for all Gru devices, rk3399 spi dma properties, some improvements for
the rk3399-sapphire board (fan, chosen, backlight), hs200 mode for the
emmc on the rock64 and declaring all cpu cores in the cooling maps
instead of just cpu0.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAlv2ni0QHGhlaWtvQHNu
dGVjaC5kZQAKCRDzpnnJnNEdgeaVB/4vKlFs9CKs+oj7Wi5+UoSbsBReHqAuENVm
6ShgnA15nCVaOzo3RT1ck8hHjKpAcTfX1siwmCK9OETwyxXI5vQCbKz3EIkoQYCQ
WIyyqlTs6Ars67ZSxJSPgitj8kguzEfJo7T+mOhhQK0nWS1jjJRmdtMcsYXqJbMg
OYj35cG4zRVFIQg87kQnVC3rkBu5Pb4LhY8J8+Ft2NUlRbUHBC08zgxe7oZLlTrt
AIquFnEdhjSz0KxeN66wtvEyMT1e36qTjW8/iu3YQOIaxFoIcxCtrXIfxplFId6o
f01Yu86wjfANQYIRzZLRV2GsLIlYpdiGk/aCQnSb6xgB4bcXiZQ9
=WIig
-----END PGP SIGNATURE-----
Merge tag 'v4.21-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt
New dts for Gru-Scarlet (tablet device), default backlight brightness
for all Gru devices, rk3399 spi dma properties, some improvements for
the rk3399-sapphire board (fan, chosen, backlight), hs200 mode for the
emmc on the rock64 and declaring all cpu cores in the cooling maps
instead of just cpu0.
* tag 'v4.21-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
arm64: dts: rockchip: Add all CPUs in cooling maps
arm64: dts: rockchip: add Gru Scarlet devicetrees
arm64: dts: rockchip: move backlight from rk3399 sapphire to excavator
arm64: dts: rockchip: Use default brightness table for rk3399-gru
arm64: dts: rockchip: add chosen node on rk3399-sapphire
arm64: dts: rockchip: enable HS200 for eMMC on rock64
arm64: dts: rockchip: add fan on rk3399-sapphire board
arm64: dts: rockchip: add rk3399 SPI DMAs
Signed-off-by: Olof Johansson <olof@lixom.net>
regulator name and referencing all cpus in the cooling maps instead
of only cpu0.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAlv2mkYQHGhlaWtvQHNu
dGVjaC5kZQAKCRDzpnnJnNEdgf2ZCACoJZ1G4trbzqhdH1DXlLac7hsk+Hu/1jTW
WrP6mXVyOJLdo3XRAoYEKI8WFx88pyXUDuXnxH4vO2SaoEDyIDYGuYxiiDZsrMiv
oX0uyx9JKpY3cSBiDsPkfaxdcyGmVP2x10gxJvcoF4mP3FlMh5Ovtoyq83djxm7B
/kw0NniMU9qKn8ilPAy+kiNADQkC3swupq0uLpt4wgvIPKkiGWEEaJjG30boc21q
qpFlB9PowM52ZIqttTjvzh/wnb0eB6sEcI9tuuUa4S8y0PHzRpiIco0pqUsuq6I4
UbAbqshORINRkJTZwhfw4HWmrKLF5s6vXGKFbx9M3TgVHKWGYHTw
=zDNA
-----END PGP SIGNATURE-----
Merge tag 'v4.21-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt
Powerdomain and QoS nodes for rk3066 and rk3188. A fix for a rock2
regulator name and referencing all cpus in the cooling maps instead
of only cpu0.
