There are some requirements about the GIC-400 memory layout and its
mapping if using 64k aligned base addresses like on r8a7795.
See e.g.
http://xenbits.xen.org/gitweb/?p=xen.git;a=commit;h=21550029f709072aacf3b9
Map the whole memory range instead of only 0x2000. This will fix
the issue that some hypervisors, e.g. Xen, fail to handle the
interrupts correctly.
Signed-off-by: Pooya Keshavarzi <Pooya.Keshavarzi@de.bosch.com>
Signed-off-by: Dirk Behme <dirk.behme@de.bosch.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
On the Salvator-X development board, the RTS and CTS pins of debug
serial-1 port SCIF1 are wired to the CP2102 Serial-USB bridge. Reflect
this in the DTS by adding the "uart-has-rtscts" property to the scif1
device node.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
This is a collection of a few late fixes and other misc. stuff that
had dependencies on things being merged from other trees.
The Renesas R-Car power domain handling, and the Nvidia Tegra USB
support both hand notable changes that required changing the DT binding
in a way that only provides compatibility with old DT blobs on new
kernels but not vice versa. As a consequence, the DT changes
are based on top of the driver changes and are now in this branch.
For NXP i.MX and Samsung Exynos, the changes in here depend on
other changes that got merged through the clk maintainer tree.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIVAwUAV0Sse2CrR//JCVInAQJoOg//VQwAUxayKGfYVzhJjhHdYbVA9kWYczHb
wizFbF51XPylQzfGgHxEZJgdO3y2Ks54J7xaCK7oSUPEBT0rHsLQunHhq0aVQpew
1c06vEysYMkRclG7C0zN7i4gwdig+L4r6kUguTvb+nyJS3RISg0LaSoANVU65dQ5
+g4DLRrX1QlZPBXR8Fc/S1gTFXU+dO1S0oJFnK9ZZTgmsGg4GA0qC60hdsv+WeSv
uzS4FJoxSy9MzoAFqmnWIa4jBV9I1Rg5vi7dfoBbTW1XOAMpq+GVLLU+Lvso0Jqw
xWjBSmPl6l/cZ7BhpzWq8knKOsEezh5LLrVRXViVCGfTIFdlObxyHzeKcJp25V1p
mL98MBXobn9Rly9hJxyzpeNWITZ6qJYR+IQy3Lsuk5KrdZG2f4uTErtoqmYRI3Pn
vuXoi13NUeoCrHZJZ+fNUGwx5a5/hgUQXP5u+98uucQSqIVxe0cGnQVnFm84X81r
Sj/dXxFlFBZfqfE8rf1cFd+YEbKtpF13vEURAQWrnEzBmJSTu7Cp8qdA5hX5CeK4
DW9bsu5hkWwnzoC2Ox/ZQVms4aI3q8s2xuu28GEJJdCE2IUiSnag/5vhGBzd4dTm
9R69RhE9y4EOhw+0z1O0LfoKoo6YyUQa+OUNVIwEfFjcCdZiMQIdZWi2PLv4jeAR
jBBbpcWtHLo=
=I0Be
-----END PGP SIGNATURE-----
Merge tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC late DT updates from Arnd Bergmann:
"This is a collection of a few late fixes and other misc stuff that had
dependencies on things being merged from other trees.
The Renesas R-Car power domain handling, and the Nvidia Tegra USB
support both hand notable changes that required changing the DT
binding in a way that only provides compatibility with old DT blobs on
new kernels but not vice versa. As a consequence, the DT changes are
based on top of the driver changes and are now in this branch.
For NXP i.MX and Samsung Exynos, the changes in here depend on other
changes that got merged through the clk maintainer tree"
* tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (35 commits)
ARM: dts: exynos: Add support of Bus frequency using VDD_INT for exynos5422-odroidxu3
ARM: dts: exynos: Add bus nodes using VDD_INT for Exynos542x SoC
ARM: dts: exynos: Add NoC Probe dt node for Exynos542x SoC
ARM: dts: exynos: Add support of bus frequency for exynos4412-trats/odroidu3
ARM: dts: exynos: Expand the voltage range of buck1/3 regulator for exynos4412-odroidu3
ARM: dts: exynos: Add support of bus frequency using VDD_INT for exynos3250-rinato
ARM: dts: exynos: Add exynos4412-ppmu-common dtsi to delete duplicate PPMU nodes
ARM: dts: exynos: Add bus nodes using VDD_MIF for Exynos4210
ARM: dts: exynos: Add bus nodes using VDD_INT for Exynos4x12
ARM: dts: exynos: Add bus nodes using VDD_MIF for Exynos4x12
ARM: dts: exynos: Add bus nodes using VDD_INT for Exynos3250
ARM: dts: exynos: Add DMC bus frequency for exynos3250-rinato/monk
ARM: dts: exynos: Add DMC bus node for Exynos3250
ARM: tegra: Enable XUSB on Nyan
ARM: tegra: Enable XUSB on Jetson TK1
ARM: tegra: Enable XUSB on Venice2
ARM: tegra: Add Tegra124 XUSB controller
ARM: tegra: Move Tegra124 to the new XUSB pad controller binding
ARM: dts: r8a7794: Use SYSC "always-on" PM Domain
ARM: dts: r8a7793: Use SYSC "always-on" PM Domain
...
We continue ramping up platform support for 64-bit ARM machines,
with 111 individual non-merge changesets touching 21 platforms.
The LG1312 platform is completely new and is the first ARM
platform by LG that we support in the mainline kernel. Two other
SoCs got added that are updated versions of existing SoC
families, so the port mainly consists of new dts files:
- The Hisilicon Hip06/D03 is the latest server platform
from Huawei/Hisilicon, and follows the Hip05/D02 platform.
- Rockchip RK3399 follows the 32-bit RK3288 that is popular
in low-end Chromebooks and the 64-bit RK3368 that is mainly
found in chinese Android TV boxes.
The 96Boards HiKey based on the Hisilicon Hi6220 (Kirin 620)
gets a long-awaited overhaul with a lot of devices enabled in
the DT, so it should be much more usable with a mainline kernel
now. See also
https://plus.google.com/111524780435806926688/posts/PeGb2VsNhJd
A lot of work went into enabling new device drivers on existing
machines, but we also have a couple of new commercially
available machines:
- Google Pixel C laptop based on Tegra210
- Hardkernel Odroid C2 Based on Amlogic Meson GXBB (S905)
- Geekbuying GeekBox based on Rockchip RK3368
And finally, a couple of reference or development platforms
that are not end-user platforms but are used for trying out
the respective SoC platforms:
- Amlogic Meson GXBB P200 and P201 development systems
- NXP Layerscape 1043A QDS development board
- Hisilicon Hip06 D03 server board, as mentioned above
- LG1312 Reference Design
- RK3399 Evaluation Board
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=locI
-----END PGP SIGNATURE-----
Merge tag 'armsoc-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM 64-bit DT updates from Arnd Bergmann:
"We continue ramping up platform support for 64-bit ARM machines, with
111 individual non-merge changesets touching 21 platforms.
The LG1312 platform is completely new and is the first ARM platform by
LG that we support in the mainline kernel. Two other SoCs got added
that are updated versions of existing SoC families, so the port mainly
consists of new dts files:
- The Hisilicon Hip06/D03 is the latest server platform from
Huawei/Hisilicon, and follows the Hip05/D02 platform.
- Rockchip RK3399 follows the 32-bit RK3288 that is popular in
low-end Chromebooks and the 64-bit RK3368 that is mainly found in
chinese Android TV boxes.
The 96Boards HiKey based on the Hisilicon Hi6220 (Kirin 620) gets a
long-awaited overhaul with a lot of devices enabled in the DT, so it
should be much more usable with a mainline kernel now. See also
https://plus.google.com/111524780435806926688/posts/PeGb2VsNhJd
A lot of work went into enabling new device drivers on existing
machines, but we also have a couple of new commercially available
machines:
- Google Pixel C laptop based on Tegra210
- Hardkernel Odroid C2 Based on Amlogic Meson GXBB (S905)
- Geekbuying GeekBox based on Rockchip RK3368
And finally, a couple of reference or development platforms that are
not end-user platforms but are used for trying out the respective SoC
platforms:
- Amlogic Meson GXBB P200 and P201 development systems
- NXP Layerscape 1043A QDS development board
- Hisilicon Hip06 D03 server board, as mentioned above
- LG1312 Reference Design
- RK3399 Evaluation Board"
* tag 'armsoc-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (104 commits)
arm64: dts: marvell: add XOR node for Armada 3700 SoC
dt-bindings: document rockchip rk3399-evb board
arm64: dts: rockchip: add dts file for RK3399 evaluation board
arm64: dts: rockchip: add core dtsi file for RK3399 SoCs
dt-bindings: rockchip-dw-mshc: add description for rk3399
arm64: dts: marvell: Use a SoC-specific compatible for xHCI on Armada37xx
arm64: dts: marvell: Rename armada-37xx USB node
arm64: dts: marvell: Clean up armada-3720-db
Documentation: arm64: Add Hisilicon Hip06 D03 dts binding
arm64: dts: Add initial dts for Hisilicon Hip06 D03 board
arm64: dts: hip05: Add nor flash support
arm64: dts: hip05: fix its node without msi-cells
arm64: dts: r8a7795: Don't disable referenced optional clocks
arm64: dts: salvator-x: populate EXTALR
arm64: dts: r8a7795: enable PCIe on Salvator-X
arm64: dts: r8a7795: Add PCIe nodes
arm64: tegra: Add IOMMU node to GM20B on Tegra210
arm64: tegra: Add reference clock to GM20B on Tegra210
dt-bindings: Add documentation for GM20B GPU
dt-bindings: gk20a: Document iommus property
...
These are all the updates to device tree files for 32-bit platforms,
which as usual makes up the bulk of the ARM SoC changes: 462 non-merge
changesets, 450 files changed, 23340 insertions, 5216 deletions.
The three platforms that are added with the "soc" branch are here as well,
and we add some related machine files:
- For Aspeed AST2400/AST2500, we get the evaluation platform and
the Tyan Palmetto POWER8 mainboard that uses the AST2400 BMC
- For Oxnas 810SE, the Western Digital "My Book World Edition"
is added as the only platform at the moment.
- For ARM MPS2, the AN385 (Cortex-M3) and AN399 (Cortex-M7)
are supported
On the ARM Realview development platform, we now support all machines
with device tree, previously only the board files were supported, which
in turn will likely be removed soon.
Qualcomm IPQ4019 is the second generation ARM based "Internet Processor",
following the IPQ806x that is used in many high-end WiFi routers. This one
integrates two ath10k wifi radios that were previously on separate chips.
Other boards that got added for existing chips are:
- On Ti OMAP family:
- Amazon Kindle Fire, first generation, tablet and ebook reader
- OnRISC Baltos iR 2110 and 3220 embedded industrial PCs
- TI AM5728 IDK, TI AM3359 ICE-V2, and TI DRA722 Rev C EVM
development systems
- On Samsung EXYNOS platform:
- Samsung ARTIK5 evaluation board, see
https://www.artik.io/modules/overview/artik-5/
- On NXP i.MX platforms:
- Ka-Ro electronics TX6S-8034, TX6S-8035, TX6U-8033, TX6U-81xx,
TX6Q-1036, TX6Q-1110/-1130, TXUL-0010 and TXUL-0011 industrial
SoM modules
- Embest MarS Board i.MX6Dual DIY platform
- Boundary Devices i.MX6 Quad Plus Nitrogen6_MAX and
SoloX Nitrogen6sx embedded boards
- Technexion Pico i.MX6UL compute module
- ZII VF610 Development Board
- On Marvell embedded (mvebu, orion, kirkwood) platforms:
- Linksys Viper (E4200v2 / EA4500) WiFi router
- Buffalo Kurobox Pro NAS
- On Qualcomm Snapdragon:
- Arrow DragonBoard 600c (96boards) with APQ8064 Snapdragon 600
- On Rockchips platform:
- mqmaker MiQi single-board computer
- On Altera SoCFPGA:
- samtec VIN|ING 1000 vehicle communication interface
- On Allwinner Sunxi platforms:
- Dserve DSRV9703C tablet
- Difrnce DIT4350 tablet
- Colorfly E708 Q1 tablet
- Polaroid MID2809PXE04 tablet
- Olimex A20 OLinuXino LIME2 single board computer
- Xunlong Orange Pi 2, Orange Pi One, and Orange Pi PC
single board computers
Across many platforms, bug fixes went in to address warnings that
dtc now emits with 'make dtbs W=1'. Further changes for device enablement
went into Ti OMAP, bcm283x (Raspberry Pi), bcm47xx (wifi router),
Ti Davinci, Samsung EXYNOS, Marvell mvebu/kirkwood/orion, NXP i.MX/Vybrid
NXP LPC18xx, NXP LPC32xx, Renesas shmobile/r-mobile/r-car, Rockchips
rk3xxx, ST Ux500, ST STi, Atmel AT91/SAMA5, Altera SoCFPGA, Allwinner
Sunxi, Sigma Designs Tango, NVIDIA Tegra, Socionext Uniphier and ARM
Versatile Express.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIVAwUAVzuXhGCrR//JCVInAQJXjhAA1bV0fbREflRQrlXdMb4rNesygH8ikaja
gOYHE1yO+tSitHZ5g4w2yAFIEK7DzFdO5rz53BEINZfLCj4LO4495/z9ipqZQEjC
rw5IL89jAn8x4wF791SHjLpmmNRbHN2vjLcsX3ShJIHckip/jIbiU2aFJuohA0TU
jxpPAZzhaKsu/rDaVzHMS/im4LbZQ2qI3DxUUn6Kt8c468i4Ns22sowqSjh2xO/X
YiwHD0eAvDrySfMGiNT82wMMTfMF2KfXZGB885isMP4hK8OIDrOnI5nM9rxyRFfu
N14o0+tN1S2JzBHnqOOpib6JxYyCVr+QTjsKGAyR5X1mGINIhX8f1gy0EvFFxXKT
rIATc5VTeo4gc1quij8RVtDEp/4iJ8GspH4WGMh1F8tjTe+WUxeSMkxdf6/QY1+Q
vZKT0KKihoJQu1xI62NjnaRbfbhwx2BSWehwgXVd72lD19dG5LPw+Nj6/8+Bgouc
YxJahgkB9MMtHoNp8huMg33Gr9a07/yVxc4CztXtf7N9phd0nEXov2iM1aBgazLU
8IVd3Z9lZA+4iGVcj3oBJ6K1IkiCmg2qoNyF6tcInR5vPjKLECuxyuZw8VKuUuHD
k/s/rymSGRlDN5i4F0h0r4MvQ9gkYfwk8xiL3ofmwYHwo103Q7b7Cw55XRk88EoB
appd5QA+pko=
=Nx46
-----END PGP SIGNATURE-----
Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM DT updates from Arnd Bergmann:
"These are all the updates to device tree files for 32-bit platforms,
which as usual makes up the bulk of the ARM SoC changes: 462 non-merge
changesets, 450 files changed, 23340 insertions, 5216 deletions.
