Prevent a divide-by-zero by consistently treating an 'active' CRTC
without a mode set as actually disabled.
This looks to have been first introduced with
commit 2492935248
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Mon Jul 2 20:28:59 2012 +0200
drm/i915: read out the modeset hw state at load and resume time
but then combined with
commit b0a2658acb
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Tue Dec 18 09:37:54 2012 +0100
drm/i915: don't disable disconnected outputs
it finally started oopsing.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reported-and-tested-by: Alexey Zaytsev <alexey.zaytsev@gmail.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
vga-switcheroo with apple-gmux does not switch correctly on my system. The PCI
configuration space is not restored correctly, resulting in MSI not working after switch.
Only useful item in dmesg is:
[ 33.922807] radeon 0000:01:00.0: Refused to change power state, currently in D3
I did some testing, dumping the difference in ms between first succesful switch
from D3 to D0, and it seems that there is slightly more than 20 ms difference when
the device is re-enabled through vga-switcheroo.
So bump the re-enable d3 delay to 20 ms to handle this, which fixes msi not working
on my system after switcheroo-ing. Default d3_delay value is PCI_PM_D3_WAIT, 10 ms.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 9756fe38d1.
The bogus lvds output is actually a lvds->hdmi bridge, which we don't
really support. But unconditionally disabling it breaks some existing
setups.
Reported-by: John Tapsell <johnflux@gmail.com>
References: http://permalink.gmane.org/gmane.comp.freedesktop.xorg.drivers.intel/17237
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
As along the error path we do not correct the user pin-count for the
failure, we may end up with userspace believing that it has a pinned
object at offset 0 (when interrupted by a signal for example).
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This patch implements the exynos_drm_crtc_finish_pageflip in
exynos_drm_crtc.c. This avoids the duplication of same code
in mixer, fimd and vidi.
Signed-off-by: Rahul Sharma <rahul.sharma@samsung.com>
Signed-off-by: Stephane Marchesin <marcheu@chromium.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
If fimd is runtime suspended (by DPMS OFF), fimd_suspend does not
call fimd_activate(false) and just returns. Similarily the check in
fimd_resume should not resume if previously runtime_suspended.
Instead the existing check does the opposite. So if fimd was not
runtime suspended, suspend will turn off fimd but resume will not turn
it on. This patch fixes this issue by reversing the condition.
Signed-off-by: Prathyush K <prathyush.k@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Pull radeon and minor nouveau fixes from Dave Airlie:
"Just a radeon pull from Alex, fixes a few regressions since 3.7 and
reworks some of the reset handling, and two minor nouveau fixes I
found on the list, Ben will be back next week to take care of the
couple of larger nouveau patches that I see outstanding."
* 'drm-next' of git://people.freedesktop.org/~airlied/linux:
drm/nouveau: fix init with agpgart-uninorth
drm: nouveau: Fix build warning seen if HWMON is undefined
drm/radeon: switch to a finer grained reset for SI (v2)
drm/radeon: switch to a finer grained reset for cayman/TN
drm/radeon: switch to a finer grained reset for evergreen
drm/radeon: switch to a finer grained reset for r6xx/7xx
drm/radeon: add GPU reset flags
drm/radeon: fix typo in evergreen dma fence
drm/radeon: Properly handle DDC probe for DP bridges
drm/radeon: reset dma engine on gpu reset (v2)
drm/radeon: print dma status reg on lockup (v2)
drm/radeon: improve ring debugfs printing
drm/radeon: add debugfs file for dma rings
drm/radeon/r6xx: fix DMA engine for ttm bo transfers
drm/radeon: add connector table for Mac G4 Silver
- r6xx actually uses a slightly different packet format,
although both formats seem to work ok.
- r7xx doesn't have the count multiple of 2 limitation.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This eliminates the need for explicit clk_put and makes the
cleanup and exit path code simpler.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
devm_request_and_ioremap API checks for NULL. Hence explicit
NULL check is not necessary. Saves some code.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
devm_* APIs are device managed and get freed automatically when the
device detaches. Thus explicit freeing is not needed. This saves some
code.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
This eliminates the need for explicit clk_put and makes the
cleanup and exit path code simpler.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
devm_request_and_ioremap API checks for NULL. Hence explicit
NULL check is not necessary. Saves some code.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
devm_* APIs are device managed and get freed automatically when the
device detaches. Thus explicit freeing is not needed. This saves some
code.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
This eliminates the need for explicit clk_put and makes the
cleanup and exit path code simpler.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
devm_request_and_ioremap API checks for NULL. Hence explicit
NULL check is not necessary. Saves some code.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
devm_* APIs are device managed and get freed automatically when the
device detaches. Thus explicit freeing is not needed. This saves some
code.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
devm_kzalloc makes the code simpler by eliminating the need for
explicit freeing.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
This patch fixes gem buffer allocation type checking.
EXYNOS_BO_CONTIG has 0 so the checking should be fixed
to 'if (!(flags & EXYNOS_BO_NONCONTIG))'
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
This patch removes needless parenthesis.
This was pointed out but in case of fimc side. we missed it.
Signed-off-by: Eunchul Kim <chulspro.kim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
This patch fixes incorrect interrupt induced by m2m operation.
the m2m operation calls s/w reset every frame but there is the case that
the interrupt to m2m operation occures after s/w reset sometimes.
So this patch makes dma and capture operations stop at s/w reset
to avoid incorrect interrupt.
Signed-off-by: Jinyoung Jeon <jy0.jeon@samsung.com>
Signed-off-by: Eunchul Kim <chulspro.kim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
This patch removes color bar pattern register because we don't use the register anymore.
because it doesn't support color bar feature for writeback operation.
camera driver only supports color bar feature. but IPP doesn't support camera driver.
