Here are some small USB fixes for 6.11-rc6. Included in here are:
- dwc3 driver fixes for reported issues
- MAINTAINER file update, marking a driver as unsupported :(
- cdnsp driver fixes
- USB gadget driver fix
- USB sysfs fix
- other tiny fixes
- new device ids for usb serial driver
All of these have been in linux-next this week with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZtNVTw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymqWwCgmITg5Owdigw+ejnkLJ4Q/CHYfRkAoLh7nkcm
kaX7IqZLgVDr4rvgVcmR
=azoE
-----END PGP SIGNATURE-----
Merge tag 'usb-6.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are some small USB fixes for 6.11-rc6. Included in here are:
- dwc3 driver fixes for reported issues
- MAINTAINER file update, marking a driver as unsupported :(
- cdnsp driver fixes
- USB gadget driver fix
- USB sysfs fix
- other tiny fixes
- new device ids for usb serial driver
All of these have been in linux-next this week with no reported
issues"
* tag 'usb-6.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
USB: serial: option: add MeiG Smart SRM825L
usb: cdnsp: fix for Link TRB with TC
usb: dwc3: st: add missing depopulate in probe error path
usb: dwc3: st: fix probed platform device ref count on probe error path
usb: dwc3: ep0: Don't reset resource alloc flag (including ep0)
usb: core: sysfs: Unmerge @usb3_hardware_lpm_attr_group in remove_power_attributes()
usb: typec: fsa4480: Relax CHIP_ID check
usb: dwc3: xilinx: add missing depopulate in probe error path
usb: dwc3: omap: add missing depopulate in probe error path
dt-bindings: usb: microchip,usb2514: Fix reference USB device schema
usb: gadget: uvc: queue pump work in uvcg_video_enable()
cdc-acm: Add DISABLE_ECHO quirk for GE HealthCare UI Controller
usb: cdnsp: fix incorrect index in cdnsp_get_hw_deq function
usb: dwc3: core: Prevent USB core invalid event buffer address access
MAINTAINERS: Mark UVC gadget driver as orphan
Minor fixes only. The sd.c one ignores a sync cache request if format
is in progress which can happen if formatting a drive across
suspend/resume.
Signed-off-by: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCZtM61CYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishZ+yAQDz47pp
ZEr9bOMueiIYs+ZpmK1KRBHviFApXr9JJGzoHAD/WsUN43+5+y12QhGWSA0/M4qo
Tog2K3HXvb4kIsDoXEg=
=n2gm
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Minor fixes only.
The sd.c one ignores a sync cache request if format is in progress
which can happen if formatting a drive across suspend/resume"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: sd: Ignore command SYNCHRONIZE CACHE error if format in progress
scsi: aacraid: Fix double-free on probe failure
scsi: lpfc: Fix overflow build issue
- One more write delegation fix
-----BEGIN PGP SIGNATURE-----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=uoNK
-----END PGP SIGNATURE-----
Merge tag 'nfsd-6.11-3' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd fix from Chuck Lever:
- One more write delegation fix
* tag 'nfsd-6.11-3' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
nfsd: fix nfsd4_deleg_getattr_conflict in presence of third party lease
* Do not call out v1 inodes with non-zero di_nlink field as being corrupt.
* Change xfs_finobt_count_blocks() to count "free inode btree" blocks rather
than "inode btree" blocks.
* Don't report the number of trimmed bytes via FITRIM because the underlying
storage isn't required to do anything and failed discard IOs aren't
reported to the caller anyway.
* Fix incorrect setting of rm_owner field in an rmap query.
* Report missing disk offset range in an fsmap query.
* Obtain m_growlock when extending realtime section of the filesystem.
* Reset rootdir extent size hint after extending realtime section of the
filesystem.
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQjMC4mbgVeU7MxEIYH7y4RirJu9AUCZs3OYgAKCRAH7y4RirJu
9OF/AP9MXSSmBHmTfpqJZbKCI9j+EvAGyucbITi32ZBnbnNnKgEAr5FrueGcKS98
H/FxMeNbSWZp0s5hUYsXsACtdo75YgE=
=prEp
-----END PGP SIGNATURE-----
Merge tag 'xfs-6.11-fixes-4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs fixes from Chandan Babu:
- Do not call out v1 inodes with non-zero di_nlink field as being
corrupt
- Change xfs_finobt_count_blocks() to count "free inode btree" blocks
rather than "inode btree" blocks
- Don't report the number of trimmed bytes via FITRIM because the
underlying storage isn't required to do anything and failed discard
IOs aren't reported to the caller anyway
- Fix incorrect setting of rm_owner field in an rmap query
- Report missing disk offset range in an fsmap query
- Obtain m_growlock when extending realtime section of the filesystem
- Reset rootdir extent size hint after extending realtime section of
the filesystem
* tag 'xfs-6.11-fixes-4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: reset rootdir extent size hint after growfsrt
xfs: take m_growlock when running growfsrt
xfs: Fix missing interval for missing_owner in xfs fsmap
xfs: use XFS_BUF_DADDR_NULL for daddrs in getfsmap code
xfs: Fix the owner setting issue for rmap query in xfs fsmap
xfs: don't bother reporting blocks trimmed via FITRIM
xfs: xfs_finobt_count_blocks() walks the wrong btree
xfs: fix folio dirtying for XFILE_ALLOC callers
xfs: fix di_onlink checking for V1/V2 inodes
There is a fairly large number of bug fixes for Qualcomm platforms,
most of them addressing issues with the devicetree files for the
newly added Snapdragon X1 based laptops to make them more reliable.
The Qualcomm driver changes address a few build-time issues as well
as runtime problems in the tzmem and scm firmware, the USB Type-C
driver, and the cmd-db and pmic_glink soc drivers.
The NXP i.MX usually gets a bunch of devicetree fixes that is proportional
to the number of supported machines. This includes both warning fixes
and correctness for the 64-bit i.MX9, i.MX8 and layerscape platforms,
as well as a single fix for a 32-bit i.MX6 based board.
