Convert CONFIG_SPL_BSS_MAX_SIZE et al to Kconfig

This converts the following to Kconfig:
   CONFIG_SPL_BSS_MAX_SIZE
   CONFIG_SPL_MAX_FOOTPRINT

Note that the da850evm platforms were violating the "only use one" rule
here, and so now hard-code their BSS limit.

Signed-off-by: Tom Rini <trini@konsulko.com>
This commit is contained in:
Tom Rini 2022-05-19 15:09:22 -04:00
parent ca8a329a1b
commit 9b5f9aeb3b
445 changed files with 407 additions and 182 deletions

14
README
View File

@ -1658,13 +1658,6 @@ The following options need to be configured:
CONFIG_SPL
Enable building of SPL globally.
CONFIG_SPL_MAX_FOOTPRINT
Maximum size in memory allocated to the SPL, BSS included.
When defined, the linker checks that the actual memory
used by SPL from _start to __bss_end does not exceed it.
CONFIG_SPL_MAX_FOOTPRINT and CONFIG_SPL_BSS_MAX_SIZE
must not be both defined at the same time.
CONFIG_SPL_RELOC_TEXT_BASE
Address to relocate to. If unspecified, this is equal to
CONFIG_SPL_TEXT_BASE (i.e. no relocation is done).
@ -1672,13 +1665,6 @@ The following options need to be configured:
CONFIG_SPL_BSS_START_ADDR
Link address for the BSS within the SPL binary.
CONFIG_SPL_BSS_MAX_SIZE
Maximum size in memory allocated to the SPL BSS.
When defined, the linker checks that the actual memory used
by SPL from __bss_start to __bss_end does not exceed it.
CONFIG_SPL_MAX_FOOTPRINT and CONFIG_SPL_BSS_MAX_SIZE
must not be both defined at the same time.
CONFIG_SPL_STACK
Adress of the start of the stack SPL will use

View File

@ -11,7 +11,7 @@ MEMORY { .sram : ORIGIN = IMAGE_TEXT_BASE,\
LENGTH = CONFIG_SPL_MAX_FOOTPRINT }
MEMORY { .sdram : ORIGIN = CONFIG_SPL_BSS_START_ADDR, \
LENGTH = CONFIG_SPL_BSS_MAX_SIZE }
LENGTH = 0x1080000 }
OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
OUTPUT_ARCH(arm)

View File

@ -105,6 +105,44 @@ config SPL_PAD_TO
0, meaning to append the SPL payload without any padding, or >=
CONFIG_SPL_MAX_SIZE.
choice
prompt "Enforce SPL BSS limit"
depends on SPL && !PPC
default SPL_BSS_LIMIT
help
In some platforms we only want to enforce a limit on the size of the
BSS in memory. On other platforms we need to enforce a limit on the
whole of the memory allocation as we're strictly limited to a small
typically non-DRAM location. Finally, other platforms do not enforce
a memory limit within SPL.
config SPL_NO_BSS_LIMIT
bool "Do not enforce a build time limit on the size of the BSS"
config SPL_BSS_LIMIT
bool "Enforce a limit on the size of the BSS only"
config SPL_FOOTPRINT_LIMIT
bool "Enforce a limit on the whole of memory allocated to SPL, BSS included"
endchoice
config SPL_BSS_MAX_SIZE
hex "Maximum size in memory allocated to the SPL BSS"
depends on SPL_BSS_LIMIT
default 0x100000 if ARCH_MX6 || RISCV
default 0x80000 if ARCH_OMAP2PLUS || ARCH_SUNXI
help
When non-zero, the linker checks that the actual memory used by SPL
from __bss_start to __bss_end does not exceed it.
config SPL_MAX_FOOTPRINT
hex "Maximum size in memory allocated to the SPL, BSS included"
depends on SPL_FOOTPRINT_LIMIT
help
When non-zero, the linker checks that the actual memory used by SPL
from _start to __bss_end does not exceed it.
config SPL_SYS_STACK_F_CHECK_BYTE
hex
default 0xaa

View File

@ -29,6 +29,7 @@ CONFIG_ENV_ADDR=0xC0000
CONFIG_FIT=y
CONFIG_BOOTDELAY=3
CONFIG_SPL_MAX_SIZE=0x4000
CONFIG_SPL_NO_BSS_LIMIT=y
CONFIG_SPL_BOARD_INIT=y
CONFIG_SPL_SYS_MALLOC_SIMPLE=y
CONFIG_SPL_RAM_SUPPORT=y

View File

@ -31,6 +31,7 @@ CONFIG_SPL_LOAD_FIT_ADDRESS=0x81000000
CONFIG_BOOTCOMMAND="run findfdt; run envboot; run init_${boot}; run get_kern_${boot}; run get_fdt_${boot}; run run_kern"
CONFIG_BOARD_LATE_INIT=y
CONFIG_SPL_MAX_SIZE=0x180000
CONFIG_SPL_BSS_MAX_SIZE=0x80000
CONFIG_SPL_BOARD_INIT=y
CONFIG_SPL_SYS_MALLOC_SIMPLE=y
CONFIG_SPL_STACK_R=y

View File

@ -32,6 +32,7 @@ CONFIG_BOOTCOMMAND="run distro_bootcmd"
CONFIG_SPL_SIZE_LIMIT_SUBTRACT_GD=y
CONFIG_SPL_SIZE_LIMIT_SUBTRACT_MALLOC=y
CONFIG_SPL_MAX_SIZE=0x180000
CONFIG_SPL_BSS_MAX_SIZE=0x4000
CONFIG_SPL_SYS_REPORT_STACK_F_USAGE=y
CONFIG_SPL_BOARD_INIT=y
CONFIG_SPL_SYS_MALLOC_SIMPLE=y

View File

@ -34,6 +34,7 @@ CONFIG_BOOTCOMMAND="run findfdt; run distro_bootcmd; run init_${boot}; run boot_
CONFIG_LOGLEVEL=7
CONFIG_CONSOLE_MUX=y
CONFIG_SPL_MAX_SIZE=0x58000
CONFIG_SPL_BSS_MAX_SIZE=0x80000
CONFIG_SPL_SYS_MALLOC_SIMPLE=y
CONFIG_SPL_STACK_R=y
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y

