IPQ8074 requires the PHY to be powered on before accessing DBI registers.
It's not clear whether other variants have the same dependency, but there
seems to be no reason for them to be different, so move all the DBI
accesses from .init() to .post_init() so they are all after phy_power_on().
[bhelgaas: commit log]
Link: https://lore.kernel.org/r/20220623155004.688090-2-robimarko@gmail.com
Signed-off-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Currently the Gen2 port in IPQ8074 will cause the system to hang as it
accesses DBI registers in qcom_pcie_init_2_3_3(), and those are only
accesible after phy_power_on().
Move the DBI read/writes to a new qcom_pcie_post_init_2_3_3(), which is
executed after phy_power_on().
Link: https://lore.kernel.org/r/20220623155004.688090-1-robimarko@gmail.com
Fixes: a0fd361db8 ("PCI: dwc: Move "dbi", "dbi2", and "addr_space" resource setup into common code")
Signed-off-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: stable@vger.kernel.org # v5.11+
We currently enable clocks BEFORE we write to PARF_PHY_CTRL reg to enable
clocks and resets. This causes the driver to never set to a ready state
with the error 'Phy link never came up'.
This is caused by the PHY clock getting enabled before setting the required
bits in the PARF regs.
A workaround for this was set but with this new discovery we can drop
the workaround and use a proper solution to the problem by just enabling
the clock only AFTER the PARF_PHY_CTRL bit is set.
This correctly sets up the PCIe link and makes it usable even when a
bootloader leaves the PCIe link in an undefined state.
Fixes: 82a823833f ("PCI: qcom: Add Qualcomm PCIe controller driver")
Link: https://lore.kernel.org/r/20220708222743.27019-1-ansuelsmth@gmail.com
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Previously we iterated over AER stat *names*, e.g.,
aer_correctable_error_string[32], but the actual stat *counters* may not be
that large, e.g., pdev->aer_stats->dev_cor_errs[16], which means that we
printed junk in the sysfs stats files.
Iterate over the stat counter arrays instead of the names to avoid this
junk.
Also, added a build time check to make sure all
counters have entries in strings array.
Fixes: 0678e3109a ("PCI/AER: Simplify __aer_print_error()")
Link: https://lore.kernel.org/r/20220509181441.31884-1-mkhalfella@purestorage.com
Reported-by: Meeta Saggi <msaggi@purestorage.com>
Signed-off-by: Mohamed Khalfella <mkhalfella@purestorage.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Meeta Saggi <msaggi@purestorage.com>
Reviewed-by: Eric Badger <ebadger@purestorage.com>
Cc: stable@vger.kernel.org
If we have native control of AER, set the following error reporting enable
bits:
- Correctable Error Reporting Enable
- Non-Fatal Error Reporting Enable
- Fatal Error Reporting Enable
- Unsupported Request Reporting Enable
Note that these bits are all in the Device Control register and are not
AER-specific.
This affects all devices with an AER capability, including hot-added
devices.
Please note that this change is quite invasive, as error reporting now will
be enabled for all available PCIe Endpoints, which was previously not the
case.
When "pci=noaer" is selected, error reporting stays disabled of course.
[bhelgaas: commit log, note error reporting is not AER-specific]
Link: https://lore.kernel.org/r/20220125071820.2247260-4-sr@denx.de
Signed-off-by: Stefan Roese <sr@denx.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Pali Rohár <pali@kernel.org>
Cc: Bharat Kumar Gogada <bharat.kumar.gogada@xilinx.com>
Cc: Michal Simek <michal.simek@xilinx.com>
Cc: Yao Hongbo <yaohongbo@linux.alibaba.com>
Cc: Naveen Naidu <naveennaidu479@gmail.com>
AER reporting is currently disabled in the DevCtl registers of all non Root
Port PCIe devices on systems using pcie_ports_native || host->native_aer,
disabling AER completely in such systems. This is because 2bd50dd800
("PCI: PCIe: Disable PCIe port services during port initialization"), added
a call to pci_disable_pcie_error_reporting() *after* the AER setup was
completed for the PCIe device tree.
Here a longer analysis about the current status of AER enabling /
disabling upon bootup provided by Bjorn:
pcie_portdrv_probe
pcie_port_device_register
get_port_device_capability
pci_disable_pcie_error_reporting
clear CERE NFERE FERE URRE # <-- disable for RP USP DSP
pcie_device_init
device_register # new AER service device
aer_probe
aer_enable_rootport # RP only
set_downstream_devices_error_reporting
set_device_error_reporting # self (RP)
if (RP || USP || DSP)
pci_enable_pcie_error_reporting
set CERE NFERE FERE URRE # <-- enable for RP
pci_walk_bus
set_device_error_reporting
if (RP || USP || DSP)
pci_enable_pcie_error_reporting
set CERE NFERE FERE URRE # <-- enable for USP DSP
In a typical Root Port -> Endpoint hierarchy, the above:
- Disables Error Reporting for the Root Port,
- Enables Error Reporting for the Root Port,
- Does NOT enable Error Reporting for the Endpoint because it is not a
Root Port or Switch Port.
In a deeper Root Port -> Upstream Switch Port -> Downstream Switch
Port -> Endpoint hierarchy:
- Disables Error Reporting for the Root Port,
- Enables Error Reporting for the Root Port,
- Enables Error Reporting for both Switch Ports,
- Does NOT enable Error Reporting for the Endpoint because it is not a
Root Port or Switch Port,
- Disables Error Reporting for the Switch Ports when pcie_portdrv_probe()
claims them. AER does not re-enable it because these are not Root
Ports.
Remove this call to pci_disable_pcie_error_reporting() from
get_port_device_capability(), leaving the already enabled AER configuration
intact. With this change, AER is enabled in the Root Port and the PCIe
switch upstream and downstream ports. Only the PCIe Endpoints don't have
AER enabled yet. A follow-up patch will take care of this Endpoint
enabling.
Fixes: 2bd50dd800 ("PCI: PCIe: Disable PCIe port services during port initialization")
Link: https://lore.kernel.org/r/20220125071820.2247260-3-sr@denx.de
Signed-off-by: Stefan Roese <sr@denx.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Pali Rohár <pali@kernel.org>
Cc: Rafael J. Wysocki <rjw@rjwysocki.net>
Cc: Bharat Kumar Gogada <bharat.kumar.gogada@xilinx.com>
Cc: Michal Simek <michal.simek@xilinx.com>
Cc: Yao Hongbo <yaohongbo@linux.alibaba.com>
Cc: Naveen Naidu <naveennaidu479@gmail.com>
pcie_aspm_support_enabled() is used only by the acpi/pci_root.c driver,
which cannot be built as a module, so it does not need to be exported.
Unexport it.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Some PCI Endpoint controllers integrate an eDMA (embedded DMA). eDMA can
bypass the outbound memory address translation unit to access all RC memory
space.
Add eDMA support for pci-epf-test.
Depending on HW availability, the EPF test can use either eDMA or general
system DMA controllers to perform DMA. The test tries to use eDMA first and
falls back to general system DMA controllers if there's no eDMA
Separate dma_chan to dma_chan_tx and dma_chan_rx. Search for an eDMA
channel first, then search for a memory-to-memory DMA channel. If general
memory to memory channels are used, dma_chan_rx = dma_chan_tx.
Add dma_addr_t dma_remote in pci_epf_test_data_transfer() because eDMA uses
remote RC physical address directly.
Add enum dma_transfer_direction dir in pci_epf_test_data_transfer() because
eDMA chooses the correct RX/TX channel by dir.
The overall steps are:
1. Execute dma_request_channel() and filter function to find correct eDMA
RX and TX Channel. If a channel does not exist, fallback to try to
allocate general memory to memory DMA channel.
2. Execute dmaengine_slave_config() to configure remote side physical
address.
3. Execute dmaengine_prep_slave_single() to create transfer descriptor.
4. Execute tx_submit().
5. Execute dma_async_issue_pending()
[bhelgaas: squash in fix from Dan Carpenter <dan.carpenter@oracle.com>:
https://lore.kernel.org/r/Ys2GSTnZhuLzzQG5@kili, also previously posted by
Peng Wu <wupeng58@huawei.com>:
https://lore.kernel.org/all/CANXvt5rK98-cEMgpzopY9POOK8a5=VDib8uKPLgJakOG=hRfwQ@mail.gmail.com/]
Link: https://lore.kernel.org/r/20220524152159.2370739-9-Frank.Li@nxp.com
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
Acked-By: Vinod Koul <vkoul@kernel.org>
pcie_aspm_pm_state_change() was introduced at the inception of PCIe ASPM
code, but it can cause some issues. For instance, when ASPM config is
changed via sysfs, those changes won't persist across power state change
because pcie_aspm_pm_state_change() overwrites them.
Also, if the driver restores L1SS [1] after system resume, the restored
state will also be overwritten by pcie_aspm_pm_state_change().
Remove pcie_aspm_pm_state_change(). If there's any hardware that really
needs it to function, a quirk can be used instead.
[1] https://lore.kernel.org/linux-pci/20220201123536.12962-1-vidyas@nvidia.com/
Link: https://lore.kernel.org/r/20220509073639.2048236-1-kai.heng.feng@canonical.com
[bhelgaas: remove additional pcie_aspm_pm_state_change() call in
pci_set_low_power_state(), added by
10aa5377fc ("PCI/PM: Split pci_raw_set_power_state()") and moved by
7957d20145 ("PCI/PM: Relocate pci_set_low_power_state()")]
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Move pcie_set_ecrc_checking() to pci_aer_init() to make sure that
pcie_set_ecrc_checking() is called for each PCIe device, including
hot-added devices.
Link: https://lore.kernel.org/r/20220125071820.2247260-2-sr@denx.de
Signed-off-by: Stefan Roese <sr@denx.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Pali Rohár <pali@kernel.org>
Cc: Bharat Kumar Gogada <bharat.kumar.gogada@xilinx.com>
Cc: Michal Simek <michal.simek@xilinx.com>
Cc: Yao Hongbo <yaohongbo@linux.alibaba.com>
Cc: Naveen Naidu <naveennaidu479@gmail.com>
The cpumask that is passed to this function ultimately comes from
irq_data_get_effective_affinity_mask(), which was recently changed to
return a const cpumask pointer. The first level of functions handling
the affinity mask were updated, but not this helper function.
Fixes: 4d0b829881 ("genirq: Return a const cpumask from irq_data_get_affinity_mask")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220708004931.1672-1-samuel@sholland.org
Now that the irq_data_update_affinity helper exists, enforce its use
by returning a a const cpumask from irq_data_get_affinity_mask.
Since the previous commit already updated places that needed to call
irq_data_update_affinity, this commit updates the remaining code that
either did not modify the cpumask or immediately passed the modified
mask to irq_set_affinity.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220701200056.46555-8-samuel@sholland.org
Unbinding an endpoint function from the endpoint controller shouldn't stop
the controller. This is especially a problem for multi-function endpoints
where other endpoints may still be active.
Don't stop the controller when unbinding one of its endpoints. Normally
the controller is stopped via configfs.
Fixes: 349e7a85b2 ("PCI: endpoint: functions: Add an EP function to test PCI")
Link: https://lore.kernel.org/r/20220622040924.113279-1-mie@igel.co.jp
Signed-off-by: Shunsuke Mie <mie@igel.co.jp>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
We have stubs for most OF interfaces even when CONFIG_OF is not set, so we
allow building of most controller drivers in that case for compile testing.
When CONFIG_OF is not set, "of_match_ptr(<match_table>)" compiles to NULL,
which leaves <match_table> unused, resulting in errors like this:
$ make W=1
drivers/pci/controller/pci-xgene.c:636:34: error: ‘xgene_pcie_match_table’ defined but not used [-Werror=unused-const-variable=]
Drop of_match_ptr() to avoid the unused variable warning.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
The dw_plat_pcie_of_match[] forward declaration was required when
dw_plat_pcie_probe() called of_match_device(). 5c204204cf ("PCI:
designware-plat: Prefer of_device_get_match_data()") replaced that with
of_device_get_match_data(), which no longer needs the declaration.
Drop the unnecessary forward declaration.
[bhelgaas: commit log]
Link: https://lore.kernel.org/r/20220624143428.8334-19-Sergey.Semin@baikalelectronics.ru
Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
1d906b2207 ("PCI: dwc: Add support for EP mode") added the struct
dw_plat_pcie regmap pointer, but it has never been used. Remove it.
[bhelgaas: commit log]
Link: https://lore.kernel.org/r/20220624143428.8334-18-Sergey.Semin@baikalelectronics.ru
Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Save the return value in "ret" for all three cases (DW_PCIE_RC_TYPE,
DW_PCIE_EP_TYPE, default) handled by dw_plat_pcie_probe() and return from a
single place.
[bhelgaas: commit log]
Link: https://lore.kernel.org/r/20220624143428.8334-17-Sergey.Semin@baikalelectronics.ru
Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
All of the DW PCIe core driver entities except the pcie_port struct have
names with the "dw_" prefix to distinguish local and common PCIe name
spaces, and endpoint-related entities have an "_ep" suffix.
Rename struct pcie_port to dw_pcie_rp to make it more consistent with other
names.
[bhelgaas: commit log]
Link: https://lore.kernel.org/r/20220624143428.8334-16-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>
The io_cfg_atu_shared flag is set if there is an outbound iATU window used
for both config space accesses and IO port transfers.
Since the flag semantic is purely Root Port specific, it's not used in
either the DW PCIe common code or in the DW PCIe Endpoint driver. Move it
to the struct pcie_port and rename to cfg0_io_shared.
[bhelgaas: commit log]
Link: https://lore.kernel.org/r/20220624143428.8334-15-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Factor out this pattern:
if (!pci->ops || !pci->ops->start_link)
return -EINVAL;
return pci->ops->start_link(pci);
into a new dw_pcie_start_link() wrapper and do the same for the stop_link()
method.
Note that dw_pcie_ep_start() previously returned -EINVAL if there was no
platform start_link() method, which didn't make much sense since that is
not an error. It will now return 0 in that case.
As a side-effect, drop the empty start_link() and dummy dw_pcie_ops
instances from the generic DW PCIe and Layerscape EP platform drivers.
[bhelgaas: commit log]
Link: https://lore.kernel.org/r/20220624143428.8334-14-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
dw_pcie_host_init() has two instances of the resource structure pointers
used in unrelated places. It's pointless to have two different local
storages for them since the corresponding code is small and having
resource-specific names doesn't make it more readable.
Convert these parts of the function to use a common pointer to the
resource structure instance.
Link: https://lore.kernel.org/r/20220624143428.8334-13-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
There are several places in the common DW PCIe code with incoherent local
variable usage: a variable is defined and initialized with a structure
field, but the structure pointer is dereferenced to access that field
anyway; the local variable is defined and initialized but either used just
once or not used afterwards in the main part of the subsequent method. It
mainly concerns the pcie_port.dev field. Fix that in the relevant places.
Link: https://lore.kernel.org/r/20220624143428.8334-12-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
While the rest of the generic DWC PCIe code uses the dedicated IO-mem
accessors, the dw_pcie_link_up() method for some unobvious reason directly
calls readl() to get PortLogic.DEBUG1 register content. Since the way the
DBI bus is accessed can be platform-specific, use dw_pcie_readl_dbi()
instead so dw_pcie_link_up() is slightly more generic.
Link: https://lore.kernel.org/r/20220624143428.8334-11-Sergey.Semin@baikalelectronics.ru
Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
The unrolled version of the internal ATU has been available since the DWC
PCIe v4.80a IP core, but it may not be enabled. Per [1], if unrolled ATU
is enabled, the PCIE_ATU_VIEWPORT does not exist and reads as 0xffffffff;
while if unrolled ATU is disabled, PCIE_ATU_VIEWPORT will contain some
zeros.
Simplify dw_pcie_iatu_unroll_enabled() by checking the value of
PCIE_ATU_VIEWPORT.
[1] DesignWare Cores, PCI Express Controller, Register Desciptions,
v.4.90a, December 2016, p.855
[bhelgaas: commit log]
Link: https://lore.kernel.org/r/20220624143428.8334-10-Sergey.Semin@baikalelectronics.ru
Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
If the "snps,enable-cdm-check" property exists, we should enable the CDM
check. But previously dw_pcie_setup() could exit before doing so if the
"num-lanes" property was absent or invalid.
Move the CDM enable earlier so we do it regardless of whether "num-lanes"
is present.
[bhelgaas: commit log]
Fixes: 07f123def7 ("PCI: dwc: Add support to enable CDM register check")
Link: https://lore.kernel.org/r/20220624143428.8334-7-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Vidya Sagar <vidyas@nvidia.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
If dw_pcie_ep_init() fails to perform any action after the EPC memory is
initialized and the MSI memory region is allocated, the latter parts won't
be undone thus causing a memory leak. Add a cleanup-on-error path to fix
these leaks.
[bhelgaas: commit log]
Fixes: 2fd0c9d966 ("PCI: designware-ep: Pre-allocate memory for MSI in dw_pcie_ep_init")
Link: https://lore.kernel.org/r/20220624143428.8334-6-Sergey.Semin@baikalelectronics.ru
Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
We program the 64-bit ATU limit address (in PCIE_ATU_LIMIT/
PCIE_ATU_UPPER_LIMIT or PCIE_ATU_UNR_LOWER_LIMIT/PCIE_ATU_UNR_UPPER_LIMIT),
but in addition, the PCIE_ATU_INCREASE_REGION_SIZE bit must be set if the
upper 32 bits of the limit address differ from the upper 32 bits of the
base address (see [1,2]).
5b4cf0f653 ("PCI: dwc: Add upper limit address for outbound iATU") set
PCIE_ATU_INCREASE_REGION_SIZE, but only when the *size* was greater than
4GB. It did not set it when a smaller region crossed a 4GB boundary, e.g.,
[mem 0x0_f0000000-0x1_0fffffff].
Set PCIE_ATU_INCREASE_REGION_SIZE whenever PCIE_ATU_UPPER_LIMIT is
greater than PCIE_ATU_UPPER_BASE.
[1] DesignWare Cores PCI Express Controller Databook - DWC PCIe Root Port,
v5.40a, March 2019, fig.3-36, p.175
[2] DesignWare Cores PCI Express Controller Databook - DWC PCIe Root Port,
v5.40a, March 2019, fig.3-37, p.176
[bhelgaas: commit log]
Fixes: 5b4cf0f653 ("PCI: dwc: Add upper limit address for outbound iATU")
Link: https://lore.kernel.org/r/20220624143428.8334-5-Sergey.Semin@baikalelectronics.ru
Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Some DWC-based controllers (e.g., pcie-al.c and pci-keystone.c, identified
by the fact that they override the default dw_child_pcie_ops) use their own
address translation approach instead of the DWC internal ATU (iATU). For
those controllers, skip disabling the iATU outbound windows.
[bhelgaas: commit log, update multiple window comment]
Fixes: 458ad06c4c ("PCI: dwc: Ensure all outbound ATU windows are reset")
Link: https://lore.kernel.org/r/20220624143428.8334-4-Sergey.Semin@baikalelectronics.ru
Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
dw_pcie_disable_atu() was introduced by f8aed6ec62 ("PCI: dwc:
designware: Add EP mode support") and supported only the viewport version
of the iATU CSRs.
DW PCIe IP cores v4.80a and newer also support unrolled iATU/eDMA space.
Callers of dw_pcie_disable_atu(), including pci_epc_ops.clear_bar(),
pci_epc_ops.unmap_addr(), and dw_pcie_setup_rc(), don't work correctly when
it is enabled.
Add dw_pcie_disable_atu() support for controllers with unrolled iATU CSRs
enabled.
[bhelgaas: commit log]
Fixes: f8aed6ec62 ("PCI: dwc: designware: Add EP mode support")
Link: https://lore.kernel.org/r/20220624143428.8334-3-Sergey.Semin@baikalelectronics.ru
Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
It's logically correct to undo everything that was done when an error is
discovered or in the corresponding cleanup counterpart. Otherwise the host
controller will be left in an undetermined state. Since the link is set up
in the host_init method, deactivate it there in the cleanup-on-error block
and stop the link in the antagonistic routine - dw_pcie_host_deinit(). Link
deactivation is platform-specific and should be implemented in
dw_pcie_ops.stop_link().
Fixes: 886a9c1347 ("PCI: dwc: Move link handling into common code")
Link: https://lore.kernel.org/r/20220624143428.8334-2-Sergey.Semin@baikalelectronics.ru
Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Add support for VMD devices in MTL-H/P/U/S/M with bus restriction mode and
vector 0 disabled for MSI-X remapping.
Link: https://lore.kernel.org/r/20220628221023.190547-1-francisco.munoz.ruiz@linux.intel.com
Signed-off-by: Francisco Munoz <francisco.munoz.ruiz@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Nirmal Patel <nirmal.patel@linux.intel.com>
Add Renesas RZ/N1 SOC family support to the Renesas R-Car Gen2 PCI bridge
driver.
The Renesas RZ/N1 SOC internal PCI bridge is compatible with the one in the
R-Car Gen2 family.
Tested with the RZ/N1D (R9A06G032) SOC.
Link: https://lore.kernel.org/r/20220520094155.313784-4-herve.codina@bootlin.com
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Rob Herring <robh@kernel.org>
Print current LTSSM state when PCIe link down instead of the register
value to make it easier to get the link status.
Link: https://lore.kernel.org/r/20220329030715.7975-1-jianjun.wang@mediatek.com
Signed-off-by: Jianjun Wang <jianjun.wang@mediatek.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Allow selecting the pcie-mediatek driver if ARCH_AIROHA is set, because the
Airoha EN7523 SoC uses the same controller as MT7622.
The driver itself is not modified. The PCIe controller DT node should use
mediatek,mt7622-pcie after airoha,en7523-pcie.
Link: https://lore.kernel.org/r/20220615125335.96089-2-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Slot capabilities are currently not reported because emulated bridge does
not report the PCI_EXP_FLAGS_SLOT flag.
Set PCI_EXP_FLAGS_SLOT to let the kernel know that PCI_EXP_SLT* registers
are supported.
Move setting of PCI_EXP_SLTCTL register from "dynamic" pcie_conf_read
function to static buffer as it is only statically filled the
PCI_EXP_SLTSTA_PDS flag and dynamic read callback is not needed for this
register.
Set Presence State Bit to 1 since there is no support for unplugging the
card and there is currently no platform able to detect presence of a card -
in such a case the bit needs to be set to 1.
Finally correctly set Physical Slot Number to 1 since there is only one
port and zero value is reserved for ports within the same silicon as Root
Port which is not our case for Aardvark HW.
Link: https://lore.kernel.org/r/20220524132827.8837-3-kabel@kernel.org
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Aardvark controller supports Advanced Error Reporting configuration
registers.
Export these registers on the emulated root bridge via new .read_ext() and
.write_ext() methods.
Note that in the Advanced Error Reporting Capability header the offset to
the next Extended Capability header is set, but it is not documented in
Armada 3700 Functional Specification. Since this change adds support only
for Advanced Error Reporting, explicitly clear PCI_EXT_CAP_NEXT bits in AER
capability header.
Now the pcieport driver correctly detects AER support and allows PCIe AER
driver to start receiving ERR interrupts. Kernel log now says:
pcieport 0000:00:00.0: AER: enabled with IRQ 52
Link: https://lore.kernel.org/r/20220524132827.8837-2-kabel@kernel.org
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
The Broadcom BCM5750x NICs may be multi-function devices. They do not
advertise ACS capability. Peer-to-peer transactions are not possible
between the individual functions, so it is safe to treat them as fully
isolated.
Add an ACS quirk for these devices so the functions can be in independent
IOMMU groups and attached individually to userspace applications using
VFIO.
Link: https://lore.kernel.org/r/1654796507-28610-1-git-send-email-michael.chan@broadcom.com
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Use ida_alloc() and ida_free() instead of deprecated ida_simple_get() and
ida_simple_remove().
Link: https://lore.kernel.org/r/20220602071115.3833935-1-liuke94@huawei.com
Signed-off-by: Ke Liu <liuke94@huawei.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Logan Gunthorpe <logang@deltatee.com>
of_get_child_by_name() returns a node pointer with refcount incremented, so
we should use of_node_put() on it when we don't need it anymore.
Add missing of_node_put() to avoid refcount leak.
Fixes: 814cceebba ("PCI: mediatek-gen3: Add INTx support")
Link: https://lore.kernel.org/r/20220601041259.56185-1-linmq006@gmail.com
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Miles Chen <miles.chen@mediatek.com>
Acked-by: Jianjun Wang <jianjun.wang@mediatek.com>
pm_runtime_enable() will increase power disable depth. If
dw_pcie_ep_init() fails, we should use pm_runtime_disable() to balance it
with pm_runtime_enable().
