If the ipc_prepare() callback fails for a module instance, on error rewind
we must skip the ipc_unprepare() call for ones that has positive use count.
The positive use count means that the module instance is in active use, it
cannot be unprepared.
The issue affects capture direction paths with branches (single dai with
multiple PCMs), the affected widgets are in the shared part of the paths.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20240612121203.15468-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Jai Luthra <j-luthra@ti.com>:
This series fixes two patches:
1. Fix the dmaengine API usage by calling dmaengine_synchronize() after
dmaengine_terminate_async() when xrun events occur in application
2. Use the McASP AFIFO property from DT to refine the period size,
instead of hardcoding minimum to 64 samples
This accidentally returns success instead of -EINVAL.
Fixes: c91d0c2e19 ("ASoC: samsung: midas_wm1811: Add GPIO-based headset jack detection")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Acked-by: Artur Weber <aweber.kernel@gmail.com>
Link: https://lore.kernel.org/r/01590109-cf27-404b-88ff-b42bb73ca1c6@moroto.mountain
Signed-off-by: Mark Brown <broonie@kernel.org>
When cs35l56 is connected via cs42l43 there isn't an ACPI node for the
cs35l56 so all properties are under the cs42l43 ACPI node. We're adding
a property as a way for the cs42l43 driver to pass this info in via a
software node.
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20240611132556.1557075-3-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Set driver name to "HDMI". This simplifies the code and gets rid of
the following error messages:
ASoC: driver name too long 'HDMI 58040000.encoder' -> 'HDMI_58040000_e'
Signed-off-by: Primoz Fiser <primoz.fiser@norik.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Link: https://lore.kernel.org/r/20240610125847.773394-1-primoz.fiser@norik.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The minimum period size was enforced to 64 as older devices integrating
McASP with EDMA used an internal FIFO of 64 samples.
With UDMA based platforms this internal McASP FIFO is optional, as the
DMA engine internally does some buffering which is already accounted for
when registering the platform. So we should read the actual FIFO
configuration (txnumevt/rxnumevt) instead of hardcoding frames.min to
64.
Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Signed-off-by: Jai Luthra <j-luthra@ti.com>
Link: https://lore.kernel.org/r/20240611-asoc_next-v3-2-fcfd84b12164@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Sometimes the stream may be stopped due to XRUN events, in which case
the userspace can call snd_pcm_drop() and snd_pcm_prepare() to stop and
start the stream again.
In these cases, we must wait for the DMA channel to synchronize before
marking the stream as prepared for playback, as the DMA channel gets
stopped by drop() without any synchronization. Make sure the ALSA core
synchronizes the DMA channel by adding a sync_stop() hook.
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Signed-off-by: Jai Luthra <j-luthra@ti.com>
Link: https://lore.kernel.org/r/20240611-asoc_next-v3-1-fcfd84b12164@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Andy Shevchenko <andriy.shevchenko@linux.intel.com>:
Replace or drop the legacy header that is subject to remove.
Not all of them were compile-tested, the series might have
hidden compilation errors.
Merge series from Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>:
Originally reported here:
https://github.com/thesofproject/avs-topology-xml/issues/22#issuecomment-2127892605
There is various level of failure there, first of all when topology
loads routes, it points directly into FW file, but it may be freed after
topology load. After fixing the above, when avs driver parses topology
it should allocate its own memory, as target strings can be shorter than
needed. Also clean up soc_tplg_dapm_graph_elems_load() a bit.
of_gpio.h is deprecated and subject to remove.
The driver doesn't use it directly, replace it
with what is really being used.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240605221446.2624964-7-andriy.shevchenko@linux.intel.com
Reviewed-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
of_gpio.h is deprecated and subject to remove.
The driver doesn't use it directly, replace it
with what is really being used.
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240605221446.2624964-6-andriy.shevchenko@linux.intel.com
Reviewed-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
of_gpio.h is deprecated and subject to remove.
The driver doesn't use it directly, replace it
with what is really being used.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240605221446.2624964-5-andriy.shevchenko@linux.intel.com
Acked-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
of_gpio.h is deprecated and subject to remove. The drivers in question
don't use it, simply remove the unused header.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240605221446.2624964-4-andriy.shevchenko@linux.intel.com
Reviewed-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
of_gpio.h is deprecated and subject to remove. The drivers in question
don't use it, simply remove the unused header.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240605221446.2624964-3-andriy.shevchenko@linux.intel.com
Reviewed-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
of_gpio.h is deprecated and subject to remove. The drivers in question
don't use it, simply remove the unused header.
Reviewed-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240605221446.2624964-2-andriy.shevchenko@linux.intel.com
Acked-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds audio routing for both playback and capture and
Makefile and Kconfigs changes for wcd937x.
Signed-off-by: Prasad Kumpatla <quic_pkumpatl@quicinc.com>
Co-developed-by: Mohammad Rafi Shaik <quic_mohs@quicinc.com>
Signed-off-by: Mohammad Rafi Shaik <quic_mohs@quicinc.com>
Link: https://lore.kernel.org/r/20240524035535.3119208-8-quic_mohs@quicinc.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds required dapm widgets for capture path.
Signed-off-by: Prasad Kumpatla <quic_pkumpatl@quicinc.com>
Co-developed-by: Mohammad Rafi Shaik <quic_mohs@quicinc.com>
Signed-off-by: Mohammad Rafi Shaik <quic_mohs@quicinc.com>
Link: https://lore.kernel.org/r/20240524035535.3119208-7-quic_mohs@quicinc.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds required dapm widgets for playback.
Signed-off-by: Prasad Kumpatla <quic_pkumpatl@quicinc.com>
Co-developed-by: Mohammad Rafi Shaik <quic_mohs@quicinc.com>
Signed-off-by: Mohammad Rafi Shaik <quic_mohs@quicinc.com>
Link: https://lore.kernel.org/r/20240524035535.3119208-6-quic_mohs@quicinc.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds basic controls found in WCD9370/WCD9375 codec.
Signed-off-by: Prasad Kumpatla <quic_pkumpatl@quicinc.com>
Co-developed-by: Mohammad Rafi Shaik <quic_mohs@quicinc.com>
Signed-off-by: Mohammad Rafi Shaik <quic_mohs@quicinc.com>
Link: https://lore.kernel.org/r/20240524035535.3119208-5-quic_mohs@quicinc.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds basic SoundWire codec driver to support for
WCD9370/WCD9375 TX and RX devices.
The WCD9370/WCD9375 has Multi Button Headset Control hardware to
support Headset insertion, type detection, 8 headset buttons detection,
Over Current detection and Impedence measurements.
This patch adds support for this using wcd-mbhc apis.
Signed-off-by: Prasad Kumpatla <quic_pkumpatl@quicinc.com>
Co-developed-by: Mohammad Rafi Shaik <quic_mohs@quicinc.com>
Signed-off-by: Mohammad Rafi Shaik <quic_mohs@quicinc.com>
Link: https://lore.kernel.org/r/20240524035535.3119208-4-quic_mohs@quicinc.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds support to SoundWire devices on WCD9370/WCD9375 Codec.
The WCD9370/WCD9375 Soundwire devices will be used by the
main WCD9370/WCD9375 Audio Codec driver to access registers
and configure Soundwire RX and TX ports.
Signed-off-by: Prasad Kumpatla <quic_pkumpatl@quicinc.com>
Co-developed-by: Mohammad Rafi Shaik <quic_mohs@quicinc.com>
Signed-off-by: Mohammad Rafi Shaik <quic_mohs@quicinc.com>
Link: https://lore.kernel.org/r/20240524035535.3119208-3-quic_mohs@quicinc.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When headphones are plugged in, they appear absent; when they are removed,
they appear present.
Add a specific entry in bytcr_rt5640 for this device
Signed-off-by: Thomas GENTY <tomlohave@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240608170251.99936-1-tomlohave@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Instead of using very long macro name, assign it to shorter variable
and use it instead. While doing that, we can reduce multiple if checks
using this define to one.
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20240603102818.36165-5-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The routes are allocated with kzalloc(), so all fields are zeroed by
default, skip unnecessary assignments.
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20240603102818.36165-4-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The removed dai_link->platform component cause a fail which
is exposed at runtime. (ex: when a sound tool is used)
This patch re-adds the dai_link->platform component to have
a full card registered.
Before this patch:
:~$ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: CLASSD [CLASSD], device 0: CLASSD PCM snd-soc-dummy-dai-0 []
Subdevices: 1/1
Subdevice #0: subdevice #0
:~$ speaker-test -t sine
speaker-test 1.2.6
Playback device is default
Stream parameters are 48000Hz, S16_LE, 1 channels
Sine wave rate is 440.0000Hz
Playback open error: -22,Invalid argument
After this patch which restores the platform component:
:~$ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: CLASSD [CLASSD], device 0: CLASSD PCM snd-soc-dummy-dai-0
[CLASSD PCM snd-soc-dummy-dai-0]
Subdevices: 1/1
Subdevice #0: subdevice #0
-> Resolve the playback error.
Fixes: 2f650f87c0 ("ASoC: atmel: remove unnecessary dai_link->platform")
Signed-off-by: Andrei Simion <andrei.simion@microchip.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://msgid.link/r/20240604101030.237792-1-andrei.simion@microchip.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Since "Headphone Switch" kcontrol name has already been used by da7219,
rename the control name from "Headphone" to "Headphones" to prevent the
colision. Also, this change makes kcontrol name align with the one in
mt8186-mt6366-da7219-max98357.c.
Fixes: 9c7388baa2 ("ASoC: mediatek: mt8183-da7219-max98357: Map missing jack kcontrols")
Change-Id: I9ae69a4673cd04786b247cc514fdd20f878ef009
Signed-off-by: Hsin-Te Yuan <yuanhsinte@chromium.org>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://msgid.link/r/20240531-da7219-v1-1-ac3343f3ae6a@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
When TRCM mode is enabled, I2S RX and TX clocks are synchronized through
selected clock source. Without this fix BCLK and LRCK might get parented
to an uninitialized MCLK and the DAI will receive data at wrong pace.
However, unlike in original i2s-tdm driver, there is no need to manually
synchronize mclk_rx and mclk_tx, as only one gets used anyway.
Tested on a board with RK3568 SoC and Silergy SY24145S codec with enabled and
disabled TRCM mode.
Fixes: 9e2ab4b18e ("ASoC: rockchip: i2s-tdm: Fix inaccurate sampling rates")
Signed-off-by: Alibek Omarov <a1ba.omarov@gmail.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Link: https://msgid.link/r/20240604184752.697313-1-a1ba.omarov@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:
The sof_ipc4_dma_config_tlv() call makes no sense in case of DSPless
mode since it is a configuration for the firmware.
Merge series from Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>:
We have simple-card / audio-graph / audio-graph2, basically these supports
same feature but is using different DT style.
Because we are using 3 drivers, some feature was added to one driver,
but other drivers doesn't have it. This patch set try to sync it on these
3 drivers.
Merge series from Shengjiu Wang <shengjiu.wang@nxp.com>:
On i.MX95 wakeup domain, there is one instance of Audio XCVR
supporting SPDIF mode with a connection to the Audio XCVR physical
interface.
When switching between OMTP and CTIA headset, we can hear pop noise.
To solve this issue, We modified the configuration for headphone detection
Signed-off-by: Zhang Yi <zhangyi@everest-semi.com>
Link: https://msgid.link/r/20240604021946.2911-1-zhangyi@everest-semi.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Some problematic headsets have been discovered, to help with correctly
identifying these, the detect time must be increased. Also improve the
reliability of the impedance value from the button detect by slightly
increasing the button detect delay.
Fixes: 686b8f711b ("ASoC: cs42l43: Lower default type detect time")
Signed-off-by: Maciej Strozek <mstrozek@opensource.cirrus.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://msgid.link/r/20240604132843.3309114-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in sound/soc/qcom/snd-soc-qcom-sdw.o
Add the missing invocation of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://msgid.link/r/20240603-md-snd-soc-qcom-sdw-v1-1-101ea8bcdd38@quicinc.com
Signed-off-by: Mark Brown <broonie@kernel.org>
On i.MX95, the XCVR uses a new PLL in the PHY, which is
General Purpose (GP) PLL. Add GP PLL configuration support
in the driver and add the 'pll_ver' flag to distinguish
different PLL on different platforms.
The XCVR also use PHY but limited for SPDIF only case
Add 'use_phy' flag to distinguish these platforms.
When there are 'pll8k' and 'pll11k' clock existing, the clock
source of 'phy_clk' can be changed for different sample rate
requirement.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Chancel Liu <chancel.liu@nxp.com>
Link: https://msgid.link/r/1716972002-2315-3-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Follow the convention already in use by other platforms on naming the
sof_dev_desc struct by dropping the underscore between adl and n
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240603072544.5215-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The "ADC2_BCS Disable Switch" control does basically nothing: sets field
in driver's private data structure which is never read again to
configure hardware. Drop the control as it has no effect.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://msgid.link/r/20240523124808.42923-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
All four microphone bias registers have similar layout: VOUT control
mask is exactly the same. Use one define, just like older driver
wcd938x is doing, to make the code a bit simpler.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://msgid.link/r/20240523125049.43713-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Now graph_link_init() is parsing dai_link related property.
Let's handle mclk_fs on it, too.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://msgid.link/r/87v82yfrv0.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Now graph_link_init() is parsing dai_link related property.
Let's handle mclk_fs on it, too.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://msgid.link/r/87y17ufrv8.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Current audio-graph-card is checking if the node name was "ports" or
not when parsing the property.
if (of_node_name_eq(ports, "ports"))
of_xxx(ports, ...);
Now, it is using new port_to_ports() which will be NULL if the node
doesn't have "ports", and each of_xxx functions will do nothing if
node was NULL.
Now we don't need to check ports node name. Let's remove and cleanup it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://msgid.link/r/871q5mh6fv.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Current audio-graph-card is using of_get_parent() to get "port" from
"ep", or get "ports" from "port". But it is difficlut to understand,
and "ports" might not exist.
This patch adds ep_to_port() to get "port" from "ep", and port_to_ports()
to get "ports" from "port". "ports" will be NULL if not exist.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://msgid.link/r/8734q2h6fz.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Now graph_link_init() is parsing dai_link related property.
Let's handle mclk_fs on it, too.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://msgid.link/r/874jaih6g3.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Current dai_link related property are parsed and enabled only on CPU
port node (A)(b)(c). OTOH, Audio Graph Card2 supports many connections
like Multi-CPU, DPCM, Codec2Codec today. For example in Multi-CPU case,
it will be checked via (X) -> (B) -> (b) process, but (X) / (B) part
property is not parsed.
>From dai_link related settings point of view, (B) (C) part and Codec
port also enabled is more viscerally understandable, and useful.
card2 {
(X) links = <&snd-cpu (A)
&snd-multi (B)
&snd-dpcm (C)
...>
multi {
ports {
(B) snd-multi: port { ... };
...
};
};
dpcm {
ports {
(C) snd-dpcm: port { ... };
...
};
};
codec2codec {
...
};
};
cpu_device {
ports {
(A) snd-cpu: port { ... };
(b) mcpu: port { ... };
(c) dcpu: port { ... };
}
};
One note here is that if it was Multi-CPU/Codec case, 1st port only
enabled to have property it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://msgid.link/r/875xuyh6g7.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Current audio-graph-card2 is checking if the node name was "ports" or
not when parsing the property.
if (of_node_name_eq(ports, "ports"))
of_xxx(ports, ...);
Now, it is using new port_to_ports() which will be NULL if the node
doesn't have "ports", and each of_xxx functions will do nothing if
node was NULL.
Now we don't need to check ports node name. Let's remove and cleanup it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://msgid.link/r/877cfeh6gb.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Current audio-graph-card2 is using of_get_parent() to get "port" from
"ep", or get "ports" from "port". But it is difficlut to understand,
and "ports" might not exist.
This patch adds ep_to_port() to get "port" from "ep", and port_to_ports()
to get "ports" from "port". "ports" will be NULL if not exist.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://msgid.link/r/878qzuh6gf.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
soc-pcm.c :: soc_get_playback_capture() will indicate error
if both playback_only / capture_only were true.
Thus, graph_util_parse_link_direction() which setup playback_only /
capture_only don't need to check it.
And, its return value is not used on existing driver. Let's remove it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://msgid.link/r/87a5kah6gm.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
'cx2072x_eq_ctrl' has been unused since the original
commit a497a43637 ("ASoC: Add support for Conexant CX2072X CODEC").