The other changes are the usual minor changes, including an update to the
MAINTAINERS file, an omap3 dts file and a SoC driver for mpfs (risc-v).
-----BEGIN PGP SIGNATURE-----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=tK5m
-----END PGP SIGNATURE-----
Merge tag 'arm-fixes-6.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"There is a fairly large number of bug fixes for Qualcomm platforms,
most of them addressing issues with the devicetree files for the newly
added Snapdragon X1 based laptops to make them more reliable.
The Qualcomm driver changes address a few build-time issues as well as
runtime problems in the tzmem and scm firmware, the USB Type-C driver,
and the cmd-db and pmic_glink soc drivers.
The NXP i.MX usually gets a bunch of devicetree fixes that is
proportional to the number of supported machines. This includes both
warning fixes and correctness for the 64-bit i.MX9, i.MX8 and
layerscape platforms, as well as a single fix for a 32-bit i.MX6 based
board.
The other changes are the usual minor changes, including an update to
the MAINTAINERS file, an omap3 dts file and a SoC driver for mpfs
(risc-v)"
* tag 'arm-fixes-6.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (50 commits)
firmware: microchip: fix incorrect error report of programming:timeout on success
soc: qcom: pd-mapper: Fix singleton refcount
firmware: qcom: tzmem: disable sdm670 platform
soc: qcom: pmic_glink: Actually communicate when remote goes down
usb: typec: ucsi: Move unregister out of atomic section
soc: qcom: pmic_glink: Fix race during initialization
firmware: qcom: qseecom: remove unused functions
firmware: qcom: tzmem: fix virtual-to-physical address conversion
firmware: qcom: scm: Mark get_wq_ctx() as atomic call
arm64: dts: qcom: x1e80100: Fix Adreno SMMU global interrupt
arm64: dts: qcom: disable GPU on x1e80100 by default
arm64: dts: imx8mm-phygate: fix typo pinctrcl-0
arm64: dts: imx95: correct L3Cache cache-sets
arm64: dts: imx95: correct a55 power-domains
arm64: dts: freescale: imx93-tqma9352-mba93xxla: fix typo
arm64: dts: freescale: imx93-tqma9352: fix CMA alloc-ranges
ARM: dts: imx6dl-yapp43: Increase LED current to match the yapp4 HW design
arm64: dts: imx93: update default value for snps,clk-csr
arm64: dts: freescale: tqma9352: Fix watchdog reset
arm64: dts: imx8mp-beacon-kit: Fix Stereo Audio on WM8962
...
- a fix for Cypress PS/2 touchpad for regression introduced in 6.11
merge window where timeout condition is incorrectly reported for
all extended Cypress commands.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQST2eWILY88ieB2DOtAj56VGEWXnAUCZtI2cgAKCRBAj56VGEWX
nJGNAQCYR/VQOtGBoIo4/0VdxxH6qTuLu7XhWbBdzgx8ee6t6gD/Rj94mEpOh12V
JEd3MiDdEtQt5KwwdkzUyiHYJ0x1WAw=
=PzXA
-----END PGP SIGNATURE-----
Merge tag 'input-for-v6.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fix from Dmitry Torokhov:
- a fix for Cypress PS/2 touchpad for regression introduced in 6.11
merge window where a timeout condition is incorrectly reported for
all extended Cypress commands
* tag 'input-for-v6.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: cypress_ps2 - fix waiting for command response
-----BEGIN PGP SIGNATURE-----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=+JAO
-----END PGP SIGNATURE-----
Merge tag 'pci-v6.11-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci fixes from Bjorn Helgaas:
- Add Manivannan Sadhasivam as PCI native host bridge and endpoint
driver reviewer (Manivannan Sadhasivam)
- Disable MHI RAM data parity error interrupt for qcom SA8775P SoC to
work around hardware erratum that causes a constant stream of
interrupts (Manivannan Sadhasivam)
- Don't try to fall back to qcom Operating Performance Points (OPP)
support unless the platform actually supports OPP (Manivannan
Sadhasivam)
- Add imx@lists.linux.dev mailing list to MAINTAINERS for NXP
layerscape and imx6 PCI controller drivers (Frank Li)
* tag 'pci-v6.11-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
MAINTAINERS: PCI: Add NXP PCI controller mailing list imx@lists.linux.dev
PCI: qcom: Use OPP only if the platform supports it
PCI: qcom-ep: Disable MHI RAM data parity error interrupt for SA8775P SoC
MAINTAINERS: Add Manivannan Sadhasivam as Reviewer for PCI native host bridge and endpoint drivers
-----BEGIN PGP SIGNATURE-----
iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAmbSK5QQHGF4Ym9lQGtl
cm5lbC5kawAKCRD301j7KXHgppCNEACKzt/1O3DFYe4AscV3xdaFXs0TpmRzkg7C
XvrxnxzWrVrlsO+hlgN1dITCcwo5kb1ulKr6Z2PbQE2xGdNlqXN9nd/oZ6OJYJDe
CAdlzrY/YxtT0qKkZjMe0ADRDtQDfoeTR++CfgmxCviyy1fMgGb3YiMnyVleS8D3
mHbqZZFkiIt6poIv4YZEuDrUdVEEBr7kZx805oYu5s6VlTT9N2p89xjPmV4ebUi4
gDKCnlnDGXJ/SEqzuSnhM5fDC6uGc4h1LtsRsoKAVwv0CW6U94Z+ne8bkqDa1QsX
AsufFPKvGnJn8eNh0PqXr1ZkWxL1NzUt/zL2wfDd97DGM5M5HFaBFg/gXo5xNmWa
fQheSvhxqOnIq5Jj6kPj3aOJiGpJhFzxwQ4JhmOA9QUBMvBG8Odl/CA4ZKdPTaOC
zTcGUyWDw5z0bmwjW/EMcwUcteVX+1hg6BqQWiEret6PJf76I7+Mj/1ZNkpsmxDA
zndQ6BsS/vgqnTAJFjk92Uw3doJcs0DJcYPkk4jbFJWPODBhqm2id7qJtvBsRmrD
2IP8/9sAIgcXTdDvOPr6LNAyONPfpE0ya0gGi4xzKlsXnDaO+HTDNdeMKNMWkY+O
U7uoi5OZfgC/6XLaaZETEH332LEPEdXeaFRRfBzy8OqsTIM4fSXmtYhaRt0vXuUC
t0N2fW5jdw==
=Wgk4
-----END PGP SIGNATURE-----
Merge tag 'block-6.11-20240830' of git://git.kernel.dk/linux
Pull block fix from Jens Axboe:
"Fix for a single regression for WRITE_SAME introduced in the 6.11
merge window"
* tag 'block-6.11-20240830' of git://git.kernel.dk/linux:
block: fix detection of unsupported WRITE SAME in blkdev_issue_write_zeroes
-----BEGIN PGP SIGNATURE-----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=Zabp
-----END PGP SIGNATURE-----
Merge tag 'io_uring-6.11-20240830' of git://git.kernel.dk/linux
Pull io_uring fixes from Jens Axboe:
- A fix for a regression that happened in 6.11 merge window, where the
copying of iovecs for compat mode applications got broken for certain
cases.
