The function rb_reserved_next_event() is called by two functions:
ring_buffer_lock_reserve() and ring_buffer_write(). This is in a very hot
path of the tracing code, and it is best that they are not functions. The
two callers are basically wrapers for rb_reserver_next_event(). Removing the
function calls can save execution time in the hotpath of tracing.
Link: http://lkml.kernel.org/r/20161121183700.GW26852@two.firstfloor.org
Reported-by: Andi Kleen <andi@firstfloor.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
As Andi Kleen pointed out in the Link below, the trace events has quite a
bit of code execution. A lot of that happens to be calling functions, where
some of them should simply be inlined. One of these functions happens to be
trace_buffer_lock_reserve() which is also a global, but it is used
throughout the file it is defined in. Create a __trace_buffer_lock_reserve()
that is always inlined that the file can benefit from.
Link: http://lkml.kernel.org/r/20161121183700.GW26852@two.firstfloor.org
Reported-by: Andi Kleen <andi@firstfloor.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The creation of the set_event_pid file was assigned to a variable "entry"
but that variable was never used. Ideally, it should be used to check if the
file was created and warn if it was not.
The files header_page, header_event should also be checked and a warning if
they fail to be created.
The "enable" file was moved up, as it is a more crucial file to have and a
hard failure (return -ENOMEM) should be returned if it is not created.
Reported-by: David Binderman <dcb314@hotmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
If CONFIG_STM_SOURCE_FTRACE is selected, Function trace data can be
writen to sink via STM, all functions that related to writing data
packets to STM should be marked 'notrace' to avoid being traced by
Ftrace, otherwise the program would stall into an endless loop.
Link: http://lkml.kernel.org/r/1479715043-6534-7-git-send-email-zhang.chunyan@linaro.org
Signed-off-by: Chunyan Zhang <zhang.chunyan@linaro.org>
Acked-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
If CONFIG_STM_SOURCE_FTRACE is selected, Function trace data can be
writen to sink via STM, all functions that related to writing data
packets to STM should be marked 'notrace' to avoid being traced by
Ftrace, otherwise the program would stall into an endless loop.
Link: http://lkml.kernel.org/r/1479715043-6534-6-git-send-email-zhang.chunyan@linaro.org
Signed-off-by: Chunyan Zhang <zhang.chunyan@linaro.org>
Acked-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
If CONFIG_STM_SOURCE_FTRACE is selected, Function trace data can be
writen to sink via STM, all functions that related to writing data
packets to STM should be marked 'notrace' to avoid being traced by
Ftrace, otherwise the program would stall into an endless loop.
Link: http://lkml.kernel.org/r/1479715043-6534-5-git-send-email-zhang.chunyan@linaro.org
Signed-off-by: Chunyan Zhang <zhang.chunyan@linaro.org>
Acked-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
If CONFIG_STM_SOURCE_FTRACE is selected, Function trace data can be
writen to sink via STM, all functions that related to writing data
packets to STM should be marked 'notrace' to avoid being traced by
Ftrace, otherwise the program would stall into an endless loop.
Link: http://lkml.kernel.org/r/1479715043-6534-4-git-send-email-zhang.chunyan@linaro.org
Signed-off-by: Chunyan Zhang <zhang.chunyan@linaro.org>
Acked-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
This patch adds a driver that models itself as an stm_source called
stm_ftrace. Once the stm device and stm_ftrace have been linked via
sysfs, the driver registers itself as a trace_export and everything
passed to the interface from Ftrace subsystem will end up in the STM
trace engine.
Link: http://lkml.kernel.org/r/1479715043-6534-3-git-send-email-zhang.chunyan@linaro.org
Signed-off-by: Chunyan Zhang <zhang.chunyan@linaro.org>
Acked-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Currently Function traces can be only exported to the ring buffer. This
adds a trace_export concept which can process traces and export
them to a registered destination as an addition to the current
one that outputs to Ftrace - i.e. ring buffer.
In this way, if we want function traces to be sent to other destinations
rather than only to the ring buffer, we just need to register a new
trace_export and implement its own .write() function for writing traces to
storage.
With this patch, only function tracing (trace type is TRACE_FN)
is supported.
Link: http://lkml.kernel.org/r/1479715043-6534-2-git-send-email-zhang.chunyan@linaro.org
Signed-off-by: Chunyan Zhang <zhang.chunyan@linaro.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Add a testcase for types of kprobe event. This checks
kprobe event can accept and correctly expressed the
arguments typed as s32, u32, x32 and bitfield.
Here is the test result.
