leandrof/u-boot
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
master
u-boot/configs/kontron_pitx_imx8m_defconfig

116 lines
2.8 KiB
Plaintext
Raw Permalink Normal View History

board: kontron: pitx-imx8m: Add Kontron pitx-imx8m board support The Kontron pitx-imx8m is an NXP i.MX8MQ based board in the pITX form factor. Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
2022-01-31 16:30:45 +00:00
CONFIG_ARM=y
CONFIG_ARCH_IMX8M=y
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-10-21 00:22:39 +00:00
CONFIG_TEXT_BASE=0x40200000
board: kontron: pitx-imx8m: Add Kontron pitx-imx8m board support The Kontron pitx-imx8m is an NXP i.MX8MQ based board in the pITX form factor. Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
2022-01-31 16:30:45 +00:00
CONFIG_SYS_MALLOC_LEN=0x600000
CONFIG_SPL_GPIO=y
CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_SPL_LIBGENERIC_SUPPORT=y
CONFIG_ENV_SIZE=0x4000
CONFIG_ENV_OFFSET=0x300000
CONFIG_SYS_I2C_MXC_I2C1=y
CONFIG_SYS_I2C_MXC_I2C2=y
CONFIG_SYS_I2C_MXC_I2C3=y
CONFIG_DM_GPIO=y
CONFIG_DEFAULT_DEVICE_TREE="imx8mq-kontron-pitx-imx8m"
CONFIG_SPL_TEXT_BASE=0x7E1000
CONFIG_TARGET_KONTRON_PITX_IMX8M=y
CONFIG_SPL_MMC=y
CONFIG_SPL_SERIAL=y
CONFIG_SPL_DRIVERS_MISC=y
CONFIG_SPL=y
CONFIG_IMX_BOOTAUX=y
kontron-pitx-imx8m: change environment address variables Currently the space between kernel_addr_r and the fdt_addr_r is only 32MB. To have enought space to load kernel images bigger than 32MB change the variables to a feasible value. The new environment variables layout is based on the scheme from "include/configs/ti_armv7_common.h". The CONFIG_SYS_LOAD_ADDR value is set to 0x42000000. With that we have the same value as for the kernel_addr_r. Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
2022-02-16 12:25:15 +00:00
CONFIG_SYS_LOAD_ADDR=0x42000000
board: kontron: pitx-imx8m: Add Kontron pitx-imx8m board support The Kontron pitx-imx8m is an NXP i.MX8MQ based board in the pITX form factor. Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
2022-01-31 16:30:45 +00:00
CONFIG_DISTRO_DEFAULTS=y
configs: Re-run migrations As the CI test for stopping platforms from being merged that were defining symbols that had Kconfig entries, a small number of symbols needed to be migrated again. Do so, and catch two cases the README should also have been updated but was not. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-11 12:12:48 +00:00
CONFIG_REMAKE_ELF=y
Convert CONFIG_SYS_MONITOR_LEN to Kconfig This converts the following to Kconfig: CONFIG_SYS_MONITOR_LEN To do this, we set a default of 0 for everyone because there are a number of cases where we define CONFIG_SYS_MONITOR_LEN but the only impact is that we set TOTAL_MALLOC_LEN to be CONFIG_SYS_MALLOC_LEN + CONFIG_ENV_SIZE, so we must continue to allow all boards to set this value. Update the SPL code to use 200 KB as the default raw U-Boot size directly, if we don't have a real CONFIG_SYS_MONITOR_LEN value. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-10-29 00:27:07 +00:00
CONFIG_SYS_MONITOR_LEN=524288
board: kontron: pitx-imx8m: Add Kontron pitx-imx8m board support The Kontron pitx-imx8m is an NXP i.MX8MQ based board in the pITX form factor. Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
2022-01-31 16:30:45 +00:00
CONFIG_FIT=y
CONFIG_SPL_FIT_PRINT=y
CONFIG_SPL_LOAD_FIT=y