- Fix for a bug introduced in 6.10, where if using recv/send bundles
with classic provided buffers, the recv/send would fail to set the
right iovec count. This caused 0 byte send/recv results. Found via
code coverage testing and writing a test case to exercise it.
* tag 'io_uring-6.11-20240830' of git://git.kernel.dk/linux:
io_uring/kbuf: return correct iovec count from classic buffer peek
io_uring/rsrc: ensure compat iovecs are copied correctly
It contains:
- DTS directory update to match all entries not only those starting with
at91 or sama
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTsZ8eserC1pmhwqDmejrg/N2X7/QUCZsy0ugAKCRCejrg/N2X7
/bDxAP446nhinI+fXI5fR93jhEaZary36Rz/CpfKR3DDf8CyCQEAu3+bqjC9cGNA
K2Bxt1riIRCjBK+4upETO53abdQ+FgI=
=YvPO
-----END PGP SIGNATURE-----
Merge tag 'at91-fixes-6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/fixes
Microchip AT91 fixes for v6.11
It contains:
- DTS directory update to match all entries not only those starting with
at91 or sama
-----BEGIN PGP SIGNATURE-----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=Li4s
-----END PGP SIGNATURE-----
Merge tag 'lsm-pr-20240830' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm
Pull lsm fix from Paul Moore:
"One small patch to correct a NFS permissions problem with SELinux and
Smack"
* tag 'lsm-pr-20240830' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm:
selinux,smack: don't bypass permissions check in inode_setsecctx hook
- Remove checks for highest performance match on preferred cores when
updating preferred core ranking in amd-pstate (Mario Limonciello).
- Make amd-pstate call topology_logical_package_id() instead of
logical_die_id() to get a socked ID for a CPU (Gautham Shenoy).
- Fix uninitialized variable in amd_pstate_cpu_boost_update() (Dan
Carpenter).
-----BEGIN PGP SIGNATURE-----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=iZ8s
-----END PGP SIGNATURE-----
Merge tag 'pm-6.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix three issues in the amd-pstate cpufreq driver.
Specifics:
- Remove checks for highest performance match on preferred cores when
updating preferred core ranking in amd-pstate (Mario Limonciello)
- Make amd-pstate call topology_logical_package_id() instead of
logical_die_id() to get a socked ID for a CPU (Gautham Shenoy)
- Fix uninitialized variable in amd_pstate_cpu_boost_update() (Dan
Carpenter)"
* tag 'pm-6.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq/amd-pstate-ut: Don't check for highest perf matching on prefcore
cpufreq/amd-pstate: Use topology_logical_package_id() instead of logical_die_id()
cpufreq: amd-pstate: Fix uninitialized variable in amd_pstate_cpu_boost_update()
- Single fix for non-continous port map programming
-----BEGIN PGP SIGNATURE-----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=7oFZ
-----END PGP SIGNATURE-----
Merge tag 'soundwire-6.11-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire
Pull soundwire fix from Vinod Koul:
- Single fix for non-continous port map programming
* tag 'soundwire-6.11-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire:
soundwire: stream: fix programming slave ports for non-continous port maps
Including:
- Fix a device-stall problem in bad io-page-fault setups (faults
received from devices with no supporting domain attached).
- Context flush fix for Intel VT-d.
- Do not allow non-read+non-write mapping through iommufd as most
implementations can not handle that.
- Fix a possible infinite-loop issue in map_pages() path.
- Add Jean-Philippe as reviewer for SMMUv3 SVA support
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEEr9jSbILcajRFYWYyK/BELZcBGuMFAmbRvfEACgkQK/BELZcB
GuOB8w//WLapQpxMw9w+4l3Z3SqxB5gSPF6pdCJwYRrpFGBX1yNZ0vWtF2TpKtOC
NaMa/EC1C2FWjcArCP21uFtDvN04FgXSVl6sjFUHsUf+YALrUfljQk/XFI4SenTq
PtvPv8PVGbhqLtdJDXMlQWBN3RX0qK/PIFmuUX5ySBk7J7k5QyBi2HEuK2DbPM7j
+LMnyTHj5Aa2jRz/NSCDIRKbSFJKgvd8apval2VX0zljjpyqk5KmHHjkLtiOiTTI
G6ZJlRYCn98eTLU2ww8b7/y0vVYop7C1Q7Cyds/72xvW+a3jbSRIGf6yqtmdbMYd
faxRng5rWHWsq3XMZC+Ts9k2FA3pUIvOmfptCFfrQYYXvZI6dD6o7uMko6SF82n4
xEy+H6AEWZXF70xaJDp1cn1PpURJgJly/l/6qAIB746qNT7j/CcOOha1bpbCy81x
EIOl0B4wyJGjQnxjKsH01K9ec3uT6rugbpFEE9PL8l25khhyweBwuQWc2EVxRZgH
ICH4pCmvU9Wy6mpXL2R/SyzECWjgg0oJr+pq3Yxv7xufSGQswWJ/StFozSBHnH01
OGGA/2xMrNeRzlm4PZfRzdAiCfYX9kEodiF1jGLA4B1V5Tx/y1LSX7W/nCeZmlRz
/OhEC07DWZumeSCTe5I+BmZwiXh/DEAlUypDQkVKaaeGltlyvl8=
=8XuD
-----END PGP SIGNATURE-----
Merge tag 'iommu-fixes-v6.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux
Pull iommu fixes from Joerg Roedel:
- Fix a device-stall problem in bad io-page-fault setups (faults
received from devices with no supporting domain attached).
