leandrof/linux
1
0
Fork 0
forked from Minki/linux
Code Issues Pull Requests Packages Projects Releases Wiki Activity
64be97822b
linux/arch/arm/mach-omap2
History
kishore kadiyala 64be97822b omap4 hsmmc: Update ocr mask for MMC2 for regulator to use 
On OMAP4, MMC2 controller has eMMC which draws power from VAUX regulator
on TWL. Though the eMMC supports dual voltage[1.8v/3v] as per ocr register,
its VCC is fixed at 3V for operation. With this once the mmc core selects
the minimum voltage[1.8] supported based on the ocr value read from OCR register,
eMMC will not get detected. Thus the platform data for MMC2 is updated with ocr
mask and same will be communicated to core which will set the regulator to
always operate at 3V when ever turned ON.

Cc: Tony Lindgren <tony@atomide.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Madhusudhan Chikkature <madhu.cr@ti.com>
Cc: Adrian Hunter <adrian.hunter@nokia.com>
Signed-off-by: Kishore Kadiyala <kishore.kadiyala@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-10-01 16:35:28 -07:00
..
include/mach omap4: control: Add the register definition headers 2010-09-27 14:02:58 -06:00
board-2430sdp.c omap: mmc: extended to pass host capabilities from board file 2010-09-27 10:15:26 -07:00
board-3430sdp.c omap: mmc: extended to pass host capabilities from board file 2010-09-27 10:15:26 -07:00
board-3630sdp.c Merge branch 'devel-map-io' into omap-for-linus 2010-08-04 14:43:45 +03:00
board-4430sdp.c omap4 hsmmc: Update ocr mask for MMC2 for regulator to use 2010-10-01 16:35:28 -07:00
board-am3517evm.c omap3: introduce omap3_map_io 2010-08-04 14:43:18 +03:00
board-apollon.c Merge branch 'devel-map-io' into omap-for-linus 2010-08-04 14:43:45 +03:00
board-cm-t35.c omap: mmc: extended to pass host capabilities from board file 2010-09-27 10:15:26 -07:00
board-cm-t3517.c omap3: cm-t3517: add support for TI HECC 2010-09-27 15:15:35 -07:00
board-devkit8000.c omap: mmc: extended to pass host capabilities from board file 2010-09-27 10:15:26 -07:00
board-flash.c omap3 flash: rename board-sdp-flash.c to be use by other boards 2010-08-02 15:43:29 +03:00
board-generic.c Merge branch 'devel-map-io' into omap-for-linus 2010-08-04 14:43:45 +03:00
board-h4.c Merge branch 'devel-map-io' into omap-for-linus 2010-08-04 14:43:45 +03:00
board-igep0020.c omap: mmc: extended to pass host capabilities from board file 2010-09-27 10:15:26 -07:00
board-ldp.c omap: mmc: extended to pass host capabilities from board file 2010-09-27 10:15:26 -07:00
board-n8x0.c omap: mmc: extended to pass host capabilities from board file 2010-09-27 10:15:26 -07:00
board-omap3beagle.c Merge branch 'devel-boards' into omap-for-linus 2010-09-27 10:19:44 -07:00
board-omap3evm.c omap: mmc: extended to pass host capabilities from board file 2010-09-27 10:15:26 -07:00
board-omap3logic.c ARM: OMAP3LOGIC: Added SMSC Ethernet board support 2010-09-28 11:39:18 -07:00
board-omap3pandora.c omap: pandora: enable twl4030 charger 2010-10-01 16:35:25 -07:00
board-omap3stalker.c omap: mmc: extended to pass host capabilities from board file 2010-09-27 10:15:26 -07:00
