The code fixes in this round are all for the Texas Instruments OMAP
platform, addressing several regressions related to the ti-sysc
interconnect changes that was merged in linux-5.11 and one recently
introduced RCU usage warning.
Tero Kristo updates his maintainer file entries as he is changing
to a new employer.
The other changes are for devicetree files across eight different
platforms:
TI OMAP:
- multiple gpio related one-line fixes
Allwinner/sunxi:
- ARM: dts: sun7i: a20: bananapro: Fix ethernet phy-mode
- soc: sunxi: mbus: Remove DE2 display engine compatibles
NXP lpc32xx:
- ARM: dts: lpc32xx: Revert set default clock rate of HCLK PLL
STMicroelectronics stm32
- multiple minor fixes for DHCOM/DHCOR boards
NXP Layerscape:
- Fix DCFG address range on LS1046A SoC
Amlogic meson:
- fix reboot issue on odroid C4
- revert an ethernet change that caused a regression
- meson-g12: Set FL-adj property value
Rockchip:
- multiple minor fixes on 64-bit rockchip machines
Qualcomm:
- Regression fixes for Lenovo Yoga touchpad and for
interconnect configuration
- Boot fixes for 'LPASS' clock configuration on two machines
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----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=dXiS
-----END PGP SIGNATURE-----
Merge tag 'arm-soc-fixes-v5.11-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"The code fixes in this round are all for the Texas Instruments OMAP
platform, addressing several regressions related to the ti-sysc
interconnect changes that was merged in linux-5.11 and one recently
introduced RCU usage warning.
Tero Kristo updates his maintainer file entries as he is changing to a
new employer.
The other changes are for devicetree files across eight different
platforms:
TI OMAP:
- multiple gpio related one-line fixes
Allwinner/sunxi:
- ARM: dts: sun7i: a20: bananapro: Fix ethernet phy-mode
- soc: sunxi: mbus: Remove DE2 display engine compatibles
NXP lpc32xx:
- ARM: dts: lpc32xx: Revert set default clock rate of HCLK PLL
STMicroelectronics stm32
- multiple minor fixes for DHCOM/DHCOR boards
NXP Layerscape:
- Fix DCFG address range on LS1046A SoC
Amlogic meson:
- fix reboot issue on odroid C4
- revert an ethernet change that caused a regression
- meson-g12: Set FL-adj property value
Rockchip:
- multiple minor fixes on 64-bit rockchip machines
Qualcomm:
- Regression fixes for Lenovo Yoga touchpad and for interconnect
configuration
- Boot fixes for 'LPASS' clock configuration on two machines"
* tag 'arm-soc-fixes-v5.11-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (31 commits)
ARM: dts: lpc32xx: Revert set default clock rate of HCLK PLL
ARM: dts: sun7i: a20: bananapro: Fix ethernet phy-mode
arm64: dts: ls1046a: fix dcfg address range
soc: sunxi: mbus: Remove DE2 display engine compatibles
arm64: dts: meson: switch TFLASH_VDD_EN pin to open drain on Odroid-C4
Revert "arm64: dts: amlogic: add missing ethernet reset ID"
arm64: dts: rockchip: Disable display for NanoPi R2S
ARM: dts: omap4-droid4: Fix lost keypad slide interrupts for droid4
arm64: dts: rockchip: remove interrupt-names property from rk3399 vdec node
drivers: bus: simple-pm-bus: Fix compatibility with simple-bus for auxdata
ARM: OMAP2+: Fix booting for am335x after moving to simple-pm-bus
ARM: OMAP2+: Fix suspcious RCU usage splats for omap_enter_idle_coupled
ARM: dts: stm32: Fix GPIO hog flags on DHCOM DRC02
ARM: dts: stm32: Fix GPIO hog flags on DHCOM PicoITX
ARM: dts: stm32: Fix GPIO hog names on DHCOM
ARM: dts: stm32: Disable optional TSC2004 on DRC02 board
ARM: dts: stm32: Disable WP on DHCOM uSD slot
ARM: dts: stm32: Connect card-detect signal on DHCOM
ARM: dts: stm32: Fix polarity of the DH DRC02 uSD card detect
arm64: dts: qcom: sdm845: Reserve LPASS clocks in gcc
...
In order to ensure the module loader does not get confused if a symbol
is exported in EL2 nVHE code (as will be the case when we will compile
e.g. lib/memset.S into the EL2 object), make sure to stub all exports
using __DISABLE_EXPORTS in the nvhe folder.
Suggested-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Quentin Perret <qperret@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210203141931.615898-3-qperret@google.com
Instead of using a bunch of magic numbers, use the existing definitions
that have been added since 8673e02e58 ("arm64: perf: Add support
for ARMv8.5-PMU 64-bit counters")
Reviewed-by: Alexandru Elisei <alexandru.elisei@arm.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Upgrading the PMU code from ARMv8.1 to ARMv8.4 turns out to be
pretty easy. All that is required is support for PMMIR_EL1, which
is read-only, and for which returning 0 is a valid option as long
as we don't advertise STALL_SLOT as an implemented event.
Let's just do that and adjust what we return to the guest.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Let's not pretend we support anything but ARMv8.0 as far as the
debug architecture is concerned.
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Alexandru Elisei <alexandru.elisei@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Our current ID register filtering is starting to be a mess of if()
statements, and isn't going to get any saner.
Let's turn it into a switch(), which has a chance of being more
readable, and introduce a FEATURE() macro that allows easy generation
of feature masks.
No functionnal change intended.
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Alexandru Elisei <alexandru.elisei@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Despite advertising support for AArch32 PMUv3p1, we fail to handle
the PMCEID{2,3} registers, which conveniently alias with the top
bits of PMCEID{0,1}_EL1.
Implement these registers with the usual AA32(HI/LO) aliasing
mechanism.
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
We shouldn't expose *any* PMU capability when no PMU has been
configured for this VM.
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Alexandru Elisei <alexandru.elisei@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
The AArch32 CP14 DBGDIDR has bit 15 set to RES1, which our current
emulation doesn't set. Just add the missing bit.
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Alexandru Elisei <alexandru.elisei@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
The dt-bindings/power/qcom-rpmpd.h header is being included in this
DT but the RPMPD OPP table declarations were using open-coded values:
use the definitions found in the aforementioned header.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Link: https://lore.kernel.org/r/20210109160759.186990-1-angelogioacchino.delregno@somainline.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Some components (like PCIe) are not used on all devices and
with a certain firmware configuration they might end up triggering
a force reboot or a Synchronous Abort.
This commit brings no functional difference as the nodes are
enabled on devices which didn't disable them previously.
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Link: https://lore.kernel.org/r/20210109163001.146867-6-konrad.dybcio@somainline.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Add capacity-dmips-mhz to ensure the scheduler can efficiently
make use of the big.LITTLE core configuration.
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Link: https://lore.kernel.org/r/20210109163001.146867-5-konrad.dybcio@somainline.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
The BLSP2-connected interfaces started from 0 which is.. misleading
to say the least.. the clock names corresponding to these started
from 1, so let's align to that so as to reduce confusion.
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Link: https://lore.kernel.org/r/20210109163001.146867-4-konrad.dybcio@somainline.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Add DMA properties to I2C hosts to allow for DMA transfers.
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Link: https://lore.kernel.org/r/20210109163001.146867-3-konrad.dybcio@somainline.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
This is the usual way of handling pin configuration upstream now, so
align to it.
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Link: https://lore.kernel.org/r/20210109163001.146867-2-konrad.dybcio@somainline.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
FAN53526 and SI470X are both connected over blsp2_i2c5. Configure them.
Signed-off-by: Gustave Monce <gustave.monce@outlook.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210131013853.55810-15-konrad.dybcio@somainline.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Both the power key and the vol- key are connected over PON.
Configure them.
Signed-off-by: Gustave Monce <gustave.monce@outlook.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210131013853.55810-14-konrad.dybcio@somainline.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Lumia 950/XL, like other phones, ship with different storage chips.
Some of them are not capable of stable operation at HS400. Disable it.
Signed-off-by: Gustave Monce <gustave.monce@outlook.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210131013853.55810-12-konrad.dybcio@somainline.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
The driver is not available yet, so hardcode the pins.
Signed-off-by: Gustave Monce <gustave.monce@outlook.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210131013853.55810-11-konrad.dybcio@somainline.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Configure the regulators to ensure proper voltages across
the board.
Signed-off-by: Gustave Monce <gustave.monce@outlook.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210131013853.55810-9-konrad.dybcio@somainline.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
This enables tje hardware keys as well as the Hall sensor.
