These #if 0 blocks have been in place for years. Assume
they are not used and remove them
Signed-off-by: Ben Evans <bevans@cray.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-8058
Reviewed-on: http://review.whamcloud.com/20416
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Frank Zago <fzago@cray.com>
Reviewed-by: James Simmons <uja.ornl@yahoo.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove the unused lmv.*.placement parameter along with supporting
functions and struct members.
Signed-off-by: John L. Hammond <john.hammond@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-7674
Reviewed-on: http://review.whamcloud.com/18019
Reviewed-by: Ben Evans <bevans@cray.com>
Reviewed-by: Frank Zago <fzago@cray.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove obsolete comments about the behavior of ll_unlink()
Signed-off-by: John L. Hammond <john.hammond@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-8003
Reviewed-on: http://review.whamcloud.com/19881
Reviewed-by: Andrew Perepechko <andrew.perepechko@seagate.com>
Reviewed-by: James Simmons <uja.ornl@yahoo.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Change the order of checks for inactive OSCs in lov_prep_statfs_set()
so that administratively disabled OSTs do not generate any output in
"lfs df" at all, to avoid needlessly cluttering the output.
Enable the lazystatfs mount option by default, so that "df" does not
hang when an OST is temporarily offline.
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-7759
Reviewed-on: http://review.whamcloud.com/19195
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch resolves IO vs eviction race.
After eviction failed export stayed at stale list,
a client had IO processing and reconnected during it.
A client sent brw rpc with last lock cookie and new connection.
The lock with failed export was found and assert was happened.
(ost_handler.c:1812:ost_prolong_lock_one())
ASSERTION( lock->l_export == opd->opd_exp ) failed:
1. Skip the lock at ldlm_handle2lock if lock export failed.
2. Validation of lock for IO was added at hpreq_check(). The lock
searching is based on granted interval tree. If server doesn`t
have a valid lock, it reply to client with ESTALE.
Signed-off-by: Alexander Boyko <alexander.boyko@seagate.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-7702
Seagate-bug-id: MRP-2787
Reviewed-on: http://review.whamcloud.com/18120
Reviewed-by: Fan Yong <fan.yong@intel.com>
Reviewed-by: Vitaly Fertman <vitaly.fertman@seagate.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
First of all, this is expensive procedure including a global
mutex and per-bucket spinlocks. also, all the threads observed
exceed will be calling lu_site_purge() and essentially serialized
on that. instead we can let other threads to skip the whole
procedure.
Signed-off-by: Alex Zhuravlev <alexey.zhuravlev@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-7896
Reviewed-on: http://review.whamcloud.com/19082
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Mike Pershin <mike.pershin@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ignore_layout can be set for operations that layout won't be changed,
typically page operations. Ignoring layout change in group lock
request will confuse layout change code at LOV layer and hit
assertion.
Signed-off-by: Henri Doreau <henri.doreau@cea.fr>
Signed-off-by: Jinshan Xiong <jinshan.xiong@intel.com>
Signed-off-by: Bobi Jam <bobijam.xu@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-2766
Reviewed-on: http://review.whamcloud.com/6828
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The function hai_dump_data_field will do a stack buffer
overrun when cat'ing /sys/fs/lustre/.../hsm/actions if an action has
some data in it.
hai_dump_data_field uses snprintf. But there is no check for
truncation, and the value returned by snprintf is used as-is. The
coordinator code calls hai_dump_data_field with 12 bytes in the
buffer. The 6th byte of data is printed incompletely to make room for
the terminating NUL. However snprintf still returns 2, so when
hai_dump_data_field writes the final NUL, it does it outside the
reserved buffer, in the 13th byte of the buffer. This stack buffer
overrun hangs my VM.
Fix by checking that there is enough room for the next 2 characters
plus the NUL terminator. Don't print half bytes. Change the format to
02X instead of .2X, which makes more sense.
Signed-off-by: frank zago <fzago@cray.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-8171
Reviewed-on: http://review.whamcloud.com/20338
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Jean-Baptiste Riaux <riaux.jb@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This issue is found by smatch; has been reported as-
Unchecked usage of potential ERR_PTR result in lmv_hsm_req_count
and lmv_hsm_req_build. Added ERR_PTR in both functions and also
return value check added.