* tag 'v4.21-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
ARM: dts: rockchip: Add all CPUs in cooling maps
ARM: dts: rockchip: Fix rk3288-rock2 vcc_flash name
ARM: dts: rockchip: add rk3066/rk3188 power-domains
ARM: dts: rockchip: add qos nodes found on rk3066 and rk3188
dt-bindings: add power-domain header for RK3066 SoCs
dt-bindings: add power-domain header for RK3188 SoCs
Signed-off-by: Olof Johansson <olof@lixom.net>
Single patch to use updated coresight graph bindings thereby removing
loads of dtc warnings
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=8TMG
-----END PGP SIGNATURE-----
Merge tag 'vexpress-updates-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into next/dt
ARMv7 Vexpress updates for v4.20
Single patch to use updated coresight graph bindings thereby removing
loads of dtc warnings
* tag 'vexpress-updates-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
ARM: dts: vexpress/TC2: Update entries to match latest coresight bindings
Signed-off-by: Olof Johansson <olof@lixom.net>
Harmless mistake, but it's incorrect. The DT spec provides recommendations
for the node names:
"The name of a node should be somewhat generic, reflecting the function
of the device and not its precise programming model. If appropriate, the
name should be one of the following choices:
...
interrupt-controller"
Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
This commit adds QSPI flash support to the iwg23s board specific
device tree.
Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Add QSPI[01] support to the RZ/G1C SoC specific device tree.
Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
This patch enables cmt0 support on the iWave iwg23s sbc.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Add CMT[01] support to r8a77470 SoC DT.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
This patch adds USB DMAC nodes.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
This patch enables watchdog support on the iWave iwg23s sbc.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
This patch adds watchdog support to the r8a77470 SoC dtsi.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
[simon: moved node to preserve sort order]
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Update the R-Mobile A1 (r8a7740), Emma Mobile EV2 (emev2) and
SH-Mobile AG5 (sh72a0) DTSI to include product name.
Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
[simon: squashed similar patches]
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
The LVDS0 encoder on Koelsh and Porter, and the LVDS1 encoder on Lager,
are enabled in DT but have no device connected to their output. This
result in spurious messages being printed to the kernel log such as
rcar-du feb00000.display: no connector for encoder /soc/lvds@feb90000, skipping
Fix it by disabling the encoders.
Fixes: 15a1ff30d8 ("ARM: dts: r8a7790: Convert to new LVDS DT bindings")
Fixes: e5c3f4707f ("ARM: dts: r8a7791: Convert to new LVDS DT bindings")
Reported-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Add uSD card and eMMC support to the iwg23s single board
computer powered by the RZ/G1C SoC (a.k.a. r8a77470).
Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Biju Das <biju.das@bp.renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Althought interface SDHI1 found on the RZ/G1C SoC (a.k.a.
r8a77470) is compatible with the R-Car Gen3 ones, its OF
compatibility is restricted to the SoC specific compatible
string to avoid confusion, as from a more generic perspective
the RZ/G1C is sharing the most similarities with the R-Car
Gen2 family of SoCs, and there is a combination of R-Car
Gen2 compatible SDHI IPs and R-Car Gen3 compatible SDHI IP
on this specific chip.
This patch adds the SoC specific part of SDHI1 support, and
since SDHI1 comes with internal DMA, its DT node looks fairly
different from SDHI0 and SDHI2.
Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Biju Das <biju.das@bp.renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
RZ/G1C comes with two different types of IP for the SDHI
interfaces, SDHI0 and SDHI2 share the same IP type, and
such an IP is also compatible with the one found in R-Car
Gen2. SDHI1 IP on the other hand is compatible with R-Car
Gen3 with internal DMA.
This patch completes the SDHI support of the R-Car Gen2
compatible IPs, including fixing the max-frequency
definition of SDHI2, as it turns out there is a bug in
Section 1.3.9 of the RZ/G1C Hardware User's Manual (Rev.
1.00 Oct. 2017).
Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Biju Das <biju.das@bp.renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Add device tree nodes for the I2C[0123] controllers. Also, add
the aliases node.
Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
This provides a pinctrl driver for the Renesas R9A06G032 SoC
Based on a patch originally written by Michel Pollet at Renesas.
Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Each CPU can (and does) participate in cooling down the system but the
DT only captures a handful of them, normally CPU0, in the cooling maps.
Things work by chance currently as under normal circumstances its the
first CPU of each cluster which is used by the operating systems to
probe the cooling devices. But as soon as this CPU ordering changes and
any other CPU is used to bring up the cooling device, we will start
seeing failures.
