* Obsolete driver removals
- Removed obsolete adm1021 and max6642 drivers
* New drivers
- MPS MP2891
- MPS MP2993
- MPS MP9941
- MPS MP5920
- SPD5118 (Temperature Sensor and EEPROM)
* Added device support to existing drivers
- g762: G761
- dell-smm: Dell OptiPlex 7060
- asus-ec-sensors: ProArt X670E-CREATOR WIFI
- corsair-psu: HX1200i Series 2023 psu
- nzxt-smart2: Additional USB IS for NZXT RGB & Fan Controller
* Notable enhancements and fixes
- Removed use of i2c_match_id()
- Constified struct regmap_config where feasible
- Cleaned up amc6821 driver, and converted to use regmap and with_info API
- Converted max6639 driver to use with_info API; added support for
additional sysfs attributes
- Fixed various sysfs attribute underflows
- Added PEC support to hwmon core, and use in lm90 and max31827 drivers
* Various other minor fixes and improvements
-----BEGIN PGP SIGNATURE-----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=ebWS
-----END PGP SIGNATURE-----
Merge tag 'hwmon-for-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon updates from Guenter Roeck:
"Obsolete driver removals:
- Removed obsolete adm1021 and max6642 drivers
New drivers:
- MPS MP2891, MP2993, MP9941, and MP5920
- SPD5118 (Temperature Sensor and EEPROM)
Added device support to existing drivers:
- g762: G761
- dell-smm: Dell OptiPlex 7060
- asus-ec-sensors: ProArt X670E-CREATOR WIFI
- corsair-psu: HX1200i Series 2023 psu
- nzxt-smart2: Additional USB IS for NZXT RGB & Fan Controller
Notable enhancements and fixes:
- Removed use of i2c_match_id()
- Constified struct regmap_config where feasible
- Cleaned up amc6821 driver, and converted to use regmap and
with_info API
- Converted max6639 driver to use with_info API; added support for
additional sysfs attributes
- Fixed various sysfs attribute underflows
- Added PEC support to hwmon core, and use in lm90 and max31827
drivers
And various other minor fixes and improvements"
* tag 'hwmon-for-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (103 commits)
hwmon: (max6697) Fix swapped temp{1,8} critical alarms
hwmon: (max6697) Fix underflow when writing limit attributes
hwmon: Remove obsolete adm1021 and max6642 drivers
hwmon: (pmbus/ltc4286) Drop unused i2c device ids
hwmon: (g762) Initialize fans after configuring clock
hwmon: (amc6821) Add support for pwm1_mode attribute
hwmon: (amc6821) Convert to with_info API
hwmon: (amc6821) Convert to use regmap
hwmon: (amc6821) Drop unnecessary enum chips
hwmon: (amc6821) Use BIT() and GENMASK()
hwmon: (amc6821) Use tabs for column alignment in defines
hwmon: (amc6821) Reorder include files, drop unnecessary ones
hwmon: (amc6821) Add support for fan1_target and pwm1_enable mode 4
hwmon: (amc6821) Rename fan1_div to fan1_pulses
hwmon: (amc6821) Make reading and writing fan speed limits consistent
hwmon: (amc6821) Stop accepting invalid pwm values
hwmon: (w83627ehf) Fix underflows seen when writing limit attributes
hwmon: (nct6775-core) Fix underflows seen when writing limit attributes
hwmon: (lm95234) Fix underflows seen when writing limit attributes
hwmon: (adc128d818) Fix underflows seen when writing limit attributes
...
* New
- Add "cros_ec_hwmon" driver to expose fan speed and temperature.
- Add "cros_charge-control" driver to control charge thresholds and
behaviour.
- Add module parameter "log_poll_period_ms" in cros_ec_debugfs for
tuning the poll period.
- Support version 3 of EC_CMD_GET_NEXT_EVENT and keyboard matrix.
* Fixes
- Fix a race condition in accessing MEC (Microchip EC) memory between
ACPI and kernel. Serialize the memory access by an AML (ACPI
Machine Language) mutex.
- Fix an issue of wrong EC message version in cros_ec_debugfs.
* Misc
- Fix kernel-doc errors and cleanups.
-----BEGIN PGP SIGNATURE-----
iIkEABYKADEWIQS0yQeDP3cjLyifNRUrxTEGBto89AUCZo04zBMcdHp1bmdiaUBr
ZXJuZWwub3JnAAoJECvFMQYG2jz0bf0BAOjE7APATFsKLuFmtKxk/1XlsspsRTWK
vocdNAKuj9I5AQCdcrHcDreLz5ldqodCpOc4TXiZoLHIkELNQcQtOorhDw==
=To8o
-----END PGP SIGNATURE-----
Merge tag 'tag-chrome-platform-for-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux
Pull chrome platform updates from Tzung-Bi Shih:
"New code:
- Add "cros_ec_hwmon" driver to expose fan speed and temperature
- Add "cros_charge-control" driver to control charge thresholds and
behaviour
- Add module parameter "log_poll_period_ms" in cros_ec_debugfs for
tuning the poll period
- Support version 3 of EC_CMD_GET_NEXT_EVENT and keyboard matrix
Fixes:
- Fix a race condition in accessing MEC (Microchip EC) memory between
ACPI and kernel. Serialize the memory access by an AML (ACPI
Machine Language) mutex
- Fix an issue of wrong EC message version in cros_ec_debugfs
Misc:
- Fix kernel-doc errors and cleanups"
* tag 'tag-chrome-platform-for-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux: (28 commits)
power: supply: cros_charge-control: Fix signedness bug in charge_behaviour_store()
power: supply: cros_charge-control: Avoid accessing attributes out of bounds
power: supply: cros_charge-control: don't load if Framework control is present
power: supply: add ChromeOS EC based charge control driver
platform/chrome: cros_ec_proto: Introduce cros_ec_get_cmd_versions()
platform/chrome: Update binary interface for EC-based charge control
ACPI: battery: add devm_battery_hook_register()
dt-bindings: input: cros-ec-keyboard: Add keyboard matrix v3.0
platform/chrome: cros_ec_lpc: Handle zero length read/write
platform/chrome: cros_ec_lpc: Fix error code in cros_ec_lpc_mec_read_bytes()
platform/chrome: cros_ec_debugfs: fix wrong EC message version
platform/chrome: cros_ec_proto: update Kunit test for get_next_data_v3
platform/chrome: cros_ec_proto: add missing MODULE_DESCRIPTION() macro
hwmon: (cros_ec) Fix access to restricted __le16
hwmon: (cros_ec) Prevent read overflow in probe()
platform/chrome: cros_ec_lpc: Add quirks for Framework Laptop
platform/chrome: cros_ec_lpc: Add a new quirk for AML mutex
platform/chrome: cros_ec_lpc: Add a new quirk for ACPI id
platform/chrome: cros_ec_lpc: MEC access can use an AML mutex
platform/chrome: cros_ec_lpc: MEC access can return error code
...
The critical alarm bit for the local temperature sensor (temp1) is in
bit 7 of register 0x45 (not bit 6), and the critical alarm bit for remote
temperature sensor 7 (temp8) is in bit 6 (not bit 7).
This only affects MAX6581 since all other chips supported by this driver
do not support those critical alarms.
Fixes: 5372d2d71c ("hwmon: Driver for Maxim MAX6697 and compatibles")
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Using DIV_ROUND_CLOSEST() on an unbound value can result in underflows.
Indeed, module test scripts report:
temp1_max: Suspected underflow: [min=0, read 255000, written -9223372036854775808]
temp1_crit: Suspected underflow: [min=0, read 255000, written -9223372036854775808]
Fix by introducing an extra set of clamping.
Fixes: 5372d2d71c ("hwmon: Driver for Maxim MAX6697 and compatibles")
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
ADM1021, MAX6642, and compatible chips are supported by the lm90 driver.
Remove the obsolete stand-alone drivers to reduce maintenance overhead.
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Adding support for G761 included adding support for an internal clock.
Enabling the internal clock requires setting a bit in the FAN_CMD2
register. This is implemented in g762_fan_init(). However, g762_fan_init()
is called before clock support is selected, and the flag indicating that
the internal clock should be used is not yet set.
Initialize the clock before initializing the fan to solve the problem.
While at it, also add "g7621" to the i2c_device_id array.
Cc: Christian Marangi <ansuelsmth@gmail.com>
Fixes: 6ce402327a ("hwmon: g672: add support for g761")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
AMC6821 supports configuring if a fan is DC or PWM controlled.
Add support for the pwm1_mode attribute to make it runtime configurable.
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Convert to use with_info API to simplify the code and make it easier
to maintain. This also reduces code size by approximately 20%.
No functional change intended.
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Use regmap for register accesses and caching.
While at it, use sysfs_emit() instead of sprintf() to write sysfs
attribute data, and remove spurious debug messages which would only
be seen as result of a bug in the code. Also make sure that error
codes are propagated and not replaced with -EIO.
While at it, introduce rounding of written temperature values and for
internal calculations to reduce deviation from written values and as
much as possible.
No functional change intended except for differences introduced by
rounding.
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The driver only supports a single chip, so an enum
to determine the chip type is unnecessary. Drop it.
No functional change intended.
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Use BIT() and GENMASK() for bit and mask definitions
to help distinguish bit and mask definitions from other
defines and to make the code easier to read.
No functional change intended.
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Using tabs for column alignment makes the code easier to read.
No functional change intended.
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reorder include files to alphabetic order to simplify maintenance,
and drop the unnecessary kernel.h include.
No functional change intended.
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
After setting fan1_target and setting pwm1_enable to 4,
the fan controller tries to achieve the requested fan speed.
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The chip does not have a fan divisor. What it does have is a configuration
to set either 2 or 4 pulses per fan rotation. Rename the attribute to
reflect its use. Update documentation accordingly.
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The default value of the maximum fan speed limit register is 0,
essentially translating to an unlimited fan speed. When reading
the limit, a value of 0 is reported in this case. However, writing
a value of 0 results in writing a value of 0xffff into the register,
which is inconsistent.
To solve the problem, permit writing a limit of 0 for the maximim fan
speed, effectively translating to "no limit". Write 0 into the register
if a limit value of 0 is written. Otherwise limit the range to
<1..6000000> and write 1..0xffff into the register. This ensures that
reading and writing from and to a limit register return the same value
while at the same time not changing reported values when reading the
speed or limits.
While at it, restrict fan limit writes to non-negative numbers; writing
a negative limit does not make sense and should be reported instead of
being corrected.
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The pwm value range is well defined from 0..255. Don't accept any values
outside this range.
This changes the valid range of pwm1_auto_point2_pwm from 0..254 to 0..255,
meaning it can now be equivalent to not only pwm1_auto_point1_pwm (which is
always 0) but also to pwm1_auto_point3_pwm (which is always 255). While
that may not be practical, there seems to be no technical reason for
preventing a user from doing it.
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
DIV_ROUND_CLOSEST() after kstrtol() results in an underflow if a large
negative number such as -9223372036854775808 is provided by the user.
Fix it by reordering clamp_val() and DIV_ROUND_CLOSEST() operations.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
DIV_ROUND_CLOSEST() after kstrtol() results in an underflow if a large
negative number such as -9223372036854775808 is provided by the user.
Fix it by reordering clamp_val() and DIV_ROUND_CLOSEST() operations.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
DIV_ROUND_CLOSEST() after kstrtol() results in an underflow if a large
negative number such as -9223372036854775808 is provided by the user.
Fix it by reordering clamp_val() and DIV_ROUND_CLOSEST() operations.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
DIV_ROUND_CLOSEST() after kstrtol() results in an underflow if a large
negative number such as -9223372036854775808 is provided by the user.
Fix it by reordering clamp_val() and DIV_ROUND_CLOSEST() operations.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
LTC2991_T_INT_CH_NR is 4. The st->temp_en[] array has LTC2991_MAX_CHANNEL
(4) elements. Thus if "channel" is equal to LTC2991_T_INT_CH_NR then we
have read one element beyond the end of the array. Flip the conditions
around so that we check if "channel" is valid before using it as an array
index.
Fixes: 2b9ea4262a ("hwmon: Add driver for ltc2991")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/Zoa9Y_UMY4_ROfhF@stanley.mountain
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The big one here is we finally have Paul Cercueil's (and others)
DMA buffer support for IIO devices enabling high speed zero
copy transfer of data to and from sensors supported by IIO (and for
example USB). This should aid with upstream support of a range of
higher performance ADCs and DACs.
Two merges from other trees
- spi/spi_devm_optimize used for simplification in ad7944.
- dmaengine/topic_dma_vec to enable the DMABUF series.
One feature with impact outside IIO.
- Richer set of dev_err_probe() like helpers to cover ERR_PTR() cases.
New device support
==================
adi,ad7173
- Add support for AD4111, AD4112, AD4114, AD4115 and ADC4116 pseudo
differential ADCs. Major driver rework was needed to enabled these.
adi,ad7944
- Use devm_spi_optimize_message() to avoid a local devm cleanup
callback. This is the example case from the patch set, others will
follow.
mediatek,mt6359-auxadc
- New driver for this ADC IP found in MT6357, MT6358 and MT6359 PMICs.
st,accel
- Add support for the LIS2DS12 accelerometer
ti,ads1119
- New driver for this 16 bit 2-differential or 4-single ended channel
ADC.
Features
========
dt-bindings
- Introduce new common-mode-channel property to help handle pseudo
differential ADCs where we have something that looks like one side
of differential input, but which is only suited for use with a
slow moving reference.
adi,adf4350
- Support use as a clock provider.
iio-hmwon
- Support reading of labels from IIO devices by their consumers and
use this in the hwmon bridge.
Cleanup and minor fixes
=======================
Treewide
- Use regmap_clear_bits() / regmap_set_bits() to simplify open coded
equivalents.
- Use devm_regulator_get_enable_read_voltage() to replace equivalent
opencoded boilerplate. In some cases enabled complete conversion to
devm handling and removal of explicit remove() callbacks.
- Introduce dev_err_ptr_probe() and other variants and make use of
of them in a couple of examples driver cleanups. Will find use in
many more drivers soon.
adi,ad7192
- Introduce local struct device *dev and use dev_err_probe() to give
more readable code.
adi,adi-axi-adc/dac
- Improved consistency of messages using dev_err_probe()
adi,adis
- Split the trigger handling into cases that needed paging and those that
don't resulting in more readable code.
- Use cleanup.h to simplify error paths via scoped cleanup.
- Add adis specific lock helpers and make use of them in a number of drivers.
adi,ad7192
- Update maintainer (Alisa-Dariana Roman)
adi,ad7606
- dt-binding cleanup.
avago,apds9306
- Add a maintainer entry (Subhajit Ghosh)
linear,ltc2309
- Fix a wrong endian type.
st,stm32-dfsdm
- Fix a missing port property in the dt-binding.
st,sensors
- Relax whoami match failure to a warning print rather than probe failure.
