A use-after-free in drm_gem_open_ioctl can happen if the
GEM object handle is closed between the idr lookup and
retrieving the size from said object since a local reference
is not being held at that point. Hold the local reference
while the object can still be accessed to fix this and
plug the potential security hole.
Signed-off-by: Steve Cohen <cohens@codeaurora.org>
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1595284250-31580-1-git-send-email-cohens@codeaurora.org
The function mipi_dbi_spi1_transfer() will transfer its payload as 9-bit
data, the 9th (MSB) bit being the data/command bit. In order to do that,
it unpacks the 8-bit values into 16-bit values, then sets the 9th bit if
the byte corresponds to data, clears it otherwise. The 7 MSB are
padding. The array of now 16-bit values is then passed to the SPI core
for transfer.
This function was broken since its introduction, as the length of the
SPI transfer was set to the payload size before its conversion, but the
payload doubled in size due to the 8-bit -> 16-bit conversion.
Fixes: 02dd95fe31 ("drm/tinydrm: Add MIPI DBI support")
Cc: <stable@vger.kernel.org> # 5.4+
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200703141341.1266263-1-paul@crapouillou.net
Recent kernels have been reported to panic using the bochs_drm
framebuffer under qemu-system-sparc64 which was bisected to
commit 7a0483ac4f ("drm/bochs: switch to generic drm fbdev emulation").
The backtrace indicates that the shadow framebuffer copy in
drm_fb_helper_dirty_blit_real() is trying to access the real
framebuffer using a virtual address rather than use an IO access
typically implemented using a physical (ASI_PHYS) access on SPARC.
The fix is to replace the memcpy with memcpy_toio() from io.h.
memcpy_toio() uses writeb() where the original fbdev code
used sbus_memcpy_toio(). The latter uses sbus_writeb().
The difference between writeb() and sbus_memcpy_toio() is
that writeb() writes bytes in little-endian, where sbus_writeb() writes
bytes in big-endian. As endian does not matter for byte writes they are
the same. So we can safely use memcpy_toio() here.
Note that this only fixes bochs, in general fbdev helpers still have
issues with mixing up system memory and __iomem space. Fixing that will
require a lot more work.
v3:
- Improved changelog (Daniel)
- Added FIXME to fbdev_use_iomem (Daniel)
v2:
- Added missing __iomem cast (kernel test robot)
- Made changelog readable and fix typos (Mark)
- Add flag to select iomem - and set it in the bochs driver
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reported-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reported-by: kernel test robot <lkp@intel.com>
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: sparclinux@vger.kernel.org
Link: https://patchwork.freedesktop.org/patch/msgid/20200709193016.291267-1-sam@ravnborg.org
Link: https://patchwork.freedesktop.org/patch/msgid/20200725191012.GA434957@ravnborg.org
Whenever a display update was sent, apart from updating
the memory base address, we called mcde_display_send_one_frame()
which also sent a command to the display requesting the TE IRQ
and enabling the FIFO.
When continuous updates are running this is wrong: we need
to only send this to start the flow to the display on
the very first update. This lead to the display pipeline
locking up and crashing.
Check if the flow is already running and in that case
do not call mcde_display_send_one_frame().
This fixes crashes on the Samsung GT-S7710 (Skomer).
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Stephan Gerhold <stephan@gerhold.net>
Cc: Stephan Gerhold <stephan@gerhold.net>
Cc: stable@vger.kernel.org
Link: https://patchwork.freedesktop.org/patch/msgid/20200718233323.3407670-1-linus.walleij@linaro.org
On boe_nv133fhm_n62 (and presumably on boe_nv133fhm_n61) a scope shows
a small spike on the HPD line right when you power the panel on. The
picture looks something like this:
+--------------------------------------
|
|
|
Power ---+
+---
|
++ |
+----+| |
HPD -----+ +---------------------------+
So right when power is applied there's a little bump in HPD and then
there's small spike right before it goes low. The total time of the
little bump plus the spike was measured on one panel as being 8 ms
long. The total time for the HPD to go high on the same panel was
51.2 ms, though the datasheet only promises it is < 200 ms.
When asked about this glitch, BOE indicated that it was expected and
persisted until the TCON has been initialized.
If this was a real hotpluggable DP panel then this wouldn't matter a
whole lot. We'd debounce the HPD signal for a really long time and so
the little blip wouldn't hurt. However, this is not a hotpluggable DP
panel and the the debouncing logic isn't needed and just shows down
the time needed to get the display working. This is why the code in
panel_simple_prepare() doesn't do debouncing and just waits for HPD to
go high once. Unfortunately if we get unlucky and happen to poll the
HPD line right at the spike we can try talking to the panel before
it's ready.
Let's handle this situation by putting in a 15 ms prepare delay and
decreasing the "hpd absent delay" by 15 ms. That means:
* If you don't have HPD hooked up at all you've still got the
hardcoded 200 ms delay.
