Commit Graph

794 Commits

Author SHA1 Message Date
Simon Glass
3bb4db4c38 tpm: Allow reporting the internal state
It is useful to read information about the current TPM state, where
supported, e.g. for debugging purposes when verified boot fails.

Add support for this to the TPM interface as well as Cr50. Add a simple
sandbox test.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
2022-09-03 16:59:05 +03:00
Simon Glass
21ddac140e dm: rtc: Try to handle the localtime() race
At present the sandbox timer uses localtime() which can jump around twice
a year when daylight-saving time changes.

It would be tricky to make use of gmtime() since we still need to present
the time in local time, as seems to be required by U-Boot's RTC interface.

The problem can only happen once, so use a loop to detect it and try
again. This should be sufficient to detect either a change in the 'second'
value, or a daylight-saving change. We can assume that the latter also
incorporates a 'second' change, so there is no need to loop more than
twice.

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-09-02 16:21:44 -04:00
Simon Glass
fc7ceae0d5 dm: rtc: Try to avoid a race in rtc_set_get test
It seems that the time can change in between getting it and reading the
offset. Check for this and try again if this happens.

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-09-02 16:21:44 -04:00
Simon Glass
c4d7247a38 dm: rtc: Avoid a race in the rtc_reset test
Since resetting the RTC on sandbox causes it to read the base time from
the system, we cannot rely on this being unchanged since it was last read.
Allow for a one-second delay.

Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Fixes: https://source.denx.de/u-boot/u-boot/-/issues/4
Reported-by: Bin Meng <bmeng.cn@gmail.com>
Reported-by: Tom Rini <trini@konsulko.com>
Suggested-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Signed-off-by: Simon Glass <sjg@chromium.org>
2022-09-02 16:21:44 -04:00
Simon Glass
ea94d053e1 test: Allow running tests multiple times
Some tests can have race conditions which are hard to detect on a single
one. Add a way to run tests more than once, to help with this.

Each individual test is run the requested number of times before moving
to the next test. If any runs failed, a message is shown.

This is most useful when running a single test, since running all tests
multiple times can take a while.

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-09-02 16:21:44 -04:00
Simon Glass
e033c180d0 dm: rtc: Make use of ut_assertnonnull()
Use this (newish) macro since it is designed for the purpose of making
sure things are non-NULL.

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-09-02 16:21:44 -04:00
Simon Glass
55f7990bfe dm: core: Add support for writing u32 with ofnode
Add a new function to write an integer to an ofnode (live tree or
flat tree).

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-08-12 08:14:24 -04:00
Simon Glass
39e42be12b dm: core: Allow writing to a flat tree with ofnode
In generally it is not permitted to implement an ofnode function only for
flat tree or live tree. Both must be supported. Also the code for
live tree access should be in of_access.c rather than ofnode.c which is
really just for holding the API-conversion code.

Update ofnode_write_prop() accordingly and fix the test so it can work
with flat tree too.

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-08-12 08:14:24 -04:00
Simon Glass
b7eaa4f5e5 dm: core: Tidy up ofnode-writing test
Update this test to use the livetree flag so that special check can be
avoided. Also drop a few blank lines.

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-08-12 08:14:24 -04:00
Simon Glass
be0789a8ee dm: core: Swap parameters of ofnode_write_prop()
It is normal for the length to come after the value in libfdt. Follow this
same convention with ofnode.

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-08-12 08:14:24 -04:00
Simon Glass
6571559449 dm: core: Move ofnode-writing test to ofnode
This fits better in the ofnode tests, so move it.

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-08-12 08:14:24 -04:00
Simon Glass
331048471d dm: core: Introduce support for multiple trees
At present ofnode only works with a single device tree, for the most part.
This is the control FDT used by U-Boot.

When booting an OS we may obtain a different device tree and want to
modify it. Add some initial support for this into the ofnode API.

Note that we don't permit aliases in this other device tree, since the
of_access implementation maintains a list of aliases collected at
start-up. Also, we don't need aliases to do fixups in the other FDT. So
make sure that flat tree and live tree processing are consistent in this
area.

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-08-12 08:14:23 -04:00
Sughosh Ganu
de70619dd3 test: rng: Add a UT testcase for the rng command
The 'rng' command dumps a number of random bytes on the console. Add a
set of tests for the 'rng' command. The test function performs basic
sanity testing of the command.

Since a unit test is being added for the command, enable it by default
in the sandbox platforms.

Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
2022-08-02 23:50:02 +03:00
Paul Doelle
1fc45d6483 watchdog: add pulse support to gpio watchdog driver
A common external watchdog circuit is kept alive by triggering a short
pulse on the reset pin. This patch adds support for this use case, while
making the algorithm configurable in the devicetree.

The "linux,wdt-gpio" driver being modified is based off the equivalent
driver in the Linux kernel, which provides support for this algorithm.
This patch brings parity to this driver, and is kept aligned with
the functionality and devicetree configuration in the kernel.

It should be noted that this adds a required property named 'hw_algo'
to the devicetree binding, following suit with the kernel. I'm happy to
make this backward-compatible if preferred.

Signed-off-by: Paul Doelle <paaull.git@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>
2022-07-21 08:09:06 +02:00
Tom Rini
9ff4ce8abc nman external-symbol improvements
Driver model memory-usage reporting
 patman test-reporting improvements
 Add bloblist design goals
 -----BEGIN PGP SIGNATURE-----
 
 iQFFBAABCgAvFiEEslwAIq+Gp8wWVbYnfxc6PpAIreYFAmK7BHwRHHNqZ0BjaHJv
 bWl1bS5vcmcACgkQfxc6PpAIrealpwgAlCLCdEiSncV0t+Q9zvdtAQStvZdjD6CW
 VhpCS38pWUA0ckKYq/gmmlE2nW6i7pb4RdiOkpOhKdwFQI7SwbF2GdcU2yv08PMm
 qWHTRDaTm0SiGXUU462+A1Bj/aXPH86uEE9bCYu1FYtRrEtNf6aAeWF3pqNJv4fy
 CFB9OYyAfMEdywCtW2dCjS4y1FiI95Y2Jvg7lPGLVayHDyuavLSMKC8QEsVS4mR0
 91nNLhs6agko/H2i0QXle1lLjkvTIH3VR6dn/CMVjD+goJdDCk7rltHRXHejGun4
 n+a1W3EVv2sSQLwQJ0Kw5e2eBKdlM6Lpzhc0b0iJ2jKzBZeLXS+qBg==
 =2LZO
 -----END PGP SIGNATURE-----

Merge tag 'dm-pull-28jun22' of https://source.denx.de/u-boot/custodians/u-boot-dm into next

nman external-symbol improvements
Driver model memory-usage reporting
patman test-reporting improvements
Add bloblist design goals
2022-07-08 14:39:07 -04:00
Heinrich Schuchardt
ebaa3d053e test: fix CONFIG_ACPIGEN dependencies
Some tests cannot be built with CONFIG_ACPIGEN=n. Consider this in the
Makefile.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2022-07-08 09:05:47 -04:00
Simon Glass
0dfda34ca5 dm: core: Add a way to collect memory usage
Add a function for collecting the amount of memory used by driver model,
including devices, uclasses and attached data and tags.

