Commit Graph

2998 Commits

Author SHA1 Message Date
Seungwon Jeon
10b498419f mmc: dw_mmc: move supports-highspeed of quirks to caps
'supports-highspeed' is not one of the quirks but is a capability.
So, it's removed from quirks.

Signed-off-by: Seungwon Jeon <tgih.jun@samsung.com>
Tested-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-09-25 21:34:06 -04:00
Seungwon Jeon
5dd63f5246 mmc: dw_mmc: add the capability to support hs200 mode
As host controller can support eMMC's HS200 mode at 1.8V or 1.2V,
these capability will be added.

Signed-off-by: Seungwon Jeon <tgih.jun@samsung.com>
Tested-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-09-25 21:33:53 -04:00
Seungwon Jeon
c6d9deda64 mmc: dw_mmc: exynos: adjust the clock rate with speed mode
Exynos's host has divider logic before 'cclk_in' to controller core.
It means that actual clock rate of ciu clock comes from this divider
value. So, source clock should be adjusted along with 'ciu_div' which
indicates the host's divider ratio. Setting clock rate basically fits
the required speed. Specially, 'cclk_in' should have double rate of
target speed in case of DDR 8-bit mode.

Signed-off-by: Seungwon Jeon <tgih.jun@samsung.com>
Tested-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-09-25 21:33:45 -04:00
Seungwon Jeon
c537a1c5ff mmc: dw_mmc: exynos: add variable delay tuning sequence
Implements variable delay tuning. In this change, exynos host can
determine the correct sampling point for the HS200 and SDR104 speed mode.

Signed-off-by: Seungwon Jeon <tgih.jun@samsung.com>
Tested-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-09-25 21:33:21 -04:00
Seungwon Jeon
0976f16d2d mmc: dw_mmc: add support tuning scheme
For the speed modes HS200 and SDR104, tuning is needed to determine the
correct sampling point. Actual tuning procedure is provided by specific
host controller driver.  This patch defines the tuning command and
tuning data.  Additionally, 'struct dw_mci_slot' is moved to header
file to consider the extensive usages in driver.

Signed-off-by: Seungwon Jeon <tgih.jun@samsung.com>
Tested-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-09-25 21:32:59 -04:00
Yuvaraj Kumar C D
6bce431ca1 mmc: dw_mmc: exynos: configure SMU in exynos5420
Exynos5420 Mobile Storage Host controller has Security Management
Unit (SMU) for channel 0 and channel 1 (mainly for eMMC).
This time, SMU configuration is set for non-encryption mode.

Signed-off-by: Yuvaraj Kumar C D <yuvaraj.cd@samsung.com>
Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com>
Tested-by: Jaehoon Chung <jh80.chung@samsung.com>
Acked-by: Seungwon Jeon <tgih.jun@samsung.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-09-25 21:32:46 -04:00
Yuvaraj Kumar C D
002f0d5c63 mmc: dw_mmc: move the platform specific init call
Current platform specific private data initialization call
dw_mci_exynos_priv_init() can be used to do platform specific
initialization of SMU and others in future. So the drv_data->init
call has moved to dw_mci_probe().

Signed-off-by: Yuvaraj Kumar C D <yuvaraj.cd@samsung.com>
Tested-by: Alim Akhtar <alim.akhtar@samsung.com>
Tested-by: Jaehoon Chung <jh80.chung@samsung.com>
Acked-by: Seungwon Jeon <tgih.jun@samsung.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-09-25 21:32:40 -04:00
Yuvaraj Kumar C D
3aa741f395 mmc: dw_mmc: socfpga: move socfpga private init
Currently platform specific private data initialization is done by
dw_mci_socfpga_priv_init and dw_mci_socfpga_parse_dt. As we already have
separate platform specific device tree parser dw_mci_socfpga_parse_dt,
move the dw_mci_socfpga_priv_init code to dw_mci_socfpga_parse_dt.
We can use the dw_mci_socfpga_priv_init to do some actual platform
specific initialization.

Signed-off-by: Yuvaraj Kumar C D <yuvaraj.cd@samsung.com>
Tested-by: Alim Akhtar <alim.akhtar@samsung.com>
Tested-by: Jaehoon Chung <jh80.chung@samsung.com>
Acked-by: Seungwon Jeon <tgih.jun@samsung.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-09-25 21:32:32 -04:00
Yuvaraj Kumar C D
e6c784eded mmc: dw_mmc: exynos: move the exynos private init
Currently platform specific private data initialization is done by
dw_mci_exynos_priv_init and dw_mci_exynos_parse_dt. As we already have
separate platform specific device tree parser dw_mci_exynos_parse_dt,
move the dw_mci_exynos_priv_init code to dw_mci_exynos_parse_dt.
We can use the dw_mci_exynos_priv_init to do some actual platform
specific initialization of SMU and etc.

