track empty inactive list count, so md_raid5_congested() can use it to make
decision.
Signed-off-by: Shaohua Li <shli@fusionio.com>
Signed-off-by: NeilBrown <neilb@suse.de>
get_active_stripe() is the last place we have lock contention. It has two
paths. One is stripe isn't found and new stripe is allocated, the other is
stripe is found.
The first path basically calls __find_stripe and init_stripe. It accesses
conf->generation, conf->previous_raid_disks, conf->raid_disks,
conf->prev_chunk_sectors, conf->chunk_sectors, conf->max_degraded,
conf->prev_algo, conf->algorithm, the stripe_hashtbl and inactive_list. Except
stripe_hashtbl and inactive_list, other fields are changed very rarely.
With this patch, we split inactive_list and add new hash locks. Each free
stripe belongs to a specific inactive list. Which inactive list is determined
by stripe's lock_hash. Note, even a stripe hasn't a sector assigned, it has a
lock_hash assigned. Stripe's inactive list is protected by a hash lock, which
is determined by it's lock_hash too. The lock_hash is derivied from current
stripe_hashtbl hash, which guarantees any stripe_hashtbl list will be assigned
to a specific lock_hash, so we can use new hash lock to protect stripe_hashtbl
list too. The goal of the new hash locks introduced is we can only use the new
locks in the first path of get_active_stripe(). Since we have several hash
locks, lock contention is relieved significantly.
The first path of get_active_stripe() accesses other fields, since they are
changed rarely, changing them now need take conf->device_lock and all hash
locks. For a slow path, this isn't a problem.
If we need lock device_lock and hash lock, we always lock hash lock first. The
tricky part is release_stripe and friends. We need take device_lock first.
Neil's suggestion is we put inactive stripes to a temporary list and readd it
to inactive_list after device_lock is released. In this way, we add stripes to
temporary list with device_lock hold and remove stripes from the list with hash
lock hold. So we don't allow concurrent access to the temporary list, which
means we need allocate temporary list for all participants of release_stripe.
One downside is free stripes are maintained in their inactive list, they can't
across between the lists. By default, we have total 256 stripes and 8 lists, so
each list will have 32 stripes. It's possible one list has free stripe but
other list hasn't. The chance should be rare because stripes allocation are
even distributed. And we can always allocate more stripes for cache, several
mega bytes memory isn't a big deal.
This completely removes the lock contention of the first path of
get_active_stripe(). It slows down the second code path a little bit though
because we now need takes two locks, but since the hash lock isn't contended,
the overhead should be quite small (several atomic instructions). The second
path of get_active_stripe() (basically sequential write or big request size
randwrite) still has lock contentions.
Signed-off-by: Shaohua Li <shli@fusionio.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Add a new API wait_event_cmd(). It's a variant of wait_even() with two
commands executed. One is executed before sleep, another after sleep.
Modified to match use wait.h approach based on suggestion by
Peter Zijlstra <peterz@infradead.org> - neilb
Signed-off-by: Shaohua Li <shli@fusionio.com>
Signed-off-by: NeilBrown <neilb@suse.de>
If raid5_start_reshape errors out, we need to reset all the fields
that were updated (not just some), and need to use the seq_counter
to ensure make_request() doesn't use an inconsitent state.
Signed-off-by: NeilBrown <neilb@suse.de>
The various ->run routines of md personalities assume that the 'queue'
has been initialised by the blk_set_stacking_limits() call in
md_alloc().
However when the level is changed (by level_store()) the ->run routine
for the new level is called for an array which has already had the
stacking limits modified. This can result in incorrect final
settings.
So call blk_set_stacking_limits() before ->run in level_store().
A specific consequence of this bug is that it causes
discard_granularity to be set incorrectly when reshaping a RAID4 to a
RAID0.
This is suitable for any -stable kernel since 3.3 in which
blk_set_stacking_limits() was introduced.
Cc: stable@vger.kernel.org (3.3+)
Reported-and-tested-by: "Baldysiak, Pawel" <pawel.baldysiak@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
When release_stripe() is called in grow_one_stripe(), the
mddev->thread is null. So it will omit one wakeup this thread to
release stripe.
For this condition, use slow_path to release stripe.
Bug was introduced in 3.12
Cc: stable@vger.kernel.org (3.12+)
Fixes: 773ca82fa1
Signed-off-by: Jianpeng Ma <majianpeng@gmail.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Pull scheduler changes from Ingo Molnar:
"The main changes in this cycle are:
- (much) improved CONFIG_NUMA_BALANCING support from Mel Gorman, Rik
van Riel, Peter Zijlstra et al. Yay!
- optimize preemption counter handling: merge the NEED_RESCHED flag
into the preempt_count variable, by Peter Zijlstra.
- wait.h fixes and code reorganization from Peter Zijlstra
- cfs_bandwidth fixes from Ben Segall
- SMP load-balancer cleanups from Peter Zijstra
- idle balancer improvements from Jason Low
- other fixes and cleanups"
* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (129 commits)
ftrace, sched: Add TRACE_FLAG_PREEMPT_RESCHED
stop_machine: Fix race between stop_two_cpus() and stop_cpus()
sched: Remove unnecessary iteration over sched domains to update nr_busy_cpus
sched: Fix asymmetric scheduling for POWER7
sched: Move completion code from core.c to completion.c
sched: Move wait code from core.c to wait.c
sched: Move wait.c into kernel/sched/
sched/wait: Fix __wait_event_interruptible_lock_irq_timeout()
sched: Avoid throttle_cfs_rq() racing with period_timer stopping
sched: Guarantee new group-entities always have weight
sched: Fix hrtimer_cancel()/rq->lock deadlock
sched: Fix cfs_bandwidth misuse of hrtimer_expires_remaining
sched: Fix race on toggling cfs_bandwidth_used
sched: Remove extra put_online_cpus() inside sched_setaffinity()
sched/rt: Fix task_tick_rt() comment
sched/wait: Fix build breakage
sched/wait: Introduce prepare_to_wait_event()
sched/wait: Add ___wait_cond_timeout() to wait_event*_timeout() too
sched: Remove get_online_cpus() usage
sched: Fix race in migrate_swap_stop()
...
Pull perf updates from Ingo Molnar:
"As a first remark I'd like to note that the way to build perf tooling
has been simplified and sped up, in the future it should be enough for
you to build perf via:
cd tools/perf/
make install
(ie without the -j option.) The build system will figure out the
number of CPUs and will do a parallel build+install.
The various build system inefficiencies and breakages Linus reported
against the v3.12 pull request should now be resolved - please
(re-)report any remaining annoyances or bugs.
Main changes on the perf kernel side:
* Performance optimizations:
. perf ring-buffer code optimizations, by Peter Zijlstra
. perf ring-buffer code optimizations, by Oleg Nesterov
. x86 NMI call-stack processing optimizations, by Peter Zijlstra
. perf context-switch optimizations, by Peter Zijlstra
. perf sampling speedups, by Peter Zijlstra
. x86 Intel PEBS processing speedups, by Peter Zijlstra
* Enhanced hardware support:
. for Intel Ivy Bridge-EP uncore PMUs, by Zheng Yan
. for Haswell transactions, by Andi Kleen, Peter Zijlstra
* Core perf events code enhancements and fixes by Oleg Nesterov:
. for uprobes, if fork() is called with pending ret-probes
. for uprobes platform support code
* New ABI details by Andi Kleen:
. Report x86 Haswell TSX transaction abort cost as weight
Main changes on the perf tooling side (some of these tooling changes
utilize the above kernel side changes):
* 'perf report/top' enhancements:
. Convert callchain children list to rbtree, greatly reducing the
time taken for callchain processing, from Namhyung Kim.
