Add a command line option to dirty_log_perf_test to run vCPUs for the
entire duration of disabling dirty logging. By default, the test stops
running runs vCPUs before disabling dirty logging, which is faster but
less interesting as it doesn't stress KVM's handling of contention
between page faults and the zapping of collapsible SPTEs. Enabling the
flag also lets the user verify that KVM is indeed rebuilding zapped SPTEs
as huge pages by checking KVM's pages_{1g,2m,4k} stats. Without vCPUs to
fault in the zapped SPTEs, the stats will show that KVM is zapping pages,
but they never show whether or not KVM actually allows huge pages to be
recreated.
Note! Enabling the flag can _significantly_ increase runtime, especially
if the thread that's disabling dirty logging doesn't have a dedicated
pCPU, e.g. if all pCPUs are used to run vCPUs.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220715232107.3775620-5-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When zapping collapsible SPTEs in the TDP MMU, don't bottom out on a leaf
SPTE now that KVM doesn't require a PFN to compute the host mapping level,
i.e. now that there's no need to first find a leaf SPTE and then step
back up.
Drop the now unused tdp_iter_step_up(), as it is not the safest of
helpers (using any of the low level iterators requires some understanding
of the various side effects).
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220715232107.3775620-4-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a comment to document how host_pfn_mapping_level() can be used safely,
as the line between safe and dangerous is quite thin. E.g. if KVM were
to ever support in-place promotion to create huge pages, consuming the
level is safe if the caller holds mmu_lock and checks that there's an
existing _leaf_ SPTE, but unsafe if the caller only checks that there's a
non-leaf SPTE.
Opportunistically tweak the existing comments to explicitly document why
KVM needs to use READ_ONCE().
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220715232107.3775620-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Drop the requirement that a pfn be backed by a refcounted, compound or
or ZONE_DEVICE, struct page, and instead rely solely on the host page
tables to identify huge pages. The PageCompound() check is a remnant of
an old implementation that identified (well, attempt to identify) huge
pages without walking the host page tables. The ZONE_DEVICE check was
added as an exception to the PageCompound() requirement. In other words,
neither check is actually a hard requirement, if the primary has a pfn
backed with a huge page, then KVM can back the pfn with a huge page
regardless of the backing store.
Dropping the @pfn parameter will also allow KVM to query the max host
mapping level without having to first get the pfn, which is advantageous
for use outside of the page fault path where KVM wants to take action if
and only if a page can be mapped huge, i.e. avoids the pfn lookup for
gfns that can't be backed with a huge page.
Cc: Mingwei Zhang <mizhang@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Mingwei Zhang <mizhang@google.com>
Message-Id: <20220715232107.3775620-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Restrict the mapping level for SPTEs based on the guest MTRRs if and only
if KVM may actually use the guest MTRRs to compute the "real" memtype.
For all forms of paging, guest MTRRs are purely virtual in the sense that
they are completely ignored by hardware, i.e. they affect the memtype
only if software manually consumes them. The only scenario where KVM
consumes the guest MTRRs is when shadow_memtype_mask is non-zero and the
guest has non-coherent DMA, in all other cases KVM simply leaves the PAT
field in SPTEs as '0' to encode WB memtype.
Note, KVM may still ultimately ignore guest MTRRs, e.g. if the backing
pfn is host MMIO, but false positives are ok as they only cause a slight
performance blip (unless the guest is doing weird things with its MTRRs,
which is extremely unlikely).
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20220715230016.3762909-5-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add shadow_memtype_mask to capture that EPT needs a non-zero memtype mask
instead of relying on TDP being enabled, as NPT doesn't need a non-zero
mask. This is a glorified nop as kvm_x86_ops.get_mt_mask() returns zero
for NPT anyways.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20220715230016.3762909-4-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Return directly if kvm_arch_init() detects an error before doing any real
work, jumping through a label obfuscates what's happening and carries the
unnecessary risk of leaving 'r' uninitialized.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20220715230016.3762909-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reject KVM if entry '0' in the host's IA32_PAT MSR is not programmed to
writeback (WB) memtype. KVM subtly relies on IA32_PAT entry '0' to be
programmed to WB by leaving the PAT bits in shadow paging and NPT SPTEs
as '0'. If something other than WB is in PAT[0], at _best_ guests will
suffer very poor performance, and at worst KVM will crash the system by
breaking cache-coherency expecations (e.g. using WC for guest memory).
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20220715230016.3762909-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The index for svm_direct_access_msrs was incorrectly initialized with
the APIC MMIO register macros. Fix by introducing a macro for calculating
x2APIC MSRs.