Also the DT is rather incomplete when we list only one CPU in the
cooling maps, as the hardware doesn't have any such limitations.
Update cooling maps to include all devices affected by individual trip
points.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
This patch adds the thermal device node and the thermal-zone for
the R8A77990 SoC.
Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com>
Tested-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
rsnd driver supports SSIU now, let's use it.
Then, BUSIF DMA settings on rcar_sound,ssi (= rxu, txu) are
no longer needed.
To avoid git merge timing issue / git bisect issue,
this patch doesn't remove it so far, but will be removed in
the future.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
This patch adds I2C-DVFS device node for the R8A77990 SoC.
v2
* Drop aliases update as in upstream it is not required to configure the
BD9571 PMIC for DDR backup, nor is the use of i2c are aliases desired.
* Do not describe the device as compatible with "renesas,rcar-gen3-iic" or
"renesas,rmobile-iic" fallback compat strings. The absence of automatic
transmission registers leads us to declare the r8a77990 IIC controller as
incompatible.
v2.1
* Reduced register range to reflect documentation
Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
This patch adds CAN0,1 and CANFD device nodes for the r8a77990 SoC
and enables CANFD connected to CN10 on the E3 Ebisu board using the
R8A77990 SoC.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
This patch adds CAN{0,1} and CANFD controller nodes for the R8A77965 SoC.
Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Each CPU can (and does) participate in cooling down the system but the
DT only captures a handful of them, normally CPU0, in the cooling maps.
Things work by chance currently as under normal circumstances its the
first CPU of each cluster which is used by the operating systems to
probe the cooling devices. But as soon as this CPU ordering changes and
any other CPU is used to bring up the cooling device, we will start
seeing failures.
Also the DT is rather incomplete when we list only one CPU in the
cooling maps, as the hardware doesn't have any such limitations.
Update cooling maps to include all devices affected by individual trip
points.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Each CPU can (and does) participate in cooling down the system but the
DT only captures a handful of them, normally CPU0, in the cooling maps.
Things work by chance currently as under normal circumstances its the
first CPU of each cluster which is used by the operating systems to
probe the cooling devices. But as soon as this CPU ordering changes and
any other CPU is used to bring up the cooling device, we will start
seeing failures.
Also the DT is rather incomplete when we list only one CPU in the
cooling maps, as the hardware doesn't have any such limitations.
Update cooling maps to include all devices affected by individual trip
points.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
This patch adds PCI express channel 0 device node to the R8A77990 SoC
and enables PCIEC0 PCI express controller on the Ebisu board.
Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
There is no functional change from this, but it is confusing to find two
copies of vcc_sys and no vcc_flash when looking in
/sys/class/regulator/*/name.
Signed-off-by: John Keeping <john@metanate.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Set the capacity-dmips-mhz for R-Car Gen3 SoCs, that is based on
dhrystone. The average in 10 times of dhrystone result as follows:
r8a7795 SoC (A57x4 + A53x4)
CPU max-freq dhrystone
---------------------------------
A57 1500 MHz 11470943 lps/s
A53 1200 MHz 4798583 lps/s
r8a7796 SoC (A57x2 + A53x4)
CPU max-freq dhrystone
---------------------------------
A57 1500 MHz 11463526 lps/s
A53 1200 MHz 4793276 lps/s
Based on above, capacity-dmips-mhz values are calculated as follows:
r8a7795 SoC
A57 : 1024 / (11470943 / 1500) * (11470943 / 1500) = 1024
A53 : 1024 / (11470943 / 1500) * ( 4798583 / 1200) = 535
r8a7796 SoC
A57 : 1024 / (11463526 / 1500) * (11463526 / 1500) = 1024
A53 : 1024 / (11463526 / 1500) * ( 4793276 / 1200) = 535
However, since each CPUs have different max frequencies, the final
CPU capacities of A53 are scaled by this difference, the values are
as follows.
