The ARM architected timer specification mandates that the interrupt
associated with each timer is level triggered (which corresponds to
the "counter >= comparator" condition).
A number of DTs are being remarkably creative, declaring the interrupt
to be edge triggered. A quick look at the TRM for the corresponding ARM
CPUs clearly shows that this is wrong, and I've corrected those.
For non-ARM designs (and in the absence of a publicly available TRM),
I've made them active low as well, which can't be completely wrong
as the GIC cannot disinguish between level low and level high.
The respective maintainers are of course welcome to prove me wrong.
While I was at it, I took the liberty to fix a couple of related issue,
such as some spurious affinity bits on ThunderX, and their complete
absence on ls1043a (both of which seem to be related to copy-pasting
from other DTs).
Acked-by: Duc Dang <dhdang@apm.com>
Acked-by: Carlo Caione <carlo@endlessm.com>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Acked-by: Dinh Nguyen <dinguyen@opensource.altera.com>
Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Driver updates for ARM SoCs.
A slew of changes this release cycle. The reset driver tree, that we merge
through arm-soc for historical reasons, is also sizable this time around.
Among the changes:
- clps711x: Treewide changes to compatible strings, merged here for simplicity.
- Qualcomm: SCM firmware driver cleanups, move to platform driver
- ux500: Major cleanups, removal of old mach-specific infrastructure.
- Atmel external bus memory driver
- Move of brcmstb platform to the rest of bcm
- PMC driver updates for tegra, various fixes and improvements
- Samsung platform driver updates to support 64-bit Exynos platforms
- Reset controller cleanups moving to devm_reset_controller_register() APIs
- Reset controller driver for Amlogic Meson
- Reset controller driver for Hisilicon hi6220
- ARM SCPI power domain support
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABAgAGBQJXnm1XAAoJEIwa5zzehBx35lcP/ApuQarIXeZCQZtjlUBV9McW
o3o7FhKFHePmEPeoYCvVeK5D8NykTkQv3WpnCknoxPJzxGJF7jbPWQJcVnXfKOXD
kTcyIK15WL2HHtSE3lYyLfyUPz8AbJyRt0l0cxgcg6jvo+uzlWooNz1y78rLIYzg
UwRssj7OiHv4dsyYRHZIsjnB8gMWw8rYMk154gP2xy6MnNXXzzOVVnOiVqxSZBm+
EgIIcROMOqkkHuFlClMYKluIgrmgz1Ypjf+FuAg7dqXZd+TGRrmGXeI7SkGThfLu
nyvY3N18NViNu7xOUkI9zg7+ifyYM8Si9ylalSICSJdIAxZfiwFqFaLJvVWKU1rY
rBOBjKckQI0/X9WYusFNFHcijhIFV8/FgGAnVRRMPdvlCss7Zp03C9mR4AEhmKMX
rLG49x81hU1C+LftC59ml3iB8dhZrrRkbxNHjLFHVGWNrKMrmJKa8JhXGRAoNM+u
LRauiuJZatqvLfISNvpfcoW2EashVoU3f+uC8ymT3QCyME3wZm0t7T4tllxhMfBl
sOgJqNkTKDmPLofwm/dASiLML7ZF1WePScrFyOACnj9K4mUD+OaCnowtWoQPu0eI
aNmT84oosJ2S9F/iUDPtFHXdzQ+1QPPfSiQ9FXMoauciVq/2F+pqq68yYgqoxFOG
vmkmG2YM4Wyq43u0BONR
=O8+y
-----END PGP SIGNATURE-----
Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC driver updates from Olof Johansson:
"Driver updates for ARM SoCs.
A slew of changes this release cycle. The reset driver tree, that we
merge through arm-soc for historical reasons, is also sizable this
time around.
Among the changes:
- clps711x: Treewide changes to compatible strings, merged here for simplicity.
- Qualcomm: SCM firmware driver cleanups, move to platform driver
- ux500: Major cleanups, removal of old mach-specific infrastructure.