Add missing pm_runtime_disable() for tegra_pcie_config_ep().
Fixes: c57247f940 ("PCI: tegra: Add support for PCIe endpoint mode in Tegra194")
Link: https://lore.kernel.org/r/20220602031910.55859-1-linmq006@gmail.com
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Vidya Sagar <vidyas@nvidia.com>
of_get_next_child() returns a node pointer with refcount incremented, so we
should use of_node_put() on it when we don't need it anymore.
mc_pcie_init_irq_domains() only calls of_node_put() in the normal path,
missing it in some error paths. Add missing of_node_put() to avoid
refcount leak.
Fixes: 6f15a9c9f9 ("PCI: microchip: Add Microchip PolarFire PCIe controller driver")
Link: https://lore.kernel.org/r/20220605055123.59127-1-linmq006@gmail.com
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Rob Herring <robh@kernel.org>
When a device is already unplugged by pciehp by the time the AER handler is
invoked, the PCIe device will already be in the pci_channel_io_perm_failure
state. In that case simply return PCI_ERS_RESULT_DISCONNECT instead of
trying to do a state transition that will fail.
Also untangle the state transition failure from the lack of methods to
improve the debugging output in case it happens again.
Link: https://lore.kernel.org/r/20220601074024.3481035-1-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Here is the set of driver core changes for 5.19-rc1.
Note, I'm not really happy with this pull request as-is, see below for
details, but overall this is all good for everything but a small set of
systems, which we have a fix for already.
Lots of tiny driver core changes and cleanups happened this cycle,
but the two major things were:
- firmware_loader reorganization and additions including the
ability to have XZ compressed firmware images and the ability
for userspace to initiate the firmware load when it needs to,
instead of being always initiated by the kernel. FPGA devices
specifically want this ability to have their firmware changed
over the lifetime of the system boot, and this allows them to
work without having to come up with yet-another-custom-uapi
interface for loading firmware for them.
- physical location support added to sysfs so that devices that
know this information, can tell userspace where they are
located in a common way. Some ACPI devices already support
this today, and more bus types should support this in the
future.
Smaller changes included:
- driver_override api cleanups and fixes
- error path cleanups and fixes
- get_abi script fixes
- deferred probe timeout changes.
It's that last change that I'm the most worried about. It has been
reported to cause boot problems for a number of systems, and I have a
tested patch series that resolves this issue. But I didn't get it
merged into my tree before 5.18-final came out, so it has not gotten any
linux-next testing.
I'll send the fixup patches (there are 2) as a follow-on series to this
pull request if you want to take them directly, _OR_ I can just revert
the probe timeout changes and they can wait for the next -rc1 merge
cycle. Given that the fixes are tested, and pretty simple, I'm leaning
toward that choice. Sorry this all came at the end of the merge window,
I should have resolved this all 2 weeks ago, that's my fault as it was
in the middle of some travel for me.
All have been tested in linux-next for weeks, with no reported issues
other than the above-mentioned boot time outs.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYpnv/A8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yk/fACgvmenbo5HipqyHnOmTQlT50xQ9EYAn2eTq6ai
GkjLXBGNWOPBa5cU52qf
=yEi/
-----END PGP SIGNATURE-----
Merge tag 'driver-core-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the set of driver core changes for 5.19-rc1.
Lots of tiny driver core changes and cleanups happened this cycle, but
the two major things are:
- firmware_loader reorganization and additions including the ability
to have XZ compressed firmware images and the ability for userspace
to initiate the firmware load when it needs to, instead of being
always initiated by the kernel. FPGA devices specifically want this
ability to have their firmware changed over the lifetime of the
system boot, and this allows them to work without having to come up
with yet-another-custom-uapi interface for loading firmware for
them.
- physical location support added to sysfs so that devices that know
this information, can tell userspace where they are located in a
common way. Some ACPI devices already support this today, and more
bus types should support this in the future.
Smaller changes include:
- driver_override api cleanups and fixes
- error path cleanups and fixes
- get_abi script fixes
- deferred probe timeout changes.
It's that last change that I'm the most worried about. It has been
reported to cause boot problems for a number of systems, and I have a
tested patch series that resolves this issue. But I didn't get it
merged into my tree before 5.18-final came out, so it has not gotten
any linux-next testing.
I'll send the fixup patches (there are 2) as a follow-on series to this
pull request.
All have been tested in linux-next for weeks, with no reported issues
other than the above-mentioned boot time-outs"
* tag 'driver-core-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (55 commits)
driver core: fix deadlock in __device_attach
kernfs: Separate kernfs_pr_cont_buf and rename_lock.
topology: Remove unused cpu_cluster_mask()
driver core: Extend deferred probe timeout on driver registration
MAINTAINERS: add Russ Weight as a firmware loader maintainer
driver: base: fix UAF when driver_attach failed
test_firmware: fix end of loop test in upload_read_show()
driver core: location: Add "back" as a possible output for panel
driver core: location: Free struct acpi_pld_info *pld
driver core: Add "*" wildcard support to driver_async_probe cmdline param
driver core: location: Check for allocations failure
arch_topology: Trace the update thermal pressure
kernfs: Rename kernfs_put_open_node to kernfs_unlink_open_file.
export: fix string handling of namespace in EXPORT_SYMBOL_NS
rpmsg: use local 'dev' variable
rpmsg: Fix calling device_lock() on non-initialized device
firmware_loader: describe 'module' parameter of firmware_upload_register()
firmware_loader: Move definitions from sysfs_upload.h to sysfs.h
firmware_loader: Fix configs for sysfs split
selftests: firmware: Add firmware upload selftests
...
-----BEGIN PGP SIGNATURE-----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=4NaF
-----END PGP SIGNATURE-----
Merge tag 'pci-v5.19-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull pci fixes from Bjorn Helgaas:
- Revert brcmstb patches that broke booting on Raspberry Pi Compute
Module 4 (Bjorn Helgaas)
- Fix bridge_d3_blacklist[] error that overwrote the existing Gigabyte
X299 entry instead of adding a new one (Bjorn Helgaas)
- Update Lorenzo Pieralisi's email address in MAINTAINERS (Lorenzo
Pieralisi)
* tag 'pci-v5.19-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
MAINTAINERS: Update Lorenzo Pieralisi's email address
PCI/PM: Fix bridge_d3_blacklist[] Elo i2 overwrite of Gigabyte X299
Revert "PCI: brcmstb: Split brcm_pcie_setup() into two funcs"
Revert "PCI: brcmstb: Add mechanism to turn on subdev regulators"
Revert "PCI: brcmstb: Add control of subdevice voltage regulators"
Revert "PCI: brcmstb: Do not turn off WOL regulators on suspend"
92597f97a4 ("PCI/PM: Avoid putting Elo i2 PCIe Ports in D3cold") omitted
braces around the new Elo i2 entry, so it overwrote the existing Gigabyte
X299 entry. Add the appropriate braces.
Found by:
$ make W=1 drivers/pci/pci.o
CC drivers/pci/pci.o
drivers/pci/pci.c:2974:12: error: initialized field overwritten [-Werror=override-init]
2974 | .ident = "Elo i2",
| ^~~~~~~~
Link: https://lore.kernel.org/r/20220526221258.GA409855@bhelgaas
Fixes: 92597f97a4 ("PCI/PM: Avoid putting Elo i2 PCIe Ports in D3cold")
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org # v5.15+
This reverts commit 830aa6f29f.
This is part of a revert of the following commits:
11ed8b8624 ("PCI: brcmstb: Do not turn off WOL regulators on suspend")
93e41f3fca ("PCI: brcmstb: Add control of subdevice voltage regulators")
67211aadcb ("PCI: brcmstb: Add mechanism to turn on subdev regulators")
830aa6f29f ("PCI: brcmstb: Split brcm_pcie_setup() into two funcs")
Cyril reported that 830aa6f29f ("PCI: brcmstb: Split brcm_pcie_setup()
into two funcs"), which appeared in v5.17-rc1, broke booting on the
Raspberry Pi Compute Module 4. Apparently 830aa6f29f panics with an
Asynchronous SError Interrupt, and after further commits here is a black
screen on HDMI and no output on the serial console.
This does not seem to affect the Raspberry Pi 4 B.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215925
Link: https://lore.kernel.org/r/20220511201856.808690-5-helgaas@kernel.org
Reported-by: Cyril Brulebois <kibi@debian.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
This reverts commit 67211aadcb.
This is part of a revert of the following commits:
11ed8b8624 ("PCI: brcmstb: Do not turn off WOL regulators on suspend")
93e41f3fca ("PCI: brcmstb: Add control of subdevice voltage regulators")
67211aadcb ("PCI: brcmstb: Add mechanism to turn on subdev regulators")
830aa6f29f ("PCI: brcmstb: Split brcm_pcie_setup() into two funcs")
Cyril reported that 830aa6f29f ("PCI: brcmstb: Split brcm_pcie_setup()
into two funcs"), which appeared in v5.17-rc1, broke booting on the
Raspberry Pi Compute Module 4. Apparently 830aa6f29f panics with an
Asynchronous SError Interrupt, and after further commits here is a black
screen on HDMI and no output on the serial console.
This does not seem to affect the Raspberry Pi 4 B.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215925
Link: https://lore.kernel.org/r/20220511201856.808690-4-helgaas@kernel.org
Reported-by: Cyril Brulebois <kibi@debian.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
This reverts commit 93e41f3fca.
This is part of a revert of the following commits:
11ed8b8624 ("PCI: brcmstb: Do not turn off WOL regulators on suspend")
93e41f3fca ("PCI: brcmstb: Add control of subdevice voltage regulators")
67211aadcb ("PCI: brcmstb: Add mechanism to turn on subdev regulators")
830aa6f29f ("PCI: brcmstb: Split brcm_pcie_setup() into two funcs")
Cyril reported that 830aa6f29f ("PCI: brcmstb: Split brcm_pcie_setup()
into two funcs"), which appeared in v5.17-rc1, broke booting on the
Raspberry Pi Compute Module 4. Apparently 830aa6f29f panics with an
Asynchronous SError Interrupt, and after further commits here is a black
screen on HDMI and no output on the serial console.
This does not seem to affect the Raspberry Pi 4 B.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215925
Link: https://lore.kernel.org/r/20220511201856.808690-3-helgaas@kernel.org
Reported-by: Cyril Brulebois <kibi@debian.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
This reverts commit 11ed8b8624.
This is part of a revert of the following commits:
11ed8b8624 ("PCI: brcmstb: Do not turn off WOL regulators on suspend")
93e41f3fca ("PCI: brcmstb: Add control of subdevice voltage regulators")
67211aadcb ("PCI: brcmstb: Add mechanism to turn on subdev regulators")
830aa6f29f ("PCI: brcmstb: Split brcm_pcie_setup() into two funcs")
Cyril reported that 830aa6f29f ("PCI: brcmstb: Split brcm_pcie_setup()
into two funcs"), which appeared in v5.17-rc1, broke booting on the
Raspberry Pi Compute Module 4. Apparently 830aa6f29f panics with an
Asynchronous SError Interrupt, and after further commits here is a black
screen on HDMI and no output on the serial console.
This does not seem to affect the Raspberry Pi 4 B.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215925
Link: https://lore.kernel.org/r/20220511201856.808690-2-helgaas@kernel.org
Reported-by: Cyril Brulebois <kibi@debian.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Including:
- Intel VT-d driver updates
- Domain force snooping improvement.
- Cleanups, no intentional functional changes.
- ARM SMMU driver updates
- Add new Qualcomm device-tree compatible strings
- Add new Nvidia device-tree compatible string for Tegra234
- Fix UAF in SMMUv3 shared virtual addressing code
- Force identity-mapped domains for users of ye olde SMMU
legacy binding
- Minor cleanups
- Patches to fix a BUG_ON in the vfio_iommu_group_notifier
- Groundwork for upcoming iommufd framework
- Introduction of DMA ownership so that an entire IOMMU group
is either controlled by the kernel or by user-space
- MT8195 and MT8186 support in the Mediatek IOMMU driver
- Patches to make forcing of cache-coherent DMA more coherent
between IOMMU drivers
- Fixes for thunderbolt device DMA protection
- Various smaller fixes and cleanups
-----BEGIN PGP SIGNATURE-----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=W0hj
-----END PGP SIGNATURE-----
Merge tag 'iommu-updates-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu updates from Joerg Roedel:
- Intel VT-d driver updates:
- Domain force snooping improvement.
- Cleanups, no intentional functional changes.
- ARM SMMU driver updates:
- Add new Qualcomm device-tree compatible strings
- Add new Nvidia device-tree compatible string for Tegra234
- Fix UAF in SMMUv3 shared virtual addressing code
- Force identity-mapped domains for users of ye olde SMMU legacy
binding
- Minor cleanups
- Fix a BUG_ON in the vfio_iommu_group_notifier:
- Groundwork for upcoming iommufd framework
- Introduction of DMA ownership so that an entire IOMMU group is
either controlled by the kernel or by user-space
- MT8195 and MT8186 support in the Mediatek IOMMU driver
- Make forcing of cache-coherent DMA more coherent between IOMMU
drivers
- Fixes for thunderbolt device DMA protection
- Various smaller fixes and cleanups
* tag 'iommu-updates-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (88 commits)
iommu/amd: Increase timeout waiting for GA log enablement
iommu/s390: Tolerate repeat attach_dev calls
iommu/vt-d: Remove hard coding PGSNP bit in PASID entries
iommu/vt-d: Remove domain_update_iommu_snooping()
iommu/vt-d: Check domain force_snooping against attached devices
iommu/vt-d: Block force-snoop domain attaching if no SC support
iommu/vt-d: Size Page Request Queue to avoid overflow condition
iommu/vt-d: Fold dmar_insert_one_dev_info() into its caller
iommu/vt-d: Change return type of dmar_insert_one_dev_info()
iommu/vt-d: Remove unneeded validity check on dev
iommu/dma: Explicitly sort PCI DMA windows
iommu/dma: Fix iova map result check bug
iommu/mediatek: Fix NULL pointer dereference when printing dev_name
iommu: iommu_group_claim_dma_owner() must always assign a domain
iommu/arm-smmu: Force identity domains for legacy binding
iommu/arm-smmu: Support Tegra234 SMMU
dt-bindings: arm-smmu: Add compatible for Tegra234 SOC
dt-bindings: arm-smmu: Document nvidia,memory-controller property
iommu/arm-smmu-qcom: Add SC8280XP support
dt-bindings: arm-smmu: Add compatible for Qualcomm SC8280XP
...
-----BEGIN PGP SIGNATURE-----
iQFHBAABCAAxFiEEIbPD0id6easf0xsudhRwX5BBoF4FAmKSSbcTHHdlaS5saXVA
a2VybmVsLm9yZwAKCRB2FHBfkEGgXgJyCACeyMOcFws5lyqqdk0R0zGr2KFfKsJn
YQR9nvldT2p/1y0ykvU208UIq0HHmXOb9pD8gOUzGYGp4XlEaC1f4V37mmzgLcRu
vL/HcFqBl2cQEfaQxiXZrmsIIVszwbc57EGqpl93cS2er4hp/NXmredKCId7Mpt8
FjxjgVGzdhEUKbJZYjkDM5pYAnJ9QVwuK3MaarKMK86Oj1P5YtKgIb4ZSt/NHvsC
Mukx3nivSH29XfK3fRsFDJUQr9WNYh1cmTtyhB0tWVXQCYFc4angZRtCJwyXzkp2
P5GBIQoMZcXX2XWkUBTtA1w5g/aZZsBExb3YGhQjsQP+jb6MtDnvOEo9
=Z2E+
-----END PGP SIGNATURE-----
Merge tag 'hyperv-next-signed-20220528' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull hyperv updates from Wei Liu:
- Harden hv_sock driver (Andrea Parri)
- Harden Hyper-V PCI driver (Andrea Parri)
- Fix multi-MSI for Hyper-V PCI driver (Jeffrey Hugo)
- Fix Hyper-V PCI to reduce boot time (Dexuan Cui)
- Remove code for long EOL'ed Hyper-V versions (Michael Kelley, Saurabh
Sengar)
- Fix balloon driver error handling (Shradha Gupta)
- Fix a typo in vmbus driver (Julia Lawall)
- Ignore vmbus IMC device (Michael Kelley)
- Add a new error message to Hyper-V DRM driver (Saurabh Sengar)
* tag 'hyperv-next-signed-20220528' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: (28 commits)
hv_balloon: Fix balloon_probe() and balloon_remove() error handling
scsi: storvsc: Removing Pre Win8 related logic
Drivers: hv: vmbus: fix typo in comment
PCI: hv: Fix synchronization between channel callback and hv_pci_bus_exit()
PCI: hv: Add validation for untrusted Hyper-V values
PCI: hv: Fix interrupt mapping for multi-MSI
PCI: hv: Reuse existing IRTE allocation in compose_msi_msg()
drm/hyperv: Remove support for Hyper-V 2008 and 2008R2/Win7
video: hyperv_fb: Remove support for Hyper-V 2008 and 2008R2/Win7
scsi: storvsc: Remove support for Hyper-V 2008 and 2008R2/Win7
Drivers: hv: vmbus: Remove support for Hyper-V 2008 and Hyper-V 2008R2/Win7
x86/hyperv: Disable hardlockup detector by default in Hyper-V guests
drm/hyperv: Add error message for fb size greater than allocated
PCI: hv: Do not set PCI_COMMAND_MEMORY to reduce VM boot time
PCI: hv: Fix hv_arch_irq_unmask() for multi-MSI
Drivers: hv: vmbus: Refactor the ring-buffer iterator functions
Drivers: hv: vmbus: Accept hv_sock offers in isolated guests
hv_sock: Add validation for untrusted Hyper-V values
hv_sock: Copy packets sent by Hyper-V out of the ring buffer
hv_sock: Check hv_pkt_iter_first_raw()'s return value
...
-----BEGIN PGP SIGNATURE-----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=hEti
-----END PGP SIGNATURE-----
Merge tag 'pci-v5.19-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull pci updates from Bjorn Helgaas:
"Resource management:
- Restrict E820 clipping to PCI host bridge windows (Bjorn Helgaas)
- Log E820 clipping better (Bjorn Helgaas)
- Add kernel cmdline options to enable/disable E820 clipping (Hans de
Goede)
- Disable E820 reserved region clipping for IdeaPads, Yoga, Yoga
Slip, Acer Spin 5, Clevo Barebone systems where clipping leaves no
usable address space for touchpads, Thunderbolt devices, etc (Hans
de Goede)
- Disable E820 clipping by default starting in 2023 (Hans de Goede)
PCI device hotplug:
- Include files to remove implicit dependencies (Christophe Leroy)
- Only put Root Ports in D3 if they can signal and wake from D3 so
AMD Yellow Carp doesn't miss hotplug events (Mario Limonciello)
Power management:
- Define pci_restore_standard_config() only for CONFIG_PM_SLEEP since
it's unused otherwise (Krzysztof Kozlowski)
- Power up devices completely, including anything platform firmware
needs to do, during runtime resume (Rafael J. Wysocki)
- Move pci_resume_bus() to PM callbacks so we observe the required
bridge power-up delays (Rafael J. Wysocki)
- Drop unneeded runtime_d3cold device flag (Rafael J. Wysocki)
- Split pci_raw_set_power_state() between pci_power_up() and a new
pci_set_low_power_state() (Rafael J. Wysocki)
- Set current_state to D3cold if config read returns ~0, indicating
the device is not accessible (Rafael J. Wysocki)
- Do not call pci_update_current_state() from pci_power_up() so BARs
and ASPM config are restored correctly (Rafael J. Wysocki)
- Write 0 to PMCSR in pci_power_up() in all cases (Rafael J. Wysocki)
- Split pci_power_up() to pci_set_full_power_state() to avoid some
redundant operations (Rafael J. Wysocki)
- Skip restoring BARs if device is not in D0 (Rafael J. Wysocki)
- Rearrange and clarify pci_set_power_state() (Rafael J. Wysocki)
- Remove redundant BAR restores from pci_pm_thaw_noirq() (Rafael J.
Wysocki)
Virtualization:
- Acquire device lock before config space access lock to avoid AB/BA
deadlock with sriov_numvfs_store() (Yicong Yang)
Error handling:
- Clear MULTI_ERR_COR/UNCOR_RCV bits, which a race could previously
leave permanently set (Kuppuswamy Sathyanarayanan)
Peer-to-peer DMA:
- Whitelist Intel Skylake-E Root Ports regardless of which devfn they
are (Shlomo Pongratz)
ASPM:
- Override L1 acceptable latency advertised by Intel DG2 so ASPM L1
can be enabled (Mika Westerberg)
Cadence PCIe controller driver:
- Set up device-specific register to allow PTM Responder to be
enabled by the normal architected bit (Christian Gmeiner)
- Override advertised FLR support since the controller doesn't
implement FLR correctly (Parshuram Thombare)
Cadence PCIe endpoint driver:
- Correct bitmap size for the ob_region_map of outbound window usage
(Dan Carpenter)
Freescale i.MX6 PCIe controller driver:
- Fix PERST# assertion/deassertion so we observe the required delays
before accessing device (Francesco Dolcini)
Freescale Layerscape PCIe controller driver:
- Add "big-endian" DT property (Hou Zhiqiang)
- Update SCFG DT property (Hou Zhiqiang)
- Add "aer", "pme", "intr" DT properties (Li Yang)
- Add DT compatible strings for ls1028a (Xiaowei Bao)
Intel VMD host bridge driver:
- Assign VMD IRQ domain before enumeration to avoid IOMMU interrupt
remapping errors when MSI-X remapping is disabled (Nirmal Patel)
- Revert VMD workaround that kept MSI-X remapping enabled when IOMMU
remapping was enabled (Nirmal Patel)
Marvell MVEBU PCIe controller driver:
- Add of_pci_get_slot_power_limit() to parse the
'slot-power-limit-milliwatt' DT property (Pali Rohár)
- Add mvebu support for sending Set_Slot_Power_Limit message (Pali
Rohár)
MediaTek PCIe controller driver:
- Fix refcount leak in mtk_pcie_subsys_powerup() (Miaoqian Lin)
MediaTek PCIe Gen3 controller driver:
- Reset PHY and MAC at probe time (AngeloGioacchino Del Regno)
Microchip PolarFlare PCIe controller driver:
- Add chained_irq_enter()/chained_irq_exit() calls to mc_handle_msi()
and mc_handle_intx() to avoid lost interrupts (Conor Dooley)
- Fix interrupt handling race (Daire McNamara)
NVIDIA Tegra194 PCIe controller driver:
- Drop tegra194 MSI register save/restore, which is unnecessary since
the DWC core does it (Jisheng Zhang)
Qualcomm PCIe controller driver:
- Add SM8150 SoC DT binding and support (Bhupesh Sharma)
- Fix pipe clock imbalance (Johan Hovold)
- Fix runtime PM imbalance on probe errors (Johan Hovold)
- Fix PHY init imbalance on probe errors (Johan Hovold)
- Convert DT binding to YAML (Dmitry Baryshkov)
- Update DT binding to show that resets aren't required for
MSM8996/APQ8096 platforms (Dmitry Baryshkov)
- Add explicit register names per chipset in DT binding (Dmitry
Baryshkov)
- Add sc7280-specific clock and reset definitions to DT binding
(Dmitry Baryshkov)
Rockchip PCIe controller driver:
- Fix bitmap size when searching for free outbound region (Dan
Carpenter)
Rockchip DesignWare PCIe controller driver:
- Remove "snps,dw-pcie" from rockchip-dwc DT "compatible" property
because it's not fully compatible with rockchip (Peter Geis)
- Reset rockchip-dwc controller at probe (Peter Geis)
- Add rockchip-dwc INTx support (Peter Geis)
Synopsys DesignWare PCIe controller driver:
- Return error instead of success if DMA mapping of MSI area fails
(Jiantao Zhang)
Miscellaneous:
- Change pci_set_dma_mask() documentation references to
dma_set_mask() (Alex Williamson)"
* tag 'pci-v5.19-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (64 commits)
dt-bindings: PCI: qcom: Add schema for sc7280 chipset
dt-bindings: PCI: qcom: Specify reg-names explicitly
dt-bindings: PCI: qcom: Do not require resets on msm8996 platforms
dt-bindings: PCI: qcom: Convert to YAML
PCI: qcom: Fix unbalanced PHY init on probe errors
PCI: qcom: Fix runtime PM imbalance on probe errors
PCI: qcom: Fix pipe clock imbalance
PCI: qcom: Add SM8150 SoC support
dt-bindings: pci: qcom: Document PCIe bindings for SM8150 SoC
x86/PCI: Disable E820 reserved region clipping starting in 2023
x86/PCI: Disable E820 reserved region clipping via quirks
x86/PCI: Add kernel cmdline options to use/ignore E820 reserved regions
PCI: microchip: Fix potential race in interrupt handling
PCI/AER: Clear MULTI_ERR_COR/UNCOR_RCV bits
PCI: cadence: Clear FLR in device capabilities register
PCI: cadence: Allow PTM Responder to be enabled
PCI: vmd: Revert 2565e5b69c ("PCI: vmd: Do not disable MSI-X remapping if interrupt remapping is enabled by IOMMU.")
