linux/arch/arm/boot/dts
Linus Torvalds 118c9a45fd arm-soc: bug fixes for 3.9-rc5
After a quiet set of fixes for 3.9-rc4, a lot of people woke up and sent
 urgent fixes for 3.9. I pushed back on a number of them that got
 deferred to 3.10, but these are the ones that seemed important.
 
 Regression in 3.9:
 
 - Multiple regressions in OMAP2+ clock cleanup
 - SH-Mobile frame buffer bug fix that merged here because of maintainer MIA
 - ux500 prcmu changes broke DT booting
 - MMCI duplicated regulator setup on ux500
 - New ux500 clock driver broke ethernet on snowball
 - Local interrupt driver for mvebu broke ethernet
 - MVEBU GPIO driver did not get set up right on Orion DT
 - incorrect interrupt number on Orion crypto for DT
 
 Long-standing bugs, including candidates for stable:
 
 - Kirkwood MMC needs to disable invalid card detect pins
 - MV SDIO pinmux was wrong on Mirabox
 - GoFlex Net board file needs to set NAND chip delay
 - MSM timer restart race
 - ep93xx early debug code broke in 3.7
 - i.MX CPU hotplug race
 - Incorrect clock setup for OMAP1 USB
 - Workaround for bad clock setup by some old OMAP4 boot loaders
 - Static I/O mappings on cns3xxx since 3.2
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIVAwUAUVrxWGCrR//JCVInAQLsoQ/+IQKk3v3xOhsvLaPxYjpO1dZqwxmWHwCz
 ujmpnsUabYwuVfVL982k3RTSry5brgOB75CdztOyYsnckF1ZJ3zPjBN+TQM7G/aF
 1lpfUTdCEQFgWFb69G6Lr5ZIDk7co3nRJk1GFS/xi/EAlnmUY/tC1Epco2Y0z0g4
 dWz34sor22lxwWkUTdgXKwynoxmmjBzZIJOhtSOeednVPxN2qUe9IDAy9qk43U3a
 Xg8j4OQT59TTmAZgAB7DLlJ3BGpFvTFAeZ4sDwrCCnibmB5E9LiaYwS9vrk9SQB1
 D8CYIUqcP+cGKnftCCIzgjXHYvJw8fa7NKBUw9CzusIuk+c5AbE28KZRIL4D24Oq
 ImlFV4Neec3Iab6IWfD0+PQK6PkwqnvPd5IBSFO4zUv2adafl7sTASlMnNPZtWbo
 gV+GNVlCyab3l1KYBPo+CQGup3UpIAs5trQoCUh7BRf4HEsL+HILr/SFRQk3GQ6H
 B+3HgSleiipT8n81VDFiWY1o5KuXmjUd2qpbc0a45VtM6EFBONwqBaKew93NkDYa
 oIhI6yS8aIMYPXC6ZP5R2OvKUuL+mypKKXlt9BMCnDG9mrGMks8BLumcHco+Jmkt
 9p6DChibxsaH6QArAi16shFPm0VqFUI6cidgTUcY024bZSiXpBMF52mIu6SEf0/S
 agIwGxpuXFg=
 =oQbL
 -----END PGP SIGNATURE-----

Merge tag 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC bug fixes from Arnd Bergmann:
 "After a quiet set of fixes for 3.9-rc4, a lot of people woke up and
  sent urgent fixes for 3.9.  I pushed back on a number of them that got
  deferred to 3.10, but these are the ones that seemed important.

  Regression in 3.9:

   - Multiple regressions in OMAP2+ clock cleanup
   - SH-Mobile frame buffer bug fix that merged here because of
     maintainer MIA
   - ux500 prcmu changes broke DT booting
   - MMCI duplicated regulator setup on ux500
   - New ux500 clock driver broke ethernet on snowball
   - Local interrupt driver for mvebu broke ethernet
   - MVEBU GPIO driver did not get set up right on Orion DT
   - incorrect interrupt number on Orion crypto for DT

  Long-standing bugs, including candidates for stable:

   - Kirkwood MMC needs to disable invalid card detect pins
   - MV SDIO pinmux was wrong on Mirabox
   - GoFlex Net board file needs to set NAND chip delay
   - MSM timer restart race
   - ep93xx early debug code broke in 3.7
   - i.MX CPU hotplug race
   - Incorrect clock setup for OMAP1 USB
   - Workaround for bad clock setup by some old OMAP4 boot loaders
   - Static I/O mappings on cns3xxx since 3.2"

* tag 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: cns3xxx: fix mapping of private memory region
  arm: mvebu: Fix pinctrl for Armada 370 Mirabox SDIO port.
  arm: orion5x: correct IRQ used in dtsi for mv_cesa
  arm: orion5x: fix orion5x.dtsi gpio parameters
  ARM: Kirkwood: fix unused mvsdio gpio pins
  arm: mvebu: Use local interrupt only for the timer 0
  ARM: kirkwood: Fix chip-delay for GoFlex Net
  ARM: ux500: Enable the clock controlling Ethernet on Snowball
  ARM: ux500: Stop passing ios_handler() as an MMCI power controlling call-back
  ARM: ux500: Apply the TCPM and TCDM locations and sizes to dbx5x0 DT
  fbdev: sh_mobile_lcdc: fixup B side hsync adjust settings
  ARM: OMAP: clocks: Delay clk inits atleast until slab is initialized
  ARM: imx: fix sync issue between imx_cpu_die and imx_cpu_kill
  ARM: msm: Stop counting before reprogramming clockevent
  ARM: ep93xx: Fix wait for UART FIFO to be empty
  ARM: OMAP4: PM: fix PM regression introduced by recent clock cleanup
  ARM: OMAP3: hwmod data: keep MIDLEMODE in force-standby for musb
  ARM: OMAP4: clock data: lock USB DPLL on boot
  ARM: OMAP1: fix USB host on 1710
2013-04-02 08:35:03 -07:00
..
