Some Sound Card might need special trigger ordering which is based on
CPU/Codec connection. It is already supported on ASoC, but Audio Graph
Card2 still not yet support it. Let's support it.
Cc: Maxim Kochetkov <fido_max@inbox.ru>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87msnqzoj8.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Some Sound Card might need special trigger ordering which is based on
CPU/Codec connection. It is already supported on ASoC, but Audio Graph
Card still not yet support it. Let's support it.
Cc: Maxim Kochetkov <fido_max@inbox.ru>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87o786zojd.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Some Sound Card might need special trigger ordering which is based on
CPU/Codec connection. It is already supported on ASoC, but Simple Audio
Card still not yet support it. Let's support it.
Cc: Maxim Kochetkov <fido_max@inbox.ru>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87plsmzojk.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Some Sound Card might need special trigger ordering which is based on
CPU/Codec connection. It is already supported on ASoC, but Simple Audio
Card / Audio Graph Card still not support it. Let's support it.
Cc: Maxim Kochetkov <fido_max@inbox.ru>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87r0d2zojq.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Replace 'int' with proper 'enum lpass_codec_version' in every place
which handles the parsed codec version (not raw register values!) to be
explicit about contents of the variable. This makes code easier to read
and compilers could check missing switch cases.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patch.msgid.link/20240625165736.722106-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Qualcomm LPASS macro codec driver parses registers in order to
detect version of the codec. It recognizes codecs v2.0 - v2.8, however
we know that there are earlier versions and 'enum lpass_codec_version'
has also v1.0, v1.1 and v1.2. If by any chance we run on unrecognized
version, driver will use random value from the stack as the codec
version.
Fix it by mapping such cases to an enum of value 0:
LPASS_CODEC_VERSION_UNKNOWN.
Fixes: 378918d591 ("ASoC: codecs: lpass-macro: add helpers to get codec version")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patch.msgid.link/20240625165736.722106-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Modify register setting sequence of enabling inline command
to fix issue of random interrupt from push-button.
Signed-off-by: Jack Yu <jack.yu@realtek.com>
Link: https://patch.msgid.link/9a7a3a66cbcb426487ca6f558f45e922@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Starting with v2.5 of Qualcomm LPASS Codec, few registers in the WSA
macro block change. Bring proper support for this v2.5 and newer
versions, to fix second speaker playback (speaker was silent).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patch.msgid.link/20240625-qcom-audio-wsa-second-speaker-v1-3-f65ffdfc368c@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The driver for Qualcomm LPASS WSA macro codec was developed and tested
on codec v2.1, however v2.5 has significant changes in the registers.
The driver correctly works for v2.1 codec, but has issues when running
on SoC with v2.5 codec (so starting with SM8450, even though playback
works properly on that SoC).
Prepare the driver for handling differences in register layouts of newer
version. This does not have functional impact on older codec versions,
but just:
1. Renames few soc_enums and widgets as v2.1,
2. For registers being different in v2.5, moves the defaults and regmap
configuration to new structures,
3. Adds new 'struct wsa_reg_layout' with offsets and masks for few
registers, so most of the code can stay unchaged on v2.5,
4. Chooses proper widgets, regmap config and register layout based on
version of the codec.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patch.msgid.link/20240625-qcom-audio-wsa-second-speaker-v1-2-f65ffdfc368c@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The Vivobook S 16X IPS needs a quirks-table entry for the internal microphone to function properly.
Signed-off-by: Vyacheslav Frantsishko <itmymaill@gmail.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://patch.msgid.link/20240626070334.45633-1-itmymaill@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The SDCA spec defines a 'selected_mode' control which can override
the 'detected_mode' reported by hardware.
This is useful for platform integration as well as in cases
where the hardware(e.g. 3.5mm jack cable) is not able to accurately detect the jack type.
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Tested-by: yung-chuan.liao@linux.intel.com
Link: https://patch.msgid.link/20240625084303.2273911-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We have also v2.1 version of the codec (see 'enum lpass_codec_version'),
so handle it as well in all switch cases.
Fixes: dbacef0589 ("ASoC: codec: lpass-rx-macro: prepare driver to accomdate new codec versions")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://patch.msgid.link/20240625160614.450506-1-krzysztof.kozlowski@linaro.org
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
These drivers don't use the driver_data member of struct i2c_device_id,
so don't explicitly initialize this member.
This prepares putting driver_data in an anonymous union which requires
either no initialization or named designators. But it's also a nice
cleanup on its own.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://patch.msgid.link/20240624131728.1244053-2-u.kleine-koenig@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Zhang Yi <zhangyi@everest-semi.com>:
We propose four patches to solve headphone detection and suspend issues.
And there are several registers that should be read-only registers. So
we create es8326_writeable_register, and set these registers to false.
Add a helper function max_98373_get_tx_mask() to get tx mask from
max98373 ACPI device properties at runtime.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://patch.msgid.link/20240624121119.91552-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Experimental tests show that JD2_100K is required, otherwise the jack
is detected always even with nothing plugged-in.
To avoid matching with other known quirks the SKU information is used.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://patch.msgid.link/20240624121119.91552-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add name_prefix as the prefix name of firmwares and
kcontrol to support corresponding TAS2563/TAS2781s.
name_prefix is not mandatory.
Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>
Link: https://patch.msgid.link/20240621132309.564-1-shenghao-ding@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
It is incorrect to request the input pin format of the destination widget
using the output pin index of the source module as the indexes are not
necessarily matching.
moduleA.out_pin1 can be connected to moduleB.in_pin0 for example.
Use the dst_queue_id to request the input format of the destination module.
This bug remained unnoticed likely because in nocodec topologies we don't
have process modules after a module copier, thus the pin/queue index is
ignored.
For the process module case, the code was likely have been tested in a
controlled way where all the pin/queue/format properties were present to
work.
Update the debug prints to have better information.
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Cc: stable@vger.kernel.org # v6.8+
Link: https://patch.msgid.link/20240624121519.91703-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There are two hardware connection methods for DMICs on the MT6358. In cases
where more than two DMICs are used, we need to time-multiplex these DMICs.
Therefore, we need to dynamically switch the modes of these DMICs based on
the actual usage scenarios.
---- DMIC1
AU_VIN0 ---
---- DMIC2
AU_VIN2 --- ----DMIC3
When we want to use DMIC1/2, configure it to one-wire mode. When we want to
use DMIC1/3, configure it to two-wire mode.
Signed-off-by: Jiaxin Yu <jiaxin.yu@mediatek.com>
Link: https://patch.msgid.link/20240613020725.27874-1-jiaxin.yu@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We modified the regmap_config members to fix cach sync error.
There are several registers that should be read-only registers.
If these registers are written while synchronizing the register values,
the codec will enter an error state.So we create es8326_writeable_register,
and set these registers to false
Signed-off-by: Zhang Yi <zhangyi@everest-semi.com>
Link: https://patch.msgid.link/20240624030607.4307-5-zhangyi@everest-semi.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Executing regcache_sync at initialization, we can hear a gentle pop
noise. So we created es8326_init for initialization instead of
executing es8326_resume
Signed-off-by: Zhang Yi <zhangyi@everest-semi.com>
Link: https://patch.msgid.link/20240624030607.4307-4-zhangyi@everest-semi.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We modified the headphone detection setting to avoid an error button state
after codec resume from suspend state
Signed-off-by: Zhang Yi <zhangyi@everest-semi.com>
Link: https://patch.msgid.link/20240624030607.4307-2-zhangyi@everest-semi.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Commit e70b8dd267 ("ASoC: mediatek: mt8195: Remove afe-dai component
and rework codec link") removed the codec entry for the ETDM1_OUT_BE
dai link entirely instead of replacing it with COMP_EMPTY(). This worked
by accident as the remaining COMP_EMPTY() platform entry became the codec
entry, and the platform entry became completely empty, effectively the
same as COMP_DUMMY() since snd_soc_fill_dummy_dai() doesn't do anything
for platform entries.
This causes a KASAN out-of-bounds warning in mtk_soundcard_common_probe()
in sound/soc/mediatek/common/mtk-soundcard-driver.c:
for_each_card_prelinks(card, i, dai_link) {
if (adsp_node && !strncmp(dai_link->name, "AFE_SOF", strlen("AFE_SOF")))
dai_link->platforms->of_node = adsp_node;
else if (!dai_link->platforms->name && !dai_link->platforms->of_node)
dai_link->platforms->of_node = platform_node;
}
where the code expects the platforms array to have space for at least one entry.
Add an COMP_EMPTY() entry so that dai_link->platforms has space.
Fixes: e70b8dd267 ("ASoC: mediatek: mt8195: Remove afe-dai component and rework codec link")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patch.msgid.link/20240624061257.3115467-1-wenst@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Andrejs Cainikovs <andrejs.cainikovs@gmail.com>:
This change adds local MCLK handling, which would cover a case when a
reference audio clock is present in a system, but is not allowed to be
changed, see [1].
[1]: https://lore.kernel.org/all/ZfBdxrzX3EnPuGOn@ediswmail9.ad.cirrus.com/
Merge series from Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>:
Make few pointers in ASoC functions as pointers to const, so the code is
clearer to read, a bit safer and allows further constifications (e.g.
placing some data as rodata).
Merge series from Christian Hewitt <christianshewitt@gmail.com>:
Update bindings and add a driver compatible for the pcm5242
chip used on the Odroid HiFi-Shield2 i2c mezzanine board.
Merge series from Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>:
Set of simple cleanups from similar issues in all Qualcomm WCD93xx
codecs.
The first patch "ASoC: codecs: wcd-mbhc: Constify passed MBHC reg
fields" is a requirement for few others, but except this they are
independent.
Merge series from Ricard Wanderlof <ricard.wanderlof@axis.com>:
In some cases, depending on system design, the MICBIAS pins on the
chip are not needed as such, but a couple of extra GPIO pins would be
useful. This patch allows the MICBIAS pins to be configured in the
device tree as general purpose output pins, controlled via the GPIO
framework.
Owing to their originally intended purpose there are some limitations:
when the MICBIAS pins are deactivated, they will float, so will likely
need a pulldown in many applications. When activated, they will
assume the voltage specified by the micbias1-vg and micbias2-vg
properties, respectively, meaning that the resulting output voltage
will be 2.0 V, 2.5 V or AVDD .
Merge series from Paul Handrigan <paulha@opensource.cirrus.com>:
This patchset provides ASoC support for the latest family
of Cirrus Logic multichannel, high performance audio ADCs.
The devices that are supported are CS5302 (2 channel ADC),
CS5304 (4 channel ADC), and CS5308 (8 channel ADC).
The value “-ENOMEM” was assigned to the local variable “ret”
in one if branch after a devm_kzalloc() call failed at the beginning.
This error code will trigger then a pcmdevice_remove() call with a passed
null pointer so that an undesirable dereference will be performed.
Thus return the appropriate error code directly.
Fixes: 1324eafd37 ("ASoc: PCM6240: Create PCM6240 Family driver code")
Signed-off-by: Hao Ge <gehao@kylinos.cn>
Link: https://patch.msgid.link/20240617020954.17252-1-hao.ge@linux.dev
Signed-off-by: Mark Brown <broonie@kernel.org>
ACP common dma driver has a buffer size and period size restriction
which should be 64 byte aligned. Add pcm constraints for the same.
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://patch.msgid.link/20240617072844.871468-8-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
I2S clock generation registers should be programmed before starting the I2S
dma when I2S controller is programmed as clock master. Move i2s clock
generation register programming sequence prior to i2s dma start.
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://patch.msgid.link/20240617072844.871468-7-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
ACP provides different IO configurations(ACP PDM, I2S and SoundWire).
