Make sure that the CRTC code will call the enable/disable_vblank hooks.
Otherwise, since the refcounting will be off, we might end up in a
situation where the vblank management functions are called while the CRTC
is off.
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180221125703.4595-3-maxime.ripard@bootlin.com
In the case where mode_valid callback of our RGB connector was called
before mode_set was being called, the range of dividers would not be set,
resulting in a division by zero later on in the clk_round_rate logic.
Set the range of dividers before calling clk_round_rate to fix this.
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Tested-by: Giulio Benetti <giulio.benetti@micronovasrl.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180221125703.4595-2-maxime.ripard@bootlin.com
The current logic to deal with old DT missing the LVDS properties doesn't
take into account whether the LVDS output is supported in the first place,
resulting in spurious error messages on SoCs where it doesn't even matter.
Introduce a new TCON flag to list if LVDS is supported at all to prevent
this from happening.
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180221125703.4595-1-maxime.ripard@bootlin.com
Currently exclusive TCON clock lock is never released, which, for
example, prevents changing resolution on HDMI.
In order to fix that, release clock when disabling TCON. TCON is always
disabled first before new mode is set.
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180301213442.16677-7-jernej.skrabec@siol.net
I noticed that with 4.16-rc1 LVDS output on A83T based TBS A711 tablet doesn't
work (there's output but it's garbled). I compared some older patches for LVDS
support with the mainlined ones and this change is missing from mainline Linux.
I don't know what the register does exactly and the harcoded register value
doesn't inspire much confidence that it will work in a general case, so I'm
sending this RFC.
This patch fixes the issue on A83T.
Signed-off-by: Ondrej Jirman <megous@megous.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180222161217.23904-1-megous@megous.com
-----BEGIN PGP SIGNATURE-----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=pLN1
-----END PGP SIGNATURE-----
Merge tag 'drm-for-v4.16' of git://people.freedesktop.org/~airlied/linux
Pull drm updates from Dave Airlie:
"This seems to have been a comparatively quieter merge window, I assume
due to holidays etc. The "biggest" change is AMD header cleanups, which
merge/remove a bunch of them. The AMD gpu scheduler is now being made generic
with the etnaviv driver wanting to reuse the code, hopefully other drivers
can go in the same direction.
Otherwise it's the usual lots of stuff in i915/amdgpu, not so much stuff
elsewhere.
Core:
- Add .last_close and .output_poll_changed helpers to reduce driver footprints
- Fix plane clipping
- Improved debug printing support
- Add panel orientation property
- Update edid derived properties at edid setting
- Reduction in fbdev driver footprint
- Move amdgpu scheduler into core for other drivers to use.
i915:
- Selftest and IGT improvements
- Fast boot prep work on IPS, pipe config
- HW workarounds for Cannonlake, Geminilake
- Cannonlake clock and HDMI2.0 fixes
- GPU cache invalidation and context switch improvements
- Display planes cleanup
- New PMU interface for perf queries
- New firmware support for KBL/SKL
- Geminilake HW workaround for perforamce
- Coffeelake stolen memory improvements
- GPU reset robustness work
- Cannonlake horizontal plane flipping
- GVT work
amdgpu/radeon:
- RV and Vega header file cleanups (lots of lines gone!)
- TTM operation context support
- 48-bit GPUVM support for Vega/RV
- ECC support for Vega
- Resizeable BAR support
- Multi-display sync support
- Enable swapout for reserved BOs during allocation
- S3 fixes on Raven
- GPU reset cleanup and fixes
- 2+1 level GPU page table
amdkfd:
- GFX7/8 SDMA user queues support
- Hardware scheduling for multiple processes
- dGPU prep work
rcar:
- Added R8A7743/5 support
- System suspend/resume support
sun4i:
- Multi-plane support for YUV formats
- A83T and LVDS support
msm:
- Devfreq support for GPU
tegra:
- Prep work for adding Tegra186 support
- Tegra186 HDMI support
- HDMI2.0 and zpos support by using generic helpers
tilcdc:
- Misc fixes
omapdrm:
- Support memory bandwidth limits
- DSI command mode panel cleanups
- DMM error handling
exynos:
- drop the old IPP subdriver.
