Here is the tty and serial driver updates for 5.8-rc1
Nothing huge at all, just a lot of little serial driver fixes, updates
for new devices and features, and other small things. Full details are
in the shortlog.
Note, you will get a conflict merging with your tree in the
Documentation/devicetree/bindings/serial/rs485.yaml file, but it should
be pretty obvious what to do. If not, I'm sure Rob will clean it all up
afterwards :)
All of these have been in linux-next with no issues for a while.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXtzpCg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylRxACgjGtOKPjahONL4lWd0F8ZYEcyw7sAn34woBCO
BDUV3kolrRQ4OYNJWsHP
=TvqG
-----END PGP SIGNATURE-----
Merge tag 'tty-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial driver updates from Greg KH:
"Here is the tty and serial driver updates for 5.8-rc1
Nothing huge at all, just a lot of little serial driver fixes, updates
for new devices and features, and other small things. Full details are
in the shortlog.
All of these have been in linux-next with no issues for a while"
* tag 'tty-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (67 commits)
tty: serial: qcom_geni_serial: Add 51.2MHz frequency support
tty: serial: imx: clear Ageing Timer Interrupt in handler
serial: 8250_fintek: Add F81966 Support
sc16is7xx: Add flag to activate IrDA mode
dt-bindings: sc16is7xx: Add flag to activate IrDA mode
serial: 8250: Support rs485 bus termination GPIO
serial: 8520_port: Fix function param documentation
dt-bindings: serial: Add binding for rs485 bus termination GPIO
vt: keyboard: avoid signed integer overflow in k_ascii
serial: 8250: Enable 16550A variants by default on non-x86
tty: hvc_console, fix crashes on parallel open/close
serial: imx: Initialize lock for non-registered console
sc16is7xx: Read the LSR register for basic device presence check
sc16is7xx: Allow sharing the IRQ line
sc16is7xx: Use threaded IRQ
sc16is7xx: Always use falling edge IRQ
tty: n_gsm: Fix bogus i++ in gsm_data_kick
tty: n_gsm: Remove unnecessary test in gsm_print_packet()
serial: stm32: add no_console_suspend support
tty: serial: fsl_lpuart: Use __maybe_unused instead of #if CONFIG_PM_SLEEP
...
These are updates to SoC specific drivers that did not have
another subsystem maintainer tree to go through for some
reason:
- Some bus and memory drivers for the MIPS P5600 based
Baikal-T1 SoC that is getting added through the MIPS tree.
- There are new soc_device identification drivers for TI K3,
Qualcomm MSM8939
- New reset controller drivers for NXP i.MX8MP, Renesas
RZ/G1H, and Hisilicon hi6220
- The SCMI firmware interface can now work across ARM SMC/HVC
as a transport.
- Mediatek platforms now use a new driver for their "MMSYS"
hardware block that controls clocks and some other aspects
in behalf of the media and gpu drivers.
- Some Tegra processors have improved power management
support, including getting woken up by the PMIC and cluster
power down during idle.
- A new v4l staging driver for Tegra is added.
- Cleanups and minor bugfixes for TI, NXP, Hisilicon,
Mediatek, and Tegra.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----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=44Jc
-----END PGP SIGNATURE-----
Merge tag 'arm-drivers-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM/SoC driver updates from Arnd Bergmann:
"These are updates to SoC specific drivers that did not have another
subsystem maintainer tree to go through for some reason:
- Some bus and memory drivers for the MIPS P5600 based Baikal-T1 SoC
that is getting added through the MIPS tree.
- There are new soc_device identification drivers for TI K3, Qualcomm
MSM8939
- New reset controller drivers for NXP i.MX8MP, Renesas RZ/G1H, and
Hisilicon hi6220
- The SCMI firmware interface can now work across ARM SMC/HVC as a
transport.
- Mediatek platforms now use a new driver for their "MMSYS" hardware
block that controls clocks and some other aspects in behalf of the
media and gpu drivers.
- Some Tegra processors have improved power management support,
including getting woken up by the PMIC and cluster power down
during idle.
- A new v4l staging driver for Tegra is added.
- Cleanups and minor bugfixes for TI, NXP, Hisilicon, Mediatek, and
Tegra"
* tag 'arm-drivers-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (155 commits)
clk: sprd: fix compile-testing
bus: bt1-axi: Build the driver into the kernel
bus: bt1-apb: Build the driver into the kernel
bus: bt1-axi: Use sysfs_streq instead of strncmp
bus: bt1-axi: Optimize the return points in the driver
bus: bt1-apb: Use sysfs_streq instead of strncmp
bus: bt1-apb: Use PTR_ERR_OR_ZERO to return from request-regs method
bus: bt1-apb: Fix show/store callback identations
bus: bt1-apb: Include linux/io.h
dt-bindings: memory: Add Baikal-T1 L2-cache Control Block binding
memory: Add Baikal-T1 L2-cache Control Block driver
bus: Add Baikal-T1 APB-bus driver
bus: Add Baikal-T1 AXI-bus driver
dt-bindings: bus: Add Baikal-T1 APB-bus binding
dt-bindings: bus: Add Baikal-T1 AXI-bus binding
staging: tegra-video: fix V4L2 dependency
tee: fix crypto select
drivers: soc: ti: knav_qmss_queue: Make knav_gp_range_ops static
soc: ti: add k3 platforms chipid module driver
dt-bindings: soc: ti: add binding for k3 platforms chipid module
...
kmap_atomic_prot() is now exported by all architectures. Use this
function rather than open coding a driver specific kmap_atomic.
[arnd@arndb.de: include linux/highmem.h]
Link: http://lkml.kernel.org/r/20200508220150.649044-1-arnd@arndb.de
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Chris Zankel <chris@zankel.net>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Helge Deller <deller@gmx.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20200507150004.1423069-12-ira.weiny@intel.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The most innocuous result of not having done this is that we end up
sending unnecessary methods when we next enable the window.
However, interactions with the code handling skipping disables when
an update immediately follows, and window ownership assignment, can
lead to upsetting the display hardware on Volta and newer.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Tegra firmware doesn't actually use any version numbers and passing -1
causes the existing firmware binaries not to be found. Use version 0 to
find the correct files.
Fixes: ef16dc278e ("drm/nouveau/gr/gf100-: select implementation based on available FW")
Signed-off-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Some HDA pin widgets may be disabled by BIOS, and unavailable from a
SOR. Our SOR allocation policy uses this information to allocate an
appropriate SOR when HDA is supported by a display.
Thank you to NVIDIA for providing the information to determine this.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Since GM200, SORs are no longer tied to a specific connector, and we
allocate them instead, with the assumption that all SORs are equally
capable.
However, there's a 1<->1 mapping between SOR and HDA pin widget, and
it turns out that it's possible for some widgets to be disabled...
In order to avoid picking a SOR without a valid pin widget, some new
rules need to be added.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
No logical changes here, this is just moving the code to make the
changes in the next commit more obvious.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
-----BEGIN PGP SIGNATURE-----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=KNAo
-----END PGP SIGNATURE-----
Merge tag 'media/v5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- Media documentation is now split into admin-guide, driver-api and
userspace-api books (a longstanding request from Jon);
- The media Kconfig was reorganized, in order to make easier to select
drivers and their dependencies;
- The testing drivers now has a separate directory;
- added a new driver for Rockchip Video Decoder IP;
- The atomisp staging driver was resurrected. It is meant to work with
4 generations of cameras on Atom-based laptops, tablets and cell
phones. So, it seems worth investing time to cleanup this driver and
making it in good shape.
- Added some V4L2 core ancillary routines to help with h264 codecs;
- Added an ov2740 image sensor driver;
- The si2157 gained support for Analog TV, which, in turn, added
support for some cx231xx and cx23885 boards to also support analog
standards;
- Added some V4L2 controls (V4L2_CID_CAMERA_ORIENTATION and
V4L2_CID_CAMERA_SENSOR_ROTATION) to help identifying where the camera
is located at the device;
- VIDIOC_ENUM_FMT was extended to support MC-centric devices;
- Lots of drivers improvements and cleanups.