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Link: https://msgid.link/r/20240601225446.183505-4-linux@treblig.org
Signed-off-by: Mark Brown <broonie@kernel.org>
'wm0010_spi_msg' has been unused since the original
commit e3523e0186 ("ASoC: wm0010: Add initial wm0010 DSP driver").
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://msgid.link/r/20240601225446.183505-3-linux@treblig.org
Signed-off-by: Mark Brown <broonie@kernel.org>
'rx_macro_reg_mask_val' is unused since the original
commit af3d54b997 ("ASoC: codecs: lpass-rx-macro: add support for
lpass rx macro").
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Link: https://msgid.link/r/20240601225446.183505-2-linux@treblig.org
Signed-off-by: Mark Brown <broonie@kernel.org>
make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in sound/soc/fsl/imx-pcm-dma.o
Add the missing invocation of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://msgid.link/r/20240602-md-snd-fsl-imx-pcm-dma-v1-1-e7efc33c6bf3@quicinc.com
Signed-off-by: Mark Brown <broonie@kernel.org>
make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in sound/soc/mxs/snd-soc-mxs-pcm.o
Add the missing invocation of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://msgid.link/r/20240602-md-snd-soc-mxs-pcm-v1-1-1e663d11328d@quicinc.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We just return 0 after the skip_tlv label. No need to use a label.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://msgid.link/r/20240603073224.14726-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
sof_ipc4_dma_config_tlv{} is for Audio DSP firmware only.
Don't set it in dspless mode.
Fixes: 17386cb1b4 ("ASoC: SOF: Intel: hda-dai: set dma_stream_channel_map device")
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://msgid.link/r/20240603073224.14726-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmZc9egeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGoLsH/0xo1TNZwNRE9Qux
gFbJDDhxMtvWnJCSqUuhpypd7SoVVEVKiXW942gWTl97PlCEH0ov3p+0UbxnmG13
kKJT1C/gct95L03OAfGquIjBSWh4/55o6Vz1zYTGvTFpWZo7G3ZvCDY8o9kN5/L3
mnpC+GfzZ9ckg+2TfwlbGBQUtILHV3IipCbfDFPSrT8mS0IT67uvBlND3nI++woj
J1znGqg1PQ6yFnFCfj4RYCiyv/jEAT0ZTyokO4rH+iQVufc3y02mokhMuqmSoE6T
5bbHToLZIaa/QjRamN/+ltwyrhv8WlX4rJOkMibJY6w8gpukt/k6gL2Pguk4y2pf
0FPbbC0=
=0AGs
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmZdrNMACgkQJNaLcl1U
h9BKWQf/ctbyu0m+OEoNUAsP3rJpeauZEpDplmcSnUTKFYoV1rh2YXOME3kJPYMA
fIfbGouz64mIHTustpDlsLuqS8f/shFXdWMOEpfaBvt3SPcns1JZT+I+ecQxQAYJ
xGgxpcJnD+lVJa8a8OwFeej7lcDZATgUGZxrhcqnVGRfXopRyxr+G8fL+cek+4EY
L0LkAAjQcmqEaO4ihhfKtssC8I7bGxrhlbmAK/AuU34szVGSee+ldbqNrgicM25U
sERruhz/7rknE1xYwOsVsg/ikeeS1FHjghRGYEqdxDk2CrLZoNjyi5Fukq/QujID
KcinNHzTT4m+ERCl+98VQKyw5u4Z2Q==
=0F9i
-----END PGP SIGNATURE-----
ASoC: Merge up fixes
We need this to get the i.MX platforms working in CI again.
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:
The existing logic to pick a DMIC blob is based on several historical
assumptions that the NHLT in BIOS always contains 32-bits per sample
type (first patch, [1]).
The other issue with the existing logic is that it was designed to care only
about the bit depth of the format and fails to find the existing and correct
blob when rate/channels are different on the FE side compared to what we should
be using on the DAI side (we have components in path which can change
rate/channel count).
These issues have not been observed in past but with new MTL based (Windows)
laptops and new topologies to enhance the audio quality, we started to see weird
issues around how our assumptions of vendors failed.
Since some NHLT blob handling cleanup has been done for 6.10, this series will
complete that work to cover even cases that we don't anticipate to see.
[1] https://github.com/thesofproject/linux/issues/4973
Currently we only check the bit depth value among to DAI formats, but other
parameters might be constant, like number of channels and/or rate.
In capture we use the fe params as a reference to find the format and blob
which should be used, but in the path we can have components which can
handle expanding/narrowing number of channels or do a resample.
In these cases the topology is expected to have 'fixed' parameter for
channels/rates/bit depth and the conversion to the fe format is going to
be done within the path.
In practice this patch fixes issues like:
All DMIC formats are fixed four channels
We have a component which converts the four channel to stereo
FE is opened with 2 channel
Even if we have the correct bit depth format and blob (for four channel) we
will still be looking for stereo configurations, which will fail.
Note: the adjustment of params have switched order with the checking of
single bit depth (needed for the NHLT blob fallback support). This change
is non function, just that if the sof_ipc4_narrow_params_to_format() would
fail, there is no point of checking the single bit depth.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://msgid.link/r/20240530111918.21974-6-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Remove the duplicated code paths to check for single bit depth and to
update the params with storing the parameters needed by the function and
have a single code section.
No functional change but the code is easier to follow.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://msgid.link/r/20240530111918.21974-5-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Rename the sof_ipc4_copier_is_single_format() to
sof_ipc4_copier_is_single_bitdepth() to clear the confusion of the use of
'format' when we are querying information on the bit depth.
Format is used to describe a combination of parameters (rate, channels,
sample format / bit depth).
Rename the flags used to store the result at the same time.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://msgid.link/r/20240530111918.21974-4-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Print out the number of channels for the format explicitly instead of
having the reader to understand how to interpret the ch_map and ch_cfg
values.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://msgid.link/r/20240530111918.21974-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The ACPI NHLT table always had 32-bit DMIC blob even if 16-bit was also
present and taken as a 'rule' which obviously got broken and there is at
least one device on the market which ships with only 16-bit DMIC
configuration blob.
This corner case has never been supported and it is going to need topology
updates for DMIC copier to support multiple formats.
As for the kernel side: if the copier supports multiple formats and the
preferred 32-bit DMIC blob is not found then we will try to get a 16-bit
DMIC configuration and look for a 16-bit copier config.
Fixes: f9209644ae ("ASoC: SOF: ipc4-topology: Correct DAI copier config and NHLT blob request")
Link: https://github.com/thesofproject/linux/issues/4973
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://msgid.link/r/20240530111918.21974-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
New CPU #defines encode vendor and family as well as model.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://msgid.link/r/20240529191450.63414-1-tony.luck@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Artur Weber <aweber.kernel@gmail.com>:
Many of Samsung's Exynos 4 devices share the same midas-audio driver
to handle the codec setup. While most of these devices, including the
Midas itself, use the jack detection provided by the WM8994 driver,
other devices such as the Samsung Galaxy Tab 3 8.0 (lt01) use two GPIOs
and an ADC channel to determine jack insertion, the jack's type, and
button presses (for headsets with volume up/down/play buttons).
In the downstream kernel, this behavior is implemented in the sec-jack
driver[1], and the per-device settings are configured in *-jack.c files
in the mach folder (see e.g. the Tab 3's implementation[2]).
This patchset implements this mechanism in the midas_wm1811.c driver,
and adds new DTS options to allow for its configuration. It also
enables jack detection for the Samsung Galaxy Tab 3 8.0.
A very similar mechanism was already present in the aries_wm8994.c
driver[3]; this implementation heavily borrows from it, though there
are a few extra cleanups as well.
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:
'make W=1' now reports missing MODULE_DESCRIPTION lines. This patchset
cleans-up all the module definitions and adds MODULE_DESCRIPTION lines
as needed.
Merge series from Matteo Martelli <matteomartelli3@gmail.com>:
This patch set adds support for the Everest-semi ES8311 codec.
Everest-semi ES8311 codec is a low-power mono audio codec with I2S audio
interface and I2C control.
Implemented and tested most of the codec features, with few limitations
listed in the driver commit message. The test setup was composed of a
ESP32-LyraT-Mini board, which embeds the codec, connected via I2C and
I2S to a Raspberry Pi Zero W host board. Some tests were also performed
on a Pine64 A64 host board (e.g. to test the suspend/resume not
supported by the rpi). The codec driver was bound with the simple-card
driver running on kernel v6.9-rc7.
Merge series from Shengjiu Wang <shengjiu.wang@nxp.com>:
There are two MQS instances on the i.MX95 platform.
The definition of bit positions in the control register are
different. In order to support these MQS modules, define
two compatible strings to distinguish them.
Merge series from Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>:
X1E80100 CRD is the first board, which comes with four speakers, so we
still keep fixing and adding missing pieces.
The board has speaker arranged as left front+back and then right
front+back. Using default channel mapping causes front right speaker to
play left back stream.
Adjust the channel maps for frontend DAIs to fix stereo and four-channel
playback.
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:
More simplifications from Brent Lu for Chromebooks, Bard Liao for
SoundWire, and support for new Dell SKUs w/ Cirrus Logic codecs added
by Charles Keepax.
Merge series from Sameer Pujar <spujar@nvidia.com>:
The AHUB HW modules are interconnected with CIF which are capable of
supporting Channel and Sample bit format conversion. Due to this, the
I2S Client can have different Channel and Sample bit from the hw_params()
and this config is passed from CIF port of I2S DT node which can help to
perform this conversion.
- First change to split simple_fixup_sample_fmt to support returning
sample format value
- Second patch to support Tegra I2S client channel and sample format
programming based on CIF port from DT node.
Some Samsung devices that use the midas_wm1811 driver use a GPIO-based
method for detecting whether the headset jack is plugged in, as well as
detecting which headset buttons are pressed. There are two GPIOs:
a "headset detect" GPIO responsible for detecting jack insertion, and
a "headset key" GPIO which triggers when a button on the headset is
pressed. The plug type and the button pressed are determined based
on information from an ADC channel. The headset mic is enabled by a
headset mic bias regulator.
Add support for the GPIO-based headset jack detection mechanism,
and make it configurable from the device tree.
This implementation borrows somewhat from the aries_wm8994.c driver,
though there are a few changes to make the code cleaner, and to add
support for DT-based configuration.
Notably, a dependency on IIO is introduced, to accommodate the ADC
reading requirement.
Signed-off-by: Artur Weber <aweber.kernel@gmail.com>
Link: https://msgid.link/r/20240525-midas-wm1811-gpio-jack-v4-5-f488e03bd8c7@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Some devices use a headset mic bias supply (sometimes referred to as
"ear mic bias") to enable/disable the headset mic.
Add a REGULATOR_SUPPLY widget for this supply which gets the headset-
mic-bias supply and is routed to the Headset Mic switch similar to how
it's done for the other mic bias regulators.
Signed-off-by: Artur Weber <aweber.kernel@gmail.com>
Link: https://msgid.link/r/20240525-midas-wm1811-gpio-jack-v4-4-f488e03bd8c7@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Instead of using a custom function with the SND_SOC_DAPM_MIC widget,
split out the main mic/sub mic bias regulators into a separate widget
using SND_SOC_DAPM_REGULATOR_SUPPLY, and connect them via a routing.
Signed-off-by: Artur Weber <aweber.kernel@gmail.com>
Link: https://msgid.link/r/20240525-midas-wm1811-gpio-jack-v4-3-f488e03bd8c7@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
If a process module does not have base config extension then the same
format applies to all of it's inputs and the process->base_config_ext is
NULL, causing NULL dereference when specifically crafted topology and
sequences used.
Fixes: 648fea1284 ("ASoC: SOF: ipc4-topology: set copier output format for process module")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Cc: stable@vger.kernel.org
Link: https://msgid.link/r/20240529121201.14687-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
With the deferred probe mechanism used by the gfx/display subsystem,
we see this message repeated for no good reason. Print the information
only once.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://msgid.link/r/20240527193936.165702-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Commit 94d2d08974 ("ASoC: Intel: Boards: tgl_max98373: add dai_trigger
function") disables speaker pins in late_probe to allow DSP to enter
low power state. Add same code to sof_da7219 driver.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240527193552.165567-19-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Since maxim-module could detect tdm slot number in runtime, we could
remove local ops and use maxim-module to handle max98373.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240527193552.165567-18-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Rewrite max_98373_hw_params() function to get tdm slot number from
topology in runtime because earlier platforms use 4-slot setting
instead of 8. Also check if the interface is configured in TDM mode
before calling snd_soc_dai_set_tdm_slot() function.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240527193552.165567-17-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Support the new parameter type SOF_DAI_PARAM_INTEL_SSP_TDM_SLOTS in
sof_ipc4_dai_get_param() function to get the tdm slot number of
specific SSP port.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240527193552.165567-16-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Support the new parameter type SOF_DAI_PARAM_INTEL_SSP_TDM_SLOTS in
sof_ipc3_dai_get_param() function to get the tdm slot number of
specific SSP port.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240527193552.165567-15-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
An new interface, sof_dai_get_tdm_slots(), is added for machine driver
to get tdm slot number from topology. The dai_get_param() callback
needs to support new parameter type SOF_DAI_PARAM_INTEL_SSP_TDM_SLOTS
by returning the tdm slot number of specific SSP port.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240527193552.165567-14-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We are going to extend the dai_get_clk() callback function to retrieve
other dai-specific settings like tdm slot number, not just mclk/bclk
frequencies. Revisit functions and macros related to the callback and
replace the string 'clk' with 'param' to reflect the ongoing change.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240527193552.165567-13-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add quirks for some new Dell laptops using Cirrus amplifiers in a bridge
configuration.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240527193552.165567-11-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add some new match table entries on Arrowlake and Raptorlake for some
coming cs42l43 laptops.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240527193552.165567-10-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
No reason for cs42l43 and cs35l56 not to offer pin switch controls for
the headphones and speakers, add these controls.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240527193552.165567-9-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
get_codec_dai_by_name() is not used anymore. Remove it.
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240527193552.165567-8-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The dai is passed from the parameter. We don't need to find the dai
by name.
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240527193552.165567-7-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The dai is passed from the parameter. We don't need to find the dai
by name.
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240527193552.165567-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The dai is passed from the parameter. We don't need to find the dai
by name.
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240527193552.165567-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The dai is passed from the parameter. We don't need to find the dai
by name.
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240527193552.165567-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The dai is passed from the parameter. We don't need to find the dai
by name.
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240527193552.165567-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The dai is passed from the parameter. We don't need to find the dai
by name.
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240527193552.165567-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There are two MQS instances on the i.MX95 platform.
The definition of bit positions in the control register are
different. In order to support these MQS modules, define
two compatible strings to distinguish them.
Define different soc data according to compatible strings
On i.MX95 one instance in nect-mix is supported by this
commit, another instance in always-on-mix is not supported,
which depends on System Manager function readiness.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://msgid.link/r/1716347305-18457-3-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
MODULE_DESCRIPTION() was optional until it became mandatory and
flagged as an error by 'make W=1'.
Reported-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://msgid.link/r/20240527194414.166156-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Follow the arbitrary Intel convention order to allow for easier grep.
MODULE_LICENSE
MODULE_DESCRIPTION
MODULE_IMPORT
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://msgid.link/r/20240527194414.166156-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The module information is spread across files, group in a single
location. For maintenability and alignment, the arbitrary Intel
convention is used with the following order:
MODULE_LICENSE
MODULE_DESCRIPTION
MODULE_IMPORT
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://msgid.link/r/20240527194414.166156-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This file is part of the snd-sof module, there's no reason to re-add the
MODULE_LICENSE here.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://msgid.link/r/20240527194414.166156-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The AHUB HW modules are interconnected with CIF which are capable of
supporting Channel and Sample bit format conversion. Due to this, the
I2S Client can have different Channel and Sample bit from the hw_params()
and this config is passed from CIF port of I2S DT node which can help to
perform this conversion.
For e.g. HFP usecase consists of BT SCO with 1ch and 8k audio data
which needs to be converted and mixed with external codec playback and
capture path which is of 2ch and 48k format.
For HFP Playback:
The path includes mono to stereo and 8k to 48k conversion
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
| |1ch | | 1ch | |2ch | SFC | 2ch | |
|BT SCO |---->| I2Sx |------>| CIF |----->| 8k->48k |---->| Codec I2Sy|
|_ _ _ _| |_ _ __|client |_ _ _|audio |_ _ _ _ _| |_ _ _ _ _ _|
For HFP Capture:
The path includes stereo to mono and 48k to 8k conversion
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
| | 2ch | SFC | 2ch | | 1ch | | 1ch | |
| codec I2Sy|---->| 48k->8k |----->| CIF |------>| I2Sx |---->| BT SCO|
|_ _ _ _ _ _| |_ _ _ _ _| audio|_ _ _|client |_ _ _ _| |_ _ _ _|
For above two path, I2S client channel uses existing DT binding to pass
channels and format conversion in I2Sx CIF Port.
