Pull input updates from Dmitry Torokhov:
"Mostly existing driver fixes plus a new driver for game controllers
directly connected to Nintendo 64, and an enhancement for keyboards
driven by Chrome OS EC to communicate layout of the top row to
userspace"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (47 commits)
Input: st1232 - fix NORMAL vs. IDLE state handling
Input: aiptek - convert sysfs sprintf/snprintf family to sysfs_emit
Input: alps - fix spelling of "positive"
ARM: dts: cros-ec-keyboard: Use keymap macros
dt-bindings: input: Fix the keymap for LOCK key
dt-bindings: input: Create macros for cros-ec keymap
Input: cros-ec-keyb - expose function row physical map to userspace
dt-bindings: input: cros-ec-keyb: Add a new property describing top row
Input: applespi - fix occasional crc errors under load.
Input: applespi - don't wait for responses to commands indefinitely.
Input: st1232 - add IDLE state as ready condition
Input: zinitix - fix return type of zinitix_init_touch()
Input: i8042 - add ASUS Zenbook Flip to noselftest list
Input: add missing dependencies on CONFIG_HAS_IOMEM
Input: joydev - prevent potential read overflow in ioctl
Input: elo - fix an error code in elo_connect()
Input: xpad - add support for PowerA Enhanced Wired Controller for Xbox Series X|S
Input: sur40 - fix an error code in sur40_probe()
Input: elants_i2c - detect enum overflow
Input: zinitix - remove unneeded semicolon
...
Pull ARM SoC platform removals from Arnd Bergmann:
"There are a lot of platforms that have not seen any interesting code
changes in the past five years or more.
I made a list and asked around which ones are no longer in use, and
received confirmation about six ARM platforms and the TI C6x
architecture that have all reached the end of their life upstream,
with no known users remaining:
- efm32 - added in 2011, first Cortex-M, no notable changes after 2013
- picoxcell - added in 2011, abandoned after 2012 acquisition
- prima2 - added in 20111, no notable changes since 2015
- tango - added in 2015, sporadic changes until 2017, but abandoned
- u300 - added in 2009, no notable changes since 2013
- zx - added in 2015 for both 32, 2017 for 64 bit, no notable changes
- arch/c6x - added in 2011, but work stalled soon after that
A number of other platforms on the original list turned out to still
have users. In some cases there are out-of-tree patches and users that
plan to contribute them in the future, in other cases the code is
complete and works reliably"
Link: https://lore.kernel.org/lkml/CAK8P3a2DZ8xQp7R=H=wewHnT2=a_=M53QsZOueMVEf7tOZLKNg@mail.gmail.com/
* tag 'arm-platform-removal-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
ARM: remove u300 platform
ARM: remove tango platform
ARM: remove zte zx platform
ARM: remove sirf prima2/atlas platforms
c6x: remove architecture
MAINTAINERS: Remove deleted platform efm32
ARM: drop efm32 platform
ARM: Remove PicoXcell platform support
ARM: dts: Remove PicoXcell platforms
AMD EthanolX CRB uses 2-byte POST codes which are sent to ports 0x80/0x81.
Currently ASPEED controller snoops only 0x80 port and therefore captures
only the lower byte of each POST code.
Enable secondary LPC snooping address to capture the higher byte of POST
codes.
Signed-off-by: Konstantin Aladyshev <aladyshev22@gmail.com>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Link: https://lore.kernel.org/r/20210127182326.424-1-aladyshev22@gmail.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
The Ebang EBAZ4205 is a simple board based on the Xilinx Zynq-7000 SoC.
Its features are:
- one serial port
- 256 MB RAM
- 128 MB NAND flash
- SDcard slot
- IP101GA 10/100 Mbit Ethernet PHY (connected to PL IOs)
- two LEDs (connected to PL IOs)
- one Push Button (connect to PL IOs)
- (optional) RTC
- (optional) Input voltage supervisor
The NAND flash is not supported in mainline linux yet. Unfortunately,
the PHY is connected via the PL, thus for working ethernet the FPGA has
to be configured. Also, depending on the board variant, the PHY has no
external crystal and its clock needs to be driven by the PL. FCLK3 is
used for this and is kept enabled.
Signed-off-by: Michael Walle <michael@walle.cc>
Link: https://lore.kernel.org/r/20210120194033.26970-4-michael@walle.cc
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Fixed indices for mmc nodes; removal of obsolete amba bus nodes;
addition of nand flash controller odes to rk3036, rk2928, rv1108;
gpu node for rk3288-miqi and some cleanups to make dtbscheck happier.
