AxiDMA driver exposed the dma_set_max_seg_size() to the DMAENGINE.
It shall helps the DMA clients to create size-optimized linked-list
for the controller.
However, there are certain situations where DMA client might not be
abled to benefit from the dma_get_max_seg_size() if the segment size
can't meet the nature of the DMA client's operation.
In the case of ALSA operation, ALSA application and driver expecting
to run in a period of larger than 10ms regardless of the bit depth.
With this large period, there is a strong request to split the linked-list
in the AxiDMA driver.
Signed-off-by: Sia Jee Heng <jee.heng.sia@intel.com>
Tested-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Reviewed-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Link: https://lore.kernel.org/r/20210125013255.25799-18-jee.heng.sia@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add support for DMA Scatter-Gather (SG) constraint so that DMA clients can
handle the AxiDMA limitation.
Without supporting DMA constraint the default Max segment size reported by
dmaengine is 64KB, which is not supported by Intel KeemBay AxiDMA.
Signed-off-by: Sia Jee Heng <jee.heng.sia@intel.com>
Tested-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Link: https://lore.kernel.org/r/20210125013255.25799-17-jee.heng.sia@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add support for Intel KeemBay AxiDMA BYTE and HALFWORD registers
programming.
Intel KeemBay AxiDMA supports data transfer between device to memory
and memory to device operations.
This code is needed by I2C, I3C, I2S, SPI and UART which uses FIFO
size of 8bits and 16bits to perform memory to device data transfer
operation. 0-padding functionality is provided to avoid
pre-processing of data on CPU.
Signed-off-by: Sia Jee Heng <jee.heng.sia@intel.com>
Tested-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Link: https://lore.kernel.org/r/20210125013255.25799-16-jee.heng.sia@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add support for Intel KeemBay AxiDMA device handshake programming.
Device handshake number passed in to the AxiDMA shall be written to
the Intel KeemBay AxiDMA hardware handshake registers before DMA
operations are started.
Signed-off-by: Sia Jee Heng <jee.heng.sia@intel.com>
Tested-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Link: https://lore.kernel.org/r/20210125013255.25799-15-jee.heng.sia@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add support for Intel KeemBay AxiDMA to the .compatible field.
The AxiDMA Apb region will be accessible if the compatible string
matches the "intel,kmb-axi-dma".
Signed-off-by: Sia Jee Heng <jee.heng.sia@intel.com>
Tested-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Link: https://lore.kernel.org/r/20210125013255.25799-14-jee.heng.sia@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add support for Intel KeemBay DMA registers. These registers are required
to run data transfer between device to memory and memory to device on Intel
KeemBay SoC.
Signed-off-by: Sia Jee Heng <jee.heng.sia@intel.com>
Tested-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Link: https://lore.kernel.org/r/20210125013255.25799-12-jee.heng.sia@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add support for DMA_RESIDUE_GRANULARITY_BURST so that AxiDMA can report
DMA residue.
Existing AxiDMA driver only support data transfer between
memory to memory operation, therefore reporting DMA residue
to the DMA clients is not supported.
Reporting DMA residue to the DMA clients is important as DMA clients
shall invoke dmaengine_tx_status() to understand the number of bytes
been transferred so that the buffer pointer can be updated accordingly.
Signed-off-by: Sia Jee Heng <jee.heng.sia@intel.com>
Tested-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Link: https://lore.kernel.org/r/20210125013255.25799-10-jee.heng.sia@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add support for of_dma_controller_register() so that DMA clients
can pass in device handshake number to the AxiDMA driver.
DMA clients shall code the device handshake number in the Device tree.
When DMA activities are needed, DMA clients shall invoke OF helper
function to pass in the device handshake number to the AxiDMA.
Without register to the of_dma_controller_register(), data transfer
between memory to device and device to memory operations would failed.