board-omap3touchbook.c omap: mmc: extended to pass host capabilities from board file 2010-09-27 10:15:26 -07:00
board-omap4panda.c Merge branch 'devel-boards' into omap-for-linus 2010-09-27 10:19:44 -07:00
board-overo.c omap: mmc: extended to pass host capabilities from board file 2010-09-27 10:15:26 -07:00
board-rx51-peripherals.c omap: mmc: extended to pass host capabilities from board file 2010-09-27 10:15:26 -07:00
board-rx51-sdram.c omap3: rx51: Add SDRAM init 2009-11-22 10:24:33 -08:00
board-rx51-video.c omap: mux: Remove old mux code 2010-07-05 16:31:40 +03:00
board-rx51.c omap3: Unify omap2_set_globals_3[43,6x]x functions 2010-08-04 14:43:18 +03:00
board-zoom2.c Merge branch 'devel-map-io' into omap-for-linus 2010-08-04 14:43:45 +03:00
board-zoom3.c Merge branch 'devel-map-io' into omap-for-linus 2010-08-04 14:43:45 +03:00
board-zoom-debugboard.c omap2/3: Fix DEBUG_LL for omap zoom2/3 2010-05-03 17:53:08 -07:00
board-zoom-peripherals.c omap: mmc: extended to pass host capabilities from board file 2010-09-27 10:15:26 -07:00
clkt2xxx_apll.c OMAP2 PRCM: convert OMAP2 PRCM macros to the _SHIFT/_MASK suffixes 2010-05-20 12:31:04 -06:00
clkt2xxx_dpllcore.c OMAP2xxx clock: move the DPLL+CORE composite clock code into mach-omap2/clkt2xxx_dpllcore.c 2010-01-26 20:13:06 -07:00
clkt2xxx_osc.c OMAP2xxx clock: move osc_clk code into mach-omap2/clkt2xxx_osc.c 2010-01-28 18:13:49 -07:00
clkt2xxx_sys.c OMAP2xxx clock: move sys_clk code into mach-omap2/clkt2xxx_sys.c 2010-01-28 18:13:49 -07:00
clkt2xxx_virt_prcm_set.c OMAP2 clock: fix recursive spinlock attempt when CONFIG_CPU_FREQ=y 2010-05-20 12:31:14 -06:00
clkt34xx_dpll3m2.c OMAP3/4 clock: split into per-chip family files 2010-02-24 12:16:15 -07:00
clkt_clksel.c OMAP2+ clock: clean up clkt_clksel.c 2010-05-20 12:31:06 -06:00
clkt_dpll.c OMAP2/3/4 clock: fix DPLL multiplier value errors; also copyrights, includes, documentation 2010-02-24 12:15:03 -07:00
clock2xxx.c OMAP2/3 clock: combine OMAP2 & 3 boot-time MPU rate change code 2010-02-24 17:45:15 -07:00
clock2xxx.h OMAP2 clock: split OMAP2420, OMAP2430 clock data into their own files 2010-02-24 12:29:42 -07:00
clock3xxx_data.c omap: crypto: updates to enable omap aes 2010-09-27 10:15:25 -07:00
clock3xxx.c OMAP2/3 clock: combine OMAP2 & 3 boot-time MPU rate change code 2010-02-24 17:45:15 -07:00
clock3xxx.h OMAP3/4 clock: split into per-chip family files 2010-02-24 12:16:15 -07:00
clock34xx.c OMAP3/4 clock: split into per-chip family files 2010-02-24 12:16:15 -07:00
clock34xx.h OMAP3/4 clock: split into per-chip family files 2010-02-24 12:16:15 -07:00
clock36xx.c OMAP3/4 clock: split into per-chip family files 2010-02-24 12:16:15 -07:00
clock36xx.h OMAP3/4 clock: split into per-chip family files 2010-02-24 12:16:15 -07:00
clock44xx_data.c OMAP4: clocks: Fix ES2 clock issues 2010-09-27 14:02:56 -06:00
clock44xx.h OMAP3/4 clock: split into per-chip family files 2010-02-24 12:16:15 -07:00
clock2420_data.c omap: crypto: updates to enable omap aes 2010-09-27 10:15:25 -07:00
clock2430_data.c omap: crypto: updates to enable omap aes 2010-09-27 10:15:25 -07:00