Signed-off-by: Yuvaraj Kumar C D <yuvaraj.cd@samsung.com>
Tested-by: Alim Akhtar <alim.akhtar@samsung.com>
Tested-by: Jaehoon Chung <jh80.chung@samsung.com>
Acked-by: Seungwon Jeon <tgih.jun@samsung.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-09-25 21:32:20 -04:00
Doug Anderson
2eb2944fa7 mmc: dw_mmc: Set timeout to max upon resume
The TMOUT register is set to 0xffffffff at probe time but isn't
set after suspend/resume.  Add an init of this value.

No problems were observed without this (it will also be set in
__dw_mci_start_request if there is data to send), but it makes the
register dump before and after suspend cleaner.

Signed-off-by: Doug Anderson <dianders@chromium.org>
Acked-by: Seungwon Jeon <tgih.jun@samsung.com>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-09-25 21:32:11 -04:00
Doug Anderson
fdf492a1cc mmc: dw_mmc: Honor requests to set the clock to 0
Previously the dw_mmc driver would ignore any requests to disable the
card's clock.  This doesn't seem like a good thing in general, but had
one extra bad side effect in the following situation:
* mmc core would set clk to 400kHz at boot time while scanning
* mmc core would set clk to 0 since no card, but it would be ignored.
* suspend to ram and resume; clocks in the dw_mmc IP block are now 0
  but dw_mmc thinks that they're 400kHz (it ignored the set to 0).
* insert card
* mmc core would set clk to 400kHz which would be considered a no-op.

Note that if there is no card in the slot and we do a suspend/resume
cycle, we _do_ still end up with differences in a dw_mmc register
dump, but the differences are clock related and we've got the clock
disabled both before and after, so this should be OK.

Signed-off-by: Doug Anderson <dianders@chromium.org>
Signed-off-by: Seungwon Jeon <tgih.jun@samsung.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-09-25 21:32:04 -04:00
Doug Anderson
e2c635999f mmc: dw_mmc: Add exynos resume_noirq callback to clear WAKEUP_INT
If the WAKEUP_INT is asserted at wakeup and not cleared, we'll end up
looping around forever.  This has been seen to happen on exynos5420
silicon despite the fact that we haven't enabled any wakeup events due
to a silicon errata.  It is safe to do on all exynos variants.

Signed-off-by: Doug Anderson <dianders@chromium.org>
Acked-by: Seungwon Jeon <tgih.jun@samsung.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-09-25 21:31:52 -04:00
Doug Anderson
369ac8614f mmc: dw_mmc: don't queue up a card detect at slot startup
The MMC subsystem handles looking for a card at probe time. Queuing up our
own can race with the rest of the MMC subsystem and cause problems if we
get unlucky with timing. Just remove driver own detection triggering.  While
progressing the request from 'mmc_rescan', if 'dw_mci_work_routine_card'
routine is activated, it will cancel the current request. The problem case
is that 'mmc_rescan' is prior to 'dw_mci_work_routine_card' from host own.
Specifically, the following message shows the detection problem in driver's
probing. It would get an err -123 (-ENOMEDIUM) during probe.

[    4.216595] dwmmc_exynos 12210000.dwmmc1: Using internal DMA controller.
[    4.395935] dwmmc_exynos 12210000.dwmmc1: Version ID is 250a
[    4.401948] dwmmc_exynos 12210000.dwmmc1: DW MMC controller at irq 108, 64 bit host data width, 64 deep fifo
[    4.424430] dwmmc_exynos 12210000.dwmmc1: sdr0 mode (irq=108, width=0)
[    4.453975] dwmmc_exynos 12210000.dwmmc1: sdr0 mode (irq=108, width=0)
[    4.459592] mmc_host mmc1: Bus speed (slot 0) = 100000000Hz (slot req 400000Hz, actual 400000HZ div = 125)
[    4.484258] dwmmc_exynos 12210000.dwmmc1: 1 slots initialized
[    4.485406] dwmmc_exynos 12210000.dwmmc1: sdr0 mode (irq=108, width=0)
[    4.487606] dwmmc_exynos 12210000.dwmmc1: sdr0 mode (irq=108, width=0)
[    4.489794] dwmmc_exynos 12210000.dwmmc1: sdr0 mode (irq=108, width=0)
[    4.509757] mmc1: error -123 whilst initialising SDIO card

Signed-off-by: Doug Anderson <dianders@chromium.org>
Acked-by: Seungwon Jeon <tgih.jun@samsung.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-09-25 21:31:22 -04:00
Grant Grundler
b83e867026 mmc: core: remove dead function mmc_try_claim_host
cscope says there are no callers for mmc_try_claim_host in the kernel.
No reason to keep it.