* tag 'media/v5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (503 commits)
media: Documentation: media: Refer to mbus format documentation from CSI-2 docs
media: s5k5baf: Replace zero-length array with flexible-array
media: i2c: imx219: Drop <linux/clk-provider.h> and <linux/clkdev.h>
media: i2c: Add ov2740 image sensor driver
media: ov8856: Implement sensor module revision identification
media: ov8856: Add devicetree support
media: dt-bindings: ov8856: Document YAML bindings
media: dvb-usb: Add Cinergy S2 PCIe Dual Port support
media: dvbdev: Fix tuner->demod media controller link
media: dt-bindings: phy: phy-rockchip-dphy-rx0: move rockchip dphy rx0 bindings out of staging
media: staging: dt-bindings: phy-rockchip-dphy-rx0: remove non-used reg property
media: atomisp: unify the version for isp2401 a0 and b0 versions
media: atomisp: update TODO with the current data
media: atomisp: adjust some code at sh_css that could be broken
media: atomisp: don't produce errs for ignored IRQs
media: atomisp: print IRQ when debugging
media: atomisp: isp_mmu: don't use kmem_cache
media: atomisp: add a notice about possible leak resources
media: atomisp: disable the dynamic and reserved pools
media: atomisp: turn on camera before setting it
...
This code was using get_user_pages*(), in a "Case 2" scenario (DMA/RDMA),
using the categorization from [1]. That means that it's time to convert
the get_user_pages*() + put_page() calls to pin_user_pages*() +
unpin_user_pages() calls.
There is some helpful background in [2]: basically, this is a small part
of fixing a long-standing disconnect between pinning pages, and file
systems' use of those pages.
[1] Documentation/core-api/pin_user_pages.rst
[2] "Explicit pinning of user-space pages":
https://lwn.net/Articles/807108/
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Souptick Joarder <jrdr.linux@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: "Joonas Lahtinen" <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Link: http://lkml.kernel.org/r/20200519002124.2025955-5-jhubbard@nvidia.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
[Why]
Whenever we switch between tiled formats without also switching pixel
formats or doing anything else that recreates the DC plane state we
can run into underflow or hangs since we're not updating the
DML parameters before committing to the hardware.
[How]
If the update type is FULL then call validate_bandwidth again to update
the DML parmeters before committing the state.
This is basically just a workaround and protective measure against
update types being added DC where we could run into this issue in
the future.
We can only fully validate the state in advance before applying it to
the hardware if we recreate all the plane and stream states since
we can't modify what's currently in use.
The next step is to update DM to ensure that we're creating the plane
and stream states for whatever could potentially be a full update in
DC to pre-emptively recreate the state for DC global validation.
The workaround can stay until this has been fixed in DM.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Hersen Wu <hersenxs.wu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We may end up with no planes set yet, depending on the ordering, but we
should have the proper blanking state which is either handled by either
DPG or TG depending on the hardware generation. Check both to determine
the proper blanked state.
Bug: https://gitlab.freedesktop.org/drm/amd/issues/781
Fixes: 5fc0cbfad4 ("drm/amd/display: determine if a pipe is synced by plane state")
Cc: nicholas.kazlauskas@amd.com
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
drm connector notifies userspace on hotplug event prematurely before
late_register and mode_object register completes. This leads to a race
between userspace and kernel on updating the IDR list. So, move the
notification to end of connector register.
Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Signed-off-by: Steve Cohen <cohens@codeaurora.org>
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1591155451-10393-1-git-send-email-jsanka@codeaurora.org
This series adds a selftest for hmm_range_fault() and several of the
DEVICE_PRIVATE migration related actions, and another simplification for
hmm_range_fault()'s API.
- Simplify hmm_range_fault() with a simpler return code, no
HMM_PFN_SPECIAL, and no customizable output PFN format
- Add a selftest for hmm_range_fault() and DEVICE_PRIVATE related
functionality
-----BEGIN PGP SIGNATURE-----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=twev
-----END PGP SIGNATURE-----
Merge tag 'for-linus-hmm' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull hmm updates from Jason Gunthorpe:
"This series adds a selftest for hmm_range_fault() and several of the
DEVICE_PRIVATE migration related actions, and another simplification
for hmm_range_fault()'s API.
- Simplify hmm_range_fault() with a simpler return code, no
HMM_PFN_SPECIAL, and no customizable output PFN format
- Add a selftest for hmm_range_fault() and DEVICE_PRIVATE related
functionality"
* tag 'for-linus-hmm' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
MAINTAINERS: add HMM selftests
mm/hmm/test: add selftests for HMM
mm/hmm/test: add selftest driver for HMM
mm/hmm: remove the customizable pfn format from hmm_range_fault
mm/hmm: remove HMM_PFN_SPECIAL
drm/amdgpu: remove dead code after hmm_range_fault()
mm/hmm: make hmm_range_fault return 0 or -1
- Rework the system-wide PM driver flags to make them easier to
understand and use and update their documentation (Rafael Wysocki,
Alan Stern).
- Allow cpuidle governors to be switched at run time regardless of
the kernel configuration and update the related documentation
accordingly (Hanjun Guo).
- Improve the resume device handling in the user space hibernarion
interface code (Domenico Andreoli).
- Document the intel-speed-select sysfs interface (Srinivas
Pandruvada).
- Make the ACPI code handing suspend to idle print more debug
messages to help diagnose issues with it (Rafael Wysocki).
- Fix a helper routine in the cpufreq core and correct a typo in
the struct cpufreq_driver kerneldoc comment (Rafael Wysocki, Wang
Wenhu).
- Update cpufreq drivers:
* Make the intel_pstate driver start in the passive mode by
default on systems without HWP (Rafael Wysocki).
* Add i.MX7ULP support to the imx-cpufreq-dt driver and add
i.MX7ULP to the cpufreq-dt-platdev blacklist (Peng Fan).
* Convert the qoriq cpufreq driver to a platform one, make the
platform code create a suitable device object for it and add
platform dependencies to it (Mian Yousaf Kaukab, Geert
Uytterhoeven).
* Fix wrong compatible binding in the qcom driver (Ansuel Smith).
* Build the omap driver by default for ARCH_OMAP2PLUS (Anders
Roxell).
* Add r8a7742 SoC support to the dt cpufreq driver (Lad Prabhakar).
- Update cpuidle core and drivers:
* Fix three reference count leaks in error code paths in the
cpuidle core (Qiushi Wu).
* Convert Qualcomm SPM to a generic cpuidle driver (Stephan
Gerhold).
* Fix up the execution order when entering a domain idle state in
the PSCI driver (Ulf Hansson).
- Fix a reference counting issue related to clock management and
clean up two oddities in the PM-runtime framework (Rafael Wysocki,
Andy Shevchenko).
- Add ElkhartLake support to the Intel RAPL power capping driver
and remove an unused local MSR definition from it (Jacob Pan,
Sumeet Pawnikar).
- Update devfreq core and drivers:
* Replace strncpy() with strscpy() in the devfreq core and use
lockdep asserts instead of manual checks for a locked mutex in
it (Dmitry Osipenko, Krzysztof Kozlowski).
* Add a generic imx bus scaling driver and make it register an
interconnect device (Leonard Crestez, Gustavo A. R. Silva).
* Make the cpufreq notifier in the tegra30 driver take boosting
into account and delete an unuseful error message from that
driver (Dmitry Osipenko, Markus Elfring).
- Remove unneeded semicolon from the cpupower code (Zou Wei).
-----BEGIN PGP SIGNATURE-----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=APdj
-----END PGP SIGNATURE-----
Merge tag 'pm-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"These rework the system-wide PM driver flags, make runtime switching
of cpuidle governors easier, improve the user space hibernation
interface code, add intel-speed-select interface documentation, add
more debug messages to the ACPI code handling suspend to idle, update
the cpufreq core and drivers, fix a minor issue in the cpuidle core
and update two cpuidle drivers, improve the PM-runtime framework,
update the Intel RAPL power capping driver, update devfreq core and
drivers, and clean up the cpupower utility.
Specifics:
- Rework the system-wide PM driver flags to make them easier to
understand and use and update their documentation (Rafael Wysocki,
Alan Stern).
- Allow cpuidle governors to be switched at run time regardless of
the kernel configuration and update the related documentation
accordingly (Hanjun Guo).
- Improve the resume device handling in the user space hibernarion
interface code (Domenico Andreoli).
- Document the intel-speed-select sysfs interface (Srinivas
Pandruvada).
- Make the ACPI code handing suspend to idle print more debug
messages to help diagnose issues with it (Rafael Wysocki).