- Context flush fix for Intel VT-d.
- Do not allow non-read+non-write mapping through iommufd as most
implementations can not handle that.
- Fix a possible infinite-loop issue in map_pages() path.
- Add Jean-Philippe as reviewer for SMMUv3 SVA support
* tag 'iommu-fixes-v6.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux:
MAINTAINERS: Add Jean-Philippe as SMMUv3 SVA reviewer
iommu: Do not return 0 from map_pages if it doesn't do anything
iommufd: Do not allow creating areas without READ or WRITE
iommu/vt-d: Fix incorrect domain ID in context flush helper
iommu: Handle iommu faults for a bad iopf setup
io_provided_buffers_select() returns 0 to indicate success, but it should
be returning 1 to indicate that 1 vec was mapped. This causes peeking
to fail with classic provided buffers, and while that's not a use case
that anyone should use, it should still work correctly.
The end result is that no buffer will be selected, and hence a completion
with '0' as the result will be posted, without a buffer attached.
Fixes: 35c8711c8f ("io_uring/kbuf: add helpers for getting/peeking multiple buffers")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
It is not safe to dereference fl->c.flc_owner without first confirming
fl->fl_lmops is the expected manager. nfsd4_deleg_getattr_conflict()
tests fl_lmops but largely ignores the result and assumes that flc_owner
is an nfs4_delegation anyway. This is wrong.
With this patch we restore the "!= &nfsd_lease_mng_ops" case to behave
as it did before the change mentioned below. This is the same as the
current code, but without any reference to a possible delegation.
Fixes: c5967721e1 ("NFSD: handle GETATTR conflict with write delegation")
Signed-off-by: NeilBrown <neilb@suse.de>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
For buffer registration (or updates), a userspace iovec is copied in
and updated. If the application is within a compat syscall, then the
iovec type is compat_iovec rather than iovec. However, the type used
in __io_sqe_buffers_update() and io_sqe_buffers_register() is always
struct iovec, and hence the source is incremented by the size of a
non-compat iovec in the loop. This misses every other iovec in the
source, and will run into garbage half way through the copies and
return -EFAULT to the application.
Maintain the source address separately and assign to our user vec
pointer, so that copies always happen from the right source address.
While in there, correct a bad placement of __user which triggered
the following sparse warning prior to this fix:
io_uring/rsrc.c:981:33: warning: cast removes address space '__user' of expression
io_uring/rsrc.c:981:30: warning: incorrect type in assignment (different address spaces)
io_uring/rsrc.c:981:30: expected struct iovec const [noderef] __user *uvec
io_uring/rsrc.c:981:30: got struct iovec *[noderef] __user
Fixes: f4eaf8eda8 ("io_uring/rsrc: Drop io_copy_iov in favor of iovec API")
Reviewed-by: Gabriel Krisman Bertazi <krisman@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Here's a new modem device id.
This one has been in linux-next with no reported issues.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQHbPq+cpGvN/peuzMLxc3C7H1lCAUCZtHD4wAKCRALxc3C7H1l
CAQVAP4vhB9K9/j24wsz+B7N1WHSZe/USLUsO5xJGwLOu3npXwEAtd8Xzz/DVFaw
/qmtd4YflELooK6u0sK1vla/jydnzgU=
=wBM6
-----END PGP SIGNATURE-----
Merge tag 'usb-serial-6.11-rc6' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus
Johan writes:
USB-serial device id for 6.11-rc6
Here's a new modem device id.
This one has been in linux-next with no reported issues.
* tag 'usb-serial-6.11-rc6' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial:
USB: serial: option: add MeiG Smart SRM825L
ttm:
- revert prefault change, caused stutters
aperture:
- handle non-VGA devices bettter
amdgpu:
- SWSMU gaming stability fix
- SMU 13.0.7 fix
- SWSMU documentation alignment fix
- SMU 14.0.x fixes
- GC 12.x fix
- Display fix
- IP discovery fix
- SMU 13.0.6 fix
i915:
- Fix#11195: The external display connect via USB type-C dock stays blank after re-connect the dock
- Make DSI backlight work for 2G version of Lenovo Yoga Tab 3 X90F
- Move ARL GuC firmware to correct version
xe:
- Invalidate media_gt TLBs
- Fix HWMON i1 power setup write command
vmwgfx:
- prevent unmapping active read buffers
- fix prime with external buffers
- disable coherent dumb buffers without 3d
v3d:
- disable preemption while updating GPU stats
-----BEGIN PGP SIGNATURE-----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=IfxC
-----END PGP SIGNATURE-----
Merge tag 'drm-fixes-2024-08-30' of https://gitlab.freedesktop.org/drm/kernel
Pull drm fixes from Dave Airlie:
"Another week, another set of GPU fixes. amdgpu and vmwgfx leading the
charge, then i915 and xe changes along with v3d and some other bits.
The TTM revert is due to some stuttering graphical apps probably due
to longer stalls while prefaulting.