This enables fallback compatibles to existing parts from those that don't
necessarily even exit yet.
-----BEGIN PGP SIGNATURE-----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=+9tp
-----END PGP SIGNATURE-----
Merge tag 'iio-for-6.11b' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next
Jonathan writes:
IIO: 2nd set of new device support, features and cleanup for 6.11
The big one here is we finally have Paul Cercueil's (and others)
DMA buffer support for IIO devices enabling high speed zero
copy transfer of data to and from sensors supported by IIO (and for
example USB). This should aid with upstream support of a range of
higher performance ADCs and DACs.
Two merges from other trees
- spi/spi_devm_optimize used for simplification in ad7944.
- dmaengine/topic_dma_vec to enable the DMABUF series.
One feature with impact outside IIO.
- Richer set of dev_err_probe() like helpers to cover ERR_PTR() cases.
New device support
==================
adi,ad7173
- Add support for AD4111, AD4112, AD4114, AD4115 and ADC4116 pseudo
differential ADCs. Major driver rework was needed to enabled these.
adi,ad7944
- Use devm_spi_optimize_message() to avoid a local devm cleanup
callback. This is the example case from the patch set, others will
follow.
mediatek,mt6359-auxadc
- New driver for this ADC IP found in MT6357, MT6358 and MT6359 PMICs.
st,accel
- Add support for the LIS2DS12 accelerometer
ti,ads1119
- New driver for this 16 bit 2-differential or 4-single ended channel
ADC.
Features
========
dt-bindings
- Introduce new common-mode-channel property to help handle pseudo
differential ADCs where we have something that looks like one side
of differential input, but which is only suited for use with a
slow moving reference.
adi,adf4350
- Support use as a clock provider.
iio-hmwon
- Support reading of labels from IIO devices by their consumers and
use this in the hwmon bridge.
Cleanup and minor fixes
=======================
Treewide
- Use regmap_clear_bits() / regmap_set_bits() to simplify open coded
equivalents.
- Use devm_regulator_get_enable_read_voltage() to replace equivalent
opencoded boilerplate. In some cases enabled complete conversion to
devm handling and removal of explicit remove() callbacks.
- Introduce dev_err_ptr_probe() and other variants and make use of
of them in a couple of examples driver cleanups. Will find use in
many more drivers soon.
adi,ad7192
- Introduce local struct device *dev and use dev_err_probe() to give
more readable code.
adi,adi-axi-adc/dac
- Improved consistency of messages using dev_err_probe()
adi,adis
- Split the trigger handling into cases that needed paging and those that
don't resulting in more readable code.
- Use cleanup.h to simplify error paths via scoped cleanup.
- Add adis specific lock helpers and make use of them in a number of drivers.
adi,ad7192
- Update maintainer (Alisa-Dariana Roman)
adi,ad7606
- dt-binding cleanup.
avago,apds9306
- Add a maintainer entry (Subhajit Ghosh)
linear,ltc2309
- Fix a wrong endian type.
st,stm32-dfsdm
- Fix a missing port property in the dt-binding.
st,sensors
- Relax whoami match failure to a warning print rather than probe failure.
This enables fallback compatibles to existing parts from those that don't
necessarily even exit yet.
* tag 'iio-for-6.11b' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (112 commits)
iio: adc: ad7173: Fix uninitialized symbol is_current_chan
iio: adc: Add support for MediaTek MT6357/8/9 Auxiliary ADC
math.h: Add unsigned 8 bits fractional numbers type
dt-bindings: iio: adc: Add MediaTek MT6359 PMIC AUXADC
iio: common: scmi_iio: convert to dev_err_probe()
iio: backend: make use of dev_err_cast_probe()
iio: temperature: ltc2983: convert to dev_err_probe()
dev_printk: add new dev_err_probe() helpers
iio: xilinx-ams: Add labels
iio: adc: ad7944: use devm_spi_optimize_message()
Documentation: iio: Document high-speed DMABUF based API
iio: buffer-dmaengine: Support new DMABUF based userspace API
iio: buffer-dma: Enable support for DMABUFs
iio: core: Add new DMABUF interface infrastructure
MAINTAINERS: Update AD7192 driver maintainer
iio: adc: ad7192: use devm_regulator_get_enable_read_voltage
iio: st_sensors: relax WhoAmI check in st_sensors_verify_id()
MAINTAINERS: Add AVAGO APDS9306
dt-bindings: iio: adc: adi,ad7606: comment and sort the compatible names
dt-bindings: iio: adc: adi,ad7606: add missing datasheet link
...
Add support for MPS Hot-Swap controller mp5920. This driver exposes
telemetry and limit value readings and writings.
Signed-off-by: Alex Vdovydchenko <xzeol@yahoo.com>
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20240702115252.981416-3-xzeol@yahoo.com
[groeck: Use min_t() to limit length of displayed model string]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
According to the comments on fan is disabled, we change to manual mode
and set the duty cycle to 0.
For setting the duty cycle part, the register is wrong. Fix it.
Fixes: 1c301fc539 ("hwmon: Add a driver for the ADT7475 hardware monitoring chip")
Signed-off-by: Wayne Tung <chineweff@gmail.com>
Link: https://lore.kernel.org/r/20240701073252.317397-1-chineweff@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Configuration register bit 5 must read 0 for all JC42.4 compliant chips.
Several capability register bits must be set for all TSE2004 compliant
chips. Use that information to strengthen the detect function.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
TSE2004av standardizes the device ID of compliant temperature sensors to
be 0x22xx, where xx is the device revision. Use a single define for all
TSE2004av compliant temperature sensors, and relax the device id mask to
match the upper 8 bit of the device id register.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Add labels from IIO channels to our channels. This allows userspace to
display more meaningful names instead of "in0" or "temp5".
Although lm-sensors gracefully handles errors when reading channel
labels, the ABI says the label attribute
> Should only be created if the driver has hints about what this voltage
> channel is being used for, and user-space doesn't.
Therefore, we test to see if the channel has a label before
creating the attribute.
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Link: https://patch.msgid.link/20240624174601.1527244-3-sean.anderson@linux.dev
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Instead of rescaling power channels after the fact, use the dedicated
scaling API. This should reduce any inaccuracies resulting from the
scaling.
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Link: https://lore.kernel.org/r/20240620212005.821805-1-sean.anderson@linux.dev
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The SPD5118 specification says, in its documentation of the page bits
in the MR11 register:
"
This register only applies to non-volatile memory (1024) Bytes) access of
SPD5 Hub device.
For volatile memory access, this register must be programmed to '000'.
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
"
Renesas/ITD SPD5118 hub controllers take this literally and disable access
to volatile memory if the page selected in MR11 is != 0. Since the BIOS or
ROMMON will access the non-volatile memory and likely select a page != 0,
this means that the driver will not instantiate since it can not identify
the chip. Even if the driver instantiates, access to volatile registers
is blocked after a nvram read operation which selects a page other than 0.
To solve the problem, add initialization code to select page 0 during
probe. Before doing that, use basic validation to ensure that this is
really a SPD5118 device and not some random EEPROM.
Cc: Sasha Kozachuk <skozachuk@google.com>
Cc: John Hamrick <johnham@google.com>
Cc: Chris Sarra <chrissarra@google.com>
Tested-by: Armin Wolf <W_Armin@gmx.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Using regmap for paging significantly improves caching since the regmap
cache no longer needs to be cleared after changing the page, so let's
use it.
Suggested-by: Armin Wolf <W_Armin@gmx.de>
Tested-by: Armin Wolf <W_Armin@gmx.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Update peci subsystem to use the same vendor-family-model
combined definition that core x86 code uses.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Iwona Winiarska <iwona.winiarska@intel.com>
Link: https://lore.kernel.org/r/20240529171920.62571-1-tony.luck@intel.com
Signed-off-by: Iwona Winiarska <iwona.winiarska@intel.com>
Update hwmon init with info instead of group. The hwmon info structure
in more flexible to describe sensor attribute & easy to maintian.
Signed-off-by: Naresh Solanki <naresh.solanki@9elements.com>
Link: https://lore.kernel.org/r/20240614055533.2735210-1-naresh.solanki@9elements.com
[groeck: Replace clamp_val() with range check when writing pwmX_input]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The INA230 has an Alert pin which is asserted when the alert
function selected in the Mask/Enable register exceeds the
value programmed into the Alert Limit register. Assertion is based
on the Alert Polarity Bit (APOL, bit 1 of the Mask/Enable register).
It is default set to value 0 i.e Normal (active-low open collector).
However, hardware can be designed in such a way that expects Alert pin
to become active high if a user-defined threshold in Alert limit
register has been exceeded. This patch adds a way to pass alert polarity
value to the driver via device tree.
Signed-off-by: Amna Waseem <Amna.Waseem@axis.com>
Link: https://lore.kernel.org/r/20240611-apol-ina2xx-fix-v4-2-8df1d2282fc5@axis.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
...to address the following warning:
drivers/hwmon/k10temp.c:104:9:
warning: macro is not used [-Wunused-macros]
No functional change is intended.
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20240606-fix-smn-bad-read-v4-7-ffde21931c3f@amd.com
Currently, k10temp_get_ccd_support() takes as input "pdev" and "data". However,
"pdev" is already included in "data". Furthermore, the "pdev" parameter is no
longer used in k10temp_get_ccd_support(), since its use was moved into
read_ccd_temp_reg().
Drop the "pdev" input parameter as it is no longer needed.
No functional change is intended.
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20240606-fix-smn-bad-read-v4-6-ffde21931c3f@amd.com
The CCD temperature register is read in two places. These reads are done
using an AMD SMN access, and a number of parameters are needed for the
operation.
Move the SMN access and parameter gathering into a helper function in order to
simplify the code flow. This also has a benefit of centralizing the hardware
register access in a single place in case fixes or special decoding is required.
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20240606-fix-smn-bad-read-v4-5-ffde21931c3f@amd.com
Check the return value of amd_smn_read() before saving a value. This
ensures invalid values aren't saved or used.
There are three cases here with slightly different behavior:
1) read_tempreg_nb_zen():
This is a function pointer which does not include a return code.
In this case, set the register value to 0 on failure. This
enforces Read-as-Zero behavior.
2) k10temp_read_temp():
This function does have return codes, so return the error code
from the failed register read. Continued operation is not
necessary, since there is no valid data from the register.
Furthermore, if the register value was set to 0, then the
following operation would underflow.
3) k10temp_get_ccd_support():
This function reads the same register from multiple CCD
instances in a loop. And a bitmask is formed if a specific bit
is set in each register instance. The loop should continue on a
failed register read, skipping the bit check.
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20240606-fix-smn-bad-read-v4-3-ffde21931c3f@amd.com
Commit ac0c26bae6 ("hwmon: (lm25066) Use i2c_get_match_data()") changed
enum chips to start with 1 instead of 0, under the assumption that
the data pointer in of_device_id must not start with 0 (NULL) if
i2c_get_match_data() is used. However, that is perfectly fine as long as
there is also an i2c_device_id array with the same data which is used
as fallback in that case.
Let enum chips start with 0 to avoid confusion against other drivers
where the enum starts with 0 and i2c_get_match_data() is used as well.
Cc: Rob Herring <robh@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Commit 10a0575ea0 ("hwmon: (nct6775-i2c) Use i2c_get_match_data()")
introduced calling i2c_get_match_data() to the nct6775 driver. As part
of that commit, enum kinds was changed to start with 1, based on
Adjust the 'kinds' enum to not use 0, so that no match data can be
distinguished from a valid enum value.
The patch had to be fixed later with commit 2792fc8f8c ("hwmon:
(nct6775-core) Explicitly initialize nct6775_device_names indexes") and
commit efe86092ab ("hwmon: (nct6775-platform) Explicitly initialize
nct6775_sio_names indexes").
Various patches submitted later show that the change from 0 to 1 is
not really necessary. As it turns out, it is perfectly fine as long as
there is an i2c_device_id array with the same data as in the of_device_id
array. This data is used as fallback if the data pointer in struct
of_device_id is NULL (0).
Let enum chips start with 0 to avoid confusion against other drivers
where the enum starts with 0 and i2c_get_match_data() is used as well.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Earlier it was assumed that the data pointer in of_device_id must not start
with 0 (NULL) if i2c_get_match_data() is used. However, it turns out that
this is perfectly fine as long as there is also an i2c_device_id array with
the same data, which is used as fallback in that case.
Let enum chips start with 0 to avoid confusion against other drivers
where the enum starts with 0 and i2c_get_match_data() is used as well.
While doing that, remove chip_id from struct mp2856_data since it is only
used in the probe function, and typecast the result of i2c_get_match_data()
to kernel_ulong_t to avoid the double typecast.
Cc: Peter Yin <peteryin.openbmc@gmail.com>
Cc: Potin Lai <potin.lai.pt@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
If a driver calls device_get_match_data(), the .data pointer in its id
data structures must not be NULL/0 because device_get_match_data()
returns NULL if an entry is not found. Explain that in a comment to avoid
confusion why this is required in this driver but not in other drivers.
Cc: Daniel Matyas <daniel.matyas@analog.com>
Acked-by: Nuno Sa <nuno.sa@analog.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
With SPD5118 chip detection for the most part handled by the i2c-smbus
core using DMI information, the spd5118 driver no longer needs to
auto-detect spd5118 compliant chips.
Auto-detection by the driver is still needed on systems with no DMI support
or on systems with more than eight DIMMs and can not be removed entirely.
However, it affects boot time and introduces the risk of mis-identifying
chips. Add configuration option to be able to disable it on systems where
chip detection is handled outside the driver.
Cc: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Tested-by: Armin Wolf <W_Armin@gmx.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Add support for reading SPD NVMEM data from SPD5118 (Jedec JESD300)
compliant memory modules. NVMEM write operation is not supported.
NVMEM support is optional. If CONFIG_NVMEM is disabled, the driver will
still instantiate but not provide NVMEM attribute files.
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Tested-by: Armin Wolf <W_Armin@gmx.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Add suspend/resume support to ensure that limit and configuration
registers are updated and synchronized after a suspend/resume cycle.
Cc: Armin Wolf <W_Armin@gmx.de>
Cc: Stephen Horvath <s.horvath@outlook.com.au>
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Tested-by: Stephen Horvath <s.horvath@outlook.com.au>
Tested-by: Armin Wolf <W_Armin@gmx.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Add support for SPD5118 (Jedec JESD300) compliant temperature
sensors. Such sensors are typically found on DDR5 memory modules.