I2S mclk should be programmed only when I2S configuration is selected and
I2S controller is programmed as clock master.
Modify the conditional check for programming i2s mclk.
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://patch.msgid.link/20240617072844.871468-6-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In acp_i2s_probe(), acp_base null check is verified.
As already acp_base null check will be verified in acp platform
driver probe sequence, additional NULL check in acp_i2s_probe() is not
needed. Remove acp_i2s_probe() function.
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://patch.msgid.link/20240617072844.871468-4-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
priv->pdev pointer was set after being used in
fsl_asoc_card_audmux_init().
Move this assignment at the start of the probe function, so
sub-functions can correctly use pdev through priv.
fsl_asoc_card_audmux_init() dereferences priv->pdev to get access to the
dev struct, used with dev_err macros.
As priv is zero-initialised, there would be a NULL pointer dereference.
Note that if priv->dev is dereferenced before assignment but never used,
for example if there is no error to be printed, the driver won't crash
probably due to compiler optimisations.
Fixes: 708b4351f0 ("ASoC: fsl: Add Freescale Generic ASoC Sound Card with ASRC support")
Signed-off-by: Elinor Montmasson <elinor.montmasson@savoirfairelinux.com>
Link: https://patch.msgid.link/20240620132511.4291-2-elinor.montmasson@savoirfairelinux.com
Signed-off-by: Mark Brown <broonie@kernel.org>
chip->flag variable assignment will be skipped when acp platform device
creation is skipped. In this case chip>flag value will not be set.
chip->flag variable should be assigned along with other structure
variables for 'chip' structure. Move chip->flag variable assignment
prior to acp platform device creation.
Fixes: 3a94c8ad0a ("ASoC: amd: acp: add code for scanning acp pdm controller")
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://msgid.link/r/20240617072844.871468-3-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
ACP supports different pin configurations for I2S IO. Checking ACP pin
configuration value against specific value breaks the functionality for
other I2S pin configurations. This check is no longer required in i2s dai
driver probe call as i2s configuration check will be verified during acp
platform device creation sequence.
Remove i2s_mode check in acp_i2s_probe() function.
Fixes: b24484c18b ("ASoC: amd: acp: ACP code generic to support newer platforms")
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://msgid.link/r/20240617072844.871468-2-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When acp platform device creation is skipped, chip->chip_pdev value will
remain NULL. Add NULL check for chip->chip_pdev structure in
snd_acp_resume() function to avoid null pointer dereference.
Fixes: 088a40980e ("ASoC: amd: acp: add pm ops support for acp pci driver")
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://msgid.link/r/20240617072844.871468-1-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support for the Asahi Kasei AK4619 audio codec.
[Kuninori cleanuped and adjusted to upstream code]
Signed-off-by: Khanh Le <khanh.le.xr@renesas.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://msgid.link/r/87iky5wxvr.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
IRQ lookup functions such as those in ACPI can return error values when
an IRQ is not defined. The i2c core driver converts the error codes to a
value of 0 and the SPI bus driver passes them unaltered to client device
drivers.
The cs35l56 driver should only accept positive non-zero values as IRQ
numbers.
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Fixes: 8a731fd37f ("ASoC: cs35l56: Move utility functions to shared file")
Link: https://msgid.link/r/20240617135338.82006-1-simont@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Dell SKU 0C64 has a single rt1318 amplifier.
The prefix name of control still needs to be set rt1318-1 corresponding to UCM config.
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://msgid.link/r/20240612075740.1678082-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Driver does not modify static wcd939x_sdw_ch_info array, so it can be
made const for code safety.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://msgid.link/r/20240612-asoc-wcd9xxx-wide-cleanups-v1-21-0d15885b2a06@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Driver does not modify few static data (MBHC reg fields, IRQ chip), so
make them const for code safety.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://msgid.link/r/20240612-asoc-wcd9xxx-wide-cleanups-v1-20-0d15885b2a06@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
wcd934x_codec_parse_data() function is called only from probe(), so
printing errors on resource acquisition is discouraged, because it can
pollute dmesg in case of probe deferral. The actual deferral is here
unlikely, but still the code is a bit simpler with dev_err_probe().
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://msgid.link/r/20240612-asoc-wcd9xxx-wide-cleanups-v1-10-0d15885b2a06@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Driver stores the voltage of mic bias in fields in state container
structure, but actually never reads them - except for the mic2 bias
(micb2_mv field). Drop the fields from the structure so the code will
be a bit simpler.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://msgid.link/r/20240612-asoc-wcd9xxx-wide-cleanups-v1-9-0d15885b2a06@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Driver does not modify few static data (arrays with sample rates, MBHC
reg fields, regmap config), so make them const for code safety.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://msgid.link/r/20240612-asoc-wcd9xxx-wide-cleanups-v1-8-0d15885b2a06@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Driver was prepared to adjust DMIC microphone parameters according to
DMIC clock rate which is read from platform data or Devicetree. The
latter part never happened, so the code is always called with
dmic_clk_rate=0, prints error and uses default/fallback values. All
this part can be simplified by dropping dead parts of code.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://msgid.link/r/20240612-asoc-wcd9xxx-wide-cleanups-v1-6-0d15885b2a06@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Error-level should not be used as debugging. The code (function
wcd9335_get_dmic_clk_val()) will always be called with same parameters,
so this is not really useful debug anyway, so drop it.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://msgid.link/r/20240612-asoc-wcd9xxx-wide-cleanups-v1-5-0d15885b2a06@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
wcd9335_parse_dt() function is called only from probe(), so printing
errors on resource acquisition is discouraged, because it can pollute
dmesg. Use dev_err_probe() to fix this and also make the code a bit
simpler.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://msgid.link/r/20240612-asoc-wcd9xxx-wide-cleanups-v1-4-0d15885b2a06@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Driver does not modify few static data (arrays with sample rates,
interrupt description, regmap config), so make them const for code
safety.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://msgid.link/r/20240612-asoc-wcd9xxx-wide-cleanups-v1-3-0d15885b2a06@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The wcd-mbhc-v2 helper code/module does not modify passed array of
registry fields, thus it can be made const for code safety. It will
also allow individual drivers to allocate the array in rodata.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://msgid.link/r/20240612-asoc-wcd9xxx-wide-cleanups-v1-1-0d15885b2a06@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
In only loading RCA (Reconfigurable Architecture) binary case, no DSP
program will be working inside tas2563/tas2781, that is dsp-bypass mode,
do not support speaker protection, or audio acoustic algorithms in this
mode.
Fixes: ef3bcde75d ("ASoC: tas2781: Add tas2781 driver")
Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240614133646.910-1-shenghao-ding@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This change adds MCLK clock handling directly within driver.
When used in combination with simple-audio-card, and mclk-fs is set,
simple-audio-card will change MCLK frequency before configuring PLL.
In some cases, however, MCLK reference clock should be static (see [1]),
which means it needs to be moved away from simple-audio-card.
[1]: https://lore.kernel.org/all/ZfBdxrzX3EnPuGOn@ediswmail9.ad.cirrus.com/
Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
Link: https://msgid.link/r/20240613084652.13113-4-andrejs.cainikovs@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Following bias state machine logic this bit is set twice before playback.
This change makes sure this bit set is set only once.
Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
Suggested-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com>
Link: https://msgid.link/r/20240613084652.13113-3-andrejs.cainikovs@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Next commit in series makes a change which calls nau8822_set_pll() from
nau8822_set_dai_sysclk(). Moving latter after the former would avoid a
forward declaration, and this is exactly what this change does.
Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
Link: https://msgid.link/r/20240613084652.13113-2-andrejs.cainikovs@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add boolean ti,micbias1-gpo and ti,micbias2-gpo devicetree properties.
When set, the respective MICBIAS pins can be used as general purpose
outputs controlled via the GPIO framework, in addition to the two
configurable GPIO pins.
This is useful in applications where the MICBIAS functionality is
not required, but it is useful to have a couple of extra GPIO pins.
The voltage on the respective MICBIAS pin in the active state is
governed by the ti,micbias1-vg and ti,micbias2-vg properties,
respectively (same properties as when the pins are used as
MICBIAS pins).
Signed-off-by: Ricard Wanderlof <ricard.wanderlof@axis.com>
Link: https://msgid.link/r/20240607-tlv320adc3xxx-micbias-gpo-v3-2-59dbec8b98f4@axis.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support for handling jack events of USB (DisplayPort).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Tested-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> # X13s
Link: https://msgid.link/r/20240606104922.114229-5-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support for Display Port Jack events.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Tested-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> # X13s
Link: https://msgid.link/r/20240606104922.114229-4-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a common function to add Display port jack.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Tested-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> # X13s
Link: https://msgid.link/r/20240606104922.114229-3-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Returned 'struct snd_soc_pcm_stream' by snd_soc_dai_get_pcm_stream() is
not modified by the users, so it can be changed as pointer to const.
This is a necessary step towards making the 'dai->driver' a pointer to
const.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://msgid.link/r/20240617-n-asoc-const-auto-selectable-formats-v1-5-8004f346ee38@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
get_channel_map() is supposed to obtain map of channels without
modifying the state of the given DAI, so make the pointer to 'struct
snd_soc_dai' as pointing to const.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://msgid.link/r/20240617-n-asoc-const-auto-selectable-formats-v1-4-8004f346ee38@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Several ASoC functions receive pointers to data which is not modified,
e.g. pointers to 'snd_soc_dai', 'snd_soc_pcm_runtime',
'snd_pcm_hw_params' and 'snd_soc_dai_link'.
All these pointers can be made as a pointer to const. This makes code
safer, serves as clear annotation of function's intentions (no ownership
passed to the function, no modifications) and allows putting pointed
structures in rodata (if ever applicable).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://msgid.link/r/20240617-n-asoc-const-auto-selectable-formats-v1-3-8004f346ee38@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The static arrays passed as 'auto_selectable_formats' are not modified
by the drivers nor by the core code, so make it const for code safety.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Herve Codina <herve.codina@bootlin.com>
Link: https://msgid.link/r/20240617125735.582963-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Add device tree property to define auxiliary devices to be added to
Audio Graph Card which is already supported on Simle Card.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://msgid.link/r/878qz4ry81.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
'struct mtk_adsp_ipc_ops' is not modified in these drivers.
Constifying this structure moves some data to a read-only section, so
increase overall security.
In order to do it, "struct mtk_adsp_ipc" also needs to be adjusted to this
new const qualifier.
On a x86_64, with allmodconfig:
Before:
======
text data bss dec hex filename
15533 2383 0 17916 45fc sound/soc/sof/mediatek/mt8195/mt8195.o
After:
=====
text data bss dec hex filename
15557 2367 0 17924 4604 sound/soc/sof/mediatek/mt8195/mt8195.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://msgid.link/r/a45d6b2b5ec040ea0fc78fca662c2dca3f13a49f.1718312321.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Mark Brown <broonie@kernel.org>
With ARCH=arm, make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in sound/soc/fsl/imx-pcm-fiq.o
Add the missing invocation of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://msgid.link/r/20240616-md-arm-sound-soc-fsl-v2-1-228772e81a54@quicinc.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Srinivas Kandagatla <srinivas.kandagatla@linaro.org>:
This patchset adds support to reading codec version and also adds
support for v2.5 codec version in rx macro.
LPASS 2.5 and up versions have changes in some of the rx blocks which
are required to get headset functional correctly.
Tested this on SM8450, X13s and x1e80100 crd.
This changes also fixes issue with sm8450, sm8550, sm8660 and x1e80100.
LPASS Codec v2.5 has significant changes in the rx register strides.