Fixes: 5c127c8547 ("KVM: SVM: Adding support for configuring x2APIC MSRs interception")
Cc: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Message-Id: <20220718083833.222117-1-suravee.suthikulpanit@amd.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Remove the underscores from __pte_list_remove(), the function formerly
known as pte_list_remove() is now named kvm_zap_one_rmap_spte() to show
that it zaps rmaps/PTEs, i.e. doesn't just remove an entry from a list.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220715224226.3749507-8-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rename pte_list_remove() and pte_list_destroy() to kvm_zap_one_rmap_spte()
and kvm_zap_all_rmap_sptes() respectively to document that (a) they zap
SPTEs and (b) to better document how they differ (remove vs. destroy does
not exactly scream "one vs. all").
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220715224226.3749507-7-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rename kvm_unmap_rmap() and kvm_zap_rmap() to kvm_zap_rmap() and
__kvm_zap_rmap() respectively to show that what was the "unmap" helper is
just a wrapper for the "zap" helper, i.e. that they do the exact same
thing, one just exists to deal with its caller passing in more params.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220715224226.3749507-6-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rename __kvm_zap_rmaps() to kvm_rmap_zap_gfn_range() to avoid future
confusion with a soon-to-be-introduced __kvm_zap_rmap(). Using a plural
"rmaps" is somewhat ambiguous without additional context, as it's not
obvious whether it's referring to multiple rmap lists, versus multiple
rmap entries within a single list.
Use kvm_rmap_zap_gfn_range() to align with the pattern established by
kvm_rmap_zap_collapsible_sptes(), without losing the information that it
zaps only rmap-based MMUs, i.e. don't rename it to __kvm_zap_gfn_range().
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220715224226.3749507-5-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Drop the trailing "p" from rmap helpers, i.e. rename functions to simply
be kvm_<action>_rmap(). Declaring that a function takes a pointer is
completely unnecessary and goes against kernel style.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220715224226.3749507-4-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use pte_list_destroy() directly when recycling rmaps instead of bouncing
through kvm_unmap_rmapp() and kvm_zap_rmapp(). Calling kvm_unmap_rmapp()
is unnecessary and odd as it requires passing dummy parameters; passing
NULL for @slot when __rmap_add() already has a valid slot is especially
weird and confusing.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220715224226.3749507-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Return a u64, not an int, from mmu_spte_clear_track_bits(). The return
value is the old SPTE value, which is very much a 64-bit value. The sole
caller that consumes the return value, drop_spte(), already uses a u64.
The only reason that truncating the SPTE value is not problematic is
because drop_spte() only queries the shadow-present bit, which is in the
lower 32 bits.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220715224226.3749507-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
enter_svm_guest_mode() first calls nested_vmcb02_prepare_control() to copy
control fields from VMCB12 to the current VMCB, then
nested_vmcb02_prepare_save() to perform a similar copy of the save area.
This means that nested_vmcb02_prepare_control() still runs with the
previous save area values in the current VMCB so it shouldn't take the L2
guest CS.Base from this area.
Explicitly pull CS.Base from the actual VMCB12 instead in
enter_svm_guest_mode().
Granted, having a non-zero CS.Base is a very rare thing (and even
impossible in 64-bit mode), having it change between nested VMRUNs is
probably even rarer, but if it happens it would create a really subtle bug
so it's better to fix it upfront.
Fixes: 6ef88d6e36 ("KVM: SVM: Re-inject INT3/INTO instead of retrying the instruction")
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Message-Id: <4caa0f67589ae3c22c311ee0e6139496902f2edc.1658159083.git.maciej.szmigiero@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* First part of deferred teardown
* CPU Topology
* interpretive execution for PCI instructions
* PV attestation
* Minor fixes
-----BEGIN PGP SIGNATURE-----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=IB9Y
-----END PGP SIGNATURE-----
Merge tag 'kvm-s390-next-5.20-1' of https://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD
KVM: s390x: Fixes and features for 5.20
* First part of deferred teardown
* CPU Topology
* interpretive execution for PCI instructions
* PV attestation
* Minor fixes
During a subsystem reset the Topology-Change-Report is cleared.
Let's give userland the possibility to clear the MTCR in the case
of a subsystem reset.
To migrate the MTCR, we give userland the possibility to
query the MTCR state.
We indicate KVM support for the CPU topology facility with a new
KVM capability: KVM_CAP_S390_CPU_TOPOLOGY.