View File

@ -32,6 +32,7 @@ CONFIG_USE_BOOTCOMMAND=y
CONFIG_SPL_SIZE_LIMIT_SUBTRACT_GD=y
CONFIG_SPL_SIZE_LIMIT_SUBTRACT_MALLOC=y
CONFIG_SPL_MAX_SIZE=0x58000
CONFIG_SPL_BSS_MAX_SIZE=0xc00
CONFIG_SPL_SYS_REPORT_STACK_F_USAGE=y
CONFIG_SPL_STACK_R=y
CONFIG_SPL_SEPARATE_BSS=y

View File

@ -24,6 +24,7 @@ CONFIG_SPL_LOAD_FIT_ADDRESS=0x80080000
CONFIG_USE_BOOTCOMMAND=y
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_SPL_MAX_SIZE=0x58000
CONFIG_SPL_BSS_MAX_SIZE=0xc00
CONFIG_SPL_STACK_R=y
CONFIG_SPL_SEPARATE_BSS=y
CONFIG_SPL_EARLY_BSS=y

View File

@ -23,6 +23,7 @@ CONFIG_SPL_LOAD_FIT=y
CONFIG_USE_BOOTCOMMAND=y
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_SPL_MAX_SIZE=0x58000
CONFIG_SPL_BSS_MAX_SIZE=0xc00
CONFIG_SPL_STACK_R=y
CONFIG_SPL_SEPARATE_BSS=y
CONFIG_SPL_EARLY_BSS=y

View File

@ -34,6 +34,7 @@ CONFIG_BOOTCOMMAND="run findfdt; run envboot; run init_${boot}; run get_fit_${bo
CONFIG_LOGLEVEL=7
CONFIG_CONSOLE_MUX=y
CONFIG_SPL_MAX_SIZE=0x58000
CONFIG_SPL_BSS_MAX_SIZE=0x80000
CONFIG_SPL_SYS_MALLOC_SIMPLE=y
CONFIG_SPL_STACK_R=y
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y

View File

@ -29,6 +29,7 @@ CONFIG_SPL_LOAD_FIT=y
CONFIG_USE_BOOTCOMMAND=y
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_SPL_MAX_SIZE=0x58000
CONFIG_SPL_BSS_MAX_SIZE=0xc00
CONFIG_SPL_STACK_R=y
CONFIG_SPL_SEPARATE_BSS=y
CONFIG_SPL_EARLY_BSS=y

View File

@ -21,6 +21,8 @@ CONFIG_SYS_STDIO_DEREGISTER=y
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_ARCH_MISC_INIT=y
CONFIG_SPL_FOOTPRINT_LIMIT=y
CONFIG_SPL_MAX_FOOTPRINT=0x8000
CONFIG_SYS_PROMPT="Apalis TK1 # "
CONFIG_SYS_MAXARGS=32
CONFIG_SYS_CBSIZE=1024

View File

@ -17,6 +17,8 @@ CONFIG_SYS_STDIO_DEREGISTER=y
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_ARCH_MISC_INIT=y
CONFIG_SPL_FOOTPRINT_LIMIT=y
CONFIG_SPL_MAX_FOOTPRINT=0x8000
CONFIG_SYS_PROMPT="Apalis T30 # "
CONFIG_SYS_MAXARGS=32
CONFIG_SYS_CBSIZE=1024

View File

@ -23,6 +23,8 @@ CONFIG_USE_PREBOOT=y
CONFIG_SILENT_CONSOLE=y
CONFIG_CONSOLE_MUX=y
# CONFIG_SPL_FRAMEWORK is not set
CONFIG_SPL_FOOTPRINT_LIMIT=y
CONFIG_SPL_MAX_FOOTPRINT=0x3800
CONFIG_SYS_PROMPT="ARNDALE # "
CONFIG_SYS_PBSIZE=1024
CONFIG_CMD_GPIO=y

View File

@ -27,6 +27,7 @@ CONFIG_BOOTDELAY=0
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_CLOCKS=y
CONFIG_SPL_MAX_SIZE=0x40000
CONFIG_SPL_BSS_MAX_SIZE=0x80000
CONFIG_SPL_FS_LOAD_KERNEL_NAME="atf-uboot.ub"
CONFIG_SPL_FS_LOAD_ARGS_NAME="u-boot.bin"
CONFIG_SPL_OS_BOOT=y

View File

@ -37,6 +37,7 @@ CONFIG_BOOTCOMMAND="run flash_self"
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_SPL_MAX_SIZE=0x3e00
CONFIG_SPL_PAD_TO=0x20000
CONFIG_SPL_BSS_MAX_SIZE=0x600
# CONFIG_SPL_LEGACY_IMAGE_FORMAT is not set
CONFIG_SPL_SYS_MALLOC_SIMPLE=y
CONFIG_SPL_CRC32=y

View File

@ -14,6 +14,8 @@ CONFIG_SYS_LOAD_ADDR=0x81000000
CONFIG_OF_SYSTEM_SETUP=y
CONFIG_CONSOLE_MUX=y
CONFIG_SYS_STDIO_DEREGISTER=y
CONFIG_SPL_FOOTPRINT_LIMIT=y
CONFIG_SPL_MAX_FOOTPRINT=0x8000
CONFIG_SYS_PROMPT="Tegra30 (Beaver) # "
CONFIG_SYS_MAXARGS=64
CONFIG_SYS_PBSIZE=2084

View File

@ -28,6 +28,7 @@ CONFIG_USE_PREBOOT=y
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_CLOCKS=y
CONFIG_SPL_MAX_SIZE=0x30000
CONFIG_SPL_BSS_MAX_SIZE=0x100000
CONFIG_SPL_STACK_R=y
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="antminer> "

