Add the spec version to the title line.
Explain likely source of "Unknown lines".
"Unknown lines" in nested tests are optionally indented.
Add "Unknown lines" items to differences between TAP & KTAP list
Convert "Major differences between TAP and KTAP" from a bullet list
to a table. The bullet list was being formatted as a single
paragraph.
Reviewed-by: Tim Bird <Tim.Bird@sony.com>
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Frank Rowand <frank.rowand@sony.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Link: https://lore.kernel.org/r/20220210233630.3304495-1-frowand.list@gmail.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
It turns out that LaTeX enables \write18, which allows (some) shell
commands to be executed from the document source, by default. This the
often-seen warning during a pdfdocs build:
restricted \write18 enabled
That is a potential security problem and is entirely unnecessary; nothing
in the kernel PDF docs build needs that capability. So disable \write18
explicitly.
Signed-off-by: Akira Yokosawa <akiyks@gmail.com>
Link: https://lore.kernel.org/r/519bd2d9-1bee-03e1-eeb4-d9883c18be0c@gmail.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
PDF-generation improvements from Akira Yokasawa; Akira says:
This patch set improves conversions of DOT -> PDF and SVG -> PDF
for PDF docs.
* DOT -> PDF conversion
Current scheme uses "dot -Tpdf" (of graphviz).
Cons:
- openSUSE's dot(1) does not support -Tpdf.
- Other distro's dot(1) generates PDFs with unnecessarily wide
margins for inclusion into LaTeX docs.
Patch 1/4 changes the route to the following two steps:
1. DOT -> SVG by "dot -Tsvg"
2. SVG -> PDF by "rsvg-convert -f pdf" with fallback to convert(1)
Pros:
- Improved portability across distros
- Less space around graphs in final PDF documents
Con:
- On systems without rsvg-convert, generated PDF will be of raster
image.
Patch 2/4 avoids raster-image PDF by using "dot -Tpdf" on systems where
the option is available.
* SVG -> PDF conversion
Current scheme uses convert(1) (of ImageMagick)
Cons:
- Generated PDFs are of raster image. Some of them look blurry.
- Raster images tend to be large in size.
- convert(1) delegates SVG decoding to rsvg-convert(1).
It doesn't cover full range of Inkscape-specific SVG features
and fails to convert some of SVG figures properly.
Improper conversions are observed with SVGs listed below (incomplete,
conversion quality depends on the version of rsvg-convert):
- Documentation/userspace-api/media/v4l/selection.svg
- Documentation/userspace-api/media/v4l/vbi_525.svg
- Documentation/userspace-api/media/v4l/vbi_625.svg
- Documentation/userspace-api/media/v4l/vbi_hsync.svg
- Documentation/admin-guide/blockdev/drbd/DRBD-8.3-data-packets.svg
- Documentation/admin-guide/blockdev/drbd/DRBD-data-packages.svg
If you have Inkscape installed as well, convert(1) delegates SVG
decoding to inkscape(1) rather than to rsvg-convert(1) and SVGs listed
above can be rendered properly.
So if Inkscape is required for converting those SVGs properly, why not
use it directly in the first place?
Patches 3/4 and 4/4 add code to utilize inkscape(1) for SVG -> PDF
conversion when it is available. They don't modify any existing
requirements for kernel-doc.
Patch 3/4 adds the alternative route of SVG -> PDF conversion by
inkscape(1).
Patch 4/4 delegates warning messages from inkscape(1) to kernellog.verbose
as they are likely harmless in command-line uses.
Pros:
- Generated PDFs are of vector graphics.
- Vector graphics tends to be smaller in size and looks nicer when
zoomed in.
- SVGs drawn by Inkscape are fully supported.
On systems without Inkscape, no regression is expected by these two
patches.
Depending on its version, distro config, and system-setup type,
inkscape(1) emits various warning messages which are harmless in
command-line uses.