clock2430.c OMAP2 clock: split OMAP2420, OMAP2430 clock data into their own files 2010-02-24 12:29:42 -07:00
clock3517.c OMAP3/4 clock: split into per-chip family files 2010-02-24 12:16:15 -07:00
clock3517.h OMAP3/4 clock: split into per-chip family files 2010-02-24 12:16:15 -07:00
clock_common_data.c OMAP3 clock: rename RATE_IN_343X, RATE_IN_3430ES2 to match reality 2010-05-20 12:31:07 -06:00
clock.c OMAP2+ clock: clean up clkt_clksel.c 2010-05-20 12:31:06 -06:00
clock.h OMAP2+ clock: clean up clkt_clksel.c 2010-05-20 12:31:06 -06:00
clockdomain.c OMAP clockdomain: initialize clockdomain registers when the clockdomain layer starts 2010-09-23 17:14:12 -07:00
clockdomains44xx.h OMAP4: PRM: Remove MPU internal code name and apply PRCM naming convention 2010-05-20 12:31:11 -06:00
clockdomains.h omap2: Convert ARCH_OMAP24XX to ARCH_OMAP2 2010-02-15 09:27:01 -08:00
cm4xxx.c OMAP4: PM: Declare idle modules as functional too 2010-09-24 10:23:18 -06:00
cm44xx.h OMAP4: PM: Define additional registers for ES2 2010-09-27 14:02:56 -06:00
cm-regbits-24xx.h OMAP2 PRCM: convert OMAP2 PRCM macros to the _SHIFT/_MASK suffixes 2010-05-20 12:31:04 -06:00
cm-regbits-34xx.h OMAP3 PRCM: convert OMAP3 PRCM macros to the _SHIFT/_MASK suffixes 2010-05-20 12:31:05 -06:00
cm-regbits-44xx.h OMAP4: CM & PRM: Update PRCM register bitshifts and masks for ES2 2010-09-27 14:02:55 -06:00
cm.c OMAP24xx: CM: fix mask used for checking IDLEST status 2010-07-26 16:34:28 -06:00
cm.h OMAP4: hwmod & CM: Implement the omap4_cm_wait_module_ready function 2010-05-20 12:31:08 -06:00
control.c omap4: control: Add accessor api's for pad control module 2010-09-27 14:02:57 -06:00
cpuidle34xx.c OMAP3: PM: move device-specific special cases from PM core into CPUidle 2010-09-23 17:13:50 -07:00
devices.c omap4 hsmmc: Register offset handling 2010-10-01 16:35:28 -07:00
dpll3xxx.c fix typos concerning "hierarchy" 2010-06-16 18:03:14 +02:00
emu.c omap2/3: Fix initcalls for multi-omap 2010-02-15 09:27:05 -08:00
gpmc-nand.c omap3 nand: cleanup virtual address usages 2010-08-02 15:30:38 +03:00
gpmc-onenand.c omap: headers: Move remaining headers from include/mach to include/plat 2009-10-20 09:40:47 -07:00
gpmc-smc91x.c omap: use smc91x_platdata to setup smc91x 2009-12-11 16:16:33 -08:00
gpmc-smsc911x.c ARM: OMAP3LOGIC: Add generic smsc911x support when connected to GPMC 2010-09-28 11:39:18 -07:00
gpmc.c omap3 nand: cleanup virtual address usages 2010-08-02 15:30:38 +03:00
hsmmc.c omap4 hsmmc: Register offset handling 2010-10-01 16:35:28 -07:00
hsmmc.h omap: mmc: extended to pass host capabilities from board file 2010-09-27 10:15:26 -07:00
i2c.c omap: mux: Convert 2420 platform init code to use new mux code 2010-07-05 16:31:40 +03:00
id.c omap2/3: Update revision identification 2010-10-01 16:35:24 -07:00
io.c OMAP4: hwmod: Add initial data for OMAP4430 ES1 & ES2 2010-09-23 17:14:15 -07:00
iommu2.c omap iommu: move iommu_disable at fault to the above layer 2010-06-29 07:55:07 +03:00
irq.c OMAP2/3: IRQ: ensure valid base address 2010-02-03 08:48:06 -08:00