# CONFIG_USE_SPL_FIT_GENERATOR is not set
configs: Re-run migrations As the CI test for stopping platforms from being merged that were defining symbols that had Kconfig entries, a small number of symbols needed to be migrated again. Do so, and catch two cases the README should also have been updated but was not. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-11 12:12:48 +00:00
CONFIG_OF_SYSTEM_SETUP=y
board: kontron: pitx-imx8m: Add Kontron pitx-imx8m board support The Kontron pitx-imx8m is an NXP i.MX8MQ based board in the pITX form factor. Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
2022-01-31 16:30:45 +00:00
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_BOARD_LATE_INIT=y
CONFIG_MISC_INIT_R=y
Convert CONFIG_SPL_PAD_TO et al to Kconfig This converts the following to Kconfig: CONFIG_SPL_PAD_TO CONFIG_SPL_MAX_SIZE CONFIG_TPL_PAD_TO CONFIG_TPL_MAX_SIZE Note that we need to make TPL_MAX_SIZE be hex, and so move and convert the existing places. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-05-16 21:20:26 +00:00
CONFIG_SPL_MAX_SIZE=0x1f000
Convert CONFIG_SPL_BSS_START_ADDR to Kconfig This converts the following to Kconfig: CONFIG_SPL_BSS_START_ADDR Signed-off-by: Tom Rini <trini@konsulko.com>
2022-05-27 14:19:45 +00:00
CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
CONFIG_SPL_BSS_START_ADDR=0x180000
Convert CONFIG_SPL_BSS_MAX_SIZE et al to Kconfig This converts the following to Kconfig: CONFIG_SPL_BSS_MAX_SIZE CONFIG_SPL_MAX_FOOTPRINT Note that the da850evm platforms were violating the "only use one" rule here, and so now hard-code their BSS limit. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-05-19 19:09:22 +00:00
CONFIG_SPL_BSS_MAX_SIZE=0x2000
Convert CONFIG_SPL_STACK to Kconfig This converts the following to Kconfig: CONFIG_SPL_STACK Signed-off-by: Tom Rini <trini@konsulko.com>
2022-05-26 17:13:21 +00:00
# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
CONFIG_SPL_STACK=0x187ff0
Convert CONFIG_SYS_SPL_MALLOC_SIZE et al to Kconfig This converts the following to Kconfig: CONFIG_SYS_SPL_MALLOC_SIZE CONFIG_SYS_SPL_MALLOC_START We introduce a default value here as well, and CONFIG_SYS_SPL_MALLOC to control if we have a malloc pool or not. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-05-27 16:48:32 +00:00
CONFIG_SYS_SPL_MALLOC=y
CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y
CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x42200000
CONFIG_SYS_SPL_MALLOC_SIZE=0x80000
configs: Re-run migrations As the CI test for stopping platforms from being merged that were defining symbols that had Kconfig entries, a small number of symbols needed to be migrated again. Do so, and catch two cases the README should also have been updated but was not. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-11 12:12:48 +00:00
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300
board: kontron: pitx-imx8m: Add Kontron pitx-imx8m board support The Kontron pitx-imx8m is an NXP i.MX8MQ based board in the pITX form factor. Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
2022-01-31 16:30:45 +00:00
CONFIG_SPL_I2C=y
CONFIG_SPL_POWER=y
CONFIG_SPL_WATCHDOG=y
Convert CONFIG_SYS_CBSIZE to Kconfig This converts the following to Kconfig: CONFIG_SYS_CBSIZE Signed-off-by: Tom Rini <trini@konsulko.com>
2022-05-11 22:01:06 +00:00
CONFIG_SYS_CBSIZE=256