Signed-off-by: Grant Grundler <grundler@chromium.org>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-09-25 21:26:29 -04:00
Martin Schwidefsky
0244ad004a Remove GENERIC_HARDIRQ config option
After the last architecture switched to generic hard irqs the config
options HAVE_GENERIC_HARDIRQS & GENERIC_HARDIRQS and the related code
for !CONFIG_GENERIC_HARDIRQS can be removed.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-09-13 15:09:52 +02:00
Linus Torvalds
d0048f0b91 MMC highlights for 3.12:
Core:
  - Support Allocation Units 8MB-64MB in SD3.0, previous max was 4MB.
  - The slot-gpio helper can now handle GPIO debouncing card-detect.
  - Read supported voltages from DT "voltage-ranges" property.
 
 Drivers:
  - dw_mmc: Add support for ARC architecture, and support exynos5420.
  - mmc_spi: Support CD/RO GPIOs.
  - sh_mobile_sdhi: Add compatibility for more Renesas SoCs.
  - sh_mmcif: Add DT support for DMA channels.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.13 (GNU/Linux)
 
 iQIcBAABAgAGBQJSLxu8AAoJEHNBYZ7TNxYMkV8P/RZMkP3L88wPmvdQ4IxVD/Bg
 jphPsZTAlY8pLY7EcBVfbIGfBMMoVZ8CayuAbj9u5jFiMBNDUKRnKrky1m95F62n
 xXiS5vUiKdWpByMpfKmrqvJr6eS8SWq5z/yug1c3s1Y9T363KgfypgJLvNgbMGiv
 qbmjE+Zw65nMwHCk+4Rvq6s4aN6KosRZP0ABsn1foXt3kybSgemp5ShrlEyXohfS
 E91EiYxHFC4fdmuWiZZvL1tyHFeV25omyZA90mpkioNItiwoyOM2rfjfEfNq+WBw
 UrmdBesbGsF0Zi12CBa9LtzdRjYK8PugBWKW3mycS5++NX9KW6Ac/EpGqFeH9KgL
 WZ2v4aQjkbnzQKUB2HcWAyXm88G9MkNvpLbIrmIPtson+q0UjgPYWe5BI3dy/Y1v
 YS1JeseslVtSTKzGYsa1GJ7Nc1xYiILRz0RS4YGYXNjwvrl89i2UH7cglYDW36Xd
 vxvRBaFpVsj1mfjjITEoG6nE0v5aYH6gSITY79XR+/kN871/99/oIUaWdpjcm9yv
 SIYmK7ipcvxugkQ7BoMGbym/dvuUrZ+Vnf8dFlGPTJegZVsnfgrVAnRpvcVwW8+x
 4Z79wUPSIETRqj2XX2I/Y0JnrXry+dLLVyeK1tELoeOKev73Ai2lcqPSz6J0tzJs
 IErcz0hM1znL2RtgNwio
 =+EYB
 -----END PGP SIGNATURE-----

Merge tag 'mmc-updates-for-3.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc

Pull MMC updates from Chris Ball:
 "MMC highlights for 3.12:

  Core:
   - Support Allocation Units 8MB-64MB in SD3.0, previous max was 4MB.
   - The slot-gpio helper can now handle GPIO debouncing card-detect.
   - Read supported voltages from DT "voltage-ranges" property.

  Drivers:
   - dw_mmc: Add support for ARC architecture, and support exynos5420.
   - mmc_spi: Support CD/RO GPIOs.
   - sh_mobile_sdhi: Add compatibility for more Renesas SoCs.
   - sh_mmcif: Add DT support for DMA channels"

* tag 'mmc-updates-for-3.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: (50 commits)
  Revert "mmc: tmio-mmc: Remove .set_pwr() callback from platform data"
  mmc: dw_mmc: Add support for ARC
  mmc: sdhci-s3c: initialize host->quirks2 for using quirks2
  mmc: sdhci-s3c: fix the wrong register value, when clock is disabled
  mmc: esdhc: add support to get voltage from device-tree
  mmc: sdhci: get voltage from sdhc host
  mmc: core: parse voltage from device-tree
  mmc: omap_hsmmc: use the generic config for omap2plus devices
  mmc: omap_hsmmc: clear status flags before starting a new command
  mmc: dw_mmc: exynos: Add a new compatible string for exynos5420
  mmc: sh_mmcif: revision-specific CLK_CTRL2 handling
  mmc: sh_mmcif: revision-specific Command Completion Signal handling
  mmc: sh_mmcif: add support for Device Tree DMA bindings
  mmc: sh_mmcif: move header include from header into .c
  mmc: SDHI: add DT compatibility strings for further SoCs
  mmc: dw_mmc-pci: enable bus-mastering mode
  mmc: dw_mmc-pci: get resources from a proper BAR
  mmc: tmio-mmc: Remove .set_pwr() callback from platform data
  mmc: tmio-mmc: Remove .get_cd() callback from platform data
  mmc: sh_mobile_sdhi: Remove .set_pwr() callback from platform data
  ...
2013-09-10 13:33:09 -07:00
Linus Torvalds
8de4651abe For the 3.12 merge window we have one new driver for the DA9063 PMIC
from Dialog Semiconductor.
 