* tag 'v5.12-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
ARM: dts: rockchip: assign a fixed index to mmc devices on rv1108 boards
ARM: dts: rockchip: assign a fixed index to mmc devices on rk322x boards
ARM: dts: rockchip: Remove bogus "amba" bus nodes
ARM: dts: rockchip: Add NFC node for RK3036 SoC
ARM: dts: rockchip: Add NFC node for RK2928 and other SoCs
ARM: dts: rockchip: Add NFC node for RV1108 SoC
ARM: dts: rockchip: rename thermal subnodes for rk3288
ARM: dts: rockchip: add QoS register compatibles for rk3288
ARM: dts: rockchip: add QoS register compatibles for rk3066/rk3188
ARM: dts: rockchip: add gpu node to rk3288-miqi
Link: https://lore.kernel.org/r/2184150.ElGaqSPkdT@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Actions Semi ARM DT changes for v5.12:
Updates to the existing S500 ARM SoC. Support has been added for CMU (Clock
Management Unit), Reset controller, DMA, Pinctrl/GPIO, MMC, I2C and SIRQ
(interrupt controller). Since the CMU support is added, the dummy fixed clock
used for the UART controller has been removed for all S500 based boards and
proper UART clock from CMU is used.
Added uSD support and I2C pinctrl configuration for Roseapplepi board based on
S500 SoC. This will make the board boot mainline with a distro from uSD card.
The I2C pinctrl config is added specifically for the PMIC which is currently
under review.
* tag 'actions-arm-dt-for-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/mani/linux-actions:
arm: dts: owl-s500-roseapplepi: Add I2C pinctrl configuration
arm: dts: owl-s500-roseapplepi: Add uSD support
arm: dts: owl-s500: Add SIRQ controller
arm: dts: owl-s500: Add I2C support
arm: dts: owl-s500: Add MMC support
arm: dts: owl-s500: Add pinctrl & GPIO support
arm: dts: owl-s500: Add DMA controller
arm: dts: owl-s500: Add Reset controller
arm: dts: owl-s500: Set CMU clocks for UARTs
arm: dts: owl-s500: Add Clock Management Unit
Link: https://lore.kernel.org/r/20210205050346.GA7619@thinkpad
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
i.MX device tree change for 5.12:
- A series from Oleksij Rempel to add i.MX6 based Plymovent, Protonic
and Kverneland boards.
- A series from Andreas Kemnade to improve UART support for ebook
readers.
- A series from Fabio Estevam to update imx6ul-14x14-evk device tree for
adding GPIO expander and camera support.
- A patch set from Lucas Stach to improve ZII RDU2 support, enabling
WDOG, tuning I2C drive-strength, RMI4 and UCS1002 ALERT.
- Other small and random updates on various boards.
* tag 'imx-dt-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (37 commits)
ARM: dts: imx6: RDU2: adjust audio devices nomenclature
ARM: dts: imx6: RDU2: only trigger IRQ on falling edge ucs1002 ALERT pin
ARM: dts: imx6: RDU2: enable RMI4 reduced reporting
ARM: dts: imx6: RDU2: reduce i2c drive-strength
ARM: dts: imx6: rdu2: enable WDOG1
ARM: dts: imx6-sr-som: increase at8035 PHY gigabit Tw parameter
ARM: dts: imx6: add wakeup support via magic packet
firmware: imx: select SOC_BUS to fix firmware build
arm64: dts: imx8mp: Correct the gpio ranges of gpio3
ARM: dts: imx6qdl-sr-som: fix some cubox-i platforms
ARM: dts: imx: e60k02: add second uart
ARM: dts: imx6sl-tolino-shine3: correct console uart pinmux
ARM: dts: imx6sl-tolino-shine2hd: add second uart
ARM: dts: imx6sl-tolino-shine2hd: correct console uart pinmux
ARM: imx: build suspend-imx6.S with arm instruction set
ARM: dts: imx7d-flex-concentrator: fix pcf2127 reset
ARM: dts: add Kverneland TGO board
ARM: dts: add Kverneland UT1, UT1Q and UT1P
ARM: dts: imx6ul-14x14-evk: Add camera support
ARM: dts: imx6ul-14x14-evk: Describe the KSZ8081 reset
...
