Some HW IP(ex: CCU) require the special iova range. That means the iova
got from dma_alloc_attrs for that devices must locate in his special range.
In this patch, we prepare a iommu group(domain) for each a iova range
requirement.
Meanwhile we still use one pagetable which support 16GB iova.
After this patch, If the iova range of a master is over 4G, the master
should:
a) Declare its special dma-ranges in its dtsi node. For example, If we
preassign the iova 4G-8G for vcodec, then the vcodec dtsi node should
add this:
/*
* iova start at 0x1_0000_0000, pa still start at 0x4000_0000
* size is 0x1_0000_0000.
*/
dma-ranges = <0x1 0x0 0x0 0x40000000 0x1 0x0>; /* 4G ~ 8G */
Note: we don't have a actual bus concept here. the master doesn't have its
special parent node, thus this dma-ranges can only be put in the master's
node.
b) Update the dma_mask:
dma_set_mask_and_coherent(dev, DMA_BIT_MASK(33));
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Link: https://lore.kernel.org/r/20210111111914.22211-29-yong.wu@mediatek.com
Signed-off-by: Will Deacon <will@kernel.org>
Add a new interface _get_domain_id from dev->dma_range_map,
The iommu consumer device will use dma-ranges in dtsi node to indicate
its dma address region requirement. In this iommu driver, we will get
the requirement and decide which iova domain it should locate.
In the lastest SoC, there will be several iova-regions(domains), we will
compare and calculate which domain is right. If the start/end of device
requirement equal some region. it is best fit of course. If it is inside
some region, it is also ok. the iova requirement of a device should not
be inside two or more regions.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Link: https://lore.kernel.org/r/20210111111914.22211-28-yong.wu@mediatek.com
Signed-off-by: Will Deacon <will@kernel.org>
Add a new structure for the iova_region. Each a region will be a
independent iommu domain.
For the previous SoC, there is single iova region(0~4G). For the SoC
that need support multi-domains, there will be several regions.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Link: https://lore.kernel.org/r/20210111111914.22211-27-yong.wu@mediatek.com
Signed-off-by: Will Deacon <will@kernel.org>
Move the domain geometry.aperture updating into domain_finalise.
This is a preparing patch for updating the domain region. We know the
detailed iova region in the attach_device.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Link: https://lore.kernel.org/r/20210111111914.22211-26-yong.wu@mediatek.com
Signed-off-by: Will Deacon <will@kernel.org>
Currently domain_alloc only has a parameter(type), We have no chance to
input some special data. This patch moves the domain_finalise into
attach_device which has the device information, then could update
the domain's geometry.aperture ranges for each a device.
Strictly, I should use the data from mtk_iommu_get_m4u_data as the
parameter of mtk_iommu_domain_finalise in this patch. but dom->data
only is used in tlb ops in which the data is get from the m4u_list, thus
it is ok here.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Link: https://lore.kernel.org/r/20210111111914.22211-25-yong.wu@mediatek.com
Signed-off-by: Will Deacon <will@kernel.org>
Add "struct mtk_iommu_data *" in the "struct mtk_iommu_domain",
reduce the call mtk_iommu_get_m4u_data().
No functional change.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Link: https://lore.kernel.org/r/20210111111914.22211-24-yong.wu@mediatek.com
Signed-off-by: Will Deacon <will@kernel.org>
If the iova is over 32bit, the fault status register bit is a little
different.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Link: https://lore.kernel.org/r/20210111111914.22211-23-yong.wu@mediatek.com
Signed-off-by: Will Deacon <will@kernel.org>
If the iova is 34bit, the iova[32][33] is the bit0/1 in the tlb flush
register. Add a new macro for this.
In the macro, since (iova + size - 1) may be end with 0xfff, then the
bit0/1 always is 1, thus add a mask.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Link: https://lore.kernel.org/r/20210111111914.22211-22-yong.wu@mediatek.com
Signed-off-by: Will Deacon <will@kernel.org>
In the previous SoC, the M4U HW is in the EMI power domain which is
always on. the latest M4U is in the display power domain which may be
turned on/off, thus we have to add pm_runtime interface for it.
When the engine work, the engine always enable the power and clocks for
smi-larb/smi-common, then the M4U's power will always be powered on
automatically via the device link with smi-common.
Note: we don't enable the M4U power in iommu_map/unmap for tlb flush.
