linux/drivers/gpu/drm/msm/msm_drv.c

1133 lines
27 KiB
C
Raw Normal View History

/*
* Copyright (C) 2013 Red Hat
* Author: Rob Clark <robdclark@gmail.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published by
* the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include <drm/drm_of.h>
#include "msm_drv.h"
#include "msm_debugfs.h"
#include "msm_fence.h"
#include "msm_gpu.h"
#include "msm_kms.h"
/*
* MSM driver version:
* - 1.0.0 - initial interface
* - 1.1.0 - adds madvise, and support for submits with > 4 cmd buffers
* - 1.2.0 - adds explicit fence support for submit ioctl
*/
#define MSM_VERSION_MAJOR 1
#define MSM_VERSION_MINOR 2
#define MSM_VERSION_PATCHLEVEL 0
static void msm_fb_output_poll_changed(struct drm_device *dev)
{
struct msm_drm_private *priv = dev->dev_private;
if (priv->fbdev)
drm_fb_helper_hotplug_event(priv->fbdev);
}
static const struct drm_mode_config_funcs mode_config_funcs = {
.fb_create = msm_framebuffer_create,
.output_poll_changed = msm_fb_output_poll_changed,
drm/atomic-helper: Again check modeset *before* plane states This essentially reverts commit 934ce1c23624526d9d784e0499190bb48113e6f4 Author: Rob Clark <robdclark@gmail.com> Date: Wed Nov 19 16:41:33 2014 -0500 drm/atomic: check mode_changed *after* atomic_check Depending upon the driver both orders (or maybe even interleaving) is required: - If ->atomic_check updates ->mode_changed then helper_check_modeset must be run afters. - If ->atomic_check depends upon accurate adjusted dotclock values for e.g. watermarks, then helper_check_modeset must be run first. The failure mode in the first case is usually a totally angry hw because the pixel format switching doesn't happen. The failure mode in the later case is usually nothing, since in most cases the old adjusted mode from the previous modeset wont be too far off to be a problem. So just underruns and perhaps even just suboptimal (from a power consumption) watermarks. Furthermore in the transitional helpers we only call ->atomic_check after the new modeset state has been fully set up (and hence computed). Given that asymmetry in expected failure modes I think it's safer to go back to the older order. So do that and give msm a special check function to compensate. Also update kerneldoc to explain this a bit. v2: Actually add the missing hunk Rob spotted. v3: Move msm_atomic_check into msm_atomic.c, requested by Rob. Cc: Rob Clark <robdclark@gmail.com> Reviewed-by: Rob Clark <robdclark@gmail.com> Tested-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
2014-11-26 16:02:18 +00:00
.atomic_check = msm_atomic_check,
.atomic_commit = msm_atomic_commit,
.atomic_state_alloc = msm_atomic_state_alloc,
.atomic_state_clear = msm_atomic_state_clear,
.atomic_state_free = msm_atomic_state_free,
};
#ifdef CONFIG_DRM_MSM_REGISTER_LOGGING
static bool reglog = false;
MODULE_PARM_DESC(reglog, "Enable register read/write logging");
module_param(reglog, bool, 0600);
#else
#define reglog 0
#endif
#ifdef CONFIG_DRM_FBDEV_EMULATION
static bool fbdev = true;
MODULE_PARM_DESC(fbdev, "Enable fbdev compat layer");
module_param(fbdev, bool, 0600);
#endif
static char *vram = "16m";
MODULE_PARM_DESC(vram, "Configure VRAM size (for devices without IOMMU/GPUMMU)");
module_param(vram, charp, 0);
bool dumpstate = false;
MODULE_PARM_DESC(dumpstate, "Dump KMS state on errors");
module_param(dumpstate, bool, 0600);
/*
* Util/helpers:
*/
struct clk *msm_clk_get(struct platform_device *pdev, const char *name)
{
struct clk *clk;
char name2[32];
clk = devm_clk_get(&pdev->dev, name);
if (!IS_ERR(clk) || PTR_ERR(clk) == -EPROBE_DEFER)
return clk;
snprintf(name2, sizeof(name2), "%s_clk", name);
clk = devm_clk_get(&pdev->dev, name2);
if (!IS_ERR(clk))
dev_warn(&pdev->dev, "Using legacy clk name binding. Use "
"\"%s\" instead of \"%s\"\n", name, name2);
return clk;
}
void __iomem *msm_ioremap(struct platform_device *pdev, const char *name,
const char *dbgname)
{
struct resource *res;
unsigned long size;
void __iomem *ptr;
if (name)
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, name);
else
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res) {
dev_err(&pdev->dev, "failed to get memory resource: %s\n", name);
return ERR_PTR(-EINVAL);
}
size = resource_size(res);
ptr = devm_ioremap_nocache(&pdev->dev, res->start, size);
if (!ptr) {
dev_err(&pdev->dev, "failed to ioremap: %s\n", name);
return ERR_PTR(-ENOMEM);
}
if (reglog)
printk(KERN_DEBUG "IO:region %s %p %08lx\n", dbgname, ptr, size);
return ptr;
}
void msm_writel(u32 data, void __iomem *addr)
{
if (reglog)
printk(KERN_DEBUG "IO:W %p %08x\n", addr, data);
writel(data, addr);
}
u32 msm_readl(const void __iomem *addr)
{
u32 val = readl(addr);
if (reglog)
pr_err("IO:R %p %08x\n", addr, val);
return val;
}
struct vblank_event {
struct list_head node;
int crtc_id;
bool enable;
};
static void vblank_ctrl_worker(struct work_struct *work)
{
struct msm_vblank_ctrl *vbl_ctrl = container_of(work,
struct msm_vblank_ctrl, work);
struct msm_drm_private *priv = container_of(vbl_ctrl,
struct msm_drm_private, vblank_ctrl);
struct msm_kms *kms = priv->kms;
struct vblank_event *vbl_ev, *tmp;