This information can provide insights into how to reduce the memory
required by driver model. Future work may look at execution speed also.

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-06-28 03:09:52 +01:00
Simon Glass
930a3ddade dm: core: Support accessing core tags
At present tag numbers are only allocated for non-core data, meaning that
the 'core' data, like priv and plat, are accessed through dedicated
functions.

For debugging and consistency it is convenient to use tags for this 'core'
data too. Add support for this, with new tag numbers and functions to
access the pointer and size for each.

Update one of the test drivers so that the uclass-private data can be
tested here.

There is some code duplication with functions like device_alloc_priv() but
this is not addressed for now. At some point, some rationalisation may
help to reduce code size, but more thought it needed on that.

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-06-28 03:09:52 +01:00
Sean Anderson
df33fd2889 test: eth: Add test for ethernet addresses
This adds a test to make sure that all the ethernet interfaces have
their addresses read properly. At the moment everything is read from the
environment, but the next few commits will add additional sources.

Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-06-08 13:59:52 -04:00
Sean Anderson
bedb182e32 sandbox: net: Add aliases for ethernet devices
Commit f3dd213e15 ("net: introduce helpers to get PHY ofnode from MAC")
changed the ethernet sequence assignment from

uclass 36: ethernet
0   * eth@10002000 @ 05813460, seq 0
1   * eth@10003000 @ 05813550, seq 5
2   * sbe5 @ 05813640, seq 3
3   * eth@10004000 @ 05813730, seq 6
4   * dsa-test-eth @ 05813820, seq 4
5   * lan0 @ 05813a30, seq 2
6   * lan1 @ 05813b50, seq 7

to

uclass 36: ethernet
0   * eth@10002000 @ 03813630, seq 0
1   * eth@10003000 @ 03813720, seq 5
2   * sbe5 @ 03813810, seq 3
3   * eth@10004000 @ 03813900, seq 6
4     phy-test-eth @ 038139f0, seq 7
5   * dsa-test-eth @ 03813ae0, seq 4
6   * lan0 @ 03813cf0, seq 2
7   * lan1 @ 03813e10, seq 8

This caused the mac address assignment to switch around. Avoid this in
the future by assigning aliases for all ethernet devices. This reverts
the sequence to what it was before the aformentioned commit (with
phy-test-eth as seq 8). There is no ethernet1 for whatever reason.

Signed-off-by: Sean Anderson <sean.anderson@seco.com>
2022-06-08 13:59:52 -04:00
Andrew Scull
d036104a02 test: dm: virtio_rng: Test virtio-rng with faked device
Add a regression test for virtio-rng reading beyond the end of its
buffer if the virtio device provides an invalid length.

Signed-off-by: Andrew Scull <ascull@google.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-06-08 09:24:04 -04:00
Andrew Scull
420b3e51f4 test: dm: virtio: Test virtio device driver probing
Once the virtio-rng driver has been bound, probe it to trigger the pre
and post child probe hooks of the virtio uclass driver. Check the status
of the virtio device to confirm it reached the expected state.

Signed-off-by: Andrew Scull <ascull@google.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-06-08 09:24:04 -04:00
Andrew Scull
acd3b27a65 virtio: sandbox: Bind RNG rather than block device
The virtio-rng driver is extremely simple, making it suitable for
testing more of the virtio uclass logic. Have the sandbox driver bind
the virtio-rng driver rather than the virtio-blk driver so it can be
used in tests.

Signed-off-by: Andrew Scull <ascull@google.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-06-08 09:24:04 -04:00
Andrew Scull
8df508ff3d test: dm: virtio: Split out virtio device tests
Virtio tests that find a child device require the virtio device driver
to be included in the build so it can probe. The sandbox virtio
transport driver currently reports a virtio-blk device so make sure the
corresponding driver is built before running tests that need it.

Signed-off-by: Andrew Scull <ascull@google.com>
2022-06-08 09:24:04 -04:00
Andrew Scull
82c8610a44 test: dm: virtio: Test notify before del_vqs
The virtqueue is passed to virtio_notify() so move the virtqueue
deletion to the end of the test when it's no longer needed. This wasn't
causing any problems because the sandbox virtio transport driver doesn't
do anything for notifications, but it could cause problems if things
change and it was a bad example.

Signed-off-by: Andrew Scull <ascull@google.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-06-08 09:24:04 -04:00
Andrew Scull
1674b6c4d8 virtio: sandbox: Fix device features bitfield
The virtio sandbox transport was setting the device features value to
the bit index rather than shifting a bit to the right index. Fix this
using the bit manipulation macros.

Signed-off-by: Andrew Scull <ascull@google.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-06-08 09:24:03 -04:00
Andrew Scull
b1fe820b63 dm: test: virtio: Test the virtio ring
The virtio ring is the basis of virtio communication. Test its basic
functionality and its resilience against corruption from the device.

Signed-off-by: Andrew Scull <ascull@google.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-06-08 09:24:03 -04:00
Patrice Chotard
012afa83ae test: dm: spi: Replace _spi_get_bus_and_cs() by spi_get_bus_and_cs() in some case
In case _spi_get_bus_and_cs()'s parameters drv_name and dev_name are
respectively set to NULL and 0, use spi_get_bus_and_cs() instead.

Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>

Cc: Marek Behun <marek.behun@nic.cz>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Vignesh R <vigneshr@ti.com>
Cc: Joe Hershberger <joe.hershberger@ni.com>
Cc: Ramon Fried <rfried.dev@gmail.com>
Cc: Lukasz Majewski <lukma@denx.de>
Cc: Marek Vasut <marex@denx.de>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Simon Glass <sjg@chromium.org>
Cc: Stefan Roese <sr@denx.de>
Cc: "Pali Rohár" <pali@kernel.org>
Cc: Konstantin Porotchkin <kostap@marvell.com>
Cc: Igal Liberman <igall@marvell.com>
Cc: Bin Meng <bmeng.cn@gmail.com>
Cc: Pratyush Yadav <p.yadav@ti.com>
Cc: Sean Anderson <seanga2@gmail.com>
Cc: Anji J <anji.jagarlmudi@nxp.com>
Cc: Biwen Li <biwen.li@nxp.com>
Cc: Priyanka Jain <priyanka.jain@nxp.com>
Cc: Chaitanya Sakinam <chaitanya.sakinam@nxp.com>
2022-05-23 09:33:10 -04:00
Patrice Chotard
61708bb0a2 spi: spi-uclass: Add new spi_get_bus_and_cs() implementation
Move legacy spi_get_bus_and_cs() code to _spi_get_bus_and_cs().