PCI: vmd: Assign VMD IRQ domain before enumeration
PCI: Avoid pci_dev_lock() AB/BA deadlock with sriov_numvfs_store()
PCI: rockchip-dwc: Add legacy interrupt support
...
- Update ACPICA code in the kernel to upstream revision 20220331
including the following changes:
* Add support for the Windows 11 _OSI string (Mario Limonciello)
* Add the CFMWS subtable to the CEDT table (Lawrence Hileman).
* iASL: NHLT: Treat Terminator as specific_config (Piotr Maziarz).
* iASL: NHLT: Fix parsing undocumented bytes at the end of Endpoint
Descriptor (Piotr Maziarz).
* iASL: NHLT: Rename linux specific strucures to device_info (Piotr
Maziarz).
* Add new ACPI 6.4 semantics to Load() and LoadTable() (Bob Moore).
* Clean up double word in comment (Tom Rix).
* Update copyright notices to the year 2022 (Bob Moore).
* Remove some tabs and // comments - automated cleanup (Bob Moore).
* Replace zero-length array with flexible-array member (Gustavo A. R.
Silva).
* Interpreter: Add units to time variable names (Paul Menzel).
* Add support for ARM Performance Monitoring Unit Table (Besar
Wicaksono).
* Inform users about ACPI spec violation related to sleep length (Paul
Menzel).
* iASL/MADT: Add OEM-defined subtable (Bob Moore).
* Interpreter: Fix some typo mistakes (Selvarasu Ganesan).
* Updates for revision E.d of IORT (Shameer Kolothum).
* Use ACPI_FORMAT_UINT64 for 64-bit output (Bob Moore).
- Improve debug messages in the ACPI device PM code (Rafael Wysocki).
- Block ASUS B1400CEAE from suspend to idle by default (Mario
Limonciello).
- Improve handling of PCI devices that are in D3cold during system
initialization (Rafael Wysocki).
- Fix BERT error region memory mapping (Lorenzo Pieralisi).
- Add support for NVIDIA 16550-compatible port subtype to the SPCR
parsing code (Jeff Brasen).
- Use static for BGRT_SHOW kobj_attribute defines (Tom Rix).
- Fix missing prototype warning for acpi_agdi_init() (Ilkka Koskinen).
- Fix missing ERST record ID in the APEI code (Liu Xinpeng).
- Make APEI error injection to refuse to inject into the zero
page (Tony Luck).
- Correct description of INT3407 / INT3532 DPTF attributes in sysfs
(Sumeet Pawnikar).
- Add support for high frequency impedance notification to the DPTF
driver (Sumeet Pawnikar).
- Make mp_config_acpi_gsi() a void function (Li kunyu).
- Unify Package () representation for properties in the ACPI device
properties documentation (Andy Shevchenko).
- Include UUID in _DSM evaluation warning (Michael Niewöhner).
-----BEGIN PGP SIGNATURE-----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=XH6/
-----END PGP SIGNATURE-----
Merge tag 'acpi-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI updates from Rafael Wysocki:
"These update the ACPICA kernel code to upstream revision 20220331,
improve handling of PCI devices that are in D3cold during system
initialization, add support for a few features, fix bugs and clean up
code.
Specifics:
- Update ACPICA code in the kernel to upstream revision 20220331
including the following changes:
- Add support for the Windows 11 _OSI string (Mario Limonciello)
- Add the CFMWS subtable to the CEDT table (Lawrence Hileman).
- iASL: NHLT: Treat Terminator as specific_config (Piotr
Maziarz).
- iASL: NHLT: Fix parsing undocumented bytes at the end of
Endpoint Descriptor (Piotr Maziarz).
- iASL: NHLT: Rename linux specific strucures to device_info
(Piotr Maziarz).
- Add new ACPI 6.4 semantics to Load() and LoadTable() (Bob
Moore).
- Clean up double word in comment (Tom Rix).
- Update copyright notices to the year 2022 (Bob Moore).
- Remove some tabs and // comments - automated cleanup (Bob
Moore).
- Replace zero-length array with flexible-array member (Gustavo
A. R. Silva).
- Interpreter: Add units to time variable names (Paul Menzel).
- Add support for ARM Performance Monitoring Unit Table (Besar
Wicaksono).
- Inform users about ACPI spec violation related to sleep length
(Paul Menzel).
- iASL/MADT: Add OEM-defined subtable (Bob Moore).
- Interpreter: Fix some typo mistakes (Selvarasu Ganesan).
- Updates for revision E.d of IORT (Shameer Kolothum).
- Use ACPI_FORMAT_UINT64 for 64-bit output (Bob Moore).
- Improve debug messages in the ACPI device PM code (Rafael Wysocki).
- Block ASUS B1400CEAE from suspend to idle by default (Mario
Limonciello).
- Improve handling of PCI devices that are in D3cold during system
initialization (Rafael Wysocki).
- Fix BERT error region memory mapping (Lorenzo Pieralisi).
- Add support for NVIDIA 16550-compatible port subtype to the SPCR
parsing code (Jeff Brasen).
- Use static for BGRT_SHOW kobj_attribute defines (Tom Rix).
- Fix missing prototype warning for acpi_agdi_init() (Ilkka
Koskinen).
- Fix missing ERST record ID in the APEI code (Liu Xinpeng).
- Make APEI error injection to refuse to inject into the zero page
(Tony Luck).
- Correct description of INT3407 / INT3532 DPTF attributes in sysfs
(Sumeet Pawnikar).
- Add support for high frequency impedance notification to the DPTF
driver (Sumeet Pawnikar).
- Make mp_config_acpi_gsi() a void function (Li kunyu).
- Unify Package () representation for properties in the ACPI device
properties documentation (Andy Shevchenko).
- Include UUID in _DSM evaluation warning (Michael Niewöhner)"
* tag 'acpi-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (41 commits)
Revert "ACPICA: executer/exsystem: Warn about sleeps greater than 10 ms"
ACPI: utils: include UUID in _DSM evaluation warning
ACPI: PM: Block ASUS B1400CEAE from suspend to idle by default
x86: ACPI: Make mp_config_acpi_gsi() a void function
ACPI: DPTF: Add support for high frequency impedance notification
ACPI: AGDI: Fix missing prototype warning for acpi_agdi_init()
ACPI: bus: Avoid non-ACPI device objects in walks over children
ACPI: DPTF: Correct description of INT3407 / INT3532 attributes
ACPI: BGRT: use static for BGRT_SHOW kobj_attribute defines
ACPI, APEI, EINJ: Refuse to inject into the zero page
ACPI: PM: Always print final debug message in acpi_device_set_power()
ACPI: SPCR: Add support for NVIDIA 16550-compatible port subtype
ACPI: docs: enumeration: Unify Package () for properties (part 2)
ACPI: APEI: Fix missing ERST record id
ACPICA: Update version to 20220331
ACPICA: exsystem.c: Use ACPI_FORMAT_UINT64 for 64-bit output
ACPICA: IORT: Updates for revision E.d
ACPICA: executer/exsystem: Fix some typo mistakes
ACPICA: iASL/MADT: Add OEM-defined subtable
ACPICA: executer/exsystem: Warn about sleeps greater than 10 ms
...
- Assign VMD IRQ domain before enumeration to avoid IOMMU interrupt
remapping errors when MSI-X remapping is disabled (Nirmal Patel)
- Revert VMD workaround that kept MSI-X remapping enabled when IOMMU
remapping was enabled (Nirmal Patel)
* remotes/lorenzo/pci/vmd:
PCI: vmd: Revert 2565e5b69c ("PCI: vmd: Do not disable MSI-X remapping if interrupt remapping is enabled by IOMMU.")
PCI: vmd: Assign VMD IRQ domain before enumeration
- Drop unnecessary "retval" variable, since it's never read (Colin Ian
King)
* remotes/lorenzo/pci/versatile:
PCI: versatile: Remove redundant variable retval
- Fix refcount leak in mtk_pcie_subsys_powerup() (Miaoqian Lin)
- Reset PHY and MAC at probe time (AngeloGioacchino Del Regno)
* remotes/lorenzo/pci/mediatek:
PCI: mediatek-gen3: Assert resets to ensure expected init state
PCI: mediatek: Fix refcount leak in mtk_pcie_subsys_powerup()
- Return error instead of success if DMA mapping of MSI area fails (Jiantao
Zhang)
- Drop tegra194 MSI register save/restore, which is unnecessary since the
DWC core does it (Jisheng Zhang)
- Factor out qcom enable/disable resources code (Dmitry Baryshkov)
- Remove "snps,dw-pcie" from rockchip-dwc DT "compatible" property because
it's not fully compatible with rockchip (Peter Geis)
- Reset rockchip-dwc controller at probe (Peter Geis)
- Add rockchip-dwc INTx support (Peter Geis)
* remotes/lorenzo/pci/dwc:
PCI: rockchip-dwc: Add legacy interrupt support
PCI: rockchip-dwc: Reset core at driver probe
dt-bindings: PCI: Remove fallback from Rockchip DesignWare binding
PCI: qcom-ep: Move enable/disable resources code to common functions
PCI: tegra194: Remove unnecessary MSI enable reg save and restore
PCI: dwc: Fix setting error return on MSI DMA mapping failure
- Fix bitmap size when searching for free outbound region (Dan Carpenter)
- Do device-specific setup to allow PTM Responder to be enabled (Christian
Gmeiner)
- Don't advertise FLR in Device Capabilities register because the
controller incorrectly resets Margining Lane Status and Margining Lane
Control on FLR (Parshuram Thombare)
* remotes/lorenzo/pci/cadence:
PCI: cadence: Clear FLR in device capabilities register
PCI: cadence: Allow PTM Responder to be enabled
PCI: cadence: Fix find_first_zero_bit() limit
- Define pci_restore_standard_config() only for CONFIG_PM_SLEEP, since it's
not used otherwise (Krzysztof Kozlowski)
- Power up all devices during runtime resume (Rafael J. Wysocki)
- Resume subordinate bus in bus type callbacks (Rafael J. Wysocki)
- Drop pci_dev runtime_d3cold flag since no uses remain (Rafael J. Wysocki)
- Move power-up to D0 code to pci_power_up() and rename
pci_raw_set_power_state() to pci_set_low_power_state() (Rafael J.
Wysocki)
- Set current_state to D3cold if the device is not accessible (Rafael J.
Wysocki)
- Do not call pci_update_current_state() from pci_power_up() (Rafael J.
Wysocki)
- Write 0 to PMCSR in pci_power_up() in all cases (Rafael J. Wysocki)
- Split part of pci_power_up() off to pci_set_full_power_state() (Rafael J.
Wysocki)
- Do not restore BARs if device is not in D0 (Rafael J. Wysocki)
* pci/pm:
PCI/PM: Replace pci_set_power_state() in pci_pm_thaw_noirq()
PCI/PM: Rearrange pci_set_power_state()
PCI/PM: Clean up pci_set_low_power_state()
PCI/PM: Do not restore BARs if device is not in D0
PCI/PM: Split pci_power_up()
PCI/PM: Write 0 to PMCSR in pci_power_up() in all cases
PCI/PM: Do not call pci_update_current_state() from pci_power_up()
PCI/PM: Unfold pci_platform_power_transition() in pci_power_up()
PCI/PM: Set current_state to D3cold if the device is not accessible
PCI/PM: Relocate pci_set_low_power_state()
PCI/PM: Split pci_raw_set_power_state()
PCI/PM: Rearrange pci_update_current_state()
PCI/PM: Drop the runtime_d3cold device flag
PCI/PM: Resume subordinate bus in bus type callbacks
PCI/PM: Power up all devices during runtime resume
PCI/PM: Define pci_restore_standard_config() only for CONFIG_PM_SLEEP
- Update pci_p2pdma_whitelist[] checking so we accept Skylake-E Root Ports
even if they're not at devfn 00.0 (Shlomo Pongratz)
* pci/p2pdma:
PCI/P2PDMA: Whitelist Intel Skylake-E Root Ports at any devfn
- Allow D3 only if Root Port can signal and wake from D3 so we don't miss
hotplug events on AMD Yellow Carp (Mario Limonciello)
- Clean up hotplug include files to enable future powerpc cleanup
(Christophe Leroy)
* pci/hotplug:
PCI: hotplug: Clean up include files
PCI/ACPI: Allow D3 only if Root Port can signal and wake from D3
- Clear AER "multiple errors" bits to avoid race that left them set forever
(Kuppuswamy Sathyanarayanan)
* pci/error:
PCI/AER: Clear MULTI_ERR_COR/UNCOR_RCV bits
Drop the leftover pm_runtime_disable() calls from the late probe error
paths that would, for example, prevent runtime PM from being reenabled
after a probe deferral.
Link: https://lore.kernel.org/r/20220401133854.10421-2-johan+linaro@kernel.org
Fixes: 6e5da6f7d8 ("PCI: qcom: Fix error handling in runtime PM support")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com>
Cc: stable@vger.kernel.org # 4.20
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Fix a clock imbalance introduced by ed8cc3b1fc ("PCI: qcom: Add support
for SDM845 PCIe controller"), which enables the pipe clock both in init()
and in post_init() but only disables in post_deinit().
Note that the pipe clock was also never disabled in the init() error
paths and that enabling the clock before powering up the PHY looks
questionable.
Link: https://lore.kernel.org/r/20220401133351.10113-1-johan+linaro@kernel.org
Fixes: ed8cc3b1fc ("PCI: qcom: Add support for SDM845 PCIe controller")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: stable@vger.kernel.org # 5.6
The PCIe IP (rev 1.5.0) on SM8150 SoC is similar to the one used on
SM8250. Add SM8150 support, reusing the members of ops_1_9_0.
Link: https://lore.kernel.org/r/20220326060810.1797516-3-bhupesh.sharma@linaro.org
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Cc: Vinod Koul <vkoul@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRTLbB6QfY48x44uB6AXGG7T9hjvgUCYosaQAAKCRCAXGG7T9hj
vil9AP9b4C+f9LTG0kAinjxLPyWE0Mo/iq3gO60MteZ2HyeI+AD/eSzJioJA0vyH
4pnU/UaGLJSp/B1LitLdjwoWIvwcEws=
=pDcW
-----END PGP SIGNATURE-----
Merge tag 'for-linus-5.19-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen updates from Juergen Gross:
- decouple the PV interface from kernel internals in the Xen
scsifront/scsiback pv drivers
- harden the Xen scsifront PV driver against a malicious backend driver
- simplify Xen PV frontend driver ring page setup
- support Xen setups with multiple domains created at boot time to
tolerate Xenstore coming up late
- two small cleanup patches
* tag 'for-linus-5.19-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: (29 commits)
xen: add support for initializing xenstore later as HVM domain
xen: sync xs_wire.h header with upstream xen
x86: xen: remove STACK_FRAME_NON_STANDARD from xen_cpuid
xen-blk{back,front}: Update contact points for buffer_squeeze_duration_ms and feature_persistent
xen/xenbus: eliminate xenbus_grant_ring()
xen/sndfront: use xenbus_setup_ring() and xenbus_teardown_ring()
xen/usbfront: use xenbus_setup_ring() and xenbus_teardown_ring()
xen/scsifront: use xenbus_setup_ring() and xenbus_teardown_ring()
xen/pcifront: use xenbus_setup_ring() and xenbus_teardown_ring()
xen/drmfront: use xenbus_setup_ring() and xenbus_teardown_ring()
xen/tpmfront: use xenbus_setup_ring() and xenbus_teardown_ring()
xen/netfront: use xenbus_setup_ring() and xenbus_teardown_ring()
xen/blkfront: use xenbus_setup_ring() and xenbus_teardown_ring()
xen/xenbus: add xenbus_setup_ring() service function
xen: update ring.h
xen/shbuf: switch xen-front-pgdir-shbuf to use INVALID_GRANT_REF
xen/dmabuf: switch gntdev-dmabuf to use INVALID_GRANT_REF
xen/sound: switch xen_snd_front to use INVALID_GRANT_REF
xen/drm: switch xen_drm_front to use INVALID_GRANT_REF
xen/usb: switch xen-hcd to use INVALID_GRANT_REF
...
Clear the MSI bit in ISTATUS_LOCAL register after reading it, but
before reading and handling individual MSI bits from the ISTATUS_MSI
register. This avoids a potential race where new MSI bits may be set
on the ISTATUS_MSI register after it was read and be missed when the
MSI bit in the ISTATUS_LOCAL register is cleared.
ISTATUS_LOCAL is a read/write/clear register; the register's bits
are set when the corresponding interrupt source is activated. Each
source is independent and thus multiple sources may be active
simultaneously. The processor can monitor and clear status
bits. If one or more ISTATUS_LOCAL interrupt sources are active,
the RootPort issues an interrupt towards the processor (on
the AXI domain). Bit 28 of this register reports an MSI has been
received by the RootPort.
ISTATUS_MSI is a read/write/clear register. Bits 31-0 are asserted
when an MSI with message number 31-0 is received by the RootPort.
The processor must monitor and clear these bits.
Effectively, Bit 28 of ISTATUS_LOCAL informs the processor that
an MSI has arrived at the RootPort and ISTATUS_MSI informs the
processor which MSI (in the range 0 - 31) needs handling.
Reported by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/linux-pci/20220127202000.GA126335@bhelgaas/
Link: https://lore.kernel.org/r/20220517141622.145581-1-daire.mcnamara@microchip.com
Fixes: 6f15a9c9f9 ("PCI: microchip: Add Microchip PolarFire PCIe controller driver")
Signed-off-by: Daire McNamara <daire.mcnamara@microchip.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
-----BEGIN PGP SIGNATURE-----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=5giZ
-----END PGP SIGNATURE-----
Merge tag 'pci-v5.18-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI fixes from Bjorn Helgaas:
- Avoid putting Elo i2 PCIe Ports in D3cold because downstream devices
are inaccessible after going back to D0 (Rafael J. Wysocki)
- Qualcomm SM8250 has a ddrss_sf_tbu clock but SC8180X does not; make a
SC8180X-specific config without the clock so it probes correctly
(Bjorn Andersson)
- Revert aardvark chained IRQ handler rewrite because it broke
interrupt affinity (Pali Rohár)
* tag 'pci-v5.18-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
Revert "PCI: aardvark: Rewrite IRQ code to chained IRQ handler"
PCI: qcom: Remove ddrss_sf_tbu clock from SC8180X
PCI/PM: Avoid putting Elo i2 PCIe Ports in D3cold
When a Root Port or Root Complex Event Collector receives an error Message
e.g., ERR_COR, it sets PCI_ERR_ROOT_COR_RCV in the Root Error Status
register and logs the Requester ID in the Error Source Identification
register. If it receives a second ERR_COR Message before software clears
PCI_ERR_ROOT_COR_RCV, hardware sets PCI_ERR_ROOT_MULTI_COR_RCV and the
Requester ID is lost.
In the following scenario, PCI_ERR_ROOT_MULTI_COR_RCV was never cleared:
- hardware receives ERR_COR message
- hardware sets PCI_ERR_ROOT_COR_RCV
- aer_irq() entered
- aer_irq(): status = pci_read_config_dword(PCI_ERR_ROOT_STATUS)
- aer_irq(): now status == PCI_ERR_ROOT_COR_RCV
- hardware receives second ERR_COR message
- hardware sets PCI_ERR_ROOT_MULTI_COR_RCV
- aer_irq(): pci_write_config_dword(PCI_ERR_ROOT_STATUS, status)
- PCI_ERR_ROOT_COR_RCV is cleared; PCI_ERR_ROOT_MULTI_COR_RCV is set
- aer_irq() entered again
- aer_irq(): status = pci_read_config_dword(PCI_ERR_ROOT_STATUS)
- aer_irq(): now status == PCI_ERR_ROOT_MULTI_COR_RCV
- aer_irq() exits because PCI_ERR_ROOT_COR_RCV not set
- PCI_ERR_ROOT_MULTI_COR_RCV is still set
The same problem occurred with ERR_NONFATAL/ERR_FATAL Messages and
PCI_ERR_ROOT_UNCOR_RCV and PCI_ERR_ROOT_MULTI_UNCOR_RCV.
Fix the problem by queueing an AER event and clearing the Root Error Status
bits when any of these bits are set:
PCI_ERR_ROOT_COR_RCV
PCI_ERR_ROOT_UNCOR_RCV
PCI_ERR_ROOT_MULTI_COR_RCV
PCI_ERR_ROOT_MULTI_UNCOR_RCV
See the bugzilla link for details from Eric about how to reproduce this
problem.
[bhelgaas: commit log, move repro details to bugzilla]
Fixes: e167bfcaa4 ("PCI: aerdrv: remove magical ROOT_ERR_STATUS_MASKS")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215992
Link: https://lore.kernel.org/r/20220418150237.1021519-1-sathyanarayanan.kuppuswamy@linux.intel.com
Reported-by: Eric Badger <ebadger@purestorage.com>
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Ashok Raj <ashok.raj@intel.com>
This reverts commit 1571d67dc1.
This commit broke support for setting interrupt affinity. It looks like
that it is related to the chained IRQ handler. Revert this commit until
issue with setting interrupt affinity is fixed.
Fixes: 1571d67dc1 ("PCI: aardvark: Rewrite IRQ code to chained IRQ handler")
Link: https://lore.kernel.org/r/20220515125815.30157-1-pali@kernel.org
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
[ Similarly to commit a765ed47e4 ("PCI: hv: Fix synchronization
between channel callback and hv_compose_msi_msg()"): ]
The (on-stack) teardown packet becomes invalid once the completion
timeout in hv_pci_bus_exit() has expired and hv_pci_bus_exit() has
returned. Prevent the channel callback from accessing the invalid
packet by removing the ID associated to such packet from the VMbus
requestor in hv_pci_bus_exit().
Signed-off-by: Andrea Parri (Microsoft) <parri.andrea@gmail.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Link: https://lore.kernel.org/r/20220511223207.3386-3-parri.andrea@gmail.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
For additional robustness in the face of Hyper-V errors or malicious
behavior, validate all values that originate from packets that Hyper-V
has sent to the guest in the host-to-guest ring buffer. Ensure that
invalid values cannot cause data being copied out of the bounds of the
source buffer in hv_pci_onchannelcallback().
While at it, remove a redundant validation in hv_pci_generic_compl():
hv_pci_onchannelcallback() already ensures that all processed incoming
packets are "at least as large as [in fact larger than] a response".
Signed-off-by: Andrea Parri (Microsoft) <parri.andrea@gmail.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Link: https://lore.kernel.org/r/20220511223207.3386-2-parri.andrea@gmail.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Originally, creating the dma_ranges resource list in pre-sorted fashion
was the simplest and most efficient way to enforce the order required by
iova_reserve_pci_windows(). However since then at least one PCI host
driver is now re-sorting the list for its own probe-time processing,
which doesn't seem entirely unreasonable, so that basic assumption no
longer holds. Make iommu-dma robust and get the sort order it needs by
explicitly sorting, which means we can also save the effort at creation
time and just build the list in whatever natural order the DT had.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/35661036a7e4160850895f9b37f35408b6a29f2f.1652091160.git.robin.murphy@arm.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Clear FLR (Function Level Reset) from device capabilities
registers for all physical functions.
During FLR, the Margining Lane Status and Margining Lane Control
registers should not be reset, as per PCIe specification.
However, the controller incorrectly resets these registers upon FLR.
This causes PCISIG compliance FLR test to fail. Hence preventing
all functions from advertising FLR support if flag quirk_disable_flr
is set.
Link: https://lore.kernel.org/r/1635165075-89864-1-git-send-email-pthombar@cadence.com
Signed-off-by: Parshuram Thombare <pthombar@cadence.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
This enables the Controller [RP] to automatically respond with
Response/ResponseD messages if CDNS_PCIE_LM_TPM_CTRL_PTMRSEN
and PCI_PTM_CTRL_ENABLE bits are both set.
Link: https://lore.kernel.org/r/20220512055539.1782437-1-christian.gmeiner@gmail.com
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Revert 2565e5b69c ("PCI: vmd: Do not disable MSI-X remapping if
interrupt remapping is enabled by IOMMU.")
The commit 2565e5b69c was added as a workaround to keep MSI-X
remapping enabled if IOMMU enables interrupt remapping. VMD would keep
running in low performance mode. There is no dependency between MSI-X
remapping by VMD and interrupt remapping by IOMMU.