testcases
aks-cdu.dts ARM: at91: Add support for board aks-cdu 2012-07-09 20:45:31 +02:00
am33xx.dtsi ARM: DTS: AM33XX: Add nodes for OCMC RAM and WKUP-M3 2013-02-08 07:26:15 -07:00
am335x-bone.dts Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next 2012-12-12 18:07:07 -08:00
am335x-evm.dts Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next 2012-12-12 18:07:07 -08:00
am335x-evmsk.dts ARM: dts: AM33XX: Add push-buttons device tree data to am335x-evmsk 2012-11-06 15:45:53 +01:00
am3517_mt_ventoux.dts
am3517-evm.dts arm/dts: Add support for TI AM3517/05 EVM board 2012-07-02 01:27:44 -07:00
animeo_ip.dts ARM: at91: Animeo IP: enable watchdog support 2013-02-07 16:40:07 +01:00
armada-370-db.dts arm: mvebu: Add SPI flash on Armada 370 DB board 2013-02-28 18:57:15 +01:00
armada-370-mirabox.dts arm: mvebu: Fix pinctrl for Armada 370 Mirabox SDIO port. 2013-03-28 17:29:23 +00:00
armada-370-rd.dts arm: mvebu: enable the USB ports on Armada 370 Reference Design board 2013-03-08 21:44:30 +00:00
armada-370-xp.dtsi arm: mvebu: fix address-cells in mpic DT node 2013-03-08 22:15:54 +00:00
armada-370.dtsi arm: mvebu: Fix pinctrl for Armada 370 Mirabox SDIO port. 2013-03-28 17:29:23 +00:00
armada-xp-db.dts arm: mvebu: Add SPI flash on Armada XP-DB board 2013-02-28 18:57:15 +01:00
armada-xp-gp.dts arm: mvebu: Add SPI flash on Armada XP-GP board 2013-02-28 18:57:14 +01:00
armada-xp-mv78230.dtsi arm: mvebu: add pin muxing options for the SDIO interface on Armada XP 2013-02-28 18:57:09 +01:00
armada-xp-mv78260.dtsi arm: mvebu: add pin muxing options for the SDIO interface on Armada XP 2013-02-28 18:57:09 +01:00
armada-xp-mv78460.dtsi arm: mvebu: add pin muxing options for the SDIO interface on Armada XP 2013-02-28 18:57:09 +01:00
armada-xp-openblocks-ax3-4.dts arm: mvebu: Enable USB controllers on Armada 370/XP boards 2013-02-28 18:57:13 +01:00
armada-xp.dtsi arm: mvebu: Reduce reg-io-width with UARTs 2013-03-08 22:03:44 +00:00
at91rm9200.dtsi ARM: at91: add EMAC bindings to RM9200 DT 2013-02-07 16:40:09 +01:00
at91rm9200ek.dts ARM: at91: add EMAC bindings to RM9200 DT 2013-02-07 16:40:09 +01:00
at91sam9g15.dtsi arm: at91: dt: at91sam9 add serial pinctrl support 2012-10-13 09:21:44 +08:00
at91sam9g15ek.dts arm: at91: dt: at91sam9 add serial pinctrl support 2012-10-13 09:21:44 +08:00
at91sam9g20.dtsi ARM: dts: add twi nodes for atmel SoCs 2012-09-12 14:49:16 +02:00
at91sam9g20ek_2mmc.dts ARM: at91: dt: add mmc pinctrl for Atmel reference boards 2012-11-20 01:10:27 +08:00
at91sam9g20ek_common.dtsi Sound updates for 3.8-rc1 2012-12-13 11:51:23 -08:00
at91sam9g20ek.dts ARM: at91: add at91sam9g20ek boards dt support 2012-04-20 23:17:05 +08:00
at91sam9g25.dtsi arm: at91: dt: at91sam9 add serial pinctrl support 2012-10-13 09:21:44 +08:00
at91sam9g25ek.dts arm: at91: dt: at91sam9 add serial pinctrl support 2012-10-13 09:21:44 +08:00
at91sam9g35.dtsi arm: at91: dt: at91sam9 add serial pinctrl support 2012-10-13 09:21:44 +08:00
at91sam9g35ek.dts arm: at91: dt: at91sam9 add serial pinctrl support 2012-10-13 09:21:44 +08:00
at91sam9g45.dtsi ARM: at91/dts: add pinctrl support for SSC peripheral 2013-01-12 00:00:23 +00:00
at91sam9m10g45ek.dts ARM: at91: dt: add mmc pinctrl for Atmel reference boards 2012-11-20 01:10:27 +08:00
at91sam9n12.dtsi arm-soc: device tree conversions 2013-02-21 15:38:49 -08:00
at91sam9n12ek.dts ARM: at91: at91sam9n12: add DT parameters to enable PMECC 2013-02-07 16:45:06 +01:00
at91sam9x5.dtsi ARM: at91: dt: at91sam9x5: complete NAND pinctrl 2013-03-13 10:25:24 +01:00
at91sam9x5cm.dtsi ARM: at91: at91sam9x5: add DT parameters to enable PMECC 2013-02-07 16:45:05 +01:00
at91sam9x5ek.dtsi ARM: at91: dt: add mmc pinctrl for Atmel reference boards 2012-11-20 01:10:27 +08:00
at91sam9x25.dtsi ARM: at91sam9: add macb pinctrl support 2012-11-19 06:54:25 +08:00
at91sam9x25ek.dts arm: at91: dt: at91sam9 add serial pinctrl support 2012-10-13 09:21:44 +08:00
at91sam9x35.dtsi arm: at91: dt: at91sam9 add serial pinctrl support 2012-10-13 09:21:44 +08:00
