: Convert to platform remove callback returning void
memory: stm32-fmc2-ebi: Convert to platform remove callback returning void
memory: exynos5422-dmc: Convert to platform remove callback returning void
memory: renesas-rpc-if: Convert to platform remove callback returning void
memory: omap-gpmc: Convert to platform remove callback returning void
memory: mtk-smi: Convert to platform remove callback returning void
memory: jz4780-nemc: Convert to platform remove callback returning void
memory: fsl_ifc: Convert to platform remove callback returning void
memory: fsl-corenet-cf: Convert to platform remove callback returning void
memory: emif: Convert to platform remove callback returning void
memory: brcmstb_memc: Convert to platform remove callback returning void
memory: brcmstb_dpfe: Convert to platform remove callback returning void
soc: qcom: llcc: Fix LLCC_TRP_ATTR2_CFGn offset
firmware: qcom: qseecom: fix memory leaks in error paths
dt-bindings: clock: google,gs101: rename CMU_TOP gate defines
soc: qcom: llcc: Fix typo in kernel-doc
dt-bindings: soc: qcom,aoss-qmp: document the X1E80100 Always-On Subsystem side channel
...
* clk-rs9:
clk: rs9: Add support for 9FGV0841
clk: rs9: Replace model check with bitshift from chip data
clk: rs9: Limit check to vendor ID in VID register
dt-bindings: clk: rs9: Add 9FGV0841
Add APMIXED, ETH, INFRACFG and TOPCKGEN clock drivers which are
typical MediaTek designs.
Also add driver for XFIPLL clock generating the 156.25MHz clock for
the XFI SerDes. It needs an undocumented software workaround and has
an unknown internal design.
Signed-off-by: Sam Shih <sam.shih@mediatek.com>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/c7574d808e2da1a530182f0fd790c1337c336e1b.1702849494.git.daniel@makrotopia.org
[sboyd@kernel.org: Add module license to infracfg file]
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Introduce pcw_chg_bit member to struct mtk_pll_data and use it instead
of the previously hardcoded PCW_CHG_MASK macro if set.
This will needed for clocks on the MT7988 SoC.
Signed-off-by: Sam Shih <sam.shih@mediatek.com>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/3b9c65ddb08c8bedf790aacf29871af026b6f0b7.1702849494.git.daniel@makrotopia.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The top_dp and top_edp muxes can be both parented to either TVDPLL1
or TVDPLL2, two identically specced PLLs for the specific purpose of
giving out pixel clock: this becomes a problem when the MediaTek
DisplayPort Interface (DPI) driver tries to set the pixel clock rate.
In the usecase of two simultaneous outputs (using two controllers),
it was seen that one of the displays would sometimes display garbled
output (if any at all) and this was because:
- top_edp was set to TVDPLL1, outputting X GHz
- top_dp was set to TVDPLL2, outputting Y GHz
- mtk_dpi calls clk_set_rate(top_edp, Z GHz)
- top_dp is switched to TVDPLL1
- TVDPLL1 changes its rate, top_edp outputs the wrong rate.
- eDP display is garbled
To solve this issue, remove all TVDPLL1 parents from `top_dp` and
all TVDPLL2 parents from `top_edp`, plus, necessarily switch both
clocks to use the new MUX_GATE_CLR_SET_UPD_INDEXED() macro to be
able to use the right bit index for the new parents list.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20231103102533.69280-4-angelogioacchino.delregno@collabora.com
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Tested-by: Fei Shao <fshao@chromium.org>
Reviewed-by: Fei Shao <fshao@chromium.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The top_dp and top_edp muxes can be both parented to either TVDPLL1
or TVDPLL2, two identically specced PLLs for the specific purpose of
giving out pixel clock: this becomes a problem when the MediaTek
DisplayPort Interface (DPI) driver tries to set the pixel clock rate.
In the usecase of two simultaneous outputs (using two controllers),
it was seen that one of the displays would sometimes display garbled
output (if any at all) and this was because:
- top_edp was set to TVDPLL1, outputting X GHz
- top_dp was set to TVDPLL2, outputting Y GHz
- mtk_dpi calls clk_set_rate(top_edp, Z GHz)
- top_dp is switched to TVDPLL1
- TVDPLL1 changes its rate, top_edp outputs the wrong rate.
- eDP display is garbled
To solve this issue, remove all TVDPLL1 parents from `top_dp` and
all TVDPLL2 parents from `top_edp`, plus, necessarily switch both
clocks to use the new MUX_GATE_CLR_SET_UPD_INDEXED() macro to be
able to use the right bit index for the new parents list.
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20231103102533.69280-3-angelogioacchino.delregno@collabora.com
Reviewed-by: Fei Shao <fshao@chromium.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Add support for customized parent indices for MediaTek muxes: this is
necessary for the case in which we want to exclude some clocks from
a mux's parent clocks list, where the exclusions are not from the
very bottom of the list but either in the middle or the beginning.
Example:
- MUX1 (all parents)
- parent1; idx=0
- parent2; idx=1
- parent3; idx=2
- MUX1 (wanted parents)
- parent1; idx=0
- parent3; idx=2
To achieve that add a `parent_index` array pointer to struct mtk_mux,
then in .set_parent(), .get_parent() callbacks check if this array
was populated and eventually get the index from that.
Also, to avoid updating all clock drivers for all SoCs, rename the
"main" macro to __GATE_CLR_SET_UPD_FLAGS (so, `__` was added) and
add the new member to it; furthermore, GATE_CLK_SET_UPD_FLAGS has
been reintroduced as being fully compatible with the older version.
The new parent_index can be specified with the new `_INDEXED`
variants of the MUX_GATE_CLR_SET_UPD_xxxx macros.
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20231103102533.69280-2-angelogioacchino.delregno@collabora.com
Tested-by: Fei Shao <fshao@chromium.org>
Reviewed-by: Fei Shao <fshao@chromium.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
This is needed by the dwmac-starfive ethernet driver to set the clock
for 1000, 100 and 10 Mbps links properly.
Signed-off-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20231219232442.2460166-3-cristian.ciocaltea@collabora.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
This flag is needed to add the CLK_SET_RATE_PARENT flag on the gmac_tx
clock on the JH7100, which in turn is needed by the dwmac-starfive
driver to set the clock properly for 1000, 100 and 10 Mbps links.
This change was mostly made using coccinelle:
@ match @
expression idx, name, nparents;
@@
JH71X0__MUX(
-idx, name, nparents,
+idx, name, 0, nparents,
...)
Signed-off-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20231219232442.2460166-2-cristian.ciocaltea@collabora.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
pll14xx_calc_rate() output the fout clock not the fvco clock
The relation of fvco and fout is:
fout = fvco / (1 << sdiv)
So use correct naming for the clock.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Marco Felsch <m.felsch@pengutronix.de>
Link: https://lore.kernel.org/r/1703068389-6130-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
To be compatible with SCU firmware based on 1.15 a different clock
routing for LVDS is needed.
Signed-off-by: Oliver F. Brown <oliver.brown@oss.nxp.com>
Signed-off-by: Ranjani Vaidyanathan <ranjani.vaidyanathan@nxp.com>
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20231218122407.2757175-1-alexander.stein@ew.tq-group.com/
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
In cases where imx_clk_is_resource_owned() returns false, the code path
does not handle the failure gracefully, potentially leading to a memory
leak. This fix ensures proper cleanup by freeing the allocated memory
for 'clk_node' before returning.
Signed-off-by: Kuan-Wei Chiu <visitorckw@gmail.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/all/20231210171907.3410922-1-visitorckw@gmail.com/
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
To ensure that all fields (particularly CAL_L and CAL_L_RINGOSC) are
filled properly, use the correct prepare function for OLE PLLs.
Fixes: 90114ca114 ("clk: qcom: add SM8550 DISPCC driver")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231218-topic-8550_fixes-v1-9-ce1272d77540@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The settings in the driver seem to have been taken from an older
release. Update them to match the latest values.
Fixes: 90114ca114 ("clk: qcom: add SM8550 DISPCC driver")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231218-topic-8550_fixes-v1-8-ce1272d77540@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The settings in the driver seem to have been taken from an older
release. Update them to match the latest values.
Fixes: bfae40744b ("clk: qcom: gpucc-sm8550: Add support for graphics clock controller")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231218-topic-8550_fixes-v1-7-ce1272d77540@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The PCIe GDSCs can be shared with other masters and should use the APCS
collapse-vote register when updating the power state.
This is specifically also needed to be able to disable power domains
that have been enabled by boot firmware using the vote register.
Following other recent Qualcomm platforms, describe this register and
the corresponding mask for the PCIe (and _phy) GDSCs.
Fixes: 955f2ea3b9 ("clk: qcom: Add GCC driver for SM8550")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231218-topic-8550_fixes-v1-5-ce1272d77540@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The PCIe GDSCs on most Qualcomm platforms expect the OS to always
consider collapse requests as successful. This also concerns SM8550.
Add the VOTABLE flag to the GDSCs in question to comply with these
expectations.
Fixes: 955f2ea3b9 ("clk: qcom: Add GCC driver for SM8550")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231218-topic-8550_fixes-v1-4-ce1272d77540@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
All of the 8550's GCC GDSCs can and should use the retain registers so
as not to lose their state when entering lower power modes.
Fixes: 955f2ea3b9 ("clk: qcom: Add GCC driver for SM8550")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231218-topic-8550_fixes-v1-3-ce1272d77540@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The gs101 clock defines from the bindings header are derived from the
clock register names found in the datasheet under some certain rules.
The CMU TOP gate clock defines missed to include the required "CMU"
differentiator which will cause collisions with the gate clock defines
of other clock units. Rename the TOP gate clock defines to include "CMU".
Update the clock driver to use the new defines in order to not break
compilation and bisect-ability. There are no device trees that use the
previous defines.
Fixes: 0a910f1606 ("dt-bindings: clock: Add Google gs101 clock management unit bindings")
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Peter Griffin <peter.griffin@linaro.org>
Link: https://lore.kernel.org/r/20231218064333.479885-1-tudor.ambarus@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Introduce a new PLL reset mode flag which controls whether or not to
reset a PLL after adjusting its rate. The mode can be configured through
platform data or device tree.
Since commit 6dc669a22c ("clk: si5351: Add PLL soft reset"), the
driver unconditionally resets a PLL whenever its rate is adjusted.
The rationale was that a PLL reset was required to get three outputs
working at the same time. Before this change, the driver never reset the
PLLs.
Commit b26ff127c5 ("clk: si5351: Apply PLL soft reset before enabling
the outputs") subsequently introduced an option to reset the PLL when
enabling a clock output that sourced it. Here, the rationale was that
this is required to get a deterministic phase relationship between
multiple output clocks.
This clearly shows that it is useful to reset the PLLs in applications
where multiple clock outputs are used. However, the Si5351 also allows
for glitch-free rate adjustment of its PLLs if one avoids resetting the
PLL. In our audio application where a single Si5351 clock output is used
to supply a runtime adjustable bit clock, this unconditional PLL reset
behaviour introduces unwanted glitches in the clock output.
It would appear that the problem being solved in the former commit
may be solved by using the optional device tree property introduced in
the latter commit, obviating the need for an unconditional PLL reset
after rate adjustment. But it's not OK to break the default behaviour of
the driver, and it cannot be assumed that all device trees are using the
property introduced in the latter commit. Hence, the new behaviour is
made opt-in.
Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Cc: Rabeeh Khoury <rabeeh@solid-run.com>
Cc: Jacob Siverskog <jacob@teenage.engineering>
Cc: Sergej Sawazki <sergej@taudac.com>
Signed-off-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Link: https://lore.kernel.org/r/20231124-alvin-clk-si5351-no-pll-reset-v6-3-69b82311cb90@bang-olufsen.dk
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
regmap_bulk_write() return zero or negative error code, return the value
of regmap_bulk_write() rather than '0'.
Fixes: 3044a860fd ("clk: Add Si5341/Si5340 driver")
Acked-by: Mike Looijmans <mike.looijmans@topic.nl>
Signed-off-by: Su Hui <suhui@nfschina.com>
Link: https://lore.kernel.org/r/20231101031633.996124-1-suhui@nfschina.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Drop ret variable from vc3_clk_mux_determine_rate().
While at it, return the value returned by regmap_*
wherever possible instead of returning 0.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20231122142310.203169-6-biju.das.jz@bp.renesas.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Add missing space between ')' and '{' for hw.init initialization.
While at it, update the macro VC3_PLL1_LOOP_FILTER_N_DIV_MSB
0x0a->0xa.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20231122142310.203169-5-biju.das.jz@bp.renesas.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The return type of get_parent() member in struct clk_ops is u8.
Use same return type for corresponding callback function as well.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20231122142310.203169-4-biju.das.jz@bp.renesas.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Update vc3_get_div() to avoid divide by zero operation on
vc3_div_round_rate() by returning1, if there is no table match
found.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20231122142310.203169-2-biju.das.jz@bp.renesas.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
This model is similar to 9FGV0441, the DIFx bits start at bit 0 again,
except this chip has 8 outputs.
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Link: https://lore.kernel.org/r/20231113221949.111964-4-marek.vasut+renesas@mailbox.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Adjust rs9_calc_dif() to special-case the 9FGV0241 where DIFx bits
start at 1, encode this shift into chip data and drop the model
check entirely.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Link: https://lore.kernel.org/r/20231113221949.111964-3-marek.vasut+renesas@mailbox.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Extract only vendor ID from VID register, the top 4 bits are
revision ID which are not useful for the vendor ID check.
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Link: https://lore.kernel.org/r/20231113221949.111964-2-marek.vasut+renesas@mailbox.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Add support for Clocking Wizard for Versal adaptive compute
acceleration platforms. The Versal clocking wizard differs
in the programming model and the register layout.
The CLKFBOUT_1 registers are at offset of 0x200
instead of the 0x330 in Versal. In Versal clocking wizard the low and
high time is programmed instead of the divisor.
Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@amd.com>
Link: https://lore.kernel.org/r/20231214105125.26919-3-shubhrajyoti.datta@amd.com
[sboyd@kernel.org: Stop initializing spinlock flags]
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
As evidenced by the fact that only 2 other drivers include this header,
it is not a normal thing to do. Including the regular version of this
header is far more conventional for drivers.
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20231214-dipper-earshot-72eef3059961@spud
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
On 9FGV0241, the DIF OE0 is BIT(1) and DIF OE1 is BIT(2), on the other
chips like 9FGV0441 and 9FGV0841 DIF OE0 is BIT(0) and so on. Increment
the index in BIT() macro instead of the result of BIT() macro to shift
the bit correctly on 9FGV0241.
Fixes: 603df193ec ("clk: rs9: Support device specific dif bit calculation")
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Link: https://lore.kernel.org/r/20231105200642.62792-1-marek.vasut+renesas@mailbox.org
Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Currently zynqmp divider round rate is considering single parent and
calculating rate and parent rate accordingly. But if divider clock flag
is set to SET_RATE_PARENT then its not trying to traverse through all
parent rate and not selecting best parent rate from that. So use common
divider_round_rate() which is traversing through all clock parents and
its rate and calculating proper parent rate.
Fixes: 3fde0e16d0 ("drivers: clk: Add ZynqMP clock driver")
Signed-off-by: Jay Buddhabhatti <jay.buddhabhatti@amd.com>
Link: https://lore.kernel.org/r/20231129112916.23125-3-jay.buddhabhatti@amd.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Currently zynqmp clock driver is not calculating closest mux rate and
because of that Linux is not setting proper frequency for CPU and
not able to set given frequency for dynamic frequency scaling.
E.g., In current logic initial acpu clock parent and frequency as below
apll1 0 0 0 2199999978 0 0 50000 Y
acpu0_mux 0 0 0 2199999978 0 0 50000 Y
acpu0_idiv1 0 0 0 2199999978 0 0 50000 Y
acpu0 0 0 0 2199999978 0 0 50000 Y
After changing acpu frequency to 549999994 Hz using CPU freq scaling its
selecting incorrect parent which is not closest frequency.
rpll_to_xpd 0 0 0 1599999984 0 0 50000 Y
acpu0_mux 0 0 0 1599999984 0 0 50000 Y
acpu0_div1 0 0 0 533333328 0 0 50000 Y
acpu0 0 0 0 533333328 0 0 50000 Y
Parent should remain same since 549999994 = 2199999978 / 4.
So use __clk_mux_determine_rate_closest() generic function to calculate
closest rate for mux clock. After this change its selecting correct
parent and correct clock rate.
apll1 0 0 0 2199999978 0 0 50000 Y
acpu0_mux 0 0 0 2199999978 0 0 50000 Y
acpu0_div1 0 0 0 549999995 0 0 50000 Y
acpu0 0 0 0 549999995 0 0 50000 Y
Fixes: 3fde0e16d0 ("drivers: clk: Add ZynqMP clock driver")
Signed-off-by: Jay Buddhabhatti <jay.buddhabhatti@amd.com>
Link: https://lore.kernel.org/r/20231129112916.23125-2-jay.buddhabhatti@amd.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
In cases where mapping of mpmu/apmu/apbc registers fails, the code path
does not handle the failure gracefully, potentially leading to a memory
leak. This fix ensures proper cleanup by freeing the allocated memory
for 'pxa_unit' before returning.
Signed-off-by: Kuan-Wei Chiu <visitorckw@gmail.com>
Link: https://lore.kernel.org/r/20231210175232.3414584-1-visitorckw@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
In cases where kcalloc() fails for the 'clk_data->clks' allocation, the
code path does not handle the failure gracefully, potentially leading
to a memory leak. This fix ensures proper cleanup by freeing the
allocated memory for 'clk_data' before returning.
Signed-off-by: Kuan-Wei Chiu <visitorckw@gmail.com>
Link: https://lore.kernel.org/r/20231210165040.3407545-1-visitorckw@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
devm_platform_ioremap_resource() never returns NULL pointer,
it will return ERR_PTR() when it fails, so replace the check
with IS_ERR().