Link: https://lore.kernel.org/r/20210204120150.26186-4-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
ARM: dts: amlogic updates for v5.12
- add thermal zones with cooling configuration
* tag 'amlogic-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
ARM: dts: meson8b: add the thermal-zones with cooling configuration
ARM: dts: meson8: add the thermal-zones with cooling configuration
ARM: dts: meson: add the ADC thermal sensor to meson.dtsi
ARM: dts: meson: move iio-hwmon for the SoC temperature to meson.dtsi
Link: https://lore.kernel.org/r/7ho8h12bto.fsf@baylibre.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The 32-bit Amlogic Meson SoCs embed an ARC processor in the Always-On
power domain which is typically used for managing system suspend. The
memory for this ARC core is taken from the AHB SRAM area. Depending on
the actual SoC a different ARC core is used:
- Meson6 and earlier: some ARCv1 ISA based core (probably an ARC625)
- Meson8 and later: an ARC EM4 (ARCv2 ISA) based core
Add the device-tree node for this remote-processor along with the
required SRAM sections, clocks and reset-lines. Also use the
SoC-specific compatible string to manage any differences (should
they exist).
On Meson8, Meson8b and Meson8m2 the "secbus2" IO region is needed as
some bits need to be programmed there. Add this IO region for those
SoCs as well.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/20210102205904.2691120-6-martin.blumenstingl@googlemail.com
One fix for a phy-mode ethernet issue, and one to fix the display output on
SoCs with the Display Engine 2
* tag 'sunxi-fixes-for-5.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
ARM: dts: sun7i: a20: bananapro: Fix ethernet phy-mode
soc: sunxi: mbus: Remove DE2 display engine compatibles
Link: https://lore.kernel.org/r/f8298059-f9ca-43b4-9e29-35bc0e0c9b15.lettre@localhost
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This reverts commit c17e9377aa.
The lpc32xx clock driver is not able to actually change the PLL rate as
this would require reparenting ARM_CLK, DDRAM_CLK, PERIPH_CLK to SYSCLK,
then stop the PLL, update the register, restart the PLL and wait for the
PLL to lock and finally reparent ARM_CLK, DDRAM_CLK, PERIPH_CLK to HCLK
PLL.
Currently, the HCLK driver simply updates the registers but this has no
real effect and all the clock rate calculation end up being wrong. This is
especially annoying for the peripheral (e.g. UARTs, I2C, SPI).
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Tested-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Link: https://lore.kernel.org/r/20210203090320.GA3760268@piout.net'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
BPi Pro needs TX and RX delay for Gbit to work reliable and avoid high
packet loss rates. The realtek phy driver overrides the settings of the
pull ups for the delays, so fix this for BananaPro.
Fix the phy-mode description to correctly reflect this so that the
implementation doesn't reconfigure the delays incorrectly. This
happened with commit bbc4d71d63 ("net: phy: realtek: fix rtl8211e
rx/tx delay config").
Fixes: 10662a33dc ("ARM: dts: sun7i: Add dts file for Bananapro board")
Signed-off-by: Hermann Lauer <Hermann.Lauer@uni-heidelberg.de>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20210128111842.GA11919@lemon.iwr.uni-heidelberg.de
This adds support for the power button attached to the Embedded Controller
on a Dell Wyse 3020 "Ariel" board.
However, while the EC itself is controlled via I2C, the input capability
for the power button acts as a separate device attached to the SPI, hence
it has a separate device node.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Link: https://lore.kernel.org/r/20210121034130.1381872-11-lkundrak@v3.sk'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Drop the linux,usable-memory properties; the schema is unhappy about
them.
They've been cargo-culted from Open Firmware and I don't know what
purpose they serve. Perhaps they are meant to provide the OFW runtime.
In that case it's still okay to drop them from here; OFW is welcome to add
it upon boot.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Link: https://lore.kernel.org/r/20210121034130.1381872-6-lkundrak@v3.sk'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Drop the linux,usable-memory properties; the schema is unhappy about
them:
mmp2-olpc-xo-1-75.dt.yaml: /: memory: False schema does not allow
{'linux,usable-memory': [[0, 528482304]],
'available': [[847872, 519245824, 4096, 782336]],
'reg': [[0, 536870912]], 'device_type': ['memory']}
They've been cargo-culted from Open Firmware and I don't know what
purpose they serve. Perhaps they are meant to provide the OFW runtime.
In that case it's still okay to drop them from here; OFW is welcome to add
it upon boot.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Link: https://lore.kernel.org/r/20210121034130.1381872-5-lkundrak@v3.sk'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
mvebu dt for 5.12 (part 1)
Improve LED and fan support on Helios4 boad (Armada 388 based)
Add ECC configuration for Linksys board (Aramda 385 based)
* tag 'mvebu-dt-5.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu:
ARM: dts: armada388-helios4: assign pinctrl to each fan
ARM: dts: armada388-helios4: assign pinctrl to LEDs
ARM: dts: armada-385-linksys: fix usage with newer devices
Link: https://lore.kernel.org/r/87sg6fn49o.fsf@BL-laptop
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