Signed-off-by: JoongMock Shin <jmock.shin@samsung.com>
Signed-off-by: Eunchul Kim <chulspro.kim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
This patch cleanup corrects some comments to abbreviation.
We would like to prevent it stands misunderstood.
Signed-off-by: Eunchul Kim <chulspro.kim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
This patch fixes erroneous register read.
reall function needs register base address + offset but
exynos_drm_gsc module used only offset to read a register.
so this patch uses gsc_read function instead of readl.
Signed-off-by: Eunchul Kim <chulspro.kim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
This patch considers both case of vflip and hflip.
If we want that the contents in buffer to be rotated to 180 degree,
then we can use h,vflip or 180 degree.
Changelog v2:
- added EXYNOS_DRM_FLIP_BOTH enum value to avoid build warnning.
Signed-off-by: Eunchul Kim <chulspro.kim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
This patch removes property error handling. because property couldn't be NULL.
Signed-off-by: Eunchul Kim <chulspro.kim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
This patch change current command name from cmd to c_node.
because we are using the member name, 'cmd', for command control ioctl in another structure.
so, this patch changes it to c_node to avoid such confusing.
Signed-off-by: Eunchul Kim <chulspro.kim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
This patch fixes the issue that when buffer allocation is requested
without iommu, the allocation is failed.
Without iommu, dma_alloc_attrs function allocates some memory region
and returns cpu address so this patch makes the cpu address to be set
to buf->kvaddr correctly.
Changelog v2:
- fix buffer free
. Without iommu, dma_free_attrs function requires kernel space address
as argument. So it changes the argument, buf->pages to buf->kvaddr.
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
This patch changes file license to GPL
Most of exynos files had been copied from some random
file and not updated correctly. So this patch corrects
the file license.
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
This patch considers no iommu support to kernel space mapping
of console framebuffer.
Without iommu, we get physical address instead of device address
after dma_alloc_attrs function is called. So we should consider
the case without iommu when it maps console framebuffer with
kernel space.
Changelog v2:
- calll vunmap function only with iommu support.
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Check that the AGP aperture can be mapped. This follows a similar change
done for Radeon (commit 365048ff, drm/radeon: AGP memory is only I/O if
the aperture can be mapped by the CPU.).
The patch fixes the following error seen on G5 iMac:
nouveau E[ DRM] failed to create kernel channel, -12
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=58806
Cc: stable@vger.kernel.org
Reviewed-by: Michel Dänzer <michel@daenzer.net>
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Fix:
nouveau_pm.c: In function ‘nouveau_hwmon_init’:
nouveau_pm.c:703:24: warning: unused variable ‘therm’ [-Wunused-variable]
Introduced by commit 095f979a (drm/nouveau/pm: fix build with HWMON off) which
fixed a build error but introduced a build warning.
Cc: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
No change in functionality as we currently set all the reset
flags.
v2: fix typo
Reviewed-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
No change in functionality as we currently set all the reset
flags.
Reviewed-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
No change in functionality as we currently set all the reset
flags.
Reviewed-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
No change in functionality as we currently set all the reset
flags.
Reviewed-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The idea here is to move to a finer grained reset.
In some cases we may not need reset every block, and
in other cases we may not need to re-init the entire
asic.
Reviewed-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
CONFIG_HOTPLUG is going away as an option. As a result, the __dev*
markings need to be removed.
This change removes the use of __devinit, __devexit_p, and __devexit
from these drivers.
Based on patches originally written by Bill Pemberton, but redone by me
in order to handle some of the coding style issues better, by hand.
Cc: Bill Pemberton <wfp5p@virginia.edu>
Cc: David Airlie <airlied@linux.ie>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
DDC information can be accessed using AUX CH
Fixes failure to probe monitors on some systems with
DP bridge chips.
agd5f: minor fixes
Signed-off-by: Niels Ole Salscheider <niels_ole@salscheider-online.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
This try to reset the dma engine when performing gpu reset. Hopefully
bringing back the gpu dma engine in sane state.
v2: agd5f: fix dma reset on cayman/TN, add support for SI
Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To help debug dma related lockup.
v2: agd5f: update SI as well
Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Print 32dword before last know rptr as problem most likely comes
from previous command. Also small cosmetic change to the printing.
Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
count must be a multiple of 2. Fixes crashes on
R6xx chips reported by a number of people.
Cc: Borislav Petkov <bp@alien8.de>
Cc: Markus Trippelsdorf <markus@trippelsdorf.de>
Reviewed-by: Jerome Glisse <jglisse@redhat.com>
Tested-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Apple cards do not provide data tables in the vbios
so we have to hard code the connector parameters
in the driver.
Reported-by: Albrecht Dreß <albrecht.dress@arcor.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
This reverts commit 83c0bcb694.
Lucas pointed out this was a mistake, and I missed the discussion,
so just revert it out to save a rebase.
Signed-off-by: Dave Airlie <airlied@redhat.com>
The intention is to program exactly WIN_A, not WIN_A and possibly
others.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Dave Airlie <airlied@redhat.com>
There is no gem.c anymore, those functions are implemented by the
drm_cma_helpers now.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Dave Airlie <airlied@redhat.com>
The 720p and 1080p entries are completely redundant, as we are matching
the table entries against <=pclk.
Also generalize the comment, as we are using those table entries even
when driving other modes than the standard TV ones.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Window properties are programmed through a shared aperture and have to
happen atomically. Also we do the read-update-write dance on some of the
shared regs.
To make sure that different functions don't stumble over each other
protect the register access with a mutex.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Dave Airlie <airlied@redhat.com>
No real problem for now, as nothing is using this, but leaving it
unitialized is asking for trouble later on.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Fixes wrong picture offset observed when using HDMI output with a
Technisat HD TV.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Acked-by: Mark Zhang <markz@nvidia.com>
Tested-by: Mark Zhang <markz@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Some fixes for 3.8:
- Watermark fixups from Chris Wilson (4 pieces).