Add new spi_get_bus_and_cs() implementation which rely on DT
for speed and mode and don't need any drv_name nor dev_name
parameters. This will prepare the ground for next patch.

Update all callers to use _spi_get_bus_and_cs() to keep the
same behavior.

Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>

Cc: Marek Behun <marek.behun@nic.cz>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Vignesh R <vigneshr@ti.com>
Cc: Joe Hershberger <joe.hershberger@ni.com>
Cc: Ramon Fried <rfried.dev@gmail.com>
Cc: Lukasz Majewski <lukma@denx.de>
Cc: Marek Vasut <marex@denx.de>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Simon Glass <sjg@chromium.org>
Cc: Stefan Roese <sr@denx.de>
Cc: "Pali Rohár" <pali@kernel.org>
Cc: Konstantin Porotchkin <kostap@marvell.com>
Cc: Igal Liberman <igall@marvell.com>
Cc: Bin Meng <bmeng.cn@gmail.com>
Cc: Pratyush Yadav <p.yadav@ti.com>
Cc: Sean Anderson <seanga2@gmail.com>
Cc: Anji J <anji.jagarlmudi@nxp.com>
Cc: Biwen Li <biwen.li@nxp.com>
Cc: Priyanka Jain <priyanka.jain@nxp.com>
Cc: Chaitanya Sakinam <chaitanya.sakinam@nxp.com>
2022-05-23 09:33:10 -04:00
Andrew Scull
2635e3b50f pci: Add mask parameter to dm_pci_map_bar()
Add a mask parameter to control the lookup of the PCI region from which
the mapping can be made.

Signed-off-by: Andrew Scull <ascull@google.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2022-05-03 18:33:29 -04:00
Andrew Scull
7739d93d82 pci: Match region flags using a mask
When converting addresses, apply a mask to the region flags during
lookup. This allows the caller to specify which flags are important and
which are not, for example to exclude system memory regions.

The behaviour of the function is changed such that they don't
preferentially search for a non-system memory region. However, system
memory regions are added after other regions in decode_regions() leading
to a similar outcome.

Signed-off-by: Andrew Scull <ascull@google.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2022-05-03 18:33:26 -04:00
Andrew Scull
12507a2d22 pci: Map bars with offset and length
Evolve dm_pci_map_bar() to include an offset and length parameter. These
allow a portion of the memory to be mapped and range checks to be
applied.

Passing both the offset and length as zero results in the previous
behaviour and this is used to migrate the previous callers.

Signed-off-by: Andrew Scull <ascull@google.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2022-05-03 15:50:46 -04:00
Andrew Scull
55e6adbd78 test: pci: Test PCI address conversion functions
Add tests for the functions dm_pci_bus_to_phys() and
dm_pci_phys_to_bus() which convert between PCI bus addresses and
physical addresses based on the ranges declared for the PCI controller.

The ranges of bus#1 are used for the tests, adding a translation to one
of the ranges to cover more cases.

Signed-off-by: Andrew Scull <ascull@google.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2022-05-03 15:50:46 -04:00
Andrew Scull
d69616e529 test: dm: devres: Remove use-after-free
Use-after-free shouldn't be used, even in tests. It's bad practice and
makes the test brittle.

Signed-off-by: Andrew Scull <ascull@google.com>
Cc: Simon Glass <sjg@chromium.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-04-29 11:11:36 -04:00
Andrew Scull
7f58feae3f test: Fix pointer overrun in dm_test_devm_regmap()
This tests calls regmap_read() which takes a uint pointer as an output
parameter. The test was passing a pointer to a u16 which resulted in an
overflow when the output was written. Fix this by following the
regmap_read() API and passing a uint pointer instead.

Signed-off-by: Andrew Scull <ascull@google.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>
Cc: Jean-Jacques Hiblot <jjhiblot@ti.com>
Cc: Pratyush Yadav <p.yadav@ti.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-04-29 11:11:36 -04:00
Marek Vasut
876276f5de test: dm: led: Fix LED enumeration
The GPIO LED driver no longer considers the top level node an LED,
because it is not an LED. With this bug fixed, the LED enumeration
has changed. Update the test accordingly.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Patrice Chotard <patrice.chotard@foss.st.com>
Cc: Patrick Delaunay <patrick.delaunay@foss.st.com>
Cc: Sean Anderson <seanga2@gmail.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Steven Lawrance <steven.lawrance@softathome.com>
2022-04-28 09:26:44 -04:00
Marek Vasut
69245e406e led: Drop led_default_state()
This function is empty, drop it.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Patrice Chotard <patrice.chotard@foss.st.com>
Cc: Patrick Delaunay <patrick.delaunay@foss.st.com>
Cc: Sean Anderson <seanga2@gmail.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Steven Lawrance <steven.lawrance@softathome.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2022-04-28 09:26:44 -04:00
Tom Rini
8cfac237b9 Merge branch '2022-04-25-initial-implementation-of-stdboot'
To quote the author:
The bootflow feature provide a built-in way for U-Boot to automatically
boot an Operating System without custom scripting and other customisation.
This is called 'standard boot' since it provides a standard way for
U-Boot to boot a distro, without scripting.

It introduces the following concepts:

   - bootdev - a device which can hold a distro
   - bootmeth - a method to scan a bootdev to find bootflows (owned by
                U-Boot)
   - bootflow - a description of how to boot (owned by the distro)

This series provides an implementation of these, enabled to scan for
bootflows from MMC, USB and Ethernet. It supports the existing distro
boot as well as the EFI loader flow (bootefi/bootmgr). It works
similiarly to the existing script-based approach, but is native to
U-Boot.

With this we can boot on a Raspberry Pi 3 with just one command:

   bootflow scan -lb

which means to scan, listing (-l) each bootflow and trying to boot each
one (-b). The final patch shows this.

With a standard way to identify boot devices, booting become easier. It
also should be possible to support U-Boot scripts, for backwards
compatibility only.

...

The design is described in these two documents:

https://drive.google.com/file/d/1ggW0KJpUOR__vBkj3l61L2dav4ZkNC12/view?usp=sharing

https://drive.google.com/file/d/1kTrflO9vvGlKp-ZH_jlgb9TY3WYG6FF9/view?usp=sharing
2022-04-25 16:02:27 -04:00
Simon Glass
026e2136f8 test: dm: Restart USB before assuming it is stopped
Update the blk test to stop USB first, in case another test has started
it.

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-04-25 10:00:03 -04:00
Simon Glass
9bd2f62d12 test: fastboot: Avoid using mmc1
The bootflow tests need to use an MMC with an associated backing file
containing a filesystem. Update the fastboot tests to cope with this.

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-04-25 10:00:03 -04:00
Simon Glass
4e0710a2d0 dm: core: Allow finding a uclass device by partial name
In some cases two devices are related and the only way to tell is to
check that the names partially patch. Add a way to check this without
needing to create a new string for the comparison.