- Atmel external bus memory driver
- Move of brcmstb platform to the rest of bcm
- PMC driver updates for tegra, various fixes and improvements
- Samsung platform driver updates to support 64-bit Exynos platforms
- Reset controller cleanups moving to devm_reset_controller_register() APIs
- Reset controller driver for Amlogic Meson
- Reset controller driver for Hisilicon hi6220
- ARM SCPI power domain support"
* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (100 commits)
ARM: ux500: consolidate base platform files
ARM: ux500: move soc_id driver to drivers/soc
ARM: ux500: call ux500_setup_id later
ARM: ux500: consolidate soc_device code in id.c
ARM: ux500: remove cpu_is_u* helpers
ARM: ux500: use CLK_OF_DECLARE()
ARM: ux500: move l2x0 init to .init_irq
mfd: db8500 stop passing around platform data
ASoC: ab8500-codec: remove platform data based probe
ARM: ux500: move ab8500_regulator_plat_data into driver
ARM: ux500: remove unused regulator data
soc: raspberrypi-power: add CONFIG_OF dependency
firmware: scpi: add CONFIG_OF dependency
video: clps711x-fb: Changing the compatibility string to match with the smallest supported chip
input: clps711x-keypad: Changing the compatibility string to match with the smallest supported chip
pwm: clps711x: Changing the compatibility string to match with the smallest supported chip
serial: clps711x: Changing the compatibility string to match with the smallest supported chip
irqchip: clps711x: Changing the compatibility string to match with the smallest supported chip
clocksource: clps711x: Changing the compatibility string to match with the smallest supported chip
clk: clps711x: Changing the compatibility string to match with the smallest supported chip
...
Pull networking updates from David Miller:
1) Unified UDP encapsulation offload methods for drivers, from
Alexander Duyck.
2) Make DSA binding more sane, from Andrew Lunn.
3) Support QCA9888 chips in ath10k, from Anilkumar Kolli.
4) Several workqueue usage cleanups, from Bhaktipriya Shridhar.
5) Add XDP (eXpress Data Path), essentially running BPF programs on RX
packets as soon as the device sees them, with the option to mirror
the packet on TX via the same interface. From Brenden Blanco and
others.
6) Allow qdisc/class stats dumps to run lockless, from Eric Dumazet.
7) Add VLAN support to b53 and bcm_sf2, from Florian Fainelli.
8) Simplify netlink conntrack entry layout, from Florian Westphal.
9) Add ipv4 forwarding support to mlxsw spectrum driver, from Ido
Schimmel, Yotam Gigi, and Jiri Pirko.
10) Add SKB array infrastructure and convert tun and macvtap over to it.
From Michael S Tsirkin and Jason Wang.
11) Support qdisc packet injection in pktgen, from John Fastabend.
12) Add neighbour monitoring framework to TIPC, from Jon Paul Maloy.
13) Add NV congestion control support to TCP, from Lawrence Brakmo.
14) Add GSO support to SCTP, from Marcelo Ricardo Leitner.
15) Allow GRO and RPS to function on macsec devices, from Paolo Abeni.
16) Support MPLS over IPV4, from Simon Horman.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1622 commits)
xgene: Fix build warning with ACPI disabled.
be2net: perform temperature query in adapter regardless of its interface state
l2tp: Correctly return -EBADF from pppol2tp_getname.
net/mlx5_core/health: Remove deprecated create_singlethread_workqueue
net: ipmr/ip6mr: update lastuse on entry change
macsec: ensure rx_sa is set when validation is disabled
tipc: dump monitor attributes
tipc: add a function to get the bearer name
tipc: get monitor threshold for the cluster
tipc: make cluster size threshold for monitoring configurable
tipc: introduce constants for tipc address validation
net: neigh: disallow transition to NUD_STALE if lladdr is unchanged in neigh_update()
MAINTAINERS: xgene: Add driver and documentation path
Documentation: dtb: xgene: Add MDIO node
dtb: xgene: Add MDIO node
drivers: net: xgene: ethtool: Use phy_ethtool_gset and sset
drivers: net: xgene: Use exported functions
drivers: net: xgene: Enable MDIO driver
drivers: net: xgene: Add backward compatibility
drivers: net: phy: xgene: Add MDIO driver
...