Signed-off-by: Gustave Monce <gustave.monce@outlook.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210131013853.55810-8-konrad.dybcio@somainline.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Windows-based devices have a far different memory map than
the standard LA one.
Signed-off-by: Gustave Monce <gustave.monce@outlook.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210131013853.55810-7-konrad.dybcio@somainline.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Lumia 950 and 950XL are both based on the Octagon board, sharing
the vast majority of components, configuration etc. Commonize it.
Signed-off-by: Gustave Monce <gustave.monce@outlook.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210131013853.55810-6-konrad.dybcio@somainline.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
This saves a good thousand lines of code, perhaps even
more in the long run.
Co-developed-by: Gustave Monce <gustave.monce@outlook.com>
Signed-off-by: Gustave Monce <gustave.monce@outlook.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210131013853.55810-5-konrad.dybcio@somainline.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
* Move 35500 clock-frequency to kitakami (turns out it's a Sony specific)
* Add missing interfaces
* Fix the naming scheme
* Fix up pin assignments to make all BLSPs work
* Add DMA where previously omitted
Signed-off-by: Gustave Monce <gustave.monce@outlook.com>
Co-developed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210131013853.55810-3-konrad.dybcio@somainline.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
MSM8916 has another I2C QUP controller that can be enabled on
GPIO 10 and 11.
Add blsp_i2c3 to msm8916.dtsi and disable it by default.
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Reviewed-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Jonathan Albrieux <jonathan.albrieux@gmail.com>
Link: https://lore.kernel.org/r/20210125094435.7528-3-jonathan.albrieux@gmail.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
BQ Aquaris X5 (Longcheer L8910) is a smartphone using the MSM8916 SoC.
Add device tree with initial support for:
- SDHCI (internal and external storage)
- USB Device Mode
- UART
- Regulators
- WiFi/BT
- Volume buttons
- Vibrator
- Touchkeys backlight
This device tree is based on downstream device tree from BQ and from
Longcheer L8915 device tree.
Co-developed-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Jonathan Albrieux <jonathan.albrieux@gmail.com>
Link: https://lore.kernel.org/r/20210125094435.7528-2-jonathan.albrieux@gmail.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
RB5 has 3 PCIe ports exposed to connect PCIe client devices. PCIe0 is
connected to QCA6391 chipset and others are available on the HS3
expansion connector. Hence, enable all of them.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20210127234221.947306-3-dmitry.baryshkov@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Add PCIe support for Qcom SM8250 SoC. This SoC has 3 PCIe Gen 3
instances based on Designware IP, out of which PCIe0 has 1 lane support
and the rest have 2 lane support.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
[DB: add ddrss_sf_tbu clock]
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20210127234221.947306-2-dmitry.baryshkov@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
- build DEVAPC as a module
-----BEGIN PGP SIGNATURE-----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=gUHF
-----END PGP SIGNATURE-----
Merge tag 'v5.11-next-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into arm/defconfig
- build PMIC wrapper as a module
- build DEVAPC as a module
* tag 'v5.11-next-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux:
arm64: configs: Support DEVAPC on MediaTek platforms
arm64: configs: Support pwrap on Mediatek MT6779 platform
Link: https://lore.kernel.org/r/aa5c6673-f018-00d3-42da-46a4976d8ef7@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
changes for 5.12, please pull the following:
- Maxime adds a select of the Broadcom STB standard L2 interrupt
controller driver which is used in the Raspberry Pi 4 HDMI controller to
support I2C and CEC interrupts
- Florian adds a debug URT entry for the 72116 STB SoC
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEm+Rq3+YGJdiR9yuFh9CWnEQHBwQFAmAXKL4ACgkQh9CWnEQH
BwRcahAAhPImzrTkjsZhr1Qa9L26pwBPh2Q55C9vBUuYiAPei7OTdgf1tCPm3cja
J70OlYZiFlOWUnTyha4G00gyVRLkAxDNau8iCoJ+2cHpUMHXgYz0Rg5dLXEpAFvH
yvxYS+cj78f+thmogH60cu6AMqowU+868mK0ivlwKMt+z4Mce3fIPhJaxWGDNoBy
GHHvwv3WBCw8ltlezEJDUrLQ3A1IMMIGk1qRKVpsd6kkH/h/lERuVowgvjztN0Qh
QVi3pn3Xu3p9Y4OMQIbDkBiVklrkpcUODLA5ZBieDbmV6DmWMisKaFbYg0BBn/Kt
pvKylCHITNDSh1lNcAnxnoiCm0kKf0CE6Y+m8jaVwoC6MNm6Vc0xrX4Uquz2TWjp
5Z9lY0xO3YF2RhtlINkzO/VxndgJIp1f/2gpn3CNvF5pTbHx5ClQsCYk7YfohHYe
DV237IeMLSgmLWW9ijujRqsgGB2GV2KMsJH3NVnqYwIYpbURgbZ+oZBfuKkeHyCi
y22Kc3RT8EdRFHVbKiIO8npXRl4L6WBcJlwowmasbW150O6X8ckPgRdvXC9O9KVs
x2v+0pjZz30kv0JeGy7HaUwJY8y84G7IHCRuXKy+BHZWMX6pFPbQq/sOo8xV45zt
Vg/XcZDSBjLQZFBaookKurDlsB5on3sY6rzQrYbzzjkFYmLX1Iw=
=aVSR
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-5.12/soc' of https://github.com/Broadcom/stblinux into arm/soc
This pull request contains Broadcom ARM-based SoCs Kconfig/machine entry
changes for 5.12, please pull the following:
- Maxime adds a select of the Broadcom STB standard L2 interrupt
controller driver which is used in the Raspberry Pi 4 HDMI controller to
support I2C and CEC interrupts
- Florian adds a debug URT entry for the 72116 STB SoC
* tag 'arm-soc/for-5.12/soc' of https://github.com/Broadcom/stblinux:
ARM: bcm: Select BRCMSTB_L2_IRQ for bcm2835
ARM: brcmstb: Add debug UART entry for 72116
Link: https://lore.kernel.org/r/20210131221721.685974-6-f.fainelli@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The current /sys/kernel/debug/kernel_page_tables does not display the
*Linear Mapping start* marker on arm64, which I think should be paired
with the *Linear Mapping end* marker.
Since *Linear Mapping start* is the first marker, use initialise 'level'
to -1 in order to display it.
Signed-off-by: Hailong Liu <liu.hailong6@zte.com.cn>
Link: https://lore.kernel.org/r/20210202150749.10104-1-liuhailongg6@163.com
Signed-off-by: Will Deacon <will@kernel.org>
When delivering a hw-breakpoint SIGTRAP to a compat task via ptrace, the
lack of a 'return' statement means we fallthrough to the native case,
which differs in its handling of 'si_errno'.
Although this looks to be harmless because the subsequent signal is
effectively ignored, it's confusing and unintentional, so add the
missing 'return'.
Signed-off-by: Keno Fischer <keno@juliacomputing.com>
Link: https://lore.kernel.org/r/20210202002109.GA624440@juliacomputing.com
Signed-off-by: Will Deacon <will@kernel.org>
Disable MDSS (Mobile Display Subsystem) by default in msm8916.dtsi
and only explicitly enable it in devices' DT which actually use it.
This leads to faster boot and cleaner logs for other devices,
which also won't have to explicitly disable MDSS to use framebuffer.
Reviewed-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Vincent Knecht <vincent.knecht@mailoo.org>
Link: https://lore.kernel.org/r/20210130105717.2628781-4-vincent.knecht@mailoo.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
The Alcatel Idol 3 (4.7") is a smartphone based on MSM8916.
Add a device tree with support for USB, eMMC, SD-Card, WiFi,
BT, power/volume buttons, vibrator and the following sensors:
magnetometer, accelerometer, gyroscope, ambient light+proximity
Reviewed-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Vincent Knecht <vincent.knecht@mailoo.org>
Link: https://lore.kernel.org/r/20210130105717.2628781-3-vincent.knecht@mailoo.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
The only usage of these is to put their addresses in an array of
pointers to const attribute_group structs. Make them const to allow the
compiler to put them in read-only memory.
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Signed-off-by: Will Deacon <will@kernel.org>
Because of the tagged addresses, the __is_lm_address() and
__lm_to_phys() macros grew to some harder to understand bitwise
operations using PAGE_OFFSET. Since these macros only accept untagged
addresses, use a simple subtract operation.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20210201190634.22942-3-catalin.marinas@arm.com
Commit 519ea6f1c8 ("arm64: Fix kernel address detection of
__is_lm_address()") fixed the incorrect validation of addresses below
PAGE_OFFSET. However, it no longer allowed tagged addresses to be passed
to virt_addr_valid().