Link: https://lore.kernel.org/r/20220511095707.25403-3-nirmal.patel@linux.intel.com
Signed-off-by: Nirmal Patel <nirmal.patel@linux.intel.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
During the boot process all the PCI devices are assigned default PCI-MSI
IRQ domain including VMD endpoint devices. If interrupt-remapping is
enabled by IOMMU, the PCI devices except VMD get new INTEL-IR-MSI IRQ
domain. And VMD is supposed to create and assign a separate VMD-MSI IRQ
domain for its child devices in order to support MSI-X remapping
capabilities.
Now when MSI-X remapping in VMD is disabled in order to improve
performance, VMD skips VMD-MSI IRQ domain assignment process to its
child devices. Thus the devices behind VMD get default PCI-MSI IRQ
domain instead of INTEL-IR-MSI IRQ domain when VMD creates root bus and
configures child devices.
As a result host OS fails to boot and DMAR errors were observed when
interrupt remapping was enabled on Intel Icelake CPUs. For instance:
DMAR: DRHD: handling fault status reg 2
DMAR: [INTR-REMAP] Request device [0xe2:0x00.0] fault index 0xa00 [fault reason 0x25] Blocked a compatibility format interrupt request
To fix this issue, dev_msi_info struct in dev struct maintains correct
value of IRQ domain. VMD will use this information to assign proper IRQ
domain to its child devices when it doesn't create a separate IRQ domain.
Link: https://lore.kernel.org/r/20220511095707.25403-2-nirmal.patel@linux.intel.com
Signed-off-by: Nirmal Patel <nirmal.patel@linux.intel.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
The sysfs sriov_numvfs_store() path acquires the device lock before the
config space access lock:
sriov_numvfs_store
device_lock # A (1) acquire device lock
sriov_configure
vfio_pci_sriov_configure # (for example)
vfio_pci_core_sriov_configure
pci_disable_sriov
sriov_disable
pci_cfg_access_lock
pci_wait_cfg # B (4) wait for dev->block_cfg_access == 0
Previously, pci_dev_lock() acquired the config space access lock before the
device lock:
pci_dev_lock
pci_cfg_access_lock
dev->block_cfg_access = 1 # B (2) set dev->block_cfg_access = 1
device_lock # A (3) wait for device lock
Any path that uses pci_dev_lock(), e.g., pci_reset_function(), may
deadlock with sriov_numvfs_store() if the operations occur in the sequence
(1) (2) (3) (4).
Avoid the deadlock by reversing the order in pci_dev_lock() so it acquires
the device lock before the config space access lock, the same as the
sriov_numvfs_store() path.
[bhelgaas: combined and adapted commit log from Jay Zhou's independent
subsequent posting:
https://lore.kernel.org/r/20220404062539.1710-1-jianjay.zhou@huawei.com]
Link: https://lore.kernel.org/linux-pci/1583489997-17156-1-git-send-email-yangyicong@hisilicon.com/
Also-posted-by: Jay Zhou <jianjay.zhou@huawei.com>
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
According to Dexuan, the hypervisor folks beleive that multi-msi
allocations are not correct. compose_msi_msg() will allocate multi-msi
one by one. However, multi-msi is a block of related MSIs, with alignment
requirements. In order for the hypervisor to allocate properly aligned
and consecutive entries in the IOMMU Interrupt Remapping Table, there
should be a single mapping request that requests all of the multi-msi
vectors in one shot.
Dexuan suggests detecting the multi-msi case and composing a single
request related to the first MSI. Then for the other MSIs in the same
block, use the cached information. This appears to be viable, so do it.
Suggested-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Tested-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/1652282599-21643-1-git-send-email-quic_jhugo@quicinc.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Currently if compose_msi_msg() is called multiple times, it will free any
previous IRTE allocation, and generate a new allocation. While nothing
prevents this from occurring, it is extraneous when Linux could just reuse
the existing allocation and avoid a bunch of overhead.
However, when future IRTE allocations operate on blocks of MSIs instead of
a single line, freeing the allocation will impact all of the lines. This
could cause an issue where an allocation of N MSIs occurs, then some of
the lines are retargeted, and finally the allocation is freed/reallocated.
The freeing of the allocation removes all of the configuration for the
entire block, which requires all the lines to be retargeted, which might
not happen since some lines might already be unmasked/active.
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Tested-by: Dexuan Cui <decui@microsoft.com>
Tested-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/1652282582-21595-1-git-send-email-quic_jhugo@quicinc.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
The legacy interrupts on the rk356x PCIe controller are handled by a
single muxed interrupt. Add IRQ domain support to the pcie-dw-rockchip
driver to support the virtual domain.
Link: https://lore.kernel.org/r/20220429123832.2376381-4-pgwipeout@gmail.com
Signed-off-by: Peter Geis <pgwipeout@gmail.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
The PCIe controller is in an unknown state at driver probe. This can
lead to undesireable effects when the driver attempts to configure the
controller.
Prevent issues in the future by resetting the core during probe.
Link: https://lore.kernel.org/r/20220429123832.2376381-3-pgwipeout@gmail.com
Tested-by: Nicolas Frattaroli <frattaroli.nicolas@gmail.com>
Signed-off-by: Peter Geis <pgwipeout@gmail.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
The controller may have been left out of reset by the bootloader,
in which case, before the powerup sequence, the controller will be
found preconfigured with values that were set before booting the
kernel: this produces a controller failure, with the result of
a failure during the mtk_pcie_startup_port() sequence as the PCIe
link never gets up.
To ensure that we get a clean start in an expected state, assert
both the PHY and MAC resets before executing the controller
power-up sequence.
Link: https://lore.kernel.org/r/20220404144858.92390-1-angelogioacchino.delregno@collabora.com
Fixes: d3bf75b579 ("PCI: mediatek-gen3: Add MediaTek Gen3 driver for MT8192")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
According to the PCIe standard the PERST# signal (reset-gpio in
fsl,imx* compatible dts) should be kept asserted for at least 100 usec
before the PCIe refclock is stable, should be kept asserted for at
least 100 msec after the power rails are stable and the host should wait
at least 100 msec after it is de-asserted before accessing the
configuration space of any attached device.
From PCIe CEM r2.0, sec 2.6.2
T-PVPERL: Power stable to PERST# inactive - 100 msec
T-PERST-CLK: REFCLK stable before PERST# inactive - 100 usec.
From PCIe r5.0, sec 6.6.1
With a Downstream Port that does not support Link speeds greater than
5.0 GT/s, software must wait a minimum of 100 ms before sending a
Configuration Request to the device immediately below that Port.
Failure to do so could prevent PCIe devices to be working correctly,
and this was experienced with real devices.
Move reset assert to imx6_pcie_assert_core_reset(), this way we ensure
that PERST# is asserted before enabling any clock, move de-assert to the
end of imx6_pcie_deassert_core_reset() after the clock is enabled and
deemed stable and add a new delay of 100 msec just afterward.
Link: https://lore.kernel.org/all/20220211152550.286821-1-francesco.dolcini@toradex.com
Link: https://lore.kernel.org/r/20220404081509.94356-1-francesco.dolcini@toradex.com
Fixes: bb38919ec5 ("PCI: imx6: Add support for i.MX6 PCIe controller")
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Acked-by: Richard Zhu <hongxing.zhu@nxp.com>
Remove code duplication by moving the code related to enabling/disabling
the resources (PHY, CLK, Reset) to common functions so that they can be
called from multiple places.
[mani: renamed the functions and reworded the commit message]
Link: https://lore.kernel.org/r/20220502104938.97033-1-manivannan.sadhasivam@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Calling pci_set_power_state() to put the given device into D0 in
pci_pm_thaw_noirq() may cause it to restore the device's BARs, which is
redundant before calling pci_restore_state(), so replace it with a direct
pci_power_up() call followed by pci_update_current_state() if it returns a
nonzero value, in analogy with pci_pm_default_resume_early().
Avoid code duplication by introducing a wrapper function to contain the
repeating pattern and calling it in both places.
Link: https://lore.kernel.org/r/3639079.MHq7AAxBmi@kreacher
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
The part of pci_set_power_state() related to transitions into
low-power states is unnecessary convoluted, so clearly divide it
into the D3cold special case and the general case covering all of
the other states.
Also fix a potential issue with calling pci_bus_set_current_state()
to set the current state of all devices on the subordinate bus to
D3cold without checking if the power state of the parent bridge has
really changed to D3cold.
Link: https://lore.kernel.org/r/2139440.Mh6RI2rZIc@kreacher
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Make the following assorted non-essential changes in
pci_set_low_power_state():
1. Drop two redundant checks from it (the caller takes care of these
conditions).
2. Change the log level of a messages printed by it to "debug",
because it only indicates a programming mistake.
Link: https://lore.kernel.org/r/2539071.Lt9SDvczpP@kreacher
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Do not attempt to restore the device's BARs in
pci_set_full_power_state() if the actual current
power state of the device is not D0.
Link: https://lore.kernel.org/r/1849718.CQOukoFCf9@kreacher
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
One of the two callers of pci_power_up() invokes
pci_update_current_state() and pci_restore_state() right after calling
it, in which case running the part of it happening after the mandatory
transition delays is redundant, so move that part out of it into a new
function called pci_set_full_power_state() that will be invoked from
pci_set_power_state() which is the other caller of pci_power_up().
Link: https://lore.kernel.org/r/1942150.usQuhbGJ8B@kreacher
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Make pci_power_up() write 0 to the device's PCI_PM_CTRL register in
order to put it into D0 regardless of the power state returned by
the previous read from that register which should not matter.
Link: https://lore.kernel.org/r/5748066.MhkbZ0Pkbq@kreacher
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Notice that calling pci_update_current_state() from pci_power_up() is
redundant and may be harmful in some cases.
First, if the device is in a low-power state before pci_power_up()
gets called for it and platform_pci_set_power_state() successfully
changes its power state to D0, pci_update_current_state() will update
current_state to reflect that and pci_power_up() will return success
right away without restoring the device's BARs or reconfiguring ASPM
which may be necessary. This is arguably incorrect and definitely
inconsistent with the case when platform_pci_set_power_state() returns
an error (for example, because the device is not power-manageable by
the platform firmware).
Second, current_state should not be overwritten until the decision
whether or not to restore the device's BARs is made, because that
decision generally depends on its value. Again, calling
pci_update_current_state() in pci_power_up() is not consistent with
this observation.
Next, pci_power_up() attempts to read from the device's PCI_PM_CTRL
register regardless of the current_state value unless it is PCI_D0,
including the case when pci_update_current_state() sets current_state
to PCI_D3cold to indicate that the device is not accessible. If the
register read is not successful, current_state will be set to
PCI_D3cold anyway, so that pci_update_current_state() action is
redundant.
Further, if pci_update_current_state() reads the device's PCI_PM_CTRL
register, pci_power_up() will repeat that read going forward and
it is not necessary to update current_state in the meantime.
Finally, if pm_cap is not set (in which case the PCI_PM_CTRL register
is not present), the power state of the device should be determined
with the help of the platform firmware or set to D0 if that's not
possible and pci_update_current_state() does not do that.
Accordingly, rearrange pci_power_up() so as to address the above
shortcomings.
Link: https://lore.kernel.org/r/3695055.kQq0lBPeGt@kreacher
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Some actions carried out by pci_platform_power_transition(() in
pci_power_up() are redundant, but before dealing with them, make
pci_power_up() call the pci_platform_power_transition() code directly
(and avoid a redundant check when pm_cap is unset while at it).
Link: https://lore.kernel.org/r/1922486.PYKUYFuaPT@kreacher
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Make pci_power_up() and pci_set_low_power_state() change current_state
to PCI_D3cold when the device is not accessible along the lines of
pci_update_current_state().
Link: https://lore.kernel.org/r/10104376.nUPlyArG6x@kreacher
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Because pci_set_power_state() is the only caller of
pci_set_low_power_state(), put the latter next to the former.
No functional impact.
Link: https://lore.kernel.org/r/3202976.44csPzL39Z@kreacher
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
The transitions from low-power states to D0 and the other way around
are unnecessarily tangled in pci_raw_set_power_state() which makes it
rather hard to follow.
Moreover, the only caller of pci_raw_set_power_state() passing PCI_D0
as its state argument is pci_power_up(), so the code carrying out
transitions into D0 can be put directly into that function.
Accordingly, move the code handling transitions from low-power states
into D0 directly into pci_power_up() and rename the remaining part
of pci_raw_set_power_state() to pci_set_low_power_state(), because
it only handles transitions into low-power state now.
While at it, fix up some white space, update some comments and modify
messages printed by pci_power_up() and pci_set_low_power_state() to
be less confusing (which is the only expected functional impact of
this change).
Link: https://lore.kernel.org/r/13038676.uLZWGnKmhe@kreacher
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Save one config space access in pci_update_current_state() by testing the
retrieved PCI_PM_CTRL register value against PCI_POSSIBLE_ERROR() instead
of invoking pci_device_is_present() separately.
While at it, drop a pair of unnecessary parens.
No expected functional impact.
Link: https://lore.kernel.org/r/1917095.PYKUYFuaPT@kreacher
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
The runtime_d3cold flag is not needed any more, so drop it.
Link: https://lore.kernel.org/r/8077784.T7Z3S40VBb@kreacher
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Calling pci_resume_bus() on the secondary bus from pci_power_up() as it is
done now is questionable, because it depends on the mandatory bridge
power-up delays that are only covered by the PCI bus type PM callbacks.
For this reason, move the subordinate bus resume to those callbacks too and
use the observation that if a bridge is being powered-up during resume from
system-wide suspend, it may be still desirable to runtime-resume its
subordinate bus after completing the system-wide transition (in case the
resume of the devices on that bus is skipped during it).
Link: https://lore.kernel.org/r/3190097.aeNJFYEL58@kreacher
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Currently, endpoint devices may not be powered up entirely during runtime
resume that follows a D3hot -> D0 transition of the parent bridge.
Namely, even if the power state of an endpoint device, as indicated by its
PCI_PM_CTRL register, is D0 after powering up its parent bridge, it may be
still necessary to bring its ACPI companion into D0 and that should be done
before accessing it. However, the current code assumes that reading the
PCI_PM_CTRL register is sufficient to establish the endpoint device's power
state, which may lead to problems.
Address that by forcing a power-up of all PCI devices, including the
platform firmware part of it, during runtime resume.
Link: https://lore.kernel.org/linux-pm/11967527.O9o76ZdvQC@kreacher
Fixes: 5775b843a6 ("PCI: Restore config space on runtime resume despite being unbound")
Link: https://lore.kernel.org/r/2652115.mvXUDI8C0e@kreacher
Reported-by: Abhishek Sahu <abhsahu@nvidia.com>
Tested-by: Abhishek Sahu <abhsahu@nvidia.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
pci_restore_standard_config() was defined under CONFIG_PM but called only
by pci_pm_resume() (defined under CONFIG_SUSPEND) and pci_pm_restore()
(defined under CONFIG_HIBERNATE_CALLBACKS). A configuration with only
CONFIG_PM leads to a warning:
drivers/pci/pci-driver.c:533:12: error: ‘pci_restore_standard_config’ defined but not used [-Werror=unused-function]
CONFIG_PM_SLEEP depends on CONFIG_SUSPEND and CONFIG_HIBERNATE_CALLBACKS,
so define pci_restore_standard_config() under that instead.
Link: https://lore.kernel.org/r/20220420141135.444820-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
The Qualcomm SC8180X platform was piggy-backing on the SM8250
qcom_pcie_cfg, but SC8180X doesn't have the ddrss_sf_tbu clock, so
it now fails to probe due to the missing clock.
Give SC8180X its own qcom_pcie_cfg, without the ddrss_sf_tbu flag set.
Fixes: 0614f98bbb ("PCI: qcom: Add ddrss_sf_tbu flag")
Link: https://lore.kernel.org/r/20220331013415.592748-1-bjorn.andersson@linaro.org
Tested-by: Steev Klimaszewski <steev@kali.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com>
Currently when the pci-hyperv driver finishes probing and initializing the
PCI device, it sets the PCI_COMMAND_MEMORY bit; later when the PCI device
is registered to the core PCI subsystem, the core PCI driver's BAR detection
and initialization code toggles the bit multiple times, and each toggling of
the bit causes the hypervisor to unmap/map the virtual BARs from/to the
physical BARs, which can be slow if the BAR sizes are huge, e.g., a Linux VM
with 14 GPU devices has to spend more than 3 minutes on BAR detection and
initialization, causing a long boot time.
Reduce the boot time by not setting the PCI_COMMAND_MEMORY bit when we
register the PCI device (there is no need to have it set in the first place).
The bit stays off till the PCI device driver calls pci_enable_device().
With this change, the boot time of such a 14-GPU VM is reduced by almost
3 minutes.
Link: https://lore.kernel.org/lkml/20220419220007.26550-1-decui@microsoft.com/
Tested-by: Boqun Feng (Microsoft) <boqun.feng@gmail.com>
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Jake Oshins <jakeo@microsoft.com>
Link: https://lore.kernel.org/r/20220502074255.16901-1-decui@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
In the multi-MSI case, hv_arch_irq_unmask() will only operate on the first
MSI of the N allocated. This is because only the first msi_desc is cached
and it is shared by all the MSIs of the multi-MSI block. This means that
hv_arch_irq_unmask() gets the correct address, but the wrong data (always
0).
This can break MSIs.
Lets assume MSI0 is vector 34 on CPU0, and MSI1 is vector 33 on CPU0.
hv_arch_irq_unmask() is called on MSI0. It uses a hypercall to configure
the MSI address and data (0) to vector 34 of CPU0. This is correct. Then
hv_arch_irq_unmask is called on MSI1. It uses another hypercall to
configure the MSI address and data (0) to vector 33 of CPU0. This is
wrong, and results in both MSI0 and MSI1 being routed to vector 33. Linux
will observe extra instances of MSI1 and no instances of MSI0 despite the
endpoint device behaving correctly.
For the multi-MSI case, we need unique address and data info for each MSI,
but the cached msi_desc does not provide that. However, that information
can be gotten from the int_desc cached in the chip_data by
compose_msi_msg(). Fix the multi-MSI case to use that cached information
instead. Since hv_set_msi_entry_from_desc() is no longer applicable,
remove it.
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/1651068453-29588-1-git-send-email-quic_jhugo@quicinc.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
If a switch lacks ACS P2P Request Redirect, a device below the switch can
bypass the IOMMU and DMA directly to other devices below the switch, so
all the downstream devices must be in the same IOMMU group as the switch
itself.
The existing VFIO framework allows the portdrv driver to be bound to the
bridge while its downstream devices are assigned to user space. The
pci_dma_configure() marks the IOMMU group as containing only devices
with kernel drivers that manage DMA. Avoid this default behavior for the
portdrv driver in order for compatibility with the current VFIO usage.
We achieve this by setting ".driver_managed_dma = true" in pci_driver
structure. It is safe because the portdrv driver meets below criteria:
- This driver doesn't use DMA, as you can't find any related calls like
pci_set_master() or any kernel DMA API (dma_map_*() and etc.).
- It doesn't use MMIO as you can't find ioremap() or similar calls. It's
tolerant to userspace possibly also touching the same MMIO registers
via P2P DMA access.
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Suggested-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/r/20220418005000.897664-7-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The current VFIO implementation allows pci-stub driver to be bound to
a PCI device with other devices in the same IOMMU group being assigned
to userspace. The pci-stub driver has no dependencies on DMA or the
IOVA mapping of the device, but it does prevent the user from having
direct access to the device, which is useful in some circumstances.
The pci_dma_configure() marks the iommu_group as containing only devices
with kernel drivers that manage DMA. For compatibility with the VFIO
usage, avoid this default behavior for the pci_stub. This allows the
pci_stub still able to be used by the admin to block driver binding after
applying the DMA ownership to VFIO.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/r/20220418005000.897664-6-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The devices on platform/amba/fsl-mc/PCI buses could be bound to drivers
with the device DMA managed by kernel drivers or user-space applications.
Unfortunately, multiple devices may be placed in the same IOMMU group
because they cannot be isolated from each other. The DMA on these devices
must either be entirely under kernel control or userspace control, never
a mixture. Otherwise the driver integrity is not guaranteed because they
could access each other through the peer-to-peer accesses which by-pass
the IOMMU protection.
This checks and sets the default DMA mode during driver binding, and
cleanups during driver unbinding. In the default mode, the device DMA is
managed by the device driver which handles DMA operations through the
kernel DMA APIs (see Documentation/core-api/dma-api.rst).
For cases where the devices are assigned for userspace control through the
userspace driver framework(i.e. VFIO), the drivers(for example, vfio_pci/
vfio_platfrom etc.) may set a new flag (driver_managed_dma) to skip this
default setting in the assumption that the drivers know what they are
doing with the device DMA.
Calling iommu_device_use_default_domain() before {of,acpi}_dma_configure
is currently a problem. As things stand, the IOMMU driver ignored the
initial iommu_probe_device() call when the device was added, since at
that point it had no fwspec yet. In this situation,
{of,acpi}_iommu_configure() are retriggering iommu_probe_device() after
the IOMMU driver has seen the firmware data via .of_xlate to learn that
it actually responsible for the given device. As the result, before
that gets fixed, iommu_use_default_domain() goes at the end, and calls
arch_teardown_dma_ops() if it fails.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Stuart Yoder <stuyoder@gmail.com>
Cc: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Link: https://lore.kernel.org/r/20220418005000.897664-5-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Variable retval is being assigned a value that is never read, the
variable is redundant and can be removed.
Cleans up clang scan build warning:
drivers/pci/controller/pci-versatile.c:37:10: warning: Although the value
stored to 'retval' is used in the enclosing expression, the value is never
actually read from 'retval' [deadcode.DeadStores]
Link: https://lore.kernel.org/r/20220418144416.86121-1-colin.i.king@gmail.com
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Dexuan wrote:
"[...] when we disable AccelNet, the host PCI VSP driver sends a
PCI_EJECT message first, and the channel callback may set
hpdev->state to hv_pcichild_ejecting on a different CPU. This can
cause hv_compose_msi_msg() to exit from the loop and 'return', and
the on-stack variable 'ctxt' is invalid. Now, if the response
message from the host arrives, the channel callback will try to
access the invalid 'ctxt' variable, and this may cause a crash."
Schematically:
Hyper-V sends PCI_EJECT msg
hv_pci_onchannelcallback()
state = hv_pcichild_ejecting
hv_compose_msi_msg()
alloc and init comp_pkt
state == hv_pcichild_ejecting
Hyper-V sends VM_PKT_COMP msg
hv_pci_onchannelcallback()
retrieve address of comp_pkt
'free' comp_pkt and return
comp_pkt->completion_func()
Dexuan also showed how the crash can be triggered after introducing
suitable delays in the driver code, thus validating the 'assumption'
that the host can still normally respond to the guest's compose_msi
request after the host has started to eject the PCI device.
Fix the synchronization by leveraging the requestor lock as follows:
- Before 'return'-ing in hv_compose_msi_msg(), remove the ID (while
holding the requestor lock) associated to the completion packet.
- Retrieve the address *and call ->completion_func() within a same
(requestor) critical section in hv_pci_onchannelcallback().
Reported-by: Wei Hu <weh@microsoft.com>
Reported-by: Dexuan Cui <decui@microsoft.com>
Suggested-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Andrea Parri (Microsoft) <parri.andrea@gmail.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20220419122325.10078-7-parri.andrea@gmail.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Currently, pointers to guest memory are passed to Hyper-V as transaction
IDs in hv_pci. In the face of errors or malicious behavior in Hyper-V,
hv_pci should not expose or trust the transaction IDs returned by
Hyper-V to be valid guest memory addresses. Instead, use small integers
generated by vmbus_requestor as request (transaction) IDs.
Suggested-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Andrea Parri (Microsoft) <parri.andrea@gmail.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20220419122325.10078-3-parri.andrea@gmail.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
If the allocation of multiple MSI vectors for multi-MSI fails in the core
PCI framework, the framework will retry the allocation as a single MSI
vector, assuming that meets the min_vecs specified by the requesting
driver.
Hyper-V advertises that multi-MSI is supported, but reuses the VECTOR
domain to implement that for x86. The VECTOR domain does not support
multi-MSI, so the alloc will always fail and fallback to a single MSI
allocation.
In short, Hyper-V advertises a capability it does not implement.
Hyper-V can support multi-MSI because it coordinates with the hypervisor
to map the MSIs in the IOMMU's interrupt remapper, which is something the
VECTOR domain does not have. Therefore the fix is simple - copy what the
x86 IOMMU drivers (AMD/Intel-IR) do by removing
X86_IRQ_ALLOC_CONTIGUOUS_VECTORS after calling the VECTOR domain's
pci_msi_prepare().