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=mrOW
-----END PGP SIGNATURE-----
Merge tag 'media/v4.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- new framework support for HDMI CEC and remote control support
- new encoding codec driver for Mediatek SoC
- new frontend driver: helene tuner
- added support for NetUp almost universal devices, with supports
DVB-C/S/S2/T/T2 and ISDB-T
- the mn88472 frontend driver got promoted from staging
- a new driver for RCar video input
- some soc_camera legacy drivers got removed: timb, omap1, mx2, mx3
- lots of driver cleanups, improvements and fixups
* tag 'media/v4.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (377 commits)
[media] cec: always check all_device_types and features
[media] cec: poll should check if there is room in the tx queue
[media] vivid: support monitor all mode
[media] cec: fix test for unconfigured adapter in main message loop
[media] cec: limit the size of the transmit queue
[media] cec: zero unused msg part after msg->len
[media] cec: don't set fh to NULL in CEC_TRANSMIT
[media] cec: clear all status fields before transmit and always fill in sequence
[media] cec: CEC_RECEIVE overwrote the timeout field
[media] cxd2841er: Reading SNR for DVB-C added
[media] cxd2841er: Reading BER and UCB for DVB-C added
[media] cxd2841er: fix switch-case for DVB-C
[media] cxd2841er: fix signal strength scale for ISDB-T
[media] cxd2841er: adjust the dB scale for DVB-C
[media] cxd2841er: provide signal strength for DVB-C
[media] cxd2841er: fix BER report via DVBv5 stats API
[media] mb86a20s: apply mask to val after checking for read failure
[media] airspy: fix error logic during device register
[media] s5p-cec/TODO: add TODO item
[media] cec/TODO: drop comment about sphinx documentation
...
Add the SoC-level description of the PCIe controller found on the Marvell
Armada 3700 and enable this PCIe controller on the development board for
this SoC.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Pull crypto updates from Herbert Xu:
"Here is the crypto update for 4.8:
API:
- first part of skcipher low-level conversions
- add KPP (Key-agreement Protocol Primitives) interface.
Algorithms:
- fix IPsec/cryptd reordering issues that affects aesni
- RSA no longer does explicit leading zero removal
- add SHA3
- add DH
- add ECDH
- improve DRBG performance by not doing CTR by hand
Drivers:
- add x86 AVX2 multibuffer SHA256/512
- add POWER8 optimised crc32c
- add xts support to vmx
- add DH support to qat
- add RSA support to caam
- add Layerscape support to caam
- add SEC1 AEAD support to talitos
- improve performance by chaining requests in marvell/cesa
- add support for Araneus Alea I USB RNG
- add support for Broadcom BCM5301 RNG
- add support for Amlogic Meson RNG
- add support Broadcom NSP SoC RNG"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (180 commits)
crypto: vmx - Fix aes_p8_xts_decrypt build failure
crypto: vmx - Ignore generated files
crypto: vmx - Adding support for XTS
crypto: vmx - Adding asm subroutines for XTS
crypto: skcipher - add comment for skcipher_alg->base
crypto: testmgr - Print akcipher algorithm name
crypto: marvell - Fix wrong flag used for GFP in mv_cesa_dma_add_iv_op
crypto: nx - off by one bug in nx_of_update_msc()
crypto: rsa-pkcs1pad - fix rsa-pkcs1pad request struct
crypto: scatterwalk - Inline start/map/done
crypto: scatterwalk - Remove unnecessary BUG in scatterwalk_start
crypto: scatterwalk - Remove unnecessary advance in scatterwalk_pagedone
crypto: scatterwalk - Fix test in scatterwalk_done
crypto: api - Optimise away crypto_yield when hard preemption is on
crypto: scatterwalk - add no-copy support to copychunks
crypto: scatterwalk - Remove scatterwalk_bytes_sglen
crypto: omap - Stop using crypto scatterwalk_bytes_sglen
crypto: skcipher - Remove top-level givcipher interface
crypto: user - Remove crypto_lookup_skcipher call
crypto: cts - Convert to skcipher
...
Added mdio node for mdio driver. Also added phy-handle
reference to the ethernet nodes.
Removed unused clock node from storm sgenet1.
Signed-off-by: Iyappan Subramanian <isubramanian@apm.com>
Tested-by: Fushen Chen <fchen@apm.com>
Tested-by: Toan Le <toanle@apm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
A slew of updates for Tegra210 support: PMIC and regulator additions,
which in turn allow a bunch of features to be enabled. Some assemblies
of the Jetson TX1 come with a DSI panel that is now supported. For all
other assemblies, this set of changes enables the HDMI output. Jetson
TX1 can now also make use of the XUSB controller.