* If you've got HPD hooked up you will always wait at least 15 ms
before checking HPD. The only case where this could be bad is if
the panel is sharing a voltage rail with something else in the
system and was already turned on long before the panel came up. In
such a case we'll be delaying 15 ms for no reason, but it's not a
huge delay and I don't see any other good solution to handle that
case.
Even though the delay was measured as 8 ms, 15 ms was chosen to give a
bit of margin.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200716132120.1.I01e738cd469b61fc9b28b3ef1c6541a4f48b11bf@changeid
After the drm_bridge_connector_init() helper function has been added,
the ADV driver has been changed accordingly. However, the 'type'
field of the bridge structure was left unset, which makes the helper
function always return -EINVAL.
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@nxp.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Tested-by: Vinod Koul <vkoul@kernel.org> # tested on DragonBoard 410c
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200720124228.12552-1-laurentiu.palcu@oss.nxp.com
When the extra HPD polling in sun4i_hdmi was removed, the result of
HPD was accidentally inverted.
Fix this by inverting the check.
Fixes: bda8eaa6de ("drm: sun4i: hdmi: Remove extra HPD polling")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Tested-by: Mans Rullgard <mans@mansr.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20200711011030.21997-1-wens@kernel.org
The following backtrace is seen when running aspeed G5 kernels.
WARNING: CPU: 0 PID: 1 at drivers/gpu/drm/drm_fb_helper.c:2233 drm_fbdev_generic_setup+0x138/0x198
aspeed_gfx 1e6e6000.display: Device has not been registered.
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.8.0-rc3 #1
Hardware name: Generic DT based system
Backtrace:
[<8010d6d0>] (dump_backtrace) from [<8010d9b8>] (show_stack+0x20/0x24)
r7:00000009 r6:60000153 r5:00000000 r4:8119fa94
[<8010d998>] (show_stack) from [<80b8cb98>] (dump_stack+0xcc/0xec)
[<80b8cacc>] (dump_stack) from [<80123ef0>] (__warn+0xd8/0xfc)
r7:00000009 r6:80e62ed0 r5:00000000 r4:974c3ccc
[<80123e18>] (__warn) from [<80123f98>] (warn_slowpath_fmt+0x84/0xc4)
r9:00000009 r8:806a0140 r7:000008b9 r6:80e62ed0 r5:80e631f8 r4:974c2000
[<80123f18>] (warn_slowpath_fmt) from [<806a0140>] (drm_fbdev_generic_setup+0x138/0x198)
r9:00000001 r8:9758fc10 r7:9758fc00 r6:00000000 r5:00000020 r4:9768a000
[<806a0008>] (drm_fbdev_generic_setup) from [<806d4558>] (aspeed_gfx_probe+0x204/0x32c)
r7:9758fc00 r6:00000000 r5:00000000 r4:9768a000
[<806d4354>] (aspeed_gfx_probe) from [<806dfca0>] (platform_drv_probe+0x58/0xa8)
Since commit 1aed9509b2 ("drm/fb-helper: Remove return value from
drm_fbdev_generic_setup()"), drm_fbdev_generic_setup() must be called
after drm_dev_register() to avoid the warning. Do that.
Fixes: 1aed9509b2 ("drm/fb-helper: Remove return value from drm_fbdev_generic_setup()")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20200701001002.74997-1-linux@roeck-us.net
The HiSilicon hibmc driver triggers a splat at boot time as below
[ 14.137806] ------------[ cut here ]------------
[ 14.142405] hibmc-drm 0000:0a:00.0: Device has not been registered.
[ 14.148661] WARNING: CPU: 0 PID: 496 at drivers/gpu/drm/drm_fb_helper.c:2233 drm_fbdev_generic_setup+0x15c/0x1b8
[ 14.158787] [...]
[ 14.278307] Call trace:
[ 14.280742] drm_fbdev_generic_setup+0x15c/0x1b8
[ 14.285337] hibmc_pci_probe+0x354/0x418
[ 14.289242] local_pci_probe+0x44/0x98
[ 14.292974] work_for_cpu_fn+0x20/0x30
[ 14.296708] process_one_work+0x1c4/0x4e0
[ 14.300698] worker_thread+0x2c8/0x528
[ 14.304431] kthread+0x138/0x140
[ 14.307646] ret_from_fork+0x10/0x18
[ 14.311205] ---[ end trace a2000ec2d838af4d ]---
This turned out to be due to the fbdev device hasn't been registered when
drm_fbdev_generic_setup() is invoked. Let's fix the splat by moving it down
after drm_dev_register() which will follow the "Display driver example"
documented by commit de99f0600a ("drm/drv: DOC: Add driver example
code").
Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Xinliang Liu <xinliang.liu@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200706144713.1123-1-yuzenghui@huawei.com
The burst length is configured in VIU_OSD1_FIFO_CTRL_STAT[31] and
VIU_OSD1_FIFO_CTRL_STAT[11:10]. The public S905D3 datasheet describes
this as:
- 0x0 = up to 24 per burst
- 0x1 = up to 32 per burst
- 0x2 = up to 48 per burst
- 0x3 = up to 64 per burst
- 0x4 = up to 96 per burst
- 0x5 = up to 128 per burst
The lower two bits map to VIU_OSD1_FIFO_CTRL_STAT[11:10] while the upper
bit maps to VIU_OSD1_FIFO_CTRL_STAT[31].
Replace meson_viu_osd_burst_length_reg() with pre-defined macros which
set these values. meson_viu_osd_burst_length_reg() always returned 0
(for the two used values: 32 and 64 at least) and thus incorrectly set
the burst size to 24.
Fixes: 147ae1cbaa ("drm: meson: viu: use proper macros instead of magic constants")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Tested-by: Christian Hewitt <christianshewitt@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200620155752.21065-1-martin.blumenstingl@googlemail.com
In the past we had a pile of hacks to orchestrate access between fbdev
emulation and native kms clients. We've tried to streamline this, by
always preferring the kms side above fbdev calls when a drm master
exists, because drm master controls access to the display resources.
Unfortunately this breaks existing userspace, specifically Xorg. When
exiting Xorg first restores the console to text mode using the KDSET
ioctl on the vt. This does nothing, because a drm master is still
around. Then it drops the drm master status, which again does nothing,
because logind is keeping additional drm fd open to be able to
orchestrate vt switches. In the past this is the point where fbdev was
restored, as part of the ->lastclose hook on the drm side.
Now to fix this regression we don't want to go back to letting fbdev
restore things whenever it feels like, or to the pile of hacks we've
had before. Instead try and go with a minimal exception to make the
KDSET case work again, and nothing else.
This means that if userspace does a KDSET call when switching between
graphical compositors, there will be some flickering with fbcon
showing up for a bit. But a) that's not a regression and b) userspace
can fix it by improving the vt switching dance - logind should have
all the information it needs.
While pondering all this I'm also wondering wheter we should have a
SWITCH_MASTER ioctl to allow race-free master status handover. But
that's for another day.
v2: Somehow forgot to cc all the fbdev people.
v3: Fix typo Alex spotted.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=208179
Cc: shlomo@fastmail.com
Reported-and-Tested-by: shlomo@fastmail.com
Cc: Michel Dänzer <michel@daenzer.net>
Fixes: 64914da24e ("drm/fbdev-helper: don't force restores")
Cc: Noralf Trønnes <noralf@tronnes.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v5.7+
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Nathan Chancellor <natechancellor@gmail.com>
Cc: Qiujun Huang <hqjagain@gmail.com>
Cc: Peter Rosin <peda@axentia.se>
Cc: linux-fbdev@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200624092910.3280448-1-daniel.vetter@ffwll.ch
The main DRM device is actually a virtual device so it doesn't have the
iommus property, which is instead on the DMA masters, in this case the
mixers.
Add a call to of_dma_configure with the mixers DT node but on the DRM
virtual device to configure it in the same way than the mixers.
Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/9a4daf438dd3f2fe07afb23688bfb793a0613d7d.1589378833.git-series.maxime@cerno.tech
(cherry picked from commit b718102dbd)
[Maxime: Applied to -fixes since it missed the merge window and display is
broken without it]
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
The Acer S1003 has proper DMI strings for sys-vendor and product-name,
so we do not need to match by BIOS-date.
This means that the Acer S1003 can use the generic lcd800x1280_rightside_up
drm_dmi_panel_orientation_data struct which is also used by other quirks.
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200531093025.28050-2-hdegoede@redhat.com
Like the Asus T100HA the Asus T101HA also uses a panel which has been
mounted 90 degrees rotated, albeit in the opposite direction.
Add a quirk for this.
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200531093025.28050-1-hdegoede@redhat.com
The LogicPD Type28 display used by several Logic PD products has not
worked since v5.6.
The connector type for the LogicPD Type 28 display is missing and
drm_panel_bridge_add() requires connector type to be set.
Signed-off-by: Adam Ford <aford173@gmail.com>
Fixes: 0d35408afb ("drm/panel: simple: Add Logic PD Type 28 display support")
Cc: Adam Ford <aford173@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v5.6+
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200615131934.12440-1-aford173@gmail.com
Unable to handle kernel NULL pointer dereference at virtual address 00000918
pgd = (ptrval)
[00000918] *pgd=00000000
Internal error: Oops: 5 [#1] SMP ARM
Modules linked in:
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.7.0-15001-gfa384b50b96b-dirty #514
Hardware name: ST-Ericsson Ux5x0 platform (Device Tree Support)
PC is at mcde_display_enable+0x78/0x7c0
LR is at mcde_display_enable+0x78/0x7c0
Fix this by using to_mcde() as in other functions.
