linux/drivers/pci
Richard Zhu 45514f78c6 PCI: imx6: Assert i.MX8MM CLKREQ# even if no device present
The CLKREQ# signal is an open drain, active low signal that is driven
low by the remote Endpoint device. But it might not be driven low if no
Endpoint device is connected.

On i.MX8MM PCIe, phy_init() may fail and system boot may hang if no
Endpoint is connected to assert CLKREQ#.

Handle this as on i.MX8MQ, where we explicitly assert CLKREQ# so the
PHY can be initialized.

Link: https://lore.kernel.org/r/1645672013-8949-1-git-send-email-hongxing.zhu@nxp.com
Fixes: 178e244cb6 ("PCI: imx: Add the imx8mm pcie support")
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
2022-03-17 08:59:59 +00:00
..
controller PCI: imx6: Assert i.MX8MM CLKREQ# even if no device present 2022-03-17 08:59:59 +00:00
endpoint Merge branch 'pci/misc' 2022-01-13 09:57:52 -06:00
hotplug Merge branch 'pci/errors' 2022-01-13 09:57:52 -06:00
msi PCI/MSI: Unbreak pci_irq_get_affinity() 2021-12-18 20:33:21 +01:00
pcie Merge branch 'pci/errors' 2022-01-13 09:57:52 -06:00
switch PCI/switchtec: Declare local state_names[] as static 2021-11-19 12:14:02 -06:00
access.c PCI: Use PCI_ERROR_RESPONSE to identify config read errors 2021-11-18 14:31:43 -06:00
ats.c PCI: Allow PASID on fake PCIe devices without TLP prefixes 2021-08-26 14:21:42 -05:00
bus.c
ecam.c PCI: Dynamically map ECAM regions 2021-06-16 17:20:40 -05:00
host-bridge.c PCI: VMD: ACPI: Make ACPI companion lookup work for VMD bus 2021-09-02 17:59:58 +02:00
iov.c Revert "PCI: Use to_pci_driver() instead of pci_dev->driver" 2021-11-11 13:36:22 -06:00
irq.c
Kconfig PCI: hv: Add arm64 Hyper-V vPCI support 2022-01-12 08:24:29 -06:00
Makefile PCI/MSI: Move code into a separate directory 2021-12-09 11:52:22 +01:00
mmap.c
of.c PCI: Correct misspelled words 2022-01-07 20:43:23 -06:00
p2pdma.c pci-v5.17-changes 2022-01-16 08:08:11 +02:00
pci-acpi.c Merge branch 'pm-pci' 2021-11-02 19:06:30 +01:00
pci-bridge-emul.c Merge branch 'remotes/lorenzo/pci/bridge-emul' 2022-01-13 09:57:51 -06:00
pci-bridge-emul.h PCI: pci-bridge-emul: Add PCIe Root Capabilities Register 2021-08-05 10:51:49 +01:00
pci-driver.c Revert "PCI: Use to_pci_driver() instead of pci_dev->driver" 2021-11-11 13:36:22 -06:00
pci-label.c PCI/sysfs: Use sysfs_emit() and sysfs_emit_at() in "show" functions 2021-06-03 22:14:47 -05:00
pci-mid.c PCI: PM: Do not use pci_platform_pm_ops for Intel MID PM 2021-09-27 17:13:21 +02:00
pci-pf-stub.c
pci-stub.c
pci-sysfs.c PCI/sysfs: Use pci_irq_vector() 2021-12-09 11:52:21 +01:00
pci.c pci-v5.17-changes 2022-01-16 08:08:11 +02:00
pci.h pci-v5.16-changes 2021-11-06 14:36:12 -07:00
probe.c pci-v5.17-changes 2022-01-16 08:08:11 +02:00
proc.c proc: remove PDE_DATA() completely 2022-01-22 08:33:37 +02:00
quirks.c pci-v5.17-changes 2022-01-16 08:08:11 +02:00
remove.c PCI: Remove reset_fn field from pci_dev 2021-08-17 17:44:38 -05:00
rom.c PCI: Prefer 'unsigned int' over bare 'unsigned' 2021-10-27 13:41:22 -05:00
search.c PCI: Remove WARN_ON(in_interrupt()) 2021-02-10 16:46:29 -06:00
setup-bus.c PCI: Prefer 'unsigned int' over bare 'unsigned' 2021-10-27 13:41:22 -05:00
setup-irq.c PCI: Tidy comments 2021-09-28 13:43:17 -05:00
setup-res.c PCI: Work around Intel I210 ROM BAR overlap defect 2022-01-11 09:33:10 -06:00
slot.c PCI/sysfs: Use default_groups in kobj_type for slot attrs 2021-12-29 13:42:04 -06:00
syscall.c PCI: Return int from pciconfig_read() syscall 2021-08-03 16:55:48 -05:00
vc.c
vpd.c PCI/VPD: Use pci_read_vpd_any() in pci_vpd_size() 2021-10-25 19:12:23 -05:00
xen-pcifront.c xen/pcifront: Rework MSI handling 2021-12-16 22:22:18 +01:00