- Fix a helper routine in the cpufreq core and correct a typo in the
struct cpufreq_driver kerneldoc comment (Rafael Wysocki, Wang
Wenhu).
- Update cpufreq drivers:
- Make the intel_pstate driver start in the passive mode by
default on systems without HWP (Rafael Wysocki).
- Add i.MX7ULP support to the imx-cpufreq-dt driver and add
i.MX7ULP to the cpufreq-dt-platdev blacklist (Peng Fan).
- Convert the qoriq cpufreq driver to a platform one, make the
platform code create a suitable device object for it and add
platform dependencies to it (Mian Yousaf Kaukab, Geert
Uytterhoeven).
- Fix wrong compatible binding in the qcom driver (Ansuel Smith).
- Build the omap driver by default for ARCH_OMAP2PLUS (Anders
Roxell).
- Add r8a7742 SoC support to the dt cpufreq driver (Lad
Prabhakar).
- Update cpuidle core and drivers:
- Fix three reference count leaks in error code paths in the
cpuidle core (Qiushi Wu).
- Convert Qualcomm SPM to a generic cpuidle driver (Stephan
Gerhold).
- Fix up the execution order when entering a domain idle state in
the PSCI driver (Ulf Hansson).
- Fix a reference counting issue related to clock management and
clean up two oddities in the PM-runtime framework (Rafael Wysocki,
Andy Shevchenko).
- Add ElkhartLake support to the Intel RAPL power capping driver and
remove an unused local MSR definition from it (Jacob Pan, Sumeet
Pawnikar).
- Update devfreq core and drivers:
- Replace strncpy() with strscpy() in the devfreq core and use
lockdep asserts instead of manual checks for a locked mutex in
it (Dmitry Osipenko, Krzysztof Kozlowski).
- Add a generic imx bus scaling driver and make it register an
interconnect device (Leonard Crestez, Gustavo A. R. Silva).
- Make the cpufreq notifier in the tegra30 driver take boosting
into account and delete an unuseful error message from that
driver (Dmitry Osipenko, Markus Elfring).
- Remove unneeded semicolon from the cpupower code (Zou Wei)"
* tag 'pm-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (51 commits)
cpuidle: Fix three reference count leaks
PM: runtime: Replace pm_runtime_callbacks_present()
PM / devfreq: Use lockdep asserts instead of manual checks for locked mutex
PM / devfreq: imx-bus: Fix inconsistent IS_ERR and PTR_ERR
PM / devfreq: Replace strncpy with strscpy
PM / devfreq: imx: Register interconnect device
PM / devfreq: Add generic imx bus scaling driver
PM / devfreq: tegra30: Delete an error message in tegra_devfreq_probe()
PM / devfreq: tegra30: Make CPUFreq notifier to take into account boosting
PM: hibernate: Restrict writes to the resume device
PM: runtime: clk: Fix clk_pm_runtime_get() error path
cpuidle: Convert Qualcomm SPM driver to a generic CPUidle driver
ACPI: EC: PM: s2idle: Extend GPE dispatching debug message
ACPI: PM: s2idle: Print type of wakeup debug messages
powercap: RAPL: remove unused local MSR define
PM: runtime: Make clear what we do when conditions are wrong in rpm_suspend()
Documentation: admin-guide: pm: Document intel-speed-select
PM: hibernate: Split off snapshot dev option
PM: hibernate: Incorporate concurrency handling
Documentation: ABI: make current_governer_ro as a candidate for removal
...
Merge updates from Andrew Morton:
"A few little subsystems and a start of a lot of MM patches.
Subsystems affected by this patch series: squashfs, ocfs2, parisc,
vfs. With mm subsystems: slab-generic, slub, debug, pagecache, gup,
swap, memcg, pagemap, memory-failure, vmalloc, kasan"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (128 commits)
kasan: move kasan_report() into report.c
mm/mm_init.c: report kasan-tag information stored in page->flags
ubsan: entirely disable alignment checks under UBSAN_TRAP
kasan: fix clang compilation warning due to stack protector
x86/mm: remove vmalloc faulting
mm: remove vmalloc_sync_(un)mappings()
x86/mm/32: implement arch_sync_kernel_mappings()
x86/mm/64: implement arch_sync_kernel_mappings()
mm/ioremap: track which page-table levels were modified
mm/vmalloc: track which page-table levels were modified
mm: add functions to track page directory modifications
s390: use __vmalloc_node in stack_alloc
powerpc: use __vmalloc_node in alloc_vm_stack
arm64: use __vmalloc_node in arch_alloc_vmap_stack
mm: remove vmalloc_user_node_flags
mm: switch the test_vmalloc module to use __vmalloc_node
mm: remove __vmalloc_node_flags_caller
mm: remove both instances of __vmalloc_node_flags
mm: remove the prot argument to __vmalloc_node
mm: remove the pgprot argument to __vmalloc
...
The non-cached vmalloc mapping was initially added as a hack for the
first-gen amigaone platform (6xx/book32s), isn't fully supported upstream,
and which used the legacy radeon driver together with non-coherent DMA.
However this only ever worked reliably for DRI .
Remove the hack as it is the last user of __vmalloc passing a page
protection flag other than PAGE_KERNEL and didn't do anything for other
platforms with non-coherent DMA.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Christophe Leroy <christophe.leroy@c-s.fr>
Cc: David Airlie <airlied@linux.ie>
Cc: Gao Xiang <xiang@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: "K. Y. Srinivasan" <kys@microsoft.com>
Cc: Laura Abbott <labbott@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Kelley <mikelley@microsoft.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Sakari Ailus <sakari.ailus@linux.intel.com>
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Wei Liu <wei.liu@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Paul Mackerras <paulus@ozlabs.org>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will@kernel.org>
Link: http://lkml.kernel.org/r/20200414131348.444715-21-hch@lst.de
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is always PAGE_KERNEL - for long term mappings with other properties
vmap should be used.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Christophe Leroy <christophe.leroy@c-s.fr>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: David Airlie <airlied@linux.ie>
Cc: Gao Xiang <xiang@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: "K. Y. Srinivasan" <kys@microsoft.com>
Cc: Laura Abbott <labbott@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Kelley <mikelley@microsoft.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Sakari Ailus <sakari.ailus@linux.intel.com>
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Wei Liu <wei.liu@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Paul Mackerras <paulus@ozlabs.org>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will@kernel.org>
Link: http://lkml.kernel.org/r/20200414131348.444715-19-hch@lst.de
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Doing a "get_user_pages()" on a copy-on-write page for reading can be
ambiguous: the page can be COW'ed at any time afterwards, and the
direction of a COW event isn't defined.
Yes, whoever writes to it will generally do the COW, but if the thread
that did the get_user_pages() unmapped the page before the write (and
that could happen due to memory pressure in addition to any outright
action), the writer could also just take over the old page instead.
End result: the get_user_pages() call might result in a page pointer
that is no longer associated with the original VM, and is associated
with - and controlled by - another VM having taken it over instead.
So when doing a get_user_pages() on a COW mapping, the only really safe
thing to do would be to break the COW when getting the page, even when
only getting it for reading.
At the same time, some users simply don't even care.
For example, the perf code wants to look up the page not because it
cares about the page, but because the code simply wants to look up the
physical address of the access for informational purposes, and doesn't
really care about races when a page might be unmapped and remapped
elsewhere.
This adds logic to force a COW event by setting FOLL_WRITE on any
copy-on-write mapping when FOLL_GET (or FOLL_PIN) is used to get a page
pointer as a result.
The current semantics end up being:
- __get_user_pages_fast(): no change. If you don't ask for a write,
you won't break COW. You'd better know what you're doing.
- get_user_pages_fast(): the fast-case "look it up in the page tables
without anything getting mmap_sem" now refuses to follow a read-only
page, since it might need COW breaking. Which happens in the slow
path - the fast path doesn't know if the memory might be COW or not.
- get_user_pages() (including the slow-path fallback for gup_fast()):
for a COW mapping, turn on FOLL_WRITE for FOLL_GET/FOLL_PIN, with
very similar semantics to FOLL_FORCE.
If it turns out that we want finer granularity (ie "only break COW when
it might actually matter" - things like the zero page are special and
don't need to be broken) we might need to push these semantics deeper
into the lookup fault path. So if people care enough, it's possible
that we might end up adding a new internal FOLL_BREAK_COW flag to go
with the internal FOLL_COW flag we already have for tracking "I had a
COW".