Fixes: 4daace0d8c ("PCI: hv: Add paravirtual PCI front-end for Microsoft Hyper-V VMs")
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Link: https://lore.kernel.org/r/1649856981-14649-1-git-send-email-quic_jhugo@quicinc.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
If the driver is configured as a module (after allowing this by changing
PCIE_MICROCHIP_HOST from bool to tristate) the missing semicolon makes the
compiler very unhappy. While there isn't a real problem as
MODULE_DEVICE_TABLE always evaluates to nothing for a built-in driver,
do it right for consistency with other drivers.
Link: https://lore.kernel.org/r/20220420065832.14173-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Daire McNamara <daire.mcnamara@microchip.com>
If DT supplies the 'slot-power-limit-milliwatt' property, program
the value in the Slot Power Limit in the Slot Capabilities register
and program the Root Port to send a Set_Slot_Power_Limit Message
when the Link transitions to DL_Up.
Link: https://lore.kernel.org/r/20220412094946.27069-5-pali@kernel.org
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Add function of_pci_get_slot_power_limit(), which parses the
'slot-power-limit-milliwatt' DT property, returning the value in
milliwatts and in format ready for the PCIe Slot Capabilities Register.
Link: https://lore.kernel.org/r/20220412094946.27069-4-pali@kernel.org
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Bjorn Helgaas <bhelgaas@google.com>
Use a helper to set driver_override to the reduce amount of duplicated
code. Make the driver_override field const char, because it is not
modified by the core and it matches other subsystems.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220419113435.246203-6-krzysztof.kozlowski@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The initial configuration of ACPI power resources on some systems
implies that some PCI devices on them are initially in D3cold.
In some cases, especially for PCIe Root Ports, this is a "logical"
D3cold, meaning that the configuration space of the device is
accessible, but some of its functionality may be missing, but it
very well may be real D3cold, in which case the device will not
be accessible at all. However, the PCI bus type driver will need
to access its configuration space in order to enumerate it.
To prevent possible device enumeration failures that may ensue as
a result of ACPI power resources being initially in the "off"
state, power up all children of the host bridge ACPI device object
that hold valid _ADR objects (which indicates that they will be
enumerated by the PCI bus type driver) and do that to all children
of the ACPI device objects corresponding to PCI bridges (including
PCIe ports).
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
In 7b94b53db3 ("PCI/P2PDMA: Add Intel Sky Lake-E Root Ports B, C, D to
the whitelist"), Andrew Maier added Skylake-E 2031, 2032, and 2033 Root
Ports to the pci_p2pdma_whitelist[], so we assume P2PDMA between devices
below these ports works.
Previously we only checked the whitelist for a device at devfn 00.0 on the
root bus, which is often a "host bridge". But these Skylake Root Ports may
be at any devfn and there may be no "host bridge" device.
Generalize pci_host_bridge_dev() so we check the first device on the root
bus, whether it is devfn 00.0 or a PCIe Root Port, against the whitelist.
[bhelgaas: commit log, comment]
Link: https://lore.kernel.org/r/20220410105213.690-2-shlomop@pliops.com
Tested-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Shlomo Pongratz <shlomop@pliops.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Andrew Maier <andrew.maier@eideticom.com>
If a Root Port on Elo i2 is put into D3cold and then back into D0, the
downstream device becomes permanently inaccessible, so add a bridge D3 DMI
quirk for that system.
This was exposed by 14858dcc3b ("PCI: Use pci_update_current_state() in
pci_enable_device_flags()"), but before that commit the Root Port in
question had never been put into D3cold for real due to a mismatch between
its power state retrieved from the PCI_PM_CTRL register (which was
accessible even though the platform firmware indicated that the port was in
D3cold) and the state of an ACPI power resource involved in its power
management.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=215715
Link: https://lore.kernel.org/r/11980172.O9o76ZdvQC@kreacher
Reported-by: Stefan Gottwald <gottwald@igel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org # v5.15+
The integrated MSI Receiver enable register is always initialized in
dw_pcie_setup_rc() which is also called in resume code path, so we
don't need to save/restore the enable register during suspend/resume.
Link: https://lore.kernel.org/r/20211226074910.2722-1-jszhang@kernel.org
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Vidya Sagar <vidyas@nvidia.com>
When dma_mapping_error() returns error because of no enough memory,
but dw_pcie_host_init() returns success, which will mislead the callers.
Link: https://lore.kernel.org/r/30170911-0e2f-98ce-9266-70465b9073e5@huawei.com
Fixes: 07940c369a ("PCI: dwc: Fix MSI page leakage in suspend/resume")
Signed-off-by: Jianrong Zhang <zhangjianrong5@huawei.com>
Signed-off-by: Jiantao Zhang <water.zhangjiantao@huawei.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Rob Herring <robh@kernel.org>
The of_find_compatible_node() function returns a node pointer with
refcount incremented, We should use of_node_put() on it when done
Add the missing of_node_put() to release the refcount.
Link: https://lore.kernel.org/r/20220309091953.5630-1-linmq006@gmail.com
Fixes: 87e8657ba9 ("PCI: mediatek: Add new method to get shared pcie-cfg base address")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Miles Chen <miles.chen@mediatek.com>
Acked-by: Rob Herring <robh@kernel.org>
The ep->ob_region_map bitmap is a long and it has BITS_PER_LONG bits.
Link: https://lore.kernel.org/r/20220315065944.GB13572@kili
Fixes: cf590b0783 ("PCI: rockchip: Add EP driver for Rockchip PCIe controller")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
The ep->ob_region_map bitmap is a long and it has BITS_PER_LONG bits.
Link: https://lore.kernel.org/r/20220315065829.GA13572@kili
Fixes: 37dddf14f1 ("PCI: cadence: Add EndPoint Controller driver for Cadence PCIe controller")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Intel DG2 discrete graphics PCIe endpoints advertise L1 acceptable exit
latency to be < 1us even though they can actually tolerate unlimited exit
latencies just fine. Quirk the L1 acceptable exit latency for these
endpoints to be unlimited so ASPM L1 can be enabled.
[bhelgaas: use FIELD_GET/FIELD_PREP, wordsmith comment & commit log]
Link: https://lore.kernel.org/r/20220405093810.76613-1-mika.westerberg@linux.intel.com
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
acpi_pci_bridge_d3(dev) returns "true" if "dev" is a hotplug bridge that
can handle hotplug events while in D3. Previously this meant either:
- "dev" has a _PS0 or _PR0 method (acpi_pci_power_manageable()), or
- The Root Port above "dev" has a _DSD with a "HotPlugSupportInD3"
property with value 1.
This did not consider _PRW, which tells us about wakeup GPEs (ACPI v6.4,
sec 7.3.13). Without a wakeup GPE, from an ACPI perspective the Root Port
has no way of generating wakeup signals, so hotplug events will be lost if
we use D3.
Similarly, it did not consider _S0W, which tells us the deepest D-state
from which a device can wake itself (sec 7.3.20). If _S0W tells us the
device cannot wake from D3, hotplug events will again be lost if we use D3.
Some platforms, e.g., AMD Yellow Carp, supply "HotPlugSupportInD3" without
_PRW or with an _S0W that says the Root Port cannot wake from D3. On those
platforms, we previously put bridges in D3hot, hotplug events were lost,
and hotplugged devices would not be recognized without manually rescanning.
Allow bridges to be put in D3 only if the Root Port can generate wakeup
GPEs (wakeup.flags.valid), it can wake from D3 (_S0W), AND it has the
"HotPlugSupportInD3" property.
Neither Windows 10 nor Windows 11 puts the bridge in D3 when the firmware
is configured this way, and this change aligns the handling of the
situation to be the same.
[bhelgaas: commit log, tidy "HotPlugSupportInD3" check and comment]
Link: https://uefi.org/htmlspecs/ACPI_Spec_6_4_html/07_Power_and_Performance_Mgmt/device-power-management-objects.html?highlight=s0w#s0w-s0-device-wake-state
Link: https://docs.microsoft.com/en-us/windows-hardware/drivers/pci/dsd-for-pcie-root-ports#identifying-pcie-root-ports-supporting-hot-plug-in-d3
Link: https://lore.kernel.org/r/20220401034003.3166-1-mario.limonciello@amd.com
Fixes: 26ad34d510 ("PCI / ACPI: Whitelist D3 for more PCIe hotplug ports")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Fix the following build error:
drivers/pci/controller/pci-hyperv.c:769:13: error: ‘hv_set_msi_entry_from_desc’ defined but not used [-Werror=unused-function]
769 | static void hv_set_msi_entry_from_desc(union hv_msi_entry *msi_entry,
The arm64 implementation of hv_set_msi_entry_from_desc() is not used after
d06957d7a6 ("PCI: hv: Avoid the retarget interrupt hypercall in
irq_unmask() on ARM64"), so remove it.
Fixes: d06957d7a6 ("PCI: hv: Avoid the retarget interrupt hypercall in irq_unmask() on ARM64")
Link: https://lore.kernel.org/r/20220317085130.36388-1-yuehaibing@huawei.com
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: Boqun Feng <boqun.feng@gmail.com>
PCI pass-thru devices in a Hyper-V VM are represented as a VMBus
device and as a PCI device. The coherence of the VMbus device is
set based on the VMbus node in ACPI, but the PCI device has no
ACPI node and defaults to not hardware coherent. This results
in extra software coherence management overhead on ARM64 when
devices are hardware coherent.
Fix this by setting up the PCI host bus so that normal
PCI mechanisms will propagate the coherence of the VMbus
device to the PCI device. There's no effect on x86/x64 where
devices are always hardware coherent.
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Acked-by: Boqun Feng <boqun.feng@gmail.com>
Acked-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/1648138492-2191-3-git-send-email-mikelley@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRTLbB6QfY48x44uB6AXGG7T9hjvgUCYkF9UwAKCRCAXGG7T9hj
vsXpAPwKXI4WIQcvnVCdULQfuXpA1TbD5XZuS9OuiN/OxWHbzAEA1VHWTmS+tpZ1
ptOyoGhAWhTGeplToobDSGz5qTXEPAI=
=FaKX
-----END PGP SIGNATURE-----
Merge tag 'for-linus-5.18-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen updates from Juergen Gross:
- A bunch of minor cleanups
- A fix for kexec in Xen dom0 when executed on a high cpu number
- A fix for resuming after suspend of a Xen guest with assigned PCI
devices
- A fix for a crash due to not disabled preemption when resuming as Xen
dom0
* tag 'for-linus-5.18-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen: fix is_xen_pmu()
xen: don't hang when resuming PCI device
arch:x86:xen: Remove unnecessary assignment in xen_apic_read()
xen/grant-table: remove readonly parameter from functions
xen/grant-table: remove gnttab_*transfer*() functions
drivers/xen: use helper macro __ATTR_RW
x86/xen: Fix kerneldoc warning
xen: delay xen_hvm_init_time_ops() if kdump is boot on vcpu>=32
xen: use time_is_before_eq_jiffies() instead of open coding it
Here is the big set of char/misc and other small driver subsystem
updates for 5.18-rc1.
Included in here are merges from driver subsystems which contain:
- iio driver updates and new drivers
- fsi driver updates
- fpga driver updates
- habanalabs driver updates and support for new hardware
- soundwire driver updates and new drivers
- phy driver updates and new drivers
- coresight driver updates
- icc driver updates
Individual changes include:
- mei driver updates
- interconnect driver updates
- new PECI driver subsystem added
- vmci driver updates
- lots of tiny misc/char driver updates
There will be two merge conflicts with your tree, one in MAINTAINERS
which is obvious to fix up, and one in drivers/phy/freescale/Kconfig
which also should be easy to resolve.
All of these have been in linux-next for a while with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYkG3fQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykNEgCfaRG8CRxewDXOO4+GSeA3NGK+AIoAnR89donC
R4bgCjfg8BWIBcVVXg3/
=WWXC
-----END PGP SIGNATURE-----
Merge tag 'char-misc-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc and other driver updates from Greg KH:
"Here is the big set of char/misc and other small driver subsystem
updates for 5.18-rc1.
Included in here are merges from driver subsystems which contain:
- iio driver updates and new drivers
- fsi driver updates
- fpga driver updates
- habanalabs driver updates and support for new hardware
- soundwire driver updates and new drivers
- phy driver updates and new drivers
- coresight driver updates
- icc driver updates
Individual changes include:
- mei driver updates
- interconnect driver updates
- new PECI driver subsystem added
- vmci driver updates
- lots of tiny misc/char driver updates
All of these have been in linux-next for a while with no reported
problems"
* tag 'char-misc-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (556 commits)
firmware: google: Properly state IOMEM dependency
kgdbts: fix return value of __setup handler
firmware: sysfb: fix platform-device leak in error path
firmware: stratix10-svc: add missing callback parameter on RSU
arm64: dts: qcom: add non-secure domain property to fastrpc nodes
misc: fastrpc: Add dma handle implementation
misc: fastrpc: Add fdlist implementation
misc: fastrpc: Add helper function to get list and page
misc: fastrpc: Add support to secure memory map
dt-bindings: misc: add fastrpc domain vmid property
misc: fastrpc: check before loading process to the DSP
misc: fastrpc: add secure domain support
dt-bindings: misc: add property to support non-secure DSP
misc: fastrpc: Add support to get DSP capabilities
misc: fastrpc: add support for FASTRPC_IOCTL_MEM_MAP/UNMAP
misc: fastrpc: separate fastrpc device from channel context
dt-bindings: nvmem: brcm,nvram: add basic NVMEM cells
dt-bindings: nvmem: make "reg" property optional
nvmem: brcm_nvram: parse NVRAM content into NVMEM cells
nvmem: dt-bindings: Fix the error of dt-bindings check
...
-----BEGIN PGP SIGNATURE-----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=5Q9H
-----END PGP SIGNATURE-----
Merge tag 'pci-v5.18-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Move the VGA arbiter from drivers/gpu to drivers/pci because it's
PCI-specific, not GPU-specific (Bjorn Helgaas)
- Select the default VGA device consistently whether it's enumerated
before or after VGA arbiter init, which fixes arches that enumerate
PCI devices late (Huacai Chen)
Resource management:
- Support BAR sizes up to 8TB (Dongdong Liu)
PCIe native device hotplug:
- Fix "Command Completed" tracking to avoid spurious timouts when
powering off empty slots (Liguang Zhang)
- Quirk Qualcomm devices that don't implement Command Completed
correctly, again to avoid spurious timeouts (Manivannan Sadhasivam)
Peer-to-peer DMA:
- Add Intel 3rd Gen Intel Xeon Scalable Processors to whitelist
(Michael J. Ruhl)
APM X-Gene PCIe controller driver:
- Revert generic DT parsing changes that broke some machines in the
field (Marc Zyngier)
Freescale i.MX6 PCIe controller driver:
- Allow controller probe to succeed even when no devices currently
present to allow hot-add later (Fabio Estevam)
- Enable power management on i.MX6QP (Richard Zhu)
- Assert CLKREQ# on i.MX8MM so enumeration doesn't hang when no
device is connected (Richard Zhu)
Marvell Aardvark PCIe controller driver:
- Fix MSI and MSI-X support (Marek Behún, Pali Rohár)
- Add support for ERR and PME interrupts (Pali Rohár)
Marvell MVEBU PCIe controller driver:
- Add DT binding and support for "num-lanes" (Pali Rohár)
- Add support for INTx interrupts (Pali Rohár)
Microsoft Hyper-V host bridge driver:
- Avoid unnecessary hypercalls when unmasking IRQs on ARM64 (Boqun
Feng)
Qualcomm PCIe controller driver:
- Add SM8450 DT binding and driver support (Dmitry Baryshkov)
Renesas R-Car PCIe controller driver:
- Help the controller get to the L1 state since the hardware can't do
it on its own (Marek Vasut)
- Return PCI_ERROR_RESPONSE (~0) for reads that fail on PCIe (Marek
Vasut)
SiFive FU740 PCIe controller driver:
- Drop redundant '-gpios' from DT GPIO lookup (Ben Dooks)
- Force 2.5GT/s for initial device probe (Ben Dooks)
Socionext UniPhier Pro5 controller driver:
- Add NX1 DT binding and driver support (Kunihiko Hayashi)
Synopsys DesignWare PCIe controller driver:
- Restore MSI configuration so MSI works after resume (Jisheng
Zhang)"
* tag 'pci-v5.18-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (94 commits)
x86/PCI: Add #includes to asm/pci_x86.h
PCI: ibmphp: Remove unused assignments
PCI: cpqphp: Remove unused assignments
PCI: fu740: Remove unused assignments
PCI: kirin: Remove unused assignments
PCI: Remove unused assignments
PCI: Declare pci_filp_private only when HAVE_PCI_MMAP
PCI: Avoid broken MSI on SB600 USB devices
PCI: fu740: Force 2.5GT/s for initial device probe
PCI: xgene: Revert "PCI: xgene: Fix IB window setup"
PCI: xgene: Revert "PCI: xgene: Use inbound resources for setup"
PCI: imx6: Assert i.MX8MM CLKREQ# even if no device present
PCI: imx6: Invoke the PHY exit function after PHY power off
PCI: rcar: Use PCI_SET_ERROR_RESPONSE after read which triggered an exception
PCI: rcar: Finish transition to L1 state in rcar_pcie_config_access()
PCI: dwc: Restore MSI Receiver mask during resume
PCI: fu740: Drop redundant '-gpios' from DT GPIO lookup
PCI/VGA: Replace full MIT license text with SPDX identifier
PCI/VGA: Use unsigned format string to print lock counts
PCI/VGA: Log bridge control messages when adding devices
...
- Enforce kernel RO, and implement STRICT_MODULE_RWX for 603.
- Add support for livepatch to 32-bit.
- Implement CONFIG_DYNAMIC_FTRACE_WITH_ARGS.
- Merge vdso64 and vdso32 into a single directory.
- Fix build errors with newer binutils.
- Add support for UADDR64 relocations, which are emitted by some toolchains. This allows
powerpc to build with the latest lld.
- Fix (another) potential userspace r13 corruption in transactional memory handling.
- Cleanups of function descriptor handling & related fixes to LKDTM.
Thanks to: Abdul Haleem, Alexey Kardashevskiy, Anders Roxell, Aneesh Kumar K.V, Anton
Blanchard, Arnd Bergmann, Athira Rajeev, Bhaskar Chowdhury, Cédric Le Goater, Chen
Jingwen, Christophe JAILLET, Christophe Leroy, Corentin Labbe, Daniel Axtens, Daniel
Henrique Barboza, David Dai, Fabiano Rosas, Ganesh Goudar, Guo Zhengkui, Hangyu Hua, Haren
Myneni, Hari Bathini, Igor Zhbanov, Jakob Koschel, Jason Wang, Jeremy Kerr, Joachim
Wiberg, Jordan Niethe, Julia Lawall, Kajol Jain, Kees Cook, Laurent Dufour, Madhavan
Srinivasan, Mamatha Inamdar, Maxime Bizon, Maxim Kiselev, Maxim Kochetkov, Michal
Suchanek, Nageswara R Sastry, Nathan Lynch, Naveen N. Rao, Nicholas Piggin, Nour-eddine
Taleb, Paul Menzel, Ping Fang, Pratik R. Sampat, Randy Dunlap, Ritesh Harjani, Rohan
McLure, Russell Currey, Sachin Sant, Segher Boessenkool, Shivaprasad G Bhat, Sourabh Jain,
Thierry Reding, Tobias Waldekranz, Tyrel Datwyler, Vaibhav Jain, Vladimir Oltean, Wedson
Almeida Filho, YueHaibing.
-----BEGIN PGP SIGNATURE-----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=8r2c
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
"Livepatch support for 32-bit is probably the standout new feature,
otherwise mostly just lots of bits and pieces all over the board.
There's a series of commits cleaning up function descriptor handling,
which touches a few other arches as well as LKDTM. It has acks from
Arnd, Kees and Helge.
Summary:
- Enforce kernel RO, and implement STRICT_MODULE_RWX for 603.
- Add support for livepatch to 32-bit.
- Implement CONFIG_DYNAMIC_FTRACE_WITH_ARGS.
- Merge vdso64 and vdso32 into a single directory.
- Fix build errors with newer binutils.
- Add support for UADDR64 relocations, which are emitted by some
toolchains. This allows powerpc to build with the latest lld.
- Fix (another) potential userspace r13 corruption in transactional
memory handling.
- Cleanups of function descriptor handling & related fixes to LKDTM.
Thanks to Abdul Haleem, Alexey Kardashevskiy, Anders Roxell, Aneesh
Kumar K.V, Anton Blanchard, Arnd Bergmann, Athira Rajeev, Bhaskar
Chowdhury, Cédric Le Goater, Chen Jingwen, Christophe JAILLET,
Christophe Leroy, Corentin Labbe, Daniel Axtens, Daniel Henrique
Barboza, David Dai, Fabiano Rosas, Ganesh Goudar, Guo Zhengkui, Hangyu
Hua, Haren Myneni, Hari Bathini, Igor Zhbanov, Jakob Koschel, Jason
Wang, Jeremy Kerr, Joachim Wiberg, Jordan Niethe, Julia Lawall, Kajol
Jain, Kees Cook, Laurent Dufour, Madhavan Srinivasan, Mamatha Inamdar,
Maxime Bizon, Maxim Kiselev, Maxim Kochetkov, Michal Suchanek,
Nageswara R Sastry, Nathan Lynch, Naveen N. Rao, Nicholas Piggin,
Nour-eddine Taleb, Paul Menzel, Ping Fang, Pratik R. Sampat, Randy
Dunlap, Ritesh Harjani, Rohan McLure, Russell Currey, Sachin Sant,
Segher Boessenkool, Shivaprasad G Bhat, Sourabh Jain, Thierry Reding,
Tobias Waldekranz, Tyrel Datwyler, Vaibhav Jain, Vladimir Oltean,
Wedson Almeida Filho, and YueHaibing"
* tag 'powerpc-5.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (179 commits)
powerpc/pseries: Fix use after free in remove_phb_dynamic()
powerpc/time: improve decrementer clockevent processing
powerpc/time: Fix KVM host re-arming a timer beyond decrementer range
powerpc/tm: Fix more userspace r13 corruption
powerpc/xive: fix return value of __setup handler
powerpc/64: Add UADDR64 relocation support
powerpc: 8xx: fix a return value error in mpc8xx_pic_init
powerpc/ps3: remove unneeded semicolons
powerpc/64: Force inlining of prevent_user_access() and set_kuap()
powerpc/bitops: Force inlining of fls()
powerpc: declare unmodified attribute_group usages const
powerpc/spufs: Fix build warning when CONFIG_PROC_FS=n
powerpc/secvar: fix refcount leak in format_show()
powerpc/64e: Tie PPC_BOOK3E_64 to PPC_FSL_BOOK3E
powerpc: Move C prototypes out of asm-prototypes.h
powerpc/kexec: Declare kexec_paca static
powerpc/smp: Declare current_set static
powerpc: Cleanup asm-prototypes.c
powerpc/ftrace: Use STK_GOT in ftrace_mprofile.S
powerpc/ftrace: Regroup PPC64 specific operations in ftrace_mprofile.S
...
- Introduce new device migration uAPI and implement device specific
mlx5 vfio-pci variant driver supporting new protocol (Jason Gunthorpe,
Yishai Hadas, Leon Romanovsky)
- New HiSilicon acc vfio-pci variant driver, also supporting migration
interface (Shameer Kolothum, Longfang Liu)
- D3hot fixes for vfio-pci-core (Abhishek Sahu)
- Document new vfio-pci variant driver acceptance criteria
(Alex Williamson)
- Fix UML build unresolved ioport_{un}map() functions
(Alex Williamson)
- Fix MAINTAINERS due to header movement (Lukas Bulwahn)
-----BEGIN PGP SIGNATURE-----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=Sv96
-----END PGP SIGNATURE-----
Merge tag 'vfio-v5.18-rc1' of https://github.com/awilliam/linux-vfio
Pull VFIO updates from Alex Williamson:
- Introduce new device migration uAPI and implement device specific
mlx5 vfio-pci variant driver supporting new protocol (Jason
Gunthorpe, Yishai Hadas, Leon Romanovsky)
- New HiSilicon acc vfio-pci variant driver, also supporting migration
interface (Shameer Kolothum, Longfang Liu)
- D3hot fixes for vfio-pci-core (Abhishek Sahu)
- Document new vfio-pci variant driver acceptance criteria
(Alex Williamson)
- Fix UML build unresolved ioport_{un}map() functions
(Alex Williamson)
- Fix MAINTAINERS due to header movement (Lukas Bulwahn)
* tag 'vfio-v5.18-rc1' of https://github.com/awilliam/linux-vfio: (31 commits)
vfio-pci: Provide reviewers and acceptance criteria for variant drivers
MAINTAINERS: adjust entry for header movement in hisilicon qm driver
hisi_acc_vfio_pci: Use its own PCI reset_done error handler
hisi_acc_vfio_pci: Add support for VFIO live migration
crypto: hisilicon/qm: Set the VF QM state register
hisi_acc_vfio_pci: Add helper to retrieve the struct pci_driver
hisi_acc_vfio_pci: Restrict access to VF dev BAR2 migration region
hisi_acc_vfio_pci: add new vfio_pci driver for HiSilicon ACC devices
hisi_acc_qm: Move VF PCI device IDs to common header
crypto: hisilicon/qm: Move few definitions to common header
crypto: hisilicon/qm: Move the QM header to include/linux
vfio/mlx5: Fix to not use 0 as NULL pointer
PCI/IOV: Fix wrong kernel-doc identifier
vfio/mlx5: Use its own PCI reset_done error handler
vfio/pci: Expose vfio_pci_core_aer_err_detected()
vfio/mlx5: Implement vfio_pci driver for mlx5 devices
vfio/mlx5: Expose migration commands over mlx5 device
vfio: Remove migration protocol v1 documentation
vfio: Extend the device migration protocol with RUNNING_P2P
vfio: Define device migration protocol v2
...