[r8a7795 SoC]
$ cat /sys/devices/system/cpu/cpu*/cpu_capacity
1024 <---- CPU capacity of A57
1024
1024
1024
428 <---- CPU capacity of A53
428
428
428
[r8a7796 SoC]
$ cat /sys/devices/system/cpu/cpu*/cpu_capacity
1024 <---- CPU capacity of A57
1024
428 <---- CPU capacity of A53
428
428
428
Signed-off-by: Gaku Inami <gaku.inami.xh@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
This patch adds the "cpu-map" into r8a7795/r8a7796 composed of
multi-cluster. This definition is used to parse the cpu topology.
Signed-off-by: Gaku Inami <gaku.inami.xh@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Now that include/dt-bindings/clock/r8a774a1-cpg-mssr.h is in Linus'
master branch we can replace clock related magic numbers with the
corresponding labels.
Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
[simon: corrected whitespace]
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Now that include/dt-bindings/power/r8a774a1-sysc.h is in Linus'
master branch we can replace power related magic numbers with
the corresponding labels.
Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Pull networking fixes from David Miller:
"One last pull request before heading to Vancouver for LPC, here we have:
1) Don't forget to free VSI contexts during ice driver unload, from
Victor Raj.
2) Don't forget napi delete calls during device remove in ice driver,
from Dave Ertman.
3) Don't request VLAN tag insertion of ibmvnic device when SKB
doesn't have VLAN tags at all.
4) IPV4 frag handling code has to accomodate the situation where two
threads try to insert the same fragment into the hash table at the
same time. From Eric Dumazet.
5) Relatedly, don't flow separate on protocol ports for fragmented
frames, also from Eric Dumazet.
6) Memory leaks in qed driver, from Denis Bolotin.
7) Correct valid MTU range in smsc95xx driver, from Stefan Wahren.
8) Validate cls_flower nested policies properly, from Jakub Kicinski.
9) Clearing of stats counters in mc88e6xxx driver doesn't retain
important bits in the G1_STATS_OP register causing the chip to
hang. Fix from Andrew Lunn"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (41 commits)
act_mirred: clear skb->tstamp on redirect
net: dsa: mv88e6xxx: Fix clearing of stats counters
tipc: fix link re-establish failure
net: sched: cls_flower: validate nested enc_opts_policy to avoid warning
net: mvneta: correct typo
flow_dissector: do not dissect l4 ports for fragments
net: qualcomm: rmnet: Fix incorrect assignment of real_dev
net: aquantia: allow rx checksum offload configuration
net: aquantia: invalid checksumm offload implementation
net: aquantia: fixed enable unicast on 32 macvlan
net: aquantia: fix potential IOMMU fault after driver unbind
net: aquantia: synchronized flow control between mac/phy
net: smsc95xx: Fix MTU range
net: stmmac: Fix RX packet size > 8191
qed: Fix potential memory corruption
qed: Fix SPQ entries not returned to pool in error flows
qed: Fix blocking/unlimited SPQ entries leak
qed: Fix memory/entry leak in qed_init_sp_request()
inet: frags: better deal with smp races
net: hns3: bugfix for not checking return value
...
