leandrof/linux
1
0
Fork 0
forked from Minki/linux
Code Issues Pull Requests Packages Projects Releases Wiki Activity
64be97822b
linux/arch/arm/mach-omap2/board-4430sdp.c
kishore kadiyala 64be97822b omap4 hsmmc: Update ocr mask for MMC2 for regulator to use 
On OMAP4, MMC2 controller has eMMC which draws power from VAUX regulator
on TWL. Though the eMMC supports dual voltage[1.8v/3v] as per ocr register,
its VCC is fixed at 3V for operation. With this once the mmc core selects
the minimum voltage[1.8] supported based on the ocr value read from OCR register,
eMMC will not get detected. Thus the platform data for MMC2 is updated with ocr
mask and same will be communicated to core which will set the regulator to
always operate at 3V when ever turned ON.

Cc: Tony Lindgren <tony@atomide.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Madhusudhan Chikkature <madhu.cr@ti.com>
Cc: Adrian Hunter <adrian.hunter@nokia.com>
Signed-off-by: Kishore Kadiyala <kishore.kadiyala@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-10-01 16:35:28 -07:00

544 lines
12 KiB
C
Raw Blame History

/*
* Board support file for OMAP4430 SDP.
*
* Copyright (C) 2009 Texas Instruments
*
* Author: Santosh Shilimkar <santosh.shilimkar@ti.com>
*
* Based on mach-omap2/board-3430sdp.c
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/gpio.h>
#include <linux/usb/otg.h>
#include <linux/spi/spi.h>
#include <linux/i2c/twl.h>
#include <linux/gpio_keys.h>
#include <linux/regulator/machine.h>
#include <linux/leds.h>
#include <mach/hardware.h>
#include <mach/omap4-common.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <plat/board.h>
#include <plat/common.h>
#include <plat/control.h>
#include <plat/timer-gp.h>
#include <plat/usb.h>
#include <plat/mmc.h>
#include "hsmmc.h"
#define ETH_KS8851_IRQ 34
#define ETH_KS8851_POWER_ON 48
#define ETH_KS8851_QUART 138
#define OMAP4_SFH7741_SENSOR_OUTPUT_GPIO 184
#define OMAP4_SFH7741_ENABLE_GPIO 188
static struct gpio_led sdp4430_gpio_leds[] = {
{
.name = "omap4:green:debug0",
.gpio = 61,
},
{
.name = "omap4:green:debug1",
.gpio = 30,
},
{
.name = "omap4:green:debug2",
.gpio = 7,
},
{
.name = "omap4:green:debug3",
.gpio = 8,
},
{
.name = "omap4:green:debug4",
.gpio = 50,
},
{
.name = "omap4:blue:user",
.gpio = 169,
},
{
.name = "omap4:red:user",
.gpio = 170,
},
{
.name = "omap4:green:user",
.gpio = 139,
},
};
static struct gpio_keys_button sdp4430_gpio_keys[] = {
{
.desc = "Proximity Sensor",
.type = EV_SW,
.code = SW_FRONT_PROXIMITY,
.gpio = OMAP4_SFH7741_SENSOR_OUTPUT_GPIO,
.active_low = 0,
}
};
static struct gpio_led_platform_data sdp4430_led_data = {
.leds = sdp4430_gpio_leds,
.num_leds = ARRAY_SIZE(sdp4430_gpio_leds),
};
static int omap_prox_activate(struct device *dev)
{
gpio_set_value(OMAP4_SFH7741_ENABLE_GPIO , 1);
return 0;
}
static void omap_prox_deactivate(struct device *dev)
{
gpio_set_value(OMAP4_SFH7741_ENABLE_GPIO , 0);
}
static struct gpio_keys_platform_data sdp4430_gpio_keys_data = {
.buttons = sdp4430_gpio_keys,
.nbuttons = ARRAY_SIZE(sdp4430_gpio_keys),
.enable = omap_prox_activate,
.disable = omap_prox_deactivate,
};
static struct platform_device sdp4430_gpio_keys_device = {
.name = "gpio-keys",
.id = -1,
.dev = {
.platform_data = &sdp4430_gpio_keys_data,
},
};
static struct platform_device sdp4430_leds_gpio = {
.name = "leds-gpio",
.id = -1,
.dev = {
.platform_data = &sdp4430_led_data,
},
};
static struct spi_board_info sdp4430_spi_board_info[] __initdata = {
{
.modalias = "ks8851",
.bus_num = 1,
.chip_select = 0,
.max_speed_hz = 24000000,
.irq = ETH_KS8851_IRQ,
},
};
static int omap_ethernet_init(void)
{
int status;
/* Request of GPIO lines */
status = gpio_request(ETH_KS8851_POWER_ON, "eth_power");
if (status) {
pr_err("Cannot request GPIO %d\n", ETH_KS8851_POWER_ON);
return status;
}
status = gpio_request(ETH_KS8851_QUART, "quart");
if (status) {
pr_err("Cannot request GPIO %d\n", ETH_KS8851_QUART);
goto error1;
}
status = gpio_request(ETH_KS8851_IRQ, "eth_irq");
if (status) {
pr_err("Cannot request GPIO %d\n", ETH_KS8851_IRQ);
goto error2;
