Commit Graph

4330 Commits

Author SHA1 Message Date
Christophe Leroy
cd99ddbea2 powerpc/8xx: Only perform perf counting when perf is in use.
In TLB miss handlers, updating the perf counter is only useful
when performing a perf analysis. As it has a noticeable overhead,
let's only do it when needed.

In order to do so, the exit of the miss handlers will be patched
when starting/stopping 'perf': the first register restore
instruction of each exit point will be replaced by a jump to
the counting code.

Once this is done, CONFIG_PPC_8xx_PERF_EVENT becomes useless as
this feature doesn't add any overhead.

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-01-16 23:47:12 +11:00
Christophe Leroy
2a45addd21 powerpc/8xx: Remove CPU6 ERRATA Workaround
CPU6 ERRATA affects only MPC860 revisions prior to C.0. Manufacturing
of those revisiosn was stopped in 1999-2000.
Therefore, it has been almost 20 years since this ERRATA has been
fixed in the silicon.

This patch removes the workaround for that ERRATA.

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-01-16 23:47:12 +11:00
Balbir Singh
4145f35864 powernv/kdump: Fix cases where the kdump kernel can get HMI's
Certain HMI's such as malfunction error propagate through
all threads/core on the system. If a thread was offline
prior to us crashing the system and jumping to the kdump
kernel, bad things happen when it wakes up due to an HMI
in the kdump kernel.

There are several possible ways to solve this problem

1. Put the offline cores in a state such that they are
not woken up for machine check and HMI errors. This
does not work, since we might need to wake up offline
threads to handle TB errors
2. Ignore HMI errors, setup HMEER to mask HMI errors,
but this still leads the window open for any MCEs
and masking them for the duration of the dump might
be a concern
3. Wake up offline CPUs, as in send them to
crash_ipi_callback (not wake them up as in mark them
online as seen by the hotplug). kexec does a
wake_online_cpus() call, this patch does something
similar, but instead sends an IPI and forces them to
crash_ipi_callback()

This patch takes approach #3.

Care is taken to enable this only for powenv platforms
via crash_wake_offline (a global value set at setup
time). The crash code sends out IPI's to all CPU's
which then move to crash_ipi_callback and kexec_smp_wait().

Signed-off-by: Balbir Singh <bsingharora@gmail.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-01-16 23:47:11 +11:00
Nathan Fontenot
0c38ed6f6f powerpc/pseries: Enable support of ibm,dynamic-memory-v2
Add required bits to the architecture vector to enable support
of the ibm,dynamic-memory-v2 device tree property.

Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-01-16 23:26:30 +11:00
Nathan Fontenot
2b31e3aec1 powerpc/drmem: Add support for ibm, dynamic-memory-v2 property
The Power Hypervisor has introduced a new device tree format for
the property describing the dynamic reconfiguration LMBs for a system,
ibm,dynamic-memory-v2. This new format condenses the size of the
property, especially on large memory systems, by reporting sets
of LMBs that have the same properties (flags and associativity array
index).

This patch updates the powerpc/mm/drmem.c code to provide routines
that can parse the new device tree format during the walk_drmem_lmb*
routines used during boot, the creation of the LMB array, and updating
the device tree to create a new property in the proper format for
ibm,dynamic-memory-v2.

Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-01-16 23:26:29 +11:00
Nathan Fontenot
2c77721552 powerpc: Move of_drconf_cell struct to asm/drmem.h
Now that the powerpc code parses dynamic reconfiguration memory
LMB information from the LMB array and not the device tree
directly we can move the of_drconf_cell struct to drmem.h where
it fits better.

In addition, the struct is renamed to of_drconf_cell_v1 in
anticipation of upcoming support for version 2 of the dynamic
reconfiguration property and the members are typed as __be*
values to reflect how they exist in the device tree.

Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-01-16 23:26:29 +11:00
Nathan Fontenot
6195a5001f powerpc/pseries: Update memory hotplug code to use drmem LMB array
Update the pseries memory hotplug code to use the newly added
dynamic reconfiguration LMB array. Doing this is required for the
upcoming support of version 2 of the dynamic reconfiguration
device tree property.

In addition, making this change cleans up the code that parses the
LMB information as we no longer need to worry about device tree
format. This allows us to discard one of the first steps on memory
hotplug where we make a working copy of the device tree property and
convert the entire property to cpu format. Instead we just use the
LMB array directly while holding the memory hotplug lock.

This patch also moves the updating of the device tree property to
powerpc/mm/drmem.c. This allows to the hotplug code to work without
needing to know the device tree format and provides a single
routine for updating the device tree property. This new routine
will handle determination of the proper device tree format and
generate a properly formatted device tree property.

Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-01-16 23:26:28 +11:00
Nathan Fontenot
514a9cb331 powerpc/numa: Update numa code use walk_drmem_lmbs
Update code in powerpc/numa.c to use the walk_drmem_lmbs()
routine instead of parsing the device tree directly. This is
in anticipation of introducing a new ibm,dynamic-memory-v2
property with a different format. This will allow the numa code
to use a single initialization routine per-LMB irregardless of
the device tree format.

Additionally, to support additional routines in numa.c that need
to look up LMB information, an late_init routine is added to drmem.c
to allocate the array of LMB information. This LMB array will provide
per-LMB information to separate the LMB data from the device tree
format.

Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-01-16 23:26:28 +11:00
Nathan Fontenot
6c6ea53725 powerpc/mm: Separate ibm, dynamic-memory data from DT format
We currently have code to parse the dynamic reconfiguration LMB
information from the ibm,dynamic-meory device tree property in
multiple locations; numa.c, prom.c, and pseries/hotplug-memory.c.
In anticipation of adding support for a version 2 of the
ibm,dynamic-memory property this patch aims to separate the device
tree information from the device tree format.

Doing this requires a two step process to avoid a possibly very large
bootmem allocation early in boot. During initial boot, new routines
are provided to walk the device tree property and make a call-back
for each LMB.

The second step (introduced in later patches) will allocate an
array of LMB information that can be used directly without needing
to know the DT format.

This approach provides the benefit of consolidating the device tree
property parsing to a single location and (eventually) providing
a common data structure for retrieving LMB information.

This patch introduces a routine to walk the ibm,dynamic-memory
property in the flattened device tree and updates the prom.c code
to use this to initialize memory.

Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-01-16 23:26:27 +11:00
Eric W. Biederman
ea64d5acc8 signal: Unify and correct copy_siginfo_to_user32
Among the existing architecture specific versions of
copy_siginfo_to_user32 there are several different implementation
problems.  Some architectures fail to handle all of the cases in in
the siginfo union.  Some architectures perform a blind copy of the
siginfo union when the si_code is negative.  A blind copy suggests the
data is expected to be in 32bit siginfo format, which means that
receiving such a signal via signalfd won't work, or that the data is
in 64bit siginfo and the code is copying nonsense to userspace.

Create a single instance of copy_siginfo_to_user32 that all of the
architectures can share, and teach it to handle all of the cases in
the siginfo union correctly, with the assumption that siginfo is
stored internally to the kernel is 64bit siginfo format.

A special case is made for x86 x32 format.  This is needed as presence
of both x32 and ia32 on x86_64 results in two different 32bit signal
formats.  By allowing this small special case there winds up being
exactly one code base that needs to be maintained between all of the
architectures.  Vastly increasing the testing base and the chances of
finding bugs.

As the x86 copy of copy_siginfo_to_user32 the call of the x86
signal_compat_build_tests were moved into sigaction_compat_abi, so
that they will keep running.

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-01-15 19:56:20 -06:00
Paul Mackerras
5855564c8a KVM: PPC: Book3S HV: Enable migration of decrementer register
This adds a register identifier for use with the one_reg interface
to allow the decrementer expiry time to be read and written by
userspace.  The decrementer expiry time is in guest timebase units
and is equal to the sum of the decrementer and the guest timebase.
(The expiry time is used rather than the decrementer value itself
because the expiry time is not constantly changing, though the
decrementer value is, while the guest vcpu is not running.)

Without this, a guest vcpu migrated to a new host will see its
decrementer set to some random value.  On POWER8 and earlier, the
decrementer is 32 bits wide and counts down at 512MHz, so the
guest vcpu will potentially see no decrementer interrupts for up
to about 4 seconds, which will lead to a stall.  With POWER9, the
decrementer is now 56 bits side, so the stall can be much longer
(up to 2.23 years) and more noticeable.

To help work around the problem in cases where userspace has not been
updated to migrate the decrementer expiry time, we now set the
default decrementer expiry at vcpu creation time to the current time
rather than the maximum possible value.  This should mean an
immediate decrementer interrupt when a migrated vcpu starts
running.  In cases where the decrementer is 32 bits wide and more
than 4 seconds elapse between the creation of the vcpu and when it
first runs, the decrementer would have wrapped around to positive
values and there may still be a stall - but this is no worse than
the current situation.  In the large-decrementer case, we are sure
to get an immediate decrementer interrupt (assuming the time from
vcpu creation to first run is less than 2.23 years) and we thus
avoid a very long stall.

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2018-01-16 11:54:45 +11:00
Eric W. Biederman
ad2b1ab57d signal/powerpc: Remove redefinition of NSIGTRAP on powerpc
NSIGTRAP is 4 in the generic siginfo and powerpc just undefines
NSGTRAP and redefine it as 4.  That accomplishes nothing so remove
the duplication.

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-01-15 17:42:33 -06:00
Al Viro
b713da69e4 signal: unify compat_siginfo_t
--EWB Added #ifdef CONFIG_X86_X32_ABI to arch/x86/kernel/signal_compat.c
      Changed #ifdef CONFIG_X86_X32 to #ifdef CONFIG_X86_X32_ABI in
      linux/compat.h

      CONFIG_X86_X32 is set when the user requests X32 support.

      CONFIG_X86_X32_ABI is set when the user requests X32 support
      and the tool-chain has X32 allowing X32 support to be built.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2018-01-15 17:40:31 -06:00
Christoph Hellwig
a37a3710f3 powerpc: rename swiotlb_dma_ops
We'll need that name for a generic implementation soon.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2018-01-15 09:35:26 +01:00
Linus Torvalds
6bb821193b powerpc fixes for 4.15 #7
One fix for an oops at boot if we take a hotplug interrupt before we are ready
 to handle it.
 
 The bulk is patches to implement mitigation for Meltdown, see the change logs
 for more details.
 
 Thanks to:
   Nicholas Piggin, Michael Neuling, Oliver O'Halloran, Jon Masters, Jose Ricardo
   Ziviani, David Gibson.
 -----BEGIN PGP SIGNATURE-----
 
 iQIwBAABCAAaBQJaWXZ+ExxtcGVAZWxsZXJtYW4uaWQuYXUACgkQUevqPMjhpYBe
 ew/+KMp80VAIGSyFeYHLg8oClnQjKcEDMzlNoHo8WU6NwwNzk2XXBXNaGT7Osg7B
 Ny69R3/VRrGmi/2uule9OzF2eZt8BUmRn3cHDcUB5OwFjMysv4M2jc+OK0STQxLU
 F769rX+ZlkyAvQn4UxtNCUob+JDfVbE5Lurrx475ZGL1YHk6QqBGhlN/niXKtkBz
 upeBEpu4JgwsLLD9H7c4QQha9PkhxY51jtvxL24cgwDuKJKhTdxLahPlA3QmLafu
 FJxR9R0YzTj9Ivuae5yM7xRKr5wROTPtTRbG9sN7XOgFNrQ+LSgemXGrlV/fzdhV
 6iPn2hHs4bu45SOIM+Hhf7OwHTtnMetXmKo6NldlKHVCw1HwBLigRohnOTPjiHfZ
 P6brR4T/cglakBiE29+8T0UFqOPizEJiQRHnsoWzwIa/aTqCGEE3m3rgTxU6ovt5
 3JggC51ZRDFsjGvj+JFnxGxCjYC4tDbfBI28M+GuWZZPBKLkFnEk8PlSzYyHPW2p
 5uVA/UN4KHVGYUfJVUC+LMP+ZIOSEyEISKk7RuK0C0mwHSXcvxbeEefXbc18Xjai
 J/pl/c9/4CRnEbdPm305xBxKKmU6gWxWRK3KbRFsoTI/wp+Ryx5TjPpgAa5GnaLv
 nrtrfKs8skWfGMoDWH7+KILt0fgRR2x+91GTSxc5aaHtYBI=
 =UZHv
 -----END PGP SIGNATURE-----

Merge tag 'powerpc-4.15-7' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux

Pull powerpc fixes from Michael Ellerman:
 "One fix for an oops at boot if we take a hotplug interrupt before we
  are ready to handle it.

  The bulk is patches to implement mitigation for Meltdown, see the
  change logs for more details.

  Thanks to: Nicholas Piggin, Michael Neuling, Oliver O'Halloran, Jon
  Masters, Jose Ricardo Ziviani, David Gibson"

* tag 'powerpc-4.15-7' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/powernv: Check device-tree for RFI flush settings
  powerpc/pseries: Query hypervisor for RFI flush settings
  powerpc/64s: Support disabling RFI flush with no_rfi_flush and nopti
  powerpc/64s: Add support for RFI flush of L1-D cache
  powerpc/64s: Convert slb_miss_common to use RFI_TO_USER/KERNEL
  powerpc/64: Convert fast_exception_return to use RFI_TO_USER/KERNEL
  powerpc/64: Convert the syscall exit path to use RFI_TO_USER/KERNEL
  powerpc/64s: Simple RFI macro conversions
  powerpc/64: Add macros for annotating the destination of rfid/hrfid
  powerpc/pseries: Add H_GET_CPU_CHARACTERISTICS flags & wrapper
  powerpc/pseries: Make RAS IRQ explicitly dependent on DLPAR WQ
2018-01-14 15:03:17 -08:00
Eric W. Biederman
2f82a46f66 signal: Remove _sys_private and _overrun_incr from struct compat_siginfo
We have never passed either field to or from userspace so just remove them.

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-01-12 14:34:46 -06:00
Eric W. Biederman
cf4674c46c signal/powerpc: Document conflicts with SI_USER and SIGFPE and SIGTRAP
Setting si_code to 0 results in a userspace seeing an si_code of 0.
This is the same si_code as SI_USER.  Posix and common sense requires
that SI_USER not be a signal specific si_code.  As such this use of 0
for the si_code is a pretty horribly broken ABI.

Further use of si_code == 0 guaranteed that copy_siginfo_to_user saw a
value of __SI_KILL and now sees a value of SIL_KILL with the result
that uid and pid fields are copied and which might copying the si_addr
field by accident but certainly not by design.  Making this a very
flakey implementation.

Utilizing FPE_FIXME and TRAP_FIXME, siginfo_layout() will now return
SIL_FAULT and the appropriate fields will be reliably copied.

Possible ABI fixes includee:
- Send the signal without siginfo
- Don't generate a signal
- Possibly assign and use an appropriate si_code
- Don't handle cases which can't happen
Cc: Paul Mackerras <paulus@samba.org>
Cc: Kumar Gala <kumar.gala@freescale.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc:  linuxppc-dev@lists.ozlabs.org
Ref: 9bad068c24d7 ("[PATCH] ppc32: support for e500 and 85xx")
Ref: 0ed70f6105ef ("PPC32: Provide proper siginfo information on various exceptions.")
History Tree: https://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-01-12 14:21:04 -06:00
Benjamin Herrenschmidt
7f1c410da5 powerpc/xive: Add interrupt flag to disable automatic EOI
This will be used by KVM in order to keep escalation interrupts
in the non-EOI (masked) state after they fire. They will be
re-enabled directly in HW by KVM when needed.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-01-12 15:24:44 +11:00
Benjamin Herrenschmidt
12c1f339cd powerpc/xive: Move definition of ESB bits
From xive.h to xive-regs.h since it's a HW register definition
and it can be used from assembly

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-01-12 15:24:41 +11:00
Christoph Hellwig
2d9d6f6c9e powerpc: rename dma_direct_ to dma_nommu_
We want to use the dma_direct_ namespace for a generic implementation,
so rename powerpc to the second best choice: dma_nommu_.

Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-01-10 16:41:14 +01:00
Christoph Hellwig
b49efd7624 dma-mapping: move dma_mark_clean to dma-direct.h
And unlike the other helpers we don't require a <asm/dma-direct.h> as
this helper is a special case for ia64 only, and this keeps it as
simple as possible.

Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-01-10 16:41:12 +01:00
Christoph Hellwig
ea8c64ace8 dma-mapping: move swiotlb arch helpers to a new header
phys_to_dma, dma_to_phys and dma_capable are helpers published by
architecture code for use of swiotlb and xen-swiotlb only.  Drivers are
not supposed to use these directly, but use the DMA API instead.

Move these to a new asm/dma-direct.h helper, included by a
linux/dma-direct.h wrapper that provides the default linear mapping
unless the architecture wants to override it.

In the MIPS case the existing dma-coherent.h is reused for now as
untangling it will take a bit of work.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Robin Murphy <robin.murphy@arm.com>
2018-01-10 16:40:54 +01:00
Michael Ellerman
aa8a5e0062 powerpc/64s: Add support for RFI flush of L1-D cache
On some CPUs we can prevent the Meltdown vulnerability by flushing the
L1-D cache on exit from kernel to user mode, and from hypervisor to
guest.

This is known to be the case on at least Power7, Power8 and Power9. At
this time we do not know the status of the vulnerability on other CPUs
such as the 970 (Apple G5), pasemi CPUs (AmigaOne X1000) or Freescale
CPUs. As more information comes to light we can enable this, or other
mechanisms on those CPUs.

The vulnerability occurs when the load of an architecturally
inaccessible memory region (eg. userspace load of kernel memory) is
speculatively executed to the point where its result can influence the
address of a subsequent speculatively executed load.

In order for that to happen, the first load must hit in the L1,
because before the load is sent to the L2 the permission check is
performed. Therefore if no kernel addresses hit in the L1 the
vulnerability can not occur. We can ensure that is the case by
flushing the L1 whenever we return to userspace. Similarly for
hypervisor vs guest.

In order to flush the L1-D cache on exit, we add a section of nops at
each (h)rfi location that returns to a lower privileged context, and
patch that with some sequence. Newer firmwares are able to advertise
to us that there is a special nop instruction that flushes the L1-D.
If we do not see that advertised, we fall back to doing a displacement
flush in software.

For guest kernels we support migration between some CPU versions, and
different CPUs may use different flush instructions. So that we are
prepared to migrate to a machine with a different flush instruction
activated, we may have to patch more than one flush instruction at
boot if the hypervisor tells us to.

In the end this patch is mostly the work of Nicholas Piggin and
Michael Ellerman. However a cast of thousands contributed to analysis
of the issue, earlier versions of the patch, back ports testing etc.
Many thanks to all of them.

Tested-by: Jon Masters <jcm@redhat.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-01-10 21:27:06 +11:00
David Howells
0500871f21 Construct init thread stack in the linker script rather than by union
Construct the init thread stack in the linker script rather than doing it
by means of a union so that ia64's init_task.c can be got rid of.

The following symbols are then made available from INIT_TASK_DATA() linker
script macro:

	init_thread_union
	init_stack

INIT_TASK_DATA() also expands the region to THREAD_SIZE to accommodate the
size of the init stack.  init_thread_union is given its own section so that
it can be placed into the stack space in the right order.  I'm assuming
that the ia64 ordering is correct and that the task_struct is first and the
thread_info second.

Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Tony Luck <tony.luck@intel.com>
Tested-by: Will Deacon <will.deacon@arm.com> (arm64)
Tested-by: Palmer Dabbelt <palmer@sifive.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
2018-01-09 23:21:02 +00:00
Nicholas Piggin
222f20f140 powerpc/64s: Simple RFI macro conversions
This commit does simple conversions of rfi/rfid to the new macros that
include the expected destination context. By simple we mean cases
where there is a single well known destination context, and it's
simply a matter of substituting the instruction for the appropriate
macro.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-01-10 03:07:30 +11:00
Nicholas Piggin
50e51c13b3 powerpc/64: Add macros for annotating the destination of rfid/hrfid
The rfid/hrfid ((Hypervisor) Return From Interrupt) instruction is
used for switching from the kernel to userspace, and from the
hypervisor to the guest kernel. However it can and is also used for
other transitions, eg. from real mode kernel code to virtual mode
kernel code, and it's not always clear from the code what the
destination context is.

To make it clearer when reading the code, add macros which encode the
expected destination context.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-01-10 03:07:30 +11:00
Christoph Hellwig
c91a7a405b powerpc: remove unused flush_write_buffers definition
Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-01-09 16:28:36 +01:00
Michael Ellerman
a6978f405d Merge branch 'topic/ppc-kvm' into fixes
Merge the topic branch with share with the kvm-ppc tree. In this case
we need to share the definition of a new hypervisor call and
associated flags.
2018-01-10 02:24:34 +11:00
Michael Neuling
191eccb158 powerpc/pseries: Add H_GET_CPU_CHARACTERISTICS flags & wrapper
A new hypervisor call has been defined to communicate various
characteristics of the CPU to guests. Add definitions for the hcall
number, flags and a wrapper function.

Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-01-10 01:46:34 +11:00
Sergey Senozhatsky
5633e85b2c powerpc64: Add .opd based function descriptor dereference
We are moving towards separate kernel and module function descriptor
dereference callbacks. This patch enables it for powerpc64.

For pointers that belong to the kernel
-  Added __start_opd and __end_opd pointers, to track the kernel
   .opd section address range;

-  Added dereference_kernel_function_descriptor(). Now we
   will dereference only function pointers that are within
   [__start_opd, __end_opd);

For pointers that belong to a module
-  Added dereference_module_function_descriptor() to handle module
   function descriptor dereference. Now we will dereference only
   pointers that are within [module->opd.start, module->opd.end).

Link: http://lkml.kernel.org/r/20171109234830.5067-4-sergey.senozhatsky@gmail.com
To: Tony Luck <tony.luck@intel.com>
To: Fenghua Yu <fenghua.yu@intel.com>
To: Helge Deller <deller@gmx.de>
To: Benjamin Herrenschmidt <benh@kernel.crashing.org>
To: Paul Mackerras <paulus@samba.org>
To: Michael Ellerman <mpe@ellerman.id.au>
To: James Bottomley <jejb@parisc-linux.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jessica Yu <jeyu@kernel.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: linux-ia64@vger.kernel.org
Cc: linux-parisc@vger.kernel.org
Cc: linuxppc-dev@lists.ozlabs.org
Cc: linux-kernel@vger.kernel.org
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Tested-by: Santosh Sivaraj <santosh@fossix.org> #powerpc
Signed-off-by: Petr Mladek <pmladek@suse.com>
2018-01-09 10:45:37 +01:00
Stephen Boyd
e0af0c1610 arch: Remove clkdev.h asm-generic from Kbuild
Now that every architecture is using the generic clkdev.h file
and we no longer include asm/clkdev.h anywhere in the tree, we
can remove it.

Cc: Russell King <linux@armlinux.org.uk>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Cc: <linux-arch@vger.kernel.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> [m68k]
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2018-01-03 09:02:11 -08:00
Linus Torvalds
caf9a82657 Merge branch 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 PTI preparatory patches from Thomas Gleixner:
 "Todays Advent calendar window contains twentyfour easy to digest
  patches. The original plan was to have twenty three matching the date,
  but a late fixup made that moot.

   - Move the cpu_entry_area mapping out of the fixmap into a separate
     address space. That's necessary because the fixmap becomes too big
     with NRCPUS=8192 and this caused already subtle and hard to
     diagnose failures.

     The top most patch is fresh from today and cures a brain slip of
     that tall grumpy german greybeard, who ignored the intricacies of
     32bit wraparounds.

   - Limit the number of CPUs on 32bit to 64. That's insane big already,
     but at least it's small enough to prevent address space issues with
     the cpu_entry_area map, which have been observed and debugged with
     the fixmap code

   - A few TLB flush fixes in various places plus documentation which of
     the TLB functions should be used for what.

   - Rename the SYSENTER stack to CPU_ENTRY_AREA stack as it is used for
     more than sysenter now and keeping the name makes backtraces
     confusing.

   - Prevent LDT inheritance on exec() by moving it to arch_dup_mmap(),
     which is only invoked on fork().

   - Make vysycall more robust.

   - A few fixes and cleanups of the debug_pagetables code. Check
     PAGE_PRESENT instead of checking the PTE for 0 and a cleanup of the
     C89 initialization of the address hint array which already was out
     of sync with the index enums.

   - Move the ESPFIX init to a different place to prepare for PTI.

   - Several code moves with no functional change to make PTI
     integration simpler and header files less convoluted.

