leandrof/linux
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
738,332 Commits 2 Branches 0 Tags 5.1 GiB
4bb4aceae9
Commit Graph

12141 Commits

Author SHA1 Message Date
Arnd Bergmann
4bb4aceae9 arm: Xilinx(Zynq and ZynqMP) DT changes for v4.17 
- Use SPDX license identifier
 - Add Xilinx ZynqMP boards
   zcu100-revC, zcu102-revA/revB/rev1.0, zcu104-revA, zcu106-revA,
   zcu111-revA, zc1751 dc1/dc2/dc3/dc4
 - Add Xilinx Zynq boards
   cc108, zc770 dc1/dc2/dc3/dc4
 - Add Digilent Zybo Z7
 - Minor fixes in current DTSes
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iEYEABECAAYFAlqg4+cACgkQykllyylKDCFqOACfbtI4S2j96N3AsHy3sWFUP7li
 XlUAn2bSg/d/x8gSSt5bO2SlGqWkOQxw
 =iZic
 -----END PGP SIGNATURE-----

Merge tag 'xilinx-dt-for-4.17' of https://github.com/Xilinx/linux-xlnx into next/dt

Pull "arm: Xilinx(Zynq and ZynqMP) DT changes for v4.17" from Michal Simek:

- Use SPDX license identifier
- Add Xilinx ZynqMP boards
  zcu100-revC, zcu102-revA/revB/rev1.0, zcu104-revA, zcu106-revA,
  zcu111-revA, zc1751 dc1/dc2/dc3/dc4
- Add Xilinx Zynq boards
  cc108, zc770 dc1/dc2/dc3/dc4
- Add Digilent Zybo Z7
- Minor fixes in current DTSes

* tag 'xilinx-dt-for-4.17' of https://github.com/Xilinx/linux-xlnx: (22 commits)
  arm: dts: zynq: Add Digilent Zybo Z7 board
  arm: zynq: Add support for Xilinx zc770 xm013 dc4 board
  arm: zynq: Add support for Xilinx zc770 xm012 dc3 board
  arm: zynq: Add support for Xilinx zc770 xm011 dc2 board
  arm: zynq: Add support for Xilinx zc770 xm010 dc1 board
  arm: zynq: Add Xilinx cc108 board
  arm: zynq: Add missing address node name in microzed board
  arm: dts: zynq: Use SPDX-License-Identifier
  arm: zynq: Use i2c-mux instead of i2cswitch for pca9548
  arm64: zynqmp: Add support for Xilinx zc1751
  arm64: zynqmp: Add support for Xilinx zc12XX boards
  arm64: zynqmp: Add support for Xilinx zcu111-revA
  arm64: zynqmp: Add support for Xilinx zcu106-revA
  arm64: zynqmp: Add support for Xilinx zcu104-revA
  arm64: zynqmp: Add support for Xilinx zcu102
  arm64: zynqmp: Add support for Xilinx zcu100-revC
  dt-bindings: xilinx: Add description for ZynqMP
  arm64: zynqmp: Add 8-bit bus width property for ep108
  arm64: zynqmp: Added OOB timing settings in zynqmp-ep108.dts
  arm64: zynqmp: Add SPDX license identifier
  ...
 2018-03-12 14:53:21 +01:00
Nobuhiro Iwamatsu
ba5c7a032c arm: dts: zynq: Add Digilent Zybo Z7 board 
This add a DTS for the Digilent Zybo Z7 board.
This board is the successor board of Zybo, these are almost the same except
for ps-clk-frequency specifications.

Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu@cybertrust.co.jp>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
 2018-03-08 08:11:35 +01:00
Michal Simek
73793093ab arm: zynq: Add support for Xilinx zc770 xm013 dc4 board 
zc770 is based board which is extended by FMC/DC cards for SoC
validation. FMCs/DCs are supposed to cover all SoC configurations.
FMC/DC contains can, ethernet, i2c, qspi, spi and uart.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Rob Herring <robh@kernel.org>
 2018-03-08 08:11:14 +01:00
Michal Simek
0d032bb92f arm: zynq: Add support for Xilinx zc770 xm012 dc3 board 
zc770 is based board which is extended by FMC/DC cards for SoC
validation. FMCs/DCs are supposed to cover all SoC configurations.
FMC/DC contains can, 2x i2c, nor flash, spi and uart.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Rob Herring <robh@kernel.org>
 2018-03-08 08:11:12 +01:00
Michal Simek
0d18af0a8f arm: zynq: Add support for Xilinx zc770 xm011 dc2 board 
zc770 is based board which is extended by FMC/DC cards for SoC
validation. FMCs/DCs are supposed to cover all SoC configurations.
FMC/DC contains can, i2c, nand uart, spi and usb.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Rob Herring <robh@kernel.org>
 2018-03-08 08:11:10 +01:00
Michal Simek
eac38299d2 arm: zynq: Add support for Xilinx zc770 xm010 dc1 board 
zc770 is based board which is extended by FMC/DC cards for SoC
validation. FMCs/DCs are supposed to cover all SoC configurations.
FMC/DC contains ethernet port, can, i2c, sd, qspi, spi, uart and usb.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Rob Herring <robh@kernel.org>
 2018-03-08 08:11:09 +01:00
Michal Simek
c7cf9964ba arm: zynq: Add Xilinx cc108 board 
The board contains 7z010 with 512MB memory, ethernet, qspi, uart, usbs
and sd. But board is not supporting booting from sd card.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Rob Herring <robh@kernel.org>
 2018-03-08 08:11:08 +01:00
Michal Simek
e2fc49e198 arm64: zynqmp: Add support for Xilinx zc1751 
Xilinx zc1751 boards is used for silicon validation. Board can be
extended with 5 FMCs/DCs cards to connect various IPs. Describe all
these combinations.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Rob Herring <robh@kernel.org>
 2018-03-08 08:06:53 +01:00
Michal Simek
d665c7435f arm64: zynqmp: Add support for Xilinx zc12XX boards 
These 3 boards requires minimal support to get Linux up and running.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Rob Herring <robh@kernel.org>
 2018-03-08 08:06:51 +01:00
Michal Simek
b8aee0229d arm64: zynqmp: Add support for Xilinx zcu111-revA 
Xilinx zcu111 is a customer board. It is reusing some parts from zcu102.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Rob Herring <robh@kernel.org>
 2018-03-08 08:06:50 +01:00
Michal Simek
9243d4d390 arm64: zynqmp: Add support for Xilinx zcu106-revA 
Xilinx zcu106 is a customer board. It is reusing some parts from zcu102.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Rob Herring <robh@kernel.org>
 2018-03-08 08:06:48 +01:00
Michal Simek
612eac3b72 arm64: zynqmp: Add support for Xilinx zcu104-revA 
Xilinx zcu104 is another customer board. It is sort of zcu102 clone
with some differences.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Rob Herring <robh@kernel.org>
 2018-03-08 08:06:47 +01:00
Michal Simek
ef797b5370 arm64: zynqmp: Add support for Xilinx zcu102 
This patch is adding revA, revB and rev1.0. There are also other
revisions between which should be backward compatible with previous
versions. Unfortunately all revs are still in use.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Rob Herring <robh@kernel.org>
 2018-03-08 08:06:46 +01:00
Michal Simek
5869ba0653 arm64: zynqmp: Add support for Xilinx zcu100-revC 
This board has 2GB of memory, i2c, sd, wifi sdio, spis, uarts, display
port and usbs.
Board is using fixed clocks because clock driver hasn't been merged yet.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Rob Herring <robh@kernel.org>
 2018-03-08 08:06:45 +01:00
Michal Simek
a7a16068ad dt-bindings: xilinx: Add description for ZynqMP 
Record xlnx,zynqmp compatible string.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Rob Herring <robh@kernel.org>
 2018-03-08 08:06:44 +01:00
Arnd Bergmann
e238310c0c Samsung DTS ARM changes for v4.17 
1. Add WiFi to Artik 5 board.
 2. Remove unused samsung_k3pe0e000b memory DTSI.
 3. Add few remaining SPDX license identifiers.
 4. Refactor Exynos4 by using labels for overriding/extending nodes and
    moving respective nodes under the 'soc' node.
 5. Add three new Exynos4412-based boards: GT-I9300 (Samsung Galaxy S3),
    GT-I9305 (Samsung Galaxy S3 LTE) and GT-N7100/N7105 (Samsung Note 2).
    They are based heavily on existing Trats2 board.
 6. Fix PMIC interrupts on Trats board.
 7. Fix IOMMU for GScaler devices on Exynos5250.
 8. Minor fixes in unit addresses pointed by DTC.
 9. Minor cleanups from unused properties and duplicated code.
 -----BEGIN PGP SIGNATURE-----
 
 iQItBAABCAAXBQJantDuEBxrcnprQGtlcm5lbC5vcmcACgkQwTdm5oaLg9ccGw/9
 FO2VrijXXG1H+ZKwMThvax/rbCzs6nt5mFu1pf/goCup/s2VOTQGfKO8q3y4QvZV
 ZEozlHO1K/GymYw3Hknew8QZrdf4Cr4qOepcl+Ix0qjIVaVeeGmv2j4mgSzkaFdn
 IWGjVqod3l/oCN+FPx9+5PTB5M3cMlOmet99sblohnP+IXXEopkAV3+Lxw7gBSsc
 Ucc8g8U1+7eqM9g5MUar4JRHIuFO20x2spuzp+sjCdte3b1hICXhl+MYF+w5gS2G
 6VPGqoS1GX/aQVOw9/13n1XZSUdVPL2p18q0qZRywcXNh0H9YE/aLffC7bSvRPz4
 K7LMzc1VYoyaRAh5JXPUo0yd2vX8BIemVln/WvwXc0jnUuaNIyRzQB2K/AFzvI2N
 GOmouFUqDfLGO/clzM1di4ji81j9RqUqeWjmqCspkaAlUfZeIua+JalLbAJJrYX/
 IXBTT8XCYcsxwLpsnY0y0rC1sNxH7ItReBshNqUNbLy9TT/2JT6ICLq88X+nkOlD
 qbly/DQ7KIxBfkek94rAoQvlNij0uUmCyTP1oMJEU9Ba8cBJdAEMcqi+zSIegTHY
 0nqL7JhpuptEVNTtwlMLM3wlVYnCRDFhBIgMCE6AbIUBsusAqKQIavpmE9hWAa8m
 /VwtMh8tqLJSGAyi1C/6XZjNTc9ORkKDtx+ZDo2a+WY=
 =WjCX
 -----END PGP SIGNATURE-----

Merge tag 'samsung-dt-4.17' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/dt

Pull "Samsung DTS ARM changes for v4.17" from Krzysztof Kozłowski:

1. Add WiFi to Artik 5 board.
2. Remove unused samsung_k3pe0e000b memory DTSI.
3. Add few remaining SPDX license identifiers.
4. Refactor Exynos4 by using labels for overriding/extending nodes and
   moving respective nodes under the 'soc' node.
5. Add three new Exynos4412-based boards: GT-I9300 (Samsung Galaxy S3),
   GT-I9305 (Samsung Galaxy S3 LTE) and GT-N7100/N7105 (Samsung Note 2).
   They are based heavily on existing Trats2 board.
6. Fix PMIC interrupts on Trats board.
7. Fix IOMMU for GScaler devices on Exynos5250.
8. Minor fixes in unit addresses pointed by DTC.
9. Minor cleanups from unused properties and duplicated code.

* tag 'samsung-dt-4.17' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/krzk/linux: (29 commits)
  ARM: dts: exynos: Fix IOMMU support for GScaler devices on Exynos5250
  ARM: dts: exynos: Remove unused bypass-smu property from Xyref5260
  ARM: dts: exynos: Add missing interrupts property to PMIC on Trats board
  ARM: dts: exynos: Fix unit addresses of PDMA nodes in Exynos5410
  ARM: dts: exynos: Fix address of PPMU ACP on Exynos4210
  ARM: dts: exynos: Cleanup power domain nodes in exynos3250.dtsi
  ARM: dts: exynos: Add touchscreen node to Exynos4412 N710x
  ARM: dts: exynos: Add Samsung's Exynos4412-based Midas boards
  ARM: dts: exynos: Split Trats2 DTS in preparation for Midas boards
  ARM: dts: exynos: Remove "cooling-{min|max}-level" for CPU nodes
  dt-bindings: samsung: Document bindings for Midas family boards
  ARM: dts: exynos: Add soc node to exynos4412
  ARM: dts: exynos: Add soc node to exynos4210
  ARM: dts: exynos: Add soc node to exynos4
  ARM: dts: exynos: Add soc node to exynos5440
  ARM: dts: exynos: Use pmu label in exynos4412
  ARM: dts: exynos: Remove duplicated inclusion of syscon restart nodes on Exynos5410
  ARM: dts: exynos: Use label instead of full path in exynos4412-itop-elite
  ARM: dts: exynos: Use labels instead of full paths in exynos4412-trats2
  ARM: dts: exynos: Use label instead of full path in exynos4412-odroid-common
  ...
 2018-03-07 16:36:50 +01:00
Arnd Bergmann
dfbecbc7b6 STM32 DT updates for v4.17, round 1 
Highlights:
 -----------
  -Add support of STM32MP157 MPU and stm32mp157c eval board
  -Add SD supports on F4 and F7 boards
  -Add leds support on stm32f469 and stm32f769 disco boards
  -Add push button support on stm32f469 and stm32f769 disco boards
  -Add EXTI, SPI, RTC, USB HS/FS support on STM32H743 MCU
  -Add RTC and USB OTG HS on stm32f769-disco
  -Use dedicated files for F7 pinctrl
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJanSS0AAoJEH+ayWryHnCFQEMP+wdYhe+zYC3fNNKksZOmTyIz
 fZJCaTbJhczZbpt5aaWJOIGIQC3Cf0UiSTGYV+XHa8bssZ+2WgnPfD0S6Qi2UTVH
 Eym5zIYSBtjzlovS4zk4XBPte41wjGSP3JeKh4s0zE/Qmmhkadb38nNPfT+KTRYX
 sq2o9yt0PreB6VLLRCEK5L5nesBPDL54dxeRRvHByp/Qg3qWgI4WjNpW7E8P65Ek
 9HBPG97UbYlKj9M6aeepyiJSYK8ebGB/G+/IldNTgMautPsu3xmcP2VYia438/cI
 kc76/cm8AUNpJ98rbLMAZqeTqCbDKBnDzPiUXE8lsJaVknhpWhPpx//X1x4yt/+W
 O43mrwaRbfk5+61cRvyqNEqZhB8ECyQpDkqu5aBwn8zKqAtkTUqzkv87uDpaYgT3
 1V1PFiAVqNmMKOBj4JMzyaJLuRkQX6xFoaF0J7luEknkzelwRVLkEeBHBh0irkDO
 yrpzKka+RA0cU7KKA9sMZSR4rU1i/tPjun1sVG05R5pplNWQLIj7Z5A/ZjeKEx+L
 sSaY9RWntGZ9+6n9a2SGHo/FOt3v8Fs7O7UszWs1fZMoxsSSI+v6UZcQyVlhkVwy
 2ttp6eIFAOf7SaQdsrOEI0L9/DB6KR3LSfLu3Yt6XkLnxcDexghvFWp9ahPjCEmZ
 eX4T9gIZ/7S/Ampz3MRR
 =osrs
 -----END PGP SIGNATURE-----