Signed-off-by: Pierre Morel <pmorel@linux.ibm.com>
Reviewed-by: Janis Schoetterl-Glausch <scgl@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Message-Id: <20220714194334.127812-1-pmorel@linux.ibm.com>
Link: https://lore.kernel.org/all/20220714194334.127812-1-pmorel@linux.ibm.com/
[frankja@linux.ibm.com: Simple conflict resolution in Documentation/virt/kvm/api.rst]
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
We report a topology change to the guest for any CPU hotplug.
The reporting to the guest is done using the Multiprocessor
Topology-Change-Report (MTCR) bit of the utility entry in the guest's
SCA which will be cleared during the interpretation of PTF.
On every vCPU creation we set the MCTR bit to let the guest know the
next time it uses the PTF with command 2 instruction that the
topology changed and that it should use the STSI(15.1.x) instruction
to get the topology details.
STSI(15.1.x) gives information on the CPU configuration topology.
Let's accept the interception of STSI with the function code 15 and
let the userland part of the hypervisor handle it when userland
supports the CPU Topology facility.
Signed-off-by: Pierre Morel <pmorel@linux.ibm.com>
Reviewed-by: Nico Boehr <nrb@linux.ibm.com>
Reviewed-by: Janis Schoetterl-Glausch <scgl@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Link: https://lore.kernel.org/r/20220714101824.101601-2-pmorel@linux.ibm.com
Message-Id: <20220714101824.101601-2-pmorel@linux.ibm.com>
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
We can check if SIIF is enabled by testing the sclp_info struct
instead of testing the sie control block eca variable as that
facility is always enabled if available.
Also let's cleanup all the ipte related struct member accesses
which currently happen by referencing the KVM struct via the
VCPU struct.
Making the KVM struct the parameter to the ipte_* functions
removes one level of indirection which makes the code more readable.
Signed-off-by: Pierre Morel <pmorel@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Nico Boehr <nrb@linux.ibm.com>
Link: https://lore.kernel.org/all/20220711084148.25017-2-pmorel@linux.ibm.com/
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
When the SIGP interpretation facility is present and a VCPU sends an
ecall to another VCPU in enabled wait, the sending VCPU receives a 56
intercept (partial execution), so KVM can wake up the receiving CPU.
Note that the SIGP interpretation facility will take care of the
interrupt delivery and KVM's only job is to wake the receiving VCPU.
For PV, the sending VCPU will receive a 108 intercept (pv notify) and
should continue like in the non-PV case, i.e. wake the receiving VCPU.
For PV and non-PV guests the interrupt delivery will occur through the
SIGP interpretation facility on SIE entry when SIE finds the X bit in
the status field set.
However, in handle_pv_notification(), there was no special handling for
SIGP, which leads to interrupt injection being requested by KVM for the
next SIE entry. This results in the interrupt being delivered twice:
once by the SIGP interpretation facility and once by KVM through the
IICTL.
Add the necessary special handling in handle_pv_notification(), similar
to handle_partial_execution(), which simply wakes the receiving VCPU and
leave interrupt delivery to the SIGP interpretation facility.
In contrast to external calls, emergency calls are not interpreted but
also cause a 108 intercept, which is why we still need to call
handle_instruction() for SIGP orders other than ecall.
Since kvm_s390_handle_sigp_pei() is now called for all SIGP orders which
cause a 108 intercept - even if they are actually handled by
handle_instruction() - move the tracepoint in kvm_s390_handle_sigp_pei()
to avoid possibly confusing trace messages.
Signed-off-by: Nico Boehr <nrb@linux.ibm.com>
Cc: <stable@vger.kernel.org> # 5.7
Fixes: da24a0cc58 ("KVM: s390: protvirt: Instruction emulation")
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Link: https://lore.kernel.org/r/20220718130434.73302-1-nrb@linux.ibm.com
Message-Id: <20220718130434.73302-1-nrb@linux.ibm.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Move the Destroy Secure Configuration UVC before the loop to destroy
the memory. If the protected VM has memory, it will be cleaned up and
made accessible by the Destroy Secure Configuration UVC. The struct
page for the relevant pages will still have the protected bit set, so
the loop is still needed to clean that up.
Switching the order of those two operations does not change the
outcome, but it is significantly faster.
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Nico Boehr <nrb@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Link: https://lore.kernel.org/r/20220628135619.32410-13-imbrenda@linux.ibm.com
Message-Id: <20220628135619.32410-13-imbrenda@linux.ibm.com>
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Refactor kvm_s390_pv_deinit_vm to improve readability and simplify the
improvements that are coming in subsequent patches.
No functional change intended.
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Link: https://lore.kernel.org/r/20220628135619.32410-12-imbrenda@linux.ibm.com
Message-Id: <20220628135619.32410-12-imbrenda@linux.ibm.com>
[frankja@linux.ibm.com: Dropped commit message line regarding review]
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
When ptep_get_and_clear_full is called for a mm teardown, we will now
attempt to destroy the secure pages. This will be faster than export.