unsigned long flags;
spin_lock_irqsave(&vbl_ctrl->lock, flags);
list_for_each_entry_safe(vbl_ev, tmp, &vbl_ctrl->event_list, node) {
list_del(&vbl_ev->node);
spin_unlock_irqrestore(&vbl_ctrl->lock, flags);
if (vbl_ev->enable)
kms->funcs->enable_vblank(kms,
priv->crtcs[vbl_ev->crtc_id]);
else
kms->funcs->disable_vblank(kms,
priv->crtcs[vbl_ev->crtc_id]);
kfree(vbl_ev);
spin_lock_irqsave(&vbl_ctrl->lock, flags);
}
spin_unlock_irqrestore(&vbl_ctrl->lock, flags);
}
static int vblank_ctrl_queue_work(struct msm_drm_private *priv,
int crtc_id, bool enable)
{
struct msm_vblank_ctrl *vbl_ctrl = &priv->vblank_ctrl;
struct vblank_event *vbl_ev;
unsigned long flags;
vbl_ev = kzalloc(sizeof(*vbl_ev), GFP_ATOMIC);
if (!vbl_ev)
return -ENOMEM;
vbl_ev->crtc_id = crtc_id;
vbl_ev->enable = enable;
spin_lock_irqsave(&vbl_ctrl->lock, flags);
list_add_tail(&vbl_ev->node, &vbl_ctrl->event_list);
spin_unlock_irqrestore(&vbl_ctrl->lock, flags);
queue_work(priv->wq, &vbl_ctrl->work);
return 0;
}
static int msm_drm_uninit(struct device *dev)
{
struct platform_device *pdev = to_platform_device(dev);
struct drm_device *ddev = platform_get_drvdata(pdev);
struct msm_drm_private *priv = ddev->dev_private;
struct msm_kms *kms = priv->kms;
struct msm_gpu *gpu = priv->gpu;
struct msm_vblank_ctrl *vbl_ctrl = &priv->vblank_ctrl;
struct vblank_event *vbl_ev, *tmp;
/* We must cancel and cleanup any pending vblank enable/disable
* work before drm_irq_uninstall() to avoid work re-enabling an
* irq after uninstall has disabled it.
*/
cancel_work_sync(&vbl_ctrl->work);
list_for_each_entry_safe(vbl_ev, tmp, &vbl_ctrl->event_list, node) {
list_del(&vbl_ev->node);
kfree(vbl_ev);
}
msm_gem_shrinker_cleanup(ddev);
drm_kms_helper_poll_fini(ddev);
drm_dev_unregister(ddev);
msm_perf_debugfs_cleanup(priv);
msm_rd_debugfs_cleanup(priv);
#ifdef CONFIG_DRM_FBDEV_EMULATION
if (fbdev && priv->fbdev)
msm_fbdev_free(ddev);
#endif
drm_mode_config_cleanup(ddev);
pm_runtime_get_sync(dev);
drm_irq_uninstall(ddev);
pm_runtime_put_sync(dev);
flush_workqueue(priv->wq);
destroy_workqueue(priv->wq);
flush_workqueue(priv->atomic_wq);
destroy_workqueue(priv->atomic_wq);
if (kms && kms->funcs)
kms->funcs->destroy(kms);
if (gpu) {
mutex_lock(&ddev->struct_mutex);
// XXX what do we do here?
//pm_runtime_enable(&pdev->dev);
gpu->funcs->pm_suspend(gpu);
mutex_unlock(&ddev->struct_mutex);
drm/msm: fix locking inconsistencies in gpu->destroy() In error paths, this was being called without struct_mutex held. Leading to panics like: msm 1a00000.qcom,mdss_mdp: No memory protection without IOMMU Kernel panic - not syncing: BUG! CPU: 0 PID: 1409 Comm: cat Not tainted 4.0.0-dirty #4 Hardware name: Qualcomm Technologies, Inc. APQ 8016 SBC (DT) Call trace: [<ffffffc000089c78>] dump_backtrace+0x0/0x118 [<ffffffc000089da0>] show_stack+0x10/0x20 [<ffffffc0006686d4>] dump_stack+0x84/0xc4 [<ffffffc0006678b4>] panic+0xd0/0x210 [<ffffffc0003e1ce4>] drm_gem_object_free+0x5c/0x60 [<ffffffc000402870>] adreno_gpu_cleanup+0x60/0x80 [<ffffffc0004035a0>] a3xx_destroy+0x20/0x70 [<ffffffc0004036f4>] a3xx_gpu_init+0x84/0x108 [<ffffffc0004018b8>] adreno_load_gpu+0x58/0x190 [<ffffffc000419dac>] msm_open+0x74/0x88 [<ffffffc0003e0a48>] drm_open+0x168/0x400 [<ffffffc0003e7210>] drm_stub_open+0xa8/0x118 [<ffffffc0001a0e84>] chrdev_open+0x94/0x198 [<ffffffc000199f88>] do_dentry_open+0x208/0x310 [<ffffffc00019a4c4>] vfs_open+0x44/0x50 [<ffffffc0001aa26c>] do_last.isra.14+0x2c4/0xc10 [<ffffffc0001aac38>] path_openat+0x80/0x5e8 [<ffffffc0001ac354>] do_filp_open+0x2c/0x98 [<ffffffc00019b60c>] do_sys_open+0x13c/0x228 [<ffffffc00019b72c>] SyS_openat+0xc/0x18 CPU1: stopping But there isn't any particularly good reason to hold struct_mutex for teardown, so just standardize on calling it without the mutex held and use the _unlocked() versions for GEM obj unref'ing Signed-off-by: Rob Clark <robdclark@gmail.com>
2015-05-15 13:19:36 +00:00
gpu->funcs->destroy(gpu);
}
if (priv->vram.paddr) {
dma-mapping: use unsigned long for dma_attrs The dma-mapping core and the implementations do not change the DMA attributes passed by pointer. Thus the pointer can point to const data. However the attributes do not have to be a bitfield. Instead unsigned long will do fine: 1. This is just simpler. Both in terms of reading the code and setting attributes. Instead of initializing local attributes on the stack and passing pointer to it to dma_set_attr(), just set the bits. 2. It brings safeness and checking for const correctness because the attributes are passed by value. Semantic patches for this change (at least most of them): virtual patch virtual context @r@ identifier f, attrs; @@ f(..., - struct dma_attrs *attrs + unsigned long attrs , ...) { ... } @@ identifier r.f; @@ f(..., - NULL + 0 ) and // Options: --all-includes virtual patch virtual context @r@ identifier f, attrs; type t; @@ t f(..., struct dma_attrs *attrs); @@ identifier r.f; @@ f(..., - NULL + 0 ) Link: http://lkml.kernel.org/r/1468399300-5399-2-git-send-email-k.kozlowski@samsung.com Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Vineet Gupta <vgupta@synopsys.com> Acked-by: Robin Murphy <robin.murphy@arm.com> Acked-by: Hans-Christian Noren Egtvedt <egtvedt@samfundet.no> Acked-by: Mark Salter <msalter@redhat.com> [c6x] Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> [cris] Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> [drm] Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com> Acked-by: Joerg Roedel <jroedel@suse.de> [iommu] Acked-by: Fabien Dessenne <fabien.dessenne@st.com> [bdisp] Reviewed-by: Marek Szyprowski <m.szyprowski@samsung.com> [vb2-core] Acked-by: David Vrabel <david.vrabel@citrix.com> [xen] Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> [xen swiotlb] Acked-by: Joerg Roedel <jroedel@suse.de> [iommu] Acked-by: Richard Kuo <rkuo@codeaurora.org> [hexagon] Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> [m68k] Acked-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> [s390] Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Acked-by: Hans-Christian Noren Egtvedt <egtvedt@samfundet.no> [avr32] Acked-by: Vineet Gupta <vgupta@synopsys.com> [arc] Acked-by: Robin Murphy <robin.murphy@arm.com> [arm64 and dma-iommu] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-03 20:46:00 +00:00
unsigned long attrs = DMA_ATTR_NO_KERNEL_MAPPING;
drm_mm_takedown(&priv->vram.mm);
dma_free_attrs(dev, priv->vram.size, NULL,
dma-mapping: use unsigned long for dma_attrs The dma-mapping core and the implementations do not change the DMA attributes passed by pointer. Thus the pointer can point to const data. However the attributes do not have to be a bitfield. Instead unsigned long will do fine: 1. This is just simpler. Both in terms of reading the code and setting attributes. Instead of initializing local attributes on the stack and passing pointer to it to dma_set_attr(), just set the bits. 2. It brings safeness and checking for const correctness because the attributes are passed by value. Semantic patches for this change (at least most of them): virtual patch virtual context @r@ identifier f, attrs; @@ f(..., - struct dma_attrs *attrs + unsigned long attrs , ...) { ... } @@ identifier r.f; @@ f(..., - NULL + 0 ) and // Options: --all-includes virtual patch virtual context @r@ identifier f, attrs; type t; @@ t f(..., struct dma_attrs *attrs); @@ identifier r.f; @@ f(..., - NULL + 0 ) Link: http://lkml.kernel.org/r/1468399300-5399-2-git-send-email-k.kozlowski@samsung.com Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Vineet Gupta <vgupta@synopsys.com> Acked-by: Robin Murphy <robin.murphy@arm.com> Acked-by: Hans-Christian Noren Egtvedt <egtvedt@samfundet.no> Acked-by: Mark Salter <msalter@redhat.com> [c6x] Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> [cris] Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> [drm] Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com> Acked-by: Joerg Roedel <jroedel@suse.de> [iommu] Acked-by: Fabien Dessenne <fabien.dessenne@st.com> [bdisp] Reviewed-by: Marek Szyprowski <m.szyprowski@samsung.com> [vb2-core] Acked-by: David Vrabel <david.vrabel@citrix.com> [xen] Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> [xen swiotlb] Acked-by: Joerg Roedel <jroedel@suse.de> [iommu] Acked-by: Richard Kuo <rkuo@codeaurora.org> [hexagon] Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> [m68k] Acked-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> [s390] Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Acked-by: Hans-Christian Noren Egtvedt <egtvedt@samfundet.no> [avr32] Acked-by: Vineet Gupta <vgupta@synopsys.com> [arc] Acked-by: Robin Murphy <robin.murphy@arm.com> [arm64 and dma-iommu] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-03 20:46:00 +00:00
priv->vram.paddr, attrs);
}
component_unbind_all(dev, ddev);
msm_mdss_destroy(ddev);
ddev->dev_private = NULL;
drm_dev_unref(ddev);
kfree(priv);
return 0;
}
static int get_mdp_ver(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
return (int) (unsigned long) of_device_get_match_data(dev);
}
#include <linux/of_address.h>
static int msm_init_vram(struct drm_device *dev)
{
struct msm_drm_private *priv = dev->dev_private;
struct device_node *node;
unsigned long size = 0;
int ret = 0;
/* In the device-tree world, we could have a 'memory-region'
* phandle, which gives us a link to our "vram". Allocating
* is all nicely abstracted behind the dma api, but we need
* to know the entire size to allocate it all in one go. There
* are two cases:
* 1) device with no IOMMU, in which case we need exclusive
* access to a VRAM carveout big enough for all gpu
* buffers
* 2) device with IOMMU, but where the bootloader puts up
* a splash screen. In this case, the VRAM carveout
* need only be large enough for fbdev fb. But we need
* exclusive access to the buffer to avoid the kernel
* using those pages for other purposes (which appears
* as corruption on screen before we have a chance to
* load and do initial modeset)
*/
node = of_parse_phandle(dev->dev->of_node, "memory-region", 0);
if (node) {
struct resource r;
ret = of_address_to_resource(node, 0, &r);
of_node_put(node);
if (ret)
return ret;
size = r.end - r.start;
DRM_INFO("using VRAM carveout: %lx@%pa\n", size, &r.start);
/* if we have no IOMMU, then we need to use carveout allocator.