PMIC and regulator support is also added for Smaug, which will allow a
number of interesting feature additions in future releases.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQIcBAABCAAGBQJXh6TbAAoJEN0jrNd/PrOh5oIP/1y4Qmn/et6hR62t6qbvRIGW
muaa+YTCI/kUscPdzissnkEytcEnVDHeRscybgB9LAz2q6r5Hudqsf/nLggpoUak
4dbOFcWc4UBcfzF+/glgByrtpe6m6gnjw7m/LSkKENHl4+pCGtOwo9jsJlwvnPZ0
H2MQ/UMgCvCGprxiY6l115g1GelamgPGJ1ZPLjGfEGa42mzRb1vHuFtzsI+qFIZc
Qi6leSBd+NJCiAgp1Sfzmx/XV3uasuXNmv91t3vJWJly0AbQMF0s3PlMfDIRH9ZP
YaltAXfFXzzsZJ1yKENnFz34DnWY07x2VKkaf+8jBweur7/TgOaciAg9SQd5rSPm
oHE5gLDo/82FOlfA+6rQ05b3KbQgFiwh1MlO3bODx3rSm/+wNc6Otv7rPQ0nBbG3
sGzqMudSLxr6azqCardk29l95dTFHtR0OvHmkwQVSffvHLp2Q1htQrONZM0au9ZH
QKGl1HSwEdpF5fDaacYwxNQV+zgLrGNH1UbIi/b6OHI0sVRZc/iyKo31vAIBQPmE
audMiMKj68FmI+m8AyBLIl9xsDCfLA+m3KlBO/2mVNm7fTNh344SJbx/QV6rTHP3
FtPC4Usmf9xwBdULDeRdV60yvQXqcpa0rBE8PzuZ3/siJP8eFjzLrI8bYXhtSJo+
cJx7V6o0Y0sc5PjNPA3y
=3zUA
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-4.8-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/late
Merge "arm64: tegra: Device tree changes for v4.8-rc1" from Thierry Reding:
A slew of updates for Tegra210 support: PMIC and regulator additions,
which in turn allow a bunch of features to be enabled. Some assemblies
of the Jetson TX1 come with a DSI panel that is now supported. For all
other assemblies, this set of changes enables the HDMI output. Jetson
TX1 can now also make use of the XUSB controller.
PMIC and regulator support is also added for Smaug, which will allow a
number of interesting feature additions in future releases.
* tag 'tegra-for-4.8-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
arm64: tegra: Enable HDMI on Jetson TX1
arm64: tegra: Add sor1_src clock
arm64: tegra: Add XUSB powergates on Tegra210
arm64: tegra: Add DPAUX pinctrl bindings
arm64: tegra: Add ACONNECT bus node for Tegra210
arm64: tegra: Add audio powergate node for Tegra210
arm64: tegra: Add regulators for Tegra210 Smaug
arm64: tegra: Correct Tegra210 XUSB mailbox interrupt
arm64: tegra: Enable XUSB controller on Jetson TX1
arm64: tegra: Enable debug serial on Jetson TX1
arm64: tegra: Add Tegra210 XUSB controller
arm64: tegra: Add Tegra210 XUSB pad controller
arm64: tegra: Add DSI panel on Jetson TX1
arm64: tegra: p2597: Add SDMMC power supplies
arm64: tegra: Add PMIC support on Jetson TX1
Merge "ARM64: DT: Hisilicon Hi6220 updates for 4.8" from Wei Xu:
- Add pl031 rtc0 and rtc1 support for hi6220 SoC
* tag 'hi6220-dt-for-4.8-2' of git://github.com/hisilicon/linux-hisi:
arm64: dts: hi6220: Add pl031 RTC support
clk: hi6220: Add RTC clock for pl031
The sor1 IP block needs the sor1_src clock to configure the clock tree
depending on whether it's running in HDMI or DP mode.
Signed-off-by: Thierry Reding <treding@nvidia.com>
The Tegra210 XUSB subsystem has 3 power partitions which are XUSBA
(super-speed logic), XUSBB (USB device logic) and XUSBC (USB host
logic). Populate the device-tree nodes for these XUSB partitions.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add the DPAUX pinctrl states for the DPAUX nodes defining all three
possible states of "aux", "i2c" and "off". Also add the 'i2c-bus'
node for the DPAUX nodes so that the I2C driver core does not attempt
to parse the pinctrl state nodes.
Populate the nodes for the pinctrl clients of the DPAUX pin controller.
There are two clients for each DPAUX instance, namely the SOR and one of
the I2C adapters. The SOR clients may used the DPAUX pins in either AUX
or I2C modes and so for these devices we don't define any of the generic
pinctrl states (default, idle, etc) because the SOR driver will directly
set the state needed. For I2C clients only the I2C mode is used and so
we can simplify matters by using the generic pinctrl states for default
and idle.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add the ACONNECT bus node for Tegra210 which is used to interface to
the various devices in the Audio Processing Engine (APE).
