CH7511 doesn't update SINK_COUNT properly so in order to detect
the device as connected we have to ignore SINK_COUNT.
In order to have access to the quirk list early enough we
must move the drm_dp_read_desc() call to happen earlier.
We can also skip re-reading this on eDP since we know it
won't change.
Cc: David S. <david@majinbuu.com>
Cc: Peteris Rudzusiks <peteris.rudzusiks@gmail.com>
Tested-by: Peteris Rudzusiks <peteris.rudzusiks@gmail.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105406
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190528140650.19230-2-ville.syrjala@linux.intel.com
Acked-by: Jani Nikula <jani.nikula@intel.com> #irc
Using "enable_guc" modparam auto mode (-1) will let driver
decide on which platforms and in which configuration we want
to use GuC/HuC firmwares.
Today driver will enable HuC firmware authentication by GuC
only on Gen11+ platforms as HuC firmware is required to unlock
advanced video codecs in media driver.
Legacy platforms with GuC/HuC are not affected by this change
as for them driver still defaults to disabled(0) in auto mode.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190712111445.21040-3-michal.wajdeczko@intel.com
We are about to change default setting of "enable_guc" modparam
from 0(disabled) to -1(auto). As we only want to turn on
GuC/HuC on Gen11+, keep it off for older gens.
Note that it would be still possible to enable GuC/HuC on these
old platforms using explicit "enable_guc=2" modparam.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190712111445.21040-2-michal.wajdeczko@intel.com
Similar to the "_release" and "_remove" cases, consequently replace
"_init" components of names of functions called from
i915_driver_probe() with "_probe" suffixes for better code readability.
Signed-off-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190712112429.740-7-janusz.krzysztofik@linux.intel.com
Similar to the "_release" case, consistently replace mixed
"_cleanup"/"_fini"/"_fini_hw" components found in names of functions
called from i915_driver_remove() with "_remove" or "_driver_remove"
suffixes for better code readability.
Signed-off-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190712112429.740-6-janusz.krzysztofik@linux.intel.com
Replace mixed "_fini"/"_cleanup"/"_cleanup_hw" suffixes found in names
of functions called from i915_driver_release() with "_release" suffix
consistently. This provides better code readability, especially
helpful when trying to work out which phase the code is in.
Functions names starting with "i915_driver_", i.e., those defined in
drivers/gpu/dri/i915/i915_drv.c, just have their "cleanup" or "fini"
parts of their names replaced with the "_release" suffix, while names
of functions coming from other source files have been suffixed with
"_driver_release" to avoid ambiguity with other possible .release entry
points.
v2: early_probe pairs better with late_release (Chris)
v3: fix typo in commit message (Joonas)
Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190712112429.740-5-janusz.krzysztofik@linux.intel.com
Use the "_probe" nomenclature not only in i915_driver_probe() helper
name but also in other related function / variable names for
consistency. Only the userspace exposed name of a related module
parameter is left untouched.
Signed-off-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190712112429.740-4-janusz.krzysztofik@linux.intel.com
Current names of i915_driver_load/unload() functions originate in
legacy DRM stubs. Reduce nomenclature ambiguity by renaming them to
match their current use as helpers called from PCI entry points.
Suggested by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190712112429.740-3-janusz.krzysztofik@linux.intel.com
Follow dim checkpatch recommendation so it doesn't complain on that now
and again on header file modifications.
v2: drop testing leftover (Chris)
Signed-off-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190712112429.740-2-janusz.krzysztofik@linux.intel.com
We can simplify our gtt walking code by comparing against NULL for
scratch entries as opposed to looking up the distinct per-level scratch
pointer.