etnaviv:
- Occlusion query fixes
- Job handling fixes
- Prep work for hooking in gpu scheduler
armada:
- Move closer to atomic modesetting
- Allow disabling primary plane if overlay is full screen
imx:
- Format modifier support
- Add tile prefetch to PRE
- Runtime PM support for PRG
ast:
- fix LUT loading"
* tag 'drm-for-v4.16' of git://people.freedesktop.org/~airlied/linux: (1471 commits)
drm/ast: Load lut in crtc_commit
drm: Check for lessee in DROP_MASTER ioctl
drm: fix gpu scheduler link order
drm/amd/display: Demote error print to debug print when ATOM impl missing
dma-buf: fix reservation_object_wait_timeout_rcu once more v2
drm/amdgpu: Avoid leaking PM domain on driver unbind (v2)
drm/amd/amdgpu: Add Polaris version check
drm/amdgpu: Reenable manual GPU reset from sysfs
drm/amdgpu: disable MMHUB power gating on raven
drm/ttm: Don't unreserve swapped BOs that were previously reserved
drm/ttm: Don't add swapped BOs to swap-LRU list
drm/amdgpu: only check for ECC on Vega10
drm/amd/powerplay: Fix smu_table_entry.handle type
drm/ttm: add VADDR_FLAG_UPDATED_COUNT to correctly update dma_page global count
drm: Fix PANEL_ORIENTATION_QUIRKS breaking the Kconfig DRM menuconfig
drm/radeon: fill in rb backend map on evergreen/ni.
drm/amdgpu/gfx9: fix ngg enablement to clear gds reserved memory (v2)
drm/ttm: only free pages rather than update global memory count together
drm/amdgpu: fix CPU based VM updates
drm/amdgpu: fix typo in amdgpu_vce_validate_bo
...
Fixes one Kconfig issue and a enable some panels to work properly.
There is also a fix of error code return in sun4i.
-----BEGIN PGP SIGNATURE-----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=NLL4
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-fixes-2018-01-18' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
Fixes for 4.16:
Fixes one Kconfig issue and a enable some panels to work properly.
There is also a fix of error code return in sun4i.
* tag 'drm-misc-next-fixes-2018-01-18' of git://anongit.freedesktop.org/drm/drm-misc:
drm: Fix PANEL_ORIENTATION_QUIRKS breaking the Kconfig DRM menuconfig
drm/panel: lvds: Handle the optional regulator case properly
drm/sun4i: Fix error code in sun4i_tcon_bind()
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJaW+iVAAoJEHm+PkMAQRiGCDsIAJALNpX7odTx/8y+yCSWbpBH
E57iwr4rmnI6tXJY6gqBUWTYnjAcf4b8IsHGCO6q3WIE3l/kt+m3eA21a32mF2Db
/bfPGTOWu5LoOnFqzgH2kiFuC3Y474toxpld2YtkQWYxi5W7SUtIHi/jGgkUprth
g15yPfwYgotJd/gpmPfBDMPlYDYvLlnPYbTG6ZWdMbg39m2RF2m0BdQ6aBFLHvbJ
IN0tjCM6hrLFBP0+6Zn60pevUW9/AFYotZn2ankNTk5QVCQm14rgQIP+Pfoa5WpE
I25r0DbkG2jKJCq+tlgIJjxHKD37GEDMc4T8/5Y8CNNeT9Q8si9EWvznjaAPazw=
=o5gx
-----END PGP SIGNATURE-----
BackMerge tag 'v4.15-rc8' into drm-next
Linux 4.15-rc8
Daniel requested this for so the intel CI won't fall over on drm-next
so often.
It was only checking the divider when determing the closest match if
it could not match the requested rate exactly.