Signed-off-by: Mohan Kumar <mkumard@nvidia.com>
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Link: https://msgid.link/r/20240527125608.2461300-3-spujar@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Split the simple_fixup_sample_fmt() into two functions by adding
one more function named simple_util_get_sample_fmt() to return
the sample format value.
This is useful for drivers that wish to simply get the sample format
without setting the mask.
Signed-off-by: Mohan Kumar <mkumard@nvidia.com>
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Link: https://msgid.link/r/20240527125608.2461300-2-spujar@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The SoundWire interface can always support 44.1kHz using flow controlled
mode, and whether the ASP is in master mode should obviously only affect
the ASP. Update cs42l43_startup() to only restrict the rates for the ASP
DAI.
Fixes: fc918cbe87 ("ASoC: cs42l43: Add support for the cs42l43")
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://msgid.link/r/20240527100840.439832-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Constifying "struct snd_soc_ops" moves some data to a read-only section, so
increase overall security.
This structure is also part of scripts/const_structs.checkpatch.
As an example, on a x86_64, with allmodconfig:
Before:
text data bss dec hex filename
6315 3696 0 10011 271b sound/soc/intel/boards/ehl_rt5660.o
After:
text data bss dec hex filename
6379 3648 0 10027 272b sound/soc/intel/boards/ehl_rt5660.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://msgid.link/r/2f0613bf4c6018569cdaac876d0589e49cf38a80.1715622793.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Mark Brown <broonie@kernel.org>
Replace SET_RUNTIME_PM_OPS() with its modern alternative RUNTIME_PM_OPS().
The combined usage of pm_ptr() and RUNTIME_PM_OPS() allows the
compiler to evaluate if the runtime suspend/resume() functions are used
at build time or are simply dead code.
This allows removing the __maybe_unused notation from the runtime
suspend/resume() functions.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Link: https://msgid.link/r/20240507173735.3456334-3-festevam@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Replace SET_RUNTIME_PM_OPS() with its modern alternative RUNTIME_PM_OPS().
The combined usage of pm_ptr() and RUNTIME_PM_OPS() allows the
compiler to evaluate if the runtime suspend/resume() functions are used
at build time or are simply dead code.
This allows removing the __maybe_unused notation from the runtime
suspend/resume() functions.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Link: https://msgid.link/r/20240507173735.3456334-2-festevam@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Replace SET_RUNTIME_PM_OPS() with its modern alternative RUNTIME_PM_OPS().
The combined usage of pm_ptr() and RUNTIME_PM_OPS() allows the
compiler to evaluate if the runtime suspend/resume() functions are used
at build time or are simply dead code.
This allows removing the __maybe_unused notation from the runtime
suspend/resume() functions.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Link: https://msgid.link/r/20240507173735.3456334-1-festevam@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Constifying "struct snd_soc_tplg_ops" moves some data to a read-only
section, so increase overall security.
On a x86_64, with allmodconfig:
Before:
text data bss dec hex filename
44519 2888 48 47455 b95f sound/soc/sof/topology.o
After:
text data bss dec hex filename
44839 2552 48 47439 b94f sound/soc/sof/topology.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://msgid.link/r/2d9f5b75e979eb38b6f3baf85dfa1f0fdb3447ef.1715526069.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Mark Brown <broonie@kernel.org>
Constifying "struct snd_soc_tplg_ops" moves some data to a read-only
section, so increase overall security.
On a x86_64, with allmodconfig:
Before:
text data bss dec hex filename
58844 5282 56 64182 fab6 sound/soc/intel/skylake/skl-topology.o
After:
text data bss dec hex filename
59004 5122 56 64182 fab6 sound/soc/intel/skylake/skl-topology.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://msgid.link/r/48f096b6dc617ecf3ca53211c2a696a4df33b21a.1715526069.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Mark Brown <broonie@kernel.org>
Constifying "struct snd_soc_tplg_ops" moves some data to a read-only
section, so increase overall security.
On a x86_64, with allmodconfig:
Before:
text data bss dec hex filename
19942 832 0 20774 5126 sound/soc/qcom/qdsp6/topology.o
After:
text data bss dec hex filename
20102 652 0 20754 5112 sound/soc/qcom/qdsp6/topology.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://msgid.link/r/a5ae843dd8aaacbc1148aea7a3b1d03f11495872.1715526069.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Mark Brown <broonie@kernel.org>
Constifying "struct snd_soc_tplg_ops" moves some data to a read-only
section, so increase overall security.
On a x86_64, with allmodconfig:
Before:
text data bss dec hex filename
28046 794 0 28840 70a8 sound/soc/intel/avs/topology.o
After:
text data bss dec hex filename
28206 614 0 28820 7094 sound/soc/intel/avs/topology.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://msgid.link/r/01de0157088de0475970c79738284d6c86d702fe.1715526069.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_soc_tplg_component_load() does not modify its "*ops" argument. It
only read some values and stores it in "soc_tplg.ops".
This argument and the ops field in "struct soc_tplg" can be made const.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://msgid.link/r/f2f983e791d7f941a95556bb147f426a345d84d4.1715526069.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Mark Brown <broonie@kernel.org>
The ACPI NHLT table always had 32-bit DMIC blob even if 16-bit was also
present and taken as a 'rule' which obviously got broken and there is at
least one device on the market which ships with only 16-bit DMIC
configuration blob.
This corner case has never been supported and it is going to need topology
updates for DMIC copier to support multiple formats.
As for the kernel side: if the copier supports multiple formats and the
preferred 32-bit DMIC blob is not found then we will try to get a 16-bit
DMIC configuration and look for a 16-bit copier config.
Fixes: f9209644ae ("ASoC: SOF: ipc4-topology: Correct DAI copier config and NHLT blob request")
Link: https://github.com/thesofproject/linux/issues/4973
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://msgid.link/r/20240516075611.18018-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Correct white-space issues and drop unused
WCD939X_MBHC_IS_SECOND_RAMP_REQUIRED() define. No functional impact.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://msgid.link/r/20240523104228.36263-4-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
All four microphone bias registers have similar layout: enable mask is
exactly the same. Use one define, just like older driver wcd938x is
doing, to make the code a bit simpler.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://msgid.link/r/20240523104228.36263-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
There is a define for MIC bias registers enable mask called
WCD938X_MICB_EN_MASK, which is already used to handle all four MIC1-4
biases in wcd938x_mbhc_micb_adjust_voltage().
Use the same define also in wcd938x_mbhc_micb_en_status() for MIC2 to
have unified, simpler approach.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://msgid.link/r/20240523104228.36263-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
All MIC1-4 bias registers are the same and the header already defines
register fields for them. Drop unused, duplicated defines for MIC2
bias enable register.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://msgid.link/r/20240523104228.36263-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
This is the initial amplifier driver for rt1320.
--
add class id 1
Signed-off-by: Shuming Fan <shumingf@realtek.com>
v2: add Capture DAI for AEC feedback
v3: add some comments for blind writes/patch_code/calling sdw_slave_read_prop
v4: add comments for different class id
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240521084625.453554-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
X1E80100 CRD board comes with four speakers arranged as left front+back
and then right front+back. Using default channel mapping causes front
right speaker to play left back stream.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://msgid.link/r/20240520-asoc-x1e80100-4-channel-mapping-v4-4-f657159b4aad@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
When constructing packets to DSP, the Audioreach code uses 'struct
audioreach_module_config' to configure parameters like number of
channels, bitrate, sample rate etc, but uses defaults for the channel
mapping.
Rework this code to copy the channel mapping from 'struct
audioreach_module_config', instead of using the default. This requires
all callers to fill that structure: add missing initialization of
channel mapping.
Entire patch makes code more logical and easier to follow:
1. q6apm-dai and q6apm-lpass-dais code which allocates 'struct
audioreach_module_config' initializes it fully, so fills both
the number of channels and the channel mapping.
2. Audioreach code, which uses 'struct audioreach_module_config' when
constructing packets, copies entire contents of passed config, not
only pieces of it.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://msgid.link/r/20240520-asoc-x1e80100-4-channel-mapping-v4-3-f657159b4aad@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The set_channel_map() implementation in q6apm-lpass-dais driver was
copying older pre-Audioreach code from q6afe-dai driver, but not really
using it. The code sets active channel mask based on passed channel
mapping, but Audioreach code does not use that mask ever. Audioreach
module configuration does have on the other hand proper channel mapping
field, which should supersed that active channel mask.
Drop the unused active channel mask and implement proper mapping of
channels in q6apm-lpass-dais driver.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://msgid.link/r/20240520-asoc-x1e80100-4-channel-mapping-v4-2-f657159b4aad@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
There is no need for implementations of DAI set_channel_map() to modify
contents of passed arrays with actual channel mapping. Additionally,
the caller keeps full ownership of the array.
Constify these pointer arguments so the code will be safer and easier to
read (documenting the caller's ownership).
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://msgid.link/r/20240520-asoc-x1e80100-4-channel-mapping-v4-1-f657159b4aad@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support for the Everest-semi ES8311 codec.
Everest-semi ES8311 codec is a low-power mono audio codec with I2S audio
interface and I2C control.
Supported features:
* Both master and slave mode. Master clock is optional in slave mode.
* Sample rates from 8KHz to 96KHz.
* Sample formats: S16_LE, S18_3LE, S20_3LE, S24_3LE, S24_LE and S32_LE.
* I2S formats: I2S, LEFT_J, DSP_A, DSP_B.
* BCLK and FSYNC clocks inversion.
* Component suspend/resume.
* ADC, PGA, DAC controls.
* ADC DSP controls: volume, fade (ramp rate), ALC, automute, HPF, EQ.
* DAC DSP controls: volume, fade (ramp rate), DRC, EQ.
* DAPM routes: capture path with input source selection (differential
MIC/DMIC) and AIF channel source selection; playback path with DAC
channel source selection.
Limitations:
* Support only for master clocks with a ratio of ADC (or DAC) clock to
LRCLK equal to 256. This to keep the default ADC and DAC oversampling
and ADC scale settings. Anyway all 8-96KHz sample rates are supported
when the ratio of MCLK to sample rate is 32, 64, 128, 256, 384 or 512
(upper limit due to max MCLK freq of 49.2MHz).
* Coefficients for ADC HPF and ADC/DAC EQ not supported.
* Digital mic supported but not tested.
* S18_3LE, S20_3LE and S24_3LE formats supported but not tested.
Signed-off-by: Matteo Martelli <matteomartelli3@gmail.com>
Link: https://msgid.link/r/20240522164722.954656-3-matteomartelli3@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
A collection of small fixes for 6.10-rc1. Most of changes are
various device-specific fixes and quirks, while there are a few small
changes in ALSA core timer and module / built-in fixes.
-----BEGIN PGP SIGNATURE-----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=VeU/
-----END PGP SIGNATURE-----
Merge tag 'sound-fix-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of small fixes for 6.10-rc1. Most of changes are various
device-specific fixes and quirks, while there are a few small changes
in ALSA core timer and module / built-in fixes"
* tag 'sound-fix-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda/realtek: fix mute/micmute LEDs don't work for ProBook 440/460 G11.
ALSA: core: Enable proc module when CONFIG_MODULES=y
ALSA: core: Fix NULL module pointer assignment at card init
ALSA: hda/realtek: Enable headset mic of JP-IK LEAP W502 with ALC897
ASoC: dt-bindings: stm32: Ensure compatible pattern matches whole string
ASoC: tas2781: Fix wrong loading calibrated data sequence
ASoC: tas2552: Add TX path for capturing AUDIO-OUT data
ALSA: usb-audio: Fix for sampling rates support for Mbox3
Documentation: sound: Fix trailing whitespaces
ALSA: timer: Set lower bound of start tick time
ASoC: codecs: ES8326: solve hp and button detect issue
ASoC: rt5645: mic-in detection threshold modification
ASoC: Intel: sof_sdw_rt_sdca_jack_common: Use name_prefix for `-sdca` detection
A bunch of fixes that came in during the merge window, all driver
specific and none of them especially remarkable.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmZPJ10ACgkQJNaLcl1U
h9AN7wf/bR1oUfxqVRkkeWDJrKevWsXNN5LlWXar8D/yBzGp9ZzlliGKdm58O+7j
G0iPkMGT0tD5oSxEXVWoYSRLwq8c+jvW5nNiNXPAITeSzXnW4LwSnfUNs52dAmAN
MnNqzhSJbsXYH8JH5/JEco5seKC5/ijOOqIxcAhwrrdYnpjPkFXtlU4TQvSZeY7w
i7BeEO1NmvYrgxT1oT+Nm8PFYANsyf9hCgANuZQv5p9iHvjsPzIC2LuW0exy7oiC
k6X8uWiy+ETK3a9p288QZfO9AFrYm9KX3L18ha/C21ljw7DMv5xbgWm5xWnJQGsV
n59T+C5kM0V5luSjXZxQ2/hE1Ueu1Q==
=lhUd
-----END PGP SIGNATURE-----
Merge tag 'asoc-fix-v6.10-merge-window' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.10
A bunch of fixes that came in during the merge window, all driver
specific and none of them especially remarkable.
With the rework of how the __string() handles dynamic strings where it
saves off the source string in field in the helper structure[1], the
assignment of that value to the trace event field is stored in the helper
value and does not need to be passed in again.
This means that with:
__string(field, mystring)
Which use to be assigned with __assign_str(field, mystring), no longer
needs the second parameter and it is unused. With this, __assign_str()
will now only get a single parameter.
There's over 700 users of __assign_str() and because coccinelle does not
handle the TRACE_EVENT() macro I ended up using the following sed script:
git grep -l __assign_str | while read a ; do
sed -e 's/\(__assign_str([^,]*[^ ,]\) *,[^;]*/\1)/' $a > /tmp/test-file;
mv /tmp/test-file $a;
done
I then searched for __assign_str() that did not end with ';' as those
were multi line assignments that the sed script above would fail to catch.
Note, the same updates will need to be done for:
__assign_str_len()
__assign_rel_str()
__assign_rel_str_len()
I tested this with both an allmodconfig and an allyesconfig (build only for both).
[1] https://lore.kernel.org/linux-trace-kernel/20240222211442.634192653@goodmis.org/
Link: https://lore.kernel.org/linux-trace-kernel/20240516133454.681ba6a0@rorschach.local.home
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Julia Lawall <Julia.Lawall@inria.fr>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Christian König <christian.koenig@amd.com> for the amdgpu parts.
Acked-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> #for
Acked-by: Rafael J. Wysocki <rafael@kernel.org> # for thermal
Acked-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Darrick J. Wong <djwong@kernel.org> # xfs
Tested-by: Guenter Roeck <linux@roeck-us.net>
- cleanup and conversion for soundwire sysfs groups
- intel support for ace2x bits, auxdevice pm improvements
- qcom multi link device support
-----BEGIN PGP SIGNATURE-----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=H/AJ
-----END PGP SIGNATURE-----
Merge tag 'soundwire-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire
Pull soundwire updates from Vinod Koul:
- cleanup and conversion for soundwire sysfs groups
- intel support for ace2x bits, auxdevice pm improvements
- qcom multi link device support
* tag 'soundwire-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire: (33 commits)
soundwire: intel_ace2.x: add support for DOAISE property
soundwire: intel_ace2.x: add support for DODSE property
soundwire: intel_ace2x: use DOAIS and DODS settings from firmware
soundwire: intel_ace2x: cleanup DOAIS/DODS settings
soundwire: intel_ace2x: simplify check_wake()
soundwire: intel_ace2x: fix wakeup handling
soundwire: intel_init: resume all devices on exit.
soundwire: intel: export intel_resume_child_device
soundwire: intel_auxdevice: use pm_runtime_resume() instead of pm_request_resume()
ASoC: SOF: Intel: hda: disable SoundWire interrupt later
soundwire: qcom: allow multi-link on newer devices
soundwire: intel_ace2x: use legacy formula for intel_alh_id
soundwire: reconcile dp0_prop and dpn_prop
soundwire: intel_ace2x: set the clock source
soundwire: intel_ace2.x: power-up first before setting SYNCPRD
soundwire: intel_ace2x: move and extend clock selection
soundwire: intel: add support for MeteorLake additional clocks
soundwire: intel: add more values for SYNCPRD
soundwire: bus: extend base clock checks to 96 MHz
soundwire: cadence: show the bus frequency and frame shape
...
