Commit Graph

7929 Commits

Author SHA1 Message Date
horia.geanta@freescale.com
5757e06c69 arm: ls102xa: enable snooping for CAAM transactions
Enable snooping for CAAM read & write transactions by
programming the SCFG snoop configuration register:
SCFG_SNPCNFGCR[SECRDSNP]
SCFG_SNPCNFGCR[SECWRSNP]

Signed-off-by: Horia Geantă <horia.geanta@freescale.com>
Reviewed-by: Zhengxiong Jin <Jason.Jin@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
2015-10-29 10:33:58 -07:00
Aneesh Bansal
f4f0b7403a Data types defined for 64 bit physical address
Data types and I/O functions have been defined for
64 bit physical addresses in arm.

Signed-off-by: Aneesh Bansal <aneesh.bansal@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
2015-10-29 10:33:57 -07:00
Alison Wang
0cbba8e953 ls102xa: fdt: Disable IFC in SD boot for QSPI
As QSPI/DSPI and IFC are pin multiplexed, IFC is disabled
in SD boot for QSPI. This patch will add fdt support for
this rule.

Signed-off-by: Alison Wang <alison.wang@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
2015-10-29 10:33:56 -07:00
Alison Wang
6a00a9cb15 armv8/fsl-lsch3: fdt: Check the pointer returned from call to a function may be NULL
Pointer 'reg' returned from call to function 'fdt_getprop' may be
NULL, will be passed to function and may be dereferenced there by
passing argument 1 to function 'of_read_number'. So check pointer
'reg' first.

Signed-off-by: Alison Wang <alison.wang@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
2015-10-26 09:09:55 -07:00
Masahiro Yamada
09f3ca3dd5 arm, powerpc: select SYS_GENERIC_BOARD
We have finished Generic Board conversion for ARM and PowerPC, i.e.
all the boards have been converted except OpenRISC, SuperH, SPARC,
which have not supported Generic Board framework yet.

Select SYS_GENERIC_BOARD in arch/Kconfig and delete all the macro
defines in include/configs/*.h.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2015-10-24 13:50:38 -04:00
Simon Glass
5fa030b9f0 zynq: Move SPL console init out of board_init_f()
We should not init the console this early since it precludes using driver
model for the UART, since it is not set up at the start of board_init_f().
See the README for more information. The debug UART does not have this
restriction. If we want to do early init with the console on it can be done
in spl_board_init().

Move the preloader_console_init() call from board_init_f() to board_init_r().

Signed-off-by: Simon Glass <sjg@chromium.org>
Tested-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Tested-by: Michal Simek <michal.simek@xilinx.com>
2015-10-24 13:50:37 -04:00
Simon Glass
cd2bee3544 microblaze: Add a TODO to call board_init_f_mem()
This C function should be used to do the early memory layout and init. This
is beyond my powers, so just add a TODO for the maintainer.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Michal Simek <michal.simek@xilinx.com>
2015-10-24 13:50:37 -04:00
Simon Glass
5ba534d247 arm: Switch 32-bit ARM to using generic global_data setup
There is quite a bit of assembler code that can be removed if we use the
generic global_data setup. Less arch-specific code makes it easier to add
new features and maintain the start-up code.

Drop the unneeded code and adjust the hooks in board_f.c to cope.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-10-24 13:50:36 -04:00
Simon Glass
931bec31b4 arm: Switch aarch64 to using generic global_data setup
There is quite a bit of assembler code that can be removed if we use the
generic global_data setup. Less arch-specific code makes it easier to add
new features and maintain the start-up code.

Drop the unneeded code and adjust the hooks in board_f.c to cope.

Tested on LS2085ARDB and LS2085AQDS (armv8 SoC).
Tested-by: York Sun <yorksun@freescale.com>

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-10-24 13:50:36 -04:00
Thomas Chou
8a3ea97966 nios2: fix virt_to_phys for nios2 with MMU
As the virtual address and physical address mapping of nios2 with
MMU are different. Add a check of MMU, and fix the mapping.

Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
Acked-by: Marek Vasut <marex@denx.de>
Reviewed-by: Ley Foon Tan <lftan@altera.com>
2015-10-23 14:55:48 +08:00
Thomas Chou
6168dc6a7a nios2: zap nios2-generic board dir
As we use device tree to control u-boot now, the generic
board can be removed.

Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
2015-10-23 14:55:36 +08:00
Thomas Chou
7cacb64a35 nios2: convert dma_alloc_coherent to use malloc_cache_aligned
Convert dma_alloc_coherent to use memalign.

Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
Reviewed-by: Marek Vasut <marex@denx.de>
2015-10-23 07:59:03 +08:00
Thomas Chou
b8112091bb nios2: convert copy_exception_trampoline to use dm cpu data
Convert copy_exception_trampoline() to use dm cpu data.

Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
2015-10-23 07:58:58 +08:00
Thomas Chou
21ff7344d1 nios2: convert cache flush to use dm cpu data
Convert cache flush to use dm cpu data.

The original cache flush functions are written in assembly
and use CONFIG_SYS_{I,D}CACHE_SIZE... macros. It is difficult
to convert to use cache configuration in dm cpu data which is
extracted from device tree.

The cacheflush.c of Linux nios2 arch uses cpuinfo structure,
which is very close to our dm cpu data. So we copy and modify
it to arch/nios2/lib/cache.c to replace the old cache.S.

Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
2015-10-23 07:58:20 +08:00
Thomas Chou
55e2b4d4e5 nios2: set default cache configuration in start.S
Set default icache and dcache configuration for start.S.

We want to remove the CONFIG_SYS_{I,D}CACHE_SIZE...
configuration macros. As we are just barely starting from
reset, there is no luxury of device tree.

We will set some maximum cache configuration so that it will
work for most configurations. This is used only in this
start.S. The speed penalty is only once here.

After start up, during board initialization, cpu information
will be extracted from device tree. Then cache flush operations
will have correct cache configurations.

Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
Acked-by: Marek Vasut <marex@denx.de>
2015-10-23 07:37:20 +08:00
Thomas Chou
4a572fa851 nios2: clean up comments style in start.S
Clean up comments style in start.S.

Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
2015-10-23 07:37:20 +08:00
Thomas Chou
a64be6124a nios2: convert ioremap to use dm cpu data
Convert ioremap() to use io_region_base in dm cpu global data.

Also remove three unused io functions, which have style issue
and are replaced by macros already.

Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
2015-10-23 07:37:20 +08:00
Thomas Chou
121e36dacd nios2: convert do_reset to use dm cpu data
Convert do_reset to use dm cpu data.

Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
Reviewed-by: Simon Glass <sjg@chromium.org>
2015-10-23 07:37:20 +08:00
Thomas Chou
6368c3e75f nios2: remove asm/psr.h
Remove asm/psr.h, which is not used.
Also clean up asm/sections.h and unaligned.h.

Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
Reviewed-by: Marek Vasut <marex@denx.de>
2015-10-23 07:37:20 +08:00
Thomas Chou
ca844dd8c5 nios2: convert altera sysid to driver model
Convert altera sysid to driver model with misc uclass.

Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
Acked-by: Chin Liang See <clsee@altera.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2015-10-23 07:37:03 +08:00
Thomas Chou
a54915d8a1 nios2: convert altera timer to driver model
Convert altera timer to driver model.

Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
Acked-by: Chin Liang See <clsee@altera.com>
2015-10-23 07:37:03 +08:00
Thomas Chou
bcae80e955 nios2: convert nios2 cpu to driver model
Convert nios2 cpu to driver model. The cpu parameters are
extracted from device tree and saved to global data structure.
We will use them to replace the custom_fpga.h .

Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
Reviewed-by: Simon Glass <sjg@chromium.org>
2015-10-23 07:37:03 +08:00
Thomas Chou
88d5ecf4b9 nios2 : convert altera_pio to driver model
Convert altera_pio to driver model.

Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
Acked-by: Chin Liang See <clsee@altera.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2015-10-23 07:37:03 +08:00
Thomas Chou
d21275ef5e nios2: add clear and set bits macros
These macros can be used to clear and set multiple bits
in a register using a single call.

Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
Reviewed-by: Marek Vasut <marex@denx.de>
Acked-by: Chin Liang See <clsee@altera.com>
2015-10-23 07:37:03 +08:00
Thomas Chou
220e8021af nios2: convert altera_jtag_uart to driver model
Convert altera_jtag_uart to driver model.

Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
Acked-by: Marek Vasut <marex@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
2015-10-23 07:36:37 +08:00
Thomas Chou
37e24499b9 nios2: map physical address to uncached virtual address
Add ioremap() to map physical address to uncached virtual
address. We need this to convert the reg address from the
device tree.

The order of headers inclusion in interrupts.c is changed
because common.h will include board header that contains
IO_REGION_BASE.

In the future, the IO_REGION_BASE should be decided from
the device tree.
tree

Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
Acked-by: Marek Vasut <marex@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
2015-10-23 07:29:11 +08:00
Thomas Chou
3e468e6896 nios2: call board_init_f_mem
We will need CONFIG_SYS_MALLOC_F_LEN to use serial uclass.
So we shall undefine CONFIG_SYS_GENERIC_GLOBAL_DATA, and
call board_init_f_mem() to allocates early malloc() memory
with size of CONFIG_SYS_MALLOC_F_LEN in board_f.c.

Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
Reviewed-by: Marek Vasut <marex@denx.de>
2015-10-23 07:28:50 +08:00
Thomas Chou
34243804d6 nios2: zap version_string
There is a weak version_string[] at common/cmd_version.c .
Remove the one in start.S.

Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
Acked-by: Marek Vasut <marex@denx.de>
2015-10-23 07:28:50 +08:00
Thomas Chou
651389a055 nios2: zap dly_clks
The dly_clks() in start.S is no use after switching to
generic timer. Remove it.

Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
Acked-by: Marek Vasut <marex@denx.de>
2015-10-23 07:28:50 +08:00
Thomas Chou
e6500f86a6 nios2: Split timer code into timer.c
Move the timer code from interrupts.c into timer.c . Eliminate the
installation of timer interrupt handler, which is no longer used.

Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
2015-10-23 07:28:50 +08:00
Thomas Chou
fea7f3aa3e nios2: Switch to generic timer
Zap almost all of the ad-hoc timer code from interrupts.c and
use the code in lib/time.c instead.

Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
2015-10-23 07:28:50 +08:00
Thomas Chou
e6e2c15d48 nios2: enable device tree control of U-Boot
This patch adds device tree control of U-Boot to nios2 boards.
The example dts is taken from Linux kernel.

Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
Reviewed-by: Simon Glass <sjg@chromium.org>
Acked-by: Marek Vasut <marex@denx.de>
2015-10-23 07:28:38 +08:00
Thomas Chou
1226dfdadd nios2: define _end in link script
Since commit 44c6e6591c
"rename _end to __bss_end__" , the _end was removed.
But we need it now for separated device tree control,
ie, CONFIG_OF_SEPARATE .

The _end is used by fdtdec_setup() to find the blob.

Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
Acked-by: Marek Vasut <marex@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
2015-10-23 07:28:38 +08:00
Thomas Chou
355483e102 nios2: remove gp assignments in link script
Since we don't use gp for small data with option "-G0",
we use gp as global data pointer. The _gp location is
not needed.

The ALIGN(16) was for gp only. It is removed, so that we
can get correct address of dtb in u-boot-dtb.bin image.

Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
Reviewed-by: Simon Glass <sjg@chromium.org>
Acked-by: Marek Vasut <marex@denx.de>
2015-10-23 07:28:38 +08:00
Thomas Chou
e900298ea4 nios2: enlarge the code relocation range
As we will use u-boot-dtb.bin, the code relocation range
should be adjusted to accommodate the additional dtb.
It might be overkilled to look into dtb header to find the
dtb size, so we will simply use CONFIG_SYS_MONITOR_LEN.

Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
2015-10-23 07:28:38 +08:00
Thomas Chou
4192b8c358 nios2: BSS should be cleared only after board_init_f
As dtb in u-boot-dtb.bin overlapped the BSS section,
we should delay the clearing of BSS until dtb is relocated
in board_init_f().

Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
Acked-by: Marek Vasut <marex@denx.de>
2015-10-23 07:28:37 +08:00
Thomas Chou
a03377b62f nios2: permit device tree control of U-Boot
Enable this in the Kconfig so that nios2 boards can use device
tree to configure U-Boot.

Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
Reviewed-by: Simon Glass <sjg@chromium.org>
Acked-by: Marek Vasut <marex@denx.de>
2015-10-23 07:28:37 +08:00
Mugunthan V N
eae7ae1853 am437x: Add am57xx_evm_defconfig using CONFIG_DM
Import various DT files for am57xx-beagle-x15 from
Linux Kernel v4.2
Add config file for this board, enable DM, DM_GPIO,
DM_SERIAL and DM_MMC.

Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
2015-10-22 14:44:02 -04:00
Mugunthan V N
7a837bcf12 am437x: Add am437x_sk_evm_defconfig using CONFIG_DM
Import various DT files for am437x-sk-evm from Linux Kernel v4.2
Add config file for this board, enable DM, DM_GPIO, DM_SERIAL
and DM_MMC.

Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
2015-10-22 14:44:01 -04:00
Mugunthan V N
48038c4acb am437x: Add am437x_gp_evm_defconfig using CONFIG_DM
Import various DT files for am4372, an43xx pinctrl and
am437x-gp-evm from Linux Kernel v4.2
Add config file for this board, enable DM, DM_GPIO, DM_SERIAL
and DM_MMC.

Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
2015-10-22 14:44:00 -04:00
Mugunthan V N
11e1582506 omap_hsmmc: update struct hsmmc to accomodate base address from DT
Existing driver gets the actual omap hammc base address + 0x100
bytes as the first 0x100 bytes is not used by the driver. But
with DM conversion the base address from DT is different, to
accommodate the offset adding res0[0x100] to struct hsmmc.

Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2015-10-22 14:22:28 -04:00
Mugunthan V N
e5520e188b dra7xx: Add dra74_evm_defconfig using CONFIG_DM
Import various DT files for dra7-evm from Linux Kernel v4.2
Add config file for this board, enable DM and DM_GPIO

Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2015-10-22 14:22:28 -04:00
Lokesh Vutla
2a9a842ebe ARM: dts: k2g: Add DT support
Add basic DT support for k2g evm.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2015-10-22 14:22:26 -04:00
Roger Quadros
3b68939fa0 ARM: k2g: add SD card and eMMC support
Add MMC support for k2g

Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Tested-by: Mugunthan V N <mugunthanvnm@ti.com>
2015-10-22 14:22:25 -04:00
Vitaly Andrianov
4657a2d44e driver: net: keystone_net: add support for rgmii phy
In K2G, Ethernet doesn't support SGMII instead it support RGMII,
adding support to the driver to connect to RGMII phy.

Signed-off-by: Vitaly Andrianov <vitalya@ti.com>
Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2015-10-22 14:22:23 -04:00
Mugunthan V N
bf7bd4e725 driver: net: keystone_net: fix phy mode configuration
Phy mode is a board property and it can be different between
multiple board and ports, so it should not be hardcoded in
driver to one specific mode. So adding a field in eth_priv_t
structure to pass phy mode to driver.

Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2015-10-22 14:22:22 -04:00
Vitaly Andrianov
cddb330035 ARM: k2g: update keystone nav rx queue numbers
update K2G nav rx queue number

Signed-off-by: Vitaly Andrianov <vitalya@ti.com>
Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2015-10-22 14:22:21 -04:00
Vitaly Andrianov
11d8222a26 ARM: k2g: Correct base addresses
Coreect base addresses for SPI, Queue Manager, Ethernet, GPIO,
and MSMC segments.

Signed-off-by: Vitaly Andrianov <vitalya@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2015-10-22 14:22:20 -04:00
Vitaly Andrianov
5dd6af2ecb ARM: k2g: Add support for pin mux configuration
Add api for configuring pin mux.

Signed-off-by: Vitaly Andrianov <vitalya@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2015-10-22 14:22:19 -04:00
Vitaly Andrianov
235dd6e8d1 ARM: k2g: Add ddr3 info
Add ddr3 related info

Signed-off-by: Vitaly Andrianov <vitalya@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2015-10-22 14:22:18 -04:00