-----
# ./ftracetest test.d/kprobe/kprobe_args_type.tc
=== Ftrace unit tests ===
[1] Kprobes event arguments with types [PASS]
# of passed: 1
# of failed: 0
# of unresolved: 0
# of untested: 0
# of unsupported: 0
# of xfailed: 0
# of undefined(test bug): 0
-----
Link: http://lkml.kernel.org/r/147928409063.22982.3499119203875115458.stgit@devbox
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Add function filter glob matching test case.
This checks whether the kernel supports glob matching
(front match, end match, middle match, side match,
character class and '?').
Here is the test result.
-----
./ftracetest test.d/ftrace/func-filter-glob.tc
=== Ftrace unit tests ===
[1] ftrace - function glob filters [PASS]
# of passed: 1
# of failed: 0
# of unresolved: 0
# of untested: 0
# of unsupported: 0
# of xfailed: 0
# of undefined(test bug): 0
-----
Link: http://lkml.kernel.org/r/147928407589.22982.16364174511117104303.stgit@devbox
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Introduce TMPDIR variable which is removed after each test
is done, so that the test script can put their temporary
files in that.
Link: http://lkml.kernel.org/r/147928406116.22982.8761924340108532378.stgit@devbox
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Since histogram trigger id.syscall depends on CONFIG_FTRACE_SYSCALLS,
a testcase in trigger-modifier test fails if that config is disabled.
Fix this bug by using flexible pattern to check the histogram output.
Link: http://lkml.kernel.org/r/147928402670.22982.15589445159052676877.stgit@devbox
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
If "snapshot" special file doesn't exist, that kernel does
not support snapshot and snapshot trigger too. In that case
snapshot trigger test results to unsupported instead of fail.
Link: http://lkml.kernel.org/r/147928401215.22982.10411665829041109794.stgit@devbox
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Reset ftrace to initial state before running each test.
This fixes some test cases to enable tracing before starting
trace test. This can avoid false-positive failure when
previous testcase fails while disabling tracing.
Link: http://lkml.kernel.org/r/147928398192.22982.7767460638302113002.stgit@devbox
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
A new file is created:
/sys/kernel/debug/tracing/trace_marker_raw
This allows for appications to create data structures and write the binary
data directly into it, and then read the trace data out from trace_pipe_raw
into the same type of data structure. This saves on converting numbers into
ASCII that would be required by trace_marker.
Suggested-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
In similar spirit to x86 and arm64 support, add a make_nop_arm()
to replace calls to mcount with a nop in sections that aren't
traced.
Link: http://lkml.kernel.org/r/20161018234200.5804-1-sboyd@codeaurora.org
Acked-by: Russell King <rmk+kernel@armlinux.org.uk>
Acked-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The trace_events_file.c filter logic can be a bit complex. I copy this into
a userspace program where I can debug it a bit easier. One issue is the op
is defined in most places as an int instead of as an enum, and gdb just
gives the value when debugging. Having the actual op name shown in gdb is
more useful.
This has no functionality change, but helps in debugging when the file is
debugged in user space.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Currently the filter logic for comparisons (like greater-than and less-than)
are used, they share the same function and a switch statement is used to
jump to the comparison type to perform. This is done in the extreme hot path
of the tracing code, and it does not take much more space to create a
unique comparison function to perform each type of comparison and remove the
switch statement.
Also, a bug was found where the binary and operation for 64 bits could fail
if the resulting bits were greater than 32 bits, because the result was
passed into a 32 bit variable. This was fixed when adding the separate
binary and function.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Use glob_match() to support flexible glob wildcards (*,?)
and character classes ([) for ftrace.
Since the full glob matching is slower than the current
partial matching routines(*pat, pat*, *pat*), this leaves
those routines and just add MATCH_GLOB for complex glob
expression.
e.g.
----
[root@localhost tracing]# echo 'sched*group' > set_ftrace_filter
[root@localhost tracing]# cat set_ftrace_filter
sched_free_group
sched_change_group
sched_create_group
sched_online_group
sched_destroy_group
sched_offline_group
[root@localhost tracing]# echo '[Ss]y[Ss]_*' > set_ftrace_filter
[root@localhost tracing]# head set_ftrace_filter
sys_arch_prctl
sys_rt_sigreturn
sys_ioperm
SyS_iopl
sys_modify_ldt
SyS_mmap
SyS_set_thread_area
SyS_get_thread_area
SyS_set_tid_address
sys_fork
----
Link: http://lkml.kernel.org/r/147566869501.29136.6462645009894738056.stgit@devbox
Acked-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
When a module is first loaded and its function ip records are added to the
ftrace list of functions to modify, they are set to DISABLED, as their text
is still in a read only state. When the module is fully loaded, and can be
updated, the flag is cleared, and if their's any functions that should be
tracing them, it is updated at that moment.
But there's several locations that do record accounting and should ignore
records that are marked as disabled, or they can cause issues.
Alexei already fixed one location, but others need to be addressed.