. Add new COMM infrastructure, further improving histogram
processing, from Frédéric Weisbecker, one fix from Namhyung Kim.
. Add /proc/kcore based live-annotation improvements, including
build-id cache support, multi map 'call' instruction navigation
fixes, kcore address validation, objdump workarounds. From
Adrian Hunter.
. Show progress on histogram collapsing, that can take a long
time, from Namhyung Kim.
. Add --max-stack option to limit callchain stack scan in 'top'
and 'report', improving callchain processing when reducing the
stack depth is an option, from Waiman Long.
. Add new option --ignore-vmlinux for perf top, from Willy
Tarreau.
* 'perf trace' enhancements:
. 'perf trace' now can can use a 'perf probe' dynamic tracepoints
to hook into the userspace -> kernel pathname copy so that it
can map fds to pathnames without reading /proc/pid/fd/ symlinks.
From Arnaldo Carvalho de Melo.
. Show VFS path associated with fd in live sessions, using a
'vfs_getname' 'perf probe' created dynamic tracepoint or by
looking at /proc/pid/fd, from Arnaldo Carvalho de Melo.
. Add 'trace' beautifiers for lots of syscall arguments, from
Arnaldo Carvalho de Melo.
. Implement more compact 'trace' output by suppressing zeroed
args, from Arnaldo Carvalho de Melo.
. Show thread COMM by default in 'trace', from Arnaldo Carvalho de
Melo.
. Add option to show full timestamp in 'trace', from David Ahern.
. Add 'record' command in 'trace', to record raw_syscalls:*, from
David Ahern.
. Add summary option to dump syscall statistics in 'trace', from
David Ahern.
. Improve error messages in 'trace', providing hints about system
configuration steps needed for using it, from Ramkumar
Ramachandra.
. 'perf trace' now emits hints as to why tracing is not possible,
helping the user to setup the system to allow tracing in the
desired permission granularity, telling if the problem is due to
debugfs not being mounted or with not enough permission for
!root, /proc/sys/kernel/perf_event_paranoit value, etc. From
Arnaldo Carvalho de Melo.
* 'perf record' enhancements:
. Check maximum frequency rate for record/top, emitting better
error messages, from Jiri Olsa.
. 'perf record' code cleanups, from David Ahern.
. Improve write_output error message in 'perf record', from Adrian
Hunter.
. Allow specifying B/K/M/G unit to the --mmap-pages arguments,
from Jiri Olsa.
. Fix command line callchain attribute tests to handle the new
-g/--call-chain semantics, from Arnaldo Carvalho de Melo.
* 'perf kvm' enhancements:
. Disable live kvm command if timerfd is not supported, from David
Ahern.
. Fix detection of non-core features, from David Ahern.
* 'perf list' enhancements:
. Add usage to 'perf list', from David Ahern.
. Show error in 'perf list' if tracepoints not available, from
Pekka Enberg.
* 'perf probe' enhancements:
. Support "$vars" meta argument syntax for local variables,
allowing asking for all possible variables at a given probe
point to be collected when it hits, from Masami Hiramatsu.
* 'perf sched' enhancements:
. Address the root cause of that 'perf sched' stack initialization
build slowdown, by programmatically setting a big array after
moving the global variable back to the stack. Fix from Adrian
Hunter.
* 'perf script' enhancements:
. Set up output options for in-stream attributes, from Adrian
Hunter.
. Print addr by default for BTS in 'perf script', from Adrian
Juntmer
* 'perf stat' enhancements:
. Improved messages when doing profiling in all or a subset of
CPUs using a workload as the session delimitator, as in:
'perf stat --cpu 0,2 sleep 10s'
from Arnaldo Carvalho de Melo.
. Add units to nanosec-based counters in 'perf stat', from David
Ahern.
. Remove bogus info when using 'perf stat' -e cycles/instructions,
from Ramkumar Ramachandra.
* 'perf lock' enhancements:
. 'perf lock' fixes and cleanups, from Davidlohr Bueso.
* 'perf test' enhancements:
. Fixup PERF_SAMPLE_TRANSACTION handling in sample synthesizing
and 'perf test', from Adrian Hunter.
. Clarify the "sample parsing" test entry, from Arnaldo Carvalho
de Melo.
. Consider PERF_SAMPLE_TRANSACTION in the "sample parsing" test,
from Arnaldo Carvalho de Melo.
. Memory leak fixes in 'perf test', from Felipe Pena.
* 'perf bench' enhancements:
. Change the procps visible command-name of invididual benchmark
tests plus cleanups, from Ingo Molnar.
* Generic perf tooling infrastructure/plumbing changes:
. Separating data file properties from session, code
reorganization from Jiri Olsa.
. Fix version when building out of tree, as when using one of
these:
$ make help | grep perf
perf-tar-src-pkg - Build perf-3.12.0.tar source tarball
perf-targz-src-pkg - Build perf-3.12.0.tar.gz source tarball
perf-tarbz2-src-pkg - Build perf-3.12.0.tar.bz2 source tarball
perf-tarxz-src-pkg - Build perf-3.12.0.tar.xz source tarball
$
from David Ahern.
. Enhance option parse error message, showing just the help lines
of the options affected, from Namhyung Kim.
. libtraceevent updates from upstream trace-cmd repo, from Steven
Rostedt.
. Always use perf_evsel__set_sample_bit to set sample_type, from
Adrian Hunter.
. Memory and mmap leak fixes from Chenggang Qin.
. Assorted build fixes for from David Ahern and Jiri Olsa.
. Speed up and prettify the build system, from Ingo Molnar.
. Implement addr2line directly using libbfd, from Roberto Vitillo.
. Separate the GTK support in a separate libperf-gtk.so DSO, that
is only loaded when --gtk is specified, from Namhyung Kim.
. perf bash completion fixes and improvements from Ramkumar
Ramachandra.
. Support for Openembedded/Yocto -dbg packages, from Ricardo
Ribalda Delgado.
And lots and lots of other fixes and code reorganizations that did not
make it into the list, see the shortlog, diffstat and the Git log for
details!"
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (300 commits)
uprobes: Fix the memory out of bound overwrite in copy_insn()
uprobes: Fix the wrong usage of current->utask in uprobe_copy_process()
perf tools: Remove unneeded include
perf record: Remove post_processing_offset variable
perf record: Remove advance_output function
perf record: Refactor feature handling into a separate function
perf trace: Don't relookup fields by name in each sample
perf tools: Fix version when building out of tree
perf evsel: Ditch evsel->handler.data field
uprobes: Export write_opcode() as uprobe_write_opcode()
uprobes: Introduce arch_uprobe->ixol
uprobes: Kill module_init() and module_exit()
uprobes: Move function declarations out of arch
perf/x86/intel: Add Ivy Bridge-EP uncore IRP box support
perf/x86/intel/uncore: Add filter support for IvyBridge-EP QPI boxes
perf: Factor out strncpy() in perf_event_mmap_event()
tools/perf: Add required memory barriers
perf: Fix arch_perf_out_copy_user default
perf: Update a stale comment
perf: Optimize perf_output_begin() -- address calculation
...