Fixes: d54c1fd4a5 ("clk: Add Sunplus SP7021 clock driver")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20231128133016.2494699-1-yangyingliang@huawei.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
If "regmap" is an error pointer then calling regmap_update_bits() will
crash. We only need to call regmap_update_bits() if we had written to
it earlier.
Fixes: ff93872a9c ("clk: qcom: camcc-sc8280xp: Add sc8280xp CAMCC")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/210d48ce-6ebc-4a6b-b30f-866d10d41a16@moroto.mountain
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add runtime PM support to ensure the supply rails are enabled
when necessary.
Signed-off-by: Satya Priya Kakitapalli <quic_skakitap@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231201-videocc-8150-v3-4-56bec3a5e443@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
When the driver was ported upstream, PLL test_ctl_hi1 register value
was omitted. Add it to ensure the PLLs are fully configured.
Fixes: 5658e8cf1a ("clk: qcom: add video clock controller driver for SM8150")
Signed-off-by: Satya Priya Kakitapalli <quic_skakitap@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231201-videocc-8150-v3-3-56bec3a5e443@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add all the available resets for the video clock controller
on sm8150.
Fixes: 5658e8cf1a ("clk: qcom: add video clock controller driver for SM8150")
Signed-off-by: Satya Priya Kakitapalli <quic_skakitap@quicinc.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231201-videocc-8150-v3-2-56bec3a5e443@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
and finally one new PLL rate for the rk3568 to fix display artifacts
on a handheld devices based on that soc.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAmVyLqUQHGhlaWtvQHNu
dGVjaC5kZQAKCRDzpnnJnNEdgcRmCACBK41MuaWd0yZdeQ0e/I1enSVESaWJSGtA
A8abX1SkMADA7yclnLCqQYs+dExiuftL/okNzhWYWNW3GSZYSg2ayqzgewCFYcHq
//+bLzikpxQM+UqobdRXkcrE7O0eDZEhQqhbSmvE/EDYtKWpovvS4jir5kBmbp+n
zXOzQ2uYLcGcl20hme5LpqXURK+q0c6F76/PPgIzXXQDnaildZvL5Imb4LhSh8DL
A4GWPJ8bAWfpFcFVWKW0ZF/HZlUX5X+3uyHTvZe1T1ctRiTePVTv6GNTptS3143A
hBPMnSzficc6cUVSton+z6MCC9lJw8HtJCqw3luj7SNAyCWUktCg
=oqhb
-----END PGP SIGNATURE-----
Merge tag 'v6.7-rockchip-clkfixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into clk-fixes
Pull Rockchip clk driver fixes for the merge window from Heiko Stuebner:
Fixes for a wrong clockname, a wrong clock-parent, a wrong clock-gate
and finally one new PLL rate for the rk3568 to fix display artifacts
on a handheld devices based on that soc.
* tag 'v6.7-rockchip-clkfixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
clk: rockchip: rk3128: Fix SCLK_SDMMC's clock name
clk: rockchip: rk3128: Fix aclk_peri_src's parent
clk: rockchip: rk3128: Fix HCLK_OTG gate register
clk: rockchip: rk3568: Add PLL rate for 292.5MHz
RZ/G3S has 2 Gigabit Ethernet interfaces available. Add clock and reset
support for both of them.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20231207070700.4156557-3-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
The hardware manual of both RZ/G2L and RZ/G3S specifies that the reset
monitor registers need to be interrogated when the reset signals are
toggled (chapters "Procedures for Supplying and Stopping Reset Signals"
and "Procedure for Activating Modules"). Without this, there is a
chance that different modules (e.g. Ethernet) are not ready after their
reset signal is toggled, leading to failures (on probe or resume from
deep sleep states).
The same indications are available for RZ/V2M for TYPE-B reset controls.
Fixes: ef3c613ccd ("clk: renesas: Add CPG core wrapper for RZ/G2L SoC")
Fixes: 8090bea324 ("clk: renesas: rzg2l: Add support for RZ/V2M reset monitor reg")
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20231207070700.4156557-2-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
An IA55 interrupt controller is available on the RZ/G3S SoC. Add the
IA55 pclk and its reset.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20231120111820.87398-2-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
cmu_top is the top level clock management unit which contains PLLs, muxes,
dividers and gates that feed the other clock management units.
cmu_misc clocks IPs such as Watchdog and cmu_apm clocks ips part of the
APM module.
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: André Draszik <andre.draszik@linaro.org>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Will McVicker <willmcvicker@google.com>
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Link: https://lore.kernel.org/r/20231211162331.435900-9-peter.griffin@linaro.org
[krzysztof: drop not needed linux/of_device.h include]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
These plls are found in the Tensor gs101 SoC found in the Pixel 6.
pll0516x: Integer PLL with high frequency
pll0517x: Integer PLL with middle frequency
pll0518x: Integer PLL with low frequency
PLL0516x
FOUT = (MDIV * 2 * FIN)/PDIV * 2^SDIV)
PLL0517x and PLL0518x
FOUT = (MDIV * FIN)/PDIV*2^SDIV)
The PLLs are similar enough to pll_0822x that the same code can handle
both. The main difference is the change in the fout formula for the
high frequency 0516 pll.
Locktime for 516,517 & 518 is 150 the same as the pll_0822x lock factor.
MDIV, SDIV PDIV masks and bit shifts are also the same as 0822x.
When defining the PLL the "con" parameter should be set to CON3
register, like this
PLL(pll_0517x, CLK_FOUT_SHARED0_PLL, "fout_shared0_pll", "oscclk",
PLL_LOCKTIME_PLL_SHARED0, PLL_CON3_PLL_SHARED0,
NULL),
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Will McVicker <willmcvicker@google.com>
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Link: https://lore.kernel.org/r/20231211162331.435900-8-peter.griffin@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Add support for the global clock controller found on X1E80100
based devices.
Co-developed-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Rajendra Nayak <quic_rjendra@quicinc.com>
Co-developed-by: Sibi Sankar <quic_sibis@quicinc.com>
Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Link: https://lore.kernel.org/r/20231205061002.30759-3-quic_sibis@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add the support for mem ops implementation to handle the sequence of
enable/disable of the memories in ethernet PHY, prior to enable/disable
of the respective clocks, which helps retain the respecive block's
register contents.
Signed-off-by: Taniya Das <quic_tdas@quicinc.com>
Signed-off-by: Imran Shaik <quic_imrashai@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231123064735.2979802-3-quic_imrashai@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add Global Clock Controller (GCC) tables for the SM8650 platform,
the driver plumbing will be added afterwards.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20231106-topic-sm8650-upstream-clocks-v3-6-761a6fadb4c0@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
When adding in the indexes for this clock-controller we missed
GCC_CAMSS_CSI2_AHB_CLK, GCC_CAMSS_CSI2_CLK, GCC_CAMSS_CSI2PHY_CLK,
GCC_CAMSS_CSI2PIX_CLK and GCC_CAMSS_CSI2RDI_CLK.
Add them in now and rename ftbl_gcc_camss_csi0_1_clk
to account for csi2 also using it.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Vincent Knecht <vincent.knecht@mailoo.org>
Link: https://lore.kernel.org/r/20231029061948.505883-2-vincent.knecht@mailoo.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add the sc8280xp CAMCC driver which follows the sdm845 CAMCC lineage
with additional CCI and IFE blocks and more granular clock parentage.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Link: https://lore.kernel.org/r/20231026105345.3376-4-bryan.odonoghue@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
In the reference manual under "2.8.6 NIU Clock gating reliance"
it is stated that pclk_usb_niu has a dependency on hclk_usb_niu.
While the manual does not state that this is a bi-directional
relationship it was noted that the sdmmc2 failed to operate for me in
mmc mode if the pclk_usb was not marked as critical. The parent clock
of the hclk_sdmmc2 is hclk_usb.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Link: https://lore.kernel.org/r/20231204185719.569021-8-macroalpha82@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Add support for a PLL rate of 126.4MHz so that the Powkiddy X55 panel
can run at a requested 60hz.
I have confirmed this rate fits with all the constraints
listed in the TRM for the VPLL (as an integer PLL) in Part 1 "Chapter
2 Clock & Reset Unit (CRU)."
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Link: https://lore.kernel.org/r/20231204185719.569021-9-macroalpha82@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
SCLK_SDMMC is the parent for SCLK_SDMMC_DRV and SCLK_SDMMC_SAMPLE, but
used with the (more) correct name sclk_sdmmc. SD card tuning does currently
fail as the parent can't be found under that name.
There is no need to suffix the name with '0' since RK312x SoCs do have a
single sdmmc controller - so rename it to the name which is already used
by it's children.
Fixes: f6022e88fa ("clk: rockchip: add clock controller for rk3128")
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Link: https://lore.kernel.org/r/20231127181415.11735-6-knaerzche@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
According to the TRM there are no specific gpll_peri, cpll_peri,
gpll_div2_peri or gpll_div3_peri gates, but a single clk_peri_src gate.
Instead mux_clk_peri_src directly connects to the plls respectively the pll
divider clocks.
Fix this by creating a single gated composite.
Also rename all occurrences of aclk_peri_src to clk_peri_src, since it
is the parent for peri aclks, pclks and hclks. That name also matches
the one used in the TRM.
Fixes: f6022e88fa ("clk: rockchip: add clock controller for rk3128")
Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com>
[renamed aclk_peri_src -> clk_peri_src and added commit message]
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Link: https://lore.kernel.org/r/20231127181415.11735-4-knaerzche@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
SM_GCC_8550 depends on ARM64 but it is selected by
SM_CAMCC_8550, which should have the same dependencies
as SM_GCC_8550 to avoid the below Kconfig warning reported
by kernel test robot.
WARNING: unmet direct dependencies detected for SM_GCC_8550
Depends on [n]: COMMON_CLK [=y] && COMMON_CLK_QCOM [=y] && (ARM64 || COMPILE_TEST [=n])
Selected by [y]:
- SM_CAMCC_8550 [=y] && COMMON_CLK [=y] && COMMON_CLK_QCOM [=y]
Fixes: ccc4e6a061 ("clk: qcom: camcc-sm8550: Add camera clock controller driver for SM8550")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202311062309.XugQH7AH-lkp@intel.com/
Signed-off-by: Jagadeesh Kona <quic_jkona@quicinc.com>
Link: https://lore.kernel.org/r/20231107064545.13120-1-quic_jkona@quicinc.com
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Code in rzg2l_cpg_reset() is equivalent with the combined code of
rzg2l_cpg_assert() and rzg2l_cpg_deassert(). There is no need to have
different versions thus re-use rzg2l_cpg_assert() and rzg2l_cpg_deassert().
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20231120070024.4079344-2-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Add the gates entries for the CSI ISP domain and CSI PHYs.
[jbrunet: fixed checkpatch spelling warning]
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Tested-by: Daniel Scally <dan.scally@ideasonboard.com>
Link: https://lore.kernel.org/r/20231114-topic-amlogic-upstream-isp-clocks-v1-3-223958791501@linaro.org
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Add the MIPI ISP gate, divider and mux used to feed the MIPI CSI ISP
(Image Signal Processor) IP on the Amlogic G12B SoC.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Tested-by: Daniel Scally <dan.scally@ideasonboard.com>
Link: https://lore.kernel.org/r/20231114-topic-amlogic-upstream-isp-clocks-v1-2-223958791501@linaro.org
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Add the PCIe module clocks, which are used by the PCIe modules on the
Renesas R-Car V4H (R8A779G0) SoC. Note that the following descriptions
in the hardware manual Rev.0.81 about the PCIe module clocks are
incorrect:
9.2.1.7 Software Reset Register 6 (SRCR6)
9.2.1.12 Software Reset Register 11 (SRCR11)
9.2.3.7 Module Stop Control Register 6 (MSTPCR6)
Please refer to Figures 104.3[ab] instead.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20231114122252.2266799-1-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Add the TSN module clock, which is used by the EtherTSN module on the
Renesas R-Car V4H (R8A779G0) SoC.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20231031145739.657638-1-niklas.soderlund+renesas@ragnatech.se
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Variable tmp_parent is being ininitialized with a value that is never
read, the initialization is redundant and can be removed. Move the
initialization and move the variable to the inner loop scope.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20231023133502.666559-1-colin.i.king@gmail.com
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Add support for a PLL rate of 292.5MHz so that the Powkiddy RGB30 panel
can run at a requested 60hz (59.96, close enough).
I have confirmed this rate fits with all the constraints
listed in the TRM for the VPLL (as an integer PLL) in Part 1 "Chapter
2 Clock & Reset Unit (CRU)."
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Link: https://lore.kernel.org/r/20231018153357.343142-2-macroalpha82@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Add support for a PLL rate of 115.2MHz so that the Powkiddy RK2023 panel
can run at a requested 60hz (59.99, close enough).
I have confirmed this rate fits with all the constraints
listed in the TRM for the VPLL (as an integer PLL) in Part 1 "Chapter
2 Clock & Reset Unit (CRU)."
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Link: https://lore.kernel.org/r/20231018161848.346947-4-macroalpha82@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Unify and improve the style of kernel-doc comments in Samsung CCF
framework. Resemble more idiomatic style described in [1] and commonly
used throughout most of the kernel code.
[1] Documentation/doc-guide/kernel-doc.rst
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20231109190925.2066-2-semen.protsenko@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Fix some issues found in kernel-doc comments in Samsung CCF framework.
It makes scripts/kernel-doc happy, which can be checked with:
$ find drivers/clk/samsung/ -name '*.[ch]' -exec \
scripts/kernel-doc -v -none {} \;
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Fixes: ddeac8d968 ("clk: samsung: add infrastructure to register cpu clocks")
Fixes: 721c42a351 ("clk: samsung: add common clock framework helper functions for Samsung platforms")
Fixes: 3ff6e0d8d6 ("clk: samsung: Add support to register rate_table for samsung plls")
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20231109190925.2066-1-semen.protsenko@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
The highlights for the driver support this time are
- Qualcomm platforms gain support for the Qualcomm Secure Execution
Environment firmware interface to access EFI variables on certain
devices, and new features for multiple platform and firmware drivers.
- Arm FF-A firmware support gains support for v1.1 specification features,
in particular notification and memory transaction descriptor changes.
- SCMI firmware support now support v3.2 features for clock and DVFS
configuration and a new transport for Qualcomm platforms.
- Minor cleanups and bugfixes are added to pretty much all the active
platforms: qualcomm, broadcom, dove, ti-k3, rockchip, sifive, amlogic,
atmel, tegra, aspeed, vexpress, mediatek, samsung and more.
In particular, this contains portions of the treewide conversion to
use __counted_by annotations and the device_get_match_data helper.
-----BEGIN PGP SIGNATURE-----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=QIut
-----END PGP SIGNATURE-----
Merge tag 'soc-drivers-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"The highlights for the driver support this time are
- Qualcomm platforms gain support for the Qualcomm Secure Execution
Environment firmware interface to access EFI variables on certain
devices, and new features for multiple platform and firmware
drivers.
- Arm FF-A firmware support gains support for v1.1 specification
features, in particular notification and memory transaction
descriptor changes.
- SCMI firmware support now support v3.2 features for clock and DVFS
configuration and a new transport for Qualcomm platforms.
- Minor cleanups and bugfixes are added to pretty much all the active
platforms: qualcomm, broadcom, dove, ti-k3, rockchip, sifive,
amlogic, atmel, tegra, aspeed, vexpress, mediatek, samsung and
more.
In particular, this contains portions of the treewide conversion to
use __counted_by annotations and the device_get_match_data helper"
* tag 'soc-drivers-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (156 commits)
soc: qcom: pmic_glink_altmode: Print return value on error
firmware: qcom: scm: remove unneeded 'extern' specifiers
firmware: qcom: scm: add a missing forward declaration for struct device
firmware: qcom: move Qualcomm code into its own directory
soc: samsung: exynos-chipid: Convert to platform remove callback returning void
soc: qcom: apr: Add __counted_by for struct apr_rx_buf and use struct_size()
soc: qcom: pmic_glink: fix connector type to be DisplayPort
soc: ti: k3-socinfo: Avoid overriding return value
soc: ti: k3-socinfo: Fix typo in bitfield documentation
soc: ti: knav_qmss_queue: Use device_get_match_data()
firmware: ti_sci: Use device_get_match_data()
firmware: qcom: qseecom: add missing include guards
soc/pxa: ssp: Convert to platform remove callback returning void
soc/mediatek: mtk-mmsys: Convert to platform remove callback returning void
soc/mediatek: mtk-devapc: Convert to platform remove callback returning void
soc/loongson: loongson2_guts: Convert to platform remove callback returning void
soc/litex: litex_soc_ctrl: Convert to platform remove callback returning void
soc/ixp4xx: ixp4xx-qmgr: Convert to platform remove callback returning void
soc/ixp4xx: ixp4xx-npe: Convert to platform remove callback returning void
soc/hisilicon: kunpeng_hccs: Convert to platform remove callback returning void
...
clk framework changes for the merge window. The core framework changes
are only improving the debugfs interface to allow phase adjustments and
report which consumers of a clk there are. These are most likely only of
interest to kernel developers.
On the clk driver side, it's a ghastly amount of updates with only a
handful of new clk drivers. We have a couple new clk drivers for
Qualcomm, per usual, and a driver for Renesas, Amlogic, and TI
respectively. The updates are spread throughout the clk drivers. Some
highlights are fixing kunit tests for different configurations like
lockdep and big-endian, avoiding integer overflow in rate settable clks,
moving clk_hw_onecell_data to the end of allocations so that drivers
don't corrupt their private data, and migrating clk drivers to the
regmap maple tree. Otherwise it's the usual fixes to clk drivers that
only come along with testing the drivers on real hardware.
