Commit Graph

22 Commits

Author SHA1 Message Date
Maxime Ripard
133add5b5a
drm/sun4i: Add Allwinner A31 MIPI-DSI controller support
Most of the Allwinner SoCs since the A31 share the same MIPI-DSI
controller.

While that controller is mostly undocumented, the code is out there and has
been cleaned up in order to be integrated into DRM. However, there's still
some dark areas that are a bit unclear about how the block exactly
operates.

Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ad9e6224fced87c0889ddd2765d1942610061f72.1522835818.git-series.maxime.ripard@bootlin.com
2018-04-11 13:19:17 +02:00
Jernej Skrabec
4f86e81748
drm/sun4i: Add support for H3 HDMI PHY variant
While A83T HDMI PHY seems to be just customized Synopsys HDMI PHY, H3
HDMI PHY is completely custom PHY.

However, they still have many things in common like clock and reset
setup, setting sync polarity and more.

Add support for H3 HDMI PHY variant.

While documentation exists for this PHY variant, it doesn't go in great
details. Because of that, almost all settings are copied from BSP linux
4.4. Interestingly, those settings are slightly different to those found
in a older BSP with Linux 3.4. For now, no user visible difference was
found between them.

Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180301213442.16677-13-jernej.skrabec@siol.net
2018-03-02 08:45:49 +01:00
Jernej Skrabec
b7c7436a5f
drm/sun4i: Implement A83T HDMI driver
A83T has DW HDMI IP block with a custom PHY similar to Synopsys gen2
HDMI PHY.

Only video output was tested, while HW also supports audio and CEC.
Support for them will be added later.

Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180214200906.31509-11-jernej.skrabec@siol.net
2018-02-16 09:38:30 +01:00
Maxime Ripard
dd0421f475
drm/sun4i: Add a driver for the display frontend
The display frontend is an hardware block that can be used to implement
some more advanced features like hardware scaling or colorspace
conversions. It can also be used to implement the output format of the VPU.

Let's create a minimal driver for it that will only enable the hardware
scaling features.

Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/029cdc3478bf89d422f5e8d9e600baf5e48ce4db.1516613040.git-series.maxime.ripard@free-electrons.com
2018-01-22 15:15:38 +01:00
Maxime Ripard
a0c1214e47
drm/sun4i: Add LVDS support
The TCON supports the LVDS interface to output to a panel or a bridge.
Let's add support for it.

Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/7fbb85f33ee1d5009fde4f0d7d236e11ca58b114.1513854122.git-series.maxime.ripard@free-electrons.com
2018-01-04 20:37:17 +01:00
Jernej Skrabec
8830293905 drm/sun4i: Add DE2 CSC library
DE2 have many CSC units - channel input CSC, channel output CSC and
mixer output CSC and maybe more.

Fortunately, they have all same register layout, only base offsets
differs.

Add support only for channel output CSC for now.

Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171201060550.10392-24-jernej.skrabec@siol.net
2017-12-05 13:22:44 +01:00
Jernej Skrabec
b862a648de drm/sun4i: Add support for HW scaling to DE2
Scaling is currently supported only for RGB framebuffers

Coefficients and algorithm which coefficients to select are taken
from BSP driver.

Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171201060550.10392-22-jernej.skrabec@siol.net
2017-12-05 13:22:44 +01:00
Jernej Skrabec
7480ba4d75 drm/sun4i: Add support for DE2 VI planes
This commit adds basic support for VI planes. They are meant for video
overlay and because of that they support YUV formats too. However, using
YUV format is not straightforward, so only RGB formats are supported for
now.

Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171201060550.10392-20-jernej.skrabec@siol.net
2017-12-05 13:22:43 +01:00
Jernej Skrabec
5bb5f5dafa drm/sun4i: Reorganize UI layer code in DE2
Till now, DE2 driver supported only UI planes. Before we add support for
VI planes, lets split out UI layer specific code from common parts. This
commit does the following:
- renames sun8i_layer.c to sun8i_ui_layer.c
- moves UI channel specific code to sun8i_ui_layer.c
- moves common code from sun8i_layer.c to sun8i_mixer.c
- renames function and structure names so it is apparent where they
belong to

No functional change is made.

Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171201060550.10392-19-jernej.skrabec@siol.net
2017-12-05 13:22:43 +01:00
Linus Torvalds
e60e1ee606 main drm pull request for v4.15
-----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJaCm8RAAoJEAx081l5xIa+zX0QAJSm31kCG3vdw2CNiRx25L3q
 3hcsEOgAjVJ9FQVGKFWjzb8TK35tSqtNx5kWIj0VGaIfBE5Bdg5SLLgKKUYas8rY
 4LaphqICq2uxu2BNa2tpiar/sHhAnuozwQ4czpVWXzlaISnb9yYzRl7gMuyUVGkx
 +Gih5VUhLmQC0HsRTLJ3vaZQoUsLAl2gAjKcWa1bx57j2S+iKOPfsLaq7VYo+y1I
 Njc+iSGqMhJzRLXVkxL2lQKaslp7R38Bbh5K4Kvyjkm4Aq7zErOF6irpOXKMcrGl
 mwnr89vf1G9thjikrBaXpKnuvdbWYveoN/ORMlTdCfxkFnChHLnm3bd7NJ49RXDN
 Hv/Iq9YYjmZ9GTatxnx7lWtmXnZXC5he1yn1JAuz/yt7/0b/Wx+Mu/wEpBXYNFTd
 1AZdD586i+AmPo3yDkqH9nBu8JC0W0AnS9VZma4LVvZOP2UfJmj5Im1CLHItbGDN
 FnUCkwyD/lJUUk+WgT+w/GOMJgmFHDiFFl4tFtYVVjrUirpCFVguSKG9xuv6tT8P
 8iRsoP7RrcmDN9ojN2SEHwcpsAv3HnKkDv+9+GIbWnrGsSbCPq8Qm+JDSvf4h22I
 K5lwNpJrcpSKI+q10L7w2xliTBwb98sJkWGA/rssomrdBOWteGZAyqFRYAVgQ+mJ
 x/nJurIqQYh2KQN9+uLG
 =xVV2
 -----END PGP SIGNATURE-----

Merge tag 'drm-for-v4.15' of git://people.freedesktop.org/~airlied/linux

Pull drm updates from Dave Airlie:
 "This is the main drm pull request for v4.15.

  Core:
   - Atomic object lifetime fixes
   - Atomic iterator improvements
   - Sparse/smatch fixes
   - Legacy kms ioctls to be interruptible
   - EDID override improvements
   - fb/gem helper cleanups
   - Simple outreachy patches
   - Documentation improvements
   - Fix dma-buf rcu races
   - DRM mode object leasing for improving VR use cases.
   - vgaarb improvements for non-x86 platforms.

  New driver:
   - tve200: Faraday Technology TVE200 block.

     This "TV Encoder" encodes a ITU-T BT.656 stream and can be found in
     the StorLink SL3516 (later Cortina Systems CS3516) as well as the
     Grain Media GM8180.

  New bridges:
   - SiI9234 support

  New panels:
   - S6E63J0X03, OTM8009A, Seiko 43WVF1G, 7" rpi touch panel, Toshiba
     LT089AC19000, Innolux AT043TN24

  i915:
   - Remove Coffeelake from alpha support
   - Cannonlake workarounds
   - Infoframe refactoring for DisplayPort
   - VBT updates
   - DisplayPort vswing/emph/buffer translation refactoring
   - CCS fixes
   - Restore GPU clock boost on missed vblanks
   - Scatter list updates for userptr allocations
   - Gen9+ transition watermarks
   - Display IPC (Isochronous Priority Control)
   - Private PAT management
   - GVT: improved error handling and pci config sanitizing
   - Execlist refactoring
   - Transparent Huge Page support
   - User defined priorities support
   - HuC/GuC firmware refactoring
   - DP MST fixes
   - eDP power sequencing fixes
   - Use RCU instead of stop_machine
   - PSR state tracking support
   - Eviction fixes
   - BDW DP aux channel timeout fixes
   - LSPCON fixes
   - Cannonlake PLL fixes

  amdgpu:
   - Per VM BO support
   - Powerplay cleanups
   - CI powerplay support
   - PASID mgr for kfd
   - SR-IOV fixes
   - initial GPU reset for vega10
   - Prime mmap support
   - TTM updates
   - Clock query interface for Raven
   - Fence to handle ioctl
   - UVD encode ring support on Polaris
   - Transparent huge page DMA support
   - Compute LRU pipe tweaks
   - BO flag to allow buffers to opt out of implicit sync
   - CTX priority setting API
   - VRAM lost infrastructure plumbing