* Grab the entire CMA chunk carved out in early startup in
* mach-msm:
*/
} else if (!iommu_present(&platform_bus_type)) {
DRM_INFO("using %s VRAM carveout\n", vram);
size = memparse(vram, NULL);
}
if (size) {
dma-mapping: use unsigned long for dma_attrs The dma-mapping core and the implementations do not change the DMA attributes passed by pointer. Thus the pointer can point to const data. However the attributes do not have to be a bitfield. Instead unsigned long will do fine: 1. This is just simpler. Both in terms of reading the code and setting attributes. Instead of initializing local attributes on the stack and passing pointer to it to dma_set_attr(), just set the bits. 2. It brings safeness and checking for const correctness because the attributes are passed by value. Semantic patches for this change (at least most of them): virtual patch virtual context @r@ identifier f, attrs; @@ f(..., - struct dma_attrs *attrs + unsigned long attrs , ...) { ... } @@ identifier r.f; @@ f(..., - NULL + 0 ) and // Options: --all-includes virtual patch virtual context @r@ identifier f, attrs; type t; @@ t f(..., struct dma_attrs *attrs); @@ identifier r.f; @@ f(..., - NULL + 0 ) Link: http://lkml.kernel.org/r/1468399300-5399-2-git-send-email-k.kozlowski@samsung.com Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Vineet Gupta <vgupta@synopsys.com> Acked-by: Robin Murphy <robin.murphy@arm.com> Acked-by: Hans-Christian Noren Egtvedt <egtvedt@samfundet.no> Acked-by: Mark Salter <msalter@redhat.com> [c6x] Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> [cris] Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> [drm] Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com> Acked-by: Joerg Roedel <jroedel@suse.de> [iommu] Acked-by: Fabien Dessenne <fabien.dessenne@st.com> [bdisp] Reviewed-by: Marek Szyprowski <m.szyprowski@samsung.com> [vb2-core] Acked-by: David Vrabel <david.vrabel@citrix.com> [xen] Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> [xen swiotlb] Acked-by: Joerg Roedel <jroedel@suse.de> [iommu] Acked-by: Richard Kuo <rkuo@codeaurora.org> [hexagon] Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> [m68k] Acked-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> [s390] Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Acked-by: Hans-Christian Noren Egtvedt <egtvedt@samfundet.no> [avr32] Acked-by: Vineet Gupta <vgupta@synopsys.com> [arc] Acked-by: Robin Murphy <robin.murphy@arm.com> [arm64 and dma-iommu] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-03 20:46:00 +00:00
unsigned long attrs = 0;
void *p;
priv->vram.size = size;
drm_mm_init(&priv->vram.mm, 0, (size >> PAGE_SHIFT) - 1);
spin_lock_init(&priv->vram.lock);
dma-mapping: use unsigned long for dma_attrs The dma-mapping core and the implementations do not change the DMA attributes passed by pointer. Thus the pointer can point to const data. However the attributes do not have to be a bitfield. Instead unsigned long will do fine: 1. This is just simpler. Both in terms of reading the code and setting attributes. Instead of initializing local attributes on the stack and passing pointer to it to dma_set_attr(), just set the bits. 2. It brings safeness and checking for const correctness because the attributes are passed by value. Semantic patches for this change (at least most of them): virtual patch virtual context @r@ identifier f, attrs; @@ f(..., - struct dma_attrs *attrs + unsigned long attrs , ...) { ... } @@ identifier r.f; @@ f(..., - NULL + 0 ) and // Options: --all-includes virtual patch virtual context @r@ identifier f, attrs; type t; @@ t f(..., struct dma_attrs *attrs); @@ identifier r.f; @@ f(..., - NULL + 0 ) Link: http://lkml.kernel.org/r/1468399300-5399-2-git-send-email-k.kozlowski@samsung.com Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Vineet Gupta <vgupta@synopsys.com> Acked-by: Robin Murphy <robin.murphy@arm.com> Acked-by: Hans-Christian Noren Egtvedt <egtvedt@samfundet.no> Acked-by: Mark Salter <msalter@redhat.com> [c6x] Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> [cris] Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> [drm] Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com> Acked-by: Joerg Roedel <jroedel@suse.de> [iommu] Acked-by: Fabien Dessenne <fabien.dessenne@st.com> [bdisp] Reviewed-by: Marek Szyprowski <m.szyprowski@samsung.com> [vb2-core] Acked-by: David Vrabel <david.vrabel@citrix.com> [xen] Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> [xen swiotlb] Acked-by: Joerg Roedel <jroedel@suse.de> [iommu] Acked-by: Richard Kuo <rkuo@codeaurora.org> [hexagon] Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> [m68k] Acked-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> [s390] Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Acked-by: Hans-Christian Noren Egtvedt <egtvedt@samfundet.no> [avr32] Acked-by: Vineet Gupta <vgupta@synopsys.com> [arc] Acked-by: Robin Murphy <robin.murphy@arm.com> [arm64 and dma-iommu] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-03 20:46:00 +00:00
attrs |= DMA_ATTR_NO_KERNEL_MAPPING;
attrs |= DMA_ATTR_WRITE_COMBINE;
/* note that for no-kernel-mapping, the vaddr returned
* is bogus, but non-null if allocation succeeded:
*/
p = dma_alloc_attrs(dev->dev, size,