Kconfig ARM: OMAP3LOGIC: Adding LogicPD OMAP3 board support 2010-09-28 09:58:41 -07:00
mailbox.c arm: remove cast from void* 2010-09-28 09:54:28 -07:00
Makefile ARM: OMAP3LOGIC: Add generic smsc911x support when connected to GPMC 2010-09-28 11:39:18 -07:00
Makefile.boot
mcbsp.c omap2: McBSP: Remove mux code for OMAP2420 McBSP2 and do cleanups 2010-09-27 10:15:25 -07:00
mux34xx.c omap: mux: Remove unncessary parens from mux34xx.c 2010-07-05 16:31:36 +03:00
mux34xx.h omap: mux: Add 36xx CBP package support 2009-12-11 16:16:33 -08:00
mux2420.c omap: mux: Add data for 2420 2010-07-05 16:31:36 +03:00
mux2420.h omap: mux: Add data for 2420 2010-07-05 16:31:36 +03:00
mux2430.c omap: mux: Add data for 2430 2010-07-05 16:31:36 +03:00
mux2430.h omap: mux: Add data for 2430 2010-07-05 16:31:36 +03:00
mux.c omap: Fix omap_mux_init_signal not to trash muxname 2010-10-01 16:35:24 -07:00
mux.h omap: Fix omap_mux_init_signal not to trash muxname 2010-10-01 16:35:24 -07:00
omap4-common.c omap4: l2x0: Fix init parameter for es2.0 2010-09-24 11:30:18 +05:30
omap44xx-smc.S omap4: Add smc API to read AuxCoreBoot0 register 2010-08-02 13:18:18 +03:00
omap_hwmod_3xxx_data.c OMAP3: hwmod data: add data for OMAP3 IVA2 2010-07-26 16:34:32 -06:00
omap_hwmod_44xx_data.c OMAP4: hwmod: Add initial data for OMAP4430 ES1 & ES2 2010-09-23 17:14:15 -07:00
omap_hwmod_2420_data.c OMAP2: hwmod data: add IVA1 (2420), IVA2 (2430) hwmods 2010-07-26 16:34:33 -06:00
omap_hwmod_2430_data.c OMAP2: hwmod data: add IVA1 (2420), IVA2 (2430) hwmods 2010-07-26 16:34:33 -06:00
omap_hwmod_common_data.c OMAP: hwmod data: add class for IVA hwmods 2010-07-26 16:34:31 -06:00
omap_hwmod_common_data.h OMAP: hwmod data: add class for IVA hwmods 2010-07-26 16:34:31 -06:00
omap_hwmod.c OMAP: hwmod: Set autoidle after smartidle during _sysc_enable 2010-09-24 10:23:19 -06:00
omap-headsmp.S omap4: Add smc API to read AuxCoreBoot0 register 2010-08-02 13:18:18 +03:00
omap-hotplug.c omap4: hotplug: Add basic CPU hotplug support 2010-08-02 13:18:19 +03:00
omap-iommu.c omap iommu: update ducati mmu irq define name 2010-06-29 07:55:08 +03:00
omap-smp.c omap: Fix sev instruction usage for multi-omap 2010-08-16 09:22:04 +03:00
opp2xxx.h omap2/3: Multiboot compile fixes to compile in omap2 and omap3 2010-02-15 09:26:55 -08:00
opp2420_data.c OMAP2xxx OPP: clean up comments in OPP data 2010-01-08 15:23:15 -07:00
opp2430_data.c OMAP2xxx OPP: clean up comments in OPP data 2010-01-08 15:23:15 -07:00
pm24xx.c omap: mux: Remove old mux code 2010-07-05 16:31:40 +03:00
pm34xx.c OMAP clockdomain: initialize clockdomain registers when the clockdomain layer starts 2010-09-23 17:14:12 -07:00
pm44xx.c omap4: suspend: Add basic system suspend support 2010-08-02 13:18:18 +03:00
pm_bus.c OMAP2+: PM: initial runtime PM core support 2010-09-21 11:51:23 -07:00
pm-debug.c omap: pm-debug: Enable wakeup_timer_milliseconds debugfs entry 2010-09-23 17:14:10 -07:00
pm.c OMAP4: pm: Change l3_main to l3_main_1 during bus device init 2010-09-23 17:14:16 -07:00
pm.h omap: pm: Move set_pwrdm_state routine to common pm.c 2010-09-23 17:14:11 -07:00