   - Documentation fixes and clarifications"

* 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits)
  x86/cpu_entry_area: Prevent wraparound in setup_cpu_entry_area_ptes() on 32bit
  init: Invoke init_espfix_bsp() from mm_init()
  x86/cpu_entry_area: Move it out of the fixmap
  x86/cpu_entry_area: Move it to a separate unit
  x86/mm: Create asm/invpcid.h
  x86/mm: Put MMU to hardware ASID translation in one place
  x86/mm: Remove hard-coded ASID limit checks
  x86/mm: Move the CR3 construction functions to tlbflush.h
  x86/mm: Add comments to clarify which TLB-flush functions are supposed to flush what
  x86/mm: Remove superfluous barriers
  x86/mm: Use __flush_tlb_one() for kernel memory
  x86/microcode: Dont abuse the TLB-flush interface
  x86/uv: Use the right TLB-flush API
  x86/entry: Rename SYSENTER_stack to CPU_ENTRY_AREA_entry_stack
  x86/doc: Remove obvious weirdnesses from the x86 MM layout documentation
  x86/mm/64: Improve the memory map documentation
  x86/ldt: Prevent LDT inheritance on exec
  x86/ldt: Rework locking
  arch, mm: Allow arch_dup_mmap() to fail
  x86/vsyscall/64: Warn and fail vsyscall emulation in NATIVE mode
  ...
2017-12-23 11:53:04 -08:00
Thomas Gleixner
c10e83f598 arch, mm: Allow arch_dup_mmap() to fail
In order to sanitize the LDT initialization on x86 arch_dup_mmap() must be
allowed to fail. Fix up all instances.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Andy Lutomirsky <luto@kernel.org>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Borislav Petkov <bpetkov@suse.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Laight <David.Laight@aculab.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Eduardo Valentin <eduval@amazon.com>
Cc: Greg KH <gregkh@linuxfoundation.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will.deacon@arm.com>
Cc: aliguori@amazon.com
Cc: dan.j.williams@intel.com
Cc: hughd@google.com
Cc: keescook@google.com
Cc: kirill.shutemov@linux.intel.com
Cc: linux-mm@kvack.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-12-22 20:13:01 +01:00
Aneesh Kumar K.V
5769beaf18 powerpc/mm: Add proper pte access check helper for other platforms
pte_access_premitted get called in get_user_pages_fast path. If we
have marked the pte PROT_NONE, we should not allow a read access on
the address. With the current implementation we are not checking the
READ and only check for WRITE. This is needed on archs like ppc64 that
implement PROT_NONE using _PAGE_USER access instead of _PAGE_PRESENT.
Also add pte_user check just to make sure we are not accessing kernel
mapping.

Even though there is code duplication, keeping the low level pte
accessors different for different platforms helps in code readability.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-12-22 22:28:40 +11:00
Aneesh Kumar K.V
f72a85e347 powerpc/mm/book3s/64: Add proper pte access check helper
pte_access_premitted get called in get_user_pages_fast path. If we
have marked the pte PROT_NONE, we should not allow a read access on
the address. With the current implementation we are not checking the
READ and only check for WRITE. This is needed on archs like ppc64 that
implement PROT_NONE using RWX access instead of _PAGE_PRESENT. Also
add pte_user check just to make sure we are not accessing kernel
mapping.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-12-22 22:28:35 +11:00
Ram Pai
273b493689 powerpc: Swizzle around 4K PTE bits to free up bit 5 and bit 6
We need PTE bits 3 ,4, 5, 6 and 57 to support protection-keys,
because these are the bits we want to consolidate on across all
configuration to support protection keys.

Bit 3,4,5 and 6 are currently used on 4K-pte kernels. But bit 9
and 10 are available. Hence we use the two available bits and
free up bit 5 and 6. We will still not be able to free up bit 3
and 4. In the absence of any other free bits, we will have to
stay satisfied with what we have :-(. This means we will not
be able to support 32 protection keys, but only 8. The bit
numbers are big-endian as defined in the ISA3.0

This patch does the following change to 4K PTE.

H_PAGE_F_SECOND (S) which occupied bit 4 moves to bit 7.
H_PAGE_F_GIX (G,I,X) which occupied bit 5, 6 and 7 also moves
to bit 8,9, 10 respectively.
H_PAGE_HASHPTE (H) which occupied bit 8 moves to bit 4.

Before the patch, the 4k PTE format was as follows

 0 1 2 3 4  5  6  7  8 9 10....................57.....63
 : : : : :  :  :  :  : : :                      :     :
 v v v v v  v  v  v  v v v                      v     v
,-,-,-,-,--,--,--,--,-,-,-,-,-,------------------,-,-,-,
|x|x|x|B|S |G |I |X |H| | |x|x|................| |x|x|x|
'_'_'_'_'__'__'__'__'_'_'_'_'_'________________'_'_'_'_'

After the patch, the 4k PTE format is as follows

 0 1 2 3 4  5  6  7  8 9 10....................57.....63
 : : : : :  :  :  :  : : :                      :     :
 v v v v v  v  v  v  v v v                      v     v
,-,-,-,-,--,--,--,--,-,-,-,-,-,------------------,-,-,-,
|x|x|x|B|H |  |  |S |G|I|X|x|x|................| |.|.|.|
'_'_'_'_'__'__'__'__'_'_'_'_'_'________________'_'_'_'_'

The patch has no code changes; just swizzles around bits.

Signed-off-by: Ram Pai <linuxram@us.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-12-20 18:57:24 +11:00
Ram Pai
7b84947cad powerpc: shifted-by-one hidx value
0xf is considered invalid hidx value. It indicates absence of a backing
HPTE. A PTE is initialized to 0xf either
a) when it is new it is newly allocated to hold 4k-backing-HPTE
	or
b) Any time it gets demoted to a 4k-backing-HPTE

This patch shifts the representation by one-modulo-0xf; i.e hidx 0 is
represented as 1, 1 as 2,... , and 0xf as 0. This convention lets us
initialize the secondary-part of the PTE to all zeroes. PTEs are anyway
zero'd when allocated. We do not have to zero them again; thus saving on
the initialization.

Signed-off-by: Ram Pai <linuxram@us.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-12-20 18:57:23 +11:00
Ram Pai
bf9a95f9a6 powerpc: Free up four 64K PTE bits in 64K backed HPTE pages
Rearrange 64K PTE bits to free up bits 3, 4, 5 and 6
in the 64K backed HPTE pages. This along with the earlier
patch will entirely free up the four bits from 64K PTE.
The bit numbers are big-endian as defined in the ISA3.0

This patch does the following change to 64K PTE backed
by 64K HPTE.

H_PAGE_F_SECOND (S) which occupied bit 4 moves to the
	second part of the pte to bit 60.
H_PAGE_F_GIX (G,I,X) which occupied bit 5, 6 and 7 also
	moves to the second part of the pte to bit 61,
 	62, 63, 64 respectively

since bit 7 is now freed up, we move H_PAGE_BUSY (B) from
bit 9 to bit 7.

The second part of the PTE will hold
(H_PAGE_F_SECOND|H_PAGE_F_GIX) at bit 60,61,62,63.
NOTE: None of the bits in the secondary PTE were not used
by 64k-HPTE backed PTE.

Before the patch, the 64K HPTE backed 64k PTE format was
as follows

 0 1 2 3 4  5  6  7  8 9 10...........................63
 : : : : :  :  :  :  : : :                            :
 v v v v v  v  v  v  v v v                            v

,-,-,-,-,--,--,--,--,-,-,-,-,-,------------------,-,-,-,
|x|x|x| |S |G |I |X |x|B| |x|x|................|x|x|x|x| <- primary pte
'_'_'_'_'__'__'__'__'_'_'_'_'_'________________'_'_'_'_'
| | | | |  |  |  |  | | | | |..................| | | | | <- secondary pte
'_'_'_'_'__'__'__'__'_'_'_'_'__________________'_'_'_'_'

After the patch, the 64k HPTE backed 64k PTE format is
as follows

 0 1 2 3 4  5  6  7  8 9 10...........................63
 : : : : :  :  :  :  : : :                            :
 v v v v v  v  v  v  v v v                            v

,-,-,-,-,--,--,--,--,-,-,-,-,-,------------------,-,-,-,
|x|x|x| |  |  |  |B |x| | |x|x|................|.|.|.|.| <- primary pte
'_'_'_'_'__'__'__'__'_'_'_'_'_'________________'_'_'_'_'
| | | | |  |  |  |  | | | | |..................|S|G|I|X| <- secondary pte
'_'_'_'_'__'__'__'__'_'_'_'_'__________________'_'_'_'_'

The above PTE changes is applicable to hugetlbpages aswell.

The patch does the following code changes:

a) moves the H_PAGE_F_SECOND and H_PAGE_F_GIX to 4k PTE
	header since it is no more needed b the 64k PTEs.
b) abstracts out __real_pte() and __rpte_to_hidx() so the
	caller need not know the bit location of the slot.
c) moves the slot bits to the secondary pte.

Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Ram Pai <linuxram@us.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-12-20 18:57:22 +11:00
Ram Pai
9d2edb1848 powerpc: Free up four 64K PTE bits in 4K backed HPTE pages
Rearrange 64K PTE bits to free up bits 3, 4, 5 and 6,
in the 4K backed HPTE pages.These bits continue to be used
for 64K backed HPTE pages in this patch, but will be freed
up in the next patch. The bit numbers are big-endian as
defined in the ISA3.0

The patch does the following change to the 4k HTPE backed
64K PTE's format.

H_PAGE_BUSY moves from bit 3 to bit 9 (B bit in the figure
		below)
V0 which occupied bit 4 is not used anymore.
V1 which occupied bit 5 is not used anymore.
V2 which occupied bit 6 is not used anymore.
V3 which occupied bit 7 is not used anymore.

Before the patch, the 4k backed 64k PTE format was as follows

 0 1 2 3 4  5  6  7  8 9 10...........................63
 : : : : :  :  :  :  : : :                            :
 v v v v v  v  v  v  v v v                            v

,-,-,-,-,--,--,--,--,-,-,-,-,-,------------------,-,-,-,
|x|x|x|B|V0|V1|V2|V3|x| | |x|x|................|x|x|x|x| <- primary pte
'_'_'_'_'__'__'__'__'_'_'_'_'_'________________'_'_'_'_'
|S|G|I|X|S |G |I |X |S|G|I|X|..................|S|G|I|X| <- secondary pte
'_'_'_'_'__'__'__'__'_'_'_'_'__________________'_'_'_'_'

After the patch, the 4k backed 64k PTE format is as follows

 0 1 2 3 4  5  6  7  8 9 10...........................63
 : : : : :  :  :  :  : : :                            :
 v v v v v  v  v  v  v v v                            v

,-,-,-,-,--,--,--,--,-,-,-,-,-,------------------,-,-,-,
|x|x|x| |  |  |  |  |x|B| |x|x|................|.|.|.|.| <- primary pte
'_'_'_'_'__'__'__'__'_'_'_'_'_'________________'_'_'_'_'
|S|G|I|X|S |G |I |X |S|G|I|X|..................|S|G|I|X| <- secondary pte
'_'_'_'_'__'__'__'__'_'_'_'_'__________________'_'_'_'_'

the four bits S,G,I,X (one quadruplet per 4k HPTE) that
cache the hash-bucket slot value, is initialized to
1,1,1,1 indicating -- an invalid slot. If a HPTE gets
cached in a 1111 slot(i.e 7th slot of secondary hash
bucket), it is released immediately. In other words,
even though 1111 is a valid slot value in the hash
bucket, we consider it invalid and release the slot and
the HPTE. This gives us the opportunity to determine
the validity of S,G,I,X bits based on its contents and
not on any of the bits V0,V1,V2 or V3 in the primary PTE

When we release a HPTE cached in the 1111 slot
we also release a legitimate slot in the primary
hash bucket and unmap its corresponding HPTE. This
is to ensure that we do get a HPTE cached in a slot
of the primary hash bucket, the next time we retry.

Though treating 1111 slot as invalid, reduces the
number of available slots in the hash bucket and may
have an effect on the performance, the probabilty of
hitting a 1111 slot is extermely low.

Compared to the current scheme, the above scheme
reduces the number of false hash table updates
significantly and has the added advantage of releasing
four valuable PTE bits for other purpose.

NOTE:even though bits 3, 4, 5, 6, 7 are not used when
the 64K PTE is backed by 4k HPTE, they continue to be
used if the PTE gets backed by 64k HPTE. The next
patch will decouple that aswell, and truely release the
bits.

This idea was jointly developed by Paul Mackerras,
Aneesh, Michael Ellermen and myself.

4K PTE format remains unchanged currently.

The patch does the following code changes
a) PTE flags are split between 64k and 4k header files.
b) __hash_page_4K() is reimplemented to reflect the
 above logic.

Acked-by: Balbir Singh <bsingharora@gmail.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Ram Pai <linuxram@us.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-12-20 18:57:20 +11:00
Ram Pai
318995b4f5 powerpc: introduce pte_get_hash_gslot() helper
Introduce pte_get_hash_gslot()() which returns the global slot number of
the HPTE in the global hash table.

This function will come in handy as we work towards re-arranging the PTE
bits in the later patches.

Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Ram Pai <linuxram@us.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-12-20 18:57:19 +11:00
Ram Pai
59aa31fd6f powerpc: introduce pte_set_hidx() helper
Introduce pte_set_hidx().It sets the (H_PAGE_F_SECOND|H_PAGE_F_GIX) bits
at the appropriate location in the PTE of 4K PTE. For 64K PTE, it sets
the bits in the second part of the PTE. Though the implementation for
the former just needs the slot parameter, it does take some additional
parameters to keep the prototype consistent.

This function will be handy as we work towards re-arranging the bits in
the subsequent patches.

Acked-by: Balbir Singh <bsingharora@gmail.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Ram Pai <linuxram@us.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-12-20 18:57:19 +11:00
Bryant G. Ly
988fc3ba56 powerpc/pci: Separate SR-IOV Calls
SR-IOV can now be enabled for the powernv platform and pseries
platform. Therefore move the appropriate calls to machine dependent
code instead of relying on definition at compile time.

Signed-off-by: Bryant G. Ly <bryantly@linux.vnet.ibm.com>
Signed-off-by: Juan J. Alvarez <jjalvare@us.ibm.com>
Acked-by: Russell Currey <ruscur@russell.cc>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-12-11 13:03:35 +11:00
Josh Poimboeuf
b9eab08d01 powerpc/modules: Don't try to restore r2 after a sibling call
When attempting to load a livepatch module, I got the following error:

  module_64: patch_module: Expect noop after relocate, got 3c820000

The error was triggered by the following code in
unregister_netdevice_queue():

  14c:   00 00 00 48     b       14c <unregister_netdevice_queue+0x14c>
                         14c: R_PPC64_REL24      net_set_todo
  150:   00 00 82 3c     addis   r4,r2,0

GCC didn't insert a nop after the branch to net_set_todo() because it's
a sibling call, so it never returns.  The nop isn't needed after the
branch in that case.

Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Acked-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Reviewed-and-tested-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-12-11 13:03:29 +11:00
Linus Torvalds
e9ef1fe312 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Pull networking fixes from David Miller:

 1) CAN fixes from Martin Kelly (cancel URBs properly in all the CAN usb
    drivers).

 2) Revert returning -EEXIST from __dev_alloc_name() as this propagates
    to userspace and broke some apps. From Johannes Berg.

 3) Fix conn memory leaks and crashes in TIPC, from Jon Malloc and Cong
    Wang.

 4) Gianfar MAC can't do EEE so don't advertise it by default, from
    Claudiu Manoil.

 5) Relax strict netlink attribute validation, but emit a warning. From
    David Ahern.

 6) Fix regression in checksum offload of thunderx driver, from Florian
    Westphal.

 7) Fix UAPI bpf issues on s390, from Hendrik Brueckner.

 8) New card support in iwlwifi, from Ihab Zhaika.

 9) BBR congestion control bug fixes from Neal Cardwell.

10) Fix port stats in nfp driver, from Pieter Jansen van Vuuren.

11) Fix leaks in qualcomm rmnet, from Subash Abhinov Kasiviswanathan.

12) Fix DMA API handling in sh_eth driver, from Thomas Petazzoni.

13) Fix spurious netpoll warnings in bnxt_en, from Calvin Owens.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (67 commits)
  net: mvpp2: fix the RSS table entry offset
  tcp: evaluate packet losses upon RTT change
  tcp: fix off-by-one bug in RACK
  tcp: always evaluate losses in RACK upon undo
  tcp: correctly test congestion state in RACK
  bnxt_en: Fix sources of spurious netpoll warnings
  tcp_bbr: reset long-term bandwidth sampling on loss recovery undo
  tcp_bbr: reset full pipe detection on loss recovery undo
  tcp_bbr: record "full bw reached" decision in new full_bw_reached bit
  sfc: pass valid pointers from efx_enqueue_unwind
  gianfar: Disable EEE autoneg by default
  tcp: invalidate rate samples during SACK reneging
  can: peak/pcie_fd: fix potential bug in restarting tx queue
  can: usb_8dev: cancel urb on -EPIPE and -EPROTO
  can: kvaser_usb: cancel urb on -EPIPE and -EPROTO
  can: esd_usb2: cancel urb on -EPIPE and -EPROTO
  can: ems_usb: cancel urb on -EPIPE and -EPROTO
  can: mcba_usb: cancel urb on -EPROTO
  usbnet: fix alignment for frames with no ethernet header
  tcp: use current time in tcp_rcv_space_adjust()
  ...
2017-12-08 13:32:44 -08:00
Hendrik Brueckner
c895f6f703 bpf: correct broken uapi for BPF_PROG_TYPE_PERF_EVENT program type
Commit 0515e5999a ("bpf: introduce BPF_PROG_TYPE_PERF_EVENT
program type") introduced the bpf_perf_event_data structure which
exports the pt_regs structure.  This is OK for multiple architectures
but fail for s390 and arm64 which do not export pt_regs.  Programs
using them, for example, the bpf selftest fail to compile on these
architectures.

For s390, exporting the pt_regs is not an option because s390 wants
to allow changes to it.  For arm64, there is a user_pt_regs structure
that covers parts of the pt_regs structure for use by user space.

To solve the broken uapi for s390 and arm64, introduce an abstract
type for pt_regs and add an asm/bpf_perf_event.h file that concretes
the type.  An asm-generic header file covers the architectures that
export pt_regs today.

The arch-specific enablement for s390 and arm64 follows in separate
commits.

Reported-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
Fixes: 0515e5999a ("bpf: introduce BPF_PROG_TYPE_PERF_EVENT program type")
Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Reviewed-and-tested-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-05 15:02:40 +01:00
David Gibson
ab9dbf771f Revert "powerpc: Do not call ppc_md.panic in fadump panic notifier"
This reverts commit a3b2cb30f2.

That commit tried to fix problems with panic on powerpc in certain
circumstances, where some output from the generic panic code was being
dropped.

Unfortunately, it breaks things worse in other circumstances. In
particular when running a PAPR guest, it will now attempt to reboot
instead of informing the hypervisor (KVM or PowerVM) that the guest
has crashed. The crash notification is important to some
virtualization management layers.

Revert it for now until we can come up with a better solution.

Fixes: a3b2cb30f2 ("powerpc: Do not call ppc_md.panic in fadump panic notifier")
Cc: stable@vger.kernel.org # v4.14+
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
[mpe: Tweak change log a bit]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-12-05 23:21:46 +11:00
Linus Torvalds
9e0600f5cf * x86 bugfixes: APIC, nested virtualization, IOAPIC
* PPC bugfix: HPT guests on a POWER9 radix host
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQEcBAABAgAGBQJaICi1AAoJEL/70l94x66DjvEIAIML/e9YX1YrJZi0rsB9cbm0
 Le3o5b3wKxPrlZdnpOZQ2mVWubUQdiHMPGX6BkpgyiJWUchnbj5ql1gUf5S0i3jk
 TOk6nae6DU94xBuboeqZJlmx2VfPY/fqzLWsX3HFHpnzRl4XvXL5o7cWguIxVcVO
 yU6bPgbAXyXSBennLWZxC3aQ2Ojikr3uxZQpUZTAPOW5hFINpCKCpqJBMxsb67wq
 rwI0cJhRl92mHpbe8qeNJhavqY5eviy9iPUaZrOW9P4yw1uqjTAjgsUc1ydiaZSV
 rOHeKBOgVfY/KBaNJKyKySfuL1MJ+DLcQqm9RlGpKNpFIeB0vvSf0gtmmqIAXIk=
 =kh2y
 -----END PGP SIGNATURE-----

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

Pull KVM fixes from Paolo Bonzini:

 - x86 bugfixes: APIC, nested virtualization, IOAPIC

 - PPC bugfix: HPT guests on a POWER9 radix host

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (26 commits)
  KVM: Let KVM_SET_SIGNAL_MASK work as advertised
  KVM: VMX: Fix vmx->nested freeing when no SMI handler
  KVM: VMX: Fix rflags cache during vCPU reset
  KVM: X86: Fix softlockup when get the current kvmclock
  KVM: lapic: Fixup LDR on load in x2apic
  KVM: lapic: Split out x2apic ldr calculation
  KVM: PPC: Book3S HV: Fix migration and HPT resizing of HPT guests on radix hosts
  KVM: vmx: use X86_CR4_UMIP and X86_FEATURE_UMIP
  KVM: x86: Fix CPUID function for word 6 (80000001_ECX)
  KVM: nVMX: Fix vmx_check_nested_events() return value in case an event was reinjected to L2
  KVM: x86: ioapic: Preserve read-only values in the redirection table
  KVM: x86: ioapic: Clear Remote IRR when entry is switched to edge-triggered
  KVM: x86: ioapic: Remove redundant check for Remote IRR in ioapic_set_irq
  KVM: x86: ioapic: Don't fire level irq when Remote IRR set
  KVM: x86: ioapic: Fix level-triggered EOI and IOAPIC reconfigure race
  KVM: x86: inject exceptions produced by x86_decode_insn
  KVM: x86: Allow suppressing prints on RDMSR/WRMSR of unhandled MSRs
  KVM: x86: fix em_fxstor() sleeping while in atomic
  KVM: nVMX: Fix mmu context after VMLAUNCH/VMRESUME failure
  KVM: nVMX: Validate the IA32_BNDCFGS on nested VM-entry
  ...
2017-11-30 08:15:19 -08:00
Dan Williams
e4e40e0263 mm: switch to 'define pmd_write' instead of __HAVE_ARCH_PMD_WRITE
In response to compile breakage introduced by a series that added the
pud_write helper to x86, Stephen notes:

    did you consider using the other paradigm:

    In arch include files:
    #define pud_write       pud_write
    static inline int pud_write(pud_t pud)
     .....

    Then in include/asm-generic/pgtable.h:

    #ifndef pud_write
    tatic inline int pud_write(pud_t pud)
    {
            ....
    }
    #endif

    If you had, then the powerpc code would have worked ... ;-) and many
    of the other interfaces in include/asm-generic/pgtable.h are
    protected that way ...

Given that some architecture already define pmd_write() as a macro, it's
a net reduction to drop the definition of __HAVE_ARCH_PMD_WRITE.

Link: http://lkml.kernel.org/r/151129126721.37405.13339850900081557813.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Suggested-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: Oliver OHalloran <oliveroh@au1.ibm.com>
Cc: Chris Metcalf <cmetcalf@mellanox.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-29 18:40:42 -08:00
Linus Torvalds
83ada03196 powerpc fixes for 4.15 #2
A small batch of fixes, about 50% tagged for stable and the rest for recently
 merged code.
 
 There's one more fix for the >128T handling on hash. Once a process had
 requested a single mmap above 128T we would then always search above 128T. The
 correct behaviour is to consider the hint address in isolation for each mmap
 request.
 
 Then a couple of fixes for the IMC PMU, a missing EXPORT_SYMBOL in VAS, a fix
 for STRICT_KERNEL_RWX on 32-bit, and a fix to correctly identify P9 DD2.1 but in
 code that is currently not used by default.
 
 Thanks to:
   Aneesh Kumar K.V, Christophe Leroy, Madhavan Srinivasan, Sukadev Bhattiprolu.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJaF/VqAAoJEFHr6jzI4aWA994P/3NNXkSASJHjLrIlQAKXtmx9
 lrv1v+6MbPWhyB8Q8LVnnC3Ab2LTHnkccjq2Jw0bP0RQ86HF4mH7Sb7N5Wj0cG+M
 5NioikvGE057ncLfxVhesOK0C9Lhc7Zb+zphXZliYP76IGxwbxorJRepeZctVkyO
 KPMv4eaImdblVn71aoQQSlepON4+/rtiW2yo5u98uCqR+Ttds4J1fiDZ4TNrBYRP
 Ilh6DmA//CWvN+KsGT+brRd/PjEkxQKHyS8px3lxRl4cwCJucXPCik/Gn9t6OiMw
 3S6y1Mu8nrh4z+YepKv6APvl2DEwwXn8w9f85kn+QiE9Qp3Z/wckW9/4LT5FeuKE
 L8E3dKq2NzJ9oDs/20sVbBvVR7CUvBoyWytsXVkmmlC6sVReTrYAJ1UP9HnNvcF6
 be4zYUKusU83uG6saGgchRrPUrD31XKXw8Piv9EoWo1Uz7VgWCkxidclRNocgeDO
 k5VxYnRd9jPsv2pCzXH2YmuQAypGUh12IPTxEOnSt5uzXSXcamZJBLKp5fAJ/9dl
 jD6GlRQMX8JpNRJzxOBLly3CmwQBw2ekOuPLXI+M/ilks66AGK8lp4bg5cWwDGNe
 puzmRJ2mO3dnFlVUHBQ5LyX8ne4yunin1JZB1YQ4xm8yxZbGO2AdypEWMSkPKNPN
 fkrGPlwQ1JwFheMbHHLj
 =gv70
 -----END PGP SIGNATURE-----

Merge tag 'powerpc-4.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux

Pull powerpc fixes from Michael Ellerman:
 "A small batch of fixes, about 50% tagged for stable and the rest for
  recently merged code.

  There's one more fix for the >128T handling on hash. Once a process
  had requested a single mmap above 128T we would then always search
  above 128T. The correct behaviour is to consider the hint address in
  isolation for each mmap request.

  Then a couple of fixes for the IMC PMU, a missing EXPORT_SYMBOL in
  VAS, a fix for STRICT_KERNEL_RWX on 32-bit, and a fix to correctly
  identify P9 DD2.1 but in code that is currently not used by default.

  Thanks to: Aneesh Kumar K.V, Christophe Leroy, Madhavan Srinivasan,
  Sukadev Bhattiprolu"

* tag 'powerpc-4.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/64s: Fix Power9 DD2.1 logic in DT CPU features
  powerpc/perf: Fix IMC_MAX_PMU macro
  powerpc/perf: Fix pmu_count to count only nest imc pmus
  powerpc: Fix boot on BOOK3S_32 with CONFIG_STRICT_KERNEL_RWX
  powerpc/perf/imc: Use cpu_to_node() not topology_physical_package_id()
  powerpc/vas: Export chip_to_vas_id()
  powerpc/64s/slice: Use addr limit when computing slice mask
2017-11-24 19:40:12 -10:00
Paul Mackerras
cda2eaa359 KVM: PPC: Book3S HV: Avoid shifts by negative amounts
The kvmppc_hpte_page_shifts function decodes the actual and base page
sizes for a HPTE, returning -1 if it doesn't recognize the page size
encoding.  This then gets used as a shift amount in various places,
which is undefined behaviour.  This was reported by Coverity.