Cc: stable@vger.kernel.org
Fixes: b7ffffbb46 "ftrace: Add infrastructure for delayed enabling of module functions"
Reported-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
ftrace_shutdown() checks for sanity of ftrace records
and if dyn_ftrace->flags is not zero, it will warn.
It can happen that 'flags' are set to FTRACE_FL_DISABLED at this point,
since some module was loaded, but before ftrace_module_enable()
cleared the flags for this module.
In other words the module.c is doing:
ftrace_module_init(mod); // calls ftrace_update_code() that sets flags=FTRACE_FL_DISABLED
... // here ftrace_shutdown() is called that warns, since
err = prepare_coming_module(mod); // didn't have a chance to clear FTRACE_FL_DISABLED
Fix it by ignoring disabled records.
It's similar to what __ftrace_hash_rec_update() is already doing.
Link: http://lkml.kernel.org/r/1478560460-3818619-1-git-send-email-ast@fb.com
Cc: stable@vger.kernel.org
Fixes: b7ffffbb46 "ftrace: Add infrastructure for delayed enabling of module functions"
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
wait for next week.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQExBAABCAAbBQJYJvAXFBxwYm9uemluaUByZWRoYXQuY29tAAoJEL/70l94x66D
ztUH/3DZVYkVYUea+Sk1mBnLaK5cbEJMGtxV/NsAqwz8rYB981cB5Iqw0+f2HX2G
LWLc0cf/kyUH+6TrFxQFyXLsBvV7xku2YwJdoiRutpR50767qPFPaPUBHcxCYPYR
MI4VSXb1hW0c4rd8409HesKv5qc5BiYjdWKPMu+f1LUF2CED+Xq4SWHVg+CwSE8i
UInvFUlj/ejQlSdxN2piv87SRcMuO+4nzP+JbtyN7onvtLIah6JfvHhlOO6em+0c
KX1G3qQ6fth6jewTdOPUB1Tx8CoEAZ+YLieRQA19vGHVI4eIhofDgtSaPZJmu9G7
0kjbrlqAuViTEsRl7Dx8zT8OpBM=
=N6w9
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM fixes from Paolo Bonzini:
"ARM fixes. There are a couple pending x86 patches but they'll have to
wait for next week"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: arm/arm64: vgic: Kick VCPUs when queueing already pending IRQs
KVM: arm/arm64: vgic: Prevent access to invalid SPIs
arm/arm64: KVM: Perform local TLB invalidation when multiplexing vcpus on a single CPU
Merge media fixes from Mauro Carvalho Chehab:
"This contains two patches fixing problems with my patch series meant
to make USB drivers to work again after the DMA on stack changes.
The last patch on this series is actually not related to DMA on stack.
It solves a longstanding bug affecting module unload, causing
module_put() to be called twice. It was reported by the user who
reported and tested the issues with the gp8psk driver with the DMA
fixup patches. As we're late at -rc cycle, maybe you prefer to not
apply it right now. If this is the case, I'll add to the pile of
patches for 4.10.
Exceptionally this time, I'm sending the patches via e-mail, because
I'm on another trip, and won't be able to use the usual procedure
until Monday. Also, it is only three patches, and you followed already
the discussions about the first one"
* emailed patches from Mauro Carvalho Chehab <mchehab@osg.samsung.com>:
gp8psk: Fix DVB frontend attach
gp8psk: fix gp8psk_usb_in_op() logic
dvb-usb: move data_mutex to struct dvb_usb_device
Here are three small driver fixes for some reported issues for 4.9-rc5.
One for the hyper-v subsystem, fixing up a naming issue that showed up
in 4.9-rc1, one mei driver fix, and one fix for parallel ports,
resolving a reported regression.
All have been in linux-next with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iFYEABECABYFAlgoKqEPHGdyZWdAa3JvYWguY29tAAoJEDFH1A3bLfspfrQAn1Iu
P/DG1uz25y0AXp9GiOC93ONmAJwPMbzE0HYqDiq6Ldb0btP2KeFQKQ==
=rLdD
-----END PGP SIGNATURE-----
Merge tag 'char-misc-4.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc fixes from Greg KH:
"Here are three small driver fixes for some reported issues for
4.9-rc5.
One for the hyper-v subsystem, fixing up a naming issue that showed up
in 4.9-rc1, one mei driver fix, and one fix for parallel ports,
resolving a reported regression.
All have been in linux-next with no reported issues"
* tag 'char-misc-4.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
ppdev: fix double-free of pp->pdev->name
vmbus: make sysfs names consistent with PCI
mei: bus: fix received data size check in NFC fixup
Here are two driver core fixes for 4.9-rc5.