- 2 snb workarounds, seem to be recently added to our internal DB.
- workaround for the infamous i830/i845 hang, seems now finally solid!
Based on Chris' fix for SNA, now also for UXA/mesa&old SNA.
- Some more fixlets for shrinker-pulls-the-rug issues (Chris&me).
- Fix dma-buf flags when exporting (you).
- Disable the VGA plane if it's enabled on lid open - similar fix in
spirit to the one I've sent you last weeek, BIOS' really like to mess
with the display when closing the lid (awesome debug work from Krzysztof
Mazur).
* 'drm-intel-fixes' of git://people.freedesktop.org/~danvet/drm-intel:
drm/i915: disable shrinker lock stealing for create_mmap_offset
drm/i915: optionally disable shrinker lock stealing
drm/i915: fix flags in dma buf exporting
i915: ensure that VGA plane is disabled
drm/i915: Preallocate the drm_mm_node prior to manipulating the GTT drm_mm manager
drm: Export routines for inserting preallocated nodes into the mm manager
drm/i915: don't disable disconnected outputs
drm/i915: Implement workaround for broken CS tlb on i830/845
drm/i915: Implement WaSetupGtModeTdRowDispatch
drm/i915: Implement WaDisableHiZPlanesWhenMSAAEnabled
drm/i915: Prefer CRTC 'active' rather than 'enabled' during WM computations
drm/i915: Clear self-refresh watermarks when disabled
drm/i915: Double the cursor self-refresh latency on Valleyview
drm/i915: Fixup cursor latency used for IVB lp3 watermarks
Misc fixes for reset and new packets for userspace usage.
* 'drm-fixes-3.8' of git://people.freedesktop.org/~agd5f/linux:
drm/radeon: add WAIT_UNTIL to evergreen VM safe reg list
drm/radeon: add support for MEM_WRITE packet
drm/radeon: restore modeset late in GPU reset path
drm/radeon: avoid deadlock in pm path when waiting for fence
drm/radeon: don't leave fence blocked process on failed GPU reset
Modesetting seems to work alright, as does graphics (using binary driver
fuc from nve7...).
Lots to be done no doubt, but this'll get an image on the screen for
people.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
The mmap offset structure is not part of the drm/i915 code, but
provided by gem helpers. To avoid leaky abstractions (by either
depending upon implementation details of said helper wrt to
preallocations, or reimplementing it in our code and so fuzzing
around in internal details of that helpr) simply disable
the shrinker lock stealing accross calls into the helper functions.
This should fix igt/gem_tiled_swapping.
v2: Fix cleanup path confusion bemoaned by Chris Wilson.
Reported-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
commit 5774506f15
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date: Wed Nov 21 13:04:04 2012 +0000
drm/i915: Borrow our struct_mutex for the direct reclaim
added a nice trick to steal the struct_mutex lock in the shrinker if
it's the current task holding it. But this also caused the requirement
that every place which allocates memory needs to be careful about the
gem state of objects, since the shrinker could have pulled the rug out
from under it. We've usually solved this by carefully preallocating
things or ensure that buffers are pinned already.
But the shrinker also reaps mmap offset, so allocating those needs to
be careful, too. Now that code has been factored out into some common
helpers, so either we have fragile code depending upon the common
helper not doing something we don't want it to do. Or we need to
reimplement the mmap offset creation and so also leak implementation
details into our code.
Since this all results in leaky abstraction, cop out by disabling the
lock borrowing trick while calling down into the helpers. That way our
craziness is nicely confined to files in drm/i915.
v2: Split out the change to create_mmap_offset as request by Chris Wilson.
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
As pointed out by Seung-Woo Kim this should have been
passing flags like nouveau/radeon have.
Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Pull drm bugfix from Dave Airlie:
"Just a single urgent regression fix, seeing a few wierd behaviours I'd
like not to persist."
* 'drm-next' of git://people.freedesktop.org/~airlied/linux:
drm/ttm: fix delayed ttm_bo_cleanup_refs_and_unlock delayed handling
To make it easier to debug some lockup from userspace add support
to MEM_WRITE packet.
Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Modeset path seems to conflict sometimes with the memory management
leading to kernel deadlock. This move modesetting reset after GPU
acceleration reset.
Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
radeon_fence_wait_empty_locked should not trigger GPU reset as no
place where it's call from would benefit from such thing and it
actually lead to a kernel deadlock in case the reset is triggered
from pm codepath. Instead force ring completion in place where it
makes sense or return early in others.
Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Force all fence to signal if GPU reset failed so no process get stuck
on waiting fence.
Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Some broken systems (like HP nc6120) in some cases, usually after LID
close/open, enable VGA plane, making display unusable (black screen on LVDS,
some strange mode on VGA output). We used to disable VGA plane only once at
startup. Now we also check, if VGA plane is still disabled while changing
mode, and fix that if something changed it.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=57434
Signed-off-by: Krzysztof Mazur <krzysiek@podlesie.net>
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
As we may reap neighbouring objects in order to free up pages for
allocations, we need to be careful not to allocate in the middle of the
drm_mm manager. To accomplish this, we can simply allocate the
drm_mm_node up front and then use the combined search & insert
drm_mm routines, reducing our code footprint in the process.
Fixes (partially) i-g-t/gem_tiled_swapping
Reported-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
[danvet: Again fixup atomic bikeshed.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Required by i915 in order to avoid the allocation in the middle of
manipulating the drm_mm lists.
Use a pair of stubs to preserve the existing EXPORT_SYMBOLs for
backporting; to be removed later.