If its power already is on, of course it is ok. if the power is off,
the main tlb will be reset while M4U power on, thus the tlb flush while
m4u power off is unnecessary, just skip it.
Therefore, we increase the ref_count for pm when pm status is ACTIVE,
otherwise, skip it. Meanwhile, the tlb_flush_range is called so often,
thus, update pm ref_count while the SoC has power-domain to avoid touch the
dev->power.lock. and the tlb_flush_all only is called when boot, so no
need check if the SoC has power-domain to keep code clean.
There will be one case that pm runctime status is not expected when tlb
flush. After boot, the display may call dma_alloc_attrs before it call
pm_runtime_get(disp-dev), then the m4u's pm status is not active inside
the dma_alloc_attrs. Since it only happens after boot, the tlb is clean
at that time, I also think this is ok.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Link: https://lore.kernel.org/r/20210111111914.22211-21-yong.wu@mediatek.com
Signed-off-by: Will Deacon <will@kernel.org>
In pm runtime case, all the registers backup/restore and bclk are
controlled in the pm_runtime callback, Rename the original
suspend/resume to the runtime_suspend/resume.
Use pm_runtime_force_suspend/resume as the normal suspend/resume.
iommu should suspend after iommu consumer devices, thus use _LATE_.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Link: https://lore.kernel.org/r/20210111111914.22211-20-yong.wu@mediatek.com
Signed-off-by: Will Deacon <will@kernel.org>
In the lastest SoC, M4U has its special power domain. thus, If the engine
begin to work, it should help enable the power for M4U firstly.
Currently if the engine work, it always enable the power/clocks for
smi-larbs/smi-common. This patch adds device_link for smi-common and M4U.
then, if smi-common power is enabled, the M4U power also is powered on
automatically.
Normally M4U connect with several smi-larbs and their smi-common always
are the same, In this patch it get smi-common dev from the last smi-larb
device, then add the device_link.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Link: https://lore.kernel.org/r/20210111111914.22211-19-yong.wu@mediatek.com
Signed-off-by: Will Deacon <will@kernel.org>
In the original code, we lack the error handle. This patch adds them.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Link: https://lore.kernel.org/r/20210111111914.22211-18-yong.wu@mediatek.com
Signed-off-by: Will Deacon <will@kernel.org>
In attach device, it will update the pagetable base address register.
Move the hw_init function also here. Then it only need call
pm_runtime_get/put one time here if m4u has power domain.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Link: https://lore.kernel.org/r/20210111111914.22211-17-yong.wu@mediatek.com
Signed-off-by: Will Deacon <will@kernel.org>
This patch only updates oas in different SoCs.
If the SoC supports 4GB-mode and current dram size is 4GB, the oas is 33.
otherwise, it's still 32. In the lastest SoC, the oas is 35bits.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Link: https://lore.kernel.org/r/20210111111914.22211-16-yong.wu@mediatek.com
Signed-off-by: Will Deacon <will@kernel.org>
Add a HW flag for if the HW support 34bit IOVA. the previous SoC
still use 32bit. normally the lvl1 pgtable size is 16KB when ias == 32.
if ias == 34, lvl1 pgtable size is 16KB * 4. The purpose of this patch
is to save 16KB*3 continuous memory for the previous SoC.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Link: https://lore.kernel.org/r/20210111111914.22211-15-yong.wu@mediatek.com
Signed-off-by: Will Deacon <will@kernel.org>
The standard input iova bits is 32. MediaTek quad the lvl1 pagetable
(4 * lvl1). No change for lvl2 pagetable. Then the iova bits can reach
34bit.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Link: https://lore.kernel.org/r/20210111111914.22211-14-yong.wu@mediatek.com
Signed-off-by: Will Deacon <will@kernel.org>
Add "cfg" as a parameter for some macros. This is a preparing patch for
mediatek extend the lvl1 pgtable. No functional change.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Acked-by: Will Deacon <will@kernel.org>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Link: https://lore.kernel.org/r/20210111111914.22211-13-yong.wu@mediatek.com
Signed-off-by: Will Deacon <will@kernel.org>
The current _ARM_V7S_LVL_BITS/ARM_V7S_LVL_SHIFT use a formula to calculate
the corresponding value for level1 and level2 to pretend the code sane.
Actually their level1 and level2 values are different from each other.
This patch only clarify the two macro. No functional change.