Signed-off-by: Sia Jee Heng <jee.heng.sia@intel.com>
Tested-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Link: https://lore.kernel.org/r/20210125013255.25799-9-jee.heng.sia@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add support for device_prep_dma_cyclic() callback function to benefit
DMA cyclic client, for example ALSA.
Existing AxiDMA driver only support data transfer between memory to memory.
Data transfer between device to memory and memory to device in cyclic mode
would failed if this interface is not supported by the AxiDMA driver.
Signed-off-by: Sia Jee Heng <jee.heng.sia@intel.com>
Tested-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Link: https://lore.kernel.org/r/20210125013255.25799-8-jee.heng.sia@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add device_prep_slave_sg() callback function so that DMA_MEM_TO_DEV
and DMA_DEV_TO_MEM operations in single mode can be supported.
Existing AxiDMA driver only support data transfer between
memory to memory. Data transfer between device to memory and
memory to device in single mode would failed if this interface
is not supported by the AxiDMA driver.
Signed-off-by: Sia Jee Heng <jee.heng.sia@intel.com>
Tested-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Link: https://lore.kernel.org/r/20210125013255.25799-7-jee.heng.sia@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add device_config() callback function so that the device address
can be passed to the dma driver.
DMA clients use this interface to pass in the device address to the
AxiDMA. Without this interface, data transfer between device to memory
and memory to device would failed.
Signed-off-by: Sia Jee Heng <jee.heng.sia@intel.com>
Tested-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Link: https://lore.kernel.org/r/20210125013255.25799-6-jee.heng.sia@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add support for device_synchronize() callback function to sync with
dmaengine_terminate_sync().
Signed-off-by: Sia Jee Heng <jee.heng.sia@intel.com>
Tested-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Link: https://lore.kernel.org/r/20210125013255.25799-5-jee.heng.sia@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The DMA memory block is created at driver load time and exist for
device lifetime. Move the dma_pool_create() to the ->chan_resource()
callback function allowing the DMA memory blocks to be created as needed
and destroyed when the channel is freed.
Signed-off-by: Sia Jee Heng <jee.heng.sia@intel.com>
Tested-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Link: https://lore.kernel.org/r/20210125013255.25799-4-jee.heng.sia@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Simplify and refactor the descriptor management by removing the redundant
Linked List Item (LLI) queue control logic from the AxiDMA driver.
The descriptor is split into virtual descriptor and hardware LLI so that
only hardware LLI memories are allocated from the DMA memory pool.
Up to 64 descriptors can be allocated within a PAGE_SIZE compare to 16
descriptors in previous version. This solves the problem where an
ALSA driver expects more than 16 DMA descriptors to run.
Signed-off-by: Sia Jee Heng <jee.heng.sia@intel.com>
Tested-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Link: https://lore.kernel.org/r/20210125013255.25799-3-jee.heng.sia@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
YAML schemas Device Tree (DT) binding is the new format for DT to replace
the old format. Introduce YAML schemas DT binding for dw-axi-dmac and
remove the old version.
Signed-off-by: Sia Jee Heng <jee.heng.sia@intel.com>
Reviewed-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210125013255.25799-2-jee.heng.sia@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Clear the RTS bits of the flow-control request before determining the
new value when updating the settings.
Signed-off-by: Johan Hovold <johan@kernel.org>
Clearing TIOCM_RTS should always deassert RTS and setting the same bit
should enable auto-RTS if hardware flow control is enabled.
This allows user space to throttle input directly at the source also
when hardware-assisted flow control is enabled and makes dtr_rts()
always deassert both lines during close (when HUPCL is set).
Signed-off-by: Johan Hovold <johan@kernel.org>
Shorten the flow-control debug message by abbreviating the field names
and reducing the value width to two characters. The latter improves
readability since all but the least significant byte will almost always
be zero anyway.
Signed-off-by: Johan Hovold <johan@kernel.org>
Drop the macros used to shift the flow-control settings to make the code
more readable for consistency with the other requests.
Signed-off-by: Johan Hovold <johan@kernel.org>
The vendor request used to set the flow-control settings also sets the
state of the modem-control lines.