Due to this headset playback on SM8550, SM8650, x1e80100 and all SoCs
after SM8450 have only Left working.
This patch adjusts the registers to accomdate 2.5 changes. With this
fixed now L and R are functional on Headset playback.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Tested-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-HDK
Link: https://lore.kernel.org/r/20240612-lpass-codec-v25-v4-3-f63d3676dbc4@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
LPASS Codec v2.5 has significant changes in the rx block register strides.
This is a preparatory patch to do the required changes in the existing driver
to be able to accomdate these changes.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Tested-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-HDK
Link: https://lore.kernel.org/r/20240612-lpass-codec-v25-v4-2-f63d3676dbc4@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
LPASS Digital codec have changes in register layout across multiple
versions. Add a proper way read the codec version allowint all the lpass
macro drivers (tx, rx, wsa, va) to configure the registers correctly.
LPASS VA macro has the required registers to read the codec version.
Read the the version and make it available to other lpass codec macros
using the common helper functions.
Existing method of using LPASS IP version is not accurate as the same
the codec versioning is totally independent of LPASS IP block versions.
These helper functions should be able to provide a convient way to get
the codec version, and will help scale the drivers in right direction.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Tested-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-HDK
Link: https://lore.kernel.org/r/20240612-lpass-codec-v25-v4-1-f63d3676dbc4@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
There is an issue around with error handling and graph management with
the exising code, none of the error paths close the graph, which result in
leaving the loaded graph in dsp, however the driver thinks otherwise.
This can have a nasty side effect specially when we try to load the same
graph to dsp, dsp returns error which leaves the board with no sound and
requires restart.
Fix this by properly closing the graph when we hit errors between
open and close.
Fixes: 30ad723b93 ("ASoC: qdsp6: audioreach: add q6apm lpass dai support")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> # X13s
Link: https://lore.kernel.org/r/20240613-q6apm-fixes-v1-1-d88953675ab3@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
If the ASP1 DAI is hooked up by the machine driver the ASP TX mixer
sources should be initialized to disconnected. There aren't currently
any available products using the ASP so this doesn't affect any
existing systems.
The cs35l56 does not have any fixed default for the mixer source
registers. When the cs35l56 boots, its firmware patches these registers
to setup a system-specific routing; this is so that Windows can use
generic SDCA drivers instead of needing knowledge of chip-specific
registers. The setup varies between end-products, which each have
customized firmware, and so the default register state varies between
end-products. It can also change if the firmware on an end-product is
upgraded - for example if a change was needed to the routing for Windows
use-cases. It must be emphasized that the settings applied by the
firmware are not internal magic tuning; they are statically implementing
use-case setup that on Linux would be done via ALSA controls.
The driver is currently syncing the mixer controls with whatever
initial state the firmware wrote to the registers, so that they report
the actual audio routing. But if the ASP DAI is hooked up this can create
a powered-up DAPM graph without anything intentionally setting up a path.
This can lead to parts of the audio system powering up unexpectedly.
For example when cs35l56 is connected to cs42l43 using a codec-codec link,
this can create a complete DAPM graph which then powers-up cs42l43. But
the cs42l43 can only be clocked from its SoundWire bus so this causes a
bunch of errors in the kernel log where cs42l43 is unexpectedly powered-up
without a clock.
If the host is taking ownership of the ASP (either directly or as a
codec-to-codec link) there is no need to keep the mixer settings that the
firmware wrote. The driver has ALSA controls for setting these using
standard Linux mechanisms. So if the machine driver hooks up the ASP the
ASP mixers are initialized to "None" (no input). This prevents unintended
DAPM-graph power-ups, and means the initial state of the mixers is
always going to be None.
Since the initial state of the mixers can vary from system to system and
potentially between firmware upgrades, no use-case manager can currently
assume that cs35l56 has a known initial state. The firmware could just as
easily default them to "None" as to any input source. So defaulting them
to "None" in the driver is not increasing the entropy of the system.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20240613132527.46537-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In the quest to make struct device constant, start by making
to_auxiliary_drv() return a constant pointer so that drivers that call
this can be fixed up before the driver core changes.
As the return type previously was not constant, also fix up all callers
that were assuming that the pointer was not going to be a constant one
in order to not break the build.
Cc: Dave Ertman <david.m.ertman@intel.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Rafael J. Wysocki <rafael@kernel.org>
Cc: Bingbu Cao <bingbu.cao@intel.com>
Cc: Tianshu Qiu <tian.shu.qiu@intel.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Michael Chan <michael.chan@broadcom.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Jesse Brandeburg <jesse.brandeburg@intel.com>
Cc: Tony Nguyen <anthony.l.nguyen@intel.com>
Cc: Saeed Mahameed <saeedm@nvidia.com>
Cc: Leon Romanovsky <leon@kernel.org>
Cc: Tariq Toukan <tariqt@nvidia.com>
Cc: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Cc: Bard Liao <yung-chuan.liao@linux.intel.com>
Cc: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Cc: Daniel Baluta <daniel.baluta@nxp.com>
Cc: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: linux-media@vger.kernel.org
Cc: netdev@vger.kernel.org
Cc: intel-wired-lan@lists.osuosl.org
Cc: linux-rdma@vger.kernel.org
Cc: sound-open-firmware@alsa-project.org
Cc: linux-sound@vger.kernel.org
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> # drivers/media/pci/intel/ipu6
Acked-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Martin Habets <habetsm.xilinx@gmail.com>
Link: https://lore.kernel.org/r/20240611130103.3262749-7-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
With ARCH=x86, make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in sound/soc/amd/renoir/snd-acp3x-rn.o
WARNING: modpost: missing MODULE_DESCRIPTION() in sound/soc/amd/yc/snd-soc-acp6x-mach.o
WARNING: modpost: missing MODULE_DESCRIPTION() in sound/soc/amd/acp/snd-acp-i2s.o
WARNING: modpost: missing MODULE_DESCRIPTION() in sound/soc/amd/acp/snd-acp-pdm.o
WARNING: modpost: missing MODULE_DESCRIPTION() in sound/soc/amd/acp/snd-acp-legacy-common.o
WARNING: modpost: missing MODULE_DESCRIPTION() in sound/soc/amd/acp/snd-acp-pci.o
WARNING: modpost: missing MODULE_DESCRIPTION() in sound/soc/amd/ps/snd-soc-ps-mach.o
Add the missing invocations of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://lore.kernel.org/r/20240612-md-sound-soc-amd-v1-1-ad1de0409c11@quicinc.com
Signed-off-by: Mark Brown <broonie@kernel.org>
If the ipc_prepare() callback fails for a module instance, on error rewind
we must skip the ipc_unprepare() call for ones that has positive use count.
The positive use count means that the module instance is in active use, it
cannot be unprepared.
The issue affects capture direction paths with branches (single dai with
multiple PCMs), the affected widgets are in the shared part of the paths.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20240612121203.15468-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Jai Luthra <j-luthra@ti.com>:
This series fixes two patches:
1. Fix the dmaengine API usage by calling dmaengine_synchronize() after
dmaengine_terminate_async() when xrun events occur in application
2. Use the McASP AFIFO property from DT to refine the period size,
instead of hardcoding minimum to 64 samples
This accidentally returns success instead of -EINVAL.
Fixes: c91d0c2e19 ("ASoC: samsung: midas_wm1811: Add GPIO-based headset jack detection")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Acked-by: Artur Weber <aweber.kernel@gmail.com>
Link: https://lore.kernel.org/r/01590109-cf27-404b-88ff-b42bb73ca1c6@moroto.mountain
Signed-off-by: Mark Brown <broonie@kernel.org>
When cs35l56 is connected via cs42l43 there isn't an ACPI node for the
cs35l56 so all properties are under the cs42l43 ACPI node. We're adding
a property as a way for the cs42l43 driver to pass this info in via a
software node.
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20240611132556.1557075-3-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Set driver name to "HDMI". This simplifies the code and gets rid of
the following error messages:
ASoC: driver name too long 'HDMI 58040000.encoder' -> 'HDMI_58040000_e'
Signed-off-by: Primoz Fiser <primoz.fiser@norik.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Link: https://lore.kernel.org/r/20240610125847.773394-1-primoz.fiser@norik.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The minimum period size was enforced to 64 as older devices integrating
McASP with EDMA used an internal FIFO of 64 samples.
With UDMA based platforms this internal McASP FIFO is optional, as the
DMA engine internally does some buffering which is already accounted for
when registering the platform. So we should read the actual FIFO
configuration (txnumevt/rxnumevt) instead of hardcoding frames.min to
64.
Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Signed-off-by: Jai Luthra <j-luthra@ti.com>
Link: https://lore.kernel.org/r/20240611-asoc_next-v3-2-fcfd84b12164@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Sometimes the stream may be stopped due to XRUN events, in which case
the userspace can call snd_pcm_drop() and snd_pcm_prepare() to stop and
start the stream again.
In these cases, we must wait for the DMA channel to synchronize before
marking the stream as prepared for playback, as the DMA channel gets
stopped by drop() without any synchronization. Make sure the ALSA core
synchronizes the DMA channel by adding a sync_stop() hook.
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Signed-off-by: Jai Luthra <j-luthra@ti.com>
Link: https://lore.kernel.org/r/20240611-asoc_next-v3-1-fcfd84b12164@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Andy Shevchenko <andriy.shevchenko@linux.intel.com>:
Replace or drop the legacy header that is subject to remove.
Not all of them were compile-tested, the series might have
hidden compilation errors.
Merge series from Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>:
Originally reported here:
https://github.com/thesofproject/avs-topology-xml/issues/22#issuecomment-2127892605
There is various level of failure there, first of all when topology
loads routes, it points directly into FW file, but it may be freed after
topology load. After fixing the above, when avs driver parses topology
it should allocate its own memory, as target strings can be shorter than
needed. Also clean up soc_tplg_dapm_graph_elems_load() a bit.
of_gpio.h is deprecated and subject to remove.
The driver doesn't use it directly, replace it
with what is really being used.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240605221446.2624964-7-andriy.shevchenko@linux.intel.com
Reviewed-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
of_gpio.h is deprecated and subject to remove.
The driver doesn't use it directly, replace it
with what is really being used.
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240605221446.2624964-6-andriy.shevchenko@linux.intel.com
Reviewed-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
of_gpio.h is deprecated and subject to remove.
The driver doesn't use it directly, replace it
with what is really being used.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240605221446.2624964-5-andriy.shevchenko@linux.intel.com
Acked-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
of_gpio.h is deprecated and subject to remove. The drivers in question
don't use it, simply remove the unused header.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240605221446.2624964-4-andriy.shevchenko@linux.intel.com
Reviewed-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
of_gpio.h is deprecated and subject to remove. The drivers in question
don't use it, simply remove the unused header.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240605221446.2624964-3-andriy.shevchenko@linux.intel.com
Reviewed-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
of_gpio.h is deprecated and subject to remove. The drivers in question
don't use it, simply remove the unused header.
Reviewed-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240605221446.2624964-2-andriy.shevchenko@linux.intel.com
Acked-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds audio routing for both playback and capture and
Makefile and Kconfigs changes for wcd937x.
Signed-off-by: Prasad Kumpatla <quic_pkumpatl@quicinc.com>
Co-developed-by: Mohammad Rafi Shaik <quic_mohs@quicinc.com>
Signed-off-by: Mohammad Rafi Shaik <quic_mohs@quicinc.com>
Link: https://lore.kernel.org/r/20240524035535.3119208-8-quic_mohs@quicinc.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds required dapm widgets for capture path.