For a projector connected to an Olimex A20-OLinuXino-LIME using HDMI
with a native resolution of 1280x800 and pixel clock of 83.5 MHz, this
resulted in 1280x800 mode not being available and the following in dmesg
when the kernel is booted with drm.debug=0x3e:
[drm:drm_mode_debug_printmodeline] Modeline 37:"1280x800" 60 83500 1280 1352 1480 1680 800 810 816 831 0x48 0x5
[drm:drm_mode_prune_invalid] Not using 1280x800 mode: NOCLOCK
Fixes: 9c5681011a ("drm/sun4i: Add HDMI support")
Signed-off-by: Jonathan Liu <net147@gmail.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180109020323.11852-4-net147@gmail.com
It is possible that if there is no exact rate match and
"rounded = clk_hw_round_rate(parent, ideal)" gives high enough values
(e.g. if rounded is 2 * ideal) that the condition
"abs(rate - rounded / i) < abs(rate - best_parent / best_div)" is never
met and best_parent is never set. This results in req->rate and
req->best_parent_rate being assigned 0.
To avoid this, we set best_parent to the first calculated rate if it is
unset. The sun4i_tmds_calc_divider function already has a similar check.
Fixes: 9c5681011a ("drm/sun4i: Add HDMI support")
Signed-off-by: Jonathan Liu <net147@gmail.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180109020323.11852-2-net147@gmail.com
When attached to the connector, the mode_valid callback will only filter
the modes provided by the connector itself as part of its probe.
However, it will not be doing it when the mode is provided by the
userspace, which still might result in a broken configuration.
In order to enforce these constraints, move our mode_valid callback to the
encoder which doesn't have this behaviour.
Acked-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
[maxime: Wrote the commit log in order to update the patch from the merged
v3 to the v4 that was correct.]
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/0fa230a8-d01d-561a-f74f-6b4fd421255b@xs4all.nl
The commit 4c7f16d14a ("drm/sun4i: Fix TCON clock and regmap
initialization sequence") moved a bunch of logic around, but forgot to
update the gotos after the introduction of the err_free_dotclock label.
It means that if we fail later that the one introduced in that commit,
we'll just to the old label which isn't free the clock we created. This
will result in a breakage as soon as someone tries to do something with
that clock, since its resources will have been long reclaimed.
Cc: <stable@vger.kernel.org>
Fixes: 4c7f16d14a ("drm/sun4i: Fix TCON clock and regmap initialization sequence")
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/f83c1cebc731f0b4251f5ddd7b38c718cd79bb0b.1512662253.git-series.maxime.ripard@free-electrons.com
When I connected my cubieboard running 4.15-rc1 to my 4k display I got no
picture. Some digging found that there is no check against the upper
pixelclock limit of the HDMI output, so X selects a 4kp60 format at 594
MHz, which obviously won't work.
The patch below adds a check for the upper bound of what this hardware can
do, and it checks if the requested tmds clock can be obtained.
It also allows for the +/- 0.5% pixel clock variation that the HDMI spec permits.
That code is based on commit 22d0be2a55 ("drm: arcpgu: Allow some clock
deviation in crtc->mode_valid() callback") from Jose Abreu for drm/arc.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Thanks-to: Jose Abreu <Jose.Abreu@synopsys.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/162854cb-c7bd-d9ce-9fa0-9a6cd89c621b@xs4all.nl
Use drm_fb_cma_fbdev_init() and drm_fb_cma_fbdev_fini() which relies on
the fact that drm_device holds a pointer to the drm_fb_helper structure.
This means that the driver doesn't have to keep track of that.
Also use the drm_fb_helper functions directly.
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171115142001.45358-15-noralf@tronnes.org
Basic principle of operation when using YUV framebuffer is that chroma
planes have to be upscaled to same size as luma.
Because of that, expand DE2 scaler library to support that.
BSP driver uses another set of FIR filter coefficients for YUV planes.
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171201060550.10392-26-jernej.skrabec@siol.net
DE2 have many CSC units - channel input CSC, channel output CSC and
mixer output CSC and maybe more.
Fortunately, they have all same register layout, only base offsets
differs.
Add support only for channel output CSC for now.
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171201060550.10392-24-jernej.skrabec@siol.net
Base addresses of channel output CSC (CCSC) depends whether mixer in
question is first or second and if it is second, if supports VEP or not.
This new property will tell which set of base addresses to take.
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171201060550.10392-23-jernej.skrabec@siol.net
No all SoCs support scaling on all channels. For example, V3s support
scaling only on VI channels. Because of that, add additional
configuration bitmask which tells which channel support scaler.