Merge tag 'stm32-dt-for-v4.17-1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into next/dt

Pull "STM32 DT updates for v4.17, round 1" from Alexandre Torgue:

Highlights:
-----------
 -Add support of STM32MP157 MPU and stm32mp157c eval board
 -Add SD supports on F4 and F7 boards
 -Add leds support on stm32f469 and stm32f769 disco boards
 -Add push button support on stm32f469 and stm32f769 disco boards
 -Add EXTI, SPI, RTC, USB HS/FS support on STM32H743 MCU
 -Add RTC and USB OTG HS on stm32f769-disco
 -Use dedicated files for F7 pinctrl

* tag 'stm32-dt-for-v4.17-1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: (34 commits)
  ARM: dts: stm32: Fix sdio2 rcc hard coded value
  dt-bindings: mfd: Add STM32F7 SDMMC2 rcc entry
  ARM: dts: stm32: Enable sdio1 for stm32f769-disco
  ARM: dts: stm32: Enable sdio1 for stm32f746-eval
  ARM: dts: stm32: Enable sdio1 for stm32f746-disco
  ARM: dts: stm32: Add sdio pins definition for stm32f7
  ARM: dts: stm32: add SPI support on STM32H743 SoC
  ARM: dts: stm32: enable RTC on stm32h743i-eval
  ARM: dts: stm32: add RTC support on STM32H743
  ARM: dts: stm32: enable USB OTG HS on stm32h743i-eval
  ARM: dts: stm32: add USB OTG HS and FS support for STM32H743 SoC
  ARM: dts: stm32: enable RTC on stm32f769-disco
  ARM: dts: stm32: enable USB HS on stm32f769-disco
  ARM: dts: stm32: select otg mode for usbotg_hs on stm32746g_eval
  ARM: dts: stm32: add gadget fifo sizes to usbotg_hs on stm32f746
  ARM: dts: stm32: Add push button to stm32f769 Discovery board
  ARM: dts: stm32: Add push button to stm32f469 Discovery board
  ARM: dts: stm32: Add leds support to stm32f769 Discovery board
  ARM: dts: stm32: Add leds support to stm32f469 Discovery board
  ARM: dts: stm32: Fix HSE clock frequency for stm32h743i-disco board
  ...
 2018-03-07 16:34:22 +01:00
Arnd Bergmann
ea99a3546a ARM: Keystone DTS for 4.17 
- Andrew's various DTS warning fixes
  - clock address separator fix
  - EDAC support for EMIF
  - serial dts node unit address format fix
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJaneBhAAoJEHJsHOdBp5c/bckP/AhiGBDwbLIaT+Ch32j7X0Vz
 Z9TCRSIbUxkbFIE/6KVQkHSLWbdhA3POnWZzk41Mh+qCXDlreSZmGYXgQywI6XIA
 MkNLibHSJ6vfXP11L0qsIFvftUJtyK44u9U2MFDBZTmXXCqKbVNAvLT41nVCN7f1
 cjkKG13uTNIRHShY7B4G7wiJ9z/+SiEJab4VGoKULSw9kDTIRskFukX2pAD3732t
 KPysHuSvRp7wlMkAAp9/gM68czA60+VebZRS5eFOKwS7iGkE2fd4nqEF6HT79NgA
 XeNYucc+UudVVqTzP1V1RZlAjIh5AxK/ogTPPcJ04Dh5BRno0VMauoSDNt+aaNKW
 6Xo36sEGBCzbpnGw6Q9r54Fty5N93zw5BW4yHuWLnbVNNB/JVH8OcVGpoJGrEkwv
 HxoXytEgJKtHhRzFexIOqY60l6WFO0zNy1iBK6BvMYPl6Qg+GU7p7wwdIfRyQuYE
 SS5Hq3cnZdrEXFNsTBMsM1eqAsL3+SSWKdYFPSCfFNRe9CTEIGldv4ofaRQh+vvn
 W101lxXwFOHye/9oiOZk5Q60UKbZbNy2Vi+XQA5lxB99qlXA+bGOWdei1j8vj30K
 UY/NRuKc57GWfMWm4gzzPRY30dBtlY9eFcvDADe64N2fx//Yd+Zate/gdZ4Blm3q
 3dWhsuFq9RNhXHCvVKav
 =FCaw
 -----END PGP SIGNATURE-----

Merge tag 'keystone_dts_for_4.17' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone into next/dt

Pull "ARM: Keystone DTS for 4.17" from Santosh Shilimkar:

 - Andrew's various DTS warning fixes
 - clock address separator fix
 - EDAC support for EMIF
 - serial dts node unit address format fix

* tag 'keystone_dts_for_4.17' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone:
  ARM: dts: keystone-k2g: Fix unit-address formatting for serial nodes
  dt-bindings: memory: ti-emif: add edac support under emif
  ARM: dts: keystone-k2e-clocks: Fix missing unit address separator
  ARM: dts: keystone-k2g: Move usb-phy nodes out of soc0
  ARM: dts: keystone-k2g: Move keystone_dsp_gpio to under device-state-control
  ARM: dts: keystone-k2g: Move keystone_irq to under device-state-control
  ARM: dts: keystone-k2hk: Move keystone_dsp_gpio to under device-state-control
  ARM: dts: keystone-k2l: Move keystone_dsp_gpio to under device-state-control
  ARM: dts: keystone-k2e: Move keystone_dsp_gpio to under device-state-control
  ARM: dts: keystone: Move reset-controller to under device-state-control
  ARM: dts: keystone: Move keystone_irq to under device-state-control
 2018-03-07 15:41:43 +01:00
Brendan Higgins
d6bdd009c2 arm: dts: add Nuvoton NPCM750 device tree 
Add a common device tree for all Nuvoton NPCM750 BMCs and a board
specific device tree for the NPCM750 (Poleg) evaluation board.

Signed-off-by: Brendan Higgins <brendanhiggins@google.com>
Reviewed-by: Tomer Maimon <tmaimon77@gmail.com>
Reviewed-by: Avi Fishman <avifishman70@gmail.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Rob Herring <robh@kernel.org>
Tested-by: Tomer Maimon <tmaimon77@gmail.com>
Tested-by: Avi Fishman <avifishman70@gmail.com>
Tested-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
 2018-03-06 18:01:15 +01:00
Tero Kristo
eae3c955bb dt-bindings: memory: ti-emif: add edac support under emif 
Certain revisions of the TI EMIF IP contain ECC support in them. Reflect
this in the DT binding. Also, add interrupts property as a required
property for the emif controller, as all revisions of the emif IP contain
interrupt support; this might remain unused by the kernel driver though.

Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
 2018-03-05 16:18:49 -08:00
Linus Torvalds
ff8d583621 Merge branch 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip 
Pull irq fixlet from Thomas Gleixner:
 "Just a documentation update for the missing device tree property of
  the R-Car M3N interrupt controller"

* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  dt-bindings/irqchip/renesas-irqc: Document R-Car M3-N support
 2018-03-04 11:33:04 -08:00
Linus Torvalds
58bdf601c2 Merge branch 'i2c/for-current-fixed' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux 
Pull i2c fixes from Wolfram Sang:
 "A driver fix and a documentation fix (which makes dependency handling
  for the next cycle easier)"

* 'i2c/for-current-fixed' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: octeon: Prevent error message on bus error
  dt-bindings: at24: sort manufacturers alphabetically
 2018-03-03 14:55:20 -08:00
Geert Uytterhoeven
7998a4ecc6 dt-bindings/irqchip/renesas-irqc: Document R-Car M3-N support 
Document support for the Interrupt Controller for Externel Devices
(INTC-EX) in the Renesas M3-N (r8a77965) SoC.

No driver update is needed.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: devicetree@vger.kernel.org
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: linux-renesas-soc@vger.kernel.org
Cc: Rob Herring <robh+dt@kernel.org>
Link: https://lkml.kernel.org/r/1519658712-22910-1-git-send-email-geert%2Brenesas@glider.be
 2018-02-28 19:55:43 +01:00
Linus Torvalds
e04d368f47 DeviceTree fixes for 4.16: 
- Update i.MX thermal binding example to use current binding, not the
   deprecated one
 
 - Move arm-charlcd to auxdisplay/
 
 - Fix misspelling of "debounce-interval"
 -----BEGIN PGP SIGNATURE-----
 
 iQItBAABCAAXBQJaldxsEBxyb2JoQGtlcm5lbC5vcmcACgkQ+vtdtY28YcPjEhAA
 ondFa99b1Hs8i42r02kc2kgEi2uKVO1LWsOulknCRVz8f8CcSP7yZW15AkNPw4mh
 sm7mzXkT9yDCclrZa1VCwWNU0KkfNoIv1qImH78X4qseRTMdEE+jIicK3B7Tom8R
 HUcopPTxaeCbNcUMD8J5OZaFVlkpZ9xavFqzlcZpnnjgx2YhTGuXES9B9jcDIU01
 A1oYgBWwQgbv4p5W26UlfD7X2pFUytyyoJEolhbYbHEvf+zmCt2xtaKwoxsfQPQ0
 gXmH3L8LSvwkGMvg+hqNZj16b/qPIv4HphAqypoUEgYYvyb6eyyjvyuwPFp8nwaw
 4IGTNR86Yz5/3YwiluM1jZTyZrLE10cmY7lugmdFQdVuvUbBxMdehTMAgz6wlBxN
 j/q0y7UgTw722rvPjBiApP+PAYDIoJSxxBqIHnFdFXBBbgUzn8zup48pn+uya/Zz
 TiFNx6GtHYop6k3MpbjjJkL9PoL7rRQ7mZprUSrC+qKfapejQGF1bzUzVfbUe/7F
 rRBfdQcamsytMO19JZMfl2fG5GuSKbgAr0jrcjSsy3clUUAmKDwWJafkjSEz1S4v
 3SJD2/Pka/Mrmu0wpH30/UMXibbbjeVxpPxyiWFaOqXkrp4SfR24qwvAGYkn5wEd
 Kh26yy9A6Fkk91905K/lRfo9b6HNKRtUfQ9O45prGWQ=
 =ia73
 -----END PGP SIGNATURE-----

Merge tag 'devicetree-fixes-for-4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux

Pull DeviceTree fixes from Rob Herring:

 - update i.MX thermal binding example to use current binding, not the
   deprecated one

 - move arm-charlcd to auxdisplay/

 - fix misspelling of "debounce-interval"

* tag 'devicetree-fixes-for-4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  dt-bindings: power: Fix "debounce-interval" property misspelling
  auxdisplay: Move arm-charlcd binding to correct folder
  dt-bindings: thermal: imx: update the binding to new method
 2018-02-28 10:39:43 -08:00
Peter Rosin
377999caf7 dt-bindings: at24: sort manufacturers alphabetically 
Makes them easier to find.

Signed-off-by: Peter Rosin <peda@axentia.se>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
 2018-02-28 09:56:23 +01:00
Ludovic Barre
e51acdb030 dt-bindings: stm32: add support of STM32MP157 
This patch adds STM32MP157 SoC bindings.

Signed-off-by: Ludovic Barre <ludovic.barre@st.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
 2018-02-27 11:56:12 +01:00
Geert Uytterhoeven
d40ade43e3 dt-bindings: power: Fix "debounce-interval" property misspelling 
"debounce_interval" was never supported.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Rob Herring <robh@kernel.org>
 2018-02-18 21:05:43 -06:00
Alexandre Torgue
1bdd335fa6 dt-bindings: pinctrl: Add st,stm32f769-pinctrl compatible to stm32-pinctrl 
Add new compatible for stm32f769 MCU.

Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Reviewed-by: Rob Herring <robh@kernel.org>
 2018-02-16 18:05:44 +01:00
Simon Shields
bd010d6066 dt-bindings: samsung: Document bindings for Midas family boards 
Document GT-I9300, GT-I9305, GT-N7100, and GT-N7105 bindings, along
with the shared "midas" binding.