New Drivers:
- Add clock driver for TWL6032
- Initial support for the Qualcomm SM4450 Global Clock Controller and
SM4450 RPMh clock controllers
- Add Camera Clock Controller on Qualcomm SM8550
- Add support for the Renesas RZ/G3S (R9A08G045) SoC
- Add Amlogic s4 main clock controller support
Updates:
- Make clk kunit tests work with lockdep
- Fix clk gate kunit test for big-endian
- Convert more than a handful of clk drivers to use regmap maple tree
- Consider the CLK_FRAC_DIVIDER_ZERO_BASED in fractional divider clk
implementation
- Add consumer info to clk debugfs
- Fix various clk drivers that have clk_hw_onecell_data not at the end
of an allocation
- Drop CLK_SET_RATE_PARENT for clocks with fixed-rate GPLLs across a
variety of Qualcomm IPQ platforms
- Add missing parent of APCS PLL on Qualcomm IPQ6018
- Add I2C QUP6 clk on Qualcomm IPQ6018 but mark it critical to avoid
problems with RPM
- Implement safe source switching for a53pll and use on Qualcomm
IPQ5332
- Add support for Stromer Plus PLLs to Qualcomm clk driver
- Switch Qualcomm SM8550 Video and GPU clock controllers to use OLE PLL
configure method
- Non critical fixes to halt bit checks in Qualcomm clk drivers
- Add SMMU GDSC for Qualcomm MSM8998
- Fix possible integer overflow in Qualcomm RCG frequency calculation
code
- Remove RPM managed clks from Qualcomm MSM8996 GCC driver
- Add HFPLL configuration for the three HFPLLs in Qualcomm MSM8976
- Switch Qualcomm MSM8996 CBF clock driver's remove function to return
void
- Fix missing dependency for s4 clock controllers
- Select MXC_CLK when building in the CLK_IMX8QXP
- Fixes for error handling paths in i.MX8 ACM driver
- Move the clocks check in i.MX8 ACM driver in order to log any error
- Drop the unused return value of clk_imx_acm_detach_pm_domains
- Drop non-existant IMX8MP_CLK_AUDIOMIX_PDM_ROOT clock
- Fix error handling in i.MX8MQ clock driver
- Allow a different LCDIF1 clock parent if DT describes it for i.MX6SX
- Keep the SCU resource table sorted in the i.MX8DXL rsrc driver
- Move the elcdif PLL clock registration above lcd_clk, as it is its
parent
- Correct some ENET specific clocks for i.MX8DXL platform
- Drop the VPU_UART and VPUCORE from i.MX8QM as latest HW revision
doesn't have them
- Remove "de-featured" MLB support from i.MX8QM/QXP/DXL platforms
- Skip registering clocks owned by Cortex-A partition SCU-based
platforms
- Add CAN_1/2 to i.MX8QM and M4_0, PI_0_PWM_0 and PI_0_I2C_0 to
i.MX8QXP resources
-----BEGIN PGP SIGNATURE-----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=ZxE7
-----END PGP SIGNATURE-----
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk driver updates from Stephen Boyd:
"Herein lies a smallish collection of clk driver updates and some core
clk framework changes for the merge window. The core framework changes
are only improving the debugfs interface to allow phase adjustments
and report which consumers of a clk there are. These are most likely
only of interest to kernel developers.
On the clk driver side, it's a ghastly amount of updates with only a
handful of new clk drivers. We have a couple new clk drivers for
Qualcomm, per usual, and a driver for Renesas, Amlogic, and TI
respectively. The updates are spread throughout the clk drivers.
Some highlights are fixing kunit tests for different configurations
like lockdep and big-endian, avoiding integer overflow in rate
settable clks, moving clk_hw_onecell_data to the end of allocations so
that drivers don't corrupt their private data, and migrating clk
drivers to the regmap maple tree. Otherwise it's the usual fixes to
clk drivers that only come along with testing the drivers on real
hardware.
New Drivers:
- Add clock driver for TWL6032
- Initial support for the Qualcomm SM4450 Global Clock Controller and
SM4450 RPMh clock controllers
- Add Camera Clock Controller on Qualcomm SM8550
- Add support for the Renesas RZ/G3S (R9A08G045) SoC
- Add Amlogic s4 main clock controller support
Updates:
- Make clk kunit tests work with lockdep
- Fix clk gate kunit test for big-endian
- Convert more than a handful of clk drivers to use regmap maple tree
- Consider the CLK_FRAC_DIVIDER_ZERO_BASED in fractional divider clk
implementation
- Add consumer info to clk debugfs
- Fix various clk drivers that have clk_hw_onecell_data not at the
end of an allocation
- Drop CLK_SET_RATE_PARENT for clocks with fixed-rate GPLLs across a
variety of Qualcomm IPQ platforms
- Add missing parent of APCS PLL on Qualcomm IPQ6018
- Add I2C QUP6 clk on Qualcomm IPQ6018 but mark it critical to avoid
problems with RPM
- Implement safe source switching for a53pll and use on Qualcomm
IPQ5332
- Add support for Stromer Plus PLLs to Qualcomm clk driver
- Switch Qualcomm SM8550 Video and GPU clock controllers to use OLE
PLL configure method
- Non critical fixes to halt bit checks in Qualcomm clk drivers
- Add SMMU GDSC for Qualcomm MSM8998
- Fix possible integer overflow in Qualcomm RCG frequency calculation
code
- Remove RPM managed clks from Qualcomm MSM8996 GCC driver
- Add HFPLL configuration for the three HFPLLs in Qualcomm MSM8976
- Switch Qualcomm MSM8996 CBF clock driver's remove function to
return void
- Fix missing dependency for s4 clock controllers
- Select MXC_CLK when building in the CLK_IMX8QXP
- Fixes for error handling paths in i.MX8 ACM driver
- Move the clocks check in i.MX8 ACM driver in order to log any error
- Drop the unused return value of clk_imx_acm_detach_pm_domains
- Drop non-existant IMX8MP_CLK_AUDIOMIX_PDM_ROOT clock
- Fix error handling in i.MX8MQ clock driver
- Allow a different LCDIF1 clock parent if DT describes it for
i.MX6SX
- Keep the SCU resource table sorted in the i.MX8DXL rsrc driver
- Move the elcdif PLL clock registration above lcd_clk, as it is its
parent
- Correct some ENET specific clocks for i.MX8DXL platform
- Drop the VPU_UART and VPUCORE from i.MX8QM as latest HW revision
doesn't have them
- Remove "de-featured" MLB support from i.MX8QM/QXP/DXL platforms
- Skip registering clocks owned by Cortex-A partition SCU-based
platforms
- Add CAN_1/2 to i.MX8QM and M4_0, PI_0_PWM_0 and PI_0_I2C_0 to
i.MX8QXP resources"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (128 commits)
clk: Fix clk gate kunit test on big-endian CPUs
clk: si521xx: Increase stack based print buffer size in probe
clk: mediatek: fix double free in mtk_clk_register_pllfh()
clk: socfpga: agilex: Add bounds-checking coverage for struct stratix10_clock_data
clk: socfpga: Fix undefined behavior bug in struct stratix10_clock_data
clk: sifive: Allow building the driver as a module
clk: analogbits: Allow building the library as a module
clk: sprd: Composite driver support offset config
clk: Allow phase adjustment from debugfs
clk: Show active consumers of clocks in debugfs
clk: Use device_get_match_data()
clk: visconti: Add bounds-checking coverage for struct visconti_pll_provider
clk: visconti: Fix undefined behavior bug in struct visconti_pll_provider
clk: cdce925: Extend match support for OF tables
clk: si570: Simplify probe
clk: si5351: Simplify probe
clk: rs9: Use i2c_get_match_data() instead of device_get_match_data()
clk: clk-si544: Simplify probe() and is_valid_frequency()
clk: si521xx: Use i2c_get_match_data() instead of device_get_match_data()
clk: meson: S4: select CONFIG_COMMON_CLK_MESON_CLKC_UTILS
...
- Make clk kunit tests work with lockdep
- Fix clk gate kunit test for big-endian
- Convert more than a handful of clk drivers to use regmap maple tree
- Consider the CLK_FRAC_DIVIDER_ZERO_BASED in fractional divider clk
implementation
* clk-renesas: (23 commits)
clk: renesas: r9a08g045: Add clock and reset support for SDHI1 and SDHI2
clk: renesas: rzg2l: Use %x format specifier to print CLK_ON_R()
clk: renesas: Add minimal boot support for RZ/G3S SoC
clk: renesas: rzg2l: Add divider clock for RZ/G3S
clk: renesas: rzg2l: Refactor SD mux driver
clk: renesas: rzg2l: Remove CPG_SDHI_DSEL from generic header
clk: renesas: rzg2l: Add struct clk_hw_data
clk: renesas: rzg2l: Add support for RZ/G3S PLL
clk: renesas: rzg2l: Remove critical area
clk: renesas: rzg2l: Fix computation formula
clk: renesas: rzg2l: Trust value returned by hardware
clk: renesas: rzg2l: Lock around writes to mux register
clk: renesas: rzg2l: Wait for status bit of SD mux before continuing
clk: renesas: rcar-gen3: Extend SDnH divider table
dt-bindings: clock: renesas,rzg2l-cpg: Document RZ/G3S SoC
clk: renesas: r8a7795: Constify r8a7795_*_clks
clk: renesas: r9a06g032: Name anonymous structs
clk: renesas: r9a06g032: Fix kerneldoc warning
clk: renesas: rzg2l: Use u32 for flag and mux_flags
clk: renesas: rzg2l: Use FIELD_GET() for PLL register fields
...
* clk-kunit:
clk: Fix clk gate kunit test on big-endian CPUs
clk: Parameterize clk_leaf_mux_set_rate_parent
clk: Drive clk_leaf_mux_set_rate_parent test from clk_ops
* clk-regmap:
clk: versaclock7: Convert to use maple tree register cache
clk: versaclock5: Convert to use maple tree register cache
clk: versaclock3: Convert to use maple tree register cache
clk: versaclock3: Remove redundant _is_writeable()
clk: si570: Convert to use maple tree register cache
clk: si544: Convert to use maple tree register cache
clk: si5351: Convert to use maple tree register cache
clk: si5341: Convert to use maple tree register cache
clk: si514: Convert to use maple tree register cache
clk: cdce925: Convert to use maple tree register cache
* clk-frac-divider:
clk: fractional-divider: tests: Add test suite for edge cases
clk: fractional-divider: Improve approximation when zero based and export
- Add consumer info to clk debugfs
- Fix various clk drivers that have clk_hw_onecell_data not at the end
of an allocation
* clk-debugfs:
clk: Allow phase adjustment from debugfs
clk: Show active consumers of clocks in debugfs
* clk-spreadtrum:
clk: sprd: Composite driver support offset config
* clk-sifive:
clk: sifive: Allow building the driver as a module
clk: analogbits: Allow building the library as a module
* clk-counted:
clk: socfpga: agilex: Add bounds-checking coverage for struct stratix10_clock_data
clk: socfpga: Fix undefined behavior bug in struct stratix10_clock_data
clk: visconti: Add bounds-checking coverage for struct visconti_pll_provider
clk: visconti: Fix undefined behavior bug in struct visconti_pll_provider
* clk-qcom: (36 commits)
clk: qcom: apss-ipq6018: add the GPLL0 clock also as clock provider
clk: qcom: ipq5332: drop the CLK_SET_RATE_PARENT flag from GPLL clocks
clk: qcom: ipq9574: drop the CLK_SET_RATE_PARENT flag from GPLL clocks
clk: qcom: ipq5018: drop the CLK_SET_RATE_PARENT flag from GPLL clocks
clk: qcom: ipq6018: drop the CLK_SET_RATE_PARENT flag from PLL clocks
clk: qcom: ipq8074: drop the CLK_SET_RATE_PARENT flag from PLL clocks
clk: qcom: gcc-ipq6018: add QUP6 I2C clock
clk: qcom: apss-ipq6018: ipq5332: add safe source switch for a53pll
clk: qcom: apss-ipq-pll: Fix 'l' value for ipq5332_pll_config
clk: qcom: apss-ipq-pll: Use stromer plus ops for stromer plus pll
clk: qcom: clk-alpha-pll: introduce stromer plus ops
clk: qcom: config IPQ_APSS_6018 should depend on QCOM_SMEM
clk: qcom: videocc-sm8550: switch to clk_lucid_ole_pll_configure
clk: qcom: gpucc-sm8550: switch to clk_lucid_ole_pll_configure
clk: qcom: Replace of_device.h with explicit includes
clk: qcom: smd-rpm: Move CPUSS_GNoC clock to interconnect
clk: qcom: cbf-msm8996: Convert to platform remove callback returning void
clk: qcom: gcc-sm8150: Fix gcc_sdcc2_apps_clk_src
clk: qcom: Add GCC driver support for SM4450
dt-bindings: clock: qcom: Add GCC clocks for SM4450
...
- Avoid an oops in possible_parent_show() by checking for no parent
properly when a DT index based lookup is used
- Handle errors returned from divider_ro_round_rate() in
clk_stm32_composite_determine_rate()
- Fix clk_ops::determine_rate() implementation of socfpga's gateclk_ops
that was ruining uart output because the divider was forgotten about
-----BEGIN PGP SIGNATURE-----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=Hghf
-----END PGP SIGNATURE-----
Merge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fixes from Stephen Boyd:
"Three fixes, one for the clk framework and two for clk drivers:
- Avoid an oops in possible_parent_show() by checking for no parent
properly when a DT index based lookup is used
- Handle errors returned from divider_ro_round_rate() in
clk_stm32_composite_determine_rate()
- Fix clk_ops::determine_rate() implementation of socfpga's
gateclk_ops that was ruining uart output because the divider
was forgotten about"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: stm32: Fix a signedness issue in clk_stm32_composite_determine_rate()
clk: Sanitize possible_parent_show to Handle Return Value of of_clk_get_parent_name
clk: socfpga: gate: Account for the divider in determine_rate
The clk gate kunit test checks that the implementation of the basic clk
gate reads and writes the proper bits in an MMIO register. The
implementation of the basic clk gate type uses writel() and readl()
which operate on little-endian registers. This test fails on big-endian
CPUs because the clk gate implementation writes to 'fake_reg' with
writel(), which converts the value to be written to little-endian before
storing the value in the fake register. When the test checks the bits in
the fake register on a big-endian machine it falsely assumes the format
of the register is also big-endian, when it is really always
little-endian. Suffice to say things don't work very well.
Mark 'fake_reg' as __le32 and push through endian accessor fixes
wherever the value is inspected to make this test endian agnostic.
There's a CLK_GATE_BIG_ENDIAN flag for big-endian MMIO devices, which
this test isn't using. A follow-up patch will test with and without that
flag.
Reported-by: Boqun Feng <boqun.feng@gmail.com>
Closes: https://lore.kernel.org/r/ZTLH5o0GlFBYsAHq@boqun-archlinux
Tested-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20231027225821.95833-1-sboyd@kernel.org
Increase the size of temporary print buffer on stack to fix the
following warnings reported by LKP.
Since all the input parameters of snprintf() are under control
of this driver, it is not possible to trigger and overflow here,
but since the print buffer is on stack and discarded once driver
probe() finishes, it is not an issue to increase it by 10 bytes
and fix the warning in the process. Make it so.
"
drivers/clk/clk-si521xx.c: In function 'si521xx_probe':
>> drivers/clk/clk-si521xx.c:318:26: warning: '%d' directive output may be truncated writing between 1 and 10 bytes into a region of size 2 [-Wformat-truncation=]
snprintf(name, 6, "DIFF%d", i);
^~
drivers/clk/clk-si521xx.c:318:21: note: directive argument in the range [0, 2147483647]
snprintf(name, 6, "DIFF%d", i);
^~~~~~~~
drivers/clk/clk-si521xx.c:318:3: note: 'snprintf' output between 6 and 15 bytes into a destination of size 6
snprintf(name, 6, "DIFF%d", i);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
"
Fixes: edc12763a3 ("clk: si521xx: Clock driver for Skyworks Si521xx I2C PCIe clock generators")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202310260412.AGASjFN4-lkp@intel.com/
Signed-off-by: Marek Vasut <marex@denx.de>
Link: https://lore.kernel.org/r/20231027085840.30098-1-marex@denx.de
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The mtk_clk_register_pll_ops() currently frees the "pll" parameter.
The function has two callers, mtk_clk_register_pll() and
mtk_clk_register_pllfh(). The first one, the _pll() function relies on
the free, but for the second _pllfh() function it causes a double free
bug.
Really the frees should be done in the caller because that's where
the allocation is.
Fixes: d7964de8a8 ("clk: mediatek: Add new clock driver to handle FHCTL hardware")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/cd7fa365-28cc-4c34-ac64-6da57c98baa6@moroto.mountain
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
In order to gain the bounds-checking coverage that __counted_by provides
to flexible-array members at run-time via CONFIG_UBSAN_BOUNDS (for array
indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family functions),
we must make sure that the counter member, in this case `num`, is updated
before the first access to the flex-array member, in this case array `hws`.
commit f316cdff8d ("clk: Annotate struct clk_hw_onecell_data with
__counted_by") introduced `__counted_by` for `struct clk_hw_onecell_data`
together with changes to relocate some of assignments of counter `num`
before `hws` is accessed:
include/linux/clk-provider.h:
1380 struct clk_hw_onecell_data {
1381 unsigned int num;
1382 struct clk_hw *hws[] __counted_by(num);
1383 };
However, this structure is used as a member in other structs, in this
case in `struct sstratix10_clock_data`:
drivers/clk/socfpga/stratix10-clk.h:
9 struct stratix10_clock_data {
10 void __iomem *base;
11
12 /* Must be last */
13 struct clk_hw_onecell_data clk_data;
14 };
Hence, we need to move the assignments to `clk_data->clk_data.num` after
allocations for `struct stratix10_clock_data` and before accessing the
flexible array `clk_data->clk_data.hws`. And, as assignments for both
`clk_data->clk_data.num` and `clk_data->base` are originally adjacent to
each other, relocate both assignments together.