The first resolves an issue with some drivers not liking to be unbound
and bound again (if CONFIG_DEBUG_TEST_DRIVER_REMOVE is enabled), which
solves some reported problems with graphics and storage drivers. The
other resolves a smatch error with the 4.9-rc1 driver core changes
around this feature.
Both have been in linux-next with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iFYEABECABYFAlgoLEcPHGdyZWdAa3JvYWguY29tAAoJEDFH1A3bLfspP1EAn1Du
ApNAA8R5xV4dwjlXrPkUy6bbAKCBo8o29mnUw4/SN75ipl+ACoDC4g==
=MM3q
-----END PGP SIGNATURE-----
Merge tag 'driver-core-4.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core fixes from Greg KH:
"Here are two driver core fixes for 4.9-rc5.
The first resolves an issue with some drivers not liking to be unbound
and bound again (if CONFIG_DEBUG_TEST_DRIVER_REMOVE is enabled), which
solves some reported problems with graphics and storage drivers. The
other resolves a smatch error with the 4.9-rc1 driver core changes
around this feature.
Both have been in linux-next with no reported issues"
* tag 'driver-core-4.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
driver core: fix smatch warning on dev->bus check
driver core: skip removal test for non-removable drivers
Here are a few small staging and iio driver fixes for reported issues.
The last one was cherry-picked from my -next branch to resolve a build
warning that Arnd fixed, in his quest to be able to turn
-Wmaybe-uninitialized back on again. That patch, and all of the others,
have been in linux-next for a while with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iFYEABECABYFAlgoPA4PHGdyZWdAa3JvYWguY29tAAoJEDFH1A3bLfspzgIAn0/6
6/P+FYstL3zexr0+xGqcHU/XAJ4p8HJjH9CX8SBHWaMa+KCyPQs6wQ==
=L1Nv
-----END PGP SIGNATURE-----
Merge tag 'staging-4.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging/IIO fixes from Grek KH:
"Here are a few small staging and iio driver fixes for reported issues.
The last one was cherry-picked from my -next branch to resolve a build
warning that Arnd fixed, in his quest to be able to turn
-Wmaybe-uninitialized back on again. That patch, and all of the
others, have been in linux-next for a while with no reported issues"
* tag 'staging-4.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
iio: maxim_thermocouple: detect invalid storage size in read()
staging: nvec: remove managed resource from PS2 driver
Revert "staging: nvec: ps2: change serio type to passthrough"
drivers: staging: nvec: remove bogus reset command for PS/2 interface
staging: greybus: arche-platform: fix device reference leak
staging: comedi: ni_tio: fix buggy ni_tio_clock_period_ps() return value
staging: sm750fb: Fix bugs introduced by early commits
iio: hid-sensors: Increase the precision of scale to fix wrong reading interpretation.
iio: orientation: hid-sensor-rotation: Add PM function (fix non working driver)
iio: st_sensors: fix scale configuration for h3lis331dl
staging: iio: ad5933: avoid uninitialized variable in error case
Here are a number of small USB and PHY driver fixes for 4.9-rc5
Nothing major, just small fixes for reported issues, all of these have
been in linux-next for a while with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iFYEABECABYFAlgoPRQPHGdyZWdAa3JvYWguY29tAAoJEDFH1A3bLfsp+dQAn282
ftF8+1ZsZ4uyGdKNO101cSayAKCYezCi0MB+/aPIdgzBt0Z7EnA/wg==
=aW8R
-----END PGP SIGNATURE-----
Merge tag 'usb-4.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / PHY fixes from Greg KH:
"Here are a number of small USB and PHY driver fixes for 4.9-rc5
Nothing major, just small fixes for reported issues, all of these have
been in linux-next for a while with no reported issues"
* tag 'usb-4.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
USB: cdc-acm: fix TIOCMIWAIT
cdc-acm: fix uninitialized variable
drivers/usb: Skip auto handoff for TI and RENESAS usb controllers
usb: musb: remove duplicated actions
usb: musb: da8xx: Don't print phy error on -EPROBE_DEFER
phy: sun4i: check PMU presence when poking unknown bit of pmu
phy-rockchip-pcie: remove deassert of phy_rst from exit callback
phy: da8xx-usb: rename the ohci device to ohci-da8xx
phy: Add reset callback for not generic phy
uwb: fix device reference leaks
usb: gadget: u_ether: remove interrupt throttling
usb: dwc3: st: add missing <linux/pinctrl/consumer.h> include
usb: dwc3: Fix error handling for core init
Pull more block fixes from Jens Axboe:
"Since I mistakenly left out the lightnvm regression fix yesterday and
the aoeblk seems adequately tested at this point, might as well send
out another pull to make -rc5"
* 'for-linus' of git://git.kernel.dk/linux-block:
aoe: fix crash in page count manipulation
lightnvm: invalid offset calculation for lba_shift
The megaraid_sas patch in here fixes a major regression in the last
fix set that made all megaraid_sas cards unusable. It turns out
no-one had actually tested such an "obvious" fix, sigh. The fix for
the fix has been tested ...