Fixes: fd7ee85cfe ("drm/mcde: Don't use drm_device->dev_private")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200613223027.4189309-2-linus.walleij@linaro.org
The following bug appeared in the MCDE driver/display
initialization during the recent merge window.
First the place we call drm_fbdev_generic_setup() in the
wrong place: this needs to be called AFTER calling
drm_dev_register() else we get this splat:
------------[ cut here ]------------
WARNING: CPU: 0 PID: 1 at ../drivers/gpu/drm/drm_fb_helper.c:2198 drm_fbdev_generic_setup+0x164/0x1a8
mcde a0350000.mcde: Device has not been registered.
Modules linked in:
Hardware name: ST-Ericsson Ux5x0 platform (Device Tree Support)
[<c010e704>] (unwind_backtrace) from [<c010a86c>] (show_stack+0x10/0x14)
[<c010a86c>] (show_stack) from [<c0414f38>] (dump_stack+0x9c/0xb0)
[<c0414f38>] (dump_stack) from [<c0121c8c>] (__warn+0xb8/0xd0)
[<c0121c8c>] (__warn) from [<c0121d18>] (warn_slowpath_fmt+0x74/0xb8)
[<c0121d18>] (warn_slowpath_fmt) from [<c04b154c>] (drm_fbdev_generic_setup+0x164/0x1a8)
[<c04b154c>] (drm_fbdev_generic_setup) from [<c04ed278>] (mcde_drm_bind+0xc4/0x160)
[<c04ed278>] (mcde_drm_bind) from [<c04f06b8>] (try_to_bring_up_master+0x15c/0x1a4)
(...)
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200613223027.4189309-1-linus.walleij@linaro.org
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAl7mfkAeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGTG4H/1iH1Psd32XKoO63
XuOashbqnsYLCKckbFg0RgHIDTp6d0wypF5m3dSYqpifWUaEf8SkTGnm0geV9zc1
axDUdaqr+OvhDPZiSLt4cFu2M5yvGb4/WR76qjKzxWd+LNUGOVpx1GvFXl/5wPdp
/lYR3mqZqNffwK2QuZ1m8X1gy5fzr4esoyZDK71dP88uBlFmbQLJsYiCRfQ7GDsm
r574gz7SKjPoPFPj7qJ3CLsnOruZiL36uxmYZWC2hnkNaFzLfMFiE7OqrEZK/YV6
Gc8ZZGtN+Otr+UbojagjTjRM6uy3qWBYEMX4GcRt9M2jS8LGKsYcxV75h0U5qlyz
m8QAA0o=
=jy/I
-----END PGP SIGNATURE-----
Merge v5.8-rc1 into drm-misc-fixes
Beginning a new release cycles for what will become v5.8. Updating
drm-misc-fixes accordingly.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
ttm_bo_add_move_fence() invokes dma_fence_get(), which returns a
reference of the specified dma_fence object to "fence" with increased
refcnt.
When ttm_bo_add_move_fence() returns, local variable "fence" becomes
invalid, so the refcount should be decreased to keep refcount balanced.
The reference counting issue happens in one exception handling path of
ttm_bo_add_move_fence(). When no_wait_gpu flag is equals to true, the
function forgets to decrease the refcnt increased by dma_fence_get(),
causing a refcnt leak.
Fix this issue by calling dma_fence_put() when no_wait_gpu flag is
equals to true.
Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn>
Signed-off-by: Xin Tan <tanxin.ctf@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/370221/
Signed-off-by: Christian König <christian.koenig@amd.com>
ttm_bo_vm_fault_reserved() invokes dma_fence_get(), which returns a
reference of the specified dma_fence object to "moving" with increased
refcnt.
When ttm_bo_vm_fault_reserved() returns, local variable "moving" becomes
invalid, so the refcount should be decreased to keep refcount balanced.
The reference counting issue happens in several exception handling paths
of ttm_bo_vm_fault_reserved(). When those error scenarios occur such as
"err" equals to -EBUSY, the function forgets to decrease the refcnt
increased by dma_fence_get(), causing a refcnt leak.
Fix this issue by calling dma_fence_put() when no_wait_gpu flag is
equals to true.
Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn>
Signed-off-by: Xin Tan <tanxin.ctf@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/370219/
Signed-off-by: Christian König <christian.koenig@amd.com>
- fix build rules in binderfs sample
- fix build errors when Kbuild recurses to the top Makefile
- covert '---help---' in Kconfig to 'help'
-----BEGIN PGP SIGNATURE-----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=1NIT
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull more Kbuild updates from Masahiro Yamada:
- fix build rules in binderfs sample
- fix build errors when Kbuild recurses to the top Makefile
- covert '---help---' in Kconfig to 'help'
* tag 'kbuild-v5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
treewide: replace '---help---' in Kconfig files with 'help'
kbuild: fix broken builds because of GZIP,BZIP2,LZOP variables
samples: binderfs: really compile this sample and fix build issues
Since commit 84af7a6194 ("checkpatch: kconfig: prefer 'help' over
'---help---'"), the number of '---help---' has been gradually
decreasing, but there are still more than 2400 instances.