Fix the comment for device_find_child_by_namelen() while we are here.

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-04-25 10:00:03 -04:00
Simon Glass
6aa4fe3912 dm: core: Rename and fix uclass_get_by_name_len()
It seems that namelen is more common in U-Boot. Rename this function to
fit in better. Also fix a bug where it breaks the operation of
uclass_get_by_name() and add a test.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reported-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reported-by: Tim Harvey <tharvey@gateworks.com>
2022-04-25 10:00:03 -04:00
AKASHI Takahiro
8ff50227be test: dm: add tests for tag support
The new test covers all tag-related interfaces.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-04-23 22:05:34 +02:00
Simon Glass
092d5c2a83 dm: core: Allow devres to be disabled in SPL
At present if devres is enabled in U-Boot proper it is enabled in SPL.
We don't normally want it there, so disable it.

Signed-off-by: Simon Glass <sjg@chromium.org>
Tested-by: Angus Ainslie <angus@akkea.ca>
2022-04-18 17:53:56 -04:00
Tom Rini
7f418ea598 Merge branch 'next' of https://source.denx.de/u-boot/custodians/u-boot-net
- DM9000 DM support
- tftp server bug fix
- mdio ofnode support functions
- Various phy fixes and improvements.

[trini: Fixup merge conflicts in drivers/net/phy/ethernet_id.c
drivers/net/phy/phy.c include/phy.h]
2022-04-15 08:10:32 -04:00
Sean Anderson
679190c41a test: serial: Add test for putc/puts
This adds a test to ensure that puts is equivalent to putc called in a
loop. We don't verify the contents of the message to avoid having to
record console output a second time (though that could be added in the
future). The globals are initialized to non-zero values to avoid a
warning; in particular, the character count is off-by-one (but we always
make relative measurements).

Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-04-14 15:39:15 -04:00
Marek Behún
123ca114e0 net: introduce helpers to get PHY interface mode from a device/ofnode
Add helpers ofnode_read_phy_mode() and dev_read_phy_mode() to parse the
"phy-mode" / "phy-connection-type" property. Add corresponding UT test.

Use them treewide.

This allows us to inline the phy_get_interface_by_name() into
ofnode_read_phy_mode(), since the former is not used anymore.

Signed-off-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
Tested-by: Patrice Chotard <patrice.chotard@foss.st.com>
2022-04-10 08:44:12 +03:00
Marek Behún
1776a24bbb treewide: use dm_mdio_read/write/reset() wrappers
Use the new dm_mdio_read/write/reset() wrappers treewide, instead of
always getting and dereferencing MDIO operations structure pointer.

Signed-off-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
2022-04-10 08:44:12 +03:00
Marek Behún
f3dd213e15 net: introduce helpers to get PHY ofnode from MAC
Add helpers ofnode_get_phy_node() and dev_get_phy_node() and use it in
net/mdio-uclass.c function dm_eth_connect_phy_handle(). Also add
corresponding UT test.

This is useful because other part's of U-Boot may want to get PHY ofnode
without connecting a PHY.

Signed-off-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-04-10 08:44:12 +03:00
Simon Glass
49e8668181 dm: blk: Expand iteration and add tests
Add some functions which support iteration before probing. Also add tests
for the functions.

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-04-06 14:03:17 -04:00
Tom Rini
34d2b7f203 Prepare v2022.04-rc5
-----BEGIN PGP SIGNATURE-----
 
 iQGzBAABCgAdFiEEGjx/cOCPqxcHgJu/FHw5/5Y0tywFAmJBxXQACgkQFHw5/5Y0
 tywKKAv+L+sCmqfJ4Zy2cdzWkGZI3NZMWi8yzUUU37RH5I+3Blht+z6dMslm9gCB
 7/PwS5y7WH3l3wEdeXcw4FUCgNh3D8YyfCcVCsQ0Qxig49xwWz8Jn6t+haOWD6eW
 uXim+gSG+ceWTBrKf3InzXN5fHPIcF66r+k3opwAwIYKpT8p8CgM4ewshBCAsc6t
 6qSLf+A64JNv/y2DTS+sPDY68tnplbyRvrNb6YEazOF6b6SnSE2j+EH8RkIZ+2yT
 cTUhQ2o9JJIKnaG9MTqHB+XVe80oPB7bTWInFo2JxGn98XeS7CTCcnDZhLqWrvHF
 gBfcpEcVE2blVbg/Vo2x4rnU1dop44ch6pE9k5SPFJcPdlzdwFHHgGyfGi9LtD4K
 JAvaIQdz6ZEOQqShpCxcbL/g2/uoRaXFqC7E8IE+WdFMXGBQoZpqaoBMoefnyplk
 xrzqaQye38JgZDX0ku4cm4SMArAfr4sVHcdDlSlzY3y2KQ8Ead25irRvq7GoQ2Ad
 Odo9taQF
 =9g2Y
 -----END PGP SIGNATURE-----

Merge tag 'v2022.04-rc5' into next

Prepare v2022.04-rc5
2022-03-28 12:36:49 -04:00
Damien Le Moal
fd426b3106 k210: use the board vendor name rather than the marketing name
"kendryte" is the marketing name for the K210 RISC-V SoC produced by
Canaan Inc. Rather than "kendryte,k210", use the usual "canaan,k210"
vendor,SoC compatibility string format in the device tree files and
use the SoC name for file names.
With these changes, the device tree files are more in sync with the
Linux kernel DTS and drivers, making uboot device tree usable by the
kernel.

Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
2022-03-15 17:43:11 +08:00
Etienne Carriere
10d3e5d20b firmware: scmi: fix sandbox and related tests for clock discovery
Updates sandbox SCMI clock driver and tests since enabling CCF will
mandate clock discovery that is all exposed SCMI clocks shall be
discovered at initialization. For this reason, sandbox SCMI clock
driver must emulate all clocks exposed by SCMI server, not only those
effectively consumed by some other U-Boot devices.

Therefore the sandbox SCMI test driver exposes 3 clocks (IDs 0, 1 and 2)
and sandbox SCMI clock consumer driver gets 2 of them.

Cc: Simon Glass <sjg@chromium.org>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
2022-03-02 17:42:06 -05:00
Etienne Carriere
41d62e2f27 sandbox: scmi: test against a single scmi agent
As per DT bindings since Linux kernel v5.14, the device tree can define
only 1 SCMI agent node that is named scmi [1]. As a consequence, change
implementation of the SCMI driver test through sandbox architecture to
reflect that.

This change updates sandbox test DT and sandbox SCMI driver accordingly
since all these are impacted.

Cc: Simon Glass <sjg@chromium.org>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
2022-03-02 17:42:06 -05:00
Patrice Chotard
9876ae7db6 dm: Fix OF_BAD_ADDR definition
When OF_LIVE flag is enabled on a 64 bits platform, there is an
issue when dev_read_addr() is called and need to perform an address
translation using __of_translate_address().