Signed-off-by: Simon Shields <simon@lineageos.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
 2018-02-13 19:06:27 +01:00
Linus Torvalds
61f14c015f MIPS changes for 4.16-rc2 
A single change (and associated DT binding update) to allow the address
 of the MIPS Cluster Power Controller (CPC) to be chosen by DT, which
 allows SMP to work on generic MIPS kernels where the bootloader hasn't
 configured the CPC address (i.e. the new Ranchu platform).
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEd80NauSabkiESfLYbAtpk944dnoFAlqCxagACgkQbAtpk944
 dnqc5g//Ss6wWO2hgUtzUTEwPgmCLANG1cVvykI0a1rROzdnEUI8CRUoiRlD0A0B
 gxpDZKNXWkpZ1veL7XuwKjFLk1tW7a/MNB/nxIPhruGRl1uBH8BOo3OXYE/ZzvKl
 74kN55Ykz4sltlyuTSSG/6e41ysXkSB4xJdTb/hx6jPOVwFM4RoOFODmhRYf5mKO
 p9N9ZYpqC07IYL6upRqEhEG1LePio3aVx66ngq+d+8SOISMP3puXf5TkvRFkkCfz
 OSPsvDtbsm8tf1yM4vvw7PNK4JsuS+OjbDMaLZXZFy+OBMAb0VJ2ZCG9OM5Chkvc
 Dqkb5Ds0pB0kYGHL8bh726q5NmcIVfKT5k0XRyz5a3weHdSbCn5/pHPg5uxtvlDP
 xt2i6k3HJjoMb5FmbhObROf6O904d5vi4u0E17EefWOwEaDn23PruzqUDqAGgq4g
 k84hXuVSZd/Ymu/9Lh+KYlhyiqCKcReleIRzg+ySU5bmXZR8izkiTdU1NIXRH4mg
 4xi7SV/tygACd0cu42CF6b5lOWIGBZZ5qtyI93cfWRCngL2LT0rYfCNg+IuuK9eb
 hZ2YZ7AjqUWYMPQgxHJ6rPLslY9/LDiW3OrtL7/3gEQyC3D41XYSIFThMO+DDC5c
 Ok6nJNxnEE3AvqE5iHjr/PA3GRx6bUmv/2Ty+DzDqWnO7Gayxls=
 =E7mu
 -----END PGP SIGNATURE-----

Merge tag 'mips_4.16_2' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/mips

Pull MIPS fix from James Hogan:
 "A single change (and associated DT binding update) to allow the
  address of the MIPS Cluster Power Controller (CPC) to be chosen by DT,
  which allows SMP to work on generic MIPS kernels where the bootloader
  hasn't configured the CPC address (i.e. the new Ranchu platform)"

* tag 'mips_4.16_2' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/mips:
  MIPS: CPC: Map registers using DT in mips_cpc_default_phys_base()
  dt-bindings: Document mti,mips-cpc binding
 2018-02-13 09:35:17 -08:00
Andy Shevchenko
b4bf200bc0 auxdisplay: Move arm-charlcd binding to correct folder 
This is a follow up to the commit

  00846a4425 ("auxdisplay: Move arm-charlcd.c to drivers/auxdisplay folder")

for Device Tree binding.

No functional change.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rob Herring <robh@kernel.org>
 2018-02-12 08:41:38 -06:00
Dong Aisheng
2623ab651f dt-bindings: thermal: imx: update the binding to new method 
Due to the old method has already been marked as deprecated in binding
doc, so obviously it's better to update the example to new bindings
as well.

Cc: Shawn Guo <shawn.guo@linaro.org>
Cc: Leonard Crestez <leonard.crestez@nxp.com>
Cc: Zhang Rui <rui.zhang@intel.com>
Cc: Eduardo Valentin <edubezval@gmail.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
 2018-02-12 08:39:50 -06:00
Linus Torvalds
ef9417e8a9 IOMMU Updates for Linux v4.16 
Including:
 
 	- 5-level page-table support for the Intel IOMMU.
 
 	- Error reporting improvements for the AMD IOMMU driver
 
 	- Additional DT bindings for ipmmu-vmsa (Renesas)
 
 	- Smaller fixes and cleanups
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABAgAGBQJafGLMAAoJECvwRC2XARrjPTUP/0g/n8H5j35DevM56G62MrNq
 fNweMxPm7AqZQR/dnIkPnlH5NWfP1z5PZ47H/nAMAqd7cKHVOfUmzoufiUSGP92V
 eweFF4ufjqA+V5fluGcnt0UNxgbEGs+cEgf9jbEkUlpmFisV7BwOCGIJbVdHMrxG
 jkrr/L17iX82uqIru9JmfB2K0pEPBtBHQSZpooGHAyGsR4xU6nX1X64mV/a9Oh/2
 qzfzRsAbF5ZtAszktVz9j2AMfp40BrrAcHzmvepjS5yTjlH9t5J8UdM48GHWU+Zp
 ptmlJ3fJybe0yUI6GDfG9M6+/RX0T/xMvV1QcSJW6KP0q/i9p4hrIQufoOzstMYM
 uCsFPlhMLFSDcQy6CZ3M6VEsU5mdJ0KMn0xAN8rBLAok1ScGKrlP5qWpXJLeUJRp
 Ie7R4WVT+Ly/SLppoiLagiTW3ZD/gQh+YPNgYwXptMdDmiqSRdXm0nF6bzTiKk1Z
 8h8oEj2ittwBTC+fXuP+1C/wOKYL6KJUGnykLcHBDO+/wkEWOP0KM6939+T7IjHt
 zkiUapRegRvWyDOq1HFVl0tBCRLo1dqwG/3PFpqHUkj6Iyqyhd8y/V5IM3GTSI+d
 1tHBz6dXin62N/xYu/ScpmPMerpjP/AtMqd3dvx7Q+9vgNIAVSPMKFqeXhQ3P2ph
 +p1CdWvPYPb7wUhTvcja
 =+LFh
 -----END PGP SIGNATURE-----

Merge tag 'iommu-updates-v4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu

Pull IOMMU updates from Joerg Roedel:
 "This time there are not a lot of changes coming from the IOMMU side.

  That is partly because I returned from my parental leave late in the
  development process and probably partly because everyone was busy with
  Spectre and Meltdown mitigation work and didn't find the time for
  IOMMU work. So here are the few changes that queued up for this merge
  window:

   - 5-level page-table support for the Intel IOMMU.

   - error reporting improvements for the AMD IOMMU driver

   - additional DT bindings for ipmmu-vmsa (Renesas)

   - small fixes and cleanups"

* tag 'iommu-updates-v4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
  iommu: Clean up of_iommu_init_fn
  iommu/ipmmu-vmsa: Remove redundant of_iommu_init_fn hook
  iommu/msm: Claim bus ops on probe
  iommu/vt-d: Enable 5-level paging mode in the PASID entry
  iommu/vt-d: Add a check for 5-level paging support
  iommu/vt-d: Add a check for 1GB page support
  iommu/vt-d: Enable upto 57 bits of domain address width
  iommu/vt-d: Use domain instead of cache fetching
  iommu/exynos: Don't unconditionally steal bus ops
  iommu/omap: Fix debugfs_create_*() usage
  iommu/vt-d: clean up pr_irq if request_threaded_irq fails
  iommu: Check the result of iommu_group_get() for NULL
  iommu/ipmmu-vmsa: Add r8a779(70|95) DT bindings
  iommu/ipmmu-vmsa: Add r8a7796 DT binding
  iommu/amd: Set the device table entry PPR bit for IOMMU V2 devices
  iommu/amd - Record more information about unknown events
 2018-02-08 12:03:54 -08:00
Paul Burton
aece34cd57
dt-bindings: Document mti,mips-cpc binding 
Document a binding for the MIPS Cluster Power Controller (CPC) that
allows the device tree to specify where the CPC registers are located.

Signed-off-by: Paul Burton <paul.burton@mips.com>
Signed-off-by: Aleksandar Markovic <aleksandar.markovic@mips.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Cc: linux-mips@linux-mips.org
Cc: devicetree@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/18512/
Signed-off-by: James Hogan <jhogan@kernel.org>
 2018-02-08 14:02:01 +00:00
Linus Torvalds
7e6127c124 linux-watchdog 4.16-rc1 merge window tag 
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.14 (GNU/Linux)
 
 iEYEABECAAYFAlp4I7MACgkQ+iyteGJfRsp34QCgi3O78Sajso9iJNMj5KJsQTEt
 VOsAn1ioW2jO9CmZQoj4IlVStlKU0NCN
 =jeHv
 -----END PGP SIGNATURE-----

Merge tag 'linux-watchdog-4.16-rc1' of git://www.linux-watchdog.org/linux-watchdog

Pull watchdog updates from Wim Van Sebroeck:

 - new watchdog device drivers for Realtek RTD1295 and Spreadtrum SC9860
   platform

 - add support for the following devices: jz4780 SoC, AST25xx series SoC
   and r8a77970 SoC

 - convert to watchdog framework: i6300esb_wdt, xen_wdt and sp5100_tco

 - several fixes for watchdog core

 - remove at32ap700x and obsolete documentation

 - gpio: Convert to use GPIO descriptors

 - rename gemini into FTWDT010 as this IP block is generc from Faraday
   Technology

 - various clean-ups and small bugfixes

 - add Guenter Roeck as co-maintainer

 - change maintainers e-mail address

* tag 'linux-watchdog-4.16-rc1' of git://www.linux-watchdog.org/linux-watchdog: (74 commits)
  documentation: watchdog: remove documentation of w83697hf_wdt/w83697ug_wdt
  documentation: watchdog: remove documentation for ixp2000
  documentation: watchdog: remove documentation of at32ap700x_wdt
  watchdog: remove at32ap700x_wdt
  watchdog: sp5100_tco: Add support for recent FCH versions
  watchdog: sp5100-tco: Abort if watchdog is disabled by hardware
  watchdog: sp5100_tco: Use bit operations
  watchdog: sp5100_tco: Convert to use watchdog subsystem
  watchdog: sp5100_tco: Clean up function and variable names
  watchdog: sp5100_tco: Use dev_ print functions where possible
  watchdog: sp5100_tco: Match PCI device early
  watchdog: sp5100_tco: Clean up sp5100_tco_setupdevice
  watchdog: sp5100_tco: Use standard error codes
  watchdog: sp5100_tco: Use request_muxed_region where possible
  watchdog: sp5100_tco: Fix watchdog disable bit
  watchdog: sp5100_tco: Always use SP5100_IO_PM_{INDEX_REG,DATA_REG}
  watchdog: core: make sure the watchdog_worker is not deferred
  watchdog: mt7621: switch to using managed devm_watchdog_register_device()
  watchdog: mt7621: set WDOG_HW_RUNNING bit when appropriate
  watchdog: imx2_wdt: restore previous timeout after suspend+resume
  ...
 2018-02-07 11:54:34 -08:00
Linus Torvalds
8578953687 MIPS changes for 4.16 
These are the main MIPS changes for 4.16. Rough overview:
  - Basic support for the Ingenic JZ4770 based GCW Zero open-source
    handheld video game console
  - Support for the Ranchu board (used by Android emulator)
  - Various cleanups and misc improvements
 
 Fixes:
  - Fix generic platform's USB_*HCI_BIG_ENDIAN selects (4.9)
  - Fix vmlinuz default build when ZBOOT selected
  - Fix clean up of vmlinuz targets
  - Fix command line duplication (in preparation for Ingenic JZ4770)
 
 Miscellaneous:
  - Allow Processor ID reads to be to be optimised away by the compiler
    (improves performance when running in guest)
  - Push ARCH_MIGHT_HAVE_PC_SERIO/PARPORT down to platform level to
    disable on generic platform with Ranchu board support
  - Add helpers for assembler macro instructions for older assemblers
  - Use assembler macro instructions to support VZ, XPA & MSA operations
    on older assemblers, removing C wrapper duplication
  - Various improvements to VZ & XPA assembly wrappers
  - Add drivers/platform/mips/ to MIPS MAINTAINERS entry
 
 Minor cleanups:
  - Misc FPU emulation cleanups (removal of unnecessary include, moving
    macros to common header, checkpatch and sparse fixes)
  - Remove duplicate assignment of core in play_dead()
  - Remove duplication in watchpoint handling
  - Remove mips_dma_mapping_error() stub
  - Use NULL instead of 0 in prepare_ftrace_return()
  - Use proper kernel-doc Return keyword for
    __compute_return_epc_for_insn()
  - Remove duplicate semicolon in csum_fold()
 
 Platform support:
 
 Broadcom:
  - Enable ZBOOT on BCM47xx
 
 Generic platform:
  - Add Ranchu board support, used by Android emulator
  - Fix machine compatible string matching for Ranchu
  - Support GIC in EIC mode
 
 Ingenic platforms:
  - Add DT, defconfig and other support for JZ4770 SoC and GCW Zero
  - Support dynamnic machine types (i.e. JZ4740 / JZ4770 / JZ4780)
  - Add Ingenic JZ4770 CGU clocks
  - General Ingenic clk changes to prepare for JZ4770 SoC support
  - Use common command line handling code
  - Add DT vendor prefix to GCW (Game Consoles Worldwide)
 
 Loongson:
  - Add MAINTAINERS entry for Loongson2 and Loongson3 platforms
  - Drop 32-bit support for Loongson 2E/2F devices
  - Fix build failures due to multiple use of "MEM_RESERVED"
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEd80NauSabkiESfLYbAtpk944dnoFAlp64ZUACgkQbAtpk944
 dnrXrg//UPWeZMye/uHw0eEeJJjybyA0IWpJ6M94gbHxpduhQsjYU3CR9U4ZBmhs
 feY53dahh0RCR0k28EF8DEPkoUbGFKmyYCnvqAuatq1XOjAZtlgS9+VVzbK+Iswm
 XkZD1MBoZ49o0meyjQrH/2Ri/t6tHuzo0G2WtRJ8FnVruN9ymG6D5pR4Y31gDucb
 6JkTXjNfRJIKd0qJgP+c3HdlKE7jlnCTJnzHdA+5FbZVwKbm2/6KxbQo5Gc1BXJX
 4j7I4nJ0FIz0cB6fHbcccFSW9w3lPa9bQ4XpYPJYE6a36QldFvMWHRxvI6rxrACN
 5mPqIB9uqvtW8sdUbJtNRXFlNnm8XZzvsNqP6WxGQPW70+q2camni9W/gC1ifQsF
 +uVV54yj3Ky8xQNbbpfbDp/tFXRuLtj3DV4/a3dwA5J0YGEuMn1zzV5WTTzymFVn
 3NKl62LDUlzBNw0d1lUPMY6P1oKcNnRhLxBq0cxaB7AdOLF0jlCQ/wYUhXPpblj6
 CQB4cupR4IMvL7FZ1RS98e1RHaF8mXpaZBnGXT251DxZEre9OXCJxDdzqemedTVi
 SaCcvQqApCQD8OihL+wHZLew8Vp4EvwGAa++Evu/Ot4rWjY/9MGLtewYk8jkOEf6
 qk30dDn86ou29HNwpzfWadIq5Zew+QftifGOzTcuzgrJXXt+jH8=
 =7iwT
 -----END PGP SIGNATURE-----

Merge tag 'mips_4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/mips

Pull MIPS updates from James Hogan:
 "These are the main MIPS changes for 4.16.