-----BEGIN PGP SIGNATURE-----
iQJIBAABCgAyFiEEgMe7l+5h9hnxdsnuWYigwDrT+vwFAmZLzNIUHGJoZWxnYWFz
QGdvb2dsZS5jb20ACgkQWYigwDrT+vwr/Q//STe2XGKI8bAKqP2wbbkzm+ISnK4A
Lqf3FEAIXunxDRspszfXKKV2p4vaIkmOFiwIdtp/kWvd0DQn5+ATXJ/iQtp8aFX/
R+6BQ7EZc2G7fN5fbQuK54+CvmWEpkKEMbXYbd6ivQ14Cijdb3Nbu+w+DYFjS+6C
k2a9lS1bTW7Xcy0fyiO1w6GQiWqtmOH8U3OlQtIrI0EVkDG9OG1LsLuc92/FgkOo
REN+sU+hX1K5fHrvm2CtjYDn/9/B6bJ/It22H1dPgUL9nKvKC67fYzosMtUCOX1M
6XSPjZIuXOmQGeZXHhpSlVwaidxoUjYO98I7nMquxKdCy6yct3geK7ULG/xeQCgD
ML7MGQB4+sTiSWalXUQaziKqF1FIDEvU3HMGXFWnoBL5l56eRp8KS1EI9Eqk9pU3
pk9fJaCkcFnkzPtMFzqPOm5q9zUZ6bGbfYb0hs72TUKplmVDhFo2T1YsW2AOyHZ7
mjuDzUYZX0H7uM1tntA56IgZX+oNOrLvhBt5L5M/BQeCsZFBBUfIcAEaYoL9LwXO
AYgIG3jdqzHHyAUzutJF+XHKinJLMHm0XVYbFmO6saPhFzrUJSNHqT7NzW1DGGTl
OnO8e1WNMX1EcnKvnc6fXyGmM3SgVwy45FsbG/zRnhn4uBKqKtjrh6uX/myA22LK
CSeqSUK9XmXxFNA=
=xjoS
-----END PGP SIGNATURE-----
Merge tag 'pci-v6.10-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Skip E820 checks for MCFG ECAM regions for new (2016+) machines,
since there's no requirement to describe them in E820 and some
platforms require ECAM to work (Bjorn Helgaas)
- Rename PCI_IRQ_LEGACY to PCI_IRQ_INTX to be more specific (Damien
Le Moal)
- Remove last user and pci_enable_device_io() (Heiner Kallweit)
- Wait for Link Training==0 to avoid possible race (Ilpo Järvinen)
- Skip waiting for devices that have been disconnected while
suspended (Ilpo Järvinen)
- Clear Secondary Status errors after enumeration since Master Aborts
and Unsupported Request errors are an expected part of enumeration
(Vidya Sagar)
MSI:
- Remove unused IMS (Interrupt Message Store) support (Bjorn Helgaas)
Error handling:
- Mask Genesys GL975x SD host controller Replay Timer Timeout
correctable errors caused by a hardware defect; the errors cause
interrupts that prevent system suspend (Kai-Heng Feng)
- Fix EDR-related _DSM support, which previously evaluated revision 5
but assumed revision 6 behavior (Kuppuswamy Sathyanarayanan)
ASPM:
- Simplify link state definitions and mask calculation (Ilpo
Järvinen)
Power management:
- Avoid D3cold for HP Pavilion 17 PC/1972 PCIe Ports, where BIOS
apparently doesn't know how to put them back in D0 (Mario
Limonciello)
CXL:
- Support resetting CXL devices; special handling required because
CXL Ports mask Secondary Bus Reset by default (Dave Jiang)
DOE:
- Support DOE Discovery Version 2 (Alexey Kardashevskiy)
Endpoint framework:
- Set endpoint BAR to be 64-bit if the driver says that's all the
device supports, in addition to doing so if the size is >2GB
(Niklas Cassel)
- Simplify endpoint BAR allocation and setting interfaces (Niklas
Cassel)
Cadence PCIe controller driver:
- Drop DT binding redundant msi-parent and pci-bus.yaml (Krzysztof
Kozlowski)
Cadence PCIe endpoint driver:
- Configure endpoint BARs to be 64-bit based on the BAR type, not the
BAR value (Niklas Cassel)
Freescale Layerscape PCIe controller driver:
- Convert DT binding to YAML (Frank Li)
MediaTek MT7621 PCIe controller driver:
- Add DT binding missing 'reg' property for child Root Ports
(Krzysztof Kozlowski)
- Fix theoretical string truncation in PHY name (Sergio Paracuellos)
NVIDIA Tegra194 PCIe controller driver:
- Return success for endpoint probe instead of falling through to the
failure path (Vidya Sagar)
Renesas R-Car PCIe controller driver:
- Add DT binding missing IOMMU properties (Geert Uytterhoeven)
- Add DT binding R-Car V4H compatible for host and endpoint mode
(Yoshihiro Shimoda)
Rockchip PCIe controller driver:
- Configure endpoint BARs to be 64-bit based on the BAR type, not the
BAR value (Niklas Cassel)
- Add DT binding missing maxItems to ep-gpios (Krzysztof Kozlowski)
- Set the Subsystem Vendor ID, which was previously zero because it
was masked incorrectly (Rick Wertenbroek)
Synopsys DesignWare PCIe controller driver:
- Restructure DBI register access to accommodate devices where this
requires Refclk to be active (Manivannan Sadhasivam)
- Remove the deinit() callback, which was only need by the
pcie-rcar-gen4, and do it directly in that driver (Manivannan
Sadhasivam)
- Add dw_pcie_ep_cleanup() so drivers that support PERST# can clean
up things like eDMA (Manivannan Sadhasivam)
- Rename dw_pcie_ep_exit() to dw_pcie_ep_deinit() to make it parallel
to dw_pcie_ep_init() (Manivannan Sadhasivam)
- Rename dw_pcie_ep_init_complete() to dw_pcie_ep_init_registers() to
reflect the actual functionality (Manivannan Sadhasivam)
- Call dw_pcie_ep_init_registers() directly from all the glue
drivers, not just those that require active Refclk from the host
(Manivannan Sadhasivam)
- Remove the "core_init_notifier" flag, which was an obscure way for
glue drivers to indicate that they depend on Refclk from the host
(Manivannan Sadhasivam)
TI J721E PCIe driver:
- Add DT binding J784S4 SoC Device ID (Siddharth Vadapalli)
- Add DT binding J722S SoC support (Siddharth Vadapalli)
TI Keystone PCIe controller driver:
- Add DT binding missing num-viewport, phys and phy-name properties
(Jan Kiszka)
Miscellaneous:
- Constify and annotate with __ro_after_init (Heiner Kallweit)
- Convert DT bindings to YAML (Krzysztof Kozlowski)
- Check for kcalloc() failure in of_pci_prop_intr_map() (Duoming
Zhou)"
* tag 'pci-v6.10-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (97 commits)
PCI: Do not wait for disconnected devices when resuming
x86/pci: Skip early E820 check for ECAM region
PCI: Remove unused pci_enable_device_io()
ata: pata_cs5520: Remove unnecessary call to pci_enable_device_io()
PCI: Update pci_find_capability() stub return types
PCI: Remove PCI_IRQ_LEGACY
scsi: vmw_pvscsi: Do not use PCI_IRQ_LEGACY instead of PCI_IRQ_LEGACY
scsi: pmcraid: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
scsi: mpt3sas: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
scsi: megaraid_sas: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
scsi: ipr: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
scsi: hpsa: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
scsi: arcmsr: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
wifi: rtw89: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
dt-bindings: PCI: rockchip,rk3399-pcie: Add missing maxItems to ep-gpios
Revert "genirq/msi: Provide constants for PCI/IMS support"
Revert "x86/apic/msi: Enable PCI/IMS"
Revert "iommu/vt-d: Enable PCI/IMS"
Revert "iommu/amd: Enable PCI/IMS"
Revert "PCI/MSI: Provide IMS (Interrupt Message Store) support"
...
Calibrated data will be set to default after loading DSP config params,
which will cause speaker protection work abnormally. Reload calibrated
data after loading DSP config params. Remove declaration of unused API
which load calibrated data in wrong sequence, changed the copyright year
and correct file name in license
header.
Fixes: ef3bcde75d ("ASoC: tas2781: Add tas2781 driver")
Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>
Link: https://msgid.link/r/20240518141546.1742-1-shenghao-ding@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
TAS2552 is a Smartamp with I/V sense data, add TX path
to support capturing I/V data.
Fixes: 38803ce7b5 ("ASoC: codecs: tas*: merge .digital_mute() into .mute_stream()")
Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>
Link: https://msgid.link/r/20240518033515.866-1-shenghao-ding@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We got an error report about headphone type detection and button detection.
We fixed the headphone type detection error by adjusting the condition
of setting es8326->hp to 0.And we fixed the button detection error by
adjusting micbias and vref.
Signed-off-by: Zhang Yi <zhangyi@everest-semi.com>
Link: https://msgid.link/r/20240515062517.23661-1-zhangyi@everest-semi.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Match against the correct string to decide to add the '-sdca' postfix:
instead of codec_dai->name the correct one is component->name_prefix.
The component->name_prefix is added previously to the card->components as
hs.
Fixes: 9a9d31b149 ("ASoC: Intel: sof_sdw_rt_sdca_jack_common: remove -sdca for new codecs")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240513140730.27048-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Makefile in AMD ACP driver has a line substitution with "=" instead of
"+="; this overrides the preexisting item, hence it broke the build
after the recent change to replace *-objs with *-y.
This patch corrects the line.
Fixes: 1a74b21ce5 ("ASoC: SOF: amd: Add Probe functionality support for amd platforms.")
Fixes: 9c2f5b6eb8 ("ASoC: SOF: Use *-y instead of *-objs in Makefile")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/r/20240510170305.03b67d9f@canb.auug.org.au
Link: https://lore.kernel.org/r/20240510073656.23491-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This is a very big update, in large part due to extensive work the Intel
people have been doing in their drivers though it's also been busy
elsewhere. There's also a big overhaul of the DAPM documentation from
Luca Ceresoli arising from the work he did putting together his recent
ELC talk, and he also contributed a new tool for visualising the DAPM
state.
- A new tool dapm-graph for visualising the DAPM state.
- Substantial fixes and clarifications for the DAPM documentation.
- Very large updates throughout the Intel audio drivers.
- Cleanups of accessors for driver data, module labelling, and for
constification.
- Modernsation and cleanup work in the Mediatek drivers.
- Several fixes and features for the DaVinci I2S driver.
- New drivers for several AMD and Intel platforms, Nuvoton NAU8325,
Rockchip RK3308 and Texas Instruments PCM6240.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmZB2aoACgkQJNaLcl1U
h9D9YQf+K66pFTAMro/X4KWXfg3EeHnqgwbdb1pN/3zKqFgnxPfxJvhvpeM+bFSj
yZGssZZzd9jMkm6rLOZRPCycqSZtimy9DjSnNyPhQgU0jA2ZS1NRMnpN77ubMkPW
IBeWO8j5TBYaqttlmM0YBscErng9GsNqOD5a+HW9AJz5+TYbIIWt/2TVnyBRU0LV
NGkKj1x7AvJY239kitJ4cfFGZpPaGU7bxUk1HCpSPWM+asIpNSxBhKD73zZlWHZ/
kwJSbFslXdCm/TZZQtox/Z8GClxQ2dasWEfXWZK9kBJbHD3UH7VJ4Em50pBWnKis
piarddgSvu5zhVmZkhJhkmOe8jiswA==
=N5Dj
-----END PGP SIGNATURE-----
Merge tag 'asoc-v6.10' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Updates for v6.10
This is a very big update, in large part due to extensive work the Intel
people have been doing in their drivers though it's also been busy
elsewhere. There's also a big overhaul of the DAPM documentation from
Luca Ceresoli arising from the work he did putting together his recent
ELC talk, and he also contributed a new tool for visualising the DAPM
state.
- A new tool dapm-graph for visualising the DAPM state.
- Substantial fixes and clarifications for the DAPM documentation.
- Very large updates throughout the Intel audio drivers.
- Cleanups of accessors for driver data, module labelling, and for
constification.
- Modernsation and cleanup work in the Mediatek drivers.
- Several fixes and features for the DaVinci I2S driver.
- New drivers for several AMD and Intel platforms, Nuvoton NAU8325,
Rockchip RK3308 and Texas Instruments PCM6240.
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:
This patchset should be the last batch for this kernel cycle!
Brent Lu continued his cleanups to refactor and use fewer machine
drivers on Chrmebooks.
Bard Liao updated the sof-sdw machine driver to deal with UCM support
of the RT712 configuration. Note that this sof-sdw driver will be
refactored in the next kernel cycle to allow AMD and others to reuse
common SoundWire parts that are not Intel-specific. Initial changes
are described here: https://github.com/thesofproject/linux/pull/4967
commit c6f597bc59 ("ASoC: audio-graph-card2: remove unneeded
of_node_get()") removed of_node_get(), but it need to keep original
reference, so of_node_get() itself is needed.
Because of_get_next_child() will call of_node_put() inside, if the
reference count dropped to zero, then of_node_get() after that will be
use afer free. Need to call of_node_get() *before* that.
Fixes: c6f597bc59 ("ASoC: audio-graph-card2: remove unneeded of_node_get()")
Link: https://lore.kernel.org/r/f930862e-9d30-4ea3-b3e7-b4b4f411f6d1@moroto.mountain
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/875xvmqzs8.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
enumeration_complete will be completed when a peripheral is attached.
And initialization_complete will be completed when a peripheral is
initialized. rt715_dev_resume() should wait for initialization_complete
instead of enumeration_complete.
the issue exists since commit 20d17057f0 ("ASoC: rt715-sdca: Add RT715
sdca vendor-specific driver"), but the commit can only apply to
commit f892e66fca ("ASoC: rt-sdw*: add __func__ to all error logs").
Fixes: f892e66fca ("ASoC: rt-sdw*: add __func__ to all error logs")
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240509163658.68062-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
get_codec_name_and_route() get dai name from the first codec dai in a dai
link. However, the dai may not always be the first codec dai. Use the
dai parameter to make sure get_codec_name_and_route() refers to the
correct dai.
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240509163418.67746-19-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
A generic .rtd_init() callback could be used by different dais. It is
useful to pass dai parameter to the callback. The dai parameter will be
used in the follow up commit. No functional change here.
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240509163418.67746-18-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
sof_sdw_rtd_init() will add the controls and widgets if we set them in
the codec_info. Move the additions from .rtd_init callback to
sof_sdw_rtd_init().
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240509163418.67746-17-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently, we add card controls and dapm widgets one by one in the
codec_info->dais->rtd_init callback. Duplicated controls and dapm
widgets will be added if there are more than one types of amps in the
dai link. Moving it to sof_sdw_rtd_init() and only add the
controls/widgets of the first codec dai can avoid the duplications.
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240509163418.67746-16-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Some controls and widgets have exactly the same items. Rename them to be
generic. This is a preparation for further cleanup. No function change.
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240509163418.67746-15-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
To be consistent to other amps that used in the machine driver.
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240509163418.67746-14-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Since there is dai link helper max_98373_dai_link, we could change all
functions and data of max98373 to static.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240509163418.67746-13-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add dapm routes of max98373 to sdw driver and remove dependency of
maxim-common module.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240509163418.67746-12-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use max_98373_dai_link() function to initialize dai link of maxim
max98373 speaker amplifier. No functional change.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240509163418.67746-11-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use max_98373_dai_link() function to initialize dai link of maxim
max98373 speaker amplifier. No functional change.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240509163418.67746-10-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use max_98373_dai_link() function to initialize dai link of maxim
max98373 speaker amplifier. No functional change.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240509163418.67746-9-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a helper function, max_98373_dai_link(), for machine driver to
initialize dai link of maxim max98373 speaker amplifier.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240509163418.67746-8-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
cs42l43 is on link 0. No amp in this configuration, will use cs42l43
speaker or bridge.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240509163418.67746-7-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
cs42l43 is on link 0. No amp in this configuration, will use cs42l43
speaker or bridge.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240509163418.67746-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The original code for rt1015p could support 1 or 2 rt1015p device
instances in ACPI. However, all designs implement only 1 instance in
ACPI table so we remove the code segment which is for 2 instances.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240509163418.67746-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Since mtl chromebook is using DMI quirk for board config, changing the
SSP port config of mtl_rt5682_def to RVP to simplify mtl board id and
enumeration table.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240509163418.67746-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The quirk for cml chromebook hatch could be removed since we have
cml_rt5682_def board id now.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240509163418.67746-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Realtek new SoundWire codecs are all -sdca version. No need to add
-sdca to distinguish the non-sdca version. To be consistent with "spk:"
and "mic:" components string, remove "-sdca" suffix from "hs:"
components string.