In case of error, __of_translate_address() return's value is OF_BAD_ADDR
(wich is defined in include/dm/of.h to ((u64)-1) = 0xffffffffffffffff).
The return value of dev_read_addr() is often compared to FDT_ADDR_T_NONE
which is defined as (-1U) = 0xffffffff.
In this case the comparison is always false.

To fix this issue, define FDT_ADDR_T_NONE to (ulong)(-1) in case of
AARCH64. Update accordingly related tests.

Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-01-25 12:36:10 -07:00
Simon Glass
06f6f3d478 acpi: Tidy up the table list
At present this is really just a debugging aid, but it is a bit untidy.
Add proper columns so it is easier to read.

Sample output for coral:

    => acpi list
    Name      Base   Size  Detail
    ----  --------  -----  ------
    RSDP  79925000     24  v02 U-BOOT
    RSDT  79925030     48  v01 U-BOOT U-BOOTBL 20220101 INTL 0
    XSDT  799250e0     6c  v01 U-BOOT U-BOOTBL 20220101 INTL 0
    FACP  79929570     f4  v04 U-BOOT U-BOOTBL 20220101 INTL 1
    DSDT  79925280   32ea  v02 U-BOOT U-BOOTBL 20110725 INTL 20180105
    FACS  79925240     40
    MCFG  79929670     2c  v01 U-BOOT U-BOOTBL 20220101 INTL 0
    SPCR  799296a0     50  v02 U-BOOT U-BOOTBL 20220101 INTL 0
    TPM2  799296f0     4c  v04 U-BOOT U-BOOTBL 20220101 INTL 0
    APIC  79929740     6c  v02 U-BOOT U-BOOTBL 20220101 INTL 0
    SSDT  799297b0   1523  v02 U-BOOT U-BOOTBL 20220101 INTL 1
    NHLT  7992ace0    e60  v05 coral coral 3 INTL 0
    DBG2  7992db40     61  v00 U-BOOT U-BOOTBL 20220101 INTL 0
    HPET  7992dbb0     38  v01 U-BOOT U-BOOTBL 20220101 INTL 0

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-01-25 11:44:36 -07:00
Simon Glass
a924641632 acpi: Tidy up the item list
At present this is really just a debugging aid, but it is a bit untidy.
Add proper columns and display the type name instead of a number.

Sample output for coral:

   => acpi items
   Seq  Type       Addr  Size  Device/Writer
   ---  -----  --------  ----  -------------
     0  other  79925000    240  0base
     1  other  79925240     40  1facs
     2  dsdt   799252a4     58  board
     3  dsdt   799252fc     10  lpc
     4  other  79925280   32f0  3dsdt
     5  other  79928570   1000  4gnvs
     6  other  79929570    100  5fact
     7  other  79929670     30  5mcfg
     8  other  799296a0     50  5spcr
     9  other  799296f0     50  5tpm2
     a  other  79929740     70  5x86
     b  ssdt   799297d4     fe  maxim-codec
     c  ssdt   799298d2     28  i2c2@16,0
     d  ssdt   799298fa    270  da-codec
     e  ssdt   79929b6a     28  i2c2@16,1
     f  ssdt   79929b92     28  i2c2@16,2
    10  ssdt   79929bba     83  tpm@50
    11  ssdt   79929c3d     28  i2c2@16,3
    12  ssdt   79929c65    282  elan-touchscreen@10
    13  ssdt   79929ee7    285  raydium-touchscreen@39
    14  ssdt   7992a16c     28  i2c2@17,0
    15  ssdt   7992a194     d8  elan-touchpad@15
    16  ssdt   7992a26c    163  synaptics-touchpad@2c
    17  ssdt   7992a3cf     28  i2c2@17,1
    18  ssdt   7992a3f7    111  wacom-digitizer@9
    19  ssdt   7992a508     8f  sdmmc@1b,0
    1a  ssdt   7992a597     4b  wifi
    1b  ssdt   7992a5e2    1a0  cpu@0
    1c  ssdt   7992a782    1a0  cpu@1
    1d  ssdt   7992a922    1a0  cpu@2
    1e  ssdt   7992aac2    211  cpu@3
    1f  other  799297b0   1530  6ssdt
    20  other  7992ace0   2f10  8dev

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-01-25 11:44:36 -07:00
Simon Glass
94ba15a3f1 x86: Move base tables to a writer function
Use the new ACPI writer to write the base tables at the start of the area,
moving this code from the x86 implementation.

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-01-25 11:44:36 -07:00
Simon Glass
31c27eb830 x86: Use the ACPI table writer
Use the new ACPI writer to write the ACPI tables. At present this is all
done in one monolithic function. Future work will split this out.

Unfortunately the QFW write_acpi_tables() function conflicts with the
'writer' version, so disable that for sandbox.

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-01-25 11:44:36 -07:00
Simon Glass
cc1f8c3988 x86: acpi: Split out context creation from base tables
At present acpi_setup_base_tables() both sets up the ACPI context and
writes out the base tables.

We want to use an ACPI writer to write the base tables, so split this
function into two, with acpi_setup_ctx() doing the context set, and
acpi_setup_base_tables() just doing the base tables.

Disable the writer's write_acpi_tables() function for now, to avoid
build errors. It is enabled in a following patch.

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-01-25 11:44:36 -07:00
Simon Glass
233f0e35a3 x86: Move the acpi table to generic global_data
Allow this to be used on any arch. Also convert to using macros so that
we can check the CONFIG option in C code.

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-01-25 11:44:36 -07:00
Heinrich Schuchardt
185f812c41 doc: replace @return by Return:
Sphinx expects Return: and not @return to indicate a return value.

find . -name '*.c' -exec \
sed -i 's/^\(\s\)\*\(\s*\)@return\(\s\)/\1*\2Return:\3/' {} \;

find . -name '*.h' -exec \
sed -i 's/^\(\s\)\*\(\s*\)@return\(\s\)/\1*\2Return:\3/' {} \;

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2022-01-19 18:11:34 +01:00
Alper Nebi Yasak
226fce6108 phy: Track power-on and init counts in uclass
On boards using the RK3399 SoC, the USB OHCI and EHCI controllers share
the same PHY device instance. While these controllers are being stopped
they both attempt to power-off and deinitialize it, but trying to
power-off the deinitialized PHY device results in a hang. This usually
happens just before booting an OS, and can be explicitly triggered by
running "usb start; usb stop" in the U-Boot shell.

Implement a uclass-wide counting mechanism for PHY initialization and
power state change requests, so that we don't power-off/deinitialize a
PHY instance until all of its users want it done. The Allwinner A10 USB
PHY driver does this counting in-driver, remove those parts in favour of
this in-uclass implementation.