dma-mapping: use unsigned long for dma_attrs The dma-mapping core and the implementations do not change the DMA attributes passed by pointer. Thus the pointer can point to const data. However the attributes do not have to be a bitfield. Instead unsigned long will do fine: 1. This is just simpler. Both in terms of reading the code and setting attributes. Instead of initializing local attributes on the stack and passing pointer to it to dma_set_attr(), just set the bits. 2. It brings safeness and checking for const correctness because the attributes are passed by value. Semantic patches for this change (at least most of them): virtual patch virtual context @r@ identifier f, attrs; @@ f(..., - struct dma_attrs *attrs + unsigned long attrs , ...) { ... } @@ identifier r.f; @@ f(..., - NULL + 0 ) and // Options: --all-includes virtual patch virtual context @r@ identifier f, attrs; type t; @@ t f(..., struct dma_attrs *attrs); @@ identifier r.f; @@ f(..., - NULL + 0 ) Link: http://lkml.kernel.org/r/1468399300-5399-2-git-send-email-k.kozlowski@samsung.com Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Vineet Gupta <vgupta@synopsys.com> Acked-by: Robin Murphy <robin.murphy@arm.com> Acked-by: Hans-Christian Noren Egtvedt <egtvedt@samfundet.no> Acked-by: Mark Salter <msalter@redhat.com> [c6x] Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> [cris] Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> [drm] Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com> Acked-by: Joerg Roedel <jroedel@suse.de> [iommu] Acked-by: Fabien Dessenne <fabien.dessenne@st.com> [bdisp] Reviewed-by: Marek Szyprowski <m.szyprowski@samsung.com> [vb2-core] Acked-by: David Vrabel <david.vrabel@citrix.com> [xen] Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> [xen swiotlb] Acked-by: Joerg Roedel <jroedel@suse.de> [iommu] Acked-by: Richard Kuo <rkuo@codeaurora.org> [hexagon] Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> [m68k] Acked-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> [s390] Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Acked-by: Hans-Christian Noren Egtvedt <egtvedt@samfundet.no> [avr32] Acked-by: Vineet Gupta <vgupta@synopsys.com> [arc] Acked-by: Robin Murphy <robin.murphy@arm.com> [arm64 and dma-iommu] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-03 20:46:00 +00:00
&priv->vram.paddr, GFP_KERNEL, attrs);
if (!p) {
dev_err(dev->dev, "failed to allocate VRAM\n");
priv->vram.paddr = 0;
return -ENOMEM;
}
dev_info(dev->dev, "VRAM: %08x->%08x\n",
(uint32_t)priv->vram.paddr,
(uint32_t)(priv->vram.paddr + size));
}
return ret;
}
static int msm_drm_init(struct device *dev, struct drm_driver *drv)
{
struct platform_device *pdev = to_platform_device(dev);
struct drm_device *ddev;
struct msm_drm_private *priv;
struct msm_kms *kms;
int ret;
ddev = drm_dev_alloc(drv, dev);
if (IS_ERR(ddev)) {
dev_err(dev, "failed to allocate drm_device\n");
return PTR_ERR(ddev);
}
platform_set_drvdata(pdev, ddev);
priv = kzalloc(sizeof(*priv), GFP_KERNEL);
if (!priv) {
drm_dev_unref(ddev);
return -ENOMEM;
}
ddev->dev_private = priv;
priv->dev = ddev;
ret = msm_mdss_init(ddev);
if (ret) {
kfree(priv);
drm_dev_unref(ddev);
return ret;
}
priv->wq = alloc_ordered_workqueue("msm", 0);
priv->atomic_wq = alloc_ordered_workqueue("msm:atomic", 0);
init_waitqueue_head(&priv->pending_crtcs_event);
INIT_LIST_HEAD(&priv->inactive_list);
INIT_LIST_HEAD(&priv->vblank_ctrl.event_list);
INIT_WORK(&priv->vblank_ctrl.work, vblank_ctrl_worker);
spin_lock_init(&priv->vblank_ctrl.lock);
drm_mode_config_init(ddev);
/* Bind all our sub-components: */
ret = component_bind_all(dev, ddev);
if (ret) {
msm_mdss_destroy(ddev);
kfree(priv);
drm_dev_unref(ddev);
return ret;
}
ret = msm_init_vram(ddev);
if (ret)
goto fail;
msm_gem_shrinker_init(ddev);
switch (get_mdp_ver(pdev)) {
case 4:
kms = mdp4_kms_init(ddev);
priv->kms = kms;
break;
case 5:
kms = mdp5_kms_init(ddev);
break;
default:
kms = ERR_PTR(-ENODEV);
break;
}
if (IS_ERR(kms)) {
/*
* NOTE: once we have GPU support, having no kms should not
* be considered fatal.. ideally we would still support gpu
* and (for example) use dmabuf/prime to share buffers with
* imx drm driver on iMX5
*/
dev_err(dev, "failed to load kms\n");
ret = PTR_ERR(kms);
goto fail;
}
if (kms) {
ret = kms->funcs->hw_init(kms);
if (ret) {
dev_err(dev, "kms hw init failed: %d\n", ret);
goto fail;
}
}
ddev->mode_config.funcs = &mode_config_funcs;
ret = drm_vblank_init(ddev, priv->num_crtcs);
if (ret < 0) {
dev_err(dev, "failed to initialize vblank\n");
goto fail;
}
if (kms) {
pm_runtime_get_sync(dev);
ret = drm_irq_install(ddev, kms->irq);
pm_runtime_put_sync(dev);
if (ret < 0) {
dev_err(dev, "failed to install IRQ handler\n");
goto fail;
}
}
ret = drm_dev_register(ddev, 0);
if (ret)
goto fail;
drm_mode_config_reset(ddev);
#ifdef CONFIG_DRM_FBDEV_EMULATION
if (fbdev)
priv->fbdev = msm_fbdev_init(ddev);
#endif
ret = msm_debugfs_late_init(ddev);
if (ret)
goto fail;
drm_kms_helper_poll_init(ddev);
return 0;
fail:
msm_drm_uninit(dev);
return ret;
}
/*
* DRM operations:
*/
static void load_gpu(struct drm_device *dev)
{
static DEFINE_MUTEX(init_lock);
struct msm_drm_private *priv = dev->dev_private;
mutex_lock(&init_lock);
if (!priv->gpu)
priv->gpu = adreno_load_gpu(dev);
mutex_unlock(&init_lock);
}
static int msm_open(struct drm_device *dev, struct drm_file *file)
{
struct msm_file_private *ctx;
/* For now, load gpu on open.. to avoid the requirement of having
* firmware in the initrd.