Cc: René Rebe <rene@exactcode.de>
Cc: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Tested-by: Thomas Weißschuh <linux@weissschuh.net>
Tested-by: Stephen Horvath <s.horvath@outlook.com.au>
Tested-by: Armin Wolf <W_Armin@gmx.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/hwmon/asus_atk0110.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/hwmon/corsair-cpro.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/hwmon/mr75203.o
Add all missing invocations of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://lore.kernel.org/r/20240607-md-drivers-hwmon-v1-1-1ea6d6fe61e3@quicinc.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Switch to the _scoped() version introduced in commit 365130fd47
("device property: Introduce device_for_each_child_node_scoped()")
to remove the need for manual calling of fwnode_handle_put() in the
paths where the code exits the loop early.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20240404-hwmon_device_for_each_child_node_scoped-v1-2-53997abde43c@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Switch to the _scoped() version introduced in commit 365130fd47
("device property: Introduce device_for_each_child_node_scoped()")
to remove the need for manual calling of fwnode_handle_put() in the
paths where the code exits the loop early.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20240404-hwmon_device_for_each_child_node_scoped-v1-1-53997abde43c@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The function i2c_match_id() is used to fetch the matching ID from
the i2c_device_id table. This is often used to then retrieve the
matching driver_data. This can be done in one step with the helper
i2c_get_match_data().
This helper has a couple other benefits:
* It doesn't need the i2c_device_id passed in so we do not need
to have that forward declared, allowing us to remove those or
move the i2c_device_id table down to its more natural spot
with the other module info.
* It also checks for device match data, which allows for OF and
ACPI based probing. That means we do not have to manually check
those first and can remove those checks.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240403203633.914389-32-afd@ti.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The function i2c_match_id() is used to fetch the matching ID from
the i2c_device_id table. This is often used to then retrieve the
matching driver_data. This can be done in one step with the helper
i2c_get_match_data().
This helper has a couple other benefits:
* It doesn't need the i2c_device_id passed in so we do not need
to have that forward declared, allowing us to remove those or
move the i2c_device_id table down to its more natural spot
with the other module info.
* It also checks for device match data, which allows for OF and
ACPI based probing. That means we do not have to manually check
those first and can remove those checks.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240403203633.914389-31-afd@ti.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The function i2c_match_id() is used to fetch the matching ID from
the i2c_device_id table. This is often used to then retrieve the
matching driver_data. This can be done in one step with the helper
i2c_get_match_data().
This helper has a couple other benefits:
* It doesn't need the i2c_device_id passed in so we do not need
to have that forward declared, allowing us to remove those or
move the i2c_device_id table down to its more natural spot
with the other module info.
* It also checks for device match data, which allows for OF and
ACPI based probing. That means we do not have to manually check
those first and can remove those checks.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240403203633.914389-30-afd@ti.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The function i2c_match_id() is used to fetch the matching ID from
the i2c_device_id table. This is often used to then retrieve the
matching driver_data. This can be done in one step with the helper
i2c_get_match_data().
This helper has a couple other benefits:
* It doesn't need the i2c_device_id passed in so we do not need
to have that forward declared, allowing us to remove those or
move the i2c_device_id table down to its more natural spot
with the other module info.
* It also checks for device match data, which allows for OF and
ACPI based probing. That means we do not have to manually check
those first and can remove those checks.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240403203633.914389-29-afd@ti.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The function i2c_match_id() is used to fetch the matching ID from
the i2c_device_id table. This is often used to then retrieve the
matching driver_data. This can be done in one step with the helper
i2c_get_match_data().
This helper has a couple other benefits:
* It doesn't need the i2c_device_id passed in so we do not need
to have that forward declared, allowing us to remove those or
move the i2c_device_id table down to its more natural spot
with the other module info.
* It also checks for device match data, which allows for OF and
ACPI based probing. That means we do not have to manually check
those first and can remove those checks.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240403203633.914389-28-afd@ti.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The function i2c_match_id() is used to fetch the matching ID from
the i2c_device_id table. This is often used to then retrieve the
matching driver_data. This can be done in one step with the helper
i2c_get_match_data().
This helper has a couple other benefits:
* It doesn't need the i2c_device_id passed in so we do not need
to have that forward declared, allowing us to remove those or
move the i2c_device_id table down to its more natural spot
with the other module info.
* It also checks for device match data, which allows for OF and
ACPI based probing. That means we do not have to manually check
those first and can remove those checks.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240403203633.914389-27-afd@ti.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The function i2c_match_id() is used to fetch the matching ID from
the i2c_device_id table. This is often used to then retrieve the
matching driver_data. This can be done in one step with the helper
i2c_get_match_data().
This helper has a couple other benefits:
* It doesn't need the i2c_device_id passed in so we do not need
to have that forward declared, allowing us to remove those or
move the i2c_device_id table down to its more natural spot
with the other module info.
* It also checks for device match data, which allows for OF and
ACPI based probing. That means we do not have to manually check
those first and can remove those checks.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240403203633.914389-26-afd@ti.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The function i2c_match_id() is used to fetch the matching ID from
the i2c_device_id table. This is often used to then retrieve the
matching driver_data. This can be done in one step with the helper
i2c_get_match_data().
This helper has a couple other benefits:
* It doesn't need the i2c_device_id passed in so we do not need
to have that forward declared, allowing us to remove those or
move the i2c_device_id table down to its more natural spot
with the other module info.
* It also checks for device match data, which allows for OF and
ACPI based probing. That means we do not have to manually check
those first and can remove those checks.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240403203633.914389-25-afd@ti.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The function i2c_match_id() is used to fetch the matching ID from
the i2c_device_id table. This is often used to then retrieve the
matching driver_data. This can be done in one step with the helper
i2c_get_match_data().
This helper has a couple other benefits:
* It doesn't need the i2c_device_id passed in so we do not need
to have that forward declared, allowing us to remove those or
move the i2c_device_id table down to its more natural spot
with the other module info.
* It also checks for device match data, which allows for OF and
ACPI based probing. That means we do not have to manually check
those first and can remove those checks.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240403203633.914389-24-afd@ti.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The function i2c_match_id() is used to fetch the matching ID from
the i2c_device_id table. This is often used to then retrieve the
matching driver_data. This can be done in one step with the helper
i2c_get_match_data().
This helper has a couple other benefits:
* It doesn't need the i2c_device_id passed in so we do not need
to have that forward declared, allowing us to remove those or
move the i2c_device_id table down to its more natural spot
with the other module info.
* It also checks for device match data, which allows for OF and
ACPI based probing. That means we do not have to manually check
those first and can remove those checks.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240403203633.914389-23-afd@ti.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The function i2c_match_id() is used to fetch the matching ID from
the i2c_device_id table. This is often used to then retrieve the
matching driver_data. This can be done in one step with the helper
i2c_get_match_data().
This helper has a couple other benefits:
* It doesn't need the i2c_device_id passed in so we do not need
to have that forward declared, allowing us to remove those or
move the i2c_device_id table down to its more natural spot
with the other module info.
* It also checks for device match data, which allows for OF and
ACPI based probing. That means we do not have to manually check
those first and can remove those checks.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240403203633.914389-22-afd@ti.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The function i2c_match_id() is used to fetch the matching ID from
the i2c_device_id table. This is often used to then retrieve the
matching driver_data. This can be done in one step with the helper
i2c_get_match_data().
This helper has a couple other benefits:
* It doesn't need the i2c_device_id passed in so we do not need
to have that forward declared, allowing us to remove those or
move the i2c_device_id table down to its more natural spot
with the other module info.
* It also checks for device match data, which allows for OF and
ACPI based probing. That means we do not have to manually check
those first and can remove those checks.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240403203633.914389-21-afd@ti.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The function i2c_match_id() is used to fetch the matching ID from
the i2c_device_id table. This is often used to then retrieve the
matching driver_data. This can be done in one step with the helper
i2c_get_match_data().
This helper has a couple other benefits:
* It doesn't need the i2c_device_id passed in so we do not need
to have that forward declared, allowing us to remove those or
move the i2c_device_id table down to its more natural spot
with the other module info.
* It also checks for device match data, which allows for OF and
ACPI based probing. That means we do not have to manually check
those first and can remove those checks.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240403203633.914389-20-afd@ti.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The function i2c_match_id() is used to fetch the matching ID from
the i2c_device_id table. This is often used to then retrieve the
matching driver_data. This can be done in one step with the helper
i2c_get_match_data().
This helper has a couple other benefits:
* It doesn't need the i2c_device_id passed in so we do not need
to have that forward declared, allowing us to remove those or
move the i2c_device_id table down to its more natural spot
with the other module info.
* It also checks for device match data, which allows for OF and
ACPI based probing. That means we do not have to manually check
those first and can remove those checks.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240403203633.914389-19-afd@ti.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The function i2c_match_id() is used to fetch the matching ID from
the i2c_device_id table. This is often used to then retrieve the
matching driver_data. This can be done in one step with the helper
i2c_get_match_data().
This helper has a couple other benefits:
* It doesn't need the i2c_device_id passed in so we do not need
to have that forward declared, allowing us to remove those or
move the i2c_device_id table down to its more natural spot
with the other module info.
* It also checks for device match data, which allows for OF and
ACPI based probing. That means we do not have to manually check
those first and can remove those checks.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240403203633.914389-18-afd@ti.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The function i2c_match_id() is used to fetch the matching ID from
the i2c_device_id table. This is often used to then retrieve the
matching driver_data. This can be done in one step with the helper
i2c_get_match_data().
This helper has a couple other benefits:
* It doesn't need the i2c_device_id passed in so we do not need
to have that forward declared, allowing us to remove those or
move the i2c_device_id table down to its more natural spot
with the other module info.
* It also checks for device match data, which allows for OF and
ACPI based probing. That means we do not have to manually check
those first and can remove those checks.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240403203633.914389-17-afd@ti.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The function i2c_match_id() is used to fetch the matching ID from
the i2c_device_id table. This is often used to then retrieve the
matching driver_data. This can be done in one step with the helper
i2c_get_match_data().
This helper has a couple other benefits:
* It doesn't need the i2c_device_id passed in so we do not need
to have that forward declared, allowing us to remove those or
move the i2c_device_id table down to its more natural spot
with the other module info.
* It also checks for device match data, which allows for OF and
ACPI based probing. That means we do not have to manually check
those first and can remove those checks.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240403203633.914389-16-afd@ti.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The function i2c_match_id() is used to fetch the matching ID from
the i2c_device_id table. This is often used to then retrieve the
matching driver_data. This can be done in one step with the helper
i2c_get_match_data().
This helper has a couple other benefits:
* It doesn't need the i2c_device_id passed in so we do not need
to have that forward declared, allowing us to remove those or
move the i2c_device_id table down to its more natural spot
with the other module info.
* It also checks for device match data, which allows for OF and
ACPI based probing. That means we do not have to manually check
those first and can remove those checks.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240403203633.914389-15-afd@ti.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The function i2c_match_id() is used to fetch the matching ID from
the i2c_device_id table. This is often used to then retrieve the
matching driver_data. This can be done in one step with the helper
i2c_get_match_data().
This helper has a couple other benefits:
* It doesn't need the i2c_device_id passed in so we do not need
to have that forward declared, allowing us to remove those or
move the i2c_device_id table down to its more natural spot
with the other module info.
* It also checks for device match data, which allows for OF and
ACPI based probing. That means we do not have to manually check
those first and can remove those checks.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240403203633.914389-14-afd@ti.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The function i2c_match_id() is used to fetch the matching ID from
the i2c_device_id table. This is often used to then retrieve the
matching driver_data. This can be done in one step with the helper
i2c_get_match_data().
This helper has a couple other benefits:
* It doesn't need the i2c_device_id passed in so we do not need
to have that forward declared, allowing us to remove those or
move the i2c_device_id table down to its more natural spot
with the other module info.
* It also checks for device match data, which allows for OF and
ACPI based probing. That means we do not have to manually check
those first and can remove those checks.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240403203633.914389-13-afd@ti.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The function i2c_match_id() is used to fetch the matching ID from
the i2c_device_id table. This is often used to then retrieve the
matching driver_data. This can be done in one step with the helper
i2c_get_match_data().
This helper has a couple other benefits:
* It doesn't need the i2c_device_id passed in so we do not need
to have that forward declared, allowing us to remove those or
move the i2c_device_id table down to its more natural spot
with the other module info.
* It also checks for device match data, which allows for OF and
ACPI based probing. That means we do not have to manually check
those first and can remove those checks.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240403203633.914389-12-afd@ti.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The function i2c_match_id() is used to fetch the matching ID from
the i2c_device_id table. This is often used to then retrieve the
matching driver_data. This can be done in one step with the helper
i2c_get_match_data().
This helper has a couple other benefits:
* It doesn't need the i2c_device_id passed in so we do not need
to have that forward declared, allowing us to remove those or
move the i2c_device_id table down to its more natural spot
with the other module info.
* It also checks for device match data, which allows for OF and
ACPI based probing. That means we do not have to manually check
those first and can remove those checks.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240403203633.914389-11-afd@ti.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The function i2c_match_id() is used to fetch the matching ID from
the i2c_device_id table. This is often used to then retrieve the
matching driver_data. This can be done in one step with the helper
i2c_get_match_data().
This helper has a couple other benefits:
* It doesn't need the i2c_device_id passed in so we do not need
to have that forward declared, allowing us to remove those or
move the i2c_device_id table down to its more natural spot
with the other module info.
* It also checks for device match data, which allows for OF and
ACPI based probing. That means we do not have to manually check
those first and can remove those checks.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240403203633.914389-10-afd@ti.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The function i2c_match_id() is used to fetch the matching ID from
the i2c_device_id table. This is often used to then retrieve the
matching driver_data. This can be done in one step with the helper
i2c_get_match_data().
This helper has a couple other benefits:
* It doesn't need the i2c_device_id passed in so we do not need
to have that forward declared, allowing us to remove those or
move the i2c_device_id table down to its more natural spot
with the other module info.
* It also checks for device match data, which allows for OF and
ACPI based probing. That means we do not have to manually check
those first and can remove those checks.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240403203633.914389-9-afd@ti.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The function i2c_match_id() is used to fetch the matching ID from
the i2c_device_id table. This is often used to then retrieve the
matching driver_data. This can be done in one step with the helper
i2c_get_match_data().
This helper has a couple other benefits:
* It doesn't need the i2c_device_id passed in so we do not need
to have that forward declared, allowing us to remove those or
move the i2c_device_id table down to its more natural spot
with the other module info.
* It also checks for device match data, which allows for OF and
ACPI based probing. That means we do not have to manually check
those first and can remove those checks.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240403203633.914389-8-afd@ti.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The function i2c_match_id() is used to fetch the matching ID from
the i2c_device_id table. This is often used to then retrieve the
matching driver_data. This can be done in one step with the helper
i2c_get_match_data().