In fact this should never occur, since we should only get HPTEs in the
HPT which have a recognized page size encoding.  The only place where
this might not be true is in the call to kvmppc_actual_pgsz() near the
beginning of kvmppc_do_h_enter(), where we are validating the HPTE
value passed in from the guest.

So to fix this and eliminate the undefined behaviour, we make
kvmppc_hpte_page_shifts return 0 for unrecognized page size encodings,
and make kvmppc_actual_pgsz() detect that case and return 0 for the
page size, which will then cause kvmppc_do_h_enter() to return an
error and refuse to insert any HPTE with an unrecognized page size
encoding.

To ensure that we don't get undefined behaviour in compute_tlbie_rb(),
we take the 4k page size path for any unrecognized page size encoding.
This should never be hit in practice because it is only used on HPTE
values which have previously been checked for having a recognized
page size encoding.

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2017-11-23 14:23:00 +11:00
Paul Mackerras
ded13fc11b KVM: PPC: Book3S HV: Fix migration and HPT resizing of HPT guests on radix hosts
This fixes two errors that prevent a guest using the HPT MMU from
successfully migrating to a POWER9 host in radix MMU mode, or resizing
its HPT when running on a radix host.

The first bug was that commit 8dc6cca556 ("KVM: PPC: Book3S HV:
Don't rely on host's page size information", 2017-09-11) missed two
uses of hpte_base_page_size(), one in the HPT rehashing code and
one in kvm_htab_write() (which is used on the destination side in
migrating a HPT guest).  Instead we use kvmppc_hpte_base_page_shift().
Having the shift count means that we can use left and right shifts
instead of multiplication and division in a few places.

Along the way, this adds a check in kvm_htab_write() to ensure that the
page size encoding in the incoming HPTEs is recognized, and if not
return an EINVAL error to userspace.

The second bug was that kvm_htab_write was performing some but not all
of the functions of kvmhv_setup_mmu(), resulting in the destination VM
being left in radix mode as far as the hardware is concerned.  The
simplest fix for now is make kvm_htab_write() call
kvmppc_setup_partition_table() like kvmppc_hv_setup_htab_rma() does.
In future it would be better to refactor the code more extensively
to remove the duplication.

Fixes: 8dc6cca556 ("KVM: PPC: Book3S HV: Don't rely on host's page size information")
Fixes: 7a84084c60 ("KVM: PPC: Book3S HV: Set partition table rather than SDR1 on POWER9")
Reported-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Tested-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2017-11-23 14:17:54 +11:00
Madhavan Srinivasan
73ce9aec65 powerpc/perf: Fix IMC_MAX_PMU macro
IMC_MAX_PMU is used for static storage (per_nest_pmu_arr) which holds
nest pmu information. Current value for the macro is 32 based on
the initial number of nest pmu units supported by the nest microcode.
But going forward, microcode could support more nest units. Instead
of static storage, patch to fix the code to dynamically allocate an
array based on the number of nest imc units found in the device tree.

Fixes:8f95faaac56c1 ('powerpc/powernv: Detect and create IMC device')
Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-11-22 23:04:23 +11:00
Linus Torvalds
5a3e0b196b File locking related changes for v4.15
-----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJaDuoWAAoJEAAOaEEZVoIVXEQP/jQYoU9hgvEj8j3ZIgi56SDJ
 pR45w2zcJz2/uU43DEKyShyLgsuoBbJQ3l/gGBH/tl+xGm9NzB0gatoEu9GmKNYz
 /IN6/vUFnoIAUyD+iMZbpmsYKIkz0z2YJo261IfspAwIft/cvHJnYYGQrP9YXg9F
 c7bdDuANTKocdQigc4BQyOe3OfIBGfTwJhuakO+1yuZmGOVNyxEcdYbMM8FiTfc8
 +62kvQQ3t7WMqSbM8M0QdGcYQjG0EwcVAuV7COurLJIva7hUkVel32MVUjoFcf28
 BnRu2ztFJCubm1HA85twlJDtpeXbcMqrUl/CcwRMpwDaePd5GVB1h5iKqbZ51BZ1
 fWT2STmt+8hY2B5eiXoYEaG3B7ZRr+r0oroxqOxpiZ/m4AVeouF+gPGv+NV5zgvD
 NGWC0MdklIJ4xaC99NEeP6kBhz0M74VKymFCTeHkVg9m4TqDepNvitKed0qagw19
 uw8seei7TOTm4o117+l55NHmyfTHXFO4U0WLTJyeZcoEnUs0rOcHeqyy0RwCBMrK
 W2fJtdBLFr+tBIIrID4TnPhhYtSvIPjz+FpiRDobqhgvMva/PIvLGTWK4unrgIjG
 ZQ7YGnwWda8GjqKhgZacn/BSXyJzOAF9hJp0mz2ORaOxaMarEV55duiZufCvGuZw
 uUQWRCKuQX7Oi05i9jXp
 =fCeF
 -----END PGP SIGNATURE-----

Merge tag 'locks-v4.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linux

Pull file locking update from Jeff Layton:
 "A couple of fixes for a patch that went into v4.14, and the bug report
  just came in a few days ago.. It passes my (minimal) testing, and has
  been in linux-next for a few days now.

  I also would like to get my address changed in MAINTAINERS to clear
  that hurdle"

* tag 'locks-v4.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linux:
  fcntl: don't cap l_start and l_end values for F_GETLK64 in compat syscall
  fcntl: don't leak fd reference when fixup_compat_flock fails
  MAINTAINERS: s/jlayton@poochiereds.net/jlayton@kernel.org/
2017-11-17 13:21:58 -08:00
Linus Torvalds
974aa5630b First batch of KVM changes for 4.15
Common:
  - Python 3 support in kvm_stat
 
  - Accounting of slabs to kmemcg
 
 ARM:
  - Optimized arch timer handling for KVM/ARM
 
  - Improvements to the VGIC ITS code and introduction of an ITS reset
    ioctl
 
  - Unification of the 32-bit fault injection logic
 
  - More exact external abort matching logic
 
 PPC:
  - Support for running hashed page table (HPT) MMU mode on a host that
    is using the radix MMU mode;  single threaded mode on POWER 9 is
    added as a pre-requisite
 
  - Resolution of merge conflicts with the last second 4.14 HPT fixes
 
  - Fixes and cleanups
 
 s390:
  - Some initial preparation patches for exitless interrupts and crypto
 
  - New capability for AIS migration
 
  - Fixes
 
 x86:
  - Improved emulation of LAPIC timer mode changes, MCi_STATUS MSRs, and
    after-reset state
 
  - Refined dependencies for VMX features
 
  - Fixes for nested SMI injection
 
  - A lot of cleanups
 -----BEGIN PGP SIGNATURE-----
 
 iQEcBAABCAAGBQJaDayXAAoJEED/6hsPKofo/3UH/3HvlcHt+ADTkCU1/iiKAs+i
 0zngIOXIxgHDnV0ww6bV+Znww0BzTYgKCAXX76z603jdpDwG/pzQQcbLDF5ZoJnD
 sQtF10gZinWaRsHlfbLqjrHGL2pGDHO1UKBKLJ0bAIyORPZBxs7i+VmrY/blnr9c
 0wsybJ8RbvwAxjsDL5jeX/z4NehPupmKUc4Lf0eZdSHwVOf9sjn+MP6jJ0r2JcIb
 D+zddPBiLStzN97t4gZpQsrlj3LKrDS+6hY+1TjSvlh+yHKFVFh58VhLm4DuDeb5
 bYOAlWJ/gAWEzfvr5Ld+Nd7SqWWn/14logPkQ4gcU4BI/neAOzk4c6hJfCHl1nk=
 =593n
 -----END PGP SIGNATURE-----

Merge tag 'kvm-4.15-1' of git://git.kernel.org/pub/scm/virt/kvm/kvm

Pull KVM updates from Radim Krčmář:
 "First batch of KVM changes for 4.15

  Common:
   - Python 3 support in kvm_stat
   - Accounting of slabs to kmemcg

  ARM:
   - Optimized arch timer handling for KVM/ARM
   - Improvements to the VGIC ITS code and introduction of an ITS reset
     ioctl
   - Unification of the 32-bit fault injection logic
   - More exact external abort matching logic

  PPC:
   - Support for running hashed page table (HPT) MMU mode on a host that
     is using the radix MMU mode; single threaded mode on POWER 9 is
     added as a pre-requisite
   - Resolution of merge conflicts with the last second 4.14 HPT fixes
   - Fixes and cleanups

  s390:
   - Some initial preparation patches for exitless interrupts and crypto
   - New capability for AIS migration
   - Fixes

  x86:
   - Improved emulation of LAPIC timer mode changes, MCi_STATUS MSRs,
     and after-reset state
   - Refined dependencies for VMX features
   - Fixes for nested SMI injection
   - A lot of cleanups"

* tag 'kvm-4.15-1' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (89 commits)
  KVM: s390: provide a capability for AIS state migration
  KVM: s390: clear_io_irq() requests are not expected for adapter interrupts
  KVM: s390: abstract conversion between isc and enum irq_types
  KVM: s390: vsie: use common code functions for pinning
  KVM: s390: SIE considerations for AP Queue virtualization
  KVM: s390: document memory ordering for kvm_s390_vcpu_wakeup
  KVM: PPC: Book3S HV: Cosmetic post-merge cleanups
  KVM: arm/arm64: fix the incompatible matching for external abort
  KVM: arm/arm64: Unify 32bit fault injection
  KVM: arm/arm64: vgic-its: Implement KVM_DEV_ARM_ITS_CTRL_RESET
  KVM: arm/arm64: Document KVM_DEV_ARM_ITS_CTRL_RESET
  KVM: arm/arm64: vgic-its: Free caches when GITS_BASER Valid bit is cleared
  KVM: arm/arm64: vgic-its: New helper functions to free the caches
  KVM: arm/arm64: vgic-its: Remove kvm_its_unmap_device
  arm/arm64: KVM: Load the timer state when enabling the timer
  KVM: arm/arm64: Rework kvm_timer_should_fire
  KVM: arm/arm64: Get rid of kvm_timer_flush_hwstate
  KVM: arm/arm64: Avoid phys timer emulation in vcpu entry/exit
  KVM: arm/arm64: Move phys_timer_emulate function
  KVM: arm/arm64: Use kvm_arm_timer_set/get_reg for guest register traps
  ...
2017-11-16 13:00:24 -08:00
Linus Torvalds
5b0e2cb020 powerpc updates for 4.15
Non-highlights:
 
  - Five fixes for the >128T address space handling, both to fix bugs in our
    implementation and to bring the semantics exactly into line with x86.
 
 Highlights:
 
  - Support for a new OPAL call on bare metal machines which gives us a true NMI
    (ie. is not masked by MSR[EE]=0) for debugging etc.
 
  - Support for Power9 DD2 in the CXL driver.
 
  - Improvements to machine check handling so that uncorrectable errors can be
    reported into the generic memory_failure() machinery.
 
  - Some fixes and improvements for VPHN, which is used under PowerVM to notify
    the Linux partition of topology changes.
 
  - Plumbing to enable TM (transactional memory) without suspend on some Power9
    processors (PPC_FEATURE2_HTM_NO_SUSPEND).
 
  - Support for emulating vector loads form cache-inhibited memory, on some
    Power9 revisions.
 
  - Disable the fast-endian switch "syscall" by default (behind a CONFIG), we
    believe it has never had any users.
 
  - A major rework of the API drivers use when initiating and waiting for long
    running operations performed by OPAL firmware, and changes to the
    powernv_flash driver to use the new API.
 
  - Several fixes for the handling of FP/VMX/VSX while processes are using
    transactional memory.
 
  - Optimisations of TLB range flushes when using the radix MMU on Power9.
 
  - Improvements to the VAS facility used to access coprocessors on Power9, and
    related improvements to the way the NX crypto driver handles requests.
 
  - Implementation of PMEM_API and UACCESS_FLUSHCACHE for 64-bit.
 
 Thanks to:
   Alexey Kardashevskiy, Alistair Popple, Allen Pais, Andrew Donnellan, Aneesh
   Kumar K.V, Arnd Bergmann, Balbir Singh, Benjamin Herrenschmidt, Breno Leitao,
   Christophe Leroy, Christophe Lombard, Cyril Bur, Frederic Barrat, Gautham R.
   Shenoy, Geert Uytterhoeven, Guilherme G. Piccoli, Gustavo Romero, Haren
   Myneni, Joel Stanley, Kamalesh Babulal, Kautuk Consul, Markus Elfring, Masami
   Hiramatsu, Michael Bringmann, Michael Neuling, Michal Suchanek, Naveen N. Rao,
   Nicholas Piggin, Oliver O'Halloran, Paul Mackerras, Pedro Miraglia Franco de
   Carvalho, Philippe Bergheaud, Sandipan Das, Seth Forshee, Shriya, Stephen
   Rothwell, Stewart Smith, Sukadev Bhattiprolu, Tyrel Datwyler, Vaibhav Jain,
   Vaidyanathan Srinivasan, William A. Kennington III.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJaDXGuAAoJEFHr6jzI4aWAEqwP/0TA35KFAK6wqfkCf67z4q+O
 I+5piI4eDV4jdCakfoIN1JfjhQRULNePSoCHTccan30mu/bm30p69xtOLL2/h5xH
 Mhz/eDBAOo0lrT20nyZfYMW3FnM66wnNf++qJ0O+8L052r4WOB02J0k1uM1ST01D
 5Lb5mUoxRLRzCgKRYAYWJifn+IFPUB9NMsvMTym94krAFlIjIzMEQXhDoln+jJMr
 QmY5f1BTA/fLfXobn0zwoc/C1oa2PUtxd+rxbwGrLoZ6G843mMqUi90SMr5ybhXp
 RzepnBTj4by3vOsnk/X1mANyaZfLsunp75FwnjHdPzKrAS/TuPp8D/iSxxE/PzEq
 cLwJFBnFXSgQMefDErXxhHSDz2dAg5r14rsTpDcq2Ko8TPV4rPsuSfmbd9Txekb0
 yWHsjoJUBBMl2QcWqIHl+AlV8j1RklF6solcTBcGnH1CZJMfa05VKXV7xGEvOHa0
 RJ+/xPyR9KjoB/SUp++9Vmx/M6SwQYFOJlr3Zpg9LNtR8WpoPYu1E6eO+u1Hhzny
 eJqaNstH+i+VdY9eqszkAsEBh8o9M/+b+7Wx7TetvU+v368CbXtgFYs9qy2oZjPF
 t9sY/BHaHZ8eZ7I00an77a0fVV5B1PVASUtIz5CqkwGpMvX6Z6W2K/XUUFI61kuu
 E06HS6Ht8UPJAzrAPUMl
 =Rq81
 -----END PGP SIGNATURE-----

Merge tag 'powerpc-4.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux

Pull powerpc updates from Michael Ellerman:
 "A bit of a small release, I suspect in part due to me travelling for
  KS. But my backlog of patches to review is smaller than usual, so I
  think in part folks just didn't send as much this cycle.

  Non-highlights:

   - Five fixes for the >128T address space handling, both to fix bugs
     in our implementation and to bring the semantics exactly into line
     with x86.

  Highlights:

   - Support for a new OPAL call on bare metal machines which gives us a
     true NMI (ie. is not masked by MSR[EE]=0) for debugging etc.

   - Support for Power9 DD2 in the CXL driver.

   - Improvements to machine check handling so that uncorrectable errors
     can be reported into the generic memory_failure() machinery.

   - Some fixes and improvements for VPHN, which is used under PowerVM
     to notify the Linux partition of topology changes.

   - Plumbing to enable TM (transactional memory) without suspend on
     some Power9 processors (PPC_FEATURE2_HTM_NO_SUSPEND).

   - Support for emulating vector loads form cache-inhibited memory, on
     some Power9 revisions.

   - Disable the fast-endian switch "syscall" by default (behind a
     CONFIG), we believe it has never had any users.

   - A major rework of the API drivers use when initiating and waiting
     for long running operations performed by OPAL firmware, and changes
     to the powernv_flash driver to use the new API.

   - Several fixes for the handling of FP/VMX/VSX while processes are
     using transactional memory.

   - Optimisations of TLB range flushes when using the radix MMU on
     Power9.

   - Improvements to the VAS facility used to access coprocessors on
     Power9, and related improvements to the way the NX crypto driver
     handles requests.

   - Implementation of PMEM_API and UACCESS_FLUSHCACHE for 64-bit.

  Thanks to: Alexey Kardashevskiy, Alistair Popple, Allen Pais, Andrew
  Donnellan, Aneesh Kumar K.V, Arnd Bergmann, Balbir Singh, Benjamin
  Herrenschmidt, Breno Leitao, Christophe Leroy, Christophe Lombard,
  Cyril Bur, Frederic Barrat, Gautham R. Shenoy, Geert Uytterhoeven,
  Guilherme G. Piccoli, Gustavo Romero, Haren Myneni, Joel Stanley,
  Kamalesh Babulal, Kautuk Consul, Markus Elfring, Masami Hiramatsu,
  Michael Bringmann, Michael Neuling, Michal Suchanek, Naveen N. Rao,
  Nicholas Piggin, Oliver O'Halloran, Paul Mackerras, Pedro Miraglia
  Franco de Carvalho, Philippe Bergheaud, Sandipan Das, Seth Forshee,
  Shriya, Stephen Rothwell, Stewart Smith, Sukadev Bhattiprolu, Tyrel
  Datwyler, Vaibhav Jain, Vaidyanathan Srinivasan, and William A.
  Kennington III"

* tag 'powerpc-4.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (151 commits)
  powerpc/64s: Fix Power9 DD2.0 workarounds by adding DD2.1 feature
  powerpc/64s: Fix masking of SRR1 bits on instruction fault
  powerpc/64s: mm_context.addr_limit is only used on hash
  powerpc/64s/radix: Fix 128TB-512TB virtual address boundary case allocation
  powerpc/64s/hash: Allow MAP_FIXED allocations to cross 128TB boundary
  powerpc/64s/hash: Fix fork() with 512TB process address space
  powerpc/64s/hash: Fix 128TB-512TB virtual address boundary case allocation
  powerpc/64s/hash: Fix 512T hint detection to use >= 128T
  powerpc: Fix DABR match on hash based systems
  powerpc/signal: Properly handle return value from uprobe_deny_signal()
  powerpc/fadump: use kstrtoint to handle sysfs store
  powerpc/lib: Implement UACCESS_FLUSHCACHE API
  powerpc/lib: Implement PMEM API
  powerpc/powernv/npu: Don't explicitly flush nmmu tlb
  powerpc/powernv/npu: Use flush_all_mm() instead of flush_tlb_mm()
  powerpc/powernv/idle: Round up latency and residency values
  powerpc/kprobes: refactor kprobe_lookup_name for safer string operations
  powerpc/kprobes: Blacklist emulate_update_regs() from kprobes
  powerpc/kprobes: Do not disable interrupts for optprobes and kprobes_on_ftrace
  powerpc/kprobes: Disable preemption before invoking probe handler for optprobes
  ...
2017-11-16 12:47:46 -08:00
Linus Torvalds
7c225c69f8 Merge branch 'akpm' (patches from Andrew)
Merge updates from Andrew Morton:

 - a few misc bits

 - ocfs2 updates

 - almost all of MM

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (131 commits)
  memory hotplug: fix comments when adding section
  mm: make alloc_node_mem_map a void call if we don't have CONFIG_FLAT_NODE_MEM_MAP
  mm: simplify nodemask printing
  mm,oom_reaper: remove pointless kthread_run() error check
  mm/page_ext.c: check if page_ext is not prepared
  writeback: remove unused function parameter
  mm: do not rely on preempt_count in print_vma_addr
  mm, sparse: do not swamp log with huge vmemmap allocation failures
  mm/hmm: remove redundant variable align_end
  mm/list_lru.c: mark expected switch fall-through
  mm/shmem.c: mark expected switch fall-through
  mm/page_alloc.c: broken deferred calculation
  mm: don't warn about allocations which stall for too long
  fs: fuse: account fuse_inode slab memory as reclaimable
  mm, page_alloc: fix potential false positive in __zone_watermark_ok
  mm: mlock: remove lru_add_drain_all()
  mm, sysctl: make NUMA stats configurable
  shmem: convert shmem_init_inodecache() to void
  Unify migrate_pages and move_pages access checks
  mm, pagevec: rename pagevec drained field
  ...
2017-11-15 19:42:40 -08:00
Levin, Alexander (Sasha Levin)
75f296d93b kmemcheck: stop using GFP_NOTRACK and SLAB_NOTRACK
Convert all allocations that used a NOTRACK flag to stop using it.

Link: http://lkml.kernel.org/r/20171007030159.22241-3-alexander.levin@verizon.com
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tim Hansen <devtimhansen@gmail.com>
Cc: Vegard Nossum <vegardno@ifi.uio.no>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-15 18:21:04 -08:00
Linus Torvalds
1b6115fbe3 pci-v4.15-changes
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJaDFIdAAoJEFmIoMA60/r8Jg4P/3IrmMNVnpqmYEZ7lRSW7UQ3
 8jtupbzIkbPsIAEhbJ7xqO7zKx85j6Og+ZSOv4a8u/tS6cd1aVZu2PpWsTkacez0
 7nLGVCSL3HZi5qcrtOvb2Pmke18SUKSPxVYSgS2ajQavB1oKaY03FbHDWyWidCZx
 qxkeGZOiUDw5kSGkQWyks1WgB0dd76rVbPcrKKEJueGgrdSm+EdgdDv8eT6bZInZ
 uMrCmSjNYTQP0KASCJJvgYOtJbdwvP6NuQTxzOlU2G+H2SqsLRjsz4UUR8FF06T5
 cndpgpG3QSAZLx7wCeWTvRorTEYORzKMoyw/AUjhiGbRep9Zw0aKNvCC99E6xjyD
 FECrk6kCrqZs7l+LVXK4SwpBXCVjNgRoFAHBEKF2X3/SWUkUhHXZHCVvMQB8LQiS
 2p8VRoYWw2aCLkHCGynuzToUrD2P2Pjxe5n/13aYVJkyBNfQqqZ3l2YHiZdpDO3j
 rgG6RW0WCrpZxfb/0WAbPnQ2qpZAwDPO6hOW7dIfTZabFVXRIkBvNq53by/0MxvP
 jyOcMTsq2l8y46f3VgNPUAHj0f52HwfZA3PQRPh+MQDz5385BJklDRWtfVM7cQx9
 IoeGkq1zLLvpOh63he/jnnRELxDvNVcxND8lOkenJlObj9kK63hUEcXg/zEMS4w3
 oetLw9TqE32Jb7GfpVSw
 =j4L3
 -----END PGP SIGNATURE-----

Merge tag 'pci-v4.15-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

Pull PCI updates from Bjorn Helgaas:

  - detach driver before tearing down procfs/sysfs (Alex Williamson)

  - disable PCIe services during shutdown (Sinan Kaya)

  - fix ASPM oops on systems with no Root Ports (Ard Biesheuvel)

  - fix ASPM LTR_L1.2_THRESHOLD programming (Bjorn Helgaas)

  - fix ASPM Common_Mode_Restore_Time computation (Bjorn Helgaas)

  - fix portdrv MSI/MSI-X vector allocation (Dongdong Liu, Bjorn
    Helgaas)

  - report non-fatal AER errors only to the affected endpoint (Gabriele
    Paoloni)

  - distribute bus numbers, MMIO, and I/O space among hotplug bridges to
    allow more devices to be hot-added (Mika Westerberg)

  - fix pciehp races during initialization and surprise link down (Mika
    Westerberg)

  - handle surprise-removed devices in PME handling (Qiang)

  - support resizable BARs for large graphics devices (Christian König)

  - expose SR-IOV offset, stride, and VF device ID via sysfs (Filippo
    Sironi)

  - create SR-IOV virtfn/physfn sysfs links before attaching driver
    (Stuart Hayes)

  - fix SR-IOV "ARI Capable Hierarchy" restore issue (Tony Nguyen)

  - enforce Kconfig IOV/REALLOC dependency (Sascha El-Sharkawy)

  - avoid slot reset if bridge itself is broken (Jan Glauber)

  - clean up pci_reset_function() path (Jan H. Schönherr)

  - make pci_map_rom() fail if the option ROM is invalid (Changbin Du)

  - convert timers to timer_setup() (Kees Cook)

  - move PCI_QUIRKS to PCI bus Kconfig menu (Randy Dunlap)

  - constify pci_dev_type and intel_mid_pci_ops (Bhumika Goyal)

  - remove unnecessary pci_dev, pci_bus, resource, pcibios_set_master()
    declarations (Bjorn Helgaas)

  - fix endpoint framework overflows and BUG()s (Dan Carpenter)

  - fix endpoint framework issues (Kishon Vijay Abraham I)

  - avoid broken Cavium CN8xxx bus reset behavior (David Daney)

  - extend Cavium ACS capability quirks (Vadim Lomovtsev)

  - support Synopsys DesignWare RC in ECAM mode (Ard Biesheuvel)

  - turn off dra7xx clocks cleanly on shutdown (Keerthy)

  - fix Faraday probe error path (Wei Yongjun)

  - support HiSilicon STB SoC PCIe host controller (Jianguo Sun)

  - fix Hyper-V interrupt affinity issue (Dexuan Cui)

  - remove useless ACPI warning for Hyper-V pass-through devices (Vitaly
    Kuznetsov)

  - support multiple MSI on iProc (Sandor Bodo-Merle)

  - support Layerscape LS1012a and LS1046a PCIe host controllers (Hou
    Zhiqiang)

  - fix Layerscape default error response (Minghuan Lian)

  - support MSI on Tango host controller (Marc Gonzalez)

  - support Tegra186 PCIe host controller (Manikanta Maddireddy)

  - use generic accessors on Tegra when possible (Thierry Reding)

  - support V3 Semiconductor PCI host controller (Linus Walleij)

* tag 'pci-v4.15-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (85 commits)
  PCI/ASPM: Add L1 Substates definitions
  PCI/ASPM: Reformat ASPM register definitions
  PCI/ASPM: Use correct capability pointer to program LTR_L1.2_THRESHOLD
  PCI/ASPM: Account for downstream device's Port Common_Mode_Restore_Time
  PCI: xgene: Rename xgene_pcie_probe_bridge() to xgene_pcie_probe()
  PCI: xilinx: Rename xilinx_pcie_link_is_up() to xilinx_pcie_link_up()
  PCI: altera: Rename altera_pcie_link_is_up() to altera_pcie_link_up()
  PCI: Fix kernel-doc build warning
  PCI: Fail pci_map_rom() if the option ROM is invalid
  PCI: Move pci_map_rom() error path
  PCI: Move PCI_QUIRKS to the PCI bus menu
  alpha/PCI: Make pdev_save_srm_config() static
  PCI: Remove unused declarations
  PCI: Remove redundant pci_dev, pci_bus, resource declarations
  PCI: Remove redundant pcibios_set_master() declarations
  PCI/PME: Handle invalid data when reading Root Status
  PCI: hv: Use effective affinity mask
  PCI: pciehp: Do not clear Presence Detect Changed during initialization
  PCI: pciehp: Fix race condition handling surprise link down
  PCI: Distribute available resources to hotplug-capable bridges
  ...
2017-11-15 15:01:28 -08:00
Jeff Layton
4d2dc2cc76 fcntl: don't cap l_start and l_end values for F_GETLK64 in compat syscall
Currently, we're capping the values too low in the F_GETLK64 case. The
fields in that structure are 64-bit values, so we shouldn't need to do
any sort of fixup there.