The sandbox PHY operations test needs some changes since the uclass will
no longer call into the drivers for actions matching its tracked state
(e.g. powering-off a powered-off PHY). Update that test, and add a new
one which simulates multiple users of a single PHY.

The major complication here is that PHY handles aren't deduplicated per
instance, so the obvious idea of putting the counts in the PHY handles
don't immediately work. It seems possible to bind a child udevice per
PHY instance to the PHY provider and deduplicate the handles in each
child's uclass-private areas, like in the CLK framework. An alternative
approach could be to use those bound child udevices themselves as the
PHY handles. Instead, to avoid the architectural changes those would
require, this patch solves things by dynamically allocating a list of
structs (one per instance) in the provider's uclass-private area.

Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Peter Robinson <pbrobinson@gmail.com> - Rock960
2022-01-14 14:36:57 -05:00
Simon Glass
84e63abfff video: Support showing the U-Boot logo
Show the U-Boot logo by default. This is only 7KB in size so seems like
a useful default for boards that enable a display.

If SPLASH_SCREEN is enabled, it is not enabled by default, so as not to
conflict with that feature.

Also disable it for tests, since we don't want to complicate the output.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-12-26 23:32:46 +01:00
Simon Glass
4ea1548210 video: theadorable: Use RGB565 for BMP blitting
At present this uses RGB555 format for blitting to a display. Sandbox uses
565 and that seems to be more normal for BMP as well. Update the code
accordingly and add a test.

Note that this likely breaks the theadorable board so we may need to
discuss supporting both formats.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-12-26 23:23:52 +01:00
Simon Glass
c1cad06f69 video: Add a test for 16bpp BMP files
Add a compressed 16bpp BMP file and a test to cover this.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-12-26 23:05:42 +01:00
Simon Glass
646e169aa0 video: bmp: Update RLE8 support to use the write function
Update this code to use write_pix8() rather than writing the pixels only
for a single supported display depth. This allows us to support any
depth.

Add some more tests too.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-12-26 23:02:19 +01:00
Simon Glass
8657ad43f3 sandbox: video: Add BMP tests for 32bpp and 8bpp modes
Add a few more tests for BMP rendering. Use a back door into the sandbox
SDL driver to adjust the resolution at runtime.

The truetype code does not support 8bpp. Add this so that the display is
not blank when running in this mode.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-12-26 23:02:19 +01:00
Simon Glass
6476c4d981 dm: core: Allow getting some basic stats
Add a function that returns some basic stats about driver model. For now
we only have two.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-12-23 10:24:40 -05:00
Tom Rini
4afab30cae Prepare v2022.01-rc4
-----BEGIN PGP SIGNATURE-----
 
 iQGzBAABCgAdFiEEGjx/cOCPqxcHgJu/FHw5/5Y0tywFAmHArDwACgkQFHw5/5Y0
 tyzxyAv/SjZjoEwG8nu7ptVZqTsZfm+tVwwWmQEBAA40MXy/KSccDtbUwB5GCO6f
 Uvk+qFFDbCkbGZh5VKbQusMmUoB02Xu9zUoSxKxcXL4WfC6Bg5GV/UWN9s8G3Tm6
 4wcP0l8WFcQjjr89UfXugiZH58psvFu6PBbWVY4rMH9gZ5ds0AkNOF0L+HbdVmMR
 a5HBfrcySRY2kiTQuKF+RVlMW6BtaOqJp/XIyy8w6bH09ykMomj/u7z3JP3y9ZzL
 w3FXqCLlIEnvdDcqfWvfjoJ/gm0WcLulgSVpTFGS0jgJpnbeAURtZcuVgj6aPRUW
 FRon+u0tj3wpFjibs2cpyXWd+gw/bLLFpDXx78AUAPjxG31tEKbnR1j8R8wBZJ0B
 TqWZ3pCne/LPOT90y2KW2z6ty2n/yEn6qEFFT9MN9R4L0N+U0er//sYJC/nn/e6u
 fjvQ9OPLbnAfHVrad3ZeIkePrLOIF6XYwNQpsjt9aE2kU9IvV5sTa8TxZuQgasBU
 A46FgXtC
 =MEG2
 -----END PGP SIGNATURE-----

Merge tag 'v2022.01-rc4' into next

Prepare v2022.01-rc4
2021-12-20 17:12:04 -05:00
Simon Glass
42b7f4212a efi: Add uclass for devices provided by UEFI firmware
UCLASS_EFI_LOADER is used for devices created by applications and
drivers loaded by U-Boots UEFI implementation.

This patch provides a new uclass (UCLASS_EFI_MEDIA) to be used for devices
that provided by a UEFI firmware calling U-Boot as an EFI application.

If the two uclasses can be unified, is left to future redesign.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2021-12-09 11:43:25 -08:00
Simon Glass
075bfc9575 dm: core: Add a way to obtain a string list
At present we support reading a string list a string at a time. Apart
from being inefficient, this makes it impossible to separate reading of
the devicetree into the of_to_plat() method where it belongs, since any
code which needs access to the string must read it from the devicetree.

Add a function which returns the string property as an array of pointers
to the strings, which is easily used by clients.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-11-28 16:51:51 -07:00
Simon Glass
fb933d070e dm: core: Add tests for stringlist functions
These functions currently lack tests so add some. The error handling
differs betwee livetree and flattree at present, so only check the error
codes with livetree.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-11-28 16:51:51 -07:00
Heinrich Schuchardt
ace5bb3eca test/dm: fix watchdog test
For successful execution of the watchdog test we need both the GPIO as well
as the SANDBOX watchdog.

Avoid a build failure for CONFIG_WDT_GPIO=n.

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2021-11-13 08:16:52 -07:00
Michael Walle
bce039acf2 test: dm: add test for ofnode_for_each_compatible_node()
Check that all matching nodes have the correct compatible and that there
is at least one match.

Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-11-09 17:18:23 +05:30
Mark Kettenis
fb57462437 test: Add tests for IOMMU uclass
Add a set of tests for the IOMMU uclass.

Signed-off-by: Mark Kettenis <kettenis@openbsd.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
2021-10-31 08:46:44 -04:00
Thierry Reding
b9aad37591 fdtdec: Support reserved-memory flags
Reserved memory nodes can have additional flags. Support reading and
writing these flags to ensure that reserved memory nodes can be properly
parsed and emitted.

This converts support for the existing "no-map" flag to avoid extending
the argument list for fdtdec_add_reserved_memory() to excessive length.

Signed-off-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Warren <twarren@nvidia.com>
2021-10-13 14:18:30 -07:00
Thierry Reding
9019487608 fdtdec: Reorder fdtdec_set_carveout() parameters for consistency
The fdtdec_set_carveout() function's parameters are inconsistent with
the parameters passed to fdtdec_add_reserved_memory(). Fix up the order
to make it more consistent.