The three platforms that are added with the "soc" branch are here as
well, and we add some related machine files:
- For Aspeed AST2400/AST2500, we get the evaluation platform and the
Tyan Palmetto POWER8 mainboard that uses the AST2400 BMC
- For Oxnas 810SE, the Western Digital "My Book World Edition" is
added as the only platform at the moment.
- For ARM MPS2, the AN385 (Cortex-M3) and AN399 (Cortex-M7) are
supported
On the ARM Realview development platform, we now support all machines
with device tree, previously only the board files were supported,
which in turn will likely be removed soon.
Qualcomm IPQ4019 is the second generation ARM based "Internet
Processor", following the IPQ806x that is used in many high-end WiFi
routers. This one integrates two ath10k wifi radios that were
previously on separate chips.
Other boards that got added for existing chips are:
Ti OMAP family:
- Amazon Kindle Fire, first generation, tablet and ebook reader
- OnRISC Baltos iR 2110 and 3220 embedded industrial PCs
- TI AM5728 IDK, TI AM3359 ICE-V2, and TI DRA722 Rev C EVM
development systems
Samsung EXYNOS platform:
- Samsung ARTIK5 evaluation board, see
https://www.artik.io/modules/overview/artik-5/
NXP i.MX platforms:
- Ka-Ro electronics TX6S-8034, TX6S-8035, TX6U-8033, TX6U-81xx,
TX6Q-1036, TX6Q-1110/-1130, TXUL-0010 and TXUL-0011 industrial
SoM modules
- Embest MarS Board i.MX6Dual DIY platform
- Boundary Devices i.MX6 Quad Plus Nitrogen6_MAX and SoloX
Nitrogen6sx embedded boards
- Technexion Pico i.MX6UL compute module
- ZII VF610 Development Board
Marvell embedded (mvebu, orion, kirkwood) platforms:
- Linksys Viper (E4200v2 / EA4500) WiFi router
- Buffalo Kurobox Pro NAS
Qualcomm Snapdragon:
- Arrow DragonBoard 600c (96boards) with APQ8064 Snapdragon 600
Rockchips platform:
- mqmaker MiQi single-board computer
Altera SoCFPGA:
- samtec VIN|ING 1000 vehicle communication interface
Allwinner Sunxi platforms:
- Dserve DSRV9703C tablet
- Difrnce DIT4350 tablet
- Colorfly E708 Q1 tablet
- Polaroid MID2809PXE04 tablet
- Olimex A20 OLinuXino LIME2 single board computer
- Xunlong Orange Pi 2, Orange Pi One, and Orange Pi PC single board
computers
Across many platforms, bug fixes went in to address warnings that dtc
now emits with 'make dtbs W=1'. Further changes for device enablement
went into Ti OMAP, bcm283x (Raspberry Pi), bcm47xx (wifi router), Ti
Davinci, Samsung EXYNOS, Marvell mvebu/kirkwood/orion, NXP i.MX/Vybrid
NXP LPC18xx, NXP LPC32xx, Renesas shmobile/r-mobile/r-car, Rockchips
rk3xxx, ST Ux500, ST STi, Atmel AT91/SAMA5, Altera SoCFPGA, Allwinner
Sunxi, Sigma Designs Tango, NVIDIA Tegra, Socionext Uniphier and ARM
Versatile Express"
* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (458 commits)
ARM: dts: tango4: Import watchdog node
ARM: dts: tango4: Update cpus node for cpufreq
ARM: dts: tango4: Update DT to match clk driver
ARM: dts: tango4: Initial thermal support
arm/dst: Add Aspeed ast2500 device tree
arm/dts: Add Aspeed ast2400 device tree
ARM: sun7i: dt: Add pll3 and pll7 clocks
ARM: dts: sunxi: Add a olinuxino-lime2-emmc
ARM: dts: at91: sama5d4: add trng node
ARM: dts: at91: sama5d3: add trng node
ARM: dts: at91: sama5d2: add trng node
ARM: dts: at91: at91sam9g45 family: reduce the trng register map size
ARM: sun4i: dt: Add pll3 and pll7 clocks
ARM: sun5i: chip: Enable the TV Encoder
ARM: sun5i: r8: Add display blocks to the DTSI
ARM: sun5i: a13: Add display and TCON clocks
ARM: dts: ux500: configure the accelerometers open drain
ARM: mx5: dts: Enable USB OTG on M53EVK
ARM: dts: imx6ul-14x14-evk: Add audio support
ARM: dts: imx6qdl: Remove unneeded unit-addresses
...
Pull networking updates from David Miller:
"Highlights:
1) Support SPI based w5100 devices, from Akinobu Mita.
2) Partial Segmentation Offload, from Alexander Duyck.
3) Add GMAC4 support to stmmac driver, from Alexandre TORGUE.
4) Allow cls_flower stats offload, from Amir Vadai.
5) Implement bpf blinding, from Daniel Borkmann.
6) Optimize _ASYNC_ bit twiddling on sockets, unless the socket is
actually using FASYNC these atomics are superfluous. From Eric
Dumazet.
7) Run TCP more preemptibly, also from Eric Dumazet.
8) Support LED blinking, EEPROM dumps, and rxvlan offloading in mlx5e
driver, from Gal Pressman.
9) Allow creating ppp devices via rtnetlink, from Guillaume Nault.
10) Improve BPF usage documentation, from Jesper Dangaard Brouer.
11) Support tunneling offloads in qed, from Manish Chopra.
12) aRFS offloading in mlx5e, from Maor Gottlieb.
13) Add RFS and RPS support to SCTP protocol, from Marcelo Ricardo
Leitner.
14) Add MSG_EOR support to TCP, this allows controlling packet
coalescing on application record boundaries for more accurate
socket timestamp sampling. From Martin KaFai Lau.
15) Fix alignment of 64-bit netlink attributes across the board, from
Nicolas Dichtel.
16) Per-vlan stats in bridging, from Nikolay Aleksandrov.
17) Several conversions of drivers to ethtool ksettings, from Philippe
Reynes.
18) Checksum neutral ILA in ipv6, from Tom Herbert.
19) Factorize all of the various marvell dsa drivers into one, from
Vivien Didelot
20) Add VF support to qed driver, from Yuval Mintz"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1649 commits)
Revert "phy dp83867: Fix compilation with CONFIG_OF_MDIO=m"
Revert "phy dp83867: Make rgmii parameters optional"
r8169: default to 64-bit DMA on recent PCIe chips
phy dp83867: Make rgmii parameters optional
phy dp83867: Fix compilation with CONFIG_OF_MDIO=m
bpf: arm64: remove callee-save registers use for tmp registers
asix: Fix offset calculation in asix_rx_fixup() causing slow transmissions
switchdev: pass pointer to fib_info instead of copy
net_sched: close another race condition in tcf_mirred_release()
tipc: fix nametable publication field in nl compat
drivers: net: Don't print unpopulated net_device name
qed: add support for dcbx.
ravb: Add missing free_irq() calls to ravb_close()
qed: Remove a stray tab
net: ethernet: fec-mpc52xx: use phy_ethtool_{get|set}_link_ksettings
net: ethernet: fec-mpc52xx: use phydev from struct net_device
bpf, doc: fix typo on bpf_asm descriptions
stmmac: hardware TX COE doesn't work when force_thresh_dma_mode is set
net: ethernet: fs-enet: use phy_ethtool_{get|set}_link_ksettings
net: ethernet: fs-enet: use phydev from struct net_device
...
- Support for the PMU in Broadcom's Vulcan CPU
- Dynamic event detection using the PMCEIDn_EL0 ID registers
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABCgAGBQJXNhyFAAoJELescNyEwWM0A0gIAL52VQid16PvLgEO4g6mzv5B
S1ef/y45342R/DYczcUSFboMPuqYSxZ/i7dCwpvLUKX/YjyqQrrGvvS4IYOS99Mp
/OAcf8eTyzzVpJiGQetta3q20gNHGXOxd48R1zcgt+bbEax89lyHQul0A8+rPWLq
RZhEI6Hcq9fb70AjXjWvDxdbbJhtDKc8BGuptygOEqc8LO3mrb1J60TclU629XOH
Jn4Vdu5f6Rx8hPFdw5HXn+Vdheymphz0qj1lyGCQS4Am97bM5J/54a/A4tyHnHuQ
s9Y26NIAvrktp9wCMlXGQhYL94e1rZowXCWxF98D9XrlIzYORIdf/OZ5DCS8LCA=
=0ntf
-----END PGP SIGNATURE-----
Merge tag 'arm64-perf' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 perf updates from Will Deacon:
"The main addition here is support for Broadcom's Vulcan core using the
architected ID registers for discovering supported events.
- Support for the PMU in Broadcom's Vulcan CPU
- Dynamic event detection using the PMCEIDn_EL0 ID registers"
* tag 'arm64-perf' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: perf: don't expose CHAIN event in sysfs
arm64/perf: Add Broadcom Vulcan PMU support
arm64/perf: Filter common events based on PMCEIDn_EL0
arm64/perf: Access pmu register using <read/write>_sys_reg
arm64/perf: Define complete ARMv8 recommended implementation defined events
arm64/perf: Changed events naming as per the ARM ARM
arm64: dts: Add Broadcom Vulcan PMU in dts
Documentation: arm64: pmu: Add Broadcom Vulcan PMU binding
- New board support of LS1043a-QDS from Freescale/NXP
- Add new compatible for LS1043A and LS2080A GPIO devices
- Update device tree bindings and sources for LS2080A fsl-mc device
- Update QSPI and DSPI support on LS1043A and LS2080A
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJXKL1RAAoJEFBXWFqHsHzOdO8H/1HeVve6KqhjpgHEYI0vqCQN
F8dC3kA8S9UZcozl58VrKvH+ArR2dcumfdl6ov/WVdfuWDwcBN3SKYgCK4xV1aN9
QtxFkc7uiE4InyDl4w9Q3fGRZfCgzk3eYUWQmHw6D0oQc3UhoIZ3cK+aKMB2nlZ1
Q4e0pO3Ell96sKYIhaG6rltlLc9U6Ax4z1XDl1CZ/T2njARFqwBfgNkjSdguB0Ks
+GOCd/TyloncdWoC41MQnwaOWc+msa3rkXJG2Aj1PWyocZPIiY0K68RClv1g/yKk
XZJ3M574QK+n/+Em0t+QaxrggiqT6kzr00CfULyyXQ4xhZO1siByCuxdEFW/tAs=
=pZW5
-----END PGP SIGNATURE-----
Merge tag 'imx-dt64-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/dt64
Merge "The Freescale/NXP arm64 device tree updates for 4.7" from Shawn Guo:
- New board support of LS1043a-QDS from Freescale/NXP
- Add new compatible for LS1043A and LS2080A GPIO devices
- Update device tree bindings and sources for LS2080A fsl-mc device
- Update QSPI and DSPI support on LS1043A and LS2080A
* tag 'imx-dt64-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: dts: ls2080a: fsl-mc dt node updates
Documentation: fsl-mc: binding updates for MSIs, ranges, PHYs
arm64: dts: ls1043a: add the DTS node for QSPI support
Documentation: fsl-quadspi: Add fsl,ls1043a-qspi compatible string
arm64: dts: ls2080a: Add compatible "fsl,ls2080a-gpio" for ls2080a gpio nodes
arm64: dts: ls1043a: Add compatible "fsl,qoriq-gpio" for ls1043a gpio nodes
arm64: dts: ls2080a: update the DTS for QSPI and DSPI support
Documentation: fsl: dspi: Add fsl,ls2080a-dspi compatible string
arm64: dts: ls1043a-rdb: add the DTS for DSPI support
arm64: dts: add LS1043a-QDS board support
Documentation: DT: Add entry for Freescale LS1043a-QDS board
Complement the GM20B GPU device tree node on Tegra210 with missing
properties to make it usable.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=yX4c
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-4.7-gm20b' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/dt64
Merge "arm64: tegra: Enable GM20B GPU on Tegra210" from Thierry Reding:
Complement the GM20B GPU device tree node on Tegra210 with missing
properties to make it usable.