List of such warning messages (incomplete, long ones wrapped):
- Gtk-Message: hh:mm:ss.nnn: Failed to load module "canberra-gtk-module"
- Unable to init server: Could not connect: Connection refused
- Failed to get connection
- ** (inkscape:xxx): CRITICAL **: hh:mm:ss.nnn: dbus_g_proxy_new_for_name:
assertion 'connection != NULL' failed
- ** (inkscape:xxx): CRITICAL **: hh:mm:ss.nnn: dbus_g_proxy_call:
assertion 'DBUS_IS_G_PROXY (proxy)' failed
- ** (inkscape:xxx): CRITICAL **: hh:mm:ss.nnn: dbus_g_connection_register_g_object:
assertion 'connection != NULL' failed
- ** (inkscape:xxx): WARNING **: hh:mm:ss.nnn:
Fonts dir '/usr/share/inkscape/fonts' does not exist and will be ignored.
To avoid unnecessary anxiety, capture the message and output it via
kernellog.verbose or kernellog.warn depending on the exit code.
Signed-off-by: Akira Yokosawa <akiyks@gmail.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/e26a7b53-9155-8394-4a31-6006379b65a5@gmail.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Using convert(1) of ImageMagick for SVG -> PDF conversion results in
PDFs containing raster (bitmap) images which sometimes look blurry.
Ideally speaking, SVG to PDF conversion should retain vector graphics
in SVG.
rsvg-convert(1) can do such conversions with regard to SVG files
generated by dot(1).
Unfortunately, rsvg-convert(1) does not cover some of SVG features
specific to Inkscape.
inkscape(1) of Inkscape naturally covers such SVG features.
So add a route in svg2pdf() so that inkscape(1) is used when it is
available.
Note:
After this change, if you have Inkscape installed, ImageMagick nor
librsvg are not required.
Signed-off-by: Akira Yokosawa <akiyks@gmail.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Link: https://lore.kernel.org/r/3eea2a8d-c52d-ee07-cf7b-83784c6f6e4b@gmail.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
To prevent any regression on existing build systems, limit the
fallback of converting DOT -> raster PDF only when both of the
following conditions are met.
o dot(1) doesn't support -Tpdf
o rsvg-convert(1) is not found
While we are here, add kernellog.verbose messages related to
rsvg-convert, 'dot -Tpdf', and 'dot -Tsvg' commands.
Suggested-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Akira Yokosawa <akiyks@gmail.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/e76f61e1-7366-ba00-b119-8ea6a2499861@gmail.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
On openSUSE, dot(1) command does not support direct PDF output.
On other distros, generated PDF images have unnecessarily wide margins,
especially for small graphs.
By using dot(1) for DOT -> SVG, then rsvg-convert(1) for SVG -> PDF,
more optimal PDF images can be obtained, with the bonus of improved
portability across various distros.
Add rules in kfigure.py so that the above mentioned route is taken
when rsvg-convert(1) is available.
Note that rsvg-convert(1) is recommended by sphinx_pre_install.
So it is most likely that existing systems for building pdfdocs have
rsvg-convert(1) installed.
Note:
SVG features supported by rsvg-convert(1) vary depending on its
version and distro config.
For example, the one found on Ubuntu Bionic (version 2.40.20) does
poor job in rendering some of SVG files drawn by Inkscape.
SVG files generated by dot(1) are converted nicely even with such
old versions of rsvg-convert.
So this change does not affect the quality of such figures in any
way.
Signed-off-by: Akira Yokosawa <akiyks@gmail.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Link: https://lore.kernel.org/r/15b56dd3-081a-2469-c3a4-dfc1ca4c6c2d@gmail.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
According to the function prototype of rebalance_domains(), its first
parameter is *rq* and the document need to be updated.
Signed-off-by: Tang Yizhou <tangyizhou@huawei.com>
Link: https://lore.kernel.org/r/20211221031818.23186-1-tangyizhou@huawei.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
It's unclear from "Submitting Patches" documentation that Reported-by
is not supposed to be used against new features. (It's more clear
in the section 5.4 "Patch formatting and changelogs" of the "A guide
to the Kernel Development Process", where it suggests that change
should fix something existing in the kernel. Clarify the Reported-by
usage in the "Submitting Patches".
Reported-by: Florian Eckert <fe@dev.tdt.de>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20220127163258.48482-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
The topic of nesting and reentrancy in the context of early entry code
hasn't been addressed so far. So do it.
Signed-off-by: Nicolas Saenz Julienne <nsaenzju@redhat.com>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Link: https://lore.kernel.org/r/20220110105044.94423-2-nsaenzju@redhat.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
The entry/exit handling for exceptions, interrupts, syscalls and KVM is
not really documented except for some comments.