 Besides that driver we also have:
 
 - Device tree support for the s2mps11 driver
 
 - More devm_* conversion for the pm8921, max89xx, menelaus, tps65010,
   wl1273 and pcf50633-adc drivers.
 
 - A conversion to threaded IRQ and IRQ domain for the twl6030 driver.
 
 - A fairly big update for the rtsx driver: Better power saving support,
   better vendor settings handling, and a few fixes.
 
 - Support for a couple more boards (COMe-bHL6 and COMe-cTH6) for the
   Kontron driver.
 
 - A conversion to the dev_get_platdata() API for all MFD drivers.
 
 - A removal of non-DT (legacy) support for the twl6040 driver.
 
 - A few fixes and additions (Mic detect level) to the wm5110 register tables.
 
 - Regmap support for the davinci_voicecodec driver.
 
 - The usual bunch of minor cleanups and janitorial fixes.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIcBAABAgAGBQJSKFnjAAoJEIqAPN1PVmxKU9AP/RAmSYux6c+cd7P7roXL+/lA
 qNKy8Op31J51N/n918o7zwbskmRIJJsbd+I6ClBlYdCUB+B8/Oj41uD4F+q35b/H
 F5Xm2XRPQAGHx37m5adJMrK/OR3zCTwhPjleJYOJWIFjDP/nDNJIPwTYb13Rqurh
 V39icmRtnNR0uDOmv3eELyV4FnWQTpA858dxuhSi+5jbbHFhCcYShEmE9109eexl
 RNuyF8d0KPGvnKhK+H1/k4ZYG2XAFFOZfZz9MB+l651nidqDvwJph0Zdj3w1r112
 8OR5i7B3vw268nmyjOOUtYqL2vOaUW4lavmLTQiSdQWd1BHv9hEmD0RRR5bSrLeH
 6DwCTh0+xWH08ogbMwi4dwZyRhjxMPMpkxeNz51TpRnXKDSZmBgrjovKNJpP8pW6
 m7RsgUC9AiEQf/Ac0PBMrU8ABKeJnt3K3ZZp4YN7/H6rAMOhXjLqFD8JLoFvx08z
 itKKSzVaIA3pzxpnkWWiTsr+bChaSOrHHy1biWa4ve5pvrFc9ivPz1DhL3PTmXpp
 haeeylFG01r5NJIHeJewRsmUJk67aEyeAnnoLwqCRycWjdDmcCBC5bgDBkRRonoS
 93tgKVzL9q/NwvT5Uatw3uYqTN0jOuH0t39gAzu9uwnWvivcZK5EBYh789YQL+on
 zih4qUICM08yWRDNNDgF
 =a7dU
 -----END PGP SIGNATURE-----

Merge tag 'mfd-3.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-next

Pull MFD (multi-function device) updates from Samuel Ortiz:
 "For the 3.12 merge window we have one new driver for the DA9063 PMIC
  from Dialog Semiconductor.

  Besides that driver we also have:

   - Device tree support for the s2mps11 driver

   - More devm_* conversion for the pm8921, max89xx, menelaus, tps65010,
     wl1273 and pcf50633-adc drivers.

   - A conversion to threaded IRQ and IRQ domain for the twl6030 driver.

   - A fairly big update for the rtsx driver: Better power saving
     support, better vendor settings handling, and a few fixes.

   - Support for a couple more boards (COMe-bHL6 and COMe-cTH6) for the
     Kontron driver.

   - A conversion to the dev_get_platdata() API for all MFD drivers.

   - A removal of non-DT (legacy) support for the twl6040 driver.

   - A few fixes and additions (Mic detect level) to the wm5110 register
     tables.

   - Regmap support for the davinci_voicecodec driver.

   - The usual bunch of minor cleanups and janitorial fixes"

* tag 'mfd-3.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-next: (81 commits)
  mfd: ucb1x00-core: Rewrite ucb1x00_add_dev()
  mfd: ab8500-debugfs: Apply a check for -ENOMEM after allocating memory for event name
  mfd: ab8500-debugfs: Apply a check for -ENOMEM after allocating memory for sysfs
  mfd: timberdale: Use module_pci_driver
  mfd: timberdale: Remove redundant break
  mfd: timberdale: Staticize local variables
  mfd: ab8500-debugfs: Staticize local variables
  mfd: db8500-prcmu: Staticize clk_mgt
  mfd: db8500-prcmu: Use ANSI function declaration
  mfd: omap-usb-host: Staticize usbhs_driver_name
  mfd: 88pm805: Fix potential NULL pdata dereference
  mfd: 88pm800: Fix potential NULL pdata dereference
  mfd: twl6040: Use regmap for register cache
  mfd: davinci_voicecodec: Provide a regmap for register I/O
  mfd: davinci_voicecodec: Remove unused read and write functions
  mmc: memstick: rtsx: Modify copyright comments
  mmc: rtsx: Clear SD_CLK toggle enable bit if switching voltage fail
  mfd: mmc: rtsx: Change default tx phase
  mfd: pcf50633-adc: Use devm_*() functions
  mfd: rtsx: Copyright modifications
  ...
2013-09-07 20:14:19 -07:00
Linus Torvalds
44598f98b9 ARM: SoC board updates for 3.12
Board updates for 3.12. Again, a bit of domain overlap with SoC and DT branches,
 but most of this is around legacy code and board support. We've found that
 platform maintainers have a hard time separating all of these out and might
 move towards fewer branches for next release.
 