Signed-off-by: Prasad Kumpatla <quic_pkumpatl@quicinc.com>
Co-developed-by: Mohammad Rafi Shaik <quic_mohs@quicinc.com>
Signed-off-by: Mohammad Rafi Shaik <quic_mohs@quicinc.com>
Link: https://lore.kernel.org/r/20240524035535.3119208-7-quic_mohs@quicinc.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds required dapm widgets for playback.
Signed-off-by: Prasad Kumpatla <quic_pkumpatl@quicinc.com>
Co-developed-by: Mohammad Rafi Shaik <quic_mohs@quicinc.com>
Signed-off-by: Mohammad Rafi Shaik <quic_mohs@quicinc.com>
Link: https://lore.kernel.org/r/20240524035535.3119208-6-quic_mohs@quicinc.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds basic controls found in WCD9370/WCD9375 codec.
Signed-off-by: Prasad Kumpatla <quic_pkumpatl@quicinc.com>
Co-developed-by: Mohammad Rafi Shaik <quic_mohs@quicinc.com>
Signed-off-by: Mohammad Rafi Shaik <quic_mohs@quicinc.com>
Link: https://lore.kernel.org/r/20240524035535.3119208-5-quic_mohs@quicinc.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds basic SoundWire codec driver to support for
WCD9370/WCD9375 TX and RX devices.
The WCD9370/WCD9375 has Multi Button Headset Control hardware to
support Headset insertion, type detection, 8 headset buttons detection,
Over Current detection and Impedence measurements.
This patch adds support for this using wcd-mbhc apis.
Signed-off-by: Prasad Kumpatla <quic_pkumpatl@quicinc.com>
Co-developed-by: Mohammad Rafi Shaik <quic_mohs@quicinc.com>
Signed-off-by: Mohammad Rafi Shaik <quic_mohs@quicinc.com>
Link: https://lore.kernel.org/r/20240524035535.3119208-4-quic_mohs@quicinc.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds support to SoundWire devices on WCD9370/WCD9375 Codec.
The WCD9370/WCD9375 Soundwire devices will be used by the
main WCD9370/WCD9375 Audio Codec driver to access registers
and configure Soundwire RX and TX ports.
Signed-off-by: Prasad Kumpatla <quic_pkumpatl@quicinc.com>
Co-developed-by: Mohammad Rafi Shaik <quic_mohs@quicinc.com>
Signed-off-by: Mohammad Rafi Shaik <quic_mohs@quicinc.com>
Link: https://lore.kernel.org/r/20240524035535.3119208-3-quic_mohs@quicinc.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When headphones are plugged in, they appear absent; when they are removed,
they appear present.
Add a specific entry in bytcr_rt5640 for this device
Signed-off-by: Thomas GENTY <tomlohave@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240608170251.99936-1-tomlohave@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Instead of using very long macro name, assign it to shorter variable
and use it instead. While doing that, we can reduce multiple if checks
using this define to one.
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20240603102818.36165-5-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The routes are allocated with kzalloc(), so all fields are zeroed by
default, skip unnecessary assignments.
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20240603102818.36165-4-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The removed dai_link->platform component cause a fail which
is exposed at runtime. (ex: when a sound tool is used)
This patch re-adds the dai_link->platform component to have
a full card registered.
Before this patch:
:~$ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: CLASSD [CLASSD], device 0: CLASSD PCM snd-soc-dummy-dai-0 []
Subdevices: 1/1
Subdevice #0: subdevice #0
:~$ speaker-test -t sine
speaker-test 1.2.6
Playback device is default
Stream parameters are 48000Hz, S16_LE, 1 channels
Sine wave rate is 440.0000Hz
Playback open error: -22,Invalid argument
After this patch which restores the platform component:
:~$ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: CLASSD [CLASSD], device 0: CLASSD PCM snd-soc-dummy-dai-0
[CLASSD PCM snd-soc-dummy-dai-0]
Subdevices: 1/1
Subdevice #0: subdevice #0
-> Resolve the playback error.
Fixes: 2f650f87c0 ("ASoC: atmel: remove unnecessary dai_link->platform")
Signed-off-by: Andrei Simion <andrei.simion@microchip.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://msgid.link/r/20240604101030.237792-1-andrei.simion@microchip.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Since "Headphone Switch" kcontrol name has already been used by da7219,
rename the control name from "Headphone" to "Headphones" to prevent the
colision. Also, this change makes kcontrol name align with the one in
mt8186-mt6366-da7219-max98357.c.
Fixes: 9c7388baa2 ("ASoC: mediatek: mt8183-da7219-max98357: Map missing jack kcontrols")
Change-Id: I9ae69a4673cd04786b247cc514fdd20f878ef009
Signed-off-by: Hsin-Te Yuan <yuanhsinte@chromium.org>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://msgid.link/r/20240531-da7219-v1-1-ac3343f3ae6a@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
When TRCM mode is enabled, I2S RX and TX clocks are synchronized through
selected clock source. Without this fix BCLK and LRCK might get parented
to an uninitialized MCLK and the DAI will receive data at wrong pace.
However, unlike in original i2s-tdm driver, there is no need to manually
synchronize mclk_rx and mclk_tx, as only one gets used anyway.
Tested on a board with RK3568 SoC and Silergy SY24145S codec with enabled and
disabled TRCM mode.
Fixes: 9e2ab4b18e ("ASoC: rockchip: i2s-tdm: Fix inaccurate sampling rates")
Signed-off-by: Alibek Omarov <a1ba.omarov@gmail.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Link: https://msgid.link/r/20240604184752.697313-1-a1ba.omarov@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:
The sof_ipc4_dma_config_tlv() call makes no sense in case of DSPless
mode since it is a configuration for the firmware.
Merge series from Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>:
We have simple-card / audio-graph / audio-graph2, basically these supports
same feature but is using different DT style.
Because we are using 3 drivers, some feature was added to one driver,
but other drivers doesn't have it. This patch set try to sync it on these
3 drivers.
Merge series from Shengjiu Wang <shengjiu.wang@nxp.com>:
On i.MX95 wakeup domain, there is one instance of Audio XCVR
supporting SPDIF mode with a connection to the Audio XCVR physical
interface.
When switching between OMTP and CTIA headset, we can hear pop noise.
To solve this issue, We modified the configuration for headphone detection
Signed-off-by: Zhang Yi <zhangyi@everest-semi.com>
Link: https://msgid.link/r/20240604021946.2911-1-zhangyi@everest-semi.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Some problematic headsets have been discovered, to help with correctly
identifying these, the detect time must be increased. Also improve the
reliability of the impedance value from the button detect by slightly
increasing the button detect delay.
Fixes: 686b8f711b ("ASoC: cs42l43: Lower default type detect time")
Signed-off-by: Maciej Strozek <mstrozek@opensource.cirrus.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://msgid.link/r/20240604132843.3309114-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in sound/soc/qcom/snd-soc-qcom-sdw.o
Add the missing invocation of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://msgid.link/r/20240603-md-snd-soc-qcom-sdw-v1-1-101ea8bcdd38@quicinc.com
Signed-off-by: Mark Brown <broonie@kernel.org>
On i.MX95, the XCVR uses a new PLL in the PHY, which is
General Purpose (GP) PLL. Add GP PLL configuration support
in the driver and add the 'pll_ver' flag to distinguish
different PLL on different platforms.
The XCVR also use PHY but limited for SPDIF only case
Add 'use_phy' flag to distinguish these platforms.
When there are 'pll8k' and 'pll11k' clock existing, the clock
source of 'phy_clk' can be changed for different sample rate
requirement.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Chancel Liu <chancel.liu@nxp.com>
Link: https://msgid.link/r/1716972002-2315-3-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Follow the convention already in use by other platforms on naming the
sof_dev_desc struct by dropping the underscore between adl and n
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240603072544.5215-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The "ADC2_BCS Disable Switch" control does basically nothing: sets field
in driver's private data structure which is never read again to
configure hardware. Drop the control as it has no effect.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://msgid.link/r/20240523124808.42923-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
All four microphone bias registers have similar layout: VOUT control
mask is exactly the same. Use one define, just like older driver
wcd938x is doing, to make the code a bit simpler.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://msgid.link/r/20240523125049.43713-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Now graph_link_init() is parsing dai_link related property.
Let's handle mclk_fs on it, too.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://msgid.link/r/87v82yfrv0.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Now graph_link_init() is parsing dai_link related property.
Let's handle mclk_fs on it, too.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://msgid.link/r/87y17ufrv8.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Current audio-graph-card is checking if the node name was "ports" or
not when parsing the property.
if (of_node_name_eq(ports, "ports"))
of_xxx(ports, ...);
Now, it is using new port_to_ports() which will be NULL if the node
doesn't have "ports", and each of_xxx functions will do nothing if
node was NULL.
Now we don't need to check ports node name. Let's remove and cleanup it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://msgid.link/r/871q5mh6fv.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Current audio-graph-card is using of_get_parent() to get "port" from
"ep", or get "ports" from "port". But it is difficlut to understand,
and "ports" might not exist.
This patch adds ep_to_port() to get "port" from "ep", and port_to_ports()
to get "ports" from "port". "ports" will be NULL if not exist.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://msgid.link/r/8734q2h6fz.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Now graph_link_init() is parsing dai_link related property.
Let's handle mclk_fs on it, too.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://msgid.link/r/874jaih6g3.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Current dai_link related property are parsed and enabled only on CPU
port node (A)(b)(c). OTOH, Audio Graph Card2 supports many connections
like Multi-CPU, DPCM, Codec2Codec today. For example in Multi-CPU case,
it will be checked via (X) -> (B) -> (b) process, but (X) / (B) part
property is not parsed.
>From dai_link related settings point of view, (B) (C) part and Codec
port also enabled is more viscerally understandable, and useful.
card2 {
(X) links = <&snd-cpu (A)
&snd-multi (B)
&snd-dpcm (C)
...>
multi {
ports {
(B) snd-multi: port { ... };
...
};
};
dpcm {
ports {
(C) snd-dpcm: port { ... };
...
};
};
codec2codec {
...
};
};
cpu_device {
ports {
(A) snd-cpu: port { ... };
(b) mcpu: port { ... };
(c) dcpu: port { ... };
}
};
One note here is that if it was Multi-CPU/Codec case, 1st port only
enabled to have property it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://msgid.link/r/875xuyh6g7.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Current audio-graph-card2 is checking if the node name was "ports" or
not when parsing the property.
if (of_node_name_eq(ports, "ports"))
of_xxx(ports, ...);
Now, it is using new port_to_ports() which will be NULL if the node
doesn't have "ports", and each of_xxx functions will do nothing if
node was NULL.
Now we don't need to check ports node name. Let's remove and cleanup it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://msgid.link/r/877cfeh6gb.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Current audio-graph-card2 is using of_get_parent() to get "port" from
"ep", or get "ports" from "port". But it is difficlut to understand,
and "ports" might not exist.
This patch adds ep_to_port() to get "port" from "ep", and port_to_ports()
to get "ports" from "port". "ports" will be NULL if not exist.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://msgid.link/r/878qzuh6gf.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
soc-pcm.c :: soc_get_playback_capture() will indicate error
if both playback_only / capture_only were true.
Thus, graph_util_parse_link_direction() which setup playback_only /
capture_only don't need to check it.
And, its return value is not used on existing driver. Let's remove it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://msgid.link/r/87a5kah6gm.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
'cx2072x_eq_ctrl' has been unused since the original
commit a497a43637 ("ASoC: Add support for Conexant CX2072X CODEC").
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Link: https://msgid.link/r/20240601225446.183505-4-linux@treblig.org
Signed-off-by: Mark Brown <broonie@kernel.org>
'wm0010_spi_msg' has been unused since the original
commit e3523e0186 ("ASoC: wm0010: Add initial wm0010 DSP driver").