* tag 'tegra-for-4.7-gm20b' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
arm64: tegra: Add IOMMU node to GM20B on Tegra210
arm64: tegra: Add reference clock to GM20B on Tegra210
dt-bindings: Add documentation for GM20B GPU
dt-bindings: gk20a: Document iommus property
dt-bindings: gk20a: Fix typo in compatible name
- switch to label in the mvebu arm64 device tree
- use new clock binding on Armada 7K/8K
- improve SPI and I2C description on Armada 7K/8k
- add CP110 block adding PCIe, SATA and USB3
- add XOR support on Armada 3700
- few more little fix
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iEYEABECAAYFAlcjbaAACgkQCwYYjhRyO9VaVgCghxZq/0qnD5+k5ouUvSYwXiOo
EV8AoIL6w3bn64kY93M0o8RtrG4WLe+h
=Pilg
-----END PGP SIGNATURE-----
Merge tag 'mvebu-dt64-4.7-1' of git://git.infradead.org/linux-mvebu into next/dt64
Merge "mvebu dt64 for 4.7" from Gregory CLEMENT:
- switch to label in the mvebu arm64 device tree
- use new clock binding on Armada 7K/8K
- improve SPI and I2C description on Armada 7K/8k
- add CP110 block adding PCIe, SATA and USB3
- add XOR support on Armada 3700
- few more little fix
* tag 'mvebu-dt64-4.7-1' of git://git.infradead.org/linux-mvebu:
arm64: dts: marvell: add XOR node for Armada 3700 SoC
arm64: dts: marvell: Use a SoC-specific compatible for xHCI on Armada37xx
arm64: dts: marvell: Rename armada-37xx USB node
arm64: dts: marvell: Clean up armada-3720-db
arm64: dts: marvell: enable several CP interfaces on Armada 7040-DB
arm64: dts: marvell: initial DT description of Armada 7K/8K CP110 master
arm64: dts: marvell: use the proper I2C controller compatible string for 7K/8K
arm64: dts: marvell: improve SPI flash description on Armada 7040-DB
arm64: dts: marvell: use new clock binding on Armada AP806
arm64: dts: marvell: add UART aliases and define stdout-path
arm64: dts: marvell: rename armada-ap806 XOR nodes
arm64: dts: marvell: clean up armada-7040-db
dts for the evaluation board of this chip and similar to the arm32
side also move the rk3368 thermal data into the core soc dtsi, as
there really is no need to keep it separate.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABCAAGBQJXIoubAAoJEPOmecmc0R2B/kQH/1gcN5C5JM4kkohUyEJ2uBju
zIwbfw4TyV/ndMUb1rCj8XUTBvbz80PvNKmsYJXERr8fUtjRaA71Wf8iJsqyaqDz
NQ3ygC30ZtmG2Z39ekn4cZ7zqjxwrEmY53vFfR4oDd1ENNVh14g26qxLfYDG7SXD
RGB729icDa2wr9W0doNc9khcQDFY3j4pbz+v8tfDoVcbFZWeq5K4SnbvB0VVQBCA
sS0EJV0KUUSlZ5okJuoZUx5UeeodJaV8uvygOboL644kI8hNnnp4rCP23paZ/d0H
ot5IcrXDjpCHCEQdQpr3OsCnCgzeK0NL5F1ppJr2MYfjQJSWEaGFQatV2Ipquss=
=25Hx
-----END PGP SIGNATURE-----
Merge tag 'v4.7-rockchip-dts64-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt64
Merge "Rockchip dts64 updates for v4.7 - part2" from Heiko Stübner:
Adding the new rk3399 core devicetree support as well as a board
dts for the evaluation board of this chip and similar to the arm32
side also move the rk3368 thermal data into the core soc dtsi, as
there really is no need to keep it separate.
* tag 'v4.7-rockchip-dts64-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
dt-bindings: document rockchip rk3399-evb board
arm64: dts: rockchip: add dts file for RK3399 evaluation board
arm64: dts: rockchip: add core dtsi file for RK3399 SoCs
dt-bindings: rockchip-dw-mshc: add description for rk3399
clk: rockchip: export some necessary rk3399 clock ids
clk: rockchip: rename rga clock-id on rk3399
clk: rockchip: add general gpu soft-reset on rk3399
arm64: dts: rockchip: move the rk3368 thermal data into rk3368.dtsi
clk: rockchip: fix checkpatch errors in rk3399 dt-binding header
clk: rockchip: add dt-binding header for rk3399
In netdevice.h we removed the structure in net-next that is being
changes in 'net'. In macsec.c and rtnetlink.c we have overlaps
between fixes in 'net' and the u64 attribute changes in 'net-next'.
The mlx5 conflicts have to do with vxlan support dependencies.
Signed-off-by: David S. Miller <davem@davemloft.net>
are for the OMAP platforms, quoting Tony Lindgren:
Fixes for omaps for v4.6-rc cycle. All dts fixes, mostly
affecting voltages and pinctrl for various device drivers:
- Regulator minimum voltage fixes for omap5
- ISP syscon register offset fix for omap3
- Fix regulator initial modes for n900
- Fix omap5 pinctrl wkup instance size
The rest are all for different platforms:
- Allwinner:
Remove incorrect constraints from a dcdc1 regulator
- Alltera SoCFPGA:
Fix compilation in thumb2 mode
- Samsung exynos:
Fix a potential oops in the pm-domain error handling
- Davinci:
Avoid a link error if NVMEM is disabled
- Renesas:
Do not mark an external uart clock as disabled, to allow
probing the uarts
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=ymz3
-----END PGP SIGNATURE-----
Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Arnd Bergmann:
"Here are a couple last-minute fixes for ARM SoCs. Most of them are
for the OMAP platforms, the rest are all for different platforms.
OMAP:
All dts fixes, mostly affecting voltages and pinctrl for various
device drivers:
- Regulator minimum voltage fixes for omap5
- ISP syscon register offset fix for omap3
- Fix regulator initial modes for n900
- Fix omap5 pinctrl wkup instance size
Allwinner:
Remove incorrect constraints from a dcdc1 regulator
Alltera SoCFPGA:
Fix compilation in thumb2 mode
Samsung exynos:
Fix a potential oops in the pm-domain error handling
Davinci:
Avoid a link error if NVMEM is disabled
Renesas:
Do not mark an external uart clock as disabled, to allow probing
the uarts"
* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
ARM: davinci: only use NVMEM when available
ARM: SoCFPGA: Fix secondary CPU startup in thumb2 kernel
ARM: dts: omap5: fix range of permitted wakeup pinmux registers
ARM: dts: omap3-n900: Specify peripherals LDO regulators initial mode
ARM: dts: omap3: Fix ISP syscon register offset
ARM: dts: omap5-cm-t54: fix ldo1_reg and ldo4_reg ranges
ARM: dts: omap5-board-common: fix ldo1_reg and ldo4_reg ranges
arm64: dts: r8a7795: Don't disable referenced optional scif clock
ARM: EXYNOS: Properly skip unitialized parent clock in power domain on
ARM: dts: sun8i-q8-common: Do not set constraints on dc1sw regulator
Added 'channel' property, describing ethernet to CPU channel number.
Signed-off-by: Iyappan Subramanian <isubramanian@apm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Indexes should generally be avoided. This patch changes property port-id
to reg in dsaf port node.
Signed-off-by: Yisen Zhuang <yisen.zhuang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Armada 3700 SoC comprise one dual-channel XOR engine and this
patch adds its according representation.
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
This patch adds core dtsi file for Rockchip RK3399 SoCs.
The RK3399 has big/little architecture, which needs a separate
node for the PMU of each microarchitecture, for now it missing
the pmu node since the old one could not work well.
Signed-off-by: Jianqun Xu <jay.xu@rock-chips.com>
Tested-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
- Fix its node without msi-cells for hip05
- Add nor flash node for hip05 D02 board
- Add initial dts for hip06 D03 board
- Reorder and add the hip06 D03 binding in the binding document
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=OZ3Q
-----END PGP SIGNATURE-----
Merge tag 'hip0x-dt-for-4.7' of git://github.com/hisilicon/linux-hisi into next/dt64
Merge "ARM64: DT: Hisilicon hip05 and hip06 updates for 4.7" Wei Xu:
- Fix its node without msi-cells for hip05
- Add nor flash node for hip05 D02 board
- Add initial dts for hip06 D03 board
- Reorder and add the hip06 D03 binding in the binding document
* tag 'hip0x-dt-for-4.7' of git://github.com/hisilicon/linux-hisi:
Documentation: arm64: Add Hisilicon Hip06 D03 dts binding
arm64: dts: Add initial dts for Hisilicon Hip06 D03 board
arm64: dts: hip05: Add nor flash support
arm64: dts: hip05: fix its node without msi-cells
Minor overlapping changes in the conflicts.
In the macsec case, the change of the default ID macro
name overlapped with the 64-bit netlink attribute alignment
fixes in net-next.
Signed-off-by: David S. Miller <davem@davemloft.net>
Even if the Armada 37xx does not any specific setup, the device tree
binding documentation requires to use a SoC-specific version
corresponding to the platform first followed by the generic version.
This patch introduce this new compatible string and updates the
documentation accordingly.
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
No need to reflect the USB version in the node name.
Cc: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
[gregory.clement@free-electrons.com: drop Fixes tag as it is not a bug fix.]
Instead of duplicating the SoC's node hierarchy, including a bus node
named "internal-regs", reference the actually desired nodes by label,
like Berlin already does. Add labels where necessary.
Drop an inconsistent white line while at it.
Cc: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
[gregory.clement@free-electrons.com: drop Fixes tag as it is not a bug fix.]
The Hip06 soc has same cpu topology compared with Hip05, four clusters
and each cluster has quard Cortex-A57, but with different IO part,
like HNS, SAS and PCI, they are all upgraded. There are also not same
in ITS, MBIGEN and SMMU, etc.
This patch adds the initial dts for hip06 d03 board.
Note, there is no serial, because the soc use LPC uart, the serial node
is not needed.
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
This patch is to add support nor-flash. Notice, the pre-defined
partitions may not be used.
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Fix commit abf9c25d55 ("arm64: dts: hip05: Append all gicv3 ITS
entries"), it forgets the property msi-cell, see arm,gic-v3.txt.
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Hook up all devices that are part of the CPG/MSSR Clock Domain to the
SYSC "always-on" PM Domain, for a more consistent device-power-area
description in DT.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Add a device node for the System Controller.
Hook up the Cortex-A57 CPU cores and the Cortex-A57 and Cortex A53 L2
caches/SCUs to their respective PM Domains.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
clk_get() on a disabled clock node will return -EPROBE_DEFER, which can
cause drivers to be deferred forever if such clocks are referenced in
their devices' clocks properties.
Update the various disabled external clock nodes to default to a
frequency of 0, but don't disable them, to prevent this.
Reported-by: Jürg Billeter <j@bitron.ch>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
It can be used for the watchdog.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
The operating system driver can take advantage of the IOMMU to remove
the need for physically contiguous memory buffers.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
This clock is required for the GPU to operate.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
This commit enables several interfaces of the CP side of the Armada
7040 for the Armada 7040 DB board:
- one PCIe interface
- one SPI controller with an attached SPI flash
- one I2C controller
- one SATA controller
- two USB3 controllers
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
This commit adds an initial Device Tree description for the CP110
master that is found in the Armada 7K and 8K SoCs. This initial
description describes:
- the system controller (to provide clocks)
- three PCIe interfaces
- the SATA interface
- the I2C controllers
- the SPI controllers
For the record, the organization of the SoCs is as follows:
- 7020: dual-core AP, one CP110 (master)
- 7040: quad-core AP, one CP110 (master)
- 8020: dual-core AP, two CP110s (master and slave)
- 8040: quad-core AP, two CP110s (master and slave)
For this reason, all of the 7020, 7040, 8020 and 8040 include
armada-cp110-master.dtsi. When support for the second CP110 (slave)
used in 8020 and 8040 will be added, the .dtsi files for those SoCs
will in addition include armada-cp110-slave.dtsi.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
The I2C controller found in the Marvell Armada 7K/8K provides the
bridge/offloading features, so the Device Tree should use the
marvell,mv78230-i2c compatible string instead of marvell,mv64xxx-i2c.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
This commit slightly improves the description of the SPI flash
connected to the SPI controller of the Armada 7040, by:
- Using the more generic "jedec,spi-nor" compatible string, which
lets the driver auto-detect the exact SPI flash type.
- Removing the silly comment about the Chip Select, since reg = <0>
is explicit enough.
- Switching to the new Device Tree binding to describe flash
partitions.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
This commit updates the Marvell AP806 Device Tree description to make
use of the accepted clock Device Tree binding.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
This commit adds the necessary UART aliases to the main Armada 7K/8K
.dtsi file, and uses them to define the /chosen/stdout-path property
on the Armada 7040 DB board.
Suggested-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Node names should not contain an instance number, the unit address
serves to distinguish nodes of the same name. So rename the XOR nodes
to just xor@<address>.
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
[Thomas:
- remove labels, they are really not needed for XOR engines.
- remove the Fixes: tag, as this is not a fix.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Instead of duplicating the node hierarchy, reference the nodes by label,
adding labels where necessary.
Drop some trailing or inconsistent white lines while at it.
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
[Thomas: drop Fixes tag as it is not a bug fix.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Because debug dsaf port was separated from service dsaf port, this patch
updates the related configurations of hns dts, changes it to match with
the new binding files. This also removes enet nodes which don't exist in
d02 board.
Signed-off-by: Yisen Zhuang <yisen.zhuang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
updates to the fsl-mc node for full functionality:
-msi-parent is needed for interrupt support
-ranges is needed to enable the bus driver to translate bus addresses
-dpmac nodes provide a basis for relating dpmac objects to PHYs
Signed-off-by: Stuart Yoder <stuart.yoder@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
clk_get() on a disabled clock node will return -EPROBE_DEFER, which can
cause drivers to be deferred forever if such clocks are referenced in
their devices' clocks properties.
Update the disabled external scif clock node so that it
is not disabled to prevent this.