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add regulators to the Tegra210 Smaug DTS file including support for the
MAX77620 PMIC.
Signed-off-by: Rhyland Klein <rklein@nvidia.com>
Acked-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The XUSB mailbox interrupt for Tegra210 is 40 and not 49 which is for
the XUSB pad controller. For some Tegra210 boards, this is causing USB
connect and disconnect events to go undetected. Fix this by changing the
interrupt number for the XUSB mailbox to 40.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Enable the XUSB controller on Jetson TX1. One of the USB 3.0 lanes goes
to an internal ethernet interface, while a second USB 3.0 lane supports
the USB-A receptacle on the I/O board.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add a chosen node to the device tree that contains a stdout-path
property which defines the debug serial port.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add a device tree node for the Tegra XUSB controller. It contains a
phandle to the XUSB pad controller for control of the PHYs assigned
to the USB ports.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add power supplies for the SD/MMC card slot. Note that vmmc-supply is
currently restricted to 3.3 V because we don't support switching the
mode yet.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add a device tree node for the MAX77620 PMIC found on the p2180
processor module (Jetson TX1). Also add supporting power supplies,
such as the main 5 V system supply.
Signed-off-by: Thierry Reding <treding@nvidia.com>
1. Adjust the voltage of CPU buck regulator so scaling could work.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=ku6i
-----END PGP SIGNATURE-----
Merge tag 'samsung-dt64-4.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/dt64
Merge "Samsung DeviceTree changes for ARM64 for v4.8" from Krzysztof Kozlowski:
1. Adjust the voltage of CPU buck regulator so scaling could work.
* tag 'samsung-dt64-4.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
arm64: dts: exynos: Modify the voltage range for BUCK2 for exynos7
1. Adds various CoreSight debug components on Juno boards
2. Adds SCPI device power domains and use them for coresight components
3. Adds thermal zones for SCPI sensors on Juno
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=bxrw
-----END PGP SIGNATURE-----
Merge tag 'juno-dt-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into next/dt64
Merge "Juno platform DT updates for v4.8" from Sudeep Holla:
1. Adds various CoreSight debug components on Juno boards
2. Adds SCPI device power domains and use them for coresight components
3. Adds thermal zones for SCPI sensors on Juno
* tag 'juno-dt-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
arm64: dts: juno: add thermal zones for scpi sensors
arm64: dts: juno: add SCPI power domains for device power management
arm64: dts: juno: add coresight support
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJXefulAAoJEHm+PkMAQRiG6nMH/2O1vcZeOtqmx2yCMUeXyKAT
wG88XflXzf3rM7C7TiObEYVf/bbLleJ7saDLEeic7ButD5gyYacIuzylVnrcqfBc
vinz4cOw5kvu9DrRkCKdOfiTAgwYtqQW+syJ8ZK4lPQuSxnPAs+F/FKSOpyUF5FN
Dngr520KjYKBEtn27W9UDPChFRwQoWAlaOC534eusaArCJtHGHHiuq5TEDn2EIo8
pUw2vwx5JiquSHOY34WLU7r+QoilovCQlUSsBQdLlPjfMB1QFtclPYa+5yEMjkT4
wusOUOfS/zK0rV6KnEdc/SkpiVX5C9WpFiWUOdEeJ5mZ+KijVkaOa9K1EDx8jSM=
=7Hwh
-----END PGP SIGNATURE-----
Merge tag 'v4.7-rc6' into patchwork
Linux 4.7-rc6
* tag 'v4.7-rc6': (1245 commits)
Linux 4.7-rc6
ovl: warn instead of error if d_type is not supported
MIPS: Fix possible corruption of cache mode by mprotect.
locks: use file_inode()
usb: dwc3: st: Use explicit reset_control_get_exclusive() API
phy: phy-stih407-usb: Use explicit reset_control_get_exclusive() API
phy: miphy28lp: Inform the reset framework that our reset line may be shared
namespace: update event counter when umounting a deleted dentry
9p: use file_dentry()
lockd: unregister notifier blocks if the service fails to come up completely
ACPI,PCI,IRQ: correct operator precedence
fuse: serialize dirops by default
drm/i915: Fix missing unlock on error in i915_ppgtt_info()
powerpc: Initialise pci_io_base as early as possible
mfd: da9053: Fix compiler warning message for uninitialised variable
mfd: max77620: Fix FPS switch statements
phy: phy-stih407-usb: Inform the reset framework that our reset line may be shared
usb: dwc3: st: Inform the reset framework that our reset line may be shared
usb: host: ehci-st: Inform the reset framework that our reset line may be shared
usb: host: ohci-st: Inform the reset framework that our reset line may be shared
...