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://msgid.link/r/20240601225446.183505-3-linux@treblig.org
Signed-off-by: Mark Brown <broonie@kernel.org>
'rx_macro_reg_mask_val' is unused since the original
commit af3d54b997 ("ASoC: codecs: lpass-rx-macro: add support for
lpass rx macro").
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Link: https://msgid.link/r/20240601225446.183505-2-linux@treblig.org
Signed-off-by: Mark Brown <broonie@kernel.org>
make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in sound/soc/fsl/imx-pcm-dma.o
Add the missing invocation of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://msgid.link/r/20240602-md-snd-fsl-imx-pcm-dma-v1-1-e7efc33c6bf3@quicinc.com
Signed-off-by: Mark Brown <broonie@kernel.org>
make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in sound/soc/mxs/snd-soc-mxs-pcm.o
Add the missing invocation of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://msgid.link/r/20240602-md-snd-soc-mxs-pcm-v1-1-1e663d11328d@quicinc.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We just return 0 after the skip_tlv label. No need to use a label.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://msgid.link/r/20240603073224.14726-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
sof_ipc4_dma_config_tlv{} is for Audio DSP firmware only.
Don't set it in dspless mode.
Fixes: 17386cb1b4 ("ASoC: SOF: Intel: hda-dai: set dma_stream_channel_map device")
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://msgid.link/r/20240603073224.14726-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmZc9egeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGoLsH/0xo1TNZwNRE9Qux
gFbJDDhxMtvWnJCSqUuhpypd7SoVVEVKiXW942gWTl97PlCEH0ov3p+0UbxnmG13
kKJT1C/gct95L03OAfGquIjBSWh4/55o6Vz1zYTGvTFpWZo7G3ZvCDY8o9kN5/L3
mnpC+GfzZ9ckg+2TfwlbGBQUtILHV3IipCbfDFPSrT8mS0IT67uvBlND3nI++woj
J1znGqg1PQ6yFnFCfj4RYCiyv/jEAT0ZTyokO4rH+iQVufc3y02mokhMuqmSoE6T
5bbHToLZIaa/QjRamN/+ltwyrhv8WlX4rJOkMibJY6w8gpukt/k6gL2Pguk4y2pf
0FPbbC0=
=0AGs
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmZdrNMACgkQJNaLcl1U
h9BKWQf/ctbyu0m+OEoNUAsP3rJpeauZEpDplmcSnUTKFYoV1rh2YXOME3kJPYMA
fIfbGouz64mIHTustpDlsLuqS8f/shFXdWMOEpfaBvt3SPcns1JZT+I+ecQxQAYJ
xGgxpcJnD+lVJa8a8OwFeej7lcDZATgUGZxrhcqnVGRfXopRyxr+G8fL+cek+4EY
L0LkAAjQcmqEaO4ihhfKtssC8I7bGxrhlbmAK/AuU34szVGSee+ldbqNrgicM25U
sERruhz/7rknE1xYwOsVsg/ikeeS1FHjghRGYEqdxDk2CrLZoNjyi5Fukq/QujID
KcinNHzTT4m+ERCl+98VQKyw5u4Z2Q==
=0F9i
-----END PGP SIGNATURE-----
ASoC: Merge up fixes
We need this to get the i.MX platforms working in CI again.
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:
The existing logic to pick a DMIC blob is based on several historical
assumptions that the NHLT in BIOS always contains 32-bits per sample
type (first patch, [1]).
The other issue with the existing logic is that it was designed to care only
about the bit depth of the format and fails to find the existing and correct
blob when rate/channels are different on the FE side compared to what we should
be using on the DAI side (we have components in path which can change
rate/channel count).
These issues have not been observed in past but with new MTL based (Windows)
laptops and new topologies to enhance the audio quality, we started to see weird
issues around how our assumptions of vendors failed.
Since some NHLT blob handling cleanup has been done for 6.10, this series will
complete that work to cover even cases that we don't anticipate to see.
[1] https://github.com/thesofproject/linux/issues/4973
Currently we only check the bit depth value among to DAI formats, but other
parameters might be constant, like number of channels and/or rate.
In capture we use the fe params as a reference to find the format and blob
which should be used, but in the path we can have components which can
handle expanding/narrowing number of channels or do a resample.
In these cases the topology is expected to have 'fixed' parameter for
channels/rates/bit depth and the conversion to the fe format is going to
be done within the path.
In practice this patch fixes issues like:
All DMIC formats are fixed four channels
We have a component which converts the four channel to stereo
FE is opened with 2 channel
Even if we have the correct bit depth format and blob (for four channel) we
will still be looking for stereo configurations, which will fail.
Note: the adjustment of params have switched order with the checking of
single bit depth (needed for the NHLT blob fallback support). This change
is non function, just that if the sof_ipc4_narrow_params_to_format() would
fail, there is no point of checking the single bit depth.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://msgid.link/r/20240530111918.21974-6-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Remove the duplicated code paths to check for single bit depth and to
update the params with storing the parameters needed by the function and
have a single code section.
No functional change but the code is easier to follow.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://msgid.link/r/20240530111918.21974-5-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Rename the sof_ipc4_copier_is_single_format() to
sof_ipc4_copier_is_single_bitdepth() to clear the confusion of the use of
'format' when we are querying information on the bit depth.
Format is used to describe a combination of parameters (rate, channels,
sample format / bit depth).
Rename the flags used to store the result at the same time.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://msgid.link/r/20240530111918.21974-4-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Print out the number of channels for the format explicitly instead of
having the reader to understand how to interpret the ch_map and ch_cfg
values.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://msgid.link/r/20240530111918.21974-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The ACPI NHLT table always had 32-bit DMIC blob even if 16-bit was also
present and taken as a 'rule' which obviously got broken and there is at
least one device on the market which ships with only 16-bit DMIC
configuration blob.
This corner case has never been supported and it is going to need topology
updates for DMIC copier to support multiple formats.
As for the kernel side: if the copier supports multiple formats and the
preferred 32-bit DMIC blob is not found then we will try to get a 16-bit
DMIC configuration and look for a 16-bit copier config.
Fixes: f9209644ae ("ASoC: SOF: ipc4-topology: Correct DAI copier config and NHLT blob request")
Link: https://github.com/thesofproject/linux/issues/4973
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://msgid.link/r/20240530111918.21974-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
New CPU #defines encode vendor and family as well as model.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://msgid.link/r/20240529191450.63414-1-tony.luck@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Artur Weber <aweber.kernel@gmail.com>:
Many of Samsung's Exynos 4 devices share the same midas-audio driver
to handle the codec setup. While most of these devices, including the
Midas itself, use the jack detection provided by the WM8994 driver,
other devices such as the Samsung Galaxy Tab 3 8.0 (lt01) use two GPIOs
and an ADC channel to determine jack insertion, the jack's type, and
button presses (for headsets with volume up/down/play buttons).
In the downstream kernel, this behavior is implemented in the sec-jack
driver[1], and the per-device settings are configured in *-jack.c files
in the mach folder (see e.g. the Tab 3's implementation[2]).
This patchset implements this mechanism in the midas_wm1811.c driver,
and adds new DTS options to allow for its configuration. It also
enables jack detection for the Samsung Galaxy Tab 3 8.0.
A very similar mechanism was already present in the aries_wm8994.c
driver[3]; this implementation heavily borrows from it, though there
are a few extra cleanups as well.
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:
'make W=1' now reports missing MODULE_DESCRIPTION lines. This patchset
cleans-up all the module definitions and adds MODULE_DESCRIPTION lines
as needed.
Merge series from Matteo Martelli <matteomartelli3@gmail.com>:
This patch set adds support for the Everest-semi ES8311 codec.
Everest-semi ES8311 codec is a low-power mono audio codec with I2S audio
interface and I2C control.
Implemented and tested most of the codec features, with few limitations
listed in the driver commit message. The test setup was composed of a
ESP32-LyraT-Mini board, which embeds the codec, connected via I2C and
I2S to a Raspberry Pi Zero W host board. Some tests were also performed
on a Pine64 A64 host board (e.g. to test the suspend/resume not
supported by the rpi). The codec driver was bound with the simple-card
driver running on kernel v6.9-rc7.
Merge series from Shengjiu Wang <shengjiu.wang@nxp.com>:
There are two MQS instances on the i.MX95 platform.
The definition of bit positions in the control register are
different. In order to support these MQS modules, define
two compatible strings to distinguish them.
Merge series from Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>:
X1E80100 CRD is the first board, which comes with four speakers, so we
still keep fixing and adding missing pieces.
The board has speaker arranged as left front+back and then right
front+back. Using default channel mapping causes front right speaker to
play left back stream.
Adjust the channel maps for frontend DAIs to fix stereo and four-channel
playback.
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:
More simplifications from Brent Lu for Chromebooks, Bard Liao for
SoundWire, and support for new Dell SKUs w/ Cirrus Logic codecs added
by Charles Keepax.
Merge series from Sameer Pujar <spujar@nvidia.com>:
The AHUB HW modules are interconnected with CIF which are capable of
supporting Channel and Sample bit format conversion. Due to this, the
I2S Client can have different Channel and Sample bit from the hw_params()
and this config is passed from CIF port of I2S DT node which can help to
perform this conversion.
- First change to split simple_fixup_sample_fmt to support returning
sample format value
- Second patch to support Tegra I2S client channel and sample format
programming based on CIF port from DT node.
Some Samsung devices that use the midas_wm1811 driver use a GPIO-based
method for detecting whether the headset jack is plugged in, as well as
detecting which headset buttons are pressed. There are two GPIOs:
a "headset detect" GPIO responsible for detecting jack insertion, and
a "headset key" GPIO which triggers when a button on the headset is
pressed. The plug type and the button pressed are determined based
on information from an ADC channel. The headset mic is enabled by a
headset mic bias regulator.
Add support for the GPIO-based headset jack detection mechanism,
and make it configurable from the device tree.
This implementation borrows somewhat from the aries_wm8994.c driver,
though there are a few changes to make the code cleaner, and to add
support for DT-based configuration.
Notably, a dependency on IIO is introduced, to accommodate the ADC
reading requirement.
Signed-off-by: Artur Weber <aweber.kernel@gmail.com>
Link: https://msgid.link/r/20240525-midas-wm1811-gpio-jack-v4-5-f488e03bd8c7@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Some devices use a headset mic bias supply (sometimes referred to as
"ear mic bias") to enable/disable the headset mic.
Add a REGULATOR_SUPPLY widget for this supply which gets the headset-
mic-bias supply and is routed to the Headset Mic switch similar to how
it's done for the other mic bias regulators.
Signed-off-by: Artur Weber <aweber.kernel@gmail.com>
Link: https://msgid.link/r/20240525-midas-wm1811-gpio-jack-v4-4-f488e03bd8c7@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Instead of using a custom function with the SND_SOC_DAPM_MIC widget,
split out the main mic/sub mic bias regulators into a separate widget
using SND_SOC_DAPM_REGULATOR_SUPPLY, and connect them via a routing.
Signed-off-by: Artur Weber <aweber.kernel@gmail.com>
Link: https://msgid.link/r/20240525-midas-wm1811-gpio-jack-v4-3-f488e03bd8c7@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
If a process module does not have base config extension then the same
format applies to all of it's inputs and the process->base_config_ext is
NULL, causing NULL dereference when specifically crafted topology and
sequences used.