Make sure we check that assumption at build time in the future however
by ensuring that the sizes we're copying will fit.

With this, we no longer need COMPAT_LOFF_T_MAX either, so remove it.

Fixes: 94073ad77f (fs/locks: don't mess with the address limit in compat_fcntl64)
Reported-by: Vitaly Lipatov <lav@etersoft.ru>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: David Howells <dhowells@redhat.com>
2017-11-15 08:08:36 -05:00
Michael Ellerman
3ffa9d9e2a powerpc/64s: Fix Power9 DD2.0 workarounds by adding DD2.1 feature
Recently we added a CPU feature for Power9 DD2.0, to capture the fact
that some workarounds are required only on Power9 DD1 and DD2.0 but
not DD2.1 or later.

Then in commit 9d2f510a66 ("powerpc/64s/idle: avoid POWER9 DD1 and
DD2.0 ERAT workaround on DD2.1") and commit e3646330cf
"powerpc/64s/idle: avoid POWER9 DD1 and DD2.0 PMU workaround on
DD2.1") we changed CPU_FTR_SECTIONs to check for DD1 or DD20, eg:

  BEGIN_FTR_SECTION
          PPC_INVALIDATE_ERAT
  END_FTR_SECTION_IFSET(CPU_FTR_POWER9_DD1 | CPU_FTR_POWER9_DD20)

Unfortunately although this reads as "if set DD1 or DD2.0", the or is
a bitwise or and actually generates a mask of both bits. The code that
does the feature patching then checks that the value of the CPU
features masked with that mask are equal to the mask.

So the end result is we're checking for DD1 and DD20 being set, which
never happens. Yes the API is terrible.

Removing the ERAT workaround on DD2.0 results in random SEGVs, the
system tends to boot, but things randomly die including sometimes
dhclient, udev etc.

To fix the problem and hopefully avoid it in future, we remove the
DD2.0 CPU feature and instead add a DD2.1 (or later) feature. This
allows us to easily express that the workarounds are required if DD2.1
is not set.

At some point we will drop the DD1 workarounds entirely and some of
this can be cleaned up.

Fixes: 9d2f510a66 ("powerpc/64s/idle: avoid POWER9 DD1 and DD2.0 ERAT workaround on DD2.1")
Fixes: e3646330cf ("powerpc/64s/idle: avoid POWER9 DD1 and DD2.0 PMU workaround on DD2.1")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-11-15 14:25:42 +11:00
Linus Torvalds
e37e0ee019 A couple of dma-mapping updates:
- turn dma_cache_sync into a dma_map_ops instance and remove
    implementation that purely are dead because the architecture
    doesn't support noncoherent allocations
  - add a flag for busses that need DMA configuration (Robin Murphy)
 -----BEGIN PGP SIGNATURE-----
 
 iQI/BAABCAApFiEEgdbnc3r/njty3Iq9D55TZVIEUYMFAloLSrYLHGhjaEBsc3Qu
 ZGUACgkQD55TZVIEUYOMuQ//XXD94uNPYavrgXzGsAtg+I+LEm+xyk4T0dX5fxfj
 amXX49MHoGemjsBgzJlkQMMFqwDEdkKyEuFnEuy6OeowYCyD6zW0MJ3MwP9OosNJ
 PNTdGZIfSvxPYEW8cR9AdK3iQ2loMBZnYhd+O/oVjSugULLW2DNa7r2VRktcCKoh
 8Ob/8gL6Y9xEYJBRszhrBwKTa/hU8IThxxozBFzN7I3LIKyFboSTcwXGLAHow43g
 4anCTjWTaDcoU2JwY6UTRKRRTV+gD0ZRcsZfd8lNNb5rtMVZkBVOHbF14SMAmw1r
 kSgRcU3+WIFPhK/8wBYqtGZZGnOgFBTHVeqow3AdS728pBWlWl8niTK0DiIgCd3m
 qzScF6SqfN1bCZkZAy8FUV2l0DPYKS6lvyNkf00Eb2W/f6LEqAcjCi2QDDxRfaw+
 Vm97nPUiM+uXNy/6KtAy6ChdprSqx12/edXPp7Y3H2rS/+Dmr6exeix+wb7QUN8W
 JI7ZRHo4JLaJZk/XrZtGX/6jnN1Jo7vfApQOmYDY7kE1iGtOU/LQQj8gcZRVQxML
 4soN6ivSmZX2k03LabWHpYQ8QiyCSYChLC+Az7rQH47LDLeu1IdTJu6orpXpaxyo
 ymzEWlHbmF7mE66X4g/Up/eAYk2YLUA3rKLGVjAIaWDBzHftSFg5EaAnqMADC1G2
 hSo=
 =ALJf
 -----END PGP SIGNATURE-----

Merge tag 'dma-mapping-4.15' of git://git.infradead.org/users/hch/dma-mapping

Pull dma-mapping updates from Christoph Hellwig:

 - turn dma_cache_sync into a dma_map_ops instance and remove
   implementation that purely are dead because the architecture doesn't
   support noncoherent allocations

 - add a flag for busses that need DMA configuration (Robin Murphy)

* tag 'dma-mapping-4.15' of git://git.infradead.org/users/hch/dma-mapping:
  dma-mapping: turn dma_cache_sync into a dma_map_ops method
  sh: make dma_cache_sync a no-op
  xtensa: make dma_cache_sync a no-op
  unicore32: make dma_cache_sync a no-op
  powerpc: make dma_cache_sync a no-op
  mn10300: make dma_cache_sync a no-op
  microblaze: make dma_cache_sync a no-op
  ia64: make dma_cache_sync a no-op
  frv: make dma_cache_sync a no-op
  x86: make dma_cache_sync a no-op
  floppy: consolidate the dummy fd_cacheflush definition
  drivers: flag buses which demand DMA configuration
2017-11-14 16:54:12 -08:00
Nicholas Piggin
4722476bce powerpc/64s: mm_context.addr_limit is only used on hash
Radix keeps no meaningful state in addr_limit, so remove it from radix
code and rename to slb_addr_limit to make it clear it applies to hash
only.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-11-13 23:35:43 +11:00
Oliver O'Halloran
6c44741d75 powerpc/lib: Implement UACCESS_FLUSHCACHE API
Implement the architecture specific portitions of the UACCESS_FLUSHCACHE
API. This provides functions for the copy_user_flushcache iterator that
ensure that when the copy is finished the destination buffer contains
a copy of the original and that the destination buffer is clean in the
processor caches.

Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-11-13 08:00:31 +11:00
Sukadev Bhattiprolu
61f3cca8cd powerpc/vas: Define vas_win_id()
Define an interface to return a system-wide unique id for a given VAS
window.

The vas_win_id() will be used in a follow-on patch to generate an unique
handle for a user space receive window. Applications can use this handle
to pair send and receive windows for fast thread-wakeup.

The hardware refers to this system-wide unique id as a Partition Send
Window ID which is expected to be used during fault handling. Hence the
"pswid" in the function names.

Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-11-12 09:03:10 +11:00
Sukadev Bhattiprolu
5676be2fb7 powerpc/vas: Define vas_win_paste_addr()
Define an interface that the NX drivers can use to find the physical
paste address of a send window. This interface is expected to be used
with the mmap() operation of the NX driver's device. i.e the user space
process can use driver's mmap() operation to map the send window's paste
address into their address space and then use copy and paste instructions
to submit the CRBs to the NX engine.

Note that kernel drivers will use vas_paste_crb() directly and don't need
this interface.

Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-11-12 09:03:10 +11:00
Sukadev Bhattiprolu
9d2a4d7133 powerpc: Define set_thread_uses_vas()
A CP_ABORT instruction is required in processes that have mapped a VAS
"paste address" with the intention of using COPY/PASTE instructions.
But since CP_ABORT is expensive, we want to restrict it to only
processes that use/intend to use COPY/PASTE.

Define an interface, set_thread_uses_vas(), that VAS can use to
indicate that the current process opened a send window. During context
switch, issue CP_ABORT only for processes that have the flag set.

Thanks for input from Nick Piggin, Michael Ellerman.

Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
[mpe: Fix to not use new_thread after _switch() returns]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-11-12 09:03:09 +11:00
Sukadev Bhattiprolu
ec233ede4c powerpc: Add support for setting SPRN_TIDR
We need the SPRN_TIDR to be set for use with fast thread-wakeup (core-
to-core wakeup) and also with CAPI.

Each thread in a process needs to have a unique id within the process.
But for now, we assign globally unique thread ids to all threads in
the system.

Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Signed-off-by: Philippe Bergheaud <felix@linux.vnet.ibm.com>
Signed-off-by: Christophe Lombard <clombard@linux.vnet.ibm.com>
[mpe: Simplify tidr clearing on fork() and ctx switch code]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-11-12 09:03:09 +11:00
Sukadev Bhattiprolu
d4ef61b5e8 powerpc/vas, nx-842: Define and use chip_to_vas_id()
Define a helper, chip_to_vas_id() to map a given chip id to corresponding
vas id.

Normally, callers of vas_rx_win_open() and vas_tx_win_open() want the VAS
window to be on the same chip where the calling thread is executing. These
callers can pass in -1 for the VAS id.

This interface will be useful if a thread running on one chip wants to open
a window on another chip (like the NX-842 driver does during start up).

Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-11-12 09:03:08 +11:00
Michael Ellerman
a54c61f46e Merge branch 'fixes' into next
We have some dependencies & conflicts between patches in fixes and
things to go in next, both in the radix TLB flush code and the IMC PMU
driver. So merge fixes into next.
2017-11-10 20:55:03 +11:00
Bjorn Helgaas
be2d877aaa PCI: Remove redundant pci_dev, pci_bus, resource declarations
<linux/pci.h> defines struct pci_bus and struct pci_dev and includes the
struct resource definition before including <asm/pci.h>.  Nobody includes
<asm/pci.h> directly, so they don't need their own declarations.

Remove the redundant struct pci_dev, pci_bus, resource declarations.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>	# CRIS
Acked-by: Ralf Baechle <ralf@linux-mips.org>		# MIPS
2017-11-07 18:38:48 -06:00
Ingo Molnar
8c5db92a70 Merge branch 'linus' into locking/core, to resolve conflicts
Conflicts:
	include/linux/compiler-clang.h
	include/linux/compiler-gcc.h
	include/linux/compiler-intel.h
	include/uapi/linux/stddef.h

Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-11-07 10:32:44 +01:00
Nicholas Piggin
b6b3755e9b powerpc: add POWER9_DD20 feature
Cc: Michael Neuling <mikey@neuling.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-11-06 22:46:13 +11:00
Cyril Bur
eb5c3f1c86 powerpc: Always save/restore checkpointed regs during treclaim/trecheckpoint
Lazy save and restore of FP/Altivec means that a userspace process can
be sent to userspace with FP or Altivec disabled and loaded only as
required (by way of an FP/Altivec unavailable exception). Transactional
Memory complicates this situation as a transaction could be started
without FP/Altivec being loaded up. This causes the hardware to
checkpoint incorrect registers. Handling FP/Altivec unavailable
exceptions while a thread is transactional requires a reclaim and
recheckpoint to ensure the CPU has correct state for both sets of
registers.

tm_reclaim() has optimisations to not always save the FP/Altivec
registers to the checkpointed save area. This was originally done
because the caller might have information that the checkpointed
registers aren't valid due to lazy save and restore. We've also been a
little vague as to how tm_reclaim() leaves the FP/Altivec state since it
doesn't necessarily always save it to the thread struct. This has lead
to an (incorrect) assumption that it leaves the checkpointed state on
the CPU.

tm_recheckpoint() has similar optimisations in reverse. It may not
always reload the checkpointed FP/Altivec registers from the thread
struct before the trecheckpoint. It is therefore quite unclear where it
expects to get the state from. This didn't help with the assumption
made about tm_reclaim().

These optimisations sit in what is by definition a slow path. If a
process has to go through a reclaim/recheckpoint then its transaction
will be doomed on returning to userspace. This mean that the process
will be unable to complete its transaction and be forced to its failure
handler. This is already an out if line case for userspace. Furthermore,
the cost of copying 64 times 128 bits from registers isn't very long[0]
(at all) on modern processors. As such it appears these optimisations
have only served to increase code complexity and are unlikely to have
had a measurable performance impact.

Our transactional memory handling has been riddled with bugs. A cause
of this has been difficulty in following the code flow, code complexity
has not been our friend here. It makes sense to remove these
optimisations in favour of a (hopefully) more stable implementation.

This patch does mean that some times the assembly will needlessly save
'junk' registers which will subsequently get overwritten with the
correct value by the C code which calls the assembly function. This
small inefficiency is far outweighed by the reduction in complexity for
general TM code, context switching paths, and transactional facility
unavailable exception handler.

0: I tried to measure it once for other work and found that it was
hiding in the noise of everything else I was working with. I find it
exceedingly likely this will be the case here.

Signed-off-by: Cyril Bur <cyrilbur@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-11-06 20:39:33 +11:00
Cyril Bur
9aab24495c powerpc/opal: Add opal_async_wait_response_interruptible() to opal-async
This patch adds an _interruptible version of opal_async_wait_response().
This is useful when a long running OPAL call is performed on behalf of
a userspace thread, for example, the opal_flash_{read,write,erase}
functions performed by the powernv-flash MTD driver.

It is foreseeable that these functions would take upwards of two
minutes causing the wait_event() to block long enough to cause hung
task warnings. Furthermore, wait_event_interruptible() is preferable
as otherwise there is no way for signals to stop the process which is
going to be confusing in userspace.

Signed-off-by: Cyril Bur <cyrilbur@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-11-06 20:39:28 +11:00
Cyril Bur
59cf9a1cfc powerpc/opal: Make __opal_async_{get, release}_token() static
There are no callers of both __opal_async_get_token() and
__opal_async_release_token().

This patch also removes the possibility of "emergency through
synchronous call to __opal_async_get_token()" as such it makes more
sense to initialise opal_sync_sem for the maximum number of async
tokens.

Signed-off-by: Cyril Bur <cyrilbur@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-11-06 20:20:26 +11:00
Arnd Bergmann
edfd17ff39 powerpc/eeh: Stop using do_gettimeofday()
This interface is inefficient and deprecated because of the y2038
overflow.

ktime_get_seconds() is an appropriate replacement here, since it
has sufficient granularity but is more efficient and uses monotonic
time.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
Acked-by: Russell Currey <ruscur@russell.cc>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-11-06 17:40:00 +11:00
Michael Ellerman
4e00374704 powerpc/64s: Replace CONFIG_PPC_STD_MMU_64 with CONFIG_PPC_BOOK3S_64
CONFIG_PPC_STD_MMU_64 indicates support for the "standard" powerpc MMU
on 64-bit CPUs. The "standard" MMU refers to the hash page table MMU
found in "server" processors, from IBM mainly.

Currently CONFIG_PPC_STD_MMU_64 is == CONFIG_PPC_BOOK3S_64. While it's
annoying to have two symbols that always have the same value, it's not
quite annoying enough to bother removing one.

However with the arrival of Power9, we now have the situation where
CONFIG_PPC_STD_MMU_64 is enabled, but the kernel is running using the
Radix MMU - *not* the "standard" MMU. So it is now actively confusing
to use it, because it implies that code is disabled or inactive when
the Radix MMU is in use, however that is not necessarily true.

So s/CONFIG_PPC_STD_MMU_64/CONFIG_PPC_BOOK3S_64/, and do some minor
formatting updates of some of the affected lines.

This will be a pain for backports, but c'est la vie.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-11-06 16:48:14 +11:00
Michael Ellerman
c1807e3f84 powerpc/64: Free up CPU_FTR_ICSWX
The last user of CPU_FTR_ICSWX was removed in commit
6ff4d3e966 ("powerpc: Remove old unused icswx based coprocessor
support"), so free the bit up for future use.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-11-06 16:48:14 +11:00
Alexey Kardashevskiy
d6f934fd48 powerpc/powernv: Reserve a hole which appears after enabling IOV
In order to make generic IOV code work, the physical function IOV BAR
should start from offset of the first VF. Since M64 segments share
PE number space across PHB, and some PEs may be in use at the time
when IOV is enabled, the existing code shifts the IOV BAR to the index
of the first PE/VF. This creates a hole in IOMEM space which can be
potentially taken by some other device.

This reserves a temporary hole on a parent and releases it when IOV is
disabled; the temporary resources are stored in pci_dn to avoid
kmalloc/free.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-11-06 16:48:12 +11:00
Nicholas Piggin
30b49ec798 powerpc/64s/radix: Fix process table entry cache invalidation
According to the architecture, the process table entry cache must be
flushed with tlbie RIC=2.

Currently the process table entry is set to invalid right before the
PID is returned to the allocator, with no invalidation. This works on
existing implementations that are known to not cache the process table
entry for any except the current PIDR.

It is architecturally correct and cleaner to invalidate with RIC=2
after clearing the process table entry and before the PID is returned
to the allocator. This can be done in arch_exit_mmap that runs before
the final flush, and to ensure the final flush (fullmm) is always a
RIC=2 variant.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-11-06 16:48:10 +11:00
Nicholas Piggin
8ca9c08d0c powerpc/book3s: Add an HV variant of FIXUP_ENDIAN that is recoverable
Add an HV variant of FIXUP_ENDIAN which uses HSRR[01] and does not
clear MSR[RI], which improves recoverability.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-11-06 16:48:08 +11:00
Nicholas Piggin
f848ea7f59 powerpc/book3s: Use label for FIXUP_ENDIAN macro branch
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-11-06 16:48:07 +11:00
Nicholas Piggin
6de6638b35 KVM: PPC: Book3S HV: Handle host system reset in guest mode
If the host takes a system reset interrupt while a guest is running,
the CPU must exit the guest before processing the host exception
handler.

After this patch, taking a sysrq+x with a CPU running in a guest
gives a trace like this:

   cpu 0x27: Vector: 100 (System Reset) at [c000000fdf5776f0]
       pc: c008000010158b80: kvmppc_run_core+0x16b8/0x1ad0 [kvm_hv]
       lr: c008000010158b80: kvmppc_run_core+0x16b8/0x1ad0 [kvm_hv]
       sp: c000000fdf577850
      msr: 9000000002803033
     current = 0xc000000fdf4b1e00
     paca    = 0xc00000000fd4d680	 softe: 3	 irq_happened: 0x01
       pid   = 6608, comm = qemu-system-ppc
   Linux version 4.14.0-rc7-01489-g47e1893a404a-dirty #26 SMP
   [c000000fdf577a00] c008000010159dd4 kvmppc_vcpu_run_hv+0x3dc/0x12d0 [kvm_hv]
   [c000000fdf577b30] c0080000100a537c kvmppc_vcpu_run+0x44/0x60 [kvm]
   [c000000fdf577b60] c0080000100a1ae0 kvm_arch_vcpu_ioctl_run+0x118/0x310 [kvm]
   [c000000fdf577c00] c008000010093e98 kvm_vcpu_ioctl+0x530/0x7c0 [kvm]
   [c000000fdf577d50] c000000000357bf8 do_vfs_ioctl+0xd8/0x8c0
   [c000000fdf577df0] c000000000358448 SyS_ioctl+0x68/0x100
   [c000000fdf577e30] c00000000000b220 system_call+0x58/0x6c
   --- Exception: c01 (System Call) at 00007fff76868df0
   SP (7fff7069baf0) is in userspace

Fixes: e36d0a2ed5 ("powerpc/powernv: Implement NMI IPI with OPAL_SIGNAL_SYSTEM_RESET")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-11-06 16:48:06 +11:00
Linus Torvalds
866ba84ea3 powerpc fixes for 4.14 #6
A fix to the handling of misaligned paste instructions (P9 only), where a change
 to a #define has caused the check for the instruction to always fail.
 
 The preempt handling was unbalanced in the radix THP flush (P9 only). Though we
 don't generally use preempt we want to keep it working as much as possible.
 
 Two fixes for IMC (P9 only), one when booting with restricted number of CPUs and
 one in the error handling when initialisation fails due to firmware etc.
 
 A revert to fix function_graph on big endian machines, and then a rework of the
 reverted patch to fix kprobes blacklist handling on big endian machines.
 
 Thanks to:
   Anju T Sudhakar, Guilherme G. Piccoli, Madhavan Srinivasan, Naveen N. Rao,
   Nicholas Piggin, Paul Mackerras.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJZ/ASDAAoJEFHr6jzI4aWAtWYP/34uCIJ83roZHfBdASGcczeO
 AEOnxZdVdAB6ynU0eM2JSlJMhx39mqT5qJQP4ucUlqNa+SHhFxTW4EmoQm/qAr9N
 4xhwix6OAsMleiPJx+RGGAnKB8rFhUEYH/+cql67FAq3u8zRbAdurR/A1lnIAY9x
 2bQ85GsjFlRSFdmSohXegBJ7Xey3QE3jpj+co3dAEm3JQVRHNpGqgvRy8yeowvod
 c/hHH7vmdKyDCZDtS5uF/egZOJLK1mueVuV69O0KKxT7xtEKk1cjFB08aHhcuJDm
 QIk5Efr8iCbn4EyRBzthij7YJ0VPBTNCmsGcf6RorrYv3hT0uN72qQPjg13WH7HY
 wkdMtkQvaFLbnZDqOxm9saczE27Ce7QNe1PNh6eapNlunz2nsb8Z/SvSyqskK3Yh
 5cBxHrfi+NcJHvdDAJNobNoJ3vlTJGI0qQ/dSexJsXxZw2zR3tPojRKCtK0pZGql
 xKDSqU7AbuUhLMxVBDDSQ+KONwyaBS84baLc98dapflw7htGWU339c5f9JTmnGvZ
 7fWT3hNihAmZNZZ957BC5J0h5kgkKgZ7y67SA/+RI0o2ZoJlxoeDYAyqc7dwfvs+
 ncxG4S6okSQP/EHf9bRSdYeJsZup/zP7+wD+02cbJd5zFJ+6cfu0AhPDRcBNMjHg
 EPkZvfZzRxTlGvmHCoWv
 =vTi1
 -----END PGP SIGNATURE-----

Merge tag 'powerpc-4.14-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux

Pull powerpc fixes from Michael Ellerman:
 "Some more powerpc fixes for 4.14.

  This is bigger than I like to send at rc7, but that's at least partly
  because I didn't send any fixes last week. If it wasn't for the IMC
  driver, which is new and getting heavy testing, the diffstat would
  look a bit better. I've also added ftrace on big endian to my test
  suite, so we shouldn't break that again in future.

   - A fix to the handling of misaligned paste instructions (P9 only),
     where a change to a #define has caused the check for the
     instruction to always fail.

   - The preempt handling was unbalanced in the radix THP flush (P9
     only). Though we don't generally use preempt we want to keep it
     working as much as possible.

   - Two fixes for IMC (P9 only), one when booting with restricted
     number of CPUs and one in the error handling when initialisation
     fails due to firmware etc.

   - A revert to fix function_graph on big endian machines, and then a
     rework of the reverted patch to fix kprobes blacklist handling on
     big endian machines.

  Thanks to: Anju T Sudhakar, Guilherme G. Piccoli, Madhavan Srinivasan,
  Naveen N. Rao, Nicholas Piggin, Paul Mackerras"

* tag 'powerpc-4.14-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/perf: Fix core-imc hotplug callback failure during imc initialization
  powerpc/kprobes: Dereference function pointers only if the address does not belong to kernel text
  Revert "powerpc64/elfv1: Only dereference function descriptor for non-text symbols"
  powerpc/64s/radix: Fix preempt imbalance in TLB flush
  powerpc: Fix check for copy/paste instructions in alignment handler
  powerpc/perf: Fix IMC allocation routine
2017-11-03 09:25:53 -07:00
Greg Kroah-Hartman
e2be04c7f9 License cleanup: add SPDX license identifier to uapi header files with a license
Many user space API headers have licensing information, which is either
incomplete, badly formatted or just a shorthand for referring to the
license under which the file is supposed to be.  This makes it hard for
compliance tools to determine the correct license.