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/385c516c498e07eb9a521107e16a7efd26e86ea5.1698117815.git.gustavoars@kernel.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
`struct clk_hw_onecell_data` is a flexible structure, which means that
it contains flexible-array member at the bottom, in this case array
`hws`:
include/linux/clk-provider.h:
1380 struct clk_hw_onecell_data {
1381 unsigned int num;
1382 struct clk_hw *hws[] __counted_by(num);
1383 };
This could potentially lead to an overwrite of the objects following
`clk_data` in `struct stratix10_clock_data`, in this case
`void __iomem *base;` at run-time:
drivers/clk/socfpga/stratix10-clk.h:
9 struct stratix10_clock_data {
10 struct clk_hw_onecell_data clk_data;
11 void __iomem *base;
12 };
There are currently three different places where memory is allocated for
`struct stratix10_clock_data`, including the flex-array `hws` in
`struct clk_hw_onecell_data`:
drivers/clk/socfpga/clk-agilex.c:
469 clk_data = devm_kzalloc(dev, struct_size(clk_data, clk_data.hws,
470 num_clks), GFP_KERNEL);
drivers/clk/socfpga/clk-agilex.c:
509 clk_data = devm_kzalloc(dev, struct_size(clk_data, clk_data.hws,
510 num_clks), GFP_KERNEL);
drivers/clk/socfpga/clk-s10.c:
400 clk_data = devm_kzalloc(dev, struct_size(clk_data, clk_data.hws,
401 num_clks), GFP_KERNEL);
I'll use just one of them to describe the issue. See below.
Notice that a total of 440 bytes are allocated for flexible-array member
`hws` at line 469:
include/dt-bindings/clock/agilex-clock.h:
70 #define AGILEX_NUM_CLKS 55
drivers/clk/socfpga/clk-agilex.c:
459 struct stratix10_clock_data *clk_data;
460 void __iomem *base;
...
466
467 num_clks = AGILEX_NUM_CLKS;
468
469 clk_data = devm_kzalloc(dev, struct_size(clk_data, clk_data.hws,
470 num_clks), GFP_KERNEL);
`struct_size(clk_data, clk_data.hws, num_clks)` above translates to
sizeof(struct stratix10_clock_data) + sizeof(struct clk_hw *) * 55 ==
16 + 8 * 55 == 16 + 440
^^^
|
allocated bytes for flex-array `hws`
474 for (i = 0; i < num_clks; i++)
475 clk_data->clk_data.hws[i] = ERR_PTR(-ENOENT);
476
477 clk_data->base = base;
and then some data is written into both `hws` and `base` objects.
Fix this by placing the declaration of object `clk_data` at the end of
`struct stratix10_clock_data`. Also, add a comment to make it clear
that this object must always be last in the structure.
-Wflex-array-member-not-at-end is coming in GCC-14, and we are getting
ready to enable it globally.
Fixes: ba7e258425 ("clk: socfpga: Convert to s10/agilex/n5x to use clk_hw")
Cc: stable@vger.kernel.org
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/1da736106d8e0806aeafa6e471a13ced490eae22.1698117815.git.gustavoars@kernel.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
This library is only used by the SiFive PRCI driver. When that driver is
built as a module, it makes sense to build this library as a module too.
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Link: https://lore.kernel.org/r/20230725004248.381868-1-samuel.holland@sifive.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The composite interface support the offset configuration,
which is used to support mux and div in different registers.
Because some sprd projects, the divider has different
addresses from mux for one composite clk.
Signed-off-by: Zhifeng Tang <zhifeng.tang@unisoc.com>
Reviewed-by: Chunyan Zhang <zhang.lyra@gmail.com>
Link: https://lore.kernel.org/r/20230913115211.11512-1-zhifeng.tang@unisoc.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
For testing it may be useful to manually adjust a clock's phase. Add
support for writing to the existing clk_phase debugfs file, with the
written value clamped to [0, 360) to match the behaviour of the
clk_set_phase() function.
This is a dangerous feature, so use the existing define
CLOCK_ALLOW_WRITE_DEBUGFS to allow it only if the source is modified.
Signed-off-by: John Keeping <john@metanate.com>
Link: https://lore.kernel.org/r/20230420103805.125246-1-john@metanate.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Use preferred device_get_match_data() instead of of_match_device() to
get the driver match data. With this, adjust the includes to explicitly
include the correct headers.
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20231006213959.334439-1-robh@kernel.org
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> #msm part
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> # Samsung
Acked-by: David Lechner <david@lechnology.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
In order to gain the bounds-checking coverage that __counted_by provides
to flexible-array members at run-time via CONFIG_UBSAN_BOUNDS (for array
indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family functions),
we must make sure that the counter member, in this particular case `num`,
is updated before the first access to the flex-array member, in this
particular case array `hws`. See below:
commit f316cdff8d ("clk: Annotate struct clk_hw_onecell_data with
__counted_by") introduced `__counted_by` for `struct clk_hw_onecell_data`
together with changes to relocate some of assignments of counter `num`
before `hws` is accessed:
include/linux/clk-provider.h:
1380 struct clk_hw_onecell_data {
1381 unsigned int num;
1382 struct clk_hw *hws[] __counted_by(num);
1383 };
However, this structure is used as a member in other structs, in this
case in `struct visconti_pll_provider`:
drivers/clk/visconti/pll.h:
16 struct visconti_pll_provider {
17 void __iomem *reg_base;
18 struct device_node *node;
19
20 /* Must be last */
21 struct clk_hw_onecell_data clk_data;
22 };
Hence, we need to move the assignments to `ctx->clk_data.num` after
allocation for `struct visconti_pll_provider` and before accessing the
flexible array `ctx->clk_data.hws`. And, as assignments for all members
in `struct visconti_pll_provider` are originally adjacent to each other,
relocate all assignments together, so we don't split up
`ctx->clk_data.hws = nr_plls` from the rest. :)
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/e3189f3e40e8723b6d794fb2260e2e9ab6b960bd.1697492890.git.gustavoars@kernel.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
`struct clk_hw_onecell_data` is a flexible structure, which means that
it contains flexible-array member at the bottom, in this case array
`hws`:
include/linux/clk-provider.h:
1380 struct clk_hw_onecell_data {
1381 unsigned int num;
1382 struct clk_hw *hws[] __counted_by(num);
1383 };
This could potentially lead to an overwrite of the objects following
`clk_data` in `struct visconti_pll_provider`, in this case
`struct device_node *node;`, at run-time:
drivers/clk/visconti/pll.h:
16 struct visconti_pll_provider {
17 void __iomem *reg_base;
18 struct clk_hw_onecell_data clk_data;
19 struct device_node *node;
20 };
Notice that a total of 56 bytes are allocated for flexible-array `hws`
at line 328. See below:
include/dt-bindings/clock/toshiba,tmpv770x.h:
14 #define TMPV770X_NR_PLL 7
drivers/clk/visconti/pll-tmpv770x.c:
69 ctx = visconti_init_pll(np, reg_base, TMPV770X_NR_PLL);
drivers/clk/visconti/pll.c:
321 struct visconti_pll_provider * __init visconti_init_pll(struct device_node *np,
322 void __iomem *base,
323 unsigned long nr_plls)
324 {
325 struct visconti_pll_provider *ctx;
...
328 ctx = kzalloc(struct_size(ctx, clk_data.hws, nr_plls), GFP_KERNEL);
`struct_size(ctx, clk_data.hws, nr_plls)` above translates to
sizeof(struct visconti_pll_provider) + sizeof(struct clk_hw *) * 7 ==
24 + 8 * 7 == 24 + 56
^^^^
|
allocated bytes for flex array `hws`
$ pahole -C visconti_pll_provider drivers/clk/visconti/pll.o
struct visconti_pll_provider {
void * reg_base; /* 0 8 */
struct clk_hw_onecell_data clk_data; /* 8 8 */
struct device_node * node; /* 16 8 */
/* size: 24, cachelines: 1, members: 3 */
/* last cacheline: 24 bytes */
};
And then, after the allocation, some data is written into all members
of `struct visconti_pll_provider`:
332 for (i = 0; i < nr_plls; ++i)
333 ctx->clk_data.hws[i] = ERR_PTR(-ENOENT);
334
335 ctx->node = np;
336 ctx->reg_base = base;
337 ctx->clk_data.num = nr_plls;
Fix all these by placing the declaration of object `clk_data` at the
end of `struct visconti_pll_provider`. Also, add a comment to make it
clear that this object must always be last in the structure, and
prevent this bug from being introduced again in the future.
-Wflex-array-member-not-at-end is coming in GCC-14, and we are getting
ready to enable it globally.
Fixes: b4cbe606dc ("clk: visconti: Add support common clock driver and reset driver")
Cc: stable@vger.kernel.org
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/57a831d94ee2b3889b11525d4ad500356f89576f.1697492890.git.gustavoars@kernel.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The driver has an OF match table, still, it uses an ID lookup table for
retrieving match data. Currently, the driver is working on the
assumption that an I2C device registered via OF will always match a
legacy I2C device ID. The correct approach is to have an OF device ID
table using i2c_get_match_data() if the devices are registered via OF/ID.
Unify the OF/ID table by using struct clk_cdce925_chip_info
as match data for both these tables and replace the ID lookup table for
the match data by i2c_get_match_data().
Split the array clk_cdce925_chip_info_tbl[] as individual variables, and
make lines shorter by referring to e.g. &clk_cdce913_info instead of
&clk_cdce925_chip_info_tbl[CDCE913].
Drop enum related to chip type as there is no user.
While at it, remove the trailing comma in the terminator entry for the OF
table making code robust against (theoretical) misrebases or other similar
things where the new entry goes _after_ the termination without the
compiler noticing.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20230909150516.10353-1-biju.das.jz@bp.renesas.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The driver has an OF match table, still, it uses an ID lookup table for
retrieving match data. Currently, the driver is working on the
assumption that an I2C device registered via OF will always match a
legacy I2C device ID. The correct approach is to have an OF device ID
table using i2c_get_match_data() if the devices are registered via OF/ID.
Unify the OF/ID table by adding struct clk_si570_info as match data
instead of clk_si570_variant and replace the ID lookup table for
the match data by i2c_get_match_data(). This allows to simplify
probe().
Drop enum clk_si570_variant as there is no user.
While at it, remove the trailing comma in the terminator entry for the OF
table making code robust against (theoretical) misrebases or other similar
things where the new entry goes _after_ the termination without the
compiler noticing.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20230909164738.47708-1-biju.das.jz@bp.renesas.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The driver has an OF match table, still, it uses an ID lookup table for
retrieving match data. Currently, the driver is working on the
assumption that an I2C device registered via OF will always match a
legacy I2C device ID. The correct approach is to have an OF device ID
table using i2c_get_match_data() if the devices are registered via OF/ID.
Simplify probe() by replacing ID lookup table for retrieving match data
with i2c_get_match_data().
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20230909162047.41845-1-biju.das.jz@bp.renesas.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The device_get_match_data(), is to get match data for firmware interfaces
such as just OF/ACPI. This driver has I2C matching table as well. Use
i2c_get_match_data() to get match data for I2C, ACPI and DT-based
matching.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20230909160218.33078-1-biju.das.jz@bp.renesas.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The driver has an OF match table, still, it uses an ID lookup table for
retrieving match data. Currently, the driver is working on the
assumption that an I2C device registered via OF will always match a
legacy I2C device ID. The correct approach is to have an OF device ID
table using i2c_get_match_data() if the devices are registered via OF/ID.
Unify the OF/ID table by using max_freq as match data instead of
enum si544_speed_grade and replace the ID lookup table for
the match data by i2c_get_match_data(). This allows to simplify both
probe() and is_valid_frequency().
Drop enum si544_speed_grade as there is no user.
While at it, remove the trailing comma in the terminator entry for the OF
table making code robust against (theoretical) misrebases or other similar
things where the new entry goes _after_ the termination without the
compiler noticing.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20230909155418.24426-1-biju.das.jz@bp.renesas.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The device_get_match_data(), is to get match data for firmware interfaces
such as just OF/ACPI. This driver has I2C matching table as well. Use
i2c_get_match_data() to get match data for I2C, ACPI and DT-based
matching.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20230909152847.16216-1-biju.das.jz@bp.renesas.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Without this, the newly added drivers fail to link:
aarch64-linux-ld: drivers/clk/meson/s4-pll.o: in function `meson_s4_pll_probe':
s4-pll.c:(.text+0x13c): undefined reference to `meson_clk_hw_get'
aarch64-linux-ld: drivers/clk/meson/s4-peripherals.o: in function `meson_s4_periphs_probe':
s4-peripherals.c:(.text+0xb0): undefined reference to `meson_clk_hw_get'
Fixes: e787c9c55e ("clk: meson: S4: add support for Amlogic S4 SoC PLL clock driver")
Reviewed-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20231023102810.4001943-1-arnd@kernel.org
[jbrunet: use 12 char for the Fixes as recommended ]
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
While the kernel is booting up, APSS PLL will be running at 800MHz with
GPLL0 as source. Once the cpufreq driver is available, APSS PLL will be
configured and select the rate based on the opp table and the source will
be changed to APSS_PLL_EARLY.
Without this patch, CPU Freq driver reports that CPU is running at 24MHz
instead of the 800MHz.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Tested-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: Kathiravan Thirumoorthy <quic_kathirav@quicinc.com>
Link: https://lore.kernel.org/r/20230913-gpll_cleanup-v2-7-c8ceb1a37680@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
GPLL clock rates are fixed and shouldn't be scaled based on the
request from dependent clocks. Doing so will result in the unexpected
behaviour. So drop the CLK_SET_RATE_PARENT flag from the GPLL clocks.
Fixes: 3d89d52970 ("clk: qcom: add Global Clock controller (GCC) driver for IPQ5332 SoC")
Signed-off-by: Kathiravan Thirumoorthy <quic_kathirav@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230913-gpll_cleanup-v2-5-c8ceb1a37680@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
GPLL clock rates are fixed and shouldn't be scaled based on the request
from dependent clocks. Doing so will result in the unexpected behaviour.
So drop the CLK_SET_RATE_PARENT flag from the GPLL clocks.
----
Changes in V2:
- No changes
Fixes: d75b82cff4 ("clk: qcom: Add Global Clock Controller driver for IPQ9574")
Signed-off-by: Kathiravan Thirumoorthy <quic_kathirav@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230913-gpll_cleanup-v2-4-c8ceb1a37680@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
GPLL clock rates are fixed and shouldn't be scaled based on the
request from dependent clocks. Doing so will result in the unexpected
behaviour. So drop the CLK_SET_RATE_PARENT flag from the GPLL clocks.
----
Changes in V2:
- New patch
Fixes: e3fdbef1ba ("clk: qcom: Add Global Clock controller (GCC) driver for IPQ5018")
Signed-off-by: Kathiravan Thirumoorthy <quic_kathirav@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230913-gpll_cleanup-v2-3-c8ceb1a37680@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
GPLL, NSS crypto PLL clock rates are fixed and shouldn't be scaled based
on the request from dependent clocks. Doing so will result in the
unexpected behaviour. So drop the CLK_SET_RATE_PARENT flag from the PLL
clocks.
Cc: stable@vger.kernel.org
Fixes: d9db07f088 ("clk: qcom: Add ipq6018 Global Clock Controller support")
Signed-off-by: Kathiravan Thirumoorthy <quic_kathirav@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230913-gpll_cleanup-v2-2-c8ceb1a37680@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
GPLL, NSS crypto PLL clock rates are fixed and shouldn't be scaled based
on the request from dependent clocks. Doing so will result in the
unexpected behaviour. So drop the CLK_SET_RATE_PARENT flag from the PLL
clocks.
Cc: stable@vger.kernel.org
Fixes: b8e7e51962 ("clk: qcom: ipq8074: add remaining PLL’s")
Signed-off-by: Kathiravan Thirumoorthy <quic_kathirav@quicinc.com>
Link: https://lore.kernel.org/r/20230913-gpll_cleanup-v2-1-c8ceb1a37680@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
QUP6 I2C clock is listed in the dt bindings but it was never included in
the GCC driver.
So lets add support for it, it is marked as criticial as it is used by RPM
to communicate to the external PMIC over I2C so this clock must not be
disabled.
Signed-off-by: Robert Marko <robimarko@gmail.com>
Reviewed-by: Kathiravan Thirumoorthy <quic_kathirav@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231021115545.229060-1-robimarko@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Stromer Plus PLL found on IPQ53xx doesn't support dynamic
frequency scaling. To achieve the same, we need to park the APPS
PLL source to GPLL0, re configure the PLL and then switch the
source to APSS_PLL_EARLY.
To support this, register a clock notifier to get the PRE_RATE
and POST_RATE notification. Change the APSS PLL source to GPLL0
when PRE_RATE notification is received, then configure the PLL
and then change back the source to APSS_PLL_EARLY.
Additionally, not all SKUs of IPQ53xx support scaling. Hence,
do the above to the SKUs that support scaling.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com>
Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
Link: https://lore.kernel.org/r/49422d258d67d33a2547fbb7f4f6e72d489c2301.1697781921.git.quic_varada@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The earlier 'l' value of 0x3e is for 1.5GHz. Not all SKUs support
this frequency. Hence set it to 0x2d to get 1.1GHz which is
supported in all SKUs.