Pull leftover IRQ fixes from Ingo Molnar:
"Two (minor) fixlets that missed v3.12"
* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
genirq: Set the irq thread policy without checking CAP_SYS_NICE
irq: DocBook/genericirq.tmpl: Correct various typos
Pull IRQ changes from Ingo Molnar:
"The biggest change this cycle are the softirq/hardirq stack
interaction and nesting fixes, cleanups and reorganizations from
Frederic. This is the longer followup story to the softirq nesting
fix that is already upstream (commit ded7975475: "irq: Force hardirq
exit's softirq processing on its own stack")"
* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip: bcm2835: Convert to use IRQCHIP_DECLARE macro
powerpc: Tell about irq stack coverage
x86: Tell about irq stack coverage
irq: Optimize softirq stack selection in irq exit
irq: Justify the various softirq stack choices
irq: Improve a bit softirq debugging
irq: Optimize call to softirq on hardirq exit
irq: Consolidate do_softirq() arch overriden implementations
x86/irq: Correct comment about i8259 initialization
Pull RCU updates from Ingo Molnar:
"The main RCU changes in this cycle are:
- Idle entry/exit changes, to throttle callback execution and other
refinements to speed up kbuild, primarily to address performance
issues located by Tibor Billes.
- Grace-period related changes, primarily to aid in debugging,
inspired by an -rt debugging session.
- Code reorganization moving RCU's source files into its own
kernel/rcu/ directory.
- RCU documentation updates
- Miscellaneous fixes.
Note, the following commit:
5c889690aa mm: Place preemption point in do_mlockall() loop
is identical to the commit already in your tree via email:
22356f447c mm: Place preemption point in do_mlockall() loop
[ Your version of the changelog nicely demonstrates it how kernel oops
messages should be trimmed properly :-/ ]"
* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (30 commits)
rcu: Move RCU-related source code to kernel/rcu directory
rcu: Fix occurrence of "the the" in checklist.txt
kthread: Add pointer to vmstat-avoidance patch
rcu: Update stall-warning documentation
rcu: Consistent rcu_is_watching() naming
rcu: Change EXPORT_SYMBOL() to EXPORT_SYMBOL_GPL()
rcu: Is it safe to enter an RCU read-side critical section?
rcu: Throttle invoke_rcu_core() invocations due to non-lazy callbacks
rcu: Throttle rcu_try_advance_all_cbs() execution
rcu: Remove redundant code from rcu_cleanup_after_idle()
rcu: Fix CONFIG_RCU_NOCB_CPU_ALL panic on machines with sparse CPU mask
rcu: Avoid sparse warnings in rcu_nocb_wake trace event
rcu: Track rcu_nocb_kthread()'s sleeping and awakening
rcu: Distinguish between NOCB and non-NOCB rcu_callback trace events
rcu: Add tracing for rcuo no-CBs CPU wakeup handshake
rcu: Add tracing of normal (non-NOCB) grace-period requests
rcu: Add tracing to rcu_gp_kthread()
rcu: Flag lockless access to ->gp_flags with ACCESS_ONCE()
rcu: Prevent spurious-wakeup DoS attack on rcu_gp_kthread()
rcu: Improve grace-period start logic
...
Since the introduction of PREEMPT_NEED_RESCHED in:
f27dde8dee ("sched: Add NEED_RESCHED to the preempt_count")
we need to be able to look at both TIF_NEED_RESCHED and
PREEMPT_NEED_RESCHED to understand the full preemption behaviour.
Add it to the trace output.
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Fengguang Wu <fengguang.wu@intel.com>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Link: http://lkml.kernel.org/r/20131004152826.GP3081@twins.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
There is a race between stop_two_cpus, and the global stop_cpus.
It is possible for two CPUs to get their stopper functions queued
"backwards" from one another, resulting in the stopper threads
getting stuck, and the system hanging. This can happen because
queuing up stoppers is not synchronized.
This patch adds synchronization between stop_cpus (a rare operation),
and stop_two_cpus.
Reported-and-Tested-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Mel Gorman <mgorman@suse.de>
Link: http://lkml.kernel.org/r/20131101104146.03d1e043@annuminas.surriel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
* Towards a working SMP setup (ASID allocation, TLB Flush,...)
* Support for TRACE_IRQFLAGS, LOCKDEP
* cacheflush backend consolidation for I/D
* Lots of allmodconfig fixlets from Chen
* Other improvements/fixes
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)
iQIcBAABAgAGBQJSgFliAAoJEGnX8d3iisJer20P/16PWJI3rbaLqvfRjPhcukYm
lKu26hE9Csj1Shye3Zm2XqnMpNknismonMpANTGhtfKh9e0XKGx78JGvzNe2EuKm
+D1Cyl1y/DxC5muZGuCoiY3JzxIe2phPWdZx/6mKL9QoxiNfpcX+wz7S6SXCmqWk
gW/gK8oUfugqhzbIkXO8vvm5cJxWTqfL4iQDK8bWmsYp/fpdz/aajZm8gMA5rVEq
UYQsq2tlAVoUaMyeGhUrt2CFAilbflp/O4YMM7FpzwycXvhjKlr6OcXNh6dJKkUP
jJF4VFhosnN22YVjS4D8p5Mwk+JEs5OL2RU0YLwpJdEU6Xw7TiSuHWYfMOribwj1
KZ8cMSua6hQCY6X+YsQKkCDwY1vf5QZT/vA7KYi/o3fq8UXIdTEpc4UaPcKs0bdv
cQ7YyvPpotsziP30vermOgddKFw4cDtKapbqql0JnDkpK9ToBEkWodAK/z97Vt0+
N42xJCdFGkJk+UiNnKjkLNUv5iimslA4cbDzniEH7HJyL/o3ev0HPf+bYORXTIBx
rZpmEAQvRa6PUDnk9ihpoBCdJvxsJBC/fI9okB6/YLisxnb6W2QczlRwmUxLfIOD
fR2+XnGSk4D48f0kMEaEqx9DR/x8MHkJAVkpOW0gNYy6KcgHWgBHMEtfOyJE4AGr
Jm4p3Ny7b2FtnX+G8AzU
=4IHa
-----END PGP SIGNATURE-----
Merge tag 'arc-v3.13-rc1-part1' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc
Pull ARC changes from Vineet Gupta:
- Towards a working SMP setup (ASID allocation, TLB Flush,...)
- Support for TRACE_IRQFLAGS, LOCKDEP
- cacheflush backend consolidation for I/D
- Lots of allmodconfig fixlets from Chen
- Other improvements/fixes
* tag 'arc-v3.13-rc1-part1' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: (25 commits)
ARC: [plat-arcfpga] defconfig update
smp, ARC: kill SMP single function call interrupt
ARC: [SMP] Disallow RTSC
ARC: [SMP] Fix build failures for large NR_CPUS
ARC: [SMP] enlarge possible NR_CPUS
ARC: [SMP] TLB flush
ARC: [SMP] ASID allocation
arc: export symbol for pm_power_off in reset.c
arc: export symbol for save_stack_trace() in stacktrace.c
arc: remove '__init' for get_hw_config_num_irq()
arc: remove '__init' for first_lines_of_secondary()
arc: remove '__init' for setup_processor() and arc_init_IRQ()
arc: kgdb: add default implementation for kgdb_roundup_cpus()
ARC: Fix bogus gcc warning and micro-optimise TLB iteration loop
ARC: Add support for irqflags tracing and lockdep
ARC: Reset the value of Interrupt Priority Register
ARC: Reduce #ifdef'ery for unaligned access emulation
ARC: Change calling convention of do_page_fault()
ARC: cacheflush optim - PTAG can be loop invariant if V-P is const
ARC: cacheflush refactor #3: Unify the {d,i}cache flush leaf helpers
...