Update these files with an SPDX license identifier.  The identifier was
chosen based on the license information in the file.

GPL/LGPL licensed headers get the matching GPL/LGPL SPDX license
identifier with the added 'WITH Linux-syscall-note' exception, which is
the officially assigned exception identifier for the kernel syscall
exception:

   NOTE! This copyright does *not* cover user programs that use kernel
   services by normal system calls - this is merely considered normal use
   of the kernel, and does *not* fall under the heading of "derived work".

This exception makes it possible to include GPL headers into non GPL
code, without confusing license compliance tools.

Headers which have either explicit dual licensing or are just licensed
under a non GPL license are updated with the corresponding SPDX
identifier and the GPLv2 with syscall exception identifier.  The format
is:
        ((GPL-2.0 WITH Linux-syscall-note) OR SPDX-ID-OF-OTHER-LICENSE)

SPDX license identifiers are a legally binding shorthand, which can be
used instead of the full boiler plate text.  The update does not remove
existing license information as this has to be done on a case by case
basis and the copyright holders might have to be consulted. This will
happen in a separate step.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.  See the previous patch in this series for the
methodology of how this patch was researched.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02 11:20:11 +01:00
Greg Kroah-Hartman
6f52b16c5b License cleanup: add SPDX license identifier to uapi header files with no license
Many user space API headers are missing licensing information, which
makes it hard for compliance tools to determine the correct license.

By default are files without license information under the default
license of the kernel, which is GPLV2.  Marking them GPLV2 would exclude
them from being included in non GPLV2 code, which is obviously not
intended. The user space API headers fall under the syscall exception
which is in the kernels COPYING file:

   NOTE! This copyright does *not* cover user programs that use kernel
   services by normal system calls - this is merely considered normal use
   of the kernel, and does *not* fall under the heading of "derived work".

otherwise syscall usage would not be possible.

Update the files which contain no license information with an SPDX
license identifier.  The chosen identifier is 'GPL-2.0 WITH
Linux-syscall-note' which is the officially assigned identifier for the
Linux syscall exception.  SPDX license identifiers are a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.  See the previous patch in this series for the
methodology of how this patch was researched.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02 11:19:54 +01:00
Greg Kroah-Hartman
b24413180f License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02 11:10:55 +01:00
Naveen N. Rao
63be1a81e4 Revert "powerpc64/elfv1: Only dereference function descriptor for non-text symbols"
This reverts commit 83e840c770 ("powerpc64/elfv1: Only dereference
function descriptor for non-text symbols").

Chandan reported that on newer kernels, trying to enable function_graph
tracer on ppc64 (BE) locks up the system with the following trace:

  Unable to handle kernel paging request for data at address 0x600000002fa30010
  Faulting instruction address: 0xc0000000001f1300
  Thread overran stack, or stack corrupted
  Oops: Kernel access of bad area, sig: 11 [#1]
  BE SMP NR_CPUS=2048 DEBUG_PAGEALLOC NUMA pSeries
  Modules linked in:
  CPU: 1 PID: 6586 Comm: bash Not tainted 4.14.0-rc3-00162-g6e51f1f-dirty #20
  task: c000000625c07200 task.stack: c000000625c07310
  NIP:  c0000000001f1300 LR: c000000000121cac CTR: c000000000061af8
  REGS: c000000625c088c0 TRAP: 0380   Not tainted  (4.14.0-rc3-00162-g6e51f1f-dirty)
  MSR:  8000000000001032 <SF,ME,IR,DR,RI>  CR: 28002848  XER: 00000000
  CFAR: c0000000001f1320 SOFTE: 0
  ...
  NIP [c0000000001f1300] .__is_insn_slot_addr+0x30/0x90
  LR [c000000000121cac] .kernel_text_address+0x18c/0x1c0
  Call Trace:
  [c000000625c08b40] [c0000000001bd040] .is_module_text_address+0x20/0x40 (unreliable)
  [c000000625c08bc0] [c000000000121cac] .kernel_text_address+0x18c/0x1c0
  [c000000625c08c50] [c000000000061960] .prepare_ftrace_return+0x50/0x130
  [c000000625c08cf0] [c000000000061b10] .ftrace_graph_caller+0x14/0x34
  [c000000625c08d60] [c000000000121b40] .kernel_text_address+0x20/0x1c0
  [c000000625c08df0] [c000000000061960] .prepare_ftrace_return+0x50/0x130
  ...
  [c000000625c0ab30] [c000000000061960] .prepare_ftrace_return+0x50/0x130
  [c000000625c0abd0] [c000000000061b10] .ftrace_graph_caller+0x14/0x34
  [c000000625c0ac40] [c000000000121b40] .kernel_text_address+0x20/0x1c0
  [c000000625c0acd0] [c000000000061960] .prepare_ftrace_return+0x50/0x130
  [c000000625c0ad70] [c000000000061b10] .ftrace_graph_caller+0x14/0x34
  [c000000625c0ade0] [c000000000121b40] .kernel_text_address+0x20/0x1c0

This is because ftrace is using ppc_function_entry() for obtaining the
address of return_to_handler() in prepare_ftrace_return(). The call to
kernel_text_address() itself gets traced and we end up in a recursive
loop.

Fixes: 83e840c770 ("powerpc64/elfv1: Only dereference function descriptor for non-text symbols")
Cc: stable@vger.kernel.org # v4.13+
Reported-by: Chandan Rajendra <chandan@linux.vnet.ibm.com>
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-11-01 15:50:12 +11:00
Paul Mackerras
c01015091a KVM: PPC: Book3S HV: Run HPT guests on POWER9 radix hosts
This patch removes the restriction that a radix host can only run
radix guests, allowing us to run HPT (hashed page table) guests as
well.  This is useful because it provides a way to run old guest
kernels that know about POWER8 but not POWER9.

Unfortunately, POWER9 currently has a restriction that all threads
in a given code must either all be in HPT mode, or all in radix mode.
This means that when entering a HPT guest, we have to obtain control
of all 4 threads in the core and get them to switch their LPIDR and
LPCR registers, even if they are not going to run a guest.  On guest
exit we also have to get all threads to switch LPIDR and LPCR back
to host values.

To make this feasible, we require that KVM not be in the "independent
threads" mode, and that the CPU cores be in single-threaded mode from
the host kernel's perspective (only thread 0 online; threads 1, 2 and
3 offline).  That allows us to use the same code as on POWER8 for
obtaining control of the secondary threads.

To manage the LPCR/LPIDR changes required, we extend the kvm_split_info
struct to contain the information needed by the secondary threads.
All threads perform a barrier synchronization (where all threads wait
for every other thread to reach the synchronization point) on guest
entry, both before and after loading LPCR and LPIDR.  On guest exit,
they all once again perform a barrier synchronization both before
and after loading host values into LPCR and LPIDR.

Finally, it is also currently necessary to flush the entire TLB every
time we enter a HPT guest on a radix host.  We do this on thread 0
with a loop of tlbiel instructions.

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2017-11-01 15:36:41 +11:00
Paul Mackerras
516f7898ae KVM: PPC: Book3S HV: Allow for running POWER9 host in single-threaded mode
This patch allows for a mode on POWER9 hosts where we control all the
threads of a core, much as we do on POWER8.  The mode is controlled by
a module parameter on the kvm_hv module, called "indep_threads_mode".
The normal mode on POWER9 is the "independent threads" mode, with
indep_threads_mode=Y, where the host is in SMT4 mode (or in fact any
desired SMT mode) and each thread independently enters and exits from
KVM guests without reference to what other threads in the core are
doing.

If indep_threads_mode is set to N at the point when a VM is started,
KVM will expect every core that the guest runs on to be in single
threaded mode (that is, threads 1, 2 and 3 offline), and will set the
flag that prevents secondary threads from coming online.  We can still
use all four threads; the code that implements dynamic micro-threading
on POWER8 will become active in over-commit situations and will allow
up to three other VCPUs to be run on the secondary threads of the core
whenever a VCPU is run.

The reason for wanting this mode is that this will allow us to run HPT
guests on a radix host on a POWER9 machine that does not support
"mixed mode", that is, having some threads in a core be in HPT mode
while other threads are in radix mode.  It will also make it possible
to implement a "strict threads" mode in future, if desired.

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2017-11-01 15:36:35 +11:00
Paul Mackerras
18c3640cef KVM: PPC: Book3S HV: Add infrastructure for running HPT guests on radix host
This sets up the machinery for switching a guest between HPT (hashed
page table) and radix MMU modes, so that in future we can run a HPT
guest on a radix host on POWER9 machines.

* The KVM_PPC_CONFIGURE_V3_MMU ioctl can now specify either HPT or
  radix mode, on a radix host.

* The KVM_CAP_PPC_MMU_HASH_V3 capability now returns 1 on POWER9
  with HV KVM on a radix host.

* The KVM_PPC_GET_SMMU_INFO returns information about the HPT MMU on a
  radix host.

* The KVM_PPC_ALLOCATE_HTAB ioctl on a radix host will switch the
  guest to HPT mode and allocate a HPT.

* For simplicity, we now allocate the rmap array for each memslot,
  even on a radix host, since it will be needed if the guest switches
  to HPT mode.

* Since we cannot yet run a HPT guest on a radix host, the KVM_RUN
  ioctl will return an EINVAL error in that case.

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2017-11-01 15:36:28 +11:00
Paul Mackerras
e641a31783 KVM: PPC: Book3S HV: Unify dirty page map between HPT and radix
Currently, the HPT code in HV KVM maintains a dirty bit per guest page
in the rmap array, whether or not dirty page tracking has been enabled
for the memory slot.  In contrast, the radix code maintains a dirty
bit per guest page in memslot->dirty_bitmap, and only does so when
dirty page tracking has been enabled.

This changes the HPT code to maintain the dirty bits in the memslot
dirty_bitmap like radix does.  This results in slightly less code
overall, and will mean that we do not lose the dirty bits when
transitioning between HPT and radix mode in future.

There is one minor change to behaviour as a result.  With HPT, when
dirty tracking was enabled for a memslot, we would previously clear
all the dirty bits at that point (both in the HPT entries and in the
rmap arrays), meaning that a KVM_GET_DIRTY_LOG ioctl immediately
following would show no pages as dirty (assuming no vcpus have run
in the meantime).  With this change, the dirty bits on HPT entries
are not cleared at the point where dirty tracking is enabled, so
KVM_GET_DIRTY_LOG would show as dirty any guest pages that are
resident in the HPT and dirty.  This is consistent with what happens
on radix.

This also fixes a bug in the mark_pages_dirty() function for radix
(in the sense that the function no longer exists).  In the case where
a large page of 64 normal pages or more is marked dirty, the
addressing of the dirty bitmap was incorrect and could write past
the end of the bitmap.  Fortunately this case was never hit in
practice because a 2MB large page is only 32 x 64kB pages, and we
don't support backing the guest with 1GB huge pages at this point.

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2017-11-01 15:36:21 +11:00
Paul Mackerras
1b151ce466 KVM: PPC: Book3S HV: Rename hpte_setup_done to mmu_ready
This renames the kvm->arch.hpte_setup_done field to mmu_ready because
we will want to use it for radix guests too -- both for setting things
up before vcpu execution, and for excluding vcpus from executing while
MMU-related things get changed, such as in future switching the MMU
from radix to HPT mode or vice-versa.

This also moves the call to kvmppc_setup_partition_table() that was
done in kvmppc_hv_setup_htab_rma() for HPT guests, and the setting
of mmu_ready, into the caller in kvmppc_vcpu_run_hv().

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2017-11-01 15:36:12 +11:00
Paul Mackerras
8dc6cca556 KVM: PPC: Book3S HV: Don't rely on host's page size information
This removes the dependence of KVM on the mmu_psize_defs array (which
stores information about hardware support for various page sizes) and
the things derived from it, chiefly hpte_page_sizes[], hpte_page_size(),
hpte_actual_page_size() and get_sllp_encoding().  We also no longer
rely on the mmu_slb_size variable or the MMU_FTR_1T_SEGMENTS feature
bit.

The reason for doing this is so we can support a HPT guest on a radix
host.  In a radix host, the mmu_psize_defs array contains information
about page sizes supported by the MMU in radix mode rather than the
page sizes supported by the MMU in HPT mode.  Similarly, mmu_slb_size
and the MMU_FTR_1T_SEGMENTS bit are not set.

Instead we hard-code knowledge of the behaviour of the HPT MMU in the
POWER7, POWER8 and POWER9 processors (which are the only processors
supported by HV KVM) - specifically the encoding of the LP fields in
the HPT and SLB entries, and the fact that they have 32 SLB entries
and support 1TB segments.

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2017-11-01 15:36:06 +11:00
Michael Ellerman
6773027205 powerpc/mm/radix: Drop unneeded NULL check
We call these functions with non-NULL mm or vma. Hence we can skip the
NULL check in these functions. We also remove now unused function
__local_flush_hugetlb_page().

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
[mpe: Drop the checks with is_vm_hugetlb_page() as noticed by Nick]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-10-22 12:08:31 +02:00
Michael Ellerman
54820530c5 powerpc/powernv: Enable TM without suspend if possible
Some Power9 revisions can run in a mode where TM operates without
suspended state. If we find ourself on a CPU that might be in this
mode, we query OPAL to check, and if so we reenable TM in CPU
features, and enable a new user feature to signal to userspace that we
are in this mode.

We do not enable the "normal" user feature, PPC_FEATURE2_HTM, but we
do enable PPC_FEATURE2_HTM_NOSC because that indicates to userspace
that the kernel will abort transactions on syscall entry, which is
true regardless of the suspend mode.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-10-21 09:33:05 +11:00
Michael Ellerman
cba6ac4869 powerpc: Add PPC_FEATURE2_HTM_NO_SUSPEND
Some CPUs can operate in a mode where TM (Transactional Memory) is
enabled but the suspended state of TM is disabled. In this mode
tsuspend does not enter suspended state, instead the transaction is
aborted. Similarly any other event that would lead to suspended state
instead aborts the transaction.

There is also an ABI change, in that in this mode processes are not
allowed to sigreturn with an MSR that would lead to suspended state,
Linux will instead return an error to the sigreturn syscall.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-10-20 11:10:58 +11:00
Michael Ellerman
ddd46ed2e6 Merge branch 'topic/ppc-kvm' into next
Bring in some KVM commits we need (the TM one in particular).
2017-10-20 11:10:30 +11:00
Christoph Hellwig
c9eb6172c3 dma-mapping: turn dma_cache_sync into a dma_map_ops method
After we removed all the dead wood it turns out only two architectures
actually implement dma_cache_sync as a real op: mips and parisc.  Add
a cache_sync method to struct dma_map_ops and implement it for the
mips defualt DMA ops, and the parisc pa11 ops.

Note that arm, arc and openrisc support DMA_ATTR_NON_CONSISTENT, but
never provided a functional dma_cache_sync implementations, which
seems somewhat odd.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
2017-10-19 16:37:49 +02:00
Christoph Hellwig
87f626348a powerpc: make dma_cache_sync a no-op
powerpc does not implement DMA_ATTR_NON_CONSISTENT allocations, so it
doesn't make any sense to do any work in dma_cache_sync given that it
must be a no-op when dma_alloc_attrs returns coherent memory.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
2017-10-19 16:37:33 +02:00
Christoph Hellwig
acfef4f126 floppy: consolidate the dummy fd_cacheflush definition
Only mips defines this helper, so remove all the other arch definitions.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
2017-10-19 16:37:08 +02:00
Paul Mackerras
31a4d4480c Revert "KVM: PPC: Book3S HV: POWER9 does not require secondary thread management"
This reverts commit 94a04bc25a.

In order to run HPT guests on a radix POWER9 host, we will have to run
the host in single-threaded mode, because POWER9 processors do not
currently support running some threads of a core in HPT mode while
others are in radix mode ("mixed mode").

That means that we will need the same mechanisms that are used on
POWER8 to make the secondary threads available to KVM, which were
disabled on POWER9 by commit 94a04bc25a.

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-10-19 15:28:04 +11:00
Michael Bringmann
cee5405da4 powerpc/hotplug: Improve responsiveness of hotplug change
powerpc/hotplug: On Power systems with shared configurations of CPUs
and memory, there are some issues with the association of additional
CPUs and memory to nodes when hot-adding resources.  During hotplug
CPU operations, this patch resets the timer on topology update work
function to a small value to better ensure that the CPU topology is
detected and configured sooner.

Signed-off-by: Michael Bringmann <mwb@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-10-16 23:12:04 +11:00
Balbir Singh
ba41e1e1cc powerpc/mce: Hookup derror (load/store) UE errors
Extract physical_address for UE errors by walking the page
tables for the mm and address at the NIP, to extract the
instruction. Then use the instruction to find the effective
address via analyse_instr().

We might have page table walking races, but we expect them to
be rare, the physical address extraction is best effort. The idea
is to then hook up this infrastructure to memory failure eventually.

Signed-off-by: Balbir Singh <bsingharora@gmail.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-10-16 23:12:01 +11:00
Balbir Singh
73e341eb6b powerpc/mce: Remove unused function get_mce_fault_addr()
There are no users of get_mce_fault_addr() since commit
1363875bdb ("powerpc/64s: fix handling of non-synchronous machine
checks") removed the last usage.

Signed-off-by: Balbir Singh <bsingharora@gmail.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-10-16 23:11:19 +11:00
Will Deacon
a4c1887d4c locking/arch: Remove dummy arch_{read,spin,write}_lock_flags() implementations
The arch_{read,spin,write}_lock_flags() macros are simply mapped to the
non-flags versions by the majority of architectures, so do this in core
code and remove the dummy implementations. Also remove the implementation
in spinlock_up.h, since all callers of do_raw_spin_lock_flags() call
local_irq_save(flags) anyway.

Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: paulmck@linux.vnet.ibm.com
Link: http://lkml.kernel.org/r/1507055129-12300-4-git-send-email-will.deacon@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-10-10 11:50:19 +02:00
Will Deacon
a8a217c221 locking/core: Remove {read,spin,write}_can_lock()
Outside of the locking code itself, {read,spin,write}_can_lock() have no
users in tree. Apparmor (the last remaining user of write_can_lock()) got
moved over to lockdep by the previous patch.

This patch removes the use of {read,spin,write}_can_lock() from the
BUILD_LOCK_OPS macro, deferring to the trylock operation for testing the
lock status, and subsequently removes the unused macros altogether. They
aren't guaranteed to work in a concurrent environment and can give
incorrect results in the case of qrwlock.

Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: paulmck@linux.vnet.ibm.com
Link: http://lkml.kernel.org/r/1507055129-12300-2-git-send-email-will.deacon@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-10-10 11:50:18 +02:00
Seth Forshee
186b8f1587 powerpc: Always initialize input array when calling epapr_hypercall()
Several callers to epapr_hypercall() pass an uninitialized stack
allocated array for the input arguments, presumably because they
have no input arguments. However this can produce errors like
this one

 arch/powerpc/include/asm/epapr_hcalls.h:470:42: error: 'in' may be used uninitialized in this function [-Werror=maybe-uninitialized]
  unsigned long register r3 asm("r3") = in[0];
                                        ~~^~~

Fix callers to this function to always zero-initialize the input
arguments array to prevent this.

Signed-off-by: Seth Forshee <seth.forshee@canonical.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-10-06 20:50:58 +11:00
Naveen N. Rao
bf3a912517 powerpc/kprobes: Clean up jprobe detection in livepatch handler
In commit c05b8c4474 ("powerpc/kprobes: Skip livepatch_handler() for
jprobes"), we added a helper is_current_kprobe_addr() to help detect if
the modified regs->nip was due to a jprobe or livepatch. Masami felt
that the function name was not quite clear. To that end, this patch
renames is_current_kprobe_addr() to __is_active_jprobe() and adds a
comment to (hopefully) better clarify the purpose of this helper. The
helper has also now been moved to kprobes-ftrace.c so that it is only
available for KPROBES_ON_FTRACE.

Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-10-04 23:42:17 +11:00
Nicholas Piggin
e36d0a2ed5 powerpc/powernv: Implement NMI IPI with OPAL_SIGNAL_SYSTEM_RESET
This allows MSR[EE]=0 lockups to be detected on an OPAL (bare metal)
system similarly to the hcall NMI IPI on pseries guests, when the
platform/firmware supports it.

This is an example of CPU10 spinning with interrupts hard disabled:

  Watchdog CPU:32 detected Hard LOCKUP other CPUS:10
  Watchdog CPU:10 Hard LOCKUP
  CPU: 10 PID: 4410 Comm: bash Not tainted 4.13.0-rc7-00074-ge89ce1f89f62-dirty #34
  task: c0000003a82b4400 task.stack: c0000003af55c000
  NIP: c0000000000a7b38 LR: c000000000659044 CTR: c0000000000a7b00
  REGS: c00000000fd23d80 TRAP: 0100   Not tainted  (4.13.0-rc7-00074-ge89ce1f89f62-dirty)
  MSR: 90000000000c1033 <SF,HV,ME,IR,DR,RI,LE>
  CR: 28422222  XER: 20000000
  CFAR: c0000000000a7b38 SOFTE: 0
  GPR00: c000000000659044 c0000003af55fbb0 c000000001072a00 0000000000000078
  GPR04: c0000003c81b5c80 c0000003c81cc7e8 9000000000009033 0000000000000000
  GPR08: 0000000000000000 c0000000000a7b00 0000000000000001 9000000000001003
  GPR12: c0000000000a7b00 c00000000fd83200 0000000010180df8 0000000010189e60
  GPR16: 0000000010189ed8 0000000010151270 000000001018bd88 000000001018de78
  GPR20: 00000000370a0668 0000000000000001 00000000101645e0 0000000010163c10
  GPR24: 00007fffd14d6294 00007fffd14d6290 c000000000fba6f0 0000000000000004
  GPR28: c000000000f351d8 0000000000000078 c000000000f4095c 0000000000000000
  NIP [c0000000000a7b38] sysrq_handle_xmon+0x38/0x40
  LR [c000000000659044] __handle_sysrq+0xe4/0x270
  Call Trace:
  [c0000003af55fbd0] [c000000000659044] __handle_sysrq+0xe4/0x270
  [c0000003af55fc70] [c000000000659810] write_sysrq_trigger+0x70/0xa0
  [c0000003af55fca0] [c0000000003da650] proc_reg_write+0xb0/0x110
  [c0000003af55fcf0] [c0000000003423bc] __vfs_write+0x6c/0x1b0
  [c0000003af55fd90] [c000000000344398] vfs_write+0xd8/0x240
  [c0000003af55fde0] [c00000000034632c] SyS_write+0x6c/0x110
  [c0000003af55fe30] [c00000000000b220] system_call+0x58/0x6c

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Use kernel types for opal_signal_system_reset()]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-10-04 11:27:27 +11:00
Frederic Barrat
03b8abedf4 cxl: Enable global TLBIs for cxl contexts
The PSL and nMMU need to see all TLB invalidations for the memory
contexts used on the adapter. For the hash memory model, it is done by
making all TLBIs global as soon as the cxl driver is in use. For
radix, we need something similar, but we can refine and only convert
to global the invalidations for contexts actually used by the device.

The new mm_context_add_copro() API increments the 'active_cpus' count
for the contexts attached to the cxl adapter. As soon as there's more
than 1 active cpu, the TLBIs for the context become global. Active cpu
count must be decremented when detaching to restore locality if
possible and to avoid overflowing the counter.

The hash memory model support is somewhat limited, as we can't
decrement the active cpus count when mm_context_remove_copro() is
called, because we can't flush the TLB for a mm on hash. So TLBIs
remain global on hash.

Signed-off-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com>
Fixes: f24be42aab ("cxl: Add psl9 specific code")
Tested-by: Alistair Popple <alistair@popple.id.au>
[mpe: Fold in updated comment on the barrier from Fred]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-09-28 17:09:16 +10:00
Frederic Barrat
6110236b9b powerpc/mm: Export flush_all_mm()
With the optimizations introduced by commit a46cc7a90f
("powerpc/mm/radix: Improve TLB/PWC flushes"), flush_tlb_mm() no
longer flushes the page walk cache (PWC) with radix. This patch
introduces flush_all_mm(), which flushes everything, TLB and PWC, for
a given mm.

Signed-off-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com>
Reviewed-By: Alistair Popple <alistair@popple.id.au>
[mpe: Add a WARN_ON_ONCE() in the empty hash routines]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-09-28 16:28:22 +10:00
Michael Neuling
5080332c2c powerpc/64s: Add workaround for P9 vector CI load issue
POWER9 DD2.1 and earlier has an issue where some cache inhibited
vector load will return bad data. The workaround is two part, one
firmware/microcode part triggers HMI interrupts when hitting such
loads, the other part is this patch which then emulates the
instructions in Linux.

The affected instructions are limited to lxvd2x, lxvw4x, lxvb16x and
lxvh8x.

When an instruction triggers the HMI, all threads in the core will be
sent to the HMI handler, not just the one running the vector load.

In general, these spurious HMIs are detected by the emulation code and
we just return back to the running process. Unfortunately, if a
spurious interrupt occurs on a vector load that's to normal memory we
have no way to detect that it's spurious (unless we walk the page
tables, which is very expensive). In this case we emulate the load but
we need do so using a vector load itself to ensure 128bit atomicity is
preserved.

Some additional debugfs emulated instruction counters are added also.

Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
[mpe: Switch CONFIG_PPC_BOOK3S_64 to CONFIG_VSX to unbreak the build]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-09-27 08:23:22 +10:00
Benjamin Herrenschmidt
b9fde58db7 powerpc/powernv: Rework EEH initialization on powernv
Remove the post_init callback which is only used
by powernv, we can just call it explicitly from
the powernv code.

This partially kills the ability to "disable" eeh at
runtime via debugfs as this was calling that same
callback again, but this is both unused and broken
in several ways. If we want to revive it, we need
to create a dedicated enable/disable callback on the
backend that does the right thing.

Let the bulk of eeh initialize normally at
core_initcall() like it does on pseries by removing
the hack in eeh_init() that delays it.

Instead we make sure our eeh->probe cleanly bails
out of the PEs haven't been created yet and we force
a re-probe where we used to call eeh_init() again.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Russell Currey <ruscur@russell.cc>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-09-26 11:19:07 +10:00
Linus Torvalds
fbf4432ff7 Merge branch 'akpm' (patches from Andrew)
Merge more updates from Andrew Morton:

 - most of the rest of MM

 - a small number of misc things

 - lib/ updates

 - checkpatch

 - autofs updates

 - ipc/ updates

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (126 commits)
  ipc: optimize semget/shmget/msgget for lots of keys
  ipc/sem: play nicer with large nsops allocations
  ipc/sem: drop sem_checkid helper
  ipc: convert kern_ipc_perm.refcount from atomic_t to refcount_t
  ipc: convert sem_undo_list.refcnt from atomic_t to refcount_t
  ipc: convert ipc_namespace.count from atomic_t to refcount_t
  kcov: support compat processes
  sh: defconfig: cleanup from old Kconfig options
  mn10300: defconfig: cleanup from old Kconfig options
  m32r: defconfig: cleanup from old Kconfig options
  drivers/pps: use surrounding "if PPS" to remove numerous dependency checks
  drivers/pps: aesthetic tweaks to PPS-related content
  cpumask: make cpumask_next() out-of-line
  kmod: move #ifdef CONFIG_MODULES wrapper to Makefile
  kmod: split off umh headers into its own file
  MAINTAINERS: clarify kmod is just a kernel module loader
  kmod: split out umh code into its own file
  test_kmod: flip INT checks to be consistent
  test_kmod: remove paranoid UINT_MAX check on uint range processing
  vfat: deduplicate hex2bin()
  ...
2017-09-09 10:30:07 -07:00
Matthew Wilcox
ac036f9570 vga: optimise console scrolling
Where possible, call memset16(), memmove() or memcpy() instead of using
open-coded loops.  I don't like the calling convention that uses a byte
count instead of a count of u16s, but it's a little late to change that.
Reduces code size of fbcon.o by almost 400 bytes on my laptop build.

[akpm@linux-foundation.org: fix build]
Link: http://lkml.kernel.org/r/20170720184539.31609-9-willy@infradead.org
Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: David Miller <davem@davemloft.net>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: "James E.J. Bottomley" <jejb@linux.vnet.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Russell King <rmk+kernel@armlinux.org.uk>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-08 18:26:48 -07:00
Linus Torvalds
0756b7fbb6 First batch of KVM changes for 4.14
Common:
  - improve heuristic for boosting preempted spinlocks by ignoring VCPUs
    in user mode
 
 ARM:
  - fix for decoding external abort types from guests
 
  - added support for migrating the active priority of interrupts when
    running a GICv2 guest on a GICv3 host
 
  - minor cleanup
 
 PPC:
  - expose storage keys to userspace
 
  - merge powerpc/topic/ppc-kvm branch that contains
    find_linux_pte_or_hugepte and POWER9 thread management cleanup
 
  - merge kvm-ppc-fixes with a fix that missed 4.13 because of vacations
 
  - fixes
 
 s390:
  - merge of topic branch tlb-flushing from the s390 tree to get the
    no-dat base features
 
  - merge of kvm/master to avoid conflicts with additional sthyi fixes
 
  - wire up the no-dat enhancements in KVM
 
  - multiple epoch facility (z14 feature)
 
  - Configuration z/Architecture Mode
 
  - more sthyi fixes
 
  - gdb server range checking fix
 
  - small code cleanups
 
 x86:
  - emulate Hyper-V TSC frequency MSRs
 
  - add nested INVPCID
 
  - emulate EPTP switching VMFUNC
 
  - support Virtual GIF
 
  - support 5 level page tables
 
  - speedup nested VM exits by packing byte operations
 
  - speedup MMIO by using hardware provided physical address
 
  - a lot of fixes and cleanups, especially nested
 -----BEGIN PGP SIGNATURE-----
 
 iQEcBAABCAAGBQJZspE1AAoJEED/6hsPKofoDcMIALT11n+LKV50QGwQdg2W1GOt
 aChbgnj/Kegit3hQlDhVNb8kmdZEOZzSL81Lh0VPEr7zXU8QiWn2snbizDPv8sde
 MpHhcZYZZ0YrpoiZKjl8yiwcu88OWGn2qtJ7OpuTS5hvEGAfxMncp0AMZho6fnz/
 ySTwJ9GK2MTgBw39OAzCeDOeoYn4NKYMwjJGqBXRhNX8PG/1wmfqv0vPrd6wfg31
 KJ58BumavwJjr8YbQ1xELm9rpQrAmaayIsG0R1dEUqCbt5a1+t2gt4h2uY7tWcIv
 ACt2bIze7eF3xA+OpRs+eT+yemiH3t9btIVmhCfzUpnQ+V5Z55VMSwASLtTuJRQ=
 =R8Ry
 -----END PGP SIGNATURE-----

Merge tag 'kvm-4.14-1' of git://git.kernel.org/pub/scm/virt/kvm/kvm

Pull KVM updates from Radim Krčmář:
 "First batch of KVM changes for 4.14

  Common:
   - improve heuristic for boosting preempted spinlocks by ignoring
     VCPUs in user mode

  ARM:
   - fix for decoding external abort types from guests

   - added support for migrating the active priority of interrupts when
     running a GICv2 guest on a GICv3 host

   - minor cleanup

  PPC:
   - expose storage keys to userspace

   - merge kvm-ppc-fixes with a fix that missed 4.13 because of
     vacations

   - fixes

  s390:
   - merge of kvm/master to avoid conflicts with additional sthyi fixes

   - wire up the no-dat enhancements in KVM

   - multiple epoch facility (z14 feature)

   - Configuration z/Architecture Mode

   - more sthyi fixes

   - gdb server range checking fix

   - small code cleanups

  x86:
   - emulate Hyper-V TSC frequency MSRs

   - add nested INVPCID

   - emulate EPTP switching VMFUNC

   - support Virtual GIF

   - support 5 level page tables

   - speedup nested VM exits by packing byte operations

   - speedup MMIO by using hardware provided physical address

   - a lot of fixes and cleanups, especially nested"

* tag 'kvm-4.14-1' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (67 commits)
  KVM: arm/arm64: Support uaccess of GICC_APRn
  KVM: arm/arm64: Extract GICv3 max APRn index calculation
  KVM: arm/arm64: vITS: Drop its_ite->lpi field
  KVM: arm/arm64: vgic: constify seq_operations and file_operations
  KVM: arm/arm64: Fix guest external abort matching
  KVM: PPC: Book3S HV: Fix memory leak in kvm_vm_ioctl_get_htab_fd
  KVM: s390: vsie: cleanup mcck reinjection
  KVM: s390: use WARN_ON_ONCE only for checking
  KVM: s390: guestdbg: fix range check
  KVM: PPC: Book3S HV: Report storage key support to userspace
  KVM: PPC: Book3S HV: Fix case where HDEC is treated as 32-bit on POWER9
  KVM: PPC: Book3S HV: Fix invalid use of register expression
  KVM: PPC: Book3S HV: Fix H_REGISTER_VPA VPA size validation
  KVM: PPC: Book3S HV: Fix setting of storage key in H_ENTER
  KVM: PPC: e500mc: Fix a NULL dereference
  KVM: PPC: e500: Fix some NULL dereferences on error
  KVM: PPC: Book3S HV: Protect updates to spapr_tce_tables list
  KVM: s390: we are always in czam mode
  KVM: s390: expose no-DAT to guest and migration support
  KVM: s390: sthyi: remove invalid guest write access
  ...
2017-09-08 15:18:36 -07:00
Linus Torvalds
bac65d9d87 powerpc updates for 4.14
Nothing really major this release, despite quite a lot of activity. Just lots of
 things all over the place.
 
 Some things of note include:
 
  - Access via perf to a new type of PMU (IMC) on Power9, which can count both
    core events as well as nest unit events (Memory controller etc).
 
  - Optimisations to the radix MMU TLB flushing, mostly to avoid unnecessary Page
    Walk Cache (PWC) flushes when the structure of the tree is not changing.
 
  - Reworks/cleanups of do_page_fault() to modernise it and bring it closer to
    other architectures where possible.
 
  - Rework of our page table walking so that THP updates only need to send IPIs
    to CPUs where the affected mm has run, rather than all CPUs.
 
  - The size of our vmalloc area is increased to 56T on 64-bit hash MMU systems.
    This avoids problems with the percpu allocator on systems with very sparse
    NUMA layouts.
 
  - STRICT_KERNEL_RWX support on PPC32.
 
  - A new sched domain topology for Power9, to capture the fact that pairs of
    cores may share an L2 cache.
 
  - Power9 support for VAS, which is a new mechanism for accessing coprocessors,
    and initial support for using it with the NX compression accelerator.
 
  - Major work on the instruction emulation support, adding support for many new
    instructions, and reworking it so it can be used to implement the emulation
    needed to fixup alignment faults.
 
  - Support for guests under PowerVM to use the Power9 XIVE interrupt controller.
 
 And probably that many things again that are almost as interesting, but I had to
 keep the list short. Plus the usual fixes and cleanups as always.
 
 Thanks to:
   Alexey Kardashevskiy, Alistair Popple, Andreas Schwab, Aneesh Kumar K.V, Anju
   T Sudhakar, Arvind Yadav, Balbir Singh, Benjamin Herrenschmidt, Bhumika Goyal,
   Breno Leitao, Bryant G. Ly, Christophe Leroy, Cédric Le Goater, Dan Carpenter,
   Dou Liyang, Frederic Barrat, Gautham R. Shenoy, Geliang Tang, Geoff Levand,
   Hannes Reinecke, Haren Myneni, Ivan Mikhaylov, John Allen, Julia Lawall, LABBE
   Corentin, Laurentiu Tudor, Madhavan Srinivasan, Markus Elfring, Masahiro
   Yamada, Matt Brown, Michael Neuling, Murilo Opsfelder Araujo, Nathan Fontenot,
   Naveen N. Rao, Nicholas Piggin, Oliver O'Halloran, Paul Mackerras, Rashmica
   Gupta, Rob Herring, Rui Teng, Sam Bobroff, Santosh Sivaraj, Scott Wood,
   Shilpasri G Bhat, Sukadev Bhattiprolu, Suraj Jitindar Singh, Tobin C. Harding,
   Victor Aoqui.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJZr83SAAoJEFHr6jzI4aWA6pUP/3CEaj2bSxNzWIwidqyYjuoS
 O1moEsP0oYH7eBEWVHalYxvo0QPIIAhbFPaFyrOrgtfDH01Szwu9LcCALGb8orC5
 Hg3IY8mpNG3Q1T8wEtTa56Ik4b5ZFty35S5+X9qLNSFoDUqSvGlSsLzhPNN7f2tl
 XFm2hWqd8wXCwDsuVSFBCF61M3SAm+g6NMVNJ+VL2KIDCwBrOZLhKDPRoxLTAuMa
 jjSdjVIozWyXjUrBFi8HVcoOWLxcT1HsNF0tRs51LwY/+Mlj2jAtFtsx+a06HZa6
 f2p/Kcp/MEispSTk064Ap9cC1seXWI18zwZKpCUFqu0Ec2yTAiGdjOWDyYQldIp+
 ttVPSHQ01YrVKwDFTtM9CiA0EET6fVPhWgAPkPfvH5TvtKwGkNdy0b+nQLuWrYip
 BUmOXmjdIG3nujCzA9sv6/uNNhjhj2y+HWwuV7Qo002VFkhgZFL67u2SSUQLpYPj
 PxdkY8pPVq+O+in94oDV3c36dYFF6+g6A6505Vn6eKUm/TLpszRFGkS3bKKA5vtn
 74FR+guV/5RwYJcdZbfm04DgAocl7AfUDxpwRxibt6KtAK2VZKQuw4ugUTgYEd7W
 mL2+AMmPKuajWXAMTHjCZPbUp9gFNyYyBQTFfGVX/XLiM8erKBnGfoa1/KzUJkhr
 fVZLYIO/gzl34PiTIfgD
 =UJtt
 -----END PGP SIGNATURE-----

Merge tag 'powerpc-4.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux

Pull powerpc updates from Michael Ellerman:
 "Nothing really major this release, despite quite a lot of activity.
  Just lots of things all over the place.

  Some things of note include:

   - Access via perf to a new type of PMU (IMC) on Power9, which can
     count both core events as well as nest unit events (Memory
     controller etc).

   - Optimisations to the radix MMU TLB flushing, mostly to avoid
     unnecessary Page Walk Cache (PWC) flushes when the structure of the
     tree is not changing.

   - Reworks/cleanups of do_page_fault() to modernise it and bring it
     closer to other architectures where possible.

   - Rework of our page table walking so that THP updates only need to
     send IPIs to CPUs where the affected mm has run, rather than all
     CPUs.

   - The size of our vmalloc area is increased to 56T on 64-bit hash MMU
     systems. This avoids problems with the percpu allocator on systems
     with very sparse NUMA layouts.

   - STRICT_KERNEL_RWX support on PPC32.

   - A new sched domain topology for Power9, to capture the fact that
     pairs of cores may share an L2 cache.

   - Power9 support for VAS, which is a new mechanism for accessing
     coprocessors, and initial support for using it with the NX
     compression accelerator.

   - Major work on the instruction emulation support, adding support for
     many new instructions, and reworking it so it can be used to
     implement the emulation needed to fixup alignment faults.

   - Support for guests under PowerVM to use the Power9 XIVE interrupt
     controller.

  And probably that many things again that are almost as interesting,
  but I had to keep the list short. Plus the usual fixes and cleanups as
  always.

  Thanks to: Alexey Kardashevskiy, Alistair Popple, Andreas Schwab,
  Aneesh Kumar K.V, Anju T Sudhakar, Arvind Yadav, Balbir Singh,
  Benjamin Herrenschmidt, Bhumika Goyal, Breno Leitao, Bryant G. Ly,
  Christophe Leroy, Cédric Le Goater, Dan Carpenter, Dou Liyang,
  Frederic Barrat, Gautham R. Shenoy, Geliang Tang, Geoff Levand, Hannes
  Reinecke, Haren Myneni, Ivan Mikhaylov, John Allen, Julia Lawall,
  LABBE Corentin, Laurentiu Tudor, Madhavan Srinivasan, Markus Elfring,
  Masahiro Yamada, Matt Brown, Michael Neuling, Murilo Opsfelder Araujo,
  Nathan Fontenot, Naveen N. Rao, Nicholas Piggin, Oliver O'Halloran,
  Paul Mackerras, Rashmica Gupta, Rob Herring, Rui Teng, Sam Bobroff,
  Santosh Sivaraj, Scott Wood, Shilpasri G Bhat, Sukadev Bhattiprolu,
  Suraj Jitindar Singh, Tobin C. Harding, Victor Aoqui"

* tag 'powerpc-4.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (321 commits)
  powerpc/xive: Fix section __init warning
  powerpc: Fix kernel crash in emulation of vector loads and stores
  powerpc/xive: improve debugging macros
  powerpc/xive: add XIVE Exploitation Mode to CAS
  powerpc/xive: introduce H_INT_ESB hcall
  powerpc/xive: add the HW IRQ number under xive_irq_data
  powerpc/xive: introduce xive_esb_write()
  powerpc/xive: rename xive_poke_esb() in xive_esb_read()
  powerpc/xive: guest exploitation of the XIVE interrupt controller
  powerpc/xive: introduce a common routine xive_queue_page_alloc()
  powerpc/sstep: Avoid used uninitialized error
  axonram: Return directly after a failed kzalloc() in axon_ram_probe()
  axonram: Improve a size determination in axon_ram_probe()
  axonram: Delete an error message for a failed memory allocation in axon_ram_probe()
  powerpc/powernv/npu: Move tlb flush before launching ATSD
  powerpc/macintosh: constify wf_sensor_ops structures
  powerpc/iommu: Use permission-specific DEVICE_ATTR variants
  powerpc/eeh: Delete an error out of memory message at init time
  powerpc/mm: Use seq_putc() in two functions
  macintosh: Convert to using %pOF instead of full_name
  ...
2017-09-07 10:15:40 -07:00
Mike Kravetz
aafd4562df mm: arch: consolidate mmap hugetlb size encodings
A non-default huge page size can be encoded in the flags argument of the
mmap system call.  The definitions for these encodings are in arch
specific header files.  However, all architectures use the same values.

Consolidate all the definitions in the primary user header file
(uapi/linux/mman.h).  Include definitions for all known huge page sizes.
Use the generic encoding definitions in hugetlb_encode.h as the basis
for these definitions.

Link: http://lkml.kernel.org/r/1501527386-10736-3-git-send-email-mike.kravetz@oracle.com
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Davidlohr Bueso <dbueso@suse.de>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-06 17:27:28 -07:00
Linus Torvalds
5f82e71a00 Merge branch 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking updates from Ingo Molnar:

 - Add 'cross-release' support to lockdep, which allows APIs like
   completions, where it's not the 'owner' who releases the lock, to be
   tracked. It's all activated automatically under
   CONFIG_PROVE_LOCKING=y.

 - Clean up (restructure) the x86 atomics op implementation to be more
   readable, in preparation of KASAN annotations. (Dmitry Vyukov)

 - Fix static keys (Paolo Bonzini)

 - Add killable versions of down_read() et al (Kirill Tkhai)

 - Rework and fix jump_label locking (Marc Zyngier, Paolo Bonzini)

 - Rework (and fix) tlb_flush_pending() barriers (Peter Zijlstra)

 - Remove smp_mb__before_spinlock() and convert its usages, introduce
   smp_mb__after_spinlock() (Peter Zijlstra)

* 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (56 commits)
  locking/lockdep/selftests: Fix mixed read-write ABBA tests
  sched/completion: Avoid unnecessary stack allocation for COMPLETION_INITIALIZER_ONSTACK()
  acpi/nfit: Fix COMPLETION_INITIALIZER_ONSTACK() abuse
  locking/pvqspinlock: Relax cmpxchg's to improve performance on some architectures
  smp: Avoid using two cache lines for struct call_single_data
  locking/lockdep: Untangle xhlock history save/restore from task independence
  locking/refcounts, x86/asm: Disable CONFIG_ARCH_HAS_REFCOUNT for the time being
  futex: Remove duplicated code and fix undefined behaviour
  Documentation/locking/atomic: Finish the document...
  locking/lockdep: Fix workqueue crossrelease annotation
  workqueue/lockdep: 'Fix' flush_work() annotation
  locking/lockdep/selftests: Add mixed read-write ABBA tests
  mm, locking/barriers: Clarify tlb_flush_pending() barriers
  locking/lockdep: Make CONFIG_LOCKDEP_CROSSRELEASE and CONFIG_LOCKDEP_COMPLETIONS truly non-interactive
  locking/lockdep: Explicitly initialize wq_barrier::done::map
  locking/lockdep: Rename CONFIG_LOCKDEP_COMPLETE to CONFIG_LOCKDEP_COMPLETIONS
  locking/lockdep: Reword title of LOCKDEP_CROSSRELEASE config
  locking/lockdep: Make CONFIG_LOCKDEP_CROSSRELEASE part of CONFIG_PROVE_LOCKING
  locking/refcounts, x86/asm: Implement fast refcount overflow protection
  locking/lockdep: Fix the rollback and overwrite detection logic in crossrelease
  ...
2017-09-04 11:52:29 -07:00
Linus Torvalds
0081a0ce80 Merge branch 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull RCU updates from Ingo Molnad:
 "The main RCU related changes in this cycle were:

   - Removal of spin_unlock_wait()
   - SRCU updates
   - RCU torture-test updates
   - RCU Documentation updates
   - Extend the sys_membarrier() ABI with the MEMBARRIER_CMD_PRIVATE_EXPEDITED variant
   - Miscellaneous RCU fixes
   - CPU-hotplug fixes"

* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (63 commits)
  arch: Remove spin_unlock_wait() arch-specific definitions
  locking: Remove spin_unlock_wait() generic definitions
  drivers/ata: Replace spin_unlock_wait() with lock/unlock pair
  ipc: Replace spin_unlock_wait() with lock/unlock pair
  exit: Replace spin_unlock_wait() with lock/unlock pair
  completion: Replace spin_unlock_wait() with lock/unlock pair
  doc: Set down RCU's scheduling-clock-interrupt needs
  doc: No longer allowed to use rcu_dereference on non-pointers
  doc: Add RCU files to docbook-generation files
  doc: Update memory-barriers.txt for read-to-write dependencies
  doc: Update RCU documentation
  membarrier: Provide expedited private command
  rcu: Remove exports from rcu_idle_exit() and rcu_idle_enter()
  rcu: Add warning to rcu_idle_enter() for irqs enabled
  rcu: Make rcu_idle_enter() rely on callers disabling irqs
  rcu: Add assertions verifying blocked-tasks list
  rcu/tracing: Set disable_rcu_irq_enter on rcu_eqs_exit()
  rcu: Add TPS() protection for _rcu_barrier_trace strings
  rcu: Use idle versions of swait to make idle-hack clear
  swait: Add idle variants which don't contribute to load average
  ...
2017-09-04 08:13:52 -07:00
Ingo Molnar
edc2988c54 Merge branch 'linus' into locking/core, to fix up conflicts
Conflicts:
	mm/page_alloc.c

Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-09-04 11:01:18 +02:00
Cédric Le Goater
ac5e5a5402 powerpc/xive: add XIVE Exploitation Mode to CAS
On POWER9, the Client Architecture Support (CAS) negotiation process
determines whether the guest operates in XIVE Legacy compatibility or
in XIVE exploitation mode. Now that we have initial guest support for
the XIVE interrupt controller, let's inform the hypervisor what we can
do.

The platform advertises the XIVE Exploitation Mode support using the
property "ibm,arch-vec-5-platform-support-vec-5", byte 23 bits 0-1 :

 - 0b00 XIVE legacy mode Only
 - 0b01 XIVE exploitation mode Only
 - 0b10 XIVE legacy or exploitation mode

The OS asks for XIVE Exploitation Mode support using the property
"ibm,architecture-vec-5", byte 23 bits 0-1:

 - 0b00 XIVE legacy mode Only
 - 0b01 XIVE exploitation mode Only

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-09-02 21:02:38 +10:00
Cédric Le Goater
bed81ee181 powerpc/xive: introduce H_INT_ESB hcall
The H_INT_ESB hcall() is used to issue a load or store to the ESB page
instead of using the MMIO pages. This can be used as a workaround on
some HW issues. The OS knows that this hcall should be used on an
interrupt source when the ESB hcall flag is set to 1 in the hcall
H_INT_GET_SOURCE_INFO.

To maintain the frontier between the xive frontend and backend, we
introduce a new xive operation 'esb_rw' to be used in the routines
doing memory accesses on the ESBs.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-09-02 21:02:37 +10:00
Cédric Le Goater
c58a14a9cc powerpc/xive: add the HW IRQ number under xive_irq_data
It will be required later by the H_INT_ESB hcall.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-09-02 21:02:37 +10:00
Cédric Le Goater
eac1e731b5 powerpc/xive: guest exploitation of the XIVE interrupt controller
This is the framework for using XIVE in a PowerVM guest. The support
is very similar to the native one in a much simpler form.

Each source is associated with an Event State Buffer (ESB). This is a
two bit state machine which is used to trigger events. The bits are
named "P" (pending) and "Q" (queued) and can be controlled by MMIO.
The Guest OS registers event (or notifications) queues on which the HW
will post event data for a target to notify.

Instead of OPAL calls, a set of Hypervisors call are used to configure
the interrupt sources and the event/notification queues of the guest:

 - H_INT_GET_SOURCE_INFO

   used to obtain the address of the MMIO page of the Event State
   Buffer (PQ bits) entry associated with the source.

 - H_INT_SET_SOURCE_CONFIG

   assigns a source to a "target".

 - H_INT_GET_SOURCE_CONFIG

   determines to which "target" and "priority" is assigned to a source

 - H_INT_GET_QUEUE_INFO

   returns the address of the notification management page associated
   with the specified "target" and "priority".

 - H_INT_SET_QUEUE_CONFIG

   sets or resets the event queue for a given "target" and "priority".
   It is also used to set the notification config associated with the
   queue, only unconditional notification for the moment.  Reset is
   performed with a queue size of 0 and queueing is disabled in that
   case.

 - H_INT_GET_QUEUE_CONFIG

   returns the queue settings for a given "target" and "priority".

 - H_INT_RESET

   resets all of the partition's interrupt exploitation structures to
   their initial state, losing all configuration set via the hcalls
   H_INT_SET_SOURCE_CONFIG and H_INT_SET_QUEUE_CONFIG.

 - H_INT_SYNC

   issue a synchronisation on a source to make sure sure all
   notifications have reached their queue.

As for XICS, the XIVE interface for the guest is described in the
device tree under the "interrupt-controller" node. A couple of new
properties are specific to XIVE :

 - "reg"

   contains the base address and size of the thread interrupt
   managnement areas (TIMA), also called rings, for the User level and
   for the Guest OS level. Only the Guest OS level is taken into
   account today.

 - "ibm,xive-eq-sizes"

   the size of the event queues. One cell per size supported, contains
   log2 of size, in ascending order.