The frequency can still increase above this initial configuration
made here when the cpufreq driver picks a different OPP.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Fixes: c7ef7fbb1c ("clk: qcom: apss-ipq-pll: add support for IPQ5332")
Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com>
Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
Link: https://lore.kernel.org/r/00e6be6cb9cee56628123a64ade118d0a752018b.1697781921.git.quic_varada@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The set rate and determine rate operations are different between
Stromer and Stromer Plus PLLs. Since the programming sequence is
different, the PLLs dont get configured properly and random,
inexplicable crash/freeze is seen. Hence, use stromer plus ops
for ipq_pll_stromer_plus.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Fixes: c7ef7fbb1c ("clk: qcom: apss-ipq-pll: add support for IPQ5332")
Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com>
Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
Link: https://lore.kernel.org/r/c86ecaa23dc4f39650bcf4a3bd54a617a932e4fd.1697781921.git.quic_varada@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Stromer plus APSS PLL does not support dynamic frequency scaling.
To switch between frequencies, we have to shut down the PLL,
configure the L and ALPHA values and turn on again. So introduce the
separate set of ops for Stromer Plus PLL.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com>
Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
Link: https://lore.kernel.org/r/2affa6c63ff0c4342230623a7d4eef02ec7c02d4.1697781921.git.quic_varada@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Instead of manually specifying the RINGOSC_CAL_L and CAL_L values in the
alpha_pll_config.l field, use the proper clk_lucid_ole_pll_configure()
function to configure the PLL.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231016084356.1301854-2-dmitry.baryshkov@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Instead of manually specifying the RINGOSC_CAL_L and CAL_L values in the
alpha_pll_config.l field, use the proper clk_lucid_ole_pll_configure()
function to configure the PLL.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231016084356.1301854-1-dmitry.baryshkov@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it as merged into the regular platform bus.
As part of that merge prepping Arm DT support 13 years ago, they
"temporarily" include each other and pull in various other headers. In
preparation to fix this, adjust the includes for what is actually needed.
of_device.h isn't needed, but mod_devicetable.h and platform_device.h were
implicitly included by it.
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20231010205710.1585232-1-robh@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().
qcom_msm8996_cbf_icc_remove() returned zero unconditionally. After
changing this function to return void instead, the driver can be
converted trivially to use .remove_new().
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230911151548.672485-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The TWL6032 has some clock outputs which are controlled like
fixed-voltage regulators, in some drivers for these chips
found in the wild, just the regulator api is abused for controlling
them, so simply use something similar to the regulator functions.
Due to a lack of hardware available for testing, leave out the
TWL6030-specific part of those functions.
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Link: https://lore.kernel.org/r/20230916100515.1650336-5-andreas@kemnade.info
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Add the check for the return value of mtk_alloc_clk_data() in order to
avoid NULL pointer dereference.
Fixes: e986211827 ("clk: mediatek: Add MT2701 clock support")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Link: https://lore.kernel.org/r/20230901024658.23405-1-jiasheng@iscas.ac.cn
Reviewed-by: Markus Schneider-Pargmann <msp@baylibre.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Add the check for the return value of mtk_alloc_clk_data() in order to
avoid NULL pointer dereference.
Fixes: 3b5e748615 ("clk: mediatek: add clock support for MT7629 SoC")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Link: https://lore.kernel.org/r/20230912093407.21505-5-jiasheng@iscas.ac.cn
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Add the check for the return value of mtk_alloc_clk_data() in order to
avoid NULL pointer dereference.
Fixes: 3b5e748615 ("clk: mediatek: add clock support for MT7629 SoC")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Link: https://lore.kernel.org/r/20230912093407.21505-4-jiasheng@iscas.ac.cn
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Add the check for the return value of mtk_alloc_clk_data() in order to
avoid NULL pointer dereference.
Fixes: 96596aa066 ("clk: mediatek: add clk support for MT6797")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Link: https://lore.kernel.org/r/20230912093407.21505-3-jiasheng@iscas.ac.cn
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Add the check for the return value of mtk_alloc_clk_data() in order to
avoid NULL pointer dereference.
Fixes: 710774e048 ("clk: mediatek: Add MT6779 clock support")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Link: https://lore.kernel.org/r/20230912093407.21505-2-jiasheng@iscas.ac.cn
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Add the check for the return value of mtk_alloc_clk_data() in order to
avoid NULL pointer dereference.
Fixes: 1aca9939bf ("clk: mediatek: Add MT6765 clock support")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Link: https://lore.kernel.org/r/20230912093407.21505-1-jiasheng@iscas.ac.cn
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The corresponding allocation is:
> npcm7xx_clk_data = kzalloc(struct_size(npcm7xx_clk_data, hws,
> NPCM7XX_NUM_CLOCKS), GFP_KERNEL);
... so, kfree should be applied to npcm7xx_clk_data, not
npcm7xx_clk_data->hws.
Fixes: fcfd143698 ("clk: npcm7xx: add clock controller")
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Link: https://lore.kernel.org/r/20230923133127.1815621-1-j.neuschaefer@gmx.net
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
This code checks "if (parent_hw)" is non-NULL, but then it has more
checks if parent_hw is non-NULL on the lines inside the if statement.
It is a bit confusing.
For the else statement, keep in mind that at the start of the function
we checked:
if (!(parent_name || parent_hw))
return ERR_PTR(-EINVAL);
That check ensures that if parent_hw is NULL that means that parent_name
is non-NULL. At least one must always be non-NULL. So here again, the
checks inside the if statement can be removed.
In the original code, it was a bit confusing and you could easily get
the impression that "init.num_parents" could be zero. When we remove
the unnecessary checking it's more obvious that it's always set to 1.
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/7782b4f1-deed-49dc-8207-b6ea06d7602f@moroto.mountain
Reviewed-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The "div" pointer is freed in _register_divider() and again in
of_ti_divider_clk_setup(). Delete the free in _register_divider()
Fixes: fbbc185915 ("clk: ti: divider: cleanup _register_divider and ti_clk_get_div_table")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/6d36eeec-6c8a-4f11-a579-aa3cd7c38749@moroto.mountain
Reviewed-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The clk_register_divider() and clk_register_mux() functions returns
error pointers on error but this code checks for NULL. Fix that.
Fixes: b9e0d40c0d ("clk: keystone: add Keystone PLL clock driver")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/d9da4c97-0da9-499f-9a21-1f8e3f148dc1@moroto.mountain
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
When CONFIG_OF is disabled then the matching table is not referenced and
the following warning appears:
drivers/clk/ralink/clk-mtmips.c:821:34: warning: unused variable 'mtmips_of_match' [-Wunused-const-variable]
821 | static const struct of_device_id mtmips_of_match[] = {
| ^
There are two match tables in the driver: one for the clock driver and the
other for the reset driver. The only difference between them is that the
clock driver uses 'data' and does not have 'ralink,rt2880-reset' compatible.
Both just can be merged into a single one just by adding the compatible
'ralink,rt2880-reset' entry to 'mtmips_of_match[]', which will allow it to
be used for 'mtmips_clk_driver' (which doesn't use the data) as well as for
'mtmips_clk_init()' (which doesn't need get called for 'ralink,rt2880-reset').
Doing in this way ensures that 'CONFIG_OF' is not disabled anymore so the
above warning disapears.
Fixes: 6f3b15586e ("clk: ralink: add clock and reset driver for MTMIPS SoCs")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202307242310.CdOnd2py-lkp@intel.com/
Suggested-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Link: https://lore.kernel.org/r/20230827023932.501102-1-sergio.paracuellos@gmail.com
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Regression fixes for mcbsp audio clock, and for ams-delta modem. And two
warning fixes. These all can be merged whenever and are not urgent by any
means. Feel free to defer to the merge window unless other fixes are still
pending.
-----BEGIN PGP SIGNATURE-----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=3fOd
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmUv3acACgkQYKtH/8kJ
UicHDBAAihEPEpnnaEtFgpj6rMmr/2m8pOXykkJliyAM3y9NP+Bt3Ocj3nZzo1ss
iutZnp6JUG2MJlUiE+tK2aWaq+5IxyHv2FABr6LOV/i/OWRj6UhttDf8zbXbTIPx
MZ9pzAa65ErGd7/QyUAvPVPHA9Q+LXk3/JOitFWCwFxrtEAIiyrqucDehyEtv8fn
xFZ3CO0sBjO/UZk8OoWrqwWv/M0Z1AJplEoycHXPc1eqg4zucE3Q9EpkOKHOK3om
m40DJLliEhXGugNWpk2w1bJUpc95xVWedX92+piYCmlszSIJCTXT0DS5WxzpVLOj
2vKg1cnr/G9fFUSPH3qGBnZunN6v9g+kzmdwRGQsZB09M4CIfCY05ef/A0rAfFmU
zQ+3RfY3UT8Po/pN806kFxMljTMpMJ5KzQDPUdZuUX5CuwnmokAoaRYVJkNROVsK
G7U7yPMq8DBXSMn4OVOGU8SVOf0RE9Yk8OlBcv3UL9E3G6v8rwLgnZnFvBLhVtEy
ttgSdcHIENO2Z02mfBOxEryWXN4E0vI4ISzvejM+NVT349YAI+NGbNTuGGT15vla
ZvM6H+a36RYuc4vIsqfMlKZTVNfXIIWb04vu2Qi1SKWCyd0UUUw8ig2GpjE2pRWv
8fbbWaOckzjGo4b1HbPqN3iKwnpVlCD3jT0FjIP8E1M7ZC/6pM8=
=u4lX
-----END PGP SIGNATURE-----
Merge tag 'omap-fixes-audio-clock-and-modem-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes
Few minor fixes for omaps
Regression fixes for mcbsp audio clock, and for ams-delta modem. And two
warning fixes. These all can be merged whenever and are not urgent by any
means. Feel free to defer to the merge window unless other fixes are still
pending.
* tag 'omap-fixes-audio-clock-and-modem-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
clk: ti: Fix missing omap5 mcbsp functional clock and aliases
clk: ti: Fix missing omap4 mcbsp functional clock and aliases
ARM: OMAP1: ams-delta: Fix MODEM initialization failure
ARM: OMAP: timer32K: fix all kernel-doc warnings
ARM: omap2: fix a debug printk
Link: https://lore.kernel.org/r/pull-1697606314-911862@atomide.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Main additions this time include:
1. SCMI v3.2 clock configuration support:
This helps to retrieve the enabled state of a clock as well as allow
to set OEM specific clock configurations.
2. Support for generic performance scaling(DVFS):
The current SCMI DVFS support is limited to the CPUs in the kernel.
This extension enables it to used for all kind of devices and not
only for the CPUs. It updates the SCMI cpufreq to utilize the power
domain bindings. It also adds a more generic SCMI performance domain
based on the genpd framework that as be used for all the non-CPU
devices.
3. Extend the generic performance scaling(DVFS) support for firmware
driver OPPs:
Consumer drivers for devices that are attached to the SCMI performance
domain can't make use of the current OPP library to scale performance
as the OPPs are firmware driven and often obtained from the firmware
rather than the device tree. These changes extend the generic OPP
and genpd PM domain frameworks to identify and utilise these firmware
driven OPPs.
4. SCMI v3.2 clock parent support:
This enables the support for discovering and changing parent clocks
and extending the SCMI clk driver to use the same.
5. Qualcom SMC/HVC transport support:
The Qualcomm virtual platforms require capability id in the hypervisor
call to identify which doorbell to assert when supporting multiple
SMC/HVC based SCMI transport channels. Extra parameter is added to
support the same and the same is obtained at the fixed address in the
shared memory which is initialised by the firmware.
6. Move the existing SCMI power domain driver under drivers/pmdomain
Apart from the above main changes, it also include couple of minor fixes
and cosmetic reworks.
-----BEGIN PGP SIGNATURE-----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=IbXh
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=u9+1
-----END PGP SIGNATURE-----
Merge tag 'scmi-updates-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into soc/drivers
Arm SCMI updates for v6.7
Main additions this time include:
1. SCMI v3.2 clock configuration support:
This helps to retrieve the enabled state of a clock as well as allow
to set OEM specific clock configurations.
2. Support for generic performance scaling(DVFS):
The current SCMI DVFS support is limited to the CPUs in the kernel.
This extension enables it to used for all kind of devices and not
only for the CPUs. It updates the SCMI cpufreq to utilize the power
domain bindings. It also adds a more generic SCMI performance domain
based on the genpd framework that as be used for all the non-CPU
devices.
3. Extend the generic performance scaling(DVFS) support for firmware
driver OPPs:
Consumer drivers for devices that are attached to the SCMI performance
domain can't make use of the current OPP library to scale performance
as the OPPs are firmware driven and often obtained from the firmware
rather than the device tree. These changes extend the generic OPP
and genpd PM domain frameworks to identify and utilise these firmware
driven OPPs.
4. SCMI v3.2 clock parent support:
This enables the support for discovering and changing parent clocks
and extending the SCMI clk driver to use the same.
5. Qualcom SMC/HVC transport support:
The Qualcomm virtual platforms require capability id in the hypervisor
call to identify which doorbell to assert when supporting multiple
SMC/HVC based SCMI transport channels. Extra parameter is added to
support the same and the same is obtained at the fixed address in the
shared memory which is initialised by the firmware.
6. Move the existing SCMI power domain driver under drivers/pmdomain
Apart from the above main changes, it also include couple of minor fixes
and cosmetic reworks.
* tag 'scmi-updates-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux: (37 commits)
firmware: arm_scmi: Add qcom smc/hvc transport support
dt-bindings: arm: Add new compatible for smc/hvc transport for SCMI
firmware: arm_scmi: Convert u32 to unsigned long to align with arm_smccc_1_1_invoke()
clk: scmi: Add support for clock {set,get}_parent
firmware: arm_scmi: Add support for clock parents
clk: scmi: Free scmi_clk allocated when the clocks with invalid info are skipped
firmware: arm_scpi: Use device_get_match_data()
firmware: arm_scmi: Add generic OPP support to the SCMI performance domain
firmware: arm_scmi: Specify the performance level when adding an OPP
firmware: arm_scmi: Simplify error path in scmi_dvfs_device_opps_add()
OPP: Extend support for the opp-level beyond required-opps
OPP: Switch to use dev_pm_domain_set_performance_state()
OPP: Extend dev_pm_opp_data with a level
OPP: Add dev_pm_opp_add_dynamic() to allow more flexibility
PM: domains: Implement the ->set_performance_state() callback for genpd
PM: domains: Introduce dev_pm_domain_set_performance_state()
firmware: arm_scmi: Rename scmi_{msg_,}clock_config_{get,set}_{2,21}
firmware: arm_scmi: Do not use !! on boolean when setting msg->flags
firmware: arm_scmi: Move power-domain driver to the pmdomain dir
pmdomain: arm: Add the SCMI performance domain
...
Link: https://lore.kernel.org/r/20231010124347.1620040-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
We are using a wrong mcbsp functional clock. The interconnect target module
driver provided clock for mcbsp is not same as the mcbsp functional clock
known as the gfclk main_clk. The mcbsp functional clocks for mcbsp should
have been added before we dropped the legacy platform data.
Additionally we are also missing the clock aliases for the clocks used by
the audio driver if reparenting is needed. This causes audio driver errors
like "CLKS: could not clk_get() prcm_fck" for mcbsp as reported by Andreas.
The mcbsp clock aliases too should have been added before we dropped the
legacy platform data.
Let's add the clocks and aliases with a single patch to fix the issue
similar to omap4. On omap5, there is no mcbsp4 instance on the l4_per
interconnect.
Fixes: b1da0fa21b ("ARM: OMAP2+: Drop legacy platform data for omap5 mcbsp")
Cc: H. Nikolaus Schaller <hns@goldelico.com>
Reported-by: Andreas Kemnade <andreas@kemnade.info>
Reported-by: Péter Ujfalusi <peter.ujfalusi@gmail.com>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
We are using a wrong mcbsp functional clock. The interconnect target module
driver provided clock for mcbsp is not same as the mcbsp functional clock
known as the gfclk main_clk. The mcbsp functional clocks for mcbsp should
have been added before we dropped the legacy platform data.
Additionally we are also missing the clock aliases for the clocks used by
the audio driver if reparenting is needed. This causes audio driver errors
like "CLKS: could not clk_get() prcm_fck" for mcbsp as reported by Andreas.
The mcbsp clock aliases too should have been added before we dropped the
legacy platform data.
Let's add the clocks and aliases with a single patch to fix the issue.
Fixes: 349355ce3a ("ARM: OMAP2+: Drop legacy platform data for omap4 mcbsp")
Reported-by: Andreas Kemnade <andreas@kemnade.info>
Reported-by: Péter Ujfalusi <peter.ujfalusi@gmail.com>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The divider_ro_round_rate() function could potentially return -EINVAL on
error but the error handling doesn't work because "rate" is unsigned.
It should be a type long.
Fixes: 06ed0fc0fb ("clk: stm32: composite: Switch to determine_rate")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/d9a78453-9b40-48c1-830e-00751ba3ecb8@kili.mountain
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
In the possible_parent_show function, ensure proper handling of the return
value from of_clk_get_parent_name to prevent potential issues arising from
a NULL return.
The current implementation invokes seq_puts directly on the result of
of_clk_get_parent_name without verifying the return value, which can lead
to kernel panic if the function returns NULL.
This patch addresses the concern by introducing a check on the return
value of of_clk_get_parent_name. If the return value is not NULL, the
function proceeds to call seq_puts, providing the returned value as
argument.
However, if of_clk_get_parent_name returns NULL, the function provides a
static string as argument, avoiding the panic.
Fixes: 1ccc0ddf04 ("clk: Use seq_puts() in possible_parent_show()")
Reported-by: Philip Daly <pdaly@redhat.com>
Signed-off-by: Alessandro Carminati (Red Hat) <alessandro.carminati@gmail.com>
Link: https://lore.kernel.org/r/20230921073217.572151-1-alessandro.carminati@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Commit 9607beb917 ("clk: socfpga: gate: Add a determine_rate hook")
added a determine_rate implementation set to the
clk_hw_determine_rate_no_reparent, but failed to account for the
internal divider that wasn't used before anywhere but in recalc_rate.