This commit finishes the conversion. While I touched the lines,
I also fixed the indentation.
There are a variety of indentation styles found.
a) 4 spaces + '---help---'
b) 7 spaces + '---help---'
c) 8 spaces + '---help---'
d) 1 space + 1 tab + '---help---'
e) 1 tab + '---help---' (correct indentation)
f) 1 tab + 1 space + '---help---'
g) 1 tab + 2 spaces + '---help---'
In order to convert all of them to 1 tab + 'help', I ran the
following commend:
$ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/'
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Merge some more updates from Andrew Morton:
- various hotfixes and minor things
- hch's use_mm/unuse_mm clearnups
Subsystems affected by this patch series: mm/hugetlb, scripts, kcov,
lib, nilfs, checkpatch, lib, mm/debug, ocfs2, lib, misc.
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
kernel: set USER_DS in kthread_use_mm
kernel: better document the use_mm/unuse_mm API contract
kernel: move use_mm/unuse_mm to kthread.c
kernel: move use_mm/unuse_mm to kthread.c
stacktrace: cleanup inconsistent variable type
lib: test get_count_order/long in test_bitops.c
mm: add comments on pglist_data zones
ocfs2: fix spelling mistake and grammar
mm/debug_vm_pgtable: fix kernel crash by checking for THP support
lib: fix bitmap_parse() on 64-bit big endian archs
checkpatch: correct check for kernel parameters doc
nilfs2: fix null pointer dereference at nilfs_segctor_do_construct()
lib/lz4/lz4_decompress.c: document deliberate use of `&'
kcov: check kcov_softirq in kcov_remote_stop()
scripts/spelling: add a few more typos
khugepaged: selftests: fix timeout condition in wait_for_scan()
core:
- fix race in connectors sending hotplug
i915:
- Avoid use after free in cmdparser
- Avoid NULL dereference when probing all display encoders
- Fixup to module parameter type
sun4i:
- clock divider fix
ast:
- 24/32 bpp mode setting fix
-----BEGIN PGP SIGNATURE-----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=IBzW
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2020-06-11-1' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"One sun4i fix and a connector hotplug race The ast fix is for a
regression in 5.6, and one of the i915 ones fixes an oops reported by
dhowells.
core:
- fix race in connectors sending hotplug
i915:
- Avoid use after free in cmdparser
- Avoid NULL dereference when probing all display encoders
- Fixup to module parameter type
sun4i:
- clock divider fix
ast:
- 24/32 bpp mode setting fix"
* tag 'drm-next-2020-06-11-1' of git://anongit.freedesktop.org/drm/drm:
drm/ast: fix missing break in switch statement for format->cpp[0] case 4
drm/sun4i: hdmi ddc clk: Fix size of m divider
drm/i915/display: Only query DP state of a DDI encoder
drm/i915/params: fix i915.reset module param type
drm/i915/gem: Mark the buffer pool as active for the cmdparser
drm/connector: notify userspace on hotplug after register complete
sysfs. In drivers, sun4i now uses 4 bits to store the clock's m divider;
ast sets up 24/32-bit color mode correctly.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEchf7rIzpz2NEoWjlaA3BHVMLeiMFAl7h4c0ACgkQaA3BHVML
eiP6Pgf9GN4XlZvsrH7lV+125XwlX4gMa0/MQguNldvr6HsMJfV0rFL5cNbLrjbx
rLBD2INasf4iXeaUf4LIJPfPbjhHJlAqi3VePb9SH3+EaU23wfmY68rVcKU15z3k
/0Csu06h70U10f8US+2qGn+82ZhT4au6s6+6bOfE7C4QIbi5jkmlB5ZiTQn2H/J3
FUCYUxTEASjkYTXwYCaPdTVqITNzekd6Oun+C612oHcVQvFrPbhsCTz85v0q7RZJ
Rd2PM6WKHLQEw55GEsGaMmzEKLm+xKlT5TCkZRVvCB6X2CLIShhuWun/qA+FfKXK
+hDToj2B8BHf9b8LvPF+1tmD3BNZ2w==
=vo9M
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-fixes-2020-06-11' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
In core, DRM connectors now notify userspace of hotplug events via
sysfs. In drivers, sun4i now uses 4 bits to store the clock's m divider;
ast sets up 24/32-bit color mode correctly.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20200611075007.GA15098@linux-uq9g
Currently the switch statement for format->cpp[0] value 4 assigns
color_index which is never read again and then falls through to the
default case and returns. This looks like a missing break statement
bug. Fix this by adding a break statement.