at91sam9x35ek.dts arm: at91: dt: at91sam9 add serial pinctrl support 2012-10-13 09:21:44 +08:00
at91sam9260.dtsi ARM: at91/dts: add pinctrl support for SSC peripheral 2013-01-12 00:00:23 +00:00
at91sam9263.dtsi ARM: at91/dts: add pinctrl support for SSC peripheral 2013-01-12 00:00:23 +00:00
at91sam9263ek.dts ARM: at91: dt: add mmc pinctrl for Atmel reference boards 2012-11-20 01:10:27 +08:00
bcm2835-rpi-b.dts ARM: bcm2835: add I2C controllers to DT 2013-01-14 21:47:09 -07:00
bcm2835.dtsi ARM: bcm2835: fix I2C module clock rate 2013-03-04 17:15:34 -08:00
bcm11351-brt.dts Add support for generic BCM SoC chipsets 2012-11-19 22:39:07 -08:00
bcm11351.dtsi Add support for generic BCM SoC chipsets 2012-11-19 22:39:07 -08:00
ccu9540.dts ARM: ux500: List DT compatibility using platform names rather than by board 2012-11-01 13:02:25 +01:00
cros5250-common.dtsi ARM: dts: correct the dw-mshc timing properties as per binding 2013-01-16 15:45:52 -08:00
da850-enbw-cmc.dts ARM: davinci: add support for am1808 based EnBW CMC board 2012-10-29 15:43:43 +05:30
da850-evm.dts ARM: davinci: da850: add wdt DT node 2013-02-09 22:38:26 +05:30
da850.dtsi ARM: davinci: da850: add wdt DT node 2013-02-09 22:38:26 +05:30
dbx5x0.dtsi ARM: ux500: Apply the TCPM and TCDM locations and sizes to dbx5x0 DT 2013-03-27 20:19:55 +01:00
dove-cm-a510.dts ARM: dove: add device tree descriptors 2012-09-21 17:07:24 +00:00
dove-cubox.dts ARM: Dove: add fixed regulator for CuBox USB power 2013-02-28 18:57:12 +01:00
dove-dove-db.dts ARM: dove: add device tree descriptors 2012-09-21 17:07:24 +00:00
dove.dtsi ARM: Dove: add RTC device node 2013-03-08 21:53:33 +00:00
ea3250.dts ARM: LPC32xx: Extend dts for EA3250 board 2012-09-06 11:40:48 +02:00
ecx-2000.dts ARM: dts: add device_type prop to cpu nodes on Calxeda platforms 2013-01-07 21:08:23 -08:00
ecx-common.dtsi ARM: dts: Add Calxeda ECX-2000 support 2012-10-31 13:46:17 -05:00
elpida_ecb240abacn.dtsi ARM: dts: EMIF and LPDDR2 device tree data for OMAP4 boards 2012-09-07 19:18:40 +02:00
emev2-kzm9d.dts ARM: mach-shmobile: kzm9d: update defconfig 2013-01-15 08:57:09 +09:00
emev2.dtsi ARM: mach-shmobile: emev2: Add reg and device_type properties to cpus 2013-01-29 11:44:59 +09:00
ethernut5.dts Ethernut 5 board support 2012-04-27 23:23:22 +08:00
evk-pro3.dts ARM: at91/dts: evk-pro3: enable watchdog 2012-11-16 15:48:48 +01:00
exynos4.dtsi ARM: EXYNOS: Add #dma-cells for generic dma binding support for PL330 2013-03-07 10:33:07 +09:00
exynos4x12-pinctrl.dtsi ARM: dts: Correct pin configuration of SD 4 for exynos4x12-pinctrl 2013-02-12 10:35:50 -08:00
exynos4x12.dtsi ARM: dts: fix compatible value for exynos pinctrl 2013-01-28 14:27:50 -08:00
exynos4210-origen.dts ARM: dts: Add vmmc fixed voltage regulator for exynos4210-origen 2012-11-22 00:38:56 +09:00
exynos4210-pinctrl.dtsi ARM: dts: Use drive strength 3 for SD pins for exynos4 2012-11-22 00:39:01 +09:00
exynos4210-smdkv310.dts ARM: dts: use uart port1 for console on exynos4210-smdkv310 2012-12-28 09:35:35 -08:00
exynos4210-trats.dts ARM: dts: Remove broken-voltage property from sdhci node for exynos4210-trats 2012-11-20 20:17:20 +09:00
exynos4210.dtsi ARM: dts: fix compatible value for exynos pinctrl 2013-01-28 14:27:50 -08:00
exynos4212.dtsi ARM: dts: Add support for EXYNOS4X12 SoCs 2012-11-07 08:52:25 +09:00
exynos4412-smdk4412.dts ARM: dts: add board dts file for EXYNOS4412 based SMDK board 2012-11-07 09:12:10 +09:00
exynos4412.dtsi ARM: dts: Add support for EXYNOS4X12 SoCs 2012-11-07 08:52:25 +09:00
exynos5250-smdk5250.dts MMC highlights for 3.9: 2013-02-26 09:31:09 -08:00
exynos5250-snow.dts ARM: dts: Add board dts file for Snow board (ARM Chromebook) 2012-11-21 13:32:21 +09:00
exynos5250.dtsi Merge branch 'next' of git://git.infradead.org/users/vkoul/slave-dma 2013-02-26 09:24:48 -08:00
exynos5440-ssdk5440.dts ARM: dts: use uart port0 for console on exynos5440-ssdk5440 2012-12-28 09:35:14 -08:00
exynos5440.dtsi ARM: EXYNOS: Add #dma-cells for generic dma binding support for PL330 2013-03-07 10:33:07 +09:00