Seems pretty much where I'd expect things,
ttm:
- revert prefault change, caused stutters
aperture:
- handle non-VGA devices bettter
amdgpu:
- SWSMU gaming stability fix
- SMU 13.0.7 fix
- SWSMU documentation alignment fix
- SMU 14.0.x fixes
- GC 12.x fix
- Display fix
- IP discovery fix
- SMU 13.0.6 fix
i915:
- Fix#11195: The external display connect via USB type-C dock stays
blank after re-connect the dock
- Make DSI backlight work for 2G version of Lenovo Yoga Tab 3 X90F
- Move ARL GuC firmware to correct version
xe:
- Invalidate media_gt TLBs
- Fix HWMON i1 power setup write command
vmwgfx:
- prevent unmapping active read buffers
- fix prime with external buffers
- disable coherent dumb buffers without 3d
v3d:
- disable preemption while updating GPU stats"
* tag 'drm-fixes-2024-08-30' of https://gitlab.freedesktop.org/drm/kernel:
drm/xe/hwmon: Fix WRITE_I1 param from u32 to u16
drm/v3d: Disable preemption while updating GPU stats
drm/amd/pm: Drop unsupported features on smu v14_0_2
drm/amd/pm: Add support for new P2S table revision
drm/amdgpu: support for gc_info table v1.3
drm/amd/display: avoid using null object of framebuffer
drm/amdgpu/gfx12: set UNORD_DISPATCH in compute MQDs
drm/amd/pm: update message interface for smu v14.0.2/3
drm/amdgpu/swsmu: always force a state reprogram on init
drm/amdgpu/smu13.0.7: print index for profiles
drm/amdgpu: align pp_power_profile_mode with kernel docs
drm/i915/dp_mst: Fix MST state after a sink reset
drm/xe: Invalidate media_gt TLBs
drm/i915: ARL requires a newer GSC firmware
drm/i915/dsi: Make Lenovo Yoga Tab 3 X90F DMI match less strict
video/aperture: optionally match the device in sysfb_disable()
drm/vmwgfx: Disable coherent dumb buffers without 3d
drm/vmwgfx: Fix prime with external buffers
drm/vmwgfx: Prevent unmapping active read buffers
Revert "drm/ttm: increase ttm pre-fault value to PMD size"
vmwgfx related to buffer operations, a fix for video/aperture with
non-VGA primary devices, and a preemption status fix for v3d
-----BEGIN PGP SIGNATURE-----
iJUEABMJAB0WIQTkHFbLp4ejekA/qfgnX84Zoj2+dgUCZtCKzwAKCRAnX84Zoj2+
drMcAYDvGyENhD3jcOSM0vd1pEgleMSKoD4sbsj+JO6vMona7/dWzpUXHyxZg0P9
7gOZAkwBgMQHQKWBOga/LnloJi1/GC4Y7pjR4tDzLRO4ejbGdStLK8vEMKJKltwB
ej1UUueBAQ==
=4GlG
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-fixes-2024-08-29' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes
A revert for a previous TTM commit causing stuttering, 3 fixes for
vmwgfx related to buffer operations, a fix for video/aperture with
non-VGA primary devices, and a preemption status fix for v3d
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <mripard@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240829-efficient-swift-from-lemuria-f60c05@houat
The runtime constant feature removes all the users of these variables,
allowing the compiler to optimize them away. It's quite difficult to
extract their values from the kernel text, and the memory saved by
removing them is tiny, and it was never the point of this optimization.
Since the dentry_hashtable is a core data structure, it's valuable for
debugging tools to be able to read it easily. For instance, scripts
built on drgn, like the dentrycache script[1], rely on it to be able to
perform diagnostics on the contents of the dcache. Annotate it as used,
so the compiler doesn't discard it.
Link: 3afc56146f/drgn_tools/dentry.py (L325-L355) [1]
Fixes: e3c92e8171 ("runtime constants: add x86 architecture support")
Signed-off-by: Stephen Brennan <stephen.s.brennan@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- Fix#11195: The external display connect via USB type-C dock stays blank after re-connect the dock
- Make DSI backlight work for 2G version of Lenovo Yoga Tab 3 X90F
. Move ARL GuC firmware to correct version
-
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZtAd8WTw1xiSu_TS@jlahtine-mobl.ger.corp.intel.com
No known outstanding regressions.
Current release - regressions:
- wifi: iwlwifi: fix hibernation
- eth: ionic: prevent tx_timeout due to frequent doorbell ringing
Previous releases - regressions:
- sched: fix sch_fq incorrect behavior for small weights
- wifi:
- iwlwifi: take the mutex before running link selection
- wfx: repair open network AP mode
- netfilter: restore IP sanity checks for netdev/egress
- tcp: fix forever orphan socket caused by tcp_abort
- mptcp: close subflow when receiving TCP+FIN
- bluetooth: fix random crash seen while removing btnxpuart driver
Previous releases - always broken:
- mptcp: more fixes for the in-kernel PM
- eth: bonding: change ipsec_lock from spin lock to mutex
- eth: mana: fix race of mana_hwc_post_rx_wqe and new hwc response
Misc:
- documentation: drop special comment style for net code
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=yJIE
-----END PGP SIGNATURE-----
Merge tag 'net-6.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from bluetooth, wireless and netfilter.
No known outstanding regressions.
Current release - regressions:
- wifi: iwlwifi: fix hibernation
- eth: ionic: prevent tx_timeout due to frequent doorbell ringing
Previous releases - regressions:
- sched: fix sch_fq incorrect behavior for small weights
- wifi:
- iwlwifi: take the mutex before running link selection
- wfx: repair open network AP mode
- netfilter: restore IP sanity checks for netdev/egress
- tcp: fix forever orphan socket caused by tcp_abort
- mptcp: close subflow when receiving TCP+FIN
- bluetooth: fix random crash seen while removing btnxpuart driver
Previous releases - always broken:
- mptcp: more fixes for the in-kernel PM
- eth: bonding: change ipsec_lock from spin lock to mutex
- eth: mana: fix race of mana_hwc_post_rx_wqe and new hwc response
Misc:
- documentation: drop special comment style for net code"
* tag 'net-6.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (57 commits)
nfc: pn533: Add poll mod list filling check
mailmap: update entry for Sriram Yagnaraman
selftests: mptcp: join: check re-re-adding ID 0 signal
mptcp: pm: ADD_ADDR 0 is not a new address
selftests: mptcp: join: validate event numbers
mptcp: avoid duplicated SUB_CLOSED events
selftests: mptcp: join: check re-re-adding ID 0 endp
mptcp: pm: fix ID 0 endp usage after multiple re-creations
mptcp: pm: do not remove already closed subflows
selftests: mptcp: join: no extra msg if no counter
selftests: mptcp: join: check re-adding init endp with != id
mptcp: pm: reset MPC endp ID when re-added
mptcp: pm: skip connecting to already established sf
mptcp: pm: send ACK on an active subflow
selftests: mptcp: join: check removing ID 0 endpoint
mptcp: pm: fix RM_ADDR ID for the initial subflow
mptcp: pm: reuse ID 0 after delete and re-add
net: busy-poll: use ktime_get_ns() instead of local_clock()
sctp: fix association labeling in the duplicate COOKIE-ECHO case
mptcp: pr_debug: add missing \n at the end
...