View File

@ -13,6 +13,8 @@ CONFIG_SYS_LOAD_ADDR=0x81000000
CONFIG_OF_SYSTEM_SETUP=y
CONFIG_CONSOLE_MUX=y
CONFIG_SYS_STDIO_DEREGISTER=y
CONFIG_SPL_FOOTPRINT_LIMIT=y
CONFIG_SPL_MAX_FOOTPRINT=0x8000
CONFIG_SYS_PROMPT="Tegra30 (Cardhu) # "
CONFIG_SYS_MAXARGS=64
CONFIG_SYS_PBSIZE=2084

View File

@ -15,6 +15,8 @@ CONFIG_SYS_LOAD_ADDR=0x81000000
CONFIG_OF_SYSTEM_SETUP=y
CONFIG_CONSOLE_MUX=y
CONFIG_SYS_STDIO_DEREGISTER=y
CONFIG_SPL_FOOTPRINT_LIMIT=y
CONFIG_SPL_MAX_FOOTPRINT=0x8000
CONFIG_SYS_PROMPT="Tegra124 (TK1-SOM) # "
CONFIG_SYS_MAXARGS=64
CONFIG_SYS_PBSIZE=2086

View File

@ -27,6 +27,7 @@ CONFIG_BOOTCOMMAND="mmc dev ${mmcdev}; if mmc rescan; then if run loadbootscript
CONFIG_LOG=y
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_SPL_MAX_SIZE=0x1f000
CONFIG_SPL_BSS_MAX_SIZE=0x1000
CONFIG_SPL_BOARD_INIT=y
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x800

View File

@ -24,6 +24,7 @@ CONFIG_DEFAULT_FDT_FILE="rk3288-veyron-mickey.dtb"
CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_BOARD_EARLY_INIT_R=y
CONFIG_SPL_PAD_TO=0x7f8000
CONFIG_SPL_NO_BSS_LIMIT=y
# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
CONFIG_SPL_STACK_R=y
CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x2000

View File

@ -28,6 +28,7 @@ CONFIG_BLOBLIST_ADDR=0x100000
CONFIG_BLOBLIST_SIZE=0x1000
CONFIG_SPL_MAX_SIZE=0x2e000
CONFIG_SPL_PAD_TO=0x7f8000
CONFIG_SPL_BSS_MAX_SIZE=0x10000
CONFIG_HANDOFF=y
# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
CONFIG_SPL_STACK_R=y

View File

@ -41,6 +41,7 @@ CONFIG_BLOBLIST=y
# CONFIG_TPL_BLOBLIST is not set
CONFIG_BLOBLIST_ADDR=0x100000
CONFIG_BLOBLIST_SIZE=0x30000
CONFIG_SPL_NO_BSS_LIMIT=y
CONFIG_HANDOFF=y
CONFIG_TPL_SYS_MALLOC_SIMPLE=y
CONFIG_SPL_SEPARATE_BSS=y

View File

@ -25,6 +25,7 @@ CONFIG_LOG=y
CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_BOARD_EARLY_INIT_R=y
CONFIG_SPL_PAD_TO=0x7f8000
CONFIG_SPL_NO_BSS_LIMIT=y
# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
CONFIG_SPL_STACK_R=y
CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x2000

View File

@ -29,6 +29,7 @@ CONFIG_BLOBLIST_ADDR=0x100000
CONFIG_BLOBLIST_SIZE=0x1000
CONFIG_SPL_MAX_SIZE=0x2e000
CONFIG_SPL_PAD_TO=0x7f8000
CONFIG_SPL_BSS_MAX_SIZE=0x10000
CONFIG_HANDOFF=y
# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
CONFIG_SPL_STACK_R=y

View File

@ -32,6 +32,7 @@ CONFIG_SYS_CONSOLE_INFO_QUIET=y
CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_LAST_STAGE_INIT=y
CONFIG_MISC_INIT_R=y
CONFIG_SPL_NO_BSS_LIMIT=y
CONFIG_SPL_SYS_MALLOC_SIMPLE=y
CONFIG_SPL_CPU=y
CONFIG_SPL_ENV_SUPPORT=y

View File

@ -25,6 +25,7 @@ CONFIG_SILENT_CONSOLE=y
CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_BOARD_EARLY_INIT_R=y
CONFIG_SPL_PAD_TO=0x7f8000
CONFIG_SPL_NO_BSS_LIMIT=y
# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
CONFIG_SPL_STACK_R=y
CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x2000

View File

@ -35,6 +35,7 @@ CONFIG_MISC_INIT_R=y
CONFIG_BLOBLIST=y
CONFIG_BLOBLIST_ADDR=0xff7c0000
CONFIG_BLOBLIST_SIZE=0x1000
CONFIG_SPL_NO_BSS_LIMIT=y
CONFIG_HANDOFF=y
CONFIG_SPL_SEPARATE_BSS=y
CONFIG_SPL_DM_SPI_FLASH=y

View File

@ -25,6 +25,7 @@ CONFIG_SILENT_CONSOLE=y
CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_BOARD_EARLY_INIT_R=y
CONFIG_SPL_PAD_TO=0x7f8000
CONFIG_SPL_NO_BSS_LIMIT=y
# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
CONFIG_SPL_STACK_R=y
CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x2000

View File

@ -24,6 +24,7 @@ CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_MISC_INIT_R=y
CONFIG_SYS_MALLOC_BOOTPARAMS=y
CONFIG_SPL_MAX_SIZE=0x2e00
CONFIG_SPL_BSS_MAX_SIZE=0x2000
# CONFIG_SPL_BANNER_PRINT is not set
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x1c

View File

@ -26,6 +26,7 @@ CONFIG_USE_BOOTCOMMAND=y
CONFIG_BOOTCOMMAND="echo SD boot attempt ...; run sdbootscript; run sdboot; echo eMMC boot attempt ...; run emmcbootscript; run emmcboot; echo USB boot attempt ...; run usbbootscript; "
CONFIG_BOARD_LATE_INIT=y
CONFIG_SPL_MAX_SIZE=0xe000
CONFIG_SPL_BSS_MAX_SIZE=0x100000
CONFIG_SPL_BOARD_INIT=y
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x80
CONFIG_SPL_I2C=y