}
/* Configuration of requested GPIO lines */
status = gpio_direction_output(ETH_KS8851_POWER_ON, 1);
if (status) {
pr_err("Cannot set output GPIO %d\n", ETH_KS8851_IRQ);
goto error3;
}
status = gpio_direction_output(ETH_KS8851_QUART, 1);
if (status) {
pr_err("Cannot set output GPIO %d\n", ETH_KS8851_QUART);
goto error3;
}
status = gpio_direction_input(ETH_KS8851_IRQ);
if (status) {
pr_err("Cannot set input GPIO %d\n", ETH_KS8851_IRQ);
goto error3;
}
return 0;
error3:
gpio_free(ETH_KS8851_IRQ);
error2:
gpio_free(ETH_KS8851_QUART);
error1:
gpio_free(ETH_KS8851_POWER_ON);
return status;
}
static struct platform_device sdp4430_lcd_device = {
.name = "sdp4430_lcd",
.id = -1,
};
static struct platform_device *sdp4430_devices[] __initdata = {
&sdp4430_lcd_device,
&sdp4430_gpio_keys_device,
&sdp4430_leds_gpio,
};
static struct omap_lcd_config sdp4430_lcd_config __initdata = {
.ctrl_name = "internal",
};
static struct omap_board_config_kernel sdp4430_config[] __initdata = {
{ OMAP_TAG_LCD, &sdp4430_lcd_config },
};
static void __init omap_4430sdp_init_irq(void)
{
omap_board_config = sdp4430_config;
omap_board_config_size = ARRAY_SIZE(sdp4430_config);
omap2_init_common_hw(NULL, NULL);
#ifdef CONFIG_OMAP_32K_TIMER
omap2_gp_clockevent_set_gptimer(1);
#endif
gic_init_irq();
omap_gpio_init();
}
static struct omap_musb_board_data musb_board_data = {
.interface_type = MUSB_INTERFACE_UTMI,
.mode = MUSB_PERIPHERAL,
.power = 100,
};
static struct omap2_hsmmc_info mmc[] = {
{
.mmc = 1,
.caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
.gpio_wp = -EINVAL,
},
{
.mmc = 2,
.caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
.gpio_cd = -EINVAL,
.gpio_wp = -EINVAL,
.nonremovable = true,
.ocr_mask = MMC_VDD_29_30,
},
{} /* Terminator */
};
static struct regulator_consumer_supply sdp4430_vaux_supply[] = {
{
.supply = "vmmc",
.dev_name = "mmci-omap-hs.1",
},
};
static struct regulator_consumer_supply sdp4430_vmmc_supply[] = {
{
.supply = "vmmc",
.dev_name = "mmci-omap-hs.0",
},
};
static int omap4_twl6030_hsmmc_late_init(struct device *dev)
{
int ret = 0;
struct platform_device *pdev = container_of(dev,
struct platform_device, dev);
struct omap_mmc_platform_data *pdata = dev->platform_data;
/* Setting MMC1 Card detect Irq */
if (pdev->id == 0)
pdata->slots[0].card_detect_irq = TWL6030_IRQ_BASE +
MMCDETECT_INTR_OFFSET;
return ret;
}
static __init void omap4_twl6030_hsmmc_set_late_init(struct device *dev)
{
struct omap_mmc_platform_data *pdata;
/* dev can be null if CONFIG_MMC_OMAP_HS is not set */
if (!dev) {
pr_err("Failed %s\n", __func__);
return;
}
pdata = dev->platform_data;
pdata->init = omap4_twl6030_hsmmc_late_init;
}
static int __init omap4_twl6030_hsmmc_init(struct omap2_hsmmc_info *controllers)
{
struct omap2_hsmmc_info *c;
omap2_hsmmc_init(controllers);
for (c = controllers; c->mmc; c++)
omap4_twl6030_hsmmc_set_late_init(c->dev);
return 0;
}
static struct regulator_init_data sdp4430_vaux1 = {
.constraints = {
.min_uV = 1000000,
.max_uV = 3000000,
.apply_uV = true,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
| REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = 1,
.consumer_supplies = sdp4430_vaux_supply,
};
static struct regulator_init_data sdp4430_vaux2 = {
.constraints = {
.min_uV = 1200000,
.max_uV = 2800000,
.apply_uV = true,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
| REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
};
static struct regulator_init_data sdp4430_vaux3 = {
.constraints = {
.min_uV = 1000000,
.max_uV = 3000000,
.apply_uV = true,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
| REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
};
/* VMMC1 for MMC1 card */
static struct regulator_init_data sdp4430_vmmc = {
.constraints = {
.min_uV = 1200000,
.max_uV = 3000000,
.apply_uV = true,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
| REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = 1,
.consumer_supplies = sdp4430_vmmc_supply,
};
static struct regulator_init_data sdp4430_vpp = {
.constraints = {