 - Removal of a number of Marvell Kirkwood board files, since contents
   is now common and mostly configured via DT.
 - Device-tree updates for Marvell Dove, including irqchip and clocksource
   setup.
 - Defconfig updates. Gotta go somewhere. One new one for Renesas Lager.
 - New backlight drivers for backlights used on Renesas shmobile platforms.
 - Removal of Renesas leds driver.
 - Shuffling of some of the new Broadcom platforms to give room for others in
   the same mach directory. More in 2.13.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJSKhrfAAoJEIwa5zzehBx3OOAQAJCWhoYaHvWmyAf+xCOQNpX2
 YgAngENW04VpHFOyn6BtoGv6+5JypdB2TmK3GHHlVJd1Im5mD1wgm8hAfgyV8lQ4
 UeJULdA2HZAstKeTirO65BIyUb5QIrWakF24ccfIfg2xeScM8FV0m8cmzeo3fYAf
 DmmeoSCmvTdu/cDWBNlsQZ/as8qCQwyF+5kZg+SMl1btA1Publu2I5lDE02TH46d
 sc5mN+ihw0JG62EJV7pov6uVyeFLExoTbrNfQZ4rixmKkMDS/jq5ZbBS5c0i8ULF
 s1UMSZtYTcUO9rAPv3+MOIc7fq7nKo9lLuwMrA1HHUEDJ2BEi8DIp99F+ZYm/MSL
 WpVxYNwOobPcMJBYGR2fy4GgpIyWB285GgrBUxcq7t0Xi4uBbptwjLhDE4d7LREV
 8guW251R+OEVPYcwFctsubnox0MViyC3CQ1FaAAdtTjpSKomlhk/yaxaQ9nGrxls
 QCZgXHWm4Ir3QYv8XfOn0X9vdP81EnX11SiwtrRSJ71QMs814nB8NdPDqU4VHsw8
 exKmqjq/Lt+F9Kpxn/FevNNuYOdefZNQi00yl3ERchdIGdvRwE/0yA0D69mpwIVr
 E41UwvH3g43vazCo2PMdWPWuFlpGMR3iZ4pXnDLH/w33ppfJWfokYwKSRQ/mu/MN
 LMjkwoZn1X+fZzNSh9/G
 =EGua
 -----END PGP SIGNATURE-----

Merge tag 'boards-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC board updates from Olof Johansson:
 "Board updates for 3.12.  Again, a bit of domain overlap with SoC and
  DT branches, but most of this is around legacy code and board support.
  We've found that platform maintainers have a hard time separating all
  of these out and might move towards fewer branches for next release.

   - Removal of a number of Marvell Kirkwood board files, since contents
     is now common and mostly configured via DT.
   - Device-tree updates for Marvell Dove, including irqchip and
     clocksource setup.
   - Defconfig updates.  Gotta go somewhere.  One new one for Renesas
     Lager.
   - New backlight drivers for backlights used on Renesas shmobile
     platforms.
   - Removal of Renesas leds driver.
   - Shuffling of some of the new Broadcom platforms to give room for
     others in the same mach directory.  More in 3.13"

* tag 'boards-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (67 commits)
  mmc: sdhci-bcm-kona: Staticize sdhci_bcm_kona_card_event
  mmc: sdhci-bcm-kona: Remove unneeded version.h inclusion
  ARM: bcm: Make secure API call optional
  ARM: DT: binding fixup to align with vendor-prefixes.txt (drivers)
  ARM: mmc: fix NONREMOVABLE test in sdhci-bcm-kona
  ARM: bcm: Rename board_bcm
  mmc: sdhci-bcm-kona: make linker-section warning go away
  ARM: tegra: defconfig updates
  ARM: dove: add initial DT file for Globalscale D2Plug
  ARM: dove: add GPIO IR receiver node to SolidRun CuBox
  ARM: dove: add common pinmux functions to DT
  ARM: dove: add cpu device tree node
  ARM: dove: update dove_defconfig with SI5351, PCI, and xHCI
  arch/arm/mach-kirkwood: Avoid using ARRAY_AND_SIZE(e) as a function argument
  ARM: kirkwood: fix DT building and update defconfig
  ARM: kirkwood: Remove all remaining trace of DNS-320/325 platform code
  ARM: configs: disable DEBUG_LL in bcm_defconfig
  ARM: bcm281xx: Board specific reboot code
  ARM bcm281xx: Turn on socket & network support.
  ARM: bcm281xx: Turn on L2 cache.
  ...
2013-09-06 13:34:43 -07:00
Chris Ball
9d731e7539 Revert "mmc: tmio-mmc: Remove .set_pwr() callback from platform data"
This reverts commit 3af9d15c71, which
causes a build failure:

drivers/mfd/asic3.c:724:2: error: unknown field 'set_pwr' specified in initializer
2013-09-06 07:29:05 -04:00
Wei WANG
6228218064 mmc: memstick: rtsx: Modify copyright comments
Update copyright date, and remove author address.