  Rough overview:

   (1) Basic support for the Ingenic JZ4770 based GCW Zero open-source
       handheld video game console

   (2) Support for the Ranchu board (used by Android emulator)

   (3) Various cleanups and misc improvements

  More detailed summary:

  Fixes:
   - Fix generic platform's USB_*HCI_BIG_ENDIAN selects (4.9)
   - Fix vmlinuz default build when ZBOOT selected
   - Fix clean up of vmlinuz targets
   - Fix command line duplication (in preparation for Ingenic JZ4770)

  Miscellaneous:
   - Allow Processor ID reads to be to be optimised away by the compiler
     (improves performance when running in guest)
   - Push ARCH_MIGHT_HAVE_PC_SERIO/PARPORT down to platform level to
     disable on generic platform with Ranchu board support
   - Add helpers for assembler macro instructions for older assemblers
   - Use assembler macro instructions to support VZ, XPA & MSA
     operations on older assemblers, removing C wrapper duplication
   - Various improvements to VZ & XPA assembly wrappers
   - Add drivers/platform/mips/ to MIPS MAINTAINERS entry

  Minor cleanups:
   - Misc FPU emulation cleanups (removal of unnecessary include, moving
     macros to common header, checkpatch and sparse fixes)
   - Remove duplicate assignment of core in play_dead()
   - Remove duplication in watchpoint handling
   - Remove mips_dma_mapping_error() stub
   - Use NULL instead of 0 in prepare_ftrace_return()
   - Use proper kernel-doc Return keyword for
     __compute_return_epc_for_insn()
   - Remove duplicate semicolon in csum_fold()

  Platform support:

  Broadcom:
   - Enable ZBOOT on BCM47xx

  Generic platform:
   - Add Ranchu board support, used by Android emulator
   - Fix machine compatible string matching for Ranchu
   - Support GIC in EIC mode

  Ingenic platforms:
   - Add DT, defconfig and other support for JZ4770 SoC and GCW Zero
   - Support dynamnic machine types (i.e. JZ4740 / JZ4770 / JZ4780)
   - Add Ingenic JZ4770 CGU clocks
   - General Ingenic clk changes to prepare for JZ4770 SoC support
   - Use common command line handling code
   - Add DT vendor prefix to GCW (Game Consoles Worldwide)

  Loongson:
   - Add MAINTAINERS entry for Loongson2 and Loongson3 platforms
   - Drop 32-bit support for Loongson 2E/2F devices
   - Fix build failures due to multiple use of 'MEM_RESERVED'"

* tag 'mips_4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/mips: (53 commits)
  MIPS: Malta: Sanitize mouse and keyboard configuration.
  MIPS: Update defconfigs after previous patch.
  MIPS: Push ARCH_MIGHT_HAVE_PC_SERIO down to platform level
  MIPS: Push ARCH_MIGHT_HAVE_PC_PARPORT down to platform level
  MIPS: SMP-CPS: Remove duplicate assignment of core in play_dead
  MIPS: Generic: Support GIC in EIC mode
  MIPS: generic: Fix Makefile alignment
  MIPS: generic: Fix ranchu_of_match[] termination
  MIPS: generic: Fix machine compatible matching
  MIPS: Loongson fix name confict - MEM_RESERVED
  MIPS: bcm47xx: enable ZBOOT support
  MIPS: Fix trailing semicolon
  MIPS: Watch: Avoid duplication of bits in mips_read_watch_registers
  MIPS: Watch: Avoid duplication of bits in mips_install_watch_registers.
  MIPS: MSA: Update helpers to use new asm macros
  MIPS: XPA: Standardise readx/writex accessors
  MIPS: XPA: Allow use of $0 (zero) to MTHC0
  MIPS: XPA: Use XPA instructions in assembly
  MIPS: VZ: Pass GC0 register names in $n format
  MIPS: VZ: Update helpers to use new asm macros
  ...
 2018-02-07 11:22:44 -08:00
Linus Torvalds
3f551e3cef Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux 
Pull thermal management updates from Zhang Rui:

 - fix a race condition issue in power allocator governor (Yi Zeng).

 - add support for AP806 and CP110 in armada thermal driver, together
   with several improvements (Baruch Siach, Miquel Raynal)

 - add support for r8z7743 in rcar thermal driver (Biju Das)

 - convert thermal core to use new hwmon API to avoid warning (Fabio
   Estevam)

 - small fixes and cleanups in thermal core and x86_pkg_thermal,
   int3400_thermal, hisi_thermal, mtk_thermal and imx_thermal drivers
   (Pravin Shedge, Geert Uytterhoeven, Alexey Khoroshilov, Brian Bian,
   Matthias Brugger, Nicolin Chen, Uwe Kleine-König)

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: (25 commits)
  thermal: thermal_hwmon: Convert to hwmon_device_register_with_info()
  thermal/x86 pkg temp: Remove debugfs_create_u32() casts
  thermal: int3400_thermal: fix error handling in int3400_thermal_probe()
  thermal/drivers/hisi: Remove bogus const from function return type
  thermal: armada: Give meaningful names to the thermal zones
  thermal: armada: Wait sensors validity before exiting the init callback
  thermal: armada: Change sensors trim default value
  thermal: armada: Update Kconfig and module description
  thermal: armada: Add support for Armada CP110
  thermal: armada: Add support for Armada AP806
  thermal: armada: Use real status register name
  thermal: armada: Clarify control registers accesses
  thermal: armada: Simplify the check of the validity bit
  thermal: armada: Use msleep for long delays
  dt-bindings: thermal: Describe Armada AP806 and CP110
  dt-bindings: thermal: rcar: Add device tree support for r8a7743
  thermal: mtk: Cleanup unused defines
  thermal: imx: update to new formula according to NXP AN5215
  thermal: imx: use consistent style to write temperatures
  thermal: imx: improve comments describing algorithm for temp calculation
  ...
 2018-02-06 15:04:58 -08:00
Linus Torvalds
68c5735eaa media updates for v4.16-rc1 
-----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJacX62AAoJEAhfPr2O5OEVjKYP/R3v+c8ztiHzaeibcZZ8IFNl
 58E0Y0yGa8OpoGJx9uqtEOamQmZoHhACfId7joIp/Jv38bgWAdbxOmk3Y4FDCFqG
 1bRrpnnmvlfabiMMfLpURLqKhf7rJMtErZkrnmmqg9P/lEMohaZUJAsgBZNfJM8l
 fZeacSnCSpzlxVcUb9Bf4vWhLk39R+xFzvFrwzbVUIHf3bDVpf4S4kNorMkhSZSF
 HaISYXqVMhpKca7CngVKytbfacUStUY01cXcjdMuB/sD7ySwdtKogbPMvrOSaexz
 G/8MB+sGT1JKUgIlh6Qv8hX805KuxBgfP19XSOH46nNU8KbYegdGhN5QXlokwI1m
 dAOiozkU93r5yBZl6QzkN3uwXe492PoLgczifg97pzAJP0BfWeFStkYqlugLTwwC
 Slmr7g3FZVJajbPl6WyioAGW7xfqBF7ftScZOHYxmhy41CWCGKJctmsJOjncyz5O
 GInEIP3KR4CgjR+iM1LoKvE+OvVo4kRc7hrcUsjQNsbfBn6xiixjwH+5M+UVvezA
 6UQpmtWGg4pX1djb8j8f6mKF8KZM12Pp3jb4Rl1cLsytN5BOBKaMEKdV3rgL+19P
 Yo0x/1wK/unkI20Om71vYyQ0nXVF9j7Tpeij5u0M57TeTVYCwloQgHmrcvQJdo8+
 Pqw5XEUiDpAIjvKp0XGh
 =H9AS
 -----END PGP SIGNATURE-----

Merge tag 'media/v4.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media

Pull media updates from Mauro Carvalho Chehab:

 - videobuf2 was moved to a media/common dir, as it is now used by the
   DVB subsystem too

 - Digital TV core memory mapped support interface

 - new sensor driver: ov7740

 - several improvements at ddbridge driver

 - new V4L2 driver: IPU3 CIO2 CSI-2 receiver unit, found on some Intel
   SoCs

 - new tuner driver: tda18250

 - finally got rid of all LIRC staging drivers

 - as we don't have old lirc drivers anymore, restruct the lirc device
   code

 - add support for UVC metadata

 - add a new staging driver for NVIDIA Tegra Video Decoder Engine

 - DVB kAPI headers moved to include/media

 - synchronize the kAPI and uAPI for the DVB subsystem, removing the gap
   for non-legacy APIs

 - reduce the kAPI gap for V4L2

 - lots of other driver enhancements, cleanups, etc.

* tag 'media/v4.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (407 commits)
  media: v4l2-compat-ioctl32.c: make ctrl_is_pointer work for subdevs
  media: v4l2-compat-ioctl32.c: refactor compat ioctl32 logic
  media: v4l2-compat-ioctl32.c: don't copy back the result for certain errors
  media: v4l2-compat-ioctl32.c: drop pr_info for unknown buffer type
  media: v4l2-compat-ioctl32.c: copy clip list in put_v4l2_window32
  media: v4l2-compat-ioctl32.c: fix ctrl_is_pointer
  media: v4l2-compat-ioctl32.c: copy m.userptr in put_v4l2_plane32
  media: v4l2-compat-ioctl32.c: avoid sizeof(type)
  media: v4l2-compat-ioctl32.c: move 'helper' functions to __get/put_v4l2_format32
  media: v4l2-compat-ioctl32.c: fix the indentation
  media: v4l2-compat-ioctl32.c: add missing VIDIOC_PREPARE_BUF
  media: v4l2-ioctl.c: don't copy back the result for -ENOTTY
  media: v4l2-ioctl.c: use check_fmt for enum/g/s/try_fmt
  media: vivid: fix module load error when enabling fb and no_error_inj=1
  media: dvb_demux: improve debug messages
  media: dvb_demux: Better handle discontinuity errors
  media: cxusb, dib0700: ignore XC2028_I2C_FLUSH
  media: ts2020: avoid integer overflows on 32 bit machines
  media: i2c: ov7740: use gpio/consumer.h instead of gpio.h
  media: entity: Add a nop variant of media_entity_cleanup
  ...
 2018-02-06 11:27:48 -08:00
Linus Torvalds
105cf3c8c6 pci-v4.16-changes 
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJad5lgAAoJEFmIoMA60/r8s2kQAI3PztawDpaCP9Z12pkbBHSt
 Ho0xTyk9rCZi9kQJbNjc+a+QrlA3QmTHXIXerB3LSWoh7M+XhsECjem92eHpgLNS
 JvYPhTfOrCr0vdiAmOz6hD0AqN/psrbfzgiJhSwomsGEFS77k7kERSJckRv81sxb
 Aj5F/WjucAgLorwm4auveAJEQ7atE7/6pkXzoqYm4G6NLOb46jUcRGndrnvXZBlz
 fws8fBM4BHyi7i25CYQl24tFq1CGax1rIPgLg+4KnH76bQk/N6Ju0sGVSzfh+hG8
 SIerK9bJbzGRAuNKoxB3aO1dyzsK3x9WztE2mG98w5trOISPIR1FqnvC/225FWAU
 d6eIXiC7wKnEx+DElNTzCjzfHc7SAJoupO32H7CoiTe5zPUlWlxJ1zLYkK1gt50q
 m8PRBiYTglxyznzrO0drtcdjEzvbdZNRrsYnul4wi1vSHzjk6F6XLtzT10XWM1M1
 1pXLB8384FTj0Hu4bq6Y3Aivkmz0Sf+eQM2NaOwe+Zj7/1VV0d3lvi4LUXkqzLCA
 FoXPJSMxG2Qu+iflCeYRQBJjExaZH3eNLZ3dT6QpcJrjaFVedd9u5DeeFqNL27zV
 bhr8TdqrR4p4rc8EBAGoCapw96IxLZROKB3gxbrZVOpfIZpzthwHbElHX6aqUgF4
 w/EV1JWs36WXWaxFk8wd
 =ttq9
 -----END PGP SIGNATURE-----

Merge tag 'pci-v4.16-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

Pull PCI updates from Bjorn Helgaas:

 - skip AER driver error recovery callbacks for correctable errors
   reported via ACPI APEI, as we already do for errors reported via the
   native path (Tyler Baicar)

 - fix DPC shared interrupt handling (Alex Williamson)

 - print full DPC interrupt number (Keith Busch)

 - enable DPC only if AER is available (Keith Busch)

 - simplify DPC code (Bjorn Helgaas)

 - calculate ASPM L1 substate parameter instead of hardcoding it (Bjorn
   Helgaas)

 - enable Latency Tolerance Reporting for ASPM L1 substates (Bjorn
   Helgaas)

 - move ASPM internal interfaces out of public header (Bjorn Helgaas)

 - allow hot-removal of VGA devices (Mika Westerberg)

 - speed up unplug and shutdown by assuming Thunderbolt controllers
   don't support Command Completed events (Lukas Wunner)

 - add AtomicOps support for GPU and Infiniband drivers (Felix Kuehling,
   Jay Cornwall)

 - expose "ari_enabled" in sysfs to help NIC naming (Stuart Hayes)

 - clean up PCI DMA interface usage (Christoph Hellwig)

 - remove PCI pool API (replaced with DMA pool) (Romain Perier)