View File

@ -25,6 +25,7 @@ CONFIG_SYS_CONSOLE_INFO_QUIET=y
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_SPL_MAX_SIZE=0x22fd0
CONFIG_SPL_BSS_MAX_SIZE=0x4000
CONFIG_SPL_I2C=y
CONFIG_SYS_MAXARGS=32
CONFIG_CMD_TLV_EEPROM=y

View File

@ -16,6 +16,8 @@ CONFIG_SYS_STDIO_DEREGISTER=y
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_ARCH_MISC_INIT=y
CONFIG_SPL_FOOTPRINT_LIMIT=y
CONFIG_SPL_MAX_FOOTPRINT=0x8000
CONFIG_SYS_PROMPT="Colibri T20 # "
CONFIG_SYS_MAXARGS=32
CONFIG_SYS_CBSIZE=1024

View File

@ -17,6 +17,8 @@ CONFIG_SYS_STDIO_DEREGISTER=y
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_ARCH_MISC_INIT=y
CONFIG_SPL_FOOTPRINT_LIMIT=y
CONFIG_SPL_MAX_FOOTPRINT=0x8000
CONFIG_SYS_PROMPT="Colibri T30 # "
CONFIG_SYS_MAXARGS=32
CONFIG_SYS_CBSIZE=1024

View File

@ -33,6 +33,7 @@ CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_BOARD_LATE_INIT=y
CONFIG_LAST_STAGE_INIT=y
CONFIG_SPL_MAX_SIZE=0x27fd0
CONFIG_SPL_BSS_MAX_SIZE=0x4000
CONFIG_SPL_BOARD_INIT=y
CONFIG_SPL_SYS_MALLOC_SIMPLE=y
CONFIG_SPL_I2C=y

View File

@ -20,6 +20,7 @@ CONFIG_PRE_CONSOLE_BUFFER=y
CONFIG_SYS_CONSOLE_INFO_QUIET=y
CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_LAST_STAGE_INIT=y
CONFIG_SPL_NO_BSS_LIMIT=y
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PBSIZE=532
CONFIG_CMD_IDE=y

View File

@ -32,6 +32,7 @@ CONFIG_BOOTCOMMAND="nand read 0x70000000 0x200000 0x300000;bootm 0x70000000"
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_SPL_MAX_SIZE=0x3000
CONFIG_SPL_PAD_TO=0x20000
CONFIG_SPL_BSS_MAX_SIZE=0x800
CONFIG_SPL_SYS_MALLOC_SIMPLE=y
CONFIG_SPL_NAND_SUPPORT=y
CONFIG_SPL_NAND_RAW_ONLY=y

View File

@ -34,6 +34,8 @@ CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_CLOCKS=y
CONFIG_MISC_INIT_R=y
CONFIG_SPL_PAD_TO=0x8000
CONFIG_SPL_FOOTPRINT_LIMIT=y
CONFIG_SPL_MAX_FOOTPRINT=0x8000
CONFIG_SPL_SYS_MALLOC_SIMPLE=y
# CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR is not set
CONFIG_SPL_DM_SPI_FLASH=y

View File

@ -31,6 +31,8 @@ CONFIG_DEFAULT_FDT_FILE="da850-evm.dtb"
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_CLOCKS=y
CONFIG_SPL_PAD_TO=0x8000
CONFIG_SPL_FOOTPRINT_LIMIT=y
CONFIG_SPL_MAX_FOOTPRINT=0x8000
CONFIG_SPL_SYS_MALLOC_SIMPLE=y
# CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR is not set
CONFIG_SPL_NAND_SUPPORT=y

View File

@ -14,6 +14,8 @@ CONFIG_SYS_LOAD_ADDR=0x81000000
CONFIG_OF_SYSTEM_SETUP=y
CONFIG_CONSOLE_MUX=y
CONFIG_SYS_STDIO_DEREGISTER=y
CONFIG_SPL_FOOTPRINT_LIMIT=y
CONFIG_SPL_MAX_FOOTPRINT=0x8000
CONFIG_SYS_PROMPT="Tegra114 (Dalmore) # "
CONFIG_SYS_MAXARGS=64
CONFIG_SYS_PBSIZE=2086

View File

@ -24,6 +24,7 @@ CONFIG_SYS_CONSOLE_INFO_QUIET=y
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_SPL_MAX_SIZE=0x1ffd0
CONFIG_SPL_BSS_MAX_SIZE=0x4000
CONFIG_SPL_I2C=y
CONFIG_SYS_MAXARGS=32
CONFIG_CMD_I2C=y

View File

@ -25,6 +25,7 @@ CONFIG_SYS_CONSOLE_INFO_QUIET=y
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_SPL_MAX_SIZE=0x22fd0
CONFIG_SPL_BSS_MAX_SIZE=0x4000
CONFIG_SPL_I2C=y
CONFIG_SYS_MAXARGS=96
# CONFIG_CMD_FLASH is not set

View File

@ -24,6 +24,7 @@ CONFIG_SYS_CONSOLE_INFO_QUIET=y
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_SPL_MAX_SIZE=0x22fd0
CONFIG_SPL_BSS_MAX_SIZE=0x4000
CONFIG_SPL_I2C=y
CONFIG_SYS_MAXARGS=32
CONFIG_CMD_I2C=y

View File

@ -24,6 +24,7 @@ CONFIG_SYS_CONSOLE_INFO_QUIET=y
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_SPL_MAX_SIZE=0x1bfd0
CONFIG_SPL_BSS_MAX_SIZE=0x4000
CONFIG_SPL_I2C=y
CONFIG_SYS_MAXARGS=32
# CONFIG_CMD_FLASH is not set

View File

@ -35,6 +35,7 @@ CONFIG_BOOTCOMMAND="if usrbutton; then run flash_self_test; reset; fi;run flash_
CONFIG_LOG=y
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_SPL_MAX_SIZE=0x1f000
CONFIG_SPL_BSS_MAX_SIZE=0x1000
CONFIG_SPL_BOARD_INIT=y
CONFIG_SPL_SYS_MALLOC_SIMPLE=y
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y