In case it was not a teardown, or if for some reason the destroy page
UVC failed, we try with an export page, like before.
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Acked-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Nico Boehr <nrb@linux.ibm.com>
Link: https://lore.kernel.org/r/20220628135619.32410-11-imbrenda@linux.ibm.com
Message-Id: <20220628135619.32410-11-imbrenda@linux.ibm.com>
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Add an mmu_notifier for protected VMs. The callback function is
triggered when the mm is torn down, and will attempt to convert all
protected vCPUs to non-protected. This allows the mm teardown to use
the destroy page UVC instead of export.
Also make KVM select CONFIG_MMU_NOTIFIER, needed to use mmu_notifiers.
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Acked-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Nico Boehr <nrb@linux.ibm.com>
Link: https://lore.kernel.org/r/20220628135619.32410-10-imbrenda@linux.ibm.com
Message-Id: <20220628135619.32410-10-imbrenda@linux.ibm.com>
[frankja@linux.ibm.com: Conflict resolution for mmu_notifier.h include
and struct kvm_s390_pv]
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
When applying the hotplug hack to match x2APIC IDs for vCPUs in xAPIC
mode, check the target APID ID for being unaddressable in xAPIC mode
instead of checking the vCPU's x2APIC ID, and in that case proceed as
if apic_x2apic_mode(vcpu) were true.
Functionally, it does not matter whether you compare kvm_x2apic_id(apic)
or mda with 0xff, since the two values are then checked for equality.
But in isolation, checking the x2APIC ID takes an unnecessary dependency
on the x2APIC ID being read-only (which isn't strictly true on AMD CPUs,
and is difficult to document as well); it also requires KVM to fallthrough
and check the xAPIC ID as well to deal with a writable xAPIC ID, whereas
the xAPIC ID _can't_ match a target ID greater than 0xff.
Opportunistically reword the comment to call out the various subtleties,
and to fix a typo reported by Zhang Jiaming.
No functional change intended.
Cc: Zhang Jiaming <jiaming@nfschina.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Restrict get_mt_mask() to a u8 and reintroduce using a RET0 static_call
for the SVM implementation. EPT stores the memtype information in the
lower 8 bits (bits 6:3 to be precise), and even returns a shifted u8
without an explicit cast to a larger type; there's no need to return a
full u64.
Note, RET0 doesn't play nice with a u64 return on 32-bit kernels, see
commit bf07be36cd ("KVM: x86: do not use KVM_X86_OP_OPTIONAL_RET0 for
get_mt_mask").
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220714153707.3239119-1-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a second CPUID helper, kvm_find_cpuid_entry_index(), to handle KVM
queries for CPUID leaves whose index _may_ be significant, and drop the
index param from the existing kvm_find_cpuid_entry(). Add a WARN in the
inner helper, cpuid_entry2_find(), to detect attempts to retrieve a CPUID
entry whose index is significant without explicitly providing an index.
Using an explicit magic number and letting callers omit the index avoids
confusion by eliminating the myriad cases where KVM specifies '0' as a
dummy value.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Recently KVM's SVM code switched to re-injecting software interrupt events,
if something prevented their delivery.
Task switch due to task gate in the IDT, however is an exception
to this rule, because in this case, INTn instruction causes
a task switch intercept and its emulation completes the INTn
emulation as well.
Add a missing case to task_switch_interception for that.
This fixes 32 bit kvm unit test taskswitch2.
Fixes: 7e5b5ef8dc ("KVM: SVM: Re-inject INTn instead of retrying the insn on "failure"")
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Message-Id: <20220714124453.188655-1-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Remove a spurious closing paranthesis and tweak the comment about the
cache capacity for PTE descriptors (rmaps) eager page splitting to tone
down the assertion slightly, and to call out that topup requires dropping
mmu_lock, which is the real motivation for avoiding topup (as opposed to
memory usage).
Cc: David Matlack <dmatlack@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220712020724.1262121-4-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Tweak the comment above the computation of the quadrant for PG_LEVEL_4K
shadow pages to explicitly call out how and why KVM uses role.quadrant to
consume gPTE bits.
Opportunistically wrap an unnecessarily long line.
No functional change intended.
Link: https://lore.kernel.org/all/YqvWvBv27fYzOFdE@google.com
Reviewed-by: David Matlack <dmatlack@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220712020724.1262121-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add spte_index() to dedup all the code that calculates a SPTE's index
into its parent's page table and/or spt array. Opportunistically tweak
the calculation to avoid pointer arithmetic, which is subtle (subtract in
8-byte chunks) and less performant (requires the compiler to generate the
subtraction).