Fill the gaps.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de
Co-developed-by: Nicolas Saenz Julienne <nsaenzju@redhat.com>
Signed-off-by: Nicolas Saenz Julienne <nsaenzju@redhat.com>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
----
Changes since v3:
- s/nointr/noinstr/
Changes since v2:
- No big content changes, just style corrections, so it should be
pretty clean at this stage. In the light of this, I kept Mark's
Reviewed-by.
- Paul's style and paragraph re-writes
- Randy's style comments
- Add links to transition type sections
Documentation/core-api/entry.rst | 261 +++++++++++++++++++++++++++++++
Documentation/core-api/index.rst | 8 +
2 files changed, 269 insertions(+)
create mode 100644 Documentation/core-api/entry.rst
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20220110105044.94423-1-nsaenzju@redhat.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Translate power/opp.rst into Chinese.
Signed-off-by: Tang Yizhou <tangyizhou@huawei.com>
Reviewed-by: Alex Shi <alexs@kernel.org>
Reviewed-by: Yanteng Si <siyanteng@loongson.cn>
Link: https://lore.kernel.org/r/20211229024212.32752-4-tangyizhou@huawei.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Translate power/index.rst into Chinese.
Signed-off-by: Tang Yizhou <tangyizhou@huawei.com>
Reviewed-by: Alex Shi <alexs@kernel.org>
Reviewed-by: Yanteng Si <siyanteng@loongson.cn>
Link: https://lore.kernel.org/r/20211229024212.32752-3-tangyizhou@huawei.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Many */index in the Chinese index.rst are not in the same order as the
English version. Put them to where they should be.
Signed-off-by: Tang Yizhou <tangyizhou@huawei.com>
Reviewed-by: Yanteng Si <siyanteng@loongson.cn>
Link: https://lore.kernel.org/r/20211229024212.32752-2-tangyizhou@huawei.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
The RTLA documents were added to Documentation/ but never hooked into the
rest of the docs build, leading to a bunch of warnings like:
Documentation/tools/rtla/rtla-osnoise.rst: WARNING: document isn't included in any toctree
Add some basic glue to wire these documents into the build so that they are
available with the rest of the rendered docs. No attempt has been made to
turn the RTLA docs into proper RST files rather than warmed-over man pages;
that is an exercise for the future.
Fixes: d40d48e1f1 ("rtla: Add Documentation")
Acked-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Link: https://lore.kernel.org/r/877dau555q.fsf@meer.lwn.net
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
- Fix printing 'phys_addr' in 'perf script'.
- Fix failure to add events with 'perf probe' in ppc64 due to not removing
leading dot (ppc64 ABIv1).
- Fix cpu_map__item() python binding building.
- Support event alias in form foo-bar-baz, add pmu-events and parse-event tests
for it.
- No need to setup affinities when starting a workload or attaching to a pid.
- Use path__join() to compose a path instead of ad-hoc snprintf() equivalent.
- Override attr->sample_period for non-libpfm4 events.
- Use libperf cpumap APIs instead of accessing the internal state directly.
- Sync x86 arch prctl headers and files changed by the new
set_mempolicy_home_node syscall with the kernel sources.
- Remove duplicate include in cpumap.h.
- Remove redundant err variable.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCYeytiAAKCRCyPKLppCJ+
JyxZAQDNopdDHXLcUaa2Yp8M97QZQ31APY4vOSkn+AneVuBxvAEAs+BPCyBKWCHA
o45Hit7BzOtb3erHN5XVLTNW3WNBIQM=
=RdC6
-----END PGP SIGNATURE-----
Merge tag 'perf-tools-for-v5.17-2022-01-22' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull more perf tools updates from Arnaldo Carvalho de Melo:
- Fix printing 'phys_addr' in 'perf script'.
- Fix failure to add events with 'perf probe' in ppc64 due to not
removing leading dot (ppc64 ABIv1).
- Fix cpu_map__item() python binding building.
- Support event alias in form foo-bar-baz, add pmu-events and
parse-event tests for it.
- No need to setup affinities when starting a workload or attaching to
a pid.
- Use path__join() to compose a path instead of ad-hoc snprintf()
equivalent.
- Override attr->sample_period for non-libpfm4 events.
