Otherwise userspace resubmit the BOs again will trigger kernel WARNING
and fail the command submission.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Tested-by: Robert Święcki <robert@swiecki.net>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove the redundant codes to fix build warning
when CONFIG_DEBUG_FS is disabled.
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Candice Li <candice.li@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This adds soc21 common ip block support
Changed from v1:
Switch WREG32/RREG32_PCIE to use indirect reg access
helper for sco15 and onwards
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Stanley.Yang <Stanley.Yang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
add new write field macro to handle soc21
registers with reg prefix
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Stanley.Yang <Stanley.Yang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add nbio callback func used to query rom offset.
Used to query the rom offset for fetching the vbios.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
vram_info table provides various vram information
including vram_vendor, vram_type, vram_width, etc.
v2: correct the calculation of vram_width
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Likun Gao <Likun.Gao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To support query vram_width, vram_type, vram_vendor
information
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Likun Gao <Likun.Gao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Some initial settings now are not available from
the atom data table. The assumption that !ps[0]
|| !ps[1] in amdgpu_atom_asic_init is not valid.
In addition, driver needs to strictly follow
atomfirmware structure (asic_init_parameters) to
initialize parameters used to execute asic_init
function, otherwise, the execution of asic_init
would fail.
This shall be applicable to all soc15 adapters,but
let make the transition on soc21 first.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add helper function to execute atomfirmware asic_init
from the cmd table
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This data has no dependencies, so encapsulate it all within
amdgpu_discovery.c.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Check the table signatures and checksums and verify that
the tables exist before accessing them.
v2: disable MALL table for now
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add a function to fetch the mall size from the IP discovery
table. Properly handle harvest configurations where more
or less cache may be available.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Check the harvesting table to determing if any UMC blocks have
been harvested.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For chips with IP discovery get this from the table,
hardcode it for older asics.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Disable runtime power management on several sienna cichlid
cards, otherwise SMU will possibly fail to be resumed from
runtime suspend. Will drop this after a clean solution between
kernel driver and SMU FW is available.
amdgpu 0000:63:00.0: amdgpu: GECC is enabled
amdgpu 0000:63:00.0: amdgpu: SECUREDISPLAY: securedisplay ta ucode is not available
amdgpu 0000:63:00.0: amdgpu: SMU is resuming...
amdgpu 0000:63:00.0: amdgpu: SMU: I'm not done with your command: SMN_C2PMSG_66:0x0000000E SMN_C2PMSG_82:0x00000080
amdgpu 0000:63:00.0: amdgpu: Failed to SetDriverDramAddr!
amdgpu 0000:63:00.0: amdgpu: Failed to setup smc hw!
[drm:amdgpu_device_ip_resume_phase2 [amdgpu]] *ERROR* resume of IP block <smu> failed -62
amdgpu 0000:63:00.0: amdgpu: amdgpu_device_ip_resume failed (-62)
v2: seperate to a function.
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
From the GC info table to the gfx config structure in the
driver. The driver will use this data to configure the
card correctly.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add function to decode IP version.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Extend HWIP MAX INSTANCE to 11.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
While technically Xen dom0 is a virtual machine too, it does have
access to most of the hardware so it doesn't need to be considered a
"passthrough". Commit b818a5d374 ("drm/amdgpu/gmc: use PCI BARs for
APUs in passthrough") changed how FB is accessed based on passthrough
mode. This breaks amdgpu in Xen dom0 with message like this:
[drm:dc_dmub_srv_wait_idle [amdgpu]] *ERROR* Error waiting for DMUB idle: status=3
While the reason for this failure is unclear, the passthrough mode is
not really necessary in Xen dom0 anyway. So, to unbreak booting affected
kernels, disable passthrough mode in this case.
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/1985
Fixes: b818a5d374 ("drm/amdgpu/gmc: use PCI BARs for APUs in passthrough")
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The logic to update the IO links when a KFD device
is removed was not correct as it would miss updating
the proximity domain values for some nodes where the
node_from and node_to both were greater values than the
proximity domain value of the KFD device being removed
from topology.
Fixes: 46d18d510d ("drm/amdkfd: Cleanup IO links during KFD device removal")
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
All uses of the 'kfd->gtt_sa_bitmap' bitmap are protected with the
'kfd->gtt_sa_lock' mutex.