Reported-by: Jürg Billeter <j@bitron.ch>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
[simon: fix for v4.6 extracted from a larger patch targeted at v4.7]
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Include the development base board, which is equipped with some
devices such as EEPROM.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Anup enables a bunch of standard peripherals in the Northstar 2 DTS: PL330
DMA, GIC maintenance interrupt, PL022 SPI controller
- Anup also re-orgnanizes the clock Device Tree fragments into a separate file
for consistency with how other Broadcom SoCs are doing this
- Luke switches the SMP enable-method and reboot from a spin-table + syscon to
the standard PSCI 1.0 firmware interface
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=6mn8
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-4.7/devicetree-arm64' of http://github.com/Broadcom/stblinux into next/dt64
Pull "Broadcom ARM64-based SoC Device Tree changes" from Florian Fainelli:
- Anup enables a bunch of standard peripherals in the Northstar 2 DTS: PL330
DMA, GIC maintenance interrupt, PL022 SPI controller
- Anup also re-orgnanizes the clock Device Tree fragments into a separate file
for consistency with how other Broadcom SoCs are doing this
- Luke switches the SMP enable-method and reboot from a spin-table + syscon to
the standard PSCI 1.0 firmware interface
* tag 'arm-soc/for-4.7/devicetree-arm64' of http://github.com/Broadcom/stblinux:
arm64: dts: NS2 secondary core enablement via PSCI
arm64: dts: Add ARM PL022 SPI DT nodes for NS2
arm64: dts: Move NS2 clock DT nodes to separate DT file
arm64: dts: Add maintenance interrupt for GIC in NS2 DT
arm64: dts: Add ARM PL330 DMA DT node for NS2
This patch set only includes a single change to
fix the compatible string for SATA controllers on
X-Gene v2 SOC platforms.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=Wnq5
-----END PGP SIGNATURE-----
Merge tag 'xgene-dts-for-v4.7-part1' of https://github.com/AppliedMicro/xgene-next into next/dt64
Merge "First part of X-Gene DTS changes queued for v4.7" from Duc Dang:
This patch set only includes a single change to
fix the compatible string for SATA controllers on
X-Gene v2 SOC platforms.
* tag 'xgene-dts-for-v4.7-part1' of https://github.com/AppliedMicro/xgene-next:
arm64: dts: apm: Fix compatible string for X-Gene 2 SATA controller DTS node
- Reserve memory regions for Hi6220
- Add sp804 timer node for Hi6220
- Add cpu and cluster level's low power state for Hi6220
- Add gpio configuration nodes for Hi6220
- Add pinctrl configuration nodes for Hi6220
- Add spi related nodes for Hi6220
- Add i2c nodes for Hi6220
- Add i2c nodes to work with mezzanine boards
- Add usb nodes for Hi6220
- Add mailobx node for Hi6220
- Add SRAM node and stub clock node for Hi6220
- Add pinctrl nodes for uarts and enable them
- Add LED nodes for hi6220-hikey board
- Add hi655x pmic node for Hi6220
- Add dwmmc nodes for Hi6220
- Add wifi nodes support for Hi6220-Hikey board
- Register thermal sensor for Hi6220
- Register Hi6220's thermal zone for power allocator
- Add L2 cache topology for Hi6220
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=MpZ0
-----END PGP SIGNATURE-----
Merge tag 'hi6220-dt-for-4.7' of git://github.com/hisilicon/linux-hisi into next/dt64
Pull "ARM64: DT: Hisilicon Hi6220 soc and hikey board updates for 4.7" from Wei Xu
- Reserve memory regions for Hi6220
- Add sp804 timer node for Hi6220
- Add cpu and cluster level's low power state for Hi6220
- Add gpio configuration nodes for Hi6220
- Add pinctrl configuration nodes for Hi6220
- Add spi related nodes for Hi6220
- Add i2c nodes for Hi6220
- Add i2c nodes to work with mezzanine boards
- Add usb nodes for Hi6220
- Add mailobx node for Hi6220
- Add SRAM node and stub clock node for Hi6220
- Add pinctrl nodes for uarts and enable them
- Add LED nodes for hi6220-hikey board
- Add hi655x pmic node for Hi6220
- Add dwmmc nodes for Hi6220
- Add wifi nodes support for Hi6220-Hikey board
- Register thermal sensor for Hi6220
- Register Hi6220's thermal zone for power allocator
- Add L2 cache topology for Hi6220
* tag 'hi6220-dt-for-4.7' of git://github.com/hisilicon/linux-hisi:
arm64: dts: Add L2 cache topology to Hi6220
arm64: dts: register Hi6220's thermal zone for power allocator
arm64: dts: register Hi6220's thermal sensor
arm64: dts: add wifi nodes support for hi6220-hikey
arm64: dts: add dwmmc nodes for hi6220
arm64: dts: hikey: Add hi655x pmic dts node
arm64: dts: add LED nodes for hi6220-hikey
arm64: dts: hi6220: add pinctrl for uarts and enable them
arm64: dts: add Hi6220's stub clock node
arm64: dts: add mailbox node for Hi6220
arm64: dts: Add hi6220 usb node
arm64: dts: hikey: enable i2c0 and i2c1 for working with mezzanine boards
arm64: dts: add all hi6220 i2c nodes
arm64: dts: add Hi6220 spi configuration nodes
arm64: dts: add Hi6220 pinctrl configuration nodes
arm64: dts: Add Hi6220 gpio configuration nodes
arm64: dts: enable idle states for Hi6220
arm64: dts: add sp804 timer node for Hi6220
arm64: dts: Reserve memory regions for hi6220
Just one update: Support for external expansion bus useful for
additional hardware e.g.LogicTile Express daughterboards (Brian Starkey)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=ypy7
-----END PGP SIGNATURE-----
Merge tag 'juno-for-v4.7/dt-updates' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into next/dt64
Pull "ARMv8 Juno DT updates for v4.7" from Sudeep Holla:
Just one update: Support for external expansion bus useful for
additional hardware e.g.LogicTile Express daughterboards (Brian Starkey)
* tag 'juno-for-v4.7/dt-updates' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
arm64: dts: juno: Add external expansion bus to DT
A couple of cleanups and fixes to various device trees, enable power and
volume keys on Jetson TX1, use stdout-path to define the serial port (so
it doesn't have to be specified on the kernel command-line) and add
Google Pixel C (a.k.a. Smaug) support.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=2hlL
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-4.7-arm64' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/dt64
Merge "arm64: tegra: Changes for v4.7-rc1" from Thierry Reding
A couple of cleanups and fixes to various device trees, enable power and
volume keys on Jetson TX1, use stdout-path to define the serial port (so
it doesn't have to be specified on the kernel command-line) and add
Google Pixel C (a.k.a. Smaug) support.
* tag 'tegra-for-4.7-arm64' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
arm64: tegra: Enable cros-ec and charger on Smaug
arm64: tegra: Add pinmux for Smaug board
arm64: tegra: Add stdout-path for various boards
arm64: tegra: Remove unused #power-domain-cells property
arm64: tegra: Add gpio-keys nodes for Smaug
arm64: tegra: Enable power and volume keys on Jetson TX1
arm64: tegra: Add support for Google Pixel C
arm64: tegra: Replace legacy *,wakeup property with wakeup-source
arm64: tegra: Fix copy/paste typo in several DTS includes
arm64: tegra: Remove 0, prefix from unit-addresses
1. Add PL330 DMA controller and Thermal Management Unit to Exynos 7.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=lzL+
-----END PGP SIGNATURE-----
Merge tag 'samsung-dt64-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/dt64
Merge "Samsung Device Tree ARM64 updates and improvements for v4.7" from Krzysztof Kozlowski:
1. Add PL330 DMA controller and Thermal Management Unit to Exynos 7.
* tag 'samsung-dt64-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
arm64: dts: Add nodes for pdma0 and pdma1 for exynos7
arm64: dts: exynos: Add TMU node for exynos7
In order to be standard to manage for rockchip SoCs, move the thermal
data into rk3368 dtsi, we needn't to add a new file for thermal.
Signed-off-by: Caesar Wang <wxt@rock-chips.com>
Cc: Zhang Rui <rui.zhang@intel.com>
Cc: Eduardo Valentin <edubezval@gmail.com>
Cc: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Declare PSCI-1.0 node and enable CPU_ON method via PSCI. Spin-table
memreserve has been removed as well as syscon based reset, as PSCI-1.0
expects reset implementation in firmware.
Signed-off-by: Luke Starrett <luke.starrett@broadcom.com>
Acked-by: Scott Branden <scott.branden@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
This adds the thermal controller and auxadc nodes to the Mediatek MT8173
dtsi file.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Reviewed-by: Daniel Kurtz <djkurtz@chromium.org>
Acked-by: Eduardo Valentin <edubezval@gmail.com>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
This patch adds the L2 cache topology on Hi6220. Hi6220 has two
clusters, every cluster has 512KiB L2 cache (32KiB x 16 ways).
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
With profiling Hi6220's power modeling so get dynamic coefficient and
sustainable power. So pass these parameters from DT.
Now enable power allocator with only one actor for CPU part, so directly
use cluster0's thermal sensor for monitoring temperature.
Reviewed-by: Javi Merino <javi.merino@arm.com>
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Add all three dwmmc nodes description for hi6220
Signed-off-by: Guodong Xu <guodong.xu@linaro.org>
Signed-off-by: Xinwei Kong <kong.kongxinwei@hisilicon.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Add the mfd hi655x dts node and regulator support on hi6220 platform.
Signed-off-by: Chen Feng <puck.chen@hisilicon.com>
Signed-off-by: Fei Wang <w.f@huawei.com>
Signed-off-by: Xinwei Kong <kong.kongxinwei@hisilicon.com>
Signed-off-by: Guodong Xu <guodong.xu@linaro.org>
Reviewed-by: Haojian Zhuang <haojian.zhuang@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Add LED nodes for hi6220-hikey. There are total 6 LEDs on HiKey.
Four general purposed, one for WiFi activity, and one for Bluetooth
activity.
Signed-off-by: Guodong Xu <guodong.xu@linaro.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Enable SRAM node and stub clock node for Hi6220, which uses mailbox
channel 1 for CPU's frequency change.
Furthermore, add the CPU clock phandle in CPU's node and using
operating-points-v2 to register operating points. So can be used by
cpufreq-dt driver.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Acked-by: Jassi Brar <jassisinghbrar@gmail.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
This patch add device mailbox node for Hi6220 in DT.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Acked-by: Jassi Brar <jassisinghbrar@gmail.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
In HiKey board dts file, enable i2c0 and i2c1 for working with 96boards' LS
mezzanine.
Signed-off-by: Guodong Xu <guodong.xu@linaro.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
This patch adds all I2C nodes for the Hi6220 SoC. This hi6220 Soc
use this I2C IP of Synopsys Designware for HiKey board.
Signed-off-by: Xinwei Kong <kong.kongxinwei@hisilicon.com>
Signed-off-by: Chen Feng <puck.chen@hisilicon.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Add Hi6220 spi configuration nodes. Disable by default in hi6220.dtsi
and enable it in board dts for usage of 96boards LS mezzanine board.
Signed-off-by: Zhong Kaihua <zhongkaihua@huawei.com>
Signed-off-by: Guodong Xu <guodong.xu@linaro.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Add cpu and cluster level's low power state for Hi6220.
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Add sp804 timer for hi6220, so it can be used as broadcast timer.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
On Hi6220, below memory regions in DDR have specific purpose:
0x05e0,0000 - 0x05ef,ffff: For MCU firmware using at runtime;
0x06df,f000 - 0x06df,ffff: For mailbox message data;
0x0740,f000 - 0x0740,ffff: For MCU firmware's section;
0x3e00,0000 - 0x3fff,ffff: For OP-TEE.
This patch reserves these memory regions in DT.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Add nodes for the ChromeOS Embedded Controller and for the gas gauge
connected to the I2C bus that it controls.
Signed-off-by: Rhyland Klein <rklein@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The Juno development platform has an external expansion bus which can
be used for additional hardware (e.g. LogicTile Express daughterboards).
Add this bus to the Juno base device-tree.
Acked-by: Liviu Dudau <Liviu.Dudau@arm.com>
Signed-off-by: Brian Starkey <brian.starkey@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
nodes for the core rk3368 and some cleanups for gpio-keys,
mmc and tsadc.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABCAAGBQJXDIe4AAoJEPOmecmc0R2B3acH/3U9VHCGVy7w5RNl/UISe6Eu
og7QZyy8r8dNw+bk9EX8x9AyqkN4bHAfAqg+Pc+JvxOeqmTjxFqPqZKWjEUQ8BOw
SPsJE0ZeRRYAvp1OYfR1ATGwRQDvJq+DaKtb9d8S6ZdYdwXWR/JhkXiCxpQGEqAO
TV82csxc86T+F+GJN63uk0UVfnZhzFtCJ6zSWBVyEpiUYxeQwTSkxjVUUJagOJLT
Wb/0qgD2b8L1Xs8Flj0zVwAsvNIBKlxsaXzhN9EBD9pnHDQJ1l2cU2EdsQtWCwlE
9ic2kwYFlgTrCAo1FITWFgyUTFLnuGcrfn2QIBIWK1X6TBJuYauGzslJEE96luw=
=zT4u
-----END PGP SIGNATURE-----
Merge tag 'v4.7-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt64
This contains the rk3368-geekbox as new board, mailbox device
nodes for the core rk3368 and some cleanups for gpio-keys,
mmc and tsadc.
* tag 'v4.7-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
Documentation: devicetree: rockchip: Document rk3368-GeekBox
arm64: dts: rockchip: Add rk3368 GeekBox dts
arm64: dts: rockchip: Clean up gpio-keys nodes
dt-bindings: Add vendor prefix for GeekBuying.com
arm64: dts: rockchip: Add rk3368 mailbox device nodes
arm64: dts: rockchip: remove broken-cd from emmc and sdio
arm64: dts: rockchip: fix the incorrect otp-out pin on rk3368
Signed-off-by: Olof Johansson <olof@lixom.net>
Add initial dtsi file to support lg1312 SoC which based on
Cortex-A53. Also add dts file to support lg1312 reference board
which based on lg1312 SoC.
Signed-off-by: Chanho Min <chanho.min@lge.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
* Use generic pinctrl properties in DT for salvator-x board
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=bcz4
-----END PGP SIGNATURE-----
Merge tag 'renesas-arm64-cleanup-for-v4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt64
Renesas ARM64 Based SoC Cleanup for v4.7
* Use generic pinctrl properties in DT for salvator-x board
* tag 'renesas-arm64-cleanup-for-v4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
arm64: dts: salvator-x: use generic pinctrl properties
Signed-off-by: Olof Johansson <olof@lixom.net>
We have two ARM PL022 SPI instances in NS2 SoC. On NS2 SVK,
one of the ARM PL022 SPI host has Silabs si3226x slic connected
to chip-select #0 whereas second ARM PL022 SPI host has Atmel
AT25 EEPROM connected to chip-select #0.