This led to inconsistencies between the clock rate stored in
clk_core->rate and the one returned by clk_round_rate() that leverages
determine_rate().
Since that driver seems to be widely used (and thus regression-prone)
and not supporting rate changes (since it's missing a .set_rate
implementation), we can just report the current divider programmed in
the clock but not try to change it in any way.
This should be good enough to fix the issues reported, and if someone
ever wants to allow the divider to change then it should be easy enough
using the clk-divider helpers.
Link: https://lore.kernel.org/linux-clk/20231005095927.12398-2-b.spranger@linutronix.de/
Fixes: 9607beb917 ("clk: socfpga: gate: Add a determine_rate hook")
Reported-by: Benedikt Spranger <b.spranger@linutronix.de>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20231012083729.2148044-1-mripard@kernel.org
[sboyd@kernel.org: Fix hw -> hwclk]
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
In light of the recent discovery that the fractional divisor
approximation does not utilize the full available range for clocks that
are flagged CLK_FRAC_DIVIDER_ZERO_BASED [1], implement tests for the
edge cases of this clock type.
Signed-off-by: Frank Oltmanns <frank@oltmanns.dev>
Link: https://lore.kernel.org/lkml/20230529133433.56215-1-frank@oltmanns.dev [1]
Link: https://lore.kernel.org/r/20230617131041.18313-3-frank@oltmanns.dev
[sboyd@kernel.org: Rename suite and tests slightly, drop unused
includes, store parent rate to compare instead of repeating equation]
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Consider the CLK_FRAC_DIVIDER_ZERO_BASED flag when finding the best
approximation for m and n. By doing so, increase the range of valid
values for the numerator and denominator by 1.
Furthermore, export the approximation function so that users of this
function can be compiled as modules.
Cc: A.s. Dong <aisheng.dong@nxp.com>
Signed-off-by: Frank Oltmanns <frank@oltmanns.dev>
Link: https://lore.kernel.org/r/20230617131041.18313-2-frank@oltmanns.dev
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Add clock and reset support for the SDHI1 and SDHI2 blocks on the
RZ/G3S (R9A08G045) SoC.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20231010132701.1658737-3-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Use the %x format specifier to print CLK_ON_R(). This makes debugging
easier as the value printed will be hexadecimal like in the hardware
manual. Along with it add "0x" in front of the printed value.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20231010132701.1658737-2-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Add minimal clock and reset support for the RZ/G3S SoC to be able to
boot Linux from SD Card/eMMC. This includes necessary core clocks for
booting and GIC, SCIF, GPIO, and SD0 module clocks and resets.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20231006103959.197485-5-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Add a divider clock driver for RZ/G3S. This will be used on RZ/G3S for
the SDHI, SPI, OCTA, I, I2, I3, P0, P1, P2, and P3 core clocks.
The divider has some limitation for SDHI, OCTA and SPI clocks:
- SDHI div cannot be 1 if parent rate is 800MHz,
- OCTA, SPI div cannot be 1 if parent rate is 400MHz.
To handle these limitations, a notifier is registered from platform
specific clock driver, which makes sure proper actions are taken before
the clock rate is changed, when needed.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20231006103959.197485-4-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Refactor SD MUX driver to be able to reuse the same code on RZ/G3S.
RZ/G2{L,UL} has a limitation with regards to switching the clock source
for SD MUX (MUX clock source has to be switched to 266MHz before
switching b/w 533MHz and 400MHz). Rework the handling of this limitation
to use a clock notifier that is registered according to platform based
initialization data, so the SD MUX code can be reused on RZ/G3S.
As RZ/G2{L,UL} and RZ/G3S use different bits in different registers to
check if the clock switching has been done, this configuration (register
offset, register bits and bitfield width) is now passed through struct
cpg_core_clk::sconf (status configuration) from platform specific
initialization code.
Along with struct cpg_core_clk::sconf the mux table indices are also
passed from platform specific initialization code.
Also, mux flags are now passed to DEF_SD_MUX() as they will be used
later by RZ/G3S.
CPG_WEN_BIT macro has been introduced to select properly the WEN bit
of various registers.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20231006103959.197485-3-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230929-clk-maple-versaclk-v1-4-24dd5b3d8689@kernel.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230929-clk-maple-versaclk-v1-3-24dd5b3d8689@kernel.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230929-clk-maple-versaclk-v1-2-24dd5b3d8689@kernel.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The versaclock3 driver provides an _is_writeable() function which returns
true for all registers. This is the default assumption for regmaps so we
can remove the function for a very minor improvement in performance and
code size.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230929-clk-maple-versaclk-v1-1-24dd5b3d8689@kernel.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230929-clk-maple-si-v1-5-e26cfcaf27bd@kernel.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230929-clk-maple-si-v1-4-e26cfcaf27bd@kernel.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230929-clk-maple-si-v1-3-e26cfcaf27bd@kernel.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230929-clk-maple-si-v1-2-e26cfcaf27bd@kernel.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230929-clk-maple-si-v1-1-e26cfcaf27bd@kernel.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230929-clk-rbtree-cdce925-v1-1-a36b459002f7@kernel.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Transform the existing clk_leaf_mux_set_rate_parent test into a
parameterized test that calls the various determine rate APIs that exist
for clk providers. This ensures that whatever determine rate API is used
by a clk provider will return the correct parent in the best_parent_hw
pointer of the clk_rate_request because clk_rate_requests are forwarded
properly.
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20230912175534.2427862-3-sboyd@kernel.org
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Running this kunit test with lockdep enabled leads to warning splats
about calling clk provider APIs without the clk_prepare lock held. I
proposed adding a wrapper around these APIs to grab the prepare lock so
we can call them from anywhere, and Maxime implemented that approach[1],
but it didn't look great. That's because we had to make more kunit
testing APIs just to call code from a place that isn't a clk provider
when the prepare lock isn't held.
Instead of doing that, let's implement a determine_rate clk_op for a new
leaf clk that is the child of the existing leaf clk. We can call
__clk_determine_rate() on the existing leaf clk from there, and stash
away the clk_rate_request struct to check once the clk_op returns. Drive
that clk_op by calling clk_round_rate() to keep things similar to how it
was before (i.e. nothing actually changes rate, just the new rate is
determined). This silences the warning by driving the test from a
clk_op where we know the prepare lock is held.
While looking at this in more detail, it was determined that the code we
intended to test in commit 262ca38f4b ("clk: Stop forwarding
clk_rate_requests to the parent") wasn't actually tested. The call to
__clk_determine_rate() wasn't actually getting to the newly introduced
code under the CLK_SET_RATE_PARENT if condition in
clk_core_round_rate_nolock() because the parent clk (the mux) could
round rates. We introduce a new leaf and make sure the parent of that
clk has no clk_ops so that we can be certain that the
CLK_SET_RATE_PARENT condition in clk_core_round_rate_nolock() is
evaluated.
Reported-by: Guenter Roeck <linux@roeck-us.net>
Closes: https://lore.kernel.org/linux-clk/2b594e50-2bbf-4a2d-88e6-49fc39f3957a@roeck-us.net/
Reported-by: kernel test robot <yujie.liu@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202301310919.b9d56ee3-yujie.liu@intel.com
Cc: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20230721-clk-fix-kunit-lockdep-v1-0-32cdba4c8fc1@kernel.org [1]
Fixes: 262ca38f4b ("clk: Stop forwarding clk_rate_requests to the parent")
Link: https://lore.kernel.org/r/20230912175534.2427862-2-sboyd@kernel.org
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Add the missing devm_kfree() when we skip the clocks with invalid or
missing information from the firmware.
Cc: Cristian Marussi <cristian.marussi@arm.com>
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: linux-clk@vger.kernel.org
Fixes: 6d6a1d82ea ("clk: add support for clocks provided by SCMI")
Link: https://lore.kernel.org/r/20231004193600.66232-1-sudeep.holla@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Remove CPG_SDHI_DSEL and its bits from the generic header as RZ/G3S has
different offset registers and bits for this, thus avoid mixing them.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230929053915.1530607-10-claudiu.beznea@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Add clk_hw_data struct that keeps the core part of the clock data.
sd_hw_data embeds a member of type struct clk_hw_data along with other
members (in the next commits). This commit prepares the field for
refactoring the SD MUX clock driver.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230929053915.1530607-9-claudiu.beznea@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Add support for reading the frequency of PLL1/4/6 as available on
RZ/G3S. The computation formula for the PLL frequency is as follows:
Fout = (nir + nfr / 4096) * Fin / (mr * pr)
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230929053915.1530607-8-claudiu.beznea@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
The spinlock in rzg2l_mod_clock_endisable() is intended to protect
RMW-accesses to the hardware register. There is no need to protect
instructions that set temporary variables which will be written
afterwards to a hardware register. With this only one write to one
clock register is executed thus locking/unlocking rmw_lock is removed.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230929053915.1530607-7-claudiu.beznea@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
According to the hardware manual for RZ/G2L
(r01uh0914ej0130-rzg2l-rzg2lc.pdf), the computation formula for PLL rate
is as follows:
Fout = ((m + k/65536) * Fin) / (p * 2^s)
and k has values in the range [-32768, 32767]. Dividing k by 65536 with
integer arithmetic gives zero all the time, causing slight differences
b/w what has been set vs. what is displayed. Thus, get rid of this and
decompose the formula before dividing k by 65536.
Fixes: ef3c613ccd ("clk: renesas: Add CPG core wrapper for RZ/G2L SoC")
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230929053915.1530607-6-claudiu.beznea@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
The onitial value of the CPG_PL2SDHI_DSEL bits 0..1 or 4..6 is 01b. The
hardware user's manual (r01uh0914ej0130-rzg2l-rzg2lc.pdf) specifies that
setting 0 is prohibited. Hence rzg2l_cpg_sd_clk_mux_get_parent() should
just read CPG_PL2SDHI_DSEL, trust the value, and return the proper clock
parent index based on the value read.
Fixes: eaff33646f ("clk: renesas: rzg2l: Add SDHI clk mux support")
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230929053915.1530607-5-claudiu.beznea@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
The SD MUX output (SD0) is further divided by 4 in G2{L,UL}. The
divided clock is SD0_DIV4. SD0_DIV4 is registered with
CLK_SET_RATE_PARENT which means a rate request for it is propagated to
the MUX and could reach rzg2l_cpg_sd_clk_mux_set_parent() concurrently
with the users of SD0.
Add proper locking to avoid concurrent accesses on SD MUX set rate
registers.
Fixes: eaff33646f ("clk: renesas: rzg2l: Add SDHI clk mux support")
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230929053915.1530607-4-claudiu.beznea@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
The hardware user manual for RZ/G2L (r01uh0914ej0130-rzg2l-rzg2lc.pdf,
chapter 7.4.7 Procedure for Switching Clocks by the Dynamic Switching
Frequency Selectors) specifies that we need to check CPG_PL2SDHI_DSEL
for SD clock switching status.
Fixes: eaff33646f ("clk: renesas: rzg2l: Add SDHI clk mux support")
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230929053915.1530607-3-claudiu.beznea@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
The clock dividers might be used with clock stop bit enabled or not.
Current tables only support recommended values from the datasheet. This
might result in warnings like below because no valid clock divider is
found. Resulting in a 0 divider.
There are Renesas ARM Trusted Firmware version out there which e.g.
configure 0x201 (shifted logical right by 2: 0x80) and with this match
the added { STPnHCK | 0, 1 }:
https://github.com/renesas-rcar/arm-trusted-firmware/blob/rcar_gen3_v2.3/drivers/renesas/rcar/emmc/emmc_init.c#L108
------------[ cut here ]------------
sd1h: Zero divisor and CLK_DIVIDER_ALLOW_ZERO not set
WARNING: CPU: 1 PID: 1 at drivers/clk/clk-divider.c:141 divider_recalc_rate+0x48/0x70
Modules linked in:
CPU: 1 PID: 1 Comm: swapper/0 Not tainted 6.1.52 #1
Hardware name: Custom board based on r8a7796 (DT)
pstate: 40000005 (nZcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : divider_recalc_rate+0x48/0x70
...
------------[ cut here ]------------
Fixes: bb6d3fa98a ("clk: renesas: rcar-gen3: Switch to new SD clock handling")
Signed-off-by: Dirk Behme <dirk.behme@de.bosch.com>
[wsa: extended the table to 5 entries, added comments, reword commit message a little]
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Tested-by: Dirk Behme <dirk.behme@de.bosch.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230928080317.28224-1-wsa+renesas@sang-engineering.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Add CAN_1/2 support for i.MX8QM
Add M4_0, PI_0_PWM_0 and PI_0_I2C_0 for i.MX8QXP
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20230912-imx8-clk-v1-v1-7-69a34bcfcae1@nxp.com
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Not register clks that not owned to current partition.
CPU resources are specical resources, it is assigned in ATF, not
non-secure OS, but we still need to allow cpu freq, so return
true for non-secure OS for cpu resources.
Otherwise there will be error log if the resources are owned by current
partition:
[ 19.387291] cm40_i2c_div: failed to attached the power domain -2
[ 19.389305] cm40_lpuart_div: failed to attached the power domain -2
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20230912-imx8-clk-v1-v1-6-69a34bcfcae1@nxp.com
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
IMX_SC_R_VPU_UART and IMX_SC_R_VPUCORE was used in i.MX8QM A0 which
not for mass production. i.MX8QM B0 not have the two resources, so drop
it.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20230912-imx8-clk-v1-v1-4-69a34bcfcae1@nxp.com
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
The SC_PM_CLK_MISC0 clock is not available for the resources of ENET0/1 on
i.MX8DXL. Using the clock device compatible string to identify the platform
and only initialize the enetX_rgmii_rx_clk clock for non i.MX8DXL platform.
Signed-off-by: Shenwei Wang <shenwei.wang@nxp.com>
Reviewed-by: Ranjani Vaidyanathan <ranjani.vaidyanathan@nxp.com>
Reviewed-by: Jacky Bai <ping.bai@nxp.com>
Acked-by: Jason Liu <jason.hui.liu@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20230912-imx8-clk-v1-v1-3-69a34bcfcae1@nxp.com
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Move the elcdif_pll clock initialization before the lcd_clk, since the
elcdif_clk needs to be initialized ahead of lcd_clk, being its parent.
This change fixes issues with the LCD clocks during suspend/resume.
Fixes: babfaa9556 ("clk: imx: scu: add more scu clocks")
Suggested-by: Ranjani Vaidyanathan <ranjani.vaidyanathan@nxp.com>
Acked-by: Laurentiu Palcu <laurentiu.palcu@nxp.com>
Signed-off-by: Robert Chiras <robert.chiras@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20230912-imx8-clk-v1-v1-2-69a34bcfcae1@nxp.com
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Entries in imx8dxl_clk_scu_rsrc_table must be kept in the ascending
order, and IMX_SC_R_M4_0_UART < IMX_SC_R_M4_0_I2C.
Fixes: 036a4b4b4d ("clk: imx: Add imx8dxl clk driver")
Signed-off-by: Viorel Suman <viorel.suman@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20230912-imx8-clk-v1-v1-1-69a34bcfcae1@nxp.com
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
It is not a good idea to hardcode the LCDIF1 parent inside the
clock driver because some users may want to use a different clock
parent for LCDIF1. One of the reasons could be related to EMI tests.
Remove the harcoded LCDIF1 parent when the LCDIF1 parent is described
via devicetree.
Old dtb's that do not describe the LCDIF1 parent via devicetree will
use the same PLL5 clock as parent to keep the original behavior.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20230815130923.775117-1-festevam@gmail.com
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
The return value of clk_imx_acm_detach_pm_domains() is never used.
Simplify the code and turn it into a void function.
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
If devm_clk_hw_register_mux_parent_data_table() fails, we branch to the
error handling path and imx_check_clk_hws() is never called.
Actually, imx_check_clk_hws() is a no-op because values in 'hws' are either
valid, either NULL.
Move the call to imx_check_clk_hws() in the error handling path, so that
an error is logged.
Fixes: d3a0946d7a ("clk: imx: imx8: add audio clock mux driver")
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
If an error occurs after a successful clk_imx_acm_attach_pm_domains() call,
it must be undone.
Add an explicit error handling path, re-order the code and add the missing
clk_imx_acm_detach_pm_domains() call.
Fixes: d3a0946d7a ("clk: imx: imx8: add audio clock mux driver")
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
If a devm_clk_hw_register_mux_parent_data_table() call fails, it is likely
that the probe should fail with an error code.
Set 'ret' before leaving the function.
Fixes: d3a0946d7a ("clk: imx: imx8: add audio clock mux driver")
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
If a dev_pm_domain_attach_by_id() call fails, previously allocated
resources need to be released.
Fixes: d3a0946d7a ("clk: imx: imx8: add audio clock mux driver")
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
If the i.MX8QXP clock provider is built-in but the MXC_CLK is
built as module, build fails:
aarch64-linux-ld: drivers/clk/imx/clk-imx8-acm.o: in function `imx8_acm_clk_probe':
clk-imx8-acm.c:(.text+0x3d0): undefined reference to `imx_check_clk_hws'
Fix that by selecting MXC_CLK in case of CLK_IMX8QXP.
Fixes: c2cccb6d0b ("clk: imx: add imx8qxp clk driver")
Closes: https://lore.kernel.org/all/8b77219e-b59e-40f1-96f1-980a0b2debcf@infradead.org/
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Add the peripherals clock controller driver in the S4 SoC family.
[jbrunet: remove extra new line at end of s4-peripherals.h]
Signed-off-by: Yu Tu <yu.tu@amlogic.com>
Link: https://lore.kernel.org/r/20230904075504.23263-5-yu.tu@amlogic.com
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Make r8a7795_core_clks and r8a7795_mod_clks arrays const and align them
with the other clock tables in other *cpg-mssr.c . No functional change.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230917095832.39007-1-marek.vasut+renesas@mailbox.org
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
According to a commit in the 3.4 vendor kernel sources[0] the
ocmemcx_ahb_clk clock "is controlled by RPM and should not be touched by
APPS.".