Signed-off-by: Wei WANG <wei_wang@realsil.com.cn>
Acked-by: Chris Ball <cjb@laptop.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-08-30 14:25:10 +02:00
Wei WANG
1b8055b490 mmc: rtsx: Clear SD_CLK toggle enable bit if switching voltage fail
If switching voltage fails, SD_CLK toggle enable bit should been cleared
so that SD host can control SD clock automatically.

Signed-off-by: Wei WANG <wei_wang@realsil.com.cn>
Acked-by: Chris Ball <cjb@laptop.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-08-30 14:25:00 +02:00
Wei WANG
84d72f9cc2 mfd: mmc: rtsx: Change default tx phase
The default phase can meet most cards' requirement, but it is not the
optimal one. In some extreme situation, the rx phase point produced by
the following tuning process will drift quite a distance.
Before tuning UHS card, this patch will set a more proper initial tx
phase point, which is calculated from statistic data, and can achieve
a much better tx signal quality.

Signed-off-by: Wei WANG <wei_wang@realsil.com.cn>
Acked-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Chris Ball <cjb@laptop.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-08-30 14:24:07 +02:00
Mischa Jonker
b7d06c85a3 mmc: dw_mmc: Add support for ARC
Adapt Kconfig to include ARC in supported architectures

Signed-off-by: Mischa Jonker <mjonker@synopsys.com>
Acked-by: Seungwon Jeon <tgih.jun@samsung.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-08-29 21:57:24 -04:00
Jaehoon Chung
285e244fef mmc: sdhci-s3c: initialize host->quirks2 for using quirks2
In order to use the quirks2, initialized the host->quirks2.

Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Kyungmin Park <Kyungmin.park@samsung.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-08-29 21:19:13 -04:00
Jaehoon Chung
7ef2a5e2f7 mmc: sdhci-s3c: fix the wrong register value, when clock is disabled
When use the QUIRK_NONSTANDARD_CLOCK, then never set to 0 at clock control
register.  This patch fixes this problem.

Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-08-29 21:17:15 -04:00
Olof Johansson
4e5f67fa53 Late changes for 3.12 broadcom driver
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJSHN/2AAoJEJZlErUPt2pxRkAP/jrhrUz9N9nTCB/aRIoVamjG
 u/ufxnRzZ683tX4xiBzFPvidhS7e9zWQ1BKvptjYeWSwsVLgtOhFuXResjz7FVye
 zw6eIySYjhLz4s7FSiwg1gdG8JtYxpnSdGZRSKy2q9IA50ZplHuQFDtiI1SUuuLA
 Lj4kttvF/LiGXuxK+hfbajlK2GqFa4hycC8zHKIBQVIaboeNFl+k8xV8yZX+646O
 HmX5hOGR2s3Hzk6mNLQIbi9IfEzowp8tjHKVV2ge1DMWlZyP9/lUfkmRahf1ieW/
 spEw57/rnSwTqIqU43zMRf4JilUgVV96MhqBHg2oWnnH4HOJcH9350YOgkEj1iHS
 hs/saL63UDBhKRgpf3Eci7nUKjH1i4RB1BED3r37V3eCtoIp+MSfv/InNUh4x0xQ
 6OSE2UVd0OzUxARcVa04FRbsMrNgAxmfzdoZ1eyl9gQhqj/+g6z2nKk5deJ6lOzk
 xu5tQLHyavbLL+Gq9A8/cAUDb64Ga2XIlf5IKq9AwUTzvBVJwhrxgXKjzacV/P3J
 i89HhkvNfmFK5N1mMyM19KFUNnGdHe7n+U1cvpDHccl6f1LOTSZVIEH8yyJU9zx7
 V00AvvlWMfy64pQvmUO9lonUdVnBN4gVY8jWezCQovBh/25ejwJjY08IiJU/HdgI
 OPQUHpK19XNiEVsgnTks
 =mpcX
 -----END PGP SIGNATURE-----

Merge tag 'bcm-for-3.12-late-soc' of git://github.com/broadcom/bcm11351 into next/boards

From Christian Daudt, late changes for 3.12 broadcom mmc driver. Small
trivial changes so I'll take them through arm-soc.