Pull m68k updates from Geert Uytterhoeven:
"Summary:
- __put_user_unaligned may/will be used by btrfs
- m68k part of a global cleanup"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
m68k: Remove deprecated IRQF_DISABLED
m68k/m68knommu: Implement __get_user_unaligned/__put_user_unaligned()
Pull parisc update from Helge Deller:
- a bugfix for sticon (parisc text console driver) to not crash the
64bit kernel on machines with more than 4GB RAM
- added kernel audit support
- made udelay() implementation SMP-safe
- "make install" now does not depend on vmlinux
- added defconfigs for 32- and 64-kernels
* 'parisc-3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: add generic 32- and 64-bit defconfigs
parisc: sticon - unbreak on 64bit kernel
parisc: signal fixup - SIGBUS vs. SIGSEGV
parisc: implement full version of access_ok()
parisc: correctly display number of active CPUs
parisc: do not count IPI calls twice
parisc: make udelay() SMP-safe
parisc: remove duplicate define
parisc: make "make install" not depend on vmlinux
parisc: add kernel audit feature
parisc: provide macro to create exception table entries
Most of this branch consists of updates, additions and general churn of
the device tree source files in the kernel (arch/arm/boot/dts). Besides
that, there are a few things to point out:
- Lots of platform conversion on OMAP2+, with removal of old board files
for various platforms.
- Final conversion of a bunch of ux500 (ST-Ericsson) platforms as well
- Some updates to pinctrl and other subsystems. Most of these are for
DT-enablement of the various platforms and acks have been collected.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=nH67
-----END PGP SIGNATURE-----
Merge tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC DT updates from Olof Johansson:
"Most of this branch consists of updates, additions and general churn
of the device tree source files in the kernel (arch/arm/boot/dts).
Besides that, there are a few things to point out:
- Lots of platform conversion on OMAP2+, with removal of old board
files for various platforms.
- Final conversion of a bunch of ux500 (ST-Ericsson) platforms as
well
- Some updates to pinctrl and other subsystems. Most of these are
for DT-enablement of the various platforms and acks have been
collected"
* tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (385 commits)
ARM: dts: bcm11351: Use GIC/IRQ defines for sdio interrupts
ARM: dts: bcm: Add missing UARTs for bcm11351 (bcm281xx)
ARM: dts: bcm281xx: Add card detect GPIO
ARM: dts: rename ARCH_BCM to ARCH_BCM_MOBILE (dt)
ARM: bcm281xx: Add device node for the GPIO controller
ARM: mvebu: Add Netgear ReadyNAS 104 board
ARM: tegra: fix Tegra114 IOMMU register address
ARM: kirkwood: add support for OpenBlocks A7 platform
ARM: dts: omap4-panda: add DPI pinmuxing
ARM: dts: AM33xx: Add RNG node
ARM: dts: AM33XX: Add hwspinlock node
ARM: dts: OMAP5: Add hwspinlock node
ARM: dts: OMAP4: Add hwspinlock node
ARM: dts: use 'status' property for PCIe nodes
ARM: dts: sirf: add missed address-cells and size-cells for prima2 I2C
ARM: dts: sirf: add missed cell, cs and dma channel for SPI nodes
ARM: dts: sirf: add missed graphics2d iobg in atlas6 dts
ARM: dts: sirf: add missed chhifbg node in prima2 and atlas6 dts
ARM: dts: sirf: add missed memcontrol-monitor node in prima2 and atlas6 dts
ARM: mvebu: Add the core-divider clock to Armada 370/XP
...
Updates of SoC-near drivers and other driver updates that makes more sense to
take through our tree. In this case it's involved:
- Some Davinci driver updates that has required corresponding platform code
changes (gpio mostly)
- CCI bindings and a few driver updates
- Marvell mvebu patches for PCI MSI support (could have gone through the PCI
tree for this release, but they were acked by Bjorn for 3.12 so we kept them
through arm-soc).
- Marvell dove switch-over to DT-based PCIe configuration
- Misc updates for Samsung platform dmaengine drivers
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)
iQIcBAABAgAGBQJSgBr3AAoJEIwa5zzehBx3QkEP/i0bm4V+AkNV/EXPxqXDf0Re
WIKao/0UjqEfTLSx38F+GlsCdpiPkicPZls0tzAiuqWycx+gMiUlJ7XB+tFmQRk1
RS4KzPQeALFVapjVLtid/Bls9OVI8NcNL1Dx7FISTURzrSzB+kXg7KIsq92SootW
AHUMZbPQNqZoTYcRo9EFEBCm+7QwH1GmWIo5tID6sRhPIsj0xXrw/zOQDK4WDbkv
ZmlR2PNdVTYNuKsWtBcINU5GGNcTCEpnLlHZ9QzVOGyP2M/S93FQdjjm+vDxBRC6
0WsCCFzWc2boSyKrah8xcb7kox7+8HMXUFFAARfOJxvqnMpDCSQnQv0Hb2SiwbkF
7AW90lj+E9KqleSVy1fjGOvx2MV8vhqFMoCYg2TXW2546JADGnCw2JOILfRcqMox
JqIpc84Yhmnv2qFCDxdj9hLYqvhH3RjdLzaLhSfMPc8pjP1StMJzcNi7tN46KVqg
60wU7DvJ0uWfacUGj7VBn88XiZvvJjO/laxj5UcZlS+kQzsysw4Tbriz9UeJK1yl
N0LBl4iA9xn5aUEI/1kL8xzX+h01VodMCe6jIz3JBdE66vCX6d2Tf+zYpNHiGCsH
kBfOpuYc1jVW6qTYqDWgO3IVdDdSGa096AF5vR3MOmtDidblq9QVVxxhDwscqO6J
O0RIcxwZAzQGcO4F50PL
=yCsK
-----END PGP SIGNATURE-----
Merge tag 'drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM driver updates from Olof Johansson:
"Updates of SoC-near drivers and other driver updates that makes more
sense to take through our tree. In this case it's involved:
- Some Davinci driver updates that has required corresponding
platform code changes (gpio mostly)
- CCI bindings and a few driver updates
- Marvell mvebu patches for PCI MSI support (could have gone through
the PCI tree for this release, but they were acked by Bjorn for
3.12 so we kept them through arm-soc).
- Marvell dove switch-over to DT-based PCIe configuration
- Misc updates for Samsung platform dmaengine drivers"
* tag 'drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (32 commits)
ARM: S3C24XX: add dma pdata for s3c2410, s3c2440 and s3c2442
dmaengine: s3c24xx-dma: add support for the s3c2410 type of controller
ARM: S3C24XX: Fix possible dma selection warning
PCI: mvebu: make local functions static
PCI: mvebu: add I/O access wrappers
PCI: mvebu: Dynamically detect if the PEX link is up to enable hot plug
ARM: mvebu: fix gated clock documentation
ARM: dove: remove legacy pcie and clock init
ARM: dove: switch to DT probed mbus address windows
ARM: SAMSUNG: set s3c24xx_dma_filter for s3c64xx-spi0 device
ARM: S3C24XX: add platform-devices for new dma driver for s3c2412 and s3c2443
dmaengine: add driver for Samsung s3c24xx SoCs
ARM: S3C24XX: number the dma clocks
PCI: mvebu: add support for Marvell Dove SoCs
PCI: mvebu: add support for reset on GPIO
PCI: mvebu: remove subsys_initcall
PCI: mvebu: increment nports only for registered ports
PCI: mvebu: move clock enable before register access
PCI: mvebu: add support for MSI
irqchip: armada-370-xp: implement MSI support
...
Board-related updates. This branch is getting smaller and smaller, which is
the whole idea so that's reassuring.
Right now by far most of the code is related to shmobile updates, and
they are now switching over to removal of board code and migration to
multiplatform, so we'll see their board code base shrink in the near
future too, I hope.
In addition to that is some defconfig updates, some display updates for OMAP
and a bit of new board support for Rockchip boards.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=ZYOa
-----END PGP SIGNATURE-----
Merge tag 'boards-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC board updates from Olof Johansson:
"Board-related updates. This branch is getting smaller and smaller,
which is the whole idea so that's reassuring.