This patch adds ARM PL022, Silabs si3226x, and Atmel AT25
DT nodes in NS2 DT and NS2 SVK DT respectively.
Signed-off-by: Anup Patel <anup.patel@broadcom.com>
Reviewed-by: Ray Jui <rjui@broadcom.com>
Reviewed-by: Scott Branden <sbranden@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
For more readabilty and consistency with other Broadcom SoCs, we move
all NS2 clock DT nodes from main SoC DT file to a separate DT file.
We also update the license header in ns2.dtsi as-per new Broadcom
convention.
Signed-off-by: Anup Patel <anup.patel@broadcom.com>
Reviewed-by: Ray Jui <rjui@broadcom.com>
Reviewed-by: Scott Branden <sbranden@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
The KVM ARM64 requires GIC maintenance interrupt for VGIC emulation
so this patch adds the missing "interrupts" attribute to GIC node in
NS2 DT.
Signed-off-by: Anup Patel <anup.patel@broadcom.com>
Reviewed-by: Ray Jui <rjui@broadcom.com>
Reviewed-by: Scott Branden <sbranden@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
We have one ARM PL330 DMA instance with 8 channels in
NS2 SoC. Let's enable it for NS2 in NS2 DT.
Signed-off-by: Anup Patel <anup.patel@broadcom.com>
Reviewed-by: Ray Jui <rjui@broadcom.com>
Reviewed-by: Pramod KUMAR <pramodku@broadcom.com>
Reviewed-by: Scott Branden <sbranden@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
This patch adds device tree nodes for pdma0 and pdma1 controllers
found on exynos7 SoCs.
Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
The compatible "fsl,qoriq-gpio" is used by gpio driver:
drivers/gpio/gpio-mpc8xxx.c to implement general gpio
functionalities.
The chip-specific compatible "fsl,ls2080a-gpio" may be
used to fix potential gpio IP block errata or other
chip-specific gpio issues.
Signed-off-by: Liu Gang <Gang.Liu@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The compatible "fsl,qoriq-gpio" is used by gpio driver:
drivers/gpio/gpio-mpc8xxx.c to implement general gpio
functionalities.
The chip-specific compatible "fsl,ls1043a-gpio" may be
used to fix potential gpio IP block errata or other
chip-specific gpio issues.
Signed-off-by: Liu Gang <Gang.Liu@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This patch adds dts nodes for DSPI on LS1043A-RDB.
Signed-off-by: Yunhui Cui <B56489@freescale.com>
Signed-off-by: Yuan Yao <yao.yuan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
For Tegra boards, the device-tree alias serial0 is used for the console
and so add the stdout-path information so that the console no longer
needs to be passed via the kernel boot parameters.
For tegra132-norrin the alias serial0 is not defined and so add this.
This has been tested on tegra132-norrin and tegra210-p2371-0000.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Remove the "#power-domain-cells" property which was incorrectly
included by commit e53095857166 ("arm64: tegra: Add Tegra210
support").
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add gpio-keys nodes for the volumn controls, lid switch, tablet mode and
power button.
Signed-off-by: Rhyland Klein <rklein@nvidia.com>
Reviewed-by: Andrew Bresticker <abrestic@chromium.org>
[treding@nvidia.com: use symbolic names for input types and codes]
[treding@nvidia.com: use wakeup-source instead of gpio-key,wakeup]
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add a gpio-keys device tree node to represent the Power, Volume Up and
Volume Down keys found on Jetson TX1.
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add initial device-tree support for Google Pixel C (a.k.a. Smaug) based
upon Tegra210 SoC with 3 GiB of LPDDR4 RAM.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Alexandre Courbot <acourbot@nvidia.com>
Reviewed-by: Andrew Bresticker <abrestic@chromium.org>
Tested-by: Andrew Bresticker <abrestic@chromium.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Though the keyboard and other driver will continue to support the legacy
"gpio-key,wakeup", "nvidia,wakeup-source" boolean property to enable the
wakeup source, "wakeup-source" is the new standard binding.
This patch replaces all the legacy wakeup properties with the unified
"wakeup-source" property in order to avoid any further copy-paste
duplication.
Cc: Stephen Warren <swarren@wwwdotorg.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Alexandre Courbot <gnurou@gmail.com>
Cc: linux-tegra@vger.kernel.org
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The comment about the 8250 vs. APB DMA-enabled UART devices that was
added for Tegra20 and Tegra30 in commit b6551bb933 ("ARM: tegra: dts:
add aliases and DMA requestor for serial controller") introduced a typo
that has since spread to various other DTS include files. Fix all
occurrences of this typo.
Suggested-by: Ralf Ramsauer <ralf@ramses-pyramidenbau.de>
Signed-off-by: Thierry Reding <treding@nvidia.com>
When Tegra124 support was first merged the unit-addresses of all devices
were listed with a "0," prefix to encode the reg property's second cell.
It turns out that this notation is not correct, and the "," separator is
only used to separate fields in the unit address (such as the device and
function number in PCI devices), not individual cells for addresses with
more than one cell.
Signed-off-by: Thierry Reding <treding@nvidia.com>
The GeekBox contains an MXM3 module with a Rockchip RK3368 SoC.
Some connectors are available directly on the module.
This adds initial support, namely serial, USB, GMAC, eMMC, IR and TSADC.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Add minimal DT files for the Amlogic P20x development boards, based on
the Amlogic S905/GXBB SoC.
Cc: Andreas Färber <afaerber@suse.de>
Cc: Carlo Caione <carlo@endlessm.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Add minimal DT files for the Hardkernel ODROID-C2 board based on the
Amlogic S905/GXBB SoC.
Used the other gxbb boards from Andreas Färber as a starting point.
Cc: Andreas Färber <afaerber@suse.de>
Cc: Carlo Caione <carlo@endlessm.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Apparently, it's not valid to have an alias point to a disabled device.
Fix this by moving the aliases that are used (serial0) into the files
that use them, and remove aliases to disabled devices (serial1).
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Resolve the following warnings from new dtc by adding the unit address:
DTC arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95-pro.dtb
Warning (unit_address_vs_reg): Node /memory has a reg or ranges property, but no unit name
DTC arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95-meta.dtb
Warning (unit_address_vs_reg): Node /memory has a reg or ranges property, but no unit name
DTC arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95-telos.dtb
Warning (unit_address_vs_reg): Node /memory has a reg or ranges property, but no unit name
Fixes: cc733bc906 ("ARM64: dts: amlogic: Add Tronsmart Vega S95 configs")
Signed-off-by: Andreas Färber <afaerber@suse.de>
The LS1043a-QDS board is a high-performance computing, evaluation,
development, and test platform supporting the LS1043a SoC.
shawn.guo: sort the entries in Makefile alphabetcially
Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com>
Signed-off-by: Mingkai Hu <Mingkai.Hu@freescale.com>
Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The PCI memory windows available in vulcan.dtsi are limited to 128MB
for 32-bit BARs, and 4GB for 64-bit BARs. Given the memory mapped IO
space available in arm64, these windows can be increased substantially
to support more use cases.
The change increases the 32-bit window to 256MB and the 64-bit window
to 128 GB. The firmware on vulcan boards will use these ranges as well.
PCI IO windows are not supported on Vulcan, so remove them instead of
keeping an unused value.
Signed-off-by: Jayachandran C <jchandra@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Drop superfluous #address-cells and #size-cells.
Use KEY_POWER define for 116.
Rename sub-nodes to avoid new dtc warnings.
Reported-by: Julien Chauveau <chauveau.julien@gmail.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Julien Chauveau <chauveau.julien@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
This adds mailbox device nodes in dts.
Mailbox is used by the Rockchip CPU cores to communicate
requests to MCU processor.
Signed-off-by: Caesar Wang <wxt@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
This patch adds TMU node, related temprature sensor and triping
point data for Atlas cpu core found on exynos7 SoC.
Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Adds CAN controller nodes for r8a7795.
Note: CAN channel register base address mentioned in R-Car Gen3 Hardware
User Manual v0.5E is incorrect. The corrected base addresses are:
CAN Channel 0 - 0xe6c30000
CAN Channel 1 - 0xe6c38000
Signed-off-by: Ramesh Shanmugasundaram <ramesh.shanmugasundaram@bp.renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Adds external CAN clock node for r8a7795. This clock can be used as
fCAN clock of CAN and CAN FD controller.
Signed-off-by: Ramesh Shanmugasundaram <ramesh.shanmugasundaram@bp.renesas.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Since 16ccaf5bb5 ("pinctrl: sh-pfc: Accept standard function, pins and
groups properties") renesas pfc drivers accept generic "function", "pins"
and "groups" properties.
This patch updates the kzm9g device tree to use the generic properties.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Only one of "broken-cd" and "non-removable" should be supplied
according to Documentation/devicetree/bindings/mmc/mmc.txt.
Obviously emmc and sdio-wifi are non-removable devices, while
broken-cd is for removable device whose card detect pin is broken.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
This patch fixes the incorrect Over-temperature protection pin.
since the rk3368 io list said the otp pin is gpio0a3.
Anyway, that should be fixed in here.
Signed-off-by: Caesar Wang <wxt@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Here are some final updates for ARM SoC specific dts files:
* The i.MX changes were sent relatively late, and had a dependency
on the clk tree, so I delayed that a bit. Support for the new
i.MX6qp SoC and a couple of new boards is added in this branch.
* Uniphier renames a few files to match the final product names
that were decided by the company, kudos to the kernel developer(s)
for getting support upstream before the product release.
Also two boards are added. The patches were posted early enough
and nice overall, but we forgot to apply them and decided to
give it some more time in linux-next
* at91 has two small bug fixes.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=p5al
-----END PGP SIGNATURE-----
Merge tag 'armsoc-dt2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull more ARM DT changes from Arnd Bergmann:
"Here are some final updates for ARM SoC specific dts files:
- The i.MX changes were sent relatively late, and had a dependency on
the clk tree, so I delayed that a bit. Support for the new i.MX6qp
SoC and a couple of new boards is added in this branch.
- Uniphier renames a few files to match the final product names that
were decided by the company, kudos to the kernel developer(s) for
getting support upstream before the product release. Also two
boards are added. The patches were posted early enough and nice
overall, but we forgot to apply them and decided to give it some
more time in linux-next
- at91 has two small bug fixes"
* tag 'armsoc-dt2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (83 commits)
ARM: dts: at91: sama5d4 Xplained: don't disable hsmci regulator
ARM: dts: at91: sama5d3 Xplained: don't disable hsmci regulator
ARM: dts: uniphier: add pinmux node for I2C ch4
ARM: dts: uniphier: add @{address} to EEPROM node
ARM: dts: uniphier: add PH1-Pro4 Sanji board support
ARM: dts: uniphier: add PH1-Pro4 Ace board support
ARM: dts: uniphier: enable I2C channel 2 of ProXstream2 Gentil board
ARM: dts: uniphier: add EEPROM node for ProXstream2 Gentil board
ARM: dts: uniphier: add reference clock nodes
ARM: dts: uniphier: rework UniPhier System Bus nodes
ARM: dts: uniphier: factor out ranges property of support card
arm64: dts: uniphier: rename PH1-LD10 to PH1-LD20
ARM: dts: imx53-qsb: Fix gpio button polarity
ARM: dts: vfxxx: Add DAC node for Vybrid SoC
ARM: dts: imx6q: add missing links between ipu2 and mipi dsi
ARM: dts: imx: Add support for Advantech/GE B850v3
ARM: dts: imx: Add support for Advantech/GE B650v3
ARM: dts: imx: Add support for Advantech/GE B450v3
ARM: dts: imx: Add support for Advantech/GE Bx50v3
ARM: dts: imx: Add Advantech BA-16 Qseven module
...
This time with:
* Updates for the Exynos IOMMU driver to make use of default
domains and to add support for the SYSMMU v5
* New Mediatek IOMMU driver
* Support for the ARMv7 short descriptor format in the
io-pgtable code
* Default domain support for the ARM SMMU
* Couple of other small fixes all over the place
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=uiAk
-----END PGP SIGNATURE-----
Merge tag 'iommu-updates-v4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull IOMMU updates from Joerg Roedel:
- updates for the Exynos IOMMU driver to make use of default domains
and to add support for the SYSMMU v5
- new Mediatek IOMMU driver
- support for the ARMv7 short descriptor format in the io-pgtable code
- default domain support for the ARM SMMU
- couple of other small fixes all over the place
* tag 'iommu-updates-v4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (41 commits)
iommu/ipmmu-vmsa: Add r8a7795 DT binding
iommu/mediatek: Check for NULL instead of IS_ERR()
iommu/io-pgtable-armv7s: Fix kmem_cache_alloc() flags
iommu/mediatek: Fix handling of of_count_phandle_with_args result
iommu/dma: Fix NEED_SG_DMA_LENGTH dependency
iommu/mediatek: Mark PM functions as __maybe_unused
iommu/mediatek: Select ARM_DMA_USE_IOMMU
iommu/exynos: Use proper readl/writel register interface
iommu/exynos: Pointers are nto physical addresses
dts: mt8173: Add iommu/smi nodes for mt8173
iommu/mediatek: Add mt8173 IOMMU driver
memory: mediatek: Add SMI driver
dt-bindings: mediatek: Add smi dts binding
dt-bindings: iommu: Add binding for mediatek IOMMU
iommu/ipmmu-vmsa: Use ARCH_RENESAS
iommu/exynos: Support multiple attach_device calls
iommu/exynos: Add Maintainers entry for Exynos SYSMMU driver
iommu/exynos: Add support for v5 SYSMMU
iommu/exynos: Update device tree documentation
iommu/exynos: Add support for SYSMMU controller with bogus version reg
...