Signed-off-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Warren <twarren@nvidia.com>
2021-10-13 14:18:30 -07:00
Thierry Reding
46cb067803 fdtdec: Support compatible string list for reserved memory
Reserved memory nodes can have a compatible string list to identify the
type of reserved memory that they represent. Support specifying an
optional compatible string list when creating these nodes.

Signed-off-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Warren <twarren@nvidia.com>
2021-10-13 14:18:30 -07:00
Tom Rini
776bf6a545 - Disable ATAGS for STM32 MCU and MPU boards
- Disable bi_boot_params for STM32 MCU and MPU boards
 - Update stm32-usbphyc node management
 - Convert CONFIG_STM32_FLASH to Kconfig for STM32 MCU boards
 - Convert some USB config flags to Kconfig for various boards
 - Convert CONFIG_BOOTCOMMAND flag to Kconfig for STM32 F429 board
 - Remove specific CONFIG_STV0991 flags
 - Remove unused CONFIG_USER_LOWLEVEL_INIT flag
 - Add ofdata_to_platdata() callback for stm32_spi driver
 - Update for stm32f7_i2c driver
 - Remove gpio_hog_probe_all() from STM32 MP1 board
 - Fix bind command
 -----BEGIN PGP SIGNATURE-----
 
 iQJQBAABCgA6FiEEXyrViUccKBz9c35Jysd4L3sz/6YFAmFlgsIcHHBhdHJpY2Uu
 Y2hvdGFyZEBmb3NzLnN0LmNvbQAKCRDKx3gvezP/plnND/4q9HSlvddybIPjBHlW
 rXz1ISwj8JZPp7R4MJcB4RiHofYZzjTXx3dDYUif6oQMpCDp64KPfcUDW0kaq8U7
 ZFwJvt59boV1XWlonIXMb3gAkY6gFa5PnYAE/YXEqKvPPvUb7FkT7BWxm4LxCGsj
 mEmboR8u87s6e4ZP03HJsSVa5FnNwJUZU8b+58Vxp10YC0PPf7kpmgCucDhrghvY
 TORlk259KUFoZXz4J4My0VzDdxE05gDqq1m6Xw1CzqcUbGysMvjNEHlxGdYbWD/U
 maamP19DUmKUREmpj3kO/JZvacLJlQP/mdGJ0OWKNbIr/3ha4dYagxDoRodEVo0m
 DYaaVPGvG24G78d5meB2q9wT0aGdTyaqm+XRBQMvMN2LlaGmu9duA1t6yBuyMcFk
 BeA7d0eHMo1ezD9FFZMxwIOAWhJlcYQEAMFhUwkR1B322w0NU4nbl9KRCGuGV2Zp
 ZFQV4BoMvb0NwAdo66xwZ+gSq4Wp1y46VM6x2Mw52v2F4p3teeAqR906TdQVYO8+
 hlYChO9+qK4JO7LPX/5wQ4FIzcq1HnTzTpuOSf28hsemiPMu0OkAQv1J7DohNZix
 wELBA+ZIjGXksmDTPjpXg5CSvVALa/l2G816hp7/XTJ1XRBSz/pzjhp5rwm42zmw
 x7EPnwzpAlQCSqTQ0sgO+fgoRA==
 =S4kl
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-stm32-20211012' of https://source.denx.de/u-boot/custodians/u-boot-stm

- Disable ATAGS for STM32 MCU and MPU boards
- Disable bi_boot_params for STM32 MCU and MPU boards
- Update stm32-usbphyc node management
- Convert CONFIG_STM32_FLASH to Kconfig for STM32 MCU boards
- Convert some USB config flags to Kconfig for various boards
- Convert CONFIG_BOOTCOMMAND flag to Kconfig for STM32 F429 board
- Remove specific CONFIG_STV0991 flags
- Remove unused CONFIG_USER_LOWLEVEL_INIT flag
- Add ofdata_to_platdata() callback for stm32_spi driver
- Update for stm32f7_i2c driver
- Remove gpio_hog_probe_all() from STM32 MP1 board
- Fix bind command

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-10-12 12:01:00 -04:00
Patrice Chotard
38f7d3b653 cmd: bind: Fix driver binding on a device
Fix a regression brings by commit 84f8e36f03 ("cmd: bind: allow to
bind driver with driver data")

As example, the following bind command doesn't work:

   bind /soc/usb-otg@49000000 usb_ether

As usb_ether driver has no compatible string, it can't be find by
lists_bind_fdt(). In bind_by_node_path(), which called lists_bind_fdt(),
the driver entry is known, pass it to lists_bind_fdt() to force the driver
entry selection.

For this, add a new parameter struct *driver to lists_bind_fdt().
Fix also all lists_bind_fdt() callers.

Fixes: 84f8e36f03 ("cmd: bind: allow to bind driver with driver data")
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Reported-by: Herbert Poetzl <herbert@13thfloor.at>
Cc: Marek Vasut <marex@denx.de>
Cc: Herbert Poetzl <herbert@13thfloor.at>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2021-10-12 14:19:52 +02:00
Sean Anderson
425c08faa8 clk: k210: Try harder to get the best config
In some cases, the best config cannot be used because the VCO would be
out-of-spec. In these cases, we may need to try a worse combination of r/od
in order to find the best representable config. This also adds a few test
cases to catch this and other (possible) unlikely errors.

Signed-off-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2021-10-07 16:08:23 +08:00
Sean Anderson
6e23c9f0c1 test: dm: k210: Reduce duplication in test cases
Having to copy-paste the same 3 lines makes adding new test cases
error-prone. Use a macro.

Signed-off-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
2021-10-07 16:08:23 +08:00
Pali Rohár
a3423b3f23 acpi: Use U-Boot version for OEM_REVISION
OEM_REVISION is 32-bit unsigned number. It should be increased only when
changing software version. Therefore it should not depend on build time.

Change calculation to use U-Boot version numbers and set this revision
to date number.

Prior this change OEM_REVISION was calculated from build date and stored in
the same format.

After this change macro U_BOOT_BUILD_DATE is not used in other files so
remove it from global autogenerated files and also from Makefile.

Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
2021-10-06 09:15:14 -04:00
Wolfgang Denk
66356b4c06 WS cleanup: remove trailing empty lines
Signed-off-by: Wolfgang Denk <wd@denx.de>
2021-09-30 08:08:56 -04:00
Tom Rini
6eecaf5d0f Merge branch 'network_master' of https://source.denx.de/u-boot/custodians/u-boot-net into next
- Fix some non-NULL terminated strings in the networking subsystem
- net: tsec: Mark tsec_get_interface as __maybe_unused
2021-09-29 07:58:20 -04:00
Vladimir Oltean
66fd01fe59 net: update NXP copyright text
NXP Legal insists that the following are not fine:

- Saying "NXP Semiconductors" instead of "NXP", since the company's
  registered name is "NXP"

- Putting a "(c)" sign in the copyright string

- Putting a comma in the copyright string

The only accepted copyright string format is "Copyright <year-range> NXP".