Fixes: 648fea1284 ("ASoC: SOF: ipc4-topology: set copier output format for process module")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Cc: stable@vger.kernel.org
Link: https://msgid.link/r/20240529121201.14687-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
With the deferred probe mechanism used by the gfx/display subsystem,
we see this message repeated for no good reason. Print the information
only once.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://msgid.link/r/20240527193936.165702-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Commit 94d2d08974 ("ASoC: Intel: Boards: tgl_max98373: add dai_trigger
function") disables speaker pins in late_probe to allow DSP to enter
low power state. Add same code to sof_da7219 driver.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240527193552.165567-19-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Since maxim-module could detect tdm slot number in runtime, we could
remove local ops and use maxim-module to handle max98373.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240527193552.165567-18-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Rewrite max_98373_hw_params() function to get tdm slot number from
topology in runtime because earlier platforms use 4-slot setting
instead of 8. Also check if the interface is configured in TDM mode
before calling snd_soc_dai_set_tdm_slot() function.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240527193552.165567-17-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Support the new parameter type SOF_DAI_PARAM_INTEL_SSP_TDM_SLOTS in
sof_ipc4_dai_get_param() function to get the tdm slot number of
specific SSP port.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240527193552.165567-16-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Support the new parameter type SOF_DAI_PARAM_INTEL_SSP_TDM_SLOTS in
sof_ipc3_dai_get_param() function to get the tdm slot number of
specific SSP port.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240527193552.165567-15-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
An new interface, sof_dai_get_tdm_slots(), is added for machine driver
to get tdm slot number from topology. The dai_get_param() callback
needs to support new parameter type SOF_DAI_PARAM_INTEL_SSP_TDM_SLOTS
by returning the tdm slot number of specific SSP port.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240527193552.165567-14-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We are going to extend the dai_get_clk() callback function to retrieve
other dai-specific settings like tdm slot number, not just mclk/bclk
frequencies. Revisit functions and macros related to the callback and
replace the string 'clk' with 'param' to reflect the ongoing change.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240527193552.165567-13-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add quirks for some new Dell laptops using Cirrus amplifiers in a bridge
configuration.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240527193552.165567-11-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add some new match table entries on Arrowlake and Raptorlake for some
coming cs42l43 laptops.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240527193552.165567-10-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
No reason for cs42l43 and cs35l56 not to offer pin switch controls for
the headphones and speakers, add these controls.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240527193552.165567-9-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
get_codec_dai_by_name() is not used anymore. Remove it.
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240527193552.165567-8-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The dai is passed from the parameter. We don't need to find the dai
by name.
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240527193552.165567-7-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The dai is passed from the parameter. We don't need to find the dai
by name.
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240527193552.165567-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The dai is passed from the parameter. We don't need to find the dai
by name.
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240527193552.165567-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The dai is passed from the parameter. We don't need to find the dai
by name.
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240527193552.165567-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The dai is passed from the parameter. We don't need to find the dai
by name.
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240527193552.165567-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The dai is passed from the parameter. We don't need to find the dai
by name.
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240527193552.165567-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There are two MQS instances on the i.MX95 platform.
The definition of bit positions in the control register are
different. In order to support these MQS modules, define
two compatible strings to distinguish them.
Define different soc data according to compatible strings
On i.MX95 one instance in nect-mix is supported by this
commit, another instance in always-on-mix is not supported,
which depends on System Manager function readiness.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://msgid.link/r/1716347305-18457-3-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
MODULE_DESCRIPTION() was optional until it became mandatory and
flagged as an error by 'make W=1'.
Reported-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://msgid.link/r/20240527194414.166156-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Follow the arbitrary Intel convention order to allow for easier grep.
MODULE_LICENSE
MODULE_DESCRIPTION
MODULE_IMPORT
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://msgid.link/r/20240527194414.166156-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The module information is spread across files, group in a single
location. For maintenability and alignment, the arbitrary Intel
convention is used with the following order:
MODULE_LICENSE
MODULE_DESCRIPTION
MODULE_IMPORT
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://msgid.link/r/20240527194414.166156-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This file is part of the snd-sof module, there's no reason to re-add the
MODULE_LICENSE here.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://msgid.link/r/20240527194414.166156-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The AHUB HW modules are interconnected with CIF which are capable of
supporting Channel and Sample bit format conversion. Due to this, the
I2S Client can have different Channel and Sample bit from the hw_params()
and this config is passed from CIF port of I2S DT node which can help to
perform this conversion.
For e.g. HFP usecase consists of BT SCO with 1ch and 8k audio data
which needs to be converted and mixed with external codec playback and
capture path which is of 2ch and 48k format.
For HFP Playback:
The path includes mono to stereo and 8k to 48k conversion
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
| |1ch | | 1ch | |2ch | SFC | 2ch | |
|BT SCO |---->| I2Sx |------>| CIF |----->| 8k->48k |---->| Codec I2Sy|
|_ _ _ _| |_ _ __|client |_ _ _|audio |_ _ _ _ _| |_ _ _ _ _ _|
For HFP Capture:
The path includes stereo to mono and 48k to 8k conversion
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
| | 2ch | SFC | 2ch | | 1ch | | 1ch | |
| codec I2Sy|---->| 48k->8k |----->| CIF |------>| I2Sx |---->| BT SCO|
|_ _ _ _ _ _| |_ _ _ _ _| audio|_ _ _|client |_ _ _ _| |_ _ _ _|
For above two path, I2S client channel uses existing DT binding to pass
channels and format conversion in I2Sx CIF Port.
Signed-off-by: Mohan Kumar <mkumard@nvidia.com>
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Link: https://msgid.link/r/20240527125608.2461300-3-spujar@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Split the simple_fixup_sample_fmt() into two functions by adding
one more function named simple_util_get_sample_fmt() to return
the sample format value.
This is useful for drivers that wish to simply get the sample format
without setting the mask.
Signed-off-by: Mohan Kumar <mkumard@nvidia.com>
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Link: https://msgid.link/r/20240527125608.2461300-2-spujar@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The SoundWire interface can always support 44.1kHz using flow controlled
mode, and whether the ASP is in master mode should obviously only affect
the ASP. Update cs42l43_startup() to only restrict the rates for the ASP
DAI.
Fixes: fc918cbe87 ("ASoC: cs42l43: Add support for the cs42l43")
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://msgid.link/r/20240527100840.439832-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Constifying "struct snd_soc_ops" moves some data to a read-only section, so
increase overall security.
This structure is also part of scripts/const_structs.checkpatch.
As an example, on a x86_64, with allmodconfig:
Before:
text data bss dec hex filename
6315 3696 0 10011 271b sound/soc/intel/boards/ehl_rt5660.o
After:
text data bss dec hex filename
6379 3648 0 10027 272b sound/soc/intel/boards/ehl_rt5660.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://msgid.link/r/2f0613bf4c6018569cdaac876d0589e49cf38a80.1715622793.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Mark Brown <broonie@kernel.org>
Replace SET_RUNTIME_PM_OPS() with its modern alternative RUNTIME_PM_OPS().
The combined usage of pm_ptr() and RUNTIME_PM_OPS() allows the
compiler to evaluate if the runtime suspend/resume() functions are used
at build time or are simply dead code.
This allows removing the __maybe_unused notation from the runtime
suspend/resume() functions.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Link: https://msgid.link/r/20240507173735.3456334-3-festevam@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Replace SET_RUNTIME_PM_OPS() with its modern alternative RUNTIME_PM_OPS().
The combined usage of pm_ptr() and RUNTIME_PM_OPS() allows the
compiler to evaluate if the runtime suspend/resume() functions are used
at build time or are simply dead code.
This allows removing the __maybe_unused notation from the runtime
suspend/resume() functions.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Link: https://msgid.link/r/20240507173735.3456334-2-festevam@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Replace SET_RUNTIME_PM_OPS() with its modern alternative RUNTIME_PM_OPS().
The combined usage of pm_ptr() and RUNTIME_PM_OPS() allows the
compiler to evaluate if the runtime suspend/resume() functions are used
at build time or are simply dead code.
This allows removing the __maybe_unused notation from the runtime
suspend/resume() functions.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Link: https://msgid.link/r/20240507173735.3456334-1-festevam@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Constifying "struct snd_soc_tplg_ops" moves some data to a read-only
section, so increase overall security.
On a x86_64, with allmodconfig:
Before:
text data bss dec hex filename
44519 2888 48 47455 b95f sound/soc/sof/topology.o
After:
text data bss dec hex filename
44839 2552 48 47439 b94f sound/soc/sof/topology.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://msgid.link/r/2d9f5b75e979eb38b6f3baf85dfa1f0fdb3447ef.1715526069.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Mark Brown <broonie@kernel.org>
Constifying "struct snd_soc_tplg_ops" moves some data to a read-only
section, so increase overall security.
On a x86_64, with allmodconfig:
Before:
text data bss dec hex filename
58844 5282 56 64182 fab6 sound/soc/intel/skylake/skl-topology.o
After:
text data bss dec hex filename
59004 5122 56 64182 fab6 sound/soc/intel/skylake/skl-topology.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://msgid.link/r/48f096b6dc617ecf3ca53211c2a696a4df33b21a.1715526069.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Mark Brown <broonie@kernel.org>
Constifying "struct snd_soc_tplg_ops" moves some data to a read-only
section, so increase overall security.
On a x86_64, with allmodconfig:
Before:
text data bss dec hex filename
19942 832 0 20774 5126 sound/soc/qcom/qdsp6/topology.o
After:
text data bss dec hex filename
20102 652 0 20754 5112 sound/soc/qcom/qdsp6/topology.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://msgid.link/r/a5ae843dd8aaacbc1148aea7a3b1d03f11495872.1715526069.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Mark Brown <broonie@kernel.org>
Constifying "struct snd_soc_tplg_ops" moves some data to a read-only
section, so increase overall security.
On a x86_64, with allmodconfig:
Before:
text data bss dec hex filename
28046 794 0 28840 70a8 sound/soc/intel/avs/topology.o
After:
text data bss dec hex filename
28206 614 0 28820 7094 sound/soc/intel/avs/topology.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://msgid.link/r/01de0157088de0475970c79738284d6c86d702fe.1715526069.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_soc_tplg_component_load() does not modify its "*ops" argument. It
only read some values and stores it in "soc_tplg.ops".
This argument and the ops field in "struct soc_tplg" can be made const.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://msgid.link/r/f2f983e791d7f941a95556bb147f426a345d84d4.1715526069.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Mark Brown <broonie@kernel.org>
The ACPI NHLT table always had 32-bit DMIC blob even if 16-bit was also
present and taken as a 'rule' which obviously got broken and there is at
least one device on the market which ships with only 16-bit DMIC
configuration blob.
This corner case has never been supported and it is going to need topology
updates for DMIC copier to support multiple formats.
As for the kernel side: if the copier supports multiple formats and the
preferred 32-bit DMIC blob is not found then we will try to get a 16-bit
DMIC configuration and look for a 16-bit copier config.
Fixes: f9209644ae ("ASoC: SOF: ipc4-topology: Correct DAI copier config and NHLT blob request")
Link: https://github.com/thesofproject/linux/issues/4973
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://msgid.link/r/20240516075611.18018-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Correct white-space issues and drop unused
WCD939X_MBHC_IS_SECOND_RAMP_REQUIRED() define. No functional impact.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://msgid.link/r/20240523104228.36263-4-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
All four microphone bias registers have similar layout: enable mask is
exactly the same. Use one define, just like older driver wcd938x is
doing, to make the code a bit simpler.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://msgid.link/r/20240523104228.36263-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
There is a define for MIC bias registers enable mask called
WCD938X_MICB_EN_MASK, which is already used to handle all four MIC1-4
biases in wcd938x_mbhc_micb_adjust_voltage().