Cc: Dave Airlie <airlied@redhat.com>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
[danvet: bikeshedded-away the atomic parameter, it's not yet used
anywhere.]
Acked-by: Dave Airlie <airlied@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This piece of neat lore has been ported painstakingly and bug-for-bug
compatible from the old crtc helper code.
Imo it's utter nonsense.
If you disconnected a cable and before you reconnect it, userspace (or
the kernel) does an set_crtc call, this will result in that connector
getting disabled. Which will result in a nice black screen when
plugging in the cable again.
There's absolutely no reason the kernel does such policy enforcements
- if userspace tries to set up a mode on something disconnected we
might fail loudly (since the dp link training fails), but silently
adjusting the output configuration behind userspace's back is a recipe
for disaster. Specifically I think that this could explain some of our
MI_WAIT hangs around suspend, where userspace issues a scanline wait
on a disable pipe. This mechanisims here could explain how that pipe
got disabled without userspace noticing.
Note that this fixes a NULL deref at BIOS takeover when the firmware
sets up a disconnected output in a clone configuration with a
connected output on the 2nd pipe: When doing the full modeset we don't
have a mode for the 2nd pipe and OOPS. On the first pipe this doesn't
matter, since at boot-up the fbdev helpers will set up the choosen
configuration on that on first. Since this is now the umptenth bug
around handling this imo brain-dead semantics correctly, I think it's
time to kill it and see whether there's any userspace out there which
relies on this.
It also nicely demonstrates that we have a tiny window where DP
hotplug can still kill the driver.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=58396
Cc: stable@vger.kernel.org
Tested-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Now that Chris Wilson demonstrated that the key for stability on early
gen 2 is to simple _never_ exchange the physical backing storage of
batch buffers I've tried a stab at a kernel solution. Doesn't look too
nefarious imho, now that I don't try to be too clever for my own good
any more.
v2: After discussing the various techniques, we've decided to always blit
batches on the suspect devices, but allow userspace to opt out of the
kernel workaround assume full responsibility for providing coherent
batches. The principal reason is that avoiding the blit does improve
performance in a few key microbenchmarks and also in cairo-trace
replays.
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
[danvet:
- Drop the hunk which uses HAS_BROKEN_CS_TLB to implement the ring
wrap w/a. Suggested by Chris Wilson.
- Also add the ACTHD check from Chris Wilson for the error state
dumping, so that we still catch batches when userspace opts out of
the w/a.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Pull DRM updates from Dave Airlie:
"This is the one and only next pull for 3.8, we had a regression we
found last week, so I was waiting for that to resolve itself, and I
ended up with some Intel fixes on top as well.
Highlights:
- new driver: nvidia tegra 20/30/hdmi support
- radeon: add support for previously unused DMA engines, more HDMI
regs, eviction speeds ups and fixes
- i915: HSW support enable, agp removal on GEN6, seqno wrapping
- exynos: IPP subsystem support (image post proc), HDMI
- nouveau: display class reworking, nv20->40 z compression
- ttm: start of locking fixes, rcu usage for lookups,
- core: documentation updates, docbook integration, monotonic clock
usage, move from connector to object properties"
* 'drm-next' of git://people.freedesktop.org/~airlied/linux: (590 commits)
drm/exynos: add gsc ipp driver
drm/exynos: add rotator ipp driver
drm/exynos: add fimc ipp driver
drm/exynos: add iommu support for ipp
drm/exynos: add ipp subsystem
drm/exynos: support device tree for fimd
radeon: fix regression with eviction since evict caching changes
drm/radeon: add more pedantic checks in the CP DMA checker
drm/radeon: bump version for CS ioctl support for async DMA
drm/radeon: enable the async DMA rings in the CS ioctl
drm/radeon: add VM CS parser support for async DMA on cayman/TN/SI
drm/radeon/kms: add evergreen/cayman CS parser for async DMA (v2)
drm/radeon/kms: add 6xx/7xx CS parser for async DMA (v2)
drm/radeon: fix htile buffer size computation for command stream checker
drm/radeon: fix fence locking in the pageflip callback
drm/radeon: make indirect register access concurrency-safe
drm/radeon: add W|RREG32_IDX for MM_INDEX|DATA based mmio accesss
drm/exynos: support extended screen coordinate of fimd
drm/exynos: fix x, y coordinates for right bottom pixel
drm/exynos: fix fb offset calculation for plane
...
I'm not really sure, since the w/a entry is as thin on details as
ever, and Bspec doesn't say anything about it. But I've figured only
dispatching to rows 0&1 instead of all four should be the right thing
for GT1.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com>
[danvet: Add the missing snb server GT1 to the check, spotted by Chris
Wilson.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Quoting from Bspec, 3D_CHICKEN1, bit 10
This bit needs to be set always to "1", Project: DevSNB "
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Only the intel_crtc->active is accurate at the point where we wish to
perform WM computations, so use it instead of crtc->enabled.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
If we elect to disable self-refresh as they require too many FIFO
entries, clear the values prior to writing them into the registers. If
they are too large they may occupy more bits than available and so
corrupt neighbouring WM values.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
It operates at twice the declared latency, so double the latency value
used for the cursor watermark calculation.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=50248
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
CC: Jesse Barnes <jbarnes@virtuousgeek.org>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
It operates at twice the declared latency, so adjust the computation to
avoid potential flicker at low power.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=50248
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
CC: Jesse Barnes <jbarnes@virtuousgeek.org>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel writes:
A few leftover fixes for 3.8:
- VIC support for hdmi infoframes with the associated drm helper, fixes
some black TVs (Paulo Zanoni)
- Modeset state check (and fixup if the BIOS messed with the hw) for
lid-open. modeset-rework fallout. Somehow the original reporter went
awol, so this stalled for way too long until we've found a new
victim^Wreporter with broken BIOS.