Alternatively, if it turns out that different callers might want to
explicitly control the forced COW break behavior, we might even want to
make such a flag visible to the users of get_user_pages() instead of
using the above default semantics.
But for now, this is mostly commentary on the issue (this commit message
being a lot bigger than the patch, and that patch in turn is almost all
comments), with that minimal "enable COW breaking early" logic using the
existing FOLL_WRITE behavior.
[ It might be worth noting that we've always had this ambiguity, and it
could arguably be seen as a user-space issue.
You only get private COW mappings that could break either way in
situations where user space is doing cooperative things (ie fork()
before an execve() etc), but it _is_ surprising and very subtle, and
fork() is supposed to give you independent address spaces.
So let's treat this as a kernel issue and make the semantics of
get_user_pages() easier to understand. Note that obviously a true
shared mapping will still get a page that can change under us, so this
does _not_ mean that get_user_pages() somehow returns any "stable"
page ]
Reported-by: Jann Horn <jannh@google.com>
Tested-by: Christoph Hellwig <hch@lst.de>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Kirill Shutemov <kirill@shutemov.name>
Acked-by: Jan Kara <jack@suse.cz>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
fake_lmem_start does not need to be mutable via module param sysfs. It's
only used during driver probe.
Fixes: 1629224324 ("drm/i915/lmem: add the fake lmem region")
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200601215510.18379-2-jani.nikula@intel.com
(cherry picked from commit f322e851f2)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Allow batch buffers to read their own _local_ cumulative HW runtime of
their logical context.
Fixes: 0f2f397583 ("drm/i915: Add gen9 BCS cmdparsing")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: <stable@vger.kernel.org> # v5.4+
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200601161942.30854-1-chris@chris-wilson.co.uk
(cherry picked from commit f9496520df)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
While the current locking/serialization of the global state
suffices for protecting the obj->state access and the actual
hardware reprogramming, we do have a problem with accessing
the old/new states during nonblocking commits.
The state computation and swap will be protected by the crtc
locks, but the commit_tails can finish out of order, thus also
causing the atomic states to be cleaned up out of order. This
would mean the commit that started first but finished last has
had its new state freed as the no-longer-needed old state by the
other commit.
To fix this let's just refcount the states. obj->state amounts
to one reference, and the intel_atomic_state holds extra references
to both its new and old global obj states.
Fixes: 0ef1905ecf ("drm/i915: Introduce better global state handling")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200527200245.13184-1-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
(cherry picked from commit f8c86ffa28)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
This is causing multiple armv7 missing do_div() errors, so lets drop it
for now.
This reverts commit 04d9044f6c.
Cc: Kalyan Thota <kalyan_t@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Pull uaccess/readdir updates from Al Viro:
"Finishing the conversion of readdir.c to unsafe_... API.
This includes the uaccess_{read,write}_begin series by Christophe
Leroy"
* 'uaccess.readdir' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
readdir.c: get rid of the last __put_user(), drop now-useless access_ok()
readdir.c: get compat_filldir() more or less in sync with filldir()
switch readdir(2) to unsafe_copy_dirent_name()
drm/i915/gem: Replace user_access_begin by user_write_access_begin
uaccess: Selectively open read or write user access
uaccess: Add user_read_access_begin/end and user_write_access_begin/end
Pull uaccess/access_ok updates from Al Viro:
"Removals of trivially pointless access_ok() calls.
Note: the fiemap stuff was removed from the series, since they are
duplicates with part of ext4 series carried in Ted's tree"
* 'uaccess.access_ok' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
vmci_host: get rid of pointless access_ok()
hfi1: get rid of pointless access_ok()
usb: get rid of pointless access_ok() calls
lpfc_debugfs: get rid of pointless access_ok()
efi_test: get rid of pointless access_ok()
drm_read(): get rid of pointless access_ok()
via-pmu: don't bother with access_ok()
drivers/crypto/ccp/sev-dev.c: get rid of pointless access_ok()
omapfb: get rid of pointless access_ok() calls
amifb: get rid of pointless access_ok() calls
drivers/fpga/dfl-afu-dma-region.c: get rid of pointless access_ok()
drivers/fpga/dfl-fme-pr.c: get rid of pointless access_ok()
cm4000_cs.c cmm_ioctl(): get rid of pointless access_ok()
nvram: drop useless access_ok()
n_hdlc_tty_read(): remove pointless access_ok()
tomoyo_write_control(): get rid of pointless access_ok()
btrfs_ioctl_send(): don't bother with access_ok()
fat_dir_ioctl(): hadn't needed that access_ok() for more than a decade...
dlmfs_file_write(): get rid of pointless access_ok()
set from Mauro toward the completion of the RST conversion. I *really*
hope we are getting close to the end of this. Meanwhile, those patches
reach pretty far afield to update document references around the tree;
there should be no actual code changes there. There will be, alas, more of
the usual trivial merge conflicts.
Beyond that we have more translations, improvements to the sphinx
scripting, a number of additions to the sysctl documentation, and lots of
fixes.
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAl7VId8PHGNvcmJldEBs
d24ubmV0AAoJEBdDWhNsDH5Yq/gH/iaDgirQZV6UZ2v9sfwQNYolNpf2sKAuOZjd
bPFB7WJoMQbKwQEvYrAUL2+5zPOcLYuIfzyOfo1BV1py+EyKbACcKjI4AedxfJF7
+NchmOBhlEqmEhzx2U08HRc4/8J223WG17fJRVsV3p+opJySexSFeQucfOciX5NR
RUCxweWWyg/FgyqjkyMMTtsePqZPmcT5dWTlVXISlbWzcv5NFhuJXnSrw8Sfzcmm
SJMzqItv3O+CabnKQ8kMLV2PozXTMfjeWH47ZUK0Y8/8PP9+cvqwFzZ0UDQJ1Xaz
oyW/TqmunaXhfMsMFeFGSwtfgwRHvXdxkQdtwNHvo1dV4dzTvDw=
=fDC/
-----END PGP SIGNATURE-----
Merge tag 'docs-5.8' of git://git.lwn.net/linux
Pull documentation updates from Jonathan Corbet:
"A fair amount of stuff this time around, dominated by yet another
massive set from Mauro toward the completion of the RST conversion. I
*really* hope we are getting close to the end of this. Meanwhile,
those patches reach pretty far afield to update document references
around the tree; there should be no actual code changes there. There
will be, alas, more of the usual trivial merge conflicts.
Beyond that we have more translations, improvements to the sphinx
scripting, a number of additions to the sysctl documentation, and lots
of fixes"
* tag 'docs-5.8' of git://git.lwn.net/linux: (130 commits)
Documentation: fixes to the maintainer-entry-profile template
zswap: docs/vm: Fix typo accept_threshold_percent in zswap.rst
tracing: Fix events.rst section numbering
docs: acpi: fix old http link and improve document format
docs: filesystems: add info about efivars content
Documentation: LSM: Correct the basic LSM description
mailmap: change email for Ricardo Ribalda
docs: sysctl/kernel: document unaligned controls
Documentation: admin-guide: update bug-hunting.rst
docs: sysctl/kernel: document ngroups_max
nvdimm: fixes to maintainter-entry-profile
Documentation/features: Correct RISC-V kprobes support entry
Documentation/features: Refresh the arch support status files
Revert "docs: sysctl/kernel: document ngroups_max"
docs: move locking-specific documents to locking/
docs: move digsig docs to the security book
docs: move the kref doc into the core-api book
docs: add IRQ documentation at the core-api book
docs: debugging-via-ohci1394.txt: add it to the core-api book
docs: fix references for ipmi.rst file
...