Suggested-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Link: https://lore.kernel.org/r/20210111111914.22211-12-yong.wu@mediatek.com
Signed-off-by: Will Deacon <will@kernel.org>
MediaTek extend the bit5 in lvl1 and lvl2 descriptor as PA34.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Acked-by: Will Deacon <will@kernel.org>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Link: https://lore.kernel.org/r/20210111111914.22211-11-yong.wu@mediatek.com
Signed-off-by: Will Deacon <will@kernel.org>
Use the ias for the valid iova checking in arm_v7s_unmap. This is a
preparing patch for supporting iova 34bit for MediaTek.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Link: https://lore.kernel.org/r/20210111111914.22211-10-yong.wu@mediatek.com
Signed-off-by: Will Deacon <will@kernel.org>
Use the common memory header(larb-port) in the source code.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Link: https://lore.kernel.org/r/20210111111914.22211-9-yong.wu@mediatek.com
Signed-off-by: Will Deacon <will@kernel.org>
This patch adds decriptions for mt8192 IOMMU and SMI.
mt8192 also is MTK IOMMU gen2 which uses ARM Short-Descriptor translation
table format. The M4U-SMI HW diagram is as below:
EMI
|
M4U
|
------------
SMI Common
------------
|
+-------+------+------+----------------------+-------+
| | | | ...... | |
| | | | | |
larb0 larb1 larb2 larb4 ...... larb19 larb20
disp0 disp1 mdp vdec IPE IPE
All the connections are HW fixed, SW can NOT adjust it.
mt8192 M4U support 0~16GB iova range. we preassign different engines
into different iova ranges:
domain-id module iova-range larbs
0 disp 0 ~ 4G larb0/1
1 vcodec 4G ~ 8G larb4/5/7
2 cam/mdp 8G ~ 12G larb2/9/11/13/14/16/17/18/19/20
3 CCU0 0x4000_0000 ~ 0x43ff_ffff larb13: port 9/10
4 CCU1 0x4400_0000 ~ 0x47ff_ffff larb14: port 4/5
The iova range for CCU0/1(camera control unit) is HW requirement.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Link: https://lore.kernel.org/r/20210111111914.22211-6-yong.wu@mediatek.com
Signed-off-by: Will Deacon <will@kernel.org>
Only rename the header guard for all the SoC larb port header file.
No funtional change.
Suggested-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Link: https://lore.kernel.org/r/20210111111914.22211-5-yong.wu@mediatek.com
Signed-off-by: Will Deacon <will@kernel.org>
Extend the max larb number definition as mt8192 has larb_nr over 16.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Link: https://lore.kernel.org/r/20210111111914.22211-4-yong.wu@mediatek.com
Signed-off-by: Will Deacon <will@kernel.org>
Put all the macros about smi larb/port togethers.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Link: https://lore.kernel.org/r/20210111111914.22211-3-yong.wu@mediatek.com
Signed-off-by: Will Deacon <will@kernel.org>
From the 4.19 kernel, thread related code has been removed in queue.c.
So we can exclude unnecessary header file.
Signed-off-by: ChanWoo Lee <cw9316.lee@samsung.com>
Acked-by: Coly Li <colyli@suse.de>
Link: https://lore.kernel.org/r/20210125064355.28545-1-cw9316.lee@samsung.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Add support for testing whether bus voltage level translator is present
and operational. This is useful on systems where the bus voltage level
translator is optional, as the translator can be auto-detected by the
driver and the feedback clock functionality can be disabled if it is
not present.
This requires additional pinmux state, "init", where the CMD, CK, CKIN
lines are not configured, so they can be claimed as GPIOs early on in
probe(). The translator test sets CMD high to avoid interfering with a
card, and then verifies whether signal set on CK is detected on CKIN.
If the signal is detected, translator is present, otherwise the CKIN
feedback clock are disabled.
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Cc: Ludovic Barre <ludovic.barre@st.com>
Tested-by: Yann Gautier <yann.gautier@foss.st.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Marek Vasut <marex@denx.de>
Link: https://lore.kernel.org/r/20210124170258.32862-2-marex@denx.de
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Add support for Qualcomm Inline Crypto Engine (ICE) to sdhci-msm.
The standard-compliant parts, such as querying the crypto capabilities
and enabling crypto for individual MMC requests, are already handled by
cqhci-crypto.c, which itself is wired into the blk-crypto framework.
However, ICE requires vendor-specific init, enable, and resume logic,
and it requires that keys be programmed and evicted by vendor-specific
SMC calls. Make the sdhci-msm driver handle these details.