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240509163418.67746-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
For DSP_A, data is a BCK cycle behind LRCK trigger edge. For DSP_B, this
delay doesn't exist. Fix the delay configuration to match the standard.
Fixes: 52fcd65414 ("ASoC: mediatek: mt8192: support tdm in platform driver")
Signed-off-by: Hsin-Te Yuan <yuanhsinte@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20240509-8192-tdm-v1-1-530b54645763@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
"lnk" is used as "port0", and it will be used to get "port1" by
of_get_next_child(ports, lnk). It will call of_node_put() inside. This
function is calling of_node_get() to make up for it, but it doesn't call
paired of_node_put(port0) when it quit function.
This of_node_get() itself is not needed, let's remove it.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87jzk3akoo.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Takashi Iwai <tiwai@suse.de>:
This is a series of trivial cleanup patches for ASoC to correct
the *-objs suffix in Makefile. The other ALSA code has been covered
by a previous patch set
https://lore.kernel.org/r/20240507135513.14919-1-tiwai@suse.de
As was suggested in a patch review, *-objs suffix in Makefile is
basically a wrong use nowadays for kernel driver modules.
They should be replaced with *-y suffix instead.
This is a result of systematic conversions, separated per directory.
Only lightly compile-tested.
Now that make W=1 starts complaining the lack of MODULE_DESCRIPTION(),
let's add the missing information.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/ZjpQm-hxLQtpgkUx@smile.fi.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Dragan Simic <dsimic@manjaro.org>
Link: https://lore.kernel.org/r/20240508091909.27062-2-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
*-objs suffix is reserved rather for (user-space) host programs while
usually *-y suffix is used for kernel drivers (although *-objs works
for that purpose for now).
Let's correct the old usages of *-objs in Makefiles.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240507155540.24815-35-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
*-objs suffix is reserved rather for (user-space) host programs while
usually *-y suffix is used for kernel drivers (although *-objs works
for that purpose for now).
Let's correct the old usages of *-objs in Makefiles.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240507155540.24815-34-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
*-objs suffix is reserved rather for (user-space) host programs while
usually *-y suffix is used for kernel drivers (although *-objs works
for that purpose for now).
Let's correct the old usages of *-objs in Makefiles.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240507155540.24815-33-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
*-objs suffix is reserved rather for (user-space) host programs while
usually *-y suffix is used for kernel drivers (although *-objs works
for that purpose for now).
Let's correct the old usages of *-objs in Makefiles.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240507155540.24815-32-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
*-objs suffix is reserved rather for (user-space) host programs while
usually *-y suffix is used for kernel drivers (although *-objs works
for that purpose for now).
Let's correct the old usages of *-objs in Makefiles.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240507155540.24815-31-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
*-objs suffix is reserved rather for (user-space) host programs while
usually *-y suffix is used for kernel drivers (although *-objs works
for that purpose for now).
Let's correct the old usages of *-objs in Makefiles.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240507155540.24815-30-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
*-objs suffix is reserved rather for (user-space) host programs while
usually *-y suffix is used for kernel drivers (although *-objs works
for that purpose for now).
Let's correct the old usages of *-objs in Makefiles.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240507155540.24815-29-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
*-objs suffix is reserved rather for (user-space) host programs while
usually *-y suffix is used for kernel drivers (although *-objs works
for that purpose for now).
Let's correct the old usages of *-objs in Makefiles.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240507155540.24815-28-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
*-objs suffix is reserved rather for (user-space) host programs while
usually *-y suffix is used for kernel drivers (although *-objs works
for that purpose for now).
Let's correct the old usages of *-objs in Makefiles.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240507155540.24815-27-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
*-objs suffix is reserved rather for (user-space) host programs while
usually *-y suffix is used for kernel drivers (although *-objs works
for that purpose for now).
Let's correct the old usages of *-objs in Makefiles.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240507155540.24815-26-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
*-objs suffix is reserved rather for (user-space) host programs while
usually *-y suffix is used for kernel drivers (although *-objs works
for that purpose for now).
Let's correct the old usages of *-objs in Makefiles.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240507155540.24815-25-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
*-objs suffix is reserved rather for (user-space) host programs while
usually *-y suffix is used for kernel drivers (although *-objs works
for that purpose for now).
Let's correct the old usages of *-objs in Makefiles.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240507155540.24815-24-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
*-objs suffix is reserved rather for (user-space) host programs while
usually *-y suffix is used for kernel drivers (although *-objs works
for that purpose for now).
Let's correct the old usages of *-objs in Makefiles.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240507155540.24815-23-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
*-objs suffix is reserved rather for (user-space) host programs while
usually *-y suffix is used for kernel drivers (although *-objs works
for that purpose for now).
Let's correct the old usages of *-objs in Makefiles.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240507155540.24815-22-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
*-objs suffix is reserved rather for (user-space) host programs while
usually *-y suffix is used for kernel drivers (although *-objs works
for that purpose for now).
Let's correct the old usages of *-objs in Makefiles.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240507155540.24815-21-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
*-objs suffix is reserved rather for (user-space) host programs while
usually *-y suffix is used for kernel drivers (although *-objs works
for that purpose for now).
Let's correct the old usages of *-objs in Makefiles.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240507155540.24815-20-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
*-objs suffix is reserved rather for (user-space) host programs while
usually *-y suffix is used for kernel drivers (although *-objs works
for that purpose for now).
Let's correct the old usages of *-objs in Makefiles.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240507155540.24815-19-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
*-objs suffix is reserved rather for (user-space) host programs while
usually *-y suffix is used for kernel drivers (although *-objs works
for that purpose for now).
Let's correct the old usages of *-objs in Makefiles.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240507155540.24815-18-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
*-objs suffix is reserved rather for (user-space) host programs while
usually *-y suffix is used for kernel drivers (although *-objs works
for that purpose for now).
Let's correct the old usages of *-objs in Makefiles.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240507155540.24815-17-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
*-objs suffix is reserved rather for (user-space) host programs while
usually *-y suffix is used for kernel drivers (although *-objs works
for that purpose for now).
Let's correct the old usages of *-objs in Makefiles.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240507155540.24815-16-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
*-objs suffix is reserved rather for (user-space) host programs while
usually *-y suffix is used for kernel drivers (although *-objs works
for that purpose for now).
Let's correct the old usages of *-objs in Makefiles.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240507155540.24815-15-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
*-objs suffix is reserved rather for (user-space) host programs while
usually *-y suffix is used for kernel drivers (although *-objs works
for that purpose for now).
Let's correct the old usages of *-objs in Makefiles.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240507155540.24815-14-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
*-objs suffix is reserved rather for (user-space) host programs while
usually *-y suffix is used for kernel drivers (although *-objs works
for that purpose for now).
Let's correct the old usages of *-objs in Makefiles.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240507155540.24815-13-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
*-objs suffix is reserved rather for (user-space) host programs while
usually *-y suffix is used for kernel drivers (although *-objs works
for that purpose for now).
Let's correct the old usages of *-objs in Makefiles.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240507155540.24815-12-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
*-objs suffix is reserved rather for (user-space) host programs while
usually *-y suffix is used for kernel drivers (although *-objs works
for that purpose for now).
Let's correct the old usages of *-objs in Makefiles.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240507155540.24815-11-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
*-objs suffix is reserved rather for (user-space) host programs while
usually *-y suffix is used for kernel drivers (although *-objs works
for that purpose for now).
Let's correct the old usages of *-objs in Makefiles.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240507155540.24815-10-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
*-objs suffix is reserved rather for (user-space) host programs while
usually *-y suffix is used for kernel drivers (although *-objs works
for that purpose for now).
Let's correct the old usages of *-objs in Makefiles.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240507155540.24815-9-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
*-objs suffix is reserved rather for (user-space) host programs while
usually *-y suffix is used for kernel drivers (although *-objs works
for that purpose for now).
Let's correct the old usages of *-objs in Makefiles.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240507155540.24815-8-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
*-objs suffix is reserved rather for (user-space) host programs while
usually *-y suffix is used for kernel drivers (although *-objs works
for that purpose for now).
Let's correct the old usages of *-objs in Makefiles.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240507155540.24815-7-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
*-objs suffix is reserved rather for (user-space) host programs while
usually *-y suffix is used for kernel drivers (although *-objs works
for that purpose for now).
Let's correct the old usages of *-objs in Makefiles.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240507155540.24815-6-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
*-objs suffix is reserved rather for (user-space) host programs while
usually *-y suffix is used for kernel drivers (although *-objs works
for that purpose for now).
Let's correct the old usages of *-objs in Makefiles.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240507155540.24815-5-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
*-objs suffix is reserved rather for (user-space) host programs while
usually *-y suffix is used for kernel drivers (although *-objs works
for that purpose for now).
Let's correct the old usages of *-objs in Makefiles.
Link: https://lore.kernel.org/r/20240507155540.24815-4-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
*-objs suffix is reserved rather for (user-space) host programs while
usually *-y suffix is used for kernel drivers (although *-objs works
for that purpose for now).
Let's correct the old usages of *-objs in Makefiles.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240507155540.24815-3-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
*-objs suffix is reserved rather for (user-space) host programs while
usually *-y suffix is used for kernel drivers (although *-objs works
for that purpose for now).
Let's correct the old usages of *-objs in Makefiles.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240507155540.24815-2-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>:
Static 'struct snd_pcm_hardware' is not modified by few drivers and its
copy is passed to the core, so it can be made const for increased code
safety.
Merge series from Wolfram Sang <wsa+renesas@sang-engineering.com>:
There is a confusing pattern in the kernel to use a variable named 'timeout' to
store the result of wait_for_*() functions causing patterns like:
timeout = wait_for_completion_timeout(...)
if (!timeout) return -ETIMEDOUT;
with all kinds of permutations. Use 'time_left' as a variable to make the code
obvious and self explaining.
This is part of a tree-wide series. The rest of the patches can be found here
(some parts may still be WIP):
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux.git i2c/time_left
Because these patches are generated, I audit them before sending. This is why I
will send series step by step. Build bot is happy with these patches, though.
No functional changes intended.
Merge series from Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>:
Do not open-code snd_soc_substream_to_rtd() when accessing
snd_pcm_substream->private_data. This makes code more consistent with
rest of ASoC and allows in the future to move the field to any other
place or add additional checks in snd_soc_substream_to_rtd().
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:
This patchset does not change any functionality. It only clarifies the
Copyright information in ASoC/HDAudio contributions, where an "All
rights reserved" notice was mistakenly added in a number of files over
the years, likely due to copy/paste. The Intel template never included
this statement.
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:
The SoundWire BPT support will rely on the HDaudio DMA. This exposes a
circular dependency module dependency which has to be resolved by
splitting common parts used by HDaudio and SoundWire parts, and
'generic' parts used by HDaudio only.
This patchset does not change any functionality, it just moves code
around, exposes symbols that are used in the new module. The code has
been in use for more than one kernel cycle already so it really
shouldn't break any existing platforms.
The main issue with such code moves is that it makes backports or
fixes more complicated. That's the main reason why we held back these
patches until we were reasonably confident on the maturity of MTL and
LNL drivers.
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:
The first patch handles a problematic configuration where the wrong
machine driver/topology is used: when the hardware reports an external
HDaudio codec the direction is to ignore/discard ACPI SoundWire
devices.
The last two patch deal with DMIC format configurations and allow
users to select S16_LE even if the DMIC and internal copiers only
support 24 or 32-bits. The code changes are located in sound/soc/sof/
but in the scope of Intel DAIs.
There is a confusing pattern in the kernel to use a variable named 'timeout' to
store the result of wait_for_completion_timeout() causing patterns like:
timeout = wait_for_completion_timeout(...)
if (!timeout) return -ETIMEDOUT;
with all kinds of permutations. Use 'time_left' as a variable to make the code
self explaining.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20240430115438.29134-5-wsa+renesas@sang-engineering.com
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
There is a confusing pattern in the kernel to use a variable named 'timeout' to
store the result of wait_for_completion_timeout() causing patterns like:
timeout = wait_for_completion_timeout(...)
if (!timeout) return -ETIMEDOUT;
with all kinds of permutations. Use 'time_left' as a variable to make the code
self explaining.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20240430115438.29134-4-wsa+renesas@sang-engineering.com
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
There is a confusing pattern in the kernel to use a variable named 'timeout' to
store the result of wait_for_completion_timeout() causing patterns like:
timeout = wait_for_completion_timeout(...)
if (!timeout) return -ETIMEDOUT;
with all kinds of permutations. Use 'time_left' as a variable to make the code
self explaining.
Fix to the proper variable type 'unsigned long' while here.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20240430115438.29134-3-wsa+renesas@sang-engineering.com
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
There is a confusing pattern in the kernel to use a variable named 'timeout' to
store the result of wait_for_completion_timeout() causing patterns like:
timeout = wait_for_completion_timeout(...)
if (!timeout) return -ETIMEDOUT;
with all kinds of permutations. Use 'time_left' as a variable to make the code
self explaining.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20240430115438.29134-2-wsa+renesas@sang-engineering.com
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
For some reason a number of files included the "All rights reserved"
statement. Good old copy-paste made sure this mistake proliferated.
Remove the "All rights reserved" in all Intel-copyright to align with
internal guidance.
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20240503140359.259762-8-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
For some reason a number of files included the "All rights reserved"
statement. Good old copy-paste made sure this mistake proliferated.
Remove the "All rights reserved" in all Intel-copyright to align with
internal guidance.
Acked-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20240503140359.259762-7-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
For some reason a number of files included the "All rights reserved"
statement. Good old copy-paste made sure this mistake proliferated.
Remove the "All rights reserved" in all Intel-copyright to align with
internal guidance.
Acked-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20240503140359.259762-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
For some reason a number of files included the "All rights reserved"
statement. Good old copy-paste made sure this mistake proliferated.
Remove the "All rights reserved" in all Intel-copyright to align with
internal guidance.
Acked-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20240503140359.259762-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
For some reason a number of files included the "All rights reserved"
statement. Good old copy-paste made sure this mistake proliferated.
Remove the "All rights reserved" in all Intel-copyright to align with
internal guidance.
Acked-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20240503140359.259762-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
For some reason a number of files included the "All rights reserved"
statement. Good old copy-paste made sure this mistake proliferated.
Remove the "All rights reserved" in all Intel-copyright to align with
internal guidance.
Acked-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20240503140359.259762-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
For some reason a number of files included the "All rights reserved"
statement. Good old copy-paste made sure this mistake proliferated.
Remove the "All rights reserved" in all Intel-copyright to align with
internal guidance.
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20240503140359.259762-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Machine boards expose input device for use with userspace. Current name
in some cases is incorrect, fix it.
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20240506121106.3792340-1-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix a warning reported by robot kernel test that 'fw_entry' in function
'tas2781_load_calibration' is used uninitialized with compiler
sh4-linux-gcc (GCC) 13.2.0, an update of copyright and a correction of the
comments.
Fixes: ef3bcde75d ("ASoc: tas2781: Add tas2781 driver")
Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>
Link: https://lore.kernel.org/r/20240505122346.1326-1-shenghao-ding@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Now that most of the code moves are done, we can add a new module and
the required EXPORT_SYMBOL definitions.
No functionality change, just a new module added.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20240503135221.229202-8-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
hda_sdw_process_wakeen() is used in hda-loader.c, but defined in
hda.c. This code split will create a circular dependency when hda.c is
moved to a different module. Rather than an invasive code change, this
patch follows the model used for sdw_check_wakeen_irq() with an
abstraction. For now all abstractions point to the same common
routine, which is arguably not great, but this also provides us with a
future-proof way of addressing platform-specific wake processing.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20240503135221.229202-7-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
CREATE_TRACEPOINTS is supposed to be used once. To avoid modpost
issues when creating modules, let's move the tracepoint creation in a
single object file.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20240503135221.229202-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
To avoid circular dependencies when moving hda.c to a separate module,
we need to move the common code to hda-ipc.c and hda-dsp.c
No functionality change, just code move.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20240503135221.229202-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The existing code relies on the 'HDA_COMMON' module and namespace. We
need to start splitting top-level parts from the low-level ones,
otherwise we will not be able to reuse the low-level parts DMA support
for SoundWire/BPT.