- remove a now unnecessary usage of the KERNEL_DS for
sys_oabi_epoll_ctl()
- update my email address in a number of drivers
- decompressor EFI updates from Ard Biesheuvel
- module unwind section handling updates
- sparsemem Kconfig cleanups
- make act_mm macro respect THREAD_SIZE
-----BEGIN PGP SIGNATURE-----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=vMHE
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm
Pull ARM updates from Russell King:
- remove a now unnecessary usage of the KERNEL_DS for
sys_oabi_epoll_ctl()
- update my email address in a number of drivers
- decompressor EFI updates from Ard Biesheuvel
- module unwind section handling updates
- sparsemem Kconfig cleanups
- make act_mm macro respect THREAD_SIZE
* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
ARM: 8980/1: Allow either FLATMEM or SPARSEMEM on the multiplatform build
ARM: 8979/1: Remove redundant ARCH_SPARSEMEM_DEFAULT setting
ARM: 8978/1: mm: make act_mm() respect THREAD_SIZE
ARM: decompressor: run decompressor in place if loaded via UEFI
ARM: decompressor: move GOT into .data for EFI enabled builds
ARM: decompressor: defer loading of the contents of the LC0 structure
ARM: decompressor: split off _edata and stack base into separate object
ARM: decompressor: move headroom variable out of LC0
ARM: 8976/1: module: allow arch overrides for .init section names
ARM: 8975/1: module: fix handling of unwind init sections
ARM: 8974/1: use SPARSMEM_STATIC when SPARSEMEM is enabled
ARM: 8971/1: replace the sole use of a symbol with its definition
ARM: 8969/1: decompressor: simplify libfdt builds
Update rmk's email address in various drivers
ARM: compat: remove KERNEL_DS usage in sys_oabi_epoll_ctl()
- Add AMD Fam17h RAPL support
- Introduce CAP_PERFMON to kernel and user space
- Add Zhaoxin CPU support
- Misc fixes and cleanups
Tooling changes:
perf record:
- Introduce --switch-output-event to use arbitrary events to be setup
and read from a side band thread and, when they take place a signal
be sent to the main 'perf record' thread, reusing the --switch-output
code to take perf.data snapshots from the --overwrite ring buffer, e.g.:
# perf record --overwrite -e sched:* \
--switch-output-event syscalls:*connect* \
workload
will take perf.data.YYYYMMDDHHMMSS snapshots up to around the
connect syscalls.
- Add --num-synthesize-threads option to control degree of parallelism of the
synthesize_mmap() code which is scanning /proc/PID/task/PID/maps and can be
time consuming. This mimics pre-existing behaviour in 'perf top'.
perf bench:
- Add a multi-threaded synthesize benchmark.
- Add kallsyms parsing benchmark.
Intel PT support:
- Stitch LBR records from multiple samples to get deeper backtraces,
there are caveats, see the csets for details.
- Allow using Intel PT to synthesize callchains for regular events.
- Add support for synthesizing branch stacks for regular events (cycles,
instructions, etc) from Intel PT data.
Misc changes:
- Updated perf vendor events for power9 and Coresight.
- Add flamegraph.py script via 'perf flamegraph'
- Misc other changes, fixes and cleanups - see the Git log for details.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=i27M
-----END PGP SIGNATURE-----
Merge tag 'perf-core-2020-06-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf updates from Ingo Molnar:
"Kernel side changes:
- Add AMD Fam17h RAPL support
- Introduce CAP_PERFMON to kernel and user space
- Add Zhaoxin CPU support
- Misc fixes and cleanups
Tooling changes:
- perf record:
Introduce '--switch-output-event' to use arbitrary events to be
setup and read from a side band thread and, when they take place a
signal be sent to the main 'perf record' thread, reusing the core
for '--switch-output' to take perf.data snapshots from the ring
buffer used for '--overwrite', e.g.:
# perf record --overwrite -e sched:* \
--switch-output-event syscalls:*connect* \
workload
will take perf.data.YYYYMMDDHHMMSS snapshots up to around the
connect syscalls.
Add '--num-synthesize-threads' option to control degree of
parallelism of the synthesize_mmap() code which is scanning
/proc/PID/task/PID/maps and can be time consuming. This mimics
pre-existing behaviour in 'perf top'.
- perf bench:
Add a multi-threaded synthesize benchmark and kallsyms parsing
benchmark.
- Intel PT support:
Stitch LBR records from multiple samples to get deeper backtraces,
there are caveats, see the csets for details.
Allow using Intel PT to synthesize callchains for regular events.
Add support for synthesizing branch stacks for regular events
(cycles, instructions, etc) from Intel PT data.
Misc changes:
- Updated perf vendor events for power9 and Coresight.
- Add flamegraph.py script via 'perf flamegraph'
- Misc other changes, fixes and cleanups - see the Git log for details
Also, since over the last couple of years perf tooling has matured and
decoupled from the kernel perf changes to a large degree, going
forward Arnaldo is going to send perf tooling changes via direct pull
requests"
* tag 'perf-core-2020-06-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (163 commits)
perf/x86/rapl: Add AMD Fam17h RAPL support
perf/x86/rapl: Make perf_probe_msr() more robust and flexible
perf/x86/rapl: Flip logic on default events visibility
perf/x86/rapl: Refactor to share the RAPL code between Intel and AMD CPUs
perf/x86/rapl: Move RAPL support to common x86 code
perf/core: Replace zero-length array with flexible-array
perf/x86: Replace zero-length array with flexible-array
perf/x86/intel: Add more available bits for OFFCORE_RESPONSE of Intel Tremont
perf/x86/rapl: Add Ice Lake RAPL support
perf flamegraph: Use /bin/bash for report and record scripts
perf cs-etm: Move definition of 'traceid_list' global variable from header file
libsymbols kallsyms: Move hex2u64 out of header
libsymbols kallsyms: Parse using io api
perf bench: Add kallsyms parsing
perf: cs-etm: Update to build with latest opencsd version.
perf symbol: Fix kernel symbol address display
perf inject: Rename perf_evsel__*() operating on 'struct evsel *' to evsel__*()
perf annotate: Rename perf_evsel__*() operating on 'struct evsel *' to evsel__*()
perf trace: Rename perf_evsel__*() operating on 'struct evsel *' to evsel__*()
perf script: Rename perf_evsel__*() operating on 'struct evsel *' to evsel__*()
...
- RCU-tasks update, including addition of RCU Tasks Trace for
BPF use and TASKS_RUDE_RCU
- kfree_rcu() updates.
- Remove scheduler locking restriction
- RCU CPU stall warning updates.
- Torture-test updates.
- Miscellaneous fixes and other updates.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=Yisx
-----END PGP SIGNATURE-----
Merge tag 'core-rcu-2020-06-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull RCU updates from Ingo Molnar:
"The RCU updates for this cycle were:
- RCU-tasks update, including addition of RCU Tasks Trace for BPF use
and TASKS_RUDE_RCU
- kfree_rcu() updates.
- Remove scheduler locking restriction
- RCU CPU stall warning updates.
- Torture-test updates.
- Miscellaneous fixes and other updates"
* tag 'core-rcu-2020-06-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (103 commits)
rcu: Allow for smp_call_function() running callbacks from idle
rcu: Provide rcu_irq_exit_check_preempt()
rcu: Abstract out rcu_irq_enter_check_tick() from rcu_nmi_enter()
rcu: Provide __rcu_is_watching()
rcu: Provide rcu_irq_exit_preempt()
rcu: Make RCU IRQ enter/exit functions rely on in_nmi()
rcu/tree: Mark the idle relevant functions noinstr
x86: Replace ist_enter() with nmi_enter()
x86/mce: Send #MC singal from task work
x86/entry: Get rid of ist_begin/end_non_atomic()
sched,rcu,tracing: Avoid tracing before in_nmi() is correct
sh/ftrace: Move arch_ftrace_nmi_{enter,exit} into nmi exception
lockdep: Always inline lockdep_{off,on}()
hardirq/nmi: Allow nested nmi_enter()
arm64: Prepare arch_nmi_enter() for recursion
printk: Disallow instrumenting print_nmi_enter()
printk: Prepare for nested printk_nmi_enter()
rcutorture: Convert ULONG_CMP_LT() to time_before()
torture: Add a --kasan argument
torture: Save a few lines by using config_override_param initially
...
With the advent of preempt-to-busy, a request may still be on the GPU as
we unwind. And in the case of a unpreemptible [due to HW] request, that
request will remain indefinitely on the GPU even though we have
returned it back to our submission queue, and cleared the active bit.
We only run the execution callbacks on transferring the request from our
submission queue to the execution queue, but if this is a bonded request
that the HW is waiting for, we will not submit it (as we wait for a
fresh execution) even though it is still being executed.
As we know that there are always preemption points between requests, we
know that only the currently executing request may be still active even
though we have cleared the flag. However, we do not precisely know which
request is in ELSP[0] due to a delay in processing events, and
furthermore we only store the last request in a context in our state
tracker.