- Finish transition to L1 state in rcar_pcie_config_access() because R-Car
can't do it on its own (Marek Vasut)
- Return PCI_ERROR_RESPONSE for reads that trigger PCIe errors (Marek
Vasut)
* remotes/lorenzo/pci/rcar:
PCI: rcar: Use PCI_SET_ERROR_RESPONSE after read which triggered an exception
PCI: rcar: Finish transition to L1 state in rcar_pcie_config_access()
- Save pointer to device match data instead of copying it (Dmitry
Baryshkov)
- Add ddrss_sf_tbu flag to device match data instead of checking OF
compatible string (Dmitry Baryshkov)
- Add SM8450 SoC PCIe DT bindings (Dmitry Baryshkov)
- Add SM8450 PCIe support (Dmitry Baryshkov)
* remotes/lorenzo/pci/qcom:
PCI: qcom: Add SM8450 PCIe support
PCI: qcom: Add ddrss_sf_tbu flag
PCI: qcom: Remove redundancy between qcom_pcie and qcom_pcie_cfg
dt-bindings: pci: qcom: Document PCIe bindings for SM8450
- Add Pali Rohár as pci-mvebu.c maintainer (Pali Rohár)
- Make struct pci_bridge_emul_ops const (Pali Rohár)
- Rename PCI_BRIDGE_EMUL_NO_PREFETCHABLE_BAR to
PCI_BRIDGE_EMUL_NO_PREFMEM_FORWARD since it doesn't apply to BARs (Pali
Rohár)
- Add new flag PCI_BRIDGE_EMUL_NO_IO_FORWARD for bridges that don't support
IO forwarding (Pali Rohár)
- Add Kconfig help text for CONFIG_PCI_MVEBU (Pali Rohár)
- Remove duplicate nports assignment (Pali Rohár)
- Set PCI_BRIDGE_EMUL_NO_IO_FORWARD when IO is unsupported (Pali Rohár)
- Initialize vendor, device and revision of emulated bridge (Pali Rohár)
- Fix Data Link Layer Link Active reporting on emulated bridge (Pali Rohár)
- Rearrange tests in bridge emulation for easier maintenance (Russell King)
- Add emulated bridge support for PCIe extended capabilities (Russell King)
- Add emulated bridge support for bridge Subsystem Vendor ID capability
(Pali Rohár)
- Configure Maximum Link Width based on DT "num-lanes" property (Pali
Rohár)
- Emulate bridge Subsystem Vendor ID capability (Pali Rohár)
- Emulate AER Capability (Pali Rohár)
- Use PCI core bridge->ops and bridge->child_ops to separate config
accesses to Root Port vs downstream devices (Pali Rohár)
- Unmask all INTx interrupts; they're reported via a single shared GIC
source (Pali Rohár)
- Add INTx support (Pali Rohár)
* remotes/lorenzo/pci/mvebu:
PCI: mvebu: Implement support for legacy INTx interrupts
PCI: mvebu: Fix macro names and comments about legacy interrupts
dt-bindings: PCI: mvebu: Update information about intx interrupts
PCI: mvebu: Use child_ops API
PCI: mvebu: Add support for Advanced Error Reporting registers on emulated bridge
PCI: mvebu: Add support for PCI Bridge Subsystem Vendor ID on emulated bridge
PCI: mvebu: Correctly configure x1/x4 mode
dt-bindings: PCI: mvebu: Add num-lanes property
PCI: pci-bridge-emul: Add support for PCI Bridge Subsystem Vendor ID capability
PCI: pci-bridge-emul: Add support for PCIe extended capabilities
PCI: pci-bridge-emul: Re-arrange register tests
PCI: mvebu: Fix reporting Data Link Layer Link Active on emulated bridge
PCI: mvebu: Update comment for PCI_EXP_LNKCTL register on emulated bridge
PCI: mvebu: Update comment for PCI_EXP_LNKCAP register on emulated bridge
PCI: mvebu: Properly initialize vendor, device and revision of emulated bridge
PCI: mvebu: Set PCI_BRIDGE_EMUL_NO_IO_FORWARD when IO is unsupported
PCI: mvebu: Remove duplicate nports assignment
PCI: mvebu: Add help string for CONFIG_PCI_MVEBU option
PCI: pci-bridge-emul: Add support for new flag PCI_BRIDGE_EMUL_NO_IO_FORWARD
PCI: pci-bridge-emul: Rename PCI_BRIDGE_EMUL_NO_PREFETCHABLE_BAR to PCI_BRIDGE_EMUL_NO_PREFMEM_FORWARD
PCI: pci-bridge-emul: Make struct pci_bridge_emul_ops as const
MAINTAINERS: Add Pali Rohár as pci-mvebu.c maintainer
- Allow host controller driver to probe successfully (as other drivers do)
even if link is currently down (Fabio Estevam)
- Enable i.MX6QP PCIe power management (Richard Zhu)
- Invoke PHY exit function after PHY power off (Richard Zhu)
- Assert i.MX8MM CLKREQ# even if no device present to avoid boot hangs
(Richard Zhu)
* remotes/lorenzo/pci/imx6:
PCI: imx6: Assert i.MX8MM CLKREQ# even if no device present
PCI: imx6: Invoke the PHY exit function after PHY power off
PCI: imx6: Enable i.MX6QP PCIe power management support
PCI: imx6: Allow to probe when dw_pcie_wait_for_link() fails
- Avoid retarget interrupt hypercall in irq_unmask() on ARM64 (Boqun Feng)
* remotes/lorenzo/pci/hv:
PCI: hv: Avoid the retarget interrupt hypercall in irq_unmask() on ARM64
- Drop redundant '-gpios' from DT GPIO lookup (Ben Dooks)
- Force 2.5GT/s for initial device probe to workaround enumeration issue on
SiFive Unmatched board (Ben Dooks)
* pci/host/fu740:
PCI: fu740: Force 2.5GT/s for initial device probe
PCI: fu740: Drop redundant '-gpios' from DT GPIO lookup
- Use PCI_INTERRUPT_* definitions from PCI core instead of custom ones
(Pali Rohár)
- Derive MSI number from bit(s) set in PCIE_MSI_STATUS_REG, not from
PCIE_MSI_PAYLOAD_REG (Pali Rohár)
- Align multi-MSI vectors to power of two (Pali Rohár)
- Rewrite IRQ code to use chained IRQ handler (Pali Rohár)
- Check return value of generic_handle_domain_irq() and warn about spurious
interrupts (Pali Rohár)
- Make MSI irq_chip structures static to driver (Marek Behún)
- Make msi_domain_info structure static to driver (Marek Behún)
- Use dev_fwnode() instead of of_node_to_fwnode(dev->of_node) (Marek Behún)
- Refactor unmasking of summary MSI interrupt (Pali Rohár)
- Add support for masking MSI interrupts and leave them masked at setup
(Pali Rohár)
- Set MSI doorbell address to address of struct advk_pcie (Pali Rohár)
- Enable MSI-X support (Pali Rohár)
- Add support for ERR interrupt on emulated bridge (Pali Rohár)
- Fix read of PCI_EXP_RTSTA_PME bit on emulated bridge (Pali Rohár)
- Optimize writing PCI_EXP_RTCTL_PMEIE and PCI_EXP_RTSTA_PME on emulated
bridge (Pali Rohár)
- Add support for PME interrupts (Pali Rohár)
- Fix support for PME requester on emulated bridge (Pali Rohár)
- Use separate INTA interrupt for emulated Root Port so PME and AER
interrupt is not shared with downstream devices (Pali Rohár)
- Remove irq_mask_ack() callback for INTx interrupts (Pali Rohár)
- Don't mask legacy INTx interrupts when mapping (Pali Rohár)
- Drop unnecessary "__maybe_unused" from advk_pcie_disable_phy() (Marek
Behún)
- Update comment about why we check for link being up before issuing a
config request (Marek Behún)
* remotes/lorenzo/pci/aardvark:
PCI: aardvark: Update comment about link going down after link-up
PCI: aardvark: Drop __maybe_unused from advk_pcie_disable_phy()
PCI: aardvark: Don't mask irq when mapping
PCI: aardvark: Remove irq_mask_ack() callback for INTx interrupts
PCI: aardvark: Use separate INTA interrupt for emulated root bridge
PCI: aardvark: Fix support for PME requester on emulated bridge
PCI: aardvark: Add support for PME interrupts
PCI: aardvark: Optimize writing PCI_EXP_RTCTL_PMEIE and PCI_EXP_RTSTA_PME on emulated bridge
PCI: aardvark: Fix reading PCI_EXP_RTSTA_PME bit on emulated bridge
PCI: aardvark: Add support for ERR interrupt on emulated bridge
PCI: aardvark: Enable MSI-X support
PCI: aardvark: Fix setting MSI address
PCI: aardvark: Add support for masking MSI interrupts
PCI: aardvark: Refactor unmasking summary MSI interrupt
PCI: aardvark: Use dev_fwnode() instead of of_node_to_fwnode(dev->of_node)
PCI: aardvark: Make msi_domain_info structure a static driver structure
PCI: aardvark: Make MSI irq_chip structures static driver structures
PCI: aardvark: Check return value of generic_handle_domain_irq() when processing INTx IRQ
PCI: aardvark: Rewrite IRQ code to chained IRQ handler
PCI: aardvark: Fix support for MSI interrupts
PCI: aardvark: Fix reading MSI interrupt number
PCI: aardvark: Replace custom PCIE_CORE_INT_* macros with PCI_INTERRUPT_*
- Move vgaarb.c from drivers/gpu/vga to drivers/pci (Bjorn Helgaas)
- Factor out default VGA device selection (Huacai Chen)
- Move firmware default device detection to ADD_DEVICE path so we can
select a default device regardless of whether it is enumerated before or
after vga_arb_device_init() (Huacai Chen)
- Move non-legacy VGA detection to ADD_DEVICE path (Huacai Chen)
- Move disabled VGA device detection to ADD_DEVICE path (Huacai Chen)
* pci/vga:
PCI/VGA: Replace full MIT license text with SPDX identifier
PCI/VGA: Use unsigned format string to print lock counts
PCI/VGA: Log bridge control messages when adding devices
PCI/VGA: Remove empty vga_arb_device_card_gone()
PCI/VGA: Move disabled VGA device detection to ADD_DEVICE path
PCI/VGA: Move non-legacy VGA detection to ADD_DEVICE path
PCI/VGA: Move firmware default device detection to ADD_DEVICE path
PCI/VGA: Factor out default VGA device selection
PCI/VGA: Factor out vga_select_framebuffer_device()
PCI/VGA: Move vga_arb_integrated_gpu() earlier in file
PCI/VGA: Move vgaarb to drivers/pci
- Clear pciehp cmd_busy bit when command completes in polling mode to avoid
spurious timeouts (Liguang Zhang)
- Add quirk to work around Qualcomm hardware defect in Command Completed
signaling (Manivannan Sadhasivam)
* pci/hotplug:
PCI: pciehp: Add Qualcomm quirk for Command Completed erratum
PCI: pciehp: Clear cmd_busy bit in polling mode
- Support BAR sizes up to 8TB (Dongdong Liu)
- Reduce warnings on hardware that doesn't support 8- or 16-bit PCI writes
and hence may corrupt RW1C bits (Mark Tomlinson)
* pci/enumeration:
PCI: Reduce warnings on possible RW1C corruption
PCI: Support BAR sizes up to 8TB
- Add and use #defines for normal and subtractive PCI bridges (Pali Rohár)
- Set all 24 bits of PCI class code for iproc (Pali Rohár)
* pci/bridge-class-codes:
PCI: iproc: Set all 24 bits of PCI class code
PCI: Add defines for normal and subtractive PCI bridges
- Cleanups for SCHED_DEADLINE
- Tracing updates/fixes
- CPU Accounting fixes
- First wave of changes to optimize the overhead of the scheduler build,
from the fast-headers tree - including placeholder *_api.h headers for
later header split-ups.
- Preempt-dynamic using static_branch() for ARM64
- Isolation housekeeping mask rework; preperatory for further changes
- NUMA-balancing: deal with CPU-less nodes
- NUMA-balancing: tune systems that have multiple LLC cache domains per node (eg. AMD)
- Updates to RSEQ UAPI in preparation for glibc usage
- Lots of RSEQ/selftests, for same
- Add Suren as PSI co-maintainer
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQJFBAABCgAvFiEEBpT5eoXrXCwVQwEKEnMQ0APhK1gFAmI5rg8RHG1pbmdvQGtl
cm5lbC5vcmcACgkQEnMQ0APhK1hGrw/+M3QOk6fH7G48wjlNnBvcOife6ls+Ni4k
ixOAcF4JKoixO8HieU5vv0A7yf/83tAa6fpeXeMf1hkCGc0NSlmLtuIux+WOmoAL
LzCyDEYfiP8KnVh0A1Tui/lK0+AkGo21O6ADhQE2gh8o2LpslOHQMzvtyekSzeeb
mVxMYQN+QH0m518xdO2D8IQv9ctOYK0eGjmkqdNfntOlytypPZHeNel/tCzwklP/
dElJUjNiSKDlUgTBPtL3DfpoLOI/0mHF2p6NEXvNyULxSOqJTu8pv9Z2ADb2kKo1
0D56iXBDngMi9MHIJLgvzsA8gKzHLFSuPbpODDqkTZCa28vaMB9NYGhJ643NtEie
IXTJEvF1rmNkcLcZlZxo0yjL0fjvPkczjw4Vj27gbrUQeEBfb4mfuI4BRmij63Ep
qEkgQTJhduCqqrQP1rVyhwWZRk1JNcVug+F6N42qWW3fg1xhj0YSrLai2c9nPez6
3Zt98H8YGS1Z/JQomSw48iGXVqfTp/ETI7uU7jqHK8QcjzQ4lFK5H4GZpwuqGBZi
NJJ1l97XMEas+rPHiwMEN7Z1DVhzJLCp8omEj12QU+tGLofxxwAuuOVat3CQWLRk
f80Oya3TLEgd22hGIKDRmHa22vdWnNQyS0S15wJotawBzQf+n3auS9Q3/rh979+t
ES/qvlGxTIs=
=Z8uT
-----END PGP SIGNATURE-----
Merge tag 'sched-core-2022-03-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
- Cleanups for SCHED_DEADLINE
- Tracing updates/fixes
- CPU Accounting fixes
- First wave of changes to optimize the overhead of the scheduler
build, from the fast-headers tree - including placeholder *_api.h
headers for later header split-ups.
- Preempt-dynamic using static_branch() for ARM64
- Isolation housekeeping mask rework; preperatory for further changes
- NUMA-balancing: deal with CPU-less nodes
- NUMA-balancing: tune systems that have multiple LLC cache domains per
node (eg. AMD)
- Updates to RSEQ UAPI in preparation for glibc usage
- Lots of RSEQ/selftests, for same
- Add Suren as PSI co-maintainer
* tag 'sched-core-2022-03-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (81 commits)
sched/headers: ARM needs asm/paravirt_api_clock.h too
sched/numa: Fix boot crash on arm64 systems
headers/prep: Fix header to build standalone: <linux/psi.h>
sched/headers: Only include <linux/entry-common.h> when CONFIG_GENERIC_ENTRY=y
cgroup: Fix suspicious rcu_dereference_check() usage warning
sched/preempt: Tell about PREEMPT_DYNAMIC on kernel headers
sched/topology: Remove redundant variable and fix incorrect type in build_sched_domains
sched/deadline,rt: Remove unused parameter from pick_next_[rt|dl]_entity()
sched/deadline,rt: Remove unused functions for !CONFIG_SMP
sched/deadline: Use __node_2_[pdl|dle]() and rb_first_cached() consistently
sched/deadline: Merge dl_task_can_attach() and dl_cpu_busy()
sched/deadline: Move bandwidth mgmt and reclaim functions into sched class source file
sched/deadline: Remove unused def_dl_bandwidth
sched/tracing: Report TASK_RTLOCK_WAIT tasks as TASK_UNINTERRUPTIBLE
sched/tracing: Don't re-read p->state when emitting sched_switch event
sched/rt: Plug rt_mutex_setprio() vs push_rt_task() race
sched/cpuacct: Remove redundant RCU read lock
sched/cpuacct: Optimize away RCU read lock
sched/cpuacct: Fix charge percpu cpuusage
sched/headers: Reorganize, clean up and optimize kernel/sched/sched.h dependencies
...
Remove variables and assignments that are never used.
Found by Krzysztof using cppcheck, e.g.:
$ cppcheck --enable=all --force
unreadVariable drivers/pci/hotplug/ibmphp_res.c:1958 Variable 'bus_sec' is assigned a value that is never used.
Reported-by: Krzysztof Wilczyński <kw@linux.com>
Link: https://lore.kernel.org/r/20220313192933.434746-6-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Remove variables and assignments that are never used.
Found by Krzysztof using cppcheck, e.g.:
$ cppcheck --enable=all --force
unreadVariable drivers/pci/hotplug/cpqphp_core.c:1257 Variable 'rc' is assigned a value that is never used.
Reported-by: Krzysztof Wilczyński <kw@linux.com>
Link: https://lore.kernel.org/r/20220313192933.434746-5-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
fu740_pcie_host_init() assigned "ret", but never used the value. Drop it.
Found by Krzysztof using cppcheck:
$ cppcheck --enable=all --force
unreadVariable drivers/pci/controller/dwc/pcie-fu740.c:227 Variable 'ret' is assigned a value that is never used.
Reported-by: Krzysztof Wilczyński <kw@linux.com>
Link: https://lore.kernel.org/r/20220313192933.434746-4-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
hi3660_pcie_phy_init() assigned "pdev", but never used the value. Drop it.
Found by Krzysztof using cppcheck:
$ cppcheck --enable=all --force
unreadVariable drivers/pci/controller/dwc/pcie-kirin.c:336 Variable 'pdev' is assigned a value that is never used.
Reported-by: Krzysztof Wilczyński <kw@linux.com>
Link: https://lore.kernel.org/r/20220313192933.434746-3-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Remove variables and assignments that are never used.
Found by Krzysztof using cppcheck, e.g.,
$ cppcheck --enable=all --force
uselessAssignmentPtrArg drivers/pci/proc.c:102 Assignment of function parameter has no effect outside the function. Did you forget dereferencing it?
unreadVariable drivers/pci/setup-bus.c:1528 Variable 'old_flags' is assigned a value that is never used.
Reported-by: Krzysztof Wilczyński <kw@linux.com>
Link: https://lore.kernel.org/r/20220313192933.434746-2-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
The struct pci_filp_private has no users outside drivers/pci/proc.c and is
only used when HAVE_PCI_MMAP is defined.
Wrap the struct pci_filp_private definition itself in #ifdef HAVE_PCI_MMAP.
Found by cppcheck:
$ cppcheck --enable=all --force drivers/pci/proc.c
drivers/pci/proc.c:192:6: style: struct member 'pci_filp_private::write_combine' is never used. [unusedStructMember]
Link: https://lore.kernel.org/r/20210706003145.3054881-1-kw@linux.com
Signed-off-by: Krzysztof Wilczyński <kw@linux.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
- Allow device_pm_check_callbacks() to be called from interrupt
context without issues (Dmitry Baryshkov).
- Modify devm_pm_runtime_enable() to automatically handle
pm_runtime_dont_use_autosuspend() at driver exit time (Douglas
Anderson).
- Make the schedutil cpufreq governor use to_gov_attr_set() instead
of open coding it (Kevin Hao).
- Replace acpi_bus_get_device() with acpi_fetch_acpi_dev() in the
cpufreq longhaul driver (Rafael Wysocki).
- Unify show() and store() naming in cpufreq and make it use
__ATTR_XX (Lianjie Zhang).
- Make the intel_pstate driver use the EPP value set by the firmware
by default (Srinivas Pandruvada).
- Re-order the init checks in the powernow-k8 cpufreq driver (Mario
Limonciello).
- Make the ACPI processor idle driver check for architectural
support for LPI to avoid using it on x86 by mistake (Mario
Limonciello).
- Add Sapphire Rapids Xeon support to the intel_idle driver (Artem
Bityutskiy).
- Add 'preferred_cstates' module argument to the intel_idle driver
to work around C1 and C1E handling issue on Sapphire Rapids (Artem
Bityutskiy).
- Add core C6 optimization on Sapphire Rapids to the intel_idle
driver (Artem Bityutskiy).
- Optimize the haltpoll cpuidle driver a bit (Li RongQing).
- Remove leftover text from intel_idle() kerneldoc comment and fix
up white space in intel_idle (Rafael Wysocki).
- Fix load_image_and_restore() error path (Ye Bin).
- Fix typos in comments in the system wakeup hadling code (Tom Rix).
- Clean up non-kernel-doc comments in hibernation code (Jiapeng
Chong).
- Fix __setup handler error handling in system-wide suspend and
hibernation core code (Randy Dunlap).
- Add device name to suspend_report_result() (Youngjin Jang).
- Make virtual guests honour ACPI S4 hardware signature by
default (David Woodhouse).
- Block power off of a parent PM domain unless child is in deepest
state (Ulf Hansson).
- Use dev_err_probe() to simplify error handling for generic PM
domains (Ahmad Fatoum).
- Fix sleep-in-atomic bug caused by genpd_debug_remove() (Shawn Guo).
- Document Intel uncore frequency scaling (Srinivas Pandruvada).
- Add DTPM hierarchy description (Daniel Lezcano).
- Change the locking scheme in DTPM (Daniel Lezcano).
- Fix dtpm_cpu cleanup at exit time and missing virtual DTPM pointer
release (Daniel Lezcano).
- Make dtpm_node_callback[] static (kernel test robot).
- Fix spelling mistake "initialze" -> "initialize" in
dtpm_create_hierarchy() (Colin Ian King).
- Add tracer tool for the amd-pstate driver (Jinzhou Su).
- Fix PC6 displaying in turbostat on some systems (Artem Bityutskiy).
- Add AMD P-State support to the cpupower utility (Huang Rui).
-----BEGIN PGP SIGNATURE-----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=WlR9
-----END PGP SIGNATURE-----
Merge tag 'pm-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"These are mostly fixes and cleanups all over the code and a new piece
of documentation for Intel uncore frequency scaling.
Functionality-wise, the intel_idle driver will support Sapphire Rapids
Xeons natively now (with some extra facilities for controlling
C-states more precisely on those systems), virtual guests will take
the ACPI S4 hardware signature into account by default, the
intel_pstate driver will take the defualt EPP value from the firmware,
cpupower utility will support the AMD P-state driver added in the
previous cycle, and there is a new tracer utility for that driver.
Specifics:
- Allow device_pm_check_callbacks() to be called from interrupt
context without issues (Dmitry Baryshkov).
- Modify devm_pm_runtime_enable() to automatically handle
pm_runtime_dont_use_autosuspend() at driver exit time (Douglas
Anderson).
- Make the schedutil cpufreq governor use to_gov_attr_set() instead
of open coding it (Kevin Hao).
- Replace acpi_bus_get_device() with acpi_fetch_acpi_dev() in the
cpufreq longhaul driver (Rafael Wysocki).
- Unify show() and store() naming in cpufreq and make it use
__ATTR_XX (Lianjie Zhang).
- Make the intel_pstate driver use the EPP value set by the firmware
by default (Srinivas Pandruvada).
- Re-order the init checks in the powernow-k8 cpufreq driver (Mario
Limonciello).