Signed-off-by: Ulka Vaze <ulka.vaze@yahoo.in>
Signed-off-by: Aditya Pandit <panditadityashreesh@yahoo.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6523
Reviewed-on: http://review.whamcloud.com/14918
Reviewed-by: Dmitry Eremin <dmitry.eremin@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The algorithm for counting freeable objects in the lu_cache shrinker
does not scale with the number of cpus. The LU_SS_LRU_LEN counter
for each cpu is read and summed at shrink time while holding the
lu_sites_guard mutex. With a large number of cpus and low memory
conditions, processes bottleneck on the mutex.
This mod reduces the time spent counting by using the kernel's percpu
counter functions to maintain the length of a site's lru. The summing
occurs when a percpu value is incremented or decremented and a
threshold is exceeded. lu_cache_shrink_count() simply returns the
last such computed sum.
This mod also replaces the lu_sites_guard mutex with a rw semaphore.
The lock protects the lu_site list, which is modified when a file
system is mounted/umounted or when the lu_site is purged.
lu_cache_shrink_count simply reads data so it does not need to wait
for other readers. lu_cache_shrink_scan, which actually frees the
unused objects, is still serialized.
Signed-off-by: Ann Koehler <amk@cray.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-7997
Reviewed-on: http://review.whamcloud.com/19390
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Bobi Jam <bobijam@hotmail.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The target_obd debugfs file was not being generated correctly
in cases where nonconsecutive MDT indices were used when
generating a filesystem.
Signed-off-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-8100
Reviewed-on: http://review.whamcloud.com/20336
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Lai Siyao <lai.siyao@intel.com>
Reviewed-by: James Simmons <uja.ornl@yahoo.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Restore connect flags on failure of ptlrpc_connect_import()
to prevent an LBUG due to flags mismatch.
Signed-off-by: Jeremy Filizetti <jeremy.filizetti@gmail.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-7185
Reviewed-on: http://review.whamcloud.com/16950
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Sebastien Buisson <sebastien.buisson@bull.net>
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Read ahead currently doesn't handle 16MB RPC packets correctly
by assuming the packets are a default size instead of querying
the size. This work adjust the read ahead policy to issue
read ahead RPC by the underlying RPC size.
Signed-off-by: Jinshan Xiong <jinshan.xiong@intel.com>
Signed-off-by: Gu Zheng <gzheng@ddn.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-7990
Reviewed-on: http://review.whamcloud.com/19368
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Li Xi <lixi@ddn.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If a user process is waiting for MDS recovery during close, but the
process is interrupted, the file is still closed but it prints a
message on the console. Quiet the console message for -EINTR, since
this is expected behaviour.
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6627
Reviewed-on: http://review.whamcloud.com/14911
Reviewed-by: Frank Zago <fzago@cray.com>
Reviewed-by: Emoly Liu <emoly.liu@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch dropped support for remote entry statahead, because it
needs 2 async RPCs to fetch both LOOKUP lock from parent MDT and
UPDATE lock from client MDT, which is complicated. Plus not
supporting remote entry statahead won't cause any issue.
* pack child fid in statahead request.
* lmv_intent_getattr_async() will compare parent and child MDT,
if child is remote, return -ENOTSUPP.
Signed-off-by: Lai Siyao <lai.siyao@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6578
Reviewed-on: http://review.whamcloud.com/15767
Reviewed-by: Fan Yong <fan.yong@intel.com>
Reviewed-by: wangdi <di.wang@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In ll_setattr_raw(), it needs to know if a file is released
when the file is being truncated. It used to get this information
by accessing lov_stripe_md. This turns out not necessary. This
patch removes the access of lov_stripe_md and solves the problem
in lov_io_init_released().
Signed-off-by: Jinshan Xiong <jinshan.xiong@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-5823
Reviewed-on: http://review.whamcloud.com/13514
Reviewed-by: James Simmons <uja.ornl@yahoo.com>
Reviewed-by: Henri Doreau <henri.doreau@cea.fr>
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This is checkpatch fix for hal/bb_cfg.c file:
remove not necessary braces {}
Signed-off-by: Martin Karamihov <martinowar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Minor clean up, there is no need to assign result to zero, then
check if it is less than zero. Just return SUCCESS.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The retval status checks in the proceeding do loop return out
of function ms_read_attritbute_info if there is an error
condition, thus we never reach the end of the loop with
retval failed status. Therefore, the retval status check
at end of the do loop is redundant and can be removed.