- Initial support for ARMv8.1 CPU PMUs
- Support for the CPU PMU in Cavium ThunderX
- CPU PMU support for systems running 32-bit Linux in secure mode
- Support for the system PMU in ARM CCI-550 (Cache Coherent Interconnect)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABCgAGBQJW794rAAoJELescNyEwWM0O5IH/0ejoUjip3n4dFZnSzAbQQZe
VxCy3DXW5gS8YaswwX2dFw9K772/BpHlazq8AIJIhaR+b+Zzl5t0iOc12HluDilV
pMvi0JTCxwJhsEiKZnP0cVAU9HM6MAgtMOEegkd/YNESKQey30NeDtIcz/pQfTUV
28AF71+w5VPj/1EpHEEhHQsASRIx7eDbKzThzdlb8PnDS0o23QJhL9HjVTNIAlB8
BGxrUBKtBu0eH2Hx33vNjc7UYx1WZQlCk5cAaXevA8mbFXzYaMQI2Cel2nbNMO9i
eu5zPkDUCG7dq16PxK6IgM4AsDCtmmDuckLdN6UEQWYxkLbb2qHNRKtj0bKB8Sk=
=E4PE
-----END PGP SIGNATURE-----
Merge tag 'arm64-perf' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm[64] perf updates from Will Deacon:
"I have another mixed bag of ARM-related perf patches here.
It's about 25% CPU and 75% interconnect, but with drivers/bus/
languishing without an obvious maintainer or tree, Olof and I agreed
to keep all of these PMU patches together. I suspect a whole load of
code from drivers/bus/arm-* can be moved under drivers/perf/, so
that's on the radar for the future.
Summary:
- Initial support for ARMv8.1 CPU PMUs
- Support for the CPU PMU in Cavium ThunderX
- CPU PMU support for systems running 32-bit Linux in secure mode
- Support for the system PMU in ARM CCI-550 (Cache Coherent Interconnect)"
* tag 'arm64-perf' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (26 commits)
drivers/perf: arm_pmu: avoid NULL dereference when not using devicetree
arm64: perf: Extend ARMV8_EVTYPE_MASK to include PMCR.LC
arm-cci: remove unused variable
arm-cci: don't return value from void function
arm-cci: make private functions static
arm-cci: CoreLink CCI-550 PMU driver
arm-cci500: Rearrange PMU driver for code sharing with CCI-550 PMU
arm-cci: CCI-500: Work around PMU counter writes
arm-cci: Provide hook for writing to PMU counters
arm-cci: Add helper to enable PMU without synchornising counters
arm-cci: Add routines to save/restore all counters
arm-cci: Get the status of a counter
arm-cci: write_counter: Remove redundant check
arm-cci: Delay PMU counter writes to pmu::pmu_enable
arm-cci: Refactor CCI PMU enable/disable methods
arm-cci: Group writes to counter
arm-cci: fix handling cpumask_any_but return value
arm-cci: simplify sysfs attr handling
drivers/perf: arm_pmu: implement CPU_PM notifier
arm64: dts: Add Cavium ThunderX specific PMU
...
The arm64 device tree changes make up an increasing portion of
the overall changes, so they are kept separate from the 32-bit
devicetree changes and from the other arm64 updates.
Newly added SoCs and boards are:
- 96Boards Husky board
- AMD Overdrive board
- Amlogic S905 SoC and related Tronsmart boxes
- Annapurna Labs Alpine family and development board
- Broadcom Vulcan servers
- Broadcom Northstar 2 SoC
- Marvell Armada 3700 family and development board
- Qualcomm MSM8996 SoC
Additional devices are enabled for existing platforms from
Applied Micro, Hisilicon, Mediatek, Qualcomm, and Renesas and
there are a couple of other updates for Rockchip, Xilinx and
NXP/Freescale.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=izw3
-----END PGP SIGNATURE-----
Merge tag 'armsoc-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM 64-bit DT updates from Arnd Bergmann:
"The arm64 device tree changes make up an increasing portion of the
overall changes, so they are kept separate from the 32-bit devicetree
changes and from the other arm64 updates.
Newly added SoCs and boards are:
- 96Boards Husky board
- AMD Overdrive board
- Amlogic S905 SoC and related Tronsmart boxes
- Annapurna Labs Alpine family and development board
- Broadcom Vulcan servers
- Broadcom Northstar 2 SoC
- Marvell Armada 3700 family and development board
- Qualcomm MSM8996 SoC
Additional devices are enabled for existing platforms from Applied
Micro, Hisilicon, Mediatek, Qualcomm, and Renesas and there are a
couple of other updates for Rockchip, Xilinx and NXP/Freescale"
* tag 'armsoc-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (102 commits)
ARM64: dts: amlogic: Add Tronsmart Vega S95 configs
Documentation: devicetree: amlogic: Document Tronsmart Vega S95 boards
ARM64: dts: Prepare configs for Amlogic Meson GXBaby
Documentation: devicetree: amlogic: Document Meson GXBaby
devicetree: bindings: Add vendor prefix for Tronsmart
arm64: dts: qcom: Fix MPP's function used for LED control
arm64: dts: alpine: add the MSIX node in the Alpine v2 dtsi
arm64: dts: add the Alpine v2 EVP
arm64: dts: marvell: re-order Device Tree nodes for Armada AP806
arm64: dts: marvell: update Armada AP806 clock description
arm64: dts: marvell: add Device Tree files for Armada 7K/8K
arm64: dts: apm: Add DT node for X-Gene v2 SLIMpro Mailbox I2C Driver
arm64: dts: apm: Mailbox device tree node for APM X-Gene v2 platform.
arm64: dts: apm: Add DT node for X-Gene v1 SLIMpro Mailbox I2C Driver
arm64: dts: apm: mailbox device tree node for APM X-Gene platform.
arm64: dts: apm: Update GPIO to control power-off on X-Gene v2 platforms
arm64: dts: apm: Update GPIO standby controller DT node for X-Gene v2 platforms
arm64: dts: apm: Update GPIO to control power-off on X-Gene v1 platforms
arm64: dts: salvator-x: enable USB 2.0 Host of channel 1 and 2
arm64: dts: salvator-x: enable usb2_phy of channel 1 and 2
...
These are all the updates to device tree files for 32-bit platforms,
plus a couple of related 64-bit updates:
New SoC support:
- Allwinner A83T
- Axis Artpec-6 SoC
- Mediatek MT7623 SoC
- TI Keystone K2G SoC
- ST Microelectronics stm32f469
New board or machine support:
- ARM Juno R2
- Buffalo Linkstation LS-QVL and LS-GL
- Cubietruck plus
- D-Link DIR-885L
- DT support for ARM RealView PB1176 and PB11MPCore
- Google Nexus 7
- Homlet v2
- Itead Ibox
- Lamobo R1
- LG Optimus Black
- Logicpd dm3730
- Raspberry Pi Model A
Other changes include
- Lots of updates for Qualcomm APQ8064, MSM8974 and others
- Improved support for Nokia N900 and other OMAP machines
- Common clk support for lpc32xx
- HDLCD display on ARM
- Improved stm32f429 support
- Improved Renesas device support, r8a779x and others
- Lots of Rockchip updates
- Samsung cleanups
- ADC support for Atmel SAMA5D2
- BCM2835 (Raspberry Pi) improvements
- Broadcom Northstar Plus enhancements
- OMAP GPMC rework
- Several improvements for Atmel SAMA5D2 / Xplained
- Global change to remove inofficial "arm,amba-bus" compatible string
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=RLUc
-----END PGP SIGNATURE-----
Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM DT updates from Arnd Bergmann:
"These are all the updates to device tree files for 32-bit platforms,
plus a couple of related 64-bit updates:
New SoC support:
- Allwinner A83T
- Axis Artpec-6 SoC
- Mediatek MT7623 SoC
- TI Keystone K2G SoC
- ST Microelectronics stm32f469
New board or machine support:
- ARM Juno R2
- Buffalo Linkstation LS-QVL and LS-GL
- Cubietruck plus
- D-Link DIR-885L
- DT support for ARM RealView PB1176 and PB11MPCore
- Google Nexus 7
- Homlet v2
- Itead Ibox
- Lamobo R1
- LG Optimus Black
- Logicpd dm3730
- Raspberry Pi Model A
Other changes include
- Lots of updates for Qualcomm APQ8064, MSM8974 and others
- Improved support for Nokia N900 and other OMAP machines
- Common clk support for lpc32xx
- HDLCD display on ARM
- Improved stm32f429 support
- Improved Renesas device support, r8a779x and others
- Lots of Rockchip updates
- Samsung cleanups
- ADC support for Atmel SAMA5D2
- BCM2835 (Raspberry Pi) improvements
- Broadcom Northstar Plus enhancements
- OMAP GPMC rework
- Several improvements for Atmel SAMA5D2 / Xplained
- Global change to remove inofficial "arm,amba-bus" compatible
string"
* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (350 commits)
ARM, ARM64: dts: drop "arm,amba-bus" in favor of "simple-bus"
ARM: dts: artpec: dual-license on artpec6.dtsi
ARM: dts: ux500: add synaptics RMI4 for Ux500 TVK DT
arm64: dts: juno/vexpress: fix node name unit-address presence warnings
arm64: dts: foundation-v8: add SBSA Generic Watchdog device node
ARM: dts: at91: sama5d2 Xplained: add leds node
ARM: dts: at91: sama5d2 Xplained: add user push button
ARM: dts: at91: sama5d2 Xplained: set pin muxing for usb gadget and usb host
ARM: dts: stm32f429: Enable Ethernet on Eval board
ARM: dts: omap3-sniper: TWL4030 keypad support
Revert "ARM: dts: DRA7: Add dt nodes for PWMSS"
ARM: dts: dm814x: dra62x: Disable wait pin monitoring for NAND
ARM: dts: dm814x: dra62x: Fix NAND device nodes
ARM: dts: stm32f429: Add Ethernet support
ARM: dts: stm32f429: Add system config bank node
ARM: dts: at91: sama5d2: add nand0 and nfc0 nodes
ARM: dts: at91: sama5d2: add dma properties to UART nodes
ARM: dts: at91: sama5d2 Xplained: Correct the macb irq pinctrl node
ARM: dts: exynos: Don't overheat the Odroid XU3-Lite on high load
ARM: dts: exynos: Add cooling levels for Exynos5422/5800 CPUs
...
Here's our branch of ARM64 contents for this merge window, now
containing all ARM64 changes other than device tree files.
- Various new platforms get added
- Allwinner A64 SoC
- Annapurna Labs Alpine SoCs
- Broadcom Vulcan
- Marvell Armada 3700 SoCs
- Amlogic S905
- Various defconfig changes to enable platform specific drivers
This branch includes the clk git tree to resolve a build-time
dependency.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=fO+Q
-----END PGP SIGNATURE-----
Merge tag 'armsoc-arm64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC 64-bit changes from Arnd Bergmann:
"Here's our branch of ARM64 contents for this merge window, now
containing all ARM64 changes other than device tree files.
- Various new platforms get added:
* Allwinner A64 SoC
* Annapurna Labs Alpine SoCs
* Broadcom Vulcan
* Marvell Armada 3700 SoCs
* Amlogic S905
- Various defconfig changes to enable platform specific drivers
This branch includes the clk git tree to resolve a build-time
dependency"
* tag 'armsoc-arm64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (48 commits)
arm64: defconfig: Increase MMC_BLOCK_MINORS to 16
arm64: defconfig: Add Qualcomm sdhci and restart functionality
ARM64: Enable Amlogic Meson GXBaby platform
arm64: defconfig: Enable Samsung MFD and related configs
arm64: alpine: select the Alpine MSI controller driver
arm64: defconfig: enable the Alpine family
arm64: add Alpine SoC family
arm64: defconfig: Enable exynos thermal config
arm64: add defconfig options for Allwinner SoCs
arm64: defconfig: Enable DesignWare APB GPIO controller
arm64: defconfig: Add Renesas R-Car Gen3 USB 2.0 phy driver support
arm64: EXYNOS: Consolidate ARCH_EXYNOS7 symbol into ARCH_EXYNOS
clk: samsung: Don't build ARMv8 clock drivers on ARMv7
MAINTAINERS: Add entry for Broadcom Vulcan SoC
arm64: cputype info for Broadcom Vulcan
arm64: Broadcom Vulcan support
arm64: defconfig: Add Broadcom Vulcan to defconfig
arm64: update ARCH_MVEBU for Marvell Armada 7K/8K support
Documentation: arm: add Marvell Armada 7K and 8K families
Documentation: arm: add link to Armada 38x Functional Spec
...
Pull networking updates from David Miller:
"Highlights:
1) Support more Realtek wireless chips, from Jes Sorenson.
2) New BPF types for per-cpu hash and arrap maps, from Alexei
Starovoitov.
3) Make several TCP sysctls per-namespace, from Nikolay Borisov.
4) Allow the use of SO_REUSEPORT in order to do per-thread processing
of incoming TCP/UDP connections. The muxing can be done using a
BPF program which hashes the incoming packet. From Craig Gallek.
5) Add a multiplexer for TCP streams, to provide a messaged based
interface. BPF programs can be used to determine the message
boundaries. From Tom Herbert.
6) Add 802.1AE MACSEC support, from Sabrina Dubroca.
7) Avoid factorial complexity when taking down an inetdev interface
with lots of configured addresses. We were doing things like
traversing the entire address less for each address removed, and
flushing the entire netfilter conntrack table for every address as
well.
8) Add and use SKB bulk free infrastructure, from Jesper Brouer.
9) Allow offloading u32 classifiers to hardware, and implement for
ixgbe, from John Fastabend.
10) Allow configuring IRQ coalescing parameters on a per-queue basis,
from Kan Liang.
11) Extend ethtool so that larger link mode masks can be supported.
From David Decotigny.
12) Introduce devlink, which can be used to configure port link types
(ethernet vs Infiniband, etc.), port splitting, and switch device
level attributes as a whole. From Jiri Pirko.
13) Hardware offload support for flower classifiers, from Amir Vadai.