Right now by far most of the code is related to shmobile updates, and
they are now switching over to removal of board code and migration to
multiplatform, so we'll see their board code base shrink in the near
future too, I hope.
In addition to that is some defconfig updates, some display updates
for OMAP and a bit of new board support for Rockchip boards"
* tag 'boards-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (56 commits)
ARM: rockchip: add support for rk3188 and Radxa Rock board
ARM: rockchip: add dts for bqcurie2 tablet
ARM: rockchip: enable arm-global-timer
ARM: rockchip: move shared dt properties to common source file
ARM: OMAP2+: display: Create omap_vout device inside omap_display_init
ARM: OMAP2+: display: Create omapvrfb and omapfb devices inside omap_display_init
ARM: OMAP2+: display: Create omapdrm device inside omap_display_init
ARM: OMAP2+: drm: Don't build device for DMM
ARM: tegra: defconfig updates
RX-51: Add support for OMAP3 ROM Random Number Generator
ARM: OMAP3: RX-51: ARM errata 430973 workaround
ARM: OMAP3: Add secure function omap_smc3() which calling instruction smc #1
ARM: shmobile: marzen: enable INTC IRQ
ARM: shmobile: bockw: add SMSC support on reference
ARM: shmobile: Use SMP on Koelsch
ARM: shmobile: Remove KZM9D reference DTS
ARM: shmobile: Let KZM9D multiplatform boot with KZM9D DTB
ARM: shmobile: Remove non-multiplatform KZM9D reference support
ARM: shmobile: Use KZM9D without reference for multiplatform
ARM: shmobile: Sync KZM9D DTS with KZM9D reference DTS
...
New and updated SoC support. Among the things new for this release are:
- More support for the AM33xx platforms from TI
- Tegra 124 support, and some updates to older tegra families as well
- imx cleanups and updates across the board
- A rename of Broadcom's Mobile platforms which were introduced as ARCH_BCM,
and turned out to be too broad a name. New name is ARCH_BCM_MOBILE.
- A whole bunch of updates and fixes for integrator, making the platform code
more modern and switches over to DT-only booting.
- Support for two new Renesas shmobile chipsets. Next up for them is more work
on consolidation instead of introduction of new non-multiplatform SoCs, we're
all looking forward to that!
- Misc cleanups for older Samsung platforms, some Allwinner updates, etc.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=WYJl
-----END PGP SIGNATURE-----
Merge tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC platform changes from Olof Johansson:
"New and updated SoC support. Among the things new for this release
are:
- More support for the AM33xx platforms from TI
- Tegra 124 support, and some updates to older tegra families as well
- imx cleanups and updates across the board
- A rename of Broadcom's Mobile platforms which were introduced as
ARCH_BCM, and turned out to be too broad a name. New name is
ARCH_BCM_MOBILE.
- A whole bunch of updates and fixes for integrator, making the
platform code more modern and switches over to DT-only booting.
- Support for two new Renesas shmobile chipsets. Next up for them is
more work on consolidation instead of introduction of new
non-multiplatform SoCs, we're all looking forward to that!
- Misc cleanups for older Samsung platforms, some Allwinner updates,
etc"
* tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (159 commits)
ARM: bcm281xx: Add ARCH_BCM_MOBILE to bcm config
ARM: bcm_defconfig: Run "make savedefconfig"
ARM: bcm281xx: Add ARCH Timers to config
rename ARCH_BCM to ARCH_BCM_MOBILE (mach-bcm)
ARM: vexpress: Enable platform-specific options in defconfig
ARM: vexpress: Make defconfig work again
ARM: sunxi: remove .init_time hooks
ARM: imx: enable suspend for imx6sl
ARM: imx: ensure dsm_request signal is not asserted when setting LPM
ARM: imx6q: call WB and RBC configuration from imx6q_pm_enter()
ARM: imx6q: move low-power code out of clock driver
ARM: imx: drop extern with function prototypes in common.h
ARM: imx: reset core along with enable/disable operation
ARM: imx: do not return from imx_cpu_die() call
ARM: imx_v6_v7_defconfig: Select CONFIG_PROVE_LOCKING
ARM: imx_v6_v7_defconfig: Enable LEDS_GPIO related options
ARM: mxs_defconfig: Turn off CONFIG_DEBUG_GPIO
ARM: imx: replace imx6q_restart() with mxc_restart()
ARM: mach-imx: mm-imx5: Retrieve iomuxc base address from dt
ARM: mach-imx: mm-imx5: Retrieve tzic base address from dt
...
This branch contains code cleanups, moves and removals for 3.13.
Qualcomm msm targets had a bunch of code removal for legacy non-DT
platforms. Nomadik saw more device tree conversions and cleanup of old
code. Tegra has some code refactoring, etc.
One longish patch series from Sebastian Hasselbarth changes the init_time
hooks and tries to use a generic implementation for most platforms,
since they were all doing more or less the same things.
Finally the "shark" platform is removed in this release. It's been
abandoned for a while and nobody seems to care enough to keep it
around. If someone comes along and wants to resurrect it, the removal
can easily be reverted and code brought back.
Beyond this, mostly a bunch of removals of stale content across the
board, etc.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=SHZQ
-----END PGP SIGNATURE-----
Merge tag 'cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC cleanups from Olof Johansson:
"This branch contains code cleanups, moves and removals for 3.13.
Qualcomm msm targets had a bunch of code removal for legacy non-DT
platforms. Nomadik saw more device tree conversions and cleanup of
old code. Tegra has some code refactoring, etc.
One longish patch series from Sebastian Hasselbarth changes the
init_time hooks and tries to use a generic implementation for most
platforms, since they were all doing more or less the same things.
Finally the "shark" platform is removed in this release. It's been
abandoned for a while and nobody seems to care enough to keep it
around. If someone comes along and wants to resurrect it, the removal
can easily be reverted and code brought back.
Beyond this, mostly a bunch of removals of stale content across the
board, etc"
* tag 'cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (79 commits)
ARM: gemini: convert to GENERIC_CLOCKEVENTS
ARM: EXYNOS: remove CONFIG_MACH_EXYNOS[4, 5]_DT config options
ARM: OMAP3: control: add API for setting IVA bootmode
ARM: OMAP3: CM/control: move CM scratchpad save to CM driver
ARM: OMAP3: McBSP: do not access CM register directly
ARM: OMAP3: clock: add API to enable/disable autoidle for a single clock
ARM: OMAP2: CM/PM: remove direct register accesses outside CM code
MAINTAINERS: Add patterns for DTS files for AT91
ARM: at91: remove init_machine() as default is suitable
ARM: at91/dt: split sama5d3 peripheral definitions
ARM: at91/dt: split sam9x5 peripheral definitions
ARM: Remove temporary sched_clock.h header
ARM: clps711x: Use linux/sched_clock.h
MAINTAINERS: Add DTS files to patterns for Samsung platform
ARM: EXYNOS: remove unnecessary header inclusions from exynos4/5 dt machine file
ARM: tegra: fix ARCH_TEGRA_114_SOC select sort order
clk: nomadik: fix missing __init on nomadik_src_init
ARM: drop explicit selection of HAVE_CLK and CLKDEV_LOOKUP
ARM: S3C64XX: Kill CONFIG_PLAT_S3C64XX
ASoC: samsung: Use CONFIG_ARCH_S3C64XX to check for S3C64XX support
...