ge863-pro3.dtsi ARM: at91: add support for Telit EVK-PRO3 with Telit GE863-PRO3 2012-07-09 20:22:00 +02:00
highbank.dts cpufreq / highbank: add support for highbank cpufreq 2013-02-02 00:01:15 +01:00
href.dtsi mfd: ab8500: Kill "reg" property from binding 2013-03-12 09:39:01 +01:00
hrefprev60.dts ARM: ux500: Move board specific GPIO info out to subordinate DTS files 2012-11-27 10:58:27 +00:00
hrefv60plus.dts mfd: ab8500: Kill "reg" property from binding 2013-03-12 09:39:01 +01:00
imx6dl.dtsi ARM: dts: add dtsi for imx6q and imx6dl 2013-02-10 23:25:47 +08:00
imx6q-arm2.dts ARM: dts: add dtsi for imx6q and imx6dl 2013-02-10 23:25:47 +08:00
imx6q-sabreauto.dts ARM: dts: add dtsi for imx6q and imx6dl 2013-02-10 23:25:47 +08:00
imx6q-sabrelite.dts ARM: dts: add dtsi for imx6q and imx6dl 2013-02-10 23:25:47 +08:00
imx6q-sabresd.dts ARM: dts: add dtsi for imx6q and imx6dl 2013-02-10 23:25:47 +08:00
imx6q.dtsi ARM: dts: add dtsi for imx6q and imx6dl 2013-02-10 23:25:47 +08:00
imx6qdl.dtsi ARM: dts: add dtsi for imx6q and imx6dl 2013-02-10 23:25:47 +08:00
imx23-evk.dts ARM: mxs: Let mmc0 pin detect be generic 2012-08-23 10:01:30 +08:00
imx23-olinuxino.dts ARM: dts: imx23-olinuxino: Fix IOMUX settings 2012-12-25 22:17:59 +08:00
imx23-stmp378x_devb.dts ARM: mxs: Rename 'hog-gpios' 2012-08-23 10:01:11 +08:00
imx23.dtsi ARM: mxs: Add OF props for MX23 LRADC 2013-01-26 10:07:54 +00:00
imx25-karo-tx25.dts ARM: dts: imx25-karo-tx25: Put status entry in the end 2013-02-10 23:25:43 +08:00
imx25-pdk.dts ARM: mx25pdk: Add device tree support 2013-02-10 23:25:42 +08:00
imx25.dtsi ARM: dts: imx: use nodes label in board dts 2013-02-10 23:25:42 +08:00
imx27-apf27.dts ARM: dts: imx: use nodes label in board dts 2013-02-10 23:25:42 +08:00
imx27-pdk.dts ARM: dts: imx: use nodes label in board dts 2013-02-10 23:25:42 +08:00
imx27-phytec-phycore.dts ARM: dts: mx27: Fix the AIPI bus for FEC 2012-12-17 10:49:41 +01:00
imx27.dtsi ARM: dts: mx27: Fix the AIPI bus for FEC 2012-12-17 10:49:41 +01:00
imx28-apf28.dts ARM: mxs: Add support for the Armadeus Systems APF28 module 2012-10-19 16:45:20 +08:00
imx28-apf28dev.dts ARM: mxs: apf28dev: Add I2C and SPI support 2012-11-12 10:07:43 +08:00
imx28-apx4devkit.dts ARM: mxs: Rename 'hog-gpios' 2012-08-23 10:01:11 +08:00
imx28-cfa10036.dts ARM: dts: mxs: add oled support for the cfa-10036 2012-11-22 09:03:40 +08:00
imx28-cfa10037.dts ARM: mxs: dt: Add Crystalfontz CFA-10037 device tree support 2013-01-26 13:40:37 +08:00
imx28-cfa10049.dts ARM: mxs: dts: Add rotary encoder to the CFA-10049 2013-01-31 22:31:19 +08:00
imx28-evk.dts ARM: dts: imx28-evk: Use pinctrl for gpio-led 2012-10-15 10:51:48 +08:00
imx28-m28evk.dts ARM: mxs: Enable touchscreen on m28evk 2013-01-14 08:47:51 +08:00
imx28-sps1.dts ARM: mxs: Add SchulerControl SPS1 DTS file 2012-11-20 22:09:05 +08:00
imx28-tx28.dts ARM: mxs: Rename 'hog-gpios' 2012-08-23 10:01:11 +08:00
imx28.dtsi ARM: dts: mxs: Add muxing options for the third PWM 2013-01-29 18:23:18 +08:00
imx31-bug.dts ARM: dts: imx: use nodes label in board dts 2013-02-10 23:25:42 +08:00
imx31.dtsi ARM: mx31: Replace clk_register_clkdev with clock DT lookup 2013-01-25 11:12:37 +01:00
imx51-apf51.dts ARM: dts: Add apf51 basic support 2013-02-10 23:25:45 +08:00
imx51-babbage.dts ARM i.MX51 babbage: Add keypad support 2013-02-10 23:25:43 +08:00
imx51.dtsi ARM: dts: Add apf51 basic support 2013-02-10 23:25:45 +08:00
imx53-ard.dts ARM: dts: imx: use nodes label in board dts 2013-02-10 23:25:42 +08:00
imx53-evk.dts ARM: dts: imx: use nodes label in board dts 2013-02-10 23:25:42 +08:00
imx53-mba53.dts ARM: dts: imx53-mba53: fix fsl,pins for disp1-grp1 2013-03-04 09:20:15 +08:00
imx53-qsb.dts ARM: dts: imx: use nodes label in board dts 2013-02-10 23:25:42 +08:00
imx53-smd.dts ARM: dts: imx: use nodes label in board dts 2013-02-10 23:25:42 +08:00
imx53-tqma53.dtsi ARM i.MX53: add dts for the TQ tqma53 module 2013-02-10 23:25:44 +08:00