- seqno wrap fixes from Mika and Chris.
- Some minor fixes all over from various people.
- Another race fix in the pageflip vs. unpin code from Chris.
- hsw vga resume support and a few more fdi link fixes (only used for vga
on hsw) from Paulo.
- Regression fix for DMAR from Zhenyu Wang - I've scavenged memory from my
DMAR for a while and it broke right away :(
- Regression fix from Takashi Iwai for ivb lvds - some w/a needs to be
(partially) moved back into place. Note that these are regressions in
-next.
- One more fix for ivb 3 pipe support - it now actually seems to work.
* 'drm-intel-fixes' of git://people.freedesktop.org/~danvet/drm-intel: (25 commits)
drm/i915: Fix missed needs_dmar setting
drm/i915: Fix shifted screen on top of LVDS on IVY laptop
drm/i915: disable cpt phase pointer fdi rx workaround
drm/i915: set the LPT FDI RX polarity reversal bit when needed
drm/i915: add lpt_init_pch_refclk
drm/i915: add support for mPHY destination on intel_sbi_{read, write}
drm/i915: reject modes the LPT FDI receiver can't handle
drm/i915: fix hsw_fdi_link_train "retry" code
drm/i915: Close race between processing unpin task and queueing the flip
drm/i915: fixup l3 parity sysfs access check
drm/i915: Clear the existing watermarks for g4x when modifying the cursor sr
drm/i915: do not access BLC_PWM_CTL2 on pre-gen4 hardware
drm/i915: Don't allow ring tail to reach the same cacheline as head
drm/i915: Decouple the object from the unbound list before freeing pages
drm/i915: Set sync_seqno properly after seqno wrap
drm/i915: Include the last semaphore sync point in the error-state
drm/i915: Rearrange code to only have a single method for waiting upon the ring
drm/i915: Simplify flushing activity on the ring
drm/i915: Preallocate next seqno before touching the ring
drm/i915: force restore on lid open
...
Inki writes:
"- add dmabuf attach/detach feature
. This patch would resolve performance deterioration issue
when v4l2-based driver is using the buffer imported from gem.
- drm/exynos: use DMA_ATTR_NO_KERNEL_MAPPING attribute
. With gem allocation, kernel space mapping isn't allocated and
also physical pages aren't mapped with the kernel space.
The physical pages are mapped with kernel space though vmap
function only for console framebuffer.
- add the below two patches I missed.
drm: exynos: moved exynos drm device registration to drm driver
drm: exynos: moved exynos drm hdmi device registration to drm driver
- add IPP subsystem framework and its-based device drivers.
. This patch set includes fimc, rotator and gsc drivers to perform
image scaling, rotation and color space conversion.
- add runtime pm support to hdmi driver.
- And fixups and cleanups."
* 'exynos-drm-next' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos: (30 commits)
drm/exynos: add gsc ipp driver
drm/exynos: add rotator ipp driver
drm/exynos: add fimc ipp driver
drm/exynos: add iommu support for ipp
drm/exynos: add ipp subsystem
drm/exynos: support device tree for fimd
drm/exynos: support extended screen coordinate of fimd
drm/exynos: fix x, y coordinates for right bottom pixel
drm/exynos: fix fb offset calculation for plane
drm/exynos: hdmi: Fix potential NULL pointer dereference error
drm/exynos: hdmi: Add CONFIG_OF and use of_match_ptr() macro
drm/exynos: add support for hdmiphy power control for exynos5
drm/exynos: add runtime pm support for mixer
drm/exynos: added runtime pm support for hdmi
drm/exynos: fix allocation and cache mapping type
drm/exynos: reorder framebuffer init sequence
drm/exynos/iommu: fix return value check in drm_create_iommu_mapping()
drm/exynos: remove unused vaddr member
drm/exynos: use DMA_ATTR_NO_KERNEL_MAPPING attribute
drm/exynos: add exception codes to exynos_drm_fbdev_create()
...
This patch adds IPP subsystem-based gsc driver for exynos5 series.
GSC is stand for General SCaler and supports the following features:
- image scaler/rotator/crop/flip/csc and input/output DMA operations.
- image rotation and image effect functions.
- writeback and display output operations.
- M2M operation to crop, scale, rotation and csc.
The below is GSC hardware path:
Memory------->GSC------>Memory
FIMD--------->GSC------>HDMI
FIMD--------->GSC------>Memory
Memory------->GSC------>FIMD, Mixer
This driver is registered to IPP subsystem framework to be used by user side
and user can control the GSC hardware through some interfaces of IPP subsystem
framework.
Changelog v1 ~ v5:
- added comments, code fixups and cleanups.
Signed-off-by: Eunchul Kim <chulspro.kim@samsung.com>
Signed-off-by: Jinyoung Jeon <jy0.jeon@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin.park <kyungmin.park@samsung.com>
This patch adds IPP subsystem-based rotator driver.
And Rotator supports the following features.
- Image crop operation support.
- Rotate operation support to 90, 180 or 270 degree.
- Flip operation support to vertical, horizontal or both.
. as limitaions, the pixel format to source buffer should be
same as the one to destination buffer and no scaler.
This driver is registered to IPP subsystem framework to be used by user side
and user can control the Rotator hardware through some interfaces of IPP
subsystem framework.
Changelog v6:
- fix build warning.
Changelog v1 ~ v5:
- added comments, code fixups and cleanups.
Signed-off-by: Eunchul Kim <chulspro.kim@samsung.com>
Signed-off-by: Youngjun Cho <yj44.cho@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
FIMC is stand for Fully Interfactive Mobile Camera and
supports image scaler/rotator/crop/flip/csc and input/output DMA operations
and also supports writeback and display output operations.