- Use libperf cpumap APIs instead of accessing the internal state
directly.
- Sync x86 arch prctl headers and files changed by the new
set_mempolicy_home_node syscall with the kernel sources.
- Remove duplicate include in cpumap.h.
- Remove redundant err variable.
* tag 'perf-tools-for-v5.17-2022-01-22' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
perf tools: Remove redundant err variable
perf test: Add parse-events test for aliases with hyphens
perf test: Add pmu-events test for aliases with hyphens
perf parse-events: Support event alias in form foo-bar-baz
perf evsel: Override attr->sample_period for non-libpfm4 events
perf cpumap: Remove duplicate include in cpumap.h
perf cpumap: Migrate to libperf cpumap api
perf python: Fix cpu_map__item() building
perf script: Fix printing 'phys_addr' failure issue
tools headers UAPI: Sync files changed by new set_mempolicy_home_node syscall
tools headers UAPI: Sync x86 arch prctl headers with the kernel sources
perf machine: Use path__join() to compose a path instead of snprintf(dir, '/', filename)
perf evlist: No need to setup affinities when disabling events for pid targets
perf evlist: No need to setup affinities when enabling events for pid targets
perf stat: No need to setup affinities when starting a workload
perf affinity: Allow passing a NULL arg to affinity__cleanup()
perf probe: Fix ppc64 'perf probe add events failed' case
The latest merge of the tracing tree sorts the mcount table at build time.
But s390 appears to do things differently (like always) and replaces the
sorted table back to the original unsorted one. As the ftrace algorithm
depends on it being sorted, bad things happen when it is not, and s390
experienced those bad things.
Add a new config to tell the boot if the mcount table is sorted or not,
and allow s390 to opt out of it.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCYezl+RQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qs5wAQCO2K1uB+XI4rown8zKLrGxOiFIXChi
Ds5GKJwYlcOnwQEAqKK3mAodmMy6ydbeY1OY1IDdTkOCAd752FDIe1Qozws=
=aF8W
-----END PGP SIGNATURE-----
Merge tag 'trace-v5.17-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull ftrace fix from Steven Rostedt:
"Fix s390 breakage from sorting mcount tables.
The latest merge of the tracing tree sorts the mcount table at build
time. But s390 appears to do things differently (like always) and
replaces the sorted table back to the original unsorted one. As the
ftrace algorithm depends on it being sorted, bad things happen when it
is not, and s390 experienced those bad things.
Add a new config to tell the boot if the mcount table is sorted or
not, and allow s390 to opt out of it"
* tag 'trace-v5.17-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
ftrace: Fix assuming build time sort works for s390
To speed up the boot process, as mcount_loc needs to be sorted for ftrace
to work properly, sorting it at build time is more efficient than boot up
and can save milliseconds of time. Unfortunately, this change broke s390
as it will modify the mcount_loc location after the sorting takes place
and will put back the unsorted locations. Since the sorting is skipped at
boot up if it is believed that it was sorted at run time, ftrace can crash
as its algorithms are dependent on the list being sorted.
Add a new config BUILDTIME_MCOUNT_SORT that is set when
BUILDTIME_TABLE_SORT but not if S390 is set. Use this config to determine
if sorting should take place at boot up.