In the end the dependencies will be:
+----------------------------------------------+
| |
| v
sof-pci-intel-xxx --> sof-intel-hda ------------> sof-hda-common
| ^
| |
+-> soundwire_intel --> sof_hda_sdw_bpt
This patch adds the initial split between the sof-pci-intel-xxx
modules and the common parts, in a follow-up patch we will further
split the HDA_COMMON parts
Since the PCI modules are not all independent, i.e. the CNL parts are
also used in JSL and TGL, additional Kconfig and namespace modules
were added.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20240503135221.229202-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
To avoid circular dependencies between SOF/Intel and SoundWire/Intel,
we need to split the top-level hda.c from the rest of the code. This
patch first regroups all SoundWire related code in hda.c.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20240503135221.229202-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Export this helper so that we can report the DPIB position if the BPT
DMA do not complete - this is very useful to see if the DMA started or
gets stuck somehow with invalid bandwidth configurations.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20240503135221.229202-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In case of capture and when the DAI copier have single bit depth supported
on it's input side we should use this format instead of the one in
fe_params.
Regardless of the stream direction for the NHLT blob lookup when the DAI
copier only supports single bit depth on the DAI side we should only look
for a blob which matches with this single configuration.
For DMIC if the DAI copier supports multiple bit depths, try to request
32-bit blob first if the requested bit depth is 16-bit.
If the 32-bit blob is available then look for marching (32-bit) copier
format to make sure that both the blob and copier have correct parameters.
Reviewed-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240503133253.108201-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a bitmask parameter to sof_ipc4_update_hw_params() to be able to select
the param to be updated.
This feature can be used when not all params should be updated, for example
if caller only wants to update the format in the params, leaving the
channels and rates untouched.
Reviewed-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240503133253.108201-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The machine driver and topology selection starts with I2S, then
SoundWire and last uses HDaudio as a fallback. That assumes that the
ACPI information is correct but there are of course exceptions to the
rule.
On a Lenovo platform, an external HDaudio codec is detected, but the
ACPI tables expose TWO RT711 jack codecs. This patch skips the
SoundWire selection in case an external HDaudio codec is detected -
which only works with the additional assumption that no one will mix
HDaudio and SoundWire.
Closes: https://github.com/thesofproject/linux/issues/4962
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240503133253.108201-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
These drivers don't use the driver_data member of struct i2c_device_id,
so don't explicitly initialize this member.
This prepares putting driver_data in an anonymous union which requires
either no initialization or named designators. But it's also a nice
cleanup on its own.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20240502074722.1103986-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
ACP pin configuration varies based on acp version.
ACP PCI driver should read the ACP PIN config value and based on config
value, it has to create a platform device in below two conditions.
1) If ACP PDM configuration is selected from BIOS and ACP PDM controller
exists.
2) If ACP I2S configuration is selected from BIOS.
Other than above scenarios, ACP PCI driver should skip the platform
device creation logic, i.e. ACP PCI driver probe sequence should never
fail if other acp pin configuration is selected. It should skip platform
device creation logic.
check_acp_pdm() function was implemented for ACP6.x platforms to check
ACP PDM configuration. Previously, this code was safe guarded by
FLAG_AMD_LEGACY_ONLY_DMIC flag check.
This implementation breaks audio use cases for Huawei Matebooks which are
based on ACP3.x varaint uses I2S configuration.
In current scenario, check_acp_pdm() function returns -ENODEV value
which results in ACP PCI driver probe failure without creating a platform
device even in case of valid ACP pin configuration.
Implement check_acp_config() as a common function which invokes platform
specific acp pin configuration check functions for ACP3.x, ACP6.0 & ACP6.3
& ACP7.0 variants and checks for ACP PDM controller.
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218780
Fixes: 4af565de9f ("ASoC: amd: acp: fix for acp pdm configuration check")
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://lore.kernel.org/r/20240502140340.4049021-1-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Jerome Brunet <jbrunet@baylibre.com>:
This patchset fixes 2 problems on TDM which both find a solution
by properly implementing the .trigger() callback for the TDM backend.
ATM, enabling the TDM formatters is done by the .prepare() callback
because handling the formatter is slow due to necessary calls to CCF.
The first problem affects the TDMIN. Because .prepare() is called on DPCM
backend first, the formatter are started before the FIFOs and this may
cause a random channel shifts if the TDMIN use multiple lanes with more
than 2 slots per lanes. Using trigger() allows to set the FE/BE order,
solving the problem.
There has already been an attempt to fix this 3y ago [1] and reverted [2]
It triggered a 'sleep in irq' error on the period IRQ. The solution is
to just use the bottom half of threaded IRQ. This is patch #1. Patch #2
and #3 remain mostly the same as 3y ago.
For TDMOUT, the problem is on pause. ATM pause only stops the FIFO and
the TDMOUT just starves. When it does, it will actually repeat the last
sample continuously. Depending on the platform, if there is no high-pass
filter on the analog path, this may translate to a constant position of
the speaker membrane. There is no audible glitch but it may damage the
speaker coil.
Properly stopping the TDMOUT in pause solves the problem. There is
behaviour change associated with that fix. Clocks used to be continuous
on pause because of the problem above. They will now be gated on pause by
default, as they should. The last change introduce the proper support for
continuous clocks, if needed.
[1]: https://lore.kernel.org/linux-amlogic/20211020114217.133153-1-jbrunet@baylibre.com
[2]: https://lore.kernel.org/linux-amlogic/20220421155725.2589089-1-narmstrong@baylibre.com
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:
Last batch of cleanups from Brent Lu, with Chromebooks now supported
with fewer modular machine drivers.
Merge series from Cezary Rojewski <cezary.rojewski@intel.com>:
A set of changes that aims to improve readability of cohesiveness of the
pcm code for the avs-driver.
Start off with a change that synchronizes DAI open/close - DAIs are
started up in ascending order yet their shutdown does not follow the
scheme - it is done in the ascending order too, rather than desceding
one. This patch is a dependency for the next one in line.
To align the HDAudio DAI startup/shutdown with the non-HDAudio
equivalents, relocate the code from component to DAI. The reason above
is a dependency stems from codec driver requirements - HDAudio code
found in sound/pci/hda/ expects substream->runtime->private_data to
point to a valid stream (HOST) pointer.
With the hard part done, the follow up changes update the existing code
to reduce it is complexity - removal of duplicates, renaming of
ambiguous functions and adding new fields to DAI-data object so that the
number of local variables and casts is reduced.
Merge series from Krzysztof Kozlowski <krzk@kernel.org>:
The core code does not modify the 'struct snd_sof_dsp_ops' passed via
pointer in various places, so this can be made pointer to const in few
places. This in turn allows few drivers to have the local (usually
static) 'struct snd_sof_dsp_ops' as const which increased code safety,
as it is now part of rodata.
Not all drivers can be made safer that way. Intel and AMD rely on
customizing that 'struct snd_sof_dsp_ops' before passing to SOF, so they
won't benefit. They don't lose anything., either.
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:
Fixes when fw_lib_prefix is not set, updated error messages, improved
dmesg logs to SoundWire configurations not supported by ACPI
tables/topology and support for IEC61937 passthrough.
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:
This patchset corrects a couple of mistakes corrected, improves
snd_soc_card allocation. The new functionality is mostly for
SoundWire platforms, with new SKUs for Dell and Acer, and support for
the Cirrus Logic bridge/sidecar amplifier topology.
The AllWinner H6 and later SoCs that sport a DMIC block contain a set of registers to control
the gain (left + right) of each of the four supported channels.
Add ASoC controls for changing each of the stereo channel gains using alsamixer and alike
Signed-off-by: Joao Schim <joao@schimsalabim.eu>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20240429194920.1596257-1-joao@schimsalabim.eu
Signed-off-by: Mark Brown <broonie@kernel.org>
'struct snd_sof_dsp_ops' is not modified by core code, so it can be made
const for increased code safety.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20240426-n-const-ops-var-v2-14-e553fe67ae82@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
'struct snd_sof_dsp_ops' is not modified by core code, so it can be made
const for increased code safety.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20240426-n-const-ops-var-v2-13-e553fe67ae82@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
'struct snd_sof_dsp_ops' is not modified by core code, so it can be made
const for increased code safety.
Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20240426-n-const-ops-var-v2-12-e553fe67ae82@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
'struct snd_sof_dsp_ops' is not modified by core code, so it can be made
const for increased code safety.
Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20240426-n-const-ops-var-v2-11-e553fe67ae82@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
'struct snd_sof_dsp_ops' is not modified by core code, so it can be made
const for increased code safety.
Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20240426-n-const-ops-var-v2-10-e553fe67ae82@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
'struct snd_sof_dsp_ops' is not modified by core code, so it can be made
const for increased code safety.
Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20240426-n-const-ops-var-v2-9-e553fe67ae82@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
'struct snd_sof_dsp_ops' is not modified by core code, so it can be made
const for increased code safety.
Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20240426-n-const-ops-var-v2-8-e553fe67ae82@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
'struct snd_sof_dsp_ops' is not modified by core code, so it can be made
const for increased code safety.
Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20240426-n-const-ops-var-v2-7-e553fe67ae82@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
'struct snd_sof_dsp_ops' is not modified by core code, so it can be made
const for increased code safety.
Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20240426-n-const-ops-var-v2-6-e553fe67ae82@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
'struct snd_sof_dsp_ops' is not modified by core code, so it can be made
const for increased code safety.
Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20240426-n-const-ops-var-v2-5-e553fe67ae82@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Constify the pointer to 'struct snd_sof_dsp_ops' to annotate that
functioon does not modify pointed data.
Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20240426-n-const-ops-var-v2-3-e553fe67ae82@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Constify the pointer to 'struct snd_sof_dsp_ops' to annotate that
functioon does not modify pointed data.
Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20240426-n-const-ops-var-v2-2-e553fe67ae82@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Constify the pointer to 'struct snd_sof_dsp_ops' to annotate that
functioon does not modify pointed data.
Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20240426-n-const-ops-var-v2-1-e553fe67ae82@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
If a PCM is set to use ChainDMA then add it to the card->components string
after a marker of iec61937-pcm:, for example on current HDA platforms where
HDMI is set to use ChainDMA:
iec61937-pcm:5,4,3 (the order of the PCM ids can differ)
UCM is expected to parse and use this property to allow applications to
use bytestream passthrough in a standard way.
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240426153902.39560-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Most of the SoundWire support issues come from bad ACPI information,
or configuration reported by ACPI that are not supported by the SOF
driver/topology. The users see a "No SoundWire machine driver found"
message without any details, and the fallback to HDaudio w/ HDMI is
used.
We can reduce our support load with a clear dev_info() log that will
give us a clear hint on the mismatch and why a machine driver/topology
were not found.
Example log on a MTL device:
[ 13.158599] sof-audio-pci-intel-mtl 0000:00:1f.3: No SoundWire machine driver found for the ACPI-reported configuration:
[ 13.158603] sof-audio-pci-intel-mtl 0000:00:1f.3: link 0 mfg_id 0x025d part_id 0x0713 version 0x3
[ 13.158606] sof-audio-pci-intel-mtl 0000:00:1f.3: link 1 mfg_id 0x025d part_id 0x1316 version 0x3
[ 13.158608] sof-audio-pci-intel-mtl 0000:00:1f.3: link 2 mfg_id 0x025d part_id 0x1316 version 0x3
In parallel, we will also provide an update to `alsa-info` to log all
SoundWire peripherals found in ACPI tables.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20240426153902.39560-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Simplify code to return when no links are enabled. No functional
change, just code cleanup before updates.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20240426153902.39560-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In sof_widget_ready() function, the shift field of
struct snd_soc_tplg_dapm_widget is incorrectly used to print
widget id in dev_err(scomp->dev, "error: failed to add widget id %d ..",
this patch removes the useless tw->shift from the error output.
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Yong Zhi <yong.zhi@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240426153902.39560-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The firmware libraries are not supported by IPC3, the fw_lib_path is not
a valid parameter and it is always NULL.
Do not create the debugfs file for IPC3 at all as it is not applicable.
With IPC4 some vendors/platforms might not support loadable libraries and
the fw_lib_prefix is left to NULL to indicate this.
Handle such case with allocating "Not supported" string.
Reviewed-by: Marc Herbert <marc.herbert@intel.com>
Fixes: 17f4041244 ("ASoC: SOF: debug: show firmware/topology prefix/names")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240426153902.39560-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The cs42l43 has both a SPI master and an I2S interface, these can
be used to populate 2 cs35l56 amplifiers as sidecar devices along
side the cs42l43. Giving a system that looks like:
+-----+ +---------+ <- SPI -> +---------+
| CPU | <- SDW -> | CS42L43 | | CS35L56 |
+-----+ +---------+ <- I2S -> +---------+
Add a quirk to specify this feature is present and use it to add
codec to codec DAI link to connect the amplifiers into the sound
card, add appropriate widgets, and setup clocking on the
amplifiers.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Maciej Strozek <mstrozek@opensource.cirrus.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240426152123.36284-13-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support for systems that have additional non-SoundWire devices
(sidecars) connected to one of the SoundWire devices in the
system. This is done through the addition of two callbacks, one used
at endpoint parsing time that will return the number of devices and
DAI links to be added, and another called later as the DAI links are
created that will populate those devices into the appropriate arrays.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240426152123.36284-12-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Move the population of the codec_conf array from endpoint parsing
time to link creation time. This is slightly cleaner as the
population is done whilst the DAI links are also being populated,
putting all population together. However, primarily this facilitates
allowing additional non-SoundWire devices to be easily added into
the array in future feature additions.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240426152123.36284-11-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Two independent GitHub PRs let to the addition of one quirk after it
was removed..
Fixes: b10cb955c6 ("ASoC: Intel: sof_sdw: add quirk for Dell SKU 0C0F")
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240426152123.36284-10-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
UCM parse amp with Regex " cfg-amp:([0-9]+)". The "ASoC: Intel: sof_sdw:
remove FOUR_SPEAKER quirks" patch removed "cfg-spk:%d " from components
which removed the necessary space as well and cause UCM can't parse the
amp number properly.
Fixes: 744866d28f ("ASoC: Intel: sof_sdw: remove FOUR_SPEAKER quirks")
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240426152123.36284-9-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
UCM can load a board-specific file based on the card long_name. Remove
the constant "Intel Soundwire SOF" long_name so that the ASoC core can
set the long_name based on DMI information.
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240426152123.36284-8-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The static card_sof_sdw struct is modified during runtime and in case the
module is not removed, but the card is, then the next time the card is
created the card_sof_sdw will contain information from the previous card
which might lead to hard to debug issues, side effects.
Move the snd_soc_card into mc_private and use that to make sure that the
card is initialized correctly.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240426152123.36284-7-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds support for corresponding codecs on LNL hardware
configuration:
SDW0: RT714 DMIC
SDW1: RT1318 Left Speaker
SDW2: RT1318 Right Speaker
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Mac Chiang <mac.chiang@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240426152123.36284-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
SKU 0C64 relies on rt713 (jack codec) on link0, rt1318 (single
amplifier) on link1 and rt1713 (dmic) on link3.
SKU 0CC6 relies on rt713 (jack codec) on link0, rt1318 (two
amplifiers) on link 1-2 and rt1713 (dmic) on link3.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240426152123.36284-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Instead of using a global char array, allocate the string with
devm_kasprintf if needed.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240426152123.36284-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The static hda_soc_card might be modified during runtime which might cause
issues on next time when the card is created.
For example if the dmic_num was set with module parameter then removed for
the next module loading then the card's components will still going to
point to the previous boot's cfg-dmics:X string.
There might be other places where devm allocated memory have been freed but
the hda_soc_card still pointing to the now unallocated memory (the memory
is freed when the platform device is removed).
Fix this issue by moving the snd_soc_card into skl_hda_private and use it
for the card registration to ensure that it is correctly initialized every
time.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240426152123.36284-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
While the HDAudio codec driver expectations must be met - store valid
pointer to HDAudio LINK stream in substream->runtime->private_data - the
code is more readable and easier to maintain if dma_data stores pointers
to both HOST and LINK stream.