This helper has a couple other benefits:
* It doesn't need the i2c_device_id passed in so we do not need
to have that forward declared, allowing us to remove those or
move the i2c_device_id table down to its more natural spot
with the other module info.
* It also checks for device match data, which allows for OF and
ACPI based probing. That means we do not have to manually check
those first and can remove those checks.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240403203633.914389-7-afd@ti.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The function i2c_match_id() is used to fetch the matching ID from
the i2c_device_id table. This is often used to then retrieve the
matching driver_data. This can be done in one step with the helper
i2c_get_match_data().
This helper has a couple other benefits:
* It doesn't need the i2c_device_id passed in so we do not need
to have that forward declared, allowing us to remove those or
move the i2c_device_id table down to its more natural spot
with the other module info.
* It also checks for device match data, which allows for OF and
ACPI based probing. That means we do not have to manually check
those first and can remove those checks.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240403203633.914389-6-afd@ti.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The function i2c_match_id() is used to fetch the matching ID from
the i2c_device_id table. This is often used to then retrieve the
matching driver_data. This can be done in one step with the helper
i2c_get_match_data().
This helper has a couple other benefits:
* It doesn't need the i2c_device_id passed in so we do not need
to have that forward declared, allowing us to remove those or
move the i2c_device_id table down to its more natural spot
with the other module info.
* It also checks for device match data, which allows for OF and
ACPI based probing. That means we do not have to manually check
those first and can remove those checks.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240403203633.914389-5-afd@ti.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The function i2c_match_id() is used to fetch the matching ID from
the i2c_device_id table. This is often used to then retrieve the
matching driver_data. This can be done in one step with the helper
i2c_get_match_data().
This helper has a couple other benefits:
* It doesn't need the i2c_device_id passed in so we do not need
to have that forward declared, allowing us to remove those or
move the i2c_device_id table down to its more natural spot
with the other module info.
* It also checks for device match data, which allows for OF and
ACPI based probing. That means we do not have to manually check
those first and can remove those checks.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240403203633.914389-4-afd@ti.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The function i2c_match_id() is used to fetch the matching ID from
the i2c_device_id table. This is often used to then retrieve the
matching driver_data. This can be done in one step with the helper
i2c_get_match_data().
This helper has a couple other benefits:
* It doesn't need the i2c_device_id passed in so we do not need
to have that forward declared, allowing us to remove those or
move the i2c_device_id table down to its more natural spot
with the other module info.
* It also checks for device match data, which allows for OF and
ACPI based probing. That means we do not have to manually check
those first and can remove those checks.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240403203633.914389-3-afd@ti.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The function i2c_match_id() is used to fetch the matching ID from
the i2c_device_id table. This is often used to then retrieve the
matching driver_data. This can be done in one step with the helper
i2c_get_match_data().
This helper has a couple other benefits:
* It doesn't need the i2c_device_id passed in so we do not need
to have that forward declared, allowing us to remove those or
move the i2c_device_id table down to its more natural spot
with the other module info.
* It also checks for device match data, which allows for OF and
ACPI based probing. That means we do not have to manually check
those first and can remove those checks.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240403203633.914389-2-afd@ti.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Use spi_get_device_match_data() helper to simplify a bit the driver.
Also kernel_ulong_t type is preferred for kernel code over uintptr_t
(needed for the cast).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240606142515.132504-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The "resp.sensor_name" comes from cros_ec_cmd() and it hasn't necessarily
been NUL terminated. We had not intended to read past "sensor_name_size"
bytes, however, there is a width vs precision bug in the format string.
The format needs to be precision '%.*s' instead of width '%*s'.
Precision prevents an out of bounds read, but width is a no-op.
Fixes: bc3e452580 ("hwmon: add ChromeOS EC driver")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/42331b70-bd3c-496c-8c79-3ec4faad40b8@moroto.mountain
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Add support for g761 PWM Fan Controller.
The g761 is a copy of the g763 with the only difference of supporting
and internal clock. The internal clock is used if no clocks property is
defined in device node and in such case the required bit is enabled and
clock handling is skipped.
The internal clock oscillator runs at 31KHz.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Link: https://lore.kernel.org/r/20240604164348.542-3-ansuelsmth@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Several hardware monitoring chips optionally support Packet Error Checking
(PEC). For some chips, PEC support can be enabled simply by setting
I2C_CLIENT_PEC in the i2c client data structure. Others require chip
specific code to enable or disable PEC support.
Introduce hwmon_chip_pec and HWMON_C_PEC to simplify adding configurable
PEC support for hardware monitoring drivers. A driver can set HWMON_C_PEC
in its chip information data to indicate PEC support. If a chip requires
chip specific code to enable or disable PEC support, the driver only needs
to implement support for the hwmon_chip_pec attribute to its write
function.
Packet Error Checking is only supported for SMBus devices. HWMON_C_PEC
must therefore only be set by a driver if the parent device is an I2C
device. Attempts to set HWMON_C_PEC on any other device type is not
supported and rejected.
The code calls i2c_check_functionality() to check if PEC is supported
by the I2C/SMBus controller. This function is only available if CONFIG_I2C
is enabled and reachable. For this reason, the added code needs to depend
on reachability of CONFIG_I2C.
Cc: Radu Sabau <radu.sabau@analog.com>
Acked-by: Nuno Sa <nuno.sa@analog.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The ChromeOS Embedded Controller exposes fan speed and temperature
readings.
Expose this data through the hwmon subsystem.
The driver is designed to be probed via the cros_ec mfd device.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20240529-cros_ec-hwmon-v4-2-5cdf0c5db50a@weissschuh.net
[tzungbi: Fixed typo in MAINTAINERS: "chros_ec_hwmon" -> "cros_ec_hwmon"]
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
The property name is "sensirion,low-precision", not
"sensicon,low-precision".
Cc: Chris Ruehl <chris.ruehl@gtsys.com.hk>
Fixes: be7373b60d ("hwmon: shtc1: add support for device tree bindings")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The Intel N6000 BMC outputs the board power value in milliwatt, whereas
the hwmon sysfs interface must provide power values in microwatt.
Fixes: e1983220ae ("hwmon: intel-m10-bmc-hwmon: Add N6000 sensors")
Signed-off-by: Peter Colberg <peter.colberg@intel.com>
Reviewed-by: Matthew Gerlach <matthew.gerlach@linux.intel.com>
Link: https://lore.kernel.org/r/20240521181246.683833-1-peter.colberg@intel.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Add support for NZXT RGB & Fan Controller with USB ID 1e71:2020.
Fan speed control reported to be working with existing userspace (hidraw)
software, so it should be compatible. Fan channel count is the same.
No known differences from already supported devices, at least regarding
fan speed control and initialization.
Signed-off-by: Aleksandr Mezin <mezin.alexander@gmail.com>
Link: https://lore.kernel.org/r/20240524004040.121044-1-mezin.alexander@gmail.com
[groeck: Adjusted subject and description]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
A new error path was added to the fwnode_for_each_available_node() loop
in ltc2992_parse_dt(), which leads to an early return that requires a
call to fwnode_handle_put() to avoid a memory leak in that case.
Add the missing fwnode_handle_put() in the error path from a zero value
shunt resistor.
Cc: stable@vger.kernel.org
Fixes: 10b0290204 ("hwmon: (ltc2992) Avoid division by zero")
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20240523-fwnode_for_each_available_child_node_scoped-v2-1-701f3a03f2fb@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Add the usb id of the HX1200i Series 2023. Update the documentation
accordingly. Also fix the version comments, there are no Series 2022
products. That are legacy or first version products going back many
many years.
Signed-off-by: Wilken Gottwalt <wilken.gottwalt@posteo.net>
Link: https://lore.kernel.org/r/ZlAZs4u0dU7JxtDf@monster.localdomain
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Enabling the driver for devices with unknown customer ID is at least
somewhat risky, so add a warning to the kernel log.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Add support for reporting firmware and bootloader version using debugfs.
Update documentation accordingly.
Signed-off-by: Marius Zachmann <mail@mariuszachmann.de>
Link: https://lore.kernel.org/r/20240513194734.43040-2-mail@mariuszachmann.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Here is the small set of driver core and kernfs changes for 6.10-rc1.
Nothing major here at all, just a small set of changes for some driver
core apis, and minor fixups. Included in here are:
- sysfs_bin_attr_simple_read() helper added and used
- device_show_string() helper added and used
All usages of these were acked by the various maintainers. Also in here
are:
- kernfs minor cleanup
- removed unused functions
- typo fix in documentation
- pay attention to sysfs_create_link() failures in module.c finally.
All of these have been in linux-next for a very long time with no
reported problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZk3+hQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylfTwCfUyHWkDZuZ7ehdtjzfmcd4EKZBK8An3AAV99G
ox8PXMxuFTaUEdT/69FQ
=2sEo
-----END PGP SIGNATURE-----
Merge tag 'driver-core-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the small set of driver core and kernfs changes for 6.10-rc1.
Nothing major here at all, just a small set of changes for some driver
core apis, and minor fixups. Included in here are:
- sysfs_bin_attr_simple_read() helper added and used
- device_show_string() helper added and used
All usages of these were acked by the various maintainers. Also in
here are:
- kernfs minor cleanup
- removed unused functions
- typo fix in documentation
- pay attention to sysfs_create_link() failures in module.c finally
All of these have been in linux-next for a very long time with no
reported problems"
* tag 'driver-core-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
device property: Fix a typo in the description of device_get_child_node_count()
kernfs: mount: Remove unnecessary ‘NULL’ values from knparent
scsi: Use device_show_string() helper for sysfs attributes
platform/x86: Use device_show_string() helper for sysfs attributes
perf: Use device_show_string() helper for sysfs attributes
IB/qib: Use device_show_string() helper for sysfs attributes
hwmon: Use device_show_string() helper for sysfs attributes
driver core: Add device_show_string() helper for sysfs attributes
treewide: Use sysfs_bin_attr_simple_read() helper
sysfs: Add sysfs_bin_attr_simple_read() helper
module: don't ignore sysfs_create_link() failures
driver core: Remove unused platform_notify, platform_notify_remove
Apart for the normal updates for dt bindings, cleanups and support for
new device variants to existing drivers this completes the conversion to
pwmchip_alloc() which was started in the v6.9 development cycle.
Using pwmchip_alloc() is a precondition to the character device support
which allows easier and faster access to PWM devices. However there are
some issues I want to clean up before including it in mainline, so this
isn't contained here despite it was in next for some time.
Thanks to Alexandre Mergnat, Binbin Zhou, Dmitry Rokosov, George Stark,
Jerome Brunet and Varshini Rajendran for their contributions. Further
thanks go to AngeloGioacchino Del Regno, Conor Dooley, David Lechner,
Fabrice Gasnier, Florian Fainelli, Guenter Roeck, Gustavo A. R. Silva,
Krzysztof Kozlowski and Rob Herring for valuable patch review.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEP4GsaTp6HlmJrf7Tj4D7WH0S/k4FAmZBz1cACgkQj4D7WH0S
/k4lXQf9HTSvbCz4x6PAxXPEe5trXlnUxGUsPa73mj2bVV8jpnJIy3vIrzZ0C2BG
dV6Pfo4rLZYdjFQJW3CalfQShmDXwBWhAbQ7jupt3CdJsZC8Uoqt3R9hJA6A2sp+
g8JkHZ3YateggLIUWWyOosanSGdzLKayOXtmjhHeywD+VTMAjHNglYlB8XjqzbnC
ti4F4Q4pJjjvap9oT6sKPGH05J43Z8LDJ3zo/0oQfo1NV5pPfxcBs6GqzuWROaW9
DHWovz/KV06oYfiHHmtgxQxC6HO1J4lUQTMoF2kjcRmVwqeZXPWn8l1mmpQynJ/P
94bixYQUUT+V2B0snhgnzEJNN6vEvw==
=JaHr
-----END PGP SIGNATURE-----
Merge tag 'pwm/for-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux
Pull pwm updates from Uwe Kleine-König:
"Apart for the normal updates for dt bindings, cleanups and support for
new device variants to existing drivers this completes the conversion
to pwmchip_alloc() which was started in the v6.9 development cycle.
Using pwmchip_alloc() is a precondition to the character device
support which allows easier and faster access to PWM devices. However
there are some issues I want to clean up before including it in
mainline, so this isn't contained here despite it was in next for some
time.
Thanks to Alexandre Mergnat, Binbin Zhou, Dmitry Rokosov, George
Stark, Jerome Brunet and Varshini Rajendran for their contributions.
Further thanks go to AngeloGioacchino Del Regno, Conor Dooley, David
Lechner, Fabrice Gasnier, Florian Fainelli, Guenter Roeck, Gustavo A.
R. Silva, Krzysztof Kozlowski and Rob Herring for valuable patch
review"
* tag 'pwm/for-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux: (34 commits)
pwm: pca9685: Drop explicit initialization of struct i2c_device_id::driver_data to 0
dt-bindings: pwm: snps,dw-apb-timers: Do not require pwm-cells twice
dt-bindings: pwm: mediatek,pwm-disp: Do not require pwm-cells twice
dt-bindings: pwm: mediatek,mt2712: Do not require pwm-cells twice
dt-bindings: pwm: marvell,pxa: Do not require pwm-cells twice
dt-bindings: pwm: google,cros-ec: Do not require pwm-cells twice
dt-bindings: pwm: bcm2835: Do not require pwm-cells twice
pwm: meson: Use mul_u64_u64_div_u64() for frequency calculating
pwm: meson: Add check for error from clk_round_rate()
pwm: meson: Drop unneeded check in .get_state()
dt-bindings: pwm: mediatek,pwm-disp: add compatible for mt8365 SoC
pwm: meson: Add generic compatible for meson8 to sm1
pwm: bcm2835: Drop open coded variant of devm_clk_rate_exclusive_get()
pwm: bcm2835: Introduce a local variable for &pdev->dev
pwm: stm32: Calculate prescaler with a division instead of a loop
pwm: stm32: Fix for settings using period > UINT32_MAX
pwm: stm32: Improve precision of calculation in .apply()
pwm: stm32: Add error messages in .probe()'s error paths
pwm: Make pwmchip_[sg]et_drvdata() a wrapper around dev_set_drvdata()
pwm: Don't check pointer for being non-NULL after use
...