Detected with CoverityScan, CID#143000 ("Logically dead code")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Having a local variable of 1024 bytes on 64-bit architectures is a bit
too much, and I ran into this warning while trying to see what functions
use the largest stack:
drivers/staging/fbtft/fbtft-sysfs.c: In function 'store_gamma_curve':
drivers/staging/fbtft/fbtft-sysfs.c:132:1: warning: the frame size of 1032 bytes is larger than 1024 bytes [-Wframe-larger-than=]
As there is no need for 64-bit gamma values (on 32-bit architectures,
we don't use those either), I'm changing the type from 'unsigned long'
to 'u32' here, which cuts the required space in half everywhere.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Putting 128 pointers on the stack is rather wasteful, in particular
on 64-bit architectures:
drivers/staging/rtl8192u/ieee80211/rtl819x_TSProc.c: In function 'RxPktPendingTimeout':
drivers/staging/rtl8192u/ieee80211/rtl819x_TSProc.c:92:1: warning: the frame size of 1072 bytes is larger than 1024 bytes [-Wframe-larger-than=]
The rtl8192e driver has the exact same function, except that stores the
array in its 'ieee' structure. Let's do it the same way here for consistency.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This one unfortunately slipped through my own build testing, my patch
caused a new build error:
bcm2835-camera.c:53:12: error: static declaration of 'bcm2835_v4l2_debug' follows non-static declaration
We want the symbol to be global as it is indeed used in more than one
file and declared 'extern' in a header.
Fixes: 757b9bd074 ("staging: bcm2835: mark all symbols as 'static'")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes the issue by aligning the * on each line in block comments.
Signed-off-by: Arushi <arushisinghal19971997@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We no longer send payloads back to the s-Par firmware, we can get rid of
the initialize and destroy functions since they weren't actually being
used just created and destroyed.
Signed-off-by: David Kershner <david.kershner@unisys.com>
Reviewed-by: David Binder <david.binder@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There were several unused data structures dealing with putfile that are no
longer being used. So get rid of them.
Signed-off-by: David Kershner <david.kershner@unisys.com>
Reviewed-by: Tim Sell <Timothy.Sell@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A stray+extraneous 'netif_napi_add()' that we were doing in
visornic_probe() was causing havoc when we got into visornic_remove(),
called during 'modprobe -r visornic'. The symptom was a processor busy-wait
loop on the modprobe process, which '/proc/<pid>/stack' would show looping
doing napi things.
Presumably the stray line got there as a result of some merging snafoo, and
has been deleted to fix the problem. With this patch 'modprobe -r visornic'
and a subsequent 'modprobe visornic' both complete successfully, and result
in an operational network.
Signed-off-by: Tim Sell <Timothy.Sell@unisys.com>
Signed-off-by: David Kershner <david.kershner@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Simplifies kobject usage in visorchipset.c by combining pairs of functions
that are better expressed combined.
Signed-off-by: David Binder <david.binder@unisys.com>
Signed-off-by: David Kershner <david.kershner@unisys.com>
Reported-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Checks the controlvm message's payload size before copying it into a
parser_context struct's name region.
Signed-off-by: David Binder <david.binder@unisys.com>
Signed-off-by: David Kershner <david.kershner@unisys.com>
Reported-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Removes struct safe_uis_queue, which is within struct visorchannel. The
struct is not used anywhere in the s-Par drivers.
Signed-off-by: David Binder <david.binder@unisys.com>
Signed-off-by: David Kershner <david.kershner@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove spaces around parenthesized expression to conform to the
kernel coding style. Issue found by checkpatch.pl script.
Signed-off-by: Miquel Raynal <raynal.miquel@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The incorrect or operator is being used resulting in cookies being
set to 1 (true) rather than the intended hex value. Fix this by
using | instead of ||.