- Make the ACPI processor idle driver check for architectural support
for LPI to avoid using it on x86 by mistake (Mario Limonciello).
- Add Sapphire Rapids Xeon support to the intel_idle driver (Artem
Bityutskiy).
- Add 'preferred_cstates' module argument to the intel_idle driver to
work around C1 and C1E handling issue on Sapphire Rapids (Artem
Bityutskiy).
- Add core C6 optimization on Sapphire Rapids to the intel_idle
driver (Artem Bityutskiy).
- Optimize the haltpoll cpuidle driver a bit (Li RongQing).
- Remove leftover text from intel_idle() kerneldoc comment and fix up
white space in intel_idle (Rafael Wysocki).
- Fix load_image_and_restore() error path (Ye Bin).
- Fix typos in comments in the system wakeup hadling code (Tom Rix).
- Clean up non-kernel-doc comments in hibernation code (Jiapeng
Chong).
- Fix __setup handler error handling in system-wide suspend and
hibernation core code (Randy Dunlap).
- Add device name to suspend_report_result() (Youngjin Jang).
- Make virtual guests honour ACPI S4 hardware signature by default
(David Woodhouse).
- Block power off of a parent PM domain unless child is in deepest
state (Ulf Hansson).
- Use dev_err_probe() to simplify error handling for generic PM
domains (Ahmad Fatoum).
- Fix sleep-in-atomic bug caused by genpd_debug_remove() (Shawn Guo).
- Document Intel uncore frequency scaling (Srinivas Pandruvada).
- Add DTPM hierarchy description (Daniel Lezcano).
- Change the locking scheme in DTPM (Daniel Lezcano).
- Fix dtpm_cpu cleanup at exit time and missing virtual DTPM pointer
release (Daniel Lezcano).
- Make dtpm_node_callback[] static (kernel test robot).
- Fix spelling mistake "initialze" -> "initialize" in
dtpm_create_hierarchy() (Colin Ian King).
- Add tracer tool for the amd-pstate driver (Jinzhou Su).
- Fix PC6 displaying in turbostat on some systems (Artem Bityutskiy).
- Add AMD P-State support to the cpupower utility (Huang Rui)"
* tag 'pm-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (58 commits)
cpufreq: powernow-k8: Re-order the init checks
cpuidle: intel_idle: Drop redundant backslash at line end
cpuidle: intel_idle: Update intel_idle() kerneldoc comment
PM: hibernate: Honour ACPI hardware signature by default for virtual guests
cpufreq: intel_pstate: Use firmware default EPP
cpufreq: unify show() and store() naming and use __ATTR_XX
PM: core: keep irq flags in device_pm_check_callbacks()
cpuidle: haltpoll: Call cpuidle_poll_state_init() later
Documentation: amd-pstate: add tracer tool introduction
tools/power/x86/amd_pstate_tracer: Add tracer tool for AMD P-state
tools/power/x86/intel_pstate_tracer: make tracer as a module
cpufreq: amd-pstate: Add more tracepoint for AMD P-State module
PM: sleep: Add device name to suspend_report_result()
turbostat: fix PC6 displaying on some systems
intel_idle: add core C6 optimization for SPR
intel_idle: add 'preferred_cstates' module argument
intel_idle: add SPR support
PM: runtime: Have devm_pm_runtime_enable() handle pm_runtime_dont_use_autosuspend()
ACPI: processor idle: Check for architectural support for LPI
cpuidle: PSCI: Move the `has_lpi` check to the beginning of the function
...
The fu740 PCIe core does not probe any devices on the SiFive Unmatched
board without this fix (or having U-Boot explicitly start the PCIe via
either boot-script or user command). The fix is to start the link at
2.5GT/s speeds and once the link is up then change the maximum speed back
to the default.
The U-Boot driver claims to set the link-speed to 2.5GT/s to get the probe
to work (and U-Boot does print link up at 2.5GT/s) in the following code:
https://source.denx.de/u-boot/u-boot/-/blob/master/drivers/pci/pcie_dw_sifive.c?id=v2022.01#L271
Link: https://lore.kernel.org/r/20220318152430.526320-1-ben.dooks@codethink.co.uk
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Commit c7a75d0782 ("PCI: xgene: Fix IB window setup") tried to
fix the damages that 6dce5aa59e ("PCI: xgene: Use inbound resources
for setup") caused, but actually didn't improve anything for some
plarforms (at least Mustang and m400 are still broken).
Given that 6dce5aa59e has been reverted, revert this patch as well,
restoring the PCIe support on XGene to its pre-5.5, working state.
Link: https://lore.kernel.org/r/YjN8pT5e6/8cRohQ@xps13.dannf
Link: https://lore.kernel.org/r/20220321104843.949645-3-maz@kernel.org
Fixes: c7a75d0782 ("PCI: xgene: Fix IB window setup")
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: stable@vger.kernel.org
Cc: Rob Herring <robh@kernel.org>
Cc: Toan Le <toan@os.amperecomputing.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Krzysztof Wilczyński <kw@linux.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Stéphane Graber <stgraber@ubuntu.com>
Cc: dann frazier <dann.frazier@canonical.com>
Commit 6dce5aa59e ("PCI: xgene: Use inbound resources for setup")
killed PCIe on my XGene-1 box (a Mustang board). The machine itself
is still alive, but half of its storage (over NVMe) is gone, and the
NVMe driver just times out.
Note that this machine boots with a device tree provided by the
UEFI firmware (2016 vintage), which could well be non conformant
with the spec, hence the breakage.
With the patch reverted, the box boots 5.17-rc8 with flying colors.
Link: https://lore.kernel.org/all/Yf2wTLjmcRj+AbDv@xps13.dannf
Link: https://lore.kernel.org/r/20220321104843.949645-2-maz@kernel.org
Fixes: 6dce5aa59e ("PCI: xgene: Use inbound resources for setup")
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: stable@vger.kernel.org
Cc: Rob Herring <robh@kernel.org>
Cc: Toan Le <toan@os.amperecomputing.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Krzysztof Wilczyński <kw@linux.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Stéphane Graber <stgraber@ubuntu.com>
Cc: dann frazier <dann.frazier@canonical.com>
Merge changes related to system sleep, PM domains changes and power
management documentation changes for 5.18-rc1:
- Fix load_image_and_restore() error path (Ye Bin).
- Fix typos in comments in the system wakeup hadling code (Tom Rix).
- Clean up non-kernel-doc comments in hibernation code (Jiapeng
Chong).
- Fix __setup handler error handling in system-wide suspend and
hibernation core code (Randy Dunlap).
- Add device name to suspend_report_result() (Youngjin Jang).
- Make virtual guests honour ACPI S4 hardware signature by
default (David Woodhouse).
- Block power off of a parent PM domain unless child is in deepest
state (Ulf Hansson).
- Use dev_err_probe() to simplify error handling for generic PM
domains (Ahmad Fatoum).
- Fix sleep-in-atomic bug caused by genpd_debug_remove() (Shawn Guo).
- Document Intel uncore frequency scaling (Srinivas Pandruvada).
* pm-sleep:
PM: hibernate: Honour ACPI hardware signature by default for virtual guests
PM: sleep: Add device name to suspend_report_result()
PM: suspend: fix return value of __setup handler
PM: hibernate: fix __setup handler error handling
PM: hibernate: Clean up non-kernel-doc comments
PM: sleep: wakeup: Fix typos in comments
PM: hibernate: fix load_image_and_restore() error path
* pm-domains:
PM: domains: Fix sleep-in-atomic bug caused by genpd_debug_remove()
PM: domains: use dev_err_probe() to simplify error handling
PM: domains: Prevent power off for parent unless child is in deepest state
* pm-docs:
Documentation: admin-guide: pm: Document uncore frequency scaling
The CLKREQ# signal is an open drain, active low signal that is driven
low by the remote Endpoint device. But it might not be driven low if no
Endpoint device is connected.
On i.MX8MM PCIe, phy_init() may fail and system boot may hang if no
Endpoint is connected to assert CLKREQ#.
Handle this as on i.MX8MQ, where we explicitly assert CLKREQ# so the
PHY can be initialized.
Link: https://lore.kernel.org/r/1645672013-8949-1-git-send-email-hongxing.zhu@nxp.com
Fixes: 178e244cb6 ("PCI: imx: Add the imx8mm pcie support")
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
To balance phy->init_count, invoke the phy_exit() after phy_power_off().
Link: https://lore.kernel.org/r/1646289275-17813-1-git-send-email-hongxing.zhu@nxp.com
Fixes: 178e244cb6 ("PCI: imx: Add the imx8mm pcie support")
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
The gnttab_end_foreign_access() family of functions is taking a
"readonly" parameter, which isn't used. Remove it from the function
parameters.
Signed-off-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20220311103429.12845-3-jgross@suse.com
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
In case the controller is transitioning to L1 in rcar_pcie_config_access(),
any read/write access to PCIECDR triggers asynchronous external abort. This
is because the transition to L1 link state must be manually finished by the
driver. The PCIe IP can transition back from L1 state to L0 on its own.
The current asynchronous external abort hook implementation restarts
the instruction which finally triggered the fault, which can be a
different instruction than the read/write instruction which started
the faulting access. Usually the instruction which finally triggers
the fault is one which has some data dependency on the result of the
read/write. In case of read, the read value after fixup is undefined,
while a read value of faulting read should be PCI_ERROR_RESPONSE.
It is possible to enforce the fault using 'isb' instruction placed
right after the read/write instruction which started the faulting
access. Add custom register accessors which perform the read/write
followed immediately by 'isb'.
This way, the fault always happens on the 'isb' and in case of read,
which is located one instruction before the 'isb', it is now possible
to fix up the return value of the read in the asynchronous external
abort hook and make that read return PCI_ERROR_RESPONSE.
Link: https://lore.kernel.org/r/20220312212349.781799-2-marek.vasut@gmail.com
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Krzysztof Wilczyński <kw@linux.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Wolfram Sang <wsa@the-dreams.de>
Cc: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Cc: linux-renesas-soc@vger.kernel.org
In case the controller is transitioning to L1 in rcar_pcie_config_access(),
any read/write access to PCIECDR triggers asynchronous external abort. This
is because the transition to L1 link state must be manually finished by the
driver. The PCIe IP can transition back from L1 state to L0 on its own.
Avoid triggering the abort in rcar_pcie_config_access() by checking whether
the controller is in the transition state, and if so, finish the transition
right away. This prevents a lot of unnecessary exceptions, although not all
of them.
Link: https://lore.kernel.org/r/20220312212349.781799-1-marek.vasut@gmail.com
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Krzysztof Wilczyński <kw@linux.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Wolfram Sang <wsa@the-dreams.de>
Cc: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Cc: linux-renesas-soc@vger.kernel.org
- Add support for the STM32MP13 variant
- Move parent device away from struct irq_chip
- Remove all instances of non-const strings assigned to
struct irq_chip::name, enabling a nice cleanup for VIC and GIC)
- Simplify the Qualcomm PDC driver
- A bunch of SiFive PLIC cleanups
- Add support for a new variant of the Meson GPIO block
- Add support for the irqchip side of the Apple M1 PMU
- Add support for the Apple M1 Pro/Max AICv2 irqchip
- Add support for the Qualcomm MPM wakeup gadget
- Move the Xilinx driver over to the generic irqdomain handling
- Tiny speedup for IPIs on GICv3 systems
- The usual odd cleanups
-----BEGIN PGP SIGNATURE-----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=cf1B
-----END PGP SIGNATURE-----
Merge tag 'irqchip-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/core
Pull irqchip updates from Marc Zyngier:
- Add support for the STM32MP13 variant
- Move parent device away from struct irq_chip
- Remove all instances of non-const strings assigned to
struct irq_chip::name, enabling a nice cleanup for VIC and GIC)
- Simplify the Qualcomm PDC driver
- A bunch of SiFive PLIC cleanups
- Add support for a new variant of the Meson GPIO block
- Add support for the irqchip side of the Apple M1 PMU
- Add support for the Apple M1 Pro/Max AICv2 irqchip
- Add support for the Qualcomm MPM wakeup gadget
- Move the Xilinx driver over to the generic irqdomain handling
- Tiny speedup for IPIs on GICv3 systems
- The usual odd cleanups
Link: https://lore.kernel.org/all/20220313105142.704579-1-maz@kernel.org
- New support:
- Mediatek tphy support for MT8186
- Qualcomm usb phy support for sc8180x and sc8280xp
- Qualcomm ufs phy support for sc8180x and sc8280xp
- Qualcomm usb phy support for MSM8953
- Cadence D-Phy Rx support
- Sun4i support for USB phy
- Rockchip naneng combo phy support for RK3568
- Qualcomm eDP PHY for sc7280
- Updates:
- wake on support for Synopsis XHCI controllers
- Yamilify Qualcomm USB HS phy binding
- Charger detection support for TI tusb1210
-----BEGIN PGP SIGNATURE-----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=8baK
-----END PGP SIGNATURE-----
Merge tag 'phy-for-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy into char-misc-next
Vinod writes:
phy-for-5.18
- New support:
- Mediatek tphy support for MT8186
- Qualcomm usb phy support for sc8180x and sc8280xp
- Qualcomm ufs phy support for sc8180x and sc8280xp
- Qualcomm usb phy support for MSM8953
- Cadence D-Phy Rx support
- Sun4i support for USB phy
- Rockchip naneng combo phy support for RK3568
- Qualcomm eDP PHY for sc7280
- Updates:
- wake on support for Synopsis XHCI controllers
- Yamilify Qualcomm USB HS phy binding
- Charger detection support for TI tusb1210
* tag 'phy-for-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (53 commits)
phy: qcom-qmp: add sc8280xp UFS PHY
dt-bindings: phy: qcom,qmp: add sc8180x and sc8280xp ufs compatibles
phy: qcom-snps: Add sc8280xp support
dt-bindings: phy: qcom,usb-snps-femto-v2: Add sc8180x and sc8280xp
dt-bindings: Revert "dt-bindings: soc: grf: add naneng combo phy register compatible"
phy: dt-bindings: Add Cadence D-PHY Rx bindings
phy: dt-bindings: cdns,dphy: add power-domains property
phy: dt-bindings: Convert Cadence DPHY binding to YAML
phy: cadence: Add Cadence D-PHY Rx driver
dt-bindings: phy: renesas,usb2-phy: Document RZ/V2L phy bindings
Revert "PCI: aardvark: Fix initialization with old Marvell's Arm Trusted Firmware"
Revert "usb: host: xhci: mvebu: make USB 3.0 PHY optional for Armada 3720"
Revert "ata: ahci: mvebu: Make SATA PHY optional for Armada 3720"
phy: marvell: phy-mvebu-a3700-comphy: Add native kernel implementation
phy: marvell: phy-mvebu-a3700-comphy: Remove port from driver configuration
phy: phy-brcm-usb: fixup BCM4908 support
dt-bindings: phy: mediatek,tphy: Add compatible for MT8192
phy: ti: tusb1210: Add charger detection
phy: ti: tusb1210: Add a delay between power-on and restoring the phy-parameters
phy: ti: tusb1210: Drop tusb->vendor_specific2 != 0 check from tusb1210_power_on()
...
If a host that uses the IP's integrated MSI Receiver lost power
during suspend, we call dw_pcie_setup_rc() to reinit the RC. But
dw_pcie_setup_rc() always sets pp->irq_mask[ctrl] to ~0, so the mask
register is always set as 0xffffffff incorrectly, thus the MSI can't
work after resume.
Fix this issue by moving pp->irq_mask[ctrl] initialization to
dw_pcie_host_init() so we can correctly set the mask reg during both
boot and resume.
Tested-by: Richard Zhu <hongxing.zhu@nxp.com>
Link: https://lore.kernel.org/r/20211226074019.2556-1-jszhang@kernel.org
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
The calls to devm_gpiod_get_optional() have the -gpios at the end of the
name but the GPIO core code is already adding the suffix during the lookup.
This means the PCIe driver is not finding the necessary reset or power
lines to allow initialisation of the PCIe.
Drop the redundant '-gpios' when we look up GPIOs from the DT.
This bug has not been noticed because if U-Boot has setup the GPIO lines
for the hardware when it does the PCIe initialisation (either by booting
from PCIe or user command to access PCIe) then the PCIe will work in Linux.
The U-Boot as supplied by SiFive does not by default initialise any PCIe
component.
Link: https://lore.kernel.org/r/20220221210347.1335004-1-ben.dooks@codethink.co.uk
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
AIC2 changes the IRQ fwspec to add a cell. Always use the second-to-last
cell for the MSI handling, so it will work for both AIC1 and AIC2 devices.
Signed-off-by: Hector Martin <marcan@marcan.st>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220309192123.152028-2-marcan@marcan.st
Per Documentation/process/license-rules.rst, the SPDX MIT identifier is
equivalent to including the entire MIT license text from
LICENSES/preferred/MIT.
Replace the MIT license text with the equivalent SPDX identifier.
Link: https://lore.kernel.org/r/20220224224753.297579-12-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
In struct vga_device, io_lock_cnt and mem_lock_cnt are unsigned, but we
previously printed them with "%d", the signed decimal format. Print them
with the unsigned format "%u" instead.
Link: https://lore.kernel.org/r/20220224224753.297579-11-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Previously vga_arb_device_init() iterated through all VGA devices and
indicated whether legacy VGA routing to each could be controlled by an
upstream bridge.
But we determine that information in vga_arbiter_add_pci_device(), which we
call for every device, so we can log it there without iterating through the
VGA devices again.
Note that we call vga_arbiter_check_bridge_sharing() before adding the
device to vga_list, so we have to handle the very first device separately.
Link: https://lore.kernel.org/r/20220224224753.297579-10-helgaas@kernel.org
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
a37c0f4895 ("vgaarb: Select a default VGA device even if there's no
legacy VGA") extended the vga_arb_device_init() subsys_initcall so that if
there are no other eligible devices, it could select a disabled VGA device
as the default.
Move this detection from vga_arb_select_default_device() to
vga_arbiter_add_pci_device() so every device, even those hot-added or
enumerated after vga_arb_device_init() is eligible for selection as the
default VGA device.
[bhelgaas: commit log, restructure]
Link: https://lore.kernel.org/r/20211015061512.2941859-5-chenhuacai@loongson.cn
Link: https://lore.kernel.org/r/20220224224753.297579-8-helgaas@kernel.org
Signed-off-by: Huacai Chen <chenhuacai@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Daniel Axtens <dja@axtens.net>
Cc: Zhou Wang <wangzhou1@hisilicon.com>
a37c0f4895 ("vgaarb: Select a default VGA device even if there's no
legacy VGA") extended the vga_arb_device_init() subsys_initcall so it could
select a non-legacy VGA device as the default.
That failed to consider that PCI devices may be enumerated after
vga_arb_device_init(), e.g., hot-added devices or non-ACPI systems that do
PCI enumeration in pcibios_init(). Devices found then could never be
selected as the default.
One system where this is a problem is the MIPS-based Loongson where an
ASpeed AST2500 VGA device is behind a bridge that doesn't implement the VGA
Enable bit, so legacy resources are not routed to the VGA device. [1]
Fix this by moving the non-legacy VGA device selection from
vga_arb_select_default_device() to vga_arbiter_add_pci_device(), which is
called after every PCI device is enumerated, either by the
vga_arb_device_init() subsys_initcall or as an ADD_DEVICE notifier.
[1] https://lore.kernel.org/r/20210514080025.1828197-6-chenhuacai@loongson.cn
[bhelgaas: commit log, restructure]
Link: https://lore.kernel.org/r/20211015061512.2941859-5-chenhuacai@loongson.cn
Link: https://lore.kernel.org/r/20211015061512.2941859-7-chenhuacai@loongson.cn
Link: https://lore.kernel.org/r/20220224224753.297579-7-helgaas@kernel.org
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Daniel Axtens <dja@axtens.net>
Cc: Zhou Wang <wangzhou1@hisilicon.com>
Previously we selected the firmware default device, i.e., one that owns the
boot framebuffer, as the default device in vga_arb_select_default_device().
This was only done in the vga_arb_device_init() subsys_initcall, so devices
enumerated later, e.g., by pcibios_init(), were not eligible.
Fix this by moving the firmware default device selection from
vga_arb_select_default_device() to vga_arbiter_add_pci_device(), which is
called after every PCI device is enumerated, either by the
vga_arb_device_init() subsys_initcall or as an ADD_DEVICE notifier.
Note that if vga_arb_select_default_device() previously found a device
owning the boot framebuffer, it unconditionally set it to be the default
VGA device, and no subsequent device could replace it.
[bhelgaas: commit log, restructure slightly]
Link: https://lore.kernel.org/r/20211015061512.2941859-7-chenhuacai@loongson.cn
Link: https://lore.kernel.org/r/20220224224753.297579-6-helgaas@kernel.org
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Bruno Prémont <bonbons@linux-vserver.org>
Default VGA device selection fails when PCI devices are enumerated after
the vga_arb_device_init() subsys_initcall.
vga_arbiter_add_pci_device() selects the first fully enabled device to
which legacy VGA resources are routed as the default VGA device. This is
an ADD_DEVICE notifier, so it runs after every PCI device is enumerated.
vga_arb_select_default_device() may select framebuffer devices, partially
enabled GPUs, or non-legacy devices that don't have legacy VGA resources
routed to them as the default VGA device. But this only happens once, from
the vga_arb_device_init() subsys_initcall, so it doesn't consider devices
enumerated after that:
acpi_init
acpi_scan_init
acpi_pci_root_init # PCI device enumeration (ACPI systems)
vga_arb_device_init
for_each_pci_device
vga_arbiter_add_pci_device # ADD_DEVICE notifier
if (VGA-owner)
vga_set_default_device <-- set default VGA
vga_arb_select_default_device # only called ONCE
for_each_vga_device
if (framebuffer)
vga_set_default_device <-- set default VGA to framebuffer
if (!vga_default_device())
if (non-legacy, integrated GPU, etc)
vga_set_default_device <-- set default VGA
if (!vga_default_device())
vga_set_default_device <-- set default VGA
pcibios_init
pcibios_scanbus # PCI device enumeration (non-ACPI systems)
...
vga_arbiter_add_pci_device # ADD_DEVICE notification
if (VGA-owner)
vga_set_default_device <-- set default VGA
Note that on non-ACPI systems, vga_arb_select_default_device() runs before
pcibios_init(), so it sees no VGA devices and can never set a framebuffer
device, a non-legacy integrated GPU, etc., as the default device.
Factor out the default VGA device selection to vga_is_boot_device(), called
from vga_arbiter_add_pci_device().
Then we can migrate the default device selection from
vga_arb_select_default_device() to the vga_arbiter_add_pci_device() path.
[bhelgaas: commit log, split to separate patch]
Link: https://lore.kernel.org/r/20211015061512.2941859-4-chenhuacai@loongson.cn
Link: https://lore.kernel.org/r/20220224224753.297579-5-helgaas@kernel.org
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
On x86 and ia64, if a VGA device BARs include a framebuffer reported by
platform firmware, we select the device as the default VGA device. Factor
this code to a separate function. No functional change intended.
Link: https://lore.kernel.org/r/20220224224753.297579-4-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Bruno Prémont <bonbons@linux-vserver.org>
The VGA arbiter is really PCI-specific and doesn't depend on any GPU
things. Move it to the PCI subsystem.
Note that misc_init() must be called before vga_arb_device_init(). These
are both subsys_initcalls, so this ordering depends on the link order,
which is determined by drivers/Makefile:
obj-y += pci/
obj-y += char/ <-- misc_init()
obj-y += gpu/ <-- vga_arb_device_init() (before this commit)
The drivers/pci/ subsys_initcalls are called *before* misc_init(), so
convert vga_arb_device_init() to subsys_initcall_sync(), which is called
after *all* subsys_initcalls.
Link: https://lore.kernel.org/r/20220224224753.297579-2-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Currently, suspend_report_result() prints only function information.
If any driver uses a common PM function, nobody knows who exactly
called the failing function.
A device pinter is needed to recognize the failing device.
For example:
PM: dpm_run_callback(): pnp_bus_suspend+0x0/0x10 returns 0
PM: dpm_run_callback(): pci_pm_suspend+0x0/0x150 returns 0
become after the change:
serial 00:05: PM: dpm_run_callback(): pnp_bus_suspend+0x0/0x10 returns 0
pci 0000:00:01.3: PM: dpm_run_callback(): pci_pm_suspend+0x0/0x150 returns 0
Signed-off-by: Youngjin Jang <yj84.jang@samsung.com>
[ rjw: Changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Replace "-" to be ":" in comment section to be aligned with
kernel-doc format.
drivers/pci/iov.c:67: warning: Function parameter or member 'dev' not described in 'pci_iov_get_pf_drvdata'
drivers/pci/iov.c:67: warning: Function parameter or member 'pf_driver' not described in 'pci_iov_get_pf_drvdata'
Fixes: a7e9f240c0 ("PCI/IOV: Add pci_iov_get_pf_drvdata() to allow VF reaching the drvdata of a PF")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/r/8cecf7df45948a256dc56148cf9e87b2f2bb4198.1646652504.git.leonro@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
i.MX6QP PCIe supports the reset logic, thus it can reset itself to the
initialized state when exit from L2 or L3 states.