* tag 'bcm-for-3.12-late-soc' of git://github.com/broadcom/bcm11351:
  mmc: sdhci-bcm-kona: Staticize sdhci_bcm_kona_card_event
  mmc: sdhci-bcm-kona: Remove unneeded version.h inclusion
2013-08-29 16:47:53 -07:00
Sachin Kamat
ceb2ea195a mmc: sdhci-bcm-kona: Staticize sdhci_bcm_kona_card_event
sdhci_bcm_kona_card_event is referenced only in this file.
Make it static.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Acked-by: Christian Daudt <csd@broadcom.com>
2013-08-27 10:17:25 -07:00
Sachin Kamat
b97d6d0868 mmc: sdhci-bcm-kona: Remove unneeded version.h inclusion
version.h header inclusion is not necessary as detected by
versioncheck.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Acked-by: Christian Daudt <csd@broadcom.com>
2013-08-27 10:17:24 -07:00
Haijun Zhang
490104ac59 mmc: esdhc: add support to get voltage from device-tree
Add suppport to get voltage from device-tree node for esdhc host,
if voltage-ranges was specified in device-tree node we can get
ocr_mask instead of read from host capacity register. If not voltages
still can be get from host capacity register.

Signed-off-by: Haijun Zhang <haijun.zhang@freescale.com>
Acked-by: Anton Vorontsov <anton@enomsg.org>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-08-26 11:32:43 -04:00
Haijun Zhang
c0b887b66c mmc: sdhci: get voltage from sdhc host
We use host->ocr_mask to hold the voltage get from device-tree
node, In case host->ocr_mask was available, we use host->ocr_mask
as the final available voltage can be used by MMC/SD/SDIO card.

Signed-off-by: Haijun Zhang <haijun.zhang@freescale.com>
Reviewed-by: Anton Vorontsov <anton@enomsg.org>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-08-26 11:32:07 -04:00
Haijun Zhang
6e9e318b30 mmc: core: parse voltage from device-tree
Add function to support getting voltage from device-tree.
If voltage-range is specified in device-tree node, this function
will parse it and return the available voltage mask.

Signed-off-by: Haijun Zhang <haijun.zhang@freescale.com>
Acked-by: Anton Vorontsov <anton@enomsg.org>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-08-26 11:31:40 -04:00
Amarinder Bindra
bcf24e1daa mmc: omap_hsmmc: use the generic config for omap2plus devices
OMAP's hs_mmc driver is used for MMC controller operation on many
omap2plus SoCs (OMAP2430, OMAP3, 4, 5 and AM335x).

Considering that the device tree entries are already present for these,
allow the driver to be built using the config ARCH_OMAP2PLUS rather
than individually adding a config for each SoC to enable the
support.

Use COMPILE_TEST to enable the build for other platforms.

Signed-off-by: Amarinder Bindra <a-bindra@ti.com>
Cc: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Cc: Nishanth Menon <nm@ti.com>
Acked-by: Felipe Balbi <balbi@ti.com>
Acked-by: Balaji T K <balajitk@ti.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-08-25 15:50:33 -04:00
Francesco Lavra
7472bab236 mmc: omap_hsmmc: clear status flags before starting a new command
Commit 1f6b9fa40e consolidated writes to
the STAT register in one location, moving them from omap_hsmmc_do_irq()
to omap_hsmmc_irq(). This move has the unwanted side effect that the
controller status flags are potentially cleared after a new command has
been started as a consequence of reading the previous status flags.
This means that if the new command changes the status flags before the
IRQ routine returns, those flags may be cleared without handling the
event which asserted them, and thus missing the event.
Move the writing of the STAT register back in omap_hsmmc_do_irq(),
before handling the status flags which generated the interrupt.

Signed-off-by: Francesco Lavra <francescolavra.fl@gmail.com>
Reviewed-and-Tested-by: Balaji T K <balajitk@ti.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-08-25 15:41:17 -04:00
Yuvaraj Kumar C D
00fd041b0c mmc: dw_mmc: exynos: Add a new compatible string for exynos5420
The Exynos5420 has a DWMMC controller which is different from prior
versions.This patch adds a new compatible string for Exynos5420.

Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Yuvaraj Kumar C D <yuvaraj.cd@samsung.com>
Acked-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-08-25 00:21:42 -04:00
Guennadi Liakhovetski
6d6fd36742 mmc: sh_mmcif: revision-specific CLK_CTRL2 handling
Some newer MMCIF IP revisions contain a CE_CLK_CTRL2 register, that has to
be set for proper operation. Support for this feature is added in a way to
preserve the current behaviour by default, i.e. when it is not enabled
in platform data. Patch is based on work by Nobuyuki HIRAI.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-08-25 00:10:18 -04:00
Guennadi Liakhovetski
967bcb7717 mmc: sh_mmcif: revision-specific Command Completion Signal handling
Some earlier MMCIF IP revisions contained Command Completion Signal
support, which has been dropped again in modern versions. Sopport for
this feature is added in a way to preserve the current behaviour by
default, i.e. when it is not enabled in platform data. Patch is based
on work by Nobuyuki HIRAI.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-08-25 00:10:17 -04:00
Guennadi Liakhovetski
acd6d772a0 mmc: sh_mmcif: add support for Device Tree DMA bindings
To use DMA in the Device Tree case the driver has to be modified
to use suitable API to obtain DMA channels.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-08-25 00:10:15 -04:00
Guennadi Liakhovetski
d00cadacbe mmc: sh_mmcif: move header include from header into .c
sh_dma.h isn't needed in sh_mmcif.h, move it into sh_mmcif.c.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-08-25 00:10:14 -04:00
Guennadi Liakhovetski
af99106ee9 mmc: SDHI: add DT compatibility strings for further SoCs
Add further OF compatibility strings to the SDHI driver to be able to
precisely control driver's behaviour on each of them.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com>
Acked-by: Magnus Damm <damm@opensource.se>
Acked-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-08-25 00:10:13 -04:00
Andy Shevchenko
638585f684 mmc: dw_mmc-pci: enable bus-mastering mode
This patch enables bus-mastering mode for MMC controller to allow IDMAC
transfers.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Seungwon Jeon <tgih.jun@samsung.com>
Tested-by: Prabu Thangamuthu <Prabu.T@synopsys.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-08-25 00:10:12 -04:00
Andy Shevchenko
afeb52d6b5 mmc: dw_mmc-pci: get resources from a proper BAR
There is a typo when the mapped space is from BAR 2, but BAR 0 is
used instead.  This patch fixes the typo.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Prabu Thangamuthu <Prabu.T@synopsys.com>
Acked-by: Seungwon Jeon <tgih.jun@samsung.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-08-25 00:10:05 -04:00
Laurent Pinchart
3af9d15c71 mmc: tmio-mmc: Remove .set_pwr() callback from platform data
The .set_pwr() callback isn't used anymore as all platforms register
GPIO-controlled regulators. Remove it.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-08-24 23:58:13 -04:00
Laurent Pinchart
2b63b341d4 mmc: tmio-mmc: Remove .get_cd() callback from platform data
All platforms pass the CD GPIO number to the driver in the .cd_gpio
field. The .get_cd() callback isn't used anymore, remove it

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-08-24 23:58:12 -04:00
Laurent Pinchart
1036563e14 mmc: sh_mobile_sdhi: Remove .set_pwr() callback from platform data
The .set_pwr() callback isn't used anymore as all platforms register
GPIO-controlled regulators. Remove it.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-08-24 23:58:10 -04:00
Laurent Pinchart
57fcb523e5 mmc: sh_mobile_sdhi: Remove .get_cd() callback from platform data
All platforms pass the CD GPIO number to the driver in the .cd_gpio
field. The .get_cd() callback isn't used anymore, remove it.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-08-24 23:58:09 -04:00
Laurent Pinchart
83a0c7797e mmc: sh_mmcif: Remove .set_pwr() callback from platform data
The .set_pwr() callback isn't used anymore as all platforms register
GPIO-controlled regulators. Remove it.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-08-24 23:58:08 -04:00
Laurent Pinchart
62b6af5c7e mmc: mmc_spi: Remove platform data .get_cd() and .get_ro() callbacks
All platforms now pass the CD and RO GPIOs to the MMC SPI driver, those
callbacks are not used anymore. Remove them.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-08-24 23:58:06 -04:00
Laurent Pinchart
bf287a90ce mmc: mmc_spi: Support CD/RO GPIOs
Add support for passing CD/RO GPIO numbers directly to the mmc_spi
driver instead of relying solely on board code callbacks to retrieve the
CD/RO signals values. The driver will enable debouncing on the card
detect GPIO if the cd_debounce field is set to a non-zero value.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-08-24 23:45:22 -04:00
Laurent Pinchart
214fc309d1 mmc: slot-gpio: Add debouncing capability to mmc_gpio_request_cd()
Add a debounce parameter to the mmc_gpio_request_cd() function that
enables GPIO debouncing when set to a non-zero value. This can be used
by MMC host drivers to enable debouncing on the card detect signal.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-08-24 23:45:09 -04:00
Jingoo Han
7725a52c03 mmc: dw_mmc-pltfm: include 'dw_mmc-pltfm.h'
Include 'dw_mmc-pltfm.h' header file in order to fix the following
sparse warnings:

drivers/mmc/host/dw_mmc-pltfm.c:36:5: warning: symbol 'dw_mci_pltfm_register' was not declared. Should it be static?
drivers/mmc/host/dw_mmc-pltfm.c:94:1: warning: symbol 'dw_mci_pltfm_pmops' was not declared. Should it be static?
drivers/mmc/host/dw_mmc-pltfm.c:118:5: warning: symbol 'dw_mci_pltfm_remove' was not declared. Should it be static?

Suggested-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Acked-by: Seungwon Jeon <tgih.jun@samsung.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-08-24 23:41:01 -04:00