* New drivers
- Infineon XDP710
- EC Chip driver for Lenovo ThinkStation motherboards
- Analog Devices ADP1050
* Improved support for existing drivers
- emc1403: Convert to with_info API; Support for EMC1428 and EMC1438
- nzxt-kraken3: Support for NZXT Kraken 2023
- aquacomputer_d5next: Support for Octo flow sensors
- pmbus/adm1275: Support for ADM1281
- dell-smm: Supportt for Precision 7540 and G5 5505
* Other notable cleanup
- max6639: Use regmap
- Remove unused structure fields from multiple drivers
- Drop explicit initialization of struct i2c_device_id::driver_data to 0
- Improve configuration mode handling in it87 driver
- jc42: Drop support for I2C_CLASS_SPD
- Various conversions to devicetree schema
- Add HAS_IOPORT dependencies as needed
* Minor fixes and improvements to max31790, coretemp, aspeed-g6-pwm-tach,
pwm-fan, pmbus/mp2975, acpi_power_meter, and lm70 drivers
-----BEGIN PGP SIGNATURE-----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=68su
-----END PGP SIGNATURE-----
Merge tag 'hwmon-for-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon updates from Guenter Roeck:
"New drivers:
- Infineon XDP710
- EC Chip driver for Lenovo ThinkStation motherboards
- Analog Devices ADP1050
Improved support for existing drivers:
- emc1403: Convert to with_info API; Support for EMC1428 and EMC1438
- nzxt-kraken3: Support for NZXT Kraken 2023
- aquacomputer_d5next: Support for Octo flow sensors
- pmbus/adm1275: Support for ADM1281
- dell-smm: Supportt for Precision 7540 and G5 5505
Other notable cleanup:
- max6639: Use regmap
- Remove unused structure fields from multiple drivers
- Drop explicit initialization of struct i2c_device_id::driver_data
to zero
- Improve configuration mode handling in it87 driver
- jc42: Drop support for I2C_CLASS_SPD
- Various conversions to devicetree schema
- Add HAS_IOPORT dependencies as needed
Minor fixes and improvements to max31790, coretemp, aspeed-g6-pwm-tach,
pwm-fan, pmbus/mp2975, acpi_power_meter, and lm70 drivers"
* tag 'hwmon-for-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (52 commits)
hwmon: (nzxt-kraken3) Bail out for unsupported device variants
hwmon: (emc1403) Add support for EMC1428 and EMC1438.
hwmon: Drop explicit initialization of struct i2c_device_id::driver_data to 0 (part 2)
hwmon: (emc1403) Add support for conversion interval configuration
hwmon: (emc1403) Support 11 bit accuracy
hwmon: (emc1403) Convert to with_info API
hwmon: (max6639) Use regmap
hwmon: (npcm750-pwm-fan) Remove another unused field in struct npcm7xx_cooling_device
hwmon: (npcm750-pwm-fan) Remove an unused field in struct npcm7xx_cooling_device
hwmon: (stts751) Remove an unused field in struct stts751_priv
hwmon: Drop explicit initialization of struct i2c_device_id::driver_data to 0
hwmon: (max31790) revise the scale to write pwm
hwmon: (nzxt-kraken3) Add support for NZXT Kraken 2023 (standard and Elite) models
hwmon: (nzxt-kraken3) Decouple device names from kinds
hwmon: (it87) Remove tests nolonger required
hwmon: (it87) Test for chipset before entering configuration mode
hwmon: (it87) Do not enter configuration mode for some chiptypes
hwmon: (it87) Rename FEAT_CONF_NOEXIT to FEAT_NOCONF as more descriptive of requirement
hwmon: (pmbus) Add support for Infineon XDP710
dt-bindings: hwmon: Add infineon xdp710 driver bindings
...
There's one API update here, a new API factoring out a common pattern
for reference voltage supplies. These are supplies uses as a reference
by analogue circuits where the consumer requests and enables the supply,
reads the voltage to calibrate the user and then never touches it again.
This is factored out into a single operation which just returns the
voltage and uses devm_ to manage the request and enable portion.
Otherwise this has been a very quiet release, we've got some new device
support, some small fixes, housekeeping and cleanup work but nothing
substantial.
There's also some non-regulator changes in here, a number of users for
the new reference voltage API were merged along with it and some MFD
changes were pulled in as dependencies for new driver work.
Highlights:
- Add a new API for single operation handling of reference voltages.
- Support for Allwinner AXP717 and D1, and NXP PCA9561A.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmZB3mMACgkQJNaLcl1U
h9DRmAf9Etp/ydeKGrbYD4K34Ptk4ZwchkTfvPEiNmJEDBlbcazRoeCF9asUVsDR
ByggQCahCWhEa+exT+IBQYswpwFRd1oZChSgGUmIS/7pvQDdaPL+53Fnw8SfzmdS
QygBEMNN8TGIu2Y+OqEEqINJ407NLbv2SbIlFX1CywZ5hDvCtvFdqhX/xCxTedBN
wXlyj2BLe/xmbTGxr3Ssb+l8a0oe1BZvLO6ddrg8DtS92l1zJ0sEk+fegHSQGPRI
wI4QehjEgphBsoGhybMGz3ny0nvSs3JkpgRiG/ly3cT97Cx6KSGctMtqjmy7Ynh5
TM3Qq5DS37pBKIm79zmQFbL1z2A9Bw==
=wV3x
-----END PGP SIGNATURE-----
Merge tag 'regulator-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator updates from Mark Brown:
"There's one API update here, a new API factoring out a common pattern
for reference voltage supplies. These are supplies used as a reference
by analogue circuits where the consumer requests and enables the
supply, reads the voltage to calibrate the user and then never touches
it again. This is factored out into a single operation which just
returns the voltage and uses devm_ to manage the request and enable
portion.
Otherwise this has been a very quiet release, we've got some new
device support, some small fixes, housekeeping and cleanup work but
nothing substantial.
There's also some non-regulator changes in here, a number of users for
the new reference voltage API were merged along with it and some MFD
changes were pulled in as dependencies for new driver work.
Highlights:
- Add a new API for single operation handling of reference voltages
- Support for Allwinner AXP717 and D1, and NXP PCA9561A"
* tag 'regulator-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (33 commits)
regulator: sun20i: Add Allwinner D1 LDOs driver
regulator: dt-bindings: Add Allwinner D1 system LDOs
regulator: Mention regulator id in error message about dummy supplies
staging: iio: impedance-analyzer: ad5933: Use devm_regulator_get_enable_read_voltage()
iio: frequency: admv1013: Use devm_regulator_get_enable_read_voltage()
iio: addac: ad74115: Use devm_regulator_get_enable_read_voltage()
hwmon: (adc128d818) simplify final return in probe
regulator: devres: fix devm_regulator_get_enable_read_voltage() return
hwmon: (da9052) Use devm_regulator_get_enable_read_voltage()
hwmon: (adc128d818) Use devm_regulator_get_enable_read_voltage()
regulator: devres: add API for reference voltage supplies
regulator: rtq2208: Fix LDO discharge register and add vsel setting
regulator: dt-bindings: fixed-regulator: Add a preferred node name
regulator: axp20x: add support for the AXP717
mfd: axp20x: Add support for AXP717 PMIC
dt-bindings: mfd: x-powers,axp152: Document AXP717
regulator: axp20x: fix typo-ed identifier
dt-bindings: regulator: qcom,usb-vbus-regulator: Add PM7250B compatible
regulator: pca9450: add pca9451a support
regulator: dt-bindings: pca9450: add pca9451a support
...
Dan Carpenter reports:
Commit cbeb479ff4 ("hwmon: (nzxt-kraken3) Decouple device names
from kinds") from Apr 28, 2024 (linux-next), leads to the following
Smatch static checker warning:
drivers/hwmon/nzxt-kraken3.c:957 kraken3_probe()
error: uninitialized symbol 'device_name'.
Indeed, 'device_name' will be uninitizalized if an unknown product is
encountered. In practice this should not matter because the driver
should not instantiate on unknown products, but lets play safe and
bail out if that happens.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/linux-hwmon/b1738c50-db42-40f0-a899-9c027c131ffb@moroto.mountain/
Cc: Jonas Malaco <jonas@protocubo.io>
Cc: Aleksa Savic <savicaleksa83@gmail.com>
Fixes: cbeb479ff4 ("hwmon: (nzxt-kraken3) Decouple device names from kinds")
Acked-by: Jonas Malaco <jonas@protocubo.io>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
EMC1428 and EMC1438 are similar to EMC14xx, but have eight temperature
channels, as well as signed data and limit registers. Chips currently
supported by this driver have unsigned registers only.
Signed-off-by: Lars Petter Mostad <larspm@gmail.com>
Link: https://lore.kernel.org/r/20240510142824.824332-1-lars.petter.mostad@appear.net
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
These drivers don't use the driver_data member of struct i2c_device_id,
so don't explicitly initialize this member.
This prepares putting driver_data in an anonymous union which requires
either no initialization or named designators. But it's also a nice
cleanup on its own.
This is a follow up to commit d8a66f3621 ("hwmon: Drop explicit
initialization of struct i2c_device_id::driver_data to 0") which I
created before identifying a few corner cases in my conversion script.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20240508072027.2119857-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Following the failure observed with a delay of 250us, experiments were
conducted with various delays. It was found that a delay of 350us
effectively mitigated the issue.
To provide a more optimal solution while still allowing a margin for
stability, the delay is being adjusted to 500us.
Signed-off-by: Lakshmi Yadlapati <lakshmiy@us.ibm.com>
Link: https://lore.kernel.org/r/20240507194603.1305750-1-lakshmiy@us.ibm.com
Fixes: 8d655e6523 ("hwmon: (ucd90320) Add minimum delay between bus accesses")
Reviewed-by: Eddie James <eajames@linux.ibm.com>
Cc: stable@vger.kernel.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The chips supported by the emc1403 driver support configurable
conversion rates. Add support for it.
Cc: Lars Petter Mostad <lars.petter.mostad@appear.net>
Tested-by: Lars Petter Mostad <lars.petter.mostad@appear.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Various temperature and limit registers support 11 bit accuracy.
Add support for it.
Cc: Lars Petter Mostad <lars.petter.mostad@appear.net>
Tested-by: Lars Petter Mostad <lars.petter.mostad@appear.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Convert driver to register with the hwmon subsystem using
devm_hwmon_device_register_with_info() instead of
devm_hwmon_device_register_with_groups() to simplify the code
and to reduce its size. As side effect, this also fixes a couple
of overflow problems when writing limit and hysteresis registers.
Cc: Lars Petter Mostad <lars.petter.mostad@appear.net>
Tested-by: Lars Petter Mostad <lars.petter.mostad@appear.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Deduplicate sysfs ->show() callbacks which expose a string at a static
memory location. Use the newly introduced device_show_string() helper
in the driver core instead by declaring those sysfs attributes with
DEVICE_STRING_ATTR_RO().
No functional change intended.
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/23c2031acaa64f1c02f00e817c3f7e4466d17ab2.1713608122.git.lukas@wunner.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Through hidraw, userspace can cause a status report to be sent
from the device. The parsing in ccp_raw_event() may happen in
parallel to a send_usb_cmd() call (which resets the completion
for tracking the report) if it's running on a different CPU where
bottom half interrupts are not disabled.
Add a spinlock around the complete_all() in ccp_raw_event() and
reinit_completion() in send_usb_cmd() to prevent race issues.
Fixes: 40c3a44542 ("hwmon: add Corsair Commander Pro driver")
Signed-off-by: Aleksa Savic <savicaleksa83@gmail.com>
Acked-by: Marius Zachmann <mail@mariuszachmann.de>
Link: https://lore.kernel.org/r/20240504092504.24158-4-savicaleksa83@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
In ccp_raw_event(), the ccp->wait_input_report completion is
completed once. Since we're waiting for exactly one report in
send_usb_cmd(), use complete_all() instead of complete()
to mark the completion as spent.
Fixes: 40c3a44542 ("hwmon: add Corsair Commander Pro driver")
Signed-off-by: Aleksa Savic <savicaleksa83@gmail.com>
Acked-by: Marius Zachmann <mail@mariuszachmann.de>
Link: https://lore.kernel.org/r/20240504092504.24158-3-savicaleksa83@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Introduce cmd_buffer, a separate buffer for storing only
the command that is sent to the device. Before this separation,
the existing buffer was shared for both the command and the
report received in ccp_raw_event(), which was copied into it.
However, because of hidraw, the raw event parsing may be triggered
in the middle of sending a command, resulting in outputting gibberish
to the device. Using a separate buffer resolves this.
Fixes: 40c3a44542 ("hwmon: add Corsair Commander Pro driver")
Signed-off-by: Aleksa Savic <savicaleksa83@gmail.com>
Acked-by: Marius Zachmann <mail@mariuszachmann.de>
Link: https://lore.kernel.org/r/20240504092504.24158-2-savicaleksa83@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
We can reduce boilerplate code and eliminate the driver remove()
function by using devm_regulator_get_enable_read_voltage().
A new external_vref flag is added since we no longer have the handle
to the regulator to check if it is present.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: David Lechner <dlechner@baylibre.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20240429-regulator-get-enable-get-votlage-v2-2-b1f11ab766c1@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
These drivers don't use the driver_data member of struct i2c_device_id,
so don't explicitly initialize this member.
This prepares putting driver_data in an anonymous union which requires
either no initialization or named designators. But it's also a nice
cleanup on its own.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20240430085654.1028864-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Since the value for PWMOUT Target Duty Cycle register is a 9 bit
left-justified value that ranges from 0 to 511 and is contained in 2
bytes.
There is an issue that the PWM signal recorded by oscilloscope would
not be on consistently if we set PWM to 100% to the driver.
It is because the LSB of the 9 bit would always be zero if it just
left shift 8 bit for the value that write to PWMOUT Target Duty
Cycle register.
Therefore, revise the scale of the value that was written to pwm input
from 255 to 511 and modify the value to left-justified value.
Signed-off-by: Delphine CC Chiu <Delphine_CC_Chiu@wiwynn.com>
Link: https://lore.kernel.org/r/20240416022211.859483-1-Delphine_CC_Chiu@wiwynn.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Add support for NZXT Kraken 2023 (standard) and NZXT Kraken 2023 Elite
all-in-one CPU coolers. These models communicate identically to the NZXT
Kraken Z-series (Z53 code paths) in all cases except when writing the
fan curve, where setting additional bits in the report is needed.
Reviewed-by: Jonas Malaco <jonas@protocubo.io>
Signed-off-by: Aleksa Savic <savicaleksa83@gmail.com>
Link: https://lore.kernel.org/r/20240428104812.14037-3-savicaleksa83@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Prepare for the support of new models, for which the relationship
between device name (for hwmon and debugfs) and kind (for the selection
of appropriate code paths within this driver) will no longer be 1:1.
Originally-from: Jonas Malaco <jonas@protocubo.io>
Signed-off-by: Aleksa Savic <savicaleksa83@gmail.com>
Link: https://lore.kernel.org/r/20240428104812.14037-2-savicaleksa83@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Remove DMI tests for boards that are known to have issues with entering
configuration mode, as now we are testing the chips directly and no
longer need to rely on matching the board.
Leave the DMI table in place, for the nVIDIA board, and any future
expansions.