imx53.dtsi ARM: dts: Add device tree entry for onewire master on i.MX53 2013-02-10 23:25:47 +08:00
integrator.dtsi ARM: 7519/1: integrator: convert platform devices to Device Tree 2012-09-17 23:20:23 +01:00
integratorap.dts ARM: integrator: hook the AP into the SoC bus 2012-11-16 22:25:50 +01:00
integratorcp.dts ARM: integrator: hook the CP into the SoC bus 2012-11-16 22:26:07 +01:00
kirkwood-98dx4122.dtsi ARM: Kirkwood: support 98DX412x kirkwoods with pinctrl 2012-11-24 02:58:43 +00:00
kirkwood-6281.dtsi ARM: kirkwood: Convert mplcec4 board to pinctrl 2012-11-24 02:58:52 +00:00
kirkwood-6282.dtsi ARM: Kirkwood: Add pinctrl of NAND to 88f6282 2013-02-28 18:57:11 +01:00
kirkwood-dns320.dts ARM: kirkwood: of_serial: fix clock gating by removing clock-frequency 2013-03-08 21:32:52 +00:00
kirkwood-dns325.dts ARM: kirkwood: of_serial: fix clock gating by removing clock-frequency 2013-03-08 21:32:52 +00:00
kirkwood-dnskw.dtsi ARM: Kirkwood: Convert dnskw to pinctrl 2012-11-24 02:57:56 +00:00
kirkwood-dockstar.dts ARM: kirkwood: of_serial: fix clock gating by removing clock-frequency 2013-03-08 21:32:52 +00:00
kirkwood-dreamplug.dts ARM: kirkwood: of_serial: fix clock gating by removing clock-frequency 2013-03-08 21:32:52 +00:00
kirkwood-goflexnet.dts ARM: kirkwood: Fix chip-delay for GoFlex Net 2013-03-28 16:19:22 +00:00
kirkwood-guruplug-server-plus.dts ARM: kirkwood: convert Guruplug Server Plus to use the device tree 2013-02-28 18:57:07 +01:00
kirkwood-ib62x0.dts ARM: kirkwood: of_serial: fix clock gating by removing clock-frequency 2013-03-08 21:32:52 +00:00
kirkwood-iconnect.dts ARM: kirkwood: of_serial: fix clock gating by removing clock-frequency 2013-03-08 21:32:52 +00:00
kirkwood-iomega_ix2_200.dts ARM: kirkwood: of_serial: fix clock gating by removing clock-frequency 2013-03-08 21:32:52 +00:00
kirkwood-is2.dts ARM: kirkwood: DT board setup for Network Space v2 and parents 2012-11-21 20:58:35 +00:00
kirkwood-km_kirkwood.dts ARM: kirkwood: of_serial: fix clock gating by removing clock-frequency 2013-03-08 21:32:52 +00:00
kirkwood-lschlv2.dts ARM: kirkwood: of_serial: fix clock gating by removing clock-frequency 2013-03-08 21:32:52 +00:00
kirkwood-lsxhl.dts ARM: kirkwood: of_serial: fix clock gating by removing clock-frequency 2013-03-08 21:32:52 +00:00
kirkwood-lsxl.dtsi ARM: Kirkwood: Convert lsxl boards to pinctrl. 2012-11-24 02:58:30 +00:00
kirkwood-mplcec4.dts ARM: kirkwood: of_serial: fix clock gating by removing clock-frequency 2013-03-08 21:32:52 +00:00
kirkwood-ns2-common.dtsi ARM: kirkwood: of_serial: fix clock gating by removing clock-frequency 2013-03-08 21:32:52 +00:00
kirkwood-ns2.dts ARM: kirkwood: DT board setup for Network Space v2 and parents 2012-11-21 20:58:35 +00:00
kirkwood-ns2lite.dts ARM: kirkwood: DT board setup for Network Space Lite v2 2012-11-21 20:58:43 +00:00
kirkwood-ns2max.dts ARM: kirkwood: DT board setup for Network Space v2 and parents 2012-11-21 20:58:35 +00:00
kirkwood-ns2mini.dts ARM: kirkwood: DT board setup for Network Space Mini v2 2012-11-21 20:58:49 +00:00
kirkwood-nsa310.dts ARM: kirkwood: of_serial: fix clock gating by removing clock-frequency 2013-03-08 21:32:52 +00:00
kirkwood-openblocks_a6.dts ARM: kirkwood: of_serial: fix clock gating by removing clock-frequency 2013-03-08 21:32:52 +00:00
kirkwood-topkick.dts ARM: kirkwood: of_serial: fix clock gating by removing clock-frequency 2013-03-08 21:32:52 +00:00
kirkwood-ts219-6281.dts ARM: Kirkwood: Convert TS219 to pinctrl. 2012-11-24 02:57:43 +00:00
kirkwood-ts219-6282.dts ARM: Kirkwood: Convert TS219 to pinctrl. 2012-11-24 02:57:43 +00:00
kirkwood-ts219.dtsi ARM: Kirkwood: Replace mrvl with marvell 2012-07-27 16:50:57 +02:00
kirkwood.dtsi rtc: rtc-mv: Add support for clk to avoid lockups 2013-03-08 21:34:41 +00:00
kizbox.dts ARM: at91/dts: add macb mii pinctrl config for kizbox 2013-01-23 10:34:38 +01:00
lpc32xx.dtsi ARM: LPC32xx: Add the motor PWM to base dts file 2012-11-14 15:41:18 +01:00
Makefile arm-soc: mvebu platform changes 2013-02-28 20:09:24 -08:00