14) Add "Local Checksum Offload". Basically, for a tunneled packet
the checksum of the outer header is 'constant' (because with the
checksum field filled into the inner protocol header, the payload
of the outer frame checksums to 'zero'), and we can take advantage
of that in various ways. From Edward Cree"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1548 commits)
bonding: fix bond_get_stats()
net: bcmgenet: fix dma api length mismatch
net/mlx4_core: Fix backward compatibility on VFs
phy: mdio-thunder: Fix some Kconfig typos
lan78xx: add ndo_get_stats64
lan78xx: handle statistics counter rollover
RDS: TCP: Remove unused constant
RDS: TCP: Add sysctl tunables for sndbuf/rcvbuf on rds-tcp socket
net: smc911x: convert pxa dma to dmaengine
team: remove duplicate set of flag IFF_MULTICAST
bonding: remove duplicate set of flag IFF_MULTICAST
net: fix a comment typo
ethernet: micrel: fix some error codes
ip_tunnels, bpf: define IP_TUNNEL_OPTS_MAX and use it
bpf, dst: add and use dst_tclassid helper
bpf: make skb->tc_classid also readable
net: mvneta: bm: clarify dependencies
cls_bpf: reset class and reuse major in da
ldmvsw: Checkpatch sunvnet.c and sunvnet_common.c
ldmvsw: Add ldmvsw.c driver code
...
During the review process of the UniPhier System Bus driver
(drivers/bus/uniphier.c), the current binding of the System Bus
Controller turned out to be no good. In order to make the driver
really usable, we have to switch over to the new binding defined by
Documentation/devicetree/bindings/bus/uniphier-system-bus.txt.
The old binding will be still supported for a while to keep the
backward compatibility.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This property is used in common by several boards. Move it to the
common place (uniphier-support-card.dtsi). If necessary, each board
can still override the property.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Due to the company's awful projecting, this chip has been renamed to
PH1-LD20. It has not been shipped yet, this change would have no
impact on our customers.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Initial page table creation reworked to avoid breaking large block
mappings (huge pages) into smaller ones. The ARM architecture requires
break-before-make in such cases to avoid TLB conflicts but that's not
always possible on live page tables
- Kernel virtual memory layout: the kernel image is no longer linked to
the bottom of the linear mapping (PAGE_OFFSET) but at the bottom of
the vmalloc space, allowing the kernel to be loaded (nearly) anywhere
in physical RAM
- Kernel ASLR: position independent kernel Image and modules being
randomly mapped in the vmalloc space with the randomness is provided
by UEFI (efi_get_random_bytes() patches merged via the arm64 tree,
acked by Matt Fleming)
- Implement relative exception tables for arm64, required by KASLR
(initial code for ARCH_HAS_RELATIVE_EXTABLE added to lib/extable.c but
actual x86 conversion to deferred to 4.7 because of the merge
dependencies)
- Support for the User Access Override feature of ARMv8.2: this allows
uaccess functions (get_user etc.) to be implemented using LDTR/STTR
instructions. Such instructions, when run by the kernel, perform
unprivileged accesses adding an extra level of protection. The
set_fs() macro is used to "upgrade" such instruction to privileged
accesses via the UAO bit
- Half-precision floating point support (part of ARMv8.2)
- Optimisations for CPUs with or without a hardware prefetcher (using
run-time code patching)
- copy_page performance improvement to deal with 128 bytes at a time
- Sanity checks on the CPU capabilities (via CPUID) to prevent
incompatible secondary CPUs from being brought up (e.g. weird
big.LITTLE configurations)
- valid_user_regs() reworked for better sanity check of the sigcontext
information (restored pstate information)
- ACPI parking protocol implementation
- CONFIG_DEBUG_RODATA enabled by default
- VDSO code marked as read-only
- DEBUG_PAGEALLOC support
- ARCH_HAS_UBSAN_SANITIZE_ALL enabled
- Erratum workaround Cavium ThunderX SoC
- set_pte_at() fix for PROT_NONE mappings
- Code clean-ups
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=/oS+
-----END PGP SIGNATURE-----
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Catalin Marinas:
"Here are the main arm64 updates for 4.6. There are some relatively
intrusive changes to support KASLR, the reworking of the kernel
virtual memory layout and initial page table creation.
Summary:
- Initial page table creation reworked to avoid breaking large block
mappings (huge pages) into smaller ones. The ARM architecture
requires break-before-make in such cases to avoid TLB conflicts but
that's not always possible on live page tables
- Kernel virtual memory layout: the kernel image is no longer linked
to the bottom of the linear mapping (PAGE_OFFSET) but at the bottom
of the vmalloc space, allowing the kernel to be loaded (nearly)
anywhere in physical RAM
- Kernel ASLR: position independent kernel Image and modules being
randomly mapped in the vmalloc space with the randomness is
provided by UEFI (efi_get_random_bytes() patches merged via the
arm64 tree, acked by Matt Fleming)
- Implement relative exception tables for arm64, required by KASLR
(initial code for ARCH_HAS_RELATIVE_EXTABLE added to lib/extable.c
but actual x86 conversion to deferred to 4.7 because of the merge
dependencies)
- Support for the User Access Override feature of ARMv8.2: this
allows uaccess functions (get_user etc.) to be implemented using
LDTR/STTR instructions. Such instructions, when run by the kernel,
perform unprivileged accesses adding an extra level of protection.
The set_fs() macro is used to "upgrade" such instruction to
privileged accesses via the UAO bit
- Half-precision floating point support (part of ARMv8.2)
- Optimisations for CPUs with or without a hardware prefetcher (using
run-time code patching)
- copy_page performance improvement to deal with 128 bytes at a time
- Sanity checks on the CPU capabilities (via CPUID) to prevent
incompatible secondary CPUs from being brought up (e.g. weird
big.LITTLE configurations)
- valid_user_regs() reworked for better sanity check of the
sigcontext information (restored pstate information)
- ACPI parking protocol implementation
- CONFIG_DEBUG_RODATA enabled by default
- VDSO code marked as read-only
- DEBUG_PAGEALLOC support
- ARCH_HAS_UBSAN_SANITIZE_ALL enabled
- Erratum workaround Cavium ThunderX SoC
- set_pte_at() fix for PROT_NONE mappings
- Code clean-ups"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (99 commits)
arm64: kasan: Fix zero shadow mapping overriding kernel image shadow
arm64: kasan: Use actual memory node when populating the kernel image shadow
arm64: Update PTE_RDONLY in set_pte_at() for PROT_NONE permission
arm64: Fix misspellings in comments.
arm64: efi: add missing frame pointer assignment
arm64: make mrs_s prefixing implicit in read_cpuid
arm64: enable CONFIG_DEBUG_RODATA by default
arm64: Rework valid_user_regs
arm64: mm: check at build time that PAGE_OFFSET divides the VA space evenly
arm64: KVM: Move kvm_call_hyp back to its original localtion
arm64: mm: treat memstart_addr as a signed quantity
arm64: mm: list kernel sections in order
arm64: lse: deal with clobbered IP registers after branch via PLT
arm64: mm: dump: Use VA_START directly instead of private LOWEST_ADDR
arm64: kconfig: add submenu for 8.2 architectural features
arm64: kernel: acpi: fix ioremap in ACPI parking protocol cpu_postboot
arm64: Add support for Half precision floating point
arm64: Remove fixmap include fragility
arm64: Add workaround for Cavium erratum 27456
arm64: mm: Mark .rodata as RO
...
Tronsmart Vega S95 Pro, Meta and Telos TV boxes.
- Add new DTS to enable support for the boards
- Add documentation for compatibles and vendor prefix
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABAgAGBQJW3W22AAoJELyGR0S84or4ijgQAMDR2a/sg9b9fzxFD8nH5BMn
HFGgIWc+JDhzUYdslaeBPadDiJGeKysekcs4dvOvtuOpL2bcDIjJSU07XsZavY/0
kUirDCMCDc7S0VSA2r7qgOBspaGWrYgYuc/P6ilwsiD+H7vOQIQkQtEn5wJU+pD5
rpFfg/0OjE27YFDmq+9WfZMf1AzNvkH17XyeozP/gZZa3PWqbdP0nkj0o9JxdTcG
WHwoq43OBOClGzufFWQQEnGzxR0n3hzqfCSU+spSBmoKFhhYqw8xtyIow9FFbMMR
oFQNFTfpVaJm/FqFsqcdplpMYHMUlLjFjWyVJWk48gyvl7mykdWTyHWgN7bETObJ
QKUQVYSzkgeQ4KTYWqfqLsa6PDlzt4zjzLqRzEb/3MvACX+zpFqSBH8rjobG/Her
EcHOE068lHj0bzi8Tohm0YzIvvnJLKeb8n9fJmPSnQzlBdTbKqh3Aps917ZTMbqt
/E2UWT0iSnNG4Ln3UG7rAnbg1xDHXL5YYX/D0r5h5ckD5v+ItsjlG4acehOuNkzb
rFMIoWwzfLFaYqJIjCvi7yNK5IfsppTqWIc/fhmOeXHnS5NtGIcmiQhReh8xac7u
N4Mn9ZP4hT/5xBk3MV/McX/qNdQkUmv9C+Kg7xb4GiqmA3q8TsjOnrYHj2tQxHSl
L1Fz8eeFQSRqWIBC+Y6a
=KmAy
-----END PGP SIGNATURE-----
Merge tag 'for-v4.6/gxbb-dt' of https://github.com/carlocaione/linux-meson into next/dt64
This series adds initial support for the Amlogic S905 based
Tronsmart Vega S95 Pro, Meta and Telos TV boxes.
- Add new DTS to enable support for the boards
- Add documentation for compatibles and vendor prefix
* tag 'for-v4.6/gxbb-dt' of https://github.com/carlocaione/linux-meson:
ARM64: dts: amlogic: Add Tronsmart Vega S95 configs
Documentation: devicetree: amlogic: Document Tronsmart Vega S95 boards
ARM64: dts: Prepare configs for Amlogic Meson GXBaby
Documentation: devicetree: amlogic: Document Meson GXBaby
devicetree: bindings: Add vendor prefix for Tronsmart
Signed-off-by: Olof Johansson <olof@lixom.net>
The compatible string "simple-bus" is well defined in ePAPR, while
I see no documentation for the "arm,amba-bus" arnywhere in ePAPR or
Documentation/devicetree/.
DT is also used by other projects than Linux kernel. It is not a
good idea to rely on such an unofficial binding.
This commit
- replaces "arm,amba-bus" with "simple-bus"
- drops "arm,amba-bus" where it is used along with "simple-bus"
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
1. Add support for SBSA Generic Watchdog on foundation models
2. Fix node name unit-address presence/absence mismatch warnings in
all the device trees
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=uO7I
-----END PGP SIGNATURE-----
Merge tag 'vexpress-for-v4.6/dt-updates-2' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into next/dt
Additional updates for ARM VExpress/Juno platforms
1. Add support for SBSA Generic Watchdog on foundation models
2. Fix node name unit-address presence/absence mismatch warnings in
all the device trees
* tag 'vexpress-for-v4.6/dt-updates-2' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
arm64: dts: juno/vexpress: fix node name unit-address presence warnings
arm64: dts: foundation-v8: add SBSA Generic Watchdog device node
Signed-off-by: Olof Johansson <olof@lixom.net>
1. Remove separate ARCH_EXYNOS7 symbol and consolidate it into
one ARCH_EXYNOS.
This depends on clk tree: removal of last presence of ARCH_EXYNOS7.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=XcED
-----END PGP SIGNATURE-----
Merge tag 'samsung-soc64-4.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/arm64
Samsung Exynos ARM64 improvements for v4.6:
1. Remove separate ARCH_EXYNOS7 symbol and consolidate it into
one ARCH_EXYNOS.
This depends on clk tree: removal of last presence of ARCH_EXYNOS7.
* tag 'samsung-soc64-4.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
arm64: EXYNOS: Consolidate ARCH_EXYNOS7 symbol into ARCH_EXYNOS
clk: samsung: Don't build ARMv8 clock drivers on ARMv7
clk: samsung: Enable COMPILE_TEST for Samsung clocks
clk: Move vendor's Kconfig into CCF menu section
clk: mediatek: Fix memory leak on clock init fail
clk: move the common clock's to_clk_*(_hw) macros to clk-provider.h
clk: xgene: Remove return from void function
clk: xgene: Add SoC and PMD PLL clocks with v2 hardware
Documentation: Update APM X-Gene clock binding for v2 hardware
clk: s2mps11: remove redundant code
clk: s2mps11: remove redundant static variables declaration
clk: s2mps11: allocate only one structure for clock init
clk: s2mps11: merge two for loops in one
clk-divider: make sure read-only dividers do not write to their register
clk: tango4: rename ARCH_TANGOX to ARCH_TANGO
clk: scpi: Fix checking return value of platform_device_register_simple()
clk: mvebu: Mark ioremapped memory as __iomem
Signed-off-by: Olof Johansson <olof@lixom.net>
Add support for the Armada 7K and 8K SoCs and the Armada 8040 DB board
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iEYEABECAAYFAlbQX0wACgkQCwYYjhRyO9V9nwCgqk3LOUVjtyjGxd4YU8iHzEBe
B+oAoKMMiTTb/yqcwMdN+l1B5RMOxW4o
=fs9N
-----END PGP SIGNATURE-----
Merge tag 'mvebu-dt64-4.6-2' of git://git.infradead.org/linux-mvebu into next/dt64
mvebu dt64 for 4.6 (part 2)
Add support for the Armada 7K and 8K SoCs and the Armada 8040 DB board
* tag 'mvebu-dt64-4.6-2' of git://git.infradead.org/linux-mvebu:
arm64: dts: marvell: re-order Device Tree nodes for Armada AP806
arm64: dts: marvell: update Armada AP806 clock description
arm64: dts: marvell: add Device Tree files for Armada 7K/8K
Signed-off-by: Olof Johansson <olof@lixom.net>
Commit fa38a82096a1 ("scripts/dtc: Update to upstream version
53bf130b1cdd") added warnings on node name unit-address presence/absence
mismatch in device trees.
This patch fixes those warning on all the juno/vexpress platforms where
unit-address is present in node name while the reg/ranges property is
not present. It also adds unit-address to all smb bus node.