Use the same define also in wcd938x_mbhc_micb_en_status() for MIC2 to
have unified, simpler approach.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://msgid.link/r/20240523104228.36263-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
All MIC1-4 bias registers are the same and the header already defines
register fields for them. Drop unused, duplicated defines for MIC2
bias enable register.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://msgid.link/r/20240523104228.36263-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
This is the initial amplifier driver for rt1320.
--
add class id 1
Signed-off-by: Shuming Fan <shumingf@realtek.com>
v2: add Capture DAI for AEC feedback
v3: add some comments for blind writes/patch_code/calling sdw_slave_read_prop
v4: add comments for different class id
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240521084625.453554-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
X1E80100 CRD board comes with four speakers arranged as left front+back
and then right front+back. Using default channel mapping causes front
right speaker to play left back stream.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://msgid.link/r/20240520-asoc-x1e80100-4-channel-mapping-v4-4-f657159b4aad@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
When constructing packets to DSP, the Audioreach code uses 'struct
audioreach_module_config' to configure parameters like number of
channels, bitrate, sample rate etc, but uses defaults for the channel
mapping.
Rework this code to copy the channel mapping from 'struct
audioreach_module_config', instead of using the default. This requires
all callers to fill that structure: add missing initialization of
channel mapping.
Entire patch makes code more logical and easier to follow:
1. q6apm-dai and q6apm-lpass-dais code which allocates 'struct
audioreach_module_config' initializes it fully, so fills both
the number of channels and the channel mapping.
2. Audioreach code, which uses 'struct audioreach_module_config' when
constructing packets, copies entire contents of passed config, not
only pieces of it.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://msgid.link/r/20240520-asoc-x1e80100-4-channel-mapping-v4-3-f657159b4aad@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The set_channel_map() implementation in q6apm-lpass-dais driver was
copying older pre-Audioreach code from q6afe-dai driver, but not really
using it. The code sets active channel mask based on passed channel
mapping, but Audioreach code does not use that mask ever. Audioreach
module configuration does have on the other hand proper channel mapping
field, which should supersed that active channel mask.
Drop the unused active channel mask and implement proper mapping of
channels in q6apm-lpass-dais driver.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://msgid.link/r/20240520-asoc-x1e80100-4-channel-mapping-v4-2-f657159b4aad@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
There is no need for implementations of DAI set_channel_map() to modify
contents of passed arrays with actual channel mapping. Additionally,
the caller keeps full ownership of the array.
Constify these pointer arguments so the code will be safer and easier to
read (documenting the caller's ownership).
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://msgid.link/r/20240520-asoc-x1e80100-4-channel-mapping-v4-1-f657159b4aad@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support for the Everest-semi ES8311 codec.
Everest-semi ES8311 codec is a low-power mono audio codec with I2S audio
interface and I2C control.
Supported features:
* Both master and slave mode. Master clock is optional in slave mode.
* Sample rates from 8KHz to 96KHz.
* Sample formats: S16_LE, S18_3LE, S20_3LE, S24_3LE, S24_LE and S32_LE.
* I2S formats: I2S, LEFT_J, DSP_A, DSP_B.
* BCLK and FSYNC clocks inversion.
* Component suspend/resume.
* ADC, PGA, DAC controls.
* ADC DSP controls: volume, fade (ramp rate), ALC, automute, HPF, EQ.
* DAC DSP controls: volume, fade (ramp rate), DRC, EQ.
* DAPM routes: capture path with input source selection (differential
MIC/DMIC) and AIF channel source selection; playback path with DAC
channel source selection.
Limitations:
* Support only for master clocks with a ratio of ADC (or DAC) clock to
LRCLK equal to 256. This to keep the default ADC and DAC oversampling
and ADC scale settings. Anyway all 8-96KHz sample rates are supported
when the ratio of MCLK to sample rate is 32, 64, 128, 256, 384 or 512
(upper limit due to max MCLK freq of 49.2MHz).
* Coefficients for ADC HPF and ADC/DAC EQ not supported.
* Digital mic supported but not tested.
* S18_3LE, S20_3LE and S24_3LE formats supported but not tested.
Signed-off-by: Matteo Martelli <matteomartelli3@gmail.com>
Link: https://msgid.link/r/20240522164722.954656-3-matteomartelli3@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
A collection of small fixes for 6.10-rc1. Most of changes are
various device-specific fixes and quirks, while there are a few small
changes in ALSA core timer and module / built-in fixes.
-----BEGIN PGP SIGNATURE-----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=VeU/
-----END PGP SIGNATURE-----
Merge tag 'sound-fix-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of small fixes for 6.10-rc1. Most of changes are various
device-specific fixes and quirks, while there are a few small changes
in ALSA core timer and module / built-in fixes"
* tag 'sound-fix-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda/realtek: fix mute/micmute LEDs don't work for ProBook 440/460 G11.
ALSA: core: Enable proc module when CONFIG_MODULES=y
ALSA: core: Fix NULL module pointer assignment at card init
ALSA: hda/realtek: Enable headset mic of JP-IK LEAP W502 with ALC897
ASoC: dt-bindings: stm32: Ensure compatible pattern matches whole string
ASoC: tas2781: Fix wrong loading calibrated data sequence
ASoC: tas2552: Add TX path for capturing AUDIO-OUT data
ALSA: usb-audio: Fix for sampling rates support for Mbox3
Documentation: sound: Fix trailing whitespaces
ALSA: timer: Set lower bound of start tick time
ASoC: codecs: ES8326: solve hp and button detect issue
ASoC: rt5645: mic-in detection threshold modification
ASoC: Intel: sof_sdw_rt_sdca_jack_common: Use name_prefix for `-sdca` detection
A bunch of fixes that came in during the merge window, all driver
specific and none of them especially remarkable.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmZPJ10ACgkQJNaLcl1U
h9AN7wf/bR1oUfxqVRkkeWDJrKevWsXNN5LlWXar8D/yBzGp9ZzlliGKdm58O+7j
G0iPkMGT0tD5oSxEXVWoYSRLwq8c+jvW5nNiNXPAITeSzXnW4LwSnfUNs52dAmAN
MnNqzhSJbsXYH8JH5/JEco5seKC5/ijOOqIxcAhwrrdYnpjPkFXtlU4TQvSZeY7w
i7BeEO1NmvYrgxT1oT+Nm8PFYANsyf9hCgANuZQv5p9iHvjsPzIC2LuW0exy7oiC
k6X8uWiy+ETK3a9p288QZfO9AFrYm9KX3L18ha/C21ljw7DMv5xbgWm5xWnJQGsV
n59T+C5kM0V5luSjXZxQ2/hE1Ueu1Q==
=lhUd
-----END PGP SIGNATURE-----
Merge tag 'asoc-fix-v6.10-merge-window' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.10
A bunch of fixes that came in during the merge window, all driver
specific and none of them especially remarkable.
With the rework of how the __string() handles dynamic strings where it
saves off the source string in field in the helper structure[1], the
assignment of that value to the trace event field is stored in the helper
value and does not need to be passed in again.
This means that with:
__string(field, mystring)
Which use to be assigned with __assign_str(field, mystring), no longer
needs the second parameter and it is unused. With this, __assign_str()
will now only get a single parameter.
There's over 700 users of __assign_str() and because coccinelle does not
handle the TRACE_EVENT() macro I ended up using the following sed script:
git grep -l __assign_str | while read a ; do
sed -e 's/\(__assign_str([^,]*[^ ,]\) *,[^;]*/\1)/' $a > /tmp/test-file;
mv /tmp/test-file $a;
done
I then searched for __assign_str() that did not end with ';' as those
were multi line assignments that the sed script above would fail to catch.
Note, the same updates will need to be done for:
__assign_str_len()
__assign_rel_str()
__assign_rel_str_len()
I tested this with both an allmodconfig and an allyesconfig (build only for both).
[1] https://lore.kernel.org/linux-trace-kernel/20240222211442.634192653@goodmis.org/
Link: https://lore.kernel.org/linux-trace-kernel/20240516133454.681ba6a0@rorschach.local.home
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Julia Lawall <Julia.Lawall@inria.fr>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Christian König <christian.koenig@amd.com> for the amdgpu parts.
Acked-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> #for
Acked-by: Rafael J. Wysocki <rafael@kernel.org> # for thermal
Acked-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Darrick J. Wong <djwong@kernel.org> # xfs
Tested-by: Guenter Roeck <linux@roeck-us.net>
- cleanup and conversion for soundwire sysfs groups
- intel support for ace2x bits, auxdevice pm improvements
- qcom multi link device support
-----BEGIN PGP SIGNATURE-----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=H/AJ
-----END PGP SIGNATURE-----
Merge tag 'soundwire-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire
Pull soundwire updates from Vinod Koul:
- cleanup and conversion for soundwire sysfs groups
- intel support for ace2x bits, auxdevice pm improvements
- qcom multi link device support
* tag 'soundwire-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire: (33 commits)
soundwire: intel_ace2.x: add support for DOAISE property
soundwire: intel_ace2.x: add support for DODSE property
soundwire: intel_ace2x: use DOAIS and DODS settings from firmware
soundwire: intel_ace2x: cleanup DOAIS/DODS settings
soundwire: intel_ace2x: simplify check_wake()
soundwire: intel_ace2x: fix wakeup handling
soundwire: intel_init: resume all devices on exit.
soundwire: intel: export intel_resume_child_device
soundwire: intel_auxdevice: use pm_runtime_resume() instead of pm_request_resume()
ASoC: SOF: Intel: hda: disable SoundWire interrupt later
soundwire: qcom: allow multi-link on newer devices
soundwire: intel_ace2x: use legacy formula for intel_alh_id
soundwire: reconcile dp0_prop and dpn_prop
soundwire: intel_ace2x: set the clock source
soundwire: intel_ace2.x: power-up first before setting SYNCPRD
soundwire: intel_ace2x: move and extend clock selection
soundwire: intel: add support for MeteorLake additional clocks
soundwire: intel: add more values for SYNCPRD
soundwire: bus: extend base clock checks to 96 MHz
soundwire: cadence: show the bus frequency and frame shape
...