A set of fixes for various platforms that weren't considered bad enough
to include in 3.12 (nor -stable). Mostly simple typo fixes, etc.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=70+h
-----END PGP SIGNATURE-----
Merge tag 'fixes-nc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC low-priority fixes from Olof Johansson:
"A set of fixes for various platforms that weren't considered bad
enough to include in 3.12 (nor -stable). Mostly simple typo fixes,
etc"
* tag 'fixes-nc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
ARM: OMAP2+: irq, AM33XX add missing register check
ARM: OMAP2+: wakeupgen: AM43x adaptation
ARM: OMAP1: Fix a bunch of GPIO related section warnings after initdata got corrected
ARM: dts: fix PL330 MDMA1 address in DT for Universal C210 board
ARM: dts: Work around lack of cpufreq regulator lookup for exynos4210-origen and trats boards
ARM: dts: Fix typo earlyprintk in exynos5440-sd5v1 and ssdk5440 boards
ARM: dts: Correct typo in use of samsung,pin-drv for exynos5250
ARM: rockchip: remove obsolete rockchip,config properties
ARM: rockchip: fix wrong use of non-existent CONFIG_LOCAL_TIMERS
ARM: mach-omap1: Fix omap1510_fpga_init_irq() implicit declarations.
ARM: OMAP1: fix incorrect placement of __initdata tag
ARM: OMAP: remove deprecated IRQF_DISABLED
ARM: OMAP2+: throw the die id into the entropy pool
- Ticket-based spinlock implementation and lockless lockref support
- Big endian support
- CPU hotplug support, currently for PSCI (Power State Coordination
Interface) capable firmware
- Virtual address space extended to 42-bit in the 64K page configuration
(maximum VA space with 2 levels of page tables)
- Compat (AArch32) kuser helpers updated to ARMv8 (make use of
load-acquire/store-release instructions)
- Code cleanup, defconfig update and minor fixes
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.9 (GNU/Linux)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=l5FF
-----END PGP SIGNATURE-----
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64
Pull ARM64 update from Catalin Marinas:
"Main features:
- Ticket-based spinlock implementation and lockless lockref support
- Big endian support
- CPU hotplug support, currently for PSCI (Power State Coordination
Interface) capable firmware
- Virtual address space extended to 42-bit in the 64K page
configuration (maximum VA space with 2 levels of page tables)
- Compat (AArch32) kuser helpers updated to ARMv8 (make use of
load-acquire/store-release instructions)
- Code cleanup, defconfig update and minor fixes"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64: (43 commits)
ARM64: /proc/interrupts: display IPIs of online CPUs only
arm64: locks: Remove CONFIG_GENERIC_LOCKBREAK
arm64: KVM: vgic: byteswap GICv2 access on world switch if BE
arm64: KVM: initialize HYP mode following the kernel endianness
arm64: compat: Clear the IT state independent of the 32-bit ARM or Thumb-2 mode
arm64: Use 42-bit address space with 64K pages
arm64: module: ensure instruction is little-endian before manipulation
arm64: defconfig: Enable CONFIG_PREEMPT by default
arm64: fix access to preempt_count from assembly code
arm64: move enabling of GIC before CPUs are set online
arm64: use generic RW_DATA_SECTION macro in linker script
arm64: Slightly improve the warning on CPU0 enable-method
ARM64: simplify cpu_read_bootcpu_ops using OF/DT helper
ARM64: DT: define ARM64 specific arch_match_cpu_phys_id
arm64: allow ioremap_cache() to use existing RAM mappings
arm64: update 32-bit kuser helpers to ARMv8
arm64: perf: fix event number mask
arm64: kconfig: allow CPU_BIG_ENDIAN to be selected
arm64: Fix the endianness of arch_spinlock_t
arm64: big-endian: write CPU holding pen address as LE
...
some clean ups and some patches to use the new generic lru list
code. There is still plenty of scope for some further changes in
due course - faster lookups of quota structures is very much
on the todo list. Also, a start has been made towards the more tricky
issue of using the generic lru code with glocks, but that will
have to be completed in a subsequent merge window.
The other, more minor feature, is that there have been a number of
performance patches which relate to block allocation. In particular
they will improve performance when the disk is nearly full.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=qwXe
-----END PGP SIGNATURE-----
Merge tag 'gfs2-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-3.0-nmw
Pull gfs2 updates from Steven Whitehouse:
"The main feature of interest this time is quota updates. There are
some clean ups and some patches to use the new generic lru list code.
There is still plenty of scope for some further changes in due course -
faster lookups of quota structures is very much on the todo list.
Also, a start has been made towards the more tricky issue of using the
generic lru code with glocks, but that will have to be completed in a
subsequent merge window.
The other, more minor feature, is that there have been a number of
performance patches which relate to block allocation. In particular
they will improve performance when the disk is nearly full"
* tag 'gfs2-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-3.0-nmw:
GFS2: Use generic list_lru for quota
GFS2: Rename quota qd_lru_lock qd_lock
GFS2: Use reflink for quota data cache
GFS2: Use lockref for glocks
GFS2: Protect quota sync generation
GFS2: Inline qd_trylock into gfs2_quota_unlock
GFS2: Make two similar quota code fragments into a function
GFS2: Remove obsolete quota tunable
GFS2: Move gfs2_icbit_munge into quota.c
GFS2: Speed up starting point selection for block allocation
GFS2: Add allocation parameters structure
GFS2: Clean up reservation removal
GFS2: fix dentry leaks
GFS2: new function gfs2_rbm_incr
GFS2: Introduce rbm field bii
GFS2: Do not reset flags on active reservations
GFS2: introduce bi_blocks for optimization
GFS2: optimize rbm_from_block wrt bi_start
GFS2: d_splice_alias() can't return error
1. copy_insn() doesn't look very nice, all calculations are
confusing and it is not immediately clear why do we read
the 2nd page first.
2. The usage of inode->i_size is wrong on 32-bit machines.
3. "Instruction at end of binary" logic is simply wrong, it
doesn't handle the case when uprobe->offset > inode->i_size.
In this case "bytes" overflows, and __copy_insn() writes to
the memory outside of uprobe->arch.insn.
Yes, uprobe_register() checks i_size_read(), but this file
can be truncated after that. All i_size checks are racy, we
do this only to catch the obvious mistakes.
Change copy_insn() to call __copy_insn() in a loop, simplify
and fix the bytes/nbytes calculations.
Note: we do not care if we read extra bytes after inode->i_size
if we got the valid page. This is fine because the task gets the
same page after page-fault, and arch_uprobe_analyze_insn() can't
know how many bytes were actually read anyway.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Commit aa59c53fd4 "uprobes: Change uprobe_copy_process() to dup
xol_area" has a stupid typo, we need to setup t->utask->vaddr but
the code wrongly uses current->utask.
Even with this bug dup_xol_work() works "in practice", but only
because get_unmapped_area(NULL, TASK_SIZE - PAGE_SIZE) likely
returns the same address every time.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
from a normal user account via the perf syscall "perf_event_open()".
When I was able to reproduce it with trinity, I was able to track down
exactly how it happened.
I discovered that the check for whether the function tracepoint should
be activated or not was using the "perf_paranoid_kernel()" check which
by default, lets the user continue. The user should not by default be
able to enable function tracing. The fix is to use
"perf_paranoid_tracepoint_raw()" which will not let the user enable
function tracing.