Commit 8bccf667f6 ("Input: cypress_ps2 - report timeouts when reading
command status") uncovered an existing problem with cypress_ps2 driver:
it tries waiting on a PS/2 device waitqueue without using the rest of
libps2. Unfortunately without it nobody signals wakeup for the
waiting process, and each "extended" command was timing out. But the
rest of the code simply did not notice it.
Fix this by switching from homegrown way of sending request to get
command response and reading it to standard ps2_command() which does
the right thing.
Reported-by: Woody Suwalski <terraluna977@gmail.com>
Tested-by: Woody Suwalski <terraluna977@gmail.com>
Fixes: 8bccf667f6 ("Input: cypress_ps2 - report timeouts when reading command status")
Link: https://lore.kernel.org/r/a8252e0f-dab4-ef5e-2aa1-407a6f4c7204@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
In case of im_protocols value is 1 and tm_protocols value is 0 this
combination successfully passes the check
'if (!im_protocols && !tm_protocols)' in the nfc_start_poll().
But then after pn533_poll_create_mod_list() call in pn533_start_poll()
poll mod list will remain empty and dev->poll_mod_count will remain 0
which lead to division by zero.
Normally no im protocol has value 1 in the mask, so this combination is
not expected by driver. But these protocol values actually come from
userspace via Netlink interface (NFC_CMD_START_POLL operation). So a
broken or malicious program may pass a message containing a "bad"
combination of protocol parameter values so that dev->poll_mod_count
is not incremented inside pn533_poll_create_mod_list(), thus leading
to division by zero.
Call trace looks like:
nfc_genl_start_poll()
nfc_start_poll()
->start_poll()
pn533_start_poll()
Add poll mod list filling check.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: dfccd0f580 ("NFC: pn533: Add some polling entropy")
Signed-off-by: Aleksandr Mishin <amishin@t-argos.ru>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20240827084822.18785-1-amishin@t-argos.ru
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEN9lkrMBJgcdVAPub1V2XiooUIOQFAmbPlL4ACgkQ1V2XiooU
IOQyXQ//XtyH2hsgDDFEJ2Wx6L8c68zX9UYoDnOEVy+ivZXUIQkbvqI/HoNN+RWA
XjTCdeEXTNmhTC+GRPD3YL4HxjRiBSDSVuRWr/TQvrkK709+EM+2nOtbkD58h2+M
qv0LWb3q8pGhlOmloMuAo9naKMx2ZuG0a4zGOWwhbrTrpHvgSpb1XrAB4iEz2bSK
i9I1Ys/kGlR7HoMAhkj/C729DTl655s+W7T73HNp9ne5Mj07KLL6HLuw3+3XYJhz
I32w/zXZ8+x0OxxMk1OrfULBQpYZRldvBGWtdNm3h9hQDtHd3PUcTMNPLu+0NvVF
eqlpN02Zn/O/3yqWHwJniSZng/G+yzhw9ToSe/50R35jhY5IdNKMQogYQaH3eW2n
35Ge+SFACWvHnqsKyIERrbQMBBRN9eC/L/Epp/a2IlBGz+ob0xg8yjoBn9VdHN/H
lrKJhEFnsan8X9y68MXWgp0OSdxHZkLpmhjm6q5Pv8SpdhnnPc+DQWwl9ihwnoGi
veDhlD2h0xcMUzYXNgQ5Pj6oU+pWELIWDLSzE7q8NnODs6ig13jrSFV/j/wTPmWs
8gBy+9YPTw6qUHxVLjl9cDS0W7i5/+OA32z+FU8wH506YFbv58Gq5i1KcORxT780
CAfc1A0wNwNUEbMudWGprf+Vjh/ffWitRCe6wcYL8sSKjCZ2r1g=
=baH4
-----END PGP SIGNATURE-----
Merge tag 'nf-24-08-28' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
Patch #1 sets on NFT_PKTINFO_L4PROTO for UDP packets less than 4 bytes
payload from netdev/egress by subtracting skb_network_offset() when
validating IPv4 packet length, otherwise 'meta l4proto udp' never
matches.
Patch #2 subtracts skb_network_offset() when validating IPv6 packet
length for netdev/egress.
netfilter pull request 24-08-28
* tag 'nf-24-08-28' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nf_tables_ipv6: consider network offset in netdev/egress validation
netfilter: nf_tables: restore IP sanity checks for netdev/egress
====================
Link: https://patch.msgid.link/20240828214708.619261-1-pablo@netfilter.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Matthieu Baerts says:
====================
mptcp: more fixes for the in-kernel PM
Here is a new batch of fixes for the MPTCP in-kernel path-manager:
Patch 1 ensures the address ID is set to 0 when the path-manager sends
an ADD_ADDR for the address of the initial subflow. The same fix is
applied when a new subflow is created re-using this special address. A
fix for v6.0.
Patch 2 is similar, but for the case where an endpoint is removed: if
this endpoint was used for the initial address, it is important to send
a RM_ADDR with this ID set to 0, and look for existing subflows with the
ID set to 0. A fix for v6.0 as well.
Patch 3 validates the two previous patches.