marco-evb.dts ARM: PRIMA2: add CSR SiRFmarco device tree .dts 2013-01-22 19:33:30 +08:00
marco.dtsi ARM: PRIMA2: add CSR SiRFmarco device tree .dts 2013-01-22 19:33:30 +08:00
mmp2-brownstone.dts mfd: max8925: Add dts 2013-02-14 00:23:01 +01:00
mmp2.dtsi mfd: max8925: Add dts 2013-02-14 00:23:01 +01:00
msm8660-surf.dts ARM: msm: Move 8660 to DT timer 2012-09-13 11:14:54 -07:00
msm8960-cdp.dts ARM: msm: Add DT support for 8960 2012-09-13 11:16:47 -07:00
omap2.dtsi ARM: dts: OMAP: Add timer nodes 2012-10-29 16:56:32 +01:00
omap3-beagle-xm.dts ARM: dts: Add omap3-beagle.dts 2012-10-29 16:56:24 +01:00
omap3-beagle.dts ARM: dts: Add omap3-beagle.dts 2012-10-29 16:56:24 +01:00
omap3-evm.dts ARM: dts: omap3: Add gpio-twl4030 properties for BeagleBoard and omap3-EVM 2012-09-07 19:22:44 +02:00
omap3-overo.dtsi ARM: dts: omap3-overo: Add support for the blue LED 2012-09-10 15:44:45 +02:00
omap3-tobi.dts ARM: dts: OMAP3: Add support for Gumstix Overo with Tobi expansion board 2012-09-10 12:07:22 +02:00
omap3.dtsi ARM: dts: OMAP: Add counter-32k nodes 2012-10-29 16:56:33 +01:00
omap4-panda-a4.dts ARM: dts: omap4-panda: Add pinmux configuration for HDMI 2012-11-07 11:50:28 +01:00
omap4-panda-es.dts ARM: dts: omap4-panda: Add pinmux configuration for HDMI 2012-11-07 11:50:28 +01:00
omap4-panda.dts ARM: dts: omap4-panda: Add pinmux configuration for HDMI 2012-11-07 11:50:28 +01:00
omap4-sdp-es23plus.dts ARM: dts: omap4-sdp: Add pinmux configuration for HDMI 2012-11-07 11:50:29 +01:00
omap4-sdp.dts ARM: dts: omap4-sdp: Add pinmux configuration for HDMI 2012-11-07 11:50:29 +01:00
omap4-var-som.dts ARM: dts: OMAP: Rename pandaES and var_som for consistency 2012-10-29 16:56:35 +01:00
omap4.dtsi ARM: dts: OMAP4: Update timer addresses 2012-11-01 17:03:31 +01:00
omap5-evm.dts ARM: dts: omap5-evm: LPDDR2 memory device details for EVM 2012-11-05 18:38:27 +01:00
omap5.dtsi ARM: dts: omap5: EMIF device tree data for OMAP5 boards 2012-11-05 18:38:03 +01:00
omap36xx.dtsi arm/dts: Add omap36xx.dtsi file and rename omap3-beagle to omap3-beagle-xm 2012-09-10 10:34:51 -07:00
omap2420-h4.dts ARM: dts: OMAP2420: Correct H4 board memory size 2012-12-14 14:49:53 -08:00
omap2420.dtsi ARM: dts: OMAP: Add counter-32k nodes 2012-10-29 16:56:33 +01:00
omap2430.dtsi ARM: dts: OMAP: Add counter-32k nodes 2012-10-29 16:56:33 +01:00
orion5x-lacie-ethernet-disk-mini-v2.dts arm: mach-orion5x: fix typo in compatible string of a .dts file 2013-03-08 22:19:42 +00:00
orion5x.dtsi arm: orion5x: correct IRQ used in dtsi for mv_cesa 2013-03-28 17:22:10 +00:00
phy3250.dts ARM: LPC32xx: LED fix in PHY3250 DTS file 2012-09-25 10:11:41 +02:00
picoxcell-pc3x2.dtsi
picoxcell-pc3x3.dtsi
picoxcell-pc7302-pc3x2.dts
picoxcell-pc7302-pc3x3.dts
pm9g45.dts ARM: at91: pm9g45: add mmc support 2012-11-20 01:10:28 +08:00
prima2-evb.dts pinctrl: sirf: add DT-binding pinmux mapping support 2012-09-05 14:48:10 +08:00
prima2.dtsi clk: prima2: enable dt-binding clkdev mapping 2013-01-18 09:44:01 -08:00
pxa2xx.dtsi ARM: pxa: add .dtsi files 2012-08-16 16:15:25 +08:00
pxa3xx.dtsi ARM: pxa: add .dtsi files 2012-08-16 16:15:25 +08:00
pxa27x.dtsi ARM: pxa: add .dtsi files 2012-08-16 16:15:25 +08:00
pxa168-aspenite.dts
pxa168.dtsi ARM: dts: refresh dts file for arch mmp 2012-05-05 16:39:29 +08:00
pxa910-dkb.dts ARM: dts: Enable 88pm860x pmic 2012-10-02 11:43:17 +02:00
pxa910.dtsi MFD bits for the 3.7 merge window. 2012-10-05 12:01:30 +09:00
r8a7740-armadillo800eva.dts Merge branch 'boards' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/boards 2013-01-29 09:02:47 -08:00
r8a7740.dtsi ARM: mach-shmobile: r8a7740 generic board support via DT 2012-07-06 21:03:35 +02:00
samsung_k3pe0e000b.dtsi ARM: dts: omap5-evm: LPDDR2 memory device details for EVM 2012-11-05 18:38:27 +01:00
sh73a0-kzm9g.dts Merge branch 'boards' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/boards 2013-01-29 09:02:47 -08:00
sh73a0-reference.dtsi ARM: mach-shmobile: sh73a0: Initialise MMCIF using DT 2013-01-25 12:43:49 +09:00