View File

@ -24,6 +24,7 @@ CONFIG_BOOTCOMMAND="dhcp; tftp ${loadaddr} ${serverip}:${tftpdir}/${bootfile}; t
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_SPL_MAX_SIZE=0x20000
CONFIG_SPL_NO_BSS_LIMIT=y
CONFIG_SPL_BOARD_INIT=y
CONFIG_SPL_SYS_MALLOC_SIMPLE=y
CONFIG_SPL_NAND_SUPPORT=y

View File

@ -32,6 +32,7 @@ CONFIG_BOOTCOMMAND="sf probe; sf read ${loadaddr} 0xd0000 0x2d0000; sf read ${ra
CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_MISC_INIT_R=y
CONFIG_SPL_MAX_SIZE=0x1bfd0
CONFIG_SPL_BSS_MAX_SIZE=0x4000
CONFIG_SPL_I2C=y
CONFIG_SYS_MAXARGS=32
# CONFIG_CMD_FLASH is not set

View File

@ -21,6 +21,7 @@ CONFIG_BOOTDELAY=3
CONFIG_ARCH_MISC_INIT=y
CONFIG_RESET_PHY_R=y
CONFIG_SPL_MAX_SIZE=0xfff0
CONFIG_SPL_BSS_MAX_SIZE=0x1ffff
CONFIG_SPL_BOARD_INIT=y
CONFIG_SPL_NOR_SUPPORT=y
CONFIG_HUSH_PARSER=y

View File

@ -32,6 +32,7 @@ CONFIG_BOOTCOMMAND="run bootspi"
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_SPL_SIZE_LIMIT_SUBTRACT_GD=y
CONFIG_SPL_SIZE_LIMIT_SUBTRACT_MALLOC=y
CONFIG_SPL_NO_BSS_LIMIT=y
CONFIG_SPL_SYS_MALLOC_SIMPLE=y
CONFIG_SPL_STACK_R=y
CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x2000000

View File

@ -30,6 +30,7 @@ CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_MISC_INIT_R=y
CONFIG_SPL_MAX_SIZE=0x20000
CONFIG_SPL_PAD_TO=0x7f8000
CONFIG_SPL_BSS_MAX_SIZE=0x4000
CONFIG_SPL_BOOTROM_SUPPORT=y
# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
CONFIG_SPL_STACK_R=y

View File

@ -34,6 +34,7 @@ CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_ARCH_EARLY_INIT_R=y
CONFIG_SPL_MAX_SIZE=0x40000
CONFIG_SPL_PAD_TO=0x7f8000
CONFIG_SPL_BSS_MAX_SIZE=0x20000
CONFIG_SPL_BOOTROM_SUPPORT=y
# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
CONFIG_TPL_SYS_MALLOC_SIMPLE=y

View File

@ -24,6 +24,7 @@ CONFIG_DEFAULT_FDT_FILE="rk3036-evb.dtb"
CONFIG_DISPLAY_BOARDINFO_LATE=y
# CONFIG_SPL_FRAMEWORK is not set
CONFIG_SPL_PAD_TO=0x7f8000
CONFIG_SPL_NO_BSS_LIMIT=y
CONFIG_SPL_STACK_R=y
CONFIG_CMD_GPT=y
CONFIG_CMD_I2C=y

View File

@ -28,6 +28,7 @@ CONFIG_DEFAULT_FDT_FILE="rk3229-evb.dtb"
CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_SPL_MAX_SIZE=0x100000
CONFIG_SPL_PAD_TO=0x7f8000
CONFIG_SPL_NO_BSS_LIMIT=y
# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
CONFIG_SPL_STACK_R=y
CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x2000

View File

@ -25,6 +25,7 @@ CONFIG_DEFAULT_FDT_FILE="rk3288-evb-rk808.dtb"
CONFIG_SILENT_CONSOLE=y
CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_SPL_PAD_TO=0x7f8000
CONFIG_SPL_NO_BSS_LIMIT=y
CONFIG_SPL_STACK_R=y
CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x10000
CONFIG_SPL_OPTEE_IMAGE=y

View File

@ -24,6 +24,7 @@ CONFIG_SYS_CONSOLE_INFO_QUIET=y
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_SPL_MAX_SIZE=0x20000
CONFIG_SPL_PAD_TO=0x7f8000
CONFIG_SPL_BSS_MAX_SIZE=0x2000
CONFIG_SPL_STACK_R=y
# CONFIG_CMD_BDI is not set
# CONFIG_CMD_CONSOLE is not set

View File

@ -27,6 +27,7 @@ CONFIG_DEFAULT_FDT_FILE="rockchip/rk3328-evb.dtb"
CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_SPL_MAX_SIZE=0x40000
CONFIG_SPL_PAD_TO=0x7f8000
CONFIG_SPL_BSS_MAX_SIZE=0x2000
# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
CONFIG_TPL_SYS_MALLOC_SIMPLE=y
CONFIG_SPL_STACK_R=y

View File

@ -16,6 +16,7 @@ CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-evb.dtb"
CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_SPL_MAX_SIZE=0x2e000
CONFIG_SPL_PAD_TO=0x7f8000
CONFIG_SPL_BSS_MAX_SIZE=0x2000
# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
CONFIG_SPL_STACK_R=y
CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x10000

View File

@ -26,6 +26,7 @@ CONFIG_DEFAULT_FDT_FILE="rockchip/rk3568-evb.dtb"
CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_SPL_MAX_SIZE=0x20000
CONFIG_SPL_PAD_TO=0x7f8000
CONFIG_SPL_BSS_MAX_SIZE=0x4000
# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
CONFIG_SPL_STACK_R=y
CONFIG_SPL_ATF=y

View File

@ -16,6 +16,7 @@ CONFIG_DEBUG_UART=y
CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_SPL_MAX_SIZE=0x2e000
CONFIG_SPL_PAD_TO=0x7f8000
CONFIG_SPL_BSS_MAX_SIZE=0x10000
# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
CONFIG_SPL_STACK_R=y
CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x4000