Suggested-by: David Matlack <dmatlack@google.com>
Reviewed-by: David Matlack <dmatlack@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220712020724.1262121-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Windows 10/11 guests with Hyper-V role (WSL2) enabled are observed to
hang upon boot or shortly after when a non-default TSC frequency was
set for L1. The issue is observed on a host where TSC scaling is
supported. The problem appears to be that Windows doesn't use TSC
frequency for its guests even when the feature is advertised and KVM
filters SECONDARY_EXEC_TSC_SCALING out when creating L2 controls from
L1's. This leads to L2 running with the default frequency (matching
host's) while L1 is running with an altered one.
Keep SECONDARY_EXEC_TSC_SCALING in secondary exec controls for L2 when
it was set for L1. TSC_MULTIPLIER is already correctly computed and
written by prepare_vmcs02().
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20220712135009.952805-1-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Update the Processor Trace (PT) MSR intercepts during a filter change if
and only if PT may be exposed to the guest, i.e. only if KVM is operating
in the so called "host+guest" mode where PT can be used simultaneously by
both the host and guest. If PT is in system mode, the host is the sole
owner of PT and the MSRs should never be passed through to the guest.
Luckily the missed check only results in unnecessary work, as select RTIT
MSRs are passed through only when RTIT tracing is enabled "in" the guest,
and tracing can't be enabled in the guest when KVM is in system mode
(writes to guest.MSR_IA32_RTIT_CTL are disallowed).
Cc: Xiaoyao Li <xiaoyao.li@intel.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Link: https://lore.kernel.org/r/20220712015838.1253995-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Use cpuid() to get CPUID.0x0 in cpu_vendor_string_is(), thus eliminating
the last open coded usage of CPUID (ignoring debug_regs.c, which emits
CPUID from the guest to trigger a VM-Exit and doesn't actually care about
the results of CPUID).
Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20220614200707.3315957-42-seanjc@google.com
Provide informative error messages for the various checks related to
requesting access to XSAVE features that are buried behind XSAVE Feature
Disabling (XFD).
Opportunistically rename the helper to have "require" in the name so that
it's somewhat obvious that the helper may skip the test.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20220614200707.3315957-41-seanjc@google.com
Skip the AMX test instead of silently returning if the host kernel
doesn't support ARCH_REQ_XCOMP_GUEST_PERM. KVM didn't support XFD until
v5.17, so it's extremely unlikely allowing the test to run on a pre-v5.15
kernel is the right thing to do.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20220614200707.3315957-40-seanjc@google.com
Use kvm_cpu_has() to check for XFD supported in vm_xsave_req_perm(),
simply checking host CPUID doesn't guarantee KVM supports AMX/XFD.
Opportunistically hoist the check above the bit check; if XFD isn't
supported, it's far better to get a "not supported at all" message, as
opposed to a "feature X isn't supported" message".
Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20220614200707.3315957-39-seanjc@google.com
Rename kvm_get_supported_cpuid_index() to __kvm_get_supported_cpuid_entry()
to better show its relationship to kvm_get_supported_cpuid_entry(), and
because the helper returns a CPUID entry, not the index of an entry.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20220614200707.3315957-37-seanjc@google.com
Use kvm_get_supported_cpuid_entry() instead of
kvm_get_supported_cpuid_index() when passing in '0' for the index, which
just so happens to be the case in all remaining users of
kvm_get_supported_cpuid_index() except kvm_get_supported_cpuid_entry().
Keep the helper as there may be users in the future, and it's not doing
any harm.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20220614200707.3315957-36-seanjc@google.com
Add this_cpu_has() to query an X86_FEATURE_* via cpuid(), i.e. to query a
feature from L1 (or L2) guest code. Arbitrarily select the AMX test to
be the first user.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20220614200707.3315957-33-seanjc@google.com
Set the function/index for CPUID in the helper instead of relying on the
caller to do so. In addition to reducing the risk of consuming an
uninitialized ECX, having the function/index embedded in the call makes
it easier to understand what is being checked.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20220614200707.3315957-32-seanjc@google.com
Tag the returned CPUID pointers from kvm_get_supported_cpuid(),
kvm_get_supported_hv_cpuid(), and vcpu_get_supported_hv_cpuid() "const"
to prevent reintroducing the broken pattern of modifying the static
"cpuid" variable used by kvm_get_supported_cpuid() to cache the results
of KVM_GET_SUPPORTED_CPUID.
Update downstream consumers as needed.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20220614200707.3315957-31-seanjc@google.com