Link: https://lore.kernel.org/all/yt9dee51ctfn.fsf@linux.ibm.com/
Fixes: 72b3942a17 ("scripts: ftrace - move the sort-processing in ftrace_init")
Reported-by: Sven Schnelle <svens@linux.ibm.com>
Tested-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
- Bring include/uapi/linux/nfc.h into the UAPI compile-test coverage
- Revert the workaround of CONFIG_CC_IMPLICIT_FALLTHROUGH
- Fix build errors in certs/Makefile
-----BEGIN PGP SIGNATURE-----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=9xMF
-----END PGP SIGNATURE-----
Merge tag 'kbuild-fixes-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Bring include/uapi/linux/nfc.h into the UAPI compile-test coverage
- Revert the workaround of CONFIG_CC_IMPLICIT_FALLTHROUGH
- Fix build errors in certs/Makefile
* tag 'kbuild-fixes-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
certs: Fix build error when CONFIG_MODULE_SIG_KEY is empty
certs: Fix build error when CONFIG_MODULE_SIG_KEY is PKCS#11 URI
Revert "Makefile: Do not quote value for CONFIG_CC_IMPLICIT_FALLTHROUGH"
usr/include/Makefile: add linux/nfc.h to the compile-test coverage
-----BEGIN PGP SIGNATURE-----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=RKW4
-----END PGP SIGNATURE-----
Merge tag 'bitmap-5.17-rc1' of git://github.com/norov/linux
Pull bitmap updates from Yury Norov:
- introduce for_each_set_bitrange()
- use find_first_*_bit() instead of find_next_*_bit() where possible
- unify for_each_bit() macros
* tag 'bitmap-5.17-rc1' of git://github.com/norov/linux:
vsprintf: rework bitmap_list_string
lib: bitmap: add performance test for bitmap_print_to_pagebuf
bitmap: unify find_bit operations
mm/percpu: micro-optimize pcpu_is_populated()
Replace for_each_*_bit_from() with for_each_*_bit() where appropriate
find: micro-optimize for_each_{set,clear}_bit()
include/linux: move for_each_bit() macros from bitops.h to find.h
cpumask: replace cpumask_next_* with cpumask_first_* where appropriate
tools: sync tools/bitmap with mother linux
all: replace find_next{,_zero}_bit with find_first{,_zero}_bit where appropriate
cpumask: use find_first_and_bit()
lib: add find_first_and_bit()
arch: remove GENERIC_FIND_FIRST_BIT entirely
include: move find.h from asm_generic to linux
bitops: move find_bit_*_le functions from le.h to find.h
bitops: protect find_first_{,zero}_bit properly
Return value from perf_event__process_tracing_data() directly instead
of taking this in another redundant variable.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lore.kernel.org/lkml/20220112080109.666800-1-chi.minghao@zte.com.cn
Signed-off-by: CGEL ZTE <cgel.zte@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a test which allows us to test parsing an event alias with hyphens.
Since these events typically do not exist on most host systems, add the
alias to the fake pmu.
Function perf_pmu__test_parse_init() has terms added to match known test
aliases.
Signed-off-by: John Garry <john.garry@huawei.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Qi Liu <liuqi115@huawei.com>
Cc: Shaokun Zhang <zhangshaokun@hisilicon.com>
Cc: linuxarm@huawei.com
Link: https://lore.kernel.org/r/1642432215-234089-4-git-send-email-john.garry@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a test for aliases with hyphens in the name to ensure that the
pmu-events tables are as expects. There should be no reason why these sort
of aliases would be treated differently, but no harm in checking.
Signed-off-by: John Garry <john.garry@huawei.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Qi Liu <liuqi115@huawei.com>
Cc: Shaokun Zhang <zhangshaokun@hisilicon.com>
Cc: linuxarm@huawei.com
Link: https://lore.kernel.org/r/1642432215-234089-3-git-send-email-john.garry@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Event aliasing for events whose name in the form foo-bar-baz is not
supported, while foo-bar, foo_bar_baz, and other combinations are, i.e.
two hyphens are not supported.
The HiSilicon D06 platform has events in such form:
$ ./perf list sdir-home-migrate
List of pre-defined events (to be used in -e):
uncore hha:
sdir-home-migrate
[Unit: hisi_sccl,hha]
$ sudo ./perf stat -e sdir-home-migrate
event syntax error: 'sdir-home-migrate'
\___ parser error
Run 'perf list' for a list of valid events
Usage: perf stat [<options>] [<command>]
-e, --event <event>event selector. use 'perf list' to list available events
To support, add an extra PMU event symbol type for "baz", and add a new
rule in the bison file.
Signed-off-by: John Garry <john.garry@huawei.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Qi Liu <liuqi115@huawei.com>
Cc: Shaokun Zhang <zhangshaokun@hisilicon.com>
Cc: linuxarm@huawei.com
Link: https://lore.kernel.org/r/1642432215-234089-2-git-send-email-john.garry@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
A previous patch preventing "attr->sample_period" values from being
overridden in pfm events changed a related behaviour in arm-spe.
Before said patch:
perf record -c 10000 -e arm_spe_0// -- sleep 1
Would yield an SPE event with period=10000. After the patch, the period
in "-c 10000" was being ignored because the arm-spe code initializes
sample_period to a non-zero value.