 - "ibm,xive-lisn-ranges"

   the interrupt numbers ranges assigned to the guest. These are
   allocated using a simple bitmap.

and also :

 - "/ibm,plat-res-int-priorities"

   contains a list of priorities that the hypervisor has reserved for
   its own use.

Tested with a QEMU XIVE model for pseries and with the Power hypervisor.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-09-02 21:02:35 +10:00
Haren Myneni
146e9f1b65 crypto/nx: Add P9 NX specific error codes for 842 engine
This patch adds changes for checking P9 specific 842 engine
error codes. These errros are reported in coprocessor status
block (CSB) for failures.

Signed-off-by: Haren Myneni <haren@us.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-09-01 16:42:50 +10:00
Christophe Leroy
da74f65920 powerpc/32: add memset16()
Commit 694fc88ce2 ("powerpc/string: Implement optimized
memset variants") added memset16(), memset32() and memset64()
for the 64 bits PPC.

On 32 bits, memset64() is not relevant, and as shown below,
the generic version of memset32() gives a good code, so only
memset16() is candidate for an optimised version.

000009c0 <memset32>:
 9c0:   2c 05 00 00     cmpwi   r5,0
 9c4:   39 23 ff fc     addi    r9,r3,-4
 9c8:   4d 82 00 20     beqlr
 9cc:   7c a9 03 a6     mtctr   r5
 9d0:   94 89 00 04     stwu    r4,4(r9)
 9d4:   42 00 ff fc     bdnz    9d0 <memset32+0x10>
 9d8:   4e 80 00 20     blr

The last part of memset() handling the not 4-bytes multiples
operates on bytes, making it unsuitable for handling word without
modification. As it would increase memset() complexity, it is
better to implement memset16() from scratch. In addition it
has the advantage of allowing a more optimised memset16() than what
we would have by using the memset() function.

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-09-01 16:42:45 +10:00
Paul Mackerras
d2b65ac652 powerpc: Emulate load/store floating point as integer word instructions
This adds emulation for the lfiwax, lfiwzx and stfiwx instructions.
This necessitated adding a new flag to indicate whether a floating
point or an integer conversion was needed for LOAD_FP and STORE_FP,
so this moves the size field in op->type up 4 bits.

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-09-01 16:42:44 +10:00
Paul Mackerras
a53d5182e2 powerpc: Separate out load/store emulation into its own function
This moves the parts of emulate_step() that deal with emulating
load and store instructions into a new function called
emulate_loadstore().  This is to make it possible to reuse this
code in the alignment handler.

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-09-01 16:42:41 +10:00
Paul Mackerras
d955189ae4 powerpc: Handle opposite-endian processes in emulation code
This adds code to the load and store emulation code to byte-swap
the data appropriately when the process being emulated is set to
the opposite endianness to that of the kernel.

This also enables the emulation for the multiple-register loads
and stores (lmw, stmw, lswi, stswi, lswx, stswx) to work for
little-endian.  In little-endian mode, the partial word at the
end of a transfer for lsw*/stsw* (when the byte count is not a
multiple of 4) is loaded/stored at the least-significant end of
the register.  Additionally, this fixes a bug in the previous
code in that it could call read_mem/write_mem with a byte count
that was not 1, 2, 4 or 8.

Note that this only works correctly on processors with "true"
little-endian mode, such as IBM POWER processors from POWER6 on, not
the so-called "PowerPC" little-endian mode that uses address swizzling
as implemented on the old 32-bit 603, 604, 740/750, 74xx CPUs.

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-09-01 16:39:55 +10:00
Paul Mackerras
b2543f7b20 powerpc: Emulate the dcbz instruction
This adds code to analyse_instr() and emulate_step() to understand the
dcbz (data cache block zero) instruction.  The emulate_dcbz() function
is made public so it can be used by the alignment handler in future.
(The apparently unnecessary cropping of the address to 32 bits is
there because it will be needed in that situation.)

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-09-01 16:39:54 +10:00
Paul Mackerras
c22435a5f3 powerpc: Emulate FP/vector/VSX loads/stores correctly when regs not live
At present, the analyse_instr/emulate_step code checks for the
relevant MSR_FP/VEC/VSX bit being set when a FP/VMX/VSX load
or store is decoded, but doesn't recheck the bit before reading or
writing the relevant FP/VMX/VSX register in emulate_step().

Since we don't have preemption disabled, it is possible that we get
preempted between checking the MSR bit and doing the register access.
If that happened, then the registers would have been saved to the
thread_struct for the current process.  Accesses to the CPU registers
would then potentially read stale values, or write values that would
never be seen by the user process.

Another way that the registers can become non-live is if a page
fault occurs when accessing user memory, and the page fault code
calls a copy routine that wants to use the VMX or VSX registers.

To fix this, the code for all the FP/VMX/VSX loads gets restructured
so that it forms an image in a local variable of the desired register
contents, then disables preemption, checks the MSR bit and either
sets the CPU register or writes the value to the thread struct.
Similarly, the code for stores checks the MSR bit, copies either the
CPU register or the thread struct to a local variable, then reenables
preemption and then copies the register image to memory.

If the instruction being emulated is in the kernel, then we must not
use the register values in the thread_struct.  In this case, if the
relevant MSR enable bit is not set, then emulate_step refuses to
emulate the instruction.

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-09-01 16:39:52 +10:00
Paul Mackerras
d120cdbce6 powerpc/64: Fix update forms of loads and stores to write 64-bit EA
When a 64-bit processor is executing in 32-bit mode, the update forms
of load and store instructions are required by the architecture to
write the full 64-bit effective address into the RA register, though
only the bottom 32 bits are used to address memory.  Currently,
the instruction emulation code writes the truncated address to the
RA register.  This fixes it by keeping the full 64-bit EA in the
instruction_op structure, truncating the address in emulate_step()
where it is used to address memory, rather than in the address
computations in analyse_instr().

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-09-01 16:39:49 +10:00
Paul Mackerras
350779a29f powerpc: Handle most loads and stores in instruction emulation code
This extends the instruction emulation infrastructure in sstep.c to
handle all the load and store instructions defined in the Power ISA
v3.0, except for the atomic memory operations, ldmx (which was never
implemented), lfdp/stfdp, and the vector element load/stores.

The instructions added are:

Integer loads and stores: lbarx, lharx, lqarx, stbcx., sthcx., stqcx.,
lq, stq.

VSX loads and stores: lxsiwzx, lxsiwax, stxsiwx, lxvx, lxvl, lxvll,
lxvdsx, lxvwsx, stxvx, stxvl, stxvll, lxsspx, lxsdx, stxsspx, stxsdx,
lxvw4x, lxsibzx, lxvh8x, lxsihzx, lxvb16x, stxvw4x, stxsibx, stxvh8x,
stxsihx, stxvb16x, lxsd, lxssp, lxv, stxsd, stxssp, stxv.

These instructions are handled both in the analyse_instr phase and in
the emulate_step phase.

The code for lxvd2ux and stxvd2ux has been taken out, as those
instructions were never implemented in any processor and have been
taken out of the architecture, and their opcodes have been reused for
other instructions in POWER9 (lxvb16x and stxvb16x).

The emulation for the VSX loads and stores uses helper functions
which don't access registers or memory directly, which can hopefully
be reused by KVM later.

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-09-01 16:39:48 +10:00
Paul Mackerras
3cdfcbfd32 powerpc: Change analyse_instr so it doesn't modify *regs
The analyse_instr function currently doesn't just work out what an
instruction does, it also executes those instructions whose effect
is only to update CPU registers that are stored in struct pt_regs.
This is undesirable because optprobes uses analyse_instr to work out
if an instruction could be successfully emulated in future.

This changes analyse_instr so it doesn't modify *regs; instead it
stores information in the instruction_op structure to indicate what
registers (GPRs, CR, XER, LR) would be set and what value they would
be set to.  A companion function called emulate_update_regs() can
then use that information to update a pt_regs struct appropriately.

As a minor cleanup, this replaces inline asm using the cntlzw and
cntlzd instructions with calls to __builtin_clz() and __builtin_clzl().

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-09-01 16:39:27 +10:00
Jérôme Glisse
fb1522e099 KVM: update to new mmu_notifier semantic v2
Calls to mmu_notifier_invalidate_page() were replaced by calls to
mmu_notifier_invalidate_range() and are now bracketed by calls to
mmu_notifier_invalidate_range_start()/end()

Remove now useless invalidate_page callback.

Changed since v1 (Linus Torvalds)
    - remove now useless kvm_arch_mmu_notifier_invalidate_page()

Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Tested-by: Mike Galbraith <efault@gmx.de>
Tested-by: Adam Borowski <kilobyte@angband.pl>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: kvm@vger.kernel.org
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-08-31 16:13:00 -07:00
Paul Mackerras
93b2d3cf37 powerpc: Correct instruction code for xxlor instruction
The instruction code for xxlor that commit 0016a4cf55 ("powerpc:
Emulate most Book I instructions in emulate_step()", 2010-06-15)
added is actually the code for xxlnor.  It is used in get_vsr()
and put_vsr() and the effect of the error is that if emulate_step
is used to emulate a VSX load or store from any register other
than vsr0, the bitwise complement of the correct value will be
loaded or stored.  This corrects the error.

Fixes: 0016a4cf55 ("powerpc: Emulate most Book I instructions in emulate_step()")
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-31 22:07:19 +10:00
Oliver O'Halloran
2a636a56d2 powerpc/smp: Add cpu_l2_cache_map
We want to add an extra level to the CPU scheduler topology to account
for cores which share a cache. To do this we need to build a cpumask
for each CPU that indicates which CPUs share this cache to use as an
input to the scheduler.

Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-31 14:26:56 +10:00
Tobin C. Harding
eb039161da powerpc/asm: Convert .llong directives to .8byte
.llong is an undocumented PPC specific directive. The generic
equivalent is .quad, but even better (because it's self describing) is
.8byte.

Convert all .llong directives to .8byte.

Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-31 14:26:47 +10:00
Balbir Singh
d1e1b351f5 powerpc/xmon: Add ISA v3.0 SPRs to SPR dump
Add support for printing the PIDR/TIDR for ISA 300 and PSSCR and PTCR
in ISA 3.0 hypervisor mode.

SPRN_PSSCR_PR is the privileged mode access and is used when we are
not in hypervisor mode.

Signed-off-by: Balbir Singh <bsingharora@gmail.com>
[mpe: Split out of larger patch]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-31 14:26:45 +10:00
Sukadev Bhattiprolu
2392c8c8c0 powerpc/powernv/vas: Define copy/paste interfaces
Define interfaces (wrappers) to the 'copy' and 'paste'
instructions (which are new in PowerISA 3.0). These are intended to be
used to by NX driver(s) to submit Coprocessor Request Blocks (CRBs) to
the NX hardware engines.

Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-31 14:26:38 +10:00
Sukadev Bhattiprolu
5239af679a powerpc/powernv/vas: Define vas_tx_win_open()
Define an interface to open a VAS send window. This interface is
intended to be used the Nest Accelerator (NX) driver(s) to open
a send window and use it to submit compression/encryption requests
to a VAS receive window.

The receive window, identified by the [vasid, cop] parameters, must
already be open in VAS (i.e connected to an NX engine).

Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-31 14:26:37 +10:00
Sukadev Bhattiprolu
98271d4198 powerpc/powernv/vas: Define vas_win_close() interface
Define the vas_win_close() interface which should be used to close a
send or receive windows.

While the hardware configurations required to open send and receive
windows differ, the configuration to close a window is the same for
both. So we use a single interface to close the window.

Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-31 14:26:37 +10:00
Sukadev Bhattiprolu
62c4eda4fa powerpc/powernv/vas: Define vas_rx_win_open() interface
Define the vas_rx_win_open() interface. This interface is intended to
be used by the Nest Accelerator (NX) driver(s) to setup receive
windows for one or more NX engines (which implement compression &
encryption algorithms in the hardware).

Follow-on patches will provide an interface to close the window and to
open a send window that kernel subsystems can use to access the NX
engines.

The interface to open a receive window is expected to be invoked for
each instance of VAS in the system.

Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-31 14:26:36 +10:00
Sukadev Bhattiprolu
b6622a339e powerpc/powernv: Move GET_FIELD/SET_FIELD to vas.h
Move the GET_FIELD and SET_FIELD macros to vas.h as VAS and other
users of VAS, including NX-842 can use those macros.

There is a lot of related code between the VAS/NX kernel drivers
and skiboot. For consistency, switch the order of parameters in
SET_FIELD to match the order in skiboot.

Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Reviewed-by: Dan Streetman <ddstreet@ieee.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-31 14:26:20 +10:00
Sukadev Bhattiprolu
967689141e powerpc/powernv/vas: Define macros, register fields and structures
Define macros for the VAS hardware registers and bit-fields as well
as couple of data structures needed by the VAS driver.

Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
[mpe: Fixup include guard to use _ASM_POWERPC_VAS_H]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-31 14:26:17 +10:00
Alexey Kardashevskiy
f1e08232ed powerpc/pci: Remove OF node back pointer from pci_dn
The check_req() helper uses pci_get_pdn() to get an OF node pointer.
pci_get_pdn() returns a pci_dn pointer which either:
1) from the OF node returned by pci_device_to_OF_node();
2) from the parent child_list where entries don't have OF node pointers.
Since check_req() does not care about 2), it can call
pci_device_to_OF_node() directly, hence the change.

The find_pe_dn() helper uses embedded pci_dn to get an OF node which is
also stored in edev->pdev so let's take a shortcut and call
pci_device_to_OF_node() directly.

With these 2 changes, we can finally get rid of the OF node back pointer.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-31 14:26:12 +10:00
Alexey Kardashevskiy
405b33a76d powerpc/eeh: Remove unnecessary config_addr from eeh_dev
The eeh_dev struct hold a config space address of an associated node
and the very same address is also stored in the pci_dn struct which
is always present during the eeh_dev lifetime.

This uses bus:devfn directly from pci_dn instead of cached and packed
config_addr.

Since config_addr is made from device's bus:dev.fn, there is no point
in keeping it in the debugfs either so remove that too.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-31 14:26:09 +10:00
Alexey Kardashevskiy
69672bd748 powerpc/eeh: Remove unnecessary pointer to phb from eeh_dev
The eeh_dev struct already holds a pointer to pci_dn which it does not
exist without and pci_dn itself holds the very same pointer so just
use it.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-31 14:26:09 +10:00
Alexey Kardashevskiy
8bae6a2319 powerpc/eeh: Reduce to one the number of places where edev is allocated
arch/powerpc/kernel/eeh_dev.c:57 is the only legit place where edev
is allocated; other 2 places allocate it on stack and in the heap for
a very short period of time to use eeh_pe_get() as takes edev.

This changes eeh_pe_get() to receive required parameters explicitly.

This removes unnecessary temporary allocation of edev.

This uses the "pe_no" name instead of the "pe_config_addr" name as
it actually is a PE number and not a config space address as it seemed.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
Acked-by: Russell Currey <ruscur@russell.cc>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-31 14:26:08 +10:00
Nicholas Piggin
6fcd6baa90 powerpc/powernv: Use kernel crash path for machine checks
There are quite a few machine check exceptions that can be caused by
kernel bugs. To make debugging easier, use the kernel crash path in
cases of synchronous machine checks that occur in kernel mode, if that
would not result in the machine going straight to panic or crash dump.

There is a downside here that die()ing the process in kernel mode can
still leave the system unstable. panic_on_oops will always force the
system to fail-stop, so systems where that behaviour is important will
still do the right thing.

As a test, when triggering an i-side 0111b error (ifetch from foreign
address) in kernel mode process context on POWER9, the kernel currently
dies quickly like this:

  Severe Machine check interrupt [Not recovered]
    NIP [ffff000000000000]: 0xffff000000000000
    Initiator: CPU
    Error type: Real address [Instruction fetch (foreign)]
  [  127.426651616,0] OPAL: Reboot requested due to Platform error.
      Effective[  127.426693712,3] OPAL: Reboot requested due to Platform error. address: ffff000000000000
  opal: Reboot type 1 not supported
  Kernel panic - not syncing: PowerNV Unrecovered Machine Check
  CPU: 56 PID: 4425 Comm: syscall Tainted: G   M            4.12.0-rc1-13857-ga4700a261072-dirty #35
  Call Trace:
  [  128.017988928,4] IPMI: BUG: Dropping ESEL on the floor due to
    buggy/mising code in OPAL for this BMC
    Rebooting in 10 seconds..
  Trying to free IRQ 496 from IRQ context!

After this patch, the process is killed and the kernel continues with
this message, which gives enough information to identify the offending
branch (i.e., with CFAR):

  Severe Machine check interrupt [Not recovered]
    NIP [ffff000000000000]: 0xffff000000000000
    Initiator: CPU
    Error type: Real address [Instruction fetch (foreign)]
      Effective address: ffff000000000000
  Oops: Machine check, sig: 7 [#1]
  SMP NR_CPUS=2048
  NUMA
  PowerNV
  Modules linked in: iptable_mangle ipt_MASQUERADE nf_nat_masquerade_ipv4 ...
  CPU: 22 PID: 4436 Comm: syscall Tainted: G   M            4.12.0-rc1-13857-ga4700a261072-dirty #36
  task: c000000932300000 task.stack: c000000932380000
  NIP: ffff000000000000 LR: 00000000217706a4 CTR: ffff000000000000
  REGS: c00000000fc8fd80 TRAP: 0200   Tainted: G   M             (4.12.0-rc1-13857-ga4700a261072-dirty)
  MSR: 90000000001c1003 <SF,HV,ME,RI,LE>
    CR: 24000484  XER: 20000000
  CFAR: c000000000004c80 DAR: 0000000021770a90 DSISR: 0a000000 SOFTE: 1
  GPR00: 0000000000001ebe 00007fffce4818b0 0000000021797f00 0000000000000000
  GPR04: 00007fff8007ac24 0000000044000484 0000000000004000 00007fff801405e8
  GPR08: 900000000280f033 0000000024000484 0000000000000000 0000000000000030
  GPR12: 9000000000001003 00007fff801bc370 0000000000000000 0000000000000000
  GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
  GPR20: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
  GPR24: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
  GPR28: 00007fff801b0000 0000000000000000 00000000217707a0 00007fffce481918
  NIP [ffff000000000000] 0xffff000000000000
  LR [00000000217706a4] 0x217706a4
  Call Trace:
  Instruction dump:
  XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
  XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-31 14:26:04 +10:00
Nicholas Piggin
b746e3e01e powerpc/powernv: Flush console before platform error reboot
Unrecovered MCE and HMI errors are sent through a special restart OPAL
call to log the platform error. The downside is that they don't go
through normal Linux crash paths, so they don't give much information
to the Linux console.

Change this by providing a special crash function which does some of
the console flushing from the panic() path before calling firmware to
reboot.

The downside of this is a little more code to execute before reaching
the firmware reboot. However in practice, it's critical to get the
Linux console messages output in order to debug a problem. So this is
a desirable tradeoff.

Note on the implementation: It is difficult to plumb a custom reboot
handler into the panic path, because panic does a little bit too much
work. For example, it will try to delay with the timebase, but that
may be corrupted in some cases resulting in a hang without reaching
the platform reboot. Another problem is that panic can invoke the
crash dump code which is not what we want in the case of a hardware
platform error. Long-term the best solution will be to rework the
panic path so it can be suitable for this kind of panic, but for now
we just duplicate a bit of the code.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-31 14:26:03 +10:00
Nicholas Piggin
a3b2cb30f2 powerpc: Do not call ppc_md.panic in fadump panic notifier
If fadump is not registered, and no other crash or debug handlers are
registered, the powerpc panic handler stops the guest before the
generic panic code can push out debug information to the console.

Currently, system reset injection causes the guest to silently stop.

Stop calling ppc_md.panic in the panic notifier. crash_fadump already
does rtas_os_term() to terminate the guest if fadump is registered.

Remove ppc_md.panic. Move fadump panic notifier into fadump code.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-31 14:26:01 +10:00
Nicholas Piggin
70412c55d4 powerpc/64: Fix watchdog configuration regressions
This fixes a couple more bits of fallout from the new hard lockup watchdog
patch.

It restores the required hw_nmi_get_sample_period() function for the
perf watchdog, and removes some function declarations on 64e that are only
defined for 64s. This fixes the 64e build when the hardlockup detector is
enabled.

It restores the default behaviour of disabling the perf watchdog, and also
fixes disabling the 64s watchdog when running as a guest.

Fixes: 2104180a53 ("powerpc/64s: implement arch-specific hardlockup watchdog")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-31 14:26:00 +10:00
Paul Mackerras
4dafecde44 Merge remote-tracking branch 'remotes/powerpc/topic/ppc-kvm' into kvm-ppc-next
This merges in the 'ppc-kvm' topic branch from the powerpc tree in
order to bring in some fixes which touch both powerpc and KVM code.

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2017-08-31 12:37:03 +10:00
Ram Pai
d182b8fd60 KVM: PPC: Book3S HV: Fix setting of storage key in H_ENTER
In handling a H_ENTER hypercall, the code in kvmppc_do_h_enter
clobbers the high-order two bits of the storage key, which is stored
in a split field in the second doubleword of the HPTE.  Any storage
key number above 7 hence fails to operate correctly.

This makes sure we preserve all the bits of the storage key.

Acked-by: Balbir Singh <bsingharora@gmail.com>
Signed-off-by: Ram Pai <linuxram@us.ibm.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2017-08-31 12:36:44 +10:00
Nicholas Piggin
aafc8a8300 powerpc/64s: Move IDLE_STATE_ENTER_SEQ[_NORET] into idle_book3s.S
This macro is only used in idle_book3s.S, move it in there and add a
more descriptive comment.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Split out of larger patch and write change log]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-29 21:38:47 +10:00
Michael Ellerman
82b7fcc005 Merge branch 'topic/ppc-kvm' into next
Merge Nicks commit to rework the KVM thread management, shared with the
KVM tree via the ppc-kvm topic branch.
2017-08-29 21:26:30 +10:00
Nicholas Piggin
94a04bc25a KVM: PPC: Book3S HV: POWER9 does not require secondary thread management
POWER9 CPUs have independent MMU contexts per thread, so KVM does not
need to quiesce secondary threads, so the hwthread_req/hwthread_state
protocol does not have to be used. So patch it away on POWER9, and patch
away the branch from the Linux idle wakeup to kvm_start_guest that is
never used.

Add a warning and error out of kvmppc_grab_hwthread in case it is ever
called on POWER9.

This avoids a hwsync in the idle wakeup path on POWER9.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Acked-by: Paul Mackerras <paulus@ozlabs.org>
[mpe: Use WARN(...) instead of WARN_ON()/pr_err(...)]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-29 14:48:59 +10:00
Linus Torvalds
42e6d5e5ee powerpc fixes for 4.13 #8
Just one fix, to add a barrier in the switch_mm() code to make sure the mm
 cpumask update is ordered vs the MMU starting to load translations. As far as we
 know no one's actually hit the bug, but that's just luck.
 
 Thanks to:
   Benjamin Herrenschmidt, Nicholas Piggin.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJZoAZDAAoJEFHr6jzI4aWAi3AQAJq4boEBqdmL042oNK4PWW0M
 uGfehNmtzCw9Hp8bPfzOf8NypJ51Kw7eDQELaeSaazKW+gffUCBeEsKGS7kmHvc+
 x1tHxkXxI7PXuNIRojJg9y7rlKXdRym5SecvPSo1cm/c46RRWOlNGZaIwiHyrXSh
 eBjyP5EHu1HXpRxkcUh+//PQp2b+7SmgUYzSf0hA9UCtzSZSJr19DuY8uhetI9Ws
 AfjkO1uvb2KETqBVegGBpAruZzQtxqdtffd2HToSaCHUnAKma2iqUZqkqBNjL6OQ
 gSXWpXVInng/7ktrrfEgSiwlHns7pgHkxYHS8thDZqQpIt3GNsUg2UwpHGf6oL7V
 L+GtRp36LM91Ueq6KdlU7bJkmoiJ798Hnp3FOjpkqo+j/MGuCQDDDK4Ge1popehJ
 a17K7lE/FKGqNaFINc1Q6hnXg4MPyawAOLDlV839Ap5+ISPS6WcHaa1AgKjdQNkH
 fIkZZsYT531FIf853AjUGFw8frSlVfrHmIx9/HJOhEa1KHQhBqGRV1sWYEjuN6IB
 av+tQDlleG5aT641qhHlA/hN5DGrGZXLp8e6cFRufF+CSsRayL27u0Qw9pP9VZ3S
 bgfdnmZZyP23+bzaq/m/bjhRiOf0snSQPxIKe56KmNCJ8buTrGWDw4IuiPKB7Y6V
 06vBFn7ZUP5aeHIZkS62
 =IClj
 -----END PGP SIGNATURE-----

Merge tag 'powerpc-4.13-8' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux

Pull powerpc fix from Michael Ellerman:
 "Just one fix, to add a barrier in the switch_mm() code to make sure
  the mm cpumask update is ordered vs the MMU starting to load
  translations. As far as we know no one's actually hit the bug, but
  that's just luck.

  Thanks to Benjamin Herrenschmidt, Nicholas Piggin"

* tag 'powerpc-4.13-8' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/mm: Ensure cpumask update is ordered
2017-08-25 17:32:35 -07:00
Jiri Slaby
30d6e0a419 futex: Remove duplicated code and fix undefined behaviour
There is code duplicated over all architecture's headers for
futex_atomic_op_inuser. Namely op decoding, access_ok check for uaddr,
and comparison of the result.

Remove this duplication and leave up to the arches only the needed
assembly which is now in arch_futex_atomic_op_inuser.

This effectively distributes the Will Deacon's arm64 fix for undefined
behaviour reported by UBSAN to all architectures. The fix was done in
commit 5f16a046f8 (arm64: futex: Fix undefined behaviour with
FUTEX_OP_OPARG_SHIFT usage). Look there for an example dump.