View File

@ -31,6 +31,7 @@ CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_MISC_INIT_R=y
CONFIG_SPL_MAX_SIZE=0x20000
CONFIG_SPL_PAD_TO=0x7f8000
CONFIG_SPL_BSS_MAX_SIZE=0x4000
CONFIG_SPL_BOOTROM_SUPPORT=y
# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
CONFIG_SPL_STACK_R=y

View File

@ -21,6 +21,7 @@ CONFIG_DEFAULT_FDT_FILE="rk3288-firefly.dtb"
CONFIG_SILENT_CONSOLE=y
CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_SPL_PAD_TO=0x7f8000
CONFIG_SPL_NO_BSS_LIMIT=y
CONFIG_SPL_STACK_R=y
CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x2000
CONFIG_CMD_GPIO=y

View File

@ -17,6 +17,7 @@ CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_MISC_INIT_R=y
CONFIG_SPL_MAX_SIZE=0x2e000
CONFIG_SPL_PAD_TO=0x7f8000
CONFIG_SPL_BSS_MAX_SIZE=0x2000
# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
CONFIG_SPL_STACK_R=y
CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x10000

View File

@ -34,6 +34,7 @@ CONFIG_SYS_CONSOLE_IS_IN_ENV=y
CONFIG_SYS_CONSOLE_INFO_QUIET=y
CONFIG_SPL_MAX_SIZE=0x7000
CONFIG_SPL_PAD_TO=0x40000
CONFIG_SPL_BSS_MAX_SIZE=0x80000
CONFIG_SPL_SYS_MALLOC_SIMPLE=y
# CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR is not set
CONFIG_SPL_NAND_SUPPORT=y

View File

@ -38,6 +38,7 @@ CONFIG_SYS_CONSOLE_INFO_QUIET=y
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_SYS_MALLOC_BOOTPARAMS=y
CONFIG_SPL_MAX_SIZE=0x10000
CONFIG_SPL_BSS_MAX_SIZE=0x10000
CONFIG_SPL_SYS_MALLOC_SIMPLE=y
CONFIG_SPL_NOR_SUPPORT=y
CONFIG_HUSH_PARSER=y

View File

@ -35,6 +35,7 @@ CONFIG_BOOTCOMMAND="if usrbutton; then run flash_self_test; reset; fi;run flash_
CONFIG_LOG=y
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_SPL_MAX_SIZE=0x1f000
CONFIG_SPL_BSS_MAX_SIZE=0x1000
CONFIG_SPL_BOARD_INIT=y
CONFIG_SPL_SYS_MALLOC_SIMPLE=y
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y

View File

@ -29,6 +29,7 @@ CONFIG_ENV_ADDR=0xC0000
CONFIG_FIT=y
CONFIG_BOOTDELAY=3
CONFIG_SPL_MAX_SIZE=0x4000
CONFIG_SPL_NO_BSS_LIMIT=y
CONFIG_SPL_BOARD_INIT=y
CONFIG_SPL_SYS_MALLOC_SIMPLE=y
CONFIG_SPL_RAM_SUPPORT=y

View File

@ -12,6 +12,8 @@ CONFIG_TARGET_HARMONY=y
CONFIG_SYS_LOAD_ADDR=0x1000000
CONFIG_OF_SYSTEM_SETUP=y
CONFIG_SYS_STDIO_DEREGISTER=y
CONFIG_SPL_FOOTPRINT_LIMIT=y
CONFIG_SPL_MAX_FOOTPRINT=0x8000
CONFIG_SYS_PROMPT="Tegra20 (Harmony) # "
CONFIG_SYS_MAXARGS=64
CONFIG_SYS_PBSIZE=2085

View File

@ -25,6 +25,7 @@ CONFIG_SYS_CONSOLE_INFO_QUIET=y
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_SPL_MAX_SIZE=0x22fd0
CONFIG_SPL_BSS_MAX_SIZE=0x4000
CONFIG_SPL_I2C=y
CONFIG_SYS_MAXARGS=32
CONFIG_CMD_TLV_EEPROM=y

View File

@ -32,6 +32,7 @@ CONFIG_BOOTCOMMAND="run ${bootpri} ; run ${bootsec}"
CONFIG_USE_PREBOOT=y
CONFIG_PREBOOT="run prebootcmd"
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_SPL_NO_BSS_LIMIT=y
CONFIG_SPL_BOARD_INIT=y
# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
CONFIG_SPL_SYS_MALLOC_SIMPLE=y

View File

@ -24,6 +24,7 @@ CONFIG_USE_PREBOOT=y
CONFIG_PREBOOT="run prebootcmd"
CONFIG_BOARD_EARLY_INIT_F=y
# CONFIG_SPL_FRAMEWORK is not set
CONFIG_SPL_NO_BSS_LIMIT=y
CONFIG_SPL_BOARD_INIT=y
# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
CONFIG_SPL_SYS_MALLOC_SIMPLE=y

View File

@ -25,6 +25,7 @@ CONFIG_BOOTCOMMAND="run boot${boot-mode}"
CONFIG_DEFAULT_FDT_FILE="ask"
# CONFIG_BOARD_EARLY_INIT_F is not set
CONFIG_SPL_MAX_SIZE=0xe000
CONFIG_SPL_BSS_MAX_SIZE=0x100000
CONFIG_SPL_I2C=y
CONFIG_SPL_USB_HOST=y
CONFIG_SPL_USB_GADGET=y

View File

@ -24,6 +24,7 @@ CONFIG_SPL_LOAD_FIT=y
CONFIG_OF_SYSTEM_SETUP=y
CONFIG_BOARD_LATE_INIT=y
CONFIG_SPL_MAX_SIZE=0x25000
CONFIG_SPL_BSS_MAX_SIZE=0x2000
CONFIG_SPL_BOARD_INIT=y
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300

View File

@ -26,6 +26,7 @@ CONFIG_SPL_LOAD_FIT=y
CONFIG_OF_SYSTEM_SETUP=y
CONFIG_BOARD_LATE_INIT=y
CONFIG_SPL_MAX_SIZE=0x25000
CONFIG_SPL_BSS_MAX_SIZE=0x2000
CONFIG_SPL_BOARD_INIT=y
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300