This is a security fix as normal users should never be allowed to
enable the function tracer.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.14 (GNU/Linux)
iQEcBAABAgAGBQJSepxvAAoJEKQekfcNnQGuLeQH/jMe/m3ogrf2NaryszjJ12rc
jyhxXL5tMYNWAY8mp5Dt7WIGgUcNFQFqGq8oNWwc0W/Snil0DHwzwGrbzg6+RMPL
S53qfQvrU0wuFSQu4NdRfhWnq7JaGbji8jbH+d2QdMj2FpktlqxTq8BZETFgJTes
Ex8NmU5paROuYeVNviPeqo5Ss4rPeQYmOE12B3rDhJFYvnzy37D11zO34GiVutoM
mSqSHO5UFig6u2fv347lBM04fBSUDRbK22iXP6kC/xtjgRJh60ElZsRzc5fFzcsQ
usLZ8IcybzpsEReXofFeLDVk98sZKioKYWpzerKwSc8RYDIIrQXaD94T/EDngV8=
=QJRi
-----END PGP SIGNATURE-----
Merge tag 'ftrace-urgent-3.12-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull perf/ftrace fix from Steven Rostedt:
"Dave Jones's trinity program was able to enable the function tracer
from a normal user account via the perf syscall "perf_event_open()".
When I was able to reproduce it with trinity, I was able to track down
exactly how it happened.
I discovered that the check for whether the function tracepoint should
be activated or not was using the "perf_paranoid_kernel()" check which
by default, lets the user continue. The user should not by default be
able to enable function tracing.
The fix is to use "perf_paranoid_tracepoint_raw()" which will not let
the user enable function tracing. This is a security fix as normal
users should never be allowed to enable the function tracer"
* tag 'ftrace-urgent-3.12-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
perf/ftrace: Fix paranoid level for enabling function tracer
Pull MIPS updates from Ralf Baechle:
- Some minor work bringing the Cobalt MIPS platforms in line with other
MIPS platforms
- Make vmlinux.32 and vmlinux.64 build messages less verbose
- Always register the R4k clocksource when selected, the clock source's
rating will decide if this or another clock source is actually going
to be used
- Drop support for the Cisco (formerly Scientific Atlanta) PowerTV
platform. There appears to be nobody left who cares and the USB
driver went stale while waiting for years to be merged
- Some cleanup of Loongson 2 related #ifdefery
- Various minor cleanups
- Major rework on all things related to tracing / ptrace on MIPS,
including switching the MIPS ELF core dumper to regsets, enabling the
entries for SIGSYS in struct siginfo for MIPS, enabling ftrace
syscall trace points
- Some more work to bring DECstation support code in line with other
more modern code
- Report the name of the detected CPU, not just its CP0 PrID value
- Some more BCM 47xx and atheros ath79xx work
- Support for compressed kernels using the XZ compression scheme
* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (53 commits)
MIPS: remove duplicate define
MIPS: Random whitespace clean-ups
MIPS: traps: Reformat notify_die invocations to 80 columns.
MIPS: Print correct PC in trace dump after NMI exception
MIPS: kernel: cpu-probe: Report CPU id during probe
MIPS: Remove unused defines in piix4.h
MIPS: Get rid of hard-coded values for Malta PIIX4 fixups
MIPS: Always register R4K clock when selected
MIPS: Loongson: Get rid of Loongson 2 #ifdefery all over arch/mips.
MIPS: cacheops.h: Increase indentation by one tab.
MIPS: Remove bogus BUG_ON()
MIPS: PowerTV: Remove support code.
MIPS: ftrace: Add support for syscall tracepoints.
MIPS: ptrace: Switch syscall reporting to tracehook_report_syscall_entry().
MIPS: Move audit_arch() helper function to __syscall_get_arch().
MIPS: Enable HAVE_ARCH_TRACEHOOK.
MIPS: Switch ELF core dumper to use regsets.
MIPS: Implement task_user_regset_view.
MIPS: ptrace: Use tracehook helpers.
MIPS: O32 / 32-bit: Always copy 4 stack arguments.
...
Pull s390 updates from Martin Schwidefsky:
"The bulk of the patches for the 3.13 merge window.
Heiko spent quite a bit of work to improve the code generation for the
kernel. That includes the exploitation of the interlocked-access
facility for the atomics and bitops implementation and the improvement
for the -march and -mtune compiler settings.
Another important change is the removal of the user_mode=home option,
user processes now always run in primary space. The storage keys are
not initialized at system startup any more, with that the storage key
removal work is complete. For the PCI support the hibernation hooks
have been implemented.
And as usual cleanup and fixes"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (62 commits)
s390/scm_blk: fix endless loop for requests != REQ_TYPE_FS
s390/mm,tlb: correct tlb flush on page table upgrade
s390/mm: page_table_realloc returns failure
s390: allow to set gcc -mtune flag
s390/percpu: remove this_cpu_xor() implementation
s390/vtime: correct idle time calculation
s390/time: fix get_tod_clock_ext inline assembly
tty/hvc_iucv: remove redundant NULL check
s390/dasd: Write to profile data area only if it is available
s390: convert use of typedef ctl_table to struct ctl_table
s390/pci: cleanup function information block
s390/pci: remove CONFIG_PCI_DEBUG dependancy
s390/pci: message cleanup
Update default configuration
s390: add a couple of useful defconfigs
s390/percpu: make use of interlocked-access facility 1 instructions
s390/percpu: use generic percpu ops for CONFIG_32BIT
s390/compat: make psw32_user_bits a constant value again
s390: fix handling of runtime instrumentation psw bit
s390: fix save and restore of the floating-point-control register
...
New defconfigs which should be able to boot on any 32/64bit machine.
Many drivers are selected to be compiled-in to avoid the need for an
additional initrd and still being able to boot.
Signed-off-by: Helge Deller <deller@gmx.de>
STI text console (sticon) was broken on 64bit machines with more than
4GB RAM and this lead in some cases to a kernel crash.
Since sticon uses the 32bit STI API it needs to keep pointers to memory
below 4GB. But on a 64bit kernel some memory regions (e.g. the kernel
stack) might be above 4GB which then may crash the kernel in the STI
functions.
Additionally sticon didn't selected the built-in framebuffer fonts by
default. This is now fixed.
On a side-note: Theoretically we could enhance the sticon driver to
use the 64bit STI API. But - beside the fact that some machines don't
provide a 64bit STI ROM - this would just add complexity.
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org # 3.8+
Clean up code to send correct signal on invalid memory accesses:
Send SIGBUS instead of SIGSEGV for memory accesses outside of mmap'ed
areas
This fixes the mmap13 testcase from the Linux Test Project.
Signed-off-by: Helge Deller <deller@gmx.de>
Up to now PA-RISC could live with a trivial version of access_ok().
Our fault handlers can correctly handle fault cases.
But testcases showed that we need a better access check else we won't
always return correct errno failure codes to userspace.
Problem showed up during 32bit userspace tests in which writev() used a
32bit memory area and length which would then wrap around on 64bit
kernel.
Signed-off-by: Helge Deller <deller@gmx.de>
In case we fail to power up other CPUs in a SMP system, the kernel
currently shows a wrong number of online CPUs. This change makes the
output more verbose on how many of the CPUs are online. Example:
CPU(s): 1 out of 2 PA8800 (Mako) at 900.000000 MHz online.
Signed-off-by: Helge Deller <deller@gmx.de>
The number of IPI calls is already visible as per-cpu IPI irq counters
in/proc/cpuinfo, so let's drop this additional counting.
This partly reverts:
cd85d55 parisc: more irq statistics in /proc/interrupts
Signed-off-by: Helge Deller <deller@gmx.de>
Each CPU has it's own Control Register 16 (CR16) which is used as time source
for the udelay() function. But since the CR16 registers across different CPUs
are not synced, we need to recalculate the loop count if we get switched away
to ensure that we really delay as much time as requested.
Signed-off-by: Helge Deller <deller@gmx.de>
This patch removes a duplicate define from
arch/parisc/math-emu/float.h
Signed-off-by: Michael Opdenacker <michael.opdenacker@free-electrons.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Install targets (install, zinstall, uinstall) on parisc have a
dependency to vmlinux. This may cause parts of the kernel to be rebuilt
during installation. We must avoid this since this may run as root.