DAI BE operations can refer to the LINK stream with data->link_stream,
similarly to how DAI FE operations access the HOST stream with
data->host_stream.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20240426095733.3946951-8-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Drop unused arguments in the avs_dai_prepare() function. With the
function updated, it matches its template in snd_soc_dai_ops and can be
referenced throughout the pcm.c file without need of any wrappers.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20240426095733.3946951-7-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Half of the arguments in avs_dai_startup() are unused and can be
dropped. With the function updated, it matches its template in
snd_soc_dai_ops and can be referenced throughout the pcm.c file without
need of any wrappers.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20240426095733.3946951-6-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Move avs_dai_nonhda_be_shutdown() to avs_dai_shutdown() as the function
is common for all transfer types, not just non-HDAudio ones. Use it
to simplify avs_dai_fe_shutdown().
While at it, fix explicit kfree(data) and use the destructor instead.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20240426095733.3946951-4-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
DAI's startup()/shutdown() shall deal with allocation and freeing of
resources needed to facilitate streaming over it. Currently for HDAudio
BE DAIs some of that task is done in component->open()/close(). Relocate
the relevant pieces to address that.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20240426095733.3946951-3-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
During startup snd_soc_dai_startup() is launched in ascending order and
the exact same thing is done during shutdown procedure. Reverse the
order in the latter so that it is symmetric to the former.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20240426095733.3946951-2-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
For rt5682s codec, we could use bclk as PLL source when the frequency
is 3.072MHz but no 2.4MHz. Update the code to select correct pll_id
and clk_id for 3.072MHz bclk.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240426152529.38345-24-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
A different bclk frequency 3.072MHz was introduced to tgl platform and
is used in mtl topologies. Use SOF API to get frequency from topology
instead of hardcoding.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240426152529.38345-23-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The variable 'pll_id' is needed only when we use snd_soc_dai_set_pll()
to setup PLL. Move the code segment to improve some readability.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240426152529.38345-22-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Move default BYT/CHT quirk to driver_data of sof_rt5682 board. This
fixes a problem that DMI quirk of Minnowboard board got overwritten in
probe function since it's a BYT board.
Fixes: c68e07970e ("ASoC: intel: sof_rt5682: Add quirk for number of HDMI DAI's")
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240426152529.38345-21-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add the board config icl_rt5682_def to rt5682 machine driver for all
icl boards using default SSP port allocation (headphone codec on SSP0).
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240426152529.38345-20-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We don't need this quirk flag since 'is_legacy_cpu' will be true if
this is a BYT/CHT board.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240426152529.38345-19-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a variable mclk_en to sof_rt5682_private structure to reduce
global variable access. No functional change.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240426152529.38345-18-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Delete this driver and use sof_rt5682 machine driver instead.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240426152529.38345-17-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
For glk boards, MAX98357A speaker amplifier is supported by machine
driver glk_rt5682_mx98357a with sound card name glkrt5682max. Use same
name for backward compatibility with existing devices on market.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240426152529.38345-16-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add the board config glk_rt5682_def to rt5682 machine driver for all
glk boards using default SSP port allocation (headphone codec on SSP2,
speaker amplifiers on SSP1).
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240426152529.38345-15-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Remove glk platform support and use sof_da7219 machine driver instead
for existing glk boards with MAX98357A speaker amplifier.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240426152529.38345-14-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
For glk boards, MAX98357A speaker amplifier is supported by machine
driver bxt_da7219_max98357a with sound card name glkda7219max. Use
same name for backward compatibility with existing devices on market.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240426152529.38345-13-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add the board config glk_da7219_def to da7219 machine driver for all
glk boards using default SSP port allocation (headphone codec on SSP2,
speaker amplifiers on SSP1).
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240426152529.38345-12-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Remove cml platform support and use sof_da7219 machine driver instead
for existing cml boards with MAX98357A speaker amplifier.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240426152529.38345-11-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
For cml boards, MAX98357A speaker amplifier is supported by machine
driver bxt_da7219_max98357a with sound card name cmlda7219max. Use
same name for backward compatibility with existing devices on market.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240426152529.38345-10-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support to Maxim MAX98357A speaker amplifier.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240426152529.38345-9-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Remove MAX98390 support and use sof_da7219 machine driver instead for
existing cml boards with MAX98390 speaker amplifier.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240426152529.38345-7-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
For cml boards, MAX98390 speaker amplifier is supported by machine
driver bxt_da7219_max98357a with sound card name cml_max98390_da7219.
Use same name for backward compatibility with existing devices on
market.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240426152529.38345-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add the board config cml_da7219_def to da7219 machine driver for all
cml boards using default SSP port allocation (headphone codec on SSP0,
speaker amplifiers on SSP1).
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240426152529.38345-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support to Maxim MAX98390 speaker amplifier.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240426152529.38345-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support for 2xMAX98390 speaker amplifier running in I2S mode for
existing cml boards.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240426152529.38345-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Two machine drivers sof_rt5682 and sof_nau8825 always register two
speaker widgets 'Left Spk' and 'Right Spk' regardless the actual
number of speakers. Move the widget registration to speaker common
modules to avoid useless speaker widgets for 1 or 4 speaker boards.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240426152529.38345-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The documentation for device_get_named_child_node() mentions this
important point:
"
The caller is responsible for calling fwnode_handle_put() on the
returned fwnode pointer.
"
Add fwnode_handle_put() to avoid leaked references.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240426152939.38471-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The documentation for device_get_named_child_node() mentions this
important point:
"
The caller is responsible for calling fwnode_handle_put() on the
returned fwnode pointer.
"
Add fwnode_handle_put() to avoid a leaked reference.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240426153033.38500-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Amlogic sound cards do create a lot of pcm interfaces, possibly more than
8. Some pcm interfaces are internal (like DPCM backends and c2c) and not
exposed to userspace.
Those interfaces still increase the number passed to snd_find_free_minor(),
which eventually exceeds 8 causing -EBUSY error on card registration if
CONFIG_SND_DYNAMIC_MINORS=n and the interface is exposed to userspace.
select CONFIG_SND_DYNAMIC_MINORS for Amlogic cards to avoid the problem.
Fixes: 7864a79f37 ("ASoC: meson: add axg sound card support")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20240426134150.3053741-1-jbrunet@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
So far, the formatters have been reset/enabled using the .prepare()
callback. This was done in this callback because walking the formatters use
a mutex. A mutex is used because formatter handling require dealing
possibly slow clock operation.
With the support of non-atomic, .trigger() callback may be used which also
allows to properly enable and disable formatters on start but also
pause/resume.
This solve a random shift on TDMIN as well repeated samples on for TDMOUT.
Fixes: d60e4f1e4b ("ASoC: meson: add tdm interface driver")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20240426152946.3078805-4-jbrunet@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Non atomic operations need to be performed in the trigger callback
of the TDM interfaces. Those are BEs but what matters is the nonatomic
flag of the FE in the DPCM context. Just set nonatomic for everything so,
at least, what is done is clear.
Fixes: 7864a79f37 ("ASoC: meson: add axg sound card support")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20240426152946.3078805-3-jbrunet@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
With the AXG audio subsystem, there is a possible random channel shift on
TDM capture, when the slot number per lane is more than 2, and there is
more than one lane used.
The problem has been there since the introduction of the axg audio support
but such scenario is pretty uncommon. This is why there is no loud
complains about the problem.
Solving the problem require to make the links non-atomic and use the
trigger() callback to start FEs and BEs in the appropriate order.
This was tried in the past and reverted because it caused the block irq to
sleep while atomic. However, instead of reverting, the solution is to call
snd_pcm_period_elapsed() in a non atomic context.
Use the bottom half of a threaded IRQ to do so.
Fixes: 6dc4fa179f ("ASoC: meson: add axg fifo base driver")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20240426152946.3078805-2-jbrunet@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the macro PCI_IRQ_INTX instead of the deprecated PCI_IRQ_LEGACY macro.
Link: https://lore.kernel.org/r/20240325070944.3600338-5-dlemoal@kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
This code returns -EINVAL if "i" is out of bounds a few lines earlier.
Delete this unnecessary check and pull the code in a tab.
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/1ee32bfb-6f6c-4b61-887b-6f655abbfc47@moroto.mountain
Signed-off-by: Mark Brown <broonie@kernel.org>
Static checkers complain that the silicon_uid variable passed by
pointer to cs35l56_read_silicon_uid() could later be used
uninitialised when calling cs_amp_get_efi_calibration_data().
cs35l56_read_silicon_uid() must have succeeded to call
cs_amp_get_efi_calibration_data() and that would have populated the
variable.
However, initialise the value so we are not haunted by it forevermore.
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Fixes: e1830f66f6 ("ASoC: cs35l56: Add helper functions for amp calibration")
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20240422103211.236063-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Shenghao Ding <shenghao-ding@ti.com>:
mixer-test report:
root@am335x-evm:/bin# mixer-test
TAP version 13
# Card 0 - TI BeagleBone Black (TI BeagleBone Black)
1..455
ok 1 get_value.0.64
# 0.64 PCMD3180 i2c2 Profile id
ok 2 name.0.64
ok 3 write_default.0.64
ok 4 write_valid.0.64
ok 5 write_invalid.0.64
ok 6 event_missing.0.64
ok 7 event_spurious.0.64
ok 8 get_value.0.63
# 0.63 PCMD3180 i2c2 Dev3 Ch8 Digi Volume
ok 9 name.0.63
ok 10 write_default.0.63
ok 11 write_valid.0.63
ok 12 write_invalid.0.63
ok 13 event_missing.0.63
ok 14 event_spurious.0.63
ok 15 get_value.0.62
# 0.62 PCMD3180 i2c2 Dev3 Ch7 Digi Volume
ok 16 name.0.62
ok 17 write_default.0.62
ok 18 write_valid.0.62
ok 19 write_invalid.0.62
ok 20 event_missing.0.62
ok 21 event_spurious.0.62
ok 22 get_value.0.61
# 0.61 PCMD3180 i2c2 Dev3 Ch6 Digi Volume
ok 23 name.0.61
ok 24 write_default.0.61
ok 25 write_valid.0.61
ok 26 write_invalid.0.61
ok 27 event_missing.0.61
ok 28 event_spurious.0.61
ok 29 get_value.0.60
# 0.60 PCMD3180 i2c2 Dev3 Ch5 Digi Volume
ok 30 name.0.60
ok 31 write_default.0.60
ok 32 write_valid.0.60
ok 33 write_invalid.0.60
ok 34 event_missing.0.60
ok 35 event_spurious.0.60
ok 36 get_value.0.59
# 0.59 PCMD3180 i2c2 Dev3 Ch4 Digi Volume
ok 37 name.0.59
ok 38 write_default.0.59
ok 39 write_valid.0.59
ok 40 write_invalid.0.59
ok 41 event_missing.0.59
ok 42 event_spurious.0.59
ok 43 get_value.0.58
# 0.58 PCMD3180 i2c2 Dev3 Ch3 Digi Volume
ok 44 name.0.58
ok 45 write_default.0.58
ok 46 write_valid.0.58
ok 47 write_invalid.0.58
ok 48 event_missing.0.58
ok 49 event_spurious.0.58
ok 50 get_value.0.57
# 0.57 PCMD3180 i2c2 Dev3 Ch2 Digi Volume
ok 51 name.0.57
ok 52 write_default.0.57
ok 53 write_valid.0.57
ok 54 write_invalid.0.57
ok 55 event_missing.0.57
ok 56 event_spurious.0.57
ok 57 get_value.0.56
# 0.56 PCMD3180 i2c2 Dev3 Ch1 Digi Volume
ok 58 name.0.56
ok 59 write_default.0.56
ok 60 write_valid.0.56
ok 61 write_invalid.0.56
ok 62 event_missing.0.56
ok 63 event_spurious.0.56
ok 64 get_value.0.55
# 0.55 PCMD3180 i2c2 Dev3 Ch8 Fine Volume
ok 65 name.0.55
ok 66 write_default.0.55
ok 67 write_valid.0.55
ok 68 write_invalid.0.55
ok 69 event_missing.0.55
ok 70 event_spurious.0.55
ok 71 get_value.0.54
# 0.54 PCMD3180 i2c2 Dev3 Ch7 Fine Volume
ok 72 name.0.54
ok 73 write_default.0.54
ok 74 write_valid.0.54
ok 75 write_invalid.0.54
ok 76 event_missing.0.54
ok 77 event_spurious.0.54
ok 78 get_value.0.53
# 0.53 PCMD3180 i2c2 Dev3 Ch6 Fine Volume
ok 79 name.0.53
ok 80 write_default.0.53
ok 81 write_valid.0.53
ok 82 write_invalid.0.53
ok 83 event_missing.0.53
ok 84 event_spurious.0.53