The only caveat is to remember to protect external parties and map the
NULL to the scratch top pd.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190712094327.24437-6-chris@chris-wilson.co.uk
Each level has its own scratch. Make the levels more obvious by forgoing
the fancy similarly names and replace them with a number. 0 is the bottom
most level, the physical page used for actual data; 1+ are the page
directories.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190712094327.24437-5-chris@chris-wilson.co.uk
We only use the dma pages for scratch, and so do not need to allocate
the extra storage for the shadow page directory.
v2: Refrain from reintroducing I915_PDES
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190712075818.20616-1-chris@chris-wilson.co.uk
There is a debug message in the workaround initialisation path that
reports how many entries were added of each type. However, whitelist
workarounds exist for multiple engines but the type name is just
'whitelist'. Tvrtko suggested adding the engine name to make the
message more useful.
v2: Updated the similar message in the workaround reset selftest.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
CC: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190712070745.35239-4-John.C.Harrison@Intel.com
Newer hardware supports extra feature in the whitelist registers. This
patch updates the selftest to test that entries marked as read only
are actually read only.
v2: Removed all use of 'rsvd' for read-only registers to avoid
ambiguous code or error messages.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
CC: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190712070745.35239-3-John.C.Harrison@Intel.com
As per review feedback by Tvrtko, added a check that no invalid bits
are being set in the whitelist flags fields.
Also updated the read/write access definitions to make it clearer that
they are an enum field not a set of single bit flags.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
CC: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190712070745.35239-2-John.C.Harrison@Intel.com
On TGL the port programming for combophy is very similar to ICL, so
adapt the callers to possibly use the different register values.
v2 (Lucas): Add TODO with about DPLL4 (requested by Ville)
Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190711173115.28296-21-lucas.demarchi@intel.com
Make the icl function generic so it is based on phy type and can be
applied to tgl as well.
I checked if this could not apply to EHL as well, but unfortunately
there the HPD and DDC/GMBUS pins for DDI C are mapped to TypeC Port 1
even though it doesn't have TC phy.
v2: don't add a separate function for TGL, but rather reuse the ICL one
(suggested by Rodrigo)
v3: rebase after the introduction of enum phy and use it for the
conversions
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190711173115.28296-19-lucas.demarchi@intel.com
Add default GPIO pin mapping for all ports. Tiger Lake has 3 combophy
ports and 6 TC ports, gpio pin1-3 are mapped to combophy & pin9-14 are
mapped to TC ports.
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Mahesh Kumar <mahesh1.kumar@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190711173115.28296-18-lucas.demarchi@intel.com
Previously, the recommended B credit for all platforms was 24 / number
of pipes, which would give 6 for newer platforms with 4 pipes. However 6
is not enough and we need 12 on these cases.
We also need a different BW credit for these platforms.
Cc: Arthur J Runyan <arthur.j.runyan@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190711173115.28296-17-lucas.demarchi@intel.com
This patch initializes DDI PORT A, B & C for Tiger lake. Other
TC ports need to be initialized later once corresponding code is there.
Cc: Madhav Chauhan <madhav.chauhan@intel.com>
Signed-off-by: Mahesh Kumar <mahesh1.kumar@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190711173115.28296-15-lucas.demarchi@intel.com
There are 2 new additional typeC ports in Tiger Lake and PORT-C is now a
combophy port. This results in 6 typeC ports and 3 combophy ports.
These 6 TC ports can be DP alternate mode, DP over thunderbolt, native
DP on legacy DP connector or native HDMI on legacy connector.
v2: Rebase on new modular FIA code (Lucas)
v3: Also add new port in port_identifier(), even though it can't
possibly be used there (requested by José)
v4: Add conversion port->tc_port in helper function after introction of
phy namespace (Lucas)
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190711173115.28296-13-lucas.demarchi@intel.com
Add a new pll array for Tiger Lake. The TC pll functions for type C will
be covered in later patches after its phy is implemented.
Cc: Madhav Chauhan <madhav.chauhan@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190711173115.28296-12-lucas.demarchi@intel.com
Add 2 new PLLs for additional TC ports. The names for the PLLs on TGL
changed, but most registers remained the same, like MGPLL5_ENABLE,
MGPLL6_ENABLE. So continue to use the name from ICL.
Cc: Madhav Chauhan <madhav.chauhan@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190711173115.28296-11-lucas.demarchi@intel.com
Add power well 5 to support 4th pipe and transcoder on TGL.