View File

@ -24,6 +24,7 @@ CONFIG_SPL_FIT_GENERATOR="arch/arm/mach-imx/mkimage_fit_atf.sh"
CONFIG_OF_SYSTEM_SETUP=y
CONFIG_DEFAULT_FDT_FILE="imx8mm-icore-mx8mm-ctouch2.dtb"
CONFIG_SPL_MAX_SIZE=0x25000
CONFIG_SPL_BSS_MAX_SIZE=0x2000
CONFIG_SPL_BOARD_INIT=y
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300

View File

@ -24,6 +24,7 @@ CONFIG_SPL_FIT_GENERATOR="arch/arm/mach-imx/mkimage_fit_atf.sh"
CONFIG_OF_SYSTEM_SETUP=y
CONFIG_DEFAULT_FDT_FILE="imx8mm-icore-mx8mm-edimm2.2.dtb"
CONFIG_SPL_MAX_SIZE=0x25000
CONFIG_SPL_BSS_MAX_SIZE=0x2000
CONFIG_SPL_BOARD_INIT=y
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300

View File

@ -35,6 +35,7 @@ CONFIG_LOG=y
CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_BOARD_LATE_INIT=y
CONFIG_SPL_MAX_SIZE=0x25000
CONFIG_SPL_BSS_MAX_SIZE=0x2000
CONFIG_SPL_BOARD_INIT=y
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300

View File

@ -26,6 +26,7 @@ CONFIG_USE_BOOTCOMMAND=y
CONFIG_BOOTCOMMAND="mmc dev ${mmcdev}; if mmc rescan; then if run loadbootscript; then run bootscript; else if run loadimage; then run mmcboot; else run netboot; fi; fi; fi;"
CONFIG_DEFAULT_FDT_FILE="imx8mm-beacon-kit.dtb"
CONFIG_SPL_MAX_SIZE=0x25000
CONFIG_SPL_BSS_MAX_SIZE=0x2000
CONFIG_SPL_BOARD_INIT=y
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300

View File

@ -42,6 +42,7 @@ CONFIG_SYS_CONSOLE_ENV_OVERWRITE=y
CONFIG_ARCH_MISC_INIT=y
CONFIG_BOARD_LATE_INIT=y
CONFIG_SPL_MAX_SIZE=0x25000
CONFIG_SPL_BSS_MAX_SIZE=0x2000
# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
CONFIG_SPL_LEGACY_IMAGE_FORMAT=y
CONFIG_SPL_LEGACY_IMAGE_CRC_CHECK=y

View File

@ -24,6 +24,7 @@ CONFIG_SPL_LOAD_FIT=y
CONFIG_OF_SYSTEM_SETUP=y
CONFIG_BOARD_LATE_INIT=y
CONFIG_SPL_MAX_SIZE=0x25000
CONFIG_SPL_BSS_MAX_SIZE=0x2000
CONFIG_SPL_BOARD_INIT=y
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300

View File

@ -32,6 +32,7 @@ CONFIG_USE_PREBOOT=y
CONFIG_PREBOOT="gsc wd-disable"
CONFIG_BOARD_LATE_INIT=y
CONFIG_SPL_MAX_SIZE=0x25000
CONFIG_SPL_BSS_MAX_SIZE=0x2000
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300
CONFIG_SPL_I2C=y

View File

@ -33,6 +33,7 @@ CONFIG_BOOTCOMMAND="mmc dev ${mmcdev}; if mmc rescan; then if run loadbootscript
CONFIG_DEFAULT_FDT_FILE="imx8mn-beacon-kit.dtb"
CONFIG_ARCH_MISC_INIT=y
CONFIG_SPL_MAX_SIZE=0x25000
CONFIG_SPL_BSS_MAX_SIZE=0x2000
CONFIG_SPL_BOARD_INIT=y
CONFIG_SPL_BOOTROM_SUPPORT=y
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y

View File

@ -32,6 +32,7 @@ CONFIG_BOOTCOMMAND="mmc dev ${mmcdev}; if mmc rescan; then if run loadbootscript
CONFIG_DEFAULT_FDT_FILE="imx8mn-beacon-kit.dtb"
CONFIG_ARCH_MISC_INIT=y
CONFIG_SPL_MAX_SIZE=0x25000
CONFIG_SPL_BSS_MAX_SIZE=0x2000
CONFIG_SPL_BOARD_INIT=y
CONFIG_SPL_BOOTROM_SUPPORT=y
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y

View File

@ -27,6 +27,7 @@ CONFIG_DEFAULT_FDT_FILE="freescale/imx8mn-bsh-smm-s2.dtb"
CONFIG_ARCH_MISC_INIT=y
CONFIG_BOARD_LATE_INIT=y
CONFIG_SPL_MAX_SIZE=0x25000
CONFIG_SPL_BSS_MAX_SIZE=0x2000
CONFIG_SPL_BOARD_INIT=y
CONFIG_SPL_BOOTROM_SUPPORT=y
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y

View File

@ -28,6 +28,7 @@ CONFIG_DEFAULT_FDT_FILE="freescale/imx8mn-bsh-smm-s2pro.dtb"
CONFIG_ARCH_MISC_INIT=y
CONFIG_BOARD_LATE_INIT=y
CONFIG_SPL_MAX_SIZE=0x25000
CONFIG_SPL_BSS_MAX_SIZE=0x2000
CONFIG_SPL_BOARD_INIT=y
CONFIG_SPL_BOOTROM_SUPPORT=y
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y

View File

@ -26,6 +26,7 @@ CONFIG_OF_SYSTEM_SETUP=y
CONFIG_DEFAULT_FDT_FILE="imx8mn-ddr4-evk.dtb"
CONFIG_BOARD_LATE_INIT=y
CONFIG_SPL_MAX_SIZE=0x25000
CONFIG_SPL_BSS_MAX_SIZE=0x2000
CONFIG_SPL_BOARD_INIT=y
CONFIG_SPL_BOOTROM_SUPPORT=y
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y