This driver is registered to IPP subsystem framework to be used by user side
and user can control the FIMC hardware through some interfaces of IPP subsystem
framework.
Changelog v6:
- fix build warning.
Changelog v1 ~ v5:
- add comments, code fixups and cleanups.
Signed-off-by: Eunchul Kim <chulspro.kim@samsung.com>
Signed-off-by: Jinyoung Jeon <jy0.jeon@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
This patch adds iommu support for IPP subsystem framework.
For this, it adds subdrv_probe/remove callback to enable or
disable ipp iommu.
We can get or put device address to a gem handle from user
through exynos_drm_gem_get/put_dma_addr().
Signed-off-by: Eunchul Kim <chulspro.kim@samsung.com>
Signed-off-by: Jinyoung Jeon <jy0.jeon@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
This patch adds Image Post Processing(IPP) support for exynos drm driver.
IPP supports image scaler/rotator and input/output DMA operations
using IPP subsystem framework to control FIMC, Rotator and GSC hardware
and supports some user interfaces for user side.
And each IPP-based drivers support Memory to Memory operations
with various converting. And in case of FIMC hardware, it also supports
Writeback and Display output operations through local path.
Features:
- Memory to Memory operation support.
- Various pixel formats support.
- Image scaling support.
- Color Space Conversion support.
- Image crop operation support.
- Rotate operation support to 90, 180 or 270 degree.
- Flip operation support to vertical, horizontal or both.
- Writeback operation support to display blended image of FIMD fifo on screen
A summary to IPP Subsystem operations:
First of all, user should get property capabilities from IPP subsystem
and set these properties to hardware registers for desired operations.
The properties could be pixel format, position, rotation degree and
flip operation.
And next, user should set source and destination buffer data using
DRM_EXYNOS_IPP_QUEUE_BUF ioctl command with gem handles to source and
destinition buffers.
And next, user can control user-desired hardware with desired operations
such as play, stop, pause and resume controls.
And finally, user can aware of dma operation completion and also get
destination buffer that it contains user-desried result through dequeue
command.
IOCTL commands:
- DRM_EXYNOS_IPP_GET_PROPERTY
. get ipp driver capabilitis and id.
- DRM_EXYNOS_IPP_SET_PROPERTY
. set format, position, rotation, flip to source and destination buffers
- DRM_EXYNOS_IPP_QUEUE_BUF
. enqueue/dequeue buffer and make event list.
- DRM_EXYNOS_IPP_CMD_CTRL
. play/stop/pause/resume control.
Event:
- DRM_EXYNOS_IPP_EVENT
. a event to notify dma operation completion to user side.
Basic control flow:
Open -> Get properties -> User choose desired IPP sub driver(FIMC, Rotator
or GSCALER) -> Set Property -> Create gem handle -> Enqueue to source and
destination buffers -> Command control(Play) -> Event is notified to User
-> User gets destinition buffer complated -> (Enqueue to source and
destination buffers -> Event is notified to User) * N -> Queue/Dequeue to
source and destination buffers -> Command control(Stop) -> Free gem handle
-> Close
Changelog v1 ~ v5:
- added comments, code fixups and cleanups.
Signed-off-by: Eunchul Kim <chulspro.kim@samsung.com>
Signed-off-by: Jinyoung Jeon <jy0.jeon@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
This adds the of_match_table to exynos-drm fimd driver to be probed from
the device tree.
Changelog v2:
- fix build error without CONFIG_OF.
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Since 0d0b3e7443
drm/radeon: use cached memory when evicting for vram on non agp
evicting from TTM would try and evict to TTM instead of system,
not so good.
This should fix:
https://bugs.freedesktop.org/show_bug.cgi?id=58272
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This enables the functionality added in the previous
patches. Userspace acceleration drivers can use the
CS ioctl to submit command buffers to the async DMA
rings.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Allows us to use the DMA ring from userspace.
DMA doesn't have a good NOP packet in which to embed the
reloc idx, so userspace has to add a reloc for each
buffer used and order them to match the command stream.
v2: fix address bounds checking
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Allows us to use the DMA ring from userspace.
DMA doesn't have a good NOP packet in which to embed the
reloc idx, so userspace has to add a reloc for each
buffer used and order them to match the command stream.
v2: fix address bounds checking, reloc indexing
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix the size computation of the htile buffer.
Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We need to hold bdev->fence_lock while grabbing a reference to
the fence, to prevent concurrent clearing/changing of the
ttm_bo->sync_obj field.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
With the new per-crtc locking mutliple set-cursor calls could happen
in parallel. Out of sheer paranoia I've opted for an irqsave spinlock.
But if there's indeed an access from interrupt contexts to these regs
it's already broken with the old code, so this can likely just be
reduced to a normal spinlock. Otoh the pageflip completion happens
from the vblank irq handler ...
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Just refactoring to make the next patche simpler. Now all indirect register
access in the new modesetting driver should go through the r100_mm_(w|r)reg
fucntions.
RADEON_READ_MM from the old driver seems to be totally unused, so just kill
it.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The x, y coordinates of right bottom pixel cannot be negative numbers.
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
There is no any reason to change fb offset when CRTC is out of screen.
Also, this fixes a typing error.
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
This is an unlikely case. However to silence the following smatch error
add a NULL check:
drivers/gpu/drm/exynos/exynos_hdmi.c:2486 hdmi_probe()
error: potential NULL dereference 'match'.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Add CONFIG_OF to compile conditionally. of_match_ptr eliminates having
an #ifdef returning NULL for the case when OF is disabled.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
This patch adds support for controlling power of hdmi phy for
exynos5 soc. A special bit is provided in exynos5 for directly
switching of PHY while in exynos4, phy power needs to be controlled
through i2c settings. I2C configuration may affect the suspend to
resume and wake-up time requirements hence not added.