Signed-off-by: Frank Crawford <frank@crawford.emu.id.au>
Link: https://lore.kernel.org/r/20240428060653.2425296-5-frank@crawford.emu.id.au
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Major part of the change for the new method to avoid chipset issues.
The actual update does the following:
1) Lock the memory, but does not perform a SIO entry (previously it
would have performed an SIO entry).
2) Attempt to read the chipID. This should be safe no matter which
chip we have.
3) If step (2) fails, then perform SIO entry and retry chipID read. For
older chips and on failure it acts similarly to prior to this patch.
4) Set the sio_data->type, similar to previously.
5) If we have not performed an SIO entry, and this is not a chip type
with the NOCONF feature, then it will perform an SIO entry at this
point.
6) Proceed with setup as prior to this patch.
7) Any following access to the SIO registers will invoke the SIO entry
and SIO exit steps unless it is a chip with the NOCONF feature set.
This was set up in the previous patches in this patchset.
8) Update to the exit based on if it had performed a SIO entry or not.
Signed-off-by: Frank Crawford <frank@crawford.emu.id.au>
Link: https://lore.kernel.org/r/20240428060653.2425296-4-frank@crawford.emu.id.au
[groeck: s/intialised/initialized/]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Rename previous definitions to match the new information that they are
preinitialised as enabled and should not receive codes to enter or exit
configuration mode.
Signed-off-by: Frank Crawford <frank@crawford.emu.id.au>
Link: https://lore.kernel.org/r/20240428060653.2425296-2-frank@crawford.emu.id.au
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Add support for Infineon XDP710.This is a Hot-Swap Controller.
Signed-off-by: Peter Yin <peteryin.openbmc@gmail.com>
Link: https://lore.kernel.org/r/20240425153608.4003782-2-peteryin.openbmc@gmail.com
[groeck: s/microOhmRsense/micro_ohm_osense/g; declared array static]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
This addition adds in the ability for the system to scan
the EC chip in the Lenovo ThinkStation systems to get the
current fan RPM speeds the Maximum speed value for each
fan also provides the CPU, DIMM other thermal statuses
Signed-off-by: David Ober <dober6023@gmail.com>
Link: https://lore.kernel.org/r/20240328121250.331146-1-dober6023@gmail.com
[groeck: Dropped pointless case statements]
[Colin King: Fixed spelling error accesssible -> accessible]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The Intel Software Development manual defines the temperature digital
readout as the bits [22:16] of the IA32_[PACKAGE]_THERM_STATUS registers.
Bit 23 is specified as reserved.
In recent processors, however, the temperature digital readout uses bits
[23:16]. In those processors, using the bitmask 0x7f would lead to
incorrect readings if the temperature deviates from TjMax by more than
127 degrees Celsius.
Although not guaranteed, bit 23 is likely to be 0 in processors from a few
generations ago. The temperature reading would still be correct in those
processors when using a 0xff bitmask.
Model-specific provisions can be made for older processors in which bit 23
is not 0 should the need arise.
Signed-off-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com>
Link: https://lore.kernel.org/r/20240425171311.19519-4-ricardo.neri-calderon@linux.intel.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Last host driver supporting I2C_CLASS_SPD was i801. Now that I2C_CLASS_SPD
support has been removed there, we can remove it here too.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/3c4a1715-bfbb-4ae2-b35f-2f20f95e4932@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Link: https://lore.kernel.org/r/20240409085552.19868-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Convert the module to be property provider agnostic and allow
it to be used on non-OF platforms.
Add mod_devicetable.h include.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20240404191323.3547465-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
This is a preparatory change to fulfill further conversion
the driver to be OF-independent. The independent code has
no analogue API that can read the value by index in the device
property array.
Suggested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240404191323.3547465-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
In a future patch HAS_IOPORT=n will disable inb()/outb() and friends at
compile time. We thus need to add HAS_IOPORT as dependency for those
drivers using them.
Acked-by: Guenter Roeck <linux@roeck-us.net>
Co-developed-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Link: https://lore.kernel.org/r/20240404124700.3807842-2-schnelle@linux.ibm.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Use preferred i2c_get_match_data() instead of of_device_get_match_data()
to get the driver match data. With this, adjust the includes to explicitly
include the correct headers.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240325120952.3019767-4-andriy.shevchenko@linux.intel.com
[groeck: Dropped __maybe_unused from mp2975_of_match]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Constify the local variables pointing to "struct pmbus_driver_info" and
other encoding params to annotate the function is not modifying pointed
data.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240325120952.3019767-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The newly introduced SWAP() macro is quite generic by naming, but
moreover it's a repetition of the existing __assign_bit().
With this applied, add a missing bits.h (via now required bitops.h).
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240325120952.3019767-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Add support for ADP1050 Digital Controller for Isolated Power Supplies
with PMBus interface Voltage, Current and Temperature Monitor.
The ADP1050 implements several features to enable a robust
system of parallel and redundant operation for customers who
require high availability. The device can measure voltage,
current and temperature that can be used in different
techniques to identify and safely shut down an erroneous
power supply in parallel operation mode.
Signed-off-by: Radu Sabau <radu.sabau@analog.com>
Link: https://lore.kernel.org/r/20240321142201.10330-2-radu.sabau@analog.com
[groeck: Fixed corrupted link in documentation]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The following error can be observed at boot:
[ 3.717920] ACPI Error: No handler for Region [SYSI] (00000000ab9e62c5) [IPMI] (20230628/evregion-130)
[ 3.717928] ACPI Error: Region IPMI (ID=7) has no handler (20230628/exfldio-261)
[ 3.717936] No Local Variables are initialized for Method [_GHL]
[ 3.717938] No Arguments are initialized for method [_GHL]
[ 3.717940] ACPI Error: Aborting method \_SB.PMI0._GHL due to previous error (AE_NOT_EXIST) (20230628/psparse-529)
[ 3.717949] ACPI Error: Aborting method \_SB.PMI0._PMC due to previous error (AE_NOT_EXIST) (20230628/psparse-529)
[ 3.717957] ACPI: \_SB_.PMI0: _PMC evaluation failed: AE_NOT_EXIST
On Dell systems several methods of acpi_power_meter access variables in
IPMI region [0], so wait until IPMI space handler is installed by
acpi_ipmi and also wait until SMI is selected to make the space handler
fully functional.
Since the dependency is inside BIOS's ASL code and it's not
discoverable, so use this fixup is a hack to workaround BIOS issue.
[0] https://www.dell.com/support/manuals/en-us/redhat-enterprise-linux-v8.0/rhel8_rn_pub/advanced-configuration-and-power-interface-acpi-error-messages-displayed-in-dmesg?guid=guid-0d5ae482-1977-42cf-b417-3ed5c3f5ee62
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Link: https://lore.kernel.org/r/20240320084317.366853-2-kai.heng.feng@canonical.com
[groeck: Simplified added code]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Update links in the documentation and in-code comments which point to
the datasheet.
The current links don't work because National Semiconductor (which is the
original manufacturer of this chip) has been a part of Texas Instruments
since 2011 and http://www.national.com/ doesn't work anymore.
Fixes: e1a8e913f9 ("[PATCH] lm70: New hardware monitoring driver")
Signed-off-by: Kousik Sanagavarapu <five231003@gmail.com>
Link: https://lore.kernel.org/r/20240318154540.90613-3-five231003@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The MP2971/MP2973 use a custom 16bit register format for
SMBALERT_MASK which doesn't follow the PMBUS specification.
Map the PMBUS defined bits used by the common code onto the custom
format used by MPS and since the SMBALERT_MASK is currently never read
by common code only implement the mapping for write transactions.
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Signed-off-by: Naresh Solanki <naresh.solanki@9elements.com>
Link: https://lore.kernel.org/r/20240318174406.3782306-1-naresh.solanki@9elements.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
heap optimizations".
- Kuan-Wei Chiu has also sped up the library sorting code in the series
"lib/sort: Optimize the number of swaps and comparisons".
- Alexey Gladkov has added the ability for code running within an IPC
namespace to alter its IPC and MQ limits. The series is "Allow to
change ipc/mq sysctls inside ipc namespace".
- Geert Uytterhoeven has contributed some dhrystone maintenance work in
the series "lib: dhry: miscellaneous cleanups".
- Ryusuke Konishi continues nilfs2 maintenance work in the series
"nilfs2: eliminate kmap and kmap_atomic calls"
"nilfs2: fix kernel bug at submit_bh_wbc()"
- Nathan Chancellor has updated our build tools requirements in the
series "Bump the minimum supported version of LLVM to 13.0.1".
- Muhammad Usama Anjum continues with the selftests maintenance work in
the series "selftests/mm: Improve run_vmtests.sh".
- Oleg Nesterov has done some maintenance work against the signal code
in the series "get_signal: minor cleanups and fix".
Plus the usual shower of singleton patches in various parts of the tree.
Please see the individual changelogs for details.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZfMnvgAKCRDdBJ7gKXxA
jjKMAP4/Upq07D4wjkMVPb+QrkipbbLpdcgJ++q3z6rba4zhPQD+M3SFriIJk/Xh
tKVmvihFxfAhdDthseXcIf1nBjMALwY=
=8rVc
-----END PGP SIGNATURE-----
Merge tag 'mm-nonmm-stable-2024-03-14-09-36' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
- Kuan-Wei Chiu has developed the well-named series "lib min_heap: Min
heap optimizations".
- Kuan-Wei Chiu has also sped up the library sorting code in the series
"lib/sort: Optimize the number of swaps and comparisons".
- Alexey Gladkov has added the ability for code running within an IPC
namespace to alter its IPC and MQ limits. The series is "Allow to
change ipc/mq sysctls inside ipc namespace".
- Geert Uytterhoeven has contributed some dhrystone maintenance work in
the series "lib: dhry: miscellaneous cleanups".
- Ryusuke Konishi continues nilfs2 maintenance work in the series
"nilfs2: eliminate kmap and kmap_atomic calls"
"nilfs2: fix kernel bug at submit_bh_wbc()"
- Nathan Chancellor has updated our build tools requirements in the
series "Bump the minimum supported version of LLVM to 13.0.1".
- Muhammad Usama Anjum continues with the selftests maintenance work in
the series "selftests/mm: Improve run_vmtests.sh".
- Oleg Nesterov has done some maintenance work against the signal code
in the series "get_signal: minor cleanups and fix".
Plus the usual shower of singleton patches in various parts of the tree.
Please see the individual changelogs for details.
* tag 'mm-nonmm-stable-2024-03-14-09-36' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (77 commits)
nilfs2: prevent kernel bug at submit_bh_wbc()
nilfs2: fix failure to detect DAT corruption in btree and direct mappings
ocfs2: enable ocfs2_listxattr for special files
ocfs2: remove SLAB_MEM_SPREAD flag usage
assoc_array: fix the return value in assoc_array_insert_mid_shortcut()
buildid: use kmap_local_page()
watchdog/core: remove sysctl handlers from public header
nilfs2: use div64_ul() instead of do_div()
mul_u64_u64_div_u64: increase precision by conditionally swapping a and b
kexec: copy only happens before uchunk goes to zero
get_signal: don't initialize ksig->info if SIGNAL_GROUP_EXIT/group_exec_task
get_signal: hide_si_addr_tag_bits: fix the usage of uninitialized ksig
get_signal: don't abuse ksig->info.si_signo and ksig->sig
const_structs.checkpatch: add device_type
Normalise "name (ad@dr)" MODULE_AUTHORs to "name <ad@dr>"
dyndbg: replace kstrdup() + strchr() with kstrdup_and_replace()
list: leverage list_is_head() for list_entry_is_head()
nilfs2: MAINTAINERS: drop unreachable project mirror site
smp: make __smp_processor_id() 0-argument macro
fat: fix uninitialized field in nostale filehandles
...