This is heavily inspired by the similar changes made for UFS, since the
UFS and eMMC ICE instances are very similar. See commit df4ec2fa7a
("scsi: ufs-qcom: Add Inline Crypto Engine support").
I tested this on a Sony Xperia 10, which uses the Snapdragon 630 SoC,
which has basic upstream support. Mainly, I used android-xfstests
(https://github.com/tytso/xfstests-bld/blob/master/Documentation/android-xfstests.md)
to run the ext4 and f2fs encryption tests in a Debian chroot:
android-xfstests -c ext4,f2fs -g encrypt -m inlinecrypt
These tests included tests which verify that the on-disk ciphertext is
identical to that produced by a software implementation. I also
verified that ICE was actually being used.
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Satya Tangirala <satyat@google.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20210126001456.382989-9-ebiggers@kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Document the bindings for the registers and clock for the MMC instance
of the Inline Crypto Engine (ICE) on Snapdragon SoCs. These bindings
are needed in order for sdhci-msm to support inline encryption.
Reviewed-by: Satya Tangirala <satyat@google.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20210126001456.382989-8-ebiggers@kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The SCM calls QCOM_SCM_ES_INVALIDATE_ICE_KEY and
QCOM_SCM_ES_CONFIG_SET_ICE_KEY are also needed for eMMC inline
encryption support, not just for UFS. Update the comments accordingly.
Reviewed-by: Satya Tangirala <satyat@google.com>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20210125183810.198008-7-ebiggers@kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
On Snapdragon SoCs, the Linux kernel isn't permitted to directly access
the standard CQHCI crypto configuration registers. Instead, programming
and evicting keys must be done through vendor-specific SMC calls.
To support this hardware, add a ->program_key() method to
'struct cqhci_host_ops'. This allows overriding the standard CQHCI
crypto key programming / eviction procedure.
This is inspired by the corresponding UFS crypto support, which uses
these same SMC calls. See commit 1bc726e26e ("scsi: ufs: Add
program_key() variant op").
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Satya Tangirala <satyat@google.com>
Reviewed-and-tested-by: Peng Zhou <peng.zhou@mediatek.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20210126001456.382989-6-ebiggers@kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Add support for eMMC inline encryption using the blk-crypto framework
(Documentation/block/inline-encryption.rst).
eMMC inline encryption support is specified by the upcoming JEDEC eMMC
v5.2 specification. It is only specified for the CQ interface, not the
non-CQ interface. Although the eMMC v5.2 specification hasn't been
officially released yet, the crypto support was already agreed on
several years ago, and it was already implemented by at least two major
hardware vendors. Lots of hardware in the field already supports and
uses it, e.g. Snapdragon 630 to give one example.
eMMC inline encryption support is very similar to the UFS inline
encryption support which was standardized in the UFS v2.1 specification
and was already upstreamed. The only major difference is that eMMC
limits data unit numbers to 32 bits, unlike UFS's 64 bits.
Like we did with UFS, make the crypto support opt-in by individual
drivers; don't enable it automatically whenever the hardware declares
crypto support. This is necessary because in every case we've seen,
some extra vendor-specific logic is needed to use the crypto support.
Co-developed-by: Satya Tangirala <satyat@google.com>
Signed-off-by: Satya Tangirala <satyat@google.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Satya Tangirala <satyat@google.com>
Reviewed-and-tested-by: Peng Zhou <peng.zhou@mediatek.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20210125183810.198008-5-ebiggers@kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Move the task descriptor initialization into cqhci_prep_task_desc().
In addition, make it explicitly initialize all 128 bits of the task
descriptor if the host controller is using 128-bit task descriptors,
rather than relying on the implicit zeroing from dmam_alloc_coherent().
This is needed to prepare for CQHCI inline encryption support, which
requires 128-bit task descriptors and uses the upper 64 bits.
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Satya Tangirala <satyat@google.com>
Reviewed-and-tested-by: Peng Zhou <peng.zhou@mediatek.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20210126001456.382989-4-ebiggers@kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Rename cqhci.c to cqhci-core.c so that another source file can be added
to the cqhci module without having to rename the module.