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171201060550.10392-21-jernej.skrabec@siol.net
This commit adds basic support for VI planes. They are meant for video
overlay and because of that they support YUV formats too. However, using
YUV format is not straightforward, so only RGB formats are supported for
now.
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171201060550.10392-20-jernej.skrabec@siol.net
Till now, DE2 driver supported only UI planes. Before we add support for
VI planes, lets split out UI layer specific code from common parts. This
commit does the following:
- renames sun8i_layer.c to sun8i_ui_layer.c
- moves UI channel specific code to sun8i_ui_layer.c
- moves common code from sun8i_layer.c to sun8i_mixer.c
- renames function and structure names so it is apparent where they
belong to
No functional change is made.
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171201060550.10392-19-jernej.skrabec@siol.net
There is no point having code which sets interlace mode of mixer in
channel related function. Interlace mode will only change when CRTC
state will change, so let's move it to the block which is executed only
when primary plane state is changed.
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171201060550.10392-16-jernej.skrabec@siol.net
Channel size should be set every time plane is changed, not only when
primary plane changes. Current code works only because only one
(primary) plane is supported at the moment.
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171201060550.10392-15-jernej.skrabec@siol.net
Line width is a property of a framebuffer and it belongs to
sun8i_mixer_update_layer_buffer(). This will became even more obvious
when support for multi-plane formats will be added.
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171201060550.10392-14-jernej.skrabec@siol.net
Now that we have properly clipped coordinates in plane state structure,
use them.
This also fixes bug where source x and y were adjusted for negative
value, but width and height weren't. It wasn't discovered because
primary plane usually doesn't have negative coordinates.
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171201060550.10392-13-jernej.skrabec@siol.net
Since current DE2 driver doesn't know how to scale yet, add atomic check
function which checks that.
Nice side effect of that function is that populates clipped coordinates
and checks visibility of the plane. That data will be used in the
future.
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171201060550.10392-12-jernej.skrabec@siol.net
Till now, plane selection was hardcoded to first overlay in first UI
channel and layer parameter is unused.
Rename and add parameters to layer functions so they would represent HW
more accurately and start using then.
It turns out that overlays don't fit well in current DRM design, because
they can't be blended together or scaled independetly when they are set
to same channel. Because of that, always use only first overlay in each
channel.
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171201060550.10392-11-jernej.skrabec@siol.net
If we want to support multiple planes in the future, code which enables
pipe has to be moved to appropriate place and it must depend on channel
id instead of being hardcoded.
Side effect of that rework is definition of default Z position. For now,
put first channel at the bottom, second above it and so on.
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171201060550.10392-10-jernej.skrabec@siol.net
Now that some knowledge of DE2 is gained, rename or add some macros to
make code more readable.
Max channel macro is removed, since it is not used and it is not clear
if it has right value. Structures in BSP driver shows possibility of 5
channels maximum although there is no SoC with such configuration.
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171201060550.10392-9-jernej.skrabec@siol.net
BSP driver always sets blend mode for all channels, no matter if they
are really used or not. Do the same here.
The exact meaning of the value is not exactly known, but BSP driver
mentions "SRC OVER" and by digging through code some more info can be
found.
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171201060550.10392-8-jernej.skrabec@siol.net
Premultiply and color key control registers are already set to zero by
initialization code few lines above. Furthermore, it seems that
colorkeying doesn't really work. It's not used in BSP driver and
experiments with it all failed.
Just remove the code.
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171201060550.10392-6-jernej.skrabec@siol.net
Current code sets alpha mode to global alpha mode and global alpha
value to 0xff which is totaly opaque. That is not needed for two
reasons:
- only one plane is active and thus it can be blended only with
background, which is black,
- it will hinder proper blending when more than one plane is supported
Default mode (0) considers pixel alpha value or 0xff if pixel has
no alpha information. Global alpha value is ignored in this case.
Because of that, just remove the code.
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171201060550.10392-4-jernej.skrabec@siol.net
We need to pull 66660d4cf2 (drm: add connector info/property for
non-desktop displays [v2]) into drm-misc-next to continue the development
of the display rotation series.
Effectively this also pulls 4.15-r2 into drm-misc-next.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.com>