The next most serious is the vmw_pvscsi abort problem which basically
means that aborts don't work on the vmware paravirt devices and error
handling always escalates to reset.
The rest are an assortment of missed reference counting in certain
paths and corner case bugs that show up on some architectures.
Signed-off-by: James E.J. Bottomley <jejb@linux.vnet.ibm.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=pp9Y
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"The megaraid_sas patch in here fixes a major regression in the last
fix set that made all megaraid_sas cards unusable. It turns out no-one
had actually tested such an "obvious" fix, sigh. The fix for the fix
has been tested ...
The next most serious is the vmw_pvscsi abort problem which basically
means that aborts don't work on the vmware paravirt devices and error
handling always escalates to reset.
The rest are an assortment of missed reference counting in certain
paths and corner case bugs that show up on some architectures"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: megaraid_sas: fix macro MEGASAS_IS_LOGICAL to avoid regression
scsi: qla2xxx: fix invalid DMA access after command aborts in PCI device remove
scsi: qla2xxx: do not queue commands when unloading
scsi: libcxgbi: fix incorrect DDP resource cleanup
scsi: qla2xxx: Fix scsi scan hang triggered if adapter fails during init
scsi: scsi_dh_alua: Fix a reference counting bug
scsi: vmw_pvscsi: return SUCCESS for successful command aborts
scsi: mpt3sas: Fix for block device of raid exists even after deleting raid disk
scsi: scsi_dh_alua: fix missing kref_put() in alua_rtpg_work()
anything in the core framework here, just driver fixes. There's a boot fix for
Samsung devices and a safety measure for qoriq to prevent CPUs from running too
fast. There's also a fix for i.MX6Q to properly handle audio clock rates. We
also have some "that's obviously wrong" fixes like bad NULL pointer checks in
the MPP driver and a poor usage of __pa in the xgene clk driver that are fixed
here.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=vic+
-----END PGP SIGNATURE-----
Merge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fixes from Stephen Boyd:
"The typical collection of minor bug fixes in clk drivers. We don't
have anything in the core framework here, just driver fixes.
There's a boot fix for Samsung devices and a safety measure for qoriq
to prevent CPUs from running too fast. There's also a fix for i.MX6Q
to properly handle audio clock rates. We also have some "that's
obviously wrong" fixes like bad NULL pointer checks in the MPP driver
and a poor usage of __pa in the xgene clk driver that are fixed here"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: mmp: pxa910: fix return value check in pxa910_clk_init()
clk: mmp: pxa168: fix return value check in pxa168_clk_init()
clk: mmp: mmp2: fix return value check in mmp2_clk_init()
clk: qoriq: Don't allow CPU clocks higher than starting value
clk: imx: fix integer overflow in AV PLL round rate
clk: xgene: Don't call __pa on ioremaped address
clk/samsung: Use CLK_OF_DECLARE_DRIVER initialization method for CLKOUT
clk: rockchip: don't return NULL when failing to register ddrclk branch
The DVB binding schema at the DVB core assumes that the frontend is a
separate driver. Faling to do that causes OOPS when the module is
removed, as it tries to do a symbol_put_addr on an internal symbol,
causing craches like:
WARNING: CPU: 1 PID: 28102 at kernel/module.c:1108 module_put+0x57/0x70
Modules linked in: dvb_usb_gp8psk(-) dvb_usb dvb_core nvidia_drm(PO) nvidia_modeset(PO) snd_hda_codec_hdmi snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core snd_pcm snd_timer snd soundcore nvidia(PO) [last unloaded: rc_core]
CPU: 1 PID: 28102 Comm: rmmod Tainted: P WC O 4.8.4-build.1 #1
Hardware name: MSI MS-7309/MS-7309, BIOS V1.12 02/23/2009
Call Trace:
dump_stack+0x44/0x64
__warn+0xfa/0x120
module_put+0x57/0x70
module_put+0x57/0x70
warn_slowpath_null+0x23/0x30
module_put+0x57/0x70
gp8psk_fe_set_frontend+0x460/0x460 [dvb_usb_gp8psk]
symbol_put_addr+0x27/0x50
dvb_usb_adapter_frontend_exit+0x3a/0x70 [dvb_usb]
From Derek's tests:
"Attach bug is fixed, tuning works, module unloads without
crashing. Everything seems ok!"
Reported-by: Derek <user.vdr@gmail.com>
Tested-by: Derek <user.vdr@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit bc29131ecb10 ("[media] gp8psk: don't do DMA on stack") fixed the
usage of DMA on stack, but the memcpy was wrong for gp8psk_usb_in_op().