Fix this by explicitly resetting the pointer tag prior to invoking
__is_lm_address(). This is consistent with the __lm_to_phys() macro.
Fixes: 519ea6f1c8 ("arm64: Fix kernel address detection of __is_lm_address()")
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Cc: <stable@vger.kernel.org> # 5.4.x
Cc: Will Deacon <will@kernel.org>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20210201190634.22942-2-catalin.marinas@arm.com
- rename u-boot mtd partition to a53-firmware on Turris Mox (Armada 3720 based)
- improve SDHCI support on AP807 based board
- move SATA comphy into main armada-37xx.dtsi
- add Armada 8K/7K PWM support
-----BEGIN PGP SIGNATURE-----
iF0EABECAB0WIQQYqXDMF3cvSLY+g9cLBhiOFHI71QUCYBgqrwAKCRALBhiOFHI7
1RwyAJ91R1M5jgXu1AwuKUUwhG5nQz7PlwCfY4H0+4vkvjOPsVRzzPM0ojvYgUY=
=3JKO
-----END PGP SIGNATURE-----
Merge tag 'mvebu-dt64-5.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu into arm/dt
mvebu dt64 for 5.12 (part 1)
- rename u-boot mtd partition to a53-firmware on Turris Mox (Armada 3720 based)
- improve SDHCI support on AP807 based board
- move SATA comphy into main armada-37xx.dtsi
- add Armada 8K/7K PWM support
* tag 'mvebu-dt64-5.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu:
arm64: dts: armada: add pwm offsets for ap/cp gpios
arm64: dts: marvell: armada-37xx: Add SATA comphy into main armada-37xx.dtsi file
arm64: dts: cn913x-db: enable MMC HS400
arm64: dts: change AP807 SDHCI compatibility string
arm64: dts: armada-3720-turris-mox: rename u-boot mtd partition to a53-firmware
Link: https://lore.kernel.org/r/87pn1jn48s.fsf@BL-laptop
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
for 5.12 please pull the following:
- Rafal continues to add support for the 4906/4908 SoC family and adds
a Device Tree for the Netgear R8000P router (4906-based), describes
the NAND controller of the 4908 more appropriately (based on the older
63138 DSL SoC), describes the 4908 PCIe reset controller, internal
Ethernet switch (Starfighter 2 switch) and finally the Power
Management Bus (PMB)
- Scott removes all of the SATA-related Device Tree nodes since SATA
is unused on the Stingray product line
-----BEGIN PGP SIGNATURE-----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=YhP5
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-5.12/devicetree-arm64' of https://github.com/Broadcom/stblinux into arm/dt
This pull request contains Broadcom ARM64-based SoCs Device Tree changes
for 5.12 please pull the following:
- Rafal continues to add support for the 4906/4908 SoC family and adds
a Device Tree for the Netgear R8000P router (4906-based), describes
the NAND controller of the 4908 more appropriately (based on the older
63138 DSL SoC), describes the 4908 PCIe reset controller, internal
Ethernet switch (Starfighter 2 switch) and finally the Power
Management Bus (PMB)
- Scott removes all of the SATA-related Device Tree nodes since SATA
is unused on the Stingray product line
* tag 'arm-soc/for-5.12/devicetree-arm64' of https://github.com/Broadcom/stblinux:
arm64: dts: broadcom: Remove SATA from Stingray
arm64: dts: broadcom: bcm4908: describe PMB block
arm64: dts: broadcom: bcm4908: describe internal switch
arm64: dts: broadcom: bcm4908: describe PCIe reset controller
arm64: dts: broadcom: bcm4908: use proper NAND binding
arm64: dts: broadcom: bcm4908: add BCM4906 Netgear R8000P DTS files
dt-bindings: arm: bcm: document Netgear R8000P binding
Link: https://lore.kernel.org/r/20210131221721.685974-4-f.fainelli@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
adding:
- DT fixes spotted through the schemas
- Mali Support for the A10s/A13/GR8/R8
- MMC improvements for the A64 and H6
- New board: SL631 Action Camera, PineTab Early Adopter
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCYBb7uwAKCRDj7w1vZxhR
xd3mAP46LnfQ/9vvCjhWMV5J7E1ob3u1A5ND3sULpS0X0oEU1wD/aCuoCtSZY4hN
/lpCtj2QS1GAH8c5ipHqB8SgBRmCoQo=
=fzEu
-----END PGP SIGNATURE-----
Merge tag 'sunxi-dt-for-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/dt
Our usual bunch of patches to support the Allwinner SoCs, this time
adding:
- DT fixes spotted through the schemas
- Mali Support for the A10s/A13/GR8/R8
- MMC improvements for the A64 and H6
- New board: SL631 Action Camera, PineTab Early Adopter
* tag 'sunxi-dt-for-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: (47 commits)
ARM: dts: sunxi: Rename nmi_intc to r_intc
ARM: dts: sun8i: h2-plus: bananapi-m2-zero: Increase BT UART speed
ARM: dts: sunxi: bananapi-m2-plus: Increase BT UART speed
arm64: dts: allwinner: pine-h64: Fix typos in BT GPIOs
arm64: dts: allwinner: pinetab: Fix the panel compatible
arm64: dts: allwinner: pinephone: Remove useless light sensor supplies
arm64: dts: allwinner: h6: Use - instead of @ for DT OPP entries
ARM: dts: sun8i-a33: sina33: Add missing panel power supply
ARM: dts: sun8i-a83t: Remove empty CSI port
ARM: dts: sun8i-s3: pinecube: Fix CSI DTC warnings
ARM: dts: sun8i-s3: impetus: Fix the USB PHY ID detect GPIO properties
ARM: dts: sun8i: nanopi-r1: Fix GPIO regulator state array
ARM: dts: sun6i: primo81: Remove useless io-channel-cells
ARM: dts: sunxi: Fix CPU thermal zone node name
ARM: dts: sunxi: Add missing backlight supply
ARM: dts: sunxi: Fix the LED node names
dt-bindings: rtc: sun6i-a31-rtc: Loosen the requirements on the clocks
dt-bindings: iio: adc: Add AXP803 compatible
dt-bindings: sunxi: Fix the pinecube compatible
ARM: dts: sun8i-v3s: Add CSI0 MCLK pin definition
...
Link: https://lore.kernel.org/r/48511540-fdd6-4fbe-8037-ec9fa8436147.lettre@localhost
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This patch changes device name to more user friendly name of
Analog and SPDIF sound nodes for rk3399-rockpro64.
Signed-off-by: Katsuhiro Suzuki <katsuhiro@katsuster.net>
Link: https://lore.kernel.org/r/20210110151913.3615326-1-katsuhiro@katsuster.net
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
A test with the command below gives this error:
/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dt.yaml:
ethernet-phy: 'reg' is a required property
The pinctrl nodename "ethernet-phy" conflicts with the rules
in the "ethernet-phy.yaml" document, so rename it to "gmac2io".
make ARCH=arm64 dtbs_check
DT_SCHEMA_FILES=Documentation/devicetree/bindings/net/ethernet-phy.yaml
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20210110194851.10207-1-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Recently introduced async probe on mmc devices can shuffle block IDs.
Pin them to fixed values to ease booting in environments where UUIDs are
not practical. Use newly introduced aliases for mmcblk devices from [1].
The sort order is based on reg address.
[1] https://patchwork.kernel.org/patch/11747669/
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20210118155242.7172-5-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Recently introduced async probe on mmc devices can shuffle block IDs.
Pin them to fixed values to ease booting in environments where UUIDs are
not practical. Use newly introduced aliases for mmcblk devices from [1].
The sort order is based on reg address.
[1] https://patchwork.kernel.org/patch/11747669/
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20210118155242.7172-4-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Recently introduced async probe on mmc devices can shuffle block IDs.
Pin them to fixed values to ease booting in environments where UUIDs are
not practical. Use newly introduced aliases for mmcblk devices from [1].
The sort order is based on reg address.
[1] https://patchwork.kernel.org/patch/11747669/
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20210118155242.7172-3-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The cpu_thermal node in the rk3399-rock960.dts file does not
reference &cpu_thermal directly to add the board-specific parts,
but also repeats all the SoC default properties.
Clean the whole thing up and fix alignment.
Place new nodes in the correct alphabetical order.
Compered to rk3399.dtsi the temperature property in
cpu_alert0 changes from <70000> to <65000>.
A sustainable-power property was added.
The trip property in cooling map0 points to <&cpu_alert1>
instead of <&cpu_alert0>.