Patch 4 makes the PM selecting an "active" path to send an address
notification in an ACK, instead of taking the first path in the list. A
fix for v5.11.
Patch 5 fixes skipping the establishment of a new subflow if a previous
subflow using the same pair of addresses is being closed. A fix for
v5.13.
Patch 6 resets the ID linked to the initial subflow when the linked
endpoint is re-added, possibly with a different ID. A fix for v6.0.
Patch 7 validates the three previous patches.
Patch 8 is a small fix for the MPTCP Join selftest, when being used with
older subflows not supporting all MIB counters. A fix for a commit
introduced in v6.4, but backported up to v5.10.
Patch 9 avoids the PM to try to close the initial subflow multiple
times, and increment counters while nothing happened. A fix for v5.10.
Patch 10 stops incrementing local_addr_used and add_addr_accepted
counters when dealing with the address ID 0, because these counters are
not taking into account the initial subflow, and are then not
decremented when the linked addresses are removed. A fix for v6.0.
Patch 11 validates the previous patch.
Patch 12 avoids the PM to send multiple SUB_CLOSED events for the
initial subflow. A fix for v5.12.
Patch 13 validates the previous patch.
Patch 14 stops treating the ADD_ADDR 0 as a new address, and accepts it
in order to re-create the initial subflow if it has been closed, even if
the limit for *new* addresses -- not taking into account the address of
the initial subflow -- has been reached. A fix for v5.10.
Patch 15 validates the previous patch.
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
---
Matthieu Baerts (NGI0) (15):
mptcp: pm: reuse ID 0 after delete and re-add
mptcp: pm: fix RM_ADDR ID for the initial subflow
selftests: mptcp: join: check removing ID 0 endpoint
mptcp: pm: send ACK on an active subflow
mptcp: pm: skip connecting to already established sf
mptcp: pm: reset MPC endp ID when re-added
selftests: mptcp: join: check re-adding init endp with != id
selftests: mptcp: join: no extra msg if no counter
mptcp: pm: do not remove already closed subflows
mptcp: pm: fix ID 0 endp usage after multiple re-creations
selftests: mptcp: join: check re-re-adding ID 0 endp
mptcp: avoid duplicated SUB_CLOSED events
selftests: mptcp: join: validate event numbers
mptcp: pm: ADD_ADDR 0 is not a new address
selftests: mptcp: join: check re-re-adding ID 0 signal
net/mptcp/pm.c | 4 +-
net/mptcp/pm_netlink.c | 87 ++++++++++----
net/mptcp/protocol.c | 6 +
net/mptcp/protocol.h | 5 +-
tools/testing/selftests/net/mptcp/mptcp_join.sh | 153 ++++++++++++++++++++----
tools/testing/selftests/net/mptcp/mptcp_lib.sh | 4 +
6 files changed, 209 insertions(+), 50 deletions(-)
---
base-commit: 3a0504d54b
change-id: 20240826-net-mptcp-more-pm-fix-ffa61a36f817
Best regards,
====================
Link: https://patch.msgid.link/20240828-net-mptcp-more-pm-fix-v2-0-7f11b283fff7@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This test extends "delete re-add signal" to validate the previous
commit: when the 'signal' endpoint linked to the initial subflow (ID 0)
is re-added multiple times, it will re-send the ADD_ADDR with id 0. The
client should still be able to re-create this subflow, even if the
add_addr_accepted limit has been reached as this special address is not
considered as a new address.
The 'Fixes' tag here below is the same as the one from the previous
commit: this patch here is not fixing anything wrong in the selftests,
but it validates the previous fix for an issue introduced by this commit
ID.
Fixes: d0876b2284 ("mptcp: add the incoming RM_ADDR support")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The ADD_ADDR 0 with the address from the initial subflow should not be
considered as a new address: this is not something new. If the host
receives it, it simply means that the address is available again.
When receiving an ADD_ADDR for the ID 0, the PM already doesn't consider
it as new by not incrementing the 'add_addr_accepted' counter. But the
'accept_addr' might not be set if the limit has already been reached:
this can be bypassed in this case. But before, it is important to check
that this ADD_ADDR for the ID 0 is for the same address as the initial
subflow. If not, it is not something that should happen, and the
ADD_ADDR can be ignored.
Note that if an ADD_ADDR is received while there is already a subflow
opened using the same address, this ADD_ADDR is ignored as well. It
means that if multiple ADD_ADDR for ID 0 are received, there will not be
any duplicated subflows created by the client.
Fixes: d0876b2284 ("mptcp: add the incoming RM_ADDR support")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This test extends "delete and re-add" and "delete re-add signal" to
validate the previous commit: the number of MPTCP events are checked to
make sure there are no duplicated or unexpected ones.
A new helper has been introduced to easily check these events. The
missing events have been added to the lib.
The 'Fixes' tag here below is the same as the one from the previous
commit: this patch here is not fixing anything wrong in the selftests,
but it validates the previous fix for an issue introduced by this commit
ID.
Fixes: b911c97c7d ("mptcp: add netlink event support")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The initial subflow might have already been closed, but still in the
connection list. When the worker is instructed to close the subflows
that have been marked as closed, it might then try to close the initial
subflow again.
A consequence of that is that the SUB_CLOSED event can be seen twice:
# ip mptcp endpoint
1.1.1.1 id 1 subflow dev eth0
2.2.2.2 id 2 subflow dev eth1
# ip mptcp monitor &
[ CREATED] remid=0 locid=0 saddr4=1.1.1.1 daddr4=9.9.9.9
[ ESTABLISHED] remid=0 locid=0 saddr4=1.1.1.1 daddr4=9.9.9.9
[ SF_ESTABLISHED] remid=0 locid=2 saddr4=2.2.2.2 daddr4=9.9.9.9
# ip mptcp endpoint delete id 1
[ SF_CLOSED] remid=0 locid=0 saddr4=1.1.1.1 daddr4=9.9.9.9
[ SF_CLOSED] remid=0 locid=0 saddr4=1.1.1.1 daddr4=9.9.9.9
The first one is coming from mptcp_pm_nl_rm_subflow_received(), and the
second one from __mptcp_close_subflow().