 - deprecate pci_get_bus_and_slot(), which assumed PCI domain 0 (Sinan
   Kaya)

 - move DT PCI code from drivers/of/ to drivers/pci/ (Rob Herring)

 - add PCI-specific wrappers for dev_info(), etc (Frederick Lawler)

 - remove warnings on sysfs mmap failure (Bjorn Helgaas)

 - quiet ROM validation messages (Alex Deucher)

 - remove redundant memory alloc failure messages (Markus Elfring)

 - fill in types for compile-time VGA and other I/O port resources
   (Bjorn Helgaas)

 - make "pci=pcie_scan_all" work for Root Ports as well as Downstream
   Ports to help AmigaOne X1000 (Bjorn Helgaas)

 - add SPDX tags to all PCI files (Bjorn Helgaas)

 - quirk Marvell 9128 DMA aliases (Alex Williamson)

 - quirk broken INTx disable on Ceton InfiniTV4 (Bjorn Helgaas)

 - fix CONFIG_PCI=n build by adding dummy pci_irqd_intx_xlate() (Niklas
   Cassel)

 - use DMA API to get MSI address for DesignWare IP (Niklas Cassel)

 - fix endpoint-mode DMA mask configuration (Kishon Vijay Abraham I)

 - fix ARTPEC-6 incorrect IS_ERR() usage (Wei Yongjun)

 - add support for ARTPEC-7 SoC (Niklas Cassel)

 - add endpoint-mode support for ARTPEC (Niklas Cassel)

 - add Cadence PCIe host and endpoint controller driver (Cyrille
   Pitchen)

 - handle multiple INTx status bits being set in dra7xx (Vignesh R)

 - translate dra7xx hwirq range to fix INTD handling (Vignesh R)

 - remove deprecated Exynos PHY initialization code (Jaehoon Chung)

 - fix MSI erratum workaround for HiSilicon Hip06/Hip07 (Dongdong Liu)

 - fix NULL pointer dereference in iProc BCMA driver (Ray Jui)

 - fix Keystone interrupt-controller-node lookup (Johan Hovold)

 - constify qcom driver structures (Julia Lawall)

 - rework Tegra config space mapping to increase space available for
   endpoints (Vidya Sagar)

 - simplify Tegra driver by using bus->sysdata (Manikanta Maddireddy)

 - remove PCI_REASSIGN_ALL_BUS usage on Tegra (Manikanta Maddireddy)

 - add support for Global Fabric Manager Server (GFMS) event to
   Microsemi Switchtec switch driver (Logan Gunthorpe)

 - add IDs for Switchtec PSX 24xG3 and PSX 48xG3 (Kelvin Cao)

* tag 'pci-v4.16-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (140 commits)
  PCI: cadence: Add EndPoint Controller driver for Cadence PCIe controller
  dt-bindings: PCI: cadence: Add DT bindings for Cadence PCIe endpoint controller
  PCI: endpoint: Fix EPF device name to support multi-function devices
  PCI: endpoint: Add the function number as argument to EPC ops
  PCI: cadence: Add host driver for Cadence PCIe controller
  dt-bindings: PCI: cadence: Add DT bindings for Cadence PCIe host controller
  PCI: Add vendor ID for Cadence
  PCI: Add generic function to probe PCI host controllers
  PCI: generic: fix missing call of pci_free_resource_list()
  PCI: OF: Add generic function to parse and allocate PCI resources
  PCI: Regroup all PCI related entries into drivers/pci/Makefile
  PCI/DPC: Reformat DPC register definitions
  PCI/DPC: Add and use DPC Status register field definitions
  PCI/DPC: Squash dpc_rp_pio_get_info() into dpc_process_rp_pio_error()
  PCI/DPC: Remove unnecessary RP PIO register structs
  PCI/DPC: Push dpc->rp_pio_status assignment into dpc_rp_pio_get_info()
  PCI/DPC: Squash dpc_rp_pio_print_error() into dpc_rp_pio_get_info()
  PCI/DPC: Make RP PIO log size check more generic
  PCI/DPC: Rename local "status" to "dpc_status"
  PCI/DPC: Squash dpc_rp_pio_print_tlp_header() into dpc_rp_pio_print_error()
  ...
 2018-02-06 09:59:40 -08:00
Linus Torvalds
20f9aa2213 pwm: Changes for v4.16-rc1 
The Meson PWM controller driver gains support for the AXG series and a
 minor bug is fixed for the STMPE driver.
 
 To round things off, the class is now set for PWM channels exported via
 sysfs which allows non-root access, provided that the system has been
 configured accordingly.
 -----BEGIN PGP SIGNATURE-----
 
 iQJNBAABCAA3FiEEiOrDCAFJzPfAjcif3SOs138+s6EFAlp4VVMZHHRoaWVycnku
 cmVkaW5nQGdtYWlsLmNvbQAKCRDdI6zXfz6zoQaND/kBLRg76Y4FVncBVIXiMP3V
 043L4OG4BhkjyNomIsf4hI0Z6QXREEmm6TnhxNVMdW7zyXJshBQR534W/TYFpaAJ
 hMn8t5F9XS8uw8DETI24BTuuThjE5GkuWVxQojKgxxv5QI4OqML9eChFubVNV6De
 MqDRHyLPjYYGa7LLgA5a/BwpISvnZbiOwkQWMGQAxC4P4N0cS3mSq/h93HypnRYv
 IGiFeYWh4PnZvNRfYoQPktXOt3fc/x4DATjnCPUYhd2IkD0mflvae4qvUyC8gea+
 s9ujvcQtCIl4zaGCV3ufMxMkSHoDuFDb5rqpEPx7N2GI0VfWVz14xr0J4pQ6I0yo
 aWRVs2MUSOa32LKCv5Ly2+V/7ChBkyQIrr+/fDlEhMLk/Usf4b+hvBTmzycW6okA
 zvr5IpJ8TOOAJdoTUZZvY96ZL8oqq4m4AOPmv99Q3d40SM7PwJUjQTZ6d/hmhs4k
 xyO/BCHKlbO5Pw2CvNG5gDSEdOZJC2TJnJHP5pql6Ek7mT3uslfy851dpj8iK5aQ
 rp69Qm9Kn8fA76+mg2aW4cmH7mHitN/ExtwFEmgKxAC+WH6RXk0nMWKTGKsaGVLf
 lEl2K5089a62179lO/Rb4XwgUP7tvX2gIWutN8UjngQDpVn5kJdl7aR+ITFsD6fE
 Xd5VymGZB+KlF1tk3sQ93A==
 =TnjC
 -----END PGP SIGNATURE-----

Merge tag 'pwm/for-4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm

Pull pwm updates from Thierry Reding:
 "The Meson PWM controller driver gains support for the AXG series and a
  minor bug is fixed for the STMPE driver.

  To round things off, the class is now set for PWM channels exported
  via sysfs which allows non-root access, provided that the system has
  been configured accordingly"

* tag 'pwm/for-4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm:
  pwm: meson: Add clock source configuration for Meson-AXG
  dt-bindings: pwm: Update bindings for the Meson-AXG
  pwm: stmpe: Fix wrong register offset for hwpwm=2 case
  pwm: Set class for exported channels in sysfs
 2018-02-05 09:44:52 -08:00
Linus Torvalds
8ac4840a3c Misc driver changes only : 
- TI-MsgMgr: Fix print format for a printk
 - TI-MSgMgr: SPDX license switch for the driver
 - QCOM-IPC: Convert driver to use regmap
 - QCOM-IPC: Spawn sibling clock device from mailbox driver
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJadq9yAAoJEH/ZZH/HmD+VupMP/2WiPSo8mP4Pdb5TvlHDZQA2
 e99YCwxGgvwIs5i9TmTNz4jyrXZa36S+m/LYvuBrKncjPl0BHQVpKa/vFM4NJOw5
 evlMgB+c8wdAbIQtP3w3f72TClpIutKdsWA+wTxH4221TLFRmpptj/tY5JHEezFw
 KrIKhesYUTjulNTrA+rGe3e/xso8f2P8OfQAtK8k+nVrqp6Wnu/IeXftLkMuRAR8
 tSzz2CTIMC1iBFGZn6TRXLn1qe6rnO8uZrN4DmJGMe/dudQ8hjRzb2zx9bDOhtG3
 uLcD2ETsZNS0g6rJP0iltIz3FdZEqS5gugOIIQ+b6opZ2rNkSWlkQLCTnwqLWZ3w
 eLqBbRumb0+kDfdTheBijUjd+NJupR8/zEkSxWx2VUwP4zRzrgvmdqyfghAQD2jv
 lLjQHmG6JBO/NTwgQ9WgSO7Noem7tfeIu+jdS4robihk7x2/TrdRFvfTayndWy9Q
 6mRAKgk3ElL83VeyfVZF9jSOqu/SwemUYw4+wSnAS1u+SL6Am/U5HXTggLclqM9o
 ETkR+5aL6RYA1ik/vRIhV9TvoT7Ew4GKRI1etBvh0gkSlJ9PgRUNL7IS+yUdBMYX
 btD79ZIM6VjGWxVx80aDhTfYndcDPokvBYxD39vezy5w9SqEZzMSm1oO6zkO4X9p
 ry3ZToIwhuXKBtE8hkIX
 =SEiX
 -----END PGP SIGNATURE-----

Merge tag 'mailbox-v4.16' of git://git.linaro.org/landing-teams/working/fujitsu/integration

Pull mailbox updates from Jassi Brar:
 "Misc driver changes only:

   - TI-MsgMgr: Fix print format for a printk

   - TI-MSgMgr: SPDX license switch for the driver

   - QCOM-IPC: Convert driver to use regmap

   - QCOM-IPC: Spawn sibling clock device from mailbox driver"

* tag 'mailbox-v4.16' of git://git.linaro.org/landing-teams/working/fujitsu/integration:
  dt-bindings: mailbox: qcom: Document the APCS clock binding
  mailbox: qcom: Create APCS child device for clock controller
  mailbox: qcom: Convert APCS IPC driver to use regmap
  mailbox: ti-msgmgr: Use %zu for size_t print format
  mailbox: ti-msgmgr: Switch to SPDX Licensing
 2018-02-04 11:11:23 -08:00
Linus Torvalds
4141cf676b Merge branch 'i2c/for-4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux 
Pull i2c updates from Wolfram Sang:
 "I2C has the following changes for you:

   - new flag to mark DMA safe buffers in i2c_msg. Also, some
     infrastructure around it. And docs.

   - huge refactoring of the at24 driver led by the new maintainer
     Bartosz

   - update I2C bus recovery to send STOP after recovery

   - conversion from gpio to gpiod for I2C bus recovery

   - adding a fault-injector to the i2c-gpio driver

   - lots of small driver improvements, and bigger ones to
     i2c-sh_mobile"

* 'i2c/for-4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (99 commits)
  i2c: mv64xxx: Add myself as maintainer for this driver
  i2c: mv64xxx: Fix clock resource by adding an optional bus clock
  i2c: mv64xxx: Remove useless test before clk_disable_unprepare
  i2c: mxs: use true and false for boolean values
  i2c: meson: update doc description to fix build warnings
  i2c: meson: add configurable divider factors
  dt-bindings: i2c: update documentation for the Meson-AXG
  i2c: imx-lpi2c: add runtime pm support
  i2c: rcar: fix some trivial typos in comments
  i2c: davinci: fix the cpufreq transition
  i2c: rk3x: add proper kerneldoc header
  i2c: rk3x: account for const type of of_device_id.data
  i2c: acorn: remove outdated path from file header
  i2c: acorn: add MODULE_LICENSE tag
  i2c: rcar: implement bus recovery
  i2c: send STOP after successful bus recovery
  i2c: ensure SDA is released in recovery if SDA is controllable
  i2c: add 'set_sda' to bus_recovery_info
  i2c: add identifier in declarations for i2c_bus_recovery
  i2c: make kerneldoc about bus recovery more precise
  ...
 2018-02-04 10:57:43 -08:00
Georgi Djakov
0ae7d327a6 dt-bindings: mailbox: qcom: Document the APCS clock binding 
Update the binding documentation for APCS to mention that the APCS
hardware block also expose a clock controller functionality.

The APCS clock controller is a mux and half-integer divider. It has the
main CPU PLL as an input and provides the clock for the application CPU.

Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
 2018-02-04 12:16:34 +05:30
Linus Torvalds
ef991796be This is the bulk of pin control changes for the v4.16 kernel cycle: 
Core changes:
 
 - After lengthy discussions and partly due to my ignorance, we have
   merged a patch making pinctrl_force_default() and pinctrl_force_sleep()
   reprogram the states into the hardware of any hogged pins, even
   if they are already in the desired state. This only apply to hogged
   pins since groups of pins owned by drivers need to be managed by
   each driver, lest they could not do things like runtime PM and
   put pins to sleeping state even if the system as a whole is not
   in sleep.
 
 New drivers:
 
 - New driver for the Microsemi Ocelot SoC. This is used in ethernet
   switches.
 
 - The X-Powers AXP209 GPIO driver was extended to also deal with pin
   control and moved over from the GPIO subsystem. This circuit is
   a mixed-mode integrated circuit which is part of AllWinner designs.
 
 - New subdriver for the Qualcomm MSM8998 SoC, core of a high end
   mobile devices (phones) chipset.
 
 - New subdriver for the ST Microelectronics STM32MP157 MPU and
   STM32F769 MCU from the STM32 family.
 
 - New subdriver for the MediaTek MT7622 SoC. This is used for routers,
   repeater, gateways and such network infrastructure.
 
 - New subdriver for the NXP (former Freescale) i.MX 6ULL. This SoC has
   multimedia features and target "smart devices", I guess in-car
   entertainment, in-flight entertainment, industrial control panels etc.
 
 General improvements:
 
 - Incremental improvements on the SH-PFC subdrivers for things like
   the CAN bus.
 
 - Enable the glitch filter on Baytrail GPIOs used for interrupts.
 