Suggested-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20210118180054.9360-1-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The "amba" bus nodes wrapping all the DMA-330 nodes serve no useful
purpose, and certainly bear no relation at all to the actual underlying
interconnect topology. They appear to be cargo-cult copying from a
design misstep in the very early days of FDT adoption on ARM, which was
righted with the "arm,primecell" compatible, and the last trace of the
idea finally purged by commit 2ef7d5f342 ("ARM, ARM64: dts: drop
"arm,amba-bus" in favor of "simple-bus"").
As such, they can simply be removed and the DMA-330 nodes fitted into
the normal sort order.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/131e0ea065109760ea3b59c4bb90cf4fac7826f7.1611186142.git.robin.murphy@arm.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Set NanoPi R2S's "sys" LED to be on by default. This matches the
behaviour of the stock FriendlyWRT image, and makes it much easier
to tell when the thing has finished booting.
Suitable triggers for the two network LEDs cannot realistically be
configured from DT, so leave them be.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/f066be60aa99460a45d04113c5e507d6602186f1.1611187213.git.robin.murphy@arm.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
A test with the command below gives for example this error:
/arch/arm64/boot/dts/rockchip/rk3399-evb.dt.yaml: pcie@f8000000:
ranges: 'oneOf' conditional failed, one must be fixed:
The pcie ranges property is an array. The dt-check expects that
each array item is wrapped with angle brackets, so fix that ranges
property format for the rk3399 pcie node.
make ARCH=arm64 dtbs_check
DT_SCHEMA_FILES=~/.local/lib/python3.5/site-packages/dtschema/
schemas/pci/pci-bus.yaml
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20210122171243.16138-1-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
According to the schematic there is an external pull up, so there is no
need to enable the internal one additionally. Using no pull up matches
the vendor device tree.
Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org>
Link: https://lore.kernel.org/r/20210124210328.611707-2-uwe@kleine-koenig.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Two new warnings are reported by sparse:
"sparse warnings: (new ones prefixed by >>)"
>> arch/arm64/kernel/hibernate.c:181:39: sparse: sparse: cast to
restricted gfp_t
>> arch/arm64/kernel/hibernate.c:202:44: sparse: sparse: cast from
restricted gfp_t
gfp_t has __bitwise type attribute and requires __force added to casting
in order to avoid these warnings.
Fixes: 50f53fb721 ("arm64: trans_pgd: make trans_pgd_map_page generic")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Pavel Tatashin <pasha.tatashin@soleen.com>
Link: https://lore.kernel.org/r/20210201150306.54099-2-pasha.tatashin@soleen.com
Signed-off-by: Will Deacon <will@kernel.org>
gen-hyprel is, for better or worse, a native-endian program:
it assumes that the ELF data structures are in the host's
endianness, and even assumes that the compiled kernel is
little-endian in one particular case.
None of these assumptions hold true though: people actually build
(use?) BE arm64 kernels, and seem to avoid doing so on BE hosts.
Madness!
In order to solve this, wrap each access to the ELF data structures
with the required byte-swapping magic. This requires to obtain
the kernel data structure, and provide per-endianess wrappers.
This result in a kernel that links and even boots in a model.
Fixes: 8c49b5d43d ("KVM: arm64: Generate hyp relocation data")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: David Brazdil <dbrazdil@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
The header file of GCE should be for MT8183 SoC instead of MT8173.
Fixes: 91f9c963ce ("arm64: dts: mt8183: Add display nodes for MT8183")
Reported-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: Matthias Brugger <mbrugger@suse.com>
Reviewed-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Link: https://lore.kernel.org/r/20210131101726.804-1-matthias.bgg@kernel.org
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
The commit 53441b8ef7 ("arm64: dts: allwinner: h6: PineH64 model B:
Add bluetooth") introduced the Bluetooth chip for the PineH64 model B,
but the GPIOs property didn't conform to the binding of the bluetooth
chip. Let's fix this.
Fixes: 53441b8ef7 ("arm64: dts: allwinner: h6: PineH64 model B: Add bluetooth")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Jernej Skrabec <jernej.skrabec@siol.net>
Link: https://lore.kernel.org/r/20210114113538.1233933-19-maxime@cerno.tech
The commit 7fa40ca7ef ("arm64: allwinner: dts: a64: add DT for Early
Adopter's PineTab") introduced an ili9881-based panel device node but
didn't conform to the binding. Fix this.
Fixes: 7fa40ca7ef ("arm64: allwinner: dts: a64: add DT for Early Adopter's PineTab")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Jernej Skrabec <jernej.skrabec@siol.net>
Link: https://lore.kernel.org/r/20210114113538.1233933-18-maxime@cerno.tech
DTC and the dt-validate tools report warnings for opp with the format
opp@$frequency: dtc for a missing reg property, and dt-validate since
the binding requires child nodes to have the format opp-$frequency.
Change this to the latter format.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Jernej Skrabec <jernej.skrabec@siol.net>
Link: https://lore.kernel.org/r/20210114113538.1233933-16-maxime@cerno.tech
Similar to krane-sku176 but using a different panel source.
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Link: https://lore.kernel.org/r/20210113110400.616319-2-hsinyi@chromium.org
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Config dsi node for mt8183 kukui. Set panel and ports.
Several kukui boards share the same panel property and only compatible
is different. So compatible will be set in board dts for comparison
convenience.
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Tested-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Nicolas Boichat <drinkcat@chromium.org>
Link: https://lore.kernel.org/r/20210113110400.616319-1-hsinyi@chromium.org
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
This driver is mandatory for the nitrogen8m mini board
when booting from the sdcard slot.
Signed-off-by: Adrien Grassein <adrien.grassein@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
To use the reduced reporting mode the threshold values need to be set
explicitly. Configure the threshold to be less than 0.5% of the full
touchscreen range. This seems to be a good compromise between system
load and input accurancy.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The ALERT signaling happens on the falling edge of the signal, as rising
edge doesn't really have any notion, as it may happen much later (due to
shared IRQ line) or too early if the chip resolves the fault itself. So
only trigger the IRQ on the edge we are actually interested in.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The internal USB is connected to a USB2 hub, the front-panel USB
is wired directly, but does not support USB3 speeds electrically.
Limit both ports accordingly.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Reduce slew rate and set drive strength to 105 Ohm. The previous settings
had some issues with signal ringing, due to the slew rate being too fast.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This adds all the necessary nodes to get audio support on both the
RMB3 and Zest boards.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Dcfg was overlapping with clockgen address space which resulted
in failure in memory allocation for dcfg. According regs description
dcfg size should not be bigger than 4KB.
Signed-off-by: Zyta Szpak <zr@semihalf.com>
Fixes: 8126d88162 ("arm64: dts: add QorIQ LS1046A SoC support")
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
LS1028A supports two flexcan controllers similar to LX2160A.
There's already a compatible entry defined i.e "fsl,lx2160ar1-flexcan"
which can be further reused for LS1028A.
Please note, "fsl,ls1028ar1-flexcan" compatible entry doesn't exists and
can be safely removed.
LS1028A has a single peripheral clock (i.e platform clock) source
connected to both "ipg" and "per" and therefore, remove "sysclk" as
clock source from device-tree.
Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
LX2160A supports two flexcan controllers. Add the support.
Enable support further for LX2160A-RDB/QDS.
Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Fixes an issue with HDA codec detection by properly wiring up the
power-domain for the HDA controller. This also fixes one of the USB-C
ports on Jetson AGX Xavier and enables support for audio on various
Tegra210, Tegra186 and Tegra194 boards. The Jetson Nano and Jetson TX1
also gain QSPI support.
-----BEGIN PGP SIGNATURE-----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=UXQX
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-5.12-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/dt
arm64: tegra: Device tree changes for v5.12-rc1
Fixes an issue with HDA codec detection by properly wiring up the
power-domain for the HDA controller. This also fixes one of the USB-C
ports on Jetson AGX Xavier and enables support for audio on various
Tegra210, Tegra186 and Tegra194 boards. The Jetson Nano and Jetson TX1
also gain QSPI support.