sh73a0.dtsi ARM: mach-shmobile: sh73a0: Add reg and device_type properties to cpus 2013-01-29 11:44:54 +09:00
sh7372-mackerel.dts Merge branch 'boards' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/boards 2013-01-29 09:02:47 -08:00
sh7372.dtsi ARM: mach-shmobile: sh7372 generic board support via DT V2 2012-04-11 12:19:31 +02:00
skeleton.dtsi
snowball.dts mfd: ab8500: Kill "reg" property from binding 2013-03-12 09:39:01 +01:00
socfpga_cyclone5.dts arm: socfpga: Add SMP support for actual socfpga harware 2013-02-11 19:37:26 -08:00
socfpga_vt.dts arm: socfpga: Add SMP support for actual socfpga harware 2013-02-11 19:37:26 -08:00
socfpga.dtsi Arm: socfpga: pl330: Add #dma-cells for generic dma binding support 2013-03-11 22:01:57 +01:00
spear3xx.dtsi ARM: SPEAr: DT: Update device nodes 2012-11-26 16:55:28 +05:30
spear13xx.dtsi Revert "ARM: SPEAr13xx: Pass DW DMAC platform data from DT" 2013-02-20 15:48:02 +05:30
spear300-evb.dts ARM: SPEAr: DT: add uart state to fix warning 2012-11-26 15:53:52 +05:30
spear300.dtsi MTD pull for 3.8 2012-12-19 12:47:41 -08:00
spear310-evb.dts ARM: SPEAr: DT: add uart state to fix warning 2012-11-26 15:53:52 +05:30
spear310.dtsi MTD pull for 3.8 2012-12-19 12:47:41 -08:00
spear320-evb.dts ARM: SPEAr: DT: add uart state to fix warning 2012-11-26 15:53:52 +05:30
spear320-hmi.dts ARM: SPEAr320: DT: Add SPEAr 320 HMI board support 2012-11-26 16:55:33 +05:30
spear320.dtsi MTD pull for 3.8 2012-12-19 12:47:41 -08:00
spear600-evb.dts ARM: SPEAr: DT: Update device nodes 2012-11-26 16:55:28 +05:30
spear600.dtsi MTD pull for 3.8 2012-12-19 12:47:41 -08:00
spear1310-evb.dts ARM: SPEAr: DT: Update device nodes 2012-11-26 16:55:28 +05:30
spear1310.dtsi ARM: SPEAr: DT: Update device nodes 2012-11-26 16:55:28 +05:30
spear1340-evb.dts ARM: SPEAr: DT: Update device nodes 2012-11-26 16:55:28 +05:30
spear1340.dtsi Revert "ARM: SPEAr13xx: Pass DW DMAC platform data from DT" 2013-02-20 15:48:02 +05:30
ste-nomadik-s8815.dts ARM: nomadik: migrate MMC/SD card support to device tree 2013-01-28 23:24:40 +01:00
ste-nomadik-stn8815.dtsi ARM: nomadik: add I2C devices to the device tree 2013-01-28 23:24:41 +01:00
stuib.dtsi ARM: ux500: Change the type of interrupt to something compatible 2012-11-01 13:02:26 +01:00
sun4i-a10-cubieboard.dts Revert "sunxi: a10-cubieboard: Add user LEDs to the device tree" 2013-02-19 22:27:28 +01:00
sun4i-a10-hackberry.dts ARM: sunxi: Add device tree for Miniand Hackberry 2013-01-08 19:46:19 +01:00
sun4i-a10.dtsi ARM: sunxi: Add the pin groups for UART0 and UART1 on sun4i 2013-02-01 10:48:11 +01:00
sun5i-a13-olinuxino.dts Revert "sunxi: a13-olinuxino: Add user LED to the device tree" 2013-02-19 22:26:42 +01:00
sun5i-a13.dtsi ARM: sunxi: Add uart1 pinctrl groups 2013-01-22 13:51:37 +01:00
sunxi.dtsi ARM: sunxi: Use the Synosys APB UART instead of ns8250 2013-01-16 19:13:18 +01:00
tegra20-colibri-512.dtsi ARM: tegra: Add Colibri T20 512MB COM device tree 2013-01-28 11:24:09 -07:00
tegra20-harmony.dts ARM: tegra: device tree updates 2013-02-05 13:19:11 -08:00
tegra20-iris-512.dts ARM: tegra: Add Toradex Iris carrier board DT with T20 512MB COM 2013-01-28 11:24:09 -07:00
tegra20-medcom-wide.dts ARM: tegra: Add Avionic Design Medcom-Wide support 2012-09-20 09:34:00 -06:00
tegra20-paz00.dts ARM: tegra: device tree updates 2013-02-05 13:19:11 -08:00
tegra20-plutux.dts ARM: tegra: plutux: Enable HDMI output 2012-11-16 09:17:08 -07:00
tegra20-seaboard.dts ARM: tegra: device tree updates 2013-02-05 13:19:11 -08:00
tegra20-tamonten.dtsi ARM: tegra: move serial clock-frequency attr into the Tegra20 dtsi 2013-01-28 11:24:09 -07:00
tegra20-tec.dts ARM: tegra: tec: Enable HDMI output 2012-11-16 09:17:09 -07:00
tegra20-trimslice.dts ARM: tegra: device tree updates 2013-02-05 13:19:11 -08:00
tegra20-ventana.dts ARM: tegra: device tree updates 2013-02-05 13:19:11 -08:00
tegra20-whistler.dts ARM: tegra: move serial clock-frequency attr into the Tegra20 dtsi 2013-01-28 11:24:09 -07:00
tegra20.dtsi ARM: tegra: fix register address of slink controller 2013-03-22 21:30:16 +01:00