Addresses-Coverity: ("Unused value")
Fixes: 259d14a76a ("drm/ast: Split ast_set_vbios_mode_info()")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20200610115804.1132338-1-colin.king@canonical.com
Switch the function documentation to kerneldoc comments, and add
WARN_ON_ONCE asserts that the calling thread is a kernel thread and does
not have ->mm set (or has ->mm set in the case of unuse_mm).
Also give the functions a kthread_ prefix to better document the use case.
[hch@lst.de: fix a comment typo, cover the newly merged use_mm/unuse_mm caller in vfio]
Link: http://lkml.kernel.org/r/20200416053158.586887-3-hch@lst.de
[sfr@canb.auug.org.au: powerpc/vas: fix up for {un}use_mm() rename]
Link: http://lkml.kernel.org/r/20200422163935.5aa93ba5@canb.auug.org.au
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> [usb]
Acked-by: Haren Myneni <haren@linux.ibm.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Jason Wang <jasowang@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Cc: Zhi Wang <zhi.a.wang@intel.com>
Link: http://lkml.kernel.org/r/20200404094101.672954-6-hch@lst.de
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "improve use_mm / unuse_mm", v2.
This series improves the use_mm / unuse_mm interface by better documenting
the assumptions, and my taking the set_fs manipulations spread over the
callers into the core API.
This patch (of 3):
Use the proper API instead.
Link: http://lkml.kernel.org/r/20200404094101.672954-1-hch@lst.de
These helpers are only for use with kernel threads, and I will tie them
more into the kthread infrastructure going forward. Also move the
prototypes to kthread.h - mmu_context.h was a little weird to start with
as it otherwise contains very low-level MM bits.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Jason Wang <jasowang@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Cc: Zhi Wang <zhi.a.wang@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: http://lkml.kernel.org/r/20200404094101.672954-1-hch@lst.de
Link: http://lkml.kernel.org/r/20200416053158.586887-1-hch@lst.de
Link: http://lkml.kernel.org/r/20200404094101.672954-5-hch@lst.de
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull i915 uaccess updates from Al Viro:
"Low-hanging fruit in i915; there are several trickier followups, but
that'll wait for the next cycle"
* 'uaccess.i915' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
i915:get_engines(): get rid of pointless access_ok()
i915: alloc_oa_regs(): get rid of pointless access_ok()
i915 compat ioctl(): just use drm_ioctl_kernel()
i915: switch copy_perf_config_registers_or_number() to unsafe_put_user()
i915: switch query_{topology,engine}_info() to copy_to_user()
Rename the mmap_sem field to mmap_lock. Any new uses of this lock should
now go through the new mmap locking api. The mmap_lock is still
implemented as a rwsem, though this could change in the future.
[akpm@linux-foundation.org: fix it for mm-gup-might_lock_readmmap_sem-in-get_user_pages_fast.patch]
Signed-off-by: Michel Lespinasse <walken@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Davidlohr Bueso <dbueso@suse.de>
Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Laurent Dufour <ldufour@linux.ibm.com>
Cc: Liam Howlett <Liam.Howlett@oracle.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ying Han <yinghan@google.com>
Link: http://lkml.kernel.org/r/20200520052908.204642-11-walken@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The replacement of <asm/pgrable.h> with <linux/pgtable.h> made the include
of the latter in the middle of asm includes. Fix this up with the aid of
the below script and manual adjustments here and there.
import sys
import re
if len(sys.argv) is not 3:
print "USAGE: %s <file> <header>" % (sys.argv[0])
sys.exit(1)
hdr_to_move="#include <linux/%s>" % sys.argv[2]
moved = False
in_hdrs = False
with open(sys.argv[1], "r") as f:
lines = f.readlines()
for _line in lines:
line = _line.rstrip('
')
if line == hdr_to_move:
continue
if line.startswith("#include <linux/"):
in_hdrs = True
elif not moved and in_hdrs:
moved = True
print hdr_to_move
print line
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Cain <bcain@codeaurora.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Greg Ungerer <gerg@linux-m68k.org>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Guo Ren <guoren@kernel.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Ley Foon Tan <ley.foon.tan@intel.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Nick Hu <nickhu@andestech.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vincent Chen <deanbo422@gmail.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: http://lkml.kernel.org/r/20200514170327.31389-4-rppt@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The include/linux/pgtable.h is going to be the home of generic page table
manipulation functions.
Start with moving asm-generic/pgtable.h to include/linux/pgtable.h and
make the latter include asm/pgtable.h.
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Cain <bcain@codeaurora.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Greg Ungerer <gerg@linux-m68k.org>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Guo Ren <guoren@kernel.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Ley Foon Tan <ley.foon.tan@intel.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Nick Hu <nickhu@andestech.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vincent Chen <deanbo422@gmail.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: http://lkml.kernel.org/r/20200514170327.31389-3-rppt@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "mm: consolidate definitions of page table accessors", v2.