* tag 'tegra-for-5.12-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
arm64: tegra: Audio graph sound card for Jetson AGX Xavier
arm64: tegra: Audio graph sound card for Jetson TX2
Revert "arm64: tegra: Disable the ACONNECT for Jetson TX2"
arm64: tegra: Add RT5658 device entry
arm64: tegra: Add support for Jetson Xavier NX with eMMC
arm64: tegra: Prepare for supporting the Jetson Xavier NX with eMMC
arm64: tegra: Enable QSPI on Jetson Xavier NX
arm64: tegra: Add QSPI nodes on Tegra194
arm64: tegra: Enable QSPI on Jetson Nano
arm64: tegra: Audio graph sound card for Jetson Nano and TX1
arm64: tegra: Audio graph header for Tegra210
arm64: tegra: Order nodes alphabetically on Tegra210
arm64: tegra: Enable Jetson-Xavier J512 USB host
arm64: tegra: Add XUSB pad controller's "nvidia,pmc" property on Tegra210
arm64: tegra: Add power-domain for Tegra210 HDA
dt-bindings: clock: tegra: Add clock ID TEGRA210_CLK_QSPI_PM
Link: https://lore.kernel.org/r/20210129193254.3610492-5-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Enables the Tegra SoC thermal driver that is used on various Tegra132
and Tegra210 platforms, as well as the Tegra audio graph driver that can
be used to enable audio support on Tegra210, Tegra186 and Tegra194.
-----BEGIN PGP SIGNATURE-----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=u7hK
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-5.12-arm64-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/defconfig
arm64: tegra: Default configuration changes for v5.12-rc1
Enables the Tegra SoC thermal driver that is used on various Tegra132
and Tegra210 platforms, as well as the Tegra audio graph driver that can
be used to enable audio support on Tegra210, Tegra186 and Tegra194.
* tag 'tegra-for-5.12-arm64-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
arm64: defconfig: Enable Tegra audio graph card driver
arm64: defconfig: Enable Tegra SoC Thermal driver
Link: https://lore.kernel.org/r/20210129193254.3610492-6-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Fix the virt_addr_valid() returning true for < PAGE_OFFSET addresses.
- Do not blindly trust the DMA masks from ACPI/IORT.
-----BEGIN PGP SIGNATURE-----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=CBSN
-----END PGP SIGNATURE-----
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
- Fix the virt_addr_valid() returning true for < PAGE_OFFSET addresses.
- Do not blindly trust the DMA masks from ACPI/IORT.
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
ACPI/IORT: Do not blindly trust DMA masks from firmware
arm64: Fix kernel address detection of __is_lm_address()
Enable support for audio-graph based sound card on Jetson AGX Xavier.
Following I/O interfaces are enabled.
* I2S1, I2S2, I2S4 and I2S6
* DMIC3
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Enable support for audio-graph based sound card on Jetson TX2. Based
on the board design following I/O modules are enabled.
* All I2S instances (I2S1 ... I2S6)
* All DSPK instances (DSPK1, DSPK2)
* DMIC1, DMIC2 and DMIC3
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The 'marvell,pwm-offset' property of both GPIO blocks (per CP component)
point to the same counter registers offset. The driver will decide how
to use counters A/B.
This is different from the convention of pwm on earlier Armada series
(370/38x). On those systems the assignment of A/B counters to GPIO
blocks is coded in both DT and the driver. The actual behaviour of the
current driver on Armada 8K/7K is the same as earlier systems.
Add also clock properties for base pwm frequency reference.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
SATA on A3720 SOC can use only comphy2, so move this definition from board
specific DTS file armada-3720-espressobin.dtsi into main A3720 SOC file
armada-37xx.dtsi.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
This patch adds necessary flags in the device tree
which enable HS400 mode on AP807 MMC controller
on the CN913x-DB board.
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
This patch adds new compatible string to AP807 DTSI to avoid
its SDHCI controller to run in "slow mode" with disabled UHS.
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
The partition called "u-boot" in reality contains TF-A and U-Boot, and
TF-A is before U-Boot.
Rename this parition to "a53-firmware" to avoid confusion for users,
since they cannot simply build U-Boot from U-Boot repository and flash
the resulting image there. Instead they have to build the firmware with
the sources from the mox-boot-builder repository [1] and flash the
a53-firmware.bin binary there.
[1] https://gitlab.nic.cz/turris/mox-boot-builder
Signed-off-by: Marek Behún <kabel@kernel.org>
Fixes: 7109d817db ("arm64: dts: marvell: add DTS for Turris Mox")
Cc: Gregory CLEMENT <gregory.clement@bootlin.com>
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
This patch adds spi-uart controller to LS1012A-FRDM board dts.
Device is equipped in SC16IS740 from NXP.
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
- Further cleanups of the hisilicon DTS to align with the dtschema
- Add or update the I2C, pinctrl and reset nodes for Hikey970
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=SHmD
-----END PGP SIGNATURE-----
Merge tag 'hisi-arm64-dt-for-5.12v2' of git://github.com/hisilicon/linux-hisi into arm/dt
ARM64: DT: Hisilicon ARM64 DT updates for 5.12
- Further cleanups of the hisilicon DTS to align with the dtschema
- Add or update the I2C, pinctrl and reset nodes for Hikey970
* tag 'hisi-arm64-dt-for-5.12v2' of git://github.com/hisilicon/linux-hisi:
arm64: dts: hisilicon: hi3670.dtsi: add I2C settings
arm64: dts: hisilicon: hikey970-pinctrl.dtsi: add missing pinctrl settings
arm64: dts: hisilicon: hi3670.dtsi: add iomcu_rst
arm64: dts: hisilicon: delete unused property smmu-cb-memtype
arm64: dts: hisilicon: avoid irrelevant nodes being mistakenly identified as PHY nodes
arm64: dts: hisilicon: normalize the node name of the localbus
arm64: dts: hisilicon: normalize the node name of the module thermal
arm64: dts: hisilicon: place clock-names "bus" before "core"
arm64: dts: hisilicon: separate each group of data in the property "ranges"
Link: https://lore.kernel.org/r/6013D1C7.90902@hisilicon.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
There is a QSPI chip connected to the FlexSPI bus. Enable it.
Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The i.MX8M Nano has the same Flexspi controller used in the i.MX8M
Mini. Add the node and disable it by default.
Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The I2C buses are not declared at the device tree. As this will
be needed by further patches, add them, keeping all in
disabled state. Per-board settings can override it.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
There are several pinctrl settings that are missing at this
DT file.
Also, the entries are out of order.
Add the missing bits, as they'll be required by the DRM driver - and
probably by other drivers not upstreamed yet.
Reorder the entres, adding the missing bits.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
This is required in order to support USB.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
The "smmu-cb-memtype" is a private property developed by the Hisilicon
driver in the early stage and is not used now. So delete it.
Otherwise, below YAML check warnings are reported:
arch/arm64/boot/dts/hisilicon/hip06-d03.dt.yaml: iommu@a0040000: \
'smmu-cb-memtype' does not match any of the regexes: 'pinctrl-[0-9]+'
arch/arm64/boot/dts/hisilicon/hip07-d05.dt.yaml: iommu@a0040000: \
'smmu-cb-memtype' does not match any of the regexes: 'pinctrl-[0-9]+'
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Currently, the names of several nodes incorrectly match common PHY
provider schema. And the phy-provider.yaml requires them must have
property "#phy-cells". As a result, false positives similar to the
following are reported:
usb2-phy@120: '#phy-cells' is a required property
Change their names slightly so that they do not match pattern:
"^(|usb-|usb2-|usb3-|pci-|pcie-|sata-)phy(@[0-9a-f,]+)*$".
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Change the node name of the localbus to match
'^([a-z][a-z0-9\\-]+-bus|bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$'. This error
is detected by simple-bus.yaml.
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
1. Change the node name of the thermal zone to match
'^[a-zA-Z][a-zA-Z0-9\\-]{1,12}-thermal$', add suffix "-thermal".
2. Change the node name of the trip point to match
'^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', delete character "@".
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Look at the clock-names schema defined in arm,mali-utgard.yaml:
clock-names:
items:
- const: bus
- const: core
The "bus" needs to be placed before the "core".
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Do not write the "ranges" of multiple groups of data into a uint32 array,
use <> to separate them. Otherwise, the errors similar to the following
will be reported:
soc: pcie@a0090000:ranges: [[33554432, 0, 2986344448, 0, 2986344448, 0, \
100597760, 16777216, 0, 0, 0, 3086942208, 0, 65536]] is not valid under \
any of the given schemas (Possible causes of the failure):
soc: pcie@a0090000:ranges: [[33554432, 0, 2986344448, 0, 2986344448, 0, \
100597760, 16777216, 0, 0, 0, 3086942208, 0, 65536]] is not of type 'boolean'
soc: pcie@a0090000:ranges:0: [33554432, 0, 2986344448, 0, 2986344448, 0, \
100597760, 16777216, 0, 0, 0, 3086942208, 0, 65536] is too long
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Add librem5-r4 with specifics to that revision like the near-level,
battery and charger properties. For schematics and more information,
see https://developer.puri.sm/Librem5/Hardware_Reference/Evergreen.html
Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Expect all those regulators to be turned on initially.
Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This enables the Librem5's ft8006p based LCD panel driven by the
imx8mq's Northwest Logic DSI IP core and mxsfb display controller.
Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
It's a supply for to touch and LCD.
Signed-off-by: Guido Günther <agx@sigxcpu.org>
Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The tps65982 feeds the bq25895 charge controller on the Librem 5.
Signed-off-by: Guido Günther <agx@sigxcpu.org>
Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
With the pmic driver fixed we can now shut off the regulator in the gpc.
Signed-off-by: Guido Günther <agx@sigxcpu.org>
Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This is consistent with other IRQs and makes keeps currents low.
Signed-off-by: Guido Günther <agx@sigxcpu.org>
Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The haptic motor for the Librem 5 uses this.
Signed-off-by: Guido Günther <agx@sigxcpu.org>
Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
"make dtbs_check" fails with:
arch/arm64/boot/dts/renesas/r8a774b1-beacon-rzg2n-kit.dt.yaml: eeprom@50: compatible: 'oneOf' conditional failed, one must be fixed:
'microchip,at24c64' does not match '^(atmel|catalyst|microchip|nxp|ramtron|renesas|rohm|st),(24(c|cs|lc|mac)[0-9]+|spd)$'
Fix this by dropping the bogus "at" prefix.
Fixes: a1d8a344f1 ("arm64: dts: renesas: Introduce r8a774a1-beacon-rzg2m-kit")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20210128110136.2293490-1-geert+renesas@glider.be
Increase the SmartEEE Tw parameter for Atheros PHYs to stop gigabit
links from sporadically dropping. Testing on this platform shows that
a value of 24 results in a stable link, whereas 23 or below has the
occasional drop.
Tested with a Netgear GS116 unmanaged switch link partner with Cat 5e
cabling.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
We are using Jailhouse Hypervsior which has virtual pci node that
use dt domains. so also use dt domains for pci node, this will avoid
conflict with Jailhouse Hypervisor to trigger the following error:
pr_err("Inconsistent \"linux,pci-domain\" property in DT\n");
Reviewed-by: Richard Zhu <hongxing.zhu@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
drivers/net/can/dev.c
b552766c87 ("can: dev: prevent potential information leak in can_fill_info()")
3e77f70e73 ("can: dev: move driver related infrastructure into separate subdir")
0a042c6ec9 ("can: dev: move netlink related code into seperate file")
Code move.
drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c
57ac4a31c4 ("net/mlx5e: Correctly handle changing the number of queues when the interface is down")
214baf2287 ("net/mlx5e: Support HTB offload")
Adjacent code changes
net/switchdev/switchdev.c
20776b465c ("net: switchdev: don't set port_obj_info->handled true when -EOPNOTSUPP")
ffb68fc58e ("net: switchdev: remove the transaction structure from port object notifiers")
bae33f2b5a ("net: switchdev: remove the transaction structure from port attributes")
Transaction parameter gets dropped otherwise keep the fix.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The .hyp.text section is supposed to be reserved for the nVHE EL2 code.
However, there is currently one occurrence of EL1 executing code located
in .hyp.text when calling __hyp_{re}set_vectors(), which happen to sit
next to the EL2 stub vectors. While not a problem yet, such patterns
will cause issues when removing the host kernel from the TCB, so a
cleaner split would be preferable.
Fix this by delimiting the end of the .hyp.text section in hyp-stub.S.
Acked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Quentin Perret <qperret@google.com>
Link: https://lore.kernel.org/r/20210128173850.2478161-1-qperret@google.com
Signed-off-by: Will Deacon <will@kernel.org>
- Avoid clobbering extra registers on initialisation
-----BEGIN PGP SIGNATURE-----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=LLd9
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-fixes-5.11-3' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 fixes for 5.11, take #3
- Avoid clobbering extra registers on initialisation
These are the current arm-soc bug fixes for linux-5.11. I already merged
a larger set that just came in during the past three days but has not
had much exposure in linux-next, so these are the ones I merged last week.
Most of these are for the NXP i.MX platform (descriptions from their
pull request):
- Fix pcf2127 reset for imx7d-flex-concentrator board.
- Fix i.MX6 suspend with Thumb-2 kernel.
- Fix ethernet-phy address issue on imx6qdl-sr-som board.
- Fix GPIO3 `gpio-ranges` on i.MX8MP.
- Select SOC_BUS for IMX_SCU driver to fix build issue.
- Fix backlight pwm on imx6qdl-kontron-samx6i which is lost from
#pwm-cells conversion.
- Fix duplicated bus node name for i.MX8MN SoC.
- Fix reset register offset on LS1028A SoC.
- Rename MMC node aliases for imx6q-tbs2910 to keep the MMC device
index consistent with previous kernel version.
- Selecting ARM_GIC_V3 on non-CP15 processors to fix one build failure
with i.MX8M SoC driver.
- Fix typos with status property on imx6qdl-kontron-samx6i board.
- Fix duplicated regulator-name on imx6qdl-gw52xx board.
Aside from i.MX, the bugfixes are all over the place:
- Coccinelle found a refcount imbalance on integrator
- defconfig fix for TI K3
- A boot regression fix for ST ux500
- A code preemption fix for the optee driver
- USB DMA regression on Broadcom Stingray
- A bogus boot time warning fix for at91 code
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----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=Vneq
-----END PGP SIGNATURE-----
Merge tag 'arm-soc-fixes-v5.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"These are the current arm-soc bug fixes for linux-5.11. I already
merged a larger set that just came in during the past three days but
has not had much exposure in linux-next, but this is the subset I
merged last week.
Most of these are for the NXP i.MX platform (descriptions from their
pull request):
- Fix pcf2127 reset for imx7d-flex-concentrator board.
- Fix i.MX6 suspend with Thumb-2 kernel.
- Fix ethernet-phy address issue on imx6qdl-sr-som board.
- Fix GPIO3 `gpio-ranges` on i.MX8MP.
- Select SOC_BUS for IMX_SCU driver to fix build issue.
- Fix backlight pwm on imx6qdl-kontron-samx6i which is lost from
#pwm-cells conversion.
- Fix duplicated bus node name for i.MX8MN SoC.
- Fix reset register offset on LS1028A SoC.
- Rename MMC node aliases for imx6q-tbs2910 to keep the MMC device
index consistent with previous kernel version.
- Selecting ARM_GIC_V3 on non-CP15 processors to fix one build
failure with i.MX8M SoC driver.
- Fix typos with status property on imx6qdl-kontron-samx6i board.
- Fix duplicated regulator-name on imx6qdl-gw52xx board.
Aside from i.MX, the bugfixes are all over the place:
- Coccinelle found a refcount imbalance on integrator
- defconfig fix for TI K3
- A boot regression fix for ST ux500
- A code preemption fix for the optee driver
- USB DMA regression on Broadcom Stingray
- A bogus boot time warning fix for at91 code"
* tag 'arm-soc-fixes-v5.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
MAINTAINERS: Include bcm2835 subsequents into search
arm64: dts: broadcom: Fix USB DMA address translation for Stingray
drivers: soc: atmel: add null entry at the end of at91_soc_allowed_list[]
drivers: soc: atmel: Avoid calling at91_soc_init on non AT91 SoCs
tee: optee: replace might_sleep with cond_resched
firmware: imx: select SOC_BUS to fix firmware build
arm64: dts: imx8mp: Correct the gpio ranges of gpio3
ARM: dts: imx6qdl-sr-som: fix some cubox-i platforms
ARM: imx: build suspend-imx6.S with arm instruction set
ARM: dts: imx7d-flex-concentrator: fix pcf2127 reset
ARM: dts: ux500: Reserve memory carveouts
arm64: defconfig: Drop unused K3 SoC specific options
bus: arm-integrator-lm: Add of_node_put() before return statement
ARM: dts: imx6qdl-gw52xx: fix duplicate regulator naming
ARM: dts: imx6qdl-kontron-samx6i: fix i2c_lcd/cam default status
ARM: imx: fix imx8m dependencies
ARM: dts: tbs2910: rename MMC node aliases
arm64: dts: ls1028a: fix the offset of the reset register
arm64: dts: imx8mn: Fix duplicate node name
ARM: dts: imx6qdl-kontron-samx6i: fix pwms for lcd-backlight
The MT8183 display PWM device will not work until the associated
power-domain is enabled. Add the power-domain reference to the node
allows the display PWM driver to operate and the backlight turn on.