Fix it.
From Derek's email:
"Fix confirmed using 2 different Skywalker models with
HD mpeg4, SD mpeg2."
Suggested-by: Johannes Stezenbach <js@linuxtv.org>
Fixes: bc29131ecb10 ("[media] gp8psk: don't do DMA on stack")
Tested-by: Derek <user.vdr@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
As found by gcc -Wmaybe-uninitialized, having a storage_bytes value other
than 2 or 4 will result in undefined behavior:
drivers/iio/temperature/maxim_thermocouple.c: In function 'maxim_thermocouple_read':
drivers/iio/temperature/maxim_thermocouple.c:141:5: error: 'ret' may be used uninitialized in this function [-Werror=maybe-uninitialized]
This probably cannot happen, but returning -EINVAL here is appropriate
and makes gcc happy and the code more robust.
Fixes: 231147ee77 ("iio: maxim_thermocouple: Align 16 bit big endian value of raw reads")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
(cherry picked from commit 32cb7d27e6)
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
aoeblk contains some mysterious code, that wants to elevate the bio
vec page counts while it's under IO. That is not needed, it's
fragile, and it's causing kernel oopses for some.
Reported-by: Tested-by: Don Koch <kochd@us.ibm.com>
Tested-by: Tested-by: Don Koch <kochd@us.ibm.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
The ns->lba_shift assumes its value to be the logarithmic of the
LA size. A previous patch duplicated the lba_shift calculation into
lightnvm. It prematurely also subtracted a 512byte shift, which commonly
is applied per-command. The 512byte shift being subtracted twice led to
data loss when restoring the logical to physical mapping table from
device and when issuing I/O commands using rrpc.
Fix offset by removing the 512byte shift subtraction when calculating
lba_shift.
Fixes: b0b4e09c1a "lightnvm: control life of nvm_dev in driver"
Reported-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
Fix a recent regression in the 8250_dw serial driver introduced by
adding a quirk for the APM X-Gene SoC to it which uncovered an issue
related to the handling of built-in device properties in the core
ACPI device enumeration code (Heikki Krogerus).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=XF0E
-----END PGP SIGNATURE-----
Merge tag 'acpi-4.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fix from Rafael Wysocki:
"Fix a recent regression in the 8250_dw serial driver introduced by
adding a quirk for the APM X-Gene SoC to it which uncovered an issue
related to the handling of built-in device properties in the core ACPI
device enumeration code (Heikki Krogerus)"
* tag 'acpi-4.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI / platform: Add support for build-in properties
- Prevent the PM core from attempting to suspend parent devices
if any of their children, whose suspend callbacks were invoked
asynchronously, have failed to suspend during the "late" and
"noirq" phases of system-wide suspend of devices (Brian Norris).
- Prevent the boot-time system suspend test code from leaking a
reference to the RTC device used by it (Johan Hovold).
- Fix cpupower to use the return value of one of its library
functions correctly and restore the correct behavior of it
when used for setting cpufreq tunables broken during the 4.7
development cycle (Laura Abbott).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=ykEg
-----END PGP SIGNATURE-----
Merge tag 'pm-4.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix two bugs in error code paths in the PM core (system-wide
suspend of devices), a device reference leak in the boot-time suspend
test code and a cpupower utility regression from the 4.7 cycle.
Specifics:
- Prevent the PM core from attempting to suspend parent devices if
any of their children, whose suspend callbacks were invoked
asynchronously, have failed to suspend during the "late" and
"noirq" phases of system-wide suspend of devices (Brian Norris).
- Prevent the boot-time system suspend test code from leaking a
reference to the RTC device used by it (Johan Hovold).
- Fix cpupower to use the return value of one of its library
functions correctly and restore the correct behavior of it when
used for setting cpufreq tunables broken during the 4.7 development
cycle (Laura Abbott)"
* tag 'pm-4.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM / sleep: don't suspend parent when async child suspend_{noirq, late} fails
PM / sleep: fix device reference leak in test_suspend
cpupower: Correct return type of cpu_power_is_cpu_online() in cpufreq-set
- mmap handler for dma ops as generic handler no longer works for us [Alexey]
- Fixes for EZChip platform [Noam]
- Fix RTC clocksource driver build issue
- ARC IRQ handling fixes [Yuriy]
- Revert a recent makefile change which doesn't go well with oldish tools out in the wild
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=hbBv
-----END PGP SIGNATURE-----
Merge tag 'arc-4.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc
Pull ARC fixes from Vineet Gupta:
- mmap handler for dma ops as generic handler no longer works for us
[Alexey]
- Fixes for EZChip platform [Noam]
- Fix RTC clocksource driver build issue
- ARC IRQ handling fixes [Yuriy]
- Revert a recent makefile change which doesn't go well with oldish
tools out in the wild
* tag 'arc-4.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
ARCv2: MCIP: Use IDU_M_DISTRI_DEST mode if there is only 1 destination core
ARC: IRQ: Do not use hwirq as virq and vice versa
ARC: [plat-eznps] set default baud for early console
ARC: [plat-eznps] remove IPI clear from SMP operations
Revert "ARC: build: retire old toggles"
ARC: timer: rtc: implement read loop in "C" vs. inline asm
ARC: change return value of userspace cmpxchg assist syscall
arc: Implement arch-specific dma_map_ops.mmap
ARC: [SMP] avoid overriding present cpumask
ARC: Enable PERF_EVENTS in nSIM driven platforms
Minor doc fix, a DMI match for ideapad and a fix to toshiba-wmi to avoid loading
on non-toshiba systems.