tegra30-beaver.dts ARM: tegra: move serial clock-frequency attr into the Tegra30 dtsi 2013-01-28 11:24:09 -07:00
tegra30-cardhu-a02.dts ARM: dt: t30 cardhu: set pinmux and power for wlan 2012-11-15 15:07:28 -07:00
tegra30-cardhu-a04.dts ARM: dt: t30 cardhu: set pinmux and power for wlan 2012-11-15 15:07:28 -07:00
tegra30-cardhu.dtsi ARM: tegra: move serial clock-frequency attr into the Tegra30 dtsi 2013-01-28 11:24:09 -07:00
tegra30.dtsi ARM: tegra: fix register address of slink controller 2013-03-22 21:30:16 +01:00
tegra114-dalmore.dts ARM: dt: tegra114: Add new board, Dalmore 2013-01-28 11:23:08 -07:00
tegra114-pluto.dts ARM: dt: tegra114: Add new board, Pluto 2013-01-28 11:23:11 -07:00
tegra114.dtsi ARM: DT: tegra114: add pinmux DT entry 2013-01-29 11:02:15 -07:00
tny_a9g20.dts arm: at91: add Calao TNY-A9260 and TNY-A9G20 board support 2012-04-20 23:17:00 +08:00
tny_a9260_common.dtsi arm: at91: add Calao TNY-A9260 and TNY-A9G20 board support 2012-04-20 23:17:00 +08:00
tny_a9260.dts arm: at91: add Calao TNY-A9260 and TNY-A9G20 board support 2012-04-20 23:17:00 +08:00
tny_a9263.dts ARM: at91: DT: add Calao TNY A9263 board support 2012-04-20 23:17:30 +08:00
tps65217.dtsi arm/dts: regulator: Add tps65217 device tree data 2012-08-30 13:59:17 -07:00
tps65910.dtsi arm/dts: regulator: Add tps65910 device tree data 2012-08-30 13:57:53 -07:00
twl4030.dtsi watchdog: twl4030_wdt: add DT support 2013-01-02 12:07:05 +01:00
twl6030.dtsi ARM: dts: Add twl6030-usb data 2012-10-29 16:56:29 +01:00
u9540.dts ARM: ux500: Enable all MMC devices on the u9540 when booting with DT 2012-11-20 16:10:46 +00:00
usb_a9g20-dab-mmx.dtsi
usb_a9g20.dts ARM: at91: Calao USB A926x factorize common binding in usb_a9260_common 2012-04-20 23:17:11 +08:00
usb_a9260_common.dtsi ARM: at91: Calao USB A926x factorize common binding in usb_a9260_common 2012-04-20 23:17:11 +08:00
usb_a9260.dts ARM: at91: DT: add Calao USB A9260 DT support 2012-04-20 23:17:15 +08:00
usb_a9263.dts ARM: at91: DT: add Calao USB A9263 board support 2012-04-20 23:17:27 +08:00
versatile-ab.dts ARM: 7390/1: dts: versatile-pb/ab fix MMC IRQs 2012-04-23 15:46:15 +01:00
versatile-pb.dts ARM: 7390/1: dts: versatile-pb/ab fix MMC IRQs 2012-04-23 15:46:15 +01:00
vexpress-v2m-rs1.dtsi ARM: vexpress: Remove motherboard dependencies in the DTS files 2012-11-05 17:09:52 +00:00
vexpress-v2m.dtsi ARM: vexpress: Remove motherboard dependencies in the DTS files 2012-11-05 17:09:52 +00:00
vexpress-v2p-ca5s.dts ARM: vexpress: Remove motherboard dependencies in the DTS files 2012-11-05 17:09:52 +00:00
vexpress-v2p-ca9.dts ARM: vexpress: Remove motherboard dependencies in the DTS files 2012-11-05 17:09:52 +00:00
vexpress-v2p-ca15_a7.dts ARM: vexpress: Fix wdt interrupt in ca15{-tc1,_a7} dts 2013-01-29 18:20:28 +00:00
vexpress-v2p-ca15-tc1.dts ARM: vexpress: Fix wdt interrupt in ca15{-tc1,_a7} dts 2013-01-29 18:20:28 +00:00
vt8500-bv07.dts arm: vt8500: Add device tree files for VIA/Wondermedia SoC's 2012-09-21 19:23:54 +12:00
vt8500.dtsi serial: vt8500: UART uses gated clock rather than 24Mhz reference 2013-01-17 18:54:32 -08:00
wm8505-ref.dts arm: vt8500: Add device tree files for VIA/Wondermedia SoC's 2012-09-21 19:23:54 +12:00
wm8505.dtsi serial: vt8500: UART uses gated clock rather than 24Mhz reference 2013-01-17 18:54:32 -08:00
wm8650-mid.dts arm: vt8500: Add device tree files for VIA/Wondermedia SoC's 2012-09-21 19:23:54 +12:00
wm8650.dtsi serial: vt8500: UART uses gated clock rather than 24Mhz reference 2013-01-17 18:54:32 -08:00
wm8850-w70v2.dts dts: vt8500: Add initial dts support for WM8850 2013-01-21 23:20:08 -08:00
wm8850.dtsi dts: vt8500: Add initial dts support for WM8850 2013-01-21 23:20:08 -08:00
xenvm-4.2.dts arm: introduce a DTS for Xen unprivileged virtual machines 2012-09-24 16:40:52 +00:00
zynq-7000.dtsi serial: xilinx_uartps: Get clock rate info from dts 2013-01-21 13:56:46 -08:00
zynq-zc702.dts ARM: zynq: add clk binding support to the ttc 2012-11-14 16:10:42 +01:00