- fix build errors in binrpm-pkg and bindeb-pkg targets
- fix false positive matches in merge_config.sh
- fix build version mismatch in deb-pkg target
- fix dtbs_install handling in (bin)deb-pkg target
- revert a commit that allows setlocalversion to write to source tree
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=Fj3R
-----END PGP SIGNATURE-----
Merge tag 'kbuild-fixes-v4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- fix build errors in binrpm-pkg and bindeb-pkg targets
- fix false positive matches in merge_config.sh
- fix build version mismatch in deb-pkg target
- fix dtbs_install handling in (bin)deb-pkg target
- revert a commit that allows setlocalversion to write to source tree
* tag 'kbuild-fixes-v4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
builddeb: Fix inclusion of dtbs in debian package
Revert "scripts/setlocalversion: git: Make -dirty check more robust"
kbuild: deb-pkg: fix too low build version number
kconfig: merge_config: avoid false positive matches from comment lines
kbuild: deb-pkg: fix bindeb-pkg breakage when O= is used
kbuild: rpm-pkg: fix binrpm-pkg breakage when O= is used
-----BEGIN PGP SIGNATURE-----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=K14u
-----END PGP SIGNATURE-----
Merge tag 'for-4.20-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"Several fixes to recent release (4.19, fixes tagged for stable) and
other fixes"
* tag 'for-4.20-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
Btrfs: fix missing delayed iputs on unmount
Btrfs: fix data corruption due to cloning of eof block
Btrfs: fix infinite loop on inode eviction after deduplication of eof block
Btrfs: fix deadlock on tree root leaf when finding free extent
btrfs: avoid link error with CONFIG_NO_AUTO_INLINE
btrfs: tree-checker: Fix misleading group system information
Btrfs: fix missing data checksums after a ranged fsync (msync)
btrfs: fix pinned underflow after transaction aborted
Btrfs: fix cur_offset in the error case for nocow
error return cleanup paths.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAlvoFrEACgkQ8vlZVpUN
gaMTSQf+Ogrvm7pfWtXf+RkmhhuyR26T+Hwxgl51m5bKetJBjEsh0qOaIfo7etwG
aLc1x/pWng2VTCHk4z0Ij9KS8YwLK3sQCBYZoJFyT/R09yGgAhLm+xP5j38WLqrX
h4GxVgekHSATkG95N/So7F7pQiz7gDowgbaYFW3PooXPoHJnCnTzcr7TGFAQBZAw
iR+8+KtH5E8IcC7Jj40nemk7Wib45DgaeGpP5P9Ct/Jw7hW+Mwhf56NYOWkLdHyy
4Kt7rm1Sbxam8k3nksNmIwx28bw+S0Ew1zZgkwgAcKcHaWdrv3TtGPkOA26AH+S3
UVeORM7xH+zXslIOyFK+7sXUZr5LiQ==
=BaBl
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 fixes from Ted Ts'o:
"A large number of ext4 bug fixes, mostly buffer and memory leaks on
error return cleanup paths"
* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: missing !bh check in ext4_xattr_inode_write()
ext4: fix buffer leak in __ext4_read_dirblock() on error path
ext4: fix buffer leak in ext4_expand_extra_isize_ea() on error path
ext4: fix buffer leak in ext4_xattr_move_to_block() on error path
ext4: release bs.bh before re-using in ext4_xattr_block_find()
ext4: fix buffer leak in ext4_xattr_get_block() on error path
ext4: fix possible leak of s_journal_flag_rwsem in error path
ext4: fix possible leak of sbi->s_group_desc_leak in error path
ext4: remove unneeded brelse call in ext4_xattr_inode_update_ref()
ext4: avoid possible double brelse() in add_new_gdb() on error path
ext4: avoid buffer leak in ext4_orphan_add() after prior errors
ext4: avoid buffer leak on shutdown in ext4_mark_iloc_dirty()
ext4: fix possible inode leak in the retry loop of ext4_resize_fs()
ext4: fix missing cleanup if ext4_alloc_flex_bg_array() fails while resizing
ext4: add missing brelse() update_backups()'s error path
ext4: add missing brelse() add_new_gdb_meta_bg()'s error path
ext4: add missing brelse() in set_flexbg_block_bitmap()'s error path
ext4: avoid potential extra brelse in setup_new_flex_group_blocks()
Pull x86 fixes from Thomas Gleixner:
"A set of x86 fixes:
- Cure the LDT remapping to user space on 5 level paging which ended
up in the KASLR space
- Remove LDT mapping before freeing the LDT pages
- Make NFIT MCE handling more robust
- Unbreak the VSMP build by removing the dependency on paravirt ops
- Support broken PIT emulation on Microsoft hyperV
- Don't trace vmware_sched_clock() to avoid tracer recursion
- Remove -pipe from KBUILD CFLAGS which breaks clang and is also
slower on GCC
- Trivial coding style and typo fixes"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/cpu/vmware: Do not trace vmware_sched_clock()
x86/vsmp: Remove dependency on pv_irq_ops
x86/ldt: Remove unused variable in map_ldt_struct()
x86/ldt: Unmap PTEs for the slot before freeing LDT pages
x86/mm: Move LDT remap out of KASLR region on 5-level paging
acpi/nfit, x86/mce: Validate a MCE's address before using it
acpi/nfit, x86/mce: Handle only uncorrectable machine checks
x86/build: Remove -pipe from KBUILD_CFLAGS
x86/hyper-v: Fix indentation in hv_do_fast_hypercall16()
Documentation/x86: Fix typo in zero-page.txt
x86/hyper-v: Enable PIT shutdown quirk
clockevents/drivers/i8253: Add support for PIT shutdown quirk
Pull perf fixes from Thomas Gleixner:
"A bunch of perf tooling fixes:
- Make the Intel PT SQL viewer more robust
- Make the Intel PT debug log more useful
- Support weak groups in perf record so it's behaving the same way as
perf stat
- Display the LBR stats in callchain entries properly in perf top
- Handle different PMu names with common prefix properlin in pert
stat
- Start syscall augmenting in perf trace. Preparation for
architecture independent eBPF instrumentation of syscalls.