This patch restores the previous behaviour for non-libpfm4 events.
Fixes: ae5dcc8abe (“perf record: Prevent override of attr->sample_period for libpfm4 events”)
Reported-by: Chase Conklin <chase.conklin@arm.com>
Signed-off-by: German Gomez <german.gomez@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: KP Singh <kpsingh@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Yonghong Song <yhs@fb.com>
Cc: bpf@vger.kernel.org
Cc: netdev@vger.kernel.org
Link: http://lore.kernel.org/lkml/20220118144054.2541-1-german.gomez@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Remove all but the first include of stdbool.h from cpumap.h.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Lv Ruyi <lv.ruyi@zte.com.cn>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20220117083730.863200-1-lv.ruyi@zte.com.cn
Signed-off-by: CGEL ZTE <cgel.zte@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Switch from directly accessing the perf_cpu_map to using the appropriate
libperf API when possible. Using the API simplifies the job of
refactoring use of perf_cpu_map.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: André Almeida <andrealmeid@collabora.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Miaoqian Lin <linmq006@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Cc: Shunsuke Nakamura <nakamura.shun@fujitsu.com>
Cc: Song Liu <song@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Stephen Brennan <stephen.s.brennan@oracle.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Yury Norov <yury.norov@gmail.com>
Link: http://lore.kernel.org/lkml/20220122045811.3402706-3-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Value should be built as an integer.
Switch some uses of perf_cpu_map to use the library API.
Fixes: 6d18804b96 ("perf cpumap: Give CPUs their own type")
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: André Almeida <andrealmeid@collabora.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Miaoqian Lin <linmq006@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Cc: Shunsuke Nakamura <nakamura.shun@fujitsu.com>
Cc: Song Liu <song@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Stephen Brennan <stephen.s.brennan@oracle.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Yury Norov <yury.norov@gmail.com>
Link: http://lore.kernel.org/lkml/20220122045811.3402706-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Perf script was failed to print the phys_addr for SPE profiling.
One 'dummy' event is added by SPE profiling but it doesn't have PHYS_ADDR
attribute set, perf script then exits with error.
Now referring to 'addr', use evsel__do_check_stype() to check the type.
Before:
# perf record -e arm_spe_0/branch_filter=0,ts_enable=1,pa_enable=1,load_filter=1,jitter=0,\
store_filter=0,min_latency=0,event_filter=2/ -p 4064384 -- sleep 3
# perf script -F pid,tid,addr,phys_addr
Samples for 'dummy:u' event do not have PHYS_ADDR attribute set. Cannot print 'phys_addr' field.
After:
# perf record -e arm_spe_0/branch_filter=0,ts_enable=1,pa_enable=1,load_filter=1,jitter=0,\
store_filter=0,min_latency=0,event_filter=2/ -p 4064384 -- sleep 3
# perf script -F pid,tid,addr,phys_addr
4064384/4064384 ffff802f921be0d0 2f921be0d0
4064384/4064384 ffff802f921be0d0 2f921be0d0
Reviewed-by: German Gomez <german.gomez@arm.com>
Signed-off-by: Yao Jin <jinyao5@huawei.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Hanjun Guo <guohanjun@huawei.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20220121065954.2121900-1-liwei391@huawei.com
Signed-off-by: Wei Li <liwei391@huawei.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When CONFIG_MODULE_SIG_KEY is PKCS#11 URL (pkcs11:*), signing_key.x509
fails to build:
certs/Makefile:77: *** target pattern contains no '%'. Stop.
Due to the typo, $(X509_DEP) contains a colon.
Fix it.
Fixes: b8c96a6b46 ("certs: simplify $(srctree)/ handling and remove config_filename macro")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
This reverts commit cd8c917a56.
Commit 129ab0d2d9 ("kbuild: do not quote string values in
include/config/auto.conf") provided the final solution.
Now reverting the temporary workaround.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
As linux/nfc.h userspace compilation was finally fixed by commits
79b69a8370 ("nfc: uapi: use kernel size_t to fix user-space builds")
and 7175f02c4e ("uapi: fix linux/nfc.h userspace compilation errors"),
there is no need to keep the compile-test exception for it in
usr/include/Makefile.
Signed-off-by: Dmitry V. Levin <ldv@altlinux.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