Add video encoder node for MT8173
Signed-off-by: Tiffany Lin <tiffany.lin@mediatek.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
This reverts commit f3abd62961, which caused a build regression:
arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi:48:41: fatal error: dt-bindings/clock/gxbb-clkc.h: No such file or directory
We should apply this patch one merge window later, once the clk branch
is merged as well.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
changes for 4.8. Please note that this pull request contains changes from the
ARM 32-bits port and ARM 64-bits port as well:
- Lubomir updates all BCM2835 (Raspberry Pi family) Device Tree source files with
their proper information about the on-board USB Ethernet adapter so there is
appropriate binding between this USB device and a device_node (useful for MAC
address fetching and stuff), this commit is also present for the ARM DT pull
request
- Eric adds support for the Raspberry Pi 3 aka BCM2837 and provides the binding
information and the basic SoC DT include file required to boot to a prompt
- Gerd updates the Raspberry Pi 3 DT with Ethernet information based on the
earlier change from Lubomir
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=KQmU
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-4.8/devicetree-arm64-part2' of http://github.com/Broadcom/stblinux into next/dt64
Merge "Broadcom ARM64 Device Tree changes for 4.8 (part 2)" from Florian Fainelli:
This pull request contains the second part of the Broadcom ARM64-based SoCs
changes for 4.8. Please note that this pull request contains changes from the
ARM 32-bits port and ARM 64-bits port as well:
- Lubomir updates all BCM2835 (Raspberry Pi family) Device Tree source files with
their proper information about the on-board USB Ethernet adapter so there is
appropriate binding between this USB device and a device_node (useful for MAC
address fetching and stuff), this commit is also present for the ARM DT pull
request
- Eric adds support for the Raspberry Pi 3 aka BCM2837 and provides the binding
information and the basic SoC DT include file required to boot to a prompt
- Gerd updates the Raspberry Pi 3 DT with Ethernet information based on the
earlier change from Lubomir
* tag 'arm-soc/for-4.8/devicetree-arm64-part2' of http://github.com/Broadcom/stblinux:
ARM: bcm2837: dt: Add the ethernet to the device trees
ARM: bcm2835: Add devicetree for the Raspberry Pi 3.
dt-bindings: Add root properties for Raspberry Pi 3
ARM: bcm2835: dt: Add the ethernet to the device trees
Pull the clockevents/clocksource tree from Daniel Lezcano:
- Convert the clocksource-probe init functions to return a value in order to
prepare the consolidation of the drivers using the DT. It is a big patchset
but went through 01.org (kbuild bot), linux next and kernel-ci (continuous
integration) (Daniel Lezcano)
- Fix a bad error handling by returning the right value for cadence_ttc
(Christophe Jaillet)
- Fix typo in the Kconfig for the Samsung pwm (Alexandre Belloni)
- Change functions to static for armada-370-xp and digicolor (Ben Dooks)
- Add support for the rk3399 SoC timer by adding bindings and a slight
change in the base address. Take the opportunity to add the DYNIRQ flag
(Huang Tao)
- Fix endian accessors for the Samsung pwm timer (Matthew Leach)
- Add Oxford Semiconductor RPS Dual Timer driver (Neil Armstrong)
- Add a kernel parameter to swich on/off the event stream feature of the arch
arm timer (Will Deacon)
- update dt with mv-xor-v2 found in the Armada 7K/8K SoCs
- update dt with the clocks found in the Armada 3700 SoCs
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iEYEABECAAYFAld6y2sACgkQCwYYjhRyO9UU9wCgpZ7Nd5KeqQMuwOPL/RNjIg6F
oHsAoKcUVoQteML8NkpMeyr9Lk+dtb0A
=OElN
-----END PGP SIGNATURE-----
Merge tag 'mvebu-dt64-4.8-1' of git://git.infradead.org/linux-mvebu into next/dt64
Merge "mvebu dt64 for 4.8 (part 1)" from Gregory CLEMENT:
- update dt with mv-xor-v2 found in the Armada 7K/8K SoCs
- update dt with the clocks found in the Armada 3700 SoCs
* tag 'mvebu-dt64-4.8-1' of git://git.infradead.org/linux-mvebu:
arm64: dts: marvell: add peripherals clocks for Armada 37xx
arm64: dts: marvell: add tbg clocks for Armada 37xx
arm64: dts: marvell: Add xtal clock support for Armada 3700
arm64: dts: marvell: add XOR engine description for Armada 7K/8K CP
arm64: dts: marvell: adjust to the latest mv-xor-v2 DT binding
Enable the Watchdog Timer (WDT) controller on the Renesas Salvator-X
board equipped with an R-Car M3-W (r8a7796) SoC.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Add a device node for the Watchdog Timer (WDT) controller on the Renesas
R-Car M3-W (r8a7796) SoC.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Hook up all devices that are part of the CPG/MSSR Clock Domain to the
SYSC "always-on" PM Domain, for a more consistent device-power-area
description in DT.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Add a device node for the System Controller.