Documentation/ABI:
- ibm_rtl: The "What:" fields are incomplete
toshiba-wmi:
- Fix loading the driver on non Toshiba laptops
ideapad-laptop:
- Add another DMI entry for Yoga 900
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJYJSzXAAoJEKbMaAwKp364Df0IAKOMnIMZ35K4uKCemZ7dVEtW
VvMgch2RZwEa+Oy8Og0o6WGYyurOR66w4oJqGlc9BYPaQo/akiKU0xLcQ2fqndsc
PnkberSaqER5/9COnSXLCWH9WsCW3rvdGHLg7ZicUiO+b6n/90hM4MRWL6j3QZCl
FYgMMEKSpPz7juZAdPIvfE4Mr157aESwmcHkihi7F4Ui6k2jln49R+zQoM6h9D/u
nH/pamxkfO/cJGQ3wcLVPhu6EL9wLqWU/+1/7FILYpoWkbiaJH3TtElQ3OU2yXq+
PmMcS8nI7Uv2Jrx66MfMx0fkCdA0lx5SlXsEmlwGtwk8A4qJq2AwTRvz5slHHTA=
=Upe0
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v4.9-3' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86
Pull x86 platform driver fixes from Darren Hart:
"Minor doc fix, a DMI match for ideapad and a fix to toshiba-wmi to
avoid loading on non-toshiba systems.
Documentation/ABI:
- ibm_rtl: The "What:" fields are incomplete
toshiba-wmi:
- Fix loading the driver on non Toshiba laptops
ideapad-laptop:
- Add another DMI entry for Yoga 900"
* tag 'platform-drivers-x86-v4.9-3' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86:
Documentation/ABI: ibm_rtl: The "What:" fields are incomplete
toshiba-wmi: Fix loading the driver on non Toshiba laptops
ideapad-laptop: Add another DMI entry for Yoga 900
Pull block fixes from Jens Axboe:
"Two small (really, one liners both of them!) fixes that should go into
this series:
- Request allocation error handling fix for nbd, from Christophe,
fixing a regression in this series.
- An oops fix for drbd. Not a regression in this series, but stable
material. From Richard"
* 'for-linus' of git://git.kernel.dk/linux-block:
drbd: Fix kernel_sendmsg() usage - potential NULL deref
nbd: Fix error handling
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=5c2j
-----END PGP SIGNATURE-----
Merge tag 'pci-v4.9-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI fixes from Bjorn Helgaas:
- Update MAINTAINERS for Intel VMD driver filename
- Update Rockchip rk3399 host bridge driver DTS and resets
- Fix ROM shadow problem that made some video device initialization
fail
* tag 'pci-v4.9-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
PCI: VMD: Update filename to reflect move
arm64: dts: rockchip: add three new resets for rk3399 PCIe controller
PCI: rockchip: Add three new resets as required properties
PCI: Don't attempt to claim shadow copies of ROM
-----BEGIN PGP SIGNATURE-----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=Zg1p
-----END PGP SIGNATURE-----
Merge tag 'drm-fixes-for-v4.9-rc5' of git://people.freedesktop.org/~airlied/linux
Pull drm fixes from Dave Airlie:
"AMD, radeon, i915, imx, msm and udl fixes:
- amdgpu/radeon have a number of power management regressions and
fixes along with some better error checking
- imx has a single regression fix
- udl has a single kmalloc instead of stack for usb control msg fix
- msm has some fixes for modesetting bugs and regressions
- i915 has a one fix for a Sandybridge regression along with some
others for DP audio.