Enable the i.MX6QP PCIe suspend/resume operations support.
Link: https://lore.kernel.org/r/1645425237-4071-2-git-send-email-hongxing.zhu@nxp.com
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
For hardware that only supports 32-bit writes to PCI there is the
possibility of clearing RW1C (write-one-to-clear) bits. A rate-limited
messages was introduced by fb26592301, but rate-limiting is not the best
choice here. Some devices may not show the warnings they should if another
device has just produced a bunch of warnings. Also, the number of messages
can be a nuisance on devices which are otherwise working fine.
Change the ratelimit to a single warning per bus. This ensures no bus is
'starved' of emitting a warning and also that there isn't a continuous
stream of warnings. It would be preferable to have a warning per device,
but the pci_dev structure is not available here, and a lookup from devfn
would be far too slow.
Suggested-by: Bjorn Helgaas <helgaas@kernel.org>
Fixes: fb26592301 ("PCI: Warn on possible RW1C corruption for sub-32 bit config writes")
Link: https://lore.kernel.org/r/20200806041455.11070-1-mark.tomlinson@alliedtelesis.co.nz
Signed-off-by: Mark Tomlinson <mark.tomlinson@alliedtelesis.co.nz>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Scott Branden <scott.branden@broadcom.com>
Current kernel reports that BARs larger than 128GB, e.g., this 4TB BAR, are
disabled:
pci 0000:01:00.0: disabling BAR 4: [mem 0x00000000-0x3ffffffffff 64bit pref] (bad alignment 0x40000000000)
Increase the maximum BAR size from 128GB to 8TB for future expansion.
[bhelgaas: commit log]
Link: https://lore.kernel.org/r/20220118092117.10089-1-liudongdong3@huawei.com
Signed-off-by: Dongdong Liu <liudongdong3@huawei.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
The link to the aer-inject referenced leads to an empty repo and seems no
longer used. Replace it with the link mentioned in
Documentation/PCI/pcieaer-howto.rst.
Link: https://lore.kernel.org/r/20220115104921.21606-1-yangyicong@hisilicon.com
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
On ARM64 Hyper-V guests, SPIs are used for the interrupts of virtual PCI
devices, and SPIs can be managed directly via GICD registers. Therefore
the retarget interrupt hypercall is not needed on ARM64.
An arch-specific interface hv_arch_irq_unmask() is introduced to handle
the architecture level differences on this. For x86, the behavior
remains unchanged, while for ARM64 no hypercall is invoked when
unmasking an irq for virtual PCI devices.
Link: https://lore.kernel.org/r/20220217034525.1687678-1-boqun.feng@gmail.com
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
resulted in a recursive locking problem in the VMD driver. The cure is to
cache the relevant information upfront instead of retrieving it at runtime.
-----BEGIN PGP SIGNATURE-----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=ukul
-----END PGP SIGNATURE-----
Merge tag 'irq-urgent-2022-02-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fix from Thomas Gleixner:
"A single fix for a regression caused by the recent PCI/MSI rework
which resulted in a recursive locking problem in the VMD driver.
The cure is to cache the relevant information upfront instead of
retrieving it at runtime"
* tag 'irq-urgent-2022-02-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
PCI: vmd: Prevent recursive locking on interrupt allocation
There are some cases where a SR-IOV VF driver will need to reach into and
interact with the PF driver. This requires accessing the drvdata of the PF.
Provide a function pci_iov_get_pf_drvdata() to return this PF drvdata in a
safe way. Normally accessing a drvdata of a foreign struct device would be
done using the device_lock() to protect against device driver
probe()/remove() races.
However, due to the design of pci_enable_sriov() this will result in a
ABBA deadlock on the device_lock as the PF's device_lock is held during PF
sriov_configure() while calling pci_enable_sriov() which in turn holds the
VF's device_lock while calling VF probe(), and similarly for remove.
This means the VF driver can never obtain the PF's device_lock.
Instead use the implicit locking created by pci_enable/disable_sriov(). A
VF driver can access its PF drvdata only while its own driver is attached,
and the PF driver can control access to its own drvdata based on when it
calls pci_enable/disable_sriov().
To use this API the PF driver will setup the PF drvdata in the probe()
function. pci_enable_sriov() is only called from sriov_configure() which
cannot happen until probe() completes, ensuring no VF races with drvdata
setup.
For removal, the PF driver must call pci_disable_sriov() in its remove
function before destroying any of the drvdata. This ensures that all VF
drivers are unbound before returning, fencing concurrent access to the
drvdata.
The introduction of a new function to do this access makes clear the
special locking scheme and the documents the requirements on the PF/VF
drivers using this.
Link: https://lore.kernel.org/all/20220224142024.147653-5-yishaih@nvidia.com
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
The PCI core uses the VF index internally, often called the vf_id,
during the setup of the VF, eg pci_iov_add_virtfn().
This index is needed for device drivers that implement live migration
for their internal operations that configure/control their VFs.
Specifically, mlx5_vfio_pci driver that is introduced in coming patches
from this series needs it and not the bus/device/function which is
exposed today.
Add pci_iov_vf_id() which computes the vf_id by reversing the math that
was used to create the bus/device/function.
Link: https://lore.kernel.org/all/20220224142024.147653-2-yishaih@nvidia.com
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
In order to do P2P communication the bridge ID of the platform must be in
the P2P device table.
Update the P2P device table with a device ID for the 3rd Gen Intel Xeon
Scalable Processors.
Link: https://lore.kernel.org/r/20220209162801.7647-1-michael.j.ruhl@intel.com
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
This reverts commit b0c6ae0f89.
Armada 3720 phy driver (phy-mvebu-a3700-comphy.c) does not return
-EOPNOTSUPP from phy_power_on() callback anymore.
So remove dead code which handles -EOPNOTSUPP return value.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Marek Behún <kabel@kernel.org>
Acked-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Link: https://lore.kernel.org/r/20220203214444.1508-6-kabel@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
-----BEGIN PGP SIGNATURE-----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=8/1S
-----END PGP SIGNATURE-----
Merge tag 'pci-v5.17-fixes-5' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull pci fixes from Bjorn Helgaas:
- Fix a merge error that broke PCI device enumeration on mvebu
platforms, including Turris Omnia (Armada 385) (Pali Rohár)
- Avoid using ATS on all AMD Navi10 and Navi14 GPUs because some
VBIOSes don't account for "harvested" (disabled) parts of the chip
when initializing caches (Alex Deucher)
* tag 'pci-v5.17-fixes-5' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
PCI: Mark all AMD Navi10 and Navi14 GPU ATS as broken
PCI: mvebu: Fix device enumeration regression
There are enough VBIOS escapes without the proper workaround that some
users still hit this. Microsoft never productized ATS on Windows so OEM
platforms that were Windows-only didn't always validate ATS.
The advantages of ATS are not worth it compared to the potential
instabilities on harvested boards. Disable ATS on all Navi10 and Navi14
boards.
Symptoms include:
amdgpu 0000:07:00.0: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0007 address=0xffffc02000 flags=0x0000]
AMD-Vi: Event logged [IO_PAGE_FAULT device=07:00.0 domain=0x0007 address=0xffffc02000 flags=0x0000]
[drm:amdgpu_job_timedout [amdgpu]] *ERROR* ring sdma0 timeout, signaled seq=6047, emitted seq=6049
amdgpu 0000:07:00.0: amdgpu: GPU reset begin!
amdgpu 0000:07:00.0: amdgpu: GPU reset succeeded, trying to resume
amdgpu 0000:07:00.0: [drm:amdgpu_ring_test_helper [amdgpu]] *ERROR* ring sdma0 test failed (-110)
[drm:amdgpu_device_ip_resume_phase2 [amdgpu]] *ERROR* resume of IP block <sdma_v4_0> failed -110
amdgpu 0000:07:00.0: amdgpu: GPU reset(1) failed
Related commits:
e8946a53e2 ("PCI: Mark AMD Navi14 GPU ATS as broken")
a2da5d8cc0 ("PCI: Mark AMD Raven iGPU ATS as broken in some platforms")
45beb31d3a ("PCI: Mark AMD Navi10 GPU rev 0x00 ATS as broken")
5e89cd303e ("PCI: Mark AMD Navi14 GPU rev 0xc5 ATS as broken")
d28ca864c4 ("PCI: Mark AMD Stoney Radeon R7 GPU ATS as broken")
9b44b0b09d ("PCI: Mark AMD Stoney GPU ATS as broken")
[bhelgaas: add symptoms and related commits]
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1760
Link: https://lore.kernel.org/r/20220222160801.841643-1-alexander.deucher@amd.com
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Guchun Chen <guchun.chen@amd.com>
On SM8450 platform PCIe hosts do not use all the clocks (and add several
additional clocks), so expand the driver to handle these requirements.
PCIe0 and PCIe1 hosts use different sets of clocks, so separate entries
are required.
Link: https://lore.kernel.org/r/20220223101435.447839-5-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com>
Qualcomm PCIe driver uses compatible string to check if the ddrss_sf_tbu
clock should be used. Since sc7280 support has added flags, switch to
the new mechanism to check if this clock should be used.
Link: https://lore.kernel.org/r/20220223101435.447839-4-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com>
In preparation to adding more flags to configuration data, use pointer
to struct qcom_pcie_cfg directly inside struct qcom_pcie, rather than
duplicating all its fields. This would save us from the boilerplate code
that just copies flag values from one struct to another one.
Link: https://lore.kernel.org/r/20220223101435.447839-3-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com>
This adds support for legacy INTx interrupts received from other PCIe
devices and which are reported by a new INTx irq chip.
With this change, kernel can distinguish between INTA, INTB, INTC and INTD
interrupts.
Note that for this support, device tree files has to be properly adjusted
to provide "interrupts" or "interrupts-extended" property with intx
interrupt source, "interrupt-names" property with "intx" string and also
'interrupt-controller' subnode must be defined.
If device tree files do not provide these nodes then driver would work as
before.
Link: https://lore.kernel.org/r/20220222155030.988-12-pali@kernel.org
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Register 0x1910 unmasks interrupts and legacy INTx interrupts are unmasked
because driver does not support individual masking yet.
Link: https://lore.kernel.org/r/20220222155030.988-11-pali@kernel.org
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Split struct pci_ops between ops and child_ops. Member ops is used for
accessing PCIe Root Ports via pci-bridge-emul.c driver and child_ops for
accessing real PCIe cards.
There is no need to mix these two struct pci_ops into one as PCI core code
already provides separate callbacks via bridge->ops and bridge->child_ops.
Link: https://lore.kernel.org/r/20220222155030.988-9-pali@kernel.org
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
AER registers start at mvebu offset 0x0100. Registers PCI_ERR_ROOT_COMMAND,
PCI_ERR_ROOT_STATUS and PCI_ERR_ROOT_ERR_SRC are not supported on pre-XP
hardware and returns zeros.
Note that AER interrupt is not supported yet as mvebu emulated bridge does
not implement interrupts support at all yet.
Also remove custom macro PCIE_HEADER_LOG_4_OFF as it is unused and
correctly this register should be referenced via standard macros with
offset, e.g. as: PCIE_CAP_PCIERR_OFF + PCI_ERR_HEADER_LOG + 4.
Link: https://lore.kernel.org/r/20220222155030.988-8-pali@kernel.org
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Register with Subsystem Device/Vendor ID is at offset 0x2c. Export is via
emulated bridge.
After this change Subsystem ID is visible in lspci output at line:
Capabilities: [40] Subsystem
Link: https://lore.kernel.org/r/20220222155030.988-7-pali@kernel.org
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
If x1/x4 mode is not set correctly then link with endpoint card is not
established.
Use DTS property 'num-lanes' to deteriminate x1/x4 mode.
Link: https://lore.kernel.org/r/20220222155030.988-6-pali@kernel.org
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
This is read-only capability in PCI config space. Put it between base PCI
capability and base PCI Express capability.
Driver just have to specify subsystem_vendor_id and subsystem_id fields in
emulated bridge structure and pci-bridge-emul takes care of correctly
compose PCI Bridge Subsystem Vendor ID capability.
Link: https://lore.kernel.org/r/20220222155030.988-4-pali@kernel.org
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Add support for PCIe extended capabilities, which we just redirect to the
emulating driver.
[pali: Fix writing new value with W1C bits]
Link: https://lore.kernel.org/r/20220222155030.988-3-pali@kernel.org
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Re-arrange the tests for which sets of registers are being accessed so that
it is easier to add further regions later. No functional change.
[pali: Fix reading old value in pci_bridge_emul_conf_write]
Link: https://lore.kernel.org/r/20220222155030.988-2-pali@kernel.org
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmISrYgeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGg20IAKDZr7rfSHBopjQV
Cocw744tom0XuxpvSZpp2GGOOXF+tkswcNNaRIrbGOl1mkyxA7eBZCTMpDeDS9aQ
wB0D0Gxx8QBAJp4KgB1W7TB+hIGes/rs8Ve+6iO4ulLLdCVWX/q2boI0aZ7QX9O9
qNi8OsoZQtk6falRvciZFHwV5Av1p2Sy1AW57udQ7DvJ4H98AfKf1u8/z208WWW8
1ixC+qJxQcUcM9vI+7P9Tt7NbFSKv8SvAmqjFY7P+DxQAsVw6KXoqVXykDzeOv0t
fUNOE/t0oFZafwtn8h7KBQnwS9lH03+3KkslVZs+iMFyUj/Bar+NVVyKoDhWXtVg
/PuMhEg=
=eU1o
-----END PGP SIGNATURE-----
Merge tag 'v5.17-rc5' into sched/core, to resolve conflicts
New conflicts in sched/core due to the following upstream fixes:
44585f7bc0 ("psi: fix "defined but not used" warnings when CONFIG_PROC_FS=n")
a06247c680 ("psi: Fix uaf issue when psi trigger is destroyed while being polled")
Conflicts:
include/linux/psi_types.h
kernel/sched/psi.c
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tejas reported the following recursive locking issue:
swapper/0/1 is trying to acquire lock:
ffff8881074fd0a0 (&md->mutex){+.+.}-{3:3}, at: msi_get_virq+0x30/0xc0
but task is already holding lock:
ffff8881017cd6a0 (&md->mutex){+.+.}-{3:3}, at: __pci_enable_msi_range+0xf2/0x290
stack backtrace:
__mutex_lock+0x9d/0x920
msi_get_virq+0x30/0xc0
pci_irq_vector+0x26/0x30
vmd_msi_init+0xcc/0x210
msi_domain_alloc+0xbf/0x150
msi_domain_alloc_irqs_descs_locked+0x3e/0xb0
__pci_enable_msi_range+0x155/0x290
pci_alloc_irq_vectors_affinity+0xba/0x100
pcie_port_device_register+0x307/0x550
pcie_portdrv_probe+0x3c/0xd0
pci_device_probe+0x95/0x110
This is caused by the VMD MSI code which does a lookup of the Linux
interrupt number for an VMD managed MSI[X] vector. The lookup function
tries to acquire the already held mutex.
Avoid that by caching the Linux interrupt number at initialization time
instead of looking it up over and over.
Fixes: 82ff8e6b78 ("PCI/MSI: Use msi_get_virq() in pci_get_vector()")
Reported-by: "Surendrakumar Upadhyay, TejaskumarX" <tejaskumarx.surendrakumar.upadhyay@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: "Surendrakumar Upadhyay, TejaskumarX" <tejaskumarx.surendrakumar.upadhyay@intel.com>
Cc: linux-pci@vger.kernel.org
Link: https://lore.kernel.org/r/87a6euub2a.ffs@tglx
Register 0x43c in its low 24 bits contains PCI class code.
Update code to set all 24 bits of PCI class code and not only upper 16 bits
of PCI class code.
Use a new macro PCI_CLASS_BRIDGE_PCI_NORMAL which represents whole 24 bits
of normal PCI bridge class.
Link: https://lore.kernel.org/r/20220214114109.26809-2-pali@kernel.org
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Roman Bacik <roman.bacik@broadcom.com>
Acked-by: Ray Jui <ray.jui@broadcom.com>
Add these PCI class codes to pci_ids.h:
PCI_CLASS_BRIDGE_PCI_NORMAL
PCI_CLASS_BRIDGE_PCI_SUBTRACTIVE
Use these defines in all kernel code for describing PCI class codes for
normal and subtractive PCI bridges.
[bhelgaas: similar change in pci-mvebu.c]
Link: https://lore.kernel.org/r/20220214114109.26809-1-pali@kernel.org
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Refer to housekeeping APIs using single feature types instead of flags.
This prevents from passing multiple isolation features at once to
housekeeping interfaces, which soon won't be possible anymore as each
isolation features will have their own cpumask.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Juri Lelli <juri.lelli@redhat.com>
Reviewed-by: Phil Auld <pauld@redhat.com>
Link: https://lore.kernel.org/r/20220207155910.527133-5-frederic@kernel.org
To prepare for supporting each feature of the housekeeping cpumask
toward cpuset, prepare each of the HK_FLAG_* entries to move to their
own cpumask with enforcing to fetch them individually. The new
constraint is that multiple HK_FLAG_* entries can't be mixed together
anymore in a single call to housekeeping cpumask().
This will later allow, for example, to runtime modify the cpulist passed
through "isolcpus=", "nohz_full=" and "rcu_nocbs=" kernel boot
parameters.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Juri Lelli <juri.lelli@redhat.com>
Reviewed-by: Phil Auld <pauld@redhat.com>
Link: https://lore.kernel.org/r/20220207155910.527133-2-frederic@kernel.org
-----BEGIN PGP SIGNATURE-----
iQFHBAABCAAxFiEEIbPD0id6easf0xsudhRwX5BBoF4FAmILjZgTHHdlaS5saXVA
a2VybmVsLm9yZwAKCRB2FHBfkEGgXuPAB/96ls6ZaUrvAEseODu9N+qbCKCjqjGx
LBqP5gzzG71LoFLlvvGp7quwDXkSlfzMmZM1oxBrsRN4TiexdQ4b9tR2jNqxUBS0
pR7efRpR4YN1TrvxCr0lgfbKV6F3EC4YqMwK2Tf7zMRkzAbMQmw500JTkAdtplUT
opSZKlWt1Q66Iudz7vwz2e2D/NnAg03icB7lZUNulV1WTDfDfBUZyAphAnOqpty9
Y9UlVjFYSozOA6dv3HClYiJPjxhzUev88W/Sld81+2+gGCngWRT4a2OyUvCqNWXD
P8EswLHuqECpkz6uxnbQOLDBgdiMXigtANNky/E4Za8r9MqpZT3+ueLf
=/jBG
-----END PGP SIGNATURE-----
Merge tag 'hyperv-fixes-signed-20220215' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull hyperv fixes from Wei Liu:
- Rework use of DMA_BIT_MASK in vmbus to work around a clang bug
(Michael Kelley)
- Fix NUMA topology (Long Li)
- Fix a memory leak in vmbus (Miaoqian Lin)
- One minor clean-up patch (Cai Huoqing)
* tag 'hyperv-fixes-signed-20220215' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
Drivers: hv: utils: Make use of the helper macro LIST_HEAD()
Drivers: hv: vmbus: Rework use of DMA_BIT_MASK(64)
Drivers: hv: vmbus: Fix memory leak in vmbus_add_channel_kobj
PCI: hv: Fix NUMA node assignment when kernel boots with custom NUMA topology
-----BEGIN PGP SIGNATURE-----
iQJIBAABCgAyFiEEgMe7l+5h9hnxdsnuWYigwDrT+vwFAmIGxuwUHGJoZWxnYWFz
QGdvb2dsZS5jb20ACgkQWYigwDrT+vwzpw//bhk1CNIiUSzRrBtIFmQZjb8TJM4Q
WCBI5t0mX9l9KswdbKlY9kaEOf/Z0bGFRwV7ps8mCKJc1X+S5GXmI/NLUcEP2GB8
/YhTBEH8FTcaC2gPC2+F5Mt8L1j6oySmH7hENZKxXFJQha5+B/LzhvARsc+YeQvv
cihSCcYn2rNmSFel369YI8VfPmlgs7pvXQOnwRzg+R/f9aklA30WC2t1fnjC5v/0
N58p7eK9orRzw60bA5mbhjmXTlMZmgPjeVN8SnkqQmrBGCDEP/6k/ByPW+GffqNf
oygr3ycnveDUlYDn63uFDmS9ruiRBnAZuKxOdUDHryF0zb2vqL/lIdvblFEHbPP5
5ObQq9FWHQxc6WbxBCo3WssZkjRfEvw+uvMe5naFzw6Xva8FeSaAMY5jtyWOEKxo
aya+c+pQVlA+9pUcW54quYMMhvCbVy/kWokJ+OkZaPNKr3HJrqOOGTg4nOJ3uNWQ
KqhkrowPHn/g//YtZph1b//gUjL7PmtjdnLgM8OP+0ZdDXXcUaIGDF1Dbwj70GKJ
hji7iy+sAg0WVeSydkBrsUTtNJnpZvskoIa11oXcdWoLTXtWyw/WfAWNYIQCWbqV
l8FtvS3POo22C0r1dTue5MEqMI8lVJfS5rOZJGtMqPbcK8zrgXd031nH3staH+Ok
1mIcw8PDcnXllYY=
=uilL
-----END PGP SIGNATURE-----
Merge tag 'pci-v5.17-fixes-4' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull pci fix from Bjorn Helgaas:
"Revert a commit that reduced the number of IRQs used but resulted in
interrupt storms (Bjorn Helgaas)"
* tag 'pci-v5.17-fixes-4' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
Revert "PCI/portdrv: Do not setup up IRQs if there are no users"
This reverts commit 0e8ae5a6ff.
0e8ae5a6ff ("PCI/portdrv: Do not setup up IRQs if there are no users")
reduced usage of IRQs when we don't think we need them. But Joey, Sergiu,
and David reported choppy GUI rendering, systems that became unresponsive
every few seconds, incorrect values reported by cpufreq, and high IRQ 16
CPU usage.
Joey bisected the issues to 0e8ae5a6ff, so revert it until we figure out
a better solution.
Link: https://lore.kernel.org/r/20220210222717.GA658201@bhelgaas
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215533
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215546
Reported-by: Joey Corleone <joey.corleone@mail.ru>
Reported-by: Sergiu Deitsch <sergiu.deitsch@gmail.com>
Reported-by: David Spencer <dspencer577@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org # v5.16+
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Add basic support for UniPhier NX1 SoC as non-legacy SoC. This includes
a compatible string, SoC-dependent data containing init() and wait()
functions for the controller.
Link: https://lore.kernel.org/r/1644480596-20037-4-git-send-email-hayashi.kunihiko@socionext.com
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Define SoC data structure that includes pci_epc_features, SoC-dependent
callback functions and flags to distinguish the behavior of each SoC.
The callback functions define init() to initialize the controller and
wait() to wait until initialization is completed.
Rename uniphier_pcie_init_ep() to uniphier_pcie_pro5_init_ep() for
initializing PCIe controller implemented in Pro5 SoC. And Pro5 SoC
doesn't have wait() function.
Link: https://lore.kernel.org/r/1644480596-20037-3-git-send-email-hayashi.kunihiko@socionext.com
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Rob Herring <robh@kernel.org>
The Qualcomm PCI bridge device (Device ID 0x0110) found in chipsets such as
SM8450 does not set the Command Completed bit unless writes to the Slot
Command register change "Control" bits.
This results in timeouts like below:
pcieport 0001:00:00.0: pciehp: Timeout on hotplug command 0x03c0 (issued 2020 msec ago)
Add the device to the Command Completed quirk to mark commands "completed"
immediately unless they change the "Control" bits.
Link: https://lore.kernel.org/r/20220210145003.135907-1-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Update the comment about what happens when link goes down after we have
checked for link-up. If a PIO request is done while link-down, we have
a serious problem.
Link: https://lore.kernel.org/r/20220110015018.26359-23-kabel@kernel.org
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
This function is now always used in driver remove method, drop the
__maybe_unused attribute.
Link: https://lore.kernel.org/r/20220110015018.26359-22-kabel@kernel.org
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
By default, all Legacy INTx interrupts are masked, so there is no need to
mask this interrupt during irq_map() callback.
Link: https://lore.kernel.org/r/20220110015018.26359-21-kabel@kernel.org
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