Hook up the Cortex-A57 CPU core and L2 cache/SCU to their respective PM
Domains.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Basic support for the Gen 3 R-Car M3-W SoC.
Based on work for the r8a7795 and r8a7796 SoCs by
Takeshi Kihara, Dirk Behme and Geert Uytterhoeven.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Adds CAN FD controller node for r8a7795.
Note: CAN FD controller register base address specified in R-Car Gen3
Hardware User Manual v0.5E is incorrect. The correct address is:
CAN FD - 0xe66c0000
Signed-off-by: Ramesh Shanmugasundaram <ramesh.shanmugasundaram@bp.renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
For consistency with a57_0/a57_1 cpu nodes, and all other nodes.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
i2c and core io-domain nodes and some reasonable default rates
for core clocks. The rk3368 also gets io-domains for its r88 board
as well as a small fix for the gic's memory regions.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABCAAGBQJXdbPUAAoJEPOmecmc0R2BiAUH/2UBBQ1f5A9W5bCtxe+kirFa
R+4tDNske10/h3ey+igciC+6SG4RavHyQn/MoQvu2rzeZvAoPRYi2IVR3/RERf86
uuDNMqI9C0zQNujuiN/1eVMLAhAUoDZ9+uC1uEJ6ilzKwcsk6Sb+8Fo/zQnR8evd
Z4GK+YnJtLvxQ3joEh5AcRbd+CaURjAXeJt1HGlDcLCG8HHKNNDpzaFPV2uaoVXp
1hwx7X8tY5u13K0W7yAzaAq5C4poKa+OpdxlE5g+ryOFWqnqco4l/BBaWg+XK0z5
XvPjtDE5Di8Wpgjeik/4KLwG/maD9ogdPAZGmg+U2SkGlwVdcOSZmSOE2mFHf3c=
=W2eY
-----END PGP SIGNATURE-----
Merge tag 'v4.8-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt64
The rk3399 gets support for its emmc controller as well as thermal,
i2c and core io-domain nodes and some reasonable default rates
for core clocks. The rk3368 also gets io-domains for its r88 board
as well as a small fix for the gic's memory regions.
* tag 'v4.8-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
arm64: dts: rockchip: add ap_pwroff and ddrio_pwroff pins for rk3399
arm64: dts: rockchip: Provide emmcclk to PHY for rk3399
arm64: dts: rockchip: Add soc-ctl-syscon to sdhci for rk3399
arm64: dts: rockchip: fixes the gic400 2nd region size for rk3368
arm64: dts: rockchip: add i2c nodes for rk3399
arm64: dts: rockchip: add thermal nodes for rk3399 SoCs
arm64: dts: rockchip: add rk3399 io-domain core nodes
arm64: dts: rockchip: add rk3368-r88 iodomains
arm64: dts: rockchip: add rk3368 io-domain core nodes
arm64: dts: rockchip: make rk3368 grf syscons simple-mfds
arm64: dts: rockchip: enable eMMC for rk3399 EVB
arm64: dts: rockchip: add sdhci/emmc for rk3399
arm64: dts: rockchip: make rk3399's grf a "simple-mfd"
arm64: dts: rockchip: assign default rates for core rk3399 clocks
Signed-off-by: Olof Johansson <olof@lixom.net>
Change the BUCK2 (vdd_atlas) voltage range to '500 - 1200mv' since
CPU DVFS requires it.
Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