Fixes: f15722c0fe ("arm64: dts: mt8183: Add pwm and backlight node")
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Hsin-Yi Wang <hsinyi@chromium.org>
Link: https://lore.kernel.org/r/20210113215723.71966-1-enric.balletbo@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Add support for the variant of the Jetson Xavier NX Developer Kit that
has a system-on-module which includes an eMMC.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
There are two versions of the Jetson Xavier NX system-on-module; one
with a micro SD-card slot and one with an eMMC. Currently, only the
system-on-module with the micro SD-card slot is supported. Before adding
support for the eMMC variant, move the common device-tree parts of the
existing Jetson Xavier NX system-on-module board (p3668-0000) and
reference carrier board (p3509-0000) into include files that can be used
by both Jetson Xavier NX variants.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
property name must include only lowercase and '-'
Fixes: 91f9c963ce ("arm64: dts: mt8183: Add display nodes for MT8183")
Signed-off-by: Yongqiang Niu <yongqiang.niu@mediatek.com>
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Link: https://lore.kernel.org/r/20210128112314.1304160-2-hsinyi@chromium.org
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
We can use CPU specific pmu configuration to expose the appropriate
CPU specific events rather than just the basic generic pmuv3 perf
events.
Reported-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Tested-by: Suman Anna <s-anna@ti.com>
Reviewed-by: Tero Kristo <kristo@kernel.org>
Link: https://lore.kernel.org/r/20210120195145.32259-1-nm@ti.com
wrongly used dt properties and parts that shouldn't be enabled.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAmAQV9MQHGhlaWtvQHNu
dGVjaC5kZQAKCRDzpnnJnNEdgRTWCACsJ1R9z6KJRKiFayLykyw4a3/wTGUQyBHV
7jyF9FmkDo1wzNFpR3uQw124NwdXWUzUZGwyL1qgxk5RCBiN0E9I1xQZ819rMx/a
Q9rZj9b0r39fh4giON7yc7U8UQroToChIfr1NieQZL6QuolCULibMQBg4LGAx8NB
FM+ThGmw55yRphiUwjPJoi/PUWhrt69E2bf8u44CFi6x6YLz0QnTN0yJ4A8R6ps5
bfxaHGEX1wYlYYiWbNNsPIZVT/1gfjsAJydsDwwLwuO24Rdx8IjYTr9gRE86k1t5
H+nCd92p7WVTkCyEVGoq5hlYvbb0IzPTaqi2XLxNw9Qn/KgEaXBc
=95NW
-----END PGP SIGNATURE-----
Merge tag 'v5.11-rockchip-dtsfixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/fixes
Wrong irq number on px30 and cleanups of stuff on rk3399 regarding
wrongly used dt properties and parts that shouldn't be enabled.
* tag 'v5.11-rockchip-dtsfixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
arm64: dts: rockchip: Disable display for NanoPi R2S
arm64: dts: rockchip: remove interrupt-names property from rk3399 vdec node
arm64: dts: rockchip: Fix PCIe DT properties on rk3399
arm64: dts: rockchip: Use only supported PCIe link speed on Pinebook Pro
arm64: dts: rockchip: fix vopl iommu irq on px30
Link: https://lore.kernel.org/r/5429065.DvuYhMxLoT@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
For the proper reboot Odroid-C4 board requires to switch TFLASH_VDD_EN
pin to the high impedance mode, otherwise the board is stuck in the
middle of loading early stages of the bootloader from SD card.
This can be achieved by using the OPEN_DRAIN flag instead of the
ACTIVE_HIGH, what will leave the pin in input mode to achieve high state
(pin has the pull-up) and solve the issue.
Suggested-by: Neil Armstrong <narmstrong@baylibre.com>
Fixes: 326e57518b ("arm64: dts: meson-sm1: add support for Hardkernel ODROID-C4")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/20210122055218.27241-1-m.szyprowski@samsung.com
x0 will contain the only argument to arm64_relocate_new_kernel; don't
use it as a temp. Reassigned registers to free-up x0 so we won't need
to copy argument, and can use it at the beginning and at the end of the
function.
Signed-off-by: Pavel Tatashin <pasha.tatashin@soleen.com>
Reviewed-by: James Morse <james.morse@arm.com>
Link: https://lore.kernel.org/r/20210125191923.1060122-13-pasha.tatashin@soleen.com
Signed-off-by: Will Deacon <will@kernel.org>
In preparation to bigger changes to arm64_relocate_new_kernel that would
enable this function to do MMU backed memory copy, do few clean-ups and
optimizations. These include:
1. Call raw_dcache_line_size() only when relocation is actually going to
happen. i.e. kdump type kexec, does not need it.
2. copy_page(dest, src, tmps...) increments dest and src by PAGE_SIZE, so
no need to store dest prior to calling copy_page and increment it
after. Also, src is not used after a copy, not need to copy either.
3. For consistency use comment on the same line with instruction when it
describes the instruction itself.
4. Some comment corrections
Signed-off-by: Pavel Tatashin <pasha.tatashin@soleen.com>
Link: https://lore.kernel.org/r/20210125191923.1060122-12-pasha.tatashin@soleen.com
Signed-off-by: Will Deacon <will@kernel.org>
Currently, kexec_image_info() is called during load time, and
right before kernel is being kexec'ed. There is no need to do both.
So, call it only once when segments are loaded and the physical
location of page with copy of arm64_relocate_new_kernel is known.
Signed-off-by: Pavel Tatashin <pasha.tatashin@soleen.com>
Acked-by: James Morse <james.morse@arm.com>
Link: https://lore.kernel.org/r/20210125191923.1060122-11-pasha.tatashin@soleen.com
Signed-off-by: Will Deacon <will@kernel.org>
Currently, kernel relocation function is configured in machine_kexec()
at the time of kexec reboot by using control_code_page.
This operation, however, is more logical to be done during kexec_load,
and thus remove from reboot time. Move, setup of this function to
newly added machine_kexec_post_load().
Because once MMU is enabled, kexec control page will contain more than
relocation kernel, but also vector table, add pointer to the actual
function within this page arch.kern_reloc. Currently, it equals to the
beginning of page, we will add offsets later, when vector table is
added.
Signed-off-by: Pavel Tatashin <pasha.tatashin@soleen.com>
Reviewed-by: James Morse <james.morse@arm.com>
Link: https://lore.kernel.org/r/20210125191923.1060122-10-pasha.tatashin@soleen.com
Signed-off-by: Will Deacon <will@kernel.org>
To resume from hibernate, the contents of memory are restored from
the swap image. This may overwrite any page, including the running
kernel and its page tables.
Hibernate copies the code it uses to do the restore into a single
page that it knows won't be overwritten, and maps it with page tables
built from pages that won't be overwritten.
Today the address it uses for this mapping is arbitrary, but to allow
kexec to reuse this code, it needs to be idmapped. To idmap the page
we must avoid the kernel helpers that have VA_BITS baked in.
Convert create_single_mapping() to take a single PA, and idmap it.
The page tables are built in the reverse order to normal using
pfn_pte() to stir in any bits between 52:48. T0SZ is always increased
to cover 48bits, or 52 if the copy code has bits 52:48 in its PA.
Signed-off-by: James Morse <james.morse@arm.com>
[Adopted the original patch from James to trans_pgd interface, so it can be
commonly used by both Kexec and Hibernate. Some minor clean-ups.]
Signed-off-by: Pavel Tatashin <pasha.tatashin@soleen.com>
Link: https://lore.kernel.org/linux-arm-kernel/20200115143322.214247-4-james.morse@arm.com/
Link: https://lore.kernel.org/r/20210125191923.1060122-9-pasha.tatashin@soleen.com
Signed-off-by: Will Deacon <will@kernel.org>
Because only the idmap sets a non-standard T0SZ, __cpu_set_tcr_t0sz()
can check for platforms that need to do this using
__cpu_uses_extended_idmap() before doing its work.
The idmap is only built with enough levels, (and T0SZ bits) to map
its single page.
To allow hibernate, and then kexec to idmap their single page copy
routines, __cpu_set_tcr_t0sz() needs to consider additional users,
who may need a different number of levels/T0SZ-bits to the idmap.
(i.e. VA_BITS may be enough for the idmap, but not hibernate/kexec)
Always read TCR_EL1, and check whether any work needs doing for
this request. __cpu_uses_extended_idmap() remains as it is used
by KVM, whose idmap is also part of the kernel image.
This mostly affects the cpuidle path, where we now get an extra
system register read .