They all seem pretty okay at this stage, we've got one MST fix I know
going through process for i915, but I expect it'll be next week"
* tag 'drm-fixes-for-v4.9-rc5' of git://people.freedesktop.org/~airlied/linux: (30 commits)
drm/udl: make control msg static const. (v2)
drm/amd/powerplay: implement get_clock_by_type for iceland.
drm/amd/powerplay/smu7: fix checks in smu7_get_evv_voltages (v2)
drm/amd/powerplay: update phm_get_voltage_evv_on_sclk for iceland
drm/amd/powerplay: propagate errors in phm_get_voltage_evv_on_sclk
drm/imx: disable planes before DC
drm/amd/powerplay: return false instead of -EINVAL
drm/amdgpu/powerplay/smu7: fix unintialized data usage
drm/amdgpu: fix crash in acp_hw_fini
drm/i915: Limit Valleyview and earlier to only using mappable scanout
drm/i915: Round tile chunks up for constructing partial VMAs
drm/i915/dp: Extend BDW DP audio workaround to GEN9 platforms
drm/i915/dp: BDW cdclk fix for DP audio
drm/i915/vlv: Prevent enabling hpd polling in late suspend
drm/i915: Respect alternate_ddc_pin for all DDI ports
drm/msm: Fix error handling crashes seen when VRAM allocation fails
drm/msm/mdp5: 8x16 actually has 8 mixer stages
drm/msm/mdp5: no scaling support on RGBn pipes for 8x16
drm/msm/mdp5: handle non-fullscreen base plane case
drm/msm: Set CLK_IGNORE_UNUSED flag for PLL clocks
...
- Fix mmc card initialization for hosts not supporting HW busy detection
- Fix mmc_test for sending commands during non-blocking write
MMC host:
- mxs: Avoid using an uninitialized
- sdhci: Restore enhanced strobe setting during runtime resume
- sdhci: Fix a couple of reset related issues
- dw_mmc: Fix a reset controller issue
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=mnjf
-----END PGP SIGNATURE-----
Merge tag 'mmc-v4.9-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC fixes from Ulf Hansson:
"MMC core:
- Fix mmc card initialization for hosts not supporting HW busy
detection
- Fix mmc_test for sending commands during non-blocking write
MMC host:
- mxs: Avoid using an uninitialized
- sdhci: Restore enhanced strobe setting during runtime resume
- sdhci: Fix a couple of reset related issues
- dw_mmc: Fix a reset controller issue"
* tag 'mmc-v4.9-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: mxs: Initialize the spinlock prior to using it
mmc: mmc: Use 500ms as the default generic CMD6 timeout
mmc: mmc_test: Fix "Commands during non-blocking write" tests
mmc: sdhci: Fix missing enhanced strobe setting during runtime resume
mmc: sdhci: Reset cmd and data circuits after tuning failure
mmc: sdhci: Fix unexpected data interrupt handling
mmc: sdhci: Fix CMD line reset interfering with ongoing data transfer
mmc: dw_mmc: add the "reset" as name of reset controller
Documentation: synopsys-dw-mshc: add binding for reset-names
- Fix a host of runtime problems with the Intel
Cherryview driver: suspend/resume needs to be
marshalled properly, and strange effects from BIOS
interaction during suspend/resume need to be
dealt with.
- A single bit was being set wrong in the Aspeed
driver.
- Fix an iProc probe ordering fallout resulting from
v4.9 refactorings for bus population.
- Do not specify a default trigger in the ST Micro
cascaded GPIO IRQ controller: the kernel will moan.
- Make IRQs optional altogether on the STM32 driver,
it turns out not all systems have them or want them.
- Fix a re-probe bug in the i.MX driver, it will
eventually crash if probed repeatedly, not good.
-----BEGIN PGP SIGNATURE-----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=ENR8
-----END PGP SIGNATURE-----
Merge tag 'pinctrl-v4.9-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control fixes from Linus Walleij:
"All is about drivers, no core business going on.
- Fix a host of runtime problems with the Intel Cherryview driver:
suspend/resume needs to be marshalled properly, and strange effects
from BIOS interaction during suspend/resume need to be dealt with.
- A single bit was being set wrong in the Aspeed driver.
- Fix an iProc probe ordering fallout resulting from v4.9
refactorings for bus population.
- Do not specify a default trigger in the ST Micro cascaded GPIO IRQ
controller: the kernel will moan.
- Make IRQs optional altogether on the STM32 driver, it turns out not
all systems have them or want them.
- Fix a re-probe bug in the i.MX driver, it will eventually crash if
probed repeatedly, not good"
* tag 'pinctrl-v4.9-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl-aspeed-g5: Never set SCU90[6]
pinctrl: cherryview: Prevent possible interrupt storm on resume
pinctrl: cherryview: Serialize register access in suspend/resume
pinctrl: imx: reset group index on probe
pinctrl: stm32: move gpio irqs binding to optional
pinctrl: stm32: remove dependency with interrupt controller
pinctrl: st: don't specify default interrupt trigger
pinctrl: iproc: Fix iProc and NSP GPIO support