The low level page table accessors (pXY_index(), pXY_offset()) are
duplicated across all architectures and sometimes more than once. For
instance, we have 31 definition of pgd_offset() for 25 supported
architectures.
Most of these definitions are actually identical and typically it boils
down to, e.g.
static inline unsigned long pmd_index(unsigned long address)
{
return (address >> PMD_SHIFT) & (PTRS_PER_PMD - 1);
}
static inline pmd_t *pmd_offset(pud_t *pud, unsigned long address)
{
return (pmd_t *)pud_page_vaddr(*pud) + pmd_index(address);
}
These definitions can be shared among 90% of the arches provided
XYZ_SHIFT, PTRS_PER_XYZ and xyz_page_vaddr() are defined.
For architectures that really need a custom version there is always
possibility to override the generic version with the usual ifdefs magic.
These patches introduce include/linux/pgtable.h that replaces
include/asm-generic/pgtable.h and add the definitions of the page table
accessors to the new header.
This patch (of 12):
The linux/mm.h header includes <asm/pgtable.h> to allow inlining of the
functions involving page table manipulations, e.g. pte_alloc() and
pmd_alloc(). So, there is no point to explicitly include <asm/pgtable.h>
in the files that include <linux/mm.h>.
The include statements in such cases are remove with a simple loop:
for f in $(git grep -l "include <linux/mm.h>") ; do
sed -i -e '/include <asm\/pgtable.h>/ d' $f
done
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Cain <bcain@codeaurora.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Greg Ungerer <gerg@linux-m68k.org>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Guo Ren <guoren@kernel.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Ley Foon Tan <ley.foon.tan@intel.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Nick Hu <nickhu@andestech.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vincent Chen <deanbo422@gmail.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: http://lkml.kernel.org/r/20200514170327.31389-1-rppt@kernel.org
Link: http://lkml.kernel.org/r/20200514170327.31389-2-rppt@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Avoid a NULL dereference for a mismatched encoder type, hit when
probing state for all encoders.
This is a band aid to prevent the OOPS as the right fix is "probably to
swap the psr vs infoframes.enable checks, or outright disappear from
this function" (Ville).
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/1892
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200525124912.16019-1-chris@chris-wilson.co.uk
(cherry picked from commit 22da5d846d)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
* new gpu support: a405, a640, a650
* dpu: color processing support
* mdp5: support for msm8x36 (the thing with a405)
* some prep work for per-context pagetables (ie the part that
does not depend on in-flight iommu patches)
* last but not least, UABI update for submit ioctl to support
syncobj (from Bas)
-----BEGIN PGP SIGNATURE-----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=hIK6
-----END PGP SIGNATURE-----
Merge tag 'drm-next-msm-5.8-2020-06-08' of git://anongit.freedesktop.org/drm/drm
Pull drm msm updates from Dave Airlie:
"This tree has been in next for a couple of weeks, but Rob missed an
arm32 build issue, so I was awaiting the tree with a patch reverted.
- new gpu support: a405, a640, a650
- dpu: color processing support
- mdp5: support for msm8x36 (the thing with a405)
- some prep work for per-context pagetables (ie the part that does
not depend on in-flight iommu patches)
- last but not least, UABI update for submit ioctl to support syncobj
(from Bas)"
* tag 'drm-next-msm-5.8-2020-06-08' of git://anongit.freedesktop.org/drm/drm: (30 commits)
Revert "drm/msm/dpu: add support for clk and bw scaling for display"
drm/msm/a6xx: skip HFI set freq if GMU is powered down
drm/msm: Update the MMU helper function APIs
drm/msm: Refactor address space initialization
drm/msm: Attach the IOMMU device during initialization
drm/msm/dpu: dpu_setup_dspp_pcc() can be static
drm/msm/a6xx: a6xx_hfi_send_start() can be static
drm/msm/a4xx: add a405_registers for a405 device
drm/msm/a4xx: add adreno a405 support
drm/msm/a6xx: update a6xx_hw_init for A640 and A650
drm/msm/a6xx: enable GMU log
drm/msm/a6xx: update pdc/rscc GMU registers for A640/A650
drm/msm/a6xx: A640/A650 GMU firmware path
drm/msm/a6xx: HFI v2 for A640 and A650
drm/msm/a6xx: add A640/A650 to gpulist
drm/msm/a6xx: use msm_gem for GMU memory objects
drm/msm: add internal MSM_BO_MAP_PRIV flag
drm/msm: add msm_gem_get_and_pin_iova_range
drm/msm: Check for powered down HW in the devfreq callbacks
drm/msm/dpu: update bandwidth threshold check
...
i915:
- gvt: Fix one clang warning on debug only function
Use ARRAY_SIZE for coccicheck warn
- Use after free fix for display global state.