This patch changes the copyright headers in the networking files that
were sent by me, or derived from code sent by me.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2021-09-28 18:50:56 +03:00
Heinrich Schuchardt
8ae8da10b3 sandbox: correct cpu nodes
The cpu nodes in arch/sandbox/dts/test.dts should conform to the devicetree
specification:

* property device_type must be set to "cpu"
* the reg property must be provided
* the cpu nodes must have an address

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
2021-09-25 09:46:15 -06:00
Simon Glass
48609d0789 dm: gpio: Add of-platdata support
Add support for accessing GPIOs using of-plata. This uses the same
mechanism as for clocks, but allows use of the xlate() method so that
the driver can interpret the parameters.

Update the condition for GPIO_HOG so that it is not built into SPL,
since it needs SPL_OF_REAL which is not enabled in sandbox_spl.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-09-25 09:46:15 -06:00
Simon Glass
3e57ad907c irq: Tidy up of-platdata irq support
This function is available but not exported. More generally it does not
really work as intended.

Reimplement it and add a sandbox test too.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-09-25 09:46:15 -06:00
Simon Glass
f0ab8f9fbe clk: Rename clk_get_by_driver_info()
This is actually a misnomer now, since the phandle info may contain
a driver_info index or a udevice index. Rename it to use the word
'phandle', which seems more accurate. Add a comment while we are here.

Also add a test for this function.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-09-25 09:46:15 -06:00
Simon Glass
7de8bd03c3 treewide: fdt: Move fdt_get_config_... to ofnode_conf_read...
The current API is outdated as it requires a devicetree pointer.

Move these functions to use the ofnode API and update this globally. Add
some tests while we are here.

Correct the call in exynos_dsim_config_parse_dt() which is obviously
wrong.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-09-25 09:46:15 -06:00
Pali Rohár
121a165c51 Remove including timestamp.h in version.h
Header file version.h does not use anything from timestamp.h. Including of
timestamp.h has side effect which cause recompiling object file at every
make run because timestamp.h changes at every run.

So remove timestamp.h from version.h and include timestamp.h in files
which needs it.

This change reduce recompilation time of final U-Boot binary when U-Boot
source files were not changed as less source files needs to be recompiled.

Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
[trini: Add in lib/acpi/acpi_table.c and test/dm/acpi.c, rework a few others]
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-09-17 12:10:44 -04:00
Tom Rini
6674edaabf Prepare v2021.10-rc4
-----BEGIN PGP SIGNATURE-----
 
 iQGzBAABCgAdFiEEGjx/cOCPqxcHgJu/FHw5/5Y0tywFAmFBKRgACgkQFHw5/5Y0
 tyw/PwwAtGB3rBeYW4rjWuMC5WP1UDTnvZIAok5ImWumWDahjDm8Yq2VCzAe9adw
 EYBjuNmaNl9aQvGVqlVJeIcLku5MLuLQu2za8vhc1R8X9VTPPY+LLTcdOokOmB8y
 8JiaE7fJsb1bZeV+diF9tss3B0IkUrwSJtW1d+qfdz/4UiRvwK5BhnZgzIobDldO
 g1Ldz/xiR2GOAXlUMwDrNAi6qNvmeAqRsQxySVrjltAV2ST7LJnOiHuWvJX6g6VS
 l796Hleh/kULfEW6n+1ZaTNqvVRcJ8xYSOG8w8y9u6HuPBA3JrYH1p1Eo5n7PPDv
 US71Iy/ncweTyfTMEBThWLqjHOQ05sVkWX/r4fj2iJRli+Og53lE1fVJ4ajIx7vz
 Tc76wI43i0I5lr2yTErjUG6EzDDoueqd+c8BwxihNLUK/+QG31xoCEMfC80C25ro
 QhYVFgiPWN0ySUD5M5tbGXODvfNNIDKXpY5oSOTVtemZtDEMpO2zBM1s/K3RV7Ud
 Je9Pj0Cu
 =Me42
 -----END PGP SIGNATURE-----

Merge tag 'v2021.10-rc4' into next

Prepare v2021.10-rc4

Signed-off-by: Tom Rini <trini@konsulko.com>

# gpg: Signature made Tue 14 Sep 2021 06:58:32 PM EDT
# gpg:                using RSA key 1A3C7F70E08FAB1707809BBF147C39FF9634B72C
# gpg: Good signature from "Thomas Rini <trini@konsulko.com>" [ultimate]

# Conflicts:
#	board/Arcturus/ucp1020/spl.c
#	cmd/mvebu/Kconfig
#	common/Kconfig.boot
#	common/image-fit.c
#	configs/UCP1020_defconfig
#	configs/sifive_unmatched_defconfig
#	drivers/pci/Kconfig
#	include/configs/UCP1020.h
#	include/configs/sifive-unmatched.h
#	lib/Makefile
#	scripts/config_whitelist.txt
2021-09-16 10:29:40 -04:00
Simon Glass
3232bdf0b3 pci: Drop DM_PCI
This option has not effect now. Drop it, using PCI instead where needed.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-09-13 18:23:13 -04:00
Rasmus Villemoes
4171c57472 sandbox: add test of wdt-uclass' watchdog_reset()
Check that the watchdog_reset() implementation in wdt-uclass behaves
as expected:

- resets all activated watchdog devices
- leaves unactivated/stopped devices alone
- that the rate-limiting works, with a per-device threshold

Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Stefan Roese <sr@denx.de>
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
2021-08-31 12:04:03 +02:00
Rasmus Villemoes
a9346b93b4 sandbox: add test of wdt_gpio driver
It seems that no other test has claimed gpio_a:7 yet, so use that.

The only small wrinkle is modifying the existing wdt test to use
uclass_get_device_by_driver() since we now have two UCLASS_WDT
instances in play, so it's a little more robust to fetch the device by
driver and not merely uclass+index.

Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Stefan Roese <sr@denx.de>
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
2021-08-31 12:04:03 +02:00
Nandor Han
c50b21b705 bootcount: add a new driver with syscon as backend
The driver will use a syscon regmap as backend and supports both
16 and 32 size value. The value will be stored in the CPU's endianness.

Signed-off-by: Nandor Han <nandor.han@vaisala.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2021-08-22 11:04:52 +02:00
Sebastian Reichel
2aefa6e3f2 i2c: add dm_i2c_reg_clrset
Add function to apply a bitmask to an i2c register, so
that specific bits can be cleared and/or set.

Suggested-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2021-08-22 10:52:53 +02:00
Alexandru Gagniuc
46a738a4ec test: dm: Add test for ECDSA UCLASS support
This test verifies that ECDSA_UCLASS is implemented, and that
ecdsa_verify() works as expected. The definition of "expected" is
"does not find a device, and returns -ENODEV".

The lack of a hardware-independent ECDSA implementation prevents us
from having one in the sandbox, for now.

Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2021-08-16 10:49:35 +02:00