[0] 37df5f2d91
And indeed, when using MDSS+GPU+OCMEM on MSM8226 and not using
clk_ignore_unused, when Linux tries to disable the clock the device
crashes and reboots.
And since there's also no evidence of this clock in msm8974 vendor
kernel sources, remove the clock for msm8226 and msm8974.
Fixes: d8b212014e ("clk: qcom: Add support for MSM8974's multimedia clock controller (MMCC)")
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230902-msm8226-ocmemcx_ahb_clk-remove-v1-1-8124dbde83b9@z3ntu.xyz
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add support for .is_enabled atomic clk_ops using the related SCMI clock
operation in atomic mode, if available.
Note that the .is_enabled callback will be supported by this SCMI clock
driver only if the configured underlying SCMI transport does support atomic
operations.
CC: Michael Turquette <mturquette@baylibre.com>
CC: Stephen Boyd <sboyd@kernel.org>
CC: linux-clk@vger.kernel.org
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20230826125308.462328-6-cristian.marussi@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
SCMI clock enable/disable operations come in 2 different flavours which
simply just differ in how the underlying SCMI transactions is carried on:
atomic or not.
Currently we expose such SCMI operations through 2 distinctly named
wrappers, that, in turn, are wrapped into another couple of similarly and
distinctly named callbacks inside SCMI clock driver user.
Reduce the churn of duplicated wrappers by adding a param to SCMI clock
enable/disable operations to ask for atomic operation while removing the
_atomic version of such operations.
No functional change.
CC: Michael Turquette <mturquette@baylibre.com>
CC: Stephen Boyd <sboyd@kernel.org>
CC: linux-clk@vger.kernel.org
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20230826125308.462328-2-cristian.marussi@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
The SMMU GDSC doesn't have to be ALWAYS-ON and shouldn't feature the
HW_CTRL flag (it's separate from hw_ctrl_addr). In addition to that,
it should feature a cxc entry for bimc_smmu_axi_clk and be marked as
votable.
Fix all of these issues.
Fixes: d14b15b593 ("clk: qcom: Add MSM8998 Multimedia Clock Controller (MMCC) driver")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://lore.kernel.org/r/20230531-topic-8998_mmssclk-v3-5-ba1b1fd9ee75@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Some branch clocks are governed externally and we're only supposed to
send a request concerning their shutdown, not actually ensure it happens.
Use the BRANCH_HALT_SKIP define to skip checking the halt bit.
Fixes: d14b15b593 ("clk: qcom: Add MSM8998 Multimedia Clock Controller (MMCC) driver")
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230531-topic-8998_mmssclk-v3-4-ba1b1fd9ee75@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
If the parent clock rate is greater than unsigned long max/2 then
integer overflow happens when calculating the clock rate on 32-bit systems.
As RCG2 uses half integer dividers, the clock rate is first being
multiplied by 2 which will overflow the unsigned long max value.
Hence, replace the common pattern of doing 64-bit multiplication
and then a do_div() call with simpler mult_frac call.
Fixes: bcd61c0f53 ("clk: qcom: Add support for root clock generators (RCGs)")
Signed-off-by: Devi Priya <quic_devipriy@quicinc.com>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Link: https://lore.kernel.org/r/20230901073640.4973-1-quic_devipriy@quicinc.com
[bjorn: Also drop unnecessary {} around single statements]
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The GCC driver contains clocks that are owned (meaning configured and
scaled) by the RPM core.
Remove them from Linux to stop interjecting the RPM's logic.
Fixes: b1e010c073 ("clk: qcom: Add MSM8996 Global Clock Control (GCC) driver")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230830-topic-rpmbusclocks8996gcc-v1-1-9e99bedcdc3b@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
IPQ5332's GPLL0's nominal/turbo frequency is 800MHz.
This must not be scaled based on the requirement of
dependent clocks. Hence remove the CLK_SET_RATE_PARENT
flag.
Fixes: 3d89d52970 ("clk: qcom: add Global Clock controller (GCC) driver for IPQ5332 SoC")
Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
Reviewed-by: Kathiravan T <quic_kathirav@quicinc.com>
Link: https://lore.kernel.org/r/1693474133-10467-1-git-send-email-quic_varada@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add support for camera qdss, sleep and xo clocks.
Co-developed-by: Taniya Das <quic_tdas@quicinc.com>
Signed-off-by: Taniya Das <quic_tdas@quicinc.com>
Signed-off-by: Jagadeesh Kona <quic_jkona@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230707035744.22245-5-quic_jkona@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add support for the camera clock controller for camera clients to be
able to request for camcc clocks on SM8550 platform.
Co-developed-by: Taniya Das <quic_tdas@quicinc.com>
Signed-off-by: Taniya Das <quic_tdas@quicinc.com>
Signed-off-by: Jagadeesh Kona <quic_jkona@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230707035744.22245-4-quic_jkona@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Lucid ole pll has as extra RINGOSC_CAL_L field in L register in
addition to the fields that are part of lucid evo pll, hence add
support for lucid ole pll configure function to configure the ole plls.
Signed-off-by: Jagadeesh Kona <quic_jkona@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230707035744.22245-3-quic_jkona@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Clarify the content of the r9a06g032_clkdesc structure by naming the
remaining anonymous structures defined inside. Renaming each field and
updating the doc then becomes necessary in order to avoid name
duplications and kdoc warnings.
Signed-off-by: Ralph Siemsen <ralph.siemsen@linaro.org>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230913203805.465780-2-ralph.siemsen@linaro.org
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Mention the 'dual' structure in the kdoc. This fixes the following
W=1 warning during build:
> drivers/clk/renesas/r9a06g032-clocks.c:119: warning: Function parameter or member 'dual' not described in 'r9a06g032_clkdesc'
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202309101314.kTRoxND5-lkp@intel.com/
Signed-off-by: Ralph Siemsen <ralph.siemsen@linaro.org>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230913203805.465780-1-ralph.siemsen@linaro.org
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
flag and mux_flags are intended to keep bit masks. Use u32 type for it.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230912045157.177966-15-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Use FIELD_GET() for PLL register fields. This is its purpose.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230912045157.177966-14-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
The bitmask << 16 is anyway set on both branches of if thus move it
before the if and set the lower bits of registers only in case clock is
enabled.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230912045157.177966-12-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
core->name already contains the clock name thus, there is no
need to check the GET_SHIFT(core->conf) to decide on it.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230912045157.177966-11-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Add PLL configuration for MSM8976 SoC, this SoC offers 3 HFPLL.
Small cluster offers two presets for 652-902Mhz range and 902Mhz-1.47Ghz.
For simplicity only add second range as smaller frequencies can be obtained
via apcs divider or safe parent this also saves us
a hassle of reconfiguring VCO bit and config_val.
A72 and CCI cluster only use single frequency range with their
outputs/post_dividers/vco_bits being static.
Signed-off-by: Adam Skladowski <a39.skl@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230812112534.8610-6-a39.skl@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
HFPLL driver can be used to drive PLLs also on different SoCs like MSM8976
On MSM8976 each PLL gets it own different configuration,
add matching pdata to driver to support multiple configurations.
Signed-off-by: Adam Skladowski <a39.skl@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230812112534.8610-4-a39.skl@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add support for pre-configuring default frequency multiplier,
this appears to be required on some platforms like MSM8976.
Without configuring L_VAL device reboots when trying to bring PLL up.
Signed-off-by: Adam Skladowski <a39.skl@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230812112534.8610-3-a39.skl@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
tegra-bpmp clocks driver makes implicit conversion of signed error
code to unsigned value in recalc_rate operation. The behavior for
recalc_rate, according to it's specification, should be that "If the
driver cannot figure out a rate for this clock, it must return 0."
Fixes: ca6f2796ee ("clk: tegra: Add BPMP clock driver")
Signed-off-by: Timo Alho <talho@nvidia.com>
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Link: https://lore.kernel.org/r/20230912112951.2330497-1-cyndis@kapsi.fi
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Rework the write operation such that the Byte Count register is written with
a single raw i2c write outside of regmap using transfer which does specify
the number of bytes to be transfered, one in this case, and which makes the
expected subsequent write transfer look like address+register+data, and then
make use of this method. Without this change, the Byte Count register write
in probe() would succeed as it would provide the byte count as part of its
write payload, but any subsequent writes would fail due to this Byte Count
register programming. Such failing writes happens e.g. during resume, when
restoring the regmap content.
Fixes: edc12763a3 ("clk: si521xx: Clock driver for Skyworks Si521xx I2C PCIe clock generators")
Signed-off-by: Marek Vasut <marex@denx.de>
Link: https://lore.kernel.org/r/20230831181656.154750-2-marex@denx.de
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
In order to reload registers into the clock generator on resume using
regcache_sync(), it is necessary to select one of the regcache types
which are not NONE. Since this device has some 7 registers, use the
simplest one, FLAT. The regcache code complains about REGCACHE_NONE
being selected and generates a WARNING, this fixes that warning.
Fixes: edc12763a3 ("clk: si521xx: Clock driver for Skyworks Si521xx I2C PCIe clock generators")
Signed-off-by: Marek Vasut <marex@denx.de>
Link: https://lore.kernel.org/r/20230831181656.154750-1-marex@denx.de
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The thm*_clk have two clock sources 32k and 250k,excluding 32m.
Fixes: af3bd36573 ("clk: sprd: Add clocks support for UMS512")
Signed-off-by: Zhifeng Tang <zhifeng.tang@unisoc.com>
Acked-by: Chunyan Zhang <zhang.lyra@gmail.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Link: https://lore.kernel.org/r/20230824092624.20020-1-zhifeng.tang@unisoc.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Make vc3_clk_mux enum values depend upon vc3_clk enum values to avoid
any accidental breakage in the future.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20230824104812.147775-5-biju.das.jz@bp.renesas.com
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Fix the below cocci warnings by replacing do_div()->div64_ul() and
bound the result with a max value of U16_MAX.
cocci warnings:
drivers/clk/clk-versaclock3.c:404:2-8: WARNING: do_div() does a
64-by-32 division, please consider using div64_ul instead.
Reported-by: Julia Lawall <julia.lawall@inria.fr>
Closes: https://lore.kernel.org/r/202307270841.yr5HxYIl-lkp@intel.com/
Fixes: 6e9aff555d ("clk: Add support for versa3 clock driver")
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20230824104812.147775-3-biju.das.jz@bp.renesas.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The 'hw' pointer local variable in this function became unused after
commit f5290d8e4f ("clk: asm9260: use parent index to link the
reference clock"). Remove it to silence an unused but set variable
warning.
drivers/clk/clk-asm9260.c:258:17: warning: variable 'hw' set but not used [-Wunused-but-set-variable]
struct clk_hw *hw, *pll_hw;
^
1 warning generated.
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Fixes: f5290d8e4f ("clk: asm9260: use parent index to link the reference clock")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202309042014.IWERPl09-lkp@intel.com/
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20230909000703.3478902-1-sboyd@kernel.org
Use for_each_compatible_node() instead of open-coding it.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230802091920.3270703-1-yangyingliang@huawei.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
changes to the clk framework this time around. That's probably because everyone
was on vacation (yours truly included). We did lose a couple clk drivers this
time around because nobody was using those devices. That skews the diffstat a
bit, but either way, nothing looks out of the ordinary here. The usual suspects
are chugging along adding support for more SoCs and fixing bugs.
If I had to choose, I'd say the theme for the past few months has been
"polish". There's quite a few patches that migrate to
devm_platform_ioremap_resource() in here. And there's more than a handful of
patches that move the NR_CLKS define from the DT binding header to the driver.
There's even patches that migrate drivers to use clk_parent_data and clk_hw to
describe clk tree topology. It seems that the spring (summer?) cleaning bug got
some folks, or the semiconductor shortage finally hit the software side.
New Drivers:
- StarFive JH7110 SoC clock drivers
- Qualcomm IPQ5018 Global Clock Controller driver
- Versa3 clk generator to support 48KHz playback/record with audio codec on
RZ/G2L SMARC EVK
Removed Drivers:
- Remove non-OF mmp clk drivers
- Remove OXNAS clk driver
Updates:
- Add __counted_by to struct clk_hw_onecell_data and struct spmi_pmic_div_clk_cc
- Move defines for numbers of clks (NR_CLKS) from DT headers to drivers
- Introduce kstrdup_and_replace() and use it
- Add PLL rates for Rockchip rk3568
- Add the display clock tree for Rockchip rv1126
- Add Audio Clock Generator (ADG) clocks on Renesas R-Car Gen3 and RZ/G2 SoCs
- Convert sun9i-mmc clock to use devm_platform_get_and_ioremap_resource()
- Fix function name in a comment in ccu_mmc_timing.c
- Parameter name correction for ccu_nkm_round_rate()
- Implement CLK_SET_RATE_PARENT for Allwinner NKM clocks, i.e. consider alternative
parent rates when determining clock rates
- Set CLK_SET_RATE_PARENT for Allwinner A64 pll-mipi
- Support finding closest (as opposed to closest but not higher) clock rate
for NM, NKM, mux and div type clocks, as use it for Allwinner A64 pll-video0
- Prefer current parent rate if able to generate ideal clock rate for Allwinner NKM clocks
- Clean up Qualcomm SMD RPM driver, with interconnect bus clocks moved out to
the interconnect drivers
- Fix various PM runtime bugs across many Qualcomm clk drivers
- Migrate Qualcomm MDM9615 is to parent_hw and parent_data
- Add network related resets on Qualcomm IPQ4019
- Add a couple missing USB related clocks to Qualcomm IPQ9574
- Add missing gpll0_sleep_clk_src to Qualcomm MSM8917 global clock controller
- In the Qualcomm QDU1000 global clock controller, GDSCs, clkrefs, and GPLL1 are
added, while PCIe pipe clock, SDCC rcg ops are corrected
- Add missing GDSCs to and correct GDSCs for the SC8280XP global clock controller driver
- Support retention for the Qualcomm SC8280XP display clock controller GDSCs.
- Qualcommm's SDCC apps_clk_src is marked with CLK_OPS_PARENT_ENABLE to fix
issues with missing parent clocks across sc7180, sm7150, sm6350 and sm8250,
while sm8450 is corrected to use floor ops
- Correct Qualcomm SM6350 GPU clock controller's clock supplies
- Drop unwanted clocks from the Qualcomm IPQ5332 GCC driver
- Add missing OXILICX GDSC to Qualcomm MSM8226 GCC
- Change the delay in the Qualcomm reset controller to fsleep() for correctness
- Extend the Qualcomm SM83550 Video clock controller to support SC8280XP
- Add graphics clock support on Renesas RZ/G2M, RZ/G2N, RZ/G2E, and R-Car H3,
M3-W, and M3-N SoCs
- Add Clocked Serial Interface (CSI) clocks on Renesas RZ/V2M
- Add PWM (MTU3) clock and reset on Renesas RZ/G2UL and RZ/Five
- Add the PDM IPC clock for i.MX93
- Add 519.75MHz frequency support for i.MX9 PLL
- Simplify the .determine_rate() implementation for i.MX GPR mux
- Make the i.MX8QXP LPCG clock use devm_platform_ioremap_resource()
- Add the audio mux clock to i.MX8
- Fix the SPLL2 MULT range for PLLv4
- Update the SPLL2 type in i.MX8ULP
- Fix the SAI4 clock on i.MX8MP
- Add silicon revision print for i.MX25 on clocks init
- Drop the return value from __mx25_clocks_init()
- Fix the clock pauses on no-op set_rate for i.MX8M composite clock
- Drop restrictions for i.MX PLL14xx and fix its max prediv value
- Drop the 393216000 and 361267200 from i.MX PLL14xx rate table to allow
glitch free switching
-----BEGIN PGP SIGNATURE-----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=h2Jz
-----END PGP SIGNATURE-----
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk subsystem updates from Stephen Boyd:
"This pull request is full of clk driver changes. In fact, there aren't
any changes to the clk framework this time around. That's probably
because everyone was on vacation (yours truly included). We did lose a
couple clk drivers this time around because nobody was using those
devices. That skews the diffstat a bit, but either way, nothing looks
out of the ordinary here. The usual suspects are chugging along adding
support for more SoCs and fixing bugs.
If I had to choose, I'd say the theme for the past few months has been
"polish". There's quite a few patches that migrate to
devm_platform_ioremap_resource() in here. And there's more than a
handful of patches that move the NR_CLKS define from the DT binding
header to the driver. There's even patches that migrate drivers to use
clk_parent_data and clk_hw to describe clk tree topology. It seems
that the spring (summer?) cleaning bug got some folks, or the
semiconductor shortage finally hit the software side.