And as suggested by Thomas, check for negative oparg too, because it was
also reported to cause undefined behaviour report.

Note that s390 removed access_ok check in d12a29703 ("s390/uaccess:
remove pointless access_ok() checks") as access_ok there returns true.
We introduce it back to the helper for the sake of simplicity (it gets
optimized away anyway).

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Russell King <rmk+kernel@armlinux.org.uk>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> [s390]
Acked-by: Chris Metcalf <cmetcalf@mellanox.com> [for tile]
Reviewed-by: Darren Hart (VMware) <dvhart@infradead.org>
Reviewed-by: Will Deacon <will.deacon@arm.com> [core/arm64]
Cc: linux-mips@linux-mips.org
Cc: Rich Felker <dalias@libc.org>
Cc: linux-ia64@vger.kernel.org
Cc: linux-sh@vger.kernel.org
Cc: peterz@infradead.org
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: sparclinux@vger.kernel.org
Cc: Jonas Bonn <jonas@southpole.se>
Cc: linux-s390@vger.kernel.org
Cc: linux-arch@vger.kernel.org
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: linux-hexagon@vger.kernel.org
Cc: Helge Deller <deller@gmx.de>
Cc: "James E.J. Bottomley" <jejb@parisc-linux.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: linux-snps-arc@lists.infradead.org
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: linux-xtensa@linux-xtensa.org
Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
Cc: openrisc@lists.librecores.org
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Stafford Horne <shorne@gmail.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Richard Henderson <rth@twiddle.net>
Cc: Chris Zankel <chris@zankel.net>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Tony Luck <tony.luck@intel.com>
Cc: linux-parisc@vger.kernel.org
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Richard Kuo <rkuo@codeaurora.org>
Cc: linux-alpha@vger.kernel.org
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: linuxppc-dev@lists.ozlabs.org
Cc: "David S. Miller" <davem@davemloft.net>
Link: http://lkml.kernel.org/r/20170824073105.3901-1-jslaby@suse.cz
2017-08-25 22:49:59 +02:00
Benjamin Herrenschmidt
3a2df3798d powerpc/mm: Make switch_mm_irqs_off() out of line
It's too big to be inline, there is no reason to keep it
that way.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
[mpe: Rework to incorporate the comment changes via fixes branch]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-23 22:48:51 +10:00
Benjamin Herrenschmidt
a619e59c07 powerpc/mm: Optimize detection of thread local mm's
Instead of comparing the whole CPU mask every time, let's
keep a counter of how many bits are set in the mask. Thus
testing for a local mm only requires testing if that counter
is 1 and the current CPU bit is set in the mask.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-23 22:28:38 +10:00
Benjamin Herrenschmidt
058ccc3465 powerpc/mm: Avoid double irq save/restore in activate_mm
It calls switch_mm() which already does the irq save/restore
these days.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-23 22:27:44 +10:00
Benjamin Herrenschmidt
43ed84a891 powerpc/mm: Move pgdir setting into a helper
Makes switch_mm_irqs_off() a bit more readable

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-23 22:27:42 +10:00
Michael Ellerman
15c659ff9d Merge branch 'fixes' into next
There's a non-trivial dependency between some commits we want to put in
next and the KVM prefetch work around that went into fixes. So merge
fixes into next.
2017-08-23 22:20:10 +10:00
Ingo Molnar
94edf6f3c2 Merge branch 'for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu into core/rcu
Pull RCU updates from Paul E. McKenney:

 - Removal of spin_unlock_wait()
 - SRCU updates
 - Torture-test updates
 - Documentation updates
 - Miscellaneous fixes
 - CPU-hotplug fixes
 - Miscellaneous non-RCU fixes

Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-08-21 09:45:19 +02:00
Benjamin Herrenschmidt
1a92a80ad3 powerpc/mm: Ensure cpumask update is ordered
There is no guarantee that the various isync's involved with
the context switch will order the update of the CPU mask with
the first TLB entry for the new context being loaded by the HW.

Be safe here and add a memory barrier to order any subsequent
load/store which may bring entries into the TLB.

The corresponding barrier on the other side already exists as
pte updates use pte_xchg() which uses __cmpxchg_u64 which has
a sync after the atomic operation.

Cc: stable@vger.kernel.org
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Add comments in the code]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-18 13:07:16 +10:00
Paul E. McKenney
952111d7db arch: Remove spin_unlock_wait() arch-specific definitions
There is no agreed-upon definition of spin_unlock_wait()'s semantics,
and it appears that all callers could do just as well with a lock/unlock
pair.  This commit therefore removes the underlying arch-specific
arch_spin_unlock_wait() for all architectures providing them.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: <linux-arch@vger.kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Andrea Parri <parri.andrea@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: Will Deacon <will.deacon@arm.com>
Acked-by: Boqun Feng <boqun.feng@gmail.com>
2017-08-17 08:08:59 -07:00
Aneesh Kumar K.V
fa4531f753 powerpc/mm: Don't send IPI to all cpus on THP updates
Now that we made sure that lockless walk of linux page table is mostly
limitted to current task(current->mm->pgdir) we can update the THP
update sequence to only send IPI to CPUs on which this task has run.
This helps in reducing the IPI overload on systems with large number
of CPUs.

WRT kvm even though kvm is walking page table with vpc->arch.pgdir,
it is done only on secondary CPUs and in that case we have primary CPU
added to task's mm cpumask. Sending an IPI to primary will force the
secondary to do a vm exit and hence this mm cpumask usage is safe
here.

WRT CAPI, we still end up walking linux page table with capi context
MM. For now the pte lookup serialization sends an IPI to all CPUs in
CPI is in use. We can further improve this by adding the CAPI
interrupt handling CPU to task mm cpumask. That will be done in a
later patch.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-17 23:31:13 +10:00
Michael Ellerman
8434f0892e Merge branch 'topic/ppc-kvm' into next
Bring in the commit to rename find_linux_pte_or_hugepte() which touches
arch and KVM code, and might need to be merged with the kvmppc tree to
avoid conflicts.
2017-08-17 23:14:17 +10:00
Aneesh Kumar K.V
94171b19c3 powerpc/mm: Rename find_linux_pte_or_hugepte()
Add newer helpers to make the function usage simpler. It is always
recommended to use find_current_mm_pte() for walking the page table.
If we cannot use find_current_mm_pte(), it should be documented why
the said usage of __find_linux_pte() is safe against a parallel THP
split.

For now we have KVM code using __find_linux_pte(). This is because kvm
code ends up calling __find_linux_pte() in real mode with MSR_EE=0 but
with PACA soft_enabled = 1. We may want to fix that later and make
sure we keep the MSR_EE and PACA soft_enabled in sync. When we do that
we can switch kvm to use find_linux_pte().

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-17 23:13:46 +10:00
Naveen N. Rao
694fc88ce2 powerpc/string: Implement optimized memset variants
Based on Matthew Wilcox's patches for other architectures.

Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-17 23:04:35 +10:00
Dou Liyang
7baebe54a6 powerpc/topology: Remove the unused parent_node() macro
Commit a7be6e5a7f ("mm: drop useless local parameters of
__register_one_node()") removes the last user of parent_node().

The parent_node() macro in POWERPC platform is unnecessary.

Remove it for cleanup.

Reported-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Dou Liyang <douly.fnst@cn.fujitsu.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-16 21:12:41 +10:00
Aneesh Kumar K.V
4ae279c2c9 powerpc/mm/hugetlb: Allow runtime allocation of 16G.
Now that we have GIGANTIC_PAGE enabled on powerpc, use this for 16G hugepages
with hash translation mode. Depending on the total system memory we have, we may
be able to allocate 16G hugepages runtime. This also remove the hugetlb setup
difference between hash/radix translation mode.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-16 14:56:13 +10:00
Aneesh Kumar K.V
79cc38ded1 powerpc/mm/hugetlb: Add support for reserving gigantic huge pages via kernel command line
With commit aa888a7497 ("hugetlb: support larger than MAX_ORDER") we added
support for allocating gigantic hugepages via kernel command line. Switch
ppc64 arch specific code to use that.

W.r.t FSL support, we now limit our allocation range using BOOTMEM_ALLOC_ACCESSIBLE.

We use the kernel command line to do reservation of hugetlb pages on powernv
platforms. On pseries hash mmu mode the supported gigantic huge page size is
16GB and that can only be allocated with hypervisor assist. For pseries the
command line option doesn't do the allocation. Instead pseries does gigantic
hugepage allocation based on hypervisor hint that is specified via
"ibm,expected#pages" property of the memory node.

Cc: Scott Wood <oss@buserror.net>
Cc: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-16 14:56:12 +10:00
Christophe Leroy
ca8afd4046 powerpc/hugetlb: fix page rights verification in gup_hugepte()
gup_hugepte() checks if pages are present and readable, and
when  'write' is set, also checks if the pages are writable.

Initially this was done by checking if _PAGE_PRESENT and
_PAGE_READ were set. In addition, _PAGE_WRITE was verified for write
accesses.

The problem is that we have to handle the three following cases:
1/ The target defines __PAGE_READ and __PAGE_WRITE
2/ The target defines __PAGE_RW
3/ The target defines __PAGE_RO

In case 1/, this is obvious
In case 2/, __PAGE_READ is defined as 0 and __PAGE_WRITE as __PAGE_RW
so it works as well.
But in case 3, __PAGE_RW is defined as 0, which means __PAGE_WRITE is 0
and then the test returns true (page writable) in all cases.

A first correction was attempted in commit 6b8cb66a6a ("powerpc: Fix
usage of _PAGE_RO in hugepage"), but that fix is wrong:
instead of checking that the page is writable when write is requested,
it checks that the page is NOT writable when write is NOT requested.

This patch adds a new pte_read() helper to check whether a page is
readable or not. This avoids handling all possible cases in
gup_hugepte().

Then gup_hugepte() is modified to use pte_present(), pte_read()
and pte_write() instead of the raw flags.

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-15 22:55:58 +10:00
Christophe Leroy
4cfac2f9c7 powerpc/mm: Simplify __set_fixmap()
__set_fixmap() uses __fix_to_virt() then does the boundary checks
by it self. Instead, we can use fix_to_virt() which does the
verification at build time. For this, we need to use it inline
so that GCC can see the real value of idx at buildtime.

In the meantime, we remove the 'fixmaps' variable.
This variable is set but has never been used from the beginning
(commit 2c419bdeca ("[POWERPC] Port fixmap from x86 and use
for kmap_atomic"))

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-15 22:55:58 +10:00
Christophe Leroy
86b19520e7 powerpc/mm: declare some local functions static
get_pteptr() and __mapin_ram_chunk() are only used locally,
so define them static

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-15 22:55:57 +10:00
Christophe Leroy
3184cc4b6f powerpc/mm: Fix kernel RAM protection after freeing unused memory on PPC32
As seen below, allthough the init sections have been freed, the
associated memory area is still marked as executable in the
page tables.

~ dmesg
[    5.860093] Freeing unused kernel memory: 592K (c0570000 - c0604000)

~ cat /sys/kernel/debug/kernel_page_tables
---[ Start of kernel VM ]---
0xc0000000-0xc0497fff        4704K  rw  X  present dirty accessed shared
0xc0498000-0xc056ffff         864K  rw     present dirty accessed shared
0xc0570000-0xc059ffff         192K  rw  X  present dirty accessed shared
0xc05a0000-0xc7ffffff      125312K  rw     present dirty accessed shared
---[ vmalloc() Area ]---

This patch fixes that.

The implementation is done by reusing the change_page_attr()
function implemented for CONFIG_DEBUG_PAGEALLOC

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-15 22:55:56 +10:00
Michael Ellerman
5b6c133e08 powerpc/mm/nohash: Move definition of PGALLOC_GFP to fix build errors
In some obscure Book3E configs (randconfig) we can end up missing a
definition for PGALLOC_GFP in pgtable_64.c.

Fix it by moving the definition to asm/pgalloc.h.

Fixes: de3b87611d ("powerpc/mm/book(e)(3s)/64: Add page table accounting")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-15 20:02:56 +10:00
Christophe Leroy
3ee87674e0 powerpc/8xx: Use symbolic PVR value
For the 8xx, PVR values defined in arch/powerpc/include/asm/reg.h
are nowhere used.

Remove all defines and add PVR_8xx

Use it in arch/powerpc/kernel/cputable.c

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-10 23:32:18 +10:00
Christophe Leroy
968159c003 powerpc/8xx: Getting rid of remaining use of CONFIG_8xx
Two config options exist to define powerpc MPC8xx:
* CONFIG_PPC_8xx
* CONFIG_8xx

arch/powerpc/platforms/Kconfig.cputype has contained the following
comment about CONFIG_8xx item for some years:
"# this is temp to handle compat with arch=ppc"

arch/powerpc is now the only place with remaining use of
CONFIG_8xx: get rid of them.

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-10 23:32:12 +10:00
Christophe Leroy
72e4b2cdf0 powerpc/time: refactor MFTB() to limit number of ifdefs
The 8xx cannot access the TBL and TBU registers using mfspr/mtspr
It must be accessed using mftb/mftbu

Due to this, there is a number of places with #ifdef CONFIG_8xx

This patch defines new macros MFTBL(x) and MFTBU(x) on the same model
as MFTB(x) and tries to make use of them as much as possible.

In arch/powerpc/include/asm/timex.h, we also remove the ifdef
for the asm() operands as the compiler doesn't mind unused operands

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-10 23:32:09 +10:00
Michael Ellerman
d30a5a5262 powerpc/traps: Use SRR1 defines for program check reasons
Currently we open code the reason codes for program checks. Instead use
the existing SRR1 defines.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-10 23:31:32 +10:00
Shilpasri G Bhat
bf9571550f powerpc/powernv: Add support to clear sensor groups data
Adds support for clearing different sensor groups. OCC inband sensor
groups like CSM, Profiler, Job Scheduler can be cleared using this
driver. The min/max of all sensors belonging to these sensor groups
will be cleared.

Signed-off-by: Shilpasri G Bhat <shilpa.bhat@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-10 22:40:05 +10:00
Shilpasri G Bhat
8e84b2d1f0 powerpc/powernv: Add support to set power-shifting-ratio
This patch adds support to set power-shifting-ratio which hints the
firmware how to distribute/throttle power between different entities
in a system (e.g CPU v/s GPU). This ratio is used by OCC for power
capping algorithm.

Signed-off-by: Shilpasri G Bhat <shilpa.bhat@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-10 22:40:01 +10:00
Shilpasri G Bhat
cb8b340de2 powerpc/powernv: Add support for powercap framework
Adds a generic powercap framework to change the system powercap
inband through OPAL-OCC command/response interface.

Signed-off-by: Shilpasri G Bhat <shilpa.bhat@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-10 22:39:53 +10:00
Nicholas Piggin
04019bf8eb powerpc: Add irq accounting for watchdog interrupts
This adds an irq counter for the watchdog soft-NMI. This interrupt
only fires when interrupts are soft-disabled, so it will not
increment much even when the watchdog is running. However it's
useful for debugging and sanity checking.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-10 22:30:02 +10:00
Nicholas Piggin
ca41ad4377 powerpc: Add irq accounting for system reset interrupts
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-10 22:30:01 +10:00
Andreas Schwab
8a583c0a8d powerpc: Fix invalid use of register expressions
binutils >= 2.26 now warns about misuse of register expressions in
assembler operands that are actually literals, for example:

  arch/powerpc/kernel/entry_64.S:535: Warning: invalid register expression

In practice these are almost all uses of r0 that should just be a
literal 0.

Signed-off-by: Andreas Schwab <schwab@linux-m68k.org>
[mpe: Mention r0 is almost always the culprit, fold in purgatory change]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-10 22:29:41 +10:00
Peter Zijlstra
a9668cd6ee locking: Remove smp_mb__before_spinlock()
Now that there are no users of smp_mb__before_spinlock() left, remove
it entirely.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-08-10 12:29:03 +02:00
Peter Zijlstra
d89e588ca4 locking: Introduce smp_mb__after_spinlock()
Since its inception, our understanding of ACQUIRE, esp. as applied to
spinlocks, has changed somewhat. Also, I wonder if, with a simple
change, we cannot make it provide more.

The problem with the comment is that the STORE done by spin_lock isn't
itself ordered by the ACQUIRE, and therefore a later LOAD can pass over
it and cross with any prior STORE, rendering the default WMB
insufficient (pointed out by Alan).

Now, this is only really a problem on PowerPC and ARM64, both of
which already defined smp_mb__before_spinlock() as a smp_mb().

At the same time, we can get a much stronger construct if we place
that same barrier _inside_ the spin_lock(). In that case we upgrade
the RCpc spinlock to an RCsc.  That would make all schedule() calls
fully transitive against one another.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Will Deacon <will.deacon@arm.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Paul McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-08-10 12:29:02 +02:00
Michael Ellerman
21a0e8c14b powerpc/mm/hash64: Make vmalloc 56T on hash
On 64-bit book3s, with the hash MMU, we currently define the kernel
virtual space (vmalloc, ioremap etc.), to be 16T in size. This is a
leftover from pre v3.7 when our user VM was also 16T.

Of that 16T we split it 50/50, with half used for PCI IO and ioremap
and the other 8T for vmalloc.

We never bothered to make it any bigger because 8T of vmalloc ought to
be enough for anybody. But it turns out that's not true, the per cpu
allocator wants large amounts of vmalloc space, not to make large
allocations, but to allow a large stride between allocations, because
we use pcpu_embed_first_chunk().

With a bit of juggling we can increase the entire kernel virtual space
to 64T. The only real complication is the check of the address in the
SLB miss handler, see the comment in the code.

Although we could continue to split virtual space 50/50 as we do now,
no one seems to be running out of PCI IO or ioremap space. So instead
keep that as 8T, and use the remaining 56T for vmalloc.

In future we should be able to increase the kernel virtual space to
512T, the code already supports that, it just needs testing on older
hardware.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
2017-08-08 19:37:05 +10:00
Michael Ellerman
63ee9b2ff9 powerpc/mm/book3s64: Make KERN_IO_START a variable
Currently KERN_IO_START is defined as:

 #define KERN_IO_START  (KERN_VIRT_START + (KERN_VIRT_SIZE >> 1))

Although it looks like a constant, both the components are actually
variables, to allow us to have a different value between Radix and
Hash with a single kernel.

However that still requires both Radix and Hash to place the kernel IO
region at the same location relative to the start and end of the
kernel virtual region (namely 1/2 way through it), and we'd like to
change that.

So split KERN_IO_START out into its own variable, and initialise it
for Radix and Hash. In the medium term we should be able to
reconsolidate this, by doing a more involved rearrangement of the
location of the regions.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Acked-by: Balbir Singh <bsingharora@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-08 19:37:04 +10:00
Matt Brown
e66ca3db59 powerpc/powernv: Use darn instruction for get_random_seed() on Power9
This adds powernv_get_random_darn() which utilises the darn instruction,
introduced in ISA v3.0/POWER9.

The darn instruction can potentially return an error, which is supported
by the get_random_seed() API, in normal usage if we see an error we just
return that to the caller.

However when detecting whether darn is functional at boot we try up to
10 times, before deciding that darn doesn't work and failing the
registration of get_random_seed(). That way an intermittent failure
at boot doesn't deprive the system of randomness until the next reboot.

Signed-off-by: Matt Brown <matthew.brown.dev@gmail.com>
[mpe: Move init into a function, tweak change log]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-08 19:37:03 +10:00
Frederic Barrat
2552910084 powerpc/powernv: Enable PCI peer-to-peer
P9 has support for PCI peer-to-peer, enabling a device to write in the
MMIO space of another device directly, without interrupting the CPU.

This patch adds support for it on powernv, by adding a new API to be
called by drivers. The pnv_pci_set_p2p(...) call configures an
'initiator', i.e the device which will issue the MMIO operation, and a
'target', i.e. the device on the receiving side.

P9 really only supports MMIO stores for the time being but that's
expected to change in the future, so the API allows to define both
load and store operations.

  /* PCI p2p descriptor */
  #define OPAL_PCI_P2P_ENABLE           0x1
  #define OPAL_PCI_P2P_LOAD             0x2
  #define OPAL_PCI_P2P_STORE            0x4

  int pnv_pci_set_p2p(struct pci_dev *initiator, struct pci_dev *target,
                      u64 desc)

It uses a new OPAL call, as the configuration magic is done on the
PHBs by skiboot.

Signed-off-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com>
Reviewed-by: Russell Currey <ruscur@russell.cc>
[mpe: Drop unrelated OPAL calls, s/uint64_t/u64/, minor formatting]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-08 11:27:30 +10:00
Linus Torvalds
841fe95303 powerpc fixes for 4.13 #5
Fixes for recently merged code:
  - a fix for the _PAGE_DEVMAP support, which was breaking KVM on Power9 radix
  - avoid a (harmless) lockdep warning in the early SMP code
  - return failure for some uses of dma_set_mask() rather than falling back to 32-bits
  - fix stack setup in watchdog soft_nmi_common() to use emergency stack
  - fix of_irq_to_resource() error check in of_fsl_spi_probe()
 
 Two fixes going to stable:
  - fix saving of Transactional Memory SPRs in core dump
  - fix __check_irq_replay missing decrementer interrupt
 
 And two misc:
  - fix 64-bit boot wrapper build with non-biarch compiler
  - work around a POWER9 PMU hang after state-loss idle
 
 Thanks to:
   Alistair Popple, Aneesh Kumar K.V, Cyril Bur, Gustavo Romero, Jose Ricardo
   Ziviani, Laurent Vivier, Nicholas Piggin, Oliver O'Halloran, Sergei Shtylyov,
   Suraj Jitindar Singh, Thomas Gleixner.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJZhEH/AAoJEFHr6jzI4aWA8GoP+wdtaBYZIElFMnPay/BY8lSQ
 MODF6FlaexdNuVFo5In2BnMAs12bIXDO69wMziqc+uZIA+vI3K7lqsi+8p1R38Ts
 FG5OFLzX/gx1ykoeDe0mC8GPUHGVBdMr6+rHzt/9M7PrQWApCoBJLakYIElOrN5B
 EiAxunwJQISKNQYYmyVhjMVFq8ydMHSgtR7JVDHTh1AoStaO9M5hoJegD4Dnytaf
 F0/0Y5U+NGGWwPIyDrjB4wE9L8NCk0JfvpBhjORMkFSpAOe4VhxZrAGDyaCzVKVh
 YkxSirVKuVwEmvV2prmq4SAJi61EMUEPx2WL7hRN3ol/dF+2lU9nl2lyL3yRnGPY
 9mtNHur07qoMqyXI8750ayTzbMG75aakJF2be9G+zwNc3Sw8dqJvs2PwpSVdnima
 jWmWnRikws4qmEOEBV6nxtWf8qYACHevyK7YzIHDU8SVXLjAkX/u6LZGHAfTQ8Xo
 jYcISpiA2ko8YnMR7yy9FZqs4KGqeOotMamgJRGUcSY/9Xn8WDIrtQ4tIuJtGjzW
 XFOFafZOzyt6s1dNz01C4hzP60J+/CxPNRxx6zWnbijY6puADu/Mv1g+ai3nYdKA
 e/CYt6O8tzooFHCHtVLUPgWA82heDwNtjmlnSikWTdT07KLRhP+0w9Qq8gBzztKT
 7B/vPMjCMPQaJrrnj6GX
 =Rdy8
 -----END PGP SIGNATURE-----

Merge tag 'powerpc-4.13-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux

Pull powerpc fixes from Michael Ellerman:
 "Fixes for recently merged code:
   - a fix for the _PAGE_DEVMAP support, which was breaking KVM on
     Power9 radix
   - avoid a (harmless) lockdep warning in the early SMP code
   - return failure for some uses of dma_set_mask() rather than falling
     back to 32-bits
   - fix stack setup in watchdog soft_nmi_common() to use emergency
     stack
   - fix of_irq_to_resource() error check in of_fsl_spi_probe()

  Two fixes going to stable:
   - fix saving of Transactional Memory SPRs in core dump
   - fix __check_irq_replay missing decrementer interrupt

  And two misc:
   - fix 64-bit boot wrapper build with non-biarch compiler
   - work around a POWER9 PMU hang after state-loss idle

  Thanks to: Alistair Popple, Aneesh Kumar K.V, Cyril Bur, Gustavo
  Romero, Jose Ricardo Ziviani, Laurent Vivier, Nicholas Piggin, Oliver
  O'Halloran, Sergei Shtylyov, Suraj Jitindar Singh, Thomas Gleixner"

* tag 'powerpc-4.13-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/64: Fix __check_irq_replay missing decrementer interrupt
  powerpc/perf: POWER9 PMU stops after idle workaround
  powerpc/83xx/mpc832x_rdb: fix of_irq_to_resource() error check
  powerpc/64s: Fix stack setup in watchdog soft_nmi_common()
  powerpc/powernv/pci: Return failure for some uses of dma_set_mask()
  powerpc/boot: Fix 64-bit boot wrapper build with non-biarch compiler
  powerpc/smp: Call smp_ops->setup_cpu() directly on the boot CPU
  powerpc/tm: Fix saving of TM SPRs in core dump
  powerpc/mm: Fix pmd/pte_devmap() on non-leaf entries
2017-08-04 09:56:54 -07:00
Benjamin Herrenschmidt
6ff4d3e966 powerpc: Remove old unused icswx based coprocessor support
We have a whole pile of unused code to maintain the ACOP register,
allocate coprocessor PIDs and handle ACOP faults. This mechanism
was used for the HFI adapter on POWER7 which is dead and gone and
whose driver never went upstream. It was used on some A2 core based
stuff that also never saw the light of day.

Take out all that code.

There is still some POWER8 coprocessor code that uses icswx but it's
kernel only and thus doesn't use any of that infrastructure.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-03 16:06:52 +10:00