View File

@ -27,6 +27,7 @@ CONFIG_DEFAULT_FDT_FILE="imx8mn-evk.dtb"
CONFIG_ARCH_MISC_INIT=y
CONFIG_BOARD_LATE_INIT=y
CONFIG_SPL_MAX_SIZE=0x25000
CONFIG_SPL_BSS_MAX_SIZE=0x2000
CONFIG_SPL_BOARD_INIT=y
CONFIG_SPL_BOOTROM_SUPPORT=y
# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set

View File

@ -28,6 +28,7 @@ CONFIG_OF_SYSTEM_SETUP=y
CONFIG_DEFAULT_FDT_FILE="freescale/imx8mn-var-som-symphony.dtb"
CONFIG_ARCH_MISC_INIT=y
CONFIG_SPL_MAX_SIZE=0x25000
CONFIG_SPL_BSS_MAX_SIZE=0x2000
CONFIG_SPL_BOARD_INIT=y
CONFIG_SPL_BOOTROM_SUPPORT=y
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y

View File

@ -33,6 +33,7 @@ CONFIG_USE_PREBOOT=y
CONFIG_PREBOOT="gsc wd-disable"
CONFIG_BOARD_LATE_INIT=y
CONFIG_SPL_MAX_SIZE=0x25000
CONFIG_SPL_BSS_MAX_SIZE=0x2000
CONFIG_SPL_BOOTROM_SUPPORT=y
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300

View File

@ -45,6 +45,8 @@ CONFIG_CONSOLE_MUX=y
CONFIG_SYS_CONSOLE_ENV_OVERWRITE=y
CONFIG_ARCH_MISC_INIT=y
CONFIG_BOARD_LATE_INIT=y
CONFIG_SPL_MAX_SIZE=0x25000
CONFIG_SPL_BSS_MAX_SIZE=0x400
CONFIG_SPL_BOOTROM_SUPPORT=y
# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y

View File

@ -29,6 +29,7 @@ CONFIG_OF_SYSTEM_SETUP=y
CONFIG_DEFAULT_FDT_FILE="imx8mp-evk.dtb"
CONFIG_BOARD_LATE_INIT=y
CONFIG_SPL_MAX_SIZE=0x26000
CONFIG_SPL_BSS_MAX_SIZE=0x400
CONFIG_SPL_BOARD_INIT=y
CONFIG_SPL_BOOTROM_SUPPORT=y
CONFIG_SPL_SYS_MALLOC_SIMPLE=y

View File

@ -35,6 +35,7 @@ CONFIG_ARCH_MISC_INIT=y
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_BOARD_LATE_INIT=y
CONFIG_SPL_MAX_SIZE=0x26000
CONFIG_SPL_BSS_MAX_SIZE=0x400
CONFIG_SPL_BOARD_INIT=y
CONFIG_SPL_BOOTROM_SUPPORT=y
CONFIG_SPL_SYS_MALLOC_SIMPLE=y

View File

@ -35,6 +35,7 @@ CONFIG_ARCH_MISC_INIT=y
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_BOARD_LATE_INIT=y
CONFIG_SPL_MAX_SIZE=0x26000
CONFIG_SPL_BSS_MAX_SIZE=0x400
CONFIG_SPL_BOARD_INIT=y
CONFIG_SPL_BOOTROM_SUPPORT=y
CONFIG_SPL_SYS_MALLOC_SIMPLE=y

View File

@ -33,6 +33,7 @@ CONFIG_USE_PREBOOT=y
CONFIG_PREBOOT="gsc wd-disable"
CONFIG_BOARD_LATE_INIT=y
CONFIG_SPL_MAX_SIZE=0x26000
CONFIG_SPL_BSS_MAX_SIZE=0x400
CONFIG_SPL_BOOTROM_SUPPORT=y
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300

View File

@ -28,6 +28,7 @@ CONFIG_SPL_LOAD_FIT=y
CONFIG_OF_SYSTEM_SETUP=y
CONFIG_BOARD_LATE_INIT=y
CONFIG_SPL_MAX_SIZE=0x1f000
CONFIG_SPL_BSS_MAX_SIZE=0x2000
CONFIG_SPL_BOARD_INIT=y
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300

View File

@ -30,6 +30,7 @@ CONFIG_OF_SYSTEM_SETUP=y
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_BOARD_LATE_INIT=y
CONFIG_SPL_MAX_SIZE=0x1f000
CONFIG_SPL_BSS_MAX_SIZE=0x2000
CONFIG_SPL_BOARD_INIT=y
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300

View File

@ -32,6 +32,7 @@ CONFIG_USE_BOOTCOMMAND=y
CONFIG_BOOTCOMMAND="mmc dev ${mmcdev}; if mmc rescan; then if run loadbootscript; then run bootscript; else if run loadimage; then run mmcboot; else run netboot; fi; fi; else booti ${loadaddr} - ${fdt_addr}; fi"
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_SPL_MAX_SIZE=0x2b000
CONFIG_SPL_BSS_MAX_SIZE=0x2000
CONFIG_SPL_BOARD_INIT=y
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300

View File

@ -29,6 +29,7 @@ CONFIG_BOOTCOMMAND="mmc dev ${mmcdev}; if mmc rescan; then if run loadbootscript
CONFIG_LOG=y
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_SPL_MAX_SIZE=0x1f000
CONFIG_SPL_BSS_MAX_SIZE=0x1000
CONFIG_SPL_BOARD_INIT=y
CONFIG_SPL_SYS_MALLOC_SIMPLE=y
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y

View File

@ -26,6 +26,7 @@ CONFIG_BOOTCOMMAND="mmc dev ${mmcdev}; if mmc rescan; then if run loadbootscript
CONFIG_LOG=y
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_SPL_MAX_SIZE=0x1f000
CONFIG_SPL_BSS_MAX_SIZE=0x1000
CONFIG_SPL_BOARD_INIT=y
CONFIG_SPL_POWER_DOMAIN=y
CONFIG_SPL_WATCHDOG=y

Some files were not shown because too many files have changed in this diff Show More