*/
load_gpu(dev);
ctx = kzalloc(sizeof(*ctx), GFP_KERNEL);
if (!ctx)
return -ENOMEM;
file->driver_priv = ctx;
return 0;
}
static void msm_postclose(struct drm_device *dev, struct drm_file *file)
{
struct msm_drm_private *priv = dev->dev_private;
struct msm_file_private *ctx = file->driver_priv;
mutex_lock(&dev->struct_mutex);
if (ctx == priv->lastctx)
priv->lastctx = NULL;
mutex_unlock(&dev->struct_mutex);
kfree(ctx);
}
static void msm_lastclose(struct drm_device *dev)
{
struct msm_drm_private *priv = dev->dev_private;
if (priv->fbdev)
drm_fb_helper_restore_fbdev_mode_unlocked(priv->fbdev);
}
static irqreturn_t msm_irq(int irq, void *arg)
{
struct drm_device *dev = arg;
struct msm_drm_private *priv = dev->dev_private;
struct msm_kms *kms = priv->kms;
BUG_ON(!kms);
return kms->funcs->irq(kms);
}
static void msm_irq_preinstall(struct drm_device *dev)
{
struct msm_drm_private *priv = dev->dev_private;
struct msm_kms *kms = priv->kms;
BUG_ON(!kms);
kms->funcs->irq_preinstall(kms);
}
static int msm_irq_postinstall(struct drm_device *dev)
{
struct msm_drm_private *priv = dev->dev_private;
struct msm_kms *kms = priv->kms;
BUG_ON(!kms);
return kms->funcs->irq_postinstall(kms);
}
static void msm_irq_uninstall(struct drm_device *dev)
{
struct msm_drm_private *priv = dev->dev_private;
struct msm_kms *kms = priv->kms;
BUG_ON(!kms);
kms->funcs->irq_uninstall(kms);
}
static int msm_enable_vblank(struct drm_device *dev, unsigned int pipe)
{
struct msm_drm_private *priv = dev->dev_private;
struct msm_kms *kms = priv->kms;
if (!kms)
return -ENXIO;
DBG("dev=%p, crtc=%u", dev, pipe);
return vblank_ctrl_queue_work(priv, pipe, true);
}
static void msm_disable_vblank(struct drm_device *dev, unsigned int pipe)
{
struct msm_drm_private *priv = dev->dev_private;
struct msm_kms *kms = priv->kms;
if (!kms)
return;
DBG("dev=%p, crtc=%u", dev, pipe);
vblank_ctrl_queue_work(priv, pipe, false);
}
/*
* DRM ioctls:
*/
static int msm_ioctl_get_param(struct drm_device *dev, void *data,
struct drm_file *file)
{
struct msm_drm_private *priv = dev->dev_private;
struct drm_msm_param *args = data;
struct msm_gpu *gpu;
/* for now, we just have 3d pipe.. eventually this would need to
* be more clever to dispatch to appropriate gpu module:
*/
if (args->pipe != MSM_PIPE_3D0)
return -EINVAL;
gpu = priv->gpu;
if (!gpu)
return -ENXIO;
return gpu->funcs->get_param(gpu, args->param, &args->value);
}
static int msm_ioctl_gem_new(struct drm_device *dev, void *data,
struct drm_file *file)
{
struct drm_msm_gem_new *args = data;
if (args->flags & ~MSM_BO_FLAGS) {
DRM_ERROR("invalid flags: %08x\n", args->flags);
return -EINVAL;
}
return msm_gem_new_handle(dev, file, args->size,
args->flags, &args->handle);
}
static inline ktime_t to_ktime(struct drm_msm_timespec timeout)
{
return ktime_set(timeout.tv_sec, timeout.tv_nsec);
}
static int msm_ioctl_gem_cpu_prep(struct drm_device *dev, void *data,
struct drm_file *file)
{
struct drm_msm_gem_cpu_prep *args = data;
struct drm_gem_object *obj;
ktime_t timeout = to_ktime(args->timeout);
int ret;
if (args->op & ~MSM_PREP_FLAGS) {
DRM_ERROR("invalid op: %08x\n", args->op);
return -EINVAL;
}
obj = drm_gem_object_lookup(file, args->handle);
if (!obj)
return -ENOENT;
ret = msm_gem_cpu_prep(obj, args->op, &timeout);
drm_gem_object_unreference_unlocked(obj);
return ret;
}
static int msm_ioctl_gem_cpu_fini(struct drm_device *dev, void *data,
struct drm_file *file)
{
struct drm_msm_gem_cpu_fini *args = data;
struct drm_gem_object *obj;
int ret;
obj = drm_gem_object_lookup(file, args->handle);
if (!obj)
return -ENOENT;
ret = msm_gem_cpu_fini(obj);
drm_gem_object_unreference_unlocked(obj);
return ret;
}
static int msm_ioctl_gem_info_iova(struct drm_device *dev,
struct drm_gem_object *obj, uint64_t *iova)
{
struct msm_drm_private *priv = dev->dev_private;
if (!priv->gpu)
return -EINVAL;
return msm_gem_get_iova(obj, priv->gpu->aspace, iova);
}
static int msm_ioctl_gem_info(struct drm_device *dev, void *data,
struct drm_file *file)
{
struct drm_msm_gem_info *args = data;
struct drm_gem_object *obj;
int ret = 0;
if (args->flags & ~MSM_INFO_FLAGS)
return -EINVAL;
obj = drm_gem_object_lookup(file, args->handle);
if (!obj)
return -ENOENT;
if (args->flags & MSM_INFO_IOVA) {
uint64_t iova;
ret = msm_ioctl_gem_info_iova(dev, obj, &iova);
if (!ret)
args->offset = iova;
} else {
args->offset = msm_gem_mmap_offset(obj);
}
drm_gem_object_unreference_unlocked(obj);
return ret;
}
static int msm_ioctl_wait_fence(struct drm_device *dev, void *data,