Highlights:
- acer-wmi: New HW support
- amd/pmf: Support for new revision of heartbeat notify
- asus-wmi: Correctly handle HW without LEDs
- fujitsu-laptop: Battery charge control support
- hp-wmi: Support for new thermal profiles
- ideapad-laptop: Support for refresh rate key
- intel/pmc: Put AI accelerator (GNA) into D3 if it has no
driver to allow entry into low-power modes, and
temporarily removed Lunar Lake SSRAM support due
to breaking FW changes causing probe fail
(further breaking FW changes are still pending)
- pmc/punit_atom: Report devices that prevent reacing low power
levels
- surface: Fan speed function support
- thinkpad_acpi: Support for more sperial keys and complete the
list of models with non-standard fan registers
- touchscreen_dmi: New HW support
- wmi: Continued modernization efforts
- Removal of obsoleted ledtrig-audio call and the related dependency
- Debug & metrics interface improvements
- Miscellaneous cleanups / fixes / improvements
The following is an automated shortlog grouped by driver:
acer-wmi:
- Add predator_v4 module parameter
- Add support for Acer PH16-71
amd/hsmp:
- Add support for ACPI based probing
- Cache pci_dev in struct hsmp_socket
- Change devm_kzalloc() to devm_kcalloc()
- Check num_sockets against MAX_AMD_SOCKETS
- Create static func to handle platdev
- Define a struct to hold mailbox regs
- Move dev from platdev to hsmp_socket
- Move hsmp_test to probe
- Non-ACPI support for AMD F1A_M00~0Fh
- Remove extra parenthesis and add a space
- Restructure sysfs group creation
amd/pmf:
- Add missing __iomem attribute to policy_base
- Add support to get APTS index numbers for static slider
- Add support to get sbios requests in PMF driver
- Add support to get sps default APTS index values
- Add support to notify sbios heart beat event
- Differentiate PMF ACPI versions
- Disable debugfs support for querying power thermals
- Do not use readl() for policy buffer access
- Fix possible out-of-bound memory accesses
- Fix return value of amd_pmf_start_policy_engine()
- Update sps power thermals according to the platform-profiles
- Use struct for cookie header
asus-wmi:
- Consider device is absent when the read is ~0
- Revert: Support WMI event queue
clk: x86:
- Move clk-pmc-atom register defines to include/linux/platform_data/x86/pmc_atom.h
dell-privacy:
- Remove usage of wmi_has_guid()
Documentation/x86/amd/hsmp:
- Updating urls
drivers/mellanox:
- Convert snprintf to sysfs_emit
fujitsu-laptop:
- Add battery charge control support
hp-wmi:
- Add thermal profile support for 8BAD boards
- Tidy up module source code
ideapad-laptop:
- map Fn + R key to KEY_REFRESH_RATE_TOGGLE
- support Fn+R dual-function key
Input:
- allocate keycode for Display refresh rate toggle
intel/ifs:
- Add an entry rendezvous for SAF
- Add current batch number to trace output
- Remove unnecessary initialization of 'ret'
- Replace the exit rendezvous with an entry rendezvous for ARRAY_BIST
- Trace on all HT threads when executing a test
intel/pmc/arl:
- Put GNA device in D3
intel/pmc:
- Improve PKGC residency counters debug
intel/pmc/lnl:
- Remove SSRAM support
intel_scu_ipcutil:
- Make scu static
intel_scu_pcidrv:
- Remove unused intel-mid.h
intel_scu_wdt:
- Remove unused intel-mid.h
intel/tpmi:
- Change vsec offset to u64
intel/vsec:
- Remove nuisance message
ISST:
- Allow reading core-power state on HWP disabled systems
mlxbf-pmc:
- Cleanup signed/unsigned mix-up
- fix signedness bugs
- Ignore unsupported performance blocks
mlxbf-pmc: mlxbf_pmc_event_list():
- make size ptr optional
mlxbf-pmc:
- Replace uintN_t with kernel-style types
mlxreg-hotplug:
- Remove redundant NULL-check
pmc_atom:
- Annotate d3_sts register bit defines
- Check state of PMC clocks on s2idle
- Check state of PMC managed devices on s2idle
silicom-platform:
- clean up a check
surface: aggregator_registry:
- add entry for fan speed
thinkpad_acpi:
- Add more ThinkPads with non-standard reg address for fan
- Fix to correct wrong temp reporting on some ThinkPads
- remove redundant assignment to variable i
- Simplify thermal mode checking
- Support for mode FN key
touchscreen_dmi:
- Add an extra entry for a variant of the Chuwi Vi8 tablet
wmi:
- Always evaluate _WED when receiving an event
- Check if event data is not NULL
- Check if WMxx control method exists
- Do not instantiate older WMI drivers multiple times
- Ignore duplicated GUIDs in legacy matches
- Make input buffer mandatory when evaluating methods
- Prevent incompatible event driver from probing
- Remove obsolete duplicate GUID allowlist
- Remove unnecessary out-of-memory message
- Replace pr_err() with dev_err()
- Stop using ACPI device class
- Update documentation regarding _WED
- Use ACPI device name in netlink event
- Use FW_BUG when warning about missing control methods
x86/atom:
- Check state of Punit managed devices on s2idle
x86: ibm_rtl:
- make rtl_subsys const
x86: wmi:
- make wmi_bus_type const
platform/x86:
- make fw_attr_class constant
- remove obsolete calls to ledtrig_audio_get
Merges:
- Merge tag 'platform-drivers-x86-v6.8-2' into pdx/for-next
- Merge tag 'platform-drivers-x86-v6.8-4' into pdx86/for-next
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSCSUwRdwTNL2MhaBlZrE9hU+XOMQUCZfLZKgAKCRBZrE9hU+XO
MWqnAQCZW0KiSzXbJkTN4GWlMOqnlaJsiflnPeVNxH59bDUTeQEA/OdSzyiDUqKr
zJcGnOyILuQ3wCvQ5SuqRCwjFHXOQg0=
=8y6r
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v6.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver updates from Ilpo Järvinen:
- New acer-wmi HW support
- Support for new revision of amd/pmf heartbeat notify
- Correctly handle asus-wmi HW without LEDs
- fujitsu-laptop battery charge control support
- Support for new hp-wmi thermal profiles
- Support ideapad-laptop refresh rate key
- Put intel/pmc AI accelerator (GNA) into D3 if it has no driver to
allow entry into low-power modes, and temporarily removed Lunar Lake
SSRAM support due to breaking FW changes causing probe fail (further
breaking FW changes are still pending)
- Report pmc/punit_atom devices that prevent reacing low power levels
- Surface Fan speed function support
- Support for more sperial keys and complete the list of models with
non-standard fan registers in thinkpad_acpi
- New DMI touchscreen HW support
- Continued modernization efforts of wmi
- Removal of obsoleted ledtrig-audio call and the related dependency
- Debug & metrics interface improvements
- Miscellaneous cleanups / fixes / improvements
* tag 'platform-drivers-x86-v6.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (87 commits)
platform/x86/intel/pmc: Improve PKGC residency counters debug
platform/x86: asus-wmi: Consider device is absent when the read is ~0
Documentation/x86/amd/hsmp: Updating urls
platform/mellanox: mlxreg-hotplug: Remove redundant NULL-check
platform/x86/amd/pmf: Update sps power thermals according to the platform-profiles
platform/x86/amd/pmf: Add support to get sps default APTS index values
platform/x86/amd/pmf: Add support to get APTS index numbers for static slider
platform/x86/amd/pmf: Add support to notify sbios heart beat event
platform/x86/amd/pmf: Add support to get sbios requests in PMF driver
platform/x86/amd/pmf: Disable debugfs support for querying power thermals
platform/x86/amd/pmf: Differentiate PMF ACPI versions
x86/platform/atom: Check state of Punit managed devices on s2idle
platform/x86: pmc_atom: Check state of PMC clocks on s2idle
platform/x86: pmc_atom: Check state of PMC managed devices on s2idle
platform/x86: pmc_atom: Annotate d3_sts register bit defines
clk: x86: Move clk-pmc-atom register defines to include/linux/platform_data/x86/pmc_atom.h
platform/x86: make fw_attr_class constant
platform/x86/intel/tpmi: Change vsec offset to u64
platform/x86: intel_scu_pcidrv: Remove unused intel-mid.h
platform/x86: intel_scu_wdt: Remove unused intel-mid.h
...
* New drivers for
- Amphenol ChipCap 2
- ASPEED g6 PWM/Fan tach
- Astera Labs PT5161L retimer
- ASUS ROG RYUJIN II 360 AIO cooler
- LTC4282
- Microsoft Surface devices
- MPS MPQ8785 Synchronous Step-Down Converter
- NZXT Kraken X and Z series AIO CPU coolers
* Additional chip support in existing drivers
- Ayaneo Air Plus 7320u (oxp-sensors)
- INA260 (ina2xx)
- XPS 9315 (dell-smm)
- MSI customer ID (nct6683)
* Devicetree bindings updates
- Common schema for hardware monitoring devices
- Common schema for fans
- Update chip descriptions to use common schema
- Document regulator properties in several drivers
- Explicit bindings for infineon buck converters
* Other improvements
- Replaced rbtree with maple tree register cache in several drivers
- Added support for humidity min/max alarm and volatage fault attributes
to hwmon core
- Dropped non-functional I2C_CLASS_HWMON support for drivers w/o detect()
- Dropped obsolete and redundant entried from MAINTAINERS
- Cleaned up axi-fan-control and coretemp drivers
- Minor fixes and improvements in several other drivers
-----BEGIN PGP SIGNATURE-----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=BTB3
-----END PGP SIGNATURE-----
Merge tag 'hwmon-for-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon updates from Guenter Roeck:
"New drivers:
- Amphenol ChipCap 2
- ASPEED g6 PWM/Fan tach
- Astera Labs PT5161L retimer
- ASUS ROG RYUJIN II 360 AIO cooler
- LTC4282
- Microsoft Surface devices
- MPS MPQ8785 Synchronous Step-Down Converter
- NZXT Kraken X and Z series AIO CPU coolers
Additional chip support in existing drivers:
- Ayaneo Air Plus 7320u (oxp-sensors)
- INA260 (ina2xx)
- XPS 9315 (dell-smm)
- MSI customer ID (nct6683)
Devicetree bindings updates:
- Common schema for hardware monitoring devices
- Common schema for fans
- Update chip descriptions to use common schema
- Document regulator properties in several drivers
- Explicit bindings for infineon buck converters
Other improvements:
- Replaced rbtree with maple tree register cache in several drivers
- Added support for humidity min/max alarm and volatage fault
attributes to hwmon core
- Dropped non-functional I2C_CLASS_HWMON support for drivers w/o
detect()
- Dropped obsolete and redundant entried from MAINTAINERS
- Cleaned up axi-fan-control and coretemp drivers
- Minor fixes and improvements in several other drivers"
* tag 'hwmon-for-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (70 commits)
hwmon: (dell-smm) Add XPS 9315 to fan control whitelist
hwmon: (aspeed-g6-pwm-tacho): Support for ASPEED g6 PWM/Fan tach
dt-bindings: hwmon: Support Aspeed g6 PWM TACH Control
dt-bindings: hwmon: fan: Add fan binding to schema
dt-bindings: hwmon: tda38640: Add interrupt & regulator properties
hwmon: (amc6821) add of_match table
dt-bindings: hwmon: lm75: use common hwmon schema
hwmon: (sis5595) drop unused DIV_TO_REG function
dt-bindings: hwmon: reference common hwmon schema
dt-bindings: hwmon: lltc,ltc4286: use common hwmon schema
dt-bindings: hwmon: adi,adm1275: use common hwmon schema
dt-bindings: hwmon: ti,ina2xx: use common hwmon schema
dt-bindings: hwmon: add common properties
hwmon: (pmbus/ir38064) Use PMBUS_REGULATOR_ONE to declare regulator
hwmon: (pmbus/lm25066) Use PMBUS_REGULATOR_ONE to declare regulator
hwmon: (pmbus/tda38640) Use PMBUS_REGULATOR_ONE to declare regulator
regulator: dt-bindings: promote infineon buck converters to their own binding
dt-bindings: hwmon/pmbus: ti,lm25066: document regulators
dt-bindings: hwmon: nuvoton,nct6775: Add compatible value for NCT6799
MAINTAINERS: Drop redundant hwmon entries
...
Many older WMI drivers cannot be instantiated multiple times for
two reasons:
- they are using the legacy GUID-based WMI API
- they are singletons (with global state)
Prevent such WMI drivers from binding to WMI devices with a duplicated
GUID, as this would mean that the WMI driver will be instantiated at
least two times (one for the original GUID and one for the duplicated
GUID).
WMI drivers which can be instantiated multiple times can signal this
by setting a flag inside struct wmi_driver.
Tested on a ASUS Prime B650-Plus.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20240226193557.2888-2-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The current implementation has a couple of shortcomings:
- It fails to handle hybrid systems correctly.
- The APIC registration code which handles CPU number assignents is in
the middle of the APIC code and detached from the topology evaluation.
- The various mechanisms which enumerate APICs, ACPI, MPPARSE and guest
specific ones, tweak global variables as they see fit or in case of
XENPV just hack around the generic mechanisms completely.
- The CPUID topology evaluation code is sprinkled all over the vendor
code and reevaluates global variables on every hotplug operation.
- There is no way to analyze topology on the boot CPU before bringing up
the APs. This causes problems for infrastructure like PERF which needs
to size certain aspects upfront or could be simplified if that would be
possible.
- The APIC admission and CPU number association logic is incomprehensible
and overly complex and needs to be kept around after boot instead of
completing this right after the APIC enumeration.
This update addresses these shortcomings with the following changes:
- Rework the CPUID evaluation code so it is common for all vendors and
provides information about the APIC ID segments in a uniform way
independent of the number of segments (Thread, Core, Module, ..., Die,
Package) so that this information can be computed instead of rewriting
global variables of dubious value over and over.
- A few cleanups and simplifcations of the APIC, IO/APIC and related
interfaces to prepare for the topology evaluation changes.
- Seperation of the parser stages so the early evaluation which tries to
find the APIC address can be seperately overridden from the late
evaluation which enumerates and registers the local APIC as further
preparation for sanitizing the topology evaluation.
- A new registration and admission logic which
- encapsulates the inner workings so that parsers and guest logic
cannot longer fiddle in it
- uses the APIC ID segments to build topology bitmaps at registration
time
- provides a sane admission logic
- allows to detect the crash kernel case, where CPU0 does not run on
the real BSP, automatically. This is required to prevent sending
INIT/SIPI sequences to the real BSP which would reset the whole
machine. This was so far handled by a tedious command line
parameter, which does not even work in nested crash scenarios.
- Associates CPU number after the enumeration completed and prevents
the late registration of APICs, which was somehow tolerated before.
- Converting all parsers and guest enumeration mechanisms over to the
new interfaces.
This allows to get rid of all global variable tweaking from the parsers
and enumeration mechanisms and sanitizes the XEN[PV] handling so it can
use CPUID evaluation for the first time.
- Mopping up existing sins by taking the information from the APIC ID
segment bitmaps.
This evaluates hybrid systems correctly on the boot CPU and allows for
cleanups and fixes in the related drivers, e.g. PERF.
The series has been extensively tested and the minimal late fallout due to
a broken ACPI/MADT table has been addressed by tightening the admission
logic further.
-----BEGIN PGP SIGNATURE-----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=/5oR
-----END PGP SIGNATURE-----
Merge tag 'x86-apic-2024-03-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 APIC updates from Thomas Gleixner:
"Rework of APIC enumeration and topology evaluation.
The current implementation has a couple of shortcomings:
- It fails to handle hybrid systems correctly.
- The APIC registration code which handles CPU number assignents is
in the middle of the APIC code and detached from the topology
evaluation.
- The various mechanisms which enumerate APICs, ACPI, MPPARSE and
guest specific ones, tweak global variables as they see fit or in
case of XENPV just hack around the generic mechanisms completely.
- The CPUID topology evaluation code is sprinkled all over the vendor
code and reevaluates global variables on every hotplug operation.
- There is no way to analyze topology on the boot CPU before bringing
up the APs. This causes problems for infrastructure like PERF which
needs to size certain aspects upfront or could be simplified if
that would be possible.
- The APIC admission and CPU number association logic is
incomprehensible and overly complex and needs to be kept around
after boot instead of completing this right after the APIC
enumeration.
This update addresses these shortcomings with the following changes:
- Rework the CPUID evaluation code so it is common for all vendors
and provides information about the APIC ID segments in a uniform
way independent of the number of segments (Thread, Core, Module,
..., Die, Package) so that this information can be computed instead
of rewriting global variables of dubious value over and over.
- A few cleanups and simplifcations of the APIC, IO/APIC and related
interfaces to prepare for the topology evaluation changes.
- Seperation of the parser stages so the early evaluation which tries
to find the APIC address can be seperately overridden from the late
evaluation which enumerates and registers the local APIC as further
preparation for sanitizing the topology evaluation.
- A new registration and admission logic which
- encapsulates the inner workings so that parsers and guest logic
cannot longer fiddle in it
- uses the APIC ID segments to build topology bitmaps at
registration time
- provides a sane admission logic
- allows to detect the crash kernel case, where CPU0 does not run
on the real BSP, automatically. This is required to prevent
sending INIT/SIPI sequences to the real BSP which would reset
the whole machine. This was so far handled by a tedious command
line parameter, which does not even work in nested crash
scenarios.
- Associates CPU number after the enumeration completed and
prevents the late registration of APICs, which was somehow
tolerated before.
- Converting all parsers and guest enumeration mechanisms over to the
new interfaces.