Signed-off-by: Rahul Sharma <rahul.sharma@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
This patch adds support for runtime power management for
drm mixer driver.
Signed-off-by: Rahul Sharma <rahul.sharma@samsung.com>
Signed-off-by: Shirish S <s.shirish@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
This patch adds runtime power management support for exynos drm
hdmi driver.
Signed-off-by: Rahul Sharma <rahul.sharma@samsung.com>
Signed-off-by: Shirish S <s.shirish@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
This patch fixes memory alloction(contiguous or not) and
cache mapping types(cachable or not).
For this, it converts each type from user request into dma
attribute properly.
Changelog v2:
- just code cleanup.
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
For user framebuffers it's easier to just inline the
exynos_drm_framebuffer_init helper instead of trying to adjust it -
most of the things that helper sets up need to be overwritten anyway
again due to the multiple backing storage objects support exynos has,
but does not use for the fbdev.
Changelog v2:
- fix NULL point issue to first gem object of exynos drm framebuffer.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Pull s390 update from Martin Schwidefsky:
"Add support to generate code for the latest machine zEC12, MOD and XOR
instruction support for the BPF jit compiler, the dasd safe offline
feature and the big one: the s390 architecture gets PCI support!!
Right before the world ends on the 21st ;-)"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (41 commits)
s390/qdio: rename the misleading PCI flag of qdio devices
s390/pci: remove obsolete email addresses
s390/pci: speed up __iowrite64_copy by using pci store block insn
s390/pci: enable NEED_DMA_MAP_STATE
s390/pci: no msleep in potential IRQ context
s390/pci: fix potential NULL pointer dereference in dma_free_seg_table()
s390/pci: use kmem_cache_zalloc instead of kmem_cache_alloc/memset
s390/bpf,jit: add support for XOR instruction
s390/bpf,jit: add support MOD instruction
s390/cio: fix pgid reserved check
vga: compile fix, disable vga for s390
s390/pci: add PCI Kconfig options
s390/pci: s390 specific PCI sysfs attributes
s390/pci: PCI hotplug support via SCLP
s390/pci: CHSC PCI support for error and availability events
s390/pci: DMA support
s390/pci: PCI adapter interrupts for MSI/MSI-X
s390/bitops: find leftmost bit instruction support
s390/pci: CLP interface
s390/pci: base support
...
From Ben's AGP dependence removal change, "needs_dmar" flag has not
been properly setup for new chips using new GTT init function. This
one adds missed setting of that flag to make sure we do pci mappings
with IOMMU enabled.
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Pull trivial branch from Jiri Kosina:
"Usual stuff -- comment/printk typo fixes, documentation updates, dead
code elimination."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (39 commits)
HOWTO: fix double words typo
x86 mtrr: fix comment typo in mtrr_bp_init
propagate name change to comments in kernel source
doc: Update the name of profiling based on sysfs
treewide: Fix typos in various drivers
treewide: Fix typos in various Kconfig
wireless: mwifiex: Fix typo in wireless/mwifiex driver
messages: i2o: Fix typo in messages/i2o
scripts/kernel-doc: check that non-void fcts describe their return value
Kernel-doc: Convention: Use a "Return" section to describe return values
radeon: Fix typo and copy/paste error in comments
doc: Remove unnecessary declarations from Documentation/accounting/getdelays.c
various: Fix spelling of "asynchronous" in comments.
Fix misspellings of "whether" in comments.
eisa: Fix spelling of "asynchronous".
various: Fix spelling of "registered" in comments.
doc: fix quite a few typos within Documentation
target: iscsi: fix comment typos in target/iscsi drivers
treewide: fix typo of "suport" in various comments and Kconfig
treewide: fix typo of "suppport" in various comments
...
In case of error, function arm_iommu_create_mapping() returns
ERR_PTR() and never returns NULL. The NULL test in the return
value check should be replaced with IS_ERR().
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
This patch removes vaddr member from exynos_drm_overlay structure
and also relevant codes for code cleanup.
Signed-off-by: YoungJun Cho <yj44.cho@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Changelog v3:
just code cleanup.
Changelog v2:
fix argument to dma_mmap_attr function.
- use pages instead of kvaddr because kvaddr is 0 with
DMA_ATTR_NO_KERNEL_MAPPING.
Changelog v1:
When gem allocation is requested, kernel space mapping isn't needed.
But if need, such as console framebuffer, the physical pages would be
mapped with kernel space though vmap function.
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Changelog v2:
Added details of original patch in chromium kernel
Changelog v1:
When fimd is turned off, we disable the clocks which will stop
the dma. Now if we remove the current framebuffer, we cannot
disable the overlay but the current framebuffer will still be freed.
When fimd resumes, the dma will continue from where it left off
and will throw a PAGE FAULT since the memory was freed.
This patch fixes the above problem by disabling the fimd windows
before disabling the fimd clocks. It also keeps track of which
windows were currently active by setting the 'resume' flag. When
fimd resumes, the window with a resume flag set is enabled again.
Now if a current fb is removed when fimd is off, fimd_win_disable
will set the 'resume' flag of that window to zero and return.
So when fimd resumes, that window will not be resumed.
This patch is based on the following two patches:
http://git.chromium.org/gitweb/?p=chromiumos/third_party/kernel.git;a=commitdiff;h=341e973c967304976a762211b6465b0074de62efhttp://git.chromium.org/gitweb/?p=chromiumos/third_party/kernel.git;a=commitdiff;h=cfa22e49b7408547c73532c4bb03de47cc034a05
These two patches are rebased onto the current kernel with
additional changes like removing 'fimd_win_commit' call from
the resume function since this is taken care by encoder
dpms, and the modification of resume flag in win_disable.
Signed-off-by: Prathyush K <prathyush.k@samsung.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Stephane Marchesin <marcheu@chromium.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
When mixer is turned off, we disable the clocks which will stop
the dma. Now if we remove the current framebuffer, we cannot
disable the overlay but the current framebuffer will still be freed.
When mixer resumes, the dma will continue from where it left off
and will throw a PAGE FAULT since the memory was freed.
This patch fixes the above problem by disabling the mixer windows
before disabling the mixer clocks. It also keeps track of which
windows were currently active by setting the 'resume' flag. When
mixer resumes, the window with a resume flag set is enabled again.
Now if a current fb is removed when mixer is off, mixer_win_disable
will set the 'resume' flag of that window to zero and return.
So when mixer resumes, that window will not be resumed.
Signed-off-by: Prathyush K <prathyush.k@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
It is more optimium to use wait queues while waiting for vsync so
that the current task is put to sleep. This way, the task wont
hog the CPU while waiting. We use wait_event_timeout and not
an interruptible function since we dont want the function to exit
when a signal is pending (e.g. drm release). This patch modifies
the wait for vblank function of fimd.
Signed-off-by: Prathyush K <prathyush.k@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
It is more optimium to use wait queues while waiting for vsync so
that the current task is put to sleep. This way, the task wont
hog the CPU while waiting. We use wait_event_timeout and not
an interruptible function since we dont want the function to exit
when a signal is pending (e.g. drm release). This patch modifies
the wait for vblank function of mixer.
Signed-off-by: Prathyush K <prathyush.k@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
The wait for vblank callback is moved from overlay_ops to
manager_ops for fimd.
Signed-off-by: Prathyush K <prathyush.k@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
The wait_for_vblank callback of hdmi and mixer is now moved from
overlay_ops to manager_ops.
Signed-off-by: Prathyush K <prathyush.k@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Changelog v2:
remove unnecessay wait_for_vblank call.
- with this patch, wait_for_vblank callback is moved from
overlay ops to manager ops so it should be removed and
it doesn't need to wait vblank signal at plane disable.
Changelog v1:
The wait_for_vblank callback is moved from overlay ops to manager ops
of exynos drm driver. Also, the check for DPMS OFF of encoder is
removed before calling wait_for_vblank.
Signed-off-by: Prathyush K <prathyush.k@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
With this patch, When dma_buf_unmap_attachment is called,
the pages of sgt aren't unmapped from iommu table.
Instead, when dma_buf_detach is called, that would be done.
And also removes exynos_get_sgt function used to get clone sgt
and uses attachment's sgt instead. This patch would resolve
performance deterioration issue when v4l2-based driver is using
the buffer imported from gem.
This change is derived from videobuf2-dma-contig.c
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
This patch moved the exynos-drm-hdmi platform device registration to the drm
driver. When DT is enabled, platform devices needs to be registered within the
driver code. This patch fits the requirement of both DT and Non DT based drm
drivers.
Signed-off-by: Rahul Sharma <rahul.sharma@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
This patch moved the exynos-drm platform device registration to the drm driver.
When DT is enabled, platform devices needs to be registered within the driver
code. This patch fits the requirement of both DT and Non DT based drm drivers.
Signed-off-by: Rahul Sharma <rahul.sharma@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
The dma ring can't write to register thus have to write to memory
its fence value. This ensure that it doesn't try to use scratch
register for dma ring fence driver.
Should fix:
https://bugs.freedesktop.org/show_bug.cgi?id=58166
Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
The bo creation placement is where the bo will be. Instead of trying
to move bo at each command stream let this work to another worker
thread that will use more advance heuristic.
agd5f: remove leftover unused variable
Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
The commit [23670b322: drm/i915: CPT+ pch transcoder workaround]
caused a regression on some HP laptops with IvyBridge. The whole
laptop screen is shifted downward for a few pixels constantly.
The problem appears only on LVDS while DP and VGA seem unaffected.
Also, the problem disappears once when go and back from S3.
(S4 resume still shows the same problem.)
This patch revives the minimum part the commit above dropped.
For fixing this regression, only the setup of CHICKEN2 bit in
cpt_init_clock_gating() is needed.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Alex writes:
"adds support for the
asynchronous DMA engines on r6xx-SI. These engines are used
for ttm bo moves and VM page table updates currently. They
could also be exposed via the CS ioctl for userspace use,
but I haven't had a chance to add proper CS checker patches
for them yet. These patches have been tested extensively
internally for months, so they should be pretty solid."
* 'drm-next-3.8' of git://people.freedesktop.org/~agd5f/linux:
drm/radeon: use DMA engine for VM page table updates on SI
drm/radeon: add dma engine support for vm pt updates on si (v2)
drm/radeon: use DMA engine for VM page table updates on cayman/TN
drm/radeon: add dma engine support for vm pt updates on ni (v5)
drm/radeon: use async dma for ttm buffer moves on 6xx-SI
drm/radeon/kms: add support for dma rings to radeon_test_moves()
drm/radeon/kms: Add initial support for async DMA on SI
drm/radeon/kms: Add initial support for async DMA on cayman/TN
drm/radeon/kms: Add initial support for async DMA on evergreen
drm/radeon/kms: Add initial support for async DMA on r6xx/r7xx
DMA engine has special packets to facilitate this and it also keeps
the 3D engine free for other things.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
DMA engine has special packets to facilitate this and it also keeps
the 3D engine free for other things.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Async DMA has a special packet for contiguous pt updates
which saves overhead.
v2: leave the CP method enabled for now as doing the updates
in the DMA rings is not working properly yet.
v3: update for 2 level pts
v4: rebase
v5: drop pte/pde packet. doesn't seem to work on NI.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