Cc: James Ausmus <james.ausmus@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190711173115.28296-10-lucas.demarchi@intel.com
The patch adds the new power wells introduced by TGL (GEN 12) and
maps these to existing/new power domains. The changes for GEN 12 wrt
to GEN 11 are the following:
- Transcoder#EDP removed from power well#1 (Transcoder#A used in
low-power mode instead)
- Transcoder#A is now backed by power well#1 instead of power well#3
- The DDI#B/C combo PHY ports are now backed by power well#1 instead of
power well#3
- New power well#5 added for pipe#D functionality (TODO)
- 2 additional TC ports (TC#5-6) backed by power well#3, 2 port
specific IO power wells (only for the non-TBT modes) and 4 port
specific AUX power wells (2-2 for TBT vs. non-TBT modes)
- Power well#2 backs now VDSC/joining for pipe#A instead of VDSC for
eDP and MIPI DSI (TODO)
On TGL Port DDI#C changed to be a combo PHY (native DP/HDMI) and
BSpec has renamed ports DDI#D-F to TC#4-6 respectively. Thus on ICL we
have the following naming for ports:
- Combo PHYs (native DP/HDMI):
DDI#A-B
- TBT/non-TBT (TC altmode, native DP/HDMI) PHYs:
DDI#C-F
Starting from GEN 12 we have the following naming for ports:
- Combo PHYs (native DP/HDMI):
DDI#A-C
- TBT/non-TBT (TC altmode, native DP/HDMI) PHYs:
DDI TC#1-6
To save some space in the power domain enum the power domain naming in
the driver reflects the above change, that is power domains TC#1-3 are
added as aliases for DDI#D-F and new power domains are reserved for
TC#4-6.
v2 (Lucas):
- Separate out the bits and definitions for TGL from the ICL ones.
Fix use of TRANSCODER_EDP_VDSC, that is now the correct define since
we don't define TRANSCODER_A_VDSC power domain to spare a one bit in
the bitmask (suggested by Ville)
v3 (Lucas):
- Fix missing squashes on v2
- Rebase on renamed TRANSCODER_EDP_VDSC
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190711173115.28296-9-lucas.demarchi@intel.com
On TGL the special EDP transcoder is gone and it should be handled by
transcoder A.
v2 (Lucas):
- Reuse POWER_DOMAIN_TRANSCODER_EDP_VDSC (suggested by Ville)
- Use crtc->dev since new_crtc_state->state may be NULL on atomic
commit (suggested by Maarten)
v3 (Lucas):
- Rename power domain so it's clear it can also be used for transcoder
A in TGL (requested by José and Manasi)
Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190711173115.28296-8-lucas.demarchi@intel.com
Tiger Lake is a Intel® Processor containing Intel® HD Graphics.
This is just an initial Tiger Lake definition. PCI IDs, generic support
and new features coming in following patches.
v2 (Lucas):
- Remove modular FIA - feature will be re-introduced in future
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190711173115.28296-3-lucas.demarchi@intel.com
With 4:2:0 output the LS clock can be half of what it is with 4:4:4.
Make that happen.
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190710125851.3275-1-ville.syrjala@linux.intel.com
Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Tested-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Currently the intel_update_plane and intel_disable_plane tracepoints record
the address of plane->name in the ring buffer, and then when reading the
ring buffer uses %s to get the name. The issue with this, is that those two
events can be minutes, hours or even days apart. It is very dangerous to
dereference a string pointer without knowing if it still exists or not.
The proper way to handle this is to use the __string() macro in the
tracepoint which will save the string into the ring buffer at the time of
recording. Then there's no worries if the original string still exists in
memory when the ring buffer is read.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
[vsyrjala: Rebase on top of drm-tip]
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190710171230.7471-1-ville.syrjala@linux.intel.com
Zero initialize val2 so that we don't pass stack garbage to
the pcode qgv read command. I suspect in this case pcode
just ignores the initial value in that registers, but better
safe than sorry.
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190710134937.25835-1-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