Install targets "ABSOLUTELY MUST NOT MODIFY THE SOURCE TREE." as Linus
emphasized this in:
http://lkml.org/lkml/2013/7/10/600
So on parisc and maybe other archs we need the same as for x86:
1648e4f8 x86, kbuild: make "make install" not depend on vmlinux
This parisc patch was inspired by:
19514fc6 arm, kbuild: make "make install" not depend on vmlinux
Signed-off-by: Helge Deller <deller@gmx.de>
Provide a macro ASM_EXCEPTIONTABLE_ENTRY() to create exception table
entries and convert all open-coded places to use that macro.
This patch is a first step toward creating a exception table which only
holds 32bit pointers even on a 64bit kernel. That way in my own kernel
I was able to reduce the in-kernel exception table from 44kB to 22kB.
Signed-off-by: Helge Deller <deller@gmx.de>
Pull CIFS updates from Steve French:
"Includes a couple of fixes, plus changes to make multiplex identifiers
easier to read and correlate with network traces, and a set of
enhancements for SMB3 dialect. Also adds support for per-file
compression for both cifs and smb2/smb3 ("chattr +c filename).
Should have at least one other merge request ready by next week with
some new SMB3 security features and copy offload support"
* 'for-linus' of git://git.samba.org/sfrench/cifs-2.6:
Query network adapter info at mount time for debugging
Fix unused variable warning when CIFS POSIX disabled
Allow setting per-file compression via CIFS protocol
Query File System Alignment
Query device characteristics at mount time from server on SMB2/3 not just on cifs mounts
cifs: Send a logoff request before removing a smb session
cifs: Make big endian multiplex ID sequences monotonic on the wire
cifs: Remove redundant multiplex identifier check from check_smb_hdr()
Query file system attributes from server on SMB2, not just cifs, mounts
Allow setting per-file compression via SMB2/3
Fix corrupt SMB2 ioctl requests
Highlights include:
- Changes to the RPC socket code to allow NFSv4 to turn off timeout+retry
- Detect TCP connection breakage through the "keepalive" mechanism
- Add client side support for NFSv4.x migration (Chuck Lever)
- Add support for multiple security flavour arguments to the "sec=" mount
option (Dros Adamson)
- fs-cache bugfixes from David Howells:
- Fix an issue whereby caching can be enabled on a file that is open for
writing
- More NFSv4 open code stable bugfixes
- Various Labeled NFS (selinux) bugfixes, including one stable fix
- Fix buffer overflow checking in the RPCSEC_GSS upcall encoding
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.15 (GNU/Linux)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=gflJ
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-3.13-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client updates from Trond Myklebust:
"Highlights include:
- Changes to the RPC socket code to allow NFSv4 to turn off
timeout+retry:
* Detect TCP connection breakage through the "keepalive" mechanism
- Add client side support for NFSv4.x migration (Chuck Lever)
- Add support for multiple security flavour arguments to the "sec="
mount option (Dros Adamson)
- fs-cache bugfixes from David Howells:
* Fix an issue whereby caching can be enabled on a file that is
open for writing
- More NFSv4 open code stable bugfixes
- Various Labeled NFS (selinux) bugfixes, including one stable fix
- Fix buffer overflow checking in the RPCSEC_GSS upcall encoding"
* tag 'nfs-for-3.13-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (68 commits)
NFSv4.2: Remove redundant checks in nfs_setsecurity+nfs4_label_init_security
NFSv4: Sanity check the server reply in _nfs4_server_capabilities
NFSv4.2: encode_readdir - only ask for labels when doing readdirplus
nfs: set security label when revalidating inode
NFSv4.2: Fix a mismatch between Linux labeled NFS and the NFSv4.2 spec
NFS: Fix a missing initialisation when reading the SELinux label
nfs: fix oops when trying to set SELinux label
nfs: fix inverted test for delegation in nfs4_reclaim_open_state
SUNRPC: Cleanup xs_destroy()
SUNRPC: close a rare race in xs_tcp_setup_socket.
SUNRPC: remove duplicated include from clnt.c
nfs: use IS_ROOT not DCACHE_DISCONNECTED
SUNRPC: Fix buffer overflow checking in gss_encode_v0_msg/gss_encode_v1_msg
SUNRPC: gss_alloc_msg - choose _either_ a v0 message or a v1 message
SUNRPC: remove an unnecessary if statement
nfs: Use PTR_ERR_OR_ZERO in 'nfs/nfs4super.c'
nfs: Use PTR_ERR_OR_ZERO in 'nfs41_callback_up' function
nfs: Remove useless 'error' assignment
sunrpc: comment typo fix
SUNRPC: Add correct rcu_dereference annotation in rpc_clnt_set_transport
...
The non-IPI interrupts are displayed only for the online cpus from
show_interrupts in kernel/irq/proc.c before calling arch_show_interrupts().
As a result, the column headers and the IPI count don't match if any
CPU is offline.
This patch fixes show_ipi_list to display IPIs for online CPUs only.
Signed-off-by: Sudeep KarkadaNagesha <sudeep.karkadanagesha@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
. Fix version when building out of tree, as when using one of these:
$ make help | grep perf
perf-tar-src-pkg - Build perf-3.12.0.tar source tarball
perf-targz-src-pkg - Build perf-3.12.0.tar.gz source tarball
perf-tarbz2-src-pkg - Build perf-3.12.0.tar.bz2 source tarball
perf-tarxz-src-pkg - Build perf-3.12.0.tar.xz source tarball
$
from David Ahern.
. Don't relookup fields by name in each sample in 'trace'.
. 'perf record' code cleanups, from David Ahern.
. Remove unneeded include in sort.h, from Rodrigo Campos.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.14 (GNU/Linux)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=u5JX
-----END PGP SIGNATURE-----
Merge tag 'perf-core-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core
Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:
* Fix version when building out of tree, as when using one of these:
$ make help | grep perf
perf-tar-src-pkg - Build perf-3.12.0.tar source tarball
perf-targz-src-pkg - Build perf-3.12.0.tar.gz source tarball
perf-tarbz2-src-pkg - Build perf-3.12.0.tar.bz2 source tarball
perf-tarxz-src-pkg - Build perf-3.12.0.tar.xz source tarball
$
from David Ahern.
* Don't relookup fields by name in each sample in 'trace',
by Arnaldo Carvalho de Melo.
* 'perf record' code cleanups, from David Ahern.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
There is no point in sort.h including itself.
The include was added when the file was created, in commit "perf tools:
Create util/sort.and use it" (dd68ada2d) and added a include to "sort.h"
in lot of files (all the files that started using the file). It was
probably added by mistake on sort.h too.
Signed-off-by: Rodrigo Campos <rodrigo@sdfg.com.ar>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1383776454-10595-1-git-send-email-rodrigo@sdfg.com.ar
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Instead do the lookups just when creating the tracepoints, initially for
the most common, raw_syscalls:sys_{enter,exit}.
It works by having evsel->priv have a per tracepoint structure with
entries for the fields, for direct access, with the offset and a
function to get the value from the sample, doing the swap if needed.
Using a simple workload that does M millions write syscalls, we go from:
# perf stat -i -e cycles /tmp/oldperf trace ./sc_hello 100 > /dev/null
Performance counter stats for '/tmp/oldperf trace ./sc_hello 100':
8,366,771,459 cycles
2.668025928 seconds time elapsed
# perf stat -i -e cycles perf trace ./sc_hello 100 > /dev/null
Performance counter stats for 'perf trace ./sc_hello 100':
8,345,187,650 cycles
2.631748425 seconds time elapsed
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-eyfhvoo510a5i10b27dnvm88@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