Convert CONFIG_SYS_PBSIZE to Kconfig This converts the following to Kconfig: CONFIG_SYS_PBSIZE Signed-off-by: Tom Rini <trini@konsulko.com>
2022-05-11 21:38:09 +00:00
CONFIG_SYS_PBSIZE=276
board: kontron: pitx-imx8m: Add Kontron pitx-imx8m board support The Kontron pitx-imx8m is an NXP i.MX8MQ based board in the pITX form factor. Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
2022-01-31 16:30:45 +00:00
# CONFIG_BOOTM_NETBSD is not set
Convert CONFIG_SYS_BOOTM_LEN to Kconfig This converts the following to Kconfig: CONFIG_SYS_BOOTM_LEN As part of this, rework error handling in boot/bootm.c so that we pass the buffer size to handle_decomp_error as CONFIG_SYS_BOOTM_LEN will not be available to host tools but we do know the size that we passed to malloc(). Cc: Soeren Moch <smoch@web.de> Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-25 23:29:46 +00:00
CONFIG_SYS_BOOTM_LEN=0x2000000
board: kontron: pitx-imx8m: Add Kontron pitx-imx8m board support The Kontron pitx-imx8m is an NXP i.MX8MQ based board in the pITX form factor. Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
2022-01-31 16:30:45 +00:00
# CONFIG_CMD_EXPORTENV is not set
# CONFIG_CMD_IMPORTENV is not set
CONFIG_CMD_NVEDIT_EFI=y
# CONFIG_CMD_CRC32 is not set
CONFIG_CMD_DFU=y
CONFIG_CMD_FUSE=y
CONFIG_CMD_GPIO=y
CONFIG_CMD_GPT=y
# CONFIG_RANDOM_UUID is not set
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_USB=y
# CONFIG_CMD_MDIO is not set
CONFIG_CMD_CACHE=y
CONFIG_CMD_EFIDEBUG=y
CONFIG_CMD_RTC=y
CONFIG_CMD_TIME=y
CONFIG_CMD_REGULATOR=y
CONFIG_CMD_HASH=y
CONFIG_CMD_EXT4_WRITE=y
CONFIG_OF_CONTROL=y
CONFIG_ENV_OVERWRITE=y
CONFIG_ENV_IS_IN_MMC=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-11 14:12:07 +00:00
CONFIG_USE_ETHPRIME=y
CONFIG_ETHPRIME="FEC"
board: kontron: pitx-imx8m: Add Kontron pitx-imx8m board support The Kontron pitx-imx8m is an NXP i.MX8MQ based board in the pITX form factor. Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
2022-01-31 16:30:45 +00:00
CONFIG_SAVED_DRAM_TIMING_BASE=0x40000000
CONFIG_DFU_MMC=y
CONFIG_MXC_GPIO=y
CONFIG_DM_I2C=y
CONFIG_SPL_SYS_I2C_LEGACY=y
CONFIG_SUPPORT_EMMC_BOOT=y
CONFIG_FSL_USDHC=y
CONFIG_PHYLIB=y
CONFIG_PHY_TI=y
CONFIG_PHY_GIGE=y
CONFIG_FEC_MXC=y
CONFIG_MII=y
CONFIG_PHY=y
CONFIG_PHY_IMX8MQ_USB=y
CONFIG_PINCTRL=y
CONFIG_PINCTRL_IMX8M=y
CONFIG_SPL_POWER_LEGACY=y
CONFIG_POWER_DOMAIN=y
CONFIG_IMX8M_POWER_DOMAIN=y
Convert CONFIG_POWER_LTC3676 et al to Kconfig This converts the following to Kconfig: CONFIG_POWER_FSL CONFIG_POWER_FSL_MC13892 CONFIG_POWER_HI6553 CONFIG_POWER_LTC3676 CONFIG_POWER_PFUZE100 CONFIG_POWER_PFUZE3000 CONFIG_POWER_SPI CONFIG_POWER_TPS65090_EC CONFIG_POWER_TPS65218 CONFIG_POWER_TPS65910 Signed-off-by: Tom Rini <trini@konsulko.com>
2022-11-19 23:45:15 +00:00
CONFIG_POWER_PFUZE100=y
board: kontron: pitx-imx8m: Add Kontron pitx-imx8m board support The Kontron pitx-imx8m is an NXP i.MX8MQ based board in the pITX form factor. Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
2022-01-31 16:30:45 +00:00
CONFIG_DM_REGULATOR=y
CONFIG_DM_REGULATOR_FIXED=y
CONFIG_DM_REGULATOR_GPIO=y
CONFIG_SPL_POWER_I2C=y
CONFIG_DM_RESET=y
CONFIG_DM_RTC=y
CONFIG_RTC_RV8803=y
CONFIG_DM_SERIAL=y
CONFIG_MXC_UART=y
CONFIG_DM_THERMAL=y
CONFIG_USB=y
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_DWC3=y
CONFIG_USB_DWC3=y
CONFIG_EFI_SET_TIME=y
CONFIG_EFI_RUNTIME_UPDATE_CAPSULE=y
CONFIG_EFI_CAPSULE_FIRMWARE_FIT=y
Reference in New Issue Copy Permalink