 - Proper handling of pins to GPIO ranges on the Semtec SX150X
 
 - An IRQ setup ordering fix on MCP23S08.
 
 - A good set of janitorial coding style fixes.
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJadGEKAAoJEEEQszewGV1zA4QQALs8edxhv4qV5vm50mTdrO3n
 QtRhJNb53j6MIKtjFnazMvh6MXRIP+08SyX9sDLi5AxINIVuyQh3mrcB6Zc9zN58
 +6jFFOIbfm5E8by4n3wnKm3F/WAbNBZph9eT2Rn3cDv9o9hQbyNJ50sQkQMCjd9X
 WGR353c3OL4zb3vU8t72G/RPYUY1w1SkG9bGzRuSif8LawDcN6v6MMo2XhZA6RqM
 3qYIG29vJ1n0weggUIBeSAJIzk4eMwcoWCbVWxhns5JGxw5VPES1zbSp1D+mbzRC
 01i5Pt/gD+cWN/Kk/zKIMo1OqLAl+uLr6hzepj6W+5wu9CcQz/BgvRx7HUqnqgyh
 S8cN4AOgWmW+T75pHypd1WVic3q0RCXkFY8jjHpCATDY+Z+js0lZRs3y4DBiJ2ys
 DMVBeumDINKqaZ6aLH6lVkm+SxXOUy143arQQIzi0/F7fAp68i+9ofIO8B5smEmd
 0S+3sT0sO5QXVgZJ0t0iGUUG5irXi8XtF5qvRmuFZUe0OLGgKX20oCdC0pH0WU4M
 OZO1Bvb8vmn1tddogO2WlHeg6amWdwxtDuBsLRO3YILLu3jwPjhNqNmErXzXEmWt
 TY9l2M1uQmoJibNpmTjOzSfj4OtUHMwkDrFRJHAcUPcKwdEy4MyzFL16ATnIwgY9
 AmyMLNWJd8Wazgc6BK6w
 =gLY/
 -----END PGP SIGNATURE-----

Merge tag 'pinctrl-v4.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

Pull pin control updates from Linus Walleij:
 "This is the bulk of pin control changes for the v4.16 kernel cycle.
  Like with GPIO it is actually a bit calm this time.

  Core changes:

   - After lengthy discussions and partly due to my ignorance, we have
     merged a patch making pinctrl_force_default() and
     pinctrl_force_sleep() reprogram the states into the hardware of any
     hogged pins, even if they are already in the desired state.

     This only apply to hogged pins since groups of pins owned by
     drivers need to be managed by each driver, lest they could not do
     things like runtime PM and put pins to sleeping state even if the
     system as a whole is not in sleep.

  New drivers:

   - New driver for the Microsemi Ocelot SoC. This is used in ethernet
     switches.

   - The X-Powers AXP209 GPIO driver was extended to also deal with pin
     control and moved over from the GPIO subsystem. This circuit is a
     mixed-mode integrated circuit which is part of AllWinner designs.

   - New subdriver for the Qualcomm MSM8998 SoC, core of a high end
     mobile devices (phones) chipset.

   - New subdriver for the ST Microelectronics STM32MP157 MPU and
     STM32F769 MCU from the STM32 family.

   - New subdriver for the MediaTek MT7622 SoC. This is used for
     routers, repeater, gateways and such network infrastructure.

   - New subdriver for the NXP (former Freescale) i.MX 6ULL. This SoC
     has multimedia features and target "smart devices", I guess in-car
     entertainment, in-flight entertainment, industrial control panels
     etc.

  General improvements:

   - Incremental improvements on the SH-PFC subdrivers for things like
     the CAN bus.

   - Enable the glitch filter on Baytrail GPIOs used for interrupts.

   - Proper handling of pins to GPIO ranges on the Semtec SX150X

   - An IRQ setup ordering fix on MCP23S08.

   - A good set of janitorial coding style fixes"

* tag 'pinctrl-v4.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (102 commits)
  pinctrl: mcp23s08: fix irq setup order
  pinctrl: Forward declare struct device
  pinctrl: sunxi: Use of_clk_get_parent_count() instead of open coding
  pinctrl: stm32: add STM32F769 MCU support
  pinctrl: sx150x: Add a static gpio/pinctrl pin range mapping
  pinctrl: sx150x: Register pinctrl before adding the gpiochip
  pinctrl: sx150x: Unregister the pinctrl on release
  pinctrl: ingenic: Remove redundant dev_err call in ingenic_pinctrl_probe()
  pinctrl: sprd: Use seq_putc() in sprd_pinconf_group_dbg_show()
  pinctrl: pinmux: Use seq_putc() in pinmux_pins_show()
  pinctrl: abx500: Use seq_putc() in abx500_gpio_dbg_show()
  pinctrl: mediatek: mt7622: align error handling of mtk_hw_get_value call
  pinctrl: mediatek: mt7622: fix potential uninitialized value being returned
  pinctrl: uniphier: refactor drive strength get/set functions
  pinctrl: imx7ulp: constify struct imx_cfg_params_decode
  pinctrl: imx: constify struct imx_pinctrl_soc_info
  pinctrl: imx7d: simplify imx7d_pinctrl_probe
  pinctrl: imx: use struct imx_pinctrl_soc_info as a const
  pinctrl: sunxi-pinctrl: fix pin funtion can not be match correctly.
  pinctrl: qcom: Add msm8998 pinctrl driver
  ...
 2018-02-02 14:22:53 -08:00
Linus Torvalds
bf644990a7 RTC for 4.16 
Subsystem:
  - Move ABI documentation to Documentation/ABI
 
 New driver:
  - NXP i.MX53 SRTC
  - Chrome OS EC RTC
 
 Drivers:
  - Remove at32ap700x
  - Many fixes in various error paths
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEXx9Viay1+e7J/aM4AyWl4gNJNJIFAlp0P/wACgkQAyWl4gNJ
 NJLKnQ/+N2b1O5urndPRbxxFOYixNtsNUav7nqslsewWtKJ0q+vSlzkiFXPWIIqm
 7KFoMtp3ZnV30t4QkB3A2SHjIJxo2vSwSkEld6ZpMMaMA2ZRo710eNg7oJanwArG
 3aE6aNY24X/8/fc4zBeNxdeE8wWHYZU40tdkoHctUQSfyb2K2gGQD+/mjJV11Q/s
 +ULx3bqcjnfMWDn5MKMyoxIZiAKwrljtc9dhdK03aVvgCic7cApPHV4W4ksFPGJR
 GuTo/TrKUELi2GxZpbLtoX03K7+NM5nlLeCIBmPKmmCvO60Ie1hGIoaOn5F3jkSR
 8/1OlkUuN3HCn0L67jKH9ujt+NvZnUzl1AEtzN5nx435Ikt7GJGqJyHbljmoNfnw
 LhfZVYhD1y5v0SsJ4lG0KYVL57elTCLQqqnqiLSGBjNsYOOceM7iwwxrMCIMvnHA
 NWSqDMWmJvEl4jRK1Rm0z867JYUW4EN+43YnkMZt8D61LQrYRa5A9s0FRqzfrHjz
 bQgR2KcYPGiHvAJ/D97BUpKbEk4bwrU+Y6gaHyWl1v1uGysP9nA7fCpMbkSov2GA
 04od8FIyiDhpKEmZQapfXLqokgiuDN9Wt5IczVQ3ZgOAZCvneFAojxLwyLqJ0+3D
 xu1wOVrQx3UilA59QqWCC2EiyVWDLEtrnSXjYJCPy/QSfaH7uOI=
 =TjE4
 -----END PGP SIGNATURE-----

Merge tag 'rtc-4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux

Pull RTC updates from Alexandre Belloni:
 "Not much this cycle. I've pushed the at32ap700x removal late but it is
  unlikely to cause any issues.

  Summary:

  Subsystem:
   - Move ABI documentation to Documentation/ABI

  New driver:
   - NXP i.MX53 SRTC
   - Chrome OS EC RTC

  Drivers:
   - Remove at32ap700x
   - Many fixes in various error paths"

* tag 'rtc-4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
  rtc: remove rtc-at32ap700x
  Documentation: rtc: move iotcl interface documentation to ABI
  Documentation: rtc: add sysfs file permissions
  Documentation: rtc: move sysfs documentation to ABI
  rtc: mxc_v2: remove __exit annotation
  rtc: mxc_v2: Remove unnecessary platform_get_resource() error check
  rtc: add mxc driver for i.MX53 SRTC
  dt-bindings: rtc: add bindings for i.MX53 SRTC
  rtc: r7301: Fix a possible sleep-in-atomic bug in rtc7301_set_time
  rtc: r7301: Fix a possible sleep-in-atomic bug in rtc7301_read_time
  rtc: omap: fix unbalanced clk_prepare_enable/clk_disable_unprepare
  rtc: ac100: Fix multiple race conditions
  rtc: sun6i: ensure rtc is kfree'd on error
  rtc: cros-ec: add cros-ec-rtc driver.
  mfd: cros_ec: Introduce RTC commands and events definitions.
  rtc: stm32: Fix copyright
  rtc: Remove unused RTC_DEVICE_NAME_SIZE
  rtc: r9701: Remove r9701_remove function
  rtc: brcmstb-waketimer: fix error handling in brcmstb_waketmr_probe()
 2018-02-02 14:19:19 -08:00
Linus Torvalds
4bf772b146 drm/graphics pull request for v4.16-rc1 
-----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJacnVwAAoJEAx081l5xIa+HhIP/0yDg5tuco0QN3YskE/bIa3o
 4VDWsLi+WCoSZoV4uWLKYK8OHiNzKdnGfNoUNWqRqaYilWDtpgBX86Wjg5hxnGwA
 /6jGfU1nhb0teG9clGBbzgxHXW6iKvT+p/Pp1pC8HXU+zEUaungJcWY120hITwMD
 NqUGK6kYRsJVYj+4b+5Ho7Fvv912bbjK0YAptD6RdzX4rDPN0D+XrtXlYsg1PJYx
 jv/NNWEP5mCesYKsS8JzHYcfOF/vdQpPwAV4C3LKaQy5k3pVVIDOEuOycIZTKMf3
 K/fSsbvhHMH3Ck+lPcK+etcoQbkLCcmKbw+3uvM/7njkn7Dp24Ryk9FXB3dXXOgb
 3kLs7f0gY9j/NAi3uKAMvACPvXNA7eptIvAmN/VKzmEiqgx+l0sveSuU73DVoe/x
 Jko8ijyiKchcN+/CTgZ7FNyEd0UWO06+9B0RMrlEezE8f14EhR51wIQQTNFJRJn/
 kqRM1hC2Cvb00vAwq7jjZcDa7hRCI0OoVU9N37smtPuTJY94tR/CUbq10g4pSlu8
 h8FiHnLuhlyh1DQNNS19HQfOSh0yYgEGRQcIKy3vqshsO3/hbe8bQD5UerqMZPZB
 ZpMEWe5VHSWIVjAxgzHNXFd9F/jSeWDVkCztKfx0CLmzHZNLNjw+/zgbIdF3vj9T
 S1cwFZLWr/ngf5mbyR88
 =pLN1
 -----END PGP SIGNATURE-----

Merge tag 'drm-for-v4.16' of git://people.freedesktop.org/~airlied/linux

Pull drm updates from Dave Airlie:
 "This seems to have been a comparatively quieter merge window, I assume
  due to holidays etc. The "biggest" change is AMD header cleanups, which
  merge/remove a bunch of them. The AMD gpu scheduler is now being made generic
  with the etnaviv driver wanting to reuse the code, hopefully other drivers
  can go in the same direction.

  Otherwise it's the usual lots of stuff in i915/amdgpu, not so much stuff
  elsewhere.

  Core:
   - Add .last_close and .output_poll_changed helpers to reduce driver footprints
   - Fix plane clipping
   - Improved debug printing support
   - Add panel orientation property
   - Update edid derived properties at edid setting
   - Reduction in fbdev driver footprint
   - Move amdgpu scheduler into core for other drivers to use.

  i915:
   - Selftest and IGT improvements
   - Fast boot prep work on IPS, pipe config
   - HW workarounds for Cannonlake, Geminilake
   - Cannonlake clock and HDMI2.0 fixes
   - GPU cache invalidation and context switch improvements
   - Display planes cleanup
   - New PMU interface for perf queries
   - New firmware support for KBL/SKL
   - Geminilake HW workaround for perforamce
   - Coffeelake stolen memory improvements
   - GPU reset robustness work
   - Cannonlake horizontal plane flipping
   - GVT work

  amdgpu/radeon:
   - RV and Vega header file cleanups (lots of lines gone!)
   - TTM operation context support
   - 48-bit GPUVM support for Vega/RV
   - ECC support for Vega
   - Resizeable BAR support
   - Multi-display sync support
   - Enable swapout for reserved BOs during allocation
   - S3 fixes on Raven
   - GPU reset cleanup and fixes
   - 2+1 level GPU page table

  amdkfd:
   - GFX7/8 SDMA user queues support
   - Hardware scheduling for multiple processes
   - dGPU prep work

  rcar:
   - Added R8A7743/5 support
   - System suspend/resume support

  sun4i:
   - Multi-plane support for YUV formats
   - A83T and LVDS support

  msm:
   - Devfreq support for GPU

  tegra:
   - Prep work for adding Tegra186 support
   - Tegra186 HDMI support
   - HDMI2.0 and zpos support by using generic helpers

  tilcdc:
   - Misc fixes

  omapdrm:
   - Support memory bandwidth limits
   - DSI command mode panel cleanups
   - DMM error handling

  exynos:
   - drop the old IPP subdriver.

  etnaviv:
   - Occlusion query fixes
   - Job handling fixes
   - Prep work for hooking in gpu scheduler

  armada:
   - Move closer to atomic modesetting
   - Allow disabling primary plane if overlay is full screen

  imx:
   - Format modifier support
   - Add tile prefetch to PRE
   - Runtime PM support for PRG

  ast:
   - fix LUT loading"

* tag 'drm-for-v4.16' of git://people.freedesktop.org/~airlied/linux: (1471 commits)
  drm/ast: Load lut in crtc_commit
  drm: Check for lessee in DROP_MASTER ioctl
  drm: fix gpu scheduler link order
  drm/amd/display: Demote error print to debug print when ATOM impl missing
  dma-buf: fix reservation_object_wait_timeout_rcu once more v2
  drm/amdgpu: Avoid leaking PM domain on driver unbind (v2)
  drm/amd/amdgpu: Add Polaris version check
  drm/amdgpu: Reenable manual GPU reset from sysfs
  drm/amdgpu: disable MMHUB power gating on raven
  drm/ttm: Don't unreserve swapped BOs that were previously reserved
  drm/ttm: Don't add swapped BOs to swap-LRU list
  drm/amdgpu: only check for ECC on Vega10
  drm/amd/powerplay: Fix smu_table_entry.handle type
  drm/ttm: add VADDR_FLAG_UPDATED_COUNT to correctly update dma_page global count
  drm: Fix PANEL_ORIENTATION_QUIRKS breaking the Kconfig DRM menuconfig
  drm/radeon: fill in rb backend map on evergreen/ni.
  drm/amdgpu/gfx9: fix ngg enablement to clear gds reserved memory (v2)
  drm/ttm: only free pages rather than update global memory count together
  drm/amdgpu: fix CPU based VM updates
  drm/amdgpu: fix typo in amdgpu_vce_validate_bo
  ...
 2018-02-01 17:48:47 -08:00
Linus Torvalds
3879ae653a The core framework has a handful of patches this time around, mostly due 
to the clk rate protection support added by Jerome Brunet. This feature
 will allow consumers to lock in a certain rate on the output of a clk so
 that things like audio playback don't hear pops when the clk frequency
 changes due to shared parent clks changing rates. Currently the clk
 API doesn't guarantee the rate of a clk stays at the rate you request
 after clk_set_rate() is called, so this new API will allow drivers
 to express that requirement. Beyond this, the core got some debugfs
 pretty printing patches and a couple minor non-critical fixes.
 