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-and-tested-by: Peng Zhou <peng.zhou@mediatek.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20210126001456.382989-3-ebiggers@kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
In preparation for adding CQHCI crypto engine (inline encryption)
support, add the code required to make mmc_core and mmc_block aware of
inline encryption. Specifically:
- Add a capability flag MMC_CAP2_CRYPTO to struct mmc_host. Drivers
will set this if the host and driver support inline encryption.
- Embed a blk_keyslot_manager in struct mmc_host. Drivers will
initialize this (as a device-managed resource) if the host and driver
support inline encryption. mmc_block registers this keyslot manager
with the request_queue of any MMC card attached to the host.
- Make mmc_block copy the crypto keyslot and crypto data unit number
from struct request to struct mmc_request, so that drivers will have
access to them.
- If the MMC host is reset, reprogram all the keyslots to ensure that
the software state stays in sync with the hardware state.
Co-developed-by: Satya Tangirala <satyat@google.com>
Signed-off-by: Satya Tangirala <satyat@google.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Satya Tangirala <satyat@google.com>
Reviewed-and-tested-by: Peng Zhou <peng.zhou@mediatek.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20210126001456.382989-2-ebiggers@kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Use the new resource-managed variant of blk_ksm_init() so that the UFS
driver doesn't have to manually call blk_ksm_destroy().
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Satya Tangirala <satyat@google.com>
Link: https://lore.kernel.org/r/20210121082155.111333-3-ebiggers@kernel.org
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Add a resource-managed variant of blk_ksm_init() so that drivers don't
have to worry about calling blk_ksm_destroy().
Note that the implementation uses a custom devres action to call
blk_ksm_destroy() rather than switching the two allocations to be
directly devres-managed, e.g. with devm_kmalloc(). This is because we
need to keep zeroing the memory containing the keyslots when it is
freed, and also because we want to continue using kvmalloc() (and there
is no devm_kvmalloc()).
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Satya Tangirala <satyat@google.com>
Acked-by: Jens Axboe <axboe@kernel.dk>
Link: https://lore.kernel.org/r/20210121082155.111333-2-ebiggers@kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Randy found that with the following Kconfig settings we have duplicate
definitions (e.g. __inittest()) in sdhci-of-aspeed due to competing
module_init()/module_exit() calls from kunit and driver the itself.
```
CONFIG_MMC_SDHCI_OF_ASPEED=m
CONFIG_MMC_SDHCI_OF_ASPEED_TEST=y
```
Conditionally open-code the kunit initialisation to avoid the error.
Fixes: 7efa02a981d6 ("mmc: sdhci-of-aspeed: Add KUnit tests for phase calculations")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Link: https://lore.kernel.org/r/20210122114852.3790565-1-andrew@aj.id.au
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The CSR SiRF prima2/atlas platforms are getting removed, so this driver
is no longer needed.
Cc: Barry Song <baohua@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Barry Song <baohua@kernel.org>
Link: https://lore.kernel.org/r/20210120142801.334550-3-arnd@kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The zte zx platform is getting removed, so this driver is no
longer needed.
Cc: Jun Nie <jun.nie@linaro.org>
Cc: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20210120142801.334550-2-arnd@kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The RPi4 has an Arasan controller it carries over from the RPi3 and a newer
eMMC2 controller. Because of a couple of quirks, it seems wiser to bind
these controllers to the same driver that DT is using on this platform
rather than the generic sdhci_acpi driver with PNP0D40.
So, BCM2847 describes the older Arasan and BRCME88C describes the newer
eMMC2. The older Arasan is reusing an existing ACPI _HID used by other OSes
booting these tables on the RPi.
With this change, Linux is capable of utilizing the SD card slot, and the
Wi-Fi when booted with UEFI+ACPI on the RPi4.
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20210120000406.1843400-2-jeremy.linton@arm.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
mmc_test_cleanup() has same body as __mmc_test_prepare() with write
except the character to memset().
Signed-off-by: Yue Hu <huyue2@yulong.com>
Link: https://lore.kernel.org/r/20210119073705.375-1-zbestahu@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Since it's doing nothing for shutdown behavior. And the callback will
be checked firstly in mmc_bus_shutdown().
Signed-off-by: Yue Hu <huyue2@yulong.com>
Link: https://lore.kernel.org/r/20210119051425.305-1-zbestahu@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The host parameter is not used in the body of mmc_sd_get_csd(),
so let's remove it. Update related code at the same time.
Signed-off-by: Yue Hu <huyue2@yulong.com>
Link: https://lore.kernel.org/r/20210118084520.241-1-zbestahu@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