powerdomain.c OMAP2: powerdomain: Add break in switch statement 2010-08-03 10:21:07 +03:00
powerdomains24xx.h omap2: Convert ARCH_OMAP24XX to ARCH_OMAP2 2010-02-15 09:27:01 -08:00
powerdomains34xx.h omap: 3630: disable TLL SAR on 3630 ES1 2010-08-04 14:43:52 +03:00
powerdomains44xx.h OMAP4: powerdomain: Update DSS logic state for ES2 2010-09-27 14:02:56 -06:00
powerdomains.h OMAP2+ powerdomains/clockdomains: prepare for multi-OMAP configs 2010-01-29 10:14:23 -07:00
prcm-common.h OMAP4: PRCM: Remove duplicate definition of base addresses 2010-05-20 12:31:12 -06:00
prcm.c OMAP4: prcm: Add temporarily helper functions for rmw and read inside the PRM 2010-09-21 15:11:42 -06:00
prm2xxx_3xxx.c OMAP2/3: PRM: add module hard reset support 2010-09-21 15:12:40 -06:00
prm44xx.c OMAP4: PRM: add module hard reset support 2010-09-21 15:12:21 -06:00
prm44xx.h OMAP4: PM: Define additional registers for ES2 2010-09-27 14:02:56 -06:00
prm-regbits-24xx.h OMAP2 PRCM: convert OMAP2 PRCM macros to the _SHIFT/_MASK suffixes 2010-05-20 12:31:04 -06:00
prm-regbits-34xx.h OMAP3 PRCM: convert OMAP3 PRCM macros to the _SHIFT/_MASK suffixes 2010-05-20 12:31:05 -06:00
prm-regbits-44xx.h OMAP4: CM & PRM: Update PRCM register bitshifts and masks for ES2 2010-09-27 14:02:55 -06:00
prm.h OMAP2/3: PRM: add module hard reset support 2010-09-21 15:12:40 -06:00
sdram-hynix-h8mbx00u0mer-0em.h omap3: zoom: Introduce zoom3 board support 2009-11-22 10:24:33 -08:00
sdram-micron-mt46h32m32lf-6.h omap: headers: Move remaining headers from include/mach to include/plat 2009-10-20 09:40:47 -07:00
sdram-numonyx-m65kxxxxam.h omap3: SDRC: add timing data for Numonyx M65KxxxxAM 2010-02-17 17:23:20 -08:00
sdram-qimonda-hyb18m512160af-6.h omap: headers: Move remaining headers from include/mach to include/plat 2009-10-20 09:40:47 -07:00
sdrc2xxx.c omap: headers: Move remaining headers from include/mach to include/plat 2009-10-20 09:40:47 -07:00
sdrc.c omap2/3/4: ioremap omap_globals module 2010-02-23 10:57:40 -08:00
sdrc.h OMAP2 clock: convert clock24xx.h to clock2xxx_data.c, opp2xxx* 2009-12-11 16:16:00 -07:00
serial.c omap2/3/4: serial: errata i202: fix for MDR1 access 2010-08-02 13:18:12 +03:00
sleep24xx.S omap: headers: Move remaining headers from include/mach to include/plat 2009-10-20 09:40:47 -07:00
sleep34xx.S fix typos concerning "acquire" 2010-06-16 18:03:15 +02:00
sram34xx.S omap3: Prevent SDRC deadlock when L3 is changing frequency 2010-09-27 14:02:59 -06:00
sram242x.S omap: Split OMAP2_IO_ADDRESS to L3 and L4 2009-10-19 15:25:31 -07:00
sram243x.S omap: Split OMAP2_IO_ADDRESS to L3 and L4 2009-10-19 15:25:31 -07:00
timer-gp.c omap: Fix CONFIG_LOCAL_TIMERS initialization for multi-omap 2010-09-20 14:53:15 -07:00
timer-mpu.c omap4: Use irq line defines from irq-44xx.h 2010-02-23 15:29:08 -08:00
usb-ehci.c omap: mux: Remove old mux code 2010-07-05 16:31:40 +03:00
usb-fs.c omap: mux: Make omap2 FS USB code use new mux functions 2010-07-05 16:31:38 +03:00
usb-musb.c omap: mux: Remove old mux code 2010-07-05 16:31:40 +03:00
usb-tusb6010.c omap: mux: Convert 2420 platform init code to use new mux code 2010-07-05 16:31:40 +03:00