 Looking outside of the core framework diff we have some new driver
 additions and the removal of a legacy TI clk driver. Both of these hit
 high in the dirstat. Also, the removal of the asm-generic/clkdev.h file
 causes small one-liners in all the architecture Kbuild files. Overall, the
 driver diff seems to be the normal stuff that comes all the time to
 fix little problems here and there and to support new hardware.
 
 Core:
  - Clk rate protection
  - Symbolic clk flags in debugfs output
  - Clk registration enabled clks while doing bookkeeping updates
 
 New Drivers:
  - Spreadtrum SC9860
  - HiSilicon hi3660 stub
  - Qualcomm A53 PLL, SPMI clkdiv, and MSM8916 APCS
  - Amlogic Meson-AXG
  - ASPEED BMC
 
 Removed Drivers:
  - TI OMAP 3xxx legacy clk (non-DT) support
  - asm*/clkdev.h got removed (not really a driver)
 
 Updates:
  - Renesas FDP1-0 module clock on R-Car M3-W
  - Renesas LVDS module clock on R-Car V3M
  - Misc fixes to pr_err() prints
  - Qualcomm MSM8916 audio fixes
  - Qualcomm IPQ8074 rounded out support for more peripherals
  - Qualcomm Alpha PLL variants
  - Divider code was using container_of() on bad pointers
  - Allwinner DE2 clks on H3
  - Amlogic minor data fixes and dropping of CLK_IGNORE_UNUSED
  - Mediatek clk driver compile test support
  - AT91 PMC clk suspend/resume restoration support
  - PLL issues fixed on si5351
  - Broadcom IProc PLL calculation updates
  - DVFS support for Armada mvebu CPU clks
  - Allwinner fixed post-divider support
  - TI clkctrl fixes and support for newer SoCs
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABCAAGBQJac5vRAAoJEK0CiJfG5JUlUaIP/Riq0tbApfc4k4GMvSvaieR/
 AwZFIMCxOxO+KGdUsBWj7UUoDfBYmxyknHZkVUA/m+Lm7cRH/YHHMghEceZLaBYW
 zPQmDfkTl/QkwysXZMCw9vg4vO0tt5gWbHljQnvVhxVVTCkIRpaE8Vkktj1RZzpY
 WU/TkvPbVGY3SNm504TRXKWC9KpMTEXVvzqlg6zLDJ/jE7PGzBKtewqMoLDCBH2L
 q6b50BSXDo2Hep0vm6e5xneXKjLNR4kgN4PkbM4Yoi4iWLLbgAu79NfyOvvr/imS
 HxOHRms9tejtyaiR6bQSF0pbLOERZ3QSbMFEbxdxnCTuPEfy3Nw/2W7mNJlhJa8g
 EGLMnLL4WdloL4Z83dAcMrj9OmxYf7Yobf5dMidLrQT5EYuafdj0ParbI8TQpWSB
 eTqaffSUGPE/7xuKouYBcbvocpXXWCcokrP/mEn3OEHXkIeeut1Jd3RmEvsi3gtJ
 pNraJTIpvt4c05rj6yLUOhWfyqlA+fH3p4Fx3rrH1tmKEiG+lrhKoxF26uALZe0V
 OvarhG+LPIE10pCIYlQjZjQVnYLGCxsGAIoK1uz7VYvFPh2T0cxQlzzeqFgrlTyN
 32hMj3LhkQw82FG9xZqjTX1935R35mySRlx63x7HStI1YFief2X9+RHjJR/lofG0
 nC0JWTp5sC/pKf54QBXj
 =bGPp
 -----END PGP SIGNATURE-----

Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

Pull clk updates from Stephen Boyd:
 "The core framework has a handful of patches this time around, mostly
  due to the clk rate protection support added by Jerome Brunet.

  This feature will allow consumers to lock in a certain rate on the
  output of a clk so that things like audio playback don't hear pops
  when the clk frequency changes due to shared parent clks changing
  rates. Currently the clk API doesn't guarantee the rate of a clk stays
  at the rate you request after clk_set_rate() is called, so this new
  API will allow drivers to express that requirement.

  Beyond this, the core got some debugfs pretty printing patches and a
  couple minor non-critical fixes.

  Looking outside of the core framework diff we have some new driver
  additions and the removal of a legacy TI clk driver. Both of these hit
  high in the dirstat. Also, the removal of the asm-generic/clkdev.h
  file causes small one-liners in all the architecture Kbuild files.

  Overall, the driver diff seems to be the normal stuff that comes all
  the time to fix little problems here and there and to support new
  hardware.

  Summary:

  Core:
   - Clk rate protection
   - Symbolic clk flags in debugfs output
   - Clk registration enabled clks while doing bookkeeping updates

  New Drivers:
   - Spreadtrum SC9860
   - HiSilicon hi3660 stub
   - Qualcomm A53 PLL, SPMI clkdiv, and MSM8916 APCS
   - Amlogic Meson-AXG
   - ASPEED BMC

  Removed Drivers:
   - TI OMAP 3xxx legacy clk (non-DT) support
   - asm*/clkdev.h got removed (not really a driver)

  Updates:
   - Renesas FDP1-0 module clock on R-Car M3-W
   - Renesas LVDS module clock on R-Car V3M
   - Misc fixes to pr_err() prints
   - Qualcomm MSM8916 audio fixes
   - Qualcomm IPQ8074 rounded out support for more peripherals
   - Qualcomm Alpha PLL variants
   - Divider code was using container_of() on bad pointers
   - Allwinner DE2 clks on H3
   - Amlogic minor data fixes and dropping of CLK_IGNORE_UNUSED
   - Mediatek clk driver compile test support
   - AT91 PMC clk suspend/resume restoration support
   - PLL issues fixed on si5351
   - Broadcom IProc PLL calculation updates
   - DVFS support for Armada mvebu CPU clks
   - Allwinner fixed post-divider support
   - TI clkctrl fixes and support for newer SoCs"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (125 commits)
  clk: aspeed: Handle inverse polarity of USB port 1 clock gate
  clk: aspeed: Fix return value check in aspeed_cc_init()
  clk: aspeed: Add reset controller
  clk: aspeed: Register gated clocks
  clk: aspeed: Add platform driver and register PLLs
  clk: aspeed: Register core clocks
  clk: Add clock driver for ASPEED BMC SoCs
  clk: mediatek: adjust dependency of reset.c to avoid unexpectedly being built
  clk: fix reentrancy of clk_enable() on UP systems
  clk: meson-axg: fix potential NULL dereference in axg_clkc_probe()
  clk: Simplify debugfs registration
  clk: Fix debugfs_create_*() usage
  clk: Show symbolic clock flags in debugfs
  clk: renesas: r8a7796: Add FDP clock
  clk: Move __clk_{get,put}() into private clk.h API
  clk: sunxi: Use CLK_IS_CRITICAL flag for critical clks
  clk: Improve flags doc for of_clk_detect_critical()
  arch: Remove clkdev.h asm-generic from Kbuild
  clk: sunxi-ng: a83t: Add M divider to TCON1 clock
  clk: Prepare to remove asm-generic/clkdev.h
  ...
 2018-02-01 16:56:07 -08:00
Linus Torvalds
fe53d1443a ARM: SoC driver updates for 4.16 
A number of new drivers get added this time, along with many low-priority
 bugfixes. The most interesting changes by subsystem are:
 
 bus drivers:
   - Updates to the Broadcom bus interface driver to support newer SoC types
   - The TI OMAP sysc driver now supports updated DT bindings
 
 memory controllers:
   - A new driver for Tegra186 gets added
   - A new driver for the ti-emif sram, to allow relocating
     suspend/resume handlers there
 
 SoC specific:
   - A new driver for Qualcomm QMI, the interface to the modem on MSM SoCs
   - A new driver for power domains on the actions S700 SoC
   - A driver for the Xilinx Zynq VCU logicoreIP
 
 reset controllers:
   - A new driver for Amlogic Meson-AGX
   - various bug fixes
 
 tee subsystem:
   - A new user interface got added to enable asynchronous communication
     with the TEE supplicant.
   - A new method of using user space memory for communication with
     the TEE is added
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJac0fQAAoJEGCrR//JCVIntjEQALc6kflEGJc/FPundbx9V3F/
 b+3+EX/uMnBnKsgZprz9ACPhx5eBH9QWja3A1zmIarb5c+q7zbBZDwhzUb8J8Yg8
 xEb0im7Wx/GcKjUYZVKYBxtz9KjkXDzhrq8IAvPg6ShNcIy/8hq7ZO3iOkGsTDcy
 /PyioWKC5g0dhJgtp91X1kgog5tuTaWOg39uUOqyEzwVu1vYVa4w+eeCzjEd6I//
 68R/zDQ52+hWw6WZGoYOsNYzuriOflnJRnNpwuGhMhLNULBJfWnd4hkqGm4E+hFa
 5dzW6vVAdIqjemFqPzCBT2WB4UG871aZX8DJ9HgnfX+g970nlsm1JY8Ck9MJNJum
 aDkqZG41ArUYzDFWu8vJ2SKsue5lEZp6TEO2mLEVYrdOjOgedj0Zxqmq2DYeigxd
 +ccOVgKJ9SsYw9ft1LkQ5BHCgOh3C7y9Kcg7oBnaEI5OTVvtf5PwEkT2cwbvgxYl
 EVKLhlJ0Af+QXOW8E5JbNQETpYw52DMm6UKHiYn/JCGxB/8J0bgJzImDJI4Dtu2h
 zqJITKJeTepqbfA5pmNfKa+20RhmsktdRCw2NN/QynY7EEtGjHAUVnlpZT2mrDco
 0m62b7Erek/776vJN5ECzE5e6XCs2N0MDE6Anp121C5zEmig/SMBrUosMzP7Jnis
 IDVC/QWkb3u85wK20Vc1
 =yz0k
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC driver updates from Arnd Bergmann:
 "A number of new drivers get added this time, along with many
  low-priority bugfixes. The most interesting changes by subsystem are:

  bus drivers:
   - Updates to the Broadcom bus interface driver to support newer SoC
     types
   - The TI OMAP sysc driver now supports updated DT bindings

  memory controllers:
   - A new driver for Tegra186 gets added
   - A new driver for the ti-emif sram, to allow relocating
     suspend/resume handlers there

  SoC specific:
   - A new driver for Qualcomm QMI, the interface to the modem on MSM
     SoCs
   - A new driver for power domains on the actions S700 SoC
   - A driver for the Xilinx Zynq VCU logicoreIP

  reset controllers:
   - A new driver for Amlogic Meson-AGX
   - various bug fixes

  tee subsystem:
   - A new user interface got added to enable asynchronous communication
     with the TEE supplicant.
   - A new method of using user space memory for communication with the
     TEE is added"

* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (84 commits)
  of: platform: fix OF node refcount leak
  soc: fsl: guts: Add a NULL check for devm_kasprintf()
  bus: ti-sysc: Fix smartreflex sysc mask
  psci: add CPU_IDLE dependency
  soc: xilinx: Fix Kconfig alignment
  soc: xilinx: xlnx_vcu: Use bitwise & rather than logical && on clkoutdiv
  soc: xilinx: xlnx_vcu: Depends on HAS_IOMEM for xlnx_vcu
  soc: bcm: brcmstb: Be multi-platform compatible
  soc: brcmstb: biuctrl: exit without warning on non brcmstb platforms
  Revert "soc: brcmstb: Only register SoC device on STB platforms"
  bus: omap: add MODULE_LICENSE tags
  soc: brcmstb: Only register SoC device on STB platforms
  tee: shm: Potential NULL dereference calling tee_shm_register()
  soc: xilinx: xlnx_vcu: Add Xilinx ZYNQMP VCU logicoreIP init driver
  dt-bindings: soc: xilinx: Add DT bindings to xlnx_vcu driver
  soc: xilinx: Create folder structure for soc specific drivers
  of: platform: populate /firmware/ node from of_platform_default_populate_init()
  soc: samsung: Add SPDX license identifiers
  soc: qcom: smp2p: Use common error handling code in qcom_smp2p_probe()
  tee: shm: don't put_page on null shm->pages
  ...
 2018-02-01 16:35:31 -08:00
Linus Torvalds
537433b624 ARM: SoC device tree updates for 4.16 
We get a moderate number of new machines this time, and only one
 new SoC variant (Actions S700):
 
 Actions:
   S700 Soc and CubieBoard7 development board
   Allo.com Sparky Single-board-computer
 
 Allwinner:
   Orange Pi R1 development board
   Libre Computer Board ALL-H3-CC H3 single-board computer
 
 ASpeed ast2x00:
    Witherspoon: OpenPower Power9 server manufactured by IBM that uses the ASPEED ast2500
    Zaius: OpenPower Power9 server manufactured by Invatech that uses the ASPEED ast2500
    Q71L: Intel Xeon server manufactured by Qanta that uses the ASPEED ast2400
 
 AT91:
   Axentia Nattis/Natte digital signage
   sama5d2 PTC-ek Evaluation board
 
 Freescale/NXP i.MX:
    SolidRun Humminboard2 development board
    Variscite DART-MX6 SoM and Carrier-board
    Technologic TS-4600 and TS-7970 development board
    Toradex Colibri iMX7D SoM board
    v1.5 variant of Solidrun Cubox-i and Hummingboard
 
 Freescale/NXP Layerscape:
    Moxa UC-8410A Series industrial computer
 
 Gemini:
   D-Link DNS-313 NAS enclosure
 
 OMAP:
   LogicPD OMAP35xx SOM-LV devkit
   LogicPD OMAP35xx Torpedo devkit
 
 Renesas:
   r8a77970 (V3M) Starter Kit board
   r8a7795 (M3-W) Salvator-XS board
 
 We finally managed to get the dtc warnings under control, with no more
 build-time warnings for bad device tree files. This includes fixes for
 the majority of platforms, including nomadik, samsung, lpc32xx, STi,
 spear, mediatek, freescale, qcom, realview, keystone, omap, kirkwood,
 renesas, hisilicon, and broadcom.
 