Fixes: 22b7a426bb ("drm/i915/execlists: Preempt-to-busy")
Testcase: igt/gem_exec_balancer/bonded-dual
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200529143926.3245-1-chris@chris-wilson.co.uk
(cherry picked from commit b55230e5e8)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
When we push a virtual request onto the HW, we update the rq->engine to
point to the physical engine. A request that is then submitted by the
user that waits upon the virtual engine, but along the physical engine
in use, will then see that it is due to be submitted to the same engine
and take a shortcut (and be queued without waiting for the completion
fence). However, the virtual request may be preempted (either by higher
priority users, or by timeslicing) and removed from the physical engine
to be migrated over to one of its siblings. The dependent normal request
however is oblivious to the removal of the virtual request and remains
queued to execute on HW, believing that once it reaches the head of its
queue all of its predecessors will have completed executing!
v2: Beware restriction of signal->execution_mask prior to submission.
Fixes: 6d06779e86 ("drm/i915: Load balancing across a virtual engine")
Testcase: igt/gem_exec_balancer/sliced
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: <stable@vger.kernel.org> # v5.3+
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200526090753.11329-2-chris@chris-wilson.co.uk
(cherry picked from commit 511b6d9aed)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reorder the code so that we can reuse the await_execution from a special
case in await_request in the next patch.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200526090753.11329-1-chris@chris-wilson.co.uk
(cherry picked from commit ffb0c600c2)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
The audio driver can call into nouveau right while we're in the middle
of re-fetching the EDID, and decide it no longer needs to be awake.
Stop depending on EDID in the audio component get_eld() callback, and
instead cache whether audio support is present from the prior modeset.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
This is a SOR register, and not indexed by the bound head.
Fixes display not coming up on high-bandwidth HDMI displays under a
number of configurations.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
This reverts commit 96cb7cf13d.
This change was used for DCN2 bringup and is no longer desired.
In fact it breaks backlight on DCN2 systems.
Cc: Alexander Monakov <amonakov@ispras.ru>
Cc: Hersen Wu <hersenxs.wu@amd.com>
Cc: Anthony Koo <Anthony.Koo@amd.com>
Cc: Michael Chiu <Michael.Chiu@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reported-and-tested-by: Alexander Monakov <amonakov@ispras.ru>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
There will be no further interrupt without proper ack
for current one.
V2: fix typo to really set ACK bit only
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Return an error for sysfs and debugfs power interfaces during
gpu reset and suspend. Prevents access to the hw while it may
be in an unusable state.
v2: squash in fix to drop suspend check
Acked-by: Nirmoy Das <nirmoy.das@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
comparison
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCXs+b2wAKCRDj7w1vZxhR
xdZ9AQC9uquqrOAGV8Falzp+Obu1MDp7nu8zrKH35jWt+UtONwEAk8TsnMAq7y18
Bi4cAke59vX/YLiMaN8EamJs67FGsw0=
=zcXf
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-fixes-2020-05-28' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
Two ingenic fixes, one for a wrong cast, the other for a typo in a
comparison
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20200528110944.hanv4qgc6w7whnj3@gilmour.lan
There's a fix for panel brighness on Lenovo X13 Yoga devices and a fix for
-Wformat warnings on architectures where atomic-64 counters are not of
type unsigned long long.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEchf7rIzpz2NEoWjlaA3BHVMLeiMFAl7OHdgACgkQaA3BHVML
eiOhzwgAom+GR5PrDEpLdqdlmBGPgMoefyDlUZMLk22eaPlYaAQxSbyMjBogPu4Q
7Xw1tHTMrErAOMi/SwumoDfGZ/B/WfjzQuBtobAcPZLd5QaV5PioPFgF28yl17oc
/ykob8DeyOa9tD8HnZD6ZZKTFCOzwjhqWEW//w523fiwFc965l/BoHDq0i11Ze8g
nJ7iDU9eCOmS28Loozbttx0MBDTi/ZXF5LLmioL9N4V+OH+4LMkHXn1ZrQ1TqbBm
ZuiRw7dupUAu6PIAAWxjbwmiVBksU8iS+GKwuLQ9He1tjybC2UZXu02uzzgROj/h
00paLMLlmqtp9JkKvapAGGyW65967Q==
=ldcO
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-fixes-2020-05-27' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
Short summary of fixes pull (less than what git shortlog provides):
There's a fix for panel brighness on Lenovo X13 Yoga devices and a fix for
-Wformat warnings on architectures where atomic-64 counters are not of
type unsigned long long.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20200527080123.GA8186@linux-uq9g
[Why]
If VUPDATE_END is before VUPDATE_START the delay calculated can become
very large, causing a soft hang.
[How]
Take the absolute value of the difference between START and END.
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
get_cursor_position already handles the case where the cursor has
negative off-screen coordinates by not setting
dc_cursor_position.enabled.
Signed-off-by: Simon Ser <contact@emersion.fr>
Fixes: 626bf90fe0 ("drm/amd/display: add basic atomic check for cursor plane")
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
If VUPDATE_END is before VUPDATE_START the delay calculated can become
very large, causing a soft hang.
[How]
Take the absolute value of the difference between START and END.
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
get_cursor_position already handles the case where the cursor has
negative off-screen coordinates by not setting
dc_cursor_position.enabled.
Signed-off-by: Simon Ser <contact@emersion.fr>
Fixes: 626bf90fe0 ("drm/amd/display: add basic atomic check for cursor plane")
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Pull cgroup fixes from Tejun Heo:
- Reverted stricter synchronization for cgroup recursive stats which
was prepping it for event counter usage which never got merged. The
change was causing performation regressions in some cases.
- Restore bpf-based device-cgroup operation even when cgroup1 device
cgroup is disabled.
- An out-param init fix.
* 'for-5.7-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
device_cgroup: Cleanup cgroup eBPF device filter code
xattr: fix uninitialized out-param
Revert "cgroup: Add memory barriers to plug cgroup_rstat_updated() race window"
the origin design will use varible of "attr->states" to save node
supported states on current gpu device, but for multi gpu device, when
probe second gpu device, the driver will check attribute node states
from previous gpu device wthether to create attribute node.
it will cause other gpu device create attribute node faild.
1. add member attr_list into amdgpu_device to link supported device attribute node.
2. add new structure "struct amdgpu_device_attr_entry{}" to track device attribute state.
3. drop member "states" from amdgpu_device_attr.
v2:
1. move "attr_list" into amdgpu_pm and rename to "pm_attr_list".
2. refine create & remove device node functions parameter.
fix:
drm/amdgpu: optimize amdgpu device attribute code
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
nouveau was calling the fbdev API which has issues with modules
and built-ins. Call the correct API.
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Fixes: 2dd4d163cd ("drm/nouveau: remove open-coded version of remove_conflicting_pci_framebuffers()")
Link: https://lore.kernel.org/lkml/21b52c28-3ace-cd13-d8ce-f38f2c6b2a96@infradead.org/T/#u
Signed-off-by: Dave Airlie <airlied@redhat.com>
the entry point for the DRM subsystem.
Replace clk-provider.h include with of_clk.h for mach-mediatek
-----BEGIN PGP SIGNATURE-----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=v4ft
-----END PGP SIGNATURE-----
Merge tag 'v5.7-next-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into arm/drivers
Refactor the mmsys to reflect that it's a clock driver and
the entry point for the DRM subsystem.
Replace clk-provider.h include with of_clk.h for mach-mediatek
* tag 'v5.7-next-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux:
ARM: mediatek: Replace <linux/clk-provider.h> by <linux/of_clk.h>
soc: mediatek: Missing platform_device_unregister() on error in mtk_mmsys_probe()
soc: mediatek: mmsys: Drop <linux/clk-provider.h>
soc / drm: mediatek: Fix mediatek-drm device probing
soc / drm: mediatek: Move routing control to mmsys device
clk / soc: mediatek: Move mt8173 MMSYS to platform driver
dt-bindings: mediatek: Update mmsys binding to reflect it is a system controller
drm/mediatek: Omit warning on probe defers
Link: https://lore.kernel.org/r/2cf27d33-59c6-023b-9993-57a2639824ea@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
In order to be valid to dereference during the i915_fence_release, after
retiring the fence and releasing its refererences, we assume that
rq->engine can only be a real engine (that stay intact until the device
is shutdown after all fences have been flushed). However, due to a quirk
of preempt-to-busy, we may retire a request that still belongs to a
virtual engine and so eventually free it with rq->engine being invalid.