Issue found with static analysis with cppcheck
Fixes: 0cec463e39 ("staging: bcm2835-audio: Simplify callback structure for write data")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
lustre uses a fake switch() statement as a compile-time assert, but unfortunately
each use of that causes a warning when building with clang:
drivers/staging/lustre/lnet/klnds/socklnd/socklnd.c:2907:2: warning: no case matching constant switch condition '42'
drivers/staging/lustre/lnet/klnds/socklnd/../../../include/linux/libcfs/libcfs_private.h:294:36: note: expanded from macro 'CLASSERT'
#define CLASSERT(cond) do {switch (42) {case (cond): case 0: break; } } while (0)
As Greg suggested, let's just kill off this macro completely instead of
fixing it. This replaces it with BUILD_BUG_ON(), which means we have
to negate all the conditions in the process.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
I got a link error in allyesconfig:
drivers/staging/media/platform/bcm2835/bcm2835-camera.o: In function `vidioc_enum_framesizes':
bcm2835-camera.c:(.text.vidioc_enum_framesizes+0x0): multiple definition of `vidioc_enum_framesizes'
drivers/media/platform/vivid/vivid-vid-cap.o:vivid-vid-cap.c:(.text.vidioc_enum_framesizes+0x0): first defined here
While both drivers are equally at fault for this problem, the bcm2835 one was
just added and is easier to fix, as it is only one file, and none of its symbols
need to be globally visible. This marks the three global symbols as static.
Fixes: 7b3ad5abf0 ("staging: Import the BCM2835 MMAL-based V4L2 camera driver.")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
gcc-7 warns about debug statements being left out here:
drivers/staging/bcm2835-audio/bcm2835-vchiq.c: In function 'bcm2835_audio_set_ctls':
drivers/staging/bcm2835-audio/bcm2835-vchiq.c:572:54: error: suggest braces around empty body in an 'else' statement [-Werror=empty-body]
It's better to use no_printk(), which has the added advantage of checking
the format strings.
Fixes: 23b028c871 ("staging: bcm2835-audio: initial staging submission")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The driver introduces a new instance of the missing-include-dirs warning that
is enabled at the "make W=1" level but has no other output:
cc1: error: /git/arm-soc/drivers/staging/vc04_services/interface/vcos/linuxkernel: No such file or directory [-Werror=missing-include-dirs]
In order to let us enable the warning by default in the future, we should
just remove the incorrect argument here.
Fixes: 23b028c871 ("staging: bcm2835-audio: initial staging submission")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The driver introduces a new instance of the missing-include-dirs warning that
is enabled at the "make W=1" level but has no other output:
cc1: error: drivers/staging/vc04_services/interface/vcos/linuxkernel: No such file or directory [-Werror=missing-include-dirs]
cc1: all warnings being treated as errors
scripts/Makefile.build:307: recipe for target 'drivers/staging/media/platform/bcm2835/bcm2835-camera.o' failed
In order to let us enable the warning by default in the future, we should
just remove the incorrect argument here.
Fixes: 97b35807cc ("staging: bcm2835-v4l2: Add a build system for the module.")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The function vchi_msg_queue was made static in vc04_services
and replaced with vchi_queue_kernel_message.
Change the call to vchi_msg_queue to vchi_queue_kernel_message
Signed-off-by: Michael Zoran <mzoran@crowfest.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The function vchi_msg_queue was made static in vc04_services
and replaced with vchi_queue_kernel_message.
Change the call to vchi_msg_queue to vchi_queue_kernel_message
Signed-off-by: Michael Zoran <mzoran@crowfest.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This also involves a merge of the ib-mid-iio-pwm-4.11 branch from mfd to
bring in support for the stm32 timer triggers needed for the buffered
features in the stm32 adc driver.
New device support:
* Amligic Meson SAR ADC
- new driver and bindings
* cros_ec barometer
- new driver
* max5481 digital potentiometers
- new driver for 5481, 5482, 5483 and 5484
* Renesas GyroADC - a very specific spi offload engine for ADCs
- new driver and bindings.
* srf08 ultrasonic ranger
- new driver, bindings and ABI docs,
New features
* Qualcomm PM8xxx ADC bindings.
- due to a trivial build issues the driver will be following shortly.
* stm32 ADC
- Triggered buffer mode
- Allow use of stm32 timer triggers
- Add trigger polarity control
- Optional DMA support with bindings update
* stx104
- add support for gpio names
- support set_multiple callback
* tmp007
- optional interrupt support
Cleanups
* ad7150
- alignment fix.
* ad7816
- octal rather than symbolic permissions.
* lsm6dsx
- allow selection of data ready pin via device tree bindings.
* ssp_sensors
- use devm_iio_device_register to handle unregister automatically.
