Commit Graph

7 Commits

Author SHA1 Message Date
Dirk Brandewie
18dbdda89f i2c-designware: Add runtime power management support
Add runtime power management to the PCI driver.

Signed-off-by: Dirk Brandewie <dirk.brandewie@gmail.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2011-10-29 11:03:53 +01:00
Dirk Brandewie
f3fa9f3da5 i2c-designware: Push all register reads/writes into the core code.
Move all register manipulation code into the core, also move register
offset definitions to i2c-designware-core.c since the bus specific
portions of the driver no longer need/use them.

Signed-off-by: Dirk Brandewie <dirk.brandewie@gmail.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2011-10-29 11:03:51 +01:00
Dirk Brandewie
af06cf6c8c i2c-designware: Support multiple cores using same ISR
Add check to make sure that the core is enabled and has outstanding
interrupts. The activity bit is masked due to the fact that it will
stay active even after the controller has been disabled until the
contoller internal state machines have settled.

Signed-off-by: Dirk Brandewie <dirk.brandewie@gmail.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2011-10-29 11:03:51 +01:00
Dirk Brandewie
e18563fc56 i2c-designware: move controller config to bus specific portion of driver
With multiple I2C adapters possible in the system each running at
(possibly) different speeds we need to move the controller
configuration bit field to the adapter.

Signed-off-by: Dirk Brandewie <dirk.brandewie@gmail.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2011-10-29 11:03:50 +01:00
Dirk Brandewie
2fa8326b4b i2c-designware: move i2c functionality bit field to be adapter specific
The functionality of the adapter depends on the configuration of the
IP block at silicon compile time and is adapter specific.

Signed-off-by: Dirk Brandewie <dirk.brandewie@gmail.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2011-10-29 11:03:50 +01:00
Dirk Brandewie
1d31b58f64 i2c-designware: Move retriveving the clock speed out of core code.
The clock frequecy supplied to the IP core is specific to a single
instance of the driver.  This patch makes it possible to have multiple
Designware I2C cores in the system possibly running at different core
frequencies.

Signed-off-by: Dirk Brandewie <dirk.brandewie@gmail.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2011-10-29 11:03:49 +01:00
Dirk Brandewie
2373f6b974 i2c-designware: split of i2c-designware.c into core and bus specific parts
This patch splits i2c-designware.c into three pieces:
     i2c-designware-core.c, contains the code that interacts directly
     with the core.

     i2c-designware-platdrv.c, contains the code specific to the
     platform driver using the core.

     i2c-designware-core.h contains the definitions and declareations
     shared by i2c-designware-core.c and i2c-designware-platdrv.c.

This patch is the first in a set to allow multiple instances of the
designware I2C core in the system.

Signed-off-by: Dirk Brandewie <dirk.brandewie@gmail.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2011-10-29 11:03:39 +01:00