New Drivers:
- StarFive JH7110 SoC clock drivers
- Qualcomm IPQ5018 Global Clock Controller driver
- Versa3 clk generator to support 48KHz playback/record with audio
codec on RZ/G2L SMARC EVK
Removed Drivers:
- Remove non-OF mmp clk drivers
- Remove OXNAS clk driver
Updates:
- Add __counted_by to struct clk_hw_onecell_data and struct
spmi_pmic_div_clk_cc
- Move defines for numbers of clks (NR_CLKS) from DT headers to
drivers
- Introduce kstrdup_and_replace() and use it
- Add PLL rates for Rockchip rk3568
- Add the display clock tree for Rockchip rv1126
- Add Audio Clock Generator (ADG) clocks on Renesas R-Car Gen3 and
RZ/G2 SoCs
- Convert sun9i-mmc clock to use
devm_platform_get_and_ioremap_resource()
- Fix function name in a comment in ccu_mmc_timing.c
- Parameter name correction for ccu_nkm_round_rate()
- Implement CLK_SET_RATE_PARENT for Allwinner NKM clocks, i.e.
consider alternative parent rates when determining clock rates
- Set CLK_SET_RATE_PARENT for Allwinner A64 pll-mipi
- Support finding closest (as opposed to closest but not higher)
clock rate for NM, NKM, mux and div type clocks, as use it for
Allwinner A64 pll-video0
- Prefer current parent rate if able to generate ideal clock rate for
Allwinner NKM clocks
- Clean up Qualcomm SMD RPM driver, with interconnect bus clocks
moved out to the interconnect drivers
- Fix various PM runtime bugs across many Qualcomm clk drivers
- Migrate Qualcomm MDM9615 is to parent_hw and parent_data
- Add network related resets on Qualcomm IPQ4019
- Add a couple missing USB related clocks to Qualcomm IPQ9574
- Add missing gpll0_sleep_clk_src to Qualcomm MSM8917 global clock
controller
- In the Qualcomm QDU1000 global clock controller, GDSCs, clkrefs,
and GPLL1 are added, while PCIe pipe clock, SDCC rcg ops are
corrected
- Add missing GDSCs to and correct GDSCs for the SC8280XP global
clock controller driver
- Support retention for the Qualcomm SC8280XP display clock
controller GDSCs.
- Qualcommm's SDCC apps_clk_src is marked with CLK_OPS_PARENT_ENABLE
to fix issues with missing parent clocks across sc7180, sm7150,
sm6350 and sm8250, while sm8450 is corrected to use floor ops
- Correct Qualcomm SM6350 GPU clock controller's clock supplies
- Drop unwanted clocks from the Qualcomm IPQ5332 GCC driver
- Add missing OXILICX GDSC to Qualcomm MSM8226 GCC
- Change the delay in the Qualcomm reset controller to fsleep() for
correctness
- Extend the Qualcomm SM83550 Video clock controller to support
SC8280XP
- Add graphics clock support on Renesas RZ/G2M, RZ/G2N, RZ/G2E, and
R-Car H3, M3-W, and M3-N SoCs
- Add Clocked Serial Interface (CSI) clocks on Renesas RZ/V2M
- Add PWM (MTU3) clock and reset on Renesas RZ/G2UL and RZ/Five
- Add the PDM IPC clock for i.MX93
- Add 519.75MHz frequency support for i.MX9 PLL
- Simplify the .determine_rate() implementation for i.MX GPR mux
- Make the i.MX8QXP LPCG clock use devm_platform_ioremap_resource()
- Add the audio mux clock to i.MX8
- Fix the SPLL2 MULT range for PLLv4
- Update the SPLL2 type in i.MX8ULP
- Fix the SAI4 clock on i.MX8MP
- Add silicon revision print for i.MX25 on clocks init
- Drop the return value from __mx25_clocks_init()
- Fix the clock pauses on no-op set_rate for i.MX8M composite clock
- Drop restrictions for i.MX PLL14xx and fix its max prediv value
- Drop the 393216000 and 361267200 from i.MX PLL14xx rate table to
allow glitch free switching"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (207 commits)
clk: qcom: Fix SM_GPUCC_8450 dependencies
clk: lmk04832: Support using PLL1_LD as SPI readback pin
clk: lmk04832: Don't disable vco clock on probe fail
clk: lmk04832: Set missing parent_names for output clocks
clk: mvebu: Convert to devm_platform_ioremap_resource()
clk: nuvoton: Convert to devm_platform_ioremap_resource()
clk: socfpga: agilex: Convert to devm_platform_ioremap_resource()
clk: ti: Use devm_platform_get_and_ioremap_resource()
clk: mediatek: Convert to devm_platform_ioremap_resource()
clk: hsdk-pll: Convert to devm_platform_ioremap_resource()
clk: gemini: Convert to devm_platform_ioremap_resource()
clk: fsl-sai: Convert to devm_platform_ioremap_resource()
clk: bm1880: Convert to devm_platform_ioremap_resource()
clk: axm5516: Convert to devm_platform_ioremap_resource()
clk: actions: Convert to devm_platform_ioremap_resource()
clk: cdce925: Remove redundant of_match_ptr()
clk: pxa910: Move number of clocks to driver source
clk: pxa1928: Move number of clocks to driver source
clk: pxa168: Move number of clocks to driver source
clk: mmp2: Move number of clocks to driver source
...
- Add __counted_by to struct clk_hw_onecell_data and struct spmi_pmic_div_clk_cc
- Remove non-OF mmp clk drivers
- Move number of clks from DT headers to drivers
* clk-imx:
clk: imx: pll14xx: dynamically configure PLL for 393216000/361267200Hz
clk: imx: pll14xx: align pdiv with reference manual
clk: imx: composite-8m: fix clock pauses when set_rate would be a no-op
clk: imx25: make __mx25_clocks_init return void
clk: imx25: print silicon revision during init
dt-bindings: clocks: imx8mp: make sai4 a dummy clock
clk: imx8mp: fix sai4 clock
clk: imx: imx8ulp: update SPLL2 type
clk: imx: pllv4: Fix SPLL2 MULT range
clk: imx: imx8: add audio clock mux driver
dt-bindings: clock: fsl,imx8-acm: Add audio clock mux support
clk: imx: clk-imx8qxp-lpcg: Convert to devm_platform_ioremap_resource()
clk: imx: clk-gpr-mux: Simplify .determine_rate()
clk: imx: Add 519.75MHz frequency support for imx9 pll
clk: imx93: Add PDM IPG clk
dt-bindings: clock: imx93: Add PDM IPG clk
* clk-samsung:
dt-bindings: clock: samsung: remove define with number of clocks
clk: samsung: exynoautov9: do not define number of clocks in bindings
clk: samsung: exynos850: do not define number of clocks in bindings
clk: samsung: exynos7885: do not define number of clocks in bindings
clk: samsung: exynos5433: do not define number of clocks in bindings
clk: samsung: exynos5420: do not define number of clocks in bindings
clk: samsung: exynos5410: do not define number of clocks in bindings
clk: samsung: exynos5260: do not define number of clocks in bindings
clk: samsung: exynos5250: do not define number of clocks in bindings
clk: samsung: exynos4: do not define number of clocks in bindings
clk: samsung: exynos3250: do not define number of clocks in bindings
* clk-annotate:
clk: qcom: clk-spmi-pmic-div: Annotate struct spmi_pmic_div_clk_cc with __counted_by
clk: Annotate struct clk_hw_onecell_data with __counted_by
* clk-marvell:
clk: pxa910: Move number of clocks to driver source
clk: pxa1928: Move number of clocks to driver source
clk: pxa168: Move number of clocks to driver source
clk: mmp2: Move number of clocks to driver source
clk: mmp: Remove old non-OF clock drivers
* clk-lmk:
clk: lmk04832: Support using PLL1_LD as SPI readback pin
clk: lmk04832: Don't disable vco clock on probe fail
clk: lmk04832: Set missing parent_names for output clocks
- Add Versa3 clk generator to support 48KHz playback/record with audio
codec on RZ/G2L SMARC EVK
- Introduce kstrdup_and_replace() and use it
* clk-versa:
clk: vc7: Use i2c_get_match_data() instead of device_get_match_data()
clk: vc5: Use i2c_get_match_data() instead of device_get_match_data()
clk: versaclock3: Switch to use i2c_driver's probe callback
clk: Add support for versa3 clock driver
dt-bindings: clock: Add Renesas versa3 clock generator bindings
* clk-strdup:
clk: ti: Replace kstrdup() + strreplace() with kstrdup_and_replace()
clk: tegra: Replace kstrdup() + strreplace() with kstrdup_and_replace()
driver core: Replace kstrdup() + strreplace() with kstrdup_and_replace()
lib/string_helpers: Add kstrdup_and_replace() helper
* clk-amlogic: (22 commits)
dt-bindings: soc: amlogic: document System Control registers
dt-bindings: clock: amlogic: convert amlogic,gxbb-aoclkc.txt to dt-schema
dt-bindings: clock: amlogic: convert amlogic,gxbb-clkc.txt to dt-schema
clk: meson: axg-audio: move bindings include to main driver
clk: meson: meson8b: move bindings include to main driver
clk: meson: a1: move bindings include to main driver
clk: meson: eeclk: move bindings include to main driver
clk: meson: aoclk: move bindings include to main driver
dt-bindings: clk: axg-audio-clkc: expose all clock ids
dt-bindings: clk: amlogic,a1-pll-clkc: expose all clock ids
dt-bindings: clk: amlogic,a1-peripherals-clkc: expose all clock ids
dt-bindings: clk: meson8b-clkc: expose all clock ids
dt-bindings: clk: g12a-aoclkc: expose all clock ids
dt-bindings: clk: g12a-clks: expose all clock ids
dt-bindings: clk: axg-clkc: expose all clock ids
dt-bindings: clk: gxbb-clkc: expose all clock ids
clk: meson: migrate axg-audio out of hw_onecell_data to drop NR_CLKS
clk: meson: migrate meson8b out of hw_onecell_data to drop NR_CLKS
clk: meson: migrate a1 clock drivers out of hw_onecell_data to drop NR_CLKS
clk: meson: migrate meson-aoclk out of hw_onecell_data to drop NR_CLKS
...
* clk-allwinner:
clk: sunxi-ng: nkm: Prefer current parent rate
clk: sunxi-ng: a64: select closest rate for pll-video0
clk: sunxi-ng: div: Support finding closest rate
clk: sunxi-ng: mux: Support finding closest rate
clk: sunxi-ng: nkm: Support finding closest rate
clk: sunxi-ng: nm: Support finding closest rate
clk: sunxi-ng: Add helper function to find closest rate
clk: sunxi-ng: Add feature to find closest rate
clk: sunxi-ng: a64: allow pll-mipi to set parent's rate
clk: sunxi-ng: nkm: consider alternative parent rates when determining rate
clk: sunxi-ng: nkm: Use correct parameter name for parent HW
clk: sunxi-ng: Modify mismatched function name
clk: sunxi: sun9i-mmc: Use devm_platform_get_and_ioremap_resource()
* clk-rockchip:
clk: rockchip: rv1126: Add PD_VO clock tree
clk: rockchip: rk3568: Fix PLL rate setting for 78.75MHz
clk: rockchip: rk3568: Add PLL rate for 101MHz
CONFIG_SM_GCC_8450 depends on ARM64 but it is selected by
CONFIG_SM_GPUCC_8450, which can be selected on ARM, resulting in a
Kconfig warning.
WARNING: unmet direct dependencies detected for SM_GCC_8450
Depends on [n]: COMMON_CLK [=y] && COMMON_CLK_QCOM [=y] && (ARM64 || COMPILE_TEST [=n])
Selected by [y]:
- SM_GPUCC_8450 [=y] && COMMON_CLK [=y] && COMMON_CLK_QCOM [=y]
Add the same dependencies to CONFIG_SM_GPUCC_8450 to resolve the
warning.
Fixes: 728692d49e ("clk: qcom: Add support for SM8450 GPUCC")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20230829-fix-sm_gpucc_8550-deps-v1-1-d751f6cd35b2@kernel.org
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The PLL1_PD pin (a.k.a. STATUS_LD1) can be used as SPI readback pin. Make
this possible.
Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl>
Link: https://lore.kernel.org/r/20230802064100.15793-3-mike.looijmans@topic.nl
Reviewed-by: Liam Beguin <liambeguin@gmail.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The probe() method never calls clk_prepare_enable(), so it should not
call clk_disable_unprepare() for the vco.clk in the error path. Fixes
a "lmk-vco already disabled" BUG when probe fails.
Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl>
Link: https://lore.kernel.org/r/20230802064100.15793-2-mike.looijmans@topic.nl
Reviewed-by: Liam Beguin <liambeguin@gmail.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
lmk04832_register_clkout forgot to fill in the parent_names, resulting
in the error message "Must specify parents if num_parents > 0".
Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl>
Link: https://lore.kernel.org/r/20230802064100.15793-1-mike.looijmans@topic.nl
Reviewed-by: Liam Beguin <liambeguin@gmail.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Problem can be reproduced by unloading snd_soc_simple_card, because in
devm_get_clk_from_child() devres data is allocated as `struct clk`, but
devm_clk_release() expects devres data to be `struct devm_clk_state`.
KASAN report:
==================================================================
BUG: KASAN: slab-out-of-bounds in devm_clk_release+0x20/0x54
Read of size 8 at addr ffffff800ee09688 by task (udev-worker)/287
Call trace:
dump_backtrace+0xe8/0x11c
show_stack+0x1c/0x30
dump_stack_lvl+0x60/0x78
print_report+0x150/0x450
kasan_report+0xa8/0xf0
__asan_load8+0x78/0xa0
devm_clk_release+0x20/0x54
release_nodes+0x84/0x120
devres_release_all+0x144/0x210
device_unbind_cleanup+0x1c/0xac
really_probe+0x2f0/0x5b0
__driver_probe_device+0xc0/0x1f0
driver_probe_device+0x68/0x120
__driver_attach+0x140/0x294
bus_for_each_dev+0xec/0x160
driver_attach+0x38/0x44
bus_add_driver+0x24c/0x300
driver_register+0xf0/0x210
__platform_driver_register+0x48/0x54
asoc_simple_card_init+0x24/0x1000 [snd_soc_simple_card]
do_one_initcall+0xac/0x340
do_init_module+0xd0/0x300
load_module+0x2ba4/0x3100
__do_sys_init_module+0x2c8/0x300
__arm64_sys_init_module+0x48/0x5c
invoke_syscall+0x64/0x190
el0_svc_common.constprop.0+0x124/0x154
do_el0_svc+0x44/0xdc
el0_svc+0x14/0x50
el0t_64_sync_handler+0xec/0x11c
el0t_64_sync+0x14c/0x150
Allocated by task 287:
kasan_save_stack+0x38/0x60
kasan_set_track+0x28/0x40
kasan_save_alloc_info+0x20/0x30
__kasan_kmalloc+0xac/0xb0
__kmalloc_node_track_caller+0x6c/0x1c4
__devres_alloc_node+0x44/0xb4
devm_get_clk_from_child+0x44/0xa0
asoc_simple_parse_clk+0x1b8/0x1dc [snd_soc_simple_card_utils]
simple_parse_node.isra.0+0x1ec/0x230 [snd_soc_simple_card]
simple_dai_link_of+0x1bc/0x334 [snd_soc_simple_card]
__simple_for_each_link+0x2ec/0x320 [snd_soc_simple_card]
asoc_simple_probe+0x468/0x4dc [snd_soc_simple_card]
platform_probe+0x90/0xf0
really_probe+0x118/0x5b0
__driver_probe_device+0xc0/0x1f0
driver_probe_device+0x68/0x120
__driver_attach+0x140/0x294
bus_for_each_dev+0xec/0x160
driver_attach+0x38/0x44
bus_add_driver+0x24c/0x300
driver_register+0xf0/0x210
__platform_driver_register+0x48/0x54
asoc_simple_card_init+0x24/0x1000 [snd_soc_simple_card]
do_one_initcall+0xac/0x340
do_init_module+0xd0/0x300
load_module+0x2ba4/0x3100
__do_sys_init_module+0x2c8/0x300
__arm64_sys_init_module+0x48/0x5c
invoke_syscall+0x64/0x190
el0_svc_common.constprop.0+0x124/0x154
do_el0_svc+0x44/0xdc
el0_svc+0x14/0x50
el0t_64_sync_handler+0xec/0x11c
el0t_64_sync+0x14c/0x150
The buggy address belongs to the object at ffffff800ee09600
which belongs to the cache kmalloc-256 of size 256
The buggy address is located 136 bytes inside of
256-byte region [ffffff800ee09600, ffffff800ee09700)
The buggy address belongs to the physical page:
page:000000002d97303b refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x4ee08
head:000000002d97303b order:1 compound_mapcount:0 compound_pincount:0
flags: 0x10200(slab|head|zone=0)
raw: 0000000000010200 0000000000000000 dead000000000122 ffffff8002c02480
raw: 0000000000000000 0000000080100010 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffffff800ee09580: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffffff800ee09600: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>ffffff800ee09680: 00 fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
^
ffffff800ee09700: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffffff800ee09780: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
==================================================================
Fixes: abae8e57e4 ("clk: generalize devm_clk_get() a bit")
Signed-off-by: Andrey Skvortsov <andrej.skvortzov@gmail.com>
Link: https://lore.kernel.org/r/20230805084847.3110586-1-andrej.skvortzov@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Convert platform_get_resource(), devm_ioremap_resource() to a single
call to devm_platform_get_and_ioremap_resource(), as this is exactly
what this function does.
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Link: https://lore.kernel.org/r/20230705065313.67043-10-frank.li@vivo.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The number of clocks should not be in the dt binding as it is not used
by the respective device tree and thus needlessly bloats the ABI.
Move this number of clocks into the driver source.
Signed-off-by: Duje Mihanović <duje.mihanovic@skole.hr>
Link: https://lore.kernel.org/r/20230812-mmp-nr-clks-v2-4-f9271bd7eaa5@skole.hr
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The number of clocks should not be in the dt binding as it is not used
by the respective device tree and thus needlessly bloats the ABI.
Move this number of clocks into the driver source.
Signed-off-by: Duje Mihanović <duje.mihanovic@skole.hr>
Link: https://lore.kernel.org/r/20230812-mmp-nr-clks-v2-3-f9271bd7eaa5@skole.hr
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The number of clocks should not be in the dt binding as it is not used
by the respective device tree and thus needlessly bloats the ABI.
Move this number of clocks into the driver source.
Signed-off-by: Duje Mihanović <duje.mihanovic@skole.hr>
Link: https://lore.kernel.org/r/20230812-mmp-nr-clks-v2-2-f9271bd7eaa5@skole.hr
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