.min_uV = 1800000,
.max_uV = 2500000,
.apply_uV = true,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
| REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
};
static struct regulator_init_data sdp4430_vusim = {
.constraints = {
.min_uV = 1200000,
.max_uV = 2900000,
.apply_uV = true,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
| REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
};
static struct regulator_init_data sdp4430_vana = {
.constraints = {
.min_uV = 2100000,
.max_uV = 2100000,
.apply_uV = true,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
};
static struct regulator_init_data sdp4430_vcxio = {
.constraints = {
.min_uV = 1800000,
.max_uV = 1800000,
.apply_uV = true,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
};
static struct regulator_init_data sdp4430_vdac = {
.constraints = {
.min_uV = 1800000,
.max_uV = 1800000,
.apply_uV = true,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
};
static struct regulator_init_data sdp4430_vusb = {
.constraints = {
.min_uV = 3300000,
.max_uV = 3300000,
.apply_uV = true,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
};
static struct twl4030_platform_data sdp4430_twldata = {
.irq_base = TWL6030_IRQ_BASE,
.irq_end = TWL6030_IRQ_END,
/* Regulators */
.vmmc = &sdp4430_vmmc,
.vpp = &sdp4430_vpp,
.vusim = &sdp4430_vusim,
.vana = &sdp4430_vana,
.vcxio = &sdp4430_vcxio,
.vdac = &sdp4430_vdac,
.vusb = &sdp4430_vusb,
.vaux1 = &sdp4430_vaux1,
.vaux2 = &sdp4430_vaux2,
.vaux3 = &sdp4430_vaux3,
};
static struct i2c_board_info __initdata sdp4430_i2c_boardinfo[] = {
{
I2C_BOARD_INFO("twl6030", 0x48),
.flags = I2C_CLIENT_WAKE,
.irq = OMAP44XX_IRQ_SYS_1N,
.platform_data = &sdp4430_twldata,
},
};
static struct i2c_board_info __initdata sdp4430_i2c_3_boardinfo[] = {
{
I2C_BOARD_INFO("tmp105", 0x48),
},
};
static struct i2c_board_info __initdata sdp4430_i2c_4_boardinfo[] = {
{
I2C_BOARD_INFO("hmc5843", 0x1e),
},
};
static int __init omap4_i2c_init(void)
{
/*
* Phoenix Audio IC needs I2C1 to
* start with 400 KHz or less
*/
omap_register_i2c_bus(1, 400, sdp4430_i2c_boardinfo,
ARRAY_SIZE(sdp4430_i2c_boardinfo));
omap_register_i2c_bus(2, 400, NULL, 0);
omap_register_i2c_bus(3, 400, sdp4430_i2c_3_boardinfo,
ARRAY_SIZE(sdp4430_i2c_3_boardinfo));
omap_register_i2c_bus(4, 400, sdp4430_i2c_4_boardinfo,
ARRAY_SIZE(sdp4430_i2c_4_boardinfo));
return 0;
}
static void __init omap_sfh7741prox_init(void)
{
int error;
error = gpio_request(OMAP4_SFH7741_ENABLE_GPIO, "sfh7741");
if (error < 0) {
pr_err("%s:failed to request GPIO %d, error %d\n",
__func__, OMAP4_SFH7741_ENABLE_GPIO, error);
return;
}
error = gpio_direction_output(OMAP4_SFH7741_ENABLE_GPIO , 0);
if (error < 0) {
pr_err("%s: GPIO configuration failed: GPIO %d,error %d\n",
__func__, OMAP4_SFH7741_ENABLE_GPIO, error);
gpio_free(OMAP4_SFH7741_ENABLE_GPIO);
}
}
static void __init omap_4430sdp_init(void)
{
int status;
omap4_i2c_init();
omap_sfh7741prox_init();
platform_add_devices(sdp4430_devices, ARRAY_SIZE(sdp4430_devices));
omap_serial_init();
omap4_twl6030_hsmmc_init(mmc);
/* OMAP4 SDP uses internal transceiver so register nop transceiver */
usb_nop_xceiv_register();
/* FIXME: allow multi-omap to boot until musb is updated for omap4 */
if (!cpu_is_omap44xx())
usb_musb_init(&musb_board_data);
status = omap_ethernet_init();
if (status) {
pr_err("Ethernet initialization failed: %d\n", status);
} else {
sdp4430_spi_board_info[0].irq = gpio_to_irq(ETH_KS8851_IRQ);
spi_register_board_info(sdp4430_spi_board_info,
ARRAY_SIZE(sdp4430_spi_board_info));
}
}
static void __init omap_4430sdp_map_io(void)
{
omap2_set_globals_443x();
omap44xx_map_common_io();
}
MACHINE_START(OMAP_4430SDP, "OMAP4430 4430SDP board")
/* Maintainer: Santosh Shilimkar - Texas Instruments Inc */
.phys_io = 0x48000000,
.io_pg_offst = ((0xfa000000) >> 18) & 0xfffc,
.boot_params = 0x80000100,
.map_io = omap_4430sdp_map_io,
.reserve = omap_reserve,
.init_irq = omap_4430sdp_init_irq,
.init_machine = omap_4430sdp_init,
.timer = &omap_timer,
MACHINE_END
Reference in New Issue View Git Blame Copy Permalink