 Files get rearranged on a few platforms, in particular the Marvell
 Armada 7K/8K device tree files are changed in preparation for future
 SoC support, based on more than two of the same chips in one package,
 and some boards get renamed for oxnas for consistency.
 
 Finally, many existing SoCs gain descriptions for additional on-chip
 devices that we can now support with kernel drivers:
 
   Allwinner A83t (drm, ethernet, i2c, ...), H3/H5 (USB-OTG)
   Amlogic AXG family (clk, pinctrl, pwm, ...), and others (vpu, hdmi)
   Aspeed clk controller support
   Freescale LS1088A, LS1021A device support
   Gemini Ethernet, PCI, TVE, panel
   Keystone gpio, qspi, more uarts
   Mediatek cpufreq, regulator, clock, reset
   Marvell thermal, cpufreq, nand
   Renesas SMP, thermal, timer, PWM, sound, phy, ipmmu
   Rockchip Mipi, GPU, display
   Samsung Exynos5433 PMU, power domain, nfc
   Spreadtrum: sc9860 clocks
   Tegra TX2 PSDI, HDMI, I2C,SMMU, display, fuse, ...
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJac0fiAAoJEGCrR//JCVInGUYP/ikTcjrmtQxmMINdsy88gmN3
 lPk3jGoViyRzc9Y6hGUUXn1YNdK8+IqRkqLnhtVX3cOLS5pP2HwsvSgPmSSB3eQe
 NOhXUNRQaTbeS/eBGZxJbxEKSowQHU+43M2kRNQOht7UQzS8NnBj/1RGaxcFyNSw
 gIixWDZLgVTNCSloPaSrZmiwSa7rSM2q0ncBzzeafAZiTRNeOb6IUpnqu/n0Qnot
 er6VoEyxp6ThFqRB7O8bCAIwgqlyB9xSGBPNR/JI0e0xXo3KVE/2AjHYDHVP/Ttx
 X8vtb3m+RED7tX4oCmlrHb1SAAKpNi1Vzdg4PxmKCa7yb5xPog7OEr3rnpijzCL0
 y8IJLlVSPyx31yB7mIIzCjrcISrT7tOXp0ha88/NgNsGXw5Ln0GVEqTkmSrz/JWo
 z1G2tNwnstS64KK+chHOZfUto4Rzbrpmr9L1ziKIpSQtiNyOmiSu1c3EjHim7x4I
 Mfiv6+8J71faUYuKVK1oaX0gi43oSZHu4NuniQy8dg/OIpgPpHHpG1qCyAzgC6Pa
 r1Am2w33CXrJI78b4zG2pIDx0HghIjFUtjX9tijoFiMs1EZgbV6cJ2meep6Sy+XV
 RBxHXPU8obdcuBfhgjEygwLI0HSe0R78B15qPP/SNxAFeAvE950xfPrGAoZg7qo/
 o6B2iQSfsYQJbD8rUHaA
 =qN1F
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC device tree updates from Arnd Bergmann:
 "We get a moderate number of new machines this time, and only one new
  SoC variant (Actions S700):

  Actions:
   - S700 Soc and CubieBoard7 development board
   - Allo.com Sparky Single-board-computer

  Allwinner:
   - Orange Pi R1 development board
   - Libre Computer Board ALL-H3-CC H3 single-board computer

  ASpeed ast2x00:
   - Witherspoon: OpenPower Power9 server manufactured by IBM that uses the ASPEED ast2500
   - Zaius: OpenPower Power9 server manufactured by Invatech that uses the ASPEED ast2500
   - Q71L: Intel Xeon server manufactured by Qanta that uses the ASPEED ast2400

  AT91:
   - Axentia Nattis/Natte digital signage
   - sama5d2 PTC-ek Evaluation board

  Freescale/NXP i.MX:
   - SolidRun Humminboard2 development board
   - Variscite DART-MX6 SoM and Carrier-board
   - Technologic TS-4600 and TS-7970 development board
   - Toradex Colibri iMX7D SoM board
   - v1.5 variant of Solidrun Cubox-i and Hummingboard

  Freescale/NXP Layerscape:
   - Moxa UC-8410A Series industrial computer

  Gemini:
   - D-Link DNS-313 NAS enclosure

  OMAP:
   - LogicPD OMAP35xx SOM-LV devkit
   - LogicPD OMAP35xx Torpedo devkit

  Renesas:
   - r8a77970 (V3M) Starter Kit board
   - r8a7795 (M3-W) Salvator-XS board

  We finally managed to get the dtc warnings under control, with no more
  build-time warnings for bad device tree files. This includes fixes for
  the majority of platforms, including nomadik, samsung, lpc32xx, STi,
  spear, mediatek, freescale, qcom, realview, keystone, omap, kirkwood,
  renesas, hisilicon, and broadcom.

  Files get rearranged on a few platforms, in particular the Marvell
  Armada 7K/8K device tree files are changed in preparation for future
  SoC support, based on more than two of the same chips in one package,
  and some boards get renamed for oxnas for consistency.

  Finally, many existing SoCs gain descriptions for additional on-chip
  devices that we can now support with kernel drivers:

   - Allwinner A83t (drm, ethernet, i2c, ...), H3/H5 (USB-OTG)
   - Amlogic AXG family (clk, pinctrl, pwm, ...), and others (vpu, hdmi)
   - Aspeed clk controller support
   - Freescale LS1088A, LS1021A device support
   - Gemini Ethernet, PCI, TVE, panel
   - Keystone gpio, qspi, more uarts
   - Mediatek cpufreq, regulator, clock, reset
   - Marvell thermal, cpufreq, nand
   - Renesas SMP, thermal, timer, PWM, sound, phy, ipmmu
   - Rockchip Mipi, GPU, display
   - Samsung Exynos5433 PMU, power domain, nfc
   - Spreadtrum: sc9860 clocks
   - Tegra TX2 PSDI, HDMI, I2C,SMMU, display, fuse, ..."

* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (690 commits)
  arm64: dts: stratix10: fix SPI settings
  ARM: dts: socfpga: add i2c reset signals
  arm64: dts: stratix10: add USB ECC reset bit
  arm64: dts: stratix10: enable USB on the devkit
  ARM: dts: socfpga: disable over-current for Arria10 USB devkit
  ARM: dts: Nokia N9: add support for up/down keys in the dts
  ARM: dts: nomadik: add interrupt-parent for clcd
  ARM: dts: Add ethernet to a bunch of platforms
  ARM: dts: Add ethernet to the Gemini SoC
  ARM: dts: rename oxnas dts files
  ARM: dts: s5pv210: add interrupt-parent for ohci
  ARM: lpc3250: fix uda1380 gpio numbers
  ARM: dts: STi: Add gpio polarity for "hdmi,hpd-gpio" property
  ARM: dts: dra7: Reduce shut down temperature of non-cpu thermal zones
  ARM: dts: n900: Add aliases for lcd and tvout displays
  ARM: dts: Update ti-sysc data for existing users
  ARM: dts: Fix smartreflex compatible for omap3 shared mpu-iva instance
  arm64: dts: marvell: armada-80x0: Fix pinctrl compatible string
  arm: spear13xx: Fix spics gpio controller's warning
  arm: spear13xx: Fix dmas cells
  ...
 2018-02-01 16:07:54 -08:00
Linus Torvalds
2bed26606b DeviceTree updates for 4.16: 
- Convert to use memblock_virt_alloc in DT code which supports bootmem
   arches. With this we can remove the arch specific
   early_init_dt_alloc_memory_arch() functions.
 
 - Enable running the DT unittests on UML
 
 - Use SPDX license tags on DT files
 
 - Fix early FDT kconfig ifdef logic
 
 - Clean-up unittest Makefile
 
 - Fix function comment for of_irq_parse_raw
 
 - Add missing documentation for linux,initrd-{start,end} properties
 
 - Clean-up of binding examples using uppercase hex
 
 - Add trivial devices W83773G and Infineon TLV493D-A1B6
 
 - Add missing STM32 SoC bindings
 
 - Various small binding doc fixes
 -----BEGIN PGP SIGNATURE-----
 
 iQItBAABCAAXBQJac0m3EBxyb2JoQGtlcm5lbC5vcmcACgkQ+vtdtY28YcOmXA/9
 G/ZySEtV2RnW/z8bckNnG98F9M/yxFwKARYb4HPDGr4C6fYy9IO3sQ25Gjn9GgQm
 RzcOk40P+3YQvkb5eyha6zYYxrBwKNHjRoJJWpCpNAolJrYRgPn7gB9GLxs15mc8
 F1EdSrdJDsNxxrc44T6hJ2xfU/sY5Q7E9xVAKD9pStmENUhzyLnPuyT4UrqAnCVC
 1tqBjYgmHWsQxzgO9tSM629xKxgBVLPjoOULN8vWTcN+5RFQSgB/MFv611SKXo2h
 cIDH7Hm61MBMvblGTtEkz1pi+mF62BOvaHJdYKdAF0i1HrjIyIEysHC6rKrlYsF1
 B39HY8D+kIPr39OCdn6dONDtrWkmPSc/MYfqLjFDPIwgNtgDRkv9kugEi39/LTKP
 htpcD9zctRQLuDJtW+1TyQvNtEHEPY2QhRjKb1SdD4xK/phMcEhc8+sW88jFygtP
 xlNb12FCCjw83k801oX1QHgWR8mQg0cj2hrJxrMIJ+Hrb23TvBdN+wtPc6WkKjol
 zqHZ9vFK4z8LIPR6jPLsz9vAIBHcXKVWgSGSf41MhTSZYTOznR7HG1wgTcq4XMld
 VpKdWKbRa3B/ZqP01eCHmBLIt/f0pcieoa7b20uIf2PjWQmzRkaX9A0yfWrYsV/V
 JQogXMCSe7zfZBxrLRx37UP7hqMEIgWeTN+Ek0a4dOI=
 =v6gj
 -----END PGP SIGNATURE-----

Merge tag 'devicetree-for-4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux

Pull DeviceTree updates from Rob Herring:

 - Convert to use memblock_virt_alloc in DT code which supports
   bootmem arches. With this we can remove the arch specific
   early_init_dt_alloc_memory_arch() functions.

 - Enable running the DT unittests on UML

 - Use SPDX license tags on DT files

 - Fix early FDT kconfig ifdef logic

 - Clean-up unittest Makefile

 - Fix function comment for of_irq_parse_raw

 - Add missing documentation for linux,initrd-{start,end} properties

 - Clean-up of binding examples using uppercase hex

 - Add trivial devices W83773G and Infineon TLV493D-A1B6

 - Add missing STM32 SoC bindings

 - Various small binding doc fixes

* tag 'devicetree-for-4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (23 commits)
  xtensa: remove arch specific early DT functions
  x86: remove arch specific early_init_dt_alloc_memory_arch
  nios2: remove arch specific early_init_dt_alloc_memory_arch
  mips: remove arch specific early_init_dt_alloc_memory_arch
  metag: remove arch specific early DT functions
  cris: remove arch specific early DT functions
  libfdt: remove unnecessary include directive from <linux/libfdt.h>
  of: unittest: refactor Makefile
  of/fdt: use memblock_virt_alloc for early alloc
  of: Use SPDX license tag for DT files
  of/fdt: Fix #ifdef dependency of early flattree declarations
  dt-bindings: h8300 clocksource: correct spelling of pulse
  dt-bindings: imx6q-pcie: Add required property for i.MX6SX
  mmc: Don't reference Linux-specific OF_GPIO_ACTIVE_LOW flag in DT binding
  dt-bindings: Use lower case hex in unit-addresses
  dt-bindings: display: panel: Fix compatible string for Toshiba LT089AC29000
  dt-bindings: Add Infineon TLV493D-A1B6
  dt-bindings: mailbox: ti,message-manager: Fix interrupt name error
  dt-bindings: chosen: Document linux,initrd-{start,end}
  dt-bindings: arm: document supported STM32 SoC family
  ...
 2018-02-01 10:57:45 -08:00