-----BEGIN PGP SIGNATURE-----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=xjoS
-----END PGP SIGNATURE-----
Merge tag 'pci-v6.10-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Skip E820 checks for MCFG ECAM regions for new (2016+) machines,
since there's no requirement to describe them in E820 and some
platforms require ECAM to work (Bjorn Helgaas)
- Rename PCI_IRQ_LEGACY to PCI_IRQ_INTX to be more specific (Damien
Le Moal)
- Remove last user and pci_enable_device_io() (Heiner Kallweit)
- Wait for Link Training==0 to avoid possible race (Ilpo Järvinen)
- Skip waiting for devices that have been disconnected while
suspended (Ilpo Järvinen)
- Clear Secondary Status errors after enumeration since Master Aborts
and Unsupported Request errors are an expected part of enumeration
(Vidya Sagar)
MSI:
- Remove unused IMS (Interrupt Message Store) support (Bjorn Helgaas)
Error handling:
- Mask Genesys GL975x SD host controller Replay Timer Timeout
correctable errors caused by a hardware defect; the errors cause
interrupts that prevent system suspend (Kai-Heng Feng)
- Fix EDR-related _DSM support, which previously evaluated revision 5
but assumed revision 6 behavior (Kuppuswamy Sathyanarayanan)
ASPM:
- Simplify link state definitions and mask calculation (Ilpo
Järvinen)
Power management:
- Avoid D3cold for HP Pavilion 17 PC/1972 PCIe Ports, where BIOS
apparently doesn't know how to put them back in D0 (Mario
Limonciello)
CXL:
- Support resetting CXL devices; special handling required because
CXL Ports mask Secondary Bus Reset by default (Dave Jiang)
DOE:
- Support DOE Discovery Version 2 (Alexey Kardashevskiy)
Endpoint framework:
- Set endpoint BAR to be 64-bit if the driver says that's all the
device supports, in addition to doing so if the size is >2GB
(Niklas Cassel)
- Simplify endpoint BAR allocation and setting interfaces (Niklas
Cassel)
Cadence PCIe controller driver:
- Drop DT binding redundant msi-parent and pci-bus.yaml (Krzysztof
Kozlowski)
Cadence PCIe endpoint driver:
- Configure endpoint BARs to be 64-bit based on the BAR type, not the
BAR value (Niklas Cassel)
Freescale Layerscape PCIe controller driver:
- Convert DT binding to YAML (Frank Li)
MediaTek MT7621 PCIe controller driver:
- Add DT binding missing 'reg' property for child Root Ports
(Krzysztof Kozlowski)
- Fix theoretical string truncation in PHY name (Sergio Paracuellos)
NVIDIA Tegra194 PCIe controller driver:
- Return success for endpoint probe instead of falling through to the
failure path (Vidya Sagar)
Renesas R-Car PCIe controller driver:
- Add DT binding missing IOMMU properties (Geert Uytterhoeven)
- Add DT binding R-Car V4H compatible for host and endpoint mode
(Yoshihiro Shimoda)
Rockchip PCIe controller driver:
- Configure endpoint BARs to be 64-bit based on the BAR type, not the
BAR value (Niklas Cassel)
- Add DT binding missing maxItems to ep-gpios (Krzysztof Kozlowski)
- Set the Subsystem Vendor ID, which was previously zero because it
was masked incorrectly (Rick Wertenbroek)
Synopsys DesignWare PCIe controller driver:
- Restructure DBI register access to accommodate devices where this
requires Refclk to be active (Manivannan Sadhasivam)
- Remove the deinit() callback, which was only need by the
pcie-rcar-gen4, and do it directly in that driver (Manivannan
Sadhasivam)
- Add dw_pcie_ep_cleanup() so drivers that support PERST# can clean
up things like eDMA (Manivannan Sadhasivam)
- Rename dw_pcie_ep_exit() to dw_pcie_ep_deinit() to make it parallel
to dw_pcie_ep_init() (Manivannan Sadhasivam)
- Rename dw_pcie_ep_init_complete() to dw_pcie_ep_init_registers() to
reflect the actual functionality (Manivannan Sadhasivam)
- Call dw_pcie_ep_init_registers() directly from all the glue
drivers, not just those that require active Refclk from the host
(Manivannan Sadhasivam)
- Remove the "core_init_notifier" flag, which was an obscure way for
glue drivers to indicate that they depend on Refclk from the host
(Manivannan Sadhasivam)
TI J721E PCIe driver:
- Add DT binding J784S4 SoC Device ID (Siddharth Vadapalli)
- Add DT binding J722S SoC support (Siddharth Vadapalli)
TI Keystone PCIe controller driver:
- Add DT binding missing num-viewport, phys and phy-name properties
(Jan Kiszka)
Miscellaneous:
- Constify and annotate with __ro_after_init (Heiner Kallweit)
- Convert DT bindings to YAML (Krzysztof Kozlowski)
- Check for kcalloc() failure in of_pci_prop_intr_map() (Duoming
Zhou)"
* tag 'pci-v6.10-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (97 commits)
PCI: Do not wait for disconnected devices when resuming
x86/pci: Skip early E820 check for ECAM region
PCI: Remove unused pci_enable_device_io()
ata: pata_cs5520: Remove unnecessary call to pci_enable_device_io()
PCI: Update pci_find_capability() stub return types
PCI: Remove PCI_IRQ_LEGACY
scsi: vmw_pvscsi: Do not use PCI_IRQ_LEGACY instead of PCI_IRQ_LEGACY
scsi: pmcraid: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
scsi: mpt3sas: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
scsi: megaraid_sas: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
scsi: ipr: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
scsi: hpsa: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
scsi: arcmsr: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
wifi: rtw89: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
dt-bindings: PCI: rockchip,rk3399-pcie: Add missing maxItems to ep-gpios
Revert "genirq/msi: Provide constants for PCI/IMS support"
Revert "x86/apic/msi: Enable PCI/IMS"
Revert "iommu/vt-d: Enable PCI/IMS"
Revert "iommu/amd: Enable PCI/IMS"
Revert "PCI/MSI: Provide IMS (Interrupt Message Store) support"
...
Calibrated data will be set to default after loading DSP config params,
which will cause speaker protection work abnormally. Reload calibrated
data after loading DSP config params. Remove declaration of unused API
which load calibrated data in wrong sequence, changed the copyright year
and correct file name in license
header.
Fixes: ef3bcde75d ("ASoC: tas2781: Add tas2781 driver")
Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>
Link: https://msgid.link/r/20240518141546.1742-1-shenghao-ding@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
TAS2552 is a Smartamp with I/V sense data, add TX path
to support capturing I/V data.
Fixes: 38803ce7b5 ("ASoC: codecs: tas*: merge .digital_mute() into .mute_stream()")
Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>
Link: https://msgid.link/r/20240518033515.866-1-shenghao-ding@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We got an error report about headphone type detection and button detection.
We fixed the headphone type detection error by adjusting the condition
of setting es8326->hp to 0.And we fixed the button detection error by
adjusting micbias and vref.
Signed-off-by: Zhang Yi <zhangyi@everest-semi.com>
Link: https://msgid.link/r/20240515062517.23661-1-zhangyi@everest-semi.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Match against the correct string to decide to add the '-sdca' postfix:
instead of codec_dai->name the correct one is component->name_prefix.
The component->name_prefix is added previously to the card->components as
hs.
Fixes: 9a9d31b149 ("ASoC: Intel: sof_sdw_rt_sdca_jack_common: remove -sdca for new codecs")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240513140730.27048-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Makefile in AMD ACP driver has a line substitution with "=" instead of
"+="; this overrides the preexisting item, hence it broke the build
after the recent change to replace *-objs with *-y.
This patch corrects the line.
Fixes: 1a74b21ce5 ("ASoC: SOF: amd: Add Probe functionality support for amd platforms.")
Fixes: 9c2f5b6eb8 ("ASoC: SOF: Use *-y instead of *-objs in Makefile")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/r/20240510170305.03b67d9f@canb.auug.org.au
Link: https://lore.kernel.org/r/20240510073656.23491-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This is a very big update, in large part due to extensive work the Intel
people have been doing in their drivers though it's also been busy
elsewhere. There's also a big overhaul of the DAPM documentation from
Luca Ceresoli arising from the work he did putting together his recent
ELC talk, and he also contributed a new tool for visualising the DAPM
state.
- A new tool dapm-graph for visualising the DAPM state.
- Substantial fixes and clarifications for the DAPM documentation.
- Very large updates throughout the Intel audio drivers.
- Cleanups of accessors for driver data, module labelling, and for
constification.
- Modernsation and cleanup work in the Mediatek drivers.
- Several fixes and features for the DaVinci I2S driver.
- New drivers for several AMD and Intel platforms, Nuvoton NAU8325,
Rockchip RK3308 and Texas Instruments PCM6240.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmZB2aoACgkQJNaLcl1U
h9D9YQf+K66pFTAMro/X4KWXfg3EeHnqgwbdb1pN/3zKqFgnxPfxJvhvpeM+bFSj
yZGssZZzd9jMkm6rLOZRPCycqSZtimy9DjSnNyPhQgU0jA2ZS1NRMnpN77ubMkPW
IBeWO8j5TBYaqttlmM0YBscErng9GsNqOD5a+HW9AJz5+TYbIIWt/2TVnyBRU0LV
NGkKj1x7AvJY239kitJ4cfFGZpPaGU7bxUk1HCpSPWM+asIpNSxBhKD73zZlWHZ/
kwJSbFslXdCm/TZZQtox/Z8GClxQ2dasWEfXWZK9kBJbHD3UH7VJ4Em50pBWnKis
piarddgSvu5zhVmZkhJhkmOe8jiswA==
=N5Dj
-----END PGP SIGNATURE-----
Merge tag 'asoc-v6.10' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Updates for v6.10
This is a very big update, in large part due to extensive work the Intel
people have been doing in their drivers though it's also been busy
elsewhere. There's also a big overhaul of the DAPM documentation from
Luca Ceresoli arising from the work he did putting together his recent
ELC talk, and he also contributed a new tool for visualising the DAPM
state.
- A new tool dapm-graph for visualising the DAPM state.
- Substantial fixes and clarifications for the DAPM documentation.
- Very large updates throughout the Intel audio drivers.
- Cleanups of accessors for driver data, module labelling, and for
constification.
- Modernsation and cleanup work in the Mediatek drivers.
- Several fixes and features for the DaVinci I2S driver.
- New drivers for several AMD and Intel platforms, Nuvoton NAU8325,
Rockchip RK3308 and Texas Instruments PCM6240.
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:
This patchset should be the last batch for this kernel cycle!
Brent Lu continued his cleanups to refactor and use fewer machine
drivers on Chrmebooks.
Bard Liao updated the sof-sdw machine driver to deal with UCM support
of the RT712 configuration. Note that this sof-sdw driver will be
refactored in the next kernel cycle to allow AMD and others to reuse
common SoundWire parts that are not Intel-specific. Initial changes
are described here: https://github.com/thesofproject/linux/pull/4967
commit c6f597bc59 ("ASoC: audio-graph-card2: remove unneeded
of_node_get()") removed of_node_get(), but it need to keep original
reference, so of_node_get() itself is needed.
Because of_get_next_child() will call of_node_put() inside, if the
reference count dropped to zero, then of_node_get() after that will be
use afer free. Need to call of_node_get() *before* that.
Fixes: c6f597bc59 ("ASoC: audio-graph-card2: remove unneeded of_node_get()")
Link: https://lore.kernel.org/r/f930862e-9d30-4ea3-b3e7-b4b4f411f6d1@moroto.mountain
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/875xvmqzs8.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
enumeration_complete will be completed when a peripheral is attached.
And initialization_complete will be completed when a peripheral is
initialized. rt715_dev_resume() should wait for initialization_complete
instead of enumeration_complete.
the issue exists since commit 20d17057f0 ("ASoC: rt715-sdca: Add RT715
sdca vendor-specific driver"), but the commit can only apply to
commit f892e66fca ("ASoC: rt-sdw*: add __func__ to all error logs").
Fixes: f892e66fca ("ASoC: rt-sdw*: add __func__ to all error logs")
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240509163658.68062-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
get_codec_name_and_route() get dai name from the first codec dai in a dai
link. However, the dai may not always be the first codec dai. Use the
dai parameter to make sure get_codec_name_and_route() refers to the
correct dai.
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240509163418.67746-19-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
A generic .rtd_init() callback could be used by different dais. It is
useful to pass dai parameter to the callback. The dai parameter will be
used in the follow up commit. No functional change here.
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240509163418.67746-18-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
sof_sdw_rtd_init() will add the controls and widgets if we set them in
the codec_info. Move the additions from .rtd_init callback to
sof_sdw_rtd_init().
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240509163418.67746-17-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently, we add card controls and dapm widgets one by one in the
codec_info->dais->rtd_init callback. Duplicated controls and dapm
widgets will be added if there are more than one types of amps in the
dai link. Moving it to sof_sdw_rtd_init() and only add the
controls/widgets of the first codec dai can avoid the duplications.
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240509163418.67746-16-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Some controls and widgets have exactly the same items. Rename them to be
generic. This is a preparation for further cleanup. No function change.
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240509163418.67746-15-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