  qxl:
   - fix flicker since atomic rework

  amdkfd:
   - Further improvements from internal AMD tree
   - Usermode events
   - Drop radeon support

  nouveau:
   - Pascal temperature sensor support
   - Improved BAR2 handling
   - MMU rework to support Pascal MMU

  exynos:
   - Improved HDMI/mixer support
   - HDMI audio interface support

  tegra:
   - Prep work for tegra186
   - Cleanup/fixes

  msm:
   - Preemption support for a5xx
   - Display fixes for 8x96 (snapdragon 820)
   - Async cursor plane fixes
   - FW loading rework
   - GPU debugging improvements

  vc4:
   - Prep for DSI panels
   - fix T-format tiling scanout
   - New madvise ioctl

  Rockchip:
   - LVDS support

  omapdrm:
   - omap4 HDMI CEC support

  etnaviv:
   - GPU performance counters groundwork

  sun4i:
   - refactor driver load + TCON backend
   - HDMI improvements
   - A31 support
   - Misc fixes

  udl:
   - Probe/EDID read fixes.

  tilcdc:
   - Misc fixes.

  pl111:
   - Support more variants

  adv7511:
   - Improve EDID handling.
   - HDMI CEC support

  sii8620:
   - Add remote control support"

* tag 'drm-for-v4.15' of git://people.freedesktop.org/~airlied/linux: (1480 commits)
  drm/rockchip: analogix_dp: Use mutex rather than spinlock
  drm/mode_object: fix documentation for object lookups.
  drm/i915: Reorder context-close to avoid calling i915_vma_close() under RCU
  drm/i915: Move init_clock_gating() back to where it was
  drm/i915: Prune the reservation shared fence array
  drm/i915: Idle the GPU before shinking everything
  drm/i915: Lock llist_del_first() vs llist_del_all()
  drm/i915: Calculate ironlake intermediate watermarks correctly, v2.
  drm/i915: Disable lazy PPGTT page table optimization for vGPU
  drm/i915/execlists: Remove the priority "optimisation"
  drm/i915: Filter out spurious execlists context-switch interrupts
  drm/amdgpu: use irq-safe lock for kiq->ring_lock
  drm/amdgpu: bypass lru touch for KIQ ring submission
  drm/amdgpu: Potential uninitialized variable in amdgpu_vm_update_directories()
  drm/amdgpu: potential uninitialized variable in amdgpu_vce_ring_parse_cs()
  drm/amd/powerplay: initialize a variable before using it
  drm/amd/powerplay: suppress KASAN out of bounds warning in vega10_populate_all_memory_levels
  drm/amd/amdgpu: fix evicted VRAM bo adjudgement condition
  drm/vblank: Tune drm_crtc_accurate_vblank_count() WARN down to a debug
  drm/rockchip: add CONFIG_OF dependency for lvds
  ...
2017-11-15 20:42:10 -08:00
Greg Kroah-Hartman
b24413180f License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02 11:10:55 +01:00
Maxime Ripard
79c6109243 drm/sun4i: Realign Makefile padding and reorder it
Some options were not padded as they should, and the order in the Makefile
was chaotic. Fix that.

Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/9410b284ec97453fa692537dffaaa4fb4833347c.1508231063.git-series.maxime.ripard@free-electrons.com
2017-10-17 19:49:11 +02:00
Jonathan Liu
f0a3dd33ba drm/sun4i: hdmi: Implement I2C adapter for A10s DDC bus
The documentation for drm_do_get_edid in drivers/gpu/drm/drm_edid.c states:
"As in the general case the DDC bus is accessible by the kernel at the I2C
level, drivers must make all reasonable efforts to expose it as an I2C
adapter and use drm_get_edid() instead of abusing this function."

Exposing the DDC bus as an I2C adapter is more beneficial as it can be used
for purposes other than reading the EDID such as modifying the EDID or
using the HDMI DDC pins as an I2C bus through the I2C dev interface from
userspace (e.g. i2c-tools).

Implement this for A10s.

Signed-off-by: Jonathan Liu <net147@gmail.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-07-17 08:21:39 +02:00
Maxime Ripard
9c5681011a drm/sun4i: Add HDMI support
The earlier Allwinner SoCs (A10, A10s, A20, A31) have an embedded HDMI
controller.