struct drm_file *file)
{
struct msm_drm_private *priv = dev->dev_private;
struct drm_msm_wait_fence *args = data;
ktime_t timeout = to_ktime(args->timeout);
if (args->pad) {
DRM_ERROR("invalid pad: %08x\n", args->pad);
return -EINVAL;
}
if (!priv->gpu)
return 0;
return msm_wait_fence(priv->gpu->fctx, args->fence, &timeout, true);
}
static int msm_ioctl_gem_madvise(struct drm_device *dev, void *data,
struct drm_file *file)
{
struct drm_msm_gem_madvise *args = data;
struct drm_gem_object *obj;
int ret;
switch (args->madv) {
case MSM_MADV_DONTNEED:
case MSM_MADV_WILLNEED:
break;
default:
return -EINVAL;
}
ret = mutex_lock_interruptible(&dev->struct_mutex);
if (ret)
return ret;
obj = drm_gem_object_lookup(file, args->handle);
if (!obj) {
ret = -ENOENT;
goto unlock;
}
ret = msm_gem_madvise(obj, args->madv);
if (ret >= 0) {
args->retained = ret;
ret = 0;
}
drm_gem_object_unreference(obj);
unlock:
mutex_unlock(&dev->struct_mutex);
return ret;
}
static const struct drm_ioctl_desc msm_ioctls[] = {
DRM_IOCTL_DEF_DRV(MSM_GET_PARAM, msm_ioctl_get_param, DRM_AUTH|DRM_RENDER_ALLOW),
DRM_IOCTL_DEF_DRV(MSM_GEM_NEW, msm_ioctl_gem_new, DRM_AUTH|DRM_RENDER_ALLOW),
DRM_IOCTL_DEF_DRV(MSM_GEM_INFO, msm_ioctl_gem_info, DRM_AUTH|DRM_RENDER_ALLOW),
DRM_IOCTL_DEF_DRV(MSM_GEM_CPU_PREP, msm_ioctl_gem_cpu_prep, DRM_AUTH|DRM_RENDER_ALLOW),
DRM_IOCTL_DEF_DRV(MSM_GEM_CPU_FINI, msm_ioctl_gem_cpu_fini, DRM_AUTH|DRM_RENDER_ALLOW),
DRM_IOCTL_DEF_DRV(MSM_GEM_SUBMIT, msm_ioctl_gem_submit, DRM_AUTH|DRM_RENDER_ALLOW),
DRM_IOCTL_DEF_DRV(MSM_WAIT_FENCE, msm_ioctl_wait_fence, DRM_AUTH|DRM_RENDER_ALLOW),
DRM_IOCTL_DEF_DRV(MSM_GEM_MADVISE, msm_ioctl_gem_madvise, DRM_AUTH|DRM_RENDER_ALLOW),
};
static const struct vm_operations_struct vm_ops = {
.fault = msm_gem_fault,
.open = drm_gem_vm_open,
.close = drm_gem_vm_close,
};
static const struct file_operations fops = {
.owner = THIS_MODULE,
.open = drm_open,
.release = drm_release,
.unlocked_ioctl = drm_ioctl,
.compat_ioctl = drm_compat_ioctl,
.poll = drm_poll,
.read = drm_read,
.llseek = no_llseek,
.mmap = msm_gem_mmap,
};
static struct drm_driver msm_driver = {
.driver_features = DRIVER_HAVE_IRQ |
DRIVER_GEM |
DRIVER_PRIME |
DRIVER_RENDER |
DRIVER_ATOMIC |
DRIVER_MODESET,
.open = msm_open,
.postclose = msm_postclose,
.lastclose = msm_lastclose,
.irq_handler = msm_irq,
.irq_preinstall = msm_irq_preinstall,
.irq_postinstall = msm_irq_postinstall,
.irq_uninstall = msm_irq_uninstall,
.enable_vblank = msm_enable_vblank,
.disable_vblank = msm_disable_vblank,
.gem_free_object = msm_gem_free_object,
.gem_vm_ops = &vm_ops,
.dumb_create = msm_gem_dumb_create,
.dumb_map_offset = msm_gem_dumb_map_offset,
.dumb_destroy = drm_gem_dumb_destroy,
.prime_handle_to_fd = drm_gem_prime_handle_to_fd,
.prime_fd_to_handle = drm_gem_prime_fd_to_handle,
.gem_prime_export = drm_gem_prime_export,
.gem_prime_import = drm_gem_prime_import,
.gem_prime_res_obj = msm_gem_prime_res_obj,
.gem_prime_pin = msm_gem_prime_pin,
.gem_prime_unpin = msm_gem_prime_unpin,
.gem_prime_get_sg_table = msm_gem_prime_get_sg_table,
.gem_prime_import_sg_table = msm_gem_prime_import_sg_table,
.gem_prime_vmap = msm_gem_prime_vmap,
.gem_prime_vunmap = msm_gem_prime_vunmap,
.gem_prime_mmap = msm_gem_prime_mmap,
#ifdef CONFIG_DEBUG_FS
.debugfs_init = msm_debugfs_init,
#endif
.ioctls = msm_ioctls,
.num_ioctls = ARRAY_SIZE(msm_ioctls),
.fops = &fops,
.name = "msm",
.desc = "MSM Snapdragon DRM",
.date = "20130625",
.major = MSM_VERSION_MAJOR,
.minor = MSM_VERSION_MINOR,
.patchlevel = MSM_VERSION_PATCHLEVEL,
};
#ifdef CONFIG_PM_SLEEP
static int msm_pm_suspend(struct device *dev)
{
struct drm_device *ddev = dev_get_drvdata(dev);
drm_kms_helper_poll_disable(ddev);
return 0;
}
static int msm_pm_resume(struct device *dev)
{
struct drm_device *ddev = dev_get_drvdata(dev);
drm_kms_helper_poll_enable(ddev);
return 0;
}
#endif
static const struct dev_pm_ops msm_pm_ops = {
SET_SYSTEM_SLEEP_PM_OPS(msm_pm_suspend, msm_pm_resume)
};
/*
* Componentized driver support:
*/
/*
* NOTE: duplication of the same code as exynos or imx (or probably any other).
* so probably some room for some helpers
*/
static int compare_of(struct device *dev, void *data)
{
return dev->of_node == data;
}
/*
* Identify what components need to be added by parsing what remote-endpoints
* our MDP output ports are connected to. In the case of LVDS on MDP4, there
* is no external component that we need to add since LVDS is within MDP4
* itself.