* stx104
- use devm functions in probe allowing removal or the remove function.
- drop unneeded struct stx104_dev
* tmp007
- fix the name attribute to be a meaninful description of the part.
-----BEGIN PGP SIGNATURE-----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=smLx
-----END PGP SIGNATURE-----
Merge tag 'iio-for-4.11c' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next
Jonathan writes:
Third set of new device support, features and cleanups for IIO in the 4.11 cycle
This also involves a merge of the ib-mid-iio-pwm-4.11 branch from mfd to
bring in support for the stm32 timer triggers needed for the buffered
features in the stm32 adc driver.
New device support:
* Amligic Meson SAR ADC
- new driver and bindings
* cros_ec barometer
- new driver
* max5481 digital potentiometers
- new driver for 5481, 5482, 5483 and 5484
* Renesas GyroADC - a very specific spi offload engine for ADCs
- new driver and bindings.
* srf08 ultrasonic ranger
- new driver, bindings and ABI docs,
New features
* Qualcomm PM8xxx ADC bindings.
- due to a trivial build issues the driver will be following shortly.
* stm32 ADC
- Triggered buffer mode
- Allow use of stm32 timer triggers
- Add trigger polarity control
- Optional DMA support with bindings update
* stx104
- add support for gpio names
- support set_multiple callback
* tmp007
- optional interrupt support
Cleanups
* ad7150
- alignment fix.
* ad7816
- octal rather than symbolic permissions.
* lsm6dsx
- allow selection of data ready pin via device tree bindings.
* ssp_sensors
- use devm_iio_device_register to handle unregister automatically.
* stx104
- use devm functions in probe allowing removal or the remove function.
- drop unneeded struct stx104_dev
* tmp007
- fix the name attribute to be a meaninful description of the part.
The Apex Embedded Systems STX104 series provides a digital output
register where 4 lines may be set at a time. This patch add support for
the set_multiple callback function, thus allowing multiple digital
output lines to be set more efficiently in groups.
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: Hartmut Knaack <knaack.h@gmx.de>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net>
Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
This adds the device tree bindings for the Qualcomm PM8xxx
ADCs. This is based on the existing DT bindings for the
SPMI ADC so there are hopefully no controversial features.
Cc: devicetree@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-arm-msm@vger.kernel.org
Cc: Ivan T. Ivanov <iivanov.xz@gmail.com>
Cc: Andy Gross <andy.gross@linaro.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Cc: Rama Krishna Phani A <rphani@codeaurora.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
This patch sets the gpio_chip names option with an array of GPIO line
names that match the manual documentation for the Apex Embedded Systems
STX104. This should make it easier for users to identify which GPIO line
corresponds to a respective GPIO pin on the device.
Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
The vchi_msg_queue function which is used by other drivers
to queue a message is difficult to understand and overly
generic.
Make the function static and remove it from the exported
symbols.
Signed-off-by: Michael Zoran <mzoran@crowfest.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The vchi_msg_queue function which is used by other drivers
to queue a message is difficult to understand and overly
generic.
Add a new function which is a wrapper on top of vchi_msg_queue
that is specifically for queuing a message located in user
address space.
int
vchi_queue_user_message(VCHI_SERVICE_HANDLE_T handle,
void __user *data,
unsigned int size)
Signed-off-by: Michael Zoran <mzoran@crowfest.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The vchi_msg_queue function which is used by other drivers
to queue a message is difficult to understand and overly
generic.
Add a new function which is a wrapper on top of vchi_msg_queue
that is specifically for queuing a message located in kernel
address space.
int
vchi_queue_kernel_message(VCHI_SERVICE_HANDLE_T handle,
void *data,
unsigned int size)
Signed-off-by: Michael Zoran <mzoran@crowfest.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The device sends data to the audio devices by sending a message with
the data through VC04_SERVICES/VCHIQ. This message contains a
callback pointer that is always filled in with the same function.
This is prone to corruption issues.
Instead fill the callback fields with a fixed cookie value to perforam
some validation on the message response and call the handler function
directly instead of through the callback pointer.
Signed-off-by: Michael Zoran <mzoran@crowfest.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The bcm2835-audio driver has a legacy code path for initializing
devices without a device tree. Delete this code path and remove
the non device tree devices.
Signed-off-by: Michael Zoran <mzoran@crowfest.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