That HDMI controller is able to do audio and CEC, but those have been left
out for now.

Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-06-01 09:50:01 +02:00
Icenowy Zheng
9d75b8c0b9 drm/sun4i: add support for Allwinner DE2 mixers
Allwinner have a new "Display Engine 2.0" in their new SoCs, which comes
with mixers to do graphic processing and feed data to TCON, like the old
backends and frontends.

Add support for the mixer on Allwinner V3s SoC; it's the simplest one.

Currently a lot of functions are still missing -- more investigations
are needed to gain enough information for them.

Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-06-01 09:49:54 +02:00
Icenowy Zheng
a43a42ad9c drm/sun4i: add a Kconfig option for sun4i-backend
As sun4i-backend is now a dedicated module, add an Kconfig option for
it to make it optional, since some build may only use other engines.

Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-06-01 09:49:54 +02:00
Icenowy Zheng
8796933843 drm/sun4i: abstract a engine type
As we are going to add support for the Allwinner DE2 engine in sun4i-drm
driver, we will finally have two types of display engines -- the DE1
backend and the DE2 mixer. They both do some display blending and feed
graphics data to TCON, and is part of the "Display Engine" called by
Allwinner, so I choose to call them both "engine" here.

Abstract the engine type to a new struct with an ops struct, which contains
functions that should be called outside the engine-specified code (in
TCON, CRTC or TV Encoder code).

In order to preserve bisectability, we also switch the backend and layer
code in its own module.

Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-06-01 09:47:23 +02:00
Chen-Yu Tsai
46cce6dac3 drm/sun4i: Initialize crtc from tcon bind function
The tcon provides part of the functionality of the crtc, and also
provides the device node for the output port of the crtc. To be able
to use drm_of_find_possible_crtcs(), all crtc must be initialized before
any downstream encoders. The other part of the crtc is the display
backend.

The Rockchip DRM driver does this by first binding all vops, which is
their crtc, and this step also creates the crtc objects. Then all
remaining hardware components are bound. With the Allwinner display
pipeline, we have multiple components comprising the crtc, and varying
depths of the display pipeline. Since components are added with a depth
first search of the of_graph, we can initialize the crtc object within
the tcon bind function. Since the backend precedes the tcon, and the
backends cannot be muxed or switched around, we can be sure that the
associated backend is already initialized.

This patch also moves the crtc pointer from the main drm_device data to
the tcon device data. Besides the crtc callbacks, the crtc structure is
only used within the tcon driver to signal vblank events from its
interrupt handler.

As the crtc and layer bits are now called from the tcon bits, we must
move them from the sun4i-drm module to the sun4i-tcon module to avoid
circular dependencies between the two modules. This is because sun4i-drm
also calls into sun4i-tcon.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-03-07 22:18:23 +01:00
Maxime Ripard
cd8fff504d drm/sun4i: Add a DRC driver
The A33 pipeline also has a component called DRC. Even though its exact
features and programming model is not known (or documented), it needs to
be clocked for the pipeline to carry the video signal all the way.

Add a minimal driver for it that just claim the needed resources for the
pipeline to operate properly.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Peter Korsgaard <peter@korsgaard.com>
2016-09-08 09:31:13 +02:00
Maxime Ripard
03c4c71d25 drm: sun4i: Add composite output
Some Allwinner SoCs have an IP called the TV encoder that is used to output
composite and VGA signals. In such a case, we need to use the second TCON
channel.

Add support for that TV encoder.

Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2016-04-28 10:30:05 +02:00
Maxime Ripard
29e57fab97 drm: sun4i: Add RGB output
One of the A10 display pipeline possible output is an RGB interface to
drive LCD panels directly. This is done through the first channel of the
TCON that will output our video signals directly.

Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2016-04-28 10:30:05 +02:00
Maxime Ripard
9026e0d122 drm: Add Allwinner A10 Display Engine support
The Allwinner A10 and subsequent SoCs share the same display pipeline, with
variations in the number of controllers (1 or 2), or the presence or not of
some output (HDMI, TV, VGA) or not.

Add a driver with a limited set of features for now, and we will hopefully
support all of them eventually

Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2016-04-28 10:30:05 +02:00