This allows to get rid of all global variable tweaking from the
parsers and enumeration mechanisms and sanitizes the XEN[PV]
handling so it can use CPUID evaluation for the first time.
- Mopping up existing sins by taking the information from the APIC ID
segment bitmaps.
This evaluates hybrid systems correctly on the boot CPU and allows
for cleanups and fixes in the related drivers, e.g. PERF.
The series has been extensively tested and the minimal late fallout
due to a broken ACPI/MADT table has been addressed by tightening the
admission logic further"
* tag 'x86-apic-2024-03-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (76 commits)
x86/topology: Ignore non-present APIC IDs in a present package
x86/apic: Build the x86 topology enumeration functions on UP APIC builds too
smp: Provide 'setup_max_cpus' definition on UP too
smp: Avoid 'setup_max_cpus' namespace collision/shadowing
x86/bugs: Use fixed addressing for VERW operand
x86/cpu/topology: Get rid of cpuinfo::x86_max_cores
x86/cpu/topology: Provide __num_[cores|threads]_per_package
x86/cpu/topology: Rename topology_max_die_per_package()
x86/cpu/topology: Rename smp_num_siblings
x86/cpu/topology: Retrieve cores per package from topology bitmaps
x86/cpu/topology: Use topology logical mapping mechanism
x86/cpu/topology: Provide logical pkg/die mapping
x86/cpu/topology: Simplify cpu_mark_primary_thread()
x86/cpu/topology: Mop up primary thread mask handling
x86/cpu/topology: Use topology bitmaps for sizing
x86/cpu/topology: Let XEN/PV use topology from CPUID/MADT
x86/xen/smp_pv: Count number of vCPUs early
x86/cpu/topology: Assign hotpluggable CPUIDs during init
x86/cpu/topology: Reject unknown APIC IDs on ACPI hotplug
x86/topology: Add a mechanism to track topology via APIC IDs
...
A user reported that on this machine, disabling BIOS fan control
is necessary in order to change the fan speed.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Acked-by: Pali Rohár <pali@kernel.org>
Link: https://lore.kernel.org/r/20240309212025.13758-1-W_Armin@gmx.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The driver support two functions: PWM and Tachometer. The PWM feature can
handle up to 16 output ports, while the Tachometer can monitor to up to 16
input ports as well. This driver implements them by exposing two kernel
subsystems: PWM and HWMON. The PWM subsystem can be utilized alongside
existing drivers for controlling elements such as fans (pwm-fan.c),
beepers (pwm-beeper.c) and so on. Through the HWMON subsystem, the driver
provides sysfs interfaces for fan.
Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com>
Link: https://lore.kernel.org/r/20240221104025.1306227-4-billy_tsai@aspeedtech.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Add of_match table for "ti,amc6821" compatible string.
This fixes automatic driver loading by userspace when using device-tree,
and if built as a module like major linux distributions do.
While devices probe just fine with i2c_device_id table, userspace can't
match the "ti,amc6821" compatible string from dt with the plain
"amc6821" device id. As a result, the kernel module can not be loaded.
Cc: stable@vger.kernel.org
Signed-off-by: Josua Mayer <josua@solid-run.com>
Link: https://lore.kernel.org/r/20240307-amc6821-of-match-v1-1-5f40464a3110@solid-run.com
[groeck: Cleaned up patch description]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Found with git grep 'MODULE_AUTHOR(".*([^)]*@'
Fixed with
sed -i '/MODULE_AUTHOR(".*([^)]*@/{s/ (/ </g;s/)"/>"/;s/)and/> and/}' \
$(git grep -l 'MODULE_AUTHOR(".*([^)]*@')
Also:
in drivers/media/usb/siano/smsusb.c normalise ", INC" to ", Inc";
this is what every other MODULE_AUTHOR for this company says,
and it's what the header says
in drivers/sbus/char/openprom.c normalise a double-spaced separator;
this is clearly copied from the copyright header,
where the names are aligned on consecutive lines thusly:
* Linux/SPARC PROM Configuration Driver
* Copyright (C) 1996 Thomas K. Dyas (tdyas@noc.rutgers.edu)
* Copyright (C) 1996 Eddie C. Dost (ecd@skynet.be)
but the authorship branding is single-line
Link: https://lkml.kernel.org/r/mk3geln4azm5binjjlfsgjepow4o73domjv6ajybws3tz22vb3@tarta.nabijaczleweli.xyz
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
'DIV_TO_REG' function is not used:
sis5595.c:159:18: error: unused function 'DIV_TO_REG' [-Werror,-Wunused-function]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240225202841.60740-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
If a chip only provides a single regulator, it should be named 'vout'
and not 'vout0'. Declare regulator using PMBUS_REGULATOR_ONE() to make
that happen.
Cc: Conor Dooley <conor@kernel.org>
Cc: Naresh Solanki <naresh.solanki@9elements.com>
Cc: Patrick Rudolph <patrick.rudolph@9elements.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240223-harmless-covenant-9cd3d4f1cfd2@spud
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
If a chip only provides a single regulator, it should be named 'vout'
and not 'vout0'. Declare regulator using PMBUS_REGULATOR_ONE() to make
that happen.
Cc: Conor Dooley <conor@kernel.org>
Cc: Naresh Solanki <naresh.solanki@9elements.com>
Cc: Zev Weiss <zev@bewilderbeest.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240223-player-buckskin-01405c5889c4@spud
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
If a chip only provides a single regulator, it should be named 'vout'
and not 'vout0'. Declare regulator using PMBUS_REGULATOR_ONE() to make
that happen.
Cc: Conor Dooley <conor@kernel.org>
Cc: Naresh Solanki <naresh.solanki@9elements.com>
Cc: Patrick Rudolph <patrick.rudolph@9elements.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240223-catnap-companion-c42fdd8ad110@spud
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Don't directly use OF and use device property APIs. In addition, this
makes the probe() code neater and also allow us to move the
of_device_id table to it's natural place.
While at it, make sure to explicitly include mod_devicetable.h for the
of_device_id table.
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20240214-axi-fan-control-no-of-v1-1-43ca656fe2e3@analog.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Add support for handheld AYANEO AIR Plus with the same EC registers
to add proper fan control.
Functionality was tested successfully.
Signed-off-by: Sebastian Kranz <tklightforce@googlemail.com>
Link: https://lore.kernel.org/r/20240209090157.3232-1-tklightforce@googlemail.com
[groeck: Fixed up commit message]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The return path can be improved by returning upon first failure. The
current implementation would try to register the second interrupt even
if the first one failed, which is unnecessary.
Moreover, if no irqs are available, the return value should be zero
(the driver supports the use case with no interrupts). Currently the
initial value is unassigned and that may lead to returning an unknown
value if stack variables are not automatically set to zero and no irqs
were provided.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/linux-hwmon/294e4634-89d4-415e-a723-b208d8770d7c@gmail.com/T/#t
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20240207-chipcap2_init_vars-v1-2-08cafe43e20e@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The reg_val variable in cc2_get_reg_val() might be used without a known
value if cc2_read_reg() fails. That leads to a useless data conversion
because the returned error means the read operation failed and the data is
not relevant.
That makes its initial value irrelevant as well, so skip the data
conversion instead. If no error happens, a value is assigned to reg_val
and the data conversion is required.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/linux-hwmon/294e4634-89d4-415e-a723-b208d8770d7c@gmail.com/T/#t
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20240207-chipcap2_init_vars-v1-1-08cafe43e20e@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The total memory needed for saving per core temperature data depends on
the number of cores in a package. Using static allocated memory wastes
memories on systems with low per package core count.
Improve the code to use dynamic allocated memory so that it can be
improved further when per package core count information becomes
available.
No functional change intended.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Link: https://lore.kernel.org/r/20240202092144.71180-12-rui.zhang@intel.com
[groeck: Fixed continuation line alignment]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
temp_data->index saves the index in pdata->core_data[]. It is not used
by package temp_data.
Use temp_data->index as the indicator of package temp_data and remove
redundant temp_data->is_pkg_data.
No functional change.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Link: https://lore.kernel.org/r/20240202092144.71180-11-rui.zhang@intel.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Saving package temp_data and core temp_data in one array with different
offsets is fragile.
Split them and clean up crabbed maths and macros. This also fixes a
problem that pdata->core_data[0] was never used.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Link: https://lore.kernel.org/r/20240202092144.71180-10-rui.zhang@intel.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
coretemp driver has an obscure and fragile logic for handling package
and core temperature data.
Place the logic in newly introduced helpers for further optimizations.
No functional change.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Link: https://lore.kernel.org/r/20240202092144.71180-9-rui.zhang@intel.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
pdata->cpu_map[] saves the mapping between cpu core id and the index in
pdata->core_data[]. This is used to find the temp_data structure using
cpu_core_id, by traversing the pdata->cpu_map[] array. But the same goal
can be achieved by traversing the pdata->core_temp[] array directly.
Remove redundant pdata->cpu_map[].
No functional change.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Link: https://lore.kernel.org/r/20240202092144.71180-8-rui.zhang@intel.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Replace sensor_device_attribute with device_attribute because
sensor_device_attribute->index is no longer used.
No functional change.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Link: https://lore.kernel.org/r/20240202092144.71180-7-rui.zhang@intel.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
When sensor_device_attribute pointer is available, use container_of() to
get the temp_data address.
This removes the unnecessary dependency of cached index in
pdata->core_data[].
No functional change.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Link: https://lore.kernel.org/r/20240202092144.71180-6-rui.zhang@intel.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Introduce enum coretemp_attr_index to better describe the index of each
sensor attribute.
No functional change.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Link: https://lore.kernel.org/r/20240202092144.71180-5-rui.zhang@intel.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
This driver exposes hardware sensors of the ASUS ROG RYUJIN II 360
all-in-one CPU liquid cooler, which communicates through a proprietary
USB HID protocol. Report offsets were initially discovered in [1] by
Florian Freudiger.
Available sensors are pump, internal and external
(controller) fan speed in RPM, their duties in PWM, as well as
coolant temperature.
Attaching external fans to the controller is optional and allows them
to be controlled from the device. If not connected, the fan-related
sensors will report zeroes. The controller is a separate hardware unit
that comes bundled with the AIO and connects to it to allow fan control.
The addressable LCD screen is not supported in this
driver and should be controlled through userspace tools.
[1]: https://github.com/liquidctl/liquidctl/pull/653
Tested-by: Florian Freudiger <florian.freudiger@proton.me>
Signed-off-by: Aleksa Savic <savicaleksa83@gmail.com>
Link: https://lore.kernel.org/r/20240108094453.22986-1-savicaleksa83@gmail.com
[groeck: Add HID dependency]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
This driver enables hardware monitoring support for NZXT Kraken
X53/X63/X73 and Z53/Z63/Z73 all-in-one CPU liquid coolers.
All models expose liquid temperature and pump speed (in RPM), as well as
PWM control (natively only through a temp-PWM curve, but the driver also
emulates fixed PWM control on top of that). The Z-series models
additionally expose the speed and duty of an optionally connected fan,
with the same PWM control capabilities.
Pump and fan duty control mode can be set through pwm[1-2]_enable,
where 1 is for the manual control mode and 2 is for the liquid temp
to PWM curve mode. Writing a 0 disables control of the channel through
the driver after setting its duty to 100%. As it is not possible to query
the device for the active mode, the driver keeps track of it.
The temperature of the curves relates to the fixed [20-59] C range, per
device limitations, and correlating to the detected liquid temperature.
Only PWM values (ranging from 0-255) can be set.
The addressable RGB LEDs and LCD screen, included only on Z-series models,
are not supported in this driver.
Co-developed-by: Jonas Malaco <jonas@protocubo.io>
Signed-off-by: Jonas Malaco <jonas@protocubo.io>
Co-developed-by: Yury Zhuravlev <stalkerg@gmail.com>
Signed-off-by: Yury Zhuravlev <stalkerg@gmail.com>
Signed-off-by: Aleksa Savic <savicaleksa83@gmail.com>
Link: https://lore.kernel.org/r/20240129111932.368232-1-savicaleksa83@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The Amphenol ChipCap 2 is a capacitive polymer humidity and temperature
sensor with an integrated EEPROM and minimum/maximum humidity alarms.
All device variants offer an I2C interface and depending on the part
number, two different output modes:
- CC2D: digital output
- CC2A: analog (PDM) output
This driver adds support for the digital variant (CC2D part numbers),
which includes the following part numbers:
- non-sleep measurement mode (CC2D23, CC2D25, CC2D33, CC2D35)
- sleep measurement mode (CC2D23S, CC2D25S, CC2D33S, CC2D35S)
The Chipcap 2 EEPROM can be accessed to configure a series of parameters
like the minimum/maximum humidity alarm threshold and hysteresis. The
EEPROM is only accessible in the command window after a power-on reset.
The default window lasts 10 ms if no Start_CM command is sent. After the
command window is finished (either after the mentioned timeout of after
a Start_NOM command is sent), the device enters the normal operation
mode and makes a first measurement automatically.
Unfortunately, the device does not provide any hardware or software
reset and therefore the driver must trigger power cycles to enter the
command mode. A dedicated, external regulator is required for that.
This driver keeps the device off until a measurement or access to the
EEPROM is required, making use of the first automatic measurement to
avoid different code paths for sleep and non-sleep devices.
The minimum and maximum humidity alarms are configured with two
registers per alarm: one stores the alarm threshold and the other one
keeps the value that turns off the alarm. The alarm signals are only
updated when a measurement is carried out.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20240130-topic-chipcap2-v6-5-260bea05cf9b@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Add min_alarm and max_alarm attributes for humidityX to support devices
that can generate these alarms.
Such attributes already exist for other magnitudes such as tempX.
Tested with a ChipCap 2 temperature-humidity sensor.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20240130-topic-chipcap2-v6-2-260bea05cf9b@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache.
Signed-off-by: Bo Liu <liubo03@inspur.com>
Link: https://lore.kernel.org/r/20240202072235.41614-1-liubo03@inspur.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache.
Signed-off-by: Bo Liu <liubo03@inspur.com>
Link: https://lore.kernel.org/r/20240202072039.41419-1-liubo03@inspur.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache.
Signed-off-by: Bo Liu <liubo03@inspur.com>
Link: https://lore.kernel.org/r/20240202072007.41316-1-liubo03@inspur.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache.
Signed-off-by: Bo Liu <liubo03@inspur.com>
Link: https://lore.kernel.org/r/20240202071927.41213-1-liubo03@inspur.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache.
Signed-off-by: Bo Liu <liubo03@inspur.com>
Link: https://lore.kernel.org/r/20240202071800.41113-1-liubo03@inspur.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache.
Signed-off-by: Bo Liu <liubo03@inspur.com>
Link: https://lore.kernel.org/r/20240202071628.40990-1-liubo03@inspur.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