To avoid doing the post-closed processing twice, the subflow is now
marked as closed the first time.
Note that it is not enough to check if we are dealing with the first
subflow and check its sk_state: the subflow might have been reset or
closed before calling mptcp_close_ssk().
Fixes: b911c97c7d ("mptcp: add netlink event support")
Cc: stable@vger.kernel.org
Tested-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This test extends "delete and re-add" to validate the previous commit:
when the endpoint linked to the initial subflow (ID 0) is re-added
multiple times, it was no longer being used, because the internal linked
counters are not decremented for this special endpoint: it is not an
additional endpoint.
Here, the "del/add id 0" steps are done 3 times to unsure this case is
validated.
The 'Fixes' tag here below is the same as the one from the previous
commit: this patch here is not fixing anything wrong in the selftests,
but it validates the previous fix for an issue introduced by this commit
ID.
Fixes: 3ad14f54bd ("mptcp: more accurate MPC endpoint tracking")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
'local_addr_used' and 'add_addr_accepted' are decremented for addresses
not related to the initial subflow (ID0), because the source and
destination addresses of the initial subflows are known from the
beginning: they don't count as "additional local address being used" or
"ADD_ADDR being accepted".
It is then required not to increment them when the entrypoint used by
the initial subflow is removed and re-added during a connection. Without
this modification, this entrypoint cannot be removed and re-added more
than once.
Reported-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/512
Fixes: 3ad14f54bd ("mptcp: more accurate MPC endpoint tracking")
Reported-by: syzbot+455d38ecd5f655fc45cf@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/00000000000049861306209237f4@google.com
Cc: stable@vger.kernel.org
Tested-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
It is possible to have in the list already closed subflows, e.g. the
initial subflow has been already closed, but still in the list. No need
to try to close it again, and increments the related counters again.
Fixes: 0ee4261a36 ("mptcp: implement mptcp_pm_remove_subflow")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The checksum and fail counters might not be available. Then no need to
display an extra message with missing info.
While at it, fix the indentation around, which is wrong since the same
commit.
Fixes: 47867f0a7e ("selftests: mptcp: join: skip check if MIB counter not supported")
Cc: stable@vger.kernel.org
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The initial subflow has a special local ID: 0. It is specific per
connection.
When a global endpoint is deleted and re-added later, it can have a
different ID, but the kernel should still use the ID 0 if it corresponds
to the initial address.
This test validates this behaviour: the endpoint linked to the initial
subflow is removed, and re-added with a different ID.
Note that removing the initial subflow will not decrement the 'subflows'
counters, which corresponds to the *additional* subflows. On the other
hand, when the same endpoint is re-added, it will increment this
counter, as it will be seen as an additional subflow this time.
The 'Fixes' tag here below is the same as the one from the previous
commit: this patch here is not fixing anything wrong in the selftests,
but it validates the previous fix for an issue introduced by this commit
ID.
Fixes: 3ad14f54bd ("mptcp: more accurate MPC endpoint tracking")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The initial subflow has a special local ID: 0. It is specific per
connection.
When a global endpoint is deleted and re-added later, it can have a
different ID -- most services managing the endpoints automatically don't
force the ID to be the same as before. It is then important to track
these modifications to be consistent with the ID being used for the
address used by the initial subflow, not to confuse the other peer or to
send the ID 0 for the wrong address.
Now when removing an endpoint, msk->mpc_endpoint_id is reset if it
corresponds to this endpoint. When adding a new endpoint, the same
variable is updated if the address match the one of the initial subflow.
Fixes: 3ad14f54bd ("mptcp: more accurate MPC endpoint tracking")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The lookup_subflow_by_daddr() helper checks if there is already a
subflow connected to this address. But there could be a subflow that is
closing, but taking time due to some reasons: latency, losses, data to
process, etc.
If an ADD_ADDR is received while the endpoint is being closed, it is
better to try connecting to it, instead of rejecting it: the peer which
has sent the ADD_ADDR will not be notified that the ADD_ADDR has been
rejected for this reason, and the expected subflow will not be created
at the end.
This helper should then only look for subflows that are established, or
going to be, but not the ones being closed.
Fixes: d84ad04941 ("mptcp: skip connecting the connected address")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Taking the first one on the list doesn't work in some cases, e.g. if the
initial subflow is being removed. Pick another one instead of not
sending anything.
Fixes: 84dfe3677a ("mptcp: send out dedicated ADD_ADDR packet")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Removing the endpoint linked to the initial subflow should trigger a
RM_ADDR for the right ID, and the removal of the subflow. That's what is
now being verified in the "delete and re-add" test.
Note that removing the initial subflow will not decrement the 'subflows'
counters, which corresponds to the *additional* subflows. On the other
hand, when the same endpoint is re-added, it will increment this
counter, as it will be seen as an additional subflow this time.
The 'Fixes' tag here below is the same as the one from the previous
commit: this patch here is not fixing anything wrong in the selftests,
but it validates the previous fix for an issue introduced by this commit
ID.
Fixes: 3ad14f54bd ("mptcp: more accurate MPC endpoint tracking")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The initial subflow has a special local ID: 0. When an endpoint is being
deleted, it is then important to check if its address is not linked to
the initial subflow to send the right ID.
If there was an endpoint linked to the initial subflow, msk's
mpc_endpoint_id field will be set. We can then use this info when an
endpoint is being removed to see if it is linked to the initial subflow.
So now, the correct IDs are passed to mptcp_pm_nl_rm_addr_or_subflow(),
it is no longer needed to use mptcp_local_id_match().
Fixes: 3ad14f54bd ("mptcp: more accurate MPC endpoint tracking")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When the endpoint used by the initial subflow is removed and re-added
later, the PM has to force the ID 0, it is a special case imposed by the
MPTCP specs.
Note that the endpoint should then need to be re-added reusing the same
ID.
Fixes: 3ad14f54bd ("mptcp: more accurate MPC endpoint tracking")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