To avoid dereferencing that invalid engine, we look at the
execution_mask which if it indicates it may be executed on more than one
engine, we know it originated on a virtual engine and may still be on
one.
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/1906
Fixes: 43acd6516c ("drm/i915: Keep a per-engine request pool")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200521140617.30015-2-chris@chris-wilson.co.uk
(cherry picked from commit 32a4605b38)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Since the removal of the no-semaphore boosting, we rely on timeslicing to
reorder passed inter-dependency hogs across the engines. However, we
require preemption to support timeslicing into user payloads, and not all
machine support preemption so we do not universally enable timeslicing,
even when it would correctly preempt our own inter-engine semaphores.
Since timeslicing and semaphore priority deboosting is now disabled on
Broadwell/Braswell, we have to follow suite and not use semaphores.
Testcase: igt/gem_exec_schedule/semaphore-codependency # bdw/bsw
Fixes: 18e4af04d2 ("drm/i915: Drop no-semaphore boosting")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200521140617.30015-1-chris@chris-wilson.co.uk
(cherry picked from commit 0eb670aac2)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
This assertion was removed in commit b412c63f1c ("drm/i915/gt: Report
context-is-closed prior to pinning"), but accidentally restored by a
cherry-pick into drm-next and now has percolated back to
drm-intel-next-queued.
Fixes: 2e46a2a0b0 ("drm/i915: Use explicit flag to mark unreachable intel_context")
Fixes: 2b703bbda2 ("Merge drm/drm-next into drm-intel-next-queued")
References: b412c63f1c ("drm/i915/gt: Report context-is-closed prior to pinning")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200520073048.2394034-1-chris@chris-wilson.co.uk
(cherry picked from commit f2c1061a36)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
We recorded the execlists->queue_priority_hint update for the inflight
request without kicking the tasklet. The next submitted request then
failed to be scheduled as it had a lower priority than the hint, leaving
the HW running with only the inflight request.
Fixes: 6cebcf746f ("drm/i915: Tweak scheduler's kick_submission()")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200519063123.20673-1-chris@chris-wilson.co.uk
(cherry picked from commit b86fc6e5e8)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Also skip the newly added HFI set freq path if the GMU is powered down,
which was missing because of patches crossing paths.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Instead of using a bare unsigned type for the length value for map/unmap
functions pass in a size_t to more correctly match up with the underlying
APIs.
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Tested-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Refactor how address space initialization works. Instead of having the
address space function create the MMU object (and thus require separate but
equal functions for gpummu and iommu) use a single function and pass the
MMU struct in. Make the generic code cleaner by using target specific
functions to create the address space so a2xx can do its own thing in its
own space. For all the other targets use a generic helper to initialize
IOMMU but leave the door open for newer targets to use customization
if they need it.
Reviewed-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Tested-by: Shawn Guo <shawn.guo@linaro.org>
[squash in rebase fixups]
Signed-off-by: Rob Clark <robdclark@chromium.org>
Everywhere an IOMMU object is created by msm_gpu_create_address_space
the IOMMU device is attached immediately after. Instead of carrying around
the infrastructure to do the attach from the device specific code do it
directly in the msm_iommu_init() function. This gets it out of the way for
more aggressive cleanups that follow.
Reviewed-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Tested-by: Shawn Guo <shawn.guo@linaro.org>
[squash in rebase fixups and fix for unused fxn]
Signed-off-by: Rob Clark <robdclark@chromium.org>
On some architectures like ppc64le and aarch64, compiling with
-Wformat=1 will throw the following warnings:
In file included from drivers/gpu/drm/drm_vblank.c:33:
drivers/gpu/drm/drm_vblank.c: In function 'drm_update_vblank_count':
drivers/gpu/drm/drm_vblank.c:273:16: warning: format '%llu' expects
argument of type 'long long unsigned int', but argument 4 has type
'long int' [-Wformat=]
DRM_DEBUG_VBL("updating vblank count on crtc %u:"
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
./include/drm/drm_print.h:407:22: note: in definition of macro
'DRM_DEBUG_VBL'
drm_dbg(DRM_UT_VBL, fmt, ##__VA_ARGS__)
^~~
drivers/gpu/drm/drm_vblank.c:274:22: note: format string is defined here
" current=%llu, diff=%u, hw=%u hw_last=%u\n",
~~~^
%lu
So, fix that with a typecast.
Co-developed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20200521204647.2578479-1-lyude@redhat.com
This fixes an intermittent bug where a root PD clear operation still in
progress could overwrite a PDE update done by the CPU, resulting in a
VM fault.
Fixes: 108b4d928c ("drm/amd/amdgpu: Update VM function pointer")
Reported-by: Jay Cornwall <Jay.Cornwall@amd.com>
Tested-by: Jay Cornwall <Jay.Cornwall@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Previously we used the s3 codepath for gpu reset. This can lead to issues in
certain case where we end of waiting for fences which will never come (because
parts of the hw are off due to gpu reset) and we end up waiting forever causing
a deadlock.
[How]
Handle GPU reset separately from normal s3 case. We essentially need to redo
everything we do in s3, but avoid any drm calls.
For GPU reset case
suspend:
-Acquire DC lock
-Cache current dc_state
-Commit 0 stream/planes to dc (this puts dc into a state where it can be
powered off)
-Disable interrupts
resume
-Edit cached state to force full update
-Commit cached state from suspend
-Build stream and plane updates from the cached state
-Commit stream/plane updates
-Enable interrupts
-Release DC lock
v2:
-Formatting
-Release dc_state
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add some APU flags to simplify handling of different APU
variants. It's easier to understand the special cases
if we use names flags rather than checking device ids and
silicon revisions.
v2: rebase on latest code
Acked-by: Evan Quan <evan.quan@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Problem description]
1. Boot up picasso platform, launches desktop, Don't do anything (APU enter into "gfxoff" state)
2. Remote login to platform using SSH, then type the command line:
sudo su -c "echo manual > /sys/class/drm/card0/device/power_dpm_force_performance_level"
sudo su -c "echo 2 > /sys/class/drm/card0/device/pp_dpm_sclk" (fix SCLK to 1400MHz)
3. Move the mouse around in Window
4. Phenomenon : The screen frozen
Tester will switch sclk level during glmark2 run time.
APU will enter "gfxoff" state intermittently during glmark2 run time.
The system got hanged if fix GFXCLK to 1400MHz when APU is in "gfxoff"
state.
[Debug]
1. Fix SCLK to X MHz
1400: screen frozen, screen black, then OS will reboot.
1300: screen frozen.
1200: screen frozen, screen black.
1100: screen frozen, screen black, then OS will reboot.
1000: screen frozen, screen black.
900: screen frozen, screen black, then OS will reboot.
800: Situation Nomal, issue disappear.
700: Situation Nomal, issue disappear.
2. SBIOS setting: AMD CBS --> SMU Debug Options -->SMU Debug --> "GFX DLDO Psm Margin Control":
50 : Situation Nomal, issue disappear.
45 : Situation Nomal, issue disappear.
40 : Situation Nomal, issue disappear.
35 : Situation Nomal, issue disappear.
30 : screen black.
25 : screen frozen, then blurred screen.
20 : screen frozen.
15 : screen black.
10 : screen frozen.
5 : screen frozen, then blurred screen.
3. Disable GFXOFF feature
Situation Nomal, issue disappear.
[Why]
Through a period of time debugging with Sys Eng team and SMU team, Sys
Eng team said this is voltage/frequency marginal issue not a F/W or H/W
bug. This experiment proves that default targetPsm [for f=1400MHz] is
not sufficient when GFXOFF is enabled on Picasso.
SMU team think it is an odd test conditions to force sclk="1400MHz" when
GPU is in "gfxoff" state，then wake up the GFX. SCLK should be in the
"lowest frequency" when gfxoff.
[How]
Disable gfxoff when setting manual mode.
Enable gfxoff when setting other mode(exiting manual mode) again.
By the way, from the user point of view, now that user switch to manual
mode and force SCLK Frequency, he don't want SCLK be controlled by
workload.It becomes meaningless to "switch to manual mode" if APU enter "gfxoff"
due to lack of workload at this point.
Tips: Same issue observed on Raven.