Add state variables to keep track of the modem-control lines to avoid
always asserting the lines whenever the flow-control settings are
updated.
This specifically also avoids asserting DTR/RTS when opening a port with
the line speed set to B0.
Signed-off-by: Johan Hovold <johan@kernel.org>
The CP210X_SET_MHS request cannot be used to control RTS when hardware
flow control (auto-RTS) is enabled and instead returns an error which is
currently logged as:
cp210x ttyUSB0: failed set request 0x7 status: -32
when opening and closing a port (and on TIOCMSET requests).
Add a crtscts flag to keep track of the hardware flow-control setting
and use it to suppress any request to change RTS when auto-RTS is
enabled.
Note that RTS is still deasserted when disabling the UART as part of
close.
Reported-by: Pho Tran <pho.tran@silabs.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
The header file of GCE should be for MT8183 SoC instead of MT8173.
Fixes: 91f9c963ce ("arm64: dts: mt8183: Add display nodes for MT8183")
Reported-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: Matthias Brugger <mbrugger@suse.com>
Reviewed-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Link: https://lore.kernel.org/r/20210131101726.804-1-matthias.bgg@kernel.org
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
When device_type == DEVICE_ALI, we should also check the return
value of pci_iomap() to avoid potential null pointer dereference.
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Link: https://lore.kernel.org/r/20210131100916.7915-1-dinghao.liu@zju.edu.cn
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Nothing too major here, I actually thought I'd sent most of these
right before the new year, but that apparently got lost in the bustle:
- Turing MMU fault recovery fixes
- Fix mDP connectors being reported as eDP to userspace
- Fixes for audio locking, and other bit-rot from DRM changes since
atomic support was written
- Misc other minor fixes.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Ben Skeggs <skeggsb@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CACAvsv7yLfhuVbYa-4g0vxVt93OaC7Sodiz2R-TDHu-MoofEdw@mail.gmail.com
The Intel Lightning Mountain (LGM) DMA controller is only present on
Intel Lightning Mountain SoCs. Hence add a dependency on X86, to
prevent asking the user about this driver when configuring a kernel
without Intel Lightning Mountain platform support.
While at it, fix a misspelling of "Intel".
Fixes: 32d31c79a1 ("dmaengine: Add Intel LGM SoC DMA support.")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20210129131702.2656060-1-geert+renesas@glider.be
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The DMACs (both SYS-DMAC and RT-DMAC) on R-Car V3U differ slightly from
the DMACs on R-Car Gen2 and other R-Car Gen3 SoCs:
1. The per-channel registers are located in a second register block.
Add support for mapping the second block, using the appropriate
offsets and stride.
2. The common Channel Clear Register (DMACHCLR) was replaced by a
per-channel register.
Update rcar_dmac_chan_clear{,_all}() to handle this.
As rcar_dmac_init() needs to clear the status before the individual
channels are probed, channel index and base address initialization
are moved forward.
Inspired by a patch in the BSP by Phong Hoang
<phong.hoang.wz@renesas.com>.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/20210128084455.2237256-5-geert+renesas@glider.be
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Extract the code to clear the status of one or all channels into their
own helpers, to prepare for the different handling of the R-Car V3U SoC.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/20210128084455.2237256-4-geert+renesas@glider.be
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add a helper macro for iterating over all DMAC channels, taking into
account the channel mask. Use it where appropriate, to simplify code.
Restore "reverse Christmas tree" order of local variables while adding a
new variable.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/20210128084455.2237256-3-geert+renesas@glider.be
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Document the compatible value for the Direct Memory Access Controller
blocks in the Renesas R-Car V3U (R8A779A0) SoC.
The most visible difference with DMAC blocks on other R-Car SoCs is the
move of the per-channel registers to a separate register block.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/20210128084455.2237256-2-geert+renesas@glider.be
Signed-off-by: Vinod Koul <vkoul@kernel.org>