ok 85 get_value.0.52
# 0.52 PCMD3180 i2c2 Dev3 Ch5 Fine Volume
ok 86 name.0.52
ok 87 write_default.0.52
ok 88 write_valid.0.52
ok 89 write_invalid.0.52
ok 90 event_missing.0.52
ok 91 event_spurious.0.52
ok 92 get_value.0.51
# 0.51 PCMD3180 i2c2 Dev3 Ch4 Fine Volume
ok 93 name.0.51
ok 94 write_default.0.51
ok 95 write_valid.0.51
ok 96 write_invalid.0.51
ok 97 event_missing.0.51
ok 98 event_spurious.0.51
ok 99 get_value.0.50
# 0.50 PCMD3180 i2c2 Dev3 Ch3 Fine Volume
ok 100 name.0.50
ok 101 write_default.0.50
ok 102 write_valid.0.50
ok 103 write_invalid.0.50
ok 104 event_missing.0.50
ok 105 event_spurious.0.50
ok 106 get_value.0.49
# 0.49 PCMD3180 i2c2 Dev3 Ch2 Fine Volume
ok 107 name.0.49
ok 108 write_default.0.49
ok 109 write_valid.0.49
ok 110 write_invalid.0.49
ok 111 event_missing.0.49
ok 112 event_spurious.0.49
ok 113 get_value.0.48
# 0.48 PCMD3180 i2c2 Dev3 Ch1 Fine Volume
ok 114 name.0.48
ok 115 write_default.0.48
ok 116 write_valid.0.48
ok 117 write_invalid.0.48
ok 118 event_missing.0.48
ok 119 event_spurious.0.48
ok 120 get_value.0.47
# 0.47 PCMD3180 i2c2 Dev2 Ch8 Digi Volume
ok 121 name.0.47
ok 122 write_default.0.47
ok 123 write_valid.0.47
ok 124 write_invalid.0.47
ok 125 event_missing.0.47
ok 126 event_spurious.0.47
ok 127 get_value.0.46
# 0.46 PCMD3180 i2c2 Dev2 Ch7 Digi Volume
ok 128 name.0.46
ok 129 write_default.0.46
ok 130 write_valid.0.46
ok 131 write_invalid.0.46
ok 132 event_missing.0.46
ok 133 event_spurious.0.46
ok 134 get_value.0.45
# 0.45 PCMD3180 i2c2 Dev2 Ch6 Digi Volume
ok 135 name.0.45
ok 136 write_default.0.45
ok 137 write_valid.0.45
ok 138 write_invalid.0.45
ok 139 event_missing.0.45
ok 140 event_spurious.0.45
ok 141 get_value.0.44
# 0.44 PCMD3180 i2c2 Dev2 Ch5 Digi Volume
ok 142 name.0.44
ok 143 write_default.0.44
ok 144 write_valid.0.44
ok 145 write_invalid.0.44
ok 146 event_missing.0.44
ok 147 event_spurious.0.44
ok 148 get_value.0.43
# 0.43 PCMD3180 i2c2 Dev2 Ch4 Digi Volume
ok 149 name.0.43
ok 150 write_default.0.43
ok 151 write_valid.0.43
ok 152 write_invalid.0.43
ok 153 event_missing.0.43
ok 154 event_spurious.0.43
ok 155 get_value.0.42
# 0.42 PCMD3180 i2c2 Dev2 Ch3 Digi Volume
ok 156 name.0.42
ok 157 write_default.0.42
ok 158 write_valid.0.42
ok 159 write_invalid.0.42
ok 160 event_missing.0.42
ok 161 event_spurious.0.42
ok 162 get_value.0.41
# 0.41 PCMD3180 i2c2 Dev2 Ch2 Digi Volume
ok 163 name.0.41
ok 164 write_default.0.41
ok 165 write_valid.0.41
ok 166 write_invalid.0.41
ok 167 event_missing.0.41
ok 168 event_spurious.0.41
ok 169 get_value.0.40
# 0.40 PCMD3180 i2c2 Dev2 Ch1 Digi Volume
ok 170 name.0.40
ok 171 write_default.0.40
ok 172 write_valid.0.40
ok 173 write_invalid.0.40
ok 174 event_missing.0.40
ok 175 event_spurious.0.40
ok 176 get_value.0.39
# 0.39 PCMD3180 i2c2 Dev2 Ch8 Fine Volume
ok 177 name.0.39
ok 178 write_default.0.39
ok 179 write_valid.0.39
ok 180 write_invalid.0.39
ok 181 event_missing.0.39
ok 182 event_spurious.0.39
ok 183 get_value.0.38
# 0.38 PCMD3180 i2c2 Dev2 Ch7 Fine Volume
ok 184 name.0.38
ok 185 write_default.0.38
ok 186 write_valid.0.38
ok 187 write_invalid.0.38
ok 188 event_missing.0.38
ok 189 event_spurious.0.38
ok 190 get_value.0.37
# 0.37 PCMD3180 i2c2 Dev2 Ch6 Fine Volume
ok 191 name.0.37
ok 192 write_default.0.37
ok 193 write_valid.0.37
ok 194 write_invalid.0.37
ok 195 event_missing.0.37
ok 196 event_spurious.0.37
ok 197 get_value.0.36
# 0.36 PCMD3180 i2c2 Dev2 Ch5 Fine Volume
ok 198 name.0.36
ok 199 write_default.0.36
ok 200 write_valid.0.36
ok 201 write_invalid.0.36
ok 202 event_missing.0.36
ok 203 event_spurious.0.36
ok 204 get_value.0.35
# 0.35 PCMD3180 i2c2 Dev2 Ch4 Fine Volume
ok 205 name.0.35
ok 206 write_default.0.35
ok 207 write_valid.0.35
ok 208 write_invalid.0.35
ok 209 event_missing.0.35
ok 210 event_spurious.0.35
ok 211 get_value.0.34
# 0.34 PCMD3180 i2c2 Dev2 Ch3 Fine Volume
ok 212 name.0.34
ok 213 write_default.0.34
ok 214 write_valid.0.34
ok 215 write_invalid.0.34
ok 216 event_missing.0.34
ok 217 event_spurious.0.34
ok 218 get_value.0.33
# 0.33 PCMD3180 i2c2 Dev2 Ch2 Fine Volume
ok 219 name.0.33
ok 220 write_default.0.33
ok 221 write_valid.0.33
ok 222 write_invalid.0.33
ok 223 event_missing.0.33
ok 224 event_spurious.0.33
ok 225 get_value.0.32
# 0.32 PCMD3180 i2c2 Dev2 Ch1 Fine Volume
ok 226 name.0.32
ok 227 write_default.0.32
ok 228 write_valid.0.32
ok 229 write_invalid.0.32
ok 230 event_missing.0.32
ok 231 event_spurious.0.32
ok 232 get_value.0.31
# 0.31 PCMD3180 i2c2 Dev1 Ch8 Digi Volume
ok 233 name.0.31
ok 234 write_default.0.31
ok 235 write_valid.0.31
ok 236 write_invalid.0.31
ok 237 event_missing.0.31
ok 238 event_spurious.0.31
ok 239 get_value.0.30
# 0.30 PCMD3180 i2c2 Dev1 Ch7 Digi Volume
ok 240 name.0.30
ok 241 write_default.0.30
ok 242 write_valid.0.30
ok 243 write_invalid.0.30
ok 244 event_missing.0.30
ok 245 event_spurious.0.30
ok 246 get_value.0.29
# 0.29 PCMD3180 i2c2 Dev1 Ch6 Digi Volume
ok 247 name.0.29
ok 248 write_default.0.29
ok 249 write_valid.0.29
ok 250 write_invalid.0.29
ok 251 event_missing.0.29
ok 252 event_spurious.0.29
ok 253 get_value.0.28
# 0.28 PCMD3180 i2c2 Dev1 Ch5 Digi Volume
ok 254 name.0.28
ok 255 write_default.0.28
ok 256 write_valid.0.28
ok 257 write_invalid.0.28
ok 258 event_missing.0.28
ok 259 event_spurious.0.28
ok 260 get_value.0.27
# 0.27 PCMD3180 i2c2 Dev1 Ch4 Digi Volume
ok 261 name.0.27
ok 262 write_default.0.27
ok 263 write_valid.0.27
ok 264 write_invalid.0.27
ok 265 event_missing.0.27
ok 266 event_spurious.0.27
ok 267 get_value.0.26
# 0.26 PCMD3180 i2c2 Dev1 Ch3 Digi Volume
ok 268 name.0.26
ok 269 write_default.0.26
ok 270 write_valid.0.26
ok 271 write_invalid.0.26
ok 272 event_missing.0.26
ok 273 event_spurious.0.26
ok 274 get_value.0.25
# 0.25 PCMD3180 i2c2 Dev1 Ch2 Digi Volume
ok 275 name.0.25
ok 276 write_default.0.25
ok 277 write_valid.0.25
ok 278 write_invalid.0.25
ok 279 event_missing.0.25
ok 280 event_spurious.0.25
ok 281 get_value.0.24
# 0.24 PCMD3180 i2c2 Dev1 Ch1 Digi Volume
ok 282 name.0.24
ok 283 write_default.0.24
ok 284 write_valid.0.24
ok 285 write_invalid.0.24
ok 286 event_missing.0.24
ok 287 event_spurious.0.24
ok 288 get_value.0.23
# 0.23 PCMD3180 i2c2 Dev1 Ch8 Fine Volume
ok 289 name.0.23
ok 290 write_default.0.23
ok 291 write_valid.0.23
ok 292 write_invalid.0.23
ok 293 event_missing.0.23
ok 294 event_spurious.0.23
ok 295 get_value.0.22
# 0.22 PCMD3180 i2c2 Dev1 Ch7 Fine Volume
ok 296 name.0.22
ok 297 write_default.0.22
ok 298 write_valid.0.22
ok 299 write_invalid.0.22
ok 300 event_missing.0.22
ok 301 event_spurious.0.22
ok 302 get_value.0.21
# 0.21 PCMD3180 i2c2 Dev1 Ch6 Fine Volume
ok 303 name.0.21
ok 304 write_default.0.21
ok 305 write_valid.0.21
ok 306 write_invalid.0.21
ok 307 event_missing.0.21
ok 308 event_spurious.0.21
ok 309 get_value.0.20
# 0.20 PCMD3180 i2c2 Dev1 Ch5 Fine Volume
ok 310 name.0.20
ok 311 write_default.0.20
ok 312 write_valid.0.20
ok 313 write_invalid.0.20
ok 314 event_missing.0.20
ok 315 event_spurious.0.20
ok 316 get_value.0.19
# 0.19 PCMD3180 i2c2 Dev1 Ch4 Fine Volume
ok 317 name.0.19
ok 318 write_default.0.19
ok 319 write_valid.0.19
ok 320 write_invalid.0.19
ok 321 event_missing.0.19
ok 322 event_spurious.0.19
ok 323 get_value.0.18
# 0.18 PCMD3180 i2c2 Dev1 Ch3 Fine Volume
ok 324 name.0.18
ok 325 write_default.0.18
ok 326 write_valid.0.18
ok 327 write_invalid.0.18
ok 328 event_missing.0.18
ok 329 event_spurious.0.18
ok 330 get_value.0.17
# 0.17 PCMD3180 i2c2 Dev1 Ch2 Fine Volume
ok 331 name.0.17
ok 332 write_default.0.17
ok 333 write_valid.0.17
ok 334 write_invalid.0.17
ok 335 event_missing.0.17
ok 336 event_spurious.0.17
ok 337 get_value.0.16
# 0.16 PCMD3180 i2c2 Dev1 Ch1 Fine Volume
ok 338 name.0.16
ok 339 write_default.0.16
ok 340 write_valid.0.16
ok 341 write_invalid.0.16
ok 342 event_missing.0.16
ok 343 event_spurious.0.16
ok 344 get_value.0.15
# 0.15 PCMD3180 i2c2 Dev0 Ch8 Digi Volume
ok 345 name.0.15
ok 346 write_default.0.15
ok 347 write_valid.0.15
ok 348 write_invalid.0.15
ok 349 event_missing.0.15
ok 350 event_spurious.0.15
ok 351 get_value.0.14
# 0.14 PCMD3180 i2c2 Dev0 Ch7 Digi Volume
ok 352 name.0.14
ok 353 write_default.0.14
ok 354 write_valid.0.14
ok 355 write_invalid.0.14
ok 356 event_missing.0.14
ok 357 event_spurious.0.14
ok 358 get_value.0.13
# 0.13 PCMD3180 i2c2 Dev0 Ch6 Digi Volume
ok 359 name.0.13
ok 360 write_default.0.13
ok 361 write_valid.0.13
ok 362 write_invalid.0.13
ok 363 event_missing.0.13
ok 364 event_spurious.0.13
ok 365 get_value.0.12
# 0.12 PCMD3180 i2c2 Dev0 Ch5 Digi Volume
ok 366 name.0.12
ok 367 write_default.0.12
ok 368 write_valid.0.12
ok 369 write_invalid.0.12
ok 370 event_missing.0.12
ok 371 event_spurious.0.12
ok 372 get_value.0.11
# 0.11 PCMD3180 i2c2 Dev0 Ch4 Digi Volume
ok 373 name.0.11
ok 374 write_default.0.11
ok 375 write_valid.0.11
ok 376 write_invalid.0.11
ok 377 event_missing.0.11
ok 378 event_spurious.0.11
ok 379 get_value.0.10
# 0.10 PCMD3180 i2c2 Dev0 Ch3 Digi Volume
ok 380 name.0.10
ok 381 write_default.0.10
ok 382 write_valid.0.10
ok 383 write_invalid.0.10
ok 384 event_missing.0.10
ok 385 event_spurious.0.10
ok 386 get_value.0.9
# 0.9 PCMD3180 i2c2 Dev0 Ch2 Digi Volume
ok 387 name.0.9
ok 388 write_default.0.9
ok 389 write_valid.0.9
ok 390 write_invalid.0.9
ok 391 event_missing.0.9
ok 392 event_spurious.0.9
ok 393 get_value.0.8
# 0.8 PCMD3180 i2c2 Dev0 Ch1 Digi Volume
ok 394 name.0.8
ok 395 write_default.0.8
ok 396 write_valid.0.8
ok 397 write_invalid.0.8
ok 398 event_missing.0.8
ok 399 event_spurious.0.8
ok 400 get_value.0.7
# 0.7 PCMD3180 i2c2 Dev0 Ch8 Fine Volume
ok 401 name.0.7
ok 402 write_default.0.7
ok 403 write_valid.0.7
ok 404 write_invalid.0.7
ok 405 event_missing.0.7
ok 406 event_spurious.0.7
ok 407 get_value.0.6
# 0.6 PCMD3180 i2c2 Dev0 Ch7 Fine Volume
ok 408 name.0.6
ok 409 write_default.0.6
ok 410 write_valid.0.6
ok 411 write_invalid.0.6
ok 412 event_missing.0.6
ok 413 event_spurious.0.6
ok 414 get_value.0.5
# 0.5 PCMD3180 i2c2 Dev0 Ch6 Fine Volume
ok 415 name.0.5
ok 416 write_default.0.5
ok 417 write_valid.0.5
ok 418 write_invalid.0.5
ok 419 event_missing.0.5
ok 420 event_spurious.0.5
ok 421 get_value.0.4
# 0.4 PCMD3180 i2c2 Dev0 Ch5 Fine Volume
ok 422 name.0.4
ok 423 write_default.0.4
ok 424 write_valid.0.4
ok 425 write_invalid.0.4
ok 426 event_missing.0.4
ok 427 event_spurious.0.4
ok 428 get_value.0.3
# 0.3 PCMD3180 i2c2 Dev0 Ch4 Fine Volume
ok 429 name.0.3
ok 430 write_default.0.3
ok 431 write_valid.0.3
ok 432 write_invalid.0.3
ok 433 event_missing.0.3
ok 434 event_spurious.0.3
ok 435 get_value.0.2
# 0.2 PCMD3180 i2c2 Dev0 Ch3 Fine Volume
ok 436 name.0.2
ok 437 write_default.0.2
ok 438 write_valid.0.2
ok 439 write_invalid.0.2
ok 440 event_missing.0.2
ok 441 event_spurious.0.2
ok 442 get_value.0.1
# 0.1 PCMD3180 i2c2 Dev0 Ch2 Fine Volume
ok 443 name.0.1
ok 444 write_default.0.1
ok 445 write_valid.0.1
ok 446 write_invalid.0.1
ok 447 event_missing.0.1
ok 448 event_spurious.0.1
ok 449 get_value.0.0
# 0.0 PCMD3180 i2c2 Dev0 Ch1 Fine Volume
ok 450 name.0.0
ok 451 write_default.0.0
ok 452 write_valid.0.0
ok 453 write_invalid.0.0
ok 454 event_missing.0.0
ok 455 event_spurious.0.0
# Totals: pass:455 fail:0 xfail:0 xpass:0 skip:0 error:0
Merge series from Seven Lee <wtli@nuvoton.com>:
Change the original fixed delay to the assignment from the property. It
will make it more flexible to different platforms to avoid pop noise at
the beginning of recording.
Merge series from Cezary Rojewski <cezary.rojewski@intel.com>:
The change is based on rafael/acpi-nhlt [1] immutable branch which
Rafael kindly prepared for me. Without the topmost changes to ACPI/NHLT,
the patches present will fail to compile.
Recent changes for the ACPI tree [2] refactored interfaces of the NHLT
table. Currently we have two implementations - one found in acpi
subsystem (unused) and one in sound/hda/. As NHLT is part of ACPI, idea
is to make the former useful and then switch all users of existing
sound/hda/intel-nhlt.c to this new interface over time and remove the
duplicate afterward.
[1]: https://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm.git/?h=acpi-nhlt
[2]: https://lore.kernel.org/linux-acpi/20240319083018.3159716-1-cezary.rojewski@intel.com/
Now that NHLT support in ACPI framework was introduced, migrate avs
driver to new API.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20240419084307.2718881-3-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
PCM6240 driver implements a flexible and configurable setting for register
and filter coefficients, to one, two or even multiple PCM6240 Family Audio
chips.
Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>
Link: https://lore.kernel.org/r/20240407091846.1299-4-shenghao-ding@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
PCM6240 driver implements a flexible and configurable setting for register
and filter coefficients, to one, two or even multiple PCM6240 Family Audio
chips.
Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>
Link: https://lore.kernel.org/r/20240407091846.1299-3-shenghao-ding@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
PCM6240 driver implements a flexible and configurable setting for register
and filter coefficients, to one, two or even multiple PCM6240 Family Audio
chips.
Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>
Link: https://lore.kernel.org/r/20240407091846.1299-2-shenghao-ding@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
To make the widget debugfs files more informative, add a line showing the
widget type string.
Keeping backward compatibility is nice to have being debugfs, and ease of
parsing by both humans and software is also good. To maximize both with a
reasonable effort add a new line without thouching the already complex
format of the first line. The syntax is meant to be a key/value pair.
The existing vizdapm tool continues working after this change, ignoring the
new line.
The new format is:
Left ADC: Off in 1 out 0 - R2(0x2) mask 0x2
stream Left HiFi Capture inactive
widget-type adc
out "static" "Capture" "cs42l51.0-004a"
in "static" "Left PGA" "cs42l51.0-004a"
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20240416-vizdapm-ng-v1-2-5d33c0b57bc5@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
debugfs entries for DAPM widgets have the following form:
Left ADC: Off in 1 out 0 - R2(0x2) mask 0x2
stream Left HiFi Capture inactive
out "static" "Capture"
in "static" "Left PGA"
Lines with the "in" and "out" prefixes describe routes from/to other
widgets presenting the path name and the connected widget name.
This is ambiguous in case of cards having multiple widgets with the same
name in different components. For example the STM32MP157A-DK1 board
(arch/arm/boot/dts/st/stm32mp15xx-dkx.dtsi) has a "Capture" widget in both
the "cs42l51.0-004a" and the "hdmi-audio-codec.1.auto" components.
Avoid the ambiguity by adding the component name to the "in" and "out"
lines. Add the new field at the end to minimize backward compatibility
issues. The existing vizdapm tool continues working after this change.
The output becomes:
Left ADC: Off in 1 out 0 - R2(0x2) mask 0x2
stream Left HiFi Capture inactive
out "static" "Capture" "cs42l51.0-004a"
in "static" "Left PGA" "cs42l51.0-004a"
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20240416-vizdapm-ng-v1-1-5d33c0b57bc5@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