- Whitelisting context-local timestamp on Gen9
and two scheduler fixes with deps (Cc: stable)
- Removal of write flag from sysfs files where
ineffective
nouveau:
- HDMI/DP audio HDA fixes
- display hang fix for Volta/Turing
- GK20A regression fix.
amdgpu:
- Prevent hwmon accesses while GPU is in reset
- CTF interrupt fix
- Backlight fix for renoir
- Fix for display sync groups
- Display bandwidth validation workaround
-----BEGIN PGP SIGNATURE-----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=wXjv
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2020-06-08' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"These are the fixes from last week for the stuff merged in the merge
window. It got a bunch of nouveau fixes for HDA audio on some new
GPUs, some i915 and some amdpgu fixes.
i915:
- gvt: Fix one clang warning on debug only function
- Use ARRAY_SIZE for coccicheck warning
- Use after free fix for display global state.
- Whitelisting context-local timestamp on Gen9 and two scheduler
fixes with deps (Cc: stable)
- Removal of write flag from sysfs files where ineffective
nouveau:
- HDMI/DP audio HDA fixes
- display hang fix for Volta/Turing
- GK20A regression fix.
amdgpu:
- Prevent hwmon accesses while GPU is in reset
- CTF interrupt fix
- Backlight fix for renoir
- Fix for display sync groups
- Display bandwidth validation workaround"
* tag 'drm-next-2020-06-08' of git://anongit.freedesktop.org/drm/drm: (28 commits)
drm/nouveau/kms/nv50-: clear SW state of disabled windows harder
drm/nouveau: gr/gk20a: Use firmware version 0
drm/nouveau/disp/gm200-: detect and potentially disable HDA support on some SORs
drm/nouveau/disp/gp100: split SOR implementation from gm200
drm/nouveau/disp: modify OR allocation policy to account for HDA requirements
drm/nouveau/disp: split part of OR allocation logic into a function
drm/nouveau/disp: provide hint to OR allocation about HDA requirements
drm/amd/display: Revalidate bandwidth before commiting DC updates
drm/amdgpu/display: use blanked rather than plane state for sync groups
drm/i915/params: fix i915.fake_lmem_start module param sysfs permissions
drm/i915/params: don't expose inject_probe_failure in debugfs
drm/i915: Whitelist context-local timestamp in the gen9 cmdparser
drm/i915: Fix global state use-after-frees with a refcount
drm/i915: Check for awaits on still currently executing requests
drm/i915/gt: Do not schedule normal requests immediately along virtual
drm/i915: Reorder await_execution before await_request
drm/nouveau/kms/gt215-: fix race with audio driver runpm
drm/nouveau/disp/gm200-: fix NV_PDISP_SOR_HDMI2_CTRL(n) selection
Revert "drm/amd/display: disable dcn20 abm feature for bring up"
drm/amd/powerplay: ack the SMUToHost interrupt on receive V2
...
The reset member in i915_params was previously changed to unsigned, but
this failed to change the actual module parameter.
Fixes: aae970d845 ("drm/i915: Mark i915.reset as unsigned")
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200602151126.25626-1-jani.nikula@intel.com
(cherry picked from commit 34becfdb94)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
If the execbuf is interrupted after building the cmdparser pipeline, and
before we commit to submitting the request to HW, we would attempt to
clean up the cmdparser early. While we held active references to the vma
being parsed and constructed, we did not hold an active reference for
the buffer pool itself. The result was that an interrupted execbuf could
still have run the cmdparser pipeline, but since the buffer pool was
idle, its target vma could have been recycled.
Note this problem only occurs if the cmdparser is running async due to
pipelined waits on busy fences, and the execbuf is interrupted.
Fixes: 686c7c35ab ("drm/i915/gem: Asynchronous cmdparser")
Fixes: 16e8745967 ("drm/i915/gt: Move the batch buffer pool from the engine to the gt")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200604103751.18816-1-chris@chris-wilson.co.uk
(cherry picked from commit 57a78ca4ec)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
* new gpu support: a405, a640, a650
* dpu: color processing support
* mdp5: support for msm8x36 (the thing with a405)
* some prep work for per-context pagetables (ie the part that
does not depend on in-flight iommu patches)
* last but not least, UABI update for submit ioctl to support
syncobj (from Bas)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ <CAF6AEGvLMubYPeKZ0rvOp45=+h4HZz-K9XNf0CXYcvPDVbnqLA@mail.gmail.com
- Includes gvt-next-fixes-2020-05-28
- Use after free fix for display global state.
- Whitelisting context-local timestamp on Gen9
and two scheduler fixes with deps (Cc: stable)
- Removal of write flag from sysfs files where
ineffective
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200604150454.GA59322@jlahtine-desk.ger.corp.intel.com