So:
- prefer the non-atomic '__set_bit()' function
- use the non-atomic 'bitmap_[set|clear]()' functions instead of
equivalent 'for' loops. These functions can work on several bits at a
time
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
'kfd->gtt_sa_bitmap' is a bitmap. So use 'bitmap_zalloc()' to simplify
code, improve the semantic and avoid some open-coded arithmetic in
allocator arguments.
Also change the corresponding 'kfree()' into 'bitmap_free()' to keep
consistency.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
From [1], I realized two other calls to dcn30 code are associated with
FPU operations and are not protected by DC_FP_* macros:
* dcn30_populate_dml_writeback_from_context()
* dcn30_set_mcif_arb_params()
So, since FPU-associated code is not fully isolated in dcn30, and
dcn3.1.x reuses them, let's wrap their calls properly.
Note: this patch complements the fix from [1].
[1] https://lore.kernel.org/amd-gfx/20220329082957.1662655-1-chandan.vurdigerenataraj@amd.com/
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If the kzalloc() fails then this code will crash. Return -ENOMEM instead.
Fixes: e50d9ba0d2 ("drm/amdgpu: Add debugfs TA load/unload/invoke support")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There are two error code bugs here. The copy_to/from_user() functions
return the number of bytes remaining (a positive number). We should
return -EFAULT if the copy fails.
Second if we fail because "context.resp_status" is non-zero then return
-EINVAL instead of zero.
Fixes: e50d9ba0d2 ("drm/amdgpu: Add debugfs TA load/unload/invoke support")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Allow for PSR SMU optimization and PSR multiple display optimization.
[How]
Add feature flags of PSR smu optimization and PSR multiple display
optimiztaion, and set them during init sequence. By default, flags
are disabled.
Signed-off-by: David Zhang <dingchen.zhang@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Roman Li <Roman.Li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Without MMHUB clock gating being enabled then MMHUB will not disconnect
from DF and will result in DF C-state entry can't be accessed during S2idle
suspend, and eventually s0ix entry will be blocked.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix the following coccicheck warning:
drivers/gpu/drm/amd/display/dc/dcn201/dcn201_hwseq.c:98:8-10:
WARNING: possible condition with no effect (if == else)
Reviewed-by: Zhan Liu <zhan.liu@amd.com>
Signed-off-by: Guo Zhengkui <guozhengkui@vivo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It's not used outside of dcn31_clk_mgr.c.
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The gfx_v10_0_ring_test_ib() function uses 20 bytes instead of 16
bytes during the test. The patch sets the size of the allocation to be
4-byte larger to match the actual usage.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Haohui Mai <ricetons@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Updated the patch for the pre-vega hardware. I kept the clamping code
to be safe.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Haohui Mai <ricetons@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch fixes the issue where the driver miscomputes the 64-bit
values of the wptr of the SDMA doorbell when initializing the
hardware. SDMA engines v4 and later on have full 64-bit registers for
wptr thus they should be set properly.
Older generation hardwares like CIK / SI have only 16 / 20 / 24bits
for the WPTR, where the calls of lower_32_bits() will be removed in a
following patch.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Haohui Mai <ricetons@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Sparse reports these issues
si_dpm.c:332:26: warning: symbol 'cac_weights_pitcairn' was not declared. Should it be static?
si_dpm.c:1088:26: warning: symbol 'cac_weights_oland' was not declared. Should it be static?
Both of these variables are only used in si_dpm.c. Single file variables
should be static, so change their storage-class specifiers to static.
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Sparse reports these issues
cik_blit_shaders.c:31:11: warning: symbol 'cik_default_state' was not declared. Should it be static?
cik_blit_shaders.c:246:11: warning: symbol 'cik_default_size' was not declared. Should it be static?
cik_default_state and cik_default_size are only used in cik.c. Single file symbols
should be static. So move their definitions to cik_blit_shaders.h and change their
storage-class-specifier to static.
Remove unneeded cik_blit_shader.c
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix kernel-doc warnings for a comment that should not use
kernel-doc notation:
dmub_psr.c:235: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* Set PSR power optimization flags.
dmub_psr.c:235: warning: missing initial short description on line:
* Set PSR power optimization flags.
Fixes: e5dfcd2727 ("drm/amd/display: dc_link_set_psr_allow_active refactoring")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Robin Chen <po-tchen@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Anthony Koo <Anthony.Koo@amd.com>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Change SVM range mapping flags or access attributes don't trigger
migration, if range is already mapped on GPUs we should update GPU
mapping and pass flush_tlb flag true to amdgpu vm.
Change SVM range preferred_loc or migration granularity don't need
update GPU mapping, skip the validate_and_map.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