CC: Lorenzo Pieralisi <Lorenzo.Pieralisi@arm.com>
CC: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Pavel Tatashin <pasha.tatashin@soleen.com>
Link: https://lore.kernel.org/r/20210125191923.1060122-8-pasha.tatashin@soleen.com
Signed-off-by: Will Deacon <will@kernel.org>
trans_pgd_* should be independent from mm context because the tables that
are created by this code are used when there are no mm context around, as
it is between kernels. Simply replace mm_init's with NULL.
Signed-off-by: Pavel Tatashin <pasha.tatashin@soleen.com>
Acked-by: James Morse <james.morse@arm.com>
Link: https://lore.kernel.org/r/20210125191923.1060122-7-pasha.tatashin@soleen.com
Signed-off-by: Will Deacon <will@kernel.org>
Make trans_pgd_create_copy and its subroutines to use allocator that is
passed as an argument
Signed-off-by: Pavel Tatashin <pasha.tatashin@soleen.com>
Reviewed-by: James Morse <james.morse@arm.com>
Link: https://lore.kernel.org/r/20210125191923.1060122-6-pasha.tatashin@soleen.com
Signed-off-by: Will Deacon <will@kernel.org>
kexec is going to use a different allocator, so make
trans_pgd_map_page to accept allocator as an argument, and also
kexec is going to use a different map protection, so also pass
it via argument.
Signed-off-by: Pavel Tatashin <pasha.tatashin@soleen.com>
Reviewed-by: Matthias Brugger <mbrugger@suse.com>
Link: https://lore.kernel.org/r/20210125191923.1060122-5-pasha.tatashin@soleen.com
Signed-off-by: Will Deacon <will@kernel.org>
Now, that we abstracted the required functions move them to a new home.
Later, we will generalize these function in order to be useful outside
of hibernation.
Signed-off-by: Pavel Tatashin <pasha.tatashin@soleen.com>
Reviewed-by: James Morse <james.morse@arm.com>
Link: https://lore.kernel.org/r/20210125191923.1060122-4-pasha.tatashin@soleen.com
Signed-off-by: Will Deacon <will@kernel.org>
There should be p4dp used when p4d page is allocated.
This is not a functional issue, but for the logical correctness this
should be fixed.
Fixes: e9f6376858 ("arm64: add support for folded p4d page tables")
Signed-off-by: Pavel Tatashin <pasha.tatashin@soleen.com>
Link: https://lore.kernel.org/r/20210125191923.1060122-3-pasha.tatashin@soleen.com
Signed-off-by: Will Deacon <will@kernel.org>
Currently, dtb_mem is enabled only when CONFIG_KEXEC_FILE is
enabled. This adds ugly ifdefs to c files.
Always enabled dtb_mem, when it is not used, it is NULL.
Change the dtb_mem to phys_addr_t, as it is a physical address.
Signed-off-by: Pavel Tatashin <pasha.tatashin@soleen.com>
Reviewed-by: James Morse <james.morse@arm.com>
Link: https://lore.kernel.org/r/20210125191923.1060122-2-pasha.tatashin@soleen.com
Signed-off-by: Will Deacon <will@kernel.org>
Commit 507d664450 ("arm64: mm: Remove unused header file") removed
a bunch of apparently "unused" header inclusions from our mm/mmap.c
implementation, but in doing so introduced the following warning when
building with W=1:
>> arch/arm64/mm/mmap.c:17:5: warning: no previous prototype for 'valid_phys_addr_range' [-Wmissing-prototypes]
17 | int valid_phys_addr_range(phys_addr_t addr, size_t size)
| ^~~~~~~~~~~~~~~~~~~~~
>> arch/arm64/mm/mmap.c:36:5: warning: no previous prototype for 'valid_mmap_phys_addr_range' [-Wmissing-prototypes]
36 | int valid_mmap_phys_addr_range(unsigned long pfn, size_t size)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~
Add back the linux/io.h header inclusion to pull in the missing
prototypes.
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/r/202101271438.V9TmBC31-lkp@intel.com
Signed-off-by: Will Deacon <will@kernel.org>
Remove SATA from Stingray as it is unsupported.
Acked-by: Ray Jui <ray.jui@broadcom.com>
Signed-off-by: Scott Branden <scott.branden@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
BCM4908 has internal switch with 5 GPHYs. Ports 0 - 3 are always
connected to the internal PHYs. Remaining ports depend on device setup.
Asus GT-AC5300 has an extra switch with its PHYs accessible using the
internal MDIO.
CPU port and Ethernet interface remain to be documented.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Remove stale comment since commit a7ba121215 ("arm64: use asm-generic/cacheflush.h")
Cc: Christoph Hellwig <hch@lst.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com>
Link: https://lore.kernel.org/r/1611575753-36435-1-git-send-email-zhangshaokun@hisilicon.com
Signed-off-by: Will Deacon <will@kernel.org>
Enable support for audio-graph based sound card on Jetson-Nano and
Jetson-TX1. Depending on the platform, required I/O interfaces are
enabled.
* Jetson-Nano: Enable I2S3, I2S4, DMIC1 and DMIC2.
* Jetson-TX1: Enable all I2S and DMIC interfaces.
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Expose a header which describes DT bindings required to use audio-graph
based sound card. All Tegra210 based platforms can include this header
and add platform specific information. Currently, from SoC point of view,
all links are exposed for ADMAIF, AHUB, I2S and DMIC components.
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Device tree nodes are ordered by unit-address and alphabetically by name
if a node doesn't have a unit-address. The thermal sensor and timer
nodes were not sorted in the correct order, so do that now.
Signed-off-by: Thierry Reding <treding@nvidia.com>
This commit enables USB host mode at J512 type-C port of Jetson-Xavier.
Signed-off-by: JC Kuo <jckuo@nvidia.com>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
PMC driver provides USB sleepwalk registers access to XUSB PADCTL
driver. This commit adds a "nvidia,pmc" property which points to
PMC node to XUSB PADCTL device node.
Signed-off-by: JC Kuo <jckuo@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
HDA initialization is failing occasionally on Tegra210 and following
print is observed in the boot log. Because of this probe() fails and
no sound card is registered.
[16.800802] tegra-hda 70030000.hda: no codecs found!
Codecs request a state change and enumeration by the controller. In
failure cases this does not seem to happen as STATETS register reads 0.
The problem seems to be related to the HDA codec dependency on SOR
power domain. If it is gated during HDA probe then the failure is
observed. Building Tegra HDA driver into kernel image avoids this
failure but does not completely address the dependency part. Fix this
problem by adding 'power-domains' DT property for Tegra210 HDA. Note
that Tegra186 and Tegra194 HDA do this already.
Fixes: 742af7e7a0 ("arm64: tegra: Add Tegra210 support")
Depends-on: 96d1f078ff ("arm64: tegra: Add SOR power-domain for Tegra210")
Cc: <stable@vger.kernel.org>
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Devicetree patches for SDM845 introduced in v5.11 requires the
platform's interconnect driver to be buildin, or the kernel will fail to
provide a valid console when we hit userspace.
-----BEGIN PGP SIGNATURE-----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=DQAs
-----END PGP SIGNATURE-----
Merge tag 'qcom-arm64-defconfig-fixes-for-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/fixes
Qualcomm ARM64 defconfig fixes for v5.11
Devicetree patches for SDM845 introduced in v5.11 requires the
platform's interconnect driver to be buildin, or the kernel will fail to
provide a valid console when we hit userspace.
* tag 'qcom-arm64-defconfig-fixes-for-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
arm64: defconfig: Make INTERCONNECT_QCOM_SDM845 builtin
Link: https://lore.kernel.org/r/20210125232412.642834-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This fixes a regression in Lenovo Yoga C630, where the touchpad in some
units stopped working, by re-enabling the "tsc2" device.
It also marks the LPASS related clocks as protected to allow DB845c and
the Lenovo Yoga C630 to boot even if CONFIG_SDM_LPASSCC_845 is enabled.
-----BEGIN PGP SIGNATURE-----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=E0WN
-----END PGP SIGNATURE-----
Merge tag 'qcom-arm64-fixes-for-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/fixes
Qualcomm ARM64 fixes for 5.11
This fixes a regression in Lenovo Yoga C630, where the touchpad in some
units stopped working, by re-enabling the "tsc2" device.
It also marks the LPASS related clocks as protected to allow DB845c and
the Lenovo Yoga C630 to boot even if CONFIG_SDM_LPASSCC_845 is enabled.
* tag 'qcom-arm64-fixes-for-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
arm64: dts: qcom: sdm845: Reserve LPASS clocks in gcc
arm64: dts: qcom: c630: keep both touchpad devices enabled
Link: https://lore.kernel.org/r/20210125232039.642565-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