- Fix build breakage in JVMTI perf lib
- Fix arm64 tools build failure wrt smp_load_{acquire,release}"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf tools: Do not zero sample_id_all for group members
perf tools: Fix undefined symbol scnprintf in libperf-jvmti.so
perf beauty: Use SRCARCH, ARCH=x86_64 must map to "x86" to find the headers
perf intel-pt: Add MTC and CYC timestamps to debug log
perf intel-pt: Add more event information to debug log
perf scripts python: exported-sql-viewer.py: Fix table find when table re-ordered
perf scripts python: exported-sql-viewer.py: Add help window
perf scripts python: exported-sql-viewer.py: Add Selected branches report
perf scripts python: exported-sql-viewer.py: Fall back to /usr/local/lib/libxed.so
perf top: Display the LBR stats in callchain entry
perf stat: Handle different PMU names with common prefix
perf record: Support weak groups
perf evlist: Move perf_evsel__reset_weak_group into evlist
perf augmented_syscalls: Start collecting pathnames in the BPF program
perf trace: Fix setting of augmented payload when using eBPF + raw_syscalls
perf trace: When augmenting raw_syscalls plug raw_syscalls:sys_exit too
perf examples bpf: Start augmenting raw_syscalls:sys_{start,exit}
tools headers barrier: Fix arm64 tools build failure wrt smp_load_{acquire,release}
Pull timer fix from Thomas Gleixner:
"Just the removal of a redundant call into the sched deadline overrun
check"
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
posix-cpu-timers: Remove useless call to check_dl_overrun()
Pull scheduler fixes from Thomas Gleixner:
"Two small scheduler fixes:
- Take hotplug lock in sched_init_smp(). Technically not really
required, but lockdep will complain other.
- Trivial comment fix in sched/fair"
* 'sched/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/fair: Fix a comment in task_numa_fault()
sched/core: Take the hotplug lock in sched_init_smp()
Pull locking build fix from Thomas Gleixner:
"A single fix for a build fail with CONFIG_PROFILE_ALL_BRANCHES=y in
the qspinlock code"
* 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/qspinlock: Fix compile error
Pull core fixes from Thomas Gleixner:
"A couple of fixlets for the core:
- Kernel doc function documentation fixes
- Missing prototypes for weak watchdog functions"
* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
resource/docs: Complete kernel-doc style function documentation
watchdog/core: Add missing prototypes for weak functions
resource/docs: Fix new kernel-doc warnings
If sch_fq is used at ingress, skbs that might have been
timestamped by net_timestamp_set() if a packet capture
is requesting timestamps could be delayed by arbitrary
amount of time, since sch_fq time base is MONOTONIC.
Fix this problem by moving code from sch_netem.c to act_mirred.c.
Fixes: fb420d5d91 ("tcp/fq: move back to CLOCK_MONOTONIC")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