*/
static int add_components_mdp(struct device *mdp_dev,
struct component_match **matchptr)
{
struct device_node *np = mdp_dev->of_node;
struct device_node *ep_node;
struct device *master_dev;
/*
* on MDP4 based platforms, the MDP platform device is the component
* master that adds other display interface components to itself.
*
* on MDP5 based platforms, the MDSS platform device is the component
* master that adds MDP5 and other display interface components to
* itself.
*/
if (of_device_is_compatible(np, "qcom,mdp4"))
master_dev = mdp_dev;
else
master_dev = mdp_dev->parent;
for_each_endpoint_of_node(np, ep_node) {
struct device_node *intf;
struct of_endpoint ep;
int ret;
ret = of_graph_parse_endpoint(ep_node, &ep);
if (ret) {
dev_err(mdp_dev, "unable to parse port endpoint\n");
of_node_put(ep_node);
return ret;
}
/*
* The LCDC/LVDS port on MDP4 is a speacial case where the
* remote-endpoint isn't a component that we need to add
*/
if (of_device_is_compatible(np, "qcom,mdp4") &&
ep.port == 0)
continue;
/*
* It's okay if some of the ports don't have a remote endpoint
* specified. It just means that the port isn't connected to
* any external interface.
*/
intf = of_graph_get_remote_port_parent(ep_node);
if (!intf)
continue;
drm_of_component_match_add(master_dev, matchptr, compare_of,
intf);
of_node_put(intf);
}
return 0;
}
static int compare_name_mdp(struct device *dev, void *data)
{
return (strstr(dev_name(dev), "mdp") != NULL);
}
static int add_display_components(struct device *dev,
struct component_match **matchptr)
{
struct device *mdp_dev;
int ret;
/*
* MDP5 based devices don't have a flat hierarchy. There is a top level
* parent: MDSS, and children: MDP5, DSI, HDMI, eDP etc. Populate the
* children devices, find the MDP5 node, and then add the interfaces
* to our components list.
*/
if (of_device_is_compatible(dev->of_node, "qcom,mdss")) {
ret = of_platform_populate(dev->of_node, NULL, NULL, dev);
if (ret) {
dev_err(dev, "failed to populate children devices\n");
return ret;
}
mdp_dev = device_find_child(dev, NULL, compare_name_mdp);
if (!mdp_dev) {
dev_err(dev, "failed to find MDSS MDP node\n");
of_platform_depopulate(dev);
return -ENODEV;
}
put_device(mdp_dev);
/* add the MDP component itself */
drm_of_component_match_add(dev, matchptr, compare_of,
mdp_dev->of_node);
} else {
/* MDP4 */
mdp_dev = dev;
}
ret = add_components_mdp(mdp_dev, matchptr);
if (ret)
of_platform_depopulate(dev);
return ret;
}
/*
* We don't know what's the best binding to link the gpu with the drm device.
* Fow now, we just hunt for all the possible gpus that we support, and add them
* as components.
*/
static const struct of_device_id msm_gpu_match[] = {
{ .compatible = "qcom,adreno" },
{ .compatible = "qcom,adreno-3xx" },
{ .compatible = "qcom,kgsl-3d0" },
{ },
};
static int add_gpu_components(struct device *dev,
struct component_match **matchptr)
{
struct device_node *np;
np = of_find_matching_node(NULL, msm_gpu_match);
if (!np)
return 0;
drm_of_component_match_add(dev, matchptr, compare_of, np);
of_node_put(np);
return 0;
}
static int msm_drm_bind(struct device *dev)
{
return msm_drm_init(dev, &msm_driver);
}
static void msm_drm_unbind(struct device *dev)
{
msm_drm_uninit(dev);
}
static const struct component_master_ops msm_drm_ops = {
.bind = msm_drm_bind,
.unbind = msm_drm_unbind,
};
/*
* Platform driver:
*/
static int msm_pdev_probe(struct platform_device *pdev)
{
struct component_match *match = NULL;
int ret;
ret = add_display_components(&pdev->dev, &match);
if (ret)
return ret;
ret = add_gpu_components(&pdev->dev, &match);
if (ret)
return ret;
/* on all devices that I am aware of, iommu's which can map
* any address the cpu can see are used:
*/
ret = dma_set_mask_and_coherent(&pdev->dev, ~0);
if (ret)
return ret;
return component_master_add_with_match(&pdev->dev, &msm_drm_ops, match);
}
static int msm_pdev_remove(struct platform_device *pdev)
{
component_master_del(&pdev->dev, &msm_drm_ops);
of_platform_depopulate(&pdev->dev);
return 0;
}
static const struct of_device_id dt_match[] = {
{ .compatible = "qcom,mdp4", .data = (void *)4 }, /* MDP4 */
{ .compatible = "qcom,mdss", .data = (void *)5 }, /* MDP5 MDSS */
{}
};
MODULE_DEVICE_TABLE(of, dt_match);
static struct platform_driver msm_platform_driver = {
.probe = msm_pdev_probe,
.remove = msm_pdev_remove,
.driver = {
.name = "msm",
.of_match_table = dt_match,
.pm = &msm_pm_ops,
},
};
static int __init msm_drm_register(void)
{
DBG("init");
msm_mdp_register();
msm_dsi_register();
msm_edp_register();
msm_hdmi_register();
adreno_register();
return platform_driver_register(&msm_platform_driver);
}
static void __exit msm_drm_unregister(void)
{
DBG("fini");
platform_driver_unregister(&msm_platform_driver);
msm_hdmi_unregister();
adreno_unregister();
msm_edp_unregister();
msm_dsi_unregister();
msm_mdp_unregister();
}
module_init(msm_drm_register);
module_exit(msm_drm_unregister);
MODULE_AUTHOR("Rob Clark <robdclark@gmail.com");
MODULE_DESCRIPTION("MSM DRM Driver");
MODULE_LICENSE("GPL");