When CONFIG_SND_CTL_VALIDATION is set, accesses to extended bytes
control generate spurious error messages when the size exceeds 512
bytes, such as
[ 11.224223] sof_sdw sof_sdw: control 2:0:0:EQIIR5.0 eqiir_coef_5:0:
invalid count 1024
In addition the error check returns -EINVAL which has the nasty side
effect of preventing applications accessing controls from working,
e.g.
root@plb:~# alsamixer
cannot load mixer controls: Invalid argument
It's agreed that the control interface has been abused since 2014, but
forcing a check should not prevent existing solutions from working.
This patch skips the checks conditionally if CONFIG_SND_CTL_VALIDATION
is set and the byte array provided by topology is > 512. This
preserves the checks for all other cases.
Fixes: 1a3232d2f6 ('ASoC: topology: Add support for TLV bytes controls')
BugLink: https://github.com/thesofproject/linux/issues/2430
Reported-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Jaska Uimonen <jaska.uimonen@intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200917103912.2565907-1-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
"alsactl -f state.conf store/restore" sequence fails because setting
"mixing clock source" and "output source" requires active TDM clock
being started for configuration propagation. Make these two controls
write only so that their values are not stored at "alsactl store".
Signed-off-by: Viorel Suman <viorel.suman@nxp.com>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Link: https://lore.kernel.org/r/1600104274-13110-1-git-send-email-viorel.suman@oss.nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
A USB device will always haev a bi-directional endpoint 0, that's just
how the devices work, so no need to check for that in a few quirk tests
as it will always pass.
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: Alexander Tsoy <alexander@tsoy.me>
Reported-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20200914153756.3412156-12-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The usb_control_msg_send() call can return an error if a "short" write
happens, so move the driver over to using that call instead.
Cc: Jaroslav Kysela <perex@perex.cz>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20200914153756.3412156-10-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The usb_control_msg_send() and usb_control_msg_recv() calls can return
an error if a "short" write/read happens, and they can handle data off
of the stack, so move the driver over to using those calls instead,
saving some logic when dynamically allocating memory.
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Vasily Khoruzhick <anarsoul@gmail.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20200914153756.3412156-9-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The usb_control_msg_send() and usb_control_msg_recv() calls can return
an error if a "short" write/read happens, so move the driver over to
using those calls instead, saving some logic in the wrapper functions
that were being used in this driver.
This also resolves a long-staging bug where data on the stack was being
sent in a USB control message, which was not allowed.
Cc: Jaroslav Kysela <perex@perex.cz>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20200914153756.3412156-8-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The usb_control_msg_send() call can handle data on the stack, as well as
returning an error if a "short" write happens, so move the driver over
to using that call instead. This ends up removing a helper function
that is no longer needed.
Cc: Jaroslav Kysela <perex@perex.cz>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20200914153756.3412156-7-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
snd_usb_pipe_sanity_check() is a great function, so let's move it into
the USB core so that other parts of the kernel, including the USB core,
can call it.
Name it usb_pipe_type_check() to match the existing
usb_urb_ep_type_check() call, which now uses this function.
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: "Gustavo A. R. Silva" <gustavoars@kernel.org>
Cc: Eli Billauer <eli.billauer@gmail.com>
Cc: Emiliano Ingrassia <ingrassia@epigenesys.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Alexander Tsoy <alexander@tsoy.me>
Cc: "Geoffrey D. Bennett" <g@b4.vu>
Cc: Jussi Laako <jussi@sonarnerd.net>
Cc: Nick Kossifidis <mickflemm@gmail.com>
Cc: Dmitry Panchenko <dmitry@d-systems.ee>
Cc: Chris Wulff <crwulff@gmail.com>
Cc: Jesus Ramos <jesus-ramos@live.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20200914153756.3412156-2-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Big cleanup for the Samsung S3C24xx and S3C64xx platforms, although it
also touches files shared with S5Pv210 and Exynos. This is mostly Arnd
Bergmann work which Krzysztof Kozlowski took over, rebased and polished.
The goal is to cleanup, merge and finally make the Samsung S3C24xx and
S3C64xx architectures multiplatform. The multiplatform did not happen
yet here - just cleaning up and merging into one arch/arm/mach-s3c
directory. However this is step forward for multiplatform or at least
to keep this code still maintainable.
This pulls also branch with changes for Samsung SoC sound drivers from
broonie/sound because the cleanups there were part of this series and
all further patches depend on them.
-----BEGIN PGP SIGNATURE-----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=bjMI
-----END PGP SIGNATURE-----
Merge tag 'samsung-soc-s3c-5.10' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/soc
Samsung S3C24xx and S3C64xx machine code cleanup for v5.10
Big cleanup for the Samsung S3C24xx and S3C64xx platforms, although it
also touches files shared with S5Pv210 and Exynos. This is mostly Arnd
Bergmann work which Krzysztof Kozlowski took over, rebased and polished.
The goal is to cleanup, merge and finally make the Samsung S3C24xx and
S3C64xx architectures multiplatform. The multiplatform did not happen
yet here - just cleaning up and merging into one arch/arm/mach-s3c
directory. However this is step forward for multiplatform or at least
to keep this code still maintainable.
This pulls also branch with changes for Samsung SoC sound drivers from
broonie/sound because the cleanups there were part of this series and
all further patches depend on them.
* tag 'samsung-soc-s3c-5.10' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: (62 commits)
ARM: s3c: Avoid naming clash of S3C24xx and S3C64xx timer setup
ARM: s3c: Cleanup from old plat-samsung include
ARM: s3c: make headers local if possible
ARM: s3c: move into a common directory
ARM: s3c24xx: stop including mach/hardware.h from mach/io.h
cpufreq: s3c24xx: move low-level clk reg access into platform code
cpufreq: s3c2412: use global s3c2412_cpufreq_setrefresh
ARM: s3c: remove cpufreq header dependencies
cpufreq: s3c24xx: split out registers
fbdev: s3c2410fb: remove mach header dependency
ARM: s3c24xx: bast: avoid irq_desc array usage
ARM: s3c24xx: spi: avoid hardcoding fiq number in driver
ARM: s3c24xx: include mach/irqs.h where needed
ARM: s3c24xx: move s3cmci pinctrl handling into board files
ARM: s3c24xx: move iis pinctrl config into boards
ARM: s3c24xx: move spi fiq handler into platform
ARM: s3c: adc: move header to linux/soc/samsung
ARM: s3c24xx: move irqchip driver back into platform
ARM: s3c24xx: move regs-spi.h into spi driver
ARM: s3c64xx: remove mach/hardware.h
...
Link: https://lore.kernel.org/r/20200831154751.7551-1-krzk@kernel.org
Signed-off-by: Olof Johansson <olof@lixom.net>
Most of this is various driver specific fixes, none of which are
terribly exciting in themselves, plus one core fix adding and using a
new DAI lookup function to deal with a lockdep warning.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAl9bX1gTHGJyb29uaWVA
a2VybmVsLm9yZwAKCRAk1otyXVSH0F04B/44DFfhh3KELcZkIiG4CLfoLRl1g3iw
EEjFHJRJkpVjKJmTGeVgUTYI6UOH4U9abMGey6s4uCZW2AEb5CGODiWlcKAfy7l2
i7XHbbJacsiJKU6ezR66azpuF+Hb5z/Z9AKfVuCDHHItXuj09A4H7V45AAd1IbEU
KWdPSAcex18OgEKhYZNxBkMapsTJQl04cDUWiel7PYT7nJYxLAz46JMI2y4IJ3S8
tXed+T1IDflruk819Mn1XAxYzvOVPcNRD6hHuSUEECV/BZcLJFEHPkvnLKEjKwNe
so66doBMcAGkuGoYlURh2otZWgoX56e7IYrqX5m2N1fIskSRkOeNl5J4
=WLI9
-----END PGP SIGNATURE-----
Merge tag 'asoc-fix-v5.9-rc4' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v5.9
Most of this is various driver specific fixes, none of which are
terribly exciting in themselves, plus one core fix adding and using a
new DAI lookup function to deal with a lockdep warning.
The tasklet is an old API that should be deprecated, usually can be
converted to another decent API. In FireWire driver, a tasklet is
still used for offloading the AMDTP PCM stream handling. It can be
achieved gracefully with a work queued, too.
This patch replaces the tasklet usage in firewire-lib driver with a
simple work. The conversion is fairly straightforward but for the
in_interrupt() checks that are replaced with the check using the
current_work().
Note that in_interrupt() in amdtp_packet tracepoint is still kept as
is. This is the place that is probed by both softirq of 1394 OHCI and
a user task of a PCM application, and the work handling is already
filtered in amdtp_domain_stream_pcm_pointer().
Tested-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Acked-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20200909163659.21708-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The series reuses mt8183-da7219-max98357.c for supporting machine
driver with rt1015p speaker amplifier.
The 1st patch adds document for the new proposed compatible string.
The 2nd patch changes the machine driver to support "RT1015P" codec.
Tzung-Bi Shih (2):
ASoC: dt-bindings: mt8183-da7219: add compatible string for using
rt1015p
ASoC: mediatek: mt8183-da7219: support machine driver with rt1015p
.../bindings/sound/mt8183-da7219-max98357.txt | 1 +
sound/soc/mediatek/Kconfig | 1 +
.../mediatek/mt8183/mt8183-da7219-max98357.c | 40 +++++++++++++++++++
3 files changed, 42 insertions(+)
--
2.28.0.526.ge36021eeef-goog
Hi,
Changes since v1:
- Suffix the 2359296000 constant with 'u' to silence C90 warning
When j7200 SOM is connected to the CPB, the audio setup is a bit different:
Only 48KHz family have clock path, 44.1KHz is not supported.
Update the binding documentation and add support for the j7200 version of CPB
to the driver.
Regards,
Peter
---
Peter Ujfalusi (2):
ASoC: dt-bindings: ti,j721e-cpb-audio: Document support for j7200-cpb
ASoC: ti: j721e-evm: Add support for j7200-cpb audio
.../bindings/sound/ti,j721e-cpb-audio.yaml | 92 ++++++++++++++-----
sound/soc/ti/j721e-evm.c | 11 +++
2 files changed, 81 insertions(+), 22 deletions(-)
--
Peter
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
Enable support of pm_runtime on STM32 SAI driver to allow
SAI power state monitoring.
pm_runtime_put_autosuspend() is called from ASoC framework
on pcm device close.
The pmdown_time delay is available in runtime context, and may be set
in SAI driver to take into account shutdown delay on playback.
However, this shutdown delay is already handled in the DAPMs
of the audio codec linked to SAI CPU DAI.
So, the choice is made, not to support this delay on CPU DAI side.
Signed-off-by: Olivier Moysan <olivier.moysan@st.com>
Link: https://lore.kernel.org/r/20200911081507.7276-1-olivier.moysan@st.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The variable bclk_rate is checked in:
if (bclk_rate && mclk_rate % bclk_rate)
This indicates that bclk_rate can be zero.
If so, a divide-by-zero bug will occur:
div_bclk = mclk_rate / bclk_rate;
To fix this possible bug, the function returns -EINVAL when bclk_rate is
zero.
Signed-off-by: Tuo Li <tuoli96@outlook.com>
Link: https://lore.kernel.org/r/TY2PR04MB4029799E60A5BCAAD5B7B5BBB8280@TY2PR04MB4029.apcprd04.prod.outlook.com
Signed-off-by: Mark Brown <broonie@kernel.org>
DMI product name is used to support system variants based out of
tgl_max98373_rt5682 in current implementation. Replace this DMI search with
DMI_OEM_STRING. Coreboot(BIOS used in these systems) is
setting the needed DMI_OEM_STRING field to uniquely identify these
systems.
Signed-off-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200910162705.2026036-1-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use inclusive language for DSP cores.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Jaska Uimonen <jaska.uimonen@intel.com>
Reviewed-by: Seppo Ingalsuo <seppo.ingalsuo@intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200910164125.2033062-5-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Remove the HDA_DSP_CORE_MASK() macro and use BIT() and GENMASK()
macros directly for more clarity.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Keyon Jie <yang.jie@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200910164125.2033062-4-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Modify the core_power_up/down ops for HDA platforms to restrict
the core_mask to the ones allowed by chip->cores_mask. This is needed
because on some HDA platforms not all cores can be powered up/down
by the host and this must be handled internally in the FW.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Keyon Jie <yang.jie@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200910164125.2033062-3-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Rename the cores_mask in struct sof_intel_dsp_desc to
host_managed_cores_mask to be more indicative of the fact that
only these cores can be powered up/down by the host.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Keyon Jie <yang.jie@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200910164125.2033062-2-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When j7200 SOM is attached to the CPB we only have parent clock for 48KHz
family and the rate of the parent clock is 2359296000Hz.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/20200910124110.19361-3-peter.ujfalusi@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Supports machine driver with rt1015p ("mt8183_da7219_rt1015p").
Embeds in the existing mt8183-da7219-max98357.c because they share
most of the code.
Signed-off-by: Tzung-Bi Shih <tzungbi@google.com>
Link: https://lore.kernel.org/r/20200911024833.1673961-3-tzungbi@google.com
Signed-off-by: Mark Brown <broonie@kernel.org>
LPASS IP on SoCs like SM8250 has Digital Codec part integrated into it.
This ports are exposed in Q6DSP as Codec ports. This patchset adds
support to those q6afe ports along with q6routing and q6afe-dai.
This patchset has been tested along with other patches on
Qualcomm Robotics RB5 Platform with Soundwire and WSA8815 Codec.
Thanks,
srini
Srinivas Kandagatla (8):
ASoC: q6dsp: q6afe: add support to Codec DMA ports
ASoC: q6dsp: q6routing: add support to Codec DMA ports
ASoC: q6dsp: q6afe: prepare afe_apr_send_pkt to take response opcode
ASoC: q6dsp: q6afe: add global q6afe waitqueue
ASoC: q6dsp: q6afe: add lpass hw voting support
ASoC: q6dsp: q6afe: update q6afe_set_param to support global clocks
ASoC: q6dsp: q6afe: add codec lpass clocks
ASoC: q6dsp: q6afe-dai: add support to Codec DMA ports
include/dt-bindings/sound/qcom,q6afe.h | 22 ++
sound/soc/qcom/qdsp6/q6afe-dai.c | 229 ++++++++++++++++++
sound/soc/qcom/qdsp6/q6afe.c | 308 +++++++++++++++++++++++--
sound/soc/qcom/qdsp6/q6afe.h | 33 ++-
sound/soc/qcom/qdsp6/q6routing.c | 121 +++++++++-
5 files changed, 689 insertions(+), 24 deletions(-)
--
2.21.0
LPASS now has integrated codec control whose clocks are controlled by Q6DSP.
This patch adds support to those clocks.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20200910101732.23484-8-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Previously there was no case where we need to set clock or send commands
that are not associated with q6afe ports, now we have cases like clock
voting and clock consumers like codecs that needed these clocks.
update q6afe_set_param() to support such cases, including token passing.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20200910101732.23484-7-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
In some cases like clocks q6afe would have to process commands
without an associated q6afe port, in such cases waitqueue is
required at global level to wait for the command to finish.
This patch also adds the command result to go with this waitqueue.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20200910101732.23484-5-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Update afe_apr_send_pkt() to take response opcode that it should wait for.
This is helpful in cases where we expect response other than the
actual command opcode.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20200910101732.23484-4-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
New LPASS supports various codec macros, DSP firmware already
has support to those ports. Add corresponding configuration
support to those ports in adsp drivers.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20200910101732.23484-2-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Adds rt1015p codec driver.
Rt1015p is a rt1015 variant.
- It doesn't support I2C.
- It only supports S24, 48kHz, 64FS.
Signed-off-by: Tzung-Bi Shih <tzungbi@google.com>
Link: https://lore.kernel.org/r/20200910042949.3795682-2-tzungbi@google.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The parity calculation is not reset on a Severe Reset, which leads to
misleading/harmless errors reported on startup. The addition of a
quirk helps filter out such errors while leaving the error checks on
in steady-state.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20200908134521.6781-6-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add a slave-level property and program the SCP_INT1_MASK as desired by
the codec driver. Since there is no DisCo property this has to be an
implementation-specific firmware property or hard-coded in the driver.
The only functionality change is that implementation-defined
interrupts are no longer set for amplifiers - those interrupts are
typically for jack detection or acoustic event detection/hotwording.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20200908134521.6781-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The miXart driver has been already converted to use the threaded IRQ
instead of tasklet while there is a remaining comment still mentioning
a tasklet. Update the comment appropriately.
Fixes: 8d3a8b5cb5 ("ALSA: mixart: Use nonatomic PCM ops")
Link: https://lore.kernel.org/r/20200903104131.21097-12-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The tasklet is an old API that should be deprecated, usually can be
converted to another decent API. In ASIHPI driver, a tasklet is
still used for offloading the PCM IRQ handling. It can be achieved
gracefully with a threaded IRQ, too.
This patch replaces the tasklet usage in asihpi driver with a threaded
IRQ. It also simplified some call patterns.
Link: https://lore.kernel.org/r/20200903104131.21097-10-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The tasklet is an old API that should be deprecated, usually can be
converted to another decent API. In Riptide driver, a tasklet is
still used for offloading the PCM IRQ handling. It can be achieved
gracefully with a threaded IRQ, too.
This patch replaces the tasklet usage in riptide driver with a
threaded IRQ.
Link: https://lore.kernel.org/r/20200903104131.21097-9-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The tasklet is an old API that should be deprecated, usually can be
converted to another decent API. In HDSP-MADI driver, a tasklet is
still used for offloading the MIDI I/O handling (optional via mixer
switch). It can be achieved gracefully with a work queued, too.
This patch replaces the tasklet usage in HDSP-MADI driver with a
simple work. The conversion is fairly straightforward. The only
significant difference is that the work initialization is moved to the
right place in snd_hdspm_create() and cancel_work_sync() is always
called in snd_hdspm_free() to assure killing the pending works.
Link: https://lore.kernel.org/r/20200903104131.21097-8-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The tasklet is an old API that should be deprecated, usually can be
converted to another decent API. In HDSP driver, a tasklet is still
used for offloading the MIDI I/O handling (optional via mixer
switch). It can be achieved gracefully with a work queued, too.
This patch replaces the tasklet usage in HDSP driver with a simple
work. The conversion is fairly straightforward. The only significant
difference is that a superfluous tasklet_kill() call is removed from
snd_hdap_midi_input_trigger().
Link: https://lore.kernel.org/r/20200903104131.21097-7-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The tasklet is an old API that should be deprecated, usually can be
converted to another decent API. In aloop driver, a tasklet is still
used for offloading the timer event task. It can be achieved
gracefully with a work queued, too.
This patch replaces the tasklet usage in aloop driver with a simple
work.
Link: https://lore.kernel.org/r/20200903104131.21097-6-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The tasklet is an old API that should be deprecated, usually can be
converted to another decent API. In UA101 driver, a tasklet is still
used for handling the output URBs. It can be achieved gracefully with
a work queued in the high-prio system workqueue, too.
This patch replaces the tasklet usage in UA101 driver with a simple
work.
Link: https://lore.kernel.org/r/20200903104131.21097-5-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The tasklet is an old API that should be deprecated, usually can be
converted to another decent API. In USB-audio driver, a tasklet is
still used in MIDI interface code for handling the output byte
stream. It can be achieved gracefully with a work queued in the
high-prio system workqueue.
This patch replaces the tasklet usage in USB-audio driver with a
simple work.
Link: https://lore.kernel.org/r/20200903104131.21097-4-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The tasklet is an old API that should be deprecated, usually can be
converted to another decent API. In ALSA core timer API, the
callbacks can be offlined to a tasklet when a flag is set in the timer
backend. It can be achieved gracefully with a work queued in the
high-prio system workqueue.
This patch replaces the usage of tasklet in ALSA timer API with a
simple work. Currently the tasklet feature is used only in the system
timer and hrtimer backends, so both are patched to use the new flag
name SNDRV_TIMER_HW_WORK, too.
Link: https://lore.kernel.org/r/20200903104131.21097-3-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The tasklet is an old API that should be deprecated, usually can be
converted to another decent API. This patch replaces the usage of
tasklet in pcsp driver with a simple work. In pcsp driver, a global
tasklet is used for offloading the period-elapse handling in the
hrtimer callback (introduced in commit 96c7d478ef "ALSA: pcsp - Fix
locking messes in snd-pcsp"). It can be achieved gracefully with a
work queued in the high-prio system workqueue.
This also changes tasklet_kill() with cancel_work_sync() in the
sync_stop callback, which is anyway better to assure canceling the
pending tasks.
Link: https://lore.kernel.org/r/20200903104131.21097-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Back-merge to apply the tasklet conversion patches that are based
on the already applied tasklet API changes on 5.9-rc4.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The new SPDIF TX controller is a serial port compliant with the IEC-
60958 standard. It also supports programmable User Data and Channel
Status fields.
This IP is embedded in Microchip's sama7g5 SoC.
Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Link: https://lore.kernel.org/r/20200909145348.367033-2-codrin.ciubotariu@microchip.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The tasklet is an old API that should be deprecated, usually can be
converted to another decent API. In ASoC TXx9 ACLC driver, a tasklet
is still used for offloading the hardware reset function. It can be
achieved gracefully with a work queued, too.
This patch replaces the tasklet usage in TXx9 ACLC driver with a
simple work. The conversion is fairly straightforward.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20200903104749.21435-4-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
The tasklet is an old API that should be deprecated, usually can be
converted to another decent API. In ASoC SH SIU driver, a tasklet is
still used for offloading the hardware reset function. It can be
achieved gracefully with a work queued, too.
This patch replaces the tasklet usage in SH SIU driver with a simple
work. The conversion is fairly straightforward.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20200903104749.21435-3-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
The tasklet is an old API that should be deprecated, usually can be
converted to another decent API. In ASoC FSL ESAI CPU DAI driver, a
tasklet is still used for offloading the hardware reset function.
It can be achieved gracefully with a work queued, too.
This patch replaces the tasklet usage in fsl esai driver with a simple
work. The conversion is fairly straightforward.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20200903104749.21435-2-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
The Mic connects to the Nid 0x19, but the configuration of Nid 0x19
is not defined to Mic, and also need to set the coeff to enable the
auto detection on the Nid 0x19. After this change, the Mic plugging
in or plugging out could be detected and could record the sound from
the Mic.
And the coeff value is suggested by Kailang of Realtek.
Cc: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Link: https://lore.kernel.org/r/20200909020041.8967-1-hui.wang@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
According to its datasheet, after reset this codec goes into sleep
mode. In this mode, any register accessing should be avoided except for
exiting sleep mode. Hence this commit moves SLEEP_CFG access before any
register accessing.
Signed-off-by: Camel Guo <camelg@axis.com>
Acked-by: Dan Murphy <dmurphy@ti.com>
Link: https://lore.kernel.org/r/20200908083521.14105-2-camel.guo@axis.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In some cases we need to probe additional audio components that do
not appear as part of the DAI links specified in the device tree.
Examples for this are auxiliary devices such as analog amplifiers
or codecs.
The ASoC core provides a way to probe these components by adding
them to snd_soc_card->aux_dev.
This patch set allows specifying them in the device tree through
a new "aux-devs" property.
v1: https://lore.kernel.org/linux-arm-msm/20200819091533.2334-1-stephan@gerhold.net/
Changes in v2:
- Fix value type in device tree bindings:
aux-devs should be array of phandles without any arguments, so change
<phandles with arguments> -> <array of phandles>
Stephan Gerhold (2):
ASoC: dt-bindings: qcom: Document "aux-devs" property
ASoC: qcom: common: Parse auxiliary devices from device tree
.../devicetree/bindings/sound/qcom,apq8016-sbc.txt | 7 +++++++
Documentation/devicetree/bindings/sound/qcom,apq8096.txt | 8 ++++++++
Documentation/devicetree/bindings/sound/qcom,sdm845.txt | 8 ++++++++
sound/soc/qcom/common.c | 4 ++++
4 files changed, 27 insertions(+)
--
2.28.0
if of_find_device_by_node() succeed, imx_es8328_probe() doesn't have
a corresponding put_device(). Thus add a jump target to fix the exception
handling for this function implementation.
Fixes: 7e7292dba2 ("ASoC: fsl: add imx-es8328 machine driver")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20200825130224.1488694-1-yukuai3@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In some cases we need to probe additional audio components that do
not appear as part of the DAI links specified in the device tree.
Examples for this are auxiliary devices such as analog amplifiers
or codecs.
The ASoC core provides a way to probe these components by adding
them to snd_soc_card->aux_dev. We can use the snd_soc_of_parse_aux_devs()
function to parse them from the device tree.
As an example for this, some MSM8916 smartphones have an analog
speaker amplifier connected to the HPHR output. With the new property
this can be modelled as follows:
speaker-amp: audio-amplifier {
compatible = "simple-audio-amplifier";
enable-gpios = <&msmgpio 114 GPIO_ACTIVE_HIGH>;
sound-name-prefix = "Speaker Amp";
};
&sound {
aux-devs = <&speaker_amp>;
audio-routing = "Speaker Amp IN", "HPHR";
};
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20200826095141.94017-3-stephan@gerhold.net
Signed-off-by: Mark Brown <broonie@kernel.org>
Mt6359 platform device is instantiated by mfd_add_devices(). In the
case, dev->of_node is NULL so that mt6359_parse_dt() always fails to
parse the desired DT properties.
Gets the DT properties via dev->parent->of_node.
Fixes: 8061734ab6 ("ASoC: mediatek: mt6359: add codec driver")
Signed-off-by: Tzung-Bi Shih <tzungbi@google.com>
Link: https://lore.kernel.org/r/20200908070044.1142644-1-tzungbi@google.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch implements the snd_sof_bytes_ext_volatile_get() to read the
actual parameters from DSP by sending the SOF_IPC_COMP_GET_DATA IPC
for the kcontrol of type SOF_TPLG_KCTL_BYTES_VOLATILE_RO.
Signed-off-by: Dharageswari R <dharageswari.r@intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200908092825.1813847-2-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds support for write-only and read-only TLV byte kcontrols
by checking for appropriate get/put IO handlers.
Signed-off-by: Dharageswari R <dharageswari.r@intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200908092825.1813847-1-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The initial machine driver supports only j721e-cpb and the ivi addon, but
other EVMs for different K3 SoC can have similar audio setup which can
be supported by the driver with small or no modification.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/20200908113204.12012-1-peter.ujfalusi@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Now that the fixes series is merged, here is a series of small cleanups
to the sun8i-codec driver. These help shorten the patch stack for the
next series, which will add support for the other two DAIs in this
codec: AIF2 and AIF3.
Samuel Holland (9):
ASoC: sun8i-codec: Remove extraneous widgets
ASoC: sun8i-codec: Fix AIF1 MODCLK widget name
ASoC: sun8i-codec: Fix AIF1_ADCDAT_CTRL field names
ASoC: sun8i-codec: Fix AIF1_MXR_SRC field names
ASoC: sun8i-codec: Fix ADC_DIG_CTRL field name
ASoC: sun8i-codec: Fix field bit number indentation
ASoC: sun8i-codec: Sort masks in a consistent order
ASoC: sun8i-codec: Attach the bus clock to the regmap
ASoC: sun8i-codec: Manage module clock via DAPM
sound/soc/sunxi/sun8i-codec.c | 104 ++++++++++++----------------------
1 file changed, 37 insertions(+), 67 deletions(-)
--
2.26.2
This series adds support for UUID based component identification
in SOF. UUIDs provide a more scalable alternative to the old
component type based approach to identify which DSP components
should be loaded.
More detailed description of UUID usage in SOF is available in:
https://thesofproject.github.io/latest/developer_guides/uuid/
UUID support is an incremental update to the SOF IPC interface. Driver
remains compatible with pre-UUID (ABI <3.17) firmware versions.
Keyon Jie (16):
ASoC: SOF: tokens: add token for component UUID
ASoC: SOF: add comp_ext to struct snd_sof_widget
ASoC: SOF: topology: create component extended tokens
ASoC: SOF: topology: parse comp_ext_tokens for all widgets
ASoC: SOF: use the sof_ipc_comp reserved bytes for extended data
ASoC: SOF: topology: add helper for setting up IPC component
ASoC: SOF: append extended data to sof_ipc_comp_dai
ASoC: SOF: append extended data to sof_ipc_comp_mixer
ASoC: SOF: append extended data to sof_ipc_comp_volume
ASoC: SOF: append extended data to sof_ipc_comp_host
ASoC: SOF: append extended data to sof_ipc_comp_src
ASoC: SOF: append extended data to sof_ipc_comp_asrc
ASoC: SOF: append extended data to sof_ipc_comp_tone
ASoC: SOF: append extended data to sof_ipc_comp_process
ASoC: SOF: append extended data to sof_ipc_comp_mux
ASoC: SOF: topology: make process type optional
include/sound/sof/topology.h | 12 +-
include/uapi/sound/sof/tokens.h | 1 +
sound/soc/sof/sof-audio.c | 23 +++-
sound/soc/sof/sof-audio.h | 3 +
sound/soc/sof/topology.c | 208 ++++++++++++++++++++------------
5 files changed, 161 insertions(+), 86 deletions(-)
--
2.27.0
To set platform in slave mode setting the MASTER_MODE bit is not needed.
Removing !MASTER_MODE conditional to avoid potential errors and warning.
Signed-off-by: Michael Sit Wei Hong <michael.wei.hong.sit@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200904020904.19577-1-michael.wei.hong.sit@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
As components can be now identified with a UUID based mechanism, the
process type is no longer required. For new DSP components, process and
its component type can be set to SOF_PROCESS_NONE and SOF_COMP_NONE.
Allow this combination in topology load, modify the load time check for
process type to reflect this.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Curtis Malainey <curtis@malainey.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200904132744.1699575-17-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Append the extended data to the end of the struct sof_ipc_comp_mux,
construct the ipc for COMP_NEW during the topology load stage.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200904132744.1699575-16-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Append the extended data to the end of the struct sof_ipc_comp_process,
construct the ipc for COMP_NEW during the topology load stage.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200904132744.1699575-15-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Append the extended data to the end of the struct sof_ipc_comp_tone,
construct the ipc for COMP_NEW during the topology load stage.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200904132744.1699575-14-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Append the extended data to the end of the struct sof_ipc_comp_asrc,
construct the ipc for COMP_NEW during the topology load stage.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200904132744.1699575-13-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Append the extended data to the end of the struct sof_ipc_comp_src,
construct the ipc for COMP_NEW during the topology load stage.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200904132744.1699575-12-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Append the extended data to the end of the struct sof_ipc_comp_host,
construct the ipc for COMP_NEW during the topology load stage.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200904132744.1699575-11-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Append the extended data to the end of the struct sof_ipc_comp_volume,
construct the ipc for COMP_NEW during the topology load stage.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200904132744.1699575-10-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Append the extended data to the end of the struct sof_ipc_comp_mixer,
construct the ipc for COMP_NEW during the topology load stage.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200904132744.1699575-9-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Append the extended data to the end of the struct sof_ipc_comp_dai, and
update the ext_data_offset, to construct the IPC for the topology load
and runtime restore.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200904132744.1699575-8-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add helper to allocate buffer for IPC component, configure the basic
settings, and set up the extended data for the subsequent IPC sending.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200904132744.1699575-7-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Parse comp_ext_tokens in the common sof_widget_ready(), and the
swidget->comp_ext will be used to construct the COMP_NEW ipc in the
subsequent commits.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200904132744.1699575-5-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add comp_ext_tokens which will be used to parse all extended tokens,
these tokens will be stored it to struct snd_sof_widget.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200904132744.1699575-4-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add member comp_ext to struct snd_sof_widget, which will be used for
topology extended tokens parsing.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200904132744.1699575-3-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
By representing the module clock as a DAPM widget, we ensure that the
clock is only enabled when the module is actually in use, without
additional code in runtime PM hooks.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20200831034852.18841-10-samuel@sholland.org
Signed-off-by: Mark Brown <broonie@kernel.org>
When attached to the regmap, the bus clock is automatically enabled as
needed to access device registers. This avoids needing code to manage it
separately in the driver.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20200831034852.18841-9-samuel@sholland.org
Signed-off-by: Mark Brown <broonie@kernel.org>
All other definitions are sorted from largest to smallest bit number.
This makes the AIF1CLK_CTRL mask constants consistent with them.
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Link: https://lore.kernel.org/r/20200831034852.18841-8-samuel@sholland.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Several fields have inconsistent indentation, presumably because the
patch "looked correct" due to the additional "+" character at the
beginning of the line.
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Link: https://lore.kernel.org/r/20200831034852.18841-7-samuel@sholland.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Even though they are for the left channel mixer, they are documented as
"MXR_SRC". This matches the naming scheme used for the main DAC. The "R"
is part of the abbreviation for "mixer", not a reference to the channel.
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Link: https://lore.kernel.org/r/20200831034852.18841-5-samuel@sholland.org
Signed-off-by: Mark Brown <broonie@kernel.org>
This driver is for the digital part of the codec only. The analog part,
including the microphone inputs, is managed by a separate driver. These
widgets look like they were copied from sun4i-codec. Since they do not
perform any function in this driver, remove them.
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Link: https://lore.kernel.org/r/20200831034852.18841-2-samuel@sholland.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Add .prepare and .hw_free callback to dailink.
The companion patch for this patch is the removal of stream operations
in the .prepare and .hw_free callbacks at the DAI level in
drivers/soundwire/intel.c
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20200904182854.3944-4-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add trigger functionality to dailink, so far only .startup() and
.shutdown() were implemented at the machine driver level.
The companion patch for this patch is the removal of the trigger
callback at the DAI level in drivers/soundwire/intel.c
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20200904182854.3944-3-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Introduce for_each_rtd_dais_rollback macro which behaves exactly like
for_each_codec_dais_rollback and its cpu_dais equivalent but for all
dais instead.
Use newly added macro to fix soc_pcm_open error path and prevent
uninitialized dais from being cleaned-up.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Fixes: 5d9fa03e6c ("ASoC: soc-pcm: tidyup soc_pcm_open() order")
Acked-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/20200907111939.16169-1-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
A collection of small changes, nothing intrusive:
* Remaining tasklet API conversions, now all sound stuff have been
converted
* A few HD-audio and USB-audio quirks and minor fixes
* FireWire Tascam and Digi00xx fixes
* Drop of kernel WARNING from PCM OSS for syzkaller
-----BEGIN PGP SIGNATURE-----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=CwOB
-----END PGP SIGNATURE-----
Merge tag 'sound-5.9-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of small changes, nothing intrusive:
- remaining tasklet API conversions, now all sound stuff have been
converted
- a few HD-audio and USB-audio quirks and minor fixes
- FireWire Tascam and Digi00xx fixes
- drop a kernel WARNING from PCM OSS for syzkaller"
* tag 'sound-5.9-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (29 commits)
ALSA: hda/realtek - Improved routing for Thinkpad X1 7th/8th Gen
ALSA: hda: use consistent HDAudio spelling in comments/docs
ALSA: hda: add dev_dbg log when driver is not selected
ALSA: hda: fix a runtime pm issue in SOF when integrated GPU is disabled
ALSA: hda: hdmi - add Rocketlake support
ALSA: ua101: convert tasklets to use new tasklet_setup() API
ALSA: usb-audio: convert tasklets to use new tasklet_setup() API
ASoC: txx9: convert tasklets to use new tasklet_setup() API
ASoC: siu: convert tasklets to use new tasklet_setup() API
ASoC: fsl_esai: convert tasklets to use new tasklet_setup() API
ALSA: hdsp: convert tasklets to use new tasklet_setup() API
ALSA: riptide: convert tasklets to use new tasklet_setup() API
ALSA: pci/asihpi: convert tasklets to use new tasklet_setup() API
ALSA: firewire: convert tasklets to use new tasklet_setup() API
ALSA: core: convert tasklets to use new tasklet_setup() API
ALSA: pcm: oss: Remove superfluous WARN_ON() for mulaw sanity check
ALSA: hda - Fix silent audio output and corrupted input on MSI X570-A PRO
ALSA: hda/hdmi: always check pin power status in i915 pin fixup
ALSA: hda/realtek: Add quirk for Samsung Galaxy Book Ion NT950XCJ-X716A
ALSA: usb-audio: Add basic capture support for Pioneer DJ DJM-250MK2
...
Core power up involves 2 steps: The first step tries to
power up the core by setting the ADSPCS.SPA bit for the host-managed
cores. The second step involves sending the IPC to power up other
cores that are not host managed. The enabled_cores_mask should
be updated only when both these steps are successful. If the
IPC to the DSP fails, the host-managed core that was powered in
step 1 should be powered off before returning the error.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Keyon Jie <yang.jie@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200902140756.1427005-4-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently SOF supports running pipelines on secondary DSP cores in a
limited way. This patch represents the next step in SOF multi-core DSP
support, it adds checks for core ID to individual topology components.
It takes care to power up all the requested cores. More advanced DSP
core power management should be added in the future.
Signed-off-by: Pan Xiuli <xiuli.pan@linux.intel.com>
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200902140756.1427005-3-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We want to be able to explicitly assign cores to individual pipeline
components. This patch adds a "core" parameter to widget loading
functions to be sent to the DSP for appropriate component scheduling.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200902140756.1427005-2-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Transmit data pins will output zero when slots are masked or channels
are disabled. In CHMOD TDM mode, transmit data pins are tri-stated when
slots are masked or channels are disabled. When data pins are tri-stated,
there is noise on some channels when FS clock value is high and data is
read while fsclk is transitioning from high to low.
Signed-off-by: Cosmin-Gabriel Samoila <cosmin.samoila@nxp.com>
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Link: https://lore.kernel.org/r/1599112427-22038-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
One data channel is one data line. From imx7ulp, the SAI IP is
enhanced to support multiple data channels.
If there is only two channels input and slots is 2, then enable one
data channel is enough for data transfer. So enable the TCE/RCE and
transmit/receive mask register according to the input channels and
slots configuration.
Move the data channel enablement from startup() to hw_params().
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Link: https://lore.kernel.org/r/1598958068-10552-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There've been quite a few regression reports about the lowered volume
(reduced to ca 65% from the previous level) on Lenovo Thinkpad X1
after the commit d2cd795c4e ("ALSA: hda - fixup for the bass speaker
on Lenovo Carbon X1 7th gen"). Although the commit itself does the
right thing from HD-audio POV in order to have a volume control for
bass speakers, it seems that the machine has some secret recipe under
the hood.
Through experiments, Benjamin Poirier found out that the following
routing gives the best result:
* DAC1 (NID 0x02) -> Speaker pin (NID 0x14)
* DAC2 (NID 0x03) -> Shared by both Bass Speaker pin (NID 0x17) &
Headphone pin (0x21)
* DAC3 (NID 0x06) -> Unused
DAC1 seems to have some equalizer internally applied, and you'd get
again the output in a bad quality if you connect this to the
headphone pin. Hence the headphone is connected to DAC2, which is now
shared with the bass speaker pin. DAC3 has no volume amp, hence it's
not connected at all.
For achieving the routing above, this patch introduced a couple of
workarounds:
* The connection list of bass speaker pin (NID 0x17) is reduced not to
include DAC3 (NID 0x06)
* Pass preferred_pairs array to specify the fixed connection
Here, both workarounds are needed because the generic parser prefers
the individual DAC assignment over others.
When the routing above is applied, the generic parser creates the two
volume controls "Front" and "Bass Speaker". Since we have only two
DACs for three output pins, those are not fully controlling each
output individually, and it would confuse PulseAudio. For avoiding
the pitfall, in this patch, we rename those volume controls to some
unique ones ("DAC1" and "DAC2"). Then PulseAudio ignore them and
concentrate only on the still good-working "Master" volume control.
If a user still wants to control each DAC volume, they can still
change manually via "DAC1" and "DAC2" volume controls.
Fixes: d2cd795c4e ("ALSA: hda - fixup for the bass speaker on Lenovo Carbon X1 7th gen")
Reported-by: Benjamin Poirier <benjamin.poirier@gmail.com>
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Tested-by: Benjamin Poirier <benjamin.poirier@gmail.com>
Cc: <stable@vger.kernel.org>
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=207407#c10
BugLink: https://gist.github.com/hamidzr/dd81e429dc86f4327ded7a2030e7d7d9#gistcomment-3214171
BugLink: https://gist.github.com/hamidzr/dd81e429dc86f4327ded7a2030e7d7d9#gistcomment-3276276
Link: https://lore/kernel.org/r/20200829112746.3118-1-benjamin.poirier@gmail.com
Link: https://lore.kernel.org/r/20200903083300.6333-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
port_ready will be changed to a fixed array in sdw.h and all initialization
work will be done at soundwire side in the following patch. So remove them
from codec drivers.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20200831134318.11443-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Fix cppcheck warning:
sound/drivers/vx/vx_pcm.c:539:30: style: Variable
'chip->playback_pipes[audio]' is reassigned a value before the old one
has been used. [redundantAssignment]
chip->playback_pipes[audio] = pipe;
^
sound/drivers/vx/vx_pcm.c:533:31: note: chip->playback_pipes[audio] is
assigned
chip->playback_pipes[audio] = pipe;
^
sound/drivers/vx/vx_pcm.c:539:30: note: chip->playback_pipes[audio] is
overwritten
chip->playback_pipes[audio] = pipe;
^
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200902212133.30964-18-pierre-louis.bossart@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Fix cppcheck warning:
sound/pci/hda/hda_auto_parser.c:353:7: style: Local variable 'i'
shadows outer variable [shadowVariable]
int i = 0;
^
sound/pci/hda/hda_auto_parser.c:182:6: note: Shadowed declaration
int i;
^
sound/pci/hda/hda_auto_parser.c:353:7: note: Shadow variable
int i = 0;
^
It's not clear why a new declaration was added, remove and reuse
variable declared with larger scope.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200902212133.30964-11-pierre-louis.bossart@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Fix cppcheck warning:
sound/core/compress_offload.c:1044:6: style: Redundant initialization
for 'ret'. The initialized value is overwritten before it is
read. [redundantInitialization]
ret = snd_register_device(SNDRV_DEVICE_TYPE_COMPRESS,
^
sound/core/compress_offload.c:1034:10: note: ret is initialized
int ret = -EINVAL;
^
sound/core/compress_offload.c:1044:6: note: ret is overwritten
ret = snd_register_device(SNDRV_DEVICE_TYPE_COMPRESS,
^
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Acked-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20200902212133.30964-8-pierre-louis.bossart@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Fix cppcheck warning and only dereference once the initial checks are
done:
sound/core/compress_offload.c:516:38: warning: Either the condition
'!stream' is redundant or there is possible null pointer dereference:
stream. [nullPointerRedundantCheck]
struct snd_compr_runtime *runtime = stream->runtime;
^
sound/core/compress_offload.c:518:17: note: Assuming that condition
'!stream' is not redundant
if (snd_BUG_ON(!(stream) || !(stream)->runtime))
^
sound/core/compress_offload.c:516:38: note: Null pointer dereference
struct snd_compr_runtime *runtime = stream->runtime;
^
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Acked-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20200902212133.30964-7-pierre-louis.bossart@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Cppcheck complains about a possible NULL pointer dereference but it
actually looks like the NULL assignment is not needed (same loop is
used in other parts of the file without it).
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200902212133.30964-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Fix cppcheck warnings:
sound/core/pcm_memory.c:380:26: warning: Either the condition
'!substream' is redundant or there is possible null pointer
dereference: substream. [nullPointerRedundantCheck]
struct snd_card *card = substream->pcm->card;
^
sound/core/pcm_memory.c:384:6: note: Assuming that condition
'!substream' is not redundant
if (PCM_RUNTIME_CHECK(substream))
^
sound/core/pcm_memory.c:380:26: note: Null pointer dereference
struct snd_card *card = substream->pcm->card;
^
sound/core/pcm_memory.c:433:26: warning: Either the condition
'!substream' is redundant or there is possible null pointer
dereference: substream. [nullPointerRedundantCheck]
struct snd_card *card = substream->pcm->card;
^
sound/core/pcm_memory.c:436:6: note: Assuming that condition
'!substream' is not redundant
if (PCM_RUNTIME_CHECK(substream))
^
sound/core/pcm_memory.c:433:26: note: Null pointer dereference
struct snd_card *card = substream->pcm->card;
^
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200902212133.30964-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Fix cppcheck, the fallthrough only makes sense within the conditional
block
sound/core/memalloc.c:161:3: style:inconclusive: Statements following
return, break, continue, goto or throw will never be
executed. [unreachableCode]
fallthrough;
^
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200902212133.30964-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Fix sparse warning:
sound/core/pcm.c:999:9: warning: context imbalance in
'snd_pcm_detach_substream' - different lock contexts for basic block
There's no real reason to test the same thing twice, and it's simpler
have linear sequences.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200902212133.30964-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The MPMAN Converter9 2-in-1 almost fully works with out default settings.
The only problem is that it has only 1 speaker so any sounds only playing
on the right channel get lost.
Add a quirk for this model using the default settings + MONO_SPEAKER.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200901080623.4987-1-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We use HDaudio and HDAudio, pick one to make searches easier.
No functionality change
Also fix timestamping typo in documentation.
Reported-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200902154250.1440585-1-kai.vehmanen@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
On SKL+ Intel platforms, the driver selection is handled by the
snd_intel_dspcfg, and when the HDaudio legacy driver is not selected,
be it with the auto-selection or user preferences with a kernel
parameter, the probe aborts with no logs, only a -ENODEV return value.
Having no dmesg trace, even with dynamic debug enabled, makes support
more complicated than it needs to be, and even experienced users can
be fooled. A simple dev_dbg() trace solves this problem.
BugLink: https://github.com/thesofproject/linux/issues/2330
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200902154239.1440537-1-kai.vehmanen@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In snd_hdac_device_init pm_runtime_set_active is called to
increase child_count in parent device. But when it is failed
to build connection with GPU for one case that integrated
graphic gpu is disabled, snd_hdac_ext_bus_device_exit will be
invoked to clean up a HD-audio extended codec base device. At
this time the child_count of parent is not decreased, which
makes parent device can't get suspended.
This patch calls pm_runtime_set_suspended to decrease child_count
in parent device in snd_hdac_device_exit to match with
snd_hdac_device_init. pm_runtime_set_suspended can make sure that
it will not decrease child_count if the device is already suspended.
Signed-off-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200902154218.1440441-1-kai.vehmanen@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In preparation for unconditionally passing the
struct tasklet_struct pointer to all tasklet
callbacks, switch to using the new tasklet_setup()
and from_tasklet() to pass the tasklet pointer explicitly.
Signed-off-by: Romain Perier <romain.perier@gmail.com>
Signed-off-by: Allen Pais <allen.lkml@gmail.com>
Link: https://lore.kernel.org/r/20200902040221.354941-11-allen.lkml@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In preparation for unconditionally passing the
struct tasklet_struct pointer to all tasklet
callbacks, switch to using the new tasklet_setup()
and from_tasklet() to pass the tasklet pointer explicitly.
Signed-off-by: Romain Perier <romain.perier@gmail.com>
Signed-off-by: Allen Pais <allen.lkml@gmail.com>
Link: https://lore.kernel.org/r/20200902040221.354941-10-allen.lkml@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In preparation for unconditionally passing the
struct tasklet_struct pointer to all tasklet
callbacks, switch to using the new tasklet_setup()
and from_tasklet() to pass the tasklet pointer explicitly.
Signed-off-by: Romain Perier <romain.perier@gmail.com>
Signed-off-by: Allen Pais <allen.lkml@gmail.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20200902040221.354941-9-allen.lkml@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In preparation for unconditionally passing the
struct tasklet_struct pointer to all tasklet
callbacks, switch to using the new tasklet_setup()
and from_tasklet() to pass the tasklet pointer explicitly.
Signed-off-by: Romain Perier <romain.perier@gmail.com>
Signed-off-by: Allen Pais <allen.lkml@gmail.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20200902040221.354941-8-allen.lkml@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In preparation for unconditionally passing the
struct tasklet_struct pointer to all tasklet
callbacks, switch to using the new tasklet_setup()
and from_tasklet() to pass the tasklet pointer explicitly.
Signed-off-by: Romain Perier <romain.perier@gmail.com>
Signed-off-by: Allen Pais <allen.lkml@gmail.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20200902040221.354941-7-allen.lkml@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In preparation for unconditionally passing the
struct tasklet_struct pointer to all tasklet
callbacks, switch to using the new tasklet_setup()
and from_tasklet() to pass the tasklet pointer explicitly.
Signed-off-by: Romain Perier <romain.perier@gmail.com>
Signed-off-by: Allen Pais <allen.lkml@gmail.com>
Link: https://lore.kernel.org/r/20200902040221.354941-6-allen.lkml@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In preparation for unconditionally passing the
struct tasklet_struct pointer to all tasklet
callbacks, switch to using the new tasklet_setup()
and from_tasklet() to pass the tasklet pointer explicitly.
Signed-off-by: Romain Perier <romain.perier@gmail.com>
Signed-off-by: Allen Pais <allen.lkml@gmail.com>
Link: https://lore.kernel.org/r/20200902040221.354941-5-allen.lkml@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In preparation for unconditionally passing the
struct tasklet_struct pointer to all tasklet
callbacks, switch to using the new tasklet_setup()
and from_tasklet() to pass the tasklet pointer explicitly.
Signed-off-by: Romain Perier <romain.perier@gmail.com>
Signed-off-by: Allen Pais <allen.lkml@gmail.com>
Link: https://lore.kernel.org/r/20200902040221.354941-4-allen.lkml@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In preparation for unconditionally passing the
struct tasklet_struct pointer to all tasklet
callbacks, switch to using the new tasklet_setup()
and from_tasklet() to pass the tasklet pointer explicitly.
Signed-off-by: Romain Perier <romain.perier@gmail.com>
Signed-off-by: Allen Pais <allen.lkml@gmail.com>
Acked-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20200902040221.354941-3-allen.lkml@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In preparation for unconditionally passing the
struct tasklet_struct pointer to all tasklet
callbacks, switch to using the new tasklet_setup()
and from_tasklet() to pass the tasklet pointer explicitly.
Signed-off-by: Romain Perier <romain.perier@gmail.com>
Signed-off-by: Allen Pais <allen.lkml@gmail.com>
Link: https://lore.kernel.org/r/20200902040221.354941-2-allen.lkml@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
While addressing existing power-cycle limitations for
sound/soc/intel/haswell solution, change brings regression for standard
audio userspace flows e.g.: when using PulseAudio.
Occasional sound-card initialization fail is still better than
permanent audio distortions, so revert the change.
Fixes: 8ec7d60432 ("ASoC: Intel: haswell: Power transition refactor")
Reported-by: Christian Bundy <christianbundy@fraction.io>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200901153041.14771-1-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In adcx140_i2c_probe, adcx140->dev is accessed before its
initialization. This commit fixes this bug.
Fixes: 689c7655b5 ("ASoC: tlv320adcx140: Add the tlv320adcx140 codec driver family")
Acked-by: Dan Murphy <dmurphy@ti.com>
Signed-off-by: Camel Guo <camel.guo@axis.com>
Link: https://lore.kernel.org/r/20200901135736.32036-1-camel.guo@axis.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The PCM OSS mulaw plugin has a check of the format of the counter part
whether it's a linear format. The check is with snd_BUG_ON() that
emits WARN_ON() when the debug config is set, and it confuses
syzkaller as if it were a serious issue. Let's drop snd_BUG_ON() for
avoiding that.
While we're at it, correct the error code to a more suitable, EINVAL.
Reported-by: syzbot+23b22dc2e0b81cbfcc95@syzkaller.appspotmail.com
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200901131802.18157-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The probe of rt5682 is pretty slow. A quick measurement shows that it
takes ~650 ms on at least one board. There's no reason to block all
other drivers waiting for this probe to finish. Set the flag to allow
other drivers to probe while we're probing.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20200828162005.1.I4f67f494c4f759b0e5c7f487e040dfdcf16e0876@changeid
Signed-off-by: Mark Brown <broonie@kernel.org>
When the wm8958_mic_detect, wm8994_mic_detect functions get called from
the machine driver, e.g. from the card's late_probe() callback, the CODEC
device may be PM runtime suspended and any regmap writes have no effect.
Add PM runtime calls to these functions to ensure the device registers
are updated as expected.
This suppresses an error during boot
"wm8994-codec: ASoC: error at snd_soc_component_update_bits on wm8994-codec"
caused by the regmap access error due to the cache_only flag being set.
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20200827173357.31891-2-s.nawrocki@samsung.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The WM8994_MICBIAS register is not available in the WM1811 CODEC so skip
initialization of that register for that device.
This suppresses an error during boot:
"wm8994-codec: ASoC: error at snd_soc_component_update_bits on wm8994-codec"
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20200827173357.31891-1-s.nawrocki@samsung.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Following Christian Lachner's patch for Gigabyte X570-based motherboards,
also patch the MSI X570-A PRO motherboard; the ALC1220 codec requires the
same workaround for Clevo laptops to enforce the DAC/mixer connection
path. Set up a quirk entry for that.
I suspect most if all X570 motherboards will require similar patches.
[ The entries reordered in the SSID order -- tiwai ]
Related buglink: https://bugzilla.kernel.org/show_bug.cgi?id=205275
Signed-off-by: Dan Crawford <dnlcrwfrd@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200829024946.5691-1-dnlcrwfrd@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
On g12 and following platforms, The first channel of record with more than
2 channels ends being placed randomly on an even channel of the output.
On these SoCs, a bit was added to force the first channel to be placed at
the beginning of the output. Apparently the behavior if the bit is not set
is not easily predictable. According to the documentation, this bit is not
present on the axg series.
Set the bit on g12 and fix the problem.
Fixes: a3c23a8ad4 ("ASoC: meson: axg-toddr: add g12a support")
Reported-by: Nicolas Belin <nbelin@baylibre.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20200828151438.350974-1-jbrunet@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add the audio routing map to enable the digital mic paths when the
analog mic paths are not enabled.
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Link: https://lore.kernel.org/r/20200828112855.10112-1-dmurphy@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Current fmt_single_name code limits maximum name of a DAI or component
to 32 bytes. On some systems corresponding device names might be longer
than that (e.g.
17300000.remoteproc:glink-edge:apr:apr-service@8:routing). This will
result in duplicate DAI/component names. Rewrite fmt_single_name() to
remove such length limitations.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20200827205100.1479331-1-dmitry.baryshkov@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
commit 25612477d2 ("ASoC: soc-dai: set dai_link dpcm_ flags with a helper")
added snd_soc_dai_link_set_capabilities().
But it is using snd_soc_find_dai() (A) which is required client_mutex (B).
And client_mutex is soc-core.c local.
struct snd_soc_dai *snd_soc_find_dai(xxx)
{
...
(B) lockdep_assert_held(&client_mutex);
...
}
void snd_soc_dai_link_set_capabilities(xxx)
{
...
for_each_pcm_streams(direction) {
...
for_each_link_cpus(dai_link, i, cpu) {
(A) dai = snd_soc_find_dai(cpu);
...
}
...
for_each_link_codecs(dai_link, i, codec) {
(A) dai = snd_soc_find_dai(codec);
...
}
}
...
}
Because of these background, we will get WARNING if .config has CONFIG_LOCKDEP.
WARNING: CPU: 2 PID: 53 at sound/soc/soc-core.c:814 snd_soc_find_dai+0xf8/0x100
CPU: 2 PID: 53 Comm: kworker/2:1 Not tainted 5.7.0-rc1+ #328
Hardware name: Renesas H3ULCB Kingfisher board based on r8a77951 (DT)
Workqueue: events deferred_probe_work_func
pstate: 60000005 (nZCv daif -PAN -UAO)
pc : snd_soc_find_dai+0xf8/0x100
lr : snd_soc_find_dai+0xf4/0x100
...
Call trace:
snd_soc_find_dai+0xf8/0x100
snd_soc_dai_link_set_capabilities+0xa0/0x16c
graph_dai_link_of_dpcm+0x390/0x3c0
graph_for_each_link+0x134/0x200
graph_probe+0x144/0x230
platform_drv_probe+0x5c/0xb0
really_probe+0xe4/0x430
driver_probe_device+0x60/0xf4
snd_soc_find_dai() will be used from (X) CPU/Codec/Platform driver with
mutex lock, and (Y) Card driver without mutex lock.
This snd_soc_dai_link_set_capabilities() is for Card driver,
this means called without mutex.
This patch adds snd_soc_find_dai_with_mutex() to solve it.
Fixes: 25612477d2 ("ASoC: soc-dai: set dai_link dpcm_ flags with a helper")
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87blixvuab.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
commit 25612477d2 ("ASoC: soc-dai: set dai_link dpcm_ flags with a helper")
added snd_soc_dai_link_set_capabilities().
But it is using snd_soc_find_dai() (A) which is required client_mutex (B).
And client_mutex is soc-core.c local.
struct snd_soc_dai *snd_soc_find_dai(xxx)
{
...
(B) lockdep_assert_held(&client_mutex);
...
}
void snd_soc_dai_link_set_capabilities(xxx)
{
...
for_each_pcm_streams(direction) {
...
for_each_link_cpus(dai_link, i, cpu) {
(A) dai = snd_soc_find_dai(cpu);
...
}
...
for_each_link_codecs(dai_link, i, codec) {
(A) dai = snd_soc_find_dai(codec);
...
}
}
...
}
Because of these background, we will get WARNING if .config has CONFIG_LOCKDEP.
WARNING: CPU: 2 PID: 53 at sound/soc/soc-core.c:814 snd_soc_find_dai+0xf8/0x100
CPU: 2 PID: 53 Comm: kworker/2:1 Not tainted 5.7.0-rc1+ #328
Hardware name: Renesas H3ULCB Kingfisher board based on r8a77951 (DT)
Workqueue: events deferred_probe_work_func
pstate: 60000005 (nZCv daif -PAN -UAO)
pc : snd_soc_find_dai+0xf8/0x100
lr : snd_soc_find_dai+0xf4/0x100
...
Call trace:
snd_soc_find_dai+0xf8/0x100
snd_soc_dai_link_set_capabilities+0xa0/0x16c
graph_dai_link_of_dpcm+0x390/0x3c0
graph_for_each_link+0x134/0x200
graph_probe+0x144/0x230
platform_drv_probe+0x5c/0xb0
really_probe+0xe4/0x430
driver_probe_device+0x60/0xf4
snd_soc_find_dai() will be used from (X) CPU/Codec/Platform driver with
mutex lock, and (Y) Card driver without mutex lock.
This snd_soc_dai_link_set_capabilities() is for Card driver,
this means called without mutex.
This patch adds snd_soc_find_dai_with_mutex() to solve it.
Fixes: 25612477d2 ("ASoC: soc-dai: set dai_link dpcm_ flags with a helper")
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87blixvuab.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Changing filter type without disabling codec results in filter
malfunction. Disable codec when changing filter type.
Signed-off-by: Pavel Dobias <dobias@2n.cz>
Link: https://lore.kernel.org/r/20200827102528.29677-1-dobias@2n.cz
Signed-off-by: Mark Brown <broonie@kernel.org>
While the driver waits for DAIs to be probed and retries probing,
have the error messages at debug level instead of error.
Signed-off-by: Akshu Agrawal <akshu.agrawal@amd.com>
Link: https://lore.kernel.org/r/20200826185454.5545-1-akshu.agrawal@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Modify cl_stream_prepare() to return a pointer to the prepared stream
if successful or ERR_PTR() otherwise. This would simplify the error
paths in hda_dsp_cl_boot_firmware() and hda_dsp_cl_boot_firmware_iccmax()
to perform the stream cleanup after FW boot. This change also renders
the function get_stream_with_tag() redundant.
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20200826184532.1612070-9-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Separate the dsp ops for TGL ops to specify the use of ICCMAX
FW boot sequence in the run op. All other ops are identical.
Also separate the TGL descriptors into a separate file to make
it easier to follow.
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20200826184532.1612070-8-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Define the FW boot sequence for platforms that are recommended
to use ICCMAX. This function uses the existing prepare and cleanup
functions for creating a specially crafted capture stream before
powering up the DSP cores.
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20200826184532.1612070-7-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This will be used for the ICCMAX stream as well.
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20200826184532.1612070-6-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Modify the signature of get_stream_with_tag() to add the direction
as an argument to extend it for using with capture streams.
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20200826184532.1612070-5-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
For some platforms, the recommended HW sequence for FW boot involves
starting a specially crafted capture stream before powering
on the DSP cores. Add a helper function to define the minimal
recommended stream programming sequence for this stream.
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20200826184532.1612070-4-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When system is suspended with active audio playback to HDMI/DP, two
alternative sequences can happen at resume:
a) monitor is detected first and ALSA prepare follows normal
stream setup sequence, or
b) ALSA prepare is called first, but monitor is not yet detected,
so PCM is restarted without a pin,
In case of (b), on i915 systems, haswell_verify_D0() is not called at
resume and the pin power state may be incorrect. Result is lack of audio
after resume with no error reported back to user-space.
Fix the problem by always verifying converter and pin state in the
i915_pin_cvt_fixup().
BugLink: https://github.com/thesofproject/linux/issues/2388
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200826170306.701566-1-kai.vehmanen@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
for_each_child_of_node returns a node pointer np with
refcount incremented. So when devm_kzalloc fails, a
pairing refcount decrement is needed to keep np's
refcount balanced.
Fixes: 16395ceee1 ("ASoC: qcom: common: Fix NULL pointer in of parser")
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Link: https://lore.kernel.org/r/20200820042828.10308-1-dinghao.liu@zju.edu.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
devm_regmap_init_sdw() returns a valid pointer on success or ERR_PTR on
failure which should be checked with IS_ERR. Also use PTR_ERR for
returning error codes.
Reported-by: Takashi Iwai <tiwai@suse.de>
Fixes: 7d2a5f9ae4 ("ASoC: rt700: add rt700 codec driver")
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200826163340.3249608-6-vkoul@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
devm_regmap_init_sdw() returns a valid pointer on success or ERR_PTR on
failure which should be checked with IS_ERR. Also use PTR_ERR for
returning error codes.
Reported-by: Takashi Iwai <tiwai@suse.de>
Fixes: d1ede0641b ("ASoC: rt715: add RT715 codec driver")
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200826163340.3249608-5-vkoul@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
devm_regmap_init_sdw() returns a valid pointer on success or ERR_PTR on
failure which should be checked with IS_ERR. Also use PTR_ERR for
returning error codes.
Reported-by: Takashi Iwai <tiwai@suse.de>
Fixes: 320b8b0d13 ("ASoC: rt711: add rt711 codec driver")
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200826163340.3249608-4-vkoul@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
devm_regmap_init_sdw() returns a valid pointer on success or ERR_PTR on
failure which should be checked with IS_ERR. Also use PTR_ERR for
returning error codes.
Reported-by: Takashi Iwai <tiwai@suse.de>
Fixes: a87a6653a2 ("ASoC: rt1308-sdw: add rt1308 SdW amplifier driver")
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200826163340.3249608-3-vkoul@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
devm_regmap_init_sdw() returns a valid pointer on success or ERR_PTR on
failure which should be checked with IS_ERR. Also use PTR_ERR for
returning error codes.
Reported-by: Takashi Iwai <tiwai@suse.de>
Fixes: 56a5b7910e ("ASoC: codecs: max98373: add SoundWire support")
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200826163340.3249608-2-vkoul@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
This series includes fixes for error reporting, topology parsing and
runtime PM issues along with updates for DMIC support and IMX platforms.
Iulian Olaru (2):
ASoC: SOF: imx: Replace sdev->private with sdev->pdata->hw_pdata
ASoC: SOF: sof-of-dev: Add .arch_ops field
Jaska Uimonen (1):
ASoC: SOF: intel: hda: support also devices with 1 and 3 dmics
Keyon Jie (1):
ASoC: SOF: topology: fix the ipc_size calculation for process
component
Rander Wang (1):
ASoC: SOF: fix a runtime pm issue in SOF when HDMI codec doesn't work
Ranjani Sridharan (2):
ASoC: SOF: Intel: hda: report error only for the last ROM init
iteration
ASoC: SOF: Intel: hda: add extended rom status dump to error log
sound/soc/sof/imx/Kconfig | 2 ++
sound/soc/sof/imx/imx8.c | 17 +++++++++----
sound/soc/sof/imx/imx8m.c | 10 +++++---
sound/soc/sof/intel/hda-codec.c | 4 +--
sound/soc/sof/intel/hda-loader.c | 42 +++++++++++++++++++-------------
sound/soc/sof/intel/hda.c | 26 +++++++++++++++++++-
sound/soc/sof/topology.c | 4 +--
7 files changed, 74 insertions(+), 31 deletions(-)
--
2.25.1
Add .arch_ops field in the sof_imx8x_ops structure.
The inclusion of this field will allow the usage of functions from
sof/core.c in order to print debug information such as the registers and
a stack dump in case of a firmware ops.
The SND_SOC_SOF_XTENSA is added in the imx/Kconfig file so the compilation
is successful.
Signed-off-by: Iulian Olaru <iulianolaru249@yahoo.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@gmail.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20200825235040.1586478-8-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The correct way to save private data is to use sdev->pdata->hw_pdata.
Removed superfluous type-casts.
Signed-off-by: Iulian Olaru <iulianolaru249@yahoo.com>
Reviewed-by: Daniel Baluta <daniel.baluta@gmail.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20200825235040.1586478-7-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Dump the extended ROM status information to the error logs
to aid with remote support. The analysis of these logs requires
access to non-public technical information.
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Jaska Uimonen <jaska.uimonen@intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20200825235040.1586478-6-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The topology private struct is used for token parsing and its size
should not be included to the ipc_size, fix it here though it didn't
cause any real issue as the Firmware won't use this wrong-added data.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Jaska Uimonen <jaska.uimonen@intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20200825235040.1586478-5-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently the dmic check code supports only devices with 2 or 4 dmics.
With other dmic counts the function will return 0. Lately we've seen
devices with only 1 dmic thus enable also configurations with 1, and
possibly 3, dmics. Add also topology postfix -1ch and -3ch for new dmic
configuration.
Signed-off-by: Jaska Uimonen <jaska.uimonen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20200825235040.1586478-4-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When hda_codec_probe() doesn't initialize audio component, we disable
the codec and keep going. However,the resources are not released. The
child_count of SOF device is increased in snd_hdac_ext_bus_device_init
but is not decrease in error case, so SOF can't get suspended.
snd_hdac_ext_bus_device_exit will be invoked in HDA framework if it
gets a error. Now copy this behavior to release resources and decrease
SOF device child_count to release SOF device.
Signed-off-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20200825235040.1586478-3-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The FW boot sequence includes multiple attempts for ROM init.
When it does take more than one attempt, we should not log the
errors encountered during the failed attempts and only log them
during the final iteration.
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20200825235040.1586478-2-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds an IPC initiated debug box region in the snd_sof_dev
structure, defined in soc/sof/sof-priv.h. It is initialized at loading,
in the sof_get_windows function from soc/sof/loader.c, in a similar manner
with the stream box and host box.
This region is useful because the firmware will put an error message
here so the kernel can read it in case of a dsp oops.
Signed-off-by: Iulian Olaru <iulianolaru249@yahoo.com>
Reviewed-by: Daniel Baluta <daniel.baluta@gmail.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20200825235854.1588034-5-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The debug ABI can be extracted from the extended manifest content.
This information known at build time does not need to be provided
in a mailbox.
Signed-off-by: Karol Trzcinski <karolx.trzcinski@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20200825235854.1588034-4-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
sdev->info_window is allocated with kmemdup and never freed, use devm_
version since this is only used for first boot.
Fixes: 8d809c15ac ('ASoC: SOF: ext_manifest: parse windows')
Cc: Karol Trzcinski <karolx.trzcinski@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@gmail.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20200825235854.1588034-3-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This step is needed to add possibility to pack sof_ipc_window inside
another one in used FW build tools - for example in extended manifest.
Structure reusability leads to easy parsing function reuse, so source
code is shorter and easier to maintain.
Using structures with constant size is less tricky and properly
supported by each toolchain by contrast to variable size elements.
This is minor ABI change - backward compatibility is kept.
Signed-off-by: Karol Trzcinski <karolx.trzcinski@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20200825235854.1588034-2-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The Galaxy Book Ion NT950XCJ-X716A (15 inches) uses the same ALC298
codec as other Samsung laptops which have the no headphone sound bug. I
confirmed on my own hardware that this fixes the bug.
This also correct the model name for the 13 inches version. It was
incorrectly referenced as NT950XCJ-X716A in commit e17f02d05. But it
should have been NP930XCJ-K01US.
Fixes: e17f02d055 ("ALSA: hda/realtek: Add quirk for Samsung Galaxy Book Ion")
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=207423
Signed-off-by: Adrien Crivelli <adrien.crivelli@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200826084014.211217-1-adrien.crivelli@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add headphone gain and DAC filter controls, which use the same commands
as the AE-5. Also, change input source enumerated control item count to
exclude front microphone.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Link: https://lore.kernel.org/r/20200825201040.30339-20-conmanx360@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add AE-7 quirk data for setting of microphone. The AE-7 has no front
panel connector, so only rear-mic/line-in have new commands.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Link: https://lore.kernel.org/r/20200825201040.30339-19-conmanx360@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add structures containing the changes that need to happen on output
selection for each quirk. This should streamline the addition of new
quirks.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Link: https://lore.kernel.org/r/20200825201040.30339-9-conmanx360@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Remove the output structures that were in use before and instead set the
DSP commands line by line. Now that the commands use is known, it makes
the functionality more clear this way.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Link: https://lore.kernel.org/r/20200825201040.30339-8-conmanx360@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Remove the surround output selection and merge it with the speaker
output selection. Now that the extra commands that were being run on
surround output setting are known, there's no need to have it be
separate.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Link: https://lore.kernel.org/r/20200825201040.30339-7-conmanx360@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add bass redirection controls for surround outputs. This uses the DSP to
redirect audio below the bass redirection crossover frequency to the LFE
channel from the front/rear L/R speakers. This only goes into effect if
the speakers aren't set as full range, and only if the surround
configuration has an LFE channel.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Link: https://lore.kernel.org/r/20200825201040.30339-6-conmanx360@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add functions for setting full-range speakers and controls to
enable/disable the setting. Setting a speaker to full-range means that
the channels won't have their bass redirected to the LFE channel.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Link: https://lore.kernel.org/r/20200825201040.30339-5-conmanx360@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add a surround channel configuration enumeration control. Setting up
different channel configurations allows the DSP to upmix stereo audio
into multi-channel audio, and allows for redirection of bass to a
subwoofer.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Link: https://lore.kernel.org/r/20200825201040.30339-4-conmanx360@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Cleanup the ca0132_mmio_init function, separating into two separate
functions, one for Sound Blaster Z/ZxR/Recon3D, and another for the
AE-5.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Link: https://lore.kernel.org/r/20200825201040.30339-2-conmanx360@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch extends support for DJM-250MK2 and allows recording.
However, DVS is not possible yet (see the comment in code).
Signed-off-by: František Kučera <franta-linux@frantovo.cz>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200825153113.6352-1-konference@frantovo.cz
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The ARRAY_SIZE() is the number of the elements but we want to use the
number of bytes. Fortunately, in this case the value is the same so it
doesn't affect runtime.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20200825104623.GA278587@mwanda
Signed-off-by: Mark Brown <broonie@kernel.org>
We use HDaudio and HDAudio, pick one to make searches easier.
No functionality change
Reported-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200824200912.46852-9-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Mirror change suggested in legacy HDaudio driver.
On SKL+ Intel platforms, the driver selection is handled by the
snd_intel_dspcfg, and when the HDaudio legacy driver is not selected,
be it with the auto-selection or user preferences with a kernel
parameter, the probe aborts with no logs, only a -ENODEV return value.
Having no dmesg trace, even with dynamic debug enabled, makes support
more complicated than it needs to be, and even experienced users can
be fooled. A simple dev_dbg() trace solves this problem.
BugLink: https://github.com/thesofproject/linux/issues/2330
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200824200912.46852-8-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When the probe relies on a workqueue, the completion is not signaled
by a return value. Mirror the log already present for PCI probe, so
that CI checks can test if the probe actually worked by filtering the
console logs.
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200824200912.46852-7-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When using dynamic debug, the console is swamped with verbose position
pointer logs, which really don't add much information. Move then to
vdbg to keep traces usable and allow for easier end-user support.
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200824200912.46852-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Virtual widgets are added to topology to be compatible with legacy
machine drivers. Reduce the log level for messages printed when
such widgets are ignored by the SOF driver.
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200824200912.46852-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Looks like it was left over from the previous implementation of
DMIC PDM token parsing. It is not used anymore.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200824200912.46852-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Several fields in struct snd_sof_dev are used as boolean flags, use
the "bool" type for them.
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200824200912.46852-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Remove two cases of redundant variable initialisation.
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200824200912.46852-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
commit 059374fe9e ("ASoC: ti: merge .digital_mute() into .mute_stream()")
merged .digital_mute() into .mute_stream().
But it didn't rename ams_delta_digital_mute() to ams_delta_mute().
This patch fixup it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/r/87blizy5ts.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Some sound card try to set 0 Hz as reset, but it is impossible.
This patch ignores it to avoid error return.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87a6yjy5sy.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This reverts commit 61eee4a7fc ("ALSA: hda: Add support for Loongson
7A1000 controller") to fix the following error on the Loongson LS7A
platform:
rcu: INFO: rcu_preempt self-detected stall on CPU
<SNIP>
NMI backtrace for cpu 0
CPU: 0 PID: 68 Comm: kworker/0:2 Not tainted 5.8.0+ #3
Hardware name: , BIOS
Workqueue: events azx_probe_work [snd_hda_intel]
<SNIP>
Call Trace:
[<ffffffff80211a64>] show_stack+0x9c/0x130
[<ffffffff8065a740>] dump_stack+0xb0/0xf0
[<ffffffff80665774>] nmi_cpu_backtrace+0x134/0x140
[<ffffffff80665910>] nmi_trigger_cpumask_backtrace+0x190/0x200
[<ffffffff802b1abc>] rcu_dump_cpu_stacks+0x12c/0x190
[<ffffffff802b08cc>] rcu_sched_clock_irq+0xa2c/0xfc8
[<ffffffff802b91d4>] update_process_times+0x2c/0xb8
[<ffffffff802cad80>] tick_sched_timer+0x40/0xb8
[<ffffffff802ba5f0>] __hrtimer_run_queues+0x118/0x1d0
[<ffffffff802bab74>] hrtimer_interrupt+0x12c/0x2d8
[<ffffffff8021547c>] c0_compare_interrupt+0x74/0xa0
[<ffffffff80296bd0>] __handle_irq_event_percpu+0xa8/0x198
[<ffffffff80296cf0>] handle_irq_event_percpu+0x30/0x90
[<ffffffff8029d958>] handle_percpu_irq+0x88/0xb8
[<ffffffff80296124>] generic_handle_irq+0x44/0x60
[<ffffffff80b3cfd0>] do_IRQ+0x18/0x28
[<ffffffff8067ace4>] plat_irq_dispatch+0x64/0x100
[<ffffffff80209a20>] handle_int+0x140/0x14c
[<ffffffff802402e8>] irq_exit+0xf8/0x100
Because AZX_DRIVER_GENERIC can not work well for Loongson LS7A HDA
controller, it needs some workarounds which are not merged into the
upstream kernel at this time, so it should revert this patch now.
Fixes: 61eee4a7fc ("ALSA: hda: Add support for Loongson 7A1000 controller")
Cc: <stable@vger.kernel.org> # 5.9-rc1+
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Link: https://lore.kernel.org/r/1598348388-2518-1-git-send-email-yangtiezhu@loongson.cn
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The WAKEEN bits are used to indicate which bits in the
STATESTS register may cause wake event during the codec
state change request. Configure the WAKEEN register for
the Tegra to detect the wake events.
Signed-off-by: Mohan Kumar <mkumard@nvidia.com>
Acked-by: Sameer Pujar <spujar@nvidia.com>
Link: https://lore.kernel.org/r/20200825052415.20626-3-mkumard@nvidia.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The Tegra HDA codec HW implementation has an issue related to not
swapping the 2 channel Audio Sample Packet(ASP) channel mapping.
Whatever the FL and FR mapping specified the left channel always
comes out of left speaker and right channel on right speaker. So
add condition to disallow the swapping of FL,FR during the playback.
Signed-off-by: Mohan Kumar <mkumard@nvidia.com>
Acked-by: Sameer Pujar <spujar@nvidia.com>
Link: https://lore.kernel.org/r/20200825052415.20626-2-mkumard@nvidia.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
snd_ca0106_spi_write() returns 1 on error, snd_ca0106_pcm_power_dac()
is returning the error code directly, and the caller is expecting an
negative error code
Signed-off-by: Tong Zhang <ztong0001@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200824224541.1260307-1-ztong0001@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When the playback & capture streams are stopped simultaneously, the
SOF PCI device will remain pm_runtime active. The root-cause is a race
condition with two threads reaching the trigger function at the same
time. They see another stream is active so the dapm pin is not
disabled, so the codec remains active as well as the parent PCI
device.
For max98373, the capture stream provides feedback when playback is
working and it is unused when playback is stopped. So the dapm pin
should be set only when playback is active.
Fixes: 94d2d08974 ('ASoC: Intel: Boards: tgl_max98373: add dai_trigger function')
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200821195603.215535-7-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This series updates the tables used to select SoundWire configurations
for CometLake and TigerLake, and adds support for SDCA (SoundWire
Device Class for Audio) codecs in the common machine driver. These
codec drivers are still being tested on early silicon/boards and will
be contributed at a later time.
For TigerLake Chromebooks a new DMI quirk is added, as well as a means
to override the topology names. A pm_runtime fix is also provided to
deal with playback/capture dependencies with an amplifier w/
feedback. I also included a minor codec correction for the TGL
amplifier.
Bard Liao (5):
ASoC: Intel: modify SoundWire version id in acpi match table
ASoC: Intel: sof_sdw: check SoundWire version when matching codec
ASoC: Intel: sof_sdw: rename id as part_id
ASoC: Intel: sof_sdw: add rt711 rt1316 rt714 SDCA codec support.
ASoC: Intel: sof_sdw: clean-up inclusion of header files
Pierre-Louis Bossart (5):
ASoC: Intel: soc-acpi: cnl: add support for rt5682 on SoundWire link2
ASoC: Intel: sof-soundwire: add support for rt5682 on link2
ASoC: Intel: soc-acpi: mirror CML and TGL configurations
ASoC: Intel: soc-acpi: add support for SDCA boards
ASoC: codecs: max98373-sdw: add missing test on resume
Rander Wang (2):
ASoC: Intel: tgl_max98373: fix a runtime pm issue in multi-thread case
ASoC: Intel: sof_sdw: Add support for product Ripto
Sathyanarayana Nujella (2):
ASoC: Intel: sof_rt5682: override quirk data for tgl_max98373_rt5682
ASoC: SOF: Add topology filename override based on dmi data match
sound/soc/codecs/max98373-sdw.c | 3 +
sound/soc/intel/boards/Kconfig | 3 +
sound/soc/intel/boards/Makefile | 7 +-
sound/soc/intel/boards/sof_maxim_common.c | 7 +-
sound/soc/intel/boards/sof_rt5682.c | 13 ++
sound/soc/intel/boards/sof_sdw.c | 98 +++++++---
sound/soc/intel/boards/sof_sdw_common.h | 22 ++-
sound/soc/intel/boards/sof_sdw_dmic.c | 1 +
sound/soc/intel/boards/sof_sdw_max98373.c | 2 +
sound/soc/intel/boards/sof_sdw_rt1308.c | 2 +
sound/soc/intel/boards/sof_sdw_rt1316.c | 113 ++++++++++++
sound/soc/intel/boards/sof_sdw_rt5682.c | 2 +
sound/soc/intel/boards/sof_sdw_rt700.c | 2 +
sound/soc/intel/boards/sof_sdw_rt711.c | 2 +
sound/soc/intel/boards/sof_sdw_rt711_sdca.c | 174 ++++++++++++++++++
sound/soc/intel/boards/sof_sdw_rt715_sdca.c | 42 +++++
.../intel/common/soc-acpi-intel-cml-match.c | 79 +++++++-
.../intel/common/soc-acpi-intel-cnl-match.c | 33 +++-
.../intel/common/soc-acpi-intel-icl-match.c | 10 +-
.../intel/common/soc-acpi-intel-tgl-match.c | 165 ++++++++++++++++-
sound/soc/sof/intel/hda.c | 8 +-
sound/soc/sof/sof-pci-dev.c | 24 +++
22 files changed, 764 insertions(+), 48 deletions(-)
create mode 100644 sound/soc/intel/boards/sof_sdw_rt1316.c
create mode 100644 sound/soc/intel/boards/sof_sdw_rt711_sdca.c
create mode 100644 sound/soc/intel/boards/sof_sdw_rt715_sdca.c
base-commit: fcea8b023a
--
2.25.1
Regmap initialization may return -EPROBE_DEFER for clock
may not be ready, so check -EPROBE_DEFER error type before
start another Regmap initialization.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Link: https://lore.kernel.org/r/1598255887-1391-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
"AVDD" is for analog power supply, "DVDD" is for digital power
supply, they can improve the power management.
As the regulator is enabled in pm runtime resume, which is
behind the component driver probe, so accessing registers in
component driver probe will fail. Fix this issue by enabling
regcache_cache_only after pm_runtime_enable.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1598190877-9213-2-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
"struct snd_soc_dapm_widget" and "struct snd_kcontrol_new" are used in most
of these .c files. Adding the header files to prevent from depending on
<sound/soc.h>
Reported-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200821195603.215535-17-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add topology filename override based on system DMI data matching,
typically to account for a different hardware layout.
In ACPI based systems, the tplg_filename is pre-defined in an ACPI
machine table. When a DMI quirk is detected, the
sof_pdata->tplg_filename is not set with the hard-coded ACPI value,
and instead is set with the DMI-specific filename.
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200821195603.215535-14-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
A Chrome System based on tgl_max98373_rt5682 has different SSP interface
configurations. Using DMI data of this variant DUT, override quirk
data.
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com>
Signed-off-by: Mac Chiang <mac.chiang@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200821195603.215535-13-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Ripto is another product based on TGL with the same
audio hardware configuration as Volteer.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200821195603.215535-12-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The "id" field in sof_sdw_codec_info struct is actually the "part
id". Rename to prevent confusions.
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200821195603.215535-10-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Some codecs with the same part id but different SoundWire versions
have different configurations. So we have to separate them in
codec_info_list[].
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200821195603.215535-9-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
All existing SoundWire codecs follow the same pattern on resume,
except for this codec which doesn't test if the hardware is
initialized.
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200821195603.215535-8-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When the playback & capture streams are stopped simultaneously, the
SOF PCI device will remain pm_runtime active. The root-cause is a race
condition with two threads reaching the trigger function at the same
time. They see another stream is active so the dapm pin is not
disabled, so the codec remains active as well as the parent PCI
device.
For max98373, the capture stream provides feedback when playback is
working and it is unused when playback is stopped. So the dapm pin
should be set only when playback is active.
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200821195603.215535-7-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The description and board layout is similar to previous ones for
CometLake and TigerLake, except for a bump to SoundWire 1.2 and
updates to part numbers to reflect the SDCA (SoundWire Device Class
for Audio) hardware support.
Note that one of the RT1316 amplifiers uses a non-zero UniqueID which
is not required and will be ignored.
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Jaska Uimonen <jaska.uimonen@intel.com>
Reviewed-by: Rander Wang <rander.wang@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200821195603.215535-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Some TGL devices use the same audio hardware as on CML platforms, with
RT711 on link0, RT1308 on link1 and optionally link2, and RT715 on
link 3.
To clarify configurations, the rt1308 configurations are split between
single amp on link1 and dual amps on link1. The case with two amps on
different links is already identified with the group1 attribute.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200821195603.215535-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The UpExtreme board provides support for SoundWire link2 in 2 of the 3
advanced modes. Let's use it w/ rt5682.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200821195603.215535-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add one of the configurations for rt5682 w/ the Up Extreme Advanced
Audio mode using the SoundWire link2.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200821195603.215535-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The SoundWire version id of the existing RT1308, RT711, and RT715
codecs should be 2 (index for SoundWire 1.1), it was mistakenly set as
1 which pointed to the wrong version (SoundWire 1.0).
This off-by-one error had no functional impact so far since the
version number was not used, however in future patches this version
will be required.
Reviewed-by: Rander Wang <rander.wang@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200821195603.215535-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The commit 51ab5d77dc ("ALSA: usb-audio: Properly match with audio
interface class") converted the quirk entries that have both vid/pid
pair and bInterface fields to match with all those with a new macro
USB_AUDIO_CLASS(). However, it turned out that those are false
conversions; all those (but the unknown KeithMcMillen device) are
actually with vendor-specific interface class, hence the conversions
broke the matching.
This patch corrects those entries to the right one,
USB_DEVICE_VENDOR_SPEC() (and USB_DEVICE() for KeithMcMillen to be
sure), and drop the unused USB_AUDIO_CLASS macro again.
Fixes: 51ab5d77dc ("ALSA: usb-audio: Properly match with audio interface class")
Reported-by: Alexander Tsoy <alexander@tsoy.me>
Link: https://lore.kernel.org/r/20200823113251.10175-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Correct quirk table entries for Lenovo ThinkStation P620, too.
The name and profile strings are now set from a different table, hence
removed.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
If USB autosuspend is enabled, both front and rear panel can no longer
detect jack insertion.
Enable USB remote wakeup, i.e. needs_remote_wakeup = 1, doesn't help
either.
So disable USB autosuspend to prevent missing jack detection event.
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Link: https://lore.kernel.org/r/20200823105854.26950-1-kai.heng.feng@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Tascam FE-8 is known to support communication by asynchronous transaction
only. The support can be implemented in userspace application and
snd-firewire-ctl-services project has the support. However, ALSA
firewire-tascam driver is bound to the model.
This commit changes device entries so that the model is excluded. In a
commit 53b3ffee78 ("ALSA: firewire-tascam: change device probing
processing"), I addressed to the concern that version field in
configuration differs depending on installed firmware. However, as long
as I checked, the version number is fixed. It's safe to return version
number back to modalias.
Fixes: 53b3ffee78 ("ALSA: firewire-tascam: change device probing processing")
Cc: <stable@vger.kernel.org> # 4.4+
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20200823075537.56255-1-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
A collection of small fixes over several drivers, but all are driver-
specific and nothing looks scary. Slightly large changes are seen in
ASoC qcom driver for the bugs that were revealed by the recent ASoC
core change to report the invalid register access errors. Also ASoC
fsl got a slight intensive change for the distortion fix. Others are
only trivial fixes or device-specific quirks.
-----BEGIN PGP SIGNATURE-----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=T8Rb
-----END PGP SIGNATURE-----
Merge tag 'sound-5.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of small fixes over several drivers, but all are driver-
specific and nothing looks scary.
Slightly large changes are seen in ASoC qcom driver for the bugs that
were revealed by the recent ASoC core change to report the invalid
register access errors. Also ASoC fsl got a slight intensive change
for the distortion fix.
Others are only trivial fixes or device-specific quirks"
* tag 'sound-5.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (25 commits)
ALSA: hda: avoid reset of sdo_limit
ALSA: hda/realtek: Add quirk for Samsung Galaxy Book Ion
ALSA: usb-audio: ignore broken processing/extension unit
ASoC: intel: Fix memleak in sst_media_open
ASoC: wm8994: Avoid attempts to read unreadable registers
ASoC: msm8916-wcd-analog: fix register Interrupt offset
ASoC: wm8994: Prevent access to invalid VU register bits on WM1811
ALSA: hda/realtek: Add model alc298-samsung-headphone
ALSA: usb-audio: Update documentation comment for MS2109 quirk
ALSA: isa: fix spelling mistakes in the comments
ALSA: usb-audio: Add capture support for Saffire 6 (USB 1.1)
ALSA: hda/realtek: Add quirk for Samsung Galaxy Flex Book
ASoC: q6routing: add dummy register read/write function
ASoC: q6afe-dai: mark all widgets registers as SND_SOC_NOPM
ASoC: Make soc_component_read() returning an error code again
ASoC: amd: Replacing component->name with codec_dai->name.
ASoC: fsl: Fix unused variable warning
ASoC: tegra: tegra210_i2s: Fix compile warning with CONFIG_PM=n
ASoC: tegra: tegra210_dmic: Fix compile warning with CONFIG_PM=n
ASoC: tegra: tegra210_ahub: Fix compile warning with CONFIG_PM=n
...
Previous improvements around handling device and codec level
probe functionality added the possibility of the voltage level
being undefined for the scenario where the IO voltage retrieved
from the regulator supply was below 1.2V, whereas previously the
code defaulted to the 2.5V to 3.6V range in that case. This
commit restores the default value to avoid this happening.
Fixes: aa5b18d1c2 ("ASoC: da7219: Move soft reset handling to codec level probe")
Reported-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com>
Link: https://lore.kernel.org/r/20200821142259.C2ECE3FB96@swsrvapps-01.diasemi.com
Signed-off-by: Mark Brown <broonie@kernel.org>
On Linux 5.9-rc1 I get the following warning with apq8016-sbc:
WARNING: CPU: 2 PID: 69 at sound/core/init.c:207 snd_card_new+0x36c/0x3b0 [snd]
CPU: 2 PID: 69 Comm: kworker/2:1 Not tainted 5.9.0-rc1 #1
Workqueue: events deferred_probe_work_func
pc : snd_card_new+0x36c/0x3b0 [snd]
lr : snd_card_new+0xf4/0x3b0 [snd]
Call trace:
snd_card_new+0x36c/0x3b0 [snd]
snd_soc_bind_card+0x340/0x9a0 [snd_soc_core]
snd_soc_register_card+0xf4/0x110 [snd_soc_core]
devm_snd_soc_register_card+0x44/0xa0 [snd_soc_core]
apq8016_sbc_platform_probe+0x11c/0x140 [snd_soc_apq8016_sbc]
This warning was introduced in
commit 81033c6b58 ("ALSA: core: Warn on empty module").
It looks like we are supposed to set card->owner to THIS_MODULE.
Fix this for all the qcom ASoC drivers.
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Fixes: 79119c7986 ("ASoC: qcom: Add Storm machine driver")
Fixes: bdb052e81f ("ASoC: qcom: add apq8016 sound card support")
Fixes: a6f933f63f ("ASoC: qcom: apq8096: Add db820c machine driver")
Fixes: 6b1687bf76 ("ASoC: qcom: add sdm845 sound card support")
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20200820154511.203072-1-stephan@gerhold.net
Signed-off-by: Mark Brown <broonie@kernel.org>
We may allocate some resources in sof_sdw_codec_info .init function.
Adding a corresponding .exit function can help to release these resources.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200820134542.8682-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The TLV320AIC32x4 is commonly used on TQ-Systems starterkit mainboards
for i.MX-based SoMs (i.MX6Q/DL, i.MX6UL, i.MX7) and LS1021A.
Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Link: https://lore.kernel.org/r/20200821071153.7317-2-matthias.schiffer@ew.tq-group.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use constraint to make sure the period size could always be multiple
of 1ms to align with the fundamental design/limitation of firmware.
Signed-off-by: Brent Lu <brent.lu@intel.com>
Link: https://lore.kernel.org/r/1596198365-10105-2-git-send-email-brent.lu@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Select SoundWire capabilities on newer Intel platforms, starting with
CannonLake/CoffeeLake/CometLake.
As done for HDaudio, the SoundWire link is an opt-in capability. We
explicitly test for ACPI to avoid warnings on unmet dependencies on
the SoundWire side.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20200819124429.3785-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently drvdata->clks is not being checked for an allocation failure,
leading to potential null pointer dereferencing. Fix this by adding a
check and returning -ENOMEM if an error occurred.
Fixes: 1220f6a76e ("ASoC: qcom: Add common array to initialize soc based core clocks")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Rohit kumar <rohitkr@codeaurora.org>
Addresses-Coverity: ("Dereference null return value")
Link: https://lore.kernel.org/r/20200819160103.164893-1-colin.king@canonical.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The s3c_gpio_cfgall_range() function is an internal interface of the
samsung gpio driver and should not be called directly by drivers, so
move the iis pin initialization into the boards.
This means the pin configuration is only run once at early boot, rather
than each time the driver binds, but the effect should be the same.
Note that the s3c2412-i2s driver has no boards using it in mainline linux,
the driver gets selected for the jive machine but is never instantiated.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20200806182059.2431-28-krzk@kernel.org
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAl89eogTHGJyb29uaWVA
a2VybmVsLm9yZwAKCRAk1otyXVSH0Ko0B/9icB170ZABvmA6+P+QPM+zpKI3+Kfu
zrrkt+ZLA3B0ldWCv245v8QStIxnKI5Zlo/Letxgu72R4JJLl0KzIYQek3ywjUS7
+0n3q8mcz+RbQ0hegGNe0W6FHlIZk55aw6aCyCBymmkXM0xnyMDMvvqSpDr2hB5S
rf+yjzxZSRpiu43esY4nyBQ2AovlNdzzH8KywjeUABJ9PF6mLeJr8QHlkgJQLCi5
AhcDFs+iQNoT9hf2IdSY36KU+5IXqnYC6vFOWuaOhSoN4erwbjw7AsefsVE16HTo
LzQEW5Kl1We4dnpKbV49cBU7ahvCLh4k3VWHo551BQrGR1oqDIVE0/pi
=+eMQ
-----END PGP SIGNATURE-----
Merge tag 'samsung-platdrv-boards' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into next/soc-s3c-cleanup
Pull Samsung S3C ASoC cleanup patches from Mark Brown. These patches
are part of the entire cleanup series so all further work depends on
them.
There are a few entries in the quirk table that set the device ID with
USB_DEVICE() macro while having an extra bInterfaceClass field. But
bInterfaceClass field is never checked unless the proper match_flags
is set, so those may match incorrectly with all interfaces.
Introduce another macro to match with the vid/pid pair and the audio
class interface, and apply it to such entries, so that they can match
properly.
Link: https://lore.kernel.org/r/20200817082140.20232-4-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Introduce a new macro USB_AUDIO_DEVICE() for the entries matching with
the pid/vid pair and the class/subclass, and remove the open-code.
Link: https://lore.kernel.org/r/20200817082140.20232-3-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
So far we've added the devices that need vendor/product string renames
or the profile setup into the standard quirk table in quirks-table.h.
This table is imported into the primary USB audio device entry, hence
it's all exported for the probing so that udev and co can take a look
at it. OTOH, for renaming or profile setup, we don't need to expose
those explicit entries because the probe itself follows the standard
way. That said, we're exposing unnecessarily too many entries.
This patch moves such internal quirk entries into the own table, and
reduces the exported device table size. Along with the moving items,
re-arrange the entries in the proper order.
Link: https://lore.kernel.org/r/20200817082140.20232-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The plat-samsung directory and mach-s5pv210 can be build
completely independently, so split the two Kconfig symbols
CONFIG_PLAT_SAMSUNG and CONFIG_ARCH_S5PV210.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Thierry Reding <thierry.reding@gmail.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20200806182059.2431-18-krzk@kernel.org
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Due to a mistake made while reordering patches, commit 90cac93297
("ASoC: sun8i-codec: Fix DAPM to match the hardware topology") added
the sun8i_codec_component_probe function without referencing it from
the component definition. Add the reference so the probe function gets
called as expected.
Fixes: 90cac93297 ("ASoC: sun8i-codec: Fix DAPM to match the hardware topology")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Link: https://lore.kernel.org/r/20200819034038.46418-1-samuel@sholland.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The constant requires indirectly including a machine header file,
but it's not actually used any more since commit 87b132bc03 ("ASoC:
samsung: s3c24{xx,12}-i2s: port to use generic dmaengine API"), so
remove it completely.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20200806182059.2431-27-krzk@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Avoid machine specific headers by using a gpio lookup table
combined with a platform_driver for this board.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20200806182059.2431-26-krzk@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Avoid machine specific headers by using a gpio lookup table
combined with a platform_driver for this board.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20200806182059.2431-25-krzk@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Avoid machine specific headers by using a gpio lookup table
combined with a platform_driver for this board.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20200806182059.2431-24-krzk@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
By default 'sdo_limit' is initialized with a default value of '8'
as per spec. This is overridden in cases where a different value is
required. However this is getting reset when snd_hdac_bus_init_chip()
is called again, which happens during runtime PM cycle.
Avoid this reset by moving 'sdo_limit' setup to 'snd_hdac_bus_init()'
function which would be called only once.
Fixes: 67ae482a59 ("ALSA: hda: add member to store ratio for stripe control")
Cc: <stable@vger.kernel.org>
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Link: https://lore.kernel.org/r/1597851130-6765-1-git-send-email-spujar@nvidia.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add version and class information explicitly to prepare for support
for new devices.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200818141435.29205-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Different modules for HDMI codec are used depending on the
"hda_codec_use_common_hdmi" option being enabled or not. Driver private
context for both of them is different.
This leads to null-pointer dereference error when driver tries to set
autosuspend delay for HDMI codec while the option is off (hdac_hdmi
module is used for HDMI).
Change the string in conditional statement to "ehdaudio0D0" to ensure
that only the HDAudio codec is handled by this function.
Fixes: 5bf73b1b1d ("ASoC: intel/skl/hda - fix oops on systems without i915 audio codec")
Signed-off-by: Mateusz Gorski <mateusz.gorski@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200722173524.30161-1-mateusz.gorski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
A bunch of fixes that came in during the merge window, mostly for issues
that were uncovered by the changes to report errors on invalid register
access plus one important fix in that code itself.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAl88HrYTHGJyb29uaWVA
a2VybmVsLm9yZwAKCRAk1otyXVSH0JA2B/900+o6U6GH+uqk0HfHPt+Kj0cFHHE5
AS88HxKDNQztj2MQwGKQMzbPCUyHLhlzgaqYXx1++9pWmfJ7DOs646UhQ2VenKB8
nVxpkv9FZbdIDiLuEHPL+i+nzcIzPBYR7Hxcn37pqaYzG+DvNAl8VuSufZueQkXi
qVfVT2sCyNDNMnLl/HZ2RwE/sbS43nqn8LH4+Y4dDcIRR9wdVyMWEGBJ4WYlMFOv
3tjg6b9PlRo40RT5CCTcPeTIFniIv8c76TTpUwtvb+fjVMWYnLh9BbDNEa903AGP
AU8CaM3ZEw15NZ008G9Bs04z6WqS/ZCeJTaXK8heKEsSjdsceKDEaicC
=cmGI
-----END PGP SIGNATURE-----
Merge tag 'asoc-fix-v5.9-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v5.9
A bunch of fixes that came in during the merge window, mostly for issues
that were uncovered by the changes to report errors on invalid register
access plus one important fix in that code itself.
It seems the datasheet has never used the word slave for this error
status bit and has always used the term address error. So update the
driver to match the datasheets and also in the process align a bit
better with avoiding the use of such words where possible.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20200818160126.4852-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patchset adds gapless compressed audio support on q6asm.
Gapless on q6asm is implemented using 2 streams in a single q6asm session.
First few patches such as stream id per each command, gapless flags
and silence meta data are for preparedness for adding gapless support.
Last patch implements copy callback to allow finer control over buffer offsets,
specially in partial drain cases.
This patchset is tested on RB3 aka DB845c platform.
This patchset as it is will support gapless however QDSP can also
support switching decoders on a single stream. Patches to support such feature
are send in different patchset which involves adding generic interfaces.
Thanks,
srini
Changes since v2:(mostly suggested by Pierre)
- removed unnessary kernel style comments,
- moved TIMESTAMP flag to respective patch.
- move preparatory code from gapless support patch to new one.
- fix subject prefix of one patch.
- add comments to clarify valid stream_ids
Srinivas Kandagatla (10):
ASoC: q6asm: rename misleading session id variable
ASoC: q6asm: make commands specific to streams
ASoC: q6asm: use flags directly from q6asm-dai
ASoC: q6asm: add length to write command token
ASoC: q6asm: add support to remove intial and trailing silence
ASoC: q6asm: add support to gapless flag in q6asm open
ASoC: q6asm-dai: add next track metadata support
ASoC: q6asm-dai: prepare set params to accept profile change
ASoC: q6asm-dai: add gapless support
ASoC: q6asm-dai: add support to copy callback
sound/soc/qcom/qdsp6/q6asm-dai.c | 414 +++++++++++++++++++++++--------
sound/soc/qcom/qdsp6/q6asm.c | 169 +++++++++----
sound/soc/qcom/qdsp6/q6asm.h | 49 ++--
3 files changed, 469 insertions(+), 163 deletions(-)
--
2.21.0
This patch set reorganises and fixes device and codec level probe/remove
handling within the driver, to allow clean probe and remove at the codec level.
This set relates to an issue raised by Yong Zhi where a codec level re-probe
would fail due to clks still being registered from the previous instantiation.
In addition some improvements around regulator handling and soft reset have
also been included.
Adam Thomson (3):
ASoC: da7219: Move required devm_* allocations to device level code
ASoC: da7219: Move soft reset handling to codec level probe
ASoC: da7219: Fix clock handling around codec level probe
sound/soc/codecs/da7219-aad.c | 85 +++++---
sound/soc/codecs/da7219-aad.h | 3 +
sound/soc/codecs/da7219.c | 493 +++++++++++++++++++++++-------------------
sound/soc/codecs/da7219.h | 1 +
4 files changed, 328 insertions(+), 254 deletions(-)
--
1.9.1
This patch series enables some features on the tlv3204 codec and also fixes some issues faced while testing
v2: Fixed the build error from snd_soc_component_read32
v1: initial ASoC: codec: tlv3204: Codec workaround series
Michael Sit Wei Hong (3):
ASoC: codec: tlv3204: Enable 24 bit audio support
ASoC: codec: tlv3204: Increased maximum supported channels
ASoC: codec: tlv3204: Moving GPIO reset and add ADC reset
sound/soc/codecs/tlv320aic32x4.c | 60 +++++++++++++++++++++++---------
1 file changed, 44 insertions(+), 16 deletions(-)
--
2.17.1
This series performs some minor cleanup on the driver for the analog
codec in the Allwinner A64, and hooks up the existing mute switches to
DAPM widgets, in order to provide improved power management.
Changes since v1:
- Collected Acked-by/Reviewed-by tags
- Used SOC_MIXER_NAMED_CTL_ARRAY to avoid naming a widget "Earpiece"
Samuel Holland (8):
ASoC: sun50i-codec-analog: Fix duplicate use of ADC enable bits
ASoC: sun50i-codec-analog: Gate the amplifier clock during suspend
ASoC: sun50i-codec-analog: Group and sort mixer routes
ASoC: sun50i-codec-analog: Make headphone routes stereo
ASoC: sun50i-codec-analog: Enable DAPM for headphone switch
ASoC: sun50i-codec-analog: Make line out routes stereo
ASoC: sun50i-codec-analog: Enable DAPM for line out switch
ASoC: sun50i-codec-analog: Enable DAPM for earpiece switch
sound/soc/sunxi/sun50i-codec-analog.c | 176 ++++++++++++++++----------
1 file changed, 111 insertions(+), 65 deletions(-)
--
2.26.2
This series fixes a couple of issues with the digital audio codec in the
Allwinner A64 SoC:
1) Left/right channels were swapped when playing/recording audio
2) DAPM topology was wrong, breaking some kcontrols
This is the minimum set of changes necessary to fix these issues in a
backward-compatible way. For that reason, some DAPM widgets still have
incorrect or confusing names; those and other issues will be fixed in
later patch sets.
Samuel Holland (7):
ASoC: dt-bindings: Add a new compatible for the A64 codec
ASoC: sun8i-codec: Fix DAPM to match the hardware topology
ASoC: sun8i-codec: Add missing mixer routes
ASoC: sun8i-codec: Add a quirk for LRCK inversion
ARM: dts: sun8i: a33: Update codec widget names
arm64: dts: allwinner: a64: Update codec widget names
arm64: dts: allwinner: a64: Update the audio codec compatible
.../sound/allwinner,sun8i-a33-codec.yaml | 6 +-
arch/arm/boot/dts/sun8i-a33-olinuxino.dts | 4 +-
arch/arm/boot/dts/sun8i-a33.dtsi | 4 +-
.../dts/allwinner/sun50i-a64-bananapi-m64.dts | 8 +-
.../dts/allwinner/sun50i-a64-orangepi-win.dts | 8 +-
.../boot/dts/allwinner/sun50i-a64-pine64.dts | 8 +-
.../dts/allwinner/sun50i-a64-pinebook.dts | 8 +-
.../dts/allwinner/sun50i-a64-pinephone.dtsi | 8 +-
.../boot/dts/allwinner/sun50i-a64-pinetab.dts | 8 +-
.../allwinner/sun50i-a64-sopine-baseboard.dts | 8 +-
.../boot/dts/allwinner/sun50i-a64-teres-i.dts | 8 +-
arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 11 +-
sound/soc/sunxi/sun8i-codec.c | 137 ++++++++++++++----
13 files changed, 155 insertions(+), 71 deletions(-)
--
2.26.2
This patch series drops a printk message down to dev_dbg() because it
was noisy and then migrates this driver to use clk_hw based APIs instead
of clk based APIs because this device is a clk provider, not a clk
consumer. I've only lightly tested the last two patches but I don't have
all combinations of clks for this device.
Cc: Cheng-Yi Chiang <cychiang@chromium.org>
Cc: Shuming Fan <shumingf@realtek.com>
Stephen Boyd (3):
ASoC: rt5682: Use dev_dbg() in rt5682_clk_check()
ASoC: rt5682: Drop usage of __clk_get_name()
ASoC: rt5682: Use clk_hw based APIs for registration
sound/soc/codecs/rt5682.c | 73 ++++++++++++---------------------------
sound/soc/codecs/rt5682.h | 2 --
2 files changed, 23 insertions(+), 52 deletions(-)
Based on the last patch to this driver in linux-next.
base-commit: 6301adf942
--
Sent by a computer, using git, on the internet
On some platform(.e.g. i.MX8QM MEK), the "extal" clock is different
with the mclk of codec, then the clock rate is also different.
So it is better to get clock rate of "extal" rate by clk_get_rate,
don't reuse the clock rate of mclk.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Link: https://lore.kernel.org/r/1597047103-6863-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently list of Qualcomm drivers is growing, so put them in to a
proper menu so that it does not mix up with other ASOC configs in menuconfig.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20200811105818.7890-1-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
This allows solutions like ALSA UCM to utilize hardware mono downmix
for cases where mono output to a single speaker is desired only in
specific situations (like on a mobile phone).
Signed-off-by: Sebastian Krzyszkowiak <sebastian.krzyszkowiak@puri.sm>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/3662154.EqNIRYjrc8@pliszka
Signed-off-by: Mark Brown <broonie@kernel.org>
There are a couple of occurrences of "the the" in the Kconfig
text. Fix these.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Link: https://lore.kernel.org/r/20200817224706.6139-1-colin.king@canonical.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Drop the repeated words {that, the} in comments.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: alsa-devel@alsa-project.org
Link: https://lore.kernel.org/r/20200808012156.10827-1-rdunlap@infradead.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Follow recommendation in Documentation/scheduler/completion.rst and
use macro to declare local 'struct completion'
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20200813175442.59067-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the new common snd_soc_of_parse_aux_devs() helper function
to parse auxiliary devices from the device tree. The new helper
is just a copy of meson_card_add_aux_devices() so there is no
functional change.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20200801100257.22658-3-stephan@gerhold.net
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the new common snd_soc_of_parse_aux_devs() helper function
to parse auxiliary devices from the device tree. The code is slightly
different but the binding that is parsed is exactly the same.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20200801100257.22658-2-stephan@gerhold.net
Signed-off-by: Mark Brown <broonie@kernel.org>
simple-card.c and meson-card-utils.c use pretty much the same
helper function to parse auxiliary devices from the device tree.
Make it easier for other drivers to parse these from the device tree
as well by adding a shared helper function to soc-core.c.
snd_soc_of_parse_aux_devs() is pretty much a copy of
meson_card_add_aux_devices() from meson-card-utils.c
with two minor changes:
- Make property name configurable as parameter
- Change dev_err() message slightly for consistency with other
error messages in soc-core.c
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20200801100257.22658-1-stephan@gerhold.net
Signed-off-by: Mark Brown <broonie@kernel.org>
"AVDD" is for analog power supply, "DVDD" is for digital power
supply, they can improve the power management.
As the regulator is enabled in pm runtime resume, which is
behind the component driver probe, so accessing registers in
component driver probe will fail. Fix this issue by enabling
regcache_cache_only after pm_runtime_enable.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1597397561-2426-2-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add an binary mixer 'ELD' to each HDMI PCM device so user space
could read the ELD data of external HDMI display.
Signed-off-by: Brent Lu <brent.lu@intel.com>
Link: https://lore.kernel.org/r/20200818004413.12852-1-brent.lu@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix cppcheck warning:
sound/soc/intel/skylake/skl-topology.c:2879:29: style: Variable
'block_size' is assigned a value that is never used. [unreadVariable]
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200813200147.61990-21-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Cppcheck complains about possible NULL pointer dereferences but the
assignments are actually not needed before walking through lists.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200813200147.61990-20-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix cppcheck warning:
sound/soc/intel/skylake/skl-sst-utils.c:240:10: style: Variable 'ret'
is assigned a value that is never used. [unreadVariable]
int ret = 0;
^
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200813200147.61990-19-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix cppcheck warning:
sound/soc/intel/skylake/skl-sst-cldma.c:248:10: style: Variable 'ret'
is assigned a value that is never used. [unreadVariable]
int ret = 0;
^
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200813200147.61990-18-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix cppcheck warning:
sound/soc/intel/skylake/skl-nhlt.c:203:21: style: Variable 'rate' is
assigned a value that is never used. [unreadVariable]
unsigned long rate = 0;
^
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200813200147.61990-17-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix cppcheck warnings:
sound/soc/intel/haswell/sst-haswell-ipc.c:430:8: style: Variable 'i'
is assigned a value that is never used. [unreadVariable]
sound/soc/intel/haswell/sst-haswell-ipc.c:1792:8: style: Variable 'id'
is assigned a value that is never used. [unreadVariable]
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200813200147.61990-16-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix cppcheck warning:
sound/soc/intel/atom/sst/sst_loader.c:401:43: style: Redundant
condition: If 'EXPR == 4', the comparison 'EXPR != 3' is always
true. [redundantCondition]
if (sst_drv_ctx->sst_state != SST_RESET ||
^
In this case, if sst_state == SST_SHUTDOWN then the first test is
already true. 2014 bug, yay.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200813200147.61990-10-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix cppcheck warning:
sound/soc/intel/atom/sst/sst.c:52:20: style: Variable 'size' is
assigned a value that is never used. [unreadVariable]
unsigned int size = 0;
^
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200813200147.61990-9-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix cppcheck warning
return ret_val;
^
sound/soc/intel/atom/sst-mfld-platform-pcm.c:384:6: note: If condition 'ret_val' is true, the function will return/exit
if (ret_val)
^
sound/soc/intel/atom/sst-mfld-platform-pcm.c:387:9: note: Returning identical expression 'ret_val'
return ret_val;
^
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200813200147.61990-8-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix cppcheck warnings:
sound/soc/intel/atom/sst/sst.c:427:13: style: Variable 'ret' is
assigned a value that is never used. [unreadVariable]
int i, ret = 0;
^
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200813200147.61990-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix cppcheck warnings:
sound/soc/intel/atom/sst/sst.c:373:2: warning: Assignment of function
parameter has no effect outside the function. Did you forget
dereferencing it? [uselessAssignmentPtrArg]
ctx = NULL;
^
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200813200147.61990-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix cppcheck warning:
sound/soc/intel/atom/sst-mfld-platform-compress.c:46:14: style:
Variable 'ret_val' is assigned a value that is never
used. [unreadVariable]
int ret_val = 0;
^
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200813200147.61990-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
cppcheck complains of a possible NULL pointer dereference but setting
a pointer before using list_for_each_entry() is not useful.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200813200147.61990-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Some devices have broken extension unit where getting current value
doesn't work. Attempt that once when creating mixer control for it. If
it fails, just ignore it, so that it won't cripple the device entirely
(and/or make the error floods).
Signed-off-by: Tom Yan <tom.ty89@gmail.com>
Link: https://lore.kernel.org/r/5f3abc52.1c69fb81.9cf2.fe91@mx.google.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Previously the driver would use devm_* related functions at
the codec level probe() to allocate clock resources for MCLK
and the DAI clocks exposed by the device. This caused issues
when registering clocks on a re-probe (no device level
remove/prove involved) as the devm_* resources were never
freed up so the clocks were still registered from the previous
codec level probe().
This commit updates the clock handling for MCLK usage and DAI
clock provision to fix this discrepancy and allow the codec level
probe/remove functionality to operate as intended.
Signed-off-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com>
Link: https://lore.kernel.org/r/b92c461baeed27a6cd92e59e36a55c2547218683.1597164865.git.Adam.Thomson.Opensource@diasemi.com
Signed-off-by: Mark Brown <broonie@kernel.org>
As part of the reorganisation of the device level and codec
level probe functionlity, the soft reset handling should really
reside at the codec level and after the instantiation of supplies.
This commit makes the relevant changes to support this change of
scope including the remove of devm_* functions being called for
regulator instantiation at the codec level.
Signed-off-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com>
Link: https://lore.kernel.org/r/f7603a4855647429b754ce76f887ec441622015c.1597164865.git.Adam.Thomson.Opensource@diasemi.com
Signed-off-by: Mark Brown <broonie@kernel.org>
During gapless playback, its possible for previous track to
end at unaligned boundary, starting next track on the same
boundary can lead to unaligned address exception in dsp.
So implement copy callback for finer control on the buffer offsets.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Tested-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20200727093806.17089-11-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support to gapless playback by implementing metadata,
next_track, drain and partial drain support.
Gapless on Q6ASM is implemented by opening 2 streams in a single
q6asm stream and toggling them on next track.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Tested-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20200727093806.17089-10-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
rearrange code so that it will be easy to change the codec
profile at runtime. This means moving exiting set_params
to an internal wrapper which can be called when codec
profile changes.
This is also preparing the code for easy to use in gapless cases.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Tested-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20200727093806.17089-9-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds support to metadata required to do a gapless playback.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Tested-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20200727093806.17089-8-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds support to gapless flag to q6asm_open_write().
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Tested-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20200727093806.17089-7-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds support to ASM_DATA_CMD_REMOVE_INITIAL_SILENCE
and ASM_DATA_CMD_REMOVE_TRAILING_SILENCE q6asm command to support
compressed metadata for gapless playback.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Tested-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20200727093806.17089-6-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Add length to write command packet token so that we can track exactly
how many bytes are consumed by DSP in the command reply.
This is useful in some use-cases where the end of the file/stream
is not aligned with period size.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Tested-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20200727093806.17089-5-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
use flags set by q6asm-dais directly!
This will be useful gapless case where write needs a special flag to indicate
that last buffer.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Tested-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20200727093806.17089-4-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Each ASM session can have multiple streams attached to it,
current design was to allow only one static stream id 1 per each session.
However for use-case like gapless, we would need 2 streams to open per session.
This patch converts all the q6asm apis to take stream id as argument
to allow multiple streams to open on a single session, This is useful
for gapless playback cases.
Now the dai driver can specify which stream id for each command.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Tested-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20200727093806.17089-3-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Each q6asm session can have multiple streams, mixing usage of these
names in variable are bit misleading to reader, so rename them accordingly.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Tested-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20200727093806.17089-2-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Enable I2S TDM audio capture for Intel Keem Bay platform.
The I2S TDM will support 4 channel and 8 channel audio capture only.
4 channel and 8 channel audio capture operates only in slave mode.
Signed-off-by: Michael Sit Wei Hong <michael.wei.hong.sit@intel.com>
Reviewed-by: Sia Jee Heng <jee.heng.sia@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200811041836.999-2-michael.wei.hong.sit@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Moving GPIO reset to a later stage and before clock registration to
ensure that the host system and codec clocks are in sync. If the host
register clock values prior to gpio reset, the last configured codec clock
is registered to the host. The codec then gets gpio resetted setting the
codec clocks to their default value, causing a mismatch. Host system will
skip clock setting thinking the codec clocks are already at the requested
rate.
ADC reset is added to ensure the next audio capture does not have
undesired artifacts. It is probably related to the original code
where the probe function resets the ADC prior to 1st record.
Signed-off-by: Michael Sit Wei Hong <michael.wei.hong.sit@intel.com>
Reviewed-by: Sia Jee Heng <jee.heng.sia@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200812094631.4698-4-michael.wei.hong.sit@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Increased maximum supported channel to 8 channels for audio capture
running in TDM mode.
Signed-off-by: Michael Sit Wei Hong <michael.wei.hong.sit@intel.com>
Reviewed-by: Sia Jee Heng <jee.heng.sia@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200812094631.4698-3-michael.wei.hong.sit@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Enable 24 bit in 32 bit container audio support.
Using the params_physical_width to differentiate
24 bit in 32 bit container and 24 bit in 24 bit container modes.
Use the sample rate, bit depth and channel parameters to
calculate the bit clock needed.
Signed-off-by: Michael Sit Wei Hong <michael.wei.hong.sit@intel.com>
Reviewed-by: Sia Jee Heng <jee.heng.sia@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200812094631.4698-2-michael.wei.hong.sit@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
By including the earpiece mute switch in the DAPM graph, both the
earpiece amplifier and the Mixer/DAC inputs can be powered off when
the earpiece is muted.
While the widget is really just a simple switch, it is represented
as a "mixer with named controls" to avoid including the widget name
in the kcontrol name. Otherwise, it is not possible to give the widget
an accurate, descriptive name without changing the kcontrol name
seen by userspace (which should be stable).
The mute switch is between the source selection and the amplifier,
as per the diagram in the SoC manual.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Link: https://lore.kernel.org/r/20200726025334.59931-9-samuel@sholland.org
Signed-off-by: Mark Brown <broonie@kernel.org>
By including the line out mute switch in the DAPM graph, the
Mixer/DAC inputs can be powered off when the line output is muted.
The line outputs have an unusual routing scheme. The left side mute
switch is between the source selection and the amplifier, as usual.
The right side source selection comes *after* its amplifier (and
after the left side amplifier), and its mute switch controls
whichever source is currently selected. This matches the diagram in
the SoC manual.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Link: https://lore.kernel.org/r/20200726025334.59931-8-samuel@sholland.org
Signed-off-by: Mark Brown <broonie@kernel.org>
This matches the hardware more accurately, and is necessary for
including the (stereo) line out mute switch in the DAPM graph.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Link: https://lore.kernel.org/r/20200726025334.59931-7-samuel@sholland.org
Signed-off-by: Mark Brown <broonie@kernel.org>
By including the headphone mute switch to the DAPM graph, both the
headphone amplifier and the Mixer/DAC inputs can be powered off when
the headphones are muted.
The mute switch is between the source selection and the amplifier,
as per the diagram in the SoC manual.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Link: https://lore.kernel.org/r/20200726025334.59931-6-samuel@sholland.org
Signed-off-by: Mark Brown <broonie@kernel.org>
This matches the hardware more accurately, and is necessary for
including the (stereo) headphone mute switch in the DAPM graph.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Link: https://lore.kernel.org/r/20200726025334.59931-5-samuel@sholland.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Sort the controls in the same order as the bits in the register. Then
group the routes by sink, and sort them in the same order as the
controls. This makes it much easier to verify that all mixer inputs are
accounted for.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Link: https://lore.kernel.org/r/20200726025334.59931-4-samuel@sholland.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The clock must be running for the zero-crossing mute functionality.
However, it must be gated for VDD-SYS to be turned off during system
suspend. Disable it in the suspend callback, after everything has
already been muted, to avoid pops when muting/unmuting outputs.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Link: https://lore.kernel.org/r/20200726025334.59931-3-samuel@sholland.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The same enable bits are currently used for both the "Left/Right ADC"
and the "Left/Right ADC Mixer" widgets. This happens to work in practice
because the widgets are always enabled/disabled at the same time, but
each register bit should only be associated with a single widget.
To keep symmetry with the DAC widgets, keep the bits on the ADC widgets,
and remove them from the ADC Mixer widgets.
Fixes: 42371f327d ("ASoC: sunxi: Add new driver for Allwinner A64 codec's analog path controls")
Reported-by: Ondrej Jirman <megous@megous.com>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Link: https://lore.kernel.org/r/20200726025334.59931-2-samuel@sholland.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix cppcheck warnings:
sound/soc/intel/boards/bdw-rt5650.c:91:23: style: Local variable
'channels' shadows outer variable [shadowVariable]
sound/soc/intel/boards/bdw-rt5677.c:144:23: style: Local variable
'channels' shadows outer variable [shadowVariable]
sound/soc/intel/boards/broadwell.c:91:23: style: Local variable
'channels' shadows outer variable [shadowVariable]
This was fixed earlier in other machine drivers but keeps coming back
with copy/paste.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200813175839.59422-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Cppcheck reports the following warning:
sound/soc/sof/intel/hda-codec.c:191:1: style: Label 'error' is not
used. [unusedLabel]
This label is indeed only used conditionally, move it where it's
actually used.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200813175839.59422-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
On the A64, as tested using the PinePhone, the current code causes the
left/right channels to be swapped during I2S playback from the CPU on
AIF1, and breaks DSP_A communication with the modem on AIF2. Both of
these are fixed when LRCK is no longer inverted.
Trusting that the comment in the code is correct, the existing behavior
is kept for the A33.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Link: https://lore.kernel.org/r/20200726012557.38282-5-samuel@sholland.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The sun8i-codec driver provides ALSA controls for enabling/disabling
each of the inputs to the AIF1 Slot 0 and DAC mixers. For two of these
inputs (ADC->DAC and AIF1 DA0->AIF1 AD0), the audio source is
implemented, so the mixer inputs can be used.
However, because the DAPM routes are missing, these mixer inputs only
work when both the source and the mixer happen to be part of other
active audio paths. Adding the appropriate routes makes these ALSA
controls function all of the time.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Link: https://lore.kernel.org/r/20200726012557.38282-4-samuel@sholland.org
Signed-off-by: Mark Brown <broonie@kernel.org>