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
This can be a example of adding SBSA Generic Watchdog device node
into some dts files for the Soc which contains SBSA Generic Watchdog.
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Fu Wei <fu.wei@linaro.org>
[edited subject and moved change to dtsi file]
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Add Device Trees for Tronsmart Vega S95 Pro, Meta and Telos TV boxes.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Carlo Caione <carlo@endlessm.com>
This patch set includes:
+ A change in compatible string of X-Gene v2 SoC
PLL DT node to reflect the v2 hardware
+ Update DT fields for X-Gene v1 and v2 standby
GPIO controllers
+ Update declaration of power button GPIO for
X-Gene v1 and X-Gene v2 platforms
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=ASg+
-----END PGP SIGNATURE-----
Merge tag 'xgene-dts-for-v4.6-part1' of https://github.com/AppliedMicro/xgene-next into next/dt64
Merge "First part of X-Gene DT changes queued for v4.6" from Duc Dang:
This patch set includes:
+ A change in compatible string of X-Gene v2 SoC
PLL DT node to reflect the v2 hardware
+ Update DT fields for X-Gene v1 and v2 standby
GPIO controllers
+ Update declaration of power button GPIO for
X-Gene v1 and X-Gene v2 platforms
* tag 'xgene-dts-for-v4.6-part1' of https://github.com/AppliedMicro/xgene-next:
arm64: dts: apm: Update GPIO to control power-off on X-Gene v2 platforms
arm64: dts: apm: Update GPIO standby controller DT node for X-Gene v2 platforms
arm64: dts: apm: Update GPIO to control power-off on X-Gene v1 platforms
arm64: dts: apm: Update X-Gene standby GPIO controller DTS entries
arm64: dts: apm: Update Merlin DT PCP PLL clock node for v2 hardware
The qcom-spmi-mpp driver is now using string "digital" to denote
old "normal" functionality. Update DTS file.
Also update the powersource.
Signed-off-by: Ivan T. Ivanov <ivan.ivanov@linaro.org>
Merge "Broadcom soc-arm64 changes for 4.6" from Florian Fainelli:
This pull request contains Broadcom ARM64-based SoC/platform changes:
- Anup, Ray and Dhanajay enable COMMON_CLK_IPROC, PINCTRL and GPIOLIB for iProc
SoCs to get the corresponding iProc-based drivers to be available and work
- Zi adds support for Broadcom's Vulcan processor by adding a reference
board Device Tree file along with a config ARCH_VULCAN symbol
- Jayachandran C. adds the Broadcom implementor ID and part ID for the Vulcan
processors
* tag 'arm-soc/for-4.6/soc-arm64' of http://github.com/Broadcom/stblinux:
arm64: cputype info for Broadcom Vulcan
arm64: Broadcom Vulcan support
arm64: Select COMMON_CLK_IPROC, PINCTRL and GPIOLIB for iProc SoCs
Merge "Broadcom devicetree-arm64 changes for 4.6" from Florian Fainelli:
This pull request contains Broadcom ARM64-based SoCs device tree changes:
- Anup adds additional nodes to the Broadcom Northstart 2 Device Trees: SDHCI
(iProc-compatible), ARM SP804 timers, ARM SP805 watchdog
- Anup also adds a binding documentation for the ARM SP805 watchdog since there
was not one in tree before
- Ray adds PCIE root complex nodes to the Northstar 2 Device Tree nodes, using
the iProc-compatible binding
- Jayachandran C. adds binding documentation for the Broadcom Vulcan processors and
reference platforms
* tag 'arm-soc/for-4.6/devicetree-arm64' of http://github.com/Broadcom/stblinux:
dt-bindings: Add documentation for Broadcom Vulcan
arm64: dts: Add PCIe0 and PCIe4 DT nodes for NS2
arm64: dts: Add ARM SP805 watchdog DT node for NS2
dt-bindings: watchdog: Add ARM SP805 DT bindings
arm64: dts: Add ARM SP804 timer DT nodes for NS2
arm64: dts: Add SDHCI DT node for NS2
Following the addition of the Alpine MSIX controller driver, add the
corresponding node in the Alpine v2 device tree.
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: Tsahee Zidenberg <tsahee@annapurnalabs.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Extract clock information from EP108
- Sort GPIO node
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iEYEABECAAYFAlbO/SIACgkQykllyylKDCEL9QCfdcFczSmk3OWvubtp1/d7YoMs
MhoAn33UBIqTGcmYgpRljfhWWStW1eRE
=wlZ0
-----END PGP SIGNATURE-----
Merge tag 'zynqmp-dt-for-4.6' of https://github.com/Xilinx/linux-xlnx into next/dt64
Merge "ARM: Xilinx ZynqMP dt patches for v4.6" from Michal Simek:
- Extract clock information from EP108
- Sort GPIO node
* tag 'zynqmp-dt-for-4.6' of https://github.com/Xilinx/linux-xlnx:
ARM64: zynqmp: Extract clock information from EP108
ARM64: zynqmp: Keep gpio node alphabetically sorted
The DT nodes representing the XOR engines were not placed at the
proper location to comply with the requirement of ordering DT nodes by
their unit address. This commit fixes this mistake.
[gregory.clement@free-electrons.com: Fix commit title by adding ' dts:']
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Following the review from the DT maintainers, the DT binding for the
clocks has changed, and we now use a DFX server node exposing a
syscon, with the clock nodes being subnodes of the DFX server
node. This commit therefore updates the AP806 Device Tree file to use
this new DT binding.
[gregory.clement@free-electrons.com: Fix commit title by adding ' dts:']
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
This commit adds the base Device Tree files for the Armada 7K and 8K
SoCs, as well as the Armada 8040 DB board.
The Armada 7020, 7040 (7K family) and 8020, 8040 (8K family) are
composed of:
- An AP806 block that contains the CPU core and a few basic
peripherals. The AP806 is available in dual core configurations
(used in 7020 and 8020) and quad core configurations (used in 8020
and 8040).
- One or two CP110 blocks that contain all the high-speed interfaces
(SATA, PCIe, Ethernet, etc.). The 7K family chips have one CP110,
and the 8K family chips have two CP110, giving them twice the
number of HW interfaces.
In order to represent this from a Device Tree point of view, this
commit creates the following hierarchy:
* armada-ap806.dtsi - definitions common to dual/quad ap806
* armada-ap806-dual.dtsi - description of the two CPUs
* armada-7020.dtsi - description of the 7020 SoC
* armada-8020.dtsi - description of the 8020 SoC
* armada-ap806-quad.dtsi - description of the four CPUs
* armada-7040.dtsi - description of the 7040 SoC
* armada-7040-db.dts - description of the 7040 board
* armada-8040.dtsi - description of the 8040 SoC
The CP110 blocks are not described yet, and will be part of future
patch series.
[gregory.clement@free-electrons.com: Fix commit title by adding ' dts:']
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
This patch updates gpio-keys node that supports power-off for
X-Gene v2 Merlin board to adapt with new changes in xgene-gpio-sb
driver (to support configuring some GPIO pins as interrupt pins).
Signed-off-by: Quan Nguyen <qnguyen@apm.com>
Signed-off-by: Duc Dang <dhdang@apm.com>
xgene-gpio-sb driver now supports configuring some GPIO pins
as interrupt pins. This patch adds the required fields for GPIO
standby controller DT node of X-Gene v2 platform to work with
this new driver change.
Signed-off-by: Quan Nguyen <qnguyen@apm.com>
Signed-off-by: Duc Dang <dhdang@apm.com>
This patch updates gpio-keys node that supports power-off for
X-Gene v1 Mustang board to adapt with new changes in xgene-gpio-sb
driver (to support configuring some GPIO pins as interrupt pins).
Signed-off-by: Duc Dang <dhdang@apm.com>
We should set SW15 to pin 2-3 side on the board before we use CN9
as USB host or peripheral.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
This board has a MAX3355 chip. However, we cannot use the extcon/max3355
driver because the ID pin doesn't connect to a gpio pin (in other words,
it connects to the SoC specific pin).
And, the phy-rcar-gen3-usb2 driver cannot handle such a chip for now.
So, this patch enables usb2_phy of channel 1 and 2.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Add the exposed SD card slots. The on-board eMMC needs to wait until we
fixed the 8bit support.
Signed-off-by: Ai Kyuse <ai.kyuse.uw@renesas.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Ai Kyuse <ai.kyuse.uw@renesas.com>
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
[wsa: squashed some fixes and added mmc-caps]
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
This patch updates the digital voltage levels from corner values to
microvolts as we are going to use s1 regulator directly for vddcx
instead of s1_corner.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
This patch enables the lpass on DB410C. LPASS is used as cpu dai for
both analog and digital audio.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
This patch adds manual pull up setting for usb otg indicating that the
vbus is vbus is not routed to USB controller/phy therefore enables
pull-up explicitly before starting controller.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
This patch add the iommu/larbs nodes for mt8173
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Daniel Kurtz <djkurtz@chromium.org>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
This patch adds poweroff button device node to support
poweroff feature on hip05 d02 board.
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
There are two dw GPIO controllers in hip05 peri sub, this patch
adds the corresponding device tree nodes.
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
There are four subsystems in hip05 soc, peri/m3/pcie/dsa,
each subsystem has one its, append them under gicv3 node.
They will be used by hisilicon mbigen.
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Instead of using the generic armv8-pmuv3 compatibility, use
the more specific Cortex A57 compatibility.
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
The Hip05 SoC has four L2 cache for all 16 CPUs, every four cpus
share one L2 cache, add them to the dtsi file so that the cache
hierarchy can be probed.
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Device tree part of the Armada 3700 support:
- binding for the Armada 3700 SoCs
- device tree files for the SoCs and a board
- tidy up the Marvell related files
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iEYEABECAAYFAlbEltYACgkQCwYYjhRyO9UZxACgi1NcAIrem831BSMOHVRBphAB
qT8An3bCV/tPx2QYz0kKYmGfyb7VtTzo
=IdEY
-----END PGP SIGNATURE-----
Merge tag 'mvebu-dt64-4.6-1' of git://git.infradead.org/linux-mvebu into next/dt64
mvebu dt64 for 4.6 (part 1)
Device tree part of the Armada 3700 support:
- binding for the Armada 3700 SoCs
- device tree files for the SoCs and a board
- tidy up the Marvell related files
* tag 'mvebu-dt64-4.6-1' of git://git.infradead.org/linux-mvebu:
arm64: dts: add the Marvell Armada 3700 family and a development board
devicetree: bindings: add DT binding for the Marvell Armada 3700 SoC family
Documentation: dt: Tidy up the Marvell related files
Documentation: dt-bindings: Add a new compatible for the Armada 3700
Signed-off-by: Olof Johansson <olof@lixom.net>
The patch adds LS2085a to PCIe compatible to fix the compatibility
issue when using firmware with LS2085a compatible property.
Signed-off-by: Minghuan Lian <minghuan.lian@nxp.com>
Signed-off-by: Mingkai Hu <mingkai.hu@nxp.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
This is a fix-up patch based on the review comment from
Arnd regarding:
* fix ccn504 address in the node name
* remove kcs interrupt-name
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Olof Johansson <olof@lixom.net>
gpio-key,wakeup to the more generic wakeup-source property.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABCAAGBQJWuwVbAAoJEPOmecmc0R2B5b4H/j869d1n99jqv+we15c0B87e
bYjNk9UKW4me+rrpU4PLBVyj15KYj+otAS/aB9S5Z+GckRWHLIB4FppE+cCyqAvb
jmLle+vrMcni23AfbVB9nBzcx/PpE+G0NB9s/PDo07B4MxpeShvYDCW/x3u7ak2r
VotY8hqp3SI7JVXskknmiJtaxA9RI+CpVPucBJ6SZL5CYFgLSYqo0JiW7ArRWoeb
/vdbmMN+9CwbYAaWPzkVgPvCTNqsKJeP3K05u+zxOqV++YIva8H2Ml59euxC3CsY
0IssrCVb0iwlBEF+Lxya/tJJe7lZ5iTcjfE/NMI4lmxvFTUFNMKt8v79kLIKEx0=
=+Sh9
-----END PGP SIGNATURE-----
Merge tag 'v4.6-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt64
Define the tuning-related mmc clocks and move from
gpio-key,wakeup to the more generic wakeup-source property.
* tag 'v4.6-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
arm64: dts: rockchip: replace gpio-key,wakeup with wakeup-source property
arm64: dts: rockchip: add rk3368 tuning clk for emmc and sdmmc
Signed-off-by: Olof Johansson <olof@lixom.net>
1. GICv3 support on Foundation models
2. Support for Juno R2 board
3. Support for ARM HDLCD on all Juno platforms
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=r0q6
-----END PGP SIGNATURE-----
Merge tag 'vexpress-for-v4.6/dt-updates' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into next/dt
Few updates for ARM VExpress/Juno platforms
1. GICv3 support on Foundation models
2. Support for Juno R2 board
3. Support for ARM HDLCD on all Juno platforms
* tag 'vexpress-for-v4.6/dt-updates' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
arm64: dts: Add HDLCD support on Juno platforms
Documentation: drm: Add DT bindings for ARM HDLCD
arm64: dts: Add support for Juno r2 board
arm64: dts: move juno pcie-controller to base file
arm64: dts: add .dts for GICv3 Foundation model
arm64: dts: split Foundation model dts to put the GIC separately
arm64: dts: Foundation model: increase GICC region to allow EOImode=1
arm64: dts: prepare foundation-v8.dts to cope with GICv3
Signed-off-by: Olof Johansson <olof@lixom.net>
Add the RPM Clock Controller DT node and include the necessary header
file for clocks.
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
The #size-cells for the pmics are 0, but we specify a size in the
reg property so that MPP and GPIO modules can figure out how many
pins there are. Now that we've done that by counting irqs, we can
remove the size elements in the reg properties and be DT
compliant.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Acked-by: Andy Gross <andy.gross@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Add #power-domain-cells property for both the gcc and mmcc
clock controller nodes as they both supports power domains (gdsc's)
Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