Signed-off-by: chen gong <curry.gong@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix typos that prevented them from showing up.
v2: switch other files in addition to pp_clk_voltage
Fixes: 4e01847c38 ("drm/amdgpu: optimize amdgpu device attribute code")
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1150
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Evan Quan <evan.quan@amd.com>
We need to get the silicon revision id before we parse
the firmware in order to load the correct gpu info firmware
for raven2 variants.
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1103
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Move it into the fw_info function since it's logically part
of the same functionality.
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes: 4259ff7ae5 ("drm/msm/dpu: add support for pcc color block in dpu driver")
Signed-off-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Fixes: 8167e6fa76 ("drm/msm/a6xx: HFI v2 for A640 and A650")
Signed-off-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Rob Clark <robdclark@chromium.org>
- HD audio fixes on recent systems
- vGPU detection (fail probe if we're on one, for now)
- Interlaced mode fixes (mostly avoidance on Turing, which doesn't support it)
- SVM improvements/fixes
- NVIDIA format modifier support
- Misc other fixes.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Ben Skeggs <skeggsb@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ <CACAvsv6DcRFMDVEftdL7LxNtxuSQQ=qnfqdHXO0K=BmJ8Q2-+g@mail.gmail.com
-----BEGIN PGP SIGNATURE-----
iQJMBAABCgA2FiEEACwLKSDmq+9RDv5P4cpzo8lZTiQFAl7FwFkYHGNodW5rdWFu
Zy5odUBrZXJuZWwub3JnAAoJEOHKc6PJWU4khCkP/1ZKyyJd83FLQZ142j5KD64j
XeiJ7xxVNIjMcgJMLImOevF3XbNuON58D0xwcU+06yrUntt7qbWztug0OrmZvRiI
H4qxMXf5Yp/5EFGCVXrKw+UP9LPcYas2z2aD7WWI9p1NI6SQIBsazWu01daMd87U
GbxTg5xpOT0rFt6fpTpRyWEeQD2AALDRWTovxG1VfmYB5ZnioBk29vReSPQA93Un
HZhBQPTvj3NBgFtqhZQlS+4nr8CnAcJs++fcAKHnSJyQ3klmLcYIux8fKSRCd81W
F7dzshL1S1tPgFnU/CegiysfdEZX1FEaYSuzk6ALKAV6s/Xz+qz9FdUVZYxcE/2s
eG1fCXu6OVg1JYoFRO4ZcyfuMDHNwZzhyRb58atCN5s2gJwY+nID5nRiyFrPTA47
J+1cJubk/n3mWyezZp2oqo6u2a74C80RPMgjpAAG3VPoQGvEvUuNZXn4u5idpixT
LDYyMfdgJNL+cP78+y2WXFfAqUtg8A7IfnisT5teSr5t+HQ74H57mBb5muYehKhu
6gzyBkj5Nen1NIpwF+v0EX73PtzpUWmzk6AT6/8lrfq6Sjf3WTBzGeiI4e0vrUs9
aqIYRImMKGPZ5rTAvKx9fh2oZzH9B6x/zTUOMCZPkkXuHKg3PncXZywDVdq1Nwgz
vrsKuCrpNsyHPDQ6G+D6
=qbjB
-----END PGP SIGNATURE-----
Merge tag 'mediatek-drm-next-5.8' of https://git.kernel.org/pub/scm/linux/kernel/git/chunkuang.hu/linux into drm-next
Mediatek DRM Next for Linux 5.8
This include dpi pin mode swap, config mipi_tx current and impedance,
and some fixup.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200521014612.17175-1-chunkuang.hu@kernel.org
pm_runtime_get_sync() increments the runtime PM usage counter even
the call returns an error code. Thus a pairing decrement is needed
on the error handling path to keep the counter balanced.
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
pm_runtime_get_sync() increments the runtime PM usage counter even
the call returns an error code. Thus a pairing decrement is needed
on the error handling path to keep the counter balanced.
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
pm_runtime_get_sync() increments the runtime PM usage counter even
the call returns an error code. Thus a pairing decrement is needed
on the error handling path to keep the counter balanced.
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
pm_runtime_get_sync() increments the runtime PM usage counter even
the call returns an error code. Thus a pairing decrement is needed
on the error handling path to keep the counter balanced.
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
When calling OpenCL clEnqueueSVMMigrateMem() on a region of memory that
is backed by pte_none() or zero pages, migrate_vma_setup() will fill the
source PFN array with an entry indicating the source page is zero.
Use this to optimize migration to device private memory by allocating
GPU memory and zero filling it instead of failing to migrate the page.
Signed-off-by: Ralph Campbell <rcampbell@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
In nouveau_dmem_init(), a number of struct nouveau_dmem_chunk are allocated
and put on the dmem->chunk_empty list. Then in nouveau_dmem_pages_alloc(),
a nouveau_dmem_chunk is removed from the list and GPU memory is allocated.
However, the nouveau_dmem_chunk is never removed from the chunk_empty
list nor placed on the chunk_free or chunk_full lists. This results
in only one chunk ever being actually used (2MB) and quickly leads to
migration to device private memory failures.
Fix this by having just one list of free device private pages and if no
pages are free, allocate a chunk of device private pages and GPU memory.
Signed-off-by: Ralph Campbell <rcampbell@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Currently, the nv50_mstc_mode_valid() function is happy to take any and
all modes, even the ones we can't actually support sometimes like
interlaced modes.
Luckily, the only difference between the mode validation that needs to
be performed for MST vs. SST is that eventually we'll need to check the
minimum PBN against the MSTB's full PBN capabilities (remember-we don't
care about the current bw state here). Otherwise, all of the other code
can be shared.
So, we move all of the common mode validation in
nouveau_connector_mode_valid() into a separate helper,
nv50_dp_mode_valid(), and use that from both nv50_mstc_mode_valid() and
nouveau_connector_mode_valid(). Note that we allow for returning the
calculated clock that nv50_dp_mode_valid() came up with, since we'll
eventually want to use that for PBN calculation in
nv50_mstc_mode_valid().
Signed-off-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
This just limits the BPC for MST connectors to a maximum of 8 from
nv50_mstc_get_modes(), instead of doing so during
nv50_msto_atomic_check(). This doesn't introduce any functional changes
yet (other then userspace now lying about the max bpc, but we can't
support that yet anyway so meh). But, we'll need this in a moment so
that we can share mode validation between SST and MST which will fix
some real world issues.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
We advertise being able to set interlaced modes, so let's actually make
sure to do that. Otherwise, we'll end up hanging the display engine due
to trying to set a mode with timings adjusted for interlacing without
telling the hardware it's actually an interlaced mode.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Right now, we make the mistake of allowing interlacing on all
connectors. Nvidia hardware does not always support interlacing with DP
though, so we need to make sure that we don't allow interlaced modes to
be set in such situations as otherwise we'll end up accidentally hanging
the display HW.
This fixes some hangs with Turing, which would be caused by attempting
to set an interlaced mode on hardware that doesn't support it. This
patch likely fixes other hardware hanging in the same way as well.
Note that we say we probe PIOR caps, but they don't actually have any
interlacing caps. So, the get_caps() function for PIORs just sets
interlacing support to true.
Changes since v1:
* Actually probe caps correctly this time, both on EVO and NVDisplay.
Changes since v2:
* Fix probing for < GF119
* Use vfunc table, in prep for adding more caps in the future.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
We'll need the core channel initialized and ready by the time that we
start creating modesetting objects, so that we can call the
NV507D_GET_CAPABILITIES method to make the hardware expose it's
modesetting capabilities for later probing.
So, when loading the driver prepare the core channel from within
nouveau_display_create(). Everywhere else, we initialize the core
channel during resume.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Since the commit 742db30c4e ("drm/nouveau: Add HD-audio component
notifier support"), the nouveau driver notifies and pokes the HD-audio
HPD and ELD via audio component, but this seems broken. The culprit
is the naive assumption that crtc->index corresponds to the HDA pin.
Actually this rather corresponds to the MST dev_id (alias "pipe" in
the audio component framework) while the actual port number is given
from the output ior id number.
This patch corrects the assignment of port and dev_id arguments in the
audio component ops to recover from the HDMI/DP audio regression.
Fixes: 742db30c4e ("drm/nouveau: Add HD-audio